WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/edgecore/ES3528-MIB

14054 lines
522 KiB
Plaintext
Raw Blame History

--------------------------------------------------
--Version Number:20070511001
--------------------------------------------------
ES3528-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Counter32,IpAddress,
NOTIFICATION-TYPE, enterprises, TimeTicks, Gauge32
FROM SNMPv2-SMI
DisplayString, RowStatus, TruthValue,RowPointer
FROM SNMPv2-TC
PortList,VlanIndex
FROM Q-BRIDGE-MIB
InterfaceIndex, ifIndex,InterfaceIndexOrZero
FROM IF-MIB
diffServClfrEntry, diffServMultiFieldClfrEntry,IndexIntegerNextFree,IndexInteger
FROM DIFFSERV-MIB
EnabledStatus
FROM P-BRIDGE-MIB
MacAddress
FROM TOKEN-RING-RMON-MIB
BridgeId, Timeout, dot1dStpPort,dot1dStpPortEntry
FROM BRIDGE-MIB
AreaID,BigMetric
FROM OSPF-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
dot1xAuthConfigEntry
FROM IEEE8021-PAE-MIB;
accton OBJECT IDENTIFIER ::= { enterprises 259 }
edgecore OBJECT IDENTIFIER ::= { accton 8 }
accessSwitchMgt OBJECT IDENTIFIER ::= { edgecore 2 }
es3528MIB MODULE-IDENTITY
LAST-UPDATED "200609180000Z"
ORGANIZATION "Accton Technology Corp."
CONTACT-INFO
"Accton Technology Corp.
Customer Service
Postal: No. 1 Creation Rd. III,
Science-based Industrial Park,
Hsinchu 300-77, Taiwan, R.O.C.
Tel: +886-3-5053801
Fax: +886-3-5780764
E-mail: sales_ec@edge-core.com"
DESCRIPTION
"The MIB module for ES3528."
REVISION "200612060000Z"
DESCRIPTION
"Initial version of this MIB."
::= { accessSwitchMgt 1 }
es3528MIBObjects OBJECT IDENTIFIER ::= { es3528MIB 1 }
es3528Notifications OBJECT IDENTIFIER ::= { es3528MIB 2 }
es3528Conformance OBJECT IDENTIFIER ::= { es3528MIB 3 }
--supported groups
switchMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 1 }
portMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 2 }
trunkMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 3 }
lacpMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 4 }
staMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 5 }
restartMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 7 }
mirrorMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 8 }
igmpSnoopMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 9 }
ipMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 10 }
vlanMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 12 }
priorityMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 13 }
trapDestMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 14 }
qosMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 16 }
securityMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 17 }
sysLogMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 19 }
lineMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 20 }
sysTimeMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 23 }
fileMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 24 }
dnsMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 26 }
stormMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 33 }
sysResourceMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 39 }
mvrMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 44 }
egressPacketBlockMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 45 }
dhcpSnoopMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 46 }
clusterMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 47 }
ipSrcGuardMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 48 }
oamMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 52 }
remoteMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 53 }
dynamicArpInspectionMgt OBJECT IDENTIFIER ::= { es3528MIBObjects 56 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
-- The Area ID, in OSPF, has the same format as an IP Address,
-- but has the function of defining a summarization point for
-- Link State Advertisements
OspfAreaID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An OSPF Area Identifier."
SYNTAX IpAddress
-- The OSPF Metric is defined as an unsigned value in the range
OspfBigMetric ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The OSPF External Metric."
SYNTAX Integer32 (0..'FFFFFE'h)
--sshv2 only start
KeySegment ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The total length of the key is 1024 characters,
it is divided into 8 parts and stored in 8 separated mib
variables as below:
Key1: part 1 of the key (1-128)
Key2: part 2 of the key (129-256)
Key3: part 3 of the key (257-384)
Key4: part 4 of the key (385-512)
Key5: part 5 of the key (513-640)
Key6: part 6 of the key (641-768)
Key7: part 7 of the key (769-896)
Key8: part 8 of the key (897-1024)
Please note that if the key string is less then 1024 characters,
the remaining part of the string will be filled by a zero-length string.
For example, if the length of the key is 129,
we will get a string of length 128 in Key1, and
a string of length 1 in Key2,
moreover, Key3 to Key8 will all be zero-length strings."
SYNTAX DisplayString(SIZE(0..128))
--sshv2 only end
ValidStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object to create and destroy
a table entry. This is a simplified variant of RowStatus as it
supports only two values. Setting it to valid(1) creates an entry.
Setting it to invalid(2) destroys an entry."
SYNTAX INTEGER { valid(1), invalid(2) }
StaPathCostMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The path cost mode of a spanning tree algorithm, short(1) indicates
that we retrieve/configure the spanning tree path cost as a 16 bit
value and long(2) indicates that we retrieve/configure the spanning
tree path cost as a 32 bit value."
SYNTAX INTEGER { short(1), long(2) }
FileCopyStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The file copy result status."
SYNTAX INTEGER {
fileCopyTftpUndefError(1),
fileCopyTftpFileNotFound(2),
fileCopyTftpAccessViolation(3),
fileCopyTftpDiskFull(4),
fileCopyTftpIllegalOperation(5),
fileCopyTftpUnkownTransferId(6),
fileCopyTftpFileExisted(7),
fileCopyTftpNoSuchUser(8),
fileCopyTftpTimeout(9),
fileCopyTftpSendError(10),
fileCopyTftpReceiverError(11),
fileCopyTftpSocketOpenError(12),
fileCopyTftpSocketBindError(13),
fileCopyTftpUserCancel(14),
fileCopyTftpCompleted(15),
fileCopyParaError(16),
fileCopyBusy(17),
fileCopyUnknown(18),
fileCopyReadFileError(19),
fileCopySetStartupError(20),
fileCopyFileSizeExceed(21),
fileCopyMagicWordError(22),
fileCopyImageTypeError(23),
fileCopyHeaderChecksumError(24),
fileCopyImageChecksumError(25),
fileCopyWriteFlashFinish(26),
fileCopyWriteFlashError(27),
fileCopyWriteFlashProgramming(28),
fileCopyError(29),
fileCopySuccess(30),
fileCopyCompleted(31)
}
--
-- switchMgt
--
-- Management for the switch system, or individual units
-- in a stackable switch system. For a non-stackable system,
-- only unit 1 exists.
switchNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of switches present on this system."
::= { switchMgt 2 }
switchInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
the switch units in this system."
::= { switchMgt 3 }
switchInfoEntry OBJECT-TYPE
SYNTAX SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table providing descriptions and status information for
switch units."
INDEX { swUnitIndex }
::= { switchInfoTable 1 }
SwitchInfoEntry ::= SEQUENCE
{
swUnitIndex Integer32,
swHardwareVer DisplayString,
swMicrocodeVer DisplayString,
swLoaderVer DisplayString,
swBootRomVer DisplayString,
swOpCodeVer DisplayString,
swPortNumber Integer32,
swPowerStatus INTEGER,
swRoleInSystem INTEGER,
swSerialNumber DisplayString,
swExpansionSlot1 INTEGER,
swExpansionSlot2 INTEGER,
swServiceTag DisplayString,
swModelNumber DisplayString,
swEpldVer DisplayString,
swExpectedModuleOpCodeVer DisplayString
}
swUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber."
::= { switchInfoEntry 1 }
swHardwareVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hardware version of the main board."
::= { switchInfoEntry 2 }
swMicrocodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Microcode version of the main board."
::= { switchInfoEntry 3 }
swLoaderVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loader version of the main board."
::= { switchInfoEntry 4 }
swBootRomVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot ROM code version of the main board."
::= { switchInfoEntry 5 }
swOpCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operation code version of the main board."
::= { switchInfoEntry 6 }
swPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ports on this switch."
::= { switchInfoEntry 7 }
swPowerStatus OBJECT-TYPE
SYNTAX INTEGER
{
internalPower(1),
redundantPower(2),
internalAndRedundantPower(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the switch using internalPower(1),
redundantPower(2) or both(3)"
::= { switchInfoEntry 8 }
swRoleInSystem OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
backupMaster(2),
slave(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system."
::= { switchInfoEntry 9 }
swSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of the switch."
::= { switchInfoEntry 10 }
swExpansionSlot1 OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
other(2),
hundredBaseFxScMmf(3),
hundredBaseFxScSmf(4),
hundredBaseFxMtrjMmf(5),
thousandBaseSxScMmf(6),
thousandBaseSxMtrjMmf(7),
thousandBaseXGbic(8),
thousandBaseLxScSmf(9),
thousandBaseT(10),
stackingModule(11),
thousandBaseSfp(12),
tenHundredBaseT4port(13),
tenHundredBaseFxMtrj4port(14),
comboStackingSfp(15),
tenHundredBaseT(16),
comboThousandBaseTxSfp(17),
eightPortSfpModule(18),
tenGigaPortModule(19)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of expansion module in this switch slot 1."
::= { switchInfoEntry 11 }
swExpansionSlot2 OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
other(2),
hundredBaseFxScMmf(3),
hundredBaseFxScSmf(4),
hundredBaseFxMtrjMmf(5),
thousandBaseSxScMmf(6),
thousandBaseSxMtrjMmf(7),
thousandBaseXGbic(8),
thousandBaseLxScSmf(9),
thousandBaseT(10),
stackingModule(11),
thousandBaseSfp(12),
tenHundredBaseT4port(13),
tenHundredBaseFxMtrj4port(14),
comboStackingSfp(15),
tenHundredBaseT(16),
comboThousandBaseTxSfp(17),
eightPortSfpModule(18),
tenGigaPortModule(19)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of expansion module in this switch slot 2."
::= { switchInfoEntry 12 }
swServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service tag serial-number of the switch."
::= { switchInfoEntry 13 }
swModelNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Model number of the switch."
::= { switchInfoEntry 14 }
swEpldVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The EPLD version of the switch."
::= { switchInfoEntry 15 }
swExpectedModuleOpCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The module opcode version reside in the switch, note that
this variable represent the desired version of the
module which might plug in. For version validation, only
the swExpectedModuleOpCodeVer of the master
is used. This object is compared with
the swModuleOpCodeVer of the master and all slaves."
::= { switchInfoEntry 16 }
switchOperState OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
unknown(2),
ok(3),
noncritical(4),
critical(5),
nonrecoverable(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global operation state of the switch."
::= { switchMgt 4 }
switchProductId OBJECT IDENTIFIER ::= { switchMgt 5 }
swProdName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product name of this switch."
::= { switchProductId 1 }
swProdManufacturer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product manufacturer of this switch."
::= { switchProductId 2 }
swProdDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product description of this switch."
::= { switchProductId 3 }
swProdVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The runtime code version of this switch."
::= { switchProductId 4 }
swProdUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The URL of this switch, which we can connect through
a web browser."
::= { switchProductId 5 }
swIdentifier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A unique identifier of which switch in the chassis is currently
being looked at."
::= { switchProductId 6 }
swChassisServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The service tag of the chassis this switch resides in."
::= { switchProductId 7 }
switchIndivPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchIndivPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table about the status of individual powers."
::= { switchMgt 6 }
switchIndivPowerEntry OBJECT-TYPE
SYNTAX SwitchIndivPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table about the status of individual power."
INDEX { swIndivPowerUnitIndex, swIndivPowerIndex }
::= { switchIndivPowerTable 1 }
SwitchIndivPowerEntry ::= SEQUENCE
{
swIndivPowerUnitIndex Integer32,
swIndivPowerIndex INTEGER,
swIndivPowerStatus INTEGER,
swIndivPowerType INTEGER
}
swIndivPowerUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This is defined as swUnitIndex."
::= { switchIndivPowerEntry 1 }
swIndivPowerIndex OBJECT-TYPE
SYNTAX INTEGER
{
internalPower(1),
externalPower(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "1 means internal power, 2 means external power."
::= { switchIndivPowerEntry 2 }
swIndivPowerStatus OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
green(2),
red(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "notPresent(1) means not present, green(2) means
up, red(3) means down."
::= { switchIndivPowerEntry 3 }
swIndivPowerType OBJECT-TYPE
SYNTAX INTEGER
{
dc-n48(1),
dc-p27(2),
ac(3),
dc-n48-wrong(4),
dc-p27-wrong(5),
none(6),
ac-wrong(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "These parameters indicate the power type used by the module.
The value dc-n48(1) means that the power module uses DC-N48 as power input.
The value dc-p27(2) means that the power module uses DC-P27 as power input.
The value ac means that the power module uses AC as power input.
The value dc-n48-wrong(4) means that the power module currently
uses DC-N48 as power input but the module is inconsistent with another
power module. The value dc-p27-wrong(5) means that the power module
currently uses DC-P27 as power input but the module is inconsistent with
with another power module. The value none(6) means that the power module
is not present. The value ac-wrong(7) means that the power module
currently uses AC as power input but the module is inconsistent with
another power module."
::= { switchIndivPowerEntry 4 }
switchJumboFrameStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable(1) means the Jumbo Frame has enabled, disabled(2)
means the Jumbo Frame has disabled."
::= { switchMgt 7 }
switchFanFailureNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This variable is used to display total number of
nonfuncitonal fans."
::= { switchMgt 17 }
amtrMgt OBJECT IDENTIFIER ::= { switchMgt 8 }
-- Address Management
amtrMacAddrAgingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If this is enabled(1), the MAC address table will age out according to
its timer. If this is disabled(2), the MAC address table will not
age out."
::= { amtrMgt 3 }
--switchFanTable
switchFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The fan status table."
::= { switchMgt 9 }
switchFanEntry OBJECT-TYPE
SYNTAX SwitchFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the switchFanTable."
INDEX { switchUnitIndex, switchFanIndex }
::= { switchFanTable 1 }
SwitchFanEntry ::= SEQUENCE
{
switchUnitIndex Integer32,
switchFanIndex Integer32,
switchFanStatus INTEGER,
switchFanAdminSpeed Integer32,
switchFanFailureCount Integer32,
switchFanOperSpeed Integer32
}
switchUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The unit of the switch for the stackable device."
::= { switchFanEntry 1 }
switchFanIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The unit number of the fan."
::= { switchFanEntry 2 }
switchFanStatus OBJECT-TYPE
SYNTAX INTEGER
{
ok(1),
failure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicating the status of the fan, 1:ok; 2:failure."
::= { switchFanEntry 3 }
switchFanAdminSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The speed of the fan, measured in rpm (rotations per
minute). Set this object to 0 to enter auto mode,
set to other values to enter manual mode."
::= { switchFanEntry 4 }
switchFanFailureCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total failure count of the fan since the switch
has reboot."
::= { switchFanEntry 5 }
switchFanOperSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational value of the fan speed, measured in rpm (rotations per
minute)."
::= { switchFanEntry 6 }
-- switchThermalTempTable
switchThermalTempTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchThermalTempEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table which collects temperature infomration of the
switch."
::= { switchMgt 11 }
switchThermalTempEntry OBJECT-TYPE
SYNTAX SwitchThermalTempEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the switchThermalTempTable."
INDEX { switchThermalTempUnitIndex,switchThermalTempThermalIndex}
::= { switchThermalTempTable 1 }
SwitchThermalTempEntry ::= SEQUENCE
{
switchThermalTempUnitIndex Integer32,
switchThermalTempThermalIndex Integer32,
switchThermalTempValue Integer32
}
switchThermalTempUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unit of the switch for stackable device."
::= { switchThermalTempEntry 1 }
switchThermalTempThermalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The thermal index of the switch."
::= { switchThermalTempEntry 2 }
switchThermalTempValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The temperature value in the device in grade Celsius."
::= { switchThermalTempEntry 3 }
--switchThermalActionTable
switchThermalActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchThermalActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the thermal action."
::= { switchMgt 12 }
switchThermalActionEntry OBJECT-TYPE
SYNTAX SwitchThermalActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the switchThermalActionTable."
INDEX { switchThermalActionUnitIndex,switchThermalActionThermalIndex,
switchThermalActionIndex }
::= { switchThermalActionTable 1 }
SwitchThermalActionEntry ::= SEQUENCE
{
switchThermalActionUnitIndex Integer32,
switchThermalActionThermalIndex Integer32,
switchThermalActionIndex Integer32,
switchThermalActionRisingThreshold Integer32,
switchThermalActionFallingThreshold Integer32,
switchThermalActionAction BITS,
switchThermalActionStatus ValidStatus
}
switchThermalActionUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The unit of the switch for stackable device."
::= { switchThermalActionEntry 1 }
switchThermalActionThermalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The thermal index of the switch."
::= { switchThermalActionEntry 2 }
switchThermalActionIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The action index of the switchTheramlActionTable."
::= { switchThermalActionEntry 3 }
switchThermalActionRisingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The rising threshold of the switch temperature."
::= { switchThermalActionEntry 4 }
switchThermalActionFallingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The falling threshold of the switch temperature."
::= { switchThermalActionEntry 5 }
switchThermalActionAction OBJECT-TYPE
SYNTAX BITS {
trap(0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The action that will be taken when the
temperature exceeds the rising threshold
or falls below the falling threshold."
::= { switchThermalActionEntry 6 }
switchThermalActionStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set valid(1) to create an entry, Set Invalid(2) to delete an entry."
::= { switchThermalActionEntry 7 }
switchModuleInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchModuleInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
the switch modules in this system."
::= { switchMgt 13 }
switchModuleInfoEntry OBJECT-TYPE
SYNTAX SwitchModuleInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table providing descriptions and status information for
switch modules."
INDEX { swModuleUnitIndex, swModuleModuleIndex }
::= { switchModuleInfoTable 1 }
SwitchModuleInfoEntry ::= SEQUENCE
{
swModuleUnitIndex Integer32,
swModuleModuleIndex Integer32,
swModuleHardwareVer DisplayString,
swModuleMicrocodeVer DisplayString,
swModuleLoaderVer DisplayString,
swModuleBootRomVer DisplayString,
swModuleOpCodeVer DisplayString,
swModulePortNumber Integer32,
swModuleSerialNumber DisplayString,
swModuleType INTEGER,
swModuleModelNumber DisplayString,
swModuleEpldVer DisplayString,
swModuleDescr DisplayString
}
swModuleUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber."
::= { switchModuleInfoEntry 1 }
swModuleModuleIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the module within the switch
for which this entry contains information."
::= { switchModuleInfoEntry 2 }
swModuleHardwareVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hardware version of the module board."
::= { switchModuleInfoEntry 3 }
swModuleMicrocodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Microcode version of the module board."
::= { switchModuleInfoEntry 4 }
swModuleLoaderVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loader version of the module board."
::= { switchModuleInfoEntry 5 }
swModuleBootRomVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot ROM code version of the module board."
::= { switchModuleInfoEntry 6 }
swModuleOpCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operation code version of the module board."
::= { switchModuleInfoEntry 7 }
swModulePortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ports of this module."
::= { switchModuleInfoEntry 8 }
swModuleSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of the module."
::= { switchModuleInfoEntry 9 }
swModuleType OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
other(2),
hundredBaseFxScMmf(3),
hundredBaseFxScSmf(4),
hundredBaseFxMtrjMmf(5),
thousandBaseSxScMmf(6),
thousandBaseSxMtrjMmf(7),
thousandBaseXGbic(8),
thousandBaseLxScSmf(9),
thousandBaseT(10),
stackingModule(11),
thousandBaseSfp(12),
tenHundredBaseT4port(13),
tenHundredBaseFxMtrj4port(14),
comboStackingSfp(15),
tenHundredBaseT(16),
comboThousandBaseTxSfp(17),
eightPortSfpModule(18),
tenGigaPortModule(19)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of module."
::= { switchModuleInfoEntry 10 }
swModuleModelNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Model number of the module."
::= { switchModuleInfoEntry 11 }
swModuleEpldVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The EPLD version of the module."
::= { switchModuleInfoEntry 12 }
swModuleDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION " A textual description of the entity to describe the
module."
::= { switchModuleInfoEntry 13 }
switchRenumberUnitID OBJECT-TYPE
SYNTAX INTEGER
{
renumber(1),
noRenumber(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value renumber will automatically assign an ID to
units in the stack; all UNIT IDs will be contiguous.
The system configurations are not changed but the system
will restart after renumbering is completed."
::= { switchMgt 14 }
--
-- portMgt
--
-- Management ports. This group also provides information
-- related to trunks because they share the same properties.
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk."
::= { portMgt 1 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, describing the configuration of
one switch port or trunk."
INDEX { portIndex }
::= { portTable 1 }
PortEntry ::= SEQUENCE
{
portIndex Integer32,
portName DisplayString,
portType INTEGER,
portSpeedDpxCfg INTEGER,
portFlowCtrlCfg INTEGER,
portCapabilities BITS,
portAutonegotiation EnabledStatus,
portSpeedDpxStatus INTEGER,
portFlowCtrlStatus INTEGER,
portTrunkIndex Integer32,
portComboForcedMode INTEGER,
portMdixMode INTEGER
}
portIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { portEntry 1 }
portName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later)."
::= { portEntry 2 }
portType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hundredBaseTX(2),
hundredBaseFX(3),
thousandBaseSX(4),
thousandBaseLX(5),
thousandBaseT(6),
thousandBaseGBIC(7),
thousandBaseSfp(8),
hundredBaseFxScSingleMode(9),
hundredBaseFxScMultiMode(10),
thousandBaseCX(11),
tenG(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the port type of the configuration of the switch."
::= { portEntry 3 }
portSpeedDpxCfg OBJECT-TYPE
SYNTAX INTEGER
{
reserved(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7),
halfDuplex10g(8),
fullDuplex10g(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
halfDuplex10g(8) - 10g and half duplex mode
fullDuplex10g(9) - 10g and full duplex mode
hundredBaseTX port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as:
fullDuplex100(5)
thousandBaseSX port can be set as:
fullDuplex1000(7)
thousandBaseLX port can be set as:
fullDuplex1000(7)
thousandBaseT port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
thousandBaseGBIC port can be set as:
fullDuplex1000(7)
thousandBaseSfp port can be set as:
fullDuplex1000(7)
hundredBaseFxScSingleMode port can be set as:
fullDuplex100(5)
hundredBaseFxScMultiMode port can be set as:
fullDuplex100(5)
thousandBaseCX port can be set as:
fullDuplex1000(7)
tenG port can be set as:
halfDuplex10g(8)
fullDuplex10g(9)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus."
DEFVAL { halfDuplex10 }
::= { portEntry 4 }
portFlowCtrlCfg OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
The actual flow control mechanism is used given by
portFlowCtrlStatus."
DEFVAL { enabled }
::= { portEntry 5 }
portCapabilities OBJECT-TYPE
SYNTAX BITS
{
portCap10half(0),
portCap10full(1),
portCap100half(2),
portCap100full(3),
portCap1000half(4),
portCap1000full(5),
portCap10gHalf(6),
portCap10gFull(7),
reserved8(8),
reserved9(9),
reserved10(10),
reserved11(11),
reserved12(12),
reserved13(13),
portCapSym(14),
portCapFlowCtrl(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port or trunk capabilities."
::= { portEntry 6 }
portAutonegotiation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether auto-negotiation is enabled."
::= { portEntry 7 }
portSpeedDpxStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7),
halfDuplex10g(8),
fullDuplex10g(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case the value is error(1)."
::= { portEntry 8 }
portFlowCtrlStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
backPressure(2),
dot3xFlowControl(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently configured then this value
is error(1)."
::= { portEntry 9 }
portTrunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding trunkPorts."
::= { portEntry 10 }
portComboForcedMode OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
copperForced(2),
copperPreferredAuto(3),
sfpForced(4),
sfpPreferredAuto(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal to none(1), and setting this variable to none(1) is
not allowed. copperForced(2) is set if user want to force
this combo port running in copper mode. copperPreferredAuto(3)
is obsoleted, and user shall not set this state. sfpForced(4)
is set if user want to force this combo port running in fiber
mode. sfpPreferredAuto(5) is set if user want to change copper or
fiber mode automatically by SFP transceiver present state. If SFP
transceiver is present, this combo port will run in fiber mode, and
if SFP transceiver is not present, this combo port will run in
copper mode."
::= { portEntry 12}
portMdixMode OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
straight(2),
crossover(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter can be configured to auto(1), which means the
connection mode will be auto detected; straight(2), which means
the connection is used the straight-through twisted pair cabling;
and crossover(3), which means the connection is used the crossover
twisted pair cabling."
::= { portEntry 14 }
portPacketFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortPacketFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configure to filter some special packets."
::= { portMgt 5 }
portPacketFilterEntry OBJECT-TYPE
SYNTAX PortPacketFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configure to filter some special packets."
INDEX { portPacketFilterIfIndex }
::= { portPacketFilterTable 1 }
PortPacketFilterEntry ::= SEQUENCE
{
portPacketFilterIfIndex Integer32,
portPacketFilterCdpStatus EnabledStatus,
portPacketFilterPvstStatus EnabledStatus
}
portPacketFilterIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the portPacketFilterTable. The
interface identified by a particular value of this
index is the same interface identified by the same value
of ifIndex in the IF-MIB."
::= { portPacketFilterEntry 1 }
portPacketFilterCdpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether CDP paket filtering is enabled."
::= { portPacketFilterEntry 2 }
portPacketFilterPvstStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether PVST paket filtering is enabled."
::= { portPacketFilterEntry 3 }
portVlanTrunkingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortVlanTrunkingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configures vlan trunking feature."
::= { portMgt 7 }
portVlanTrunkingEntry OBJECT-TYPE
SYNTAX PortVlanTrunkingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configures vlan trunking feature."
INDEX { portVlanTrunkingIfIndex }
::= { portVlanTrunkingTable 1 }
PortVlanTrunkingEntry ::= SEQUENCE
{
portVlanTrunkingIfIndex Integer32,
portVlanTrunkingStatus EnabledStatus
}
portVlanTrunkingIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk interface of the portVlanTrunkingTable.
The interface identified by a particular value of this
index is the same interface identified by the same value
of ifIndex in the IF-MIB."
::= { portVlanTrunkingEntry 1 }
portVlanTrunkingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether vlan trunking is enabled."
::= { portVlanTrunkingEntry 2 }
--
-- trunkMgt
--
-- Trunks: Provides additional information for Trunks
trunkMaxId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number for a trunk identifier."
::= { trunkMgt 1 }
trunkValidNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid trunks."
::= { trunkMgt 2 }
trunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table describing the configuration and status of each
trunk."
::= { trunkMgt 3 }
trunkEntry OBJECT-TYPE
SYNTAX TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry describing the configuration and status of a
particular trunk."
INDEX { trunkIndex }
::= { trunkTable 1 }
TrunkEntry ::= SEQUENCE
{
trunkIndex Integer32,
trunkPorts PortList,
trunkCreation INTEGER,
trunkStatus ValidStatus
}
trunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Identifies the trunk within the switch that is
described by the table entry."
::= { trunkEntry 1 }
trunkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The complete set of ports currently associated with
this trunk."
::= { trunkEntry 2 }
trunkCreation OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk."
::= { trunkEntry 3 }
trunkStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured."
::= { trunkEntry 4 }
trunkBalanceMode OBJECT-TYPE
SYNTAX INTEGER
{
macSrc(1),
macDst(2),
macSrcDst(3),
ipSrc(4),
ipDst(5),
ipSrcDst(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This defines the load balancing mode of trunks
in the system. It may be based on source and/or
destination MAC address or IP address.
macSrc(1) means source MAC address.
macDst(2) means destination MAC address.
macSrcDst(3) means source and destination MAC address.
ipSrc(4) means source IP address.
ipDst(5) means destination IP address.
ipSrcDst(6) means source and destination IP address."
::= { trunkMgt 4 }
---
--- lacpMgt
---
-- Management for Link Aggregation Control Protocol (LACP, 802.3ad),
-- that is dynamic trunking.
lacpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for LACP port configuration."
::= { lacpMgt 1 }
lacpPortEntry OBJECT-TYPE
SYNTAX LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure."
INDEX { lacpPortIndex }
::= { lacpPortTable 1 }
LacpPortEntry ::= SEQUENCE
{
lacpPortIndex Integer32,
lacpPortStatus EnabledStatus
}
lacpPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB."
::= { lacpPortEntry 1 }
lacpPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether 802.3ad LACP is enabled."
::= { lacpPortEntry 2 }
--
-- staMgt
--
-- Management for Spanning Tree Algorithm (STA).
-- This has variables not already defined in the implemented
-- standard MIB(s).
staSystemStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled."
DEFVAL { enabled }
::= { staMgt 1 }
staPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType."
REFERENCE "IEEE 802.1d, IEEE 802.1w, IEEE 802.1s."
::= { staMgt 2 }
staPortEntry OBJECT-TYPE
SYNTAX StaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual entry of staPortTable."
AUGMENTS { dot1dStpPortEntry }
::= { staPortTable 1 }
StaPortEntry ::= SEQUENCE
{
staPortFastForward EnabledStatus,
-- for MST, RSTP
staPortProtocolMigration TruthValue,
staPortAdminEdgePort TruthValue,
staPortOperEdgePort TruthValue,
staPortAdminPointToPoint INTEGER,
staPortOperPointToPoint TruthValue,
staPortSystemStatus EnabledStatus,
staPortLongAdminPathCost Integer32,
staPortLongOperPathCost Integer32,
-- for BPDU flooding configuration
staPortBpduFlooding EnabledStatus,
-- for Root Guard
staPortRootGuardAdminStatus EnabledStatus,
staPortRootGuardOperStatus EnabledStatus,
staPortBpduGuard EnabledStatus,
staPortAdminEdgePortWithAuto INTEGER,
staPortBpduFilter EnabledStatus
}
staPortFastForward OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether fast forwarding is enabled."
::= { staPortEntry 2 }
-- for MSTP RSTP
staPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read."
REFERENCE
"IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
::= { staPortEntry 3 }
staPortAdminEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the edge port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port and a value of false(2) indicates
that this port should be assumed as a non-edge-port."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.3"
::= { staPortEntry 4 }
staPortOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { staPortEntry 5 }
staPortAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER
{
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { staPortEntry 6 }
staPortOperPointToPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { staPortEntry 7 }
staPortSystemStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled."
DEFVAL { enabled }
::= { staPortEntry 9 }
staPortLongAdminPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
::= { staPortEntry 10 }
staPortLongOperPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
::= { staPortEntry 11 }
staPortBpduFlooding OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to configure the capability of BPDUs
flooding."
::= { staPortEntry 12 }
-- for Root Guard
staPortRootGuardAdminStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the desired status of the root guard. This variable configures the root
guard feature to enforce the root bridge placement in the network."
::= { staPortEntry 13 }
staPortRootGuardOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current operational status of the root guard which provides a
way to enforce the root bridge placement in the network."
::= { staPortEntry 14 }
staPortBpduGuard OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A value of enabled(1) indicates that BPDU port guard feature
is enabled for each port. A value of disabled(2) indicates
that the feature is disabled."
::= { staPortEntry 15 }
staPortAdminEdgePortWithAuto OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administrative value of the edge port parameter.
A value of enable(1) indicates that this port should be
assumed as an edge-port, a value of disable(2) indicates
that this port should be assumed as a non-edge-port and
a value of auot (3) indicates this port in RSPT or MSTP mode
should be assumed as an edge-port after migration or max age expire
without receiving any BPDU and sending BPDU with proposal flag on."
::= { staPortEntry 16 }
staPortBpduFilter OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administrative value of the BPDU filter parameter.
A value of enabled(1) indicates that this port will avoid
transmitting BPDUs on edge-port and the value of disabled(2)
indicates that this port will not avoid transmitting BPDUs
on edge-port."
::= { staPortEntry 17 }
staProtocolType OBJECT-TYPE
SYNTAX INTEGER {
stp(1),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently
running. The value 'stp(1)' indicates the Spanning Tree
Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that
the Rapid Spanning Tree Protocol is as specified in IEEE
802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning
Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the
protocol become available."
REFERENCE
"IEEE 802.1w clause 14.8.1, 17.12, 17.16.1"
::= { staMgt 3 }
staTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
REFERENCE
"IEEE 802.1w clause 17.16.6"
DEFVAL { 3 }
::= { staMgt 4 }
staPathCostMethod OBJECT-TYPE
SYNTAX StaPathCostMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the type of spanning tree path cost mode configured
on the switch. This mode applies to all instances of the
spanning tree protocol running on the switch.
When the value of this MIB object is changed, the path cost of
all ports will be reassigned to the default path cost values
based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2), the
staPortLongPathCost MIB object must be used to retrieve/configure
the spanning tree port path cost as a 32-bit value.
The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected.
While retrieving the value of dot1dStpPortPathCost, the maximum
value of 65535 will be returned if the value of staPortLongPathCost
for the same instance exceeds 65535.
When the value of this MIB object is set to short(1), the
dot1dStpPortPathCost in BRIDGE-MIB must be used."
DEFVAL { short }
::= { staMgt 5}
--
-- xstMgt
--
xstMgt OBJECT IDENTIFIER ::= { staMgt 6}
mstName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the Multiple Spanning Tree region."
::= { xstMgt 1 }
mstRevision OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Revision number of the Multiple Spanning Tree region."
::= { xstMgt 2 }
mstMaxHops OBJECT-TYPE
SYNTAX Integer32(1..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The max hop number counts of the Multiple Spanning Tree region."
::= { xstMgt 3 }
xstInstanceCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF XstInstanceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0."
::= { xstMgt 4 }
xstInstanceCfgEntry OBJECT-TYPE
SYNTAX XstInstanceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the property of the RST or MST instance."
INDEX { xstInstanceCfgIndex }
::= { xstInstanceCfgTable 1 }
XstInstanceCfgEntry ::= SEQUENCE
{
xstInstanceCfgIndex Integer32,
xstInstanceCfgPriority Integer32,
xstInstanceCfgTimeSinceTopologyChange TimeTicks,
xstInstanceCfgTopChanges Integer32,
xstInstanceCfgDesignatedRoot BridgeId,
xstInstanceCfgRootCost Integer32,
xstInstanceCfgRootPort Integer32,
xstInstanceCfgMaxAge Timeout,
xstInstanceCfgHelloTime Timeout,
xstInstanceCfgHoldTime Timeout,
xstInstanceCfgForwardDelay Timeout,
xstInstanceCfgBridgeMaxAge Timeout,
xstInstanceCfgBridgeHelloTime Timeout,
xstInstanceCfgBridgeForwardDelay Timeout,
xstInstanceCfgTxHoldCount Integer32,
xstInstanceCfgPathCostMethod StaPathCostMode
}
xstInstanceCfgIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {xstInstanceCfgEntry 1 }
xstInstanceCfgPriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096."
::= { xstInstanceCfgEntry 2 }
xstInstanceCfgTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST."
::= { xstInstanceCfgEntry 3 }
xstInstanceCfgTopChanges OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized."
::= { xstInstanceCfgEntry 4 }
xstInstanceCfgDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root identifier parameter in
all configuration bridge PDUs originated by this node."
REFERENCE "IEEE 802.1w."
::= { xstInstanceCfgEntry 5 }
xstInstanceCfgRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The cost of the path to the root as seen from
this bridge of the RST or MST."
::= { xstInstanceCfgEntry 6 }
xstInstanceCfgRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST."
::= { xstInstanceCfgEntry 7 }
xstInstanceCfgMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is the actual
value that this bridge is currently using."
::= { xstInstanceCfgEntry 8 }
xstInstanceCfgHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using in RST or MST."
::= { xstInstanceCfgEntry 9 }
xstInstanceCfgHoldTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
::= { xstInstanceCfgEntry 10 }
xstInstanceCfgForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the port
stays in each of the listening and learning
states, which precede the forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the forwarding database. This value is the
current value being used by the bridge.
xstInstanceCfgBridgeForwardDelay defines the value that
this bridge and all others would start using
if/when this bridge were to become the root."
::= { xstInstanceCfgEntry 11 }
xstInstanceCfgBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the value of
xstInstanceCfgBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 12 }
xstInstanceCfgBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 13 }
xstInstanceCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to the value of
xstInstanceCfgBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 14 }
xstInstanceCfgTxHoldCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate."
::= { xstInstanceCfgEntry 15 }
xstInstanceCfgPathCostMethod OBJECT-TYPE
SYNTAX StaPathCostMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.
When the value of this MIB object is changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2),
the xstInstancePortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32-bit value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of xstInstancePortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is set to short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used."
::= { xstInstanceCfgEntry 16 }
xstInstancePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF XstInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration."
::= { xstMgt 5 }
xstInstancePortEntry OBJECT-TYPE
SYNTAX XstInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for xstInstancePortTable."
INDEX { xstInstanceCfgIndex, dot1dStpPort }
::= { xstInstancePortTable 1 }
XstInstancePortEntry ::= SEQUENCE
{
xstInstancePortPriority Integer32,
xstInstancePortState INTEGER,
xstInstancePortEnable EnabledStatus,
xstInstancePortDesignatedRoot BridgeId,
xstInstancePortDesignatedCost Integer32,
xstInstancePortDesignatedBridge BridgeId,
xstInstancePortDesignatedPort OCTET STRING,
xstInstancePortForwardTransitions Counter32,
xstInstancePortPortRole INTEGER,
xstInstancePortAdminPathCost Integer32,
xstInstancePortOperPathCost Integer32
}
xstInstancePortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active link
in the Spanning Tree. This makes a port with higher
priority less likely to be blocked if the Spanning Tree
Algorithm is detecting network loops. Where more than one
port is assigned the highest priority, the port with
lowest numeric identifier will be enabled."
::= { xstInstancePortEntry 3 }
xstInstancePortState OBJECT-TYPE
SYNTAX INTEGER {
discarding(1),
learning(2),
forwarding(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
but does not forward packets.
learning(2): Port has transmitted configuration messages
for an interval set by the Forward Delay
parameter without receiving contradictory
information. Port address table is cleared,
and the port begins learning addresses.
forwarding(3): Port forwards packets, and continues learning
addresses.
For ports which are disabled (see xstInstancePortEnable),
this object will have a value of discarding(1)."
::= { xstInstancePortEntry 4}
xstInstancePortEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enabled/disabled status of the port."
::= { xstInstancePortEntry 5 }
xstInstancePortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached."
::= { xstInstancePortEntry 7 }
xstInstancePortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs."
::= { xstInstancePortEntry 8 }
xstInstancePortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment."
::= { xstInstancePortEntry 9 }
xstInstancePortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of the port on the designated
bridge for this port's segment."
::= { xstInstancePortEntry 10 }
xstInstancePortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
from the learning state to the forwarding state."
::= { xstInstancePortEntry 11 }
xstInstancePortPortRole OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
root(2),
designated(3),
alternate(4),
backup(5),
master(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port is connecting a LAN through the bridge to the
root bridge (i.e., designated port)
(4) The port may provide connectivity if other
bridges, bridge ports, or LANs fail or are removed.
(5) The port provides backup if other
bridges, bridge ports, or LANs fail or are removed.
(6) For MST protocol only, indicates whether this instance
is in a master role."
::= { xstInstancePortEntry 12 }
xstInstancePortAdminPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The admin value of the MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority)."
::= { xstInstancePortEntry 13 }
xstInstancePortOperPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority)."
::= { xstInstancePortEntry 14 }
mstInstanceEditTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The instance table for the Multiple Spanning Tree region"
::= { xstMgt 6 }
mstInstanceEditEntry OBJECT-TYPE
SYNTAX MstInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceEditIndex }
::= { mstInstanceEditTable 1 }
MstInstanceEditEntry ::= SEQUENCE
{
mstInstanceEditIndex Integer32,
mstInstanceEditVlansMap OCTET STRING,
mstInstanceEditVlansMap2k OCTET STRING,
mstInstanceEditVlansMap3k OCTET STRING,
mstInstanceEditVlansMap4k OCTET STRING,
mstInstanceEditRemainingHops Integer32
}
mstInstanceEditIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {mstInstanceEditEntry 1 }
mstInstanceEditVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 2 }
mstInstanceEditVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 3 }
mstInstanceEditVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 4 }
mstInstanceEditVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 5 }
mstInstanceEditRemainingHops OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remaining hop count for this MST instance."
::= { mstInstanceEditEntry 6 }
--mstInstanceOperTable
mstInstanceOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstInstanceOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Multiple Spanning Tree region instance vlan mapped table."
::= { xstMgt 7 }
mstInstanceOperEntry OBJECT-TYPE
SYNTAX MstInstanceOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceOperIndex }
::= { mstInstanceOperTable 1 }
MstInstanceOperEntry ::= SEQUENCE
{
mstInstanceOperIndex Integer32,
mstInstanceOperVlansMap OCTET STRING,
mstInstanceOperVlansMap2k OCTET STRING,
mstInstanceOperVlansMap3k OCTET STRING,
mstInstanceOperVlansMap4k OCTET STRING
}
mstInstanceOperIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {mstInstanceOperEntry 1 }
mstInstanceOperVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 2 }
mstInstanceOperVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 3 }
mstInstanceOperVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 4 }
mstInstanceOperVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 5 }
staLoopbackDetectionPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaLoopbackDetectionPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table provides the mechanism to configure the
spanning tree loopback detection of each port or trunk"
::= { staMgt 7 }
staLoopbackDetectionPortEntry OBJECT-TYPE
SYNTAX StaLoopbackDetectionPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of staLoopbackDetectionPortTable."
INDEX { staLoopbackDetectionPortIfIndex}
::= { staLoopbackDetectionPortTable 1 }
StaLoopbackDetectionPortEntry ::= SEQUENCE
{
staLoopbackDetectionPortIfIndex InterfaceIndex,
staLoopbackDetectionPortStatus EnabledStatus,
staLoopbackDetectionPortTrapStatus EnabledStatus,
staLoopbackDetectionPortReleaseMode INTEGER,
staLoopbackDetectionPortRelease INTEGER
}
staLoopbackDetectionPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk interfaces of the portTable. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { staLoopbackDetectionPortEntry 1 }
staLoopbackDetectionPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status of the port on whether spanning tree loopback detection is enabled."
::= { staLoopbackDetectionPortEntry 2 }
staLoopbackDetectionPortTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the loopback BPDUs have been detected."
::= { staLoopbackDetectionPortEntry 3 }
staLoopbackDetectionPortReleaseMode OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
manual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting it to auto(1) indicates that this port can be released
from discarding state automatically after loopback has occurred.
Setting it to manual(2) indicates that this port can be released
from discarding state manually after loopback has occurred."
::= { staLoopbackDetectionPortEntry 4 }
staLoopbackDetectionPortRelease OBJECT-TYPE
SYNTAX INTEGER
{
noRelease(1),
release(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this to release(2) to release the port from discarding state.
noRelease(1) will always be obtained when reading this variable."
::= { staLoopbackDetectionPortEntry 5 }
--
-- restartMgt
--
-- Management for restarting the switch.
restartOpCodeFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of op-code file for start-up."
::= { restartMgt 1 }
restartConfigFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of configuration file for start-up."
::= { restartMgt 2 }
restartControl OBJECT-TYPE
SYNTAX INTEGER {
running(1),
warmBoot(2),
coldBoot(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to warmBoot(2) causes the device to
reinitialize itself such that neither the agent configuration
nor the protocol entity implementation is altered. Setting this
object to coldBoot(3) causes the device to reinitialize itself such
that the agent's configuration or the protocol entity implementation
may be altered. When the device is running normally, this
variable has a value of running(1)."
::= { restartMgt 3 }
--
-- mirrorMgt
--
-- Management for port mirroring.
mirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF MirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports."
::= { mirrorMgt 1 }
mirrorEntry OBJECT-TYPE
SYNTAX MirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of mirrorTable."
INDEX { mirrorDestinationPort, mirrorSourcePort }
::= { mirrorTable 1 }
MirrorEntry ::= SEQUENCE
{
mirrorDestinationPort Integer32,
mirrorSourcePort Integer32,
mirrorType INTEGER,
mirrorStatus ValidStatus
}
mirrorDestinationPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { mirrorEntry 1 }
mirrorSourcePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { mirrorEntry 2 }
mirrorType OBJECT-TYPE
SYNTAX INTEGER
{
rx(1),
tx(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored."
::= { mirrorEntry 3 }
mirrorStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { mirrorEntry 4 }
--
-- igmpSnoopMgt
--
-- Management for Internet Group Management Protocol (IGMP)
-- Snooping.
igmpSnoopStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping on the device.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports. "
DEFVAL { enabled }
::= { igmpSnoopMgt 1 }
igmpSnoopQuerier OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables (disables) whether the switch acts as an IGMP
querier."
DEFVAL { enabled }
::= { igmpSnoopMgt 2 }
igmpSnoopQueryCount OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The query count from a querier, during which a response is
expected from an endstation. If a querier has sent a
number of counts defined by igmpSnoopQueryCount, but an
endstation has not responded, a countdown timer is
started using the time defined by igmpSnoopQueryMaxResponseTime.
If the countdown finishes, and the endstation still has
not responded, then that endstation is deemed to have left
the multicast group."
DEFVAL { 2 }
::= { igmpSnoopMgt 3 }
igmpSnoopQueryInterval OBJECT-TYPE
SYNTAX Integer32 (60..125)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval (in seconds) between IGMP host-query
messages sent by the switch."
DEFVAL { 125 }
::= { igmpSnoopMgt 4 }
igmpSnoopQueryMaxResponseTime OBJECT-TYPE
SYNTAX Integer32 (5..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time after a query, during which a response is
expected from an endstation. If a querier has sent
a number of queries defined by igmpSnoopQueryCount,
but an endstation has not responded, a countdown
timer is started using an initial value set by
igmpSnoopQueryMaxResponseTime. If the countdown
finishes, and the endstation still has not responded,
then that the endstation is deemed to have
left the multicast group."
DEFVAL { 10 }
::= { igmpSnoopMgt 5 }
igmpSnoopRouterPortExpireTime OBJECT-TYPE
SYNTAX Integer32 (300..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires."
DEFVAL { 300 }
::= { igmpSnoopMgt 6 }
igmpSnoopVersion OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IGMP version snooped"
DEFVAL { 2 }
::= { igmpSnoopMgt 7 }
igmpSnoopRouterCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for current router ports."
::= { igmpSnoopMgt 8 }
igmpSnoopRouterCurrentEntry OBJECT-TYPE
SYNTAX IgmpSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for current router ports."
INDEX { igmpSnoopRouterCurrentVlanIndex }
::= {
igmpSnoopRouterCurrentTable 1 }
IgmpSnoopRouterCurrentEntry ::=
SEQUENCE {
igmpSnoopRouterCurrentVlanIndex
Unsigned32,
igmpSnoopRouterCurrentPorts
PortList,
igmpSnoopRouterCurrentStatus
PortList
}
igmpSnoopRouterCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterCurrentEntry 1 }
igmpSnoopRouterCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The set of ports which are current router ports, including static
router ports. Please refer to igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterCurrentEntry 2 }
igmpSnoopRouterCurrentStatus OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are static router ports."
::= { igmpSnoopRouterCurrentEntry 3 }
igmpSnoopRouterStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for static router ports."
::= { igmpSnoopMgt 9 }
igmpSnoopRouterStaticEntry OBJECT-TYPE
SYNTAX IgmpSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for static router ports."
INDEX { igmpSnoopRouterStaticVlanIndex }
::= {
igmpSnoopRouterStaticTable 1 }
IgmpSnoopRouterStaticEntry ::=
SEQUENCE {
igmpSnoopRouterStaticVlanIndex
Unsigned32,
igmpSnoopRouterStaticPorts
PortList,
igmpSnoopRouterStaticStatus
ValidStatus
}
igmpSnoopRouterStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterStaticEntry 1 }
igmpSnoopRouterStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are static router ports."
::= { igmpSnoopRouterStaticEntry 2 }
igmpSnoopRouterStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopRouterStaticEntry 3 }
igmpSnoopMulticastCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopMulticastCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for current multicast addresses."
::= { igmpSnoopMgt 10 }
igmpSnoopMulticastCurrentEntry OBJECT-TYPE
SYNTAX IgmpSnoopMulticastCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for current multicast addresses."
INDEX { igmpSnoopMulticastCurrentVlanIndex,
igmpSnoopMulticastCurrentIpAddress }
::= {
igmpSnoopMulticastCurrentTable 1 }
IgmpSnoopMulticastCurrentEntry ::=
SEQUENCE {
igmpSnoopMulticastCurrentVlanIndex
Unsigned32,
igmpSnoopMulticastCurrentIpAddress
IpAddress,
igmpSnoopMulticastCurrentPorts
PortList,
igmpSnoopMulticastCurrentStatus
PortList
}
igmpSnoopMulticastCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastCurrentEntry 1 }
igmpSnoopMulticastCurrentIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of multicast group."
::= { igmpSnoopMulticastCurrentEntry 2 }
igmpSnoopMulticastCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are members of a multicast group, including
static members. Please refer to igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastCurrentEntry 3 }
igmpSnoopMulticastCurrentStatus OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are static members."
::= { igmpSnoopMulticastCurrentEntry 4 }
igmpSnoopMulticastStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for static multicast addresses."
::= { igmpSnoopMgt 11 }
igmpSnoopMulticastStaticEntry OBJECT-TYPE
SYNTAX IgmpSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for static multicast addresses."
INDEX { igmpSnoopMulticastStaticVlanIndex,
igmpSnoopMulticastStaticIpAddress }
::= {
igmpSnoopMulticastStaticTable 1 }
IgmpSnoopMulticastStaticEntry ::=
SEQUENCE {
igmpSnoopMulticastStaticVlanIndex
Unsigned32,
igmpSnoopMulticastStaticIpAddress
IpAddress,
igmpSnoopMulticastStaticPorts
PortList,
igmpSnoopMulticastStaticStatus
ValidStatus
}
igmpSnoopMulticastStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastStaticEntry 1 }
igmpSnoopMulticastStaticIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of multicast group."
::= { igmpSnoopMulticastStaticEntry 2 }
igmpSnoopMulticastStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are members."
::= { igmpSnoopMulticastStaticEntry 3 }
igmpSnoopMulticastStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopMulticastStaticEntry 4 }
igmpSnoopCurrentVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopCurrentVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for enabling or disabling IGMP snooping per VLAN."
::= { igmpSnoopMgt 14 }
igmpSnoopCurrentVlanEntry OBJECT-TYPE
SYNTAX IgmpSnoopCurrentVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for enabling or disabling IGMP snooping."
INDEX { igmpSnoopCurrentVlanIndex }
::= { igmpSnoopCurrentVlanTable 1 }
IgmpSnoopCurrentVlanEntry ::= SEQUENCE
{
igmpSnoopCurrentVlanIndex Unsigned32,
igmpSnoopCurrentVlanImmediateLeave EnabledStatus
}
igmpSnoopCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface."
::= { igmpSnoopCurrentVlanEntry 1 }
igmpSnoopCurrentVlanImmediateLeave OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter to enable or disable the Immediate-Leave feature on this VLAN."
::= { igmpSnoopCurrentVlanEntry 3 }
igmpSnoopLeaveProxy OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This enables or disables Leave Proxy for IGMP Snooping."
::= { igmpSnoopMgt 15 }
igmpSnoopReportSuppressionStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Parameter to enable or disable IGMP snooping report suppression on the device.
When enabled, the device will suppress superabundance report and leave packets.
Only the First copy of Report Packet or the Last copy of Leave Packet for the
same Group will be forwarded to route ports.
Status changed to deprecated:this function is always enable."
DEFVAL { enabled }
::= { igmpSnoopMgt 16 }
igmpSnoopFilterStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Parameter to enable or disable IGMP filtering on the device."
::= { igmpSnoopMgt 17 }
igmpSnoopProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the IGMP snooping profile."
::= { igmpSnoopMgt 18 }
igmpSnoopProfileEntry OBJECT-TYPE
SYNTAX IgmpSnoopProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the IGMP snooping profile."
INDEX { igmpSnoopProfileId }
::= { igmpSnoopProfileTable 1 }
IgmpSnoopProfileEntry ::= SEQUENCE
{
igmpSnoopProfileId Unsigned32,
igmpSnoopProfileAction INTEGER,
igmpSnoopProfileStatus ValidStatus
}
igmpSnoopProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ID of the IGMP snooping profile."
::= { igmpSnoopProfileEntry 1 }
igmpSnoopProfileAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The access mode of the IGMP snooping profile."
DEFVAL { deny }
::= { igmpSnoopProfileEntry 2 }
igmpSnoopProfileStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopProfileEntry 3 }
igmpSnoopProfileCtl OBJECT IDENTIFIER ::= { igmpSnoopMgt 19 }
igmpSnoopProfileCtlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ID of the IGMP snooping profile."
::= { igmpSnoopProfileCtl 1 }
igmpSnoopProfileCtlInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type is associated with this agent.
Only ipv4(1) type is supported."
::= { igmpSnoopProfileCtl 2 }
igmpSnoopProfileCtlStartInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The specified addresses in the start of the controlled IP multicast addresses."
::= { igmpSnoopProfileCtl 3 }
igmpSnoopProfileCtlEndInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The specified addresses in the end of the controlled IP multicast addresses."
::= { igmpSnoopProfileCtl 4 }
igmpSnoopProfileCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
create(2),
destroy(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting it to create(2) creates the range of the controlled IP multicast addresses.
Setting it to destroy(3) destroys the range of the controlled IP multicast addresses.
When the action is completed, this object becomes noAction(1)."
::= { igmpSnoopProfileCtl 5 }
igmpSnoopProfileRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopProfileRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the range of the IGMP snooping profile."
::= { igmpSnoopMgt 20 }
igmpSnoopProfileRangeEntry OBJECT-TYPE
SYNTAX IgmpSnoopProfileRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the range of the IGMP snooping profile."
INDEX { igmpSnoopProfileRangeProfileId ,igmpSnoopProfileRangeInetAddressType,igmpSnoopProfileRangeStartInetAddress }
::= { igmpSnoopProfileRangeTable 1 }
IgmpSnoopProfileRangeEntry ::= SEQUENCE
{
igmpSnoopProfileRangeProfileId Unsigned32,
igmpSnoopProfileRangeInetAddressType InetAddressType,
igmpSnoopProfileRangeStartInetAddress InetAddress,
igmpSnoopProfileRangeEndInetAddress InetAddress,
igmpSnoopProfileRangeAction INTEGER
}
igmpSnoopProfileRangeProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as igmpSnoopProfileId."
::= { igmpSnoopProfileRangeEntry 1 }
igmpSnoopProfileRangeInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type is associated with this agent.
Only ipv4(1) type is supported."
::= { igmpSnoopProfileRangeEntry 2 }
igmpSnoopProfileRangeStartInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The specified addresses in the start of the controlled IP multicast addresses."
::= { igmpSnoopProfileRangeEntry 3 }
igmpSnoopProfileRangeEndInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The specified addresses in the end of the controlled IP multicast addresses."
::= { igmpSnoopProfileRangeEntry 4 }
igmpSnoopProfileRangeAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The access mode of the IGMP snooping profile."
DEFVAL { deny }
::= { igmpSnoopProfileRangeEntry 5 }
igmpSnoopFilterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in IGMP filtering."
::= { igmpSnoopMgt 21 }
igmpSnoopFilterPortEntry OBJECT-TYPE
SYNTAX IgmpSnoopFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in IGMP filtering."
INDEX { igmpSnoopFilterPortIndex }
::= { igmpSnoopFilterPortTable 1 }
IgmpSnoopFilterPortEntry ::= SEQUENCE
{
igmpSnoopFilterPortIndex Unsigned32,
igmpSnoopFilterPortProfileId Integer32
}
igmpSnoopFilterPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB."
::= { igmpSnoopFilterPortEntry 1 }
igmpSnoopFilterPortProfileId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The igmpSnoopProfileEntry identified by a particular value of this index
is the same interface identified by the same value of the igmpSnoopProfileId
object. If there is no corresponding entry in the igmpSnoopProfileTable,
then no association exists. In particular, if this value is zero, no
associated profile will be generated, as zero is not a valid profile index."
::= { igmpSnoopFilterPortEntry 2 }
igmpSnoopThrottlePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopThrottlePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in IGMP throttling."
::= { igmpSnoopMgt 22 }
igmpSnoopThrottlePortEntry OBJECT-TYPE
SYNTAX IgmpSnoopThrottlePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in IGMP throttling."
INDEX { igmpSnoopThrottlePortIndex }
::= { igmpSnoopThrottlePortTable 1 }
IgmpSnoopThrottlePortEntry ::= SEQUENCE
{
igmpSnoopThrottlePortIndex Unsigned32,
igmpSnoopThrottlePortRunningStatus INTEGER,
igmpSnoopThrottlePortAction INTEGER,
igmpSnoopThrottlePortMaxGroups Integer32,
igmpSnoopThrottlePortCurrentGroups Integer32
}
igmpSnoopThrottlePortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB."
::= { igmpSnoopThrottlePortEntry 1 }
igmpSnoopThrottlePortRunningStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes the running status of the IGMP throttling to the switch.
A value of true(1) indicates the IGMP throttling mechanism is active.
A value of false(2) indicates the IGMP throttling mechanism is inactive."
::= { igmpSnoopThrottlePortEntry 2 }
igmpSnoopThrottlePortAction OBJECT-TYPE
SYNTAX INTEGER
{
replace(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action mode of the IGMP throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to the maximum number of IGMP groups that the interface can join.
A value of deny(2) means to deny the IGMP report request when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to the maximum number of IGMP groups that the interface can join."
DEFVAL { deny }
::= { igmpSnoopThrottlePortEntry 3 }
igmpSnoopThrottlePortMaxGroups OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of IGMP groups that the interface can join."
::= { igmpSnoopThrottlePortEntry 4 }
igmpSnoopThrottlePortCurrentGroups OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of IGMP groups that the interface has joined."
::= { igmpSnoopThrottlePortEntry 5}
--
-- The IpMgt Group
--
-- Management for Internet Protocol (IP).
netConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of netConfigEntry."
::= { ipMgt 1 }
netConfigEntry OBJECT-TYPE
SYNTAX NetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresponding interface."
INDEX { netConfigIfIndex, netConfigIPAddress, netConfigSubnetMask }
::= { netConfigTable 1 }
NetConfigEntry ::= SEQUENCE {
netConfigIfIndex Integer32,
netConfigIPAddress IpAddress,
netConfigSubnetMask IpAddress,
netConfigPrimaryInterface INTEGER,
netConfigUnnumbered INTEGER,
netConfigStatus RowStatus
}
netConfigIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table."
::= { netConfigEntry 1 }
netConfigIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { netConfigEntry 2 }
netConfigSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { netConfigEntry 3 }
netConfigPrimaryInterface OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether this is a primary interface."
::= { netConfigEntry 4 }
netConfigUnnumbered OBJECT-TYPE
SYNTAX INTEGER
{
unnumbered(1),
notUnnumbered(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether this is an unnumbered interface."
::= { netConfigEntry 5 }
netConfigStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { netConfigEntry 6 }
netDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address of the default gateway. If this value is
undefined or unknown, it shall have the value 0.0.0.0."
::= { ipMgt 2 }
ipHttpState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether HTTP is enabled."
::= { ipMgt 3 }
ipHttpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number for HTTP."
::= { ipMgt 4 }
ipDhcpRestart OBJECT-TYPE
SYNTAX INTEGER
{
restart(1),
noRestart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to restart(1) the DHCP server will restart. When read,
this value always returns noRestart(2)."
::= { ipMgt 5 }
-- optional
ipHttpsState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether HTTPS is enabled."
::= { ipMgt 6 }
ipHttpsPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number for HTTPS."
::= { ipMgt 7 }
--
-- vlanMgt
--
-- Management for Virtual Local Area Network (VLAN).
-- This has variables not already defined in the implemented
-- standard MIB(s).
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for VLAN configuration."
::= { vlanMgt 1 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for VLAN configuration."
INDEX { vlanIndex }
::= { vlanTable 1 }
VlanEntry ::= SEQUENCE
{
vlanIndex Unsigned32,
vlanAddressMethod INTEGER
}
vlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface."
::= { vlanEntry 1 }
vlanAddressMethod OBJECT-TYPE
SYNTAX INTEGER
{
user(1),
bootp(2),
dhcp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Method to get the IP address."
::= { vlanEntry 2 }
vlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in VLAN."
::= { vlanMgt 2 }
vlanPortEntry OBJECT-TYPE
SYNTAX VlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in VLAN."
INDEX { vlanPortIndex }
::= { vlanPortTable 1 }
VlanPortEntry ::= SEQUENCE
{
vlanPortIndex Integer32,
vlanPortMode INTEGER,
vlanPortDot1qEtherType Unsigned32,
vlanPortDot1qAddressMonitorMode EnabledStatus
}
vlanPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRIDGE-MIB."
::= { vlanPortEntry 1 }
vlanPortMode OBJECT-TYPE
SYNTAX INTEGER
{
hybrid(1),
dot1qTrunk(2),
dot1q-tunnel(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to dot1q-tunnel(4) sets a 802.1Q tunnel link."
::= { vlanPortEntry 2 }
vlanPortDot1qEtherType OBJECT-TYPE
SYNTAX Unsigned32 ('0000'h..'ffff'h)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "tpid for 802.1Q encapsulation. Used to select a nonstandard
(nondefault) 2-byte ethertype to identify 802.1Q tagged frames."
::= { vlanPortEntry 4 }
vlanPortDot1qAddressMonitorMode OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether address monitor for SBC mamnagment VLANs is enabled for this port."
::= { vlanPortEntry 5 }
vlanDot1qTunnelGlobalConfig OBJECT IDENTIFIER ::= { vlanMgt 7 }
vlanDot1qTunnelStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to globally enable/disable
802.1Q Tunneling on the device."
::= { vlanDot1qTunnelGlobalConfig 1 }
vlanDot1qTunnelPriorityMapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter is used globally to enable/disable
802.1Q tag priority which is inherited from the inner tag to the outer on the device."
::= { vlanDot1qTunnelGlobalConfig 2 }
--
-- vlanL2ProtocolTunnelPortTable
--
vlanL2ProtocolTunnelPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanL2ProtocolTunnelPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in Layer 2 Protocol
Tunneling."
::= { vlanMgt 16 }
vlanL2ProtocolTunnelPortEntry OBJECT-TYPE
SYNTAX VlanL2ProtocolTunnelPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in Layer 2 Protocol
Tunneling."
INDEX { vlanL2ptPortIndex }
::= { vlanL2ProtocolTunnelPortTable 1 }
VlanL2ProtocolTunnelPortEntry ::= SEQUENCE
{
vlanL2ptPortIndex Integer32,
vlanL2ptPortSta EnabledStatus,
vlanL2ptPortCdp EnabledStatus,
vlanL2ptPortVtp EnabledStatus,
vlanL2ptPortPvst EnabledStatus
}
vlanL2ptPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface
of the portTable. The interface identified by a particular
value of this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { vlanL2ProtocolTunnelPortEntry 1 }
vlanL2ptPortSta OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable Layer 2 protocol tunneling for
spanning-tree protocol. Set disabled(2) to disable Layer 2
protocol tunneling for spanning-tree protocol."
::= { vlanL2ProtocolTunnelPortEntry 2 }
vlanL2ptPortCdp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco Discovery Protocol. Set disabled(2) to disable
Layer 2 protocol tunneling for Cisco Discovery Protocol."
::= { vlanL2ProtocolTunnelPortEntry 4 }
vlanL2ptPortVtp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco VTP. Set disabled(2) to disable Layer 2 protocol
tunneling for Cisco VTP."
::= { vlanL2ProtocolTunnelPortEntry 5 }
vlanL2ptPortPvst OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco PVST+. Set disabled(2) to disable Layer 2 protocol
tunneling for Cisco PVST+."
::= { vlanL2ProtocolTunnelPortEntry 6 }
--
-- priorityMgt
--
-- Management for traffic priority. This allows a user
-- to specify which data packets have greater precedence
-- when traffic is buffered in the switch due to congestion.
prioIpPrecDscpStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
precedence(2),
dscp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Selects whether no frame priority mapping, IP ToS
precedence mapping or DSCP mapping is performed."
::= { priorityMgt 1 }
prioIpPrecTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioIpPrecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IP precedence priority mapping."
::= { priorityMgt 2 }
prioIpPrecEntry OBJECT-TYPE
SYNTAX PrioIpPrecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for IP precedence priority mapping."
INDEX { prioIpPrecPort, prioIpPrecValue }
::= { prioIpPrecTable 1 }
PrioIpPrecEntry ::= SEQUENCE
{
prioIpPrecPort Integer32,
prioIpPrecValue Integer32,
prioIpPrecCos Integer32
}
prioIpPrecPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port or the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { prioIpPrecEntry 2 }
prioIpPrecValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Value of IP ToS Precedence as specified in the packet
header."
::= { prioIpPrecEntry 3 }
prioIpPrecCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Class of Service (CoS) as defined by
dot1dTrafficClassPriority in the P-BRIDGE-MIB.
The IP ToS precedence value in the same
table row will be mapped to this CoS. This CoS is then
further mapped to the hardware queue according to
dot1dTrafficClassTable."
REFERENCE "P-BRIDGE-MIB.dot1dPriority.dot1dTrafficClassTable."
::= { prioIpPrecEntry 4 }
prioIpPrecRestoreDefault OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables the IP Precedence settings of a port to be restored
to their default values. To reset the settings of a port,
assign prioIpPrecRestoreDefault to the value of ifIndex
defined by the ifIndex in the IF-MIB. For example, if 1 is
written to it, then the IP priorities of port 1 will be
restored to default. When read, this object always returns 0."
::= { priorityMgt 3 }
prioIpDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioIpDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IP DSCP priority mapping."
::= { priorityMgt 4 }
prioIpDscpEntry OBJECT-TYPE
SYNTAX PrioIpDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for IP DSCP priority mapping."
INDEX { prioIpDscpPort, prioIpDscpValue }
::= { prioIpDscpTable 1 }
PrioIpDscpEntry ::= SEQUENCE
{
prioIpDscpPort Integer32,
prioIpDscpValue Integer32,
prioIpDscpCos Integer32
}
prioIpDscpPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { prioIpDscpEntry 1 }
prioIpDscpValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Value of IP DSCP as specified in the packet header."
::= { prioIpDscpEntry 2 }
prioIpDscpCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Class of Service as defined by dot1dTrafficClassPriority
in the P-BRIDGE-MIB. The prioIpDscpValue value in the same
table row will be mapped to this Class of Service (CoS).
This CoS is then further mapped to the hardware
queue according to dot1dTrafficClassTable."
REFERENCE "P-BRIDGE-MIB.dot1dPriority.dot1dTrafficClassTable."
::= { prioIpDscpEntry 3 }
prioIpDscpRestoreDefault OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables the IP DSCP settings of a port to be reset to their
defaults. To reset the IP DSCP settings of a port, assign
the value of the relevant ifIndex defined by the ifIndex in
the IF-MIB. For example, assigning the value 1 will result in
the IP DSCP settings of port 1 being restored to their default.
0 will always be obtained when reading this variable"
::= { priorityMgt 5 }
-- optional
prioIpPortEnableStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether IP Port priority look-up is enabled."
::= { priorityMgt 6 }
prioIpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioIpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IP port priority mapping."
::= { priorityMgt 7 }
prioIpPortEntry OBJECT-TYPE
SYNTAX PrioIpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for IP port priority mapping."
INDEX { prioIpPortPhysPort,prioIpPortValue }
::= { prioIpPortTable 1 }
PrioIpPortEntry ::= SEQUENCE
{
prioIpPortPhysPort Integer32,
prioIpPortValue Integer32,
prioIpPortCos Integer32,
prioIpPortStatus ValidStatus
}
prioIpPortPhysPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port or the trunk (excluding trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { prioIpPortEntry 1 }
prioIpPortValue OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP port for this value."
::= { prioIpPortEntry 2 }
prioIpPortCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Class of service for this entry."
::= { prioIpPortEntry 3 }
prioIpPortStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry."
::= { prioIpPortEntry 4 }
-- optional
prioCopy OBJECT IDENTIFIER ::= { priorityMgt 8 }
prioCopyIpPrec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action to copy IP Precedence settings from
a source port to many destination ports.
The first four octets represent an integer for
the source port in high-to-low (big-endian) order.
Starting from the 5th octet is the destination port list
in a form described by PortList in the Q-BRIDGE-MIB.
Writing this object will perform copy.
Reading this object will always get a zero-length
octet string."
::= { prioCopy 1 }
prioCopyIpDscp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action to copy IP DSCP settings from
a source port to many destination ports.
The first four octets represent an integer for
the source port in high-to-low (big-endian) order.
Starting from the 5th octet is the destination port list
in a form described by PortList in the Q-BRIDGE-MIB.
Writing this object will perform copy.
Reading this object will always get a zero-length
octet string."
::= { prioCopy 2 }
prioCopyIpPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action to copy IP Port settings from
a source port to many destination ports.
The first four octets represent an integer for
the source port in high-to-low (big-endian) order.
Starting from the 5th octet is the destination port list
in a form described by PortList in the Q-BRIDGE-MIB.
Writing this object will perform copy.
Reading this object will always get a zero-length
octet string."
::= { prioCopy 3 }
prioQueueMode OBJECT-TYPE
SYNTAX INTEGER {
wrr(1),
strict(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The global status for the prioQueue.
wrr(1),strict(2)"
::= { priorityMgt 10 }
--prioWrrPortTable
prioWrrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioWrrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for per port weighted round robin (WRR)."
::= { priorityMgt 12 }
prioWrrPortEntry OBJECT-TYPE
SYNTAX PrioWrrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for per port weighted round robin (WRR)."
INDEX { prioWrrPortIfIndex,prioWrrPortTrafficClass }
::= { prioWrrPortTable 1 }
PrioWrrPortEntry ::= SEQUENCE
{
prioWrrPortIfIndex Integer32,
prioWrrPortTrafficClass Integer32,
prioWrrPortWeight Integer32
}
prioWrrPortIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the prioWrrPortEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB."
::= { prioWrrPortEntry 1 }
prioWrrPortTrafficClass OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Traffic class for this entry, as defined in
dot1dTrafficClass in the P-BRIDGE-MIB. The actual
maximum depends on the hardware, and is
equal to dot1dPortNumTrafficClasses-1."
REFERENCE "MIB.IETF|Q-BRIDGE-MIB.dot1dTrafficClass."
::= { prioWrrPortEntry 2 }
prioWrrPortWeight OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Weight for this entry."
::= { prioWrrPortEntry 3 }
--
-- trapDestMgt
--
-- Management for SNMP traps and trap destinations.
trapDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrapDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of trap destination entries."
REFERENCE "RMON2-MIB, mib2(1).rmon(16).probeConfig(19).trapDestTable(13)."
::= { trapDestMgt 1 }
trapDestEntry OBJECT-TYPE
SYNTAX TrapDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap."
INDEX { trapDestAddress }
::= { trapDestTable 1 }
TrapDestEntry ::= SEQUENCE {
trapDestAddress IpAddress,
trapDestCommunity OCTET STRING,
trapDestStatus ValidStatus,
trapDestVersion INTEGER,
trapDestUdpPort Integer32
}
trapDestAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address to send traps."
::= { trapDestEntry 1 }
trapDestCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A community to which this destination address belongs."
::= { trapDestEntry 2 }
trapDestStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { trapDestEntry 3 }
trapDestVersion OBJECT-TYPE
SYNTAX INTEGER
{
version1(1),
version2(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Determines the version of the trap that is to be sent to the
trap receiver. If the value is 1, then an SNMP version 1 trap
is sent and if the value is 2, an SNMP version 2 trap is
sent."
::= { trapDestEntry 4}
trapDestUdpPort OBJECT-TYPE
SYNTAX Integer32 ( 1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Determines the UDP port number that the trap will be sent to."
DEFVAL { 162 }
::= { trapDestEntry 5}
-- trapVar is for binding variables for traps, there is no value when
-- no trap is sent.
trapVar OBJECT IDENTIFIER ::= { trapDestMgt 2 }
trapIpFilterRejectMode OBJECT-TYPE
SYNTAX INTEGER
{
web(1),
snmp(2),
telnet(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicated the ipfilter reject mode.
web(1),
snmp(2),
telnet(3)."
::= { trapVar 6 }
trapIpFilterRejectIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicating the IP address that rejected by the ipfilter."
::= { trapVar 7 }
--For Auto Upgrade
trapAutoUpgradeResult OBJECT-TYPE
SYNTAX INTEGER
{
succeeded(1),
failed(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The parameter indicates which result triggers the trap."
::= { trapVar 18 }
trapAutoUpgradeNewVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The parameter indicates new version which was upgraded to.
When trapAutoUpgradeResult was failed(2), it would be
null string."
::= { trapVar 19 }
-- For Port Security
trapPortSecurityIntrusionMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable indicates the intrusion MAC address."
::= { trapVar 29 }
--
-- AlarmMgt
--
alarmMgt OBJECT IDENTIFIER ::= { trapDestMgt 5 }
alarmMajorType OBJECT-TYPE
SYNTAX INTEGER
{
allFeLinkDown(1),
allGeLinkDown(2),
allFanFailure(3),
powerModuleFailure(4),
wrongPowerModuleSet(5),
thermalDetectorOverHeating(6),
fanFailure(7)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The parameter indicates which event triggers the trap."
::= { alarmMgt 1 }
alarmMajorStatus OBJECT-TYPE
SYNTAX BITS
{
allFeLinkDown(0),
allGeLinkDown(1),
allFanFailure(2),
powerModuleFail(3),
wrongPowerModuleSet(4),
thermalDetectorOverHeating(5),
fanFailure(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parameter indicates which event triggers the trap."
::= { alarmMgt 2 }
alarmMinorType OBJECT-TYPE
SYNTAX INTEGER
{
feLinkDown(1),
geLinkDown(2),
fanFailure(3),
thermalDetectorOverHeating(4),
thermalDetectorOverCooling(5),
powerSupplyUnitAMissing(6),
powerSupplyUnitBMissing(7)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The parameter indicates which event triggers the trap."
::= { alarmMgt 3 }
alarmMinorStatus OBJECT-TYPE
SYNTAX BITS
{
feLinkDown(0),
geLinkDown(1),
fanFailure(2),
thermalDetectorOverHeating(3),
thermalDetectorOverCooling(4),
powerSupplyUnitAMissing(5),
powerSupplyUnitBMissing(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parameter indicates which event triggers the trap."
::= { alarmMgt 4 }
alarmInputType OBJECT-TYPE
SYNTAX INTEGER
{
alarmInputType1(1),
alarmInputType2(2),
alarmInputType3(3),
alarmInputType4(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The parameter indicates which alarm input event triggers the trap."
::= { alarmMgt 7 }
alarmInputStatus OBJECT-TYPE
SYNTAX BITS
{
alarmInputType1(0),
alarmInputType2(1),
alarmInputType3(2),
alarmInputType4(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parameter indicates which event triggers the trap."
::= { alarmMgt 8 }
--
-- qosMgt
--
-- Management for Quality of Service (QoS) for network traffic.
--
-- rateLimitMgt
--
-- optional
rateLimitMgt OBJECT IDENTIFIER ::= { qosMgt 1 }
rateLimitPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RateLimitPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for rate limit of each port."
::= { rateLimitMgt 2 }
rateLimitPortEntry OBJECT-TYPE
SYNTAX RateLimitPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for rate limit of each port."
INDEX { rlPortIndex }
::= { rateLimitPortTable 1 }
RateLimitPortEntry ::= SEQUENCE
{
rlPortIndex Integer32,
rlPortInputStatus EnabledStatus,
rlPortOutputStatus EnabledStatus,
rlPortInputLimitInKilo Integer32,
rlPortOutputLimitInKilo Integer32
}
rlPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { rateLimitPortEntry 1 }
-- all need (both acd and non-acd)
rlPortInputStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether input rate limit is enabled for this port."
::= { rateLimitPortEntry 6 }
-- all need (both acd and non-acd)
rlPortOutputStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether output rate limit is enabled for this port."
::= { rateLimitPortEntry 7 }
rlPortInputLimitInKilo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the input rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.
For a 10 Gbps port, the range is 64 to 10000000."
::= { rateLimitPortEntry 10 }
rlPortOutputLimitInKilo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the output rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.
For a 10 Gbps port, the range is 64 to 10000000."
::= { rateLimitPortEntry 11 }
---------------------------
-- rateLimitCosPrioTable --
---------------------------
rateLimitCosPrioTable OBJECT-TYPE
SYNTAX SEQUENCE OF RateLimitCosPrioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for the rate limit, per port, per Class of Service priority."
::= { rateLimitMgt 5 }
rateLimitCosPrioEntry OBJECT-TYPE
SYNTAX RateLimitCosPrioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for the rate limit, per port, per Class of Service priority."
INDEX { rateLimitCosPrioIfIndex, rateLimitCosPrioValue}
::= { rateLimitCosPrioTable 1 }
RateLimitCosPrioEntry ::= SEQUENCE
{
rateLimitCosPrioIfIndex InterfaceIndex,
rateLimitCosPrioValue Unsigned32,
rateLimitCosPrioRateLimitValue Unsigned32
}
rateLimitCosPrioIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port that the rate limit function is performed."
::= { rateLimitCosPrioEntry 1 }
rateLimitCosPrioValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Class of Service priority value."
::= { rateLimitCosPrioEntry 2 }
rateLimitCosPrioRateLimitValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The rate limit value of the Class of Service priority. If the
value equals 0, it means that the rate limit function
is disabled."
::= { rateLimitCosPrioEntry 3 }
--
--markerMgt
--
markerMgt OBJECT IDENTIFIER ::= { qosMgt 2 }
markerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarkerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The marker table."
::= { markerMgt 1 }
markerEntry OBJECT-TYPE
SYNTAX MarkerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for marker table."
INDEX { markerIfIndex,markerAclName }
::= { markerTable 1 }
MarkerEntry ::= SEQUENCE
{
markerIfIndex Integer32,
markerAclName DisplayString,
markerActionBitList BITS,
markerDscp Integer32,
markerPrecedence Integer32,
markerPriority Integer32,
markerStatus RowStatus
}
markerIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface index of the marker table.
The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { markerEntry 1 }
markerAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of an ACL. Within a feature a unique
name is used to identify the list to which
the entry belongs in the device."
::= { markerEntry 2 }
markerActionBitList OBJECT-TYPE
SYNTAX BITS
{
dscp(0),
precedence(1),
priority(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The marker action bit list,
in right to left order.
for example:
0x3(11 in binary) means dscp(0) and precedence(1)
0x4(100 in binary) means priority(2)."
::= { markerEntry 3 }
markerDscp OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The DSCP value of the marker entry."
::= { markerEntry 4 }
markerPrecedence OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The precedence value of the marker entry."
::= { markerEntry 5 }
markerPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The priority value of the marker entry."
::= { markerEntry 6 }
markerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { markerEntry 7 }
cosMgt OBJECT IDENTIFIER ::= { qosMgt 3 }
--prioAclToCosMappingTable
prioAclToCosMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioAclToCosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for ACL to CoS Mapping."
::= { cosMgt 1 }
prioAclToCosMappingEntry OBJECT-TYPE
SYNTAX PrioAclToCosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for ACL to CoS Mapping."
INDEX { prioAclToCosMappingIfIndex, prioAclToCosMappingAclName }
::= { prioAclToCosMappingTable 1 }
PrioAclToCosMappingEntry ::= SEQUENCE
{
prioAclToCosMappingIfIndex Integer32,
prioAclToCosMappingAclName DisplayString,
prioAclToCosMappingCosValue Integer32,
prioAclToCosMappingStatus RowStatus
}
prioAclToCosMappingIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the prioAclToCosMappingEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB."
::= { prioAclToCosMappingEntry 1 }
prioAclToCosMappingAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of an IP ACL. Within a feature a unique name is
used to identify the list to which the entry belongs
in the device."
::= { prioAclToCosMappingEntry 2 }
prioAclToCosMappingCosValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "CoS value of the prioAclToCosMappingTable."
::= { prioAclToCosMappingEntry 3 }
prioAclToCosMappingStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { prioAclToCosMappingEntry 4 }
--
--diffServMgt
--
diffServMgt OBJECT IDENTIFIER ::= { qosMgt 4 }
--diffServClfrExtTable
diffServClfrExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServClfrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of diffServClfrExtEntry."
REFERENCE "DIFFSERV-MIB.diffServClfrTable"
::= { diffServMgt 1 }
diffServClfrExtEntry OBJECT-TYPE
SYNTAX DiffServClfrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServClfrExtTable."
AUGMENTS {diffServClfrEntry}
::= { diffServClfrExtTable 1 }
DiffServClfrExtEntry ::= SEQUENCE
{
diffServClfrExtName DisplayString,
diffServClfrExtDesc DisplayString
}
diffServClfrExtName OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The policy-map name."
::= { diffServClfrExtEntry 1 }
diffServClfrExtDesc OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The description of policy-map."
::= { diffServClfrExtEntry 2 }
--diffServClassMapNextFree
diffServClassMapNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an unused value for diffServClassMapId,
or a zero to indicate that none exist."
::= { diffServMgt 2 }
--diffServClassMapTable
diffServClassMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServClassMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of diffServClassMapEntry."
::= { diffServMgt 3 }
diffServClassMapEntry OBJECT-TYPE
SYNTAX DiffServClassMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServClassMapTable."
INDEX {diffServClassMapId}
::= { diffServClassMapTable 1 }
DiffServClassMapEntry ::= SEQUENCE
{
diffServClassMapId IndexInteger,
diffServClassMapName DisplayString,
diffServClassMapDesc DisplayString,
diffServClassMapType INTEGER,
diffServCalssMapStatus RowStatus
}
diffServClassMapId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that enumerates the Class Map entries.
Managers obtain new values for row creation in this table
by reading diffServClassMapNextFree."
::= { diffServClassMapEntry 1 }
diffServClassMapName OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The class-map name."
::= { diffServClassMapEntry 2 }
diffServClassMapDesc OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The description of class-map."
::= { diffServClassMapEntry 3 }
diffServClassMapType OBJECT-TYPE
SYNTAX INTEGER {
matchAll (1),
matchAny (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The class-map type."
::= { diffServClassMapEntry 4 }
diffServCalssMapStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServClassMapEntry 5 }
--diffServClassMapElementNextFree
diffServClassMapElementNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an unused value for diffServClassMapElementId,
or a zero to indicate that none exist."
::= { diffServMgt 4 }
--diffServClassMapElementTable
diffServClassMapElementTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServClassMapElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of diffServClassMapElementEntry."
::= { diffServMgt 5 }
diffServClassMapElementEntry OBJECT-TYPE
SYNTAX DiffServClassMapElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServClassMapElementTable."
INDEX {diffServClassMapId, diffServClassMapElementId}
::= { diffServClassMapElementTable 1 }
DiffServClassMapElementEntry ::= SEQUENCE
{
diffServClassMapElementId IndexInteger,
diffServClassMapElementSpecific RowPointer,
diffServClassMapElementStatus RowStatus
}
diffServClassMapElementId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that enumerates the Class Map Element entries.
Managers obtain new values for row creation in this table by
reading diffServClfrElementNextFree."
::= { diffServClassMapElementEntry 1 }
diffServClassMapElementSpecific OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A pointer to a valid entry in another table, filter table,
that describes the applicable classification parameters.
This RowPointer should point to an instance of one of:
diffServMultiFieldClfrEntry, diffServMultiFieldClfrExtEntry,
aclIpEntry, aclMacEntry."
::= { diffServClassMapElementEntry 2 }
diffServClassMapElementStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServClassMapElementEntry 3 }
--diffServMultiFieldClfrExtTable
diffServMultiFieldClfrExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServMultiFieldClfrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of diffServMultiFieldClfrExtEntry."
REFERENCE "DIFFSERV-MIB.diffServMultiFieldClfrTable"
::= { diffServMgt 6 }
diffServMultiFieldClfrExtEntry OBJECT-TYPE
SYNTAX DiffServMultiFieldClfrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServMultiFieldClfrExtTable."
AUGMENTS {diffServMultiFieldClfrEntry}
::= { diffServMultiFieldClfrExtTable 1 }
DiffServMultiFieldClfrExtEntry ::= SEQUENCE
{
diffServMultiFieldClfrExtType BITS,
diffServMultiFieldClfrExtVid VlanIndex,
diffServMultiFieldClfrExtIpPrecedence Integer32
}
diffServMultiFieldClfrExtType OBJECT-TYPE
SYNTAX BITS
{
dscp(0),
ipPrecedence(1),
vid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the current type of the multi filed entry. This is a
bit-map of possible conditions. The various bit
positions are:
0: dscp.
1: ipPrecedence.
2: vid"
::= { diffServMultiFieldClfrExtEntry 1 }
diffServMultiFieldClfrExtVid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN ID to match against the packet's VLAN ID."
REFERENCE "P-BRIDGE-MIB.VlanIndex."
::= { diffServMultiFieldClfrExtEntry 2 }
diffServMultiFieldClfrExtIpPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP precedence value to match against the packet's IP precedence value."
::= { diffServMultiFieldClfrExtEntry 3 }
--diffServToSMarkActTable
diffServToSMarkActTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServToSMarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of diffServToSMarkActEntry."
::= { diffServMgt 7 }
diffServToSMarkActEntry OBJECT-TYPE
SYNTAX DiffServToSMarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServToSMarkActTable."
INDEX { diffServToSMarkActToS }
::= { diffServToSMarkActTable 1 }
DiffServToSMarkActEntry ::= SEQUENCE
{
diffServToSMarkActToS Integer32
}
diffServToSMarkActToS OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ToS value referenced by a diffServActionSpecific attribute."
::= { diffServToSMarkActEntry 1 }
--diffServDot1pMarkActTable
diffServDot1pMarkActTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServDot1pMarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of diffServDot1pMarkActEntry."
::= { diffServMgt 8 }
diffServDot1pMarkActEntry OBJECT-TYPE
SYNTAX DiffServDot1pMarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServDot1pMarkActTable."
INDEX { diffServDot1pMarkActDot1p }
::= { diffServDot1pMarkActTable 1 }
DiffServDot1pMarkActEntry ::= SEQUENCE
{
diffServDot1pMarkActDot1p Integer32
}
diffServDot1pMarkActDot1p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Dot1p value referenced by a diffServActionSpecific attribute."
::= { diffServDot1pMarkActEntry 1 }
--
-- vlanBasedPrioMgt
--
vlanBasedPrioMgt OBJECT IDENTIFIER ::= { qosMgt 5 }
vlanBasedPrioTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanBasedPrioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for vlan based priority."
::= {vlanBasedPrioMgt 1}
vlanBasedPrioEntry OBJECT-TYPE
SYNTAX VlanBasedPrioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for vlan based priority."
INDEX {vlanBasedPrioIfindex, vlanBasedPrioVlanIndex}
::= {vlanBasedPrioTable 1}
VlanBasedPrioEntry ::= SEQUENCE
{
vlanBasedPrioIfindex InterfaceIndex,
vlanBasedPrioVlanIndex Integer32,
vlanBasedPrioPriority INTEGER,
vlanBasedPrioStatus ValidStatus
}
vlanBasedPrioIfindex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The specified port or trunk for vlan based priority."
::= { vlanBasedPrioEntry 1 }
vlanBasedPrioVlanIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The vlan which this port joins in."
::= { vlanBasedPrioEntry 2 }
vlanBasedPrioPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priority of the specified vlan traffic."
::= { vlanBasedPrioEntry 3 }
vlanBasedPrioStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of the vlan based entry. Valid(1) means the
entry is existent."
::= { vlanBasedPrioEntry 4 }
--
-- securityMgt
--
-- Management for security, e.g. user security and port security.
privateVlanMgt OBJECT IDENTIFIER ::= { securityMgt 1 }
portSecurityMgt OBJECT IDENTIFIER ::= { securityMgt 2 }
radiusMgt OBJECT IDENTIFIER ::= { securityMgt 4 }
tacacsMgt OBJECT IDENTIFIER ::= { securityMgt 5 }
sshMgt OBJECT IDENTIFIER ::= { securityMgt 6 }
aclMgt OBJECT IDENTIFIER ::= { securityMgt 7 }
ipFilterMgt OBJECT IDENTIFIER ::= { securityMgt 9 }
dot1xMgt OBJECT IDENTIFIER ::= { securityMgt 11}
aaaMgt OBJECT IDENTIFIER ::= { securityMgt 12}
--
-- PrivateVlanMgt
--
-- Management for Private VLAN.
--SYS_CPNT_PORT_TRAFFIC_SEGMENTATION(use SWCTRL api) start
privateVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This controls whether private VLAN is enabled."
::= { privateVlanMgt 1 }
privateVlanUplinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the list of uplink ports for private VLAN.
They should not overlap with privateVlanDownlinkPorts.
Only one port can be set, no multiple ports.
0 will be displayed if the privateVlanStatus is disabled.
You must enable the privateVlanStatus before setting this variable."
::= { privateVlanMgt 2 }
privateVlanDownlinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the list of downlink ports for private VLAN.
They should not overlap with privateVlanUplinkPorts.
Multiple port setting is permitted.
0 will be displayed if the privateVlanStatus is disabled.
You must enable the privateVlanStatus before setting this variable."
::= { privateVlanMgt 3 }
--SYS_CPNT_PORT_TRAFFIC_SEGMENTATION(use SWCTRL api) end
-- PortSecurityMgt
-- Management for Port Security. A secure port only allows
-- secure MAC addresses to come in.
portSecPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port security(MAC binding) Table."
::= { portSecurityMgt 1 }
portSecPortEntry OBJECT-TYPE
SYNTAX PortSecPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of portSecPortTable."
INDEX { portSecPortIndex }
::= { portSecPortTable 1 }
PortSecPortEntry ::= SEQUENCE
{
portSecPortIndex Integer32,
portSecPortStatus EnabledStatus,
portSecAction INTEGER,
portSecMaxMacCount Integer32
}
portSecPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { portSecPortEntry 1 }
portSecPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable port security and set disabled(2) to
disable port security."
::= { portSecPortEntry 2 }
portSecAction OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
trap(2),
shutdown(3),
trapAndShutdown(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will be sent,
when this variable is set to shutdown(3), the port will
shutdown, when this variable is set to
trapAndShutdown(4), a swPortSecurityTrap will be sent
and the port will shutdown."
::= { portSecPortEntry 3 }
portSecMaxMacCount OBJECT-TYPE
SYNTAX Integer32(0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the number of MAC has reached
this value, and only the secure MAC addresses can enter
this port. If the portSecPortStatus is disabled, we will begin
to learn the MAC, and auto enabled the portSecPortStatus when
the MAC has reached this value."
::= { portSecPortEntry 4 }
--
-- radiusMgt
--
-- Management for Remote Authentication Dial-In User Service (RADIUS).
--SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS=1: single server
--SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS>1: multiple server
radiusServerGlobalAuthPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Aauthentication port number for RADIUS server.
When specified radius server do not set
aauthentication port number, this value is used."
::= { radiusMgt 1 }
radiusServerGlobalAcctPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Accounting port number of RADIUS server.
When specified radius server do not set
accounting port number, this value is used."
::= { radiusMgt 2 }
radiusServerGlobalKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string.
When specified radius server do not set
key, this this value is used."
::= { radiusMgt 3 }
radiusServerGlobalRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Maximum number of retransmissions for RADIUS.
When specified radius server do not set
maximum number of retransmissions, this value is used."
::= { radiusMgt 4 }
radiusServerGlobalTimeout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for RADIUS.
When specified radius server do not set
timeout, this value is used."
::= { radiusMgt 5 }
--radiusServerTable
radiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for RADIUS server."
::= { radiusMgt 7 }
radiusServerEntry OBJECT-TYPE
SYNTAX RadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for radiusServerTable."
INDEX { radiusServerIndex }
::= { radiusServerTable 1 }
RadiusServerEntry ::= SEQUENCE
{
radiusServerIndex Integer32,
radiusServerAddress IpAddress,
radiusServerAuthPortNumber Integer32,
radiusServerAcctPortNumber Integer32,
radiusServerKey DisplayString,
radiusServerRetransmit Integer32,
radiusServerTimeout Integer32,
radiusServerStatus ValidStatus
}
radiusServerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The RADIUS server index in the table."
::= { radiusServerEntry 1 }
radiusServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP address of a RADIUS server."
::= { radiusServerEntry 2 }
radiusServerAuthPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Authentication port number of RADIUS server."
::= { radiusServerEntry 3 }
radiusServerAcctPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Accounting port number of RADIUS server."
::= { radiusServerEntry 4 }
radiusServerKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string."
::= { radiusServerEntry 5 }
radiusServerRetransmit OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for RADIUS."
::= { radiusServerEntry 6 }
radiusServerTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for RADIUS."
::= { radiusServerEntry 7 }
radiusServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { radiusServerEntry 8 }
--
-- tacacsMgt
--
-- Management for Terminal Access Controller Access Control System plus (TACACS+).
-- Global server setting
tacacsPlusServerGlobalPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP port number of TACACS+ server.
When specified TACACS+ server do not set
TCP port number, this this value is used."
::= { tacacsMgt 2 }
tacacsPlusServerGlobalKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This variable
can only be set. When this variable is read, it always returns a
zero-length string.When specified TACACS+ server do not set
the encryption key , this this value is used."
::= { tacacsMgt 3 }
tacacsPlusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TacacsPlusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for TACACS+ server."
::= { tacacsMgt 4 }
tacacsPlusServerEntry OBJECT-TYPE
SYNTAX TacacsPlusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for tacacsPlusServerTable."
INDEX { tacacsPlusServerIndex }
::= { tacacsPlusServerTable 1 }
TacacsPlusServerEntry ::= SEQUENCE
{
tacacsPlusServerIndex Integer32,
tacacsPlusServerAddress IpAddress,
tacacsPlusServerPortNumber Integer32,
tacacsPlusServerKey DisplayString,
tacacsPlusServerStatus ValidStatus,
tacacsPlusServerRetransmit Integer32,
tacacsPlusServerTimeout Integer32
}
tacacsPlusServerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "TACACS+ server index."
::= { tacacsPlusServerEntry 1 }
tacacsPlusServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP address of a TACACS+ server."
::= { tacacsPlusServerEntry 2 }
tacacsPlusServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "TCP port number of a TACACS+ server."
::= { tacacsPlusServerEntry 3 }
tacacsPlusServerKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This
variable can only be set. When this variable is read, it always
returns a zero-length string."
::= { tacacsPlusServerEntry 4 }
tacacsPlusServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { tacacsPlusServerEntry 8 }
tacacsPlusServerRetransmit OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The maximum number of retransmissions for TACACS+."
::= { tacacsPlusServerEntry 9 }
tacacsPlusServerTimeout OBJECT-TYPE
SYNTAX Integer32 (1..540)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Timeout for TACACS+."
::= { tacacsPlusServerEntry 10 }
tacacsPlusServerGlobalRetransmit OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of retransmissions for TACACS+ global server."
::= { tacacsMgt 5 }
tacacsPlusServerGlobalTimeout OBJECT-TYPE
SYNTAX Integer32 (1..540)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Timeout for TACACS+ global server."
::= { tacacsMgt 6 }
--
-- sshMgt
--
-- Management for Secure Shell Configuration
sshServerStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of Secure Shell Server. Set this value to
enabled(1) to enable SSH server, set this value to
disabled(2) to disable the SSH server."
::= { sshMgt 1 }
sshServerMajorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The major version of the SSH Server."
::= { sshMgt 2 }
sshServerMinorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minor version of the SSH Server."
::= { sshMgt 3 }
sshTimeout OBJECT-TYPE
SYNTAX INTEGER(1..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time interval that the router waits for the SSH
client to respond. The range is 1-120."
::= { sshMgt 4 }
sshAuthRetries OBJECT-TYPE
SYNTAX INTEGER(1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of attempts after which the interface is reset.
The range is 1-5."
::= { sshMgt 5 }
sshConnInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshConnInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for Secure Shell Connection."
::= { sshMgt 6 }
sshConnInfoEntry OBJECT-TYPE
SYNTAX SshConnInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for sshConnInfoTable."
INDEX { sshConnID }
::= { sshConnInfoTable 1 }
SshConnInfoEntry ::= SEQUENCE
{
--both sshv1 & sshv2 start
sshConnID Integer32,
sshConnMajorVersion Integer32,
sshConnMinorVersion Integer32,
sshConnStatus INTEGER,
--both sshv1 & sshv2 end
--both sshv1 & sshv2 start
sshConnUserName DisplayString,
sshDisconnect INTEGER,
--both sshv1 & sshv2 end
--sshv2 only start
sshConnEncryptionTypeStr DisplayString
--sshv2 only end
}
--both sshv1 & sshv2 start
sshConnID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The connection ID of the Secure Shell Connection."
::= { sshConnInfoEntry 1 }
sshConnMajorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH major version."
::= { sshConnInfoEntry 2 }
sshConnMinorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH minor version."
::= { sshConnInfoEntry 3 }
sshConnStatus OBJECT-TYPE
SYNTAX INTEGER
{
negotiationStart(1),
authenticationStart(2),
sessionStart(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH connection State. negotiationStart(1) means the
SSH is in its negotiation start state, authenticationStart(2)
means the SSH is in authentication start state, sessionStart(3)
means the SSH is in session start State."
::= { sshConnInfoEntry 5 }
--both sshv1 & sshv2 end
sshConnUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The user name of the connection."
::= { sshConnInfoEntry 6 }
sshDisconnect OBJECT-TYPE
SYNTAX INTEGER
{
noDisconnect(1),
disconnect(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the variable to disconnect the connection,
noDisconnect(1) will always be obtained when reading this variable."
::= { sshConnInfoEntry 7 }
--both sshv1 & sshv2 end
--sshv2 only start
sshConnEncryptionTypeStr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The encryption type of the SSH."
::= { sshConnInfoEntry 8 }
sshKeySize OBJECT-TYPE
SYNTAX INTEGER(512..896)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SSH server key size."
::= { sshMgt 7 }
sshRsaHostKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 1."
::= { sshMgt 8 }
sshRsaHostKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 2."
::= { sshMgt 9 }
sshRsaHostKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 3."
::= { sshMgt 10 }
sshRsaHostKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 4."
::= { sshMgt 11 }
sshRsaHostKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 5."
::= { sshMgt 12 }
sshRsaHostKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 6."
::= { sshMgt 13 }
sshRsaHostKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 7."
::= { sshMgt 14 }
sshRsaHostKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 8."
::= { sshMgt 15 }
sshDsaHostKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 1."
::= { sshMgt 16 }
sshDsaHostKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 2."
::= { sshMgt 17 }
sshDsaHostKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 3."
::= { sshMgt 18 }
sshDsaHostKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 4."
::= { sshMgt 19 }
sshDsaHostKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 5."
::= { sshMgt 20 }
sshDsaHostKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 6."
::= { sshMgt 21 }
sshDsaHostKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 7."
::= { sshMgt 22 }
sshDsaHostKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 8."
::= { sshMgt 23 }
sshHostKeyGenAction OBJECT-TYPE
SYNTAX INTEGER
{
noGen(1),
genRsaKey(2),
genDsaKey(3),
genBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable is for host key generating.
For the set behavior:
Set it to genRsaKey(2) to generate the RSA host key,
and to genDsaKey(3) to generate the DSA host key,
if genBothKeys(4) is set, both RSA and DSA host key are
generated.
For the get behavior:
You will get genRsaKey(2), genDsaKey(3) or
genBothKeys(4) when the key gen action is in progress.
otherwise, you will get noGen(1)."
::= { sshMgt 24 }
sshHostKeyGenStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
success(2),
failure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of the last KeyGen status.
if no key gen action has been performed.
you will get unknown(1) status."
::= { sshMgt 25 }
sshHostKeySaveAction OBJECT-TYPE
SYNTAX INTEGER
{
noSave(1),
save(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To save host key from memory to flash.
For the set behavior:
Set it to save(2) to perform the save operation.
For the get behavior:
You will get save(1) when the save action is in progress.
Otherwise, you will get noSave(1)."
::= { sshMgt 26 }
sshHostKeySaveStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
success(2),
failure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of the last savekey status.
If no save action has been performed,
you will get unknown(1) status."
::= { sshMgt 27 }
sshHostKeyDelAction OBJECT-TYPE
SYNTAX INTEGER
{
noDel(1),
delRsaKey(2),
delDsaKey(3),
delBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete the host key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA host key,
to delDsaKey(3) to delete the DSA host key,
or to delBothKeys(4) to delete both RSA and DSA host key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1)."
::= { sshMgt 28 }
sshUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of sshUserEntry."
::= { sshMgt 29 }
sshUserEntry OBJECT-TYPE
SYNTAX SshUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for sshUserTable."
INDEX { IMPLIED sshUserName}
::= { sshUserTable 1 }
SshUserEntry ::= SEQUENCE
{
sshUserName DisplayString,
sshUserRsaKey1 KeySegment,
sshUserRsaKey2 KeySegment,
sshUserRsaKey3 KeySegment,
sshUserRsaKey4 KeySegment,
sshUserRsaKey5 KeySegment,
sshUserRsaKey6 KeySegment,
sshUserRsaKey7 KeySegment,
sshUserRsaKey8 KeySegment,
sshUserDsaKey1 KeySegment,
sshUserDsaKey2 KeySegment,
sshUserDsaKey3 KeySegment,
sshUserDsaKey4 KeySegment,
sshUserDsaKey5 KeySegment,
sshUserDsaKey6 KeySegment,
sshUserDsaKey7 KeySegment,
sshUserDsaKey8 KeySegment,
sshUserKeyDelAction INTEGER
}
sshUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "User Name."
::= { sshUserEntry 1 }
sshUserRsaKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 1."
::= { sshUserEntry 2 }
sshUserRsaKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 2."
::= { sshUserEntry 3 }
sshUserRsaKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 3."
::= { sshUserEntry 4 }
sshUserRsaKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 4."
::= { sshUserEntry 5 }
sshUserRsaKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 5."
::= { sshUserEntry 6 }
sshUserRsaKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 6."
::= { sshUserEntry 7 }
sshUserRsaKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 7."
::= { sshUserEntry 8 }
sshUserRsaKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 8."
::= { sshUserEntry 9 }
sshUserDsaKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 1."
::= { sshUserEntry 10 }
sshUserDsaKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 2."
::= { sshUserEntry 11 }
sshUserDsaKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 3."
::= { sshUserEntry 12 }
sshUserDsaKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 4."
::= { sshUserEntry 13 }
sshUserDsaKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 5."
::= { sshUserEntry 14 }
sshUserDsaKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 6."
::= { sshUserEntry 15 }
sshUserDsaKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 7."
::= { sshUserEntry 16 }
sshUserDsaKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 8."
::= { sshUserEntry 17 }
sshUserKeyDelAction OBJECT-TYPE
SYNTAX INTEGER
{
noDel(1),
delRsaKey(2),
delDsaKey(3),
delBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete the user key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key,
to delDsaKey(3) to delete the DSA user key,
or to delBothKeys(4) to delete both RSA and DSA user key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1)."
::= { sshUserEntry 18 }
--
-- aclMgt
--
--aclIpAceTable
aclIpAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of aclIpAceEntry."
::= { aclMgt 1 }
aclIpAceEntry OBJECT-TYPE
SYNTAX AclIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclIpAceTable."
INDEX { aclIpAceName, aclIpAceIndex }
::= { aclIpAceTable 1 }
AclIpAceEntry ::= SEQUENCE
{
aclIpAceName DisplayString,
aclIpAceIndex Integer32,
aclIpAcePrecedence Integer32,
aclIpAceAction INTEGER,
aclIpAceSourceIpAddr IpAddress,
aclIpAceSourceIpAddrBitmask IpAddress,
aclIpAceDestIpAddr IpAddress,
aclIpAceDestIpAddrBitmask IpAddress,
aclIpAceProtocol Integer32,
aclIpAcePrec Integer32,
aclIpAceTos Integer32,
aclIpAceDscp Integer32,
aclIpAceSourcePortOp INTEGER,
aclIpAceMinSourcePort Integer32,
aclIpAceMaxSourcePort Integer32,
aclIpAceSourcePortBitmask Integer32,
aclIpAceDestPortOp INTEGER,
aclIpAceMinDestPort Integer32,
aclIpAceMaxDestPort Integer32,
aclIpAceDestPortBitmask Integer32,
aclIpAceControlCode Integer32,
aclIpAceControlCodeBitmask Integer32,
aclIpAceStatus RowStatus
}
aclIpAceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of an ACL. Within a feature a unique
name is used to identify
the list to which the entry belongs in the device."
::= { aclIpAceEntry 1 }
aclIpAceIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of an ACE within an ACL."
::= { aclIpAceEntry 2 }
aclIpAcePrecedence OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the IP precedence value to be matched against.
This object cannot not be configured when the status of the
entry, aclIpAceStatus, is active(1)."
::= { aclIpAceEntry 3 }
aclIpAceAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches this ACE.
This object cannot not be configured when the status of the
entry, aclIpAceStatus, is active(1)."
::= { aclIpAceEntry 4 }
aclIpAceSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source IP address. The packet's source address is
AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1)."
::= { aclIpAceEntry 5 }
aclIpAceSourceIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source IP address mask. The packet's destination
address is AND-ed with the value of aclIpAceSourceIpAddr and then
compared against the value of this object."
::= { aclIpAceEntry 6 }
aclIpAceDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address.
The packet's destination address is
AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared
against the value of this object."
::= { aclIpAceEntry 7 }
aclIpAceDestIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address mask."
::= { aclIpAceEntry 8 }
aclIpAceProtocol OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
value of 0 matches every IP packet. The object=256, means 'any'
For example :
0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation,
6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH,
88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP,
103 is PIMv2, 108 is PCP. "
::= { aclIpAceEntry 9 }
aclIpAcePrec OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the IP precedence value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAcePrec object is 8."
::= { aclIpAceEntry 10 }
aclIpAceTos OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the IP ToS facility value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAcePrec object is 9."
::= { aclIpAceEntry 11 }
aclIpAceDscp OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the DSCP value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAcePrec object is 64."
::= { aclIpAceEntry 12 }
aclIpAceSourcePortOp OBJECT-TYPE
SYNTAX INTEGER
{
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's source TCP/UDP port number is
to be compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number."
::= { aclIpAceEntry 13 }
aclIpAceMinSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceSourcePortOp is range(3),
this indicates the lower bound of the TCP/UDP port number value range."
::= { aclIpAceEntry 14 }
aclIpAceMaxSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceSourcePortOp is range(3),
this indicates the upper bound of the TCP/UDP port number value range."
::= { aclIpAceEntry 15 }
aclIpAceSourcePortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceSourcePortOp is equal(2),
this indicates the bitmask of the aclIpAceMinSourcePort."
::= { aclIpAceEntry 16 }
aclIpAceDestPortOp OBJECT-TYPE
SYNTAX INTEGER
{
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value, means that no
comparison is to be made with the destination TCP/UDP port
number."
::= { aclIpAceEntry 17 }
aclIpAceMinDestPort OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceDestPortOp is range(3),
this indicates the lower bound of the TCP/UDP port number value range."
::= { aclIpAceEntry 18 }
aclIpAceMaxDestPort OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceDestPortOp is range(3),
this indicates the upper bound of the TCP/UDP port number value range."
::= { aclIpAceEntry 19 }
aclIpAceDestPortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceDestPortOp is equal(2),
this indicates the bitmask of the aclIpAceMinDestPort."
::= { aclIpAceEntry 20 }
aclIpAceControlCode OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how the control flags of TCP packets are to be compared.
aceIpControlCode is AND-ed with aceIpControlCodeBitmask."
::= { aclIpAceEntry 21 }
aclIpAceControlCodeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how the control flags of TCP packets are to be compared.
It can be used to check multiple flags of the
FIN, SYN, RST, PSH, ACK, URG by the sum of
FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32."
::= { aclIpAceEntry 22 }
aclIpAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclIpAceEntry 23 }
-- aclMacAceTable
aclMacAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclMacAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of aclMacAceEntry."
::= { aclMgt 2 }
aclMacAceEntry OBJECT-TYPE
SYNTAX AclMacAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclMacAceTable. "
INDEX { aclMacAceName, aclMacAceIndex }
::= { aclMacAceTable 1 }
AclMacAceEntry ::= SEQUENCE
{
aclMacAceName DisplayString,
aclMacAceIndex Integer32,
aclMacAcePrecedence Integer32,
aclMacAceAction INTEGER,
aclMacAcePktformat INTEGER,
aclMacAceSourceMacAddr OCTET STRING,
aclMacAceSourceMacAddrBitmask OCTET STRING,
aclMacAceDestMacAddr OCTET STRING,
aclMacAceDestMacAddrBitmask OCTET STRING,
aclMacAceVidOp INTEGER,
aclMacAceMinVid Integer32,
aclMacAceVidBitmask Integer32,
aclMacAceEtherTypeOp INTEGER,
aclMacAceEtherTypeBitmask Integer32,
aclMacAceMinEtherType Integer32,
aclMacAceStatus RowStatus
}
aclMacAceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of an ACL. Within a feature, a unique
name is used to identify
the list to which the entry belongs in the device."
::= { aclMacAceEntry 1 }
aclMacAceIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of an ACE within an ACL."
::= { aclMacAceEntry 2 }
aclMacAcePrecedence OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the entry's precedence."
::= { aclMacAceEntry 3 }
aclMacAceAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches this ACE.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 4 }
aclMacAcePktformat OBJECT-TYPE
SYNTAX INTEGER
{
any(1),
untagged-Eth2(2),
untagged802Dot3(3),
tagggedEth2(4),
tagged802Dot3(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to check the packet format of the packets.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 5 }
aclMacAceSourceMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address.
The specified source MAC of the packet The packet's source MAC
address is AND-ed with the value of aceMacSourceMacAddrBitmask
and then compared against the value of this object. This object
cannot be configured when the status of the entry,
aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 6 }
aclMacAceSourceMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source MAC address mask.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 7 }
aclMacAceDestMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is
AND-ed with the value of aceMacDestMacAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 8 }
aclMacAceDestMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination MAC address mask.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 9 }
aclMacAceVidOp OBJECT-TYPE
SYNTAX INTEGER
{
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's vid is
to be compared.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 10 }
aclMacAceMinVid OBJECT-TYPE
SYNTAX Integer32 (1..4093)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the lower bound of the vid value range if the aclMacAceVidOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 11 }
aclMacAceVidBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'0FFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bitmask of vid if the aclMacAceVidOp is equal, default value is 0xfff."
::= { aclMacAceEntry 12 }
aclMacAceEtherTypeOp OBJECT-TYPE
SYNTAX INTEGER
{
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's ethertype is
to be compared.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 14 }
aclMacAceEtherTypeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bitmask of vid if the aclMacAceVidOp is equal(2) , default value is 0xFFFF."
::= { aclMacAceEntry 15 }
aclMacAceMinEtherType OBJECT-TYPE
SYNTAX Integer32 ('0600'h..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the lower bound of the vid value range if the aclMacAceEtherTypeOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 16 }
aclMacAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclMacAceEntry 18 }
--aclAclGroupTable
aclAclGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclAclGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of aclAclGroupEntry."
::= { aclMgt 3 }
aclAclGroupEntry OBJECT-TYPE
SYNTAX AclAclGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclAclGroupTable."
INDEX { aclAclGroupIfIndex }
::= { aclAclGroupTable 1 }
AclAclGroupEntry ::= SEQUENCE
{
aclAclGroupIfIndex Integer32,
aclAclGroupIngressIpAcl DisplayString,
aclAclGroupEgressIpAcl DisplayString,
aclAclGroupIngressMacAcl DisplayString,
aclAclGroupEgressMacAcl DisplayString
}
aclAclGroupIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface number specifying the ACL binding to."
::= { aclAclGroupEntry 1 }
aclAclGroupIngressIpAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the ingress IP ACL(standard or extended) binding to the interface."
::= { aclAclGroupEntry 2 }
aclAclGroupEgressIpAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the egress IP ACL(standard or extended) binding to the interface."
::= { aclAclGroupEntry 3 }
aclAclGroupIngressMacAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the ingress MAC ACL binding to the interface."
::= { aclAclGroupEntry 4 }
aclAclGroupEgressMacAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the egress MAC ACL binding to the interface."
::= { aclAclGroupEntry 5 }
--aclIngressIpMaskTable
aclIngressIpMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIngressIpMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of aclIngressIpMaskEntry."
::= { aclMgt 4 }
aclIngressIpMaskEntry OBJECT-TYPE
SYNTAX AclIngressIpMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclIngressIpMaskTable."
INDEX { aclIngressIpMaskIndex }
::= { aclIngressIpMaskTable 1 }
AclIngressIpMaskEntry ::= SEQUENCE
{
aclIngressIpMaskIndex Integer32,
aclIngressIpMaskPrecedence Integer32,
aclIngressIpMaskIsEnableTos EnabledStatus,
aclIngressIpMaskIsEnableDscp EnabledStatus,
aclIngressIpMaskIsEnablePrecedence EnabledStatus,
aclIngressIpMaskIsEnableProtocol EnabledStatus,
aclIngressIpMaskSourceIpAddrBitmask Unsigned32,
aclIngressIpMaskDestIpAddrBitmask Unsigned32,
aclIngressIpMaskSourcePortBitmask Integer32,
aclIngressIpMaskDestPortBitmask Integer32,
aclIngressIpMaskControlCodeBitmask Integer32,
aclIngressIpMaskStatus RowStatus
}
aclIngressIpMaskIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the bitmask of the source IP address. The relative
bitmask must be created before the ACE binds to the interface.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 1 }
aclIngressIpMaskPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether to check the IP precedence against the packets,
The relative bitmask must be created before the
ACE binds to the interface in ingress direction.
This object cannot be configured
when the status of the entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 2 }
aclIngressIpMaskIsEnableTos OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP ToS facility against the packets,
The relative bitmask must be created before the
ACE binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 3 }
aclIngressIpMaskIsEnableDscp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP DSCP against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 4 }
aclIngressIpMaskIsEnablePrecedence OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP precednce against the packets.
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 5 }
aclIngressIpMaskIsEnableProtocol OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP protocol against the packets.
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 6 }
aclIngressIpMaskSourceIpAddrBitmask OBJECT-TYPE
SYNTAX Unsigned32 (0..'FFFFFFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source IP bitmask to check against the packets,
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 7 }
aclIngressIpMaskDestIpAddrBitmask OBJECT-TYPE
SYNTAX Unsigned32 (0..'FFFFFFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination IP bitmask to check against the packets,
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 8 }
aclIngressIpMaskSourcePortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source port bitmask to check against the TCP/UDP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 9 }
aclIngressIpMaskDestPortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination port bitmask to check against the TCP/UDP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 10 }
aclIngressIpMaskControlCodeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the control code bitmask to check against the TCP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 11 }
aclIngressIpMaskStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclIngressIpMaskEntry 12 }
--aclEgressIpMaskTable
aclEgressIpMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclEgressIpMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of aclEgressIpMaskEntry."
::= { aclMgt 5 }
aclEgressIpMaskEntry OBJECT-TYPE
SYNTAX AclEgressIpMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclEgressIpMaskTable."
INDEX { aclEgressIpMaskIndex }
::= { aclEgressIpMaskTable 1 }
AclEgressIpMaskEntry ::= SEQUENCE
{
aclEgressIpMaskIndex Integer32,
aclEgressIpMaskPrecedence Integer32,
aclEgressIpMaskIsEnableTos EnabledStatus,
aclEgressIpMaskIsEnableDscp EnabledStatus,
aclEgressIpMaskIsEnablePrecedence EnabledStatus,
aclEgressIpMaskIsEnableProtocol EnabledStatus,
aclEgressIpMaskSourceIpAddrBitmask Unsigned32,
aclEgressIpMaskDestIpAddrBitmask Unsigned32,
aclEgressIpMaskSourcePortBitmask Integer32,
aclEgressIpMaskDestPortBitmask Integer32,
aclEgressIpMaskControlCodeBitmask Integer32,
aclEgressIpMaskStatus RowStatus
}
aclEgressIpMaskIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a mask entry within a mask table."
::= { aclEgressIpMaskEntry 1 }
aclEgressIpMaskPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The created precedence of an mask entry within the mask table."
::= { aclEgressIpMaskEntry 2 }
aclEgressIpMaskIsEnableTos OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP ToS facility against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 3 }
aclEgressIpMaskIsEnableDscp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP DSCP against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 4 }
aclEgressIpMaskIsEnablePrecedence OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP precedence against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 5 }
aclEgressIpMaskIsEnableProtocol OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP protocol against the packets.
The relative bitmask must be created before the ACE binds to
the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 6 }
aclEgressIpMaskSourceIpAddrBitmask OBJECT-TYPE
SYNTAX Unsigned32 (0..'FFFFFFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source IP bitmask to check against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 7 }
aclEgressIpMaskDestIpAddrBitmask OBJECT-TYPE
SYNTAX Unsigned32 (0..'FFFFFFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination IP bitmask to check against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 8 }
aclEgressIpMaskSourcePortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source port bitmask to check against the TCP/UDP packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 9 }
aclEgressIpMaskDestPortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination port bitmask to check against the TCP/UDP packets.
The relative bitmask must be created before
the ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 10 }
aclEgressIpMaskControlCodeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the control code bitmask to check against the TCP packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 11 }
aclEgressIpMaskStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclEgressIpMaskEntry 12 }
--aclIngressMacMaskTable
aclIngressMacMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIngressMacMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of aclIngressMacMaskEntry."
::= { aclMgt 6 }
aclIngressMacMaskEntry OBJECT-TYPE
SYNTAX AclIngressMacMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclIngressMacMaskTable."
INDEX { aclIngressMacMaskIndex }
::= { aclIngressMacMaskTable 1 }
AclIngressMacMaskEntry ::= SEQUENCE
{
aclIngressMacMaskIndex Integer32,
aclIngressMacMaskPrecedence Integer32,
aclIngressMacMaskSourceMacAddrBitmask OCTET STRING,
aclIngressMacMaskDestMacAddrBitmask OCTET STRING,
aclIngressMacMaskVidBitmask Integer32,
aclIngressMacMaskEtherTypeBitmask Integer32,
aclIngressMacMaskIsEnablePktformat EnabledStatus,
aclIngressMacMaskStatus RowStatus
}
aclIngressMacMaskIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of an mask entry within an ingress mask table."
::= { aclIngressMacMaskEntry 1 }
aclIngressMacMaskPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The created order of an mask entry within an ingress mask table."
::= { aclIngressMacMaskEntry 2 }
aclIngressMacMaskSourceMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source MAC bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressMacMaskStatus, is active(1)."
::= { aclIngressMacMaskEntry 3 }
aclIngressMacMaskDestMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination MAC bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressMacMaskStatus, is active(1)."
::= { aclIngressMacMaskEntry 4 }
aclIngressMacMaskVidBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'0FFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the vid bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressMacMaskStatus, is active(1)."
::= { aclIngressMacMaskEntry 5 }
aclIngressMacMaskEtherTypeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the ethertype bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressMacMaskStatus, is active(1)."
::= { aclIngressMacMaskEntry 6 }
aclIngressMacMaskIsEnablePktformat OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the packet format against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressMacMaskStatus, is active(1)."
::= { aclIngressMacMaskEntry 7 }
aclIngressMacMaskStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclIngressMacMaskEntry 8 }
--aclEgressMacMaskTable
aclEgressMacMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclEgressMacMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of aclEgressMacMaskEntry."
::= { aclMgt 7 }
aclEgressMacMaskEntry OBJECT-TYPE
SYNTAX AclEgressMacMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclEgressMacMaskTable."
INDEX { aclEgressMacMaskIndex }
::= { aclEgressMacMaskTable 1 }
AclEgressMacMaskEntry ::= SEQUENCE
{
aclEgressMacMaskIndex Integer32,
aclEgressMacMaskPrecedence Integer32,
aclEgressMacMaskSourceMacAddrBitmask OCTET STRING,
aclEgressMacMaskDestMacAddrBitmask OCTET STRING,
aclEgressMacMaskVidBitmask Integer32,
aclEgressMacMaskEtherTypeBitmask Integer32,
aclEgressMacMaskIsEnablePktformat EnabledStatus,
aclEgressMacMaskStatus RowStatus
}
aclEgressMacMaskIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a mask entry within an egress mask table."
::= { aclEgressMacMaskEntry 1 }
aclEgressMacMaskPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The created precedence of a mask entry within an egress mask table."
::= { aclEgressMacMaskEntry 2 }
aclEgressMacMaskSourceMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source MAC bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclEgressMacMaskStatus, is active(1)."
::= { aclEgressMacMaskEntry 3 }
aclEgressMacMaskDestMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination MAC bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclEgressMacMaskStatus, is active(1)."
::= { aclEgressMacMaskEntry 4 }
aclEgressMacMaskVidBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'0FFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the vid bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclEgressMacMaskStatus, is active(1)."
::= { aclEgressMacMaskEntry 5 }
aclEgressMacMaskEtherTypeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the ethertype bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclEgressMacMaskStatus, is active(1)."
::= { aclEgressMacMaskEntry 6 }
aclEgressMacMaskIsEnablePktformat OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the packet format against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclEgressMacMaskStatus, is active(1)."
::= { aclEgressMacMaskEntry 7 }
aclEgressMacMaskStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclEgressMacMaskEntry 8 }
--aclIpTable
aclIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of aclIpEntry."
::= { aclMgt 8 }
aclIpEntry OBJECT-TYPE
SYNTAX AclIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclIpTable."
INDEX { aclIpAclName }
::= { aclIpTable 1 }
AclIpEntry ::= SEQUENCE
{
aclIpAclName DisplayString
}
aclIpAclName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of an ACL. Within a feature, a unique
name is used to identify
the list to which the entry belongs in the device."
::= { aclIpEntry 1 }
--aclMacTable
aclMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of aclMacEntry."
::= { aclMgt 9 }
aclMacEntry OBJECT-TYPE
SYNTAX AclMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclMacTable."
INDEX { aclMacAclName }
::= { aclMacTable 1 }
AclMacEntry ::= SEQUENCE
{
aclMacAclName DisplayString
}
aclMacAclName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of an ACL. Within a feature, a unique
name is used to identify
the list to which the entry belongs in the device."
::= { aclMacEntry 1 }
--
-- aclArpAceTable
--
aclArpAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclArpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of aclArpAceEntry."
::= { aclMgt 10 }
aclArpAceEntry OBJECT-TYPE
SYNTAX AclArpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclArpAceTable."
INDEX { aclArpAceName, aclArpAceIndex }
::= { aclArpAceTable 1 }
AclArpAceEntry ::= SEQUENCE
{
aclArpAceName DisplayString,
aclArpAceIndex Integer32,
aclArpAcePrecedence Integer32,
aclArpAceAction INTEGER,
aclArpAcePktType INTEGER,
aclArpAceSourceIpAddr IpAddress,
aclArpAceSourceIpAddrBitmask IpAddress,
aclArpAceDestIpAddr IpAddress,
aclArpAceDestIpAddrBitmask IpAddress,
aclArpAceSourceMacAddr OCTET STRING,
aclArpAceSourceMacAddrBitmask OCTET STRING,
aclArpAceDestMacAddr OCTET STRING,
aclArpAceDestMacAddrBitmask OCTET STRING,
aclArpAceLogStatus EnabledStatus,
aclArpAceStatus RowStatus
}
aclArpAceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of an ACL. Within a feature a unique name
is used to identify the list to which the entry
belongs in the device."
::= { aclArpAceEntry 1 }
aclArpAceIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of an ACE within an ACL."
::= { aclArpAceEntry 2 }
aclArpAcePrecedence OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the ARP precedence value to be matched.
This object cannot not be configured when the status of
the entry, aclArpAceStatus, is active(1)."
::= { aclArpAceEntry 3 }
aclArpAceAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches
this ACE. This object cannot not be configured when
the status of the entry, aclArpAceStatus, is active(1)."
::= { aclArpAceEntry 4 }
aclArpAcePktType OBJECT-TYPE
SYNTAX INTEGER
{
request(1),
response(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the packet type to be taken if a packet matches
this ACE. This object can not be configured when the
status of the entry, aclArpAceStatus, is active(1)."
::= { aclArpAceEntry 5 }
aclArpAceSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source ARP address. The packet's source
address is AND'ed with the value of
aclArpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the status of the
entry, aclArpAceStatus, is active(1)."
::= { aclArpAceEntry 6 }
aclArpAceSourceIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source ARP address mask. The packet's
destination address is AND'ed with the value of
aclArpAceSourceIpAddr and then compared against the
value of this object."
::= { aclArpAceEntry 7 }
aclArpAceDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address. The packet's
destination address is AND'ed with the value of
aclArpAceDestIpAddrBitmask and then compared
against the value of this object."
::= { aclArpAceEntry 8 }
aclArpAceDestIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address mask."
::= { aclArpAceEntry 9 }
aclArpAceSourceMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address. The
specified source MAC of the packet. The packet's
source MAC address is AND'ed with the value of
aceArpSourceMacAddrBitmask and then compared against
the value of this object. This object cannot be
configured when the status of the entry, aclArpAceStatus,
is active(1)."
::= { aclArpAceEntry 10 }
aclArpAceSourceMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source MAC address mask.
This object cannot be configured when the status of the
entry, aclArpAceStatus, is active(1)."
::= { aclArpAceEntry 11 }
aclArpAceDestMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is AND'ed with the
value of aceArpDestMacAddrBitmask and then compared
against the value of this object. This object cannot be
configured when the status of the entry, aclArpAceStatus,
is active(1)."
::= { aclArpAceEntry 12 }
aclArpAceDestMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination MAC address mask.
This object cannot be configured when the status of the
entry, aclArpAceStatus, is active(1)."
::= { aclArpAceEntry 13 }
aclArpAceLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to log messages against the packets.
This object cannot be configured when the status of the
entry, aclArpAceStatus, is active(1)."
::= { aclArpAceEntry 14 }
aclArpAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclArpAceEntry 15 }
--
-- aclArpTable
--
aclArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of aclArpEntry."
::= { aclMgt 11 }
aclArpEntry OBJECT-TYPE
SYNTAX AclArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclArpTable."
INDEX { aclArpAclName }
::= { aclArpTable 1 }
AclArpEntry ::= SEQUENCE
{
aclArpAclName DisplayString
}
aclArpAclName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of an ACL. Within a feature, a unique name is
used to identify the list to which the entry belongs
in the device."
::= { aclArpEntry 1 }
--
-- ipFilterMgt
--
--ipFilterSnmpTable
ipFilterSnmpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterSnmpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 1 }
ipFilterSnmpEntry OBJECT-TYPE
SYNTAX IpFilterSnmpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow to connect to this device through SNMP."
INDEX { ipFilterSnmpStartAddress }
::= { ipFilterSnmpTable 1 }
IpFilterSnmpEntry ::= SEQUENCE {
ipFilterSnmpStartAddress IpAddress,
ipFilterSnmpEndAddress IpAddress,
ipFilterSnmpStatus ValidStatus
}
ipFilterSnmpStartAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterSnmpEntry 1 }
ipFilterSnmpEndAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterSnmpEntry 2 }
ipFilterSnmpStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterSnmpEntry 3 }
--ipFilterHTTPTable
ipFilterHTTPTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterHTTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 2 }
ipFilterHTTPEntry OBJECT-TYPE
SYNTAX IpFilterHTTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow to connect to this device through HTTP."
INDEX { ipFilterHTTPStartAddress }
::= { ipFilterHTTPTable 1 }
IpFilterHTTPEntry ::= SEQUENCE {
ipFilterHTTPStartAddress IpAddress,
ipFilterHTTPEndAddress IpAddress,
ipFilterHTTPStatus ValidStatus
}
ipFilterHTTPStartAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterHTTPEntry 1 }
ipFilterHTTPEndAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterHTTPEntry 2 }
ipFilterHTTPStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterHTTPEntry 3 }
--ipFilterTelnetTable
ipFilterTelnetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterTelnetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 3 }
ipFilterTelnetEntry OBJECT-TYPE
SYNTAX IpFilterTelnetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow them to connect to this device through Telnet."
INDEX { ipFilterTelnetStartAddress }
::= { ipFilterTelnetTable 1 }
IpFilterTelnetEntry ::= SEQUENCE {
ipFilterTelnetStartAddress IpAddress,
ipFilterTelnetEndAddress IpAddress,
ipFilterTelnetStatus ValidStatus
}
ipFilterTelnetStartAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterTelnetEntry 1 }
ipFilterTelnetEndAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterTelnetEntry 2 }
ipFilterTelnetStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterTelnetEntry 3 }
--
-- dot1xMgt
--
-- The extension table of dot1xAuthConfigTable
dot1xAuthConfigExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xAuthConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table of dot1xAuthConfigTable."
::= { dot1xMgt 1 }
dot1xAuthConfigExtEntry OBJECT-TYPE
SYNTAX Dot1xAuthConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of dot1xAuthConfigExtTable."
AUGMENTS { dot1xAuthConfigEntry }
::= { dot1xAuthConfigExtTable 1 }
Dot1xAuthConfigExtEntry ::= SEQUENCE
{
dot1xAuthConfigExtOperMode INTEGER,
dot1xAuthConfigExtMultiHostMaxCnt Integer32
}
dot1xAuthConfigExtOperMode OBJECT-TYPE
SYNTAX INTEGER
{
singleHost(1),
multiHost(2),
macBasedAuth(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The operation mode of dot1x port which allows host
connection to 802.1x-authorized ports."
::= { dot1xAuthConfigExtEntry 1 }
dot1xAuthConfigExtMultiHostMaxCnt OBJECT-TYPE
SYNTAX Integer32(1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of hosts when the
dot1xAuthConfigExtOperMode is multiHost(2). When the
operation Mode is singleHost(1), we can ignore this
variables."
DEFVAL { 5 }
::= { dot1xAuthConfigExtEntry 2 }
--
-- aaaMgt
--
aaaMethodTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the settings needed for accounting."
::= { aaaMgt 1 }
aaaMethodEntry OBJECT-TYPE
SYNTAX AaaMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the aaaMethodTable."
INDEX { aaaMethodIndex }
::= { aaaMethodTable 1 }
AaaMethodEntry ::= SEQUENCE {
aaaMethodIndex Integer32,
aaaMethodName DisplayString,
aaaMethodGroupName DisplayString,
aaaMethodMode INTEGER,
aaaMethodStatus ValidStatus,
aaaMethodClientType INTEGER
}
aaaMethodIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the index for the entry."
::= { aaaMethodEntry 1 }
aaaMethodName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name for the method."
::= { aaaMethodEntry 2 }
aaaMethodGroupName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name for the server to use, pointing to aaaRadiusGroupName
or aaaTacacsPlusGroupName."
::= { aaaMethodEntry 3 }
aaaMethodMode OBJECT-TYPE
SYNTAX INTEGER
{
start-stop(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "start-stop(1),sends a 'start' accounting notice at the beginning of a process and
a 'stop' accounting notice at the end of a process. The 'start' accounting record
is sent in the background. The requested user process begins regardless of whether or not
the 'start' accounting notice was received by the accounting server."
::= { aaaMethodEntry 4 }
aaaMethodStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaMethodTable, 2 to destroy the table."
::= { aaaMethodEntry 5 }
aaaMethodClientType OBJECT-TYPE
SYNTAX INTEGER
{
dot1x(1), exec(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "dot1x(1): Provides accounting service for 802.1x activity;
exec(2): Provides accounting service for EXEC connection
such as Telnet, SSH or console; commands(3): Provides
accounting service for command privileges."
::= { aaaMethodEntry 6 }
aaaRadiusGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaRadiusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Uses a subset of RADIUS servers for accounting as defined by the server group"
::= { aaaMgt 2 }
aaaRadiusGroupEntry OBJECT-TYPE
SYNTAX AaaRadiusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaRadiusGroupEntry."
INDEX { aaaRadiusGroupIndex }
::= { aaaRadiusGroupTable 1 }
AaaRadiusGroupEntry ::= SEQUENCE
{
aaaRadiusGroupIndex Integer32,
aaaRadiusGroupServerBitMap OCTET STRING,
aaaRadiusGroupName DisplayString,
aaaRadiusGroupStatus ValidStatus
}
aaaRadiusGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the index for the entry."
::= { aaaRadiusGroupEntry 1 }
aaaRadiusGroupServerBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Identifies which RADIUS sever to use, each bit points to each radius server.
80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2."
::= { aaaRadiusGroupEntry 2 }
aaaRadiusGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Uses a subset of servers for accounting as
defined by the server group. The same name as aaaTacasPlusGroupName is not allowed."
::= { aaaRadiusGroupEntry 3 }
aaaRadiusGroupStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
::= { aaaRadiusGroupEntry 4 }
aaaTacacsPlusGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaTacacsPlusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Uses a subset of TACACS+ servers for accounting as defined by the server group"
::= { aaaMgt 3 }
aaaTacacsPlusGroupEntry OBJECT-TYPE
SYNTAX AaaTacacsPlusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaTacacsPlusGroupEntry."
INDEX { aaaTacacsPlusGroupIndex }
::= { aaaTacacsPlusGroupTable 1 }
AaaTacacsPlusGroupEntry ::= SEQUENCE
{
aaaTacacsPlusGroupIndex Integer32,
aaaTacacsPlusGroupServerBitMap OCTET STRING,
aaaTacacsPlusGroupName DisplayString,
aaaTacacsPlusGroupStatus ValidStatus
}
aaaTacacsPlusGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the index for the entry."
::= { aaaTacacsPlusGroupEntry 1 }
aaaTacacsPlusGroupServerBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Identifies which TACACS+ sever to use."
::= { aaaTacacsPlusGroupEntry 2 }
aaaTacacsPlusGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Uses a subset of servers for accounting as
defined by the server group. We can't have the same name as aaaRadiusGroupName"
::= { aaaTacacsPlusGroupEntry 3 }
aaaTacacsPlusGroupStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
::= { aaaTacacsPlusGroupEntry 4 }
aaaUpdate OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the periodic interim accounting records to be sent
to the accounting server and periodic intervals to send accounting update records(in minutes)."
::= { aaaMgt 4 }
aaaAccountTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies an interface or a set of interfaces that the
accounting method list will be applied to."
::= { aaaMgt 5 }
aaaAccountEntry OBJECT-TYPE
SYNTAX AaaAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaAccountTable."
INDEX { aaaAccountIfIndex }
::= { aaaAccountTable 1 }
AaaAccountEntry ::= SEQUENCE {
aaaAccountIfIndex Integer32,
aaaAccountMethodName DisplayString,
aaaAccountProtocol INTEGER,
aaaAccountStatus ValidStatus
}
aaaAccountIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Defined as the ifIndex"
::= { aaaAccountEntry 1 }
aaaAccountMethodName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default."
::= { aaaAccountEntry 2 }
aaaAccountProtocol OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use."
::= { aaaAccountEntry 3 }
aaaAccountStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
::= { aaaAccountEntry 4 }
aaaAccExecTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaAccExecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies an interface or a set of interfaces that the
accounting method list will be applied to."
::= { aaaMgt 9 }
aaaAccExecEntry OBJECT-TYPE
SYNTAX AaaAccExecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaAccExecTable."
INDEX { aaaAccExecIndex }
::= { aaaAccExecTable 1 }
AaaAccExecEntry ::= SEQUENCE {
aaaAccExecIndex INTEGER,
aaaAccExecMethodName DisplayString
}
aaaAccExecIndex OBJECT-TYPE
SYNTAX INTEGER
{
console(1), vty(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The method of accessing CLI management."
::= { aaaAccExecEntry 1 }
aaaAccExecMethodName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default."
::= { aaaAccExecEntry 2 }
--
--
-- sysLogMgt
--
-- Management for system log. This configures the logging
-- of events inside the switch.
sysLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether the system log is enabled."
::= { sysLogMgt 1 }
sysLogHistoryFlashLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for logging to flash."
::= { sysLogMgt 2 }
sysLogHistoryRamLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for logging to RAM."
::= { sysLogMgt 3 }
--
--remoteLogMgt
--
remoteLogMgt OBJECT IDENTIFIER ::= { sysLogMgt 6 }
remoteLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether the remote log system is enabled."
::= { remoteLogMgt 1 }
remoteLogLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for remote log."
::= { remoteLogMgt 2 }
remoteLogFacilityType OBJECT-TYPE
SYNTAX INTEGER
{
localUse0(16),
localUse1(17),
localUse2(18),
localUse3(19),
localUse4(20),
localUse5(21),
localUse6(22),
localUse7(23)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " The facility type for remote log."
::= { remoteLogMgt 3 }
--remoteLogServerTable
remoteLogServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteLogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A Table for storing the remote log Server list."
::= { remoteLogMgt 4 }
remoteLogServerEntry OBJECT-TYPE
SYNTAX RemoteLogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptually row for remoteLogServerTable."
INDEX { remoteLogServerIp }
::= { remoteLogServerTable 1 }
RemoteLogServerEntry ::= SEQUENCE
{
remoteLogServerIp IpAddress,
remoteLogServerStatus ValidStatus
}
remoteLogServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of the remote log Server."
::= { remoteLogServerEntry 1 }
remoteLogServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { remoteLogServerEntry 2 }
--
--smtpMgt
--
smtpMgt OBJECT IDENTIFIER ::= { sysLogMgt 7 }
smtpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the SMTP, set disabled(2) to disable
the SMTP."
::= { smtpMgt 1 }
smtpSeverityLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the SMTP minimum severity level to send the event message."
::= { smtpMgt 2 }
smtpSourceEMail OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..41))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMTP source email address,
the sender's mail address that appears
in the 'From' field of the mail."
::= { smtpMgt 3 }
--smtpServerIpTable
smtpServerIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmtpServerIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The SMTP server IP table.
The maximum servers to be added is 3."
::= { smtpMgt 4 }
smtpServerIpEntry OBJECT-TYPE
SYNTAX SmtpServerIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the smtpServerIpTable."
INDEX { smtpServerIp }
::= { smtpServerIpTable 1 }
SmtpServerIpEntry ::= SEQUENCE
{
smtpServerIp IpAddress,
smtpServerIpStatus ValidStatus
}
smtpServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "SMTP mail server's IP address."
::= { smtpServerIpEntry 1 }
smtpServerIpStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { smtpServerIpEntry 2 }
--smtpDestEMailTable
smtpDestEMailTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmtpDestEMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5."
::= { smtpMgt 5}
smtpDestEMailEntry OBJECT-TYPE
SYNTAX SmtpDestEMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the smtpDestEMailTable."
INDEX { smtpDestEMail }
::= { smtpDestEMailTable 1 }
SmtpDestEMailEntry ::= SEQUENCE
{
smtpDestEMail DisplayString,
smtpDestEMailStatus ValidStatus
}
smtpDestEMail OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..41))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "SMTP destination e-mail address."
::= { smtpDestEMailEntry 1 }
smtpDestEMailStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { smtpDestEMailEntry 2 }
--
-- lineMgt
--
-- Management for line. This includes management for
-- serial line (RS232 port) and Telnet.
consoleMgt OBJECT IDENTIFIER ::= { lineMgt 1 }
telnetMgt OBJECT IDENTIFIER ::= { lineMgt 2 }
--consoleMgt
consoleDataBits OBJECT-TYPE
SYNTAX INTEGER
{
databits7(1),
databits8(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of data bits."
::= { consoleMgt 1 }
consoleParity OBJECT-TYPE
SYNTAX INTEGER
{
partyNone(1),
partyEven(2),
partyOdd(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the generation of a parity bit."
::= { consoleMgt 2 }
consoleStopBits OBJECT-TYPE
SYNTAX INTEGER
{
stopbits1(1),
stopbits2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The console stop bits, valid values are stopbits1(1) or stopbits2(2)"
::= { consoleMgt 4 }
consoleExecTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "In a serial console, use the consoleExecTimeout
variable to set the interval that the EXEC command
interpreter waits until user input is detected;
set the value to 0 to disable it."
::= { consoleMgt 5 }
consolePasswordThreshold OBJECT-TYPE
SYNTAX Integer32 (0..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of failed console logon attempts that may be
made before the system will not accept a further attempt
in the time specified by consoleSilentTime. A value of 0
disables the functionality."
::= { consoleMgt 6 }
consoleSilentTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The length of time that the management console is
inaccessible after the number of failed logon
attempts has reached consolePasswordThreshold. A value
of 0 disables the functionality."
::= { consoleMgt 7 }
consoleAdminBaudRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Baud rate. Valid values are 2400, 4800, 9600,
19200, 38400, 57600, 115200.
Setting this variable to 0 means autobaud.
Please read the actual baud rate in the consoleOperBaudRate variable."
::= { consoleMgt 8 }
consoleOperBaudRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The baud rate currently in use."
::= { consoleMgt 9 }
--to set login timeout seconds
consoleLoginResponseTimeout OBJECT-TYPE
SYNTAX Integer32(0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Console login response timeout setting.
Valid range is 0 to 300. Setting to 0 means disabled."
::= { consoleMgt 10 }
-- telnetMgt
telnetExecTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the interval that the system waits for user input
before terminating the current telnet session."
::= { telnetMgt 1 }
telnetPasswordThreshold OBJECT-TYPE
SYNTAX Integer32 (0..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of failed telnet logon attempts that may be made
before the system will not accept a further attempt to logon
with telnet."
::= { telnetMgt 2 }
--to set login timeout seconds
telnetLoginResponseTimeout OBJECT-TYPE
SYNTAX Integer32(1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Telnet login response timeout setting.
Valid range is 1 to 300.
This timout setting cannot be disbled."
::= { telnetMgt 3 }
telnetStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable or disable the telnet function.
Any new telnet request will be rejected and all current telnet sessions will be
terminated if this status is set to disabled(2)."
DEFVAL { enabled }
::= { telnetMgt 4 }
telnetPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The telnet session port number."
DEFVAL { 23 }
::= { telnetMgt 5 }
--
-- sysTimeMgt
--
sntpMgt OBJECT IDENTIFIER ::= { sysTimeMgt 1 }
ntpMgt OBJECT IDENTIFIER ::= { sysTimeMgt 5 }
sntpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the SNTP, set disabled(2) to disable
the SNTP."
::= { sntpMgt 1 }
sntpServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
unicast(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Service mode."
::= { sntpMgt 2 }
sntpPollInterval OBJECT-TYPE
SYNTAX Integer32(16..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Polling interval."
::= { sntpMgt 3 }
sntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for SNTP servers"
::= { sntpMgt 4 }
sntpServerEntry OBJECT-TYPE
SYNTAX SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for SNTP servers."
INDEX { sntpServerIndex }
::= { sntpServerTable 1 }
SntpServerEntry ::= SEQUENCE
{
sntpServerIndex Integer32,
sntpServerIpAddress IpAddress
}
sntpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a server. This table has fixed size."
::= { sntpServerEntry 1 }
sntpServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index are 0."
::= { sntpServerEntry 2 }
sysCurrentTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a text string in the following form, based on Unix:
'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters
of the English name of the month. '_d' is the day of month.
A single-digit day is preceded by a space. 'hh:mm:ss' is
a 24-hour representations of hours, minutes, and seconds.
A single-digit hour is preceded by a zero. 'yyyy' is a
four-digit year. An example is: 'Jan 1 02:03:04 2002'."
::= { sysTimeMgt 2 }
sysTimeZone OBJECT-TYPE
SYNTAX DisplayString(SIZE(6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a text string in the following form: '[s]hh:mm'.
'[s]' is a plus-or-minus sign. For UTC, this is omitted.
For a positive offset, this is '+'. For a negative offset,
this is '-'. 'hh:mm' in the hour and minute offset from UTC.
A single-digit hour is preceded by a zero."
::= { sysTimeMgt 3 }
sysTimeZoneName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the time zone."
::= { sysTimeMgt 4 }
ntpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the NTP, set disabled(2) to disable
the NTP."
::= { ntpMgt 1 }
ntpServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
unicast(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Service mode."
::= { ntpMgt 2 }
ntpAuthenticateStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the NTP Authenticate, set disabled(2) to
disable the NTP."
::= { ntpMgt 4 }
ntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for NTP servers"
::= { ntpMgt 5 }
ntpServerEntry OBJECT-TYPE
SYNTAX NtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for NTP servers."
INDEX { ntpServerIpAddress }
::= { ntpServerTable 1 }
NtpServerEntry ::= SEQUENCE
{
ntpServerIpAddress IpAddress,
ntpServerVersion Integer32,
ntpServerKeyId Integer32,
ntpServerStatus INTEGER
}
ntpServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index is 0."
::= { ntpServerEntry 1 }
ntpServerVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP version."
::= { ntpServerEntry 2 }
ntpServerKeyId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for a NTP server. This variable can only be written."
::= { ntpServerEntry 3 }
ntpServerStatus OBJECT-TYPE
SYNTAX INTEGER
{
create(1),
active(2),
destroy(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'create', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row."
::= { ntpServerEntry 4 }
ntpAuthKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpAuthKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for NTP Authentication keys"
::= { ntpMgt 6 }
ntpAuthKeyEntry OBJECT-TYPE
SYNTAX NtpAuthKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for NTP Authentication keys."
INDEX { ntpAuthKeyId }
::= { ntpAuthKeyTable 1 }
NtpAuthKeyEntry::= SEQUENCE
{
ntpAuthKeyId Integer32,
ntpAuthKeyWord OCTET STRING,
ntpAuthKeyStatus INTEGER
}
ntpAuthKeyId OBJECT-TYPE
SYNTAX Integer32 (1..65536)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a Authentication key. This table has fixed size."
::= { ntpAuthKeyEntry 1 }
ntpAuthKeyWord OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Authentication key word is used to created a key by the MD5
And the max length is 32."
::= { ntpAuthKeyEntry 2 }
ntpAuthKeyStatus OBJECT-TYPE
SYNTAX INTEGER
{
create(1),
active(2),
destroy(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'create', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row."
::= { ntpAuthKeyEntry 3 }
--
-- fileMgt
--
-- Management for File System Manipulate, including files copy, display and delete.
fileCopyMgt OBJECT IDENTIFIER ::= { fileMgt 1 }
fileAutoUpgradeMgt OBJECT IDENTIFIER ::= { fileMgt 4 }
--
-- This performs the copy operation.
--
fileCopySrcOperType OBJECT-TYPE
SYNTAX INTEGER
{
file(1),
runningCfg(2),
startUpCfg(3),
tftp(4),
unit(5),
ftp(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Copy Operation that we want to perform on the
fileCopyDestOperType, this operation is similar to the CLI
command 'copy fileCopySrcOperType fileCopyDestOperType'.
file(1) means we want to perform the 'copy file fileCopyDestType'
operation, runningCfg(2) means we want to perform the
'copy running-config fileCopyDestOperType' operation,
startUpCfg(3) means we want to perform the
'copy startup-config fileCopyDestOperType' operation, tftp(4) means
we want to perform the 'copy tftp fileCopyDestOperType' operation,
unit(5) is only available in stacking systems, in which we
can copy files from one unit to another unit and it means
we want to perform the 'copy unit fileCopyDestOperType' operation.
http(6) means we can read the status of the transfer via
HTTP protocol, but can not change the status.
ftp(7) means we want to perform 'copy ftp fileCopyDestOperType'
operation.
The possible permutations are as follows: (1) copy file file;
(2) copy file runningCfg; (3) copy file startUpCfg;
(4) copy file tftp; (5) copy file unit (for stacking systems only);
(6) copy runningCfg file; (7) copy runningCfg startUpCfg;
(8) copy runningCfg tftp; (9) copy startupCfg file;
(10) copy startupCfg runningCfg; (11) copy startupCfg tftp;
(12) copy tftp file; (13) copy tftp runningCfg;
(14) copy tftp startUpCfg; (15) copy unit file;
(16) copy file ftp; (17) copy running-config ftp;
(18) copy startup-config ftp; (19) copy ftp file;
(20) copy ftp running-config; (21) copy ftp startup-config;
(22) copy tftp cluster-member; (23) copy tftp oam-remote."
::= { fileCopyMgt 1}
fileCopySrcFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..56))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source file name for fileCopyMgt when a copy
operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopySrcOperType is runningCfg(2) or startUpCfg(3),
this variable can be ignored."
::= { fileCopyMgt 2 }
fileCopyDestOperType OBJECT-TYPE
SYNTAX INTEGER
{
file(1),
runningCfg(2),
startUpCfg(3),
tftp(4),
unit(5),
oamRemote(9),
ftp(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Copy Operation that we want to perform on
fileCopySrcOperType, this operation is similar to the CLI
command 'copy fileCopySrcOperType fileCopyDestOperType'.
file(1) means we want to perform the 'copy fileCopySrcType file '
operation, runningCfg(2) means we want to perform the
'copy fileCopySrcOperType running-config ' operation,
startUpCfg(3) means we want to perform the
'copy fileCopySrcOperType startup-config ' operation, tftp(4) means
we want to perform the 'copy fileCopySrcOperType tftp' operation,
unit(5) is only available in stacking systems in which we
can copy files from one unit to another unit. It means
we want to perform the 'copy fileCopySrcOperType unit' operation.
http(6) means we can read the status of the transfer via
HTTP protocol, but can not change the status.
ftp(7) means we want to perform 'copy fileCopySrcOperType ftp'
operation, clusterMember(8) means we want to perform
'copy fileCopySrcOperType cluster-member' operation,
oamRemote(9) means we want to perform
'copy fileCopySrcOperType oam-remote' operation,
The possible permutations are as follows: (1) copy file file;
(2) copy file runningCfg; (3) copy file startUpCfg;
(4) copy file tftp; (5) copy file unit (for stacking system only);
(6) copy runningCfg file; (7) copy runningCfg startUpCfg;
(8) copy runningCfg tftp; (9) copy startupCfg file;
(10) copy startupCfg runningCfg; (11) copy startupCfg tftp;
(12) copy tftp file; (13) copy tftp runningCfg;
(14) copy tftp startUpCfg; (15) copy unit file;
(16) copy file ftp; (17) copy running-config ftp;
(18) copy startup-config ftp; (19) copy ftp file;
(20) copy ftp running-config; (21) copy ftp startup-config;
(22) copy tftp cluster-member; (23) copy tftp oam-remote."
::= { fileCopyMgt 3 }
fileCopyDestFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination file name for fileCopyMgt when a
copy operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopyDestOperType is runningCfg(2), startupCfg(3), or
oamRemote(9), this variable can be ignored."
::= { fileCopyMgt 4 }
fileCopyFileType OBJECT-TYPE
SYNTAX INTEGER {
opcode(1),
config(2),
bootRom(3),
oamRemoteFirmware(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of file to copy in fileCopyMgt. If the fileCopySrcOperType or
fileCopyDestOperType is either runningCfg(2) or startupCfg(3), this
variable can be ignored. If the fileCopySrcOperType or
fileCopyDestOperType is unit(5), this variable cannot be set to
bootRom(3). If the fileCopyDestOperType is oamRemote(9), this variable
should be oamRemoteFirmware(4)."
::= { fileCopyMgt 5 }
fileCopyTftpServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the TFTP server for transfer
when a download is next requested via this MIB.
This value is set to '0.0.0.0' when no IP address has been
specified. If neither fileCopySrcOperType nor fileCopyDestOperType
is tftp(4), this variable can be ignored."
::= { fileCopyMgt 6 }
fileCopyUnitId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the switch unit for stackable devices.
When performing the 'copy unit file' or 'copy file unit' action,
if neither fileCopySrcOperType nor fileCopyDestOperType
is unit(5), this variable can be ignored."
::= { fileCopyMgt 7 }
fileCopyAction OBJECT-TYPE
SYNTAX INTEGER
{
notCopying(1),
copy(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to copy(2) to begin the copy Operation."
::= { fileCopyMgt 8 }
fileCopyStatus OBJECT-TYPE
SYNTAX FileCopyStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last copy procedure, if any. This object will
have a value of fileCopyUnknown(18) if no copy operation has been
performed. If the fileCopyDestOperType is oamRemote(9), refer the
detail results to fileCopyEfmOamResultTable."
::= { fileCopyMgt 9 }
fileCopyOam OBJECT IDENTIFIER ::= { fileCopyMgt 15 }
fileCopyOamPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port list which ports on the bitmap perform remote
firmware upgrade. Note: If the fileCopyDestOperType is not
oamRemote(9), this variable can be ignored."
::= { fileCopyOam 1 }
fileCopyOamResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileCopyOamResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for OAM remote firmware upgrade result."
::= { fileCopyOam 2 }
fileCopyOamResultEntry OBJECT-TYPE
SYNTAX FileCopyOamResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A result entry for OAM remote firmware upgrade."
INDEX { fileCopyOamLocalIfIndex }
::= { fileCopyOamResultTable 1 }
FileCopyOamResultEntry ::= SEQUENCE
{
fileCopyOamLocalIfIndex InterfaceIndex,
fileCopyOamResult INTEGER
}
fileCopyOamLocalIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port excluding trunk. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB."
::= { fileCopyOamResultEntry 1 }
fileCopyOamResult OBJECT-TYPE
SYNTAX INTEGER
{
oamSuccess(1),
oamStatusUnknown(2),
oamTransmissionTerminated(3),
oamTerminatedByPeer(4),
oamTimeout(5),
oamResourceNotAvailable(6),
oamFileFormatNotSupported(7),
oamChecksumError(8),
oamWriteFlashError(9),
oamLinkDown(10),
oamUpgradeFailed(11),
oamDownloadFailed(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the last firmware upgrade procedure. This
object will have a value of oamStatusUnknown(2) if no
firmware upgrade operation has been performed.
The oamSuccess(1) indicates that the remote firmware
upgrade is success. The oamTransmissionTerminated(3)
indicates that the transmission is terminated by local device.
The oamTerminatedByPeer(4) indicates that the transmission
is terminated by peer. The oamTimeout(5) indicates that the
acknowledge or packets is not received from the peer. The
oamResouceNotAvailable(6) indicates that the resource is
not available to do firmware upgrade. The
oamFileFormatNotSupported(7) indicates that the file format
is not accepted by remote device. The oamChecksumError(8)
indicates that the checksum is wrong. The
oamWriteFlashError(9) indicates that it is failed to write
the firmware to flash. The oamLinkDown(10) indicates that
the OAM link is disconnected. The oamUpgradeFailed(11)
indicates that the upgrade result is failed. The
oamDownloadFailed(12) indicates that download firmware from
TFTP server is failed."
::= { fileCopyOamResultEntry 2 }
fileCopyFtpLoginUsername OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Login username of the FTP server. If neither
fileCopySrcOperType nor fileCopyDestOperType is ftp(7),
this variable can be ignored."
::= { fileCopyMgt 12 }
fileCopyFtpLoginPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Login password of the FTP server. If neither
fileCopySrcOperType nor fileCopyDestOperType is ftp(7),
this variable can be ignored. This variable can only be
written. When this variable is read, it always returns a
zero-length string."
::= { fileCopyMgt 13 }
fileInfoMgt OBJECT IDENTIFIER ::= { fileMgt 2 }
--
-- This mangement performs the display and delete operation.
--
fileInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contain the information of the file system;
we can also perform the delete, set startup file operation."
::= { fileInfoMgt 1 }
fileInfoEntry OBJECT-TYPE
SYNTAX FileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptually row for fileInfoTable."
INDEX { fileInfoUnitID, IMPLIED fileInfoFileName}
::= { fileInfoTable 1 }
FileInfoEntry ::= SEQUENCE
{
fileInfoUnitID Integer32,
fileInfoFileName DisplayString,
fileInfoFileType INTEGER,
fileInfoIsStartUp TruthValue,
fileInfoFileSize Integer32,
fileInfoCreationTime DisplayString,
fileInfoDelete INTEGER
}
fileInfoUnitID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The switch unit in a stacking system, in a
non-stacking system, this value is always 1."
::= { fileInfoEntry 1 }
fileInfoFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The file Name of the file System in the device."
::= { fileInfoEntry 2 }
fileInfoFileType OBJECT-TYPE
SYNTAX INTEGER
{
diag(1),
runtime(2),
syslog(3),
cmdlog(4),
config(5),
postlog(6),
private(7),
certificate(8),
webarchive(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The file type of the file System in the device."
::= { fileInfoEntry 3 }
fileInfoIsStartUp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation."
::= { fileInfoEntry 4 }
fileInfoFileSize OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sizes( in bytes) of the file."
::= { fileInfoEntry 5 }
fileInfoCreationTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A single-digit day is preceded by
a space. 'hh:mm:ss' is a 24-hour representations of hours,
minutes, and seconds. A single-digit hour is preceded by a
zero. 'yyyy' is the four-digit year. An example is:
'Jan 1 02:03:04 2002'."
::= { fileInfoEntry 6 }
fileInfoDelete OBJECT-TYPE
SYNTAX INTEGER
{
noDelete(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write this object to delete(2) to delete a file, when
read, this always return noDelete(1)."
::= { fileInfoEntry 7 }
--fileAutoDownloadResultTable
fileAutoDownloadResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileAutoDownloadResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains file auto download result information."
::= { fileMgt 3 }
fileAutoDownloadResultEntry OBJECT-TYPE
SYNTAX FileAutoDownloadResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for fileAutoDownloadResultTable."
INDEX {fileAutoDownloadResultUnitID}
::= { fileAutoDownloadResultTable 1 }
FileAutoDownloadResultEntry ::= SEQUENCE
{
fileAutoDownloadResultUnitID Integer32,
fileAutoDownloadResultAction INTEGER,
fileAutoDownloadResultStatus FileCopyStatus
}
fileAutoDownloadResultUnitID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The switch unit in a stacking system, in a
non-stacking system, this value is always 1."
::= { fileAutoDownloadResultEntry 1 }
fileAutoDownloadResultAction OBJECT-TYPE
SYNTAX INTEGER
{
notCopying(1),
copying(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing.
You can check the download result through the fileAutoDownloadResultStatus object
after the download action has finished.
Please note that this object is read-only, since the auto download action is triggered
automatically by the system when an image file or a config file is set as startup setting
through the fileInfoIsStartUp, restartOpCodeFile or restartConfigFile objects,
but not set by the user manually through this fileAutoDownloadResultAction object."
::= { fileAutoDownloadResultEntry 2 }
fileAutoDownloadResultStatus OBJECT-TYPE
SYNTAX FileCopyStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before."
::= { fileAutoDownloadResultEntry 3 }
--
--dnsMgt
--
--dnsHostTable
dnsDomainLookup OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable the IP Domain Naming System (DNS)-based host name-to-address translation."
::= { dnsMgt 1 }
dnsDomainName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To define a default domain name to complete
unqualified host names (names without a dotted-decimal domain name)."
::= { dnsMgt 2 }
dnsHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to define static host name-to-address mapping."
::= { dnsMgt 3 }
dnsHostEntry OBJECT-TYPE
SYNTAX DnsHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsHostTable."
INDEX { dnsHostName, dnsHostIndex }
::= { dnsHostTable 1 }
DnsHostEntry ::= SEQUENCE
{
dnsHostName DisplayString,
dnsHostIndex Integer32,
dnsHostIp IpAddress
}
dnsHostName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The DNS Host name."
::= { dnsHostEntry 1 }
dnsHostIndex OBJECT-TYPE
SYNTAX Integer32(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The secondary index of this dnsHostTable, representing the
sequence of the dnsHostIp."
::= { dnsHostEntry 2 }
dnsHostIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The DNS Host IP."
::= { dnsHostEntry 3 }
--dnsAliasTable
dnsAliasTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsAliasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table displays the alias of the host name."
::= { dnsMgt 4 }
dnsAliasEntry OBJECT-TYPE
SYNTAX DnsAliasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsAliasTable."
INDEX { dnsAliasName, dnaAliasAlias }
::= { dnsAliasTable 1 }
DnsAliasEntry ::= SEQUENCE
{
dnsAliasName DisplayString,
dnaAliasAlias DisplayString
}
dnsAliasName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Host name."
::= { dnsAliasEntry 1 }
dnaAliasAlias OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alias."
::= { dnsAliasEntry 2 }
--dnsDomainListEntry
dnsDomainListTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsDomainListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table defines a list of default domain names to complete unqualified host names."
::= { dnsMgt 5 }
dnsDomainListEntry OBJECT-TYPE
SYNTAX DnsDomainListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsDomainListTable."
INDEX { dnsDomainListName }
::= { dnsDomainListTable 1 }
DnsDomainListEntry ::= SEQUENCE
{
dnsDomainListName DisplayString,
dnsDomainListStatus ValidStatus
}
dnsDomainListName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Domain name."
::= { dnsDomainListEntry 1 }
dnsDomainListStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { dnsDomainListEntry 2 }
--dnsNameServerEntry
dnsNameServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsNameServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "To specify the address of one or more
name servers to use for name and address resolution.
This table has fixed size, will get 0.0.0.0 dnsNameServerIp
if this entry is not existed."
::= { dnsMgt 6 }
dnsNameServerEntry OBJECT-TYPE
SYNTAX DnsNameServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for dnsNameServerTable."
INDEX { dnsNameServerIndex }
::= { dnsNameServerTable 1 }
DnsNameServerEntry ::= SEQUENCE
{
dnsNameServerIndex Integer32,
dnsNameServerIp IpAddress
}
dnsNameServerIndex OBJECT-TYPE
SYNTAX Integer32(1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this dnsNameServerTable,
representing the sequence of the dnsNameServerIp."
::= { dnsNameServerEntry 1 }
dnsNameServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of name server."
::= { dnsNameServerEntry 2 }
--dnsCacheEntry
dnsCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "To display the RRs in DNS cache."
::= { dnsMgt 7 }
dnsCacheEntry OBJECT-TYPE
SYNTAX DnsCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsCacheTable."
INDEX { dnsCacheIndex }
::= { dnsCacheTable 1 }
DnsCacheEntry ::= SEQUENCE
{
dnsCacheIndex Integer32,
dnsCacheFlag Integer32,
dnsCacheType INTEGER,
dnsCacheIp IpAddress,
dnsCacheTtl Integer32,
dnsCacheDomain DisplayString
}
dnsCacheIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry sequence number."
::= { dnsCacheEntry 1 }
dnsCacheFlag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Always get 4, means this record is unreliable."
::= { dnsCacheEntry 2 }
dnsCacheType OBJECT-TYPE
SYNTAX INTEGER
{
address(1),
cname(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cache Type: address(1); cname(2)."
::= { dnsCacheEntry 3 }
dnsCacheIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DNS cache IP."
::= { dnsCacheEntry 4 }
dnsCacheTtl OBJECT-TYPE
SYNTAX Integer32(0..876000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DNS cache TTL."
::= { dnsCacheEntry 5 }
dnsCacheDomain OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DNS cache domain."
::= { dnsCacheEntry 6 }
--
-- This mangement automatically upgrades image.
--
fileAutoUpgradeOpCodeStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to enabled(1) to enable the device to
automatically upgrade the current software image when a new
version is detected. Set this variable to disabled(2) to
disable this feature."
::= { fileAutoUpgradeMgt 1 }
fileAutoUpgradeOpCodePath OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The URL (Universal Resource Location) of the image file
location for automatic upgrades. The URL schema can be set to
TFTP or FTP. The Hostname is the IP address of the server. The
last character of the URL is always a '/' and the filename must
not be included in the URL."
::= { fileAutoUpgradeMgt 2 }
--
-- mcastStormMgt
--
mcastStormMgt OBJECT IDENTIFIER ::= { stormMgt 1 }
mcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF McastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the control of multicast storms for ports."
::= { mcastStormMgt 1 }
mcastStormEntry OBJECT-TYPE
SYNTAX McastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of multiStormTable."
INDEX { mcastStormIfIndex }
::= { mcastStormTable 1 }
McastStormEntry ::= SEQUENCE
{
mcastStormIfIndex Integer32,
mcastStormStatus EnabledStatus,
mcastStormPktRate Integer32
}
mcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { mcastStormEntry 1 }
mcastStormStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether multicast storm protection is enabled."
::= { mcastStormEntry 2 }
mcastStormPktRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Multicast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port."
::= { mcastStormEntry 4 }
--
-- bcastStormMgt
--
-- Management for broadcast storm control for ports.
bcastStormMgt OBJECT IDENTIFIER ::= { stormMgt 3 }
bcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the control of broadcast storms for ports."
::= { bcastStormMgt 1 }
bcastStormEntry OBJECT-TYPE
SYNTAX BcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of bcastStormTable."
INDEX { bcastStormIfIndex }
::= { bcastStormTable 1 }
BcastStormEntry ::= SEQUENCE
{
bcastStormIfIndex Integer32,
bcastStormStatus EnabledStatus,
bcastStormPktRate Integer32
}
bcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { bcastStormEntry 1 }
bcastStormStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether broadcast storm protection is enabled."
::= { bcastStormEntry 2 }
bcastStormPktRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Broadcast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. For a 10 Gbps port, the range
is 1042 to 262143."
::= { bcastStormEntry 4 }
--
-- unknownUcastStormMgt
--
unknownUcastStormMgt OBJECT IDENTIFIER ::= {stormMgt 4 }
unknownUcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF UnknownUcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the unknown unicast storm control."
::= { unknownUcastStormMgt 1 }
unknownUcastStormEntry OBJECT-TYPE
SYNTAX UnknownUcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of unknownUcastStormTable."
INDEX { unknownUcastStormIfIndex }
::= { unknownUcastStormTable 1 }
UnknownUcastStormEntry ::= SEQUENCE
{
unknownUcastStormIfIndex Integer32,
unknownUcastStormStatus EnabledStatus,
unknownUcastStormSampleType INTEGER,
unknownUcastStormPktRate INTEGER
}
unknownUcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port or trunk interface of the portTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB."
::= { unknownUcastStormEntry 1 }
unknownUcastStormStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that the unknown unicast
storm protection is enabled/disabled."
::= { unknownUcastStormEntry 2 }
unknownUcastStormSampleType OBJECT-TYPE
SYNTAX INTEGER {packet-rate(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates which storm protection mode is used."
::= { unknownUcastStormEntry 3 }
unknownUcastStormPktRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the packet rate of the storm protection."
::= { unknownUcastStormEntry 4 }
--
-- Auto Traffic Control
--
atcMgt OBJECT IDENTIFIER ::= { stormMgt 5 }
atcBcastStormTcApplyTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC (Auto
Traffic Control) is activated after the broadcast traffic
being detected as the storm."
::= { atcMgt 1 }
atcBcastStormTcReleaseTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC is released
after the broadcast traffic being detected as no storm."
::= { atcMgt 2 }
atcBcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtcBcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains the Auto Traffic Control configuration
and the status for broadcast traffic."
::= { atcMgt 3 }
atcBcastStormEntry OBJECT-TYPE
SYNTAX AtcBcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of the table."
INDEX { atcBcastStormIfIndex }
::= { atcBcastStormTable 1 }
AtcBcastStormEntry ::= SEQUENCE
{
atcBcastStormIfIndex Integer32,
atcBcastStormEnable EnabledStatus,
atcBcastStormAutoRelease EnabledStatus,
atcBcastStormSampleType INTEGER,
atcBcastStormCurrentTrafficRate Integer32,
atcBcastStormAlarmFireThreshold Integer32,
atcBcastStormAlarmClearThreshold Integer32,
atcBcastStormTcAction INTEGER,
atcBcastStormAlarmFireTrapStatus EnabledStatus,
atcBcastStormAlarmClearTrapStatus EnabledStatus,
atcBcastStormTcApplyTrapStatus EnabledStatus,
atcBcastStormTcReleaseTrapStatus EnabledStatus
}
atcBcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The specified port on which the ATC is applied."
::= { atcBcastStormEntry 1 }
atcBcastStormEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the ATC of the broadcast
traffic is applied."
::= { atcBcastStormEntry 2 }
atcBcastStormAutoRelease OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the Auto-Release feature
of ATC is applied."
::= { atcBcastStormEntry 3 }
atcBcastStormSampleType OBJECT-TYPE
SYNTAX INTEGER
{
packet-rate(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the unit of traffic rate and threshold."
::= { atcBcastStormEntry 4 }
atcBcastStormCurrentTrafficRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parameter indicates the current broadcast traffic rate."
::= { atcBcastStormEntry 5 }
atcBcastStormAlarmFireThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current broadcast traffic rate
exceeds the specified threshold, it will be treated as the storm.
The unit of the parameter is 1K and the value must be greater
than or equal to the atcBcastStormAlarmClearThreshold."
::= { atcBcastStormEntry 6 }
atcBcastStormAlarmClearThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current broadcast traffic
falls below the specified threshold it will be treated as the
normal traffic. The unit of the parameter is 1K and the value
must be less than or equal to the atcBcastStormAlarmFireThreshold."
::= { atcBcastStormEntry 7 }
atcBcastStormTcAction OBJECT-TYPE
SYNTAX INTEGER
{
rate-control(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the protecting action which
ATC will applied to the specified port."
::= { atcBcastStormEntry 8 }
atcBcastStormAlarmFireTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the broadcast storm has been detected."
::= { atcBcastStormEntry 9 }
atcBcastStormAlarmClearTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the broadcast storm has been detected as
the normal traffic."
::= { atcBcastStormEntry 10 }
atcBcastStormTcApplyTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is activated."
::= { atcBcastStormEntry 11 }
atcBcastStormTcReleaseTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is released."
::= { atcBcastStormEntry 12 }
atcMcastStormTcApplyTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC (Auto
Traffic Control) is activated after the broadcast traffic
being detected as the storm."
::= { atcMgt 4 }
atcMcastStormTcReleaseTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC is released
after the broadcast traffic being detected as no storm."
::= { atcMgt 5 }
atcMcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtcMcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains the Auto Traffic Control configuration
and the status for mulicast traffic."
::= { atcMgt 6 }
atcMcastStormEntry OBJECT-TYPE
SYNTAX AtcMcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of the table."
INDEX { atcMcastStormIfIndex }
::= { atcMcastStormTable 1 }
AtcMcastStormEntry ::= SEQUENCE
{
atcMcastStormIfIndex Integer32,
atcMcastStormEnable EnabledStatus,
atcMcastStormAutoRelease EnabledStatus,
atcMcastStormSampleType INTEGER,
atcMcastStormCurrentTrafficRate Integer32,
atcMcastStormAlarmFireThreshold Integer32,
atcMcastStormAlarmClearThreshold Integer32,
atcMcastStormTcAction INTEGER,
atcMcastStormAlarmFireTrapStatus EnabledStatus,
atcMcastStormAlarmClearTrapStatus EnabledStatus,
atcMcastStormTcApplyTrapStatus EnabledStatus,
atcMcastStormTcReleaseTrapStatus EnabledStatus
}
atcMcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The specified port on which the ATC is applied."
::= { atcMcastStormEntry 1 }
atcMcastStormEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the ATC of the mulicast
traffic is applied."
::= { atcMcastStormEntry 2 }
atcMcastStormAutoRelease OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the Auto-Release feature
of ATC is applied."
::= { atcMcastStormEntry 3 }
atcMcastStormSampleType OBJECT-TYPE
SYNTAX INTEGER
{
packet-rate(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the unit of traffic rate and threshold."
::= { atcMcastStormEntry 4 }
atcMcastStormCurrentTrafficRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parameter indicates the current mulicast traffic rate."
::= { atcMcastStormEntry 5 }
atcMcastStormAlarmFireThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current mulicast traffic rate
exceeds the specified threshold, it will be treated as the storm.
The unit of the parameter is 1K and the value must be greater than
or equal to the atcMcastStormAlarmClearThreshold."
::= { atcMcastStormEntry 6 }
atcMcastStormAlarmClearThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current mulicast traffic
falls below the specified threshold it will be treated as the
normal traffic. The unit of the parameter is 1K and the value
must be less than or equal to the atcMcastStormAlarmFireThreshold."
::= { atcMcastStormEntry 7 }
atcMcastStormTcAction OBJECT-TYPE
SYNTAX INTEGER
{
rate-control(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the protecting action which
ATC will applied to the specified port."
::= { atcMcastStormEntry 8 }
atcMcastStormAlarmFireTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the mulicast storm has been detected."
::= { atcMcastStormEntry 9 }
atcMcastStormAlarmClearTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the mulicast storm has been detected as
the normal traffic."
::= { atcMcastStormEntry 10 }
atcMcastStormTcApplyTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is activated."
::= { atcMcastStormEntry 11 }
atcMcastStormTcReleaseTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is released."
::= { atcMcastStormEntry 12 }
--
-- sysResourceMgt
--
-- monitor the configuration changes for the product
cpuStatus OBJECT IDENTIFIER ::= { sysResourceMgt 2 }
memoryStatus OBJECT IDENTIFIER ::= { sysResourceMgt 3 }
-- cpuStatus
cpuCurrentUti OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-only
STATUS current
DESCRIPTION
"The current CPU utilization in percent in the past 5 seconds."
::= { cpuStatus 1 }
cpuStatMaxUti OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum CPU utilization in percent in the past 60 seconds."
::= { cpuStatus 2 }
cpuStatAvgUti OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-only
STATUS current
DESCRIPTION
"The average CPU utilization in percent in the past 60 seconds."
::= { cpuStatus 3 }
cpuPeakTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"The time when the CPU utilization reaches cpuUtiRisingThreshold
in the format of 'Mmm _d hh:mm:ss yyyy' as defined
in sysCurrentTime of this MIB."
::= { cpuStatus 4 }
cpuPeakDuration OBJECT-TYPE
SYNTAX INTEGER
UNITS "second"
ACCESS read-only
STATUS current
DESCRIPTION
"The duration from the CPU utilization reaches cpuUtiRisingThreshold
to reaches cpuUtiFallingThreshold, in seconds."
::= { cpuStatus 5 }
cpuUtiRisingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-write
STATUS current
DESCRIPTION
"The rising threshold of the cpu utilization."
::= { cpuStatus 6 }
cpuUtiFallingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-write
STATUS current
DESCRIPTION
"The falling threshold of the cpu utilization."
::= { cpuStatus 7 }
-- memoryStatus
memoryTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of the memory in bytes."
::= { memoryStatus 1 }
memoryAllocated OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the memory allocated in bytes."
::= { memoryStatus 2 }
memoryFreed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the free memory in bytes."
::= { memoryStatus 3}
memoryFreedInPercent OBJECT-TYPE
SYNTAX INTEGER(1..100)
ACCESS read-only
STATUS current
DESCRIPTION
"the memory freed in proportion to the total memory."
::= { memoryStatus 4 }
memoryUtiRisingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-write
STATUS current
DESCRIPTION
"The rising threshold of the memory utilization."
::= { memoryStatus 5 }
memoryUtiFallingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-write
STATUS current
DESCRIPTION
"The falling threshold of the memory utilization."
::= { memoryStatus 6 }
--
--mvrMgt
--
mvrStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable MVR(Multicast VLAN
Registration) on the device. NOTE: IGMP Snooping
must be enabled first before enabling MVR and MVR
will be disabled when IGMP Snooping is disabled."
::= { mvrMgt 1 }
mvrVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To set VLAN for MVR.The VLAN identified by a particular
value of this index is the same VLAN as identified by the
same value of dot1qVlanIndex in the Q-BRIDGE-MIB."
::= { mvrMgt 2 }
mvrMaxGroups OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum number of MVR groups."
::= { mvrMgt 3 }
mvrCurrentGroups OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of MVR groups."
::= { mvrMgt 4}
mvrGroupsCtl OBJECT IDENTIFIER ::= { mvrMgt 5 }
mvrGroupsCtlId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The start of a contiguous range of MVR group
addresses."
::= { mvrGroupsCtl 1 }
mvrGroupsCtlCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The range count for configuring MVR group addresses."
::= { mvrGroupsCtl 2 }
mvrGroupsCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(0),
create(1),
destory(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the configure action for a contiguous range of MVR group
addresses. The start addresses is the current value of
mvrGroupsCtlId and the range count is the current value of
mvrGroupsCtlCount. Set this object to create(2) to
create MVR group addresses. Set this object
to destory(3) to delete MVR group addresses. When
the action is complete, this object becomes noAction(1)."
::= { mvrGroupsCtl 3 }
mvrGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the MVR group."
::= { mvrMgt 6 }
mvrGroupEntry OBJECT-TYPE
SYNTAX MvrGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR group."
INDEX {mvrGroupId}
::= { mvrGroupTable 1 }
MvrGroupEntry ::= SEQUENCE
{
mvrGroupId IpAddress,
mvrGroutActive INTEGER,
mvrGroupStatus INTEGER
}
mvrGroupId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The multicast address of the MVR group."
::= { mvrGroupEntry 1 }
mvrGroutActive OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "To indicate if the group has a member or not. If there are no
members, the status is inactive(2); otherwise the status
is active(1)."
::= { mvrGroupEntry 2 }
mvrGroupStatus OBJECT-TYPE
SYNTAX INTEGER
{
valid(1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry. Setting this
to invalid(2) destroys an entry."
::= { mvrGroupEntry 3 }
mvrGroupStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrGroupStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the static members of the
MVR group."
::= { mvrMgt 7 }
mvrGroupStaticEntry OBJECT-TYPE
SYNTAX MvrGroupStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the static members of the
MVR group."
INDEX {mvrGroupStaticAddress}
::= { mvrGroupStaticTable 1 }
MvrGroupStaticEntry ::= SEQUENCE
{
mvrGroupStaticAddress IpAddress,
mvrGroupStaticPorts PortList,
mvrGroupStaticStatus INTEGER
}
mvrGroupStaticAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The multicast address of the MVR group."
::= { mvrGroupStaticEntry 1 }
mvrGroupStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The set of ports configured by management in this entry.
Ports entered in this list will be the static members
of this MVR group."
::= { mvrGroupStaticEntry 2 }
mvrGroupStaticStatus OBJECT-TYPE
SYNTAX INTEGER
{
valid(1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry. Setting this
to invalid(2) destroys an entry."
::= { mvrGroupStaticEntry 3 }
mvrGroupCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrGroupCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for the current members of the MVR group."
::= { mvrMgt 8 }
mvrGroupCurrentEntry OBJECT-TYPE
SYNTAX MvrGroupCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for the current members of the MVR group."
INDEX {mvrGroupCurrentAddress}
::= { mvrGroupCurrentTable 1 }
MvrGroupCurrentEntry ::= SEQUENCE
{
mvrGroupCurrentAddress IpAddress,
mvrGroupCurrentPorts PortList
}
mvrGroupCurrentAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The multicast address of the MVR group."
::= { mvrGroupCurrentEntry 1 }
mvrGroupCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The complete set of ports currently associated with this
MVR group."
::= { mvrGroupCurrentEntry 2 }
mvrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the MVR port."
::= { mvrMgt 9 }
mvrPortEntry OBJECT-TYPE
SYNTAX MvrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR port."
INDEX {mvrIfIndex}
::= { mvrPortTable 1 }
MvrPortEntry ::= SEQUENCE
{
mvrIfIndex InterfaceIndex,
mvrPortType INTEGER,
mvrPortImmediateLeave EnabledStatus,
mvrPortActive INTEGER
}
mvrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the portTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of ifIndex
in the IF-MIB."
::= { mvrPortEntry 1 }
mvrPortType OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
source(1),
receiver(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "For configuring the MVR port type. To disable the MVR
port type, use the none(0)."
::= { mvrPortEntry 2 }
mvrPortImmediateLeave OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable immediate leave on MVR port."
::= { mvrPortEntry 3 }
mvrPortActive OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "To indicate if the port is associated with the MVR group.
If the port is the MVR receiver port or the MVR source
port in MVR vlan, the status is active(1); otherwise
the status is inactive(2)."
::= { mvrPortEntry 4 }
mvrRunningStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes the running status of MVR (Multicast VLAN Registration)
to the switch. A value of true(1) indicates that all necessary
conditions in the MVR environment are satisfied. A value of false(2)
indicates that some necessary conditions in the MVR environment are
not satisfied."
::= { mvrMgt 10 }
-- ---------------------------------------------------------------------
--
-- egressPacketBlockMgt
--
-- Management for egress packet block control for ports.
egressPacketBlockUnknownMcastTable OBJECT-TYPE
SYNTAX SEQUENCE OF EgressPacketBlockUnknownMcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the control of unknown multicast egress
packet block for ports."
::= { egressPacketBlockMgt 1 }
egressPacketBlockUnknownMcastEntry OBJECT-TYPE
SYNTAX EgressPacketBlockUnknownMcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of egressPacketBlockUnknownMcastTable."
INDEX { egressPacketBlockUnknownMcastIfIndex }
::= { egressPacketBlockUnknownMcastTable 1 }
EgressPacketBlockUnknownMcastEntry ::= SEQUENCE
{
egressPacketBlockUnknownMcastIfIndex InterfaceIndex,
egressPacketBlockUnknownMcastStatus EnabledStatus
}
egressPacketBlockUnknownMcastIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk interface of the portTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB."
::= { egressPacketBlockUnknownMcastEntry 1 }
egressPacketBlockUnknownMcastStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether unknown multicast egress packet block protection is enabled."
::= { egressPacketBlockUnknownMcastEntry 2 }
-- ----
egressPacketBlockUnknownUcastTable OBJECT-TYPE
SYNTAX SEQUENCE OF EgressPacketBlockUnknownUcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the control of unknown unicast egress
packet block for ports."
::= { egressPacketBlockMgt 2 }
egressPacketBlockUnknownUcastEntry OBJECT-TYPE
SYNTAX EgressPacketBlockUnknownUcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of unknownUcastTable."
INDEX { egressPacketBlockUnknownUcastIfIndex }
::= { egressPacketBlockUnknownUcastTable 1 }
EgressPacketBlockUnknownUcastEntry ::= SEQUENCE
{
egressPacketBlockUnknownUcastIfIndex InterfaceIndex,
egressPacketBlockUnknownUcastStatus EnabledStatus
}
egressPacketBlockUnknownUcastIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk interface of the portTable. The
interface identified by a particular value of this index
is the same interface as identified by the same value
of ifIndex in the IF-MIB."
::= { egressPacketBlockUnknownUcastEntry 1 }
egressPacketBlockUnknownUcastStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether unknown unicast egress packet block protection
is enabled."
::= { egressPacketBlockUnknownUcastEntry 2 }
-- ---------------------------------------------------------------------
--
-- dhcpSnoopMgt
--
-- Management of DHCP snooping and IP souce guard.
dhcpSnoopGlobal OBJECT IDENTIFIER ::= { dhcpSnoopMgt 1 }
dhcpSnoopVlan OBJECT IDENTIFIER ::= { dhcpSnoopMgt 2 }
dhcpSnoopInterface OBJECT IDENTIFIER ::= { dhcpSnoopMgt 3 }
dhcpSnoopBindings OBJECT IDENTIFIER ::= { dhcpSnoopMgt 4 }
dhcpSnoopStatistics OBJECT IDENTIFIER ::= { dhcpSnoopMgt 5 }
dhcpSnoopEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the DHCP Snooping feature is
enabled."
::= { dhcpSnoopGlobal 1 }
dhcpSnoopVerifyMacAddressEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether DHCP Snooping Mac address
verification is enabled."
::= { dhcpSnoopGlobal 2 }
dhcpSnoopInformationOptionEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the DHCP snooping information option(option 82) feature is
enabled."
::= { dhcpSnoopGlobal 3 }
dhcpSnoopInformationOptionPolicy OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
keep(2),
replace(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates which reforwarding policy shall be used for DHCP
snooping information option(option 82). A value of drop(1) means to drop
the DHCP request packet which has the information option(option 82).
A value of keep(2) means to keep the existing information option(option 82)
of the DHCP request packet. A value of replace(3), which is the default value,
means to replace the existing information option(option 82) of the DHCP
request packet."
::= { dhcpSnoopGlobal 4 }
--
dhcpSnoopVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains DHCP Snooping configurations of existing VLANs."
::= { dhcpSnoopVlan 1 }
dhcpSnoopVlanConfigEntry OBJECT-TYPE
SYNTAX DhcpSnoopVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN."
INDEX { dhcpSnoopVlanIndex }
::= { dhcpSnoopVlanConfigTable 1 }
DhcpSnoopVlanConfigEntry ::= SEQUENCE
{
dhcpSnoopVlanIndex VlanIndex,
dhcpSnoopVlanEnable EnabledStatus
}
dhcpSnoopVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN ID on which DHCP Snooping
feature is configured."
::= { dhcpSnoopVlanConfigEntry 1 }
dhcpSnoopVlanEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether DHCP Snooping is enabled in
this VLAN."
::= { dhcpSnoopVlanConfigEntry 2 }
--
dhcpSnoopPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table provides the mechanism to configure the trust
state of each port or trunk for DHCP Snooping purpose."
::= { dhcpSnoopInterface 1 }
dhcpSnoopPortConfigEntry OBJECT-TYPE
SYNTAX DhcpSnoopPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose."
INDEX { dhcpSnoopPortIfIndex }
::= { dhcpSnoopPortConfigTable 1 }
DhcpSnoopPortConfigEntry ::= SEQUENCE
{
dhcpSnoopPortIfIndex InterfaceIndex,
dhcpSnoopPortTrustEnable EnabledStatus
}
dhcpSnoopPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port or trunk."
::= { dhcpSnoopPortConfigEntry 1 }
dhcpSnoopPortTrustEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the port or trunk is trusted
for DHCP Snooping purpose."
::= { dhcpSnoopPortConfigEntry 2 }
--
dhcpSnoopBindingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopBindingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the DHCP bindings information learnt by
the device."
::= { dhcpSnoopBindings 1 }
dhcpSnoopBindingsEntry OBJECT-TYPE
SYNTAX DhcpSnoopBindingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status."
INDEX { dhcpSnoopBindingsVlanIndex, dhcpSnoopBindingsMacAddress }
::= { dhcpSnoopBindingsTable 1 }
DhcpSnoopBindingsEntry ::= SEQUENCE
{
dhcpSnoopBindingsVlanIndex VlanIndex,
dhcpSnoopBindingsMacAddress MacAddress,
dhcpSnoopBindingsAddrType InetAddressType,
dhcpSnoopBindingsEntryType INTEGER,
dhcpSnoopBindingsIpAddress IpAddress,
dhcpSnoopBindingsPortIfIndex InterfaceIndex,
dhcpSnoopBindingsLeaseTime Unsigned32
}
dhcpSnoopBindingsVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN which a DHCP client host
belongs to."
::= { dhcpSnoopBindingsEntry 1 }
dhcpSnoopBindingsMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the MAC address of a DHCP client
host."
::= { dhcpSnoopBindingsEntry 2 }
dhcpSnoopBindingsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the type of IP address denoted in
dhcpSnoopBindingsIpAddress type."
::= { dhcpSnoopBindingsEntry 3 }
dhcpSnoopBindingsEntryType OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), static(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates that this binding is obtained from
dynamically learning or is a static configuraion."
::= { dhcpSnoopBindingsEntry 4 }
dhcpSnoopBindingsIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the allocated IP address of
a DHCP client host."
::= { dhcpSnoopBindingsEntry 5 }
dhcpSnoopBindingsPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the port or trunk where a DHCP client
host connects to."
::= { dhcpSnoopBindingsEntry 6 }
dhcpSnoopBindingsLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the leased time of this DHCP
bindings."
::= { dhcpSnoopBindingsEntry 7 }
--
dhcpSnoopTotalForwardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of packets subjected to
DHCP Snooping is forwarded."
::= { dhcpSnoopStatistics 1 }
dhcpSnoopUntrustedPortDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the number of packets subjected to DHCP Snooping
is dropped because they come from untrusted interface."
::= { dhcpSnoopStatistics 3 }
--
-- clusterMgt
--
clusterEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables clustering on the device."
::= { clusterMgt 1 }
clusterCommanderEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the device as commander in a cluster."
::= { clusterMgt 2 }
clusterIpPool OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start internal IP address of a cluster pool."
::= { clusterMgt 4 }
clusterClearCandidateTable OBJECT-TYPE
SYNTAX INTEGER
{
noClear(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to clear(2) starts to clear the candidate table."
::= { clusterMgt 5 }
clusterRole OBJECT-TYPE
SYNTAX INTEGER
{
commander(1),
candidate(2),
activeMember(3),
disabled(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current role of the device in a cluster.
commander(1) : The switch is the controlling device in a
cluster.
candidate(2) : The switch has been discovered by the commander,
but it has not been manually configured
for access from the commander.
activeMember(3): The switch has been manually configured for access
from the commander and it is active
in the cluster.
disabled(5) : The switch has clustering disabled."
::= { clusterMgt 6 }
clusterMemberCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of members in a cluster."
::= { clusterMgt 7 }
clusterCandidateCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of candidates in a cluster."
::= { clusterMgt 8 }
clusterCandidateTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClusterCandidateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing cluster candidates."
::= { clusterMgt 9 }
clusterCandidateEntry OBJECT-TYPE
SYNTAX ClusterCandidateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the information of the candidate."
INDEX { clusterCandidateMacAddr}
::= { clusterCandidateTable 1 }
ClusterCandidateEntry ::=
SEQUENCE {
clusterCandidateMacAddr MacAddress,
clusterCandidateDesc DisplayString,
clusterCandidateRole INTEGER
}
clusterCandidateMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the candidate."
::= {clusterCandidateEntry 1 }
clusterCandidateDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..42))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the candidate."
::= {clusterCandidateEntry 3 }
clusterCandidateRole OBJECT-TYPE
SYNTAX INTEGER
{
candidate(2),
activeMember(3),
inactiveMember(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of the candidate.
candidate(2) : The switch is discovered by the commander,
but it has not been manually configured for
access from the commander.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is manually configured for access
from the commander, but it is inactive in
the cluster."
::= {clusterCandidateEntry 4 }
clusterMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClusterMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing clustering members."
::= { clusterMgt 10 }
clusterMemberEntry OBJECT-TYPE
SYNTAX ClusterMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the information of the member."
INDEX { clusterMemberId}
::= { clusterMemberTable 1 }
ClusterMemberEntry ::=
SEQUENCE {
clusterMemberId Unsigned32,
clusterMemberMacAddr MacAddress,
clusterMemberDesc DisplayString,
clusterMemberActive INTEGER
}
clusterMemberId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the member."
::= {clusterMemberEntry 1 }
clusterMemberMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the member."
::= {clusterMemberEntry 2 }
clusterMemberDesc OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..42))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the member."
::= {clusterMemberEntry 3 }
clusterMemberActive OBJECT-TYPE
SYNTAX INTEGER
{
activeMember(3),
inactiveMember(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active status of the member.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is manually configured for access
from the commander, but it is inactive in
the cluster."
::= {clusterMemberEntry 4 }
clusterMemberAddCtl OBJECT IDENTIFIER ::= { clusterMgt 11 }
clusterMemberAddCtlMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address of the device associated with clusterMemberAddCtlAction."
::= { clusterMemberAddCtl 1 }
clusterMemberAddCtlId OBJECT-TYPE
SYNTAX Unsigned32 (1..36)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The member id associated with clusterMemberAddCtlAction."
::= { clusterMemberAddCtl 2 }
clusterMemberAddCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAdd(1),
add(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Adds the device to members that can be accessed from the commander.
The MAC of the device is the current value of
clusterMemberAddCtlMacAddr and the assigned member ID is the current
value of clusterMemberAddCtlId. Set this object to add(2) to begin
adding the member."
::= { clusterMemberAddCtl 5 }
clusterMemberRemoveCtl OBJECT IDENTIFIER ::= { clusterMgt 12 }
clusterMemberRemoveCtlId OBJECT-TYPE
SYNTAX Unsigned32 (1..36)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The member ID associated with clusterMemberRemoveCtlAction."
::= { clusterMemberRemoveCtl 1 }
clusterMemberRemoveCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noRemove(1),
remove(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Removes the device from members that can be accessed from the commander.
The member ID is the current value of clusterMemberRemoveCtlId.
Set this object to remove(2) to begin removing the member."
::= { clusterMemberRemoveCtl 2 }
--
-- ipSrcGuardMgt
--
ipSrcGuardConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSrcGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the configurations to enable or disable
IP Source Guard at each port or trunk."
::= { ipSrcGuardMgt 1 }
ipSrcGuardConfigEntry OBJECT-TYPE
SYNTAX IpSrcGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable
or disable IP Source Guard at each port or trunk."
INDEX { ipSrcGuardPortIfIndex }
::= { ipSrcGuardConfigTable 1 }
IpSrcGuardConfigEntry ::= SEQUENCE
{
ipSrcGuardPortIfIndex InterfaceIndex,
ipSrcGuardMode INTEGER
}
ipSrcGuardPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object idents the port or trunk which is capable of
IP Source Guard feature."
::= { ipSrcGuardConfigEntry 1 }
ipSrcGuardMode OBJECT-TYPE
SYNTAX INTEGER { diabled(0), srcIp(1), srcIpMac(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether Ip Source Guard is enabled
at this interface. If the value equals 0, it means Ip Source
Guard is disabled. If the value equals 1, it means Ip Source
Guard is enabled, and packets are filtered by checking source ip.
If the value equals 2, it means Ip Source Guard is enabled
and packets are filtered by checking source ip and source mac."
::= { ipSrcGuardConfigEntry 2 }
ipSrcGuardAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSrcGuardAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the IP Source Guard bindings information
learnt by the device."
::= { ipSrcGuardMgt 2 }
ipSrcGuardAddrEntry OBJECT-TYPE
SYNTAX IpSrcGuardAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status."
INDEX { ipSrcGuardBindingsVlanIndex, ipSrcGuardBindingsMacAddress }
::= { ipSrcGuardAddrTable 1 }
IpSrcGuardAddrEntry ::= SEQUENCE
{
ipSrcGuardBindingsVlanIndex VlanIndex,
ipSrcGuardBindingsMacAddress MacAddress,
ipSrcGuardBindingsAddrType InetAddressType,
ipSrcGuardBindingsEntryType INTEGER,
ipSrcGuardBindingsIpAddress IpAddress,
ipSrcGuardBindingsPortIfIndex InterfaceIndex,
ipSrcGuardBindingsLeaseTime Unsigned32,
ipSrcGuardBindingsStatus RowStatus
}
ipSrcGuardBindingsVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN which a DHCP client host
belongs to."
::= { ipSrcGuardAddrEntry 1 }
ipSrcGuardBindingsMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the MAC address of a DHCP client
host."
::= { ipSrcGuardAddrEntry 2 }
ipSrcGuardBindingsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the type of IP address denoted in
ipSrcGuardBindingsIpAddress type."
::= { ipSrcGuardAddrEntry 3 }
ipSrcGuardBindingsEntryType OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), static(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates that this binding is obtained from
dynamically learning or is a static configuraion."
::= { ipSrcGuardAddrEntry 4 }
ipSrcGuardBindingsIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the allocated IP address of
a DHCP client host."
::= { ipSrcGuardAddrEntry 5 }
ipSrcGuardBindingsPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the port or trunk where a DHCP client
host connects to."
::= { ipSrcGuardAddrEntry 6 }
ipSrcGuardBindingsLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the leased time of this DHCP
bindings."
::= { ipSrcGuardAddrEntry 7 }
ipSrcGuardBindingsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row entry. This object issued to
manage the creation and deletion of conceptual rows.
The status column has six defined values: - 'active', which
indicates that the conceptual row is available for use by the
managed device; - 'notInService', which indicates that the
conceptual row exists in the agent, but is unavailable for use
by the managed device."
::= { ipSrcGuardAddrEntry 8 }
--
-- oamMgt
-- for ASE3528B-E1-FLF-38
--
oamPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF OamPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the status of OAM at each port."
::= { oamMgt 1 }
oamPortStatusEntry OBJECT-TYPE
SYNTAX OamPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the status of OAM at each port."
INDEX { oamPortIfIndex }
::= { oamPortStatusTable 1 }
OamPortStatusEntry ::= SEQUENCE
{
oamPortIfIndex InterfaceIndex,
oamEnableStatus EnabledStatus
}
oamPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { oamPortStatusEntry 1 }
oamEnableStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object configures the status of OAM at each port."
::= { oamPortStatusEntry 2 }
--
oamPortModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF OamPortModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the mode of OAM at each port."
::= { oamMgt 2 }
oamPortModeEntry OBJECT-TYPE
SYNTAX OamPortModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the mode of OAM at each port."
INDEX { oamPortModeIndex }
::= { oamPortModeTable 1 }
OamPortModeEntry ::= SEQUENCE
{
oamPortModeIndex InterfaceIndex,
oamPortMode INTEGER
}
oamPortModeIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { oamPortModeEntry 1 }
oamPortMode OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
passive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object configures the mode of OAM at each port."
::= { oamPortModeEntry 2 }
--
oamPortClearStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF OamPortClearStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of clear OAM statistics
at each port."
::= { oamMgt 3 }
oamPortClearStatEntry OBJECT-TYPE
SYNTAX OamPortClearStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of clear OAM statistics
at each port."
INDEX { oamPortClearStatIndex }
::= { oamPortClearStatTable 1 }
OamPortClearStatEntry ::= SEQUENCE
{
oamPortClearStatIndex InterfaceIndex,
oamClearStatistics INTEGER
}
oamPortClearStatIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { oamPortClearStatEntry 1 }
oamClearStatistics OBJECT-TYPE
SYNTAX INTEGER
{
noClear(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable is used to clear the counters for OAM.
Set this variable to clear(2) to perform the clear operation,
noClear(1) will always be displayed when reading this
variable."
::= { oamPortClearStatEntry 2 }
oamLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF OamLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for OAM remote loopback test."
::= { oamMgt 4 }
oamLoopbackEntry OBJECT-TYPE
SYNTAX OamLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for OAM remote loopback test."
INDEX { oamLoopbackTestIfIndex }
::= { oamLoopbackTable 1 }
OamLoopbackEntry ::= SEQUENCE
{
oamLoopbackTestIfIndex Integer32,
oamLoopbackTestPacketNumber Integer32,
oamLoopbackTestPacketSize Integer32,
oamLoopbackTestAction INTEGER,
oamLoopbackTestResultTx Counter32,
oamLoopbackTestResultRx Counter32
}
oamLoopbackTestIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port(excluding trunk). The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB."
::= { oamLoopbackEntry 1 }
oamLoopbackTestPacketNumber OBJECT-TYPE
SYNTAX Integer32(1..99999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting the packet number when performing loopback test."
::= { oamLoopbackEntry 2}
oamLoopbackTestPacketSize OBJECT-TYPE
SYNTAX Integer32(64..1518)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting the packet size when performing loopback test."
::= { oamLoopbackEntry 3 }
oamLoopbackTestAction OBJECT-TYPE
SYNTAX INTEGER
{
noTest(1),
test(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to test(2) to begin the loopback test.
This object will be noTest(1) when the loopback test is
canceled or the loopback test has finished."
::= { oamLoopbackEntry 4}
oamLoopbackTestResultTx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of the the total number of loopback frames transmitted
at last loopback test on this interface."
::= { oamLoopbackEntry 5}
oamLoopbackTestResultRx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of the the total number of loopback frames received
at last loopback test on this interface."
::= { oamLoopbackEntry 6}
--
-- remoteMgt
-- node 1-20 are form China
-- node 21 for ASE3528B-E1-FLF-38
--
remoteAcceptableFrameTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteAcceptableFrameTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains the acceptable frame type
configuration at the specified remote device."
::= { remoteMgt 1 }
remoteAcceptableFrameTypeEntry OBJECT-TYPE
SYNTAX RemoteAcceptableFrameTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry that contains the acceptable frame type
configuration at the specified remote device."
INDEX { remoteAcceptableFrameTypeIndex }
::= { remoteAcceptableFrameTypeTable 1 }
RemoteAcceptableFrameTypeEntry ::= SEQUENCE
{
remoteAcceptableFrameTypeIndex InterfaceIndex,
remoteAcceptableFrameType INTEGER
}
remoteAcceptableFrameTypeIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteAcceptableFrameTypeEntry 1 }
remoteAcceptableFrameType OBJECT-TYPE
SYNTAX INTEGER
{
both(1),
tagged(2),
untagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object configures the acceptable frame types at the
specified remote device."
::= { remoteAcceptableFrameTypeEntry 2 }
----
remoteEepromWriteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteEepromWriteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of whether EEPROM is
writable at the specified remote device."
::= { remoteMgt 2 }
remoteEepromWriteEntry OBJECT-TYPE
SYNTAX RemoteEepromWriteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry that contains the information of whether EEPROM
is writable at the specified remote device."
INDEX { remoteEepromWriteIndex }
::= { remoteEepromWriteTable 1 }
RemoteEepromWriteEntry ::= SEQUENCE
{
remoteEepromWriteIndex InterfaceIndex,
remoteEepromWriteEnableStatus EnabledStatus
}
remoteEepromWriteIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteEepromWriteEntry 1 }
remoteEepromWriteEnableStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the status of EEPROM at the
specified remote device."
::= { remoteEepromWriteEntry 2 }
----
remoteFlowControlEnbaleTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteFlowControlEnbaleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the flow control configuation at the
specified remote device."
::= { remoteMgt 3 }
remoteFlowControlEnbaleEntry OBJECT-TYPE
SYNTAX RemoteFlowControlEnbaleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry that contains the flow control configuration
at the specified remote device."
INDEX { remoteFLIndex }
::= { remoteFlowControlEnbaleTable 1 }
RemoteFlowControlEnbaleEntry ::= SEQUENCE
{
remoteFLIndex InterfaceIndex,
remoteFlowControlEnbale EnabledStatus
}
remoteFLIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteFlowControlEnbaleEntry 1 }
remoteFlowControlEnbale OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the status of flow control at the
specified remote device."
::= { remoteFlowControlEnbaleEntry 2 }
----
remoteNegotiationEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteNegotiationEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the auto-negotiation configuration
at the specified remote device."
::= { remoteMgt 4 }
remoteNegotiationEnableEntry OBJECT-TYPE
SYNTAX RemoteNegotiationEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the auto-negotiation configuration
at the specified remote device."
INDEX { remoteNegoIndex }
::= { remoteNegotiationEnableTable 1 }
RemoteNegotiationEnableEntry ::= SEQUENCE
{
remoteNegoIndex InterfaceIndex,
remoteNegotiationEnable EnabledStatus
}
remoteNegoIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteNegotiationEnableEntry 1 }
remoteNegotiationEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the status of auto negotiation
at the specified remote device."
::= { remoteNegotiationEnableEntry 2 }
----
remoteShutDownEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteShutDownEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of whether shutdown
process is enabled at the specified remote device."
::= { remoteMgt 5 }
remoteShutDownEnableEntry OBJECT-TYPE
SYNTAX RemoteShutDownEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of whether shutdown
process is enabled at the specified remote device."
INDEX { remoteSDIndex }
::= { remoteShutDownEnableTable 1 }
RemoteShutDownEnableEntry ::= SEQUENCE
{
remoteSDIndex InterfaceIndex,
remoteShutDownEnable EnabledStatus
}
remoteSDIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteShutDownEnableEntry 1 }
remoteShutDownEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable the remote ShutDown."
::= { remoteShutDownEnableEntry 2 }
----
remoteInputToSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteInputToSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of whether the input
is tagged or untagged at the specified remote device."
::= { remoteMgt 6 }
remoteInputToSwitchEntry OBJECT-TYPE
SYNTAX RemoteInputToSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of whether the input
is tagged or untagged at the specified remote device."
INDEX { remoteInputIndex }
::= { remoteInputToSwitchTable 1 }
RemoteInputToSwitchEntry ::= SEQUENCE
{
remoteInputIndex InterfaceIndex,
remoteInputToSwitch INTEGER
}
remoteInputIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteInputToSwitchEntry 1 }
remoteInputToSwitch OBJECT-TYPE
SYNTAX INTEGER
{
tagged(1),
untagged(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the packet format of input at the
specified remote device."
::= { remoteInputToSwitchEntry 2 }
----
remoteOutputToSubscriberTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteOutputToSubscriberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of whether output to
subscriber is tagged or untagged at the specified remote
device."
::= { remoteMgt 7 }
remoteOutputToSubscriberEntry OBJECT-TYPE
SYNTAX RemoteOutputToSubscriberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of whether output to
subscriber is tagged or untagged at the specified remote
device."
INDEX { remoteOutputIndex }
::= { remoteOutputToSubscriberTable 1 }
RemoteOutputToSubscriberEntry ::= SEQUENCE
{
remoteOutputIndex InterfaceIndex,
remoteOutputToSubscriber INTEGER
}
remoteOutputIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteOutputToSubscriberEntry 1 }
remoteOutputToSubscriber OBJECT-TYPE
SYNTAX INTEGER
{
tagged(1),
untagged(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the packet format of output to
subscriber at the specified remote device."
::= { remoteOutputToSubscriberEntry 2 }
----
remoteSpeedDuplexTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteSpeedDuplexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the speed-duplex configuration at the
specified remote device."
::= { remoteMgt 8 }
remoteSpeedDuplexEntry OBJECT-TYPE
SYNTAX RemoteSpeedDuplexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the speed-duplex configuration at the
specified remote device."
INDEX { remoteSpeedDuplexIndex }
::= { remoteSpeedDuplexTable 1 }
RemoteSpeedDuplexEntry ::= SEQUENCE
{
remoteSpeedDuplexIndex InterfaceIndex,
remoteSpeedDuplex INTEGER
}
remoteSpeedDuplexIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteSpeedDuplexEntry 1 }
remoteSpeedDuplex OBJECT-TYPE
SYNTAX INTEGER
{
half10(1),
full10(2),
half100(3),
full100(4),
negotiation(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the speed-duplex at the specified
remote device."
::= { remoteSpeedDuplexEntry 2 }
----
remoteMdixTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteMdixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the MDIX configuration at the specified
remote device."
::= { remoteMgt 9 }
remoteMdixEntry OBJECT-TYPE
SYNTAX RemoteMdixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the MDIX configuration at the specified
remote device."
INDEX { remoteMdixIndex }
::= { remoteMdixTable 1 }
RemoteMdixEntry ::= SEQUENCE
{
remoteMdixIndex InterfaceIndex,
remoteMdix INTEGER
}
remoteMdixIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteMdixEntry 1 }
remoteMdix OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
normal(2),
crossover(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the MDIX at the specified remote
device."
::= { remoteMdixEntry 2 }
----
remoteDefaultTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of default VLAN and
priority at the specified remote device."
::= { remoteMgt 10 }
remoteDefaultEntry OBJECT-TYPE
SYNTAX RemoteDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of default VLAN and
priority at the specified remote device."
INDEX { remoteDefaultIndex }
::= { remoteDefaultTable 1 }
RemoteDefaultEntry ::= SEQUENCE
{
remoteDefaultIndex InterfaceIndex,
remoteDefaultVlan INTEGER,
remoteDefaultPriority INTEGER,
remoteDefaultEnable EnabledStatus
}
remoteDefaultIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteDefaultEntry 1 }
remoteDefaultVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the default VLAN at the specified
remote device."
::= { remoteDefaultEntry 2 }
remoteDefaultPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the default priority at the remote
specified device."
::= { remoteDefaultEntry 3 }
remoteDefaultEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object is to take effect default VLAN and priority
at the remote specified device."
::= { remoteDefaultEntry 4 }
----
remoteProtocolVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteProtocolVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of protocal VLAN at the
remote specified device."
::= { remoteMgt 11 }
remoteProtocolVlanEntry OBJECT-TYPE
SYNTAX RemoteProtocolVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of protocal VLAN at the
specified remote device."
INDEX { remoteProtocolVlanIndex,remoteProtocolVlanEtherType }
::= { remoteProtocolVlanTable 1 }
RemoteProtocolVlanEntry ::= SEQUENCE
{
remoteProtocolVlanIndex InterfaceIndex,
remoteProtocolVlanEtherType Integer32,
remoteProtocolVlanVid INTEGER,
remoteProtocolVlanPririty INTEGER,
remoteProtocolVlanRowStatus EnabledStatus
}
remoteProtocolVlanIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteProtocolVlanEntry 1 }
remoteProtocolVlanEtherType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The object configures the Ether type at the specified
remote device."
::= { remoteProtocolVlanEntry 2 }
remoteProtocolVlanVid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The vlan of each port."
::= { remoteProtocolVlanEntry 3 }
remoteProtocolVlanPririty OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the VLAN ID at the specified remote
device."
::= { remoteProtocolVlanEntry 4 }
remoteProtocolVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row entry. This object is
issued to manage the creation and deletion of conceptual
rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but it is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but it is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station intending to create a new instance of a
conceptual row and to have its status automatically set
to be active and then to make it available for use by the
managed device;
- 'createAndWait', which is supplied by a management
station intending to create a new instance of a
conceptual row (but not to make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
intending to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService'
and 'active'. That is, when queried, an existing
conceptual row has only three states: it is available for
use by the managed device (the status column has value
'active'); it is not available for use by the managed
device, though the agent has sufficient information to
make it so (the status column has value 'notInService');
or, it is not available for use by the managed device,
and an attempt to make it so would be failed because the
agent has insufficient information (the state column has
value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { remoteProtocolVlanEntry 5 }
----
remoteQueueCosMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteQueueCosMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of queue number and
priority of CoS map at the specified remote device."
::= { remoteMgt 12 }
remoteQueueCosMapEntry OBJECT-TYPE
SYNTAX RemoteQueueCosMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of queue number and
priority of CoS map at the specified remote device."
INDEX { remoteQueueCosMapIndex,remoteQueueCosMapPriority }
::= { remoteQueueCosMapTable 1 }
RemoteQueueCosMapEntry ::= SEQUENCE
{
remoteQueueCosMapIndex InterfaceIndex,
remoteQueueCosMapPriority INTEGER,
remoteQueueCosMapQueue INTEGER,
remoteQueueCosMapEnable EnabledStatus
}
remoteQueueCosMapIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteQueueCosMapEntry 1 }
remoteQueueCosMapPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The object configures the priority at the specified
remote device."
::= { remoteQueueCosMapEntry 2 }
remoteQueueCosMapQueue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the queue number of CoS map at the
specified remote device."
::= { remoteQueueCosMapEntry 3 }
remoteQueueCosMapEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object is to take effect the queue Cos map setting at
the remote device."
::= { remoteQueueCosMapEntry 4 }
----
remoteQueueModeMgt OBJECT IDENTIFIER ::= { remoteMgt 13 }
remoteQueueModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteQueueModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of queue mode at the
specified remote device."
::= { remoteQueueModeMgt 1 }
remoteQueueModeEntry OBJECT-TYPE
SYNTAX RemoteQueueModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of queue mode at the
specified remote device."
INDEX { remoteOutputIndex }
::= { remoteQueueModeTable 1 }
RemoteQueueModeEntry ::= SEQUENCE
{
remoteQueueModeIndex InterfaceIndex,
remoteQueueMode INTEGER
}
remoteQueueModeIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteQueueModeEntry 1 }
remoteQueueMode OBJECT-TYPE
SYNTAX INTEGER
{
wrr(1),
strict(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the queue mode at the specified
remote device."
::= { remoteQueueModeEntry 2 }
remoteWrrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteWrrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of the weighted round
robin (WRR) at the specified remote device."
::= { remoteQueueModeMgt 2 }
remoteWrrPortEntry OBJECT-TYPE
SYNTAX RemoteWrrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of the WRR at the
specified remote device."
INDEX { remoteWrrPortIfIndex,remoteWrrPortQueueID }
::= { remoteWrrPortTable 1 }
RemoteWrrPortEntry ::= SEQUENCE
{
remoteWrrPortIfIndex Integer32,
remoteWrrPortQueueID Integer32,
remoteWrrPortWeight Integer32
}
remoteWrrPortIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteWrrPortEntry 1 }
remoteWrrPortQueueID OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The object configures the queue ID of WRR at the specified
remote device."
::= { remoteWrrPortEntry 2 }
remoteWrrPortWeight OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the weight of WRR at the specified
remote device."
::= { remoteWrrPortEntry 3 }
----
remoteMapTagPriorityMgt OBJECT IDENTIFIER ::= { remoteMgt 14 }
remoteMapTagPriStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteMapTagPriStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the status of tag-priority map at the
specified remote device."
::= { remoteMapTagPriorityMgt 1 }
remoteMapTagPriStatusEntry OBJECT-TYPE
SYNTAX RemoteMapTagPriStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the status of tag-priority map at the
specified remote device."
INDEX { remoteMapTagPriStatusIndex }
::= { remoteMapTagPriStatusTable 1 }
RemoteMapTagPriStatusEntry ::= SEQUENCE
{
remoteMapTagPriStatusIndex InterfaceIndex,
remoteMapTagPriStatus EnabledStatus
}
remoteMapTagPriStatusIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteMapTagPriStatusEntry 1 }
remoteMapTagPriStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the status of tap-priority map at
the specified remote device."
::= { remoteMapTagPriStatusEntry 2 }
remoteMapTagPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteMapTagPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of tag-priority map at
the specified remote device."
::= { remoteMapTagPriorityMgt 2 }
remoteMapTagPriorityEntry OBJECT-TYPE
SYNTAX RemoteMapTagPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of tag-priority map at
the specified remote device."
INDEX { remoteMapTagPriorityIndex,remoteMapTagPriority }
::= { remoteMapTagPriorityTable 1 }
RemoteMapTagPriorityEntry ::= SEQUENCE
{
remoteMapTagPriorityIndex Integer32,
remoteMapTagPriority Integer32,
remoteMapTagPriorityPri Integer32
}
remoteMapTagPriorityIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteMapTagPriorityEntry 1 }
remoteMapTagPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The object shows the tap-priority map at the specified
remote device."
::= { remoteMapTagPriorityEntry 2 }
remoteMapTagPriorityPri OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the priority of tap-priority map at
the specified remote device."
::= { remoteMapTagPriorityEntry 3 }
----
remoteMapTosMgt OBJECT IDENTIFIER ::= { remoteMgt 15 }
remoteMapTosStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteMapTosStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the status of ToS map at the specified
remote device."
::= { remoteMapTosMgt 1 }
remoteMapTosStatusEntry OBJECT-TYPE
SYNTAX RemoteMapTosStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the status of ToS map at the specified
remote device."
INDEX { remoteMapTosStatusIndex }
::= { remoteMapTosStatusTable 1 }
RemoteMapTosStatusEntry ::= SEQUENCE
{
remoteMapTosStatusIndex InterfaceIndex,
remoteMapTosEnableStatus EnabledStatus
}
remoteMapTosStatusIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteMapTosStatusEntry 1 }
remoteMapTosEnableStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the status of ToS map at the
specified remote device."
::= { remoteMapTosStatusEntry 2 }
remoteMapTosTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteMapTosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of ToS map at the
specified remote device."
::= { remoteMapTosMgt 2 }
remoteMapTosEntry OBJECT-TYPE
SYNTAX RemoteMapTosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of the TOS map at the
remote device."
INDEX { remoteMapTosIndex,remoteMapTos }
::= { remoteMapTosTable 1 }
RemoteMapTosEntry ::= SEQUENCE
{
remoteMapTosIndex Integer32,
remoteMapTos Integer32,
remoteMapTosPri Integer32,
remoteMapTosStatus RowStatus
}
remoteMapTosIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteMapTosEntry 1 }
remoteMapTos OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The object shows the ToS map at the specified remote
device."
::= { remoteMapTosEntry 2 }
remoteMapTosPri OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the the priority of ToS map at the
specified remote device."
::= { remoteMapTosEntry 3 }
remoteMapTosStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row entry. This object is
isused to manage the creation and deletion of conceptual
rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but it is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but it is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station intending to create a new instance of a
conceptual row and to have its status automatically set
to be active, and then to make it available for use by the
managed device;
- 'createAndWait', which is supplied by a management
station intending to create a new instance of a
conceptual row (but not to make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
intending to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService'
and 'active'. That is, when queried, an existing
conceptual row has only three states: it is available for
use by the managed device (the status column has value
'active'); it is not available for use by the managed
device, though the agent has sufficient information to
make it so (the status column has value 'notInService');
or, it is not available for use by the managed device,
and an attempt to make it so would be failed because the
agent has insufficient information (the state column has
value 'notReady').
For a detailed description of this object, please refer
to SNMPv2-TC MIB."
::= { remoteMapTosEntry 4 }
remoteMapTrafficClassMgt OBJECT IDENTIFIER ::= { remoteMgt 16 }
remoteMapTrafficClassStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteMapTrafficClassStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the status of traffic class map at the
specified remote device."
::= { remoteMapTrafficClassMgt 1 }
remoteMapTrafficClassStatusEntry OBJECT-TYPE
SYNTAX RemoteMapTrafficClassStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the status of traffic class map at the
specified remote device."
INDEX { remoteMapTCStatusIndex }
::= { remoteMapTrafficClassStatusTable 1 }
RemoteMapTrafficClassStatusEntry ::= SEQUENCE
{
remoteMapTCStatusIndex InterfaceIndex,
remoteMapTCEnableStatus EnabledStatus
}
remoteMapTCStatusIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteMapTrafficClassStatusEntry 1 }
remoteMapTCEnableStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the status of traffic class map at
the specified remote device."
::= { remoteMapTrafficClassStatusEntry 2 }
--remoteMapTrafficClassTable
remoteMapTrafficClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteMapTrafficClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of traffic class map at
the specified remote device."
::= { remoteMapTrafficClassMgt 2 }
remoteMapTrafficClassEntry OBJECT-TYPE
SYNTAX RemoteMapTrafficClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the information of traffic class map
at the specified remote device."
INDEX { remoteMapTrafficClassIfIndex,remoteMapTrafficClass }
::= { remoteMapTrafficClassTable 1 }
RemoteMapTrafficClassEntry ::= SEQUENCE
{
remoteMapTrafficClassIfIndex Integer32,
remoteMapTrafficClass Integer32,
remoteMapCos Integer32,
remoteMapTrafficClassStatus RowStatus
}
remoteMapTrafficClassIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteMapTrafficClassEntry 1 }
remoteMapTrafficClass OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The object shows the traffic class map at the specified
remote device."
REFERENCE "MIB.IETF|Q-BRIDGE-MIB.dot1dTrafficClass."
::= { remoteMapTrafficClassEntry 2 }
remoteMapCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object configures the value of CoS at the specified
remote device."
::= { remoteMapTrafficClassEntry 3 }
remoteMapTrafficClassStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row entry. This object is
issued to manage the creation and deletion of conceptual
rows.
For the following, check the corrections above.
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady')
may be specified in a management protocol set operation,
only three values will be returned in response to a
management protocol retrieval operation: 'notReady',
'notInService' or 'active'. That is, when queried, an
existing conceptual row has only three states: it is
either available for use by the managed device (the
status column has value 'active'); it is not available
for use by the managed device, though the agent has
sufficient information to make it so (the status column
has value 'notInService'); or, it is not available for
use by the managed device, and an attempt to make it so
would fail because the agent has insufficient information
(the state column has value 'notReady').
For a detailed description of this object, please refer
to SNMPv2-TC MIB."
::= { remoteMapTrafficClassEntry 4 }
----
----
remoteFactoryDefaultTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteFactoryDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the factory default setting at the
specified remote device."
::= { remoteMgt 17 }
remoteFactoryDefaultEntry OBJECT-TYPE
SYNTAX RemoteFactoryDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the factory default setting at the
specified remote device."
INDEX { remoteFactoryDefaultIndex }
::= { remoteFactoryDefaultTable 1 }
RemoteFactoryDefaultEntry ::= SEQUENCE
{
remoteFactoryDefaultIndex InterfaceIndex,
remoteFactoryDefault INTEGER
}
remoteFactoryDefaultIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteFactoryDefaultEntry 1 }
remoteFactoryDefault OBJECT-TYPE
SYNTAX INTEGER
{
set(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is to apply the factory default setting at
the specified remote device."
::= { remoteFactoryDefaultEntry 2 }
----
remoteDeviceStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteDeviceStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table shows the statistics for each remote device's
port."
::= { remoteMgt 18 }
remoteDeviceStatisticEntry OBJECT-TYPE
SYNTAX RemoteDeviceStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry shows the statistics for each remote device's
port."
INDEX { remoteStatisticPortIndex,remoteDeviceStatisticIfIndex }
::= { remoteDeviceStatisticTable 1 }
RemoteDeviceStatisticEntry ::= SEQUENCE
{
remoteStatisticPortIndex InterfaceIndex,
remoteDeviceStatisticIfIndex INTEGER,
remoteTxPausePacket INTEGER,
remoteRxPausePacket INTEGER,
remoteRxErrorPacket INTEGER
}
remoteStatisticPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteDeviceStatisticEntry 1 }
remoteDeviceStatisticIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the remote device."
::= { remoteDeviceStatisticEntry 2 }
remoteTxPausePacket OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of pause frames transmitted from the
remote device's port."
::= { remoteDeviceStatisticEntry 3 }
remoteRxPausePacket OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of pause frames received from the remote
device's port."
::= { remoteDeviceStatisticEntry 4 }
remoteRxErrorPacket OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of error frames received from the remote
device's port."
::= { remoteDeviceStatisticEntry 5 }
remoteQueuePacketStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteQueuePacketStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the packet statistics of each queue for
the remote device's port."
::= { remoteMgt 19 }
remoteQueuePacketStatisticEntry OBJECT-TYPE
SYNTAX RemoteQueuePacketStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the packet statistics of each queue for
the remote device's port."
INDEX { remoteQueuePacketStatisticPortIndex,
remoteQueuePacketDeviceStatisticIfIndex,
remoteQueuePacketQueueIndex }
::= { remoteQueuePacketStatisticTable 1 }
RemoteQueuePacketStatisticEntry ::= SEQUENCE
{
remoteQueuePacketStatisticPortIndex InterfaceIndex,
remoteQueuePacketDeviceStatisticIfIndex INTEGER,
remoteQueuePacketQueueIndex INTEGER,
remoteQueueDropPacket INTEGER,
remoteQueueForwardingPacket INTEGER
}
remoteQueuePacketStatisticPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteQueuePacketStatisticEntry 1 }
remoteQueuePacketDeviceStatisticIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the specified
remote device."
::= { remoteQueuePacketStatisticEntry 2 }
remoteQueuePacketQueueIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the index of packet queue of the
specified remote device."
::= { remoteQueuePacketStatisticEntry 3 }
remoteQueueDropPacket OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets dropped by the remote device's
port."
::= { remoteQueuePacketStatisticEntry 4 }
remoteQueueForwardingPacket OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets forwarded by the remote
device's port."
::= { remoteQueuePacketStatisticEntry 5 }
remoteMacAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the MAC address of the specified remote
device."
::= { remoteMgt 20 }
remoteMacAddressEntry OBJECT-TYPE
SYNTAX RemoteMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains the MAC address of the specified remote
device."
INDEX { remoteMacAddressIfIndex }
::= { remoteMacAddressTable 1 }
RemoteMacAddressEntry ::= SEQUENCE
{
remoteMacAddressIfIndex InterfaceIndex,
remoteMacAddress OCTET STRING,
remoteMacAddressStatus ValidStatus
}
remoteMacAddressIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object shows the ifIndex value of the port excluding
trunk."
::= { remoteMacAddressEntry 1 }
remoteMacAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object shows the MAC address of the specified remote
device."
::= { remoteMacAddressEntry 2 }
remoteMacAddressStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object shows the information of whether the MAC
address of the remote device is valided."
::= { remoteMacAddressEntry 3 }
--
-- remoteDeviceMgt
--
remoteDeviceMgt OBJECT IDENTIFIER ::= { remoteMgt 21 }
remoteDeviceReset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To reset the remote device which is connected to a port,
assign remoteDeviceReset to the value of ifIndex defined
by the ifIndex in the IF-MIB. When read, this object
always returns 0."
::= { remoteDeviceMgt 1 }
remoteDeviceFactoryDefault OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To reset the remote device which is connected to a port
and restore the default setting, assign
remoteDeviceFactoryDefault to the value of ifIndex defined
by the ifIndex in the IF-MIB. When read, this object
always returns 0."
::= { remoteDeviceMgt 2 }
remoteAccessPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteAccessPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the access point setting of CPE."
::= { remoteDeviceMgt 3 }
remoteAccessPointEntry OBJECT-TYPE
SYNTAX RemoteAccessPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the remoteAccessPoint table."
INDEX { remoteAccessPointLocalPort }
::= { remoteAccessPointTable 1 }
RemoteAccessPointEntry ::= SEQUENCE
{
remoteAccessPointLocalPort InterfaceIndex,
remoteAccessPointStatus EnabledStatus
}
remoteAccessPointLocalPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { remoteAccessPointEntry 1 }
remoteAccessPointStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this to enabled(1) to enable the Wireless Access Point
function. Sets disabled(2) to disable the Wireless
Access Point function."
::= { remoteAccessPointEntry 2 }
--
-- remoteDhcpServerTable
--
remoteDhcpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteDhcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the DHCP server setting of CPE."
::= { remoteDeviceMgt 4 }
remoteDhcpServerEntry OBJECT-TYPE
SYNTAX RemoteDhcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the remoteDhcpServer table."
INDEX { remoteDhcpServerLocalPort}
::= { remoteDhcpServerTable 1 }
RemoteDhcpServerEntry ::= SEQUENCE
{
remoteDhcpServerLocalPort InterfaceIndex,
remoteDhcpServerStatus EnabledStatus,
remoteDhcpServerIpAddress IpAddress,
remoteDhcpServerSubnetMask IpAddress,
remoteDhcpServerGateway IpAddress
}
remoteDhcpServerLocalPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { remoteDhcpServerEntry 1 }
remoteDhcpServerStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If this is enabled(1), the remote device acts as a DHCP
server on the LAN side. If this is disabled(2), the remote
device does not act as a DHCP server."
::= { remoteDhcpServerEntry 2 }
remoteDhcpServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address of DHCP server at remote device."
::= { remoteDhcpServerEntry 3 }
remoteDhcpServerSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The subnet mask of DHCP server at remote device."
::= { remoteDhcpServerEntry 4 }
remoteDhcpServerGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address of the default gateway at remote device.
If this value is undefined or unknown, it shall have the
value 0.0.0.0."
::= { remoteDhcpServerEntry 5 }
--
-- remoteVlanTable
--
remoteVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the VLAN settings of CPE."
::= { remoteDeviceMgt 5 }
remoteVlanEntry OBJECT-TYPE
SYNTAX RemoteVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the remoteVlan table."
INDEX { remoteVlanLocalPort, remoteVlanId}
::= { remoteVlanTable 1 }
RemoteVlanEntry ::= SEQUENCE
{
remoteVlanLocalPort InterfaceIndex,
remoteVlanId Integer32,
remoteVlanStatus ValidStatus
}
remoteVlanLocalPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { remoteVlanEntry 1 }
remoteVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifiies the VLAN ID."
::= { remoteVlanEntry 2 }
remoteVlanStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set valid(1) to create the VLAN. Set invalid(2) to delete
the VLAN."
::= { remoteVlanEntry 3 }
--
-- remotePortMgt
--
remotePortMgt OBJECT IDENTIFIER ::= { remoteMgt 22 }
remotePortAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemotePortAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the admin status of LAN ports on CPE."
::= { remotePortMgt 1 }
remotePortAdminEntry OBJECT-TYPE
SYNTAX RemotePortAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the remotePortAdmin table."
INDEX { remotePortAdminLocalPort, remotePortAdminRemotePort }
::= { remotePortAdminTable 1 }
RemotePortAdminEntry ::= SEQUENCE
{
remotePortAdminLocalPort InterfaceIndex,
remotePortAdminRemotePort Integer32,
remotePortAdminStatus EnabledStatus
}
remotePortAdminLocalPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { remotePortAdminEntry 1 }
remotePortAdminRemotePort OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of remote device."
::= { remotePortAdminEntry 2 }
remotePortAdminStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If this is enabled(1), the remote port is in enabled. If
this is disabled(2), the remote port is not in enabled."
::= { remotePortAdminEntry 3 }
remotePortPvidTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemotePortPvidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the VID of LAN ports on CPE."
::= { remotePortMgt 2 }
remotePortPvidEntry OBJECT-TYPE
SYNTAX RemotePortPvidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the remotePortPvid table."
INDEX { remotePortPvidLocalPort, remotePortPvidRemotePort }
::= { remotePortPvidTable 1 }
RemotePortPvidEntry ::= SEQUENCE
{
remotePortPvidLocalPort InterfaceIndex,
remotePortPvidRemotePort Integer32,
remotePortPvid Integer32
}
remotePortPvidLocalPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { remotePortPvidEntry 1 }
remotePortPvidRemotePort OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of remote device."
::= { remotePortPvidEntry 2 }
remotePortPvid OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets default VLAN on remote port."
::= { remotePortPvidEntry 3 }
remotePortPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemotePortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the priority of LAN ports on CPE."
::= { remotePortMgt 3 }
remotePortPriorityEntry OBJECT-TYPE
SYNTAX RemotePortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the remotePortPriority table."
INDEX { remotePortPriorityLocalPort, remotePortPriorityRemotePort }
::= { remotePortPriorityTable 1 }
RemotePortPriorityEntry ::= SEQUENCE
{
remotePortPriorityLocalPort InterfaceIndex,
remotePortPriorityRemotePort Integer32,
remotePortPriority Integer32
}
remotePortPriorityLocalPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { remotePortPriorityEntry 1 }
remotePortPriorityRemotePort OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of remote device."
::= { remotePortPriorityEntry 2 }
remotePortPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets default priority on remote port."
::= { remotePortPriorityEntry 3 }
remotePortIgmpSnoopingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemotePortIgmpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the IGMP snooping status of LAN ports on CPE."
::= { remotePortMgt 4 }
remotePortIgmpSnoopingEntry OBJECT-TYPE
SYNTAX RemotePortIgmpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the remotePortIgmpSnooping table."
INDEX { remotePortIgmpSnoopingLocalPort, remotePortIgmpSnoopingRemotePort }
::= { remotePortIgmpSnoopingTable 1 }
RemotePortIgmpSnoopingEntry ::= SEQUENCE
{
remotePortIgmpSnoopingLocalPort InterfaceIndex,
remotePortIgmpSnoopingRemotePort Integer32,
remotePortIgmpSnooping EnabledStatus
}
remotePortIgmpSnoopingLocalPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { remotePortIgmpSnoopingEntry 1 }
remotePortIgmpSnoopingRemotePort OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of remote device."
::= { remotePortIgmpSnoopingEntry 2 }
remotePortIgmpSnooping OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If this is enabled(1), IGMP snooping is enabled on the
remote port. If this is disabled(2), IGMP snooping is
disabled on the remote port."
::= { remotePortIgmpSnoopingEntry 3 }
remotePortCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemotePortCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the information of LAN ports on CPE."
::= { remotePortMgt 5 }
remotePortCountersEntry OBJECT-TYPE
SYNTAX RemotePortCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the remotePortCounters table."
INDEX { remotePortCountersLocalPort, remotePortCountersRemotePort }
::= { remotePortCountersTable 1 }
RemotePortCountersEntry ::= SEQUENCE
{
remotePortCountersLocalPort InterfaceIndex,
remotePortCountersRemotePort Integer32,
remotePortCountersInUnicastSupported TruthValue,
remotePortCountersInUnicast Counter32,
remotePortCountersInBroadcastSupported TruthValue,
remotePortCountersInBroadcast Counter32,
remotePortCountersInPauseSupported TruthValue,
remotePortCountersInPause Counter32,
remotePortCountersInMulticastSupported TruthValue,
remotePortCountersInMulticast Counter32,
remotePortCountersOutUnicastSupported TruthValue,
remotePortCountersOutUnicast Counter32,
remotePortCountersOutBroadcastSupported TruthValue,
remotePortCountersOutBroadcast Counter32,
remotePortCountersOutMulticastSupported TruthValue,
remotePortCountersOutMulticast Counter32,
remotePortCountersInFcsErrorsSupported TruthValue,
remotePortCountersInFcsErrors Counter32,
remotePortCountersOutFcsErrorsSupported TruthValue,
remotePortCountersOutFcsErrors Counter32,
remotePortCountersInGoodOctetsSupported TruthValue,
remotePortCountersInGoodOctets Counter32,
remotePortCountersOutGoodOctetsSupported TruthValue,
remotePortCountersOutGoodOctets Counter32,
remotePortCountersInBadOctetsSupported TruthValue,
remotePortCountersInBadOctets Counter32,
remotePortCountersInDiscardsSupported TruthValue,
remotePortCountersInDiscards Counter32,
remotePortCountersAlignmentErrorsSupported TruthValue,
remotePortCountersAlignmentErrors Counter32,
remotePortCountersUndersizeErrorsSupported TruthValue,
remotePortCountersUndersizeErrors Counter32
}
remotePortCountersLocalPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { remotePortCountersEntry 1 }
remotePortCountersRemotePort OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of remote device."
::= { remotePortCountersEntry 2 }
remotePortCountersInUnicastSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports receiving
unicast packet counts. A value of false(2) indicates that
not support receiving unicast packet counts."
::= { remotePortCountersEntry 3 }
remotePortCountersInUnicast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of unicast packets received from
remote port."
::= { remotePortCountersEntry 4 }
remotePortCountersInBroadcastSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports receiving
broadcast packet counts. A value of false(2) indicates
that not support receiving broadcast packet counts."
::= { remotePortCountersEntry 5 }
remotePortCountersInBroadcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of broadcasts packets received from
remote port."
::= { remotePortCountersEntry 6 }
remotePortCountersInPauseSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports receiving
pause packet counts. A value of false(2) indicates that
not support receiving pause packet counts."
::= { remotePortCountersEntry 7 }
remotePortCountersInPause OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of pause packets received from
remote port."
::= { remotePortCountersEntry 8 }
remotePortCountersInMulticastSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports receiving
multicast packet counts. A value of false(2) indicates
that not support receiving multicast packet counts."
::= { remotePortCountersEntry 9 }
remotePortCountersInMulticast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of multicasts packets received from
remote port."
::= { remotePortCountersEntry 10 }
remotePortCountersOutUnicastSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports transmitting
unicast packet counts. A value of false(2) indicates that
not support transmitting unicast packet counts."
::= { remotePortCountersEntry 11 }
remotePortCountersOutUnicast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of unicast packets transmitted from
remote port."
::= { remotePortCountersEntry 12 }
remotePortCountersOutBroadcastSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports transmitting
broadcast packet counts. A value of false(2) indicates
that not support transmitting broadcast packet counts."
::= { remotePortCountersEntry 13 }
remotePortCountersOutBroadcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of broadcast packets transmitted from
remote port."
::= { remotePortCountersEntry 14 }
remotePortCountersOutMulticastSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports transmitting
multicast packet counts. A value of false(2) indicates
that not support transmitting multicast packet counts."
::= { remotePortCountersEntry 15 }
remotePortCountersOutMulticast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of multicast packets transmitted from
remote port."
::= { remotePortCountersEntry 16 }
remotePortCountersInFcsErrorsSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports receiving
FCS error packet counts. A value of false(2) indicates
that not support receiving FCS error packet counts."
::= { remotePortCountersEntry 17 }
remotePortCountersInFcsErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of FCS error packets received from
remote port."
::= { remotePortCountersEntry 18 }
remotePortCountersOutFcsErrorsSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports transmitting
FCS error packet counts. A value of false(2) indicates
that not support transmitting FCS error packet counts."
::= { remotePortCountersEntry 19 }
remotePortCountersOutFcsErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of FCS error packets transmitted from
remote port."
::= { remotePortCountersEntry 20 }
remotePortCountersInGoodOctetsSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports receiving
normal packet counts. A value of false(2) indicates that
not support receiving normal packet counts."
::= { remotePortCountersEntry 21 }
remotePortCountersInGoodOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of normal packets received from
remote port."
::= { remotePortCountersEntry 22 }
remotePortCountersOutGoodOctetsSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports transmitting
normal packet counts. A value of false(2) indicates that
not support transmitting normal packet counts."
::= { remotePortCountersEntry 23 }
remotePortCountersOutGoodOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of normal packets transmitted from
remote port."
::= { remotePortCountersEntry 24 }
remotePortCountersInBadOctetsSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports receiving
bad packet counts. A value of false(2) indicates that
not support receiving bad packet counts."
::= { remotePortCountersEntry 25 }
remotePortCountersInBadOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of bad packets received from
remote port."
::= { remotePortCountersEntry 26 }
remotePortCountersInDiscardsSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports receiving
discard packet counts. A value of false(2) indicates
that not support receiving discard packet counts."
::= { remotePortCountersEntry 27 }
remotePortCountersInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of discard packets received from
remote port."
::= { remotePortCountersEntry 28 }
remotePortCountersAlignmentErrorsSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports align
error packet counts. A value of false(2) indicates that
not support alignment error packet counts."
::= { remotePortCountersEntry 29 }
remotePortCountersAlignmentErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of frames received on a particular
interface that are not an integral number of
octets in length and do not pass the FCS check."
::= { remotePortCountersEntry 30 }
remotePortCountersUndersizeErrorsSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) indicates that supports under
error packet counts. A value of false(2) indicates that
not support under error packet counts."
::= { remotePortCountersEntry 31 }
remotePortCountersUndersizeErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed."
::= { remotePortCountersEntry 32 }
--
-- dynamicArpInspectionMgt
--
daiGlobal OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 1 }
daiVlan OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 2 }
daiInterface OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 3 }
daiLog OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 4 }
daiStatistics OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 5 }
daiGlobalStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable dynamic ARP inspection.
Set disabled(2) to disable dynamic ARP inspection."
::= { daiGlobal 1 }
daiGlobalSrcMacValidation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable validation of source MAC address.
Set disabled(2) to disable validation of source MAC
address."
::= { daiGlobal 2 }
daiGlobalDestMacValidation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable validation of destination
MAC address. Set disabled(2) to disable validation
of destination MAC address."
::= { daiGlobal 3 }
daiGlobalIpAddrValidation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable validation of IP address.
Set disabled(2) to disable validation of IP address."
::= { daiGlobal 4 }
daiGlobalLogNumber OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of log buffers for saving log message.
The value 0 means not generating system messages."
::= { daiGlobal 5 }
daiGlobalLogInterval OBJECT-TYPE
SYNTAX Integer32(0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the time interval for saving log messages."
::= { daiGlobal 6 }
daiGlobalAdditionalValidStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The vaule of this object is disabled(2) when the status of
daiGlobalSrcMacValidation, daiGlobalDestMacValidation,
and daiGlobalIpAddrValidation are disabled; enabled(1)
when one or more of these variables are enabled."
::= { daiGlobal 7 }
daiVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DaiVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains dynamic ARP inspection configurations
for existing VLANs."
::= { daiVlan 1 }
daiVlanEntry OBJECT-TYPE
SYNTAX DaiVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing the configuration of dynamic ARP
inspection for each existing VLAN."
INDEX { daiVlanIndex }
::= { daiVlanTable 1 }
DaiVlanEntry ::= SEQUENCE
{
daiVlanIndex VlanIndex,
daiVlanStatus EnabledStatus,
daiVlanArpAclName DisplayString,
daiVlanArpAclStatus INTEGER
}
daiVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN ID on which dynamic ARP
inspection is configured."
::= { daiVlanEntry 1 }
daiVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether dynamic ARP inspection
is enabled in this VLAN."
::= { daiVlanEntry 2 }
daiVlanArpAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the ARP ACL name bound to the interface.
The default value of daiVlanArpAclStatus is dynamic(2)."
::= { daiVlanEntry 3 }
daiVlanArpAclStatus OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set to static(1) means packets not matching the ACL are
dropped. Set to dynamic(2) means packets not matching the
ACL are validated by the DHCP snooping binding table.
When daiVlanArpAclName is configured, the default value
of daiVlanArpAclStatus is dynamic(2)."
::= { daiVlanEntry 4 }
daiPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DaiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing dynamic ARP inspection configurations
for port interfaces."
::= { daiInterface 1 }
daiPortEntry OBJECT-TYPE
SYNTAX DaiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing the configuration of dynamic ARP
inspection at each port interface."
INDEX { daiPortIfIndex }
::= { daiPortTable 1 }
DaiPortEntry ::= SEQUENCE
{
daiPortIfIndex InterfaceIndex,
daiPortTrustStatus EnabledStatus,
daiPortRateLimit Unsigned32
}
daiPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port."
::= { daiPortEntry 1 }
daiPortTrustStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the port is trusted for
dynamic ARP inspection."
::= { daiPortEntry 2 }
daiPortRateLimit OBJECT-TYPE
SYNTAX Unsigned32(0..2048|'FFFFFFFF'h)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of rate limit threshold per second of disposing
ARP messages. Set the value 0xFFFFFFFF as no rate limit."
::= { daiPortEntry 3 }
daiLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF DaiLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing dynamic ARP inspection log
information."
::= { daiLog 1 }
daiLogEntry OBJECT-TYPE
SYNTAX DaiLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing log information of dynamic ARP
inspection at each VLAN interface."
INDEX { daiLogIndex }
::= { daiLogTable 1 }
DaiLogEntry ::= SEQUENCE
{
daiLogIndex Integer32,
daiLogVlan VlanIndex,
daiLogPort InterfaceIndex,
daiLogSrcIpAddress IpAddress,
daiLogDestIpAddress IpAddress,
daiLogSrcMacAddress MacAddress,
daiLogDestMacAddress MacAddress
}
daiLogIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the index of dynamic ARP
inspection log information."
::= { daiLogEntry 1 }
daiLogVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the VLAN ID of dynamic ARP
inspection log information."
::= { daiLogEntry 2 }
daiLogPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the ifIndex of dynamic ARP
inspection log information."
::= { daiLogEntry 3 }
daiLogSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The source IP address of dynamic ARP inspection
log information."
::= { daiLogEntry 4 }
daiLogDestIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The destination IP address of dynamic ARP inspection
log information."
::= { daiLogEntry 5 }
daiLogSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The source MAC address of dynamic ARP inspection
log information."
::= { daiLogEntry 6 }
daiLogDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The destination MAC address of dynamic ARP inspection
log information."
::= { daiLogEntry 7 }
daiTotalReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets received
before rate limiting."
::= { daiStatistics 1 }
daiTotalDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
due to rate limt."
::= { daiStatistics 2 }
daiTotalProcessedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets processed
by ARP inspection."
::= { daiStatistics 3 }
daiTotalSrcMacDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by source MAC address validation."
::= { daiStatistics 4 }
daiTotalDestMacDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by destination MAC address validation."
::= { daiStatistics 5 }
daiTotalIpAddrDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by IP address validation."
::= { daiStatistics 6 }
daiTotalArpAclDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by ARP ACL."
::= { daiStatistics 7 }
daiTotalDhcpSnoopingDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by DHCP snooping."
::= { daiStatistics 8 }
--
-- trap definitions
--
es3528Traps OBJECT IDENTIFIER ::= { es3528Notifications 1 }
es3528TrapsPrefix OBJECT IDENTIFIER ::= { es3528Traps 0 }
swPowerStatusChangeTrap NOTIFICATION-TYPE
OBJECTS { swIndivPowerUnitIndex, swIndivPowerIndex, swIndivPowerStatus }
STATUS current
DESCRIPTION "This trap is sent when the power state changes."
::= { es3528TrapsPrefix 1 }
swFanFailureTrap NOTIFICATION-TYPE
OBJECTS { switchUnitIndex, switchFanIndex }
STATUS current
DESCRIPTION "This trap is sent when the fan is failure."
::= { es3528TrapsPrefix 17 }
swFanRecoverTrap NOTIFICATION-TYPE
OBJECTS { switchUnitIndex, switchFanIndex }
STATUS current
DESCRIPTION "This trap is sent when fan failure has recovered."
::= { es3528TrapsPrefix 18 }
swPortSecurityTrap NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION "This trap is sent when the port is being intruded. This trap
will only be sent when the portSecActionTrap is enabled."
::= { es3528TrapsPrefix 36 }
swIpFilterRejectTrap NOTIFICATION-TYPE
OBJECTS { trapIpFilterRejectMode, trapIpFilterRejectIp }
STATUS current
DESCRIPTION "This trap is sent when an incorrect IP address is rejected by
the ipfilter."
::= { es3528TrapsPrefix 40 }
swSmtpConnFailureTrap NOTIFICATION-TYPE
OBJECTS { smtpServerIp }
STATUS current
DESCRIPTION "This trap is triggered if the SMTP system
cannot open a connection to the mail server successfully."
::= { es3528TrapsPrefix 41 }
swMainBoardVerMismatchNotificaiton NOTIFICATION-TYPE
OBJECTS { swOpCodeVer, swOpCodeVer}
STATUS current
DESCRIPTION
"This trap is sent when the slave version is mismatch with the
master version. This trap will binds two object, the first object
indicate the master version, whereas the second represent the
slave version. "
::= { es3528TrapsPrefix 56 }
swModuleVerMismatchNotificaiton NOTIFICATION-TYPE
OBJECTS { swExpectedModuleOpCodeVer, swModuleOpCodeVer }
STATUS current
DESCRIPTION
"This trap is sent when the module version is mismatch with the
main board version. "
::= { es3528TrapsPrefix 57 }
swThermalRisingNotification NOTIFICATION-TYPE
OBJECTS { switchThermalTempValue, switchThermalActionRisingThreshold }
STATUS current
DESCRIPTION
"This trap is sent when the temperature is over the
switchThermalActionRisingThreshold."
::= { es3528TrapsPrefix 58 }
swThermalFallingNotification NOTIFICATION-TYPE
OBJECTS { switchThermalTempValue, switchThermalActionFallingThreshold }
STATUS current
DESCRIPTION
"This trap is sent when the temperature is below the
switchThermalActionFallingThreshold."
::= { es3528TrapsPrefix 59 }
swModuleInsertionNotificaiton NOTIFICATION-TYPE
OBJECTS { swModuleOpCodeVer}
STATUS current
DESCRIPTION
"This trap is sent when the module is inserted."
::= { es3528TrapsPrefix 60 }
swModuleRemovalNotificaiton NOTIFICATION-TYPE
OBJECTS { swModuleOpCodeVer }
STATUS current
DESCRIPTION
"This trap is sent when the module is removed."
::= { es3528TrapsPrefix 61 }
--
-- Major/Minor Alarm
--
swMajorAlarm NOTIFICATION-TYPE
OBJECTS { alarmMajorType }
STATUS current
DESCRIPTION "This trap is fired when the major alarm event occured."
::= { es3528TrapsPrefix 78 }
swMinorAlarm NOTIFICATION-TYPE
OBJECTS { alarmMinorType }
STATUS current
DESCRIPTION "This trap is fired when the minor alarm event occured."
::= { es3528TrapsPrefix 79 }
swAlarmInput NOTIFICATION-TYPE
OBJECTS { alarmInputType }
STATUS current
DESCRIPTION "This trap is fired when the alarm input event occured."
::= { es3528TrapsPrefix 90 }
dot1agCfmMepUpTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepDbRMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a new remote MEP is discovered."
::= { es3528TrapsPrefix 97 }
dot1agCfmMepDownTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepDbRMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when received port status or interface
status TLV from remote MEP is not up."
::= { es3528TrapsPrefix 98 }
dot1agCfmConfigFailTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a MEP receives a CCM with MPID
which already exists on the same MA in this switch."
::= { es3528TrapsPrefix 99 }
dot1agCfmLoopFindTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a MEP receives its own CCMs."
::= { es3528TrapsPrefix 100 }
dot1agCfmMepUnknownTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a CCM is received from
an unexpected MEP."
::= { es3528TrapsPrefix 101 }
dot1agCfmMepMissingTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepDbRMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when the cross-check enable timer expires
and no CCMs were received from an expected (configured) MEP."
::= { es3528TrapsPrefix 102 }
dot1agCfmMaUpTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMaIndex
}
STATUS current
DESCRIPTION "This trap is sent when all expected remote MEPs are up."
::= { es3528TrapsPrefix 103 }
autoUpgradeTrap NOTIFICATION-TYPE
OBJECTS {
fileCopyFileType,
trapAutoUpgradeResult,
trapAutoUpgradeNewVer
}
STATUS current
DESCRIPTION "This trap is sent when auto upgrade is executed."
::= { es3528TrapsPrefix 104 }
swCpuUtiRisingNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the CPU utilization crossed
cpuUtiRisingThreshold."
::= { es3528TrapsPrefix 107 }
swCpuUtiFallingNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the CPU utilization crossed
cpuUtiFallingThreshold."
::= { es3528TrapsPrefix 108 }
swMemoryUtiRisingThresholdNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the memory utilization crossed
memoryUtiRisingThreshold."
::= { es3528TrapsPrefix 109 }
swMemoryUtiFallingThresholdNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the memory utilization crossed
memoryUtiFallingThreshold."
::= { es3528TrapsPrefix 110 }
END
View Git Blame Copy Permalink