Observium_CE/mibs/enterasys/ENTERASYS-IEEE8021-CFM-EXT-MIB

845 lines
28 KiB
Plaintext

ENTERASYS-IEEE8021-CFM-EXT-MIB DEFINITIONS ::= BEGIN
-- enterasys-ieee8021-cfm-ext-mib.txt
--
-- Part Number:
--
--
-- This module provides authoritative definitions for Enterasys
-- Networks' IEEE8021-CFM-MIB extension mib
--
-- This module will be extended, as needed.
-- Enterasys Networks reserves the right to make changes in this
-- specification and other information contained in this document
-- without prior notice. The reader should consult Enterasys Networks
-- to determine whether any such changes have been made.
--
-- In no event shall Enterasys Networks be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Enterasys
-- Networks has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Enterasys Networks grants vendors, end-users, and other interested
-- parties a non-exclusive license to use this Specification in
-- connection with the management of Enterasys Networks products.
-- Copyright February, 2013 Enterasys Networks, Inc.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
InterfaceIndexOrZero
FROM IF-MIB
TEXTUAL-CONVENTION, TruthValue, MacAddress, TimeStamp
FROM SNMPv2-TC
EnabledStatus
FROM P-BRIDGE-MIB
Dot1agCfmLowestAlarmPri, dot1agCfmMepEntry, dot1agCfmMdIndex,
dot1agCfmMaIndex, Dot1agCfmFngState, Dot1agCfmHighestDefectPri,
Dot1agCfmMepDefects, Dot1agCfmMDLevel, Dot1agCfmMpDirection
FROM IEEE8021-CFM-MIB
IEEE8021ServiceSelectorType, IEEE8021ServiceSelectorValue,
IEEE8021PbbComponentIdentifier
FROM IEEE8021-TC-MIB
etsysModules
FROM ENTERASYS-MIB-NAMES;
etsysIeee8021CfmMibExtMIB MODULE-IDENTITY
LAST-UPDATED "201302151717Z" -- Fri Feb 15 17:17 UTC 2013
ORGANIZATION "Enterasys Networks, Inc"
CONTACT-INFO
"Postal: Enterasys Networks
9 Northeastern Blvd.
Salem, NH 03079 USA
Phone: +1 603 952 5000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com"
DESCRIPTION
"This MIB module defines a portion of the SNMP MIB under
the Enterasys Networks enterprise OID pertaining to
proprietary extensions to the IEEE8021-CFM-MIB."
REVISION "201302151717Z" -- Fri Feb 15 17:17 UTC 2013
DESCRIPTION "Initial version of this MIB module."
::= { etsysModules 524 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
EtsysIeee8021CfmExtMemPoolMaxSize ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Integer that especifies the maximum size of a memory pool."
SYNTAX Unsigned32 (1..5000)
EtsysIeee8021CfmExtMemPool ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention defines the list of CFM-related
memory pools, allocated on the managed entity, that will
be monitored by the CFM application in order to provide
the usage of each memory pool.
memPoolMD(1) Memory pool to store Maintenance Domain
(MD)-related information.
memPoolMA(2) Memory pool to store Maintenance Association
(MA)-related information.
memPoolMEP(3) Memory pool to store Maintenace End Point
(MEP)-related information.
memPoolMAMEP(4) Memory pool to store MA MEP List Entry-related
information.
memPoolRMEP(5) Memory pool to store Remote MEP-related
information
memPoolMHF(6) Memory pool to store MIP Half Function (MHF)-
related information.
memPoolMACOMP(7) Memory pool to store part of the MA Table
that is variable accross the Bridges in a MD,
or across the components of a single Bridge."
SYNTAX INTEGER {
memPoolMD(1),
memPoolMA(2),
memPoolMEP(3),
memPoolMAMEP(4),
memPoolRMEP(5),
memPoolMHF(6),
memPoolMACOMP(7)
}
-- -------------------------------------------------------------
-- Object and Conformance Definitions
-- -------------------------------------------------------------
etsysIeee8021CfmMibExtObjects
OBJECT IDENTIFIER ::= { etsysIeee8021CfmMibExtMIB 1 }
etsysIeee8021CfmMibExtConformance
OBJECT IDENTIFIER ::= { etsysIeee8021CfmMibExtMIB 2 }
-- -------------------------------------------------------------
-- Enterasys CFM Extension Definition
-- -------------------------------------------------------------
etsysIeee8021CfmExtGlobal
OBJECT IDENTIFIER ::= { etsysIeee8021CfmMibExtObjects 1 }
etsysIeee8021CfmExtMep
OBJECT IDENTIFIER ::= { etsysIeee8021CfmMibExtObjects 2 }
-- -------------------------------------------------------------
-- Enterasys CFM Global leave
-- -------------------------------------------------------------
etsysIeee8021CfmExtStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global enabled/disabled status of the CFM functionality
on the managed entity.
enabled(1) - CFM is enabled globally on the managed entity.
disabled(2)- CFM is disabled globally on the managed entity."
DEFVAL { disabled }
::= { etsysIeee8021CfmExtGlobal 1 }
etsysIeee8021CfmExtMemPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysIeee8021CfmExtMemPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides information related to the memory pools allocated
on the managed entity to support configuration of CFM elements.
The following information is provided:
- Memory pool size
- Current number of elements in use
- High water mark of pool usage."
::= { etsysIeee8021CfmExtGlobal 2 }
etsysIeee8021CfmExtMemPoolEntry OBJECT-TYPE
SYNTAX EtsysIeee8021CfmExtMemPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Enterasys Memory Pool table entry."
INDEX { etsysIeee8021CfmExtMemPoolIndex }
::= { etsysIeee8021CfmExtMemPoolTable 1 }
EtsysIeee8021CfmExtMemPoolEntry ::=
SEQUENCE {
etsysIeee8021CfmExtMemPoolIndex
EtsysIeee8021CfmExtMemPool,
etsysIeee8021CfmExtMemPoolSize
EtsysIeee8021CfmExtMemPoolMaxSize,
etsysIeee8021CfmExtMemPoolInUse
EtsysIeee8021CfmExtMemPoolMaxSize,
etsysIeee8021CfmExtMemPoolHighWaterMark
EtsysIeee8021CfmExtMemPoolMaxSize
}
etsysIeee8021CfmExtMemPoolIndex OBJECT-TYPE
SYNTAX EtsysIeee8021CfmExtMemPool
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to the Mem Pool Table."
::= { etsysIeee8021CfmExtMemPoolEntry 1 }
etsysIeee8021CfmExtMemPoolSize OBJECT-TYPE
SYNTAX EtsysIeee8021CfmExtMemPoolMaxSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of elements of the memory pool."
::= { etsysIeee8021CfmExtMemPoolEntry 2 }
etsysIeee8021CfmExtMemPoolInUse OBJECT-TYPE
SYNTAX EtsysIeee8021CfmExtMemPoolMaxSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of elements of the memory pool
in use."
::= { etsysIeee8021CfmExtMemPoolEntry 3 }
etsysIeee8021CfmExtMemPoolHighWaterMark OBJECT-TYPE
SYNTAX EtsysIeee8021CfmExtMemPoolMaxSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high water mark of memory pool usage."
::= { etsysIeee8021CfmExtMemPoolEntry 4 }
-- -------------------------------------------------------------
-- Enterasys CFM MEP Table
-- -------------------------------------------------------------
etsysIeee8021CfmExtMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysIeee8021CfmExtMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Extensions to the dot1agCfmMepTable."
::= { etsysIeee8021CfmExtMep 1 }
etsysIeee8021CfmExtMepEntry OBJECT-TYPE
SYNTAX EtsysIeee8021CfmExtMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Enterasys CFM MEP extension table entry."
AUGMENTS { dot1agCfmMepEntry }
::= { etsysIeee8021CfmExtMepTable 1 }
EtsysIeee8021CfmExtMepEntry ::=
SEQUENCE {
etsysIeee8021CfmExtMepLowPrDefSyslog
Dot1agCfmLowestAlarmPri,
etsysIeee8021CfmExtMepFngStateSyslog
Dot1agCfmFngState,
etsysIeee8021CfmExtMepHighestPrDefectSyslog
Dot1agCfmHighestDefectPri,
etsysIeee8021CfmExtMepDefectsSyslog
Dot1agCfmMepDefects,
etsysIeee8021CfmExtMepClearCcmDatabase
TruthValue,
etsysIeee8021CfmExtRxDiscardCount
Counter32,
etsysIeee8021CfmExtRxForwardCount
Counter32,
etsysIeee8021CfmExtRxErrorCount
Counter32,
etsysIeee8021CfmExtTxErrorCount
Counter32,
etsysIeee8021CfmExtMepRxCcmCount
Counter32,
etsysIeee8021CfmExtMepRxCcmErrCount
Counter32,
etsysIeee8021CfmExtMepRxCcmXconCount
Counter32,
etsysIeee8021CfmExtMepTxCcmCount
Counter32,
etsysIeee8021CfmExtMepTxCcmErrCount
Counter32,
etsysIeee8021CfmExtMepRxLbmCount
Counter32,
etsysIeee8021CfmExtMepTxLbmCount
Counter32,
etsysIeee8021CfmExtMepRxLbrCount
Counter32,
etsysIeee8021CfmExtMepTxLbrCount
Counter32,
etsysIeee8021CfmExtMepRxLtmCount
Counter32,
etsysIeee8021CfmExtMepTxLtmCount
Counter32,
etsysIeee8021CfmExtMepRxLtrCount
Counter32,
etsysIeee8021CfmExtMepTxLtrCount
Counter32,
etsysIeee8021CfmExtMepClearMepCounters
TruthValue
}
etsysIeee8021CfmExtMepLowPrDefSyslog OBJECT-TYPE
SYNTAX Dot1agCfmLowestAlarmPri
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An integer value specifying the lowest priority defect
that is allowed to generate syslog message."
DEFVAL { macRemErrXcon }
::= { etsysIeee8021CfmExtMepEntry 1 }
etsysIeee8021CfmExtMepFngStateSyslog OBJECT-TYPE
SYNTAX Dot1agCfmFngState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the MEP Fault Notification Generator
State Machine for Syslog.
"
::= { etsysIeee8021CfmExtMepEntry 2 }
etsysIeee8021CfmExtMepHighestPrDefectSyslog OBJECT-TYPE
SYNTAX Dot1agCfmHighestDefectPri
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine for Syslog
was last in the FNG_RESET state.
"
::= { etsysIeee8021CfmExtMepEntry 3 }
etsysIeee8021CfmExtMepDefectsSyslog OBJECT-TYPE
SYNTAX Dot1agCfmMepDefects
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A vector of Boolean error conditions maintained by the MEPs
Fault Notification Generator State Machine for Syslog from
Table 20-1, any of which may be true:
DefRDICCM(0)
DefMACstatus(1)
DefRemoteCCM(2)
DefErrorCCM(3)
DefXconCCM(4)
"
::= { etsysIeee8021CfmExtMepEntry 4 }
etsysIeee8021CfmExtMepClearCcmDatabase OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true, the MEP CCM database will be cleared."
::= { etsysIeee8021CfmExtMepEntry 5 }
etsysIeee8021CfmExtRxDiscardCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM frames received and discarded
since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 6 }
etsysIeee8021CfmExtRxForwardCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM frames received and forwarded
since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 7 }
etsysIeee8021CfmExtRxErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM frames received with errors
since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 8 }
etsysIeee8021CfmExtTxErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound CFM frames that could
not be transmitted because of errors since the last
reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 9 }
etsysIeee8021CfmExtMepRxCcmCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Continuity Check PDUs
received since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 10 }
etsysIeee8021CfmExtMepRxCcmErrCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Continuity Check PDUs
that triggered a Remote MEP Error received since
the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 11 }
etsysIeee8021CfmExtMepRxCcmXconCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Continuity Check PDUs
that triggered a MEP Cross Connect defect received
since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 12 }
etsysIeee8021CfmExtMepTxCcmCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Continuity Check PDUs
transmitted since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 13 }
etsysIeee8021CfmExtMepTxCcmErrCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound CFM Continuity Check
PDUs that could not be transmitted because of errors
since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 14 }
etsysIeee8021CfmExtMepRxLbmCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Loopback Message PDUs
received since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 15 }
etsysIeee8021CfmExtMepTxLbmCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Loopback Message PDUs
transmitted since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 16 }
etsysIeee8021CfmExtMepRxLbrCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Loopback Response PDUs
received since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 17 }
etsysIeee8021CfmExtMepTxLbrCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Loopback Response PDUs
transmitted since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 18 }
etsysIeee8021CfmExtMepRxLtmCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Linktrace Message PDUs
received since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 19 }
etsysIeee8021CfmExtMepTxLtmCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Linktrace Message PDUs
transmitted since last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 20 }
etsysIeee8021CfmExtMepRxLtrCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Linktrace Response PDUs
received since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 21 }
etsysIeee8021CfmExtMepTxLtrCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFM Linktrace Response PDUs
transmitted since the last reboot.
This value should not be maintained across reboot."
::= { etsysIeee8021CfmExtMepEntry 22 }
etsysIeee8021CfmExtMepClearMepCounters OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true, the CFM MEP counters will be cleared."
::= { etsysIeee8021CfmExtMepEntry 23 }
-- -------------------------------------------------------------
-- The MIP CCM Database Table
-- -------------------------------------------------------------
etsysIeee8021CfmMipCcmDbTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysIeee8021CfmMipCcmDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MIP CCM Database. A database, maintained by every
MEP and MHF, that maintains Continuity Check information
about other MEPs in the Maintenance Domain.
"
REFERENCE
"19.3"
::= { etsysIeee8021CfmExtGlobal 3 }
etsysIeee8021CfmMipCcmDbEntry OBJECT-TYPE
SYNTAX EtsysIeee8021CfmMipCcmDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MIP CCM Database table entry."
INDEX { dot1agCfmMdIndex,
dot1agCfmMaIndex,
etsysIeee8021CfmMipCcmDbMpIdentifier,
etsysIeee8021CfmMipCcmDbFid,
etsysIeee8021CfmMipCcmDbMacAddress
}
::= { etsysIeee8021CfmMipCcmDbTable 1 }
EtsysIeee8021CfmMipCcmDbEntry ::=
SEQUENCE {
etsysIeee8021CfmMipCcmDbMpIdentifier
Unsigned32,
etsysIeee8021CfmMipCcmDbFid
Unsigned32,
etsysIeee8021CfmMipCcmDbMacAddress
MacAddress,
etsysIeee8021CfmMipCcmDbMpIfIndex
InterfaceIndexOrZero,
etsysIeee8021CfmMipCcmDbMpMdLevel
Dot1agCfmMDLevel,
etsysIeee8021CfmMipCcmDbMpDirection
Dot1agCfmMpDirection,
etsysIeee8021CfmMipCcmDbLearnedIfIndex
InterfaceIndexOrZero,
etsysIeee8021CfmMipCcmDbTimeStamp
TimeStamp,
etsysIeee8021CfmMipCcmDbComponentId
IEEE8021PbbComponentIdentifier,
etsysIeee8021CfmMipCcmDbPrimarySelectorType
IEEE8021ServiceSelectorType,
etsysIeee8021CfmMipCcmDbPrimarySelector
IEEE8021ServiceSelectorValue
}
etsysIeee8021CfmMipCcmDbMpIdentifier OBJECT-TYPE
SYNTAX Unsigned32 (1..8191 | 16383..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifier of a MP whose information from the MIP
CCM Database is to be returned.
"
::= { etsysIeee8021CfmMipCcmDbEntry 1 }
etsysIeee8021CfmMipCcmDbFid OBJECT-TYPE
SYNTAX Unsigned32 ( 0..4094 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"FID of the item in the MIP CCM Database to be returned."
::= { etsysIeee8021CfmMipCcmDbEntry 2 }
etsysIeee8021CfmMipCcmDbMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the item in the MIP CCM Database to be
returned."
::= { etsysIeee8021CfmMipCcmDbEntry 3 }
etsysIeee8021CfmMipCcmDbMpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the interface of the MP of the
item in the MIP CCM Database to be returned."
::= { etsysIeee8021CfmMipCcmDbEntry 4 }
etsysIeee8021CfmMipCcmDbMpMdLevel OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD Level of the MP of the item in the MIP CCM
Database to be returned."
REFERENCE
"12.14.2.1.2:b"
::= { etsysIeee8021CfmMipCcmDbEntry 5 }
etsysIeee8021CfmMipCcmDbMpDirection OBJECT-TYPE
SYNTAX Dot1agCfmMpDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Direction in which the MP faces on the Bridge Port of
the item in the MIP CCM Database to be returned."
REFERENCE
"12.14.2.1.2:c"
::= { etsysIeee8021CfmMipCcmDbEntry 6 }
etsysIeee8021CfmMipCcmDbLearnedIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the interface on which the MIP CCM
of the MIP CCM database item was learned on."
::= { etsysIeee8021CfmMipCcmDbEntry 7 }
etsysIeee8021CfmMipCcmDbTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TimeStamp of the item in the MIP CCM Database to be returned.
It is the value of sysUpTime at the last time it was
modified."
::= { etsysIeee8021CfmMipCcmDbEntry 8 }
etsysIeee8021CfmMipCcmDbComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge component within the system to which the information
in this etsysIeee8021CfmMipCcmDbEntry applies. If the system is
not a Bridge, or if only one component is present in the Bridge,
then this variable (index) MUST be equal to 1.
"
REFERENCE
"12.3 l)"
::= { etsysIeee8021CfmMipCcmDbEntry 9 }
etsysIeee8021CfmMipCcmDbPrimarySelectorType OBJECT-TYPE
SYNTAX IEEE8021ServiceSelectorType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the Primary Service Selector identifier indicated by
etsysIeee8021CfmMipCcmDbPrimarySelector. See textual
convention IEEE8021ServiceSelectorType for details.
"
::= { etsysIeee8021CfmMipCcmDbEntry 10 }
etsysIeee8021CfmMipCcmDbPrimarySelector OBJECT-TYPE
SYNTAX IEEE8021ServiceSelectorValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary Service Selector identifier of a Service Instance. See
IEEE8021ServiceSelectorValue for details.
"
::= { etsysIeee8021CfmMipCcmDbEntry 11 }
etsysIeee8021CfmClearBridgeCcmDatabase OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true, the bridge CCM database will be cleared."
DEFVAL { false }
::= { etsysIeee8021CfmExtGlobal 4 }
-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------
etsysIeee8021CfmMibExtGroups OBJECT IDENTIFIER
::= { etsysIeee8021CfmMibExtConformance 1 }
etsysIeee8021CfmMibExtCompliances OBJECT IDENTIFIER
::= { etsysIeee8021CfmMibExtConformance 2 }
-- -------------------------------------------------------------
-- Units of conformance
-- -------------------------------------------------------------
etsysIeee8021CfmExtStatusGroup OBJECT-GROUP
OBJECTS {
etsysIeee8021CfmExtStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing global control of CFM
on the managed entity."
::= { etsysIeee8021CfmMibExtGroups 1 }
etsysIeee8021CfmExtMemPoolGroup OBJECT-GROUP
OBJECTS {
etsysIeee8021CfmExtMemPoolSize,
etsysIeee8021CfmExtMemPoolInUse,
etsysIeee8021CfmExtMemPoolHighWaterMark
}
STATUS current
DESCRIPTION
"A collection of objects providing information related to
the CFM-related memory pool of the managed entity."
::= { etsysIeee8021CfmMibExtGroups 2 }
etsysIeee8021CfmExtMepGroup OBJECT-GROUP
OBJECTS {
etsysIeee8021CfmExtMepLowPrDefSyslog,
etsysIeee8021CfmExtMepFngStateSyslog,
etsysIeee8021CfmExtMepHighestPrDefectSyslog,
etsysIeee8021CfmExtMepDefectsSyslog,
etsysIeee8021CfmExtMepClearCcmDatabase,
etsysIeee8021CfmExtRxDiscardCount,
etsysIeee8021CfmExtRxForwardCount,
etsysIeee8021CfmExtRxErrorCount,
etsysIeee8021CfmExtTxErrorCount,
etsysIeee8021CfmExtMepRxCcmCount,
etsysIeee8021CfmExtMepRxCcmErrCount,
etsysIeee8021CfmExtMepRxCcmXconCount,
etsysIeee8021CfmExtMepTxCcmCount,
etsysIeee8021CfmExtMepTxCcmErrCount,
etsysIeee8021CfmExtMepRxLbmCount,
etsysIeee8021CfmExtMepTxLbmCount,
etsysIeee8021CfmExtMepRxLbrCount,
etsysIeee8021CfmExtMepTxLbrCount,
etsysIeee8021CfmExtMepRxLtmCount,
etsysIeee8021CfmExtMepTxLtmCount,
etsysIeee8021CfmExtMepRxLtrCount,
etsysIeee8021CfmExtMepTxLtrCount,
etsysIeee8021CfmExtMepClearMepCounters
}
STATUS current
DESCRIPTION
"A collection of objects for the enterasys CFM
MEP group."
::= { etsysIeee8021CfmMibExtGroups 3 }
etsysIeee8021CfmExtMipGroup OBJECT-GROUP
OBJECTS {
etsysIeee8021CfmMipCcmDbMpIfIndex,
etsysIeee8021CfmMipCcmDbMpMdLevel,
etsysIeee8021CfmMipCcmDbMpDirection,
etsysIeee8021CfmMipCcmDbLearnedIfIndex,
etsysIeee8021CfmMipCcmDbTimeStamp,
etsysIeee8021CfmMipCcmDbComponentId,
etsysIeee8021CfmMipCcmDbPrimarySelectorType,
etsysIeee8021CfmMipCcmDbPrimarySelector
}
STATUS current
DESCRIPTION
"A collection of objects for the enterasys CFM
MIP group."
::= { etsysIeee8021CfmMibExtGroups 4 }
etsysIeee8021CfmClearBridgeCcmDatabaseGroup OBJECT-GROUP
OBJECTS {
etsysIeee8021CfmClearBridgeCcmDatabase
}
STATUS current
DESCRIPTION
"A collection of objects providing method to clear CFM
bridge CCM database."
::= { etsysIeee8021CfmMibExtGroups 5 }
-- -------------------------------------------------------------
-- Compliance statements
-- -------------------------------------------------------------
etsysIeee8021CfmMibExtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that support
etsysIeee8021CfmMibExtMIB."
MODULE
MANDATORY-GROUPS {
etsysIeee8021CfmExtStatusGroup,
etsysIeee8021CfmExtMemPoolGroup,
etsysIeee8021CfmExtMepGroup,
etsysIeee8021CfmExtMipGroup,
etsysIeee8021CfmClearBridgeCcmDatabaseGroup
}
::= { etsysIeee8021CfmMibExtCompliances 1 }
END