1525 lines
60 KiB
Plaintext
1525 lines
60 KiB
Plaintext
-- *****************************************************************
|
|
-- LLDPMED-MIB: ME1200 Private MIB
|
|
--
|
|
--
|
|
-- ****************************************************************
|
|
|
|
ME1200-LLDPMED-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MODULE-IDENTITY, OBJECT-TYPE
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
me1200SwitchMgmt
|
|
FROM CISCOME1200-MIB
|
|
ME1200DisplayString FROM ME1200-TC
|
|
ME1200Integer64 FROM ME1200-TC
|
|
ME1200InterfaceIndex FROM ME1200-TC
|
|
ME1200RowEditorState FROM ME1200-TC
|
|
ME1200Unsigned16 FROM ME1200-TC
|
|
ME1200Unsigned8 FROM ME1200-TC
|
|
Integer32 FROM SNMPv2-SMI
|
|
TruthValue FROM SNMPv2-TC
|
|
;
|
|
|
|
me1200LldpmedMib MODULE-IDENTITY
|
|
LAST-UPDATED "201310080000Z"
|
|
ORGANIZATION
|
|
"Cisco Systems, Inc"
|
|
CONTACT-INFO
|
|
"Cisco Systems, Inc
|
|
Customer Service
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
E-mail: cs-me1200@cisco.com"
|
|
DESCRIPTION
|
|
"This is a private version of the LLDPMED MIB"
|
|
REVISION "201310080000Z"
|
|
DESCRIPTION
|
|
"Initial version"
|
|
::= { me1200SwitchMgmt 71 }
|
|
|
|
|
|
ME1200lldpmedAltitudeType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enumerations the altitude type."
|
|
SYNTAX INTEGER { meters(1), floor(2) }
|
|
|
|
ME1200lldpmedDatumType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enumerations the datum (geodetic system)."
|
|
SYNTAX INTEGER { wgs84(1), nad83navd88(2), nad83mllw(3) }
|
|
|
|
ME1200lldpmedDeviceType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enumerations the device type that the device shall operate as."
|
|
SYNTAX INTEGER { connectivity(0), endpoint(1) }
|
|
|
|
ME1200lldpmedRemoteDeviceType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enumerations the remote neighbor's device type."
|
|
SYNTAX INTEGER { notDefined(0), endpointClassI(1), endpointClassII(2), endpointClassIII(3), networkConnectivity(4), reserved(5) }
|
|
|
|
ME1200lldpmedRemoteNetworkPolicyApplicationType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enumerations the remote neighbor's network policy's application
|
|
type."
|
|
SYNTAX INTEGER { voice(1), voiceSignaling(2), guestVoice(3), gustVoiceSignaling(4), softphoneVoice(5), videoConferencing(6), streamingVideo(7), videoSignaling(8) }
|
|
|
|
me1200LldpmedMibObjects OBJECT IDENTIFIER
|
|
::= { me1200LldpmedMib 1 }
|
|
|
|
me1200LldpmedConfig OBJECT IDENTIFIER
|
|
::= { me1200LldpmedMibObjects 2 }
|
|
|
|
me1200LldpmedConfigGlobal OBJECT IDENTIFIER
|
|
::= { me1200LldpmedConfig 1 }
|
|
|
|
me1200LldpmedConfigGlobalFastRepeatCount OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned8 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times to repeat LLDP frame transmission at fast start
|
|
|
|
Rapid startup and Emergency Call Service Location Identification
|
|
Discovery of endpoints is a critically important aspect of VoIP systems
|
|
in general. In addition, it is best to advertise only those pieces of
|
|
information which are specifically relevant to particular endpoint
|
|
types (for example only advertise the voice network policy to permitted
|
|
voice-capable devices), both in order to conserve the limited LLDPU
|
|
space and to reduce security and system integrity issues that can come
|
|
with inappropriate knowledge of the network policy.
|
|
|
|
With this in mind LLDP-MED defines an LLDP-MED Fast Start interaction
|
|
between the protocol and the application layers on top of the protocol,
|
|
in order to achieve these related properties. Initially, a Network
|
|
Connectivity Device will only transmit LLDP TLVs in an LLDPDU. Only
|
|
after an LLDP-MED Endpoint Device is detected, will an LLDP-MED capable
|
|
Network Connectivity Device start to advertise LLDP-MED TLVs in
|
|
outgoing LLDPDUs on the associated port. The LLDP-MED application will
|
|
temporarily speed up the transmission of the LLDPDU to start within a
|
|
second, when a new LLDP-MED neighbor has been detected in order share
|
|
LLDP-MED information as fast as possible to new neighbors.
|
|
|
|
Because there is a risk of an LLDP frame being lost during transmission
|
|
between neighbors, it is recommended to repeat the fast start
|
|
transmission multiple times to increase the possibility of the
|
|
neighbors receiving the LLDP frame. With fast start repeat count it is
|
|
possible to specify the number of times the fast start transmission
|
|
would be repeated. The recommended value is 4 times, given that 4 LLDP
|
|
frames with a 1 second interval will be transmitted, when an LLDP frame
|
|
with new information is received.
|
|
|
|
It should be noted that LLDP-MED and the LLDP-MED Fast Start mechanism
|
|
is only intended to run on links between LLDP-MED Network Connectivity
|
|
Devices and Endpoint Devices, and as such does not apply to links
|
|
between LAN infrastructure elements, including Network Connectivity
|
|
Devices, or other types of links."
|
|
::= { me1200LldpmedConfigGlobal 1 }
|
|
|
|
me1200LldpmedConfigGlobalLatitude OBJECT-TYPE
|
|
SYNTAX ME1200Integer64
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Latitude degrees in 2s-complement as specified in RFC 3825. Positive
|
|
numbers are north of the equator and negative numbers are south of the
|
|
equator."
|
|
::= { me1200LldpmedConfigGlobal 2 }
|
|
|
|
me1200LldpmedConfigGlobalLongitude OBJECT-TYPE
|
|
SYNTAX ME1200Integer64
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Longitude degrees in 2s-complement as specified in RFC 3825. Positive
|
|
values are East of the prime meridian and negative numbers are West of
|
|
the prime meridian."
|
|
::= { me1200LldpmedConfigGlobal 3 }
|
|
|
|
me1200LldpmedConfigGlobalAltitudeType OBJECT-TYPE
|
|
SYNTAX ME1200lldpmedAltitudeType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting altitude type
|
|
|
|
Possible to select between two altitude types (floors or meters).
|
|
Meters are representing meters of altitude defined by the vertical
|
|
datum specified. Floors are representing altitude in a form more
|
|
relevant in buildings which have different floor-to-floor dimensions.
|
|
An altitude = 0.0 is meaningful even outside a building, and represents
|
|
ground level at the given latitude and longitude. Inside a building,
|
|
0.0 represents the floor level associated with ground level at the main
|
|
entrance."
|
|
::= { me1200LldpmedConfigGlobal 4 }
|
|
|
|
me1200LldpmedConfigGlobalAltitude OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Altitude value in 2s-complement as specified in RFC 3825"
|
|
::= { me1200LldpmedConfigGlobal 5 }
|
|
|
|
me1200LldpmedConfigGlobalElinAddr OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..25))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Emergency Call Service ELIN identifier data format is defined to carry
|
|
the ELIN identifier as used during emergency call setup to a
|
|
traditional CAMA or ISDN trunk-based PSAP. This format consists of a
|
|
numerical digit string, corresponding to the ELIN to be used for
|
|
emergency calling. Maximum number of octets are 25."
|
|
::= { me1200LldpmedConfigGlobal 6 }
|
|
|
|
me1200LldpmedConfigGlobalDatum OBJECT-TYPE
|
|
SYNTAX ME1200lldpmedDatumType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting datum to configure the datum (geodetic system) to use.
|
|
|
|
The Map Datum is used for the coordinates given in these options:
|
|
|
|
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
|
|
Prime Meridian Name: Greenwich.
|
|
|
|
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian
|
|
Name: Greenwich;The associated vertical datum is the North American
|
|
Vertical Datum of 1988 (NAVD88).This datum pair is to be used when
|
|
referencing locations on land, not near tidal water(which would use
|
|
Datum = NAD83/MLLW).
|
|
|
|
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian
|
|
Name: Greenwich; The associated vertical datum is Mean Lower Low Water
|
|
(MLLW). This datum pair is to be used when referencing locations on
|
|
water/sea/ocean."
|
|
::= { me1200LldpmedConfigGlobal 7 }
|
|
|
|
me1200LldpmedConfigLocationInformation OBJECT IDENTIFIER
|
|
::= { me1200LldpmedConfig 2 }
|
|
|
|
me1200LldpmedConfigLocationInformationState OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"National subdivision"
|
|
::= { me1200LldpmedConfigLocationInformation 1 }
|
|
|
|
me1200LldpmedConfigLocationInformationCounty OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"County"
|
|
::= { me1200LldpmedConfigLocationInformation 2 }
|
|
|
|
me1200LldpmedConfigLocationInformationCity OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"City"
|
|
::= { me1200LldpmedConfigLocationInformation 3 }
|
|
|
|
me1200LldpmedConfigLocationInformationCityDistrict OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"City district"
|
|
::= { me1200LldpmedConfigLocationInformation 4 }
|
|
|
|
me1200LldpmedConfigLocationInformationBlock OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Block (Neighborhood)"
|
|
::= { me1200LldpmedConfigLocationInformation 5 }
|
|
|
|
me1200LldpmedConfigLocationInformationStreet OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Street"
|
|
::= { me1200LldpmedConfigLocationInformation 6 }
|
|
|
|
me1200LldpmedConfigLocationInformationLeadingStreetDirection OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Street Direction"
|
|
::= { me1200LldpmedConfigLocationInformation 7 }
|
|
|
|
me1200LldpmedConfigLocationInformationTrailingStreetSuffix OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trailling Street"
|
|
::= { me1200LldpmedConfigLocationInformation 8 }
|
|
|
|
me1200LldpmedConfigLocationInformationStreetSuffix OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Street Suffix"
|
|
::= { me1200LldpmedConfigLocationInformation 9 }
|
|
|
|
me1200LldpmedConfigLocationInformationHouseNo OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"House No."
|
|
::= { me1200LldpmedConfigLocationInformation 10 }
|
|
|
|
me1200LldpmedConfigLocationInformationHouseNoSuffix OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"House No. Suffix"
|
|
::= { me1200LldpmedConfigLocationInformation 11 }
|
|
|
|
me1200LldpmedConfigLocationInformationLandmark OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Landmark"
|
|
::= { me1200LldpmedConfigLocationInformation 12 }
|
|
|
|
me1200LldpmedConfigLocationInformationAdditionalInfo OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Additional Location Info"
|
|
::= { me1200LldpmedConfigLocationInformation 13 }
|
|
|
|
me1200LldpmedConfigLocationInformationName OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name"
|
|
::= { me1200LldpmedConfigLocationInformation 14 }
|
|
|
|
me1200LldpmedConfigLocationInformationZipCode OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zip Code"
|
|
::= { me1200LldpmedConfigLocationInformation 15 }
|
|
|
|
me1200LldpmedConfigLocationInformationBuilding OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Building"
|
|
::= { me1200LldpmedConfigLocationInformation 16 }
|
|
|
|
me1200LldpmedConfigLocationInformationApartment OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unit"
|
|
::= { me1200LldpmedConfigLocationInformation 17 }
|
|
|
|
me1200LldpmedConfigLocationInformationFloor OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Floor"
|
|
::= { me1200LldpmedConfigLocationInformation 18 }
|
|
|
|
me1200LldpmedConfigLocationInformationRoomNumber OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Room No."
|
|
::= { me1200LldpmedConfigLocationInformation 19 }
|
|
|
|
me1200LldpmedConfigLocationInformationPlaceType OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Placetype"
|
|
::= { me1200LldpmedConfigLocationInformation 20 }
|
|
|
|
me1200LldpmedConfigLocationInformationPostalCommunityName OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Postal Community Name"
|
|
::= { me1200LldpmedConfigLocationInformation 21 }
|
|
|
|
me1200LldpmedConfigLocationInformationPoBox OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"P.O. Box"
|
|
::= { me1200LldpmedConfigLocationInformation 22 }
|
|
|
|
me1200LldpmedConfigLocationInformationAdditionalCode OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Addination Code"
|
|
::= { me1200LldpmedConfigLocationInformation 23 }
|
|
|
|
me1200LldpmedConfigLocationInformationCountryCode OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..2))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The two-letter ISO 3166 country code in capital ASCII letters -
|
|
Example: DK, DE or US."
|
|
::= { me1200LldpmedConfigLocationInformation 24 }
|
|
|
|
me1200LldpmedConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ME1200LldpmedConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table to configure LLDP MEDIA configurations for a specific
|
|
interface."
|
|
::= { me1200LldpmedConfig 3 }
|
|
|
|
me1200LldpmedConfigEntry OBJECT-TYPE
|
|
SYNTAX ME1200LldpmedConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each port has a set of control parameters"
|
|
INDEX { me1200LldpmedConfigIfIndex }
|
|
::= { me1200LldpmedConfigTable 1 }
|
|
|
|
ME1200LldpmedConfigEntry ::= SEQUENCE {
|
|
me1200LldpmedConfigIfIndex ME1200InterfaceIndex,
|
|
me1200LldpmedConfigOptionalTlvs ME1200Unsigned8,
|
|
me1200LldpmedConfigDeviceType ME1200lldpmedDeviceType
|
|
}
|
|
|
|
me1200LldpmedConfigIfIndex OBJECT-TYPE
|
|
SYNTAX ME1200InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Logical interface number."
|
|
::= { me1200LldpmedConfigEntry 1 }
|
|
|
|
me1200LldpmedConfigOptionalTlvs OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned8 (0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/Disables the LLDP optional TLVs. Bit mask, where setting the
|
|
bit(1) to 1 means enable the optional TLV.
|
|
|
|
Bit 0 represents the capabilities TLV.
|
|
|
|
Bit 1 represents the network Policy TLV.
|
|
|
|
Bit 2 represents the location TLV.
|
|
|
|
Bit 3 represents the PoE TLV."
|
|
::= { me1200LldpmedConfigEntry 3 }
|
|
|
|
me1200LldpmedConfigDeviceType OBJECT-TYPE
|
|
SYNTAX ME1200lldpmedDeviceType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting device type to configure the mode the device shall operate as."
|
|
::= { me1200LldpmedConfigEntry 4 }
|
|
|
|
me1200LldpmedConfigPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ME1200LldpmedConfigPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table to configure LLDP MED Policies for the device."
|
|
::= { me1200LldpmedConfig 4 }
|
|
|
|
me1200LldpmedConfigPolicyEntry OBJECT-TYPE
|
|
SYNTAX ME1200LldpmedConfigPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Policy Discovery enables the efficient discovery and diagnosis
|
|
of mismatch issues with the VLAN configuration, along with the
|
|
associated Layer 2 and Layer 3 attributes, which apply for a set of
|
|
specific protocol applications on that port. Improper network policy
|
|
configurations are a very significant issue in VoIP environments that
|
|
frequently result in voice quality degradation or loss of service.
|
|
Policies are only intended for use with applications that have specific
|
|
'real-time' network policy requirements, such as interactive voice
|
|
and/or video services."
|
|
INDEX { me1200LldpmedConfigPolicyLldpmedPolicy }
|
|
::= { me1200LldpmedConfigPolicyTable 1 }
|
|
|
|
ME1200LldpmedConfigPolicyEntry ::= SEQUENCE {
|
|
me1200LldpmedConfigPolicyLldpmedPolicy Integer32,
|
|
me1200LldpmedConfigPolicyApplicationType ME1200lldpmedRemoteNetworkPolicyApplicationType,
|
|
me1200LldpmedConfigPolicyTagged TruthValue,
|
|
me1200LldpmedConfigPolicyVlanId ME1200Unsigned16,
|
|
me1200LldpmedConfigPolicyL2Priority ME1200Unsigned8,
|
|
me1200LldpmedConfigPolicyDscp ME1200Unsigned8,
|
|
me1200LldpmedConfigPolicyAction ME1200RowEditorState
|
|
}
|
|
|
|
me1200LldpmedConfigPolicyLldpmedPolicy OBJECT-TYPE
|
|
SYNTAX Integer32 (0..31)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Policy index."
|
|
::= { me1200LldpmedConfigPolicyEntry 1 }
|
|
|
|
me1200LldpmedConfigPolicyApplicationType OBJECT-TYPE
|
|
SYNTAX ME1200lldpmedRemoteNetworkPolicyApplicationType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LLDP policy application type."
|
|
::= { me1200LldpmedConfigPolicyEntry 2 }
|
|
|
|
me1200LldpmedConfigPolicyTagged OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines if LLDP policy uses tagged VLAN."
|
|
::= { me1200LldpmedConfigPolicyEntry 3 }
|
|
|
|
me1200LldpmedConfigPolicyVlanId OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned16 (1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The policy VLAN ID. Only valid when policy 'Tagged' is TRUE."
|
|
::= { me1200LldpmedConfigPolicyEntry 4 }
|
|
|
|
me1200LldpmedConfigPolicyL2Priority OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned8 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's policy L2 priority. Only valid when policy
|
|
'Tagged' is TRUE."
|
|
::= { me1200LldpmedConfigPolicyEntry 5 }
|
|
|
|
me1200LldpmedConfigPolicyDscp OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned8 (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP policy DSCP."
|
|
::= { me1200LldpmedConfigPolicyEntry 6 }
|
|
|
|
me1200LldpmedConfigPolicyAction OBJECT-TYPE
|
|
SYNTAX ME1200RowEditorState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action"
|
|
::= { me1200LldpmedConfigPolicyEntry 100 }
|
|
|
|
me1200LldpmedConfigPolicyListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ME1200LldpmedConfigPolicyListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each interface can be mapped to multiple policies. Set to TRUE in order
|
|
to enable the corresponding policy to be transmitted at the interface.
|
|
It is a requirement that the policy is defined."
|
|
::= { me1200LldpmedConfig 5 }
|
|
|
|
me1200LldpmedConfigPolicyListEntry OBJECT-TYPE
|
|
SYNTAX ME1200LldpmedConfigPolicyListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each location information has a control parameter"
|
|
INDEX { me1200LldpmedConfigPolicyListIfIndex, me1200LldpmedConfigPolicyListPolicyIndex }
|
|
::= { me1200LldpmedConfigPolicyListTable 1 }
|
|
|
|
ME1200LldpmedConfigPolicyListEntry ::= SEQUENCE {
|
|
me1200LldpmedConfigPolicyListIfIndex ME1200InterfaceIndex,
|
|
me1200LldpmedConfigPolicyListPolicyIndex Integer32,
|
|
me1200LldpmedConfigPolicyListLldpmedPoliciesList TruthValue
|
|
}
|
|
|
|
me1200LldpmedConfigPolicyListIfIndex OBJECT-TYPE
|
|
SYNTAX ME1200InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Logical interface number."
|
|
::= { me1200LldpmedConfigPolicyListEntry 1 }
|
|
|
|
me1200LldpmedConfigPolicyListPolicyIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Logical Policy index."
|
|
::= { me1200LldpmedConfigPolicyListEntry 2 }
|
|
|
|
me1200LldpmedConfigPolicyListLldpmedPoliciesList OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set to TRUE assign the corresponding policy index to the interface."
|
|
::= { me1200LldpmedConfigPolicyListEntry 3 }
|
|
|
|
me1200LldpmedConfigPolicyRowEditor OBJECT IDENTIFIER
|
|
::= { me1200LldpmedConfig 6 }
|
|
|
|
me1200LldpmedConfigPolicyRowEditorLldpmedPolicy OBJECT-TYPE
|
|
SYNTAX Integer32 (0..31)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Policy index."
|
|
::= { me1200LldpmedConfigPolicyRowEditor 1 }
|
|
|
|
me1200LldpmedConfigPolicyRowEditorApplicationType OBJECT-TYPE
|
|
SYNTAX ME1200lldpmedRemoteNetworkPolicyApplicationType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LLDP policy application type."
|
|
::= { me1200LldpmedConfigPolicyRowEditor 2 }
|
|
|
|
me1200LldpmedConfigPolicyRowEditorTagged OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines if LLDP policy uses tagged VLAN."
|
|
::= { me1200LldpmedConfigPolicyRowEditor 3 }
|
|
|
|
me1200LldpmedConfigPolicyRowEditorVlanId OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned16 (1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The policy VLAN ID. Only valid when policy 'Tagged' is TRUE."
|
|
::= { me1200LldpmedConfigPolicyRowEditor 4 }
|
|
|
|
me1200LldpmedConfigPolicyRowEditorL2Priority OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned8 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's policy L2 priority. Only valid when policy
|
|
'Tagged' is TRUE."
|
|
::= { me1200LldpmedConfigPolicyRowEditor 5 }
|
|
|
|
me1200LldpmedConfigPolicyRowEditorDscp OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned8 (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP policy DSCP."
|
|
::= { me1200LldpmedConfigPolicyRowEditor 6 }
|
|
|
|
me1200LldpmedConfigPolicyRowEditorAction OBJECT-TYPE
|
|
SYNTAX ME1200RowEditorState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action"
|
|
::= { me1200LldpmedConfigPolicyRowEditor 100 }
|
|
|
|
me1200LldpmedStatus OBJECT IDENTIFIER
|
|
::= { me1200LldpmedMibObjects 3 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ME1200LldpmedStatusRemoteDeviceInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table to show the LLDP-MED remote device (neighbor)
|
|
information for a specific interface."
|
|
::= { me1200LldpmedStatus 3 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoEntry OBJECT-TYPE
|
|
SYNTAX ME1200LldpmedStatusRemoteDeviceInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each port has a set of neighbor's information"
|
|
INDEX { me1200LldpmedStatusRemoteDeviceInfoIfIndex, me1200LldpmedStatusRemoteDeviceInfoLldpmedIndex }
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoTable 1 }
|
|
|
|
ME1200LldpmedStatusRemoteDeviceInfoEntry ::= SEQUENCE {
|
|
me1200LldpmedStatusRemoteDeviceInfoIfIndex ME1200InterfaceIndex,
|
|
me1200LldpmedStatusRemoteDeviceInfoLldpmedIndex Integer32,
|
|
me1200LldpmedStatusRemoteDeviceInfoCapabilities ME1200Unsigned16,
|
|
me1200LldpmedStatusRemoteDeviceInfoCapabilitiesEnabled ME1200Unsigned16,
|
|
me1200LldpmedStatusRemoteDeviceInfoLatitude ME1200Integer64,
|
|
me1200LldpmedStatusRemoteDeviceInfoLongitude ME1200Integer64,
|
|
me1200LldpmedStatusRemoteDeviceInfoAltitudeType ME1200lldpmedAltitudeType,
|
|
me1200LldpmedStatusRemoteDeviceInfoAltitude Integer32,
|
|
me1200LldpmedStatusRemoteDeviceInfoDatum ME1200lldpmedDatumType,
|
|
me1200LldpmedStatusRemoteDeviceInfoElinAddr ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceInfoDeviceType ME1200lldpmedRemoteDeviceType,
|
|
me1200LldpmedStatusRemoteDeviceInfoHwRev ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceInfoFwRev ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceInfoSwRev ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceInfoSerialNo ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceInfoManufacturerName ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceInfoModelName ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceInfoAssetId ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSys ME1200Unsigned16,
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSys ME1200Unsigned16,
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeFbTwSys ME1200Unsigned16,
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSysEcho ME1200Unsigned16,
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSysEcho ME1200Unsigned16
|
|
}
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoIfIndex OBJECT-TYPE
|
|
SYNTAX ME1200InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Logical interface number."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 1 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoLldpmedIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..192)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Neighbor information table entry index."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 2 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoCapabilities OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned16
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP neighbor's capabilities bit mask.
|
|
|
|
Bit 0 represents LLDP-MED capabilities.
|
|
|
|
Bit 1 represents Network Policy.
|
|
|
|
Bit 2 represents Location Identification.
|
|
|
|
Bit 3 represents Extended Power via MDI - PSE.
|
|
|
|
Bit 4 represents Extended Power via MDI - PD
|
|
|
|
Bit 5 represents Inventory
|
|
|
|
"
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 4 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoCapabilitiesEnabled OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned16
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP neighbor's capabilities bit mask for the capabilities which are
|
|
currently enabled.
|
|
|
|
Bit 0 represents LLDP-MED capabilities.
|
|
|
|
Bit 1 represents Network Policy.
|
|
|
|
Bit 2 represents Location Identification.
|
|
|
|
Bit 3 represents Extended Power via MDI - PSE.
|
|
|
|
Bit 4 represents Extended Power via MDI - PD
|
|
|
|
Bit 5 represents Inventory
|
|
|
|
"
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 5 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoLatitude OBJECT-TYPE
|
|
SYNTAX ME1200Integer64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Latitude degrees in 2s-complement as specified in RFC 3825. Positive
|
|
numbers are north of the equator and negative numbers are south of the
|
|
equator."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 6 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoLongitude OBJECT-TYPE
|
|
SYNTAX ME1200Integer64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Longitude degrees in 2s-complement as specified in RFC 3825. Positive
|
|
values are East of the prime meridian and negative numbers are West of
|
|
the prime meridian."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 7 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoAltitudeType OBJECT-TYPE
|
|
SYNTAX ME1200lldpmedAltitudeType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Altitude type as either floors or meters. Meters are representing
|
|
meters of altitude defined by the vertical datum specified. Floors are
|
|
representing altitude in a form more relevant in buildings which have
|
|
different floor-to-floor dimensions. An altitude = 0.0 is meaningful
|
|
even outside a building, and represents ground level at the given
|
|
latitude and longitude. Inside a building, 0.0 represents the floor
|
|
level associated with ground level at the main entrance."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 8 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoAltitude OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Altitude value in 2s-complement as specified in RFC 3825"
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 9 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoDatum OBJECT-TYPE
|
|
SYNTAX ME1200lldpmedDatumType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Datum (geodetic system) .
|
|
|
|
The Map Datum is used for the coordinates given in these options:
|
|
|
|
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
|
|
Prime Meridian Name: Greenwich.
|
|
|
|
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian
|
|
Name: Greenwich; The associated vertical datum is the North American
|
|
Vertical Datum of 1988 (NAVD88). This datum pair is to be used when
|
|
referencing locations on land, not near tidal water(which would use
|
|
Datum = NAD83/MLLW).
|
|
|
|
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian
|
|
Name: Greenwich; The associated vertical datum is Mean Lower Low Water
|
|
(MLLW). This datum pair is to be used when referencing locations on
|
|
water/sea/ocean."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 10 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoElinAddr OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..25))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Emergency Call Service ELIN identifier data format is defined to carry
|
|
the ELIN identifier as used during emergency call setup to a
|
|
traditional CAMA or ISDN trunk-based PSAP. This format consists of a
|
|
numerical digit string, corresponding to the ELIN to be used for
|
|
emergency calling. Maximum number of octets are 25."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 12 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoDeviceType OBJECT-TYPE
|
|
SYNTAX ME1200lldpmedRemoteDeviceType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's device type."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 13 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoHwRev OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's hardware revision."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 14 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoFwRev OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's firmware revision."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 15 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoSwRev OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's software revision."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 16 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoSerialNo OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's serial number."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 17 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoManufacturerName OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's manufacturer name."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 18 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoModelName OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's model name."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 19 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoAssetId OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's asset id."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 20 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSys OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned16
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as
|
|
the time (expressed in microseconds) that the transmitting link partner
|
|
will wait before it starts transmitting data after leaving the Low
|
|
Power Idle (LPI) mode. Section 79.3.5.2, IEEE802.3az."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 21 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSys OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned16
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as
|
|
the time (expressed in microseconds) that the receiving link partner is
|
|
requesting the transmitting link partner to wait before starting the
|
|
transmission data following the Low Power Idle (LPI) mode. Section
|
|
79.3.5.1, IEEE802.3az."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 22 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeFbTwSys OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned16
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner
|
|
may inform the transmitter of an alternate desired Tw_sys_tx. Since a
|
|
receiving link partner is likely to have discrete levels for savings,
|
|
this provides the transmitter with additional information that it may
|
|
use for a more efficient allocation. Section 79.3.5.3, IEEE802.3az."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 23 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSysEcho OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned16
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's echo transmit Tw. The respective echo values
|
|
shall be defined as the local link partners reflection (echo) of the
|
|
remote link partners respective values. When a local link partner
|
|
receives its echoed values from the remote link partner it can
|
|
determine whether or not the remote link partner has received,
|
|
registered, and processed its most recent values. Section 79.3.5.4,
|
|
IEEE802.3az."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 24 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSysEcho OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned16
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's echo receive Tw. The respective echo values
|
|
shall be defined as the local link partners reflection (echo) of the
|
|
remote link partners respective values. When a local link partner
|
|
receives its echoed values from the remote link partner it can
|
|
determine whether or not the remote link partner has received,
|
|
registered, and processed its most recent values. Section 79.3.5.4,
|
|
IEEE802.3az."
|
|
::= { me1200LldpmedStatusRemoteDeviceInfoEntry 25 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ME1200LldpmedStatusRemoteDeviceLocInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table to show the LLDP-MED remote device (neighbor) civic
|
|
location information for a specific interface."
|
|
::= { me1200LldpmedStatus 4 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoEntry OBJECT-TYPE
|
|
SYNTAX ME1200LldpmedStatusRemoteDeviceLocInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each port has a set of neighbors information"
|
|
INDEX { me1200LldpmedStatusRemoteDeviceLocInfoIfIndex, me1200LldpmedStatusRemoteDeviceLocInfoLldpmedIndex }
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoTable 1 }
|
|
|
|
ME1200LldpmedStatusRemoteDeviceLocInfoEntry ::= SEQUENCE {
|
|
me1200LldpmedStatusRemoteDeviceLocInfoIfIndex ME1200InterfaceIndex,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoLldpmedIndex Integer32,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoState ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCounty ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCity ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCityDistrict ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoBlock ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoStreet ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoLeadingStreetDirection ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoTrailingStreetSuffix ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoStreetSuffix ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoHouseNo ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoHouseNoSuffix ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoLandmark ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoAdditionalInfo ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoName ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoZipCode ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoBuilding ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoApartment ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoFloor ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoRoomNumber ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoPlaceType ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoPostalCommunityName ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoPoBox ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoAdditionalCode ME1200DisplayString,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCountryCode ME1200DisplayString
|
|
}
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoIfIndex OBJECT-TYPE
|
|
SYNTAX ME1200InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Logical interface number."
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 1 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoLldpmedIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..192)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Neighbor information table entry index."
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 2 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoState OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"National subdivision"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 5 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCounty OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"County"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 6 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCity OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"City"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 7 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCityDistrict OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"City district"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 8 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoBlock OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Block (Neighborhood)"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 9 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoStreet OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Street"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 10 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoLeadingStreetDirection OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Street Direction"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 11 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoTrailingStreetSuffix OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trailling Street"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 12 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoStreetSuffix OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Street Suffix"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 13 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoHouseNo OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"House No."
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 14 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoHouseNoSuffix OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"House No. Suffix"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 15 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoLandmark OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Landmark"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 16 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoAdditionalInfo OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Additional Location Info"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 17 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoName OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 18 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoZipCode OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zip Code"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 19 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoBuilding OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Building"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 20 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoApartment OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unit"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 21 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoFloor OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Floor"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 22 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoRoomNumber OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Room No."
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 23 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoPlaceType OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Placetype"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 24 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoPostalCommunityName OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Postal Community Name"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 25 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoPoBox OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"P.O. Box"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 26 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoAdditionalCode OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..250))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Addination Code"
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 27 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCountryCode OBJECT-TYPE
|
|
SYNTAX ME1200DisplayString (SIZE(0..2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The two-letter ISO 3166 country code in capital ASCII letters -
|
|
Example: DK, DE or US."
|
|
::= { me1200LldpmedStatusRemoteDeviceLocInfoEntry 28 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ME1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a table to show the LLDP-MED remote device (neighbor) network
|
|
policies information for a specific interface."
|
|
::= { me1200LldpmedStatus 5 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry OBJECT-TYPE
|
|
SYNTAX ME1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each port has a set of neighbors information"
|
|
INDEX { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoIfIndex, me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoLldpmedIndex, me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoPolicyIndex }
|
|
::= { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTable 1 }
|
|
|
|
ME1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry ::= SEQUENCE {
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoIfIndex ME1200InterfaceIndex,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoLldpmedIndex Integer32,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoPolicyIndex Integer32,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoApplicationType ME1200lldpmedRemoteNetworkPolicyApplicationType,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoUnknownPolicy TruthValue,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTagged TruthValue,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoVlanId ME1200Unsigned16,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoL2Priority ME1200Unsigned8,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoDscp ME1200Unsigned8
|
|
}
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoIfIndex OBJECT-TYPE
|
|
SYNTAX ME1200InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Logical interface number."
|
|
::= { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry 1 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoLldpmedIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..192)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Neighbor information table entry index."
|
|
::= { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry 2 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoPolicyIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Logical Policy index."
|
|
::= { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry 3 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoApplicationType OBJECT-TYPE
|
|
SYNTAX ME1200lldpmedRemoteNetworkPolicyApplicationType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LLDP policy application type."
|
|
::= { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry 5 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoUnknownPolicy OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Policy indicates that an Endpoint Device wants to explicitly advertise
|
|
that the policy is required by the device. Can be either Defined or
|
|
Unknown
|
|
|
|
Unknown: The network policy for the specified application type is
|
|
currently unknown.
|
|
|
|
Defined: The network policy is defined (known)."
|
|
::= { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry 6 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTagged OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines if LLDP policy uses tagged VLAN."
|
|
::= { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry 7 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoVlanId OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned16 (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The policy VLAN ID. Only valid when policy 'Tagged' is TRUE."
|
|
::= { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry 8 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoL2Priority OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned8 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the LLDP neighbor's policy L2 priority. Only valid when policy
|
|
'Tagged' is TRUE."
|
|
::= { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry 9 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoDscp OBJECT-TYPE
|
|
SYNTAX ME1200Unsigned8 (0..63)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP policy DSCP."
|
|
::= { me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry 10 }
|
|
|
|
me1200LldpmedControl OBJECT IDENTIFIER
|
|
::= { me1200LldpmedMibObjects 4 }
|
|
|
|
me1200LldpmedMibConformance OBJECT IDENTIFIER
|
|
::= { me1200LldpmedMib 2 }
|
|
|
|
me1200LldpmedMibCompliances OBJECT IDENTIFIER
|
|
::= { me1200LldpmedMibConformance 1 }
|
|
|
|
me1200LldpmedMibGroups OBJECT IDENTIFIER
|
|
::= { me1200LldpmedMibConformance 2 }
|
|
|
|
me1200LldpmedConfigGlobalInfoGroup OBJECT-GROUP
|
|
OBJECTS { me1200LldpmedConfigGlobalFastRepeatCount,
|
|
me1200LldpmedConfigGlobalLatitude,
|
|
me1200LldpmedConfigGlobalLongitude,
|
|
me1200LldpmedConfigGlobalAltitudeType,
|
|
me1200LldpmedConfigGlobalAltitude,
|
|
me1200LldpmedConfigGlobalElinAddr, me1200LldpmedConfigGlobalDatum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects suitable for bulk operations."
|
|
::= { me1200LldpmedMibGroups 1 }
|
|
|
|
me1200LldpmedConfigLocationInformationInfoGroup OBJECT-GROUP
|
|
OBJECTS { me1200LldpmedConfigLocationInformationState,
|
|
me1200LldpmedConfigLocationInformationCounty,
|
|
me1200LldpmedConfigLocationInformationCity,
|
|
me1200LldpmedConfigLocationInformationCityDistrict,
|
|
me1200LldpmedConfigLocationInformationBlock,
|
|
me1200LldpmedConfigLocationInformationStreet,
|
|
me1200LldpmedConfigLocationInformationLeadingStreetDirection,
|
|
me1200LldpmedConfigLocationInformationTrailingStreetSuffix,
|
|
me1200LldpmedConfigLocationInformationStreetSuffix,
|
|
me1200LldpmedConfigLocationInformationHouseNo,
|
|
me1200LldpmedConfigLocationInformationHouseNoSuffix,
|
|
me1200LldpmedConfigLocationInformationLandmark,
|
|
me1200LldpmedConfigLocationInformationAdditionalInfo,
|
|
me1200LldpmedConfigLocationInformationName,
|
|
me1200LldpmedConfigLocationInformationZipCode,
|
|
me1200LldpmedConfigLocationInformationBuilding,
|
|
me1200LldpmedConfigLocationInformationApartment,
|
|
me1200LldpmedConfigLocationInformationFloor,
|
|
me1200LldpmedConfigLocationInformationRoomNumber,
|
|
me1200LldpmedConfigLocationInformationPlaceType,
|
|
me1200LldpmedConfigLocationInformationPostalCommunityName,
|
|
me1200LldpmedConfigLocationInformationPoBox,
|
|
me1200LldpmedConfigLocationInformationAdditionalCode,
|
|
me1200LldpmedConfigLocationInformationCountryCode }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects suitable for bulk operations."
|
|
::= { me1200LldpmedMibGroups 2 }
|
|
|
|
me1200LldpmedConfigInfoGroup OBJECT-GROUP
|
|
OBJECTS { me1200LldpmedConfigOptionalTlvs, me1200LldpmedConfigDeviceType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects suitable for bulk operations."
|
|
::= { me1200LldpmedMibGroups 3 }
|
|
|
|
me1200LldpmedConfigPolicyInfoGroup OBJECT-GROUP
|
|
OBJECTS { me1200LldpmedConfigPolicyApplicationType,
|
|
me1200LldpmedConfigPolicyTagged, me1200LldpmedConfigPolicyVlanId,
|
|
me1200LldpmedConfigPolicyL2Priority, me1200LldpmedConfigPolicyDscp,
|
|
me1200LldpmedConfigPolicyAction }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects suitable for bulk operations."
|
|
::= { me1200LldpmedMibGroups 4 }
|
|
|
|
me1200LldpmedConfigPolicyListInfoGroup OBJECT-GROUP
|
|
OBJECTS { me1200LldpmedConfigPolicyListLldpmedPoliciesList }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects suitable for bulk operations."
|
|
::= { me1200LldpmedMibGroups 5 }
|
|
|
|
me1200LldpmedConfigPolicyRowEditorInfoGroup OBJECT-GROUP
|
|
OBJECTS { me1200LldpmedConfigPolicyRowEditorLldpmedPolicy,
|
|
me1200LldpmedConfigPolicyRowEditorApplicationType,
|
|
me1200LldpmedConfigPolicyRowEditorTagged,
|
|
me1200LldpmedConfigPolicyRowEditorVlanId,
|
|
me1200LldpmedConfigPolicyRowEditorL2Priority,
|
|
me1200LldpmedConfigPolicyRowEditorDscp,
|
|
me1200LldpmedConfigPolicyRowEditorAction }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects suitable for bulk operations."
|
|
::= { me1200LldpmedMibGroups 6 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceInfoInfoGroup OBJECT-GROUP
|
|
OBJECTS { me1200LldpmedStatusRemoteDeviceInfoCapabilities,
|
|
me1200LldpmedStatusRemoteDeviceInfoCapabilitiesEnabled,
|
|
me1200LldpmedStatusRemoteDeviceInfoLatitude,
|
|
me1200LldpmedStatusRemoteDeviceInfoLongitude,
|
|
me1200LldpmedStatusRemoteDeviceInfoAltitudeType,
|
|
me1200LldpmedStatusRemoteDeviceInfoAltitude,
|
|
me1200LldpmedStatusRemoteDeviceInfoDatum,
|
|
me1200LldpmedStatusRemoteDeviceInfoElinAddr,
|
|
me1200LldpmedStatusRemoteDeviceInfoDeviceType,
|
|
me1200LldpmedStatusRemoteDeviceInfoHwRev,
|
|
me1200LldpmedStatusRemoteDeviceInfoFwRev,
|
|
me1200LldpmedStatusRemoteDeviceInfoSwRev,
|
|
me1200LldpmedStatusRemoteDeviceInfoSerialNo,
|
|
me1200LldpmedStatusRemoteDeviceInfoManufacturerName,
|
|
me1200LldpmedStatusRemoteDeviceInfoModelName,
|
|
me1200LldpmedStatusRemoteDeviceInfoAssetId,
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSys,
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSys,
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeFbTwSys,
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSysEcho,
|
|
me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSysEcho }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects suitable for bulk operations."
|
|
::= { me1200LldpmedMibGroups 7 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceLocInfoInfoGroup OBJECT-GROUP
|
|
OBJECTS { me1200LldpmedStatusRemoteDeviceLocInfoState,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCounty,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCity,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCityDistrict,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoBlock,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoStreet,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoLeadingStreetDirection,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoTrailingStreetSuffix,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoStreetSuffix,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoHouseNo,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoHouseNoSuffix,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoLandmark,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoAdditionalInfo,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoName,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoZipCode,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoBuilding,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoApartment,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoFloor,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoRoomNumber,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoPlaceType,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoPostalCommunityName,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoPoBox,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoAdditionalCode,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoCountryCode }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects suitable for bulk operations."
|
|
::= { me1200LldpmedMibGroups 8 }
|
|
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoApplicationType,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoUnknownPolicy,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTagged,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoVlanId,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoL2Priority,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoDscp }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects suitable for bulk operations."
|
|
::= { me1200LldpmedMibGroups 9 }
|
|
|
|
me1200LldpmedMibCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the implementation."
|
|
|
|
MODULE -- this module
|
|
|
|
MANDATORY-GROUPS { me1200LldpmedConfigGlobalInfoGroup,
|
|
me1200LldpmedConfigLocationInformationInfoGroup,
|
|
me1200LldpmedConfigInfoGroup, me1200LldpmedConfigPolicyInfoGroup,
|
|
me1200LldpmedConfigPolicyListInfoGroup,
|
|
me1200LldpmedConfigPolicyRowEditorInfoGroup,
|
|
me1200LldpmedStatusRemoteDeviceInfoInfoGroup,
|
|
me1200LldpmedStatusRemoteDeviceLocInfoInfoGroup,
|
|
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoInfoGroup }
|
|
|
|
::= { me1200LldpmedMibCompliances 1 }
|
|
|
|
END
|