WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/ekinops/EKINOPS-PmPump3-MIB

2589 lines
70 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

-- *****************************************************************
-- EKINOPS-Pmpump3.TXT: MIB
--
--MIB Part Number:3MI00207ABAD
--MIB Version:01
--
-- Copyright (c) 2016 by Ekinops
-- All rights reserved.
--
-- *****************************************************************
EKINOPS-PmPump3-MIB DEFINITIONS ::= BEGIN
IMPORTS
ekinops,
EkiState,
EkiOnOff,
EkiMode,
EkiProtocol,
EkiApiState,
EkiSynchroMode,
EkiMeasureType
FROM EKINOPS-MIB
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Integer32,
Counter32,
IpAddress
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString
FROM SNMPv2-TC;
modulepmpump3 MODULE-IDENTITY
LAST-UPDATED "201605230000Z"
ORGANIZATION "Ekinops"
CONTACT-INFO
"Ekinops
3, rue Blaise Pascal
F-22300 Lannion / FRANCE
Tel : +33 (0)2 96 05 00 30
Fax : +33 (0)2 96 48 62 39
E-mail: support@ekinops.net"
DESCRIPTION
"Creation"
REVISION "201009010000Z"
DESCRIPTION
"Creation"
REVISION "201012150000Z"
DESCRIPTION
"Add inventory of the lasers"
REVISION "201109200000Z"
DESCRIPTION
"OOS insertion"
REVISION "201207040000Z"
DESCRIPTION
"Minor cosmetic updates"
REVISION "201403260000Z"
DESCRIPTION
"Probcause,AlarmType - NMS completion"
REVISION "201411250000Z"
DESCRIPTION
"Labels cosmetic updates"
REVISION "201605230000Z"
DESCRIPTION
"New AlarmType – synthesisAlarm (12)"
::= { ekinops 49 }
--- *****************************************************
--- LEAF LEVEL 2
--- *****************************************************
pmpump3alarms OBJECT IDENTIFIER ::= { modulepmpump3 2 }
pmpump3AlmOther OBJECT IDENTIFIER ::= { pmpump3alarms 1 }
pmpump3AlmOtherNurg OBJECT IDENTIFIER ::= { pmpump3AlmOther 1 }
pmpump3AlmOtherUrg OBJECT IDENTIFIER ::= { pmpump3AlmOther 2 }
pmpump3AlmOtherCrit OBJECT IDENTIFIER ::= { pmpump3AlmOther 3 }
pmpump3AlmClient OBJECT IDENTIFIER ::= { pmpump3alarms 2 }
pmpump3AlmClientNurg OBJECT IDENTIFIER ::= { pmpump3AlmClient 1 }
pmpump3AlmClientUrg OBJECT IDENTIFIER ::= { pmpump3AlmClient 2 }
pmpump3AlmClientCrit OBJECT IDENTIFIER ::= { pmpump3AlmClient 3 }
pmpump3AlmLine OBJECT IDENTIFIER ::= { pmpump3alarms 3 }
pmpump3AlmLineNurg OBJECT IDENTIFIER ::= { pmpump3AlmLine 1 }
pmpump3AlmLineUrg OBJECT IDENTIFIER ::= { pmpump3AlmLine 2 }
pmpump3AlmLineCrit OBJECT IDENTIFIER ::= { pmpump3AlmLine 3 }
pmpump3measures OBJECT IDENTIFIER ::= { modulepmpump3 3 }
pmpump3MesrOther OBJECT IDENTIFIER ::= { pmpump3measures 1 }
pmpump3MesrClient OBJECT IDENTIFIER ::= { pmpump3measures 2 }
pmpump3MesrLine OBJECT IDENTIFIER ::= { pmpump3measures 3 }
pmpump3controlsWrite OBJECT IDENTIFIER ::= { modulepmpump3 6 }
pmpump3CtrlOther OBJECT IDENTIFIER ::= { pmpump3controlsWrite 1 }
pmpump3CtrlClient OBJECT IDENTIFIER ::= { pmpump3controlsWrite 2 }
pmpump3CtrlLine OBJECT IDENTIFIER ::= { pmpump3controlsWrite 3 }
pmpump3ri OBJECT IDENTIFIER ::= { modulepmpump3 7 }
pmpump3riTable OBJECT IDENTIFIER ::= { pmpump3ri 1 }
pmpump3Config OBJECT IDENTIFIER ::= { modulepmpump3 9 }
pmpump3traps OBJECT IDENTIFIER ::= { modulepmpump3 10 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- TEXTUAL-CONVENTION
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- REMOTE INVENTORY
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
pmpump3RinvReloadInventory OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reload the inventory: This OID triggers an
inventory reload."
::= { pmpump3ri 2 }
pmpump3RinvHwPlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"HW platform description: This OID contains the
description of the Hardware platform."
::= { pmpump3ri 3 }
pmpump3RinvModulePlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module platform description: This OID contains the
description of the Module."
::= { pmpump3ri 4 }
pmpump3RinvSwPlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SW platform description: This OID contains the
description of the Software platform."
::= { pmpump3ri 5 }
pmpump3RinvLaser1Table OBJECT-TYPE
SYNTAX SEQUENCE OF Pmpump3RinvLaser1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of the lasers on the selected module"
::= { pmpump3riTable 1 }
pmpump3RinvLaser1Entry OBJECT-TYPE
SYNTAX Pmpump3RinvLaser1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row definition for the laser table"
INDEX { pmpump3RinvLaser1Index }
::= { pmpump3RinvLaser1Table 1 }
Pmpump3RinvLaser1Entry::=
SEQUENCE {
pmpump3RinvLaser1Index
Integer32,
pmpump3RinvLaser1
DisplayString
}
pmpump3RinvLaser1Index OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for laser table"
::= { pmpump3RinvLaser1Entry 1 }
pmpump3RinvLaser1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inventory for the laser: This OID contains the inventory for the laser"
::= { pmpump3RinvLaser1Entry 2 }
pmpump3RinvLaser2Table OBJECT-TYPE
SYNTAX SEQUENCE OF Pmpump3RinvLaser2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of the lasers on the selected module"
::= { pmpump3riTable 2 }
pmpump3RinvLaser2Entry OBJECT-TYPE
SYNTAX Pmpump3RinvLaser2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row definition for the laser table"
INDEX { pmpump3RinvLaser2Index }
::= { pmpump3RinvLaser2Table 1 }
Pmpump3RinvLaser2Entry::=
SEQUENCE {
pmpump3RinvLaser2Index
Integer32,
pmpump3RinvLaser2
DisplayString
}
pmpump3RinvLaser2Index OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for laser table"
::= { pmpump3RinvLaser2Entry 1 }
pmpump3RinvLaser2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inventory for the laser: This OID contains the inventory for the laser"
::= { pmpump3RinvLaser2Entry 2 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- ALARMS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the synthAlm0 article
--- *****************************************************
pmpump3AlmsynthAlm0 OBJECT IDENTIFIER ::= { pmpump3AlmOtherCrit 0 }
pmpump3AlmDefFuseB OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fuse B Fail :This OID indicates
that the fuse of the power input
B is in fail condition <Help>
Status of the Fuse B <Condtype>
DEF_FUSE_B <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3AlmsynthAlm0 16 }
pmpump3AlmDefFuseA OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fuse A Fail :This OID indicates
that the fuse of the power input
A is in fail condition <Help>
Status of the Fuse A <Condtype>
DEF_FUSE_A <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3AlmsynthAlm0 15 }
pmpump3AlmModGlobFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Failure :This OID is set
on detection of a failure originating
from the PM <Condtype> MOD_GLOB_FAIL
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmpump3AlmsynthAlm0 9 }
--- *****************************************************
--- LEAF for the synthAlm2 article
--- *****************************************************
pmpump3AlmsynthAlm2 OBJECT IDENTIFIER ::= { pmpump3AlmOtherNurg 2 }
pmpump3AlmConfTableLoad OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM Configuration Load :This OID
is at 1 during the loading of
configuration tables in the modules
RAM. <Condtype> CONF_TABLE_LOAD
<Probcause> other (1) <Alarmtype>
other (1) <Polarity> (2)
"
::= { pmpump3AlmsynthAlm2 3 }
pmpump3AlmInvUpload OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Inventory Upload :This OID is
at 1 during the uploading of PM
inventory information. <Condtype>
INV_UPLOAD <Probcause> other (1)
<Alarmtype> other (1) <Polarity>
(2)
"
::= { pmpump3AlmsynthAlm2 2 }
pmpump3AlmConfTableSave OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM Configuration Save :This OID
is at 1 during the saving of a
new configuration table in the
module Flash memory. <Condtype>
CONF_TABLE_SAVE <Probcause> other
(1) <Alarmtype> other (1) <Polarity>
(2)
"
::= { pmpump3AlmsynthAlm2 1 }
--- *****************************************************
--- LEAF for the synthAlmLaser1 article
--- *****************************************************
pmpump3AlmsynthAlmLaser1 OBJECT IDENTIFIER ::= { pmpump3AlmClientCrit 8 }
pmpump3AlmLaser1Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pump Failure :This
OID indicates a failure on the
pump <Condtype> LASER1_FAIL <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
"
::= { pmpump3AlmsynthAlmLaser1 12 }
pmpump3AlmLaser1Alm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Alarm On Booster / IL1 Pump DDM
:This OID indicates an alarm is
present coming out of the IL1 pump
DDM <Condtype> LASER1_ALM <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
"
::= { pmpump3AlmsynthAlmLaser1 10 }
pmpump3AlmLaser1Warning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Warning On Booster / IL1 Pump
DDM :This OID indicates a warning
is present coming out of IL1 pump
DDM <Condtype> LASER1_WARNING <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
"
::= { pmpump3AlmsynthAlmLaser1 9 }
pmpump3AlmLaser1Oos OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pump In Service
:This OID indicates that the IL1
pump is In Service (1) of Out or
Service (2) <Help> This status
indicates if the IL1 pump is in
service <Condtype> LASER1_OOS <Probcause>
other (1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { pmpump3AlmsynthAlmLaser1 6 }
pmpump3AlmLaser1TxOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pump Output Shutdown
:This OID indicates the IL1 pump
optical output power is on. <Help>
This status indicates if the IL1
laser pump is ON or OFF <Condtype>
LASER1_TX_OFF <Probcause> other
(1) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3AlmsynthAlmLaser1 5 }
pmpump3AlmLaser1HwFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pump HW Failure
:This OID indicates a failure
on IL1 pump, most probably caused
by a HW issue <Condtype> LASER1_HW_FAIL
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmpump3AlmsynthAlmLaser1 4 }
pmpump3AlmLaser1InitNotCompl OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pump Not Ready :This
OID indicates that the IL1 pump
is not operational. <Condtype>
LASER1_INIT_NOT_COMPL <Probcause>
other (1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { pmpump3AlmsynthAlmLaser1 2 }
--- *****************************************************
--- LEAF for the synthAlmLaser2 article
--- *****************************************************
pmpump3AlmsynthAlmLaser2 OBJECT IDENTIFIER ::= { pmpump3AlmClientCrit 9 }
pmpump3AlmLaser2Fail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pump Failure :This
OID indicates a failure on the
pump <Condtype> LASER2_FAIL <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
"
::= { pmpump3AlmsynthAlmLaser2 12 }
pmpump3AlmLaser2Alm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Alarm On Pre-Amp / IL2 Pump DDM
:This OID indicates an alarm is
present coming out of IL2 pump
DDM <Condtype> LASER2_ALM <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
"
::= { pmpump3AlmsynthAlmLaser2 10 }
pmpump3AlmLaser2Warning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Warning On Pre-Amp / IL2 Pump
DDM :This OID indicates a warning
is present coming out of the IL2
pump DDM <Condtype> LASER2_WARNING
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmpump3AlmsynthAlmLaser2 9 }
pmpump3AlmLaser2Oos OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pump In Service
:This OID indicates that the IL2
pump is In Service (1) of Out or
Service (2) <Help> This status
indicates if the IL2 pump is in
service <Condtype> LASER2_OOS <Probcause>
other (1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { pmpump3AlmsynthAlmLaser2 6 }
pmpump3AlmLaser2TxOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pump Output Shutdown
:This OID indicates the IL2 pump
optical output power is on. <Help>
This status indicates if the IL2
laser pump is ON or OFF <Condtype>
LASER2_TX_OFF <Probcause> other
(1) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3AlmsynthAlmLaser2 5 }
pmpump3AlmLaser2HwFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pump HW Failure
:This OID indicates a failure
on IL2 pump, most probably caused
by a HW issue <Condtype> LASER2_HW_FAIL
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmpump3AlmsynthAlmLaser2 4 }
pmpump3AlmLaser2InitNotCompl OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pump Not Ready :This
OID indicates that the IL2 pump
is not operational. <Condtype>
LASER2_INIT_NOT_COMPL <Probcause>
other (1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { pmpump3AlmsynthAlmLaser2 2 }
--- *****************************************************
--- LEAF for the laser1Alarms1 article
--- *****************************************************
pmpump3Almlaser1Alarms1 OBJECT IDENTIFIER ::= { pmpump3AlmClientUrg 16 }
pmpump3AlmLaser1BiasHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Bias High Alarm
:This OID indicates that the Bias
is higher than the alarm threshold
of the IL1 pump. <Help> This
alarm indicates if the IL2 bias
is too high <Condtype> LASER1_BIAS_HIGH_ALARM
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser1Alarms1 8 }
pmpump3AlmLaser1BiasLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Bias Low Alarm :This
OID indicates that the Bias is
lower than the alarm threshold
of the IL1 pump. <Help> This
alarm indicates if the IL2 bias
is too low <Condtype> LASER1_BIAS_LOW_ALARM
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser1Alarms1 7 }
pmpump3AlmLaser1OutputPwrHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pwr High Alarm :This
OID indicates that the Transmit
Power is higher than the alarm
threshold of the IL1 pump. <Help>
This alarm indicates if the IL1
power is too high <Condtype> LASER1_OUTPUT_PWR_HIGH_ALARM
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser1Alarms1 6 }
pmpump3AlmLaser1OutputPwrLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pwr Low Alarm :This
OID indicates that the Transmit
Power is lower than the alarm threshold
of the IL1 pump. <Help> This
alarm indicates if the IL1 power
is too low <Condtype> LASER1_OUTPUT_PWR_LOW_ALARM
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser1Alarms1 5 }
pmpump3AlmLaser1VthHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Vth High Alarm :This
OID indicates that the thermistor
voltage is higher than the alarm
threshold of the IL1 pump. <Help>
This alarm indicates if the IL1
power is too high <Condtype> LASER1_VTH_HIGH_ALARM
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmpump3Almlaser1Alarms1 4 }
pmpump3AlmLaser1VthLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Vth Low Alarm :This
OID indicates that the thermistor
voltage is lower than the alarm
threshold of the IL1 pump. <Help>
This alarm indicates if the IL1
power is too low <Condtype> LASER1_VTH_LOW_ALARM
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmpump3Almlaser1Alarms1 3 }
pmpump3AlmLaser1TempHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Temp High Alarm
:This OID indicates that the pump
temperature is higher than the
alarm threshold of the IL1 pump.
<Help> This alarm indicates if
the IL1 pump temperature is too
high <Condtype> LASER1_TEMP_HIGH_ALARM
<Probcause> performanceDegraded
(35) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser1Alarms1 2 }
pmpump3AlmLaser1TempLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Temp Low Alarm :This
OID indicates that the pump temperature
is lower than the alarm threshold
of the IL1 pump. <Help> This
alarm indicates if the IL1 pump
temperature is too low <Condtype>
LASER1_TEMP_LOW_ALARM <Probcause>
performanceDegraded (35) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser1Alarms1 1 }
--- *****************************************************
--- LEAF for the laser1Warnings article
--- *****************************************************
pmpump3Almlaser1Warnings OBJECT IDENTIFIER ::= { pmpump3AlmClientNurg 17 }
pmpump3AlmLaser1BiasHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Bias High Warning
:This OID indicates that the Bias
is higher than the warning threshold
of the IL1 pump. <Help> This
warning indicates if the IL1 bias
is too high <Condtype> LASER1_BIAS_HIGH_WARNING
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser1Warnings 8 }
pmpump3AlmLaser1BiasLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Bias Low Warning
:This OID indicates that the Bias
is lower than the warning threshold
of the IL1 pump. <Help> This
warning indicates if the IL1 bias
is too low <Condtype> LASER1_BIAS_LOW_WARNING
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser1Warnings 7 }
pmpump3AlmLaser1OutputPwrHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pwr High Warning
:This OID indicates that the Transmit
Power is higher than the warning
threshold of the IL1 pump. <Help>
This warning indicates if the
IL1 power is too high <Condtype>
LASER1_OUTPUT_PWR_HIGH_WARNING
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser1Warnings 6 }
pmpump3AlmLaser1OutputPwrLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pwr Low Warning
:This OID indicates that the Transmit
Power is lower than the warning
threshold of the IL1 pump. <Help>
This warning indicates if the
IL1 power is too low <Condtype>
LASER1_OUTPUT_PWR_LOW_WARNING <Probcause>
transmitterFailure (56) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser1Warnings 5 }
pmpump3AlmLaser1VthHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Vth High Warning
:This OID indicates that the thermistor
voltage is higher than the warning
threshold of the IL1 pump. <Help>
This warning indicates if the
IL1 power is too high <Condtype>
LASER1_VTH_HIGH_WARNING <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser1Warnings 4 }
pmpump3AlmLaser1VthLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Vth Low Warning
:This OID indicates that the thermistor
voltage is lower than the warning
threshold of the IL1 pump. <Help>
This warning indicates if the
IL1 power is too low <Condtype>
LASER1_VTH_LOW_WARNING <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser1Warnings 3 }
pmpump3AlmLaser1TempHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Temp High Warning
:This OID indicates that the pump
temperature is higher than the
warning threshold of the IL1 pump.
<Help> This warning indicates
if the IL1 pump temperature is
too high <Condtype> LASER1_TEMP_HIGH_WARNING
<Probcause> performanceDegraded
(35) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser1Warnings 2 }
pmpump3AlmLaser1TempLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Temp Low Warning
:This OID indicates that the pump
temperature is lower than the
warning threshold of the IL1 pump.
<Help> This warning indicates
if the IL1 pump temperature is
too low <Condtype> LASER1_TEMP_LOW_WARNING
<Probcause> performanceDegraded
(35) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser1Warnings 1 }
--- *****************************************************
--- LEAF for the laser1Alarms2 article
--- *****************************************************
pmpump3Almlaser1Alarms2 OBJECT IDENTIFIER ::= { pmpump3AlmClientCrit 19 }
pmpump3AlmLaser1ExtLsd OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Laser Shutdown :This
OID indicates that the laser of
the pump is shut down <Help>
This status indicates that the
laser of the pump is shut down
<Condtype> LASER1_EXT_LSD <Probcause>
other (1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { pmpump3Almlaser1Alarms2 6 }
pmpump3AlmLaser1OaDisconnectedLsd OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pump Link Disconnected
:This OID indicates that the link
betwenn the amplifier and the pump
is open <Help> This alarm indicates
that the OA or the fiber is not
present <Condtype> LASER1_OA_DISCONNECTED_LSD
<Probcause> other (1) <Alarmtype>
other (1) <Polarity> (2)
"
::= { pmpump3Almlaser1Alarms2 5 }
pmpump3AlmLaser1AlmTecDev OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 TEC Deviation :This
OID indicates that the loop control
of the TEC is in fail condition
<Help> This alarm indicates if
the loop control of the TEC is
in fail condition <Condtype> LASER1_ALM_TEC_DEV
<Probcause> receiveFailure (41)
<Alarmtype> physicalViolation (9)
<Polarity> (2)
"
::= { pmpump3Almlaser1Alarms2 4 }
pmpump3AlmLaser1AlmTecPower OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 TEC Pw :This OID
indicates that the TEC power supply
is in fail condition . <Help>
This alarm indicates if the TEC
power is in fail condition <Condtype>
LASER1_ALM_TEC_POWER <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser1Alarms2 3 }
pmpump3AlmLaser1AlmTemp OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Temperature Alarm
:This OID indicates that the temperature
of the current driver has reached
the internal limitation. <Help>
This alarm indicates if the temperature
has reached its limitation <Condtype>
LASER1_ALM_TEMP <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser1Alarms2 2 }
pmpump3AlmLaser1AlmCurrent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Current Alarm :This
OID indicates that maximum current
has reached the internal limitation
<Help> This alarm indicates if
the current has reached its limitation
<Condtype> LASER1_ALM_CURRENT
<Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser1Alarms2 1 }
--- *****************************************************
--- LEAF for the laser2Alarms1 article
--- *****************************************************
pmpump3Almlaser2Alarms1 OBJECT IDENTIFIER ::= { pmpump3AlmLineUrg 24 }
pmpump3AlmLaser2BiasHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Bias High Alarm
:This OID indicates that the Bias
is higher than the alarm threshold
of the IL1 Optical Module <Help>
This alarm indicates if the IL2
bias is too high <Condtype> LASER2_BIAS_HIGH_ALARM
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms1 8 }
pmpump3AlmLaser2BiasLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Bias Low Alarm :This
OID indicates that the Bias is
lower than the alarm threshold
of the IL1 Optical Module <Help>
This alarm indicates if the IL2
bias is too low <Condtype> LASER2_BIAS_LOW_ALARM
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms1 7 }
pmpump3AlmLaser2OutputPwrHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pwr High Alarm :This
OID indicates that the Transmit
Power is higher than the alarm
threshold of the IL1 Optical Module
<Help> This alarm indicates if
the IL2 power is too high <Condtype>
LASER2_OUTPUT_PWR_HIGH_ALARM <Probcause>
transmitterFailure (56) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms1 6 }
pmpump3AlmLaser2OutputPwrLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pwr Low Alarm :This
OID indicates that the Transmit
Power is lower than the alarm threshold
of the IL1 Optical Module <Help>
This alarm indicates if the IL2
power is too low <Condtype> LASER2_OUTPUT_PWR_LOW_ALARM
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms1 5 }
pmpump3AlmLaser2VthHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Vth High Alarm :This
OID indicates that the Receive
Power is higher than the alarm
threshold of the IL2 Optical Module
<Help> This alarm indicates if
the IL2 power is too high <Condtype>
LASER2_VTH_HIGH_ALARM <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms1 4 }
pmpump3AlmLaser2VthLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Vth Low Alarm :This
OID indicates that the Receive
Power is lower than the alarm
threshold of the IL2 Optical Module
<Help> This alarm indicates if
the IL2 power is too low <Condtype>
LASER2_VTH_LOW_ALARM <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms1 3 }
pmpump3AlmLaser2TempHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Temp High Alarm
:This OID indicates that the Gain
is higher than the alarm threshold
of the IL1 Module <Help> This
alarm indicates if the IL2 pump
temperature is too high <Condtype>
LASER2_TEMP_HIGH_ALARM <Probcause>
performanceDegraded (35) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms1 2 }
pmpump3AlmLaser2TempLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Temp Low Alarm :This
OID indicates that the Gain is
lower than the alarm threshold
of the IL1 Module <Help> This
alarm indicates if the IL2 pump
temperature is too low <Condtype>
LASER2_TEMP_LOW_ALARM <Probcause>
performanceDegraded (35) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms1 1 }
--- *****************************************************
--- LEAF for the laser2Warnings article
--- *****************************************************
pmpump3Almlaser2Warnings OBJECT IDENTIFIER ::= { pmpump3AlmLineNurg 25 }
pmpump3AlmLaser2BiasHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Bias High Warning
:This OID indicates that the Bias
is higher than the Warning threshold
of the IL1 Optical Module <Help>
This warning indicates if the
IL2 bias is too high <Condtype>
LASER2_BIAS_HIGH_WARNING <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser2Warnings 8 }
pmpump3AlmLaser2BiasLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Bias Low Warning
:This OID indicates that the Bias
is lower than the Warning threshold
of the IL1 Optical Module <Help>
This warning indicates if the
IL2 bias is too low <Condtype>
LASER2_BIAS_LOW_WARNING <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser2Warnings 7 }
pmpump3AlmLaser2OutputPwrHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pwr High Warning
:This OID indicates that the Transmit
Power is higher than the Warning
threshold of the IL1 Optical Module
<Help> This warning indicates
if the IL2 power is too high <Condtype>
LASER2_OUTPUT_PWR_HIGH_WARNING
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser2Warnings 6 }
pmpump3AlmLaser2OutputPwrLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pwr Low Warning
:This OID indicates that the Transmit
Power is lower than the Warning
threshold of the IL1 Optical Module
<Help> This warning indicates
if the IL2 power is too low <Condtype>
LASER2_OUTPUT_PWR_LOW_WARNING <Probcause>
transmitterFailure (56) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Warnings 5 }
pmpump3AlmLaser2VthHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Vth High Warning
:This OID indicates that the Receive
Power is higher than the Warning
threshold of the IL2 Optical Module
<Help> This warning indicates
if the IL2 power is too high <Condtype>
LASER2_VTH_HIGH_WARNING <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Warnings 4 }
pmpump3AlmLaser2VthLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Vth Low Warning
:This OID indicates that the Receive
Power is lower than the Warning
threshold of the IL2 Optical Module
<Help> This warning indicates
if the IL2 power is too low <Condtype>
LASER2_VTH_LOW_WARNING <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Warnings 3 }
pmpump3AlmLaser2TempHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Temp High Warning
:This OID indicates that the Gain
is higher than the Warning threshold
of the IL1 Module <Help> This
warning indicates if the IL2 pump
temperature is too high <Condtype>
LASER2_TEMP_HIGH_WARNING <Probcause>
performanceDegraded (35) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Warnings 2 }
pmpump3AlmLaser2TempLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Temp Low Warning
:This OID indicates that the Gain
is lower than the Warning threshold
of the IL1 Module <Help> This
warning indicates if the IL2 pump
temperature is too low <Condtype>
LASER2_TEMP_LOW_WARNING <Probcause>
performanceDegraded (35) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3Almlaser2Warnings 1 }
--- *****************************************************
--- LEAF for the laser2Alarms2 article
--- *****************************************************
pmpump3Almlaser2Alarms2 OBJECT IDENTIFIER ::= { pmpump3AlmLineCrit 27 }
pmpump3AlmLaser2ExtLsd OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Laser Shutdown :This
OID indicates that the laser of
the pump is shut down <Help>
This status indicates that the
laser of the pump is shut down
<Condtype> LASER2_EXT_LSD <Probcause>
other (1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { pmpump3Almlaser2Alarms2 6 }
pmpump3AlmLaser2OaDisconnectedLsd OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pump Link Disconnected
:This OID indicates that the link
betwenn the amplifier and the pump
is open <Help> This alarm indicates
that the OA or the fiber is not
present <Condtype> LASER2_OA_DISCONNECTED_LSD
<Probcause> other (1) <Alarmtype>
other (1) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms2 5 }
pmpump3AlmLaser2AlmTecDev OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 TEC Deviation :This
OID indicates that the loop control
of the TEC is in fail condition
<Help> This alarm indicates if
the loop control of the TEC is
in fail condition <Condtype> LASER2_ALM_TEC_DEV
<Probcause> receiveFailure (41)
<Alarmtype> physicalViolation (9)
<Polarity> (2)
"
::= { pmpump3Almlaser2Alarms2 4 }
pmpump3AlmLaser2AlmTecPower OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 TEC Pw :This OID
indicates that the TEC power supply
is in fail condition . <Help>
This alarm indicates if the TEC
power is in fail condition <Condtype>
LASER2_ALM_TEC_POWER <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms2 3 }
pmpump3AlmLaser2AlmTemp OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Temperature Alarm
:This OID indicates that the temperature
of the current driver has reached
the internal limitation. <Help>
This alarm indicates if the temperature
has reached its limitation <Condtype>
LASER2_ALM_TEMP <Probcause> pumpFailure
(39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms2 2 }
pmpump3AlmLaser2AlmCurrent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Current Alarm :This
OID indicates that maximum current
has reached the internal limitation
<Help> This alarm indicates if
the current has reached its limitation
<Condtype> LASER2_ALM_CURRENT
<Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3Almlaser2Alarms2 1 }
--- *****************************************************
--- LEAF for the pmAlarms article
--- *****************************************************
pmpump3AlmpmAlarms OBJECT IDENTIFIER ::= { pmpump3AlmOtherUrg 74 }
pmpump3AlmTempHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Temperature High Alarm
:This OID indicates that the PM
temperature is higher than the
alarm threshold <Help> This
alarm indicates if the module
temperature is too high <Condtype>
TEMP_HIGH_ALARM <Probcause> temperatureUnacceptable
(51) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3AlmpmAlarms 2 }
pmpump3AlmTermpLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Temperature Low Alarm :This
OID indicates that the PM temperature
if lower than the alarm threshold
<Help> This alarm indicates if
the module temperature is too low
<Condtype> TERMP_LOW_ALARM <Probcause>
temperatureUnacceptable (51) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmpump3AlmpmAlarms 1 }
--- *****************************************************
--- LEAF for the pmWarnings article
--- *****************************************************
pmpump3AlmpmWarnings OBJECT IDENTIFIER ::= { pmpump3AlmOtherNurg 75 }
pmpump3AlmTempHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Temperature High Warning
:This OID indicates that the PM
temperature if higher than the
Warning threshold <Help> This
warning indicates if the module
temperature is too high <Condtype>
TEMP_HIGH_WARNING <Probcause> temperatureUnacceptable
(51) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3AlmpmWarnings 2 }
pmpump3AlmTermpLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Temperature Low Warning
:This OID indicates that the PM
temperature if lower than the Warning
threshold <Help> This warning
indicates if the module temperature
is too low <Condtype> TERMP_LOW_WARNING
<Probcause> temperatureUnacceptable
(51) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmpump3AlmpmWarnings 1 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- CONTROLS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the synth0 article
--- *****************************************************
pmpump3Ctrlsynth0 OBJECT IDENTIFIER ::= { pmpump3CtrlOther 0 }
pmpump3CtrlConfClear OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Clear Configuration Tables :This
bit clears the configuration tables
from configuration in the flash.
<Help> This control restores
the default configuration of the
module
"
::= { pmpump3Ctrlsynth0 13 }
pmpump3CtrlConfFlash OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Write Configuration Tables :This
bit saves the current configuration
of the module as configuration
in the flash. <Help> This control
saves the customer configuration
on the module
"
::= { pmpump3Ctrlsynth0 9 }
pmpump3CtrlConfLoad OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Load Configuration Tables :When
set this enables loading from flash
configuration1 into the module.
"
::= { pmpump3Ctrlsynth0 1 }
--- *****************************************************
--- LEAF for the swMgnt article
--- *****************************************************
pmpump3CtrlswMgnt OBJECT IDENTIFIER ::= { pmpump3CtrlOther 5 }
pmpump3CtrlWarmReset OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
PM Warm Reset :This OID, when
set, causes a warm reset of the
Software. This reset is not traffic
affecting, and the configuration
of the Sofwtare remains unchanged.
<Help> This control initiates
a warm reset of the module.
"
::= { pmpump3CtrlswMgnt 3 }
pmpump3CtrlColdReset OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
PM Cold Reset :This OID, when
set, causes a cold reset of the
Software. This reset is traffic
affecting, and the configuration
of Software is reloaded on start-up.
<Help> This control initiates
a cold reset of the module.
"
::= { pmpump3CtrlswMgnt 2 }
--- *****************************************************
--- LEAF for the laser1LaserOff article
--- *****************************************************
pmpump3Ctrllaser1LaserOff OBJECT IDENTIFIER ::= { pmpump3CtrlClient 32 }
pmpump3CtrlLaser1LaserOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Booster / IL1 Pump Laser Off :This
OID switches OFF the laser of the
IL1 pump. <Help> This control
defines the laser state of the
IL1
"
::= { pmpump3Ctrllaser1LaserOff 1 }
--- *****************************************************
--- LEAF for the laser1EffPwrOutSettingValue article
--- *****************************************************
pmpump3Ctrllaser1EffPwrOutSettingValue OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Booster / IL1 Effective Output
Power :This OID sets the value
of the effective output power
of the IL1 pump (Unit = dBm)
<Help> This control defines
the IL1 effective output power
in dBm.
"
::= { pmpump3CtrlClient 37 }
--- *****************************************************
--- LEAF for the laser2LaserOff article
--- *****************************************************
pmpump3Ctrllaser2LaserOff OBJECT IDENTIFIER ::= { pmpump3CtrlLine 40 }
pmpump3CtrlLaser2LaserOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Preampli / IL2 Pump Laser Off
:This OID switches OFF the laser
of the IL2 pump. <Help> This
control defines the laser state
of the IL2
"
::= { pmpump3Ctrllaser2LaserOff 1 }
--- *****************************************************
--- LEAF for the laser2EffPwrOutSettingValue article
--- *****************************************************
pmpump3Ctrllaser2EffPwrOutSettingValue OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Preampli / IL2 Effective Output
Power :This OID sets the value
of the effective output power
of the IL2 pump (Unit = dBm)
<Help> This control defines
the IL2 effective output power
in dBm.
"
::= { pmpump3CtrlLine 45 }
--- *****************************************************
--- LEAF for the ledTest article
--- *****************************************************
pmpump3CtrlledTest OBJECT IDENTIFIER ::= { pmpump3CtrlOther 73 }
pmpump3CtrlLedOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Leds Off :This OID switches off
all the Leds as a test feature.
<Help> This control initiates
a test leds turning all the LEDs
to OFF
"
::= { pmpump3CtrlledTest 3 }
pmpump3CtrlRedLed OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Red Leds Test :This OID switches
on all the red Leds as a test feature.
<Help> This control initiates
a test leds turning all the LEDs
to red
"
::= { pmpump3CtrlledTest 2 }
pmpump3CtrlGreenLed OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Green Leds Test :This OID switches
on all the green Leds as a test
feature. <Help> This control
initiates a test leds turning
all the LEDs to green
"
::= { pmpump3CtrlledTest 1 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- MEASURES
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the laser1BiasMeas article
--- *****************************************************
pmpump3Mesrlaser1BiasMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pump Laser Bias
:This OID gives the pump laser
current of the IL1 laser (Bias
= AV/20) (Unit = mA) <Help>
This measure gives the bias of
the IL1 pump laser
"
::= { pmpump3MesrClient 16 }
--- *****************************************************
--- LEAF for the laser1VthMeas article
--- *****************************************************
pmpump3Mesrlaser1VthMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pump Temp. Reg.
Volt :This OID gives the Voltage
of the Temperature Regulator of
the IL1 laser (Voltage = AV/10000)
(Unit = V) <Help> This measure
gives the Voltage of the Temperature
Regulator of the IL1 pump laser
"
::= { pmpump3MesrClient 17 }
--- *****************************************************
--- LEAF for the laser2BiasMeas article
--- *****************************************************
pmpump3Mesrlaser2BiasMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pump Laser Bias
:This OID gives the pump laser
current of the IL2 laser (Bias
= AV/20) (Unit = mA) <Help>
This measure gives the bias of
the IL2 pump laser
"
::= { pmpump3MesrLine 24 }
--- *****************************************************
--- LEAF for the laser2VthMeas article
--- *****************************************************
pmpump3Mesrlaser2VthMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pump Temp. Reg.
Volt :This OID gives the Voltage
of the Temperature Regulator of
the IL2 laser (Voltage = AV/10000)
(Unit = V) <Help> This measure
gives the Voltage of the Temperature
Regulator of the IL2 pump laser
"
::= { pmpump3MesrLine 25 }
--- *****************************************************
--- LEAF for the laser1Pwr article
--- *****************************************************
pmpump3Mesrlaser1Pwr OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pump Power :This
OID gives the power value provided
by the external pump to the IL1
(Power = AV/20) (Unit = mW) <Help>
This measure gives the power
provided by the pump to the IL1
"
::= { pmpump3MesrClient 36 }
--- *****************************************************
--- LEAF for the laser1Temp article
--- *****************************************************
pmpump3Mesrlaser1Temp OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Booster / IL1 Pump Temperature
:This OID gives the temperature
value of the pump linked to the
IL1 (Temperature = AV/256) (Unit
= C) <Help> This measure gives
the temperature value of the pump
linked to the IL1
"
::= { pmpump3MesrClient 37 }
--- *****************************************************
--- LEAF for the laser2Pwr article
--- *****************************************************
pmpump3Mesrlaser2Pwr OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pump Power : This
OID gives the power value provided
by the external pump to the IL2
(Power = AV/20) (Unit = mW) <Help>
This measure gives the power
provided by the pump to the IL2
"
::= { pmpump3MesrLine 44 }
--- *****************************************************
--- LEAF for the laser2Temp article
--- *****************************************************
pmpump3Mesrlaser2Temp OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Pre-Amp / IL2 Pump Temperature
:This OID gives the temperature
value of the pump linked to the
IL2 (Temperature = AV/256) (Unit
= C) <Help> This measure gives
the temperature value of the pump
linked to the IL2
"
::= { pmpump3MesrLine 45 }
--- *****************************************************
--- LEAF for the tempMeas article
--- *****************************************************
pmpump3MesrtempMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Temperature :This OID gives
the temperature of the PM (Temperature
= AV/256) (Unit = C) <Help>
This measure gives the temperature
of the module
"
::= { pmpump3MesrOther 74 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- CONFIG
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the table Group noValue
--- *****************************************************
pmpump3CfgNoValue OBJECT IDENTIFIER ::= { pmpump3Config 1 }
--- *****************************************************
--- LEAF for the table 2111
--- *****************************************************
pmpump3tableclientStartup OBJECT IDENTIFIER ::= { pmpump3CfgNoValue 1 }
pmpump3Cfglaser1Ctrl OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on IL1 pump Laser
:This OID configures the default
initialisation settings on the
IL1 pump laser.
"
::= { pmpump3tableclientStartup 2 }
--- *****************************************************
--- LEAF for the table Group lineStartUp
--- *****************************************************
pmpump3CfgLineStartUp OBJECT IDENTIFIER ::= { pmpump3Config 2 }
--- *****************************************************
--- LEAF for the table 2191
--- *****************************************************
pmpump3tablelineStartup OBJECT IDENTIFIER ::= { pmpump3CfgLineStartUp 1 }
pmpump3Cfglaser2Ctrl OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on IL2 pump Laser
:This OID configures the default
initialisation settings on the
IL2 pump laser.
"
::= { pmpump3tablelineStartup 2 }
--- *****************************************************
--- LEAF for the table Group labels
--- *****************************************************
pmpump3CfgLabels OBJECT IDENTIFIER ::= { pmpump3Config 3 }
--- *****************************************************
--- LEAF for the table NO_VALUE
--- *****************************************************
pmpump3CfgLabelclientTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmpump3CfgLabelclientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of Article
"
::= { pmpump3CfgLabels 1 }
pmpump3CfgLabelclientEntry OBJECT-TYPE
SYNTAX Pmpump3CfgLabelclientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the labels
table
"
INDEX { pmpump3CfgLabelclientIndex }
::= { pmpump3CfgLabelclientTable 1 }
Pmpump3CfgLabelclientEntry ::=
SEQUENCE {
pmpump3CfgLabelclientIndex
INTEGER,
pmpump3CfgLabelclientPortn
DisplayString
}
pmpump3CfgLabelclientIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the labelclient
table
"
::= { pmpump3CfgLabelclientEntry 1 }
pmpump3CfgLabelclientPortn OBJECT-TYPE
SYNTAX DisplayString( SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default settings on the label
of the Ports :These registers
configures the default initialisation
settings of the labels of the ports.
"
::= { pmpump3CfgLabelclientEntry 3 }
--- *****************************************************
--- LEAF for the table NO_VALUE
--- *****************************************************
pmpump3CfgLabellineTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmpump3CfgLabellineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of Article
"
::= { pmpump3CfgLabels 2 }
pmpump3CfgLabellineEntry OBJECT-TYPE
SYNTAX Pmpump3CfgLabellineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the labels
table
"
INDEX { pmpump3CfgLabellineIndex }
::= { pmpump3CfgLabellineTable 1 }
Pmpump3CfgLabellineEntry ::=
SEQUENCE {
pmpump3CfgLabellineIndex
INTEGER,
pmpump3CfgLabellinePortn
DisplayString
}
pmpump3CfgLabellineIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the labelline
table
"
::= { pmpump3CfgLabellineEntry 1 }
pmpump3CfgLabellinePortn OBJECT-TYPE
SYNTAX DisplayString( SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default settings on the label
of the lines :These registers
configures the default initialisation
settings of the labels of the lines.
"
::= { pmpump3CfgLabellineEntry 3 }
pmpump3CfgWriteConfiguration OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write configuration to module:This OID
writes the complete configuration to the module"
::= { pmpump3Config 257 }
--- *****************************************************
--- TRAP OBJECTS
--- *****************************************************
pmpump3trapBoardNumber OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last module which generates a trap"
::= { pmpump3traps 4 }
--- *****************************************************
--- GLOBAL TRAPS
--- *****************************************************
pmpump3Laser2TrapNotUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser2Warning, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Pre-Amp/IL2 Pump Not Urgent ON"
--&ACTIONS { log, minor }
--&MATCH { pmpump3AlmLaser2Warning "on", pmpump3trapBoardNumber "$2"}
--&MESG "DDM Warning appears on Pre-Amp/IL2 Pump of PM PUMP3 in slot $2 ($A)"
DESCRIPTION "Not urgent Line default is activated"
::= { pmpump3traps 30 }
pmpump3Laser2TrapNotUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser2Warning, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Pre-Amp/IL2 Pump Not Urgent OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PM PUMP3 Pre-Amp/IL2 Pump Not Urgent ON"}
--&MATCH { pmpump3AlmLaser2Warning "on", pmpump3trapBoardNumber "$2"}
--&MESG "DDM Warning disappears on Pre-Amp/IL2 Pump of PM PUMP3 in slot $2 ($A)"
DESCRIPTION "Not urgent Line default disappeared"
::= { pmpump3traps 31 }
pmpump3Laser2TrapUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser2Alm, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Pre-Amp/IL2 Pump Urgent ON"
--&ACTIONS { log, major }
--&MATCH { pmpump3AlmLaser2Alm "on", pmpump3trapBoardNumber "$2"}
--&MESG "DDM Alarms appears on Pre-Amp/IL2 Pump of PM PUMP3 in slot $2 ($A)"
DESCRIPTION "Urgent Line default is activated"
::= { pmpump3traps 32 }
pmpump3Laser2TrapUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser2Alm, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Pre-Amp/IL2 Pump Urgent OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PM PUMP3 Pre-Amp/IL2 Pump Urgent ON"}
--&MATCH { pmpump3AlmLaser2Alm "on", pmpump3trapBoardNumber "$2"}
--&MESG "DDM Alarm disappears on Pre-Amp/IL2 Pump of PM PUMP3 in slot $2 ($A)"
DESCRIPTION "Urgent Line default disappeared"
::= { pmpump3traps 33 }
pmpump3Laser2TrapCritGoesOn NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser2Fail, pmpump3AlmLaser2HwFail, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Pre-Amp/IL2 Pump Fail ON"
--&ACTIONS { log, critical }
--&MATCH { pmpump3AlmLaser2Fail "on", pmpump3AlmLaser2HwFail "*", pmpump3trapBoardNumber "$3"}
--&MESG "Pre-Amp/IL2 Pump Down on PM PUMP3 in Slot $3 ($A)"
--&FILTNAME "PM PUMP3 Pre-Amp/IL2 Pump HW Fail ON (Hidden)"
--&ACTIONS { info }
--&MATCH { pmpump3AlmLaser2Fail "*", pmpump3AlmLaser2HwFail "on", pmpump3trapBoardNumber "$3"}
--&MESG "Pre-Amp/IL2 Pump Down on PM PUMP3 in Slot $3 ($A)"
DESCRIPTION "Critical Line default is activated"
::= { pmpump3traps 34 }
pmpump3Laser2TrapCritGoesOff NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser2Fail, pmpump3AlmLaser2HwFail, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Pre-Amp/IL2 Pump Fail OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PM PUMP3 Pre-Amp/IL2 Pump Fail ON" }
--&MATCH { pmpump3AlmLaser2Fail "on", pmpump3AlmLaser2HwFail "*", pmpump3trapBoardNumber "$3"}
--&MESG "Pre-Amp/IL2 Pump Up on PM PUMP3 in Slot $3 ($A)"
--&FILTNAME "PM PUMP3 Pre-Amp/IL2 Pump HW Fail OFF (Hidden)"
--&ACTIONS { info }
--&MATCH { pmpump3AlmLaser2Fail "*", pmpump3AlmLaser2HwFail "on", pmpump3trapBoardNumber "$3"}
--&MESG "Pre-Amp/IL2 Pump Up on PM PUMP3 in Slot $3 ($A)"
DESCRIPTION "Critical Line default disappeared"
::= { pmpump3traps 35 }
--- *****************************************************
--- PORTS TRAPS
--- *****************************************************
pmpump3Laser1TrapNotUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser1Warning, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Booster/IL1 Pump Not Urgent ON"
--&ACTIONS { log, minor }
--&MATCH { pmpump3AlmLaser1Warning "on", pmpump3trapBoardNumber "$2"}
--&MESG "DDM Warning appears on Booster/IL1 Pump of PM PUMP3 in slot $2 ($A)"
DESCRIPTION "Not urgent client default is activated"
::= { pmpump3traps 40 }
pmpump3Laser1TrapNotUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser1Warning, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Booster/IL1 Pump Not Urgent OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PM PUMP3 Booster/IL1 Pump Not Urgent ON"}
--&MATCH { pmpump3AlmLaser1Warning "on", pmpump3trapBoardNumber "$2"}
--&MESG "DDM Warning disappears on Booster/IL1 Pump of PM PUMP3 in slot $2 ($A)"
DESCRIPTION "Not urgent client default disappeared"
::= { pmpump3traps 41 }
pmpump3Laser1TrapUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser1Alm, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Booster/IL1 Pump Urgent ON"
--&ACTIONS { log, major }
--&MATCH { pmpump3AlmLaser1Alm "on", pmpump3trapBoardNumber "$2"}
--&MESG "DDM Alarms appears on Booster/IL1 Pump of PM PUMP3 in slot $2 ($A)"
DESCRIPTION "Urgent client default is activated"
::= { pmpump3traps 42 }
pmpump3Laser1TrapUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser1Alm, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Booster/IL1 Pump Urgent OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PM PUMP3 Booster/IL1 Pump Urgent ON"}
--&MATCH { pmpump3AlmLaser1Alm "on", pmpump3trapBoardNumber "$2"}
--&MESG "DDM Alarm disappears on Booster/IL1 Pump of PM PUMP3 in slot $2 ($A)"
DESCRIPTION "Urgent client default disappeared"
::= { pmpump3traps 43 }
pmpump3Laser1TrapCritGoesOn NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser1Fail, pmpump3AlmLaser1HwFail, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Booster/IL1 Pump Fail ON"
--&ACTIONS { log, critical }
--&MATCH { pmpump3AlmLaser1Fail "on", pmpump3AlmLaser1HwFail "*", pmpump3trapBoardNumber "$3"}
--&MESG "Booster/IL1 Pump Down on PM PUMP3 in Slot $3 ($A)"
--&FILTNAME "PM PUMP3 Booster/IL1 Pump HW Fail ON (Hidden)"
--&ACTIONS { info }
--&MATCH { pmpump3AlmLaser1Fail "*", pmpump3AlmLaser1HwFail "on", pmpump3trapBoardNumber "$3"}
--&MESG "Booster/IL1 Pump Down on PM PUMP3 in Slot $3 ($A)"
DESCRIPTION "Critical client default is activated"
::= { pmpump3traps 44 }
pmpump3Laser1TrapCritGoesOff NOTIFICATION-TYPE
OBJECTS {pmpump3AlmLaser1Fail, pmpump3AlmLaser1HwFail, pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Booster/IL1 Pump Fail OFF"
--&ACTIONS { log, normal }
--&CLEARS { "PM PUMP3 Booster/IL1 Pump Fail ON" }
--&MATCH { pmpump3AlmLaser1Fail "on", pmpump3AlmLaser1HwFail "*", pmpump3trapBoardNumber "$3"}
--&MESG "Booster/IL1 Pump Up on PM PUMP3 in Slot $3 ($A)"
--&FILTNAME "PM PUMP3 Booster/IL1 Pump HW Fail OFF (Hidden)"
--&ACTIONS { info }
--&MATCH { pmpump3AlmLaser1Fail "*", pmpump3AlmLaser1HwFail "on", pmpump3trapBoardNumber "$3"}
--&MESG "Booster/IL1 Pump Up on PM PUMP3 in Slot $3 ($A)"
DESCRIPTION "Critical client default disappeared"
::= { pmpump3traps 45 }
--- *****************************************************
--- HW TRAPS
--- *****************************************************
pmpump3PowerTrapUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmpump3AlmDefFuseB, pmpump3AlmDefFuseA , pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Fuse A Fail ON"
--&ACTIONS { log, major }
--&MATCH { pmpump3AlmDefFuseB "*", pmpump3AlmDefFuseA "on", pmpump3trapBoardNumber "$3"}
--&MESG "Power Input A Fail on PM PUMP3 in Slot $3 ($A)"
--&FILTNAME "PM PUMP3 Fuse B Fail ON"
--&ACTIONS { log, major }
--&MATCH { pmpump3AlmDefFuseB "on", pmpump3AlmDefFuseA "*", pmpump3trapBoardNumber "$3"}
--&MESG "Power Input B Fail on PM PUMP3 in Slot $3 ($A)"
DESCRIPTION "Urgent power supply default is activated"
::= { pmpump3traps 50 }
pmpump3PowerTrapUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmpump3AlmDefFuseB, pmpump3AlmDefFuseA , pmpump3trapBoardNumber}
STATUS current
--&FILTNAME "PM PUMP3 Fuse A&B Fail OFF"
--&ACTIONS { log, normal}
--&CLEARS { "PM PUMP3 Fuse A Fail ON", "PM PUMP3 Fuse B Fail ON" }
--&MATCH { pmpump3AlmDefFuseB "on", pmpump3AlmDefFuseA "on", pmpump3trapBoardNumber "$3"}
--&MESG "Power Inputs A and B Present on PM PUMP3 in Slot $3 ($A)"
DESCRIPTION "Urgent power supply default disappeared"
::= { pmpump3traps 51 }
END
View Git Blame Copy Permalink