WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/cisco/ME1200-ACL-MIB

2699 lines
107 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- ACL-MIB: ME1200 Private MIB
--
--
-- ****************************************************************
ME1200-ACL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
me1200SwitchMgmt
FROM CISCOME1200-MIB
InetAddressIPv6 FROM INET-ADDRESS-MIB
ME1200InterfaceIndex FROM ME1200-TC
ME1200PortList FROM ME1200-TC
ME1200RowEditorState FROM ME1200-TC
ME1200Unsigned16 FROM ME1200-TC
ME1200Unsigned8 FROM ME1200-TC
Integer32 FROM SNMPv2-SMI
IpAddress FROM SNMPv2-SMI
Unsigned32 FROM SNMPv2-SMI
MacAddress FROM SNMPv2-TC
TruthValue FROM SNMPv2-TC
;
me1200AclMIB MODULE-IDENTITY
LAST-UPDATED "201403110000Z"
ORGANIZATION
"Cisco Systems, Inc"
CONTACT-INFO
" "
DESCRIPTION
"This is a private MIB for ACL"
REVISION "201403110000Z"
DESCRIPTION
"Definition of type InterfaceIndex changed from Unsigned32 to Integer32
as it is used as index in some tables"
REVISION "201403070000Z"
DESCRIPTION
"Updated the maximum of ACL packet rate"
REVISION "201402180000Z"
DESCRIPTION
"Do no use Unsigned32 for indexes"
REVISION "201402060000Z"
DESCRIPTION
"Modified description of me1200AclInterfacePolicyId"
REVISION "201401290000Z"
DESCRIPTION
"Locate all objects under ciscoME1200MIB"
REVISION "201401230000Z"
DESCRIPTION
"Changed type of AclAceLookup from Unsigned8 to TruthValue"
REVISION "201311060000Z"
DESCRIPTION
"Initial version"
::= { me1200SwitchMgmt 17 }
ME1200ASRType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents an Any/Specific/Range selector."
SYNTAX INTEGER { any(0), specific(1), range(2) }
ME1200ASType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents an Any/Specific selector."
SYNTAX INTEGER { any(0), specific(1) }
ME1200AclAceFlagOpcode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ACL ACE flag opcode."
SYNTAX INTEGER { any(0), notequal(1), equal(2) }
ME1200AclAceHitAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The hit action of the ACE."
SYNTAX INTEGER { deny(0), permit(1), filter(2) }
ME1200AclAceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The frame type of the ACE."
SYNTAX INTEGER { any(0), etype(1), arp(4), ipv4(5), ipv6(6) }
ME1200AclInterfaceHitAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The hit action of the interface."
SYNTAX INTEGER { deny(0), permit(1) }
ME1200AclUser ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ACL user."
SYNTAX INTEGER { static(0), ipSourceGuard(1), ipmc(2), evc(3), mep(4), arpInspection(5), upnp(6), ptp(7), dhcp(8), loopProtect(9), linkOam(10), ztp(11), ttLoop(12), y1564(13) }
ME1200AdvDestMacType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a destination MAC type selector."
SYNTAX INTEGER { any(0), unicast(1), multicast(2), broadcast(3), specific(4) }
ME1200ArpOpcode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ARP opcode."
SYNTAX INTEGER { any(0), arp(1), rarp(2), other(3) }
ME1200DestMacType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a destination MAC type selector."
SYNTAX INTEGER { any(0), unicast(1), multicast(2), broadcast(3) }
ME1200VlanTagPriority ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"VLAN priority."
SYNTAX INTEGER { any(0), value0(1), value1(2), value2(3), value3(4), value4(5), value5(6), value6(7), value7(8), range0to1(9), range2to3(10), range4to5(11), range6to7(12), range0to3(13), range4to7(14) }
ME1200VlanTagged ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"VLAN tagged/untagged."
SYNTAX INTEGER { any(0), untagged(1), tagged(2) }
me1200AclMIBObjects OBJECT IDENTIFIER
::= { me1200AclMIB 1 }
me1200AclConfig OBJECT IDENTIFIER
::= { me1200AclMIBObjects 2 }
me1200AclGlobals OBJECT IDENTIFIER
::= { me1200AclConfig 1 }
me1200AclRateLimiterTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200AclRateLimiterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL rate limiter configuration table."
::= { me1200AclGlobals 1 }
me1200AclRateLimiterEntry OBJECT-TYPE
SYNTAX ME1200AclRateLimiterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each rate limiter ID has a set of parameters"
INDEX { me1200AclRateLimiterId }
::= { me1200AclRateLimiterTable 1 }
ME1200AclRateLimiterEntry ::= SEQUENCE {
me1200AclRateLimiterId Integer32,
me1200AclRateLimiterPacketRate Unsigned32,
me1200AclRateLimiterBitRate Unsigned32,
me1200AclRateLimiterBitRateEnable TruthValue
}
me1200AclRateLimiterId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identification of ACL rate limter."
::= { me1200AclRateLimiterEntry 1 }
me1200AclRateLimiterPacketRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet rate per second. The operation is inactive when bit rate
mode is enabled. Possible values are: 0-99, 100, 2*100, 3*100...,
1092000."
::= { me1200AclRateLimiterEntry 2 }
me1200AclRateLimiterBitRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit rate per second.The operation is inactive when bit rate mode is
disabled. Possible values are: 0, 100, 2*100, 3*100, ..., 1000000."
::= { me1200AclRateLimiterEntry 3 }
me1200AclRateLimiterBitRateEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable bit rate."
::= { me1200AclRateLimiterEntry 4 }
me1200AclAce OBJECT IDENTIFIER
::= { me1200AclGlobals 2 }
me1200AclAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200AclAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL ACE configuration table."
::= { me1200AclAce 1 }
me1200AclAceEntry OBJECT-TYPE
SYNTAX ME1200AclAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains a set of parameters."
INDEX { me1200AclAceId }
::= { me1200AclAceTable 1 }
ME1200AclAceEntry ::= SEQUENCE {
me1200AclAceId Integer32,
me1200AclAceNextAceId Unsigned32,
me1200AclAceLookup TruthValue,
me1200AclAceIngressPortList ME1200PortList,
me1200AclAcePolicyValue ME1200Unsigned8,
me1200AclAcePolicyMask ME1200Unsigned8,
me1200AclAceHitAction ME1200AclAceHitAction,
me1200AclAceFilterPortList ME1200PortList,
me1200AclAceRateLimiterId Unsigned32,
me1200AclAceEvcPolicerId ME1200Unsigned16,
me1200AclAceRedirectPortList ME1200PortList,
me1200AclAceMirror TruthValue,
me1200AclAceLogging TruthValue,
me1200AclAceShutdown TruthValue,
me1200AclAceVlanTagged ME1200VlanTagged,
me1200AclAceVlanId ME1200Unsigned16,
me1200AclAceVlanTagPriority ME1200VlanTagPriority,
me1200AclAceFrameType ME1200AclAceType,
me1200AclAceEtypeSrcMacOp ME1200ASType,
me1200AclAceEtypeSrcMac MacAddress,
me1200AclAceEtypeDestMacOp ME1200AdvDestMacType,
me1200AclAceEtypeDestMac MacAddress,
me1200AclAceEtype ME1200Unsigned16,
me1200AclAceArpSrcMacOp ME1200ASType,
me1200AclAceArpSrcMac MacAddress,
me1200AclAceArpDestMacOp ME1200DestMacType,
me1200AclAceArpSenderIp IpAddress,
me1200AclAceArpSenderIpMask IpAddress,
me1200AclAceArpTragetIp IpAddress,
me1200AclAceArpTragetIpMask IpAddress,
me1200AclAceArpOpcode ME1200ArpOpcode,
me1200AclAceArpFlagRequest ME1200AclAceFlagOpcode,
me1200AclAceArpFlagSenderMac ME1200AclAceFlagOpcode,
me1200AclAceArpFlagTargetMac ME1200AclAceFlagOpcode,
me1200AclAceArpFlagLen ME1200AclAceFlagOpcode,
me1200AclAceArpFlagIp ME1200AclAceFlagOpcode,
me1200AclAceArpFlagEthernet ME1200AclAceFlagOpcode,
me1200AclAceIpv4DestMacOp ME1200DestMacType,
me1200AclAceIpv4ProtocolOp ME1200ASType,
me1200AclAceIpv4Protocol ME1200Unsigned8,
me1200AclAceIpv4FlagTtl ME1200AclAceFlagOpcode,
me1200AclAceIpv4FlagFragment ME1200AclAceFlagOpcode,
me1200AclAceIpv4FlagIpOption ME1200AclAceFlagOpcode,
me1200AclAceIpv4SrcIp IpAddress,
me1200AclAceIpv4SrcIpMask IpAddress,
me1200AclAceIpv4DestIp IpAddress,
me1200AclAceIpv4DestIpMask IpAddress,
me1200AclAceIpv4IcmpTypeOp ME1200ASType,
me1200AclAceIpv4IcmpType ME1200Unsigned8,
me1200AclAceIpv4IcmpCodeOp ME1200ASType,
me1200AclAceIpv4IcmpCode ME1200Unsigned8,
me1200AclAceIpv4SrcPortOp ME1200ASRType,
me1200AclAceIpv4SrcPort ME1200Unsigned16,
me1200AclAceIpv4SrcPortRange ME1200Unsigned16,
me1200AclAceIpv4DestPortOp ME1200ASRType,
me1200AclAceIpv4DestPort ME1200Unsigned16,
me1200AclAceIpv4DestPortRange ME1200Unsigned16,
me1200AclAceIpv4TcpFlagFin ME1200AclAceFlagOpcode,
me1200AclAceIpv4TcpFlagSyn ME1200AclAceFlagOpcode,
me1200AclAceIpv4TcpFlagRst ME1200AclAceFlagOpcode,
me1200AclAceIpv4TcpFlagPsh ME1200AclAceFlagOpcode,
me1200AclAceIpv4TcpFlagAck ME1200AclAceFlagOpcode,
me1200AclAceIpv4TcpFlagUrg ME1200AclAceFlagOpcode,
me1200AclAceIPv6DestMacOp ME1200DestMacType,
me1200AclAceIpv6NextHeaderOp ME1200ASType,
me1200AclAceIpv6NextHeader ME1200Unsigned8,
me1200AclAceIpv6SrcIp InetAddressIPv6,
me1200AclAceIpv6SrcIpMask InetAddressIPv6,
me1200AclAceIpv6FlagHopLimiter ME1200AclAceFlagOpcode,
me1200AclAceIpv6Icmpv6TypeOp ME1200ASType,
me1200AclAceIpv6Icmpv6Type ME1200Unsigned8,
me1200AclAceIpv6Icmpv6CodeOp ME1200ASType,
me1200AclAceIpv6Icmpv6Code ME1200Unsigned8,
me1200AclAceIpv6SrcPortOp ME1200ASRType,
me1200AclAceIpv6SrcPort ME1200Unsigned16,
me1200AclAceIpv6SrcPortRange ME1200Unsigned16,
me1200AclAceIpv6DestPortOp ME1200ASRType,
me1200AclAceIpv6DestPort ME1200Unsigned16,
me1200AclAceIpv6DestPortRange ME1200Unsigned16,
me1200AclAceIpv6TcpFlagFin ME1200AclAceFlagOpcode,
me1200AclAceIpv6TcpFlagSyn ME1200AclAceFlagOpcode,
me1200AclAceIpv6TcpFlagRst ME1200AclAceFlagOpcode,
me1200AclAceIpv6TcpFlagPsh ME1200AclAceFlagOpcode,
me1200AclAceIpv6TcpFlagAck ME1200AclAceFlagOpcode,
me1200AclAceIpv6TcpFlagUrg ME1200AclAceFlagOpcode,
me1200AclAceAction ME1200RowEditorState
}
me1200AclAceId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identification of ACE."
::= { me1200AclAceEntry 1 }
me1200AclAceNextAceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The next identification for this ACE. Possible values are: 0(end of
list), 1-512."
::= { me1200AclAceEntry 2 }
me1200AclAceLookup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second lookup operation for this ACE. Possible values are:
1(enabled) and 2(disabled)."
::= { me1200AclAceEntry 3 }
me1200AclAceIngressPortList OBJECT-TYPE
SYNTAX ME1200PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ingress port list for this ACE. Each octet within this value
specifies a set of eight ports, with the first octet specifying ports 1
through 8, the second octet specifying ports 9 through 16, etc. Within
each octet, the most significant bit represents the lowest numbered
port, and the least significant bit represents the highest numbered
port. Thus, each port of the switch is represented by a single bit
within the value of this object. If that bit has a value of '1' then
that port is included in the set of ports; the port is not included if
its bit has a value of '0'."
::= { me1200AclAceEntry 5 }
me1200AclAcePolicyValue OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The policy number for this ACE. The feature is inactive when policy
mask value is non-zero."
::= { me1200AclAceEntry 6 }
me1200AclAcePolicyMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The policy number for this ACE. The feature is inactive when policy
mask value is non-zero."
::= { me1200AclAceEntry 7 }
me1200AclAceHitAction OBJECT-TYPE
SYNTAX ME1200AclAceHitAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hit action operation for this ACE. Note all ports will be the
filter port member when filter action is set on the first time. "
::= { me1200AclAceEntry 8 }
me1200AclAceFilterPortList OBJECT-TYPE
SYNTAX ME1200PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter port list. It is active only when the hit action is
filtered. Set the action value to 0(filter) before the new setting.
Note that the action will change deny action if there is no any port in
the member set. Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through 8, the second
octet specifying ports 9 through 16, etc. Within each octet, the most
significant bit represents the lowest numbered port, and the least
significant bit represents the highest numbered port. Thus, each port
of the switch is represented by a single bit within the value of this
object. If that bit has a value of '1' then that port is included in
the set of ports; the port is not included if its bit has a value of
'0'."
::= { me1200AclAceEntry 9 }
me1200AclAceRateLimiterId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate limiter ID. Possible values are: 0(disabled), 1-16."
::= { me1200AclAceEntry 10 }
me1200AclAceEvcPolicerId OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The EVC policer ID. Possible values are: 0(disabled), 1-1022."
::= { me1200AclAceEntry 11 }
me1200AclAceRedirectPortList OBJECT-TYPE
SYNTAX ME1200PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ingress port list for this ACE. It is active only when the hit
action is denied. Set the action value to 1(deny) before the new
setting. Set value 0 to disable the opertion. Each octet within this
value specifies a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents the lowest
numbered port, and the least significant bit represents the highest
numbered port. Thus, each port of the switch is represented by a single
bit within the value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port is not
included if its bit has a value of '0'."
::= { me1200AclAceEntry 12 }
me1200AclAceMirror OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rmirror operation. Frames matching this ACE are mirrored to the
destination mirror port."
::= { me1200AclAceEntry 13 }
me1200AclAceLogging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logging operation."
::= { me1200AclAceEntry 14 }
me1200AclAceShutdown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The shutdown operation."
::= { me1200AclAceEntry 15 }
me1200AclAceVlanTagged OBJECT-TYPE
SYNTAX ME1200VlanTagged
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 802.1Q VLAN tagged for this ACE."
::= { me1200AclAceEntry 100 }
me1200AclAceVlanId OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID for this ACE. Possible values are: 0(disabled), 1-4095."
::= { me1200AclAceEntry 101 }
me1200AclAceVlanTagPriority OBJECT-TYPE
SYNTAX ME1200VlanTagPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLN tag priority for this ACE. Enable VLAN tagged filter before the
new setting."
::= { me1200AclAceEntry 102 }
me1200AclAceFrameType OBJECT-TYPE
SYNTAX ME1200AclAceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame type for this ACE. "
::= { me1200AclAceEntry 200 }
me1200AclAceEtypeSrcMacOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a Ethernet type packet's source MAC address is to be
compared. This object can only be configured if FrameType is etype(1)."
::= { me1200AclAceEntry 300 }
me1200AclAceEtypeSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits source MAC address. This object can only be
configured if FrameType is etype(1) and EtypeSrcMacOp is specific(1)."
::= { me1200AclAceEntry 301 }
me1200AclAceEtypeDestMacOp OBJECT-TYPE
SYNTAX ME1200AdvDestMacType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a Ethernet type packet's destination MAC address is to be
compared. This object can only be configured if FrameType is etype(1)."
::= { me1200AclAceEntry 302 }
me1200AclAceEtypeDestMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits destination MAC address. This object can only be
configured if FrameType is etype(1) and EtypeDestMacOp is specific(1)."
::= { me1200AclAceEntry 303 }
me1200AclAceEtype OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packet's 16 bit Ethernet type field. Possible values are:
0(disabled), 0x600-0xFFFF but excluding 0x800(IPv4), 0x806(ARP) and
0x86DD(IPv6).This object can only be configured if FrameType is
etype(1) and EtypeDestMacOp is specific(1)."
::= { me1200AclAceEntry 304 }
me1200AclAceArpSrcMacOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's source MAC address is to be compared. This
object can only be configured if FrameType is arp(4)."
::= { me1200AclAceEntry 600 }
me1200AclAceArpSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits source MAC address. This object can only be
configured if FrameType is arp(4) and ArpSrcMacOp is specific(1)."
::= { me1200AclAceEntry 601 }
me1200AclAceArpDestMacOp OBJECT-TYPE
SYNTAX ME1200DestMacType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's destination MAC address is to be compared.
This object can only be configured if FrameType is arp(4)."
::= { me1200AclAceEntry 602 }
me1200AclAceArpSenderIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified ARP sender IP address. The packets sender address is
AND-ed with the value of ArpSenderIpMask and then compared with the
value of this object. If ArpSenderIp and ArpSrcIpMask are 0.0.0.0, this
entry matches any sender IP address. This object can only be configured
if FrameType is arp(4)."
::= { me1200AclAceEntry 603 }
me1200AclAceArpSenderIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified ARP sender IP address mask. This object can only be
configured if FrameType is arp(4)."
::= { me1200AclAceEntry 604 }
me1200AclAceArpTragetIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified ARP target IP address. The packets target address is
AND-ed with the value of ArpTragetIpMask and then compared with the
value of this object. If ArpTragetIp and ArpSrcIpMask are 0.0.0.0, this
entry matches any target IP address. This object can only be configured
if FrameType is arp(4)."
::= { me1200AclAceEntry 605 }
me1200AclAceArpTragetIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified ARP target IP address mask. This object can only be
configured if FrameType is arp(4)."
::= { me1200AclAceEntry 606 }
me1200AclAceArpOpcode OBJECT-TYPE
SYNTAX ME1200ArpOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's opcode is to be compared. This object can
only be configured if FrameType is arp(4)."
::= { me1200AclAceEntry 607 }
me1200AclAceArpFlagRequest OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's request/reply opcode is to be compared.
The value 0 means any ARP opcode is allowed (don't-care field), value 1
means ARP opcode is equal to request opcode and value 2 means ARP
opcode is equal to reply opcode. This object can only be configured if
FrameType is arp(4)."
::= { me1200AclAceEntry 608 }
me1200AclAceArpFlagSenderMac OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's sender hardware address field (SHA) is to
be compared. The value 0 means any SHA value is allowed (don't-care
field), value 1 means SHA is not equal to the SMAC address and value 2
means SHA is equal to the SMAC address. This object can only be
configured if FrameType is arp(4)."
::= { me1200AclAceEntry 609 }
me1200AclAceArpFlagTargetMac OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's target hardware address field (THA) is to
be compared. The value 0 means any THA value is allowed (don't-care
field), value 1 means THA is not equal to the DMAC address and value 2
means THA is equal to the DMAC address. This object can only be
configured if FrameType is arp(4)."
::= { me1200AclAceEntry 610 }
me1200AclAceArpFlagLen OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's s hardware address length field (HLN) is
to be compared. The value 0 means any HLN value is allowed (don't-care
field), value 1 means HLN is not equal to Ethernet (0x06) or the (PLN)
is not equal to IPv4 (0x04) and value 2 means HLN is equal to Ethernet
(0x06) or the (PLN) is not equal to IPv4 (0x04). This object can only
be configured if FrameType is arp(4)."
::= { me1200AclAceEntry 611 }
me1200AclAceArpFlagIp OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's hardware address space field (HRD) is to
be compared. The value 0 means any HRD value is allowed (don't-care
field), value 1 means HRD is not equal to Ethernet (1) and value 2
means HRD is equal to Ethernet (1). This object can only be configured
if FrameType is arp(4)."
::= { me1200AclAceEntry 612 }
me1200AclAceArpFlagEthernet OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's protocol address space field (PRO) is to
be compared. The value 0 means any PRO value is allowed (don't-care
field), value 1 means PRO is not equal to IP (0x800) and value 2 means
PRO is equal to IP (0x800). This object can only be configured if
FrameType is arp(4)."
::= { me1200AclAceEntry 613 }
me1200AclAceIpv4DestMacOp OBJECT-TYPE
SYNTAX ME1200DestMacType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's destination MAC address is to be
compared. This object can only be configured if FrameType is ipv4(5)."
::= { me1200AclAceEntry 700 }
me1200AclAceIpv4ProtocolOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's protocol field is to be compared. This
object can only be configured if FrameType is ipv4(5)."
::= { me1200AclAceEntry 701 }
me1200AclAceIpv4Protocol OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol number field in the IPv4 header used to indicate a higher
layer protocol. Possible values are 0-255.This object can only be
configured if FrameType is ipv4(5) and Ipv4ProtocolOp is specific(1)."
::= { me1200AclAceEntry 702 }
me1200AclAceIpv4FlagTtl OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's Time-to-Live field (TTL) is to be
compared. The value 0 means any TTL value is allowed (don't-care
field), value 1 means TTL is not equal zero and value 2 means TTL is
equal to zero. This object can only be configured if FrameType is
ipv4(5)."
::= { me1200AclAceEntry 703 }
me1200AclAceIpv4FlagFragment OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's More-Fragments field (MF) is to be
compared. The value 0 means any MF value is allowed (don't-care field),
value 1 means MF is not equal one (MF field isn't set) and value 2
means MF is equal to one (MF field is set). This object can only be
configured if FrameType is ipv4(5)."
::= { me1200AclAceEntry 704 }
me1200AclAceIpv4FlagIpOption OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's options field is to be compared. The
value 0 means any options is allowed (don't-care field), value 1 means
options is not equal one (options field isn't set) and value 2 means
options is equal to one (options field is set). This object can only be
configured if FrameType is ipv4(5)."
::= { me1200AclAceEntry 705 }
me1200AclAceIpv4SrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified source IPv4 address. The packets sender address is AND-ed
with the value of Ipv4SrcIpMask and then compared with the value of
this object. If Ipv4SrcIp and Ipv4SrcIpMask are 0.0.0.0, this entry
matches any source IP address. This object can only be configured if
FrameType is ipv4(5)."
::= { me1200AclAceEntry 706 }
me1200AclAceIpv4SrcIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified source IPv4 address mask. This object can only be
configured if FrameType isipv4(5)."
::= { me1200AclAceEntry 707 }
me1200AclAceIpv4DestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified destination IPv4 address. The packets sender address is
AND-ed with the value of Ipv4DestIpMask and then compared with the
value of this object. If Ipv4DestIp and Ipv4DestIpMask are 0.0.0.0,
this entry matches any destination IP address. This object can only be
configured if FrameType is ipv4(5)."
::= { me1200AclAceEntry 708 }
me1200AclAceIpv4DestIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified destination IPv4 address mask. This object can only be
configured if FrameType isipv4(5)."
::= { me1200AclAceEntry 709 }
me1200AclAceIpv4IcmpTypeOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's ICMP type field is to be compared. This
object can only be configured if FrameType is ipv4(5) and Ipv4Protocol
is icmp(1)."
::= { me1200AclAceEntry 710 }
me1200AclAceIpv4IcmpType OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ICMP type field in the IPv4 header. Possible values are 0-255.This
object can only be configured if FrameType is ipv4(5), Ipv4Protocol is
icmp(1) and Ipv4IcmpTypeOp is specific(1)."
::= { me1200AclAceEntry 711 }
me1200AclAceIpv4IcmpCodeOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's ICMP code field is to be compared. This
object can only be configured if FrameType is ipv4(5) and Ipv4Protocol
is icmp(1)."
::= { me1200AclAceEntry 712 }
me1200AclAceIpv4IcmpCode OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ICMP code field in the IPv4 header. Possible values are 0-255.This
object can only be configured if FrameType is ipv4(5), Ipv4Protocol is
icmp(1) and Ipv4IcmpCodeOp is specific(1)."
::= { me1200AclAceEntry 713 }
me1200AclAceIpv4SrcPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv4(5)."
::= { me1200AclAceEntry 714 }
me1200AclAceIpv4SrcPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv4(5) and Ipv4SrcPortOp is not
any(0)."
::= { me1200AclAceEntry 715 }
me1200AclAceIpv4SrcPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv4(5) and Ipv4SrcPortOp is range(2)."
::= { me1200AclAceEntry 716 }
me1200AclAceIpv4DestPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv4(5)."
::= { me1200AclAceEntry 717 }
me1200AclAceIpv4DestPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv4(5) and
Ipv4DestPortOp is not any(0)."
::= { me1200AclAceEntry 718 }
me1200AclAceIpv4DestPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv4(5) and
Ipv4DestPortOp is range(2)."
::= { me1200AclAceEntry 719 }
me1200AclAceIpv4TcpFlagFin OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'No more data from sender' field
(FIN) is to be compared. The value 0 means any FIN value is allowed
(don't-care field), value 1 means FIN is not equal one (FIN field isn't
set) and value 2 means FIN is equal to one (FIN field is set). This
object can only be configured if FrameType is ipv4(5) and
Ipv4ProtocolType is tcp(6)."
::= { me1200AclAceEntry 720 }
me1200AclAceIpv4TcpFlagSyn OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'Synchronize sequence numbers' field
(SYN) is to be compared. The value 0 means any SYN value is allowed
(don't-care field), value 1 means SYN is not equal one (FIN field isn't
set) and value 2 means SYN is equal to one (FIN field is set). This
object can only be configured if FrameType is ipv4(5) and
Ipv4ProtocolType is tcp(6)."
::= { me1200AclAceEntry 721 }
me1200AclAceIpv4TcpFlagRst OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'Reset the connection' field (RST) is
to be compared. The value 0 means any RST value is allowed (don't-care
field), value 1 means RST is not equal one (FIN field isn't set) and
value 2 means RST is equal to one (FIN field is set). This object can
only be configured if FrameType is ipv4(5) and Ipv4ProtocolType is
tcp(6)."
::= { me1200AclAceEntry 722 }
me1200AclAceIpv4TcpFlagPsh OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'Push Function' field (PSH) is to be
compared. The value 0 means any PSH value is allowed (don't-care
field), value 1 means PSH is not equal one (FIN field isn't set) and
value 2 means PSH is equal to one (FIN field is set). This object can
only be configured if FrameType is ipv4(5) and Ipv4ProtocolType is
tcp(6)."
::= { me1200AclAceEntry 723 }
me1200AclAceIpv4TcpFlagAck OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'Acknowledgment field significant'
field (ACK) is to be compared. The value 0 means any FIN value is
allowed (don't-care field), value 1 means ACK is not equal one (FIN
field isn't set) and value 2 means ACK is equal to one (FIN field is
set). This object can only be configured if FrameType is ipv4(5) and
Ipv4ProtocolType is tcp(6)."
::= { me1200AclAceEntry 724 }
me1200AclAceIpv4TcpFlagUrg OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'Urgent Pointer field significant'
field (URG) is to be compared. The value 0 means any URG value is
allowed (don't-care field), value 1 means URG is not equal one (FIN
field isn't set) and value 2 means URG is equal to one (FIN field is
set). This object can only be configured if FrameType is ipv4(5) and
Ipv4ProtocolType is tcp(6)."
::= { me1200AclAceEntry 725 }
me1200AclAceIPv6DestMacOp OBJECT-TYPE
SYNTAX ME1200DestMacType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 packet's destination MAC address is to be
compared. This object can only be configured if FrameType is arp(4)."
::= { me1200AclAceEntry 800 }
me1200AclAceIpv6NextHeaderOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 packet's next header field is to be compared. This
object can only be configured if FrameType is ipv6(6)."
::= { me1200AclAceEntry 801 }
me1200AclAceIpv6NextHeader OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The next header field in the IPv6 header used to indicate a higher
layer protocol. Possible values are 0-255.This object can only be
configured if FrameType is ipv6(6) and Ipv6NextHeaderOp is specific(1)."
::= { me1200AclAceEntry 802 }
me1200AclAceIpv6SrcIp OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 source address. The packets source address is AND-ed
with the value of Ipv6SrcIpMask and then compared with the value of
this object. If Ipv6SrcIp and Ipv6SrcIpMask are all zeros, this entry
matches any IPv6 source address. Only the least significant 32 bits of
this object are used. This object can only be configured if FrameType
is ipv6(6) and Ipv6SrcIpMask is not all zeros."
::= { me1200AclAceEntry 803 }
me1200AclAceIpv6SrcIpMask OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 source address mask. Only the least significant 32
bits of this object are used. This object can only be configured if
FrameType is ipv6(6)."
::= { me1200AclAceEntry 804 }
me1200AclAceIpv6FlagHopLimiter OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 packet's hop limit field is to be compared. The
value 0 means any hop limit value is allowed (don't-care field), value
1 means hop limit is not equal zero and value 2 means hop limit is
equal to zero. This object can only be configured if FrameType is
ipv6(6)."
::= { me1200AclAceEntry 805 }
me1200AclAceIpv6Icmpv6TypeOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 packet's ICMPv6 type field is to be compared. This
object can only be configured if FrameType is ipv6(6) and
Ipv6NextHeader is icmpv6(58)."
::= { me1200AclAceEntry 806 }
me1200AclAceIpv6Icmpv6Type OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ICMPv6 type field in the IPv6 header. Possible values are
0-255.This object can only be configured if FrameType is ipv6(6),
Ipv6NextHeader is icmpv6(58) and Ipv6Icmpv6TypeOp is specific(1)."
::= { me1200AclAceEntry 807 }
me1200AclAceIpv6Icmpv6CodeOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 packet's ICMPv6 code field is to be compared. This
object can only be configured if FrameType is ipv6(6) and
Ipv6NextHeader is icmpv6(58)."
::= { me1200AclAceEntry 808 }
me1200AclAceIpv6Icmpv6Code OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ICMPv6 code field in the IPv6 header. Possible values are
0-255.This object can only be configured if FrameType is ipv6(6),
Ipv6NextHeader is icmpv6(58) and Ipv6Icmpv6CodeOp is specific(1)."
::= { me1200AclAceEntry 809 }
me1200AclAceIpv6SrcPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv6(6)."
::= { me1200AclAceEntry 810 }
me1200AclAceIpv6SrcPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv6(6) and Ipv6SrcPortOp is not
any(0)."
::= { me1200AclAceEntry 811 }
me1200AclAceIpv6SrcPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv6(6) and Ipv6SrcPortOp is range(2)."
::= { me1200AclAceEntry 812 }
me1200AclAceIpv6DestPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv6(6)."
::= { me1200AclAceEntry 813 }
me1200AclAceIpv6DestPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv6(6) and
Ipv6DestPortOp is not any(0)."
::= { me1200AclAceEntry 814 }
me1200AclAceIpv6DestPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv6(6) and
Ipv6DestPortOp is range(2)."
::= { me1200AclAceEntry 815 }
me1200AclAceIpv6TcpFlagFin OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'No more data from sender' field
(FIN) is to be compared. The value 0 means any FIN value is allowed
(don't-care field), value 1 means FIN is not equal one (FIN field isn't
set) and value 2 means FIN is equal to one (FIN field is set). This
object can only be configured if FrameType is ipv6(6) and
Ipv6ProtocolType is tcp(6)."
::= { me1200AclAceEntry 816 }
me1200AclAceIpv6TcpFlagSyn OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'Synchronize sequence numbers' field
(SYN) is to be compared. The value 0 means any SYN value is allowed
(don't-care field), value 1 means SYN is not equal one (FIN field isn't
set) and value 2 means SYN is equal to one (FIN field is set). This
object can only be configured if FrameType is ipv6(6) and
Ipv6ProtocolType is tcp(6)."
::= { me1200AclAceEntry 817 }
me1200AclAceIpv6TcpFlagRst OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'Reset the connection' field (RST) is
to be compared. The value 0 means any RST value is allowed (don't-care
field), value 1 means RST is not equal one (FIN field isn't set) and
value 2 means RST is equal to one (FIN field is set). This object can
only be configured if FrameType is ipv6(6) and Ipv6ProtocolType is
tcp(6)."
::= { me1200AclAceEntry 818 }
me1200AclAceIpv6TcpFlagPsh OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'Push Function' field (PSH) is to be
compared. The value 0 means any PSH value is allowed (don't-care
field), value 1 means PSH is not equal one (FIN field isn't set) and
value 2 means PSH is equal to one (FIN field is set). This object can
only be configured if FrameType is ipv6(6) and Ipv6ProtocolType is
tcp(6)."
::= { me1200AclAceEntry 819 }
me1200AclAceIpv6TcpFlagAck OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'Acknowledgment field significant'
field (ACK) is to be compared. The value 0 means any FIN value is
allowed (don't-care field), value 1 means ACK is not equal one (FIN
field isn't set) and value 2 means ACK is equal to one (FIN field is
set). This object can only be configured if FrameType is ipv6(6) and
Ipv6ProtocolType is tcp(6)."
::= { me1200AclAceEntry 820 }
me1200AclAceIpv6TcpFlagUrg OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'Urgent Pointer field significant'
field (URG) is to be compared. The value 0 means any URG value is
allowed (don't-care field), value 1 means URG is not equal one (FIN
field isn't set) and value 2 means URG is equal to one (FIN field is
set). This object can only be configured if FrameType is ipv6(6) and
Ipv6ProtocolType is tcp(6)."
::= { me1200AclAceEntry 821 }
me1200AclAceAction OBJECT-TYPE
SYNTAX ME1200RowEditorState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action"
::= { me1200AclAceEntry 1000 }
me1200AclAceTableRowEditor OBJECT IDENTIFIER
::= { me1200AclAce 2 }
me1200AclAceTableRowEditorId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The identification of ACE."
::= { me1200AclAceTableRowEditor 1 }
me1200AclAceTableRowEditorNextAceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The next identification for this ACE. Possible values are: 0(end of
list), 1-512."
::= { me1200AclAceTableRowEditor 2 }
me1200AclAceTableRowEditorLookup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second lookup operation for this ACE. Possible values are:
1(enabled) and 2(disabled)."
::= { me1200AclAceTableRowEditor 3 }
me1200AclAceTableRowEditorIngressPortList OBJECT-TYPE
SYNTAX ME1200PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ingress port list for this ACE. Each octet within this value
specifies a set of eight ports, with the first octet specifying ports 1
through 8, the second octet specifying ports 9 through 16, etc. Within
each octet, the most significant bit represents the lowest numbered
port, and the least significant bit represents the highest numbered
port. Thus, each port of the switch is represented by a single bit
within the value of this object. If that bit has a value of '1' then
that port is included in the set of ports; the port is not included if
its bit has a value of '0'."
::= { me1200AclAceTableRowEditor 5 }
me1200AclAceTableRowEditorPolicyValue OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The policy number for this ACE. The feature is inactive when policy
mask value is non-zero."
::= { me1200AclAceTableRowEditor 6 }
me1200AclAceTableRowEditorPolicyMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The policy number for this ACE. The feature is inactive when policy
mask value is non-zero."
::= { me1200AclAceTableRowEditor 7 }
me1200AclAceTableRowEditorHitAction OBJECT-TYPE
SYNTAX ME1200AclAceHitAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hit action operation for this ACE. Note all ports will be the
filter port member when filter action is set on the first time. "
::= { me1200AclAceTableRowEditor 8 }
me1200AclAceTableRowEditorFilterPortList OBJECT-TYPE
SYNTAX ME1200PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter port list. It is active only when the hit action is
filtered. Set the action value to 0(filter) before the new setting.
Note that the action will change deny action if there is no any port in
the member set. Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through 8, the second
octet specifying ports 9 through 16, etc. Within each octet, the most
significant bit represents the lowest numbered port, and the least
significant bit represents the highest numbered port. Thus, each port
of the switch is represented by a single bit within the value of this
object. If that bit has a value of '1' then that port is included in
the set of ports; the port is not included if its bit has a value of
'0'."
::= { me1200AclAceTableRowEditor 9 }
me1200AclAceTableRowEditorRateLimiterId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate limiter ID. Possible values are: 0(disabled), 1-16."
::= { me1200AclAceTableRowEditor 10 }
me1200AclAceTableRowEditorEvcPolicerId OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The EVC policer ID. Possible values are: 0(disabled), 1-1022."
::= { me1200AclAceTableRowEditor 11 }
me1200AclAceTableRowEditorRedirectPortList OBJECT-TYPE
SYNTAX ME1200PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ingress port list for this ACE. It is active only when the hit
action is denied. Set the action value to 1(deny) before the new
setting. Set value 0 to disable the opertion. Each octet within this
value specifies a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents the lowest
numbered port, and the least significant bit represents the highest
numbered port. Thus, each port of the switch is represented by a single
bit within the value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port is not
included if its bit has a value of '0'."
::= { me1200AclAceTableRowEditor 12 }
me1200AclAceTableRowEditorMirror OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rmirror operation. Frames matching this ACE are mirrored to the
destination mirror port."
::= { me1200AclAceTableRowEditor 13 }
me1200AclAceTableRowEditorLogging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logging operation."
::= { me1200AclAceTableRowEditor 14 }
me1200AclAceTableRowEditorShutdown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The shutdown operation."
::= { me1200AclAceTableRowEditor 15 }
me1200AclAceTableRowEditorVlanTagged OBJECT-TYPE
SYNTAX ME1200VlanTagged
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 802.1Q VLAN tagged for this ACE."
::= { me1200AclAceTableRowEditor 100 }
me1200AclAceTableRowEditorVlanId OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID for this ACE. Possible values are: 0(disabled), 1-4095."
::= { me1200AclAceTableRowEditor 101 }
me1200AclAceTableRowEditorVlanTagPriority OBJECT-TYPE
SYNTAX ME1200VlanTagPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLN tag priority for this ACE. Enable VLAN tagged filter before the
new setting."
::= { me1200AclAceTableRowEditor 102 }
me1200AclAceTableRowEditorFrameType OBJECT-TYPE
SYNTAX ME1200AclAceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame type for this ACE. "
::= { me1200AclAceTableRowEditor 200 }
me1200AclAceTableRowEditorEtypeSrcMacOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a Ethernet type packet's source MAC address is to be
compared. This object can only be configured if FrameType is etype(1)."
::= { me1200AclAceTableRowEditor 300 }
me1200AclAceTableRowEditorEtypeSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits source MAC address. This object can only be
configured if FrameType is etype(1) and EtypeSrcMacOp is specific(1)."
::= { me1200AclAceTableRowEditor 301 }
me1200AclAceTableRowEditorEtypeDestMacOp OBJECT-TYPE
SYNTAX ME1200AdvDestMacType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a Ethernet type packet's destination MAC address is to be
compared. This object can only be configured if FrameType is etype(1)."
::= { me1200AclAceTableRowEditor 302 }
me1200AclAceTableRowEditorEtypeDestMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits destination MAC address. This object can only be
configured if FrameType is etype(1) and EtypeDestMacOp is specific(1)."
::= { me1200AclAceTableRowEditor 303 }
me1200AclAceTableRowEditorEtype OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packet's 16 bit Ethernet type field. Possible values are:
0(disabled), 0x600-0xFFFF but excluding 0x800(IPv4), 0x806(ARP) and
0x86DD(IPv6).This object can only be configured if FrameType is
etype(1) and EtypeDestMacOp is specific(1)."
::= { me1200AclAceTableRowEditor 304 }
me1200AclAceTableRowEditorArpSrcMacOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's source MAC address is to be compared. This
object can only be configured if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 600 }
me1200AclAceTableRowEditorArpSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits source MAC address. This object can only be
configured if FrameType is arp(4) and ArpSrcMacOp is specific(1)."
::= { me1200AclAceTableRowEditor 601 }
me1200AclAceTableRowEditorArpDestMacOp OBJECT-TYPE
SYNTAX ME1200DestMacType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's destination MAC address is to be compared.
This object can only be configured if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 602 }
me1200AclAceTableRowEditorArpSenderIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified ARP sender IP address. The packets sender address is
AND-ed with the value of ArpSenderIpMask and then compared with the
value of this object. If ArpSenderIp and ArpSrcIpMask are 0.0.0.0, this
entry matches any sender IP address. This object can only be configured
if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 603 }
me1200AclAceTableRowEditorArpSenderIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified ARP sender IP address mask. This object can only be
configured if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 604 }
me1200AclAceTableRowEditorArpTragetIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified ARP target IP address. The packets target address is
AND-ed with the value of ArpTragetIpMask and then compared with the
value of this object. If ArpTragetIp and ArpSrcIpMask are 0.0.0.0, this
entry matches any target IP address. This object can only be configured
if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 605 }
me1200AclAceTableRowEditorArpTragetIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified ARP target IP address mask. This object can only be
configured if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 606 }
me1200AclAceTableRowEditorArpOpcode OBJECT-TYPE
SYNTAX ME1200ArpOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's opcode is to be compared. This object can
only be configured if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 607 }
me1200AclAceTableRowEditorArpFlagRequest OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's request/reply opcode is to be compared.
The value 0 means any ARP opcode is allowed (don't-care field), value 1
means ARP opcode is equal to request opcode and value 2 means ARP
opcode is equal to reply opcode. This object can only be configured if
FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 608 }
me1200AclAceTableRowEditorArpFlagSenderMac OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's sender hardware address field (SHA) is to
be compared. The value 0 means any SHA value is allowed (don't-care
field), value 1 means SHA is not equal to the SMAC address and value 2
means SHA is equal to the SMAC address. This object can only be
configured if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 609 }
me1200AclAceTableRowEditorArpFlagTargetMac OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's target hardware address field (THA) is to
be compared. The value 0 means any THA value is allowed (don't-care
field), value 1 means THA is not equal to the DMAC address and value 2
means THA is equal to the DMAC address. This object can only be
configured if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 610 }
me1200AclAceTableRowEditorArpFlagLen OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's s hardware address length field (HLN) is
to be compared. The value 0 means any HLN value is allowed (don't-care
field), value 1 means HLN is not equal to Ethernet (0x06) or the (PLN)
is not equal to IPv4 (0x04) and value 2 means HLN is equal to Ethernet
(0x06) or the (PLN) is not equal to IPv4 (0x04). This object can only
be configured if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 611 }
me1200AclAceTableRowEditorArpFlagIp OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's hardware address space field (HRD) is to
be compared. The value 0 means any HRD value is allowed (don't-care
field), value 1 means HRD is not equal to Ethernet (1) and value 2
means HRD is equal to Ethernet (1). This object can only be configured
if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 612 }
me1200AclAceTableRowEditorArpFlagEthernet OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a ARP packet's protocol address space field (PRO) is to
be compared. The value 0 means any PRO value is allowed (don't-care
field), value 1 means PRO is not equal to IP (0x800) and value 2 means
PRO is equal to IP (0x800). This object can only be configured if
FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 613 }
me1200AclAceTableRowEditorIpv4DestMacOp OBJECT-TYPE
SYNTAX ME1200DestMacType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's destination MAC address is to be
compared. This object can only be configured if FrameType is ipv4(5)."
::= { me1200AclAceTableRowEditor 700 }
me1200AclAceTableRowEditorIpv4ProtocolOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's protocol field is to be compared. This
object can only be configured if FrameType is ipv4(5)."
::= { me1200AclAceTableRowEditor 701 }
me1200AclAceTableRowEditorIpv4Protocol OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol number field in the IPv4 header used to indicate a higher
layer protocol. Possible values are 0-255.This object can only be
configured if FrameType is ipv4(5) and Ipv4ProtocolOp is specific(1)."
::= { me1200AclAceTableRowEditor 702 }
me1200AclAceTableRowEditorIpv4FlagTtl OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's Time-to-Live field (TTL) is to be
compared. The value 0 means any TTL value is allowed (don't-care
field), value 1 means TTL is not equal zero and value 2 means TTL is
equal to zero. This object can only be configured if FrameType is
ipv4(5)."
::= { me1200AclAceTableRowEditor 703 }
me1200AclAceTableRowEditorIpv4FlagFragment OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's More-Fragments field (MF) is to be
compared. The value 0 means any MF value is allowed (don't-care field),
value 1 means MF is not equal one (MF field isn't set) and value 2
means MF is equal to one (MF field is set). This object can only be
configured if FrameType is ipv4(5)."
::= { me1200AclAceTableRowEditor 704 }
me1200AclAceTableRowEditorIpv4FlagIpOption OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's options field is to be compared. The
value 0 means any options is allowed (don't-care field), value 1 means
options is not equal one (options field isn't set) and value 2 means
options is equal to one (options field is set). This object can only be
configured if FrameType is ipv4(5)."
::= { me1200AclAceTableRowEditor 705 }
me1200AclAceTableRowEditorIpv4SrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified source IPv4 address. The packets sender address is AND-ed
with the value of Ipv4SrcIpMask and then compared with the value of
this object. If Ipv4SrcIp and Ipv4SrcIpMask are 0.0.0.0, this entry
matches any source IP address. This object can only be configured if
FrameType is ipv4(5)."
::= { me1200AclAceTableRowEditor 706 }
me1200AclAceTableRowEditorIpv4SrcIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified source IPv4 address mask. This object can only be
configured if FrameType isipv4(5)."
::= { me1200AclAceTableRowEditor 707 }
me1200AclAceTableRowEditorIpv4DestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified destination IPv4 address. The packets sender address is
AND-ed with the value of Ipv4DestIpMask and then compared with the
value of this object. If Ipv4DestIp and Ipv4DestIpMask are 0.0.0.0,
this entry matches any destination IP address. This object can only be
configured if FrameType is ipv4(5)."
::= { me1200AclAceTableRowEditor 708 }
me1200AclAceTableRowEditorIpv4DestIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified destination IPv4 address mask. This object can only be
configured if FrameType isipv4(5)."
::= { me1200AclAceTableRowEditor 709 }
me1200AclAceTableRowEditorIpv4IcmpTypeOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's ICMP type field is to be compared. This
object can only be configured if FrameType is ipv4(5) and Ipv4Protocol
is icmp(1)."
::= { me1200AclAceTableRowEditor 710 }
me1200AclAceTableRowEditorIpv4IcmpType OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ICMP type field in the IPv4 header. Possible values are 0-255.This
object can only be configured if FrameType is ipv4(5), Ipv4Protocol is
icmp(1) and Ipv4IcmpTypeOp is specific(1)."
::= { me1200AclAceTableRowEditor 711 }
me1200AclAceTableRowEditorIpv4IcmpCodeOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 packet's ICMP code field is to be compared. This
object can only be configured if FrameType is ipv4(5) and Ipv4Protocol
is icmp(1)."
::= { me1200AclAceTableRowEditor 712 }
me1200AclAceTableRowEditorIpv4IcmpCode OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ICMP code field in the IPv4 header. Possible values are 0-255.This
object can only be configured if FrameType is ipv4(5), Ipv4Protocol is
icmp(1) and Ipv4IcmpCodeOp is specific(1)."
::= { me1200AclAceTableRowEditor 713 }
me1200AclAceTableRowEditorIpv4SrcPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv4(5)."
::= { me1200AclAceTableRowEditor 714 }
me1200AclAceTableRowEditorIpv4SrcPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv4(5) and Ipv4SrcPortOp is not
any(0)."
::= { me1200AclAceTableRowEditor 715 }
me1200AclAceTableRowEditorIpv4SrcPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv4(5) and Ipv4SrcPortOp is range(2)."
::= { me1200AclAceTableRowEditor 716 }
me1200AclAceTableRowEditorIpv4DestPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv4(5)."
::= { me1200AclAceTableRowEditor 717 }
me1200AclAceTableRowEditorIpv4DestPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv4(5) and
Ipv4DestPortOp is not any(0)."
::= { me1200AclAceTableRowEditor 718 }
me1200AclAceTableRowEditorIpv4DestPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv4(5) and
Ipv4DestPortOp is range(2)."
::= { me1200AclAceTableRowEditor 719 }
me1200AclAceTableRowEditorIpv4TcpFlagFin OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'No more data from sender' field
(FIN) is to be compared. The value 0 means any FIN value is allowed
(don't-care field), value 1 means FIN is not equal one (FIN field isn't
set) and value 2 means FIN is equal to one (FIN field is set). This
object can only be configured if FrameType is ipv4(5) and
Ipv4ProtocolType is tcp(6)."
::= { me1200AclAceTableRowEditor 720 }
me1200AclAceTableRowEditorIpv4TcpFlagSyn OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'Synchronize sequence numbers' field
(SYN) is to be compared. The value 0 means any SYN value is allowed
(don't-care field), value 1 means SYN is not equal one (FIN field isn't
set) and value 2 means SYN is equal to one (FIN field is set). This
object can only be configured if FrameType is ipv4(5) and
Ipv4ProtocolType is tcp(6)."
::= { me1200AclAceTableRowEditor 721 }
me1200AclAceTableRowEditorIpv4TcpFlagRst OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'Reset the connection' field (RST) is
to be compared. The value 0 means any RST value is allowed (don't-care
field), value 1 means RST is not equal one (FIN field isn't set) and
value 2 means RST is equal to one (FIN field is set). This object can
only be configured if FrameType is ipv4(5) and Ipv4ProtocolType is
tcp(6)."
::= { me1200AclAceTableRowEditor 722 }
me1200AclAceTableRowEditorIpv4TcpFlagPsh OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'Push Function' field (PSH) is to be
compared. The value 0 means any PSH value is allowed (don't-care
field), value 1 means PSH is not equal one (FIN field isn't set) and
value 2 means PSH is equal to one (FIN field is set). This object can
only be configured if FrameType is ipv4(5) and Ipv4ProtocolType is
tcp(6)."
::= { me1200AclAceTableRowEditor 723 }
me1200AclAceTableRowEditorIpv4TcpFlagAck OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'Acknowledgment field significant'
field (ACK) is to be compared. The value 0 means any FIN value is
allowed (don't-care field), value 1 means ACK is not equal one (FIN
field isn't set) and value 2 means ACK is equal to one (FIN field is
set). This object can only be configured if FrameType is ipv4(5) and
Ipv4ProtocolType is tcp(6)."
::= { me1200AclAceTableRowEditor 724 }
me1200AclAceTableRowEditorIpv4TcpFlagUrg OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv4 TCP packet's 'Urgent Pointer field significant'
field (URG) is to be compared. The value 0 means any URG value is
allowed (don't-care field), value 1 means URG is not equal one (FIN
field isn't set) and value 2 means URG is equal to one (FIN field is
set). This object can only be configured if FrameType is ipv4(5) and
Ipv4ProtocolType is tcp(6)."
::= { me1200AclAceTableRowEditor 725 }
me1200AclAceTableRowEditorIPv6DestMacOp OBJECT-TYPE
SYNTAX ME1200DestMacType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 packet's destination MAC address is to be
compared. This object can only be configured if FrameType is arp(4)."
::= { me1200AclAceTableRowEditor 800 }
me1200AclAceTableRowEditorIpv6NextHeaderOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 packet's next header field is to be compared. This
object can only be configured if FrameType is ipv6(6)."
::= { me1200AclAceTableRowEditor 801 }
me1200AclAceTableRowEditorIpv6NextHeader OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The next header field in the IPv6 header used to indicate a higher
layer protocol. Possible values are 0-255.This object can only be
configured if FrameType is ipv6(6) and Ipv6NextHeaderOp is specific(1)."
::= { me1200AclAceTableRowEditor 802 }
me1200AclAceTableRowEditorIpv6SrcIp OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 source address. The packets source address is AND-ed
with the value of Ipv6SrcIpMask and then compared with the value of
this object. If Ipv6SrcIp and Ipv6SrcIpMask are all zeros, this entry
matches any IPv6 source address. Only the least significant 32 bits of
this object are used. This object can only be configured if FrameType
is ipv6(6) and Ipv6SrcIpMask is not all zeros."
::= { me1200AclAceTableRowEditor 803 }
me1200AclAceTableRowEditorIpv6SrcIpMask OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 source address mask. Only the least significant 32
bits of this object are used. This object can only be configured if
FrameType is ipv6(6)."
::= { me1200AclAceTableRowEditor 804 }
me1200AclAceTableRowEditorIpv6FlagHopLimiter OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 packet's hop limit field is to be compared. The
value 0 means any hop limit value is allowed (don't-care field), value
1 means hop limit is not equal zero and value 2 means hop limit is
equal to zero. This object can only be configured if FrameType is
ipv6(6)."
::= { me1200AclAceTableRowEditor 805 }
me1200AclAceTableRowEditorIpv6Icmpv6TypeOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 packet's ICMPv6 type field is to be compared. This
object can only be configured if FrameType is ipv6(6) and
Ipv6NextHeader is icmpv6(58)."
::= { me1200AclAceTableRowEditor 806 }
me1200AclAceTableRowEditorIpv6Icmpv6Type OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ICMPv6 type field in the IPv6 header. Possible values are
0-255.This object can only be configured if FrameType is ipv6(6),
Ipv6NextHeader is icmpv6(58) and Ipv6Icmpv6TypeOp is specific(1)."
::= { me1200AclAceTableRowEditor 807 }
me1200AclAceTableRowEditorIpv6Icmpv6CodeOp OBJECT-TYPE
SYNTAX ME1200ASType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 packet's ICMPv6 code field is to be compared. This
object can only be configured if FrameType is ipv6(6) and
Ipv6NextHeader is icmpv6(58)."
::= { me1200AclAceTableRowEditor 808 }
me1200AclAceTableRowEditorIpv6Icmpv6Code OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ICMPv6 code field in the IPv6 header. Possible values are
0-255.This object can only be configured if FrameType is ipv6(6),
Ipv6NextHeader is icmpv6(58) and Ipv6Icmpv6CodeOp is specific(1)."
::= { me1200AclAceTableRowEditor 809 }
me1200AclAceTableRowEditorIpv6SrcPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv6(6)."
::= { me1200AclAceTableRowEditor 810 }
me1200AclAceTableRowEditorIpv6SrcPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv6(6) and Ipv6SrcPortOp is not
any(0)."
::= { me1200AclAceTableRowEditor 811 }
me1200AclAceTableRowEditorIpv6SrcPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv6(6) and Ipv6SrcPortOp is range(2)."
::= { me1200AclAceTableRowEditor 812 }
me1200AclAceTableRowEditorIpv6DestPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv6(6)."
::= { me1200AclAceTableRowEditor 813 }
me1200AclAceTableRowEditorIpv6DestPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv6(6) and
Ipv6DestPortOp is not any(0)."
::= { me1200AclAceTableRowEditor 814 }
me1200AclAceTableRowEditorIpv6DestPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv6(6) and
Ipv6DestPortOp is range(2)."
::= { me1200AclAceTableRowEditor 815 }
me1200AclAceTableRowEditorIpv6TcpFlagFin OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'No more data from sender' field
(FIN) is to be compared. The value 0 means any FIN value is allowed
(don't-care field), value 1 means FIN is not equal one (FIN field isn't
set) and value 2 means FIN is equal to one (FIN field is set). This
object can only be configured if FrameType is ipv6(6) and
Ipv6ProtocolType is tcp(6)."
::= { me1200AclAceTableRowEditor 816 }
me1200AclAceTableRowEditorIpv6TcpFlagSyn OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'Synchronize sequence numbers' field
(SYN) is to be compared. The value 0 means any SYN value is allowed
(don't-care field), value 1 means SYN is not equal one (FIN field isn't
set) and value 2 means SYN is equal to one (FIN field is set). This
object can only be configured if FrameType is ipv6(6) and
Ipv6ProtocolType is tcp(6)."
::= { me1200AclAceTableRowEditor 817 }
me1200AclAceTableRowEditorIpv6TcpFlagRst OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'Reset the connection' field (RST) is
to be compared. The value 0 means any RST value is allowed (don't-care
field), value 1 means RST is not equal one (FIN field isn't set) and
value 2 means RST is equal to one (FIN field is set). This object can
only be configured if FrameType is ipv6(6) and Ipv6ProtocolType is
tcp(6)."
::= { me1200AclAceTableRowEditor 818 }
me1200AclAceTableRowEditorIpv6TcpFlagPsh OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'Push Function' field (PSH) is to be
compared. The value 0 means any PSH value is allowed (don't-care
field), value 1 means PSH is not equal one (FIN field isn't set) and
value 2 means PSH is equal to one (FIN field is set). This object can
only be configured if FrameType is ipv6(6) and Ipv6ProtocolType is
tcp(6)."
::= { me1200AclAceTableRowEditor 819 }
me1200AclAceTableRowEditorIpv6TcpFlagAck OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'Acknowledgment field significant'
field (ACK) is to be compared. The value 0 means any FIN value is
allowed (don't-care field), value 1 means ACK is not equal one (FIN
field isn't set) and value 2 means ACK is equal to one (FIN field is
set). This object can only be configured if FrameType is ipv6(6) and
Ipv6ProtocolType is tcp(6)."
::= { me1200AclAceTableRowEditor 820 }
me1200AclAceTableRowEditorIpv6TcpFlagUrg OBJECT-TYPE
SYNTAX ME1200AclAceFlagOpcode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a IPv6 TCP packet's 'Urgent Pointer field significant'
field (URG) is to be compared. The value 0 means any URG value is
allowed (don't-care field), value 1 means URG is not equal one (FIN
field isn't set) and value 2 means URG is equal to one (FIN field is
set). This object can only be configured if FrameType is ipv6(6) and
Ipv6ProtocolType is tcp(6)."
::= { me1200AclAceTableRowEditor 821 }
me1200AclAceTableRowEditorAction OBJECT-TYPE
SYNTAX ME1200RowEditorState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action"
::= { me1200AclAceTableRowEditor 1000 }
me1200AclAcePrecedenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200AclAcePrecedenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides an overview of ACE by hit precedence."
::= { me1200AclAce 3 }
me1200AclAcePrecedenceEntry OBJECT-TYPE
SYNTAX ME1200AclAcePrecedenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains a set of parameters."
INDEX { me1200AclAcePrecedencePrecedenceIndex }
::= { me1200AclAcePrecedenceTable 1 }
ME1200AclAcePrecedenceEntry ::= SEQUENCE {
me1200AclAcePrecedencePrecedenceIndex Integer32,
me1200AclAcePrecedenceAceId Unsigned32
}
me1200AclAcePrecedencePrecedenceIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL ACE hit precedence."
::= { me1200AclAcePrecedenceEntry 1 }
me1200AclAcePrecedenceAceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identification for this ACE. Possible values are: 0(end of list),
1-512."
::= { me1200AclAcePrecedenceEntry 2 }
me1200AclInterface OBJECT IDENTIFIER
::= { me1200AclConfig 2 }
me1200AclInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200AclInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL interface configuration table."
::= { me1200AclInterface 1 }
me1200AclInterfaceEntry OBJECT-TYPE
SYNTAX ME1200AclInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each interface has a set of parameters"
INDEX { me1200AclInterfaceIfIndex }
::= { me1200AclInterfaceTable 1 }
ME1200AclInterfaceEntry ::= SEQUENCE {
me1200AclInterfaceIfIndex ME1200InterfaceIndex,
me1200AclInterfacePolicyId Unsigned32,
me1200AclInterfaceHitAction ME1200AclInterfaceHitAction,
me1200AclInterfaceRateLimiterId Unsigned32,
me1200AclInterfaceEvcPolicerId ME1200Unsigned16,
me1200AclInterfaceRedirectPortList ME1200PortList,
me1200AclInterfaceMirror TruthValue,
me1200AclInterfaceLogging TruthValue,
me1200AclInterfaceShutdown TruthValue,
me1200AclInterfaceState TruthValue
}
me1200AclInterfaceIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of logical interface, it is as well as the IF-MIB [RFC2863]
objects ifIndex."
::= { me1200AclInterfaceEntry 1 }
me1200AclInterfacePolicyId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The policy ID. Possible values are: 0-63."
::= { me1200AclInterfaceEntry 2 }
me1200AclInterfaceHitAction OBJECT-TYPE
SYNTAX ME1200AclInterfaceHitAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hit action."
::= { me1200AclInterfaceEntry 3 }
me1200AclInterfaceRateLimiterId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate limiter ID. Possible values are: 0(disabled), 1-16."
::= { me1200AclInterfaceEntry 4 }
me1200AclInterfaceEvcPolicerId OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The EVC policer ID. Possible values are: 0(disabled), 1-1022."
::= { me1200AclInterfaceEntry 5 }
me1200AclInterfaceRedirectPortList OBJECT-TYPE
SYNTAX ME1200PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ingress port list for this ACE. It is active only when the hit
action is denied. Set the action value to 1(deny) before the new
setting. Set value 0 to disable the opertion. Each octet within this
value specifies a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents the lowest
numbered port, and the least significant bit represents the highest
numbered port. Thus, each port of the switch is represented by a single
bit within the value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port is not
included if its bit has a value of '0'."
::= { me1200AclInterfaceEntry 6 }
me1200AclInterfaceMirror OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rmirror operation. Frames matching this ACE are mirrored to the
destination mirror port."
::= { me1200AclInterfaceEntry 7 }
me1200AclInterfaceLogging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logging operation."
::= { me1200AclInterfaceEntry 8 }
me1200AclInterfaceShutdown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The shutdown operation."
::= { me1200AclInterfaceEntry 9 }
me1200AclInterfaceState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port state of this interface."
::= { me1200AclInterfaceEntry 10 }
me1200AclStatus OBJECT IDENTIFIER
::= { me1200AclMIBObjects 3 }
me1200AclStatusGlobals OBJECT IDENTIFIER
::= { me1200AclStatus 1 }
me1200AclAceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200AclAceStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the ACE status in the hardware table."
::= { me1200AclStatusGlobals 1 }
me1200AclAceStatusEntry OBJECT-TYPE
SYNTAX ME1200AclAceStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains a set of parameters."
INDEX { me1200AclAceStatusPrecedenceIndex }
::= { me1200AclAceStatusTable 1 }
ME1200AclAceStatusEntry ::= SEQUENCE {
me1200AclAceStatusPrecedenceIndex Integer32,
me1200AclAceStatusUser ME1200AclUser,
me1200AclAceStatusAceId Unsigned32,
me1200AclAceStatusConflict TruthValue
}
me1200AclAceStatusPrecedenceIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL ACE hit precedence."
::= { me1200AclAceStatusEntry 2 }
me1200AclAceStatusUser OBJECT-TYPE
SYNTAX ME1200AclUser
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The application user of ACL."
::= { me1200AclAceStatusEntry 3 }
me1200AclAceStatusAceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identification for this ACE. Possible values are: 0(end of list),
1-512."
::= { me1200AclAceStatusEntry 4 }
me1200AclAceStatusConflict OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The conflict status of this ACE. When the status value is 1(true), it
means the specific ACE is not applied to the hardware due to hardware
limitations."
::= { me1200AclAceStatusEntry 5 }
me1200AclAceHitCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200AclAceHitCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL ACE hit count table."
::= { me1200AclStatusGlobals 2 }
me1200AclAceHitCountEntry OBJECT-TYPE
SYNTAX ME1200AclAceHitCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row has the hit count of ACE"
INDEX { me1200AclAceHitCountAceId }
::= { me1200AclAceHitCountTable 1 }
ME1200AclAceHitCountEntry ::= SEQUENCE {
me1200AclAceHitCountAceId Integer32,
me1200AclAceHitCountHitCount Unsigned32
}
me1200AclAceHitCountAceId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identification of ACE."
::= { me1200AclAceHitCountEntry 1 }
me1200AclAceHitCountHitCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hit count of this ACE."
::= { me1200AclAceHitCountEntry 2 }
me1200AclStatusInterface OBJECT IDENTIFIER
::= { me1200AclStatus 2 }
me1200AclInterfaceHitCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200AclInterfaceHitCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL interface hit count table."
::= { me1200AclStatusInterface 1 }
me1200AclInterfaceHitCountEntry OBJECT-TYPE
SYNTAX ME1200AclInterfaceHitCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row has the hit count of interface"
INDEX { me1200AclInterfaceHitCountId }
::= { me1200AclInterfaceHitCountTable 1 }
ME1200AclInterfaceHitCountEntry ::= SEQUENCE {
me1200AclInterfaceHitCountId Integer32,
me1200AclInterfaceHitCountHitCount Unsigned32
}
me1200AclInterfaceHitCountId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identification of ACE."
::= { me1200AclInterfaceHitCountEntry 1 }
me1200AclInterfaceHitCountHitCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hit count of this interface. The hit count will be increased if the
incoming frame doesn't hit any ACEs."
::= { me1200AclInterfaceHitCountEntry 2 }
me1200AclControl OBJECT IDENTIFIER
::= { me1200AclMIBObjects 4 }
me1200AclControlGlobals OBJECT IDENTIFIER
::= { me1200AclControl 1 }
me1200AclControlGlobalsClearAllHitCount OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operation is active when the value is set to 'ture(1)'."
::= { me1200AclControlGlobals 1 }
me1200AclMIBConformance OBJECT IDENTIFIER
::= { me1200AclMIB 3 }
me1200AclMIBCompliances OBJECT IDENTIFIER
::= { me1200AclMIBConformance 1 }
me1200AclMIBGroups OBJECT IDENTIFIER
::= { me1200AclMIBConformance 2 }
me1200AclRateLimiterTableInfoGroup OBJECT-GROUP
OBJECTS { me1200AclRateLimiterPacketRate, me1200AclRateLimiterBitRate,
me1200AclRateLimiterBitRateEnable }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200AclMIBGroups 1 }
me1200AclAceTableInfoGroup OBJECT-GROUP
OBJECTS { me1200AclAceNextAceId, me1200AclAceLookup, me1200AclAceIngressPortList,
me1200AclAcePolicyValue, me1200AclAcePolicyMask, me1200AclAceHitAction,
me1200AclAceFilterPortList, me1200AclAceRateLimiterId,
me1200AclAceEvcPolicerId, me1200AclAceRedirectPortList,
me1200AclAceMirror, me1200AclAceLogging, me1200AclAceShutdown,
me1200AclAceVlanTagged, me1200AclAceVlanId, me1200AclAceVlanTagPriority,
me1200AclAceFrameType, me1200AclAceEtypeSrcMacOp,
me1200AclAceEtypeSrcMac, me1200AclAceEtypeDestMacOp,
me1200AclAceEtypeDestMac, me1200AclAceEtype, me1200AclAceArpSrcMacOp,
me1200AclAceArpSrcMac, me1200AclAceArpDestMacOp, me1200AclAceArpSenderIp,
me1200AclAceArpSenderIpMask, me1200AclAceArpTragetIp,
me1200AclAceArpTragetIpMask, me1200AclAceArpOpcode,
me1200AclAceArpFlagRequest, me1200AclAceArpFlagSenderMac,
me1200AclAceArpFlagTargetMac, me1200AclAceArpFlagLen,
me1200AclAceArpFlagIp, me1200AclAceArpFlagEthernet,
me1200AclAceIpv4DestMacOp, me1200AclAceIpv4ProtocolOp,
me1200AclAceIpv4Protocol, me1200AclAceIpv4FlagTtl,
me1200AclAceIpv4FlagFragment, me1200AclAceIpv4FlagIpOption,
me1200AclAceIpv4SrcIp, me1200AclAceIpv4SrcIpMask, me1200AclAceIpv4DestIp,
me1200AclAceIpv4DestIpMask, me1200AclAceIpv4IcmpTypeOp,
me1200AclAceIpv4IcmpType, me1200AclAceIpv4IcmpCodeOp,
me1200AclAceIpv4IcmpCode, me1200AclAceIpv4SrcPortOp,
me1200AclAceIpv4SrcPort, me1200AclAceIpv4SrcPortRange,
me1200AclAceIpv4DestPortOp, me1200AclAceIpv4DestPort,
me1200AclAceIpv4DestPortRange, me1200AclAceIpv4TcpFlagFin,
me1200AclAceIpv4TcpFlagSyn, me1200AclAceIpv4TcpFlagRst,
me1200AclAceIpv4TcpFlagPsh, me1200AclAceIpv4TcpFlagAck,
me1200AclAceIpv4TcpFlagUrg, me1200AclAceIPv6DestMacOp,
me1200AclAceIpv6NextHeaderOp, me1200AclAceIpv6NextHeader,
me1200AclAceIpv6SrcIp, me1200AclAceIpv6SrcIpMask,
me1200AclAceIpv6FlagHopLimiter, me1200AclAceIpv6Icmpv6TypeOp,
me1200AclAceIpv6Icmpv6Type, me1200AclAceIpv6Icmpv6CodeOp,
me1200AclAceIpv6Icmpv6Code, me1200AclAceIpv6SrcPortOp,
me1200AclAceIpv6SrcPort, me1200AclAceIpv6SrcPortRange,
me1200AclAceIpv6DestPortOp, me1200AclAceIpv6DestPort,
me1200AclAceIpv6DestPortRange, me1200AclAceIpv6TcpFlagFin,
me1200AclAceIpv6TcpFlagSyn, me1200AclAceIpv6TcpFlagRst,
me1200AclAceIpv6TcpFlagPsh, me1200AclAceIpv6TcpFlagAck,
me1200AclAceIpv6TcpFlagUrg, me1200AclAceAction }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200AclMIBGroups 2 }
me1200AclAceTableRowEditorInfoGroup OBJECT-GROUP
OBJECTS { me1200AclAceTableRowEditorId, me1200AclAceTableRowEditorNextAceId,
me1200AclAceTableRowEditorLookup,
me1200AclAceTableRowEditorIngressPortList,
me1200AclAceTableRowEditorPolicyValue,
me1200AclAceTableRowEditorPolicyMask,
me1200AclAceTableRowEditorHitAction,
me1200AclAceTableRowEditorFilterPortList,
me1200AclAceTableRowEditorRateLimiterId,
me1200AclAceTableRowEditorEvcPolicerId,
me1200AclAceTableRowEditorRedirectPortList,
me1200AclAceTableRowEditorMirror,
me1200AclAceTableRowEditorLogging,
me1200AclAceTableRowEditorShutdown,
me1200AclAceTableRowEditorVlanTagged,
me1200AclAceTableRowEditorVlanId,
me1200AclAceTableRowEditorVlanTagPriority,
me1200AclAceTableRowEditorFrameType,
me1200AclAceTableRowEditorEtypeSrcMacOp,
me1200AclAceTableRowEditorEtypeSrcMac,
me1200AclAceTableRowEditorEtypeDestMacOp,
me1200AclAceTableRowEditorEtypeDestMac,
me1200AclAceTableRowEditorEtype,
me1200AclAceTableRowEditorArpSrcMacOp,
me1200AclAceTableRowEditorArpSrcMac,
me1200AclAceTableRowEditorArpDestMacOp,
me1200AclAceTableRowEditorArpSenderIp,
me1200AclAceTableRowEditorArpSenderIpMask,
me1200AclAceTableRowEditorArpTragetIp,
me1200AclAceTableRowEditorArpTragetIpMask,
me1200AclAceTableRowEditorArpOpcode,
me1200AclAceTableRowEditorArpFlagRequest,
me1200AclAceTableRowEditorArpFlagSenderMac,
me1200AclAceTableRowEditorArpFlagTargetMac,
me1200AclAceTableRowEditorArpFlagLen,
me1200AclAceTableRowEditorArpFlagIp,
me1200AclAceTableRowEditorArpFlagEthernet,
me1200AclAceTableRowEditorIpv4DestMacOp,
me1200AclAceTableRowEditorIpv4ProtocolOp,
me1200AclAceTableRowEditorIpv4Protocol,
me1200AclAceTableRowEditorIpv4FlagTtl,
me1200AclAceTableRowEditorIpv4FlagFragment,
me1200AclAceTableRowEditorIpv4FlagIpOption,
me1200AclAceTableRowEditorIpv4SrcIp,
me1200AclAceTableRowEditorIpv4SrcIpMask,
me1200AclAceTableRowEditorIpv4DestIp,
me1200AclAceTableRowEditorIpv4DestIpMask,
me1200AclAceTableRowEditorIpv4IcmpTypeOp,
me1200AclAceTableRowEditorIpv4IcmpType,
me1200AclAceTableRowEditorIpv4IcmpCodeOp,
me1200AclAceTableRowEditorIpv4IcmpCode,
me1200AclAceTableRowEditorIpv4SrcPortOp,
me1200AclAceTableRowEditorIpv4SrcPort,
me1200AclAceTableRowEditorIpv4SrcPortRange,
me1200AclAceTableRowEditorIpv4DestPortOp,
me1200AclAceTableRowEditorIpv4DestPort,
me1200AclAceTableRowEditorIpv4DestPortRange,
me1200AclAceTableRowEditorIpv4TcpFlagFin,
me1200AclAceTableRowEditorIpv4TcpFlagSyn,
me1200AclAceTableRowEditorIpv4TcpFlagRst,
me1200AclAceTableRowEditorIpv4TcpFlagPsh,
me1200AclAceTableRowEditorIpv4TcpFlagAck,
me1200AclAceTableRowEditorIpv4TcpFlagUrg,
me1200AclAceTableRowEditorIPv6DestMacOp,
me1200AclAceTableRowEditorIpv6NextHeaderOp,
me1200AclAceTableRowEditorIpv6NextHeader,
me1200AclAceTableRowEditorIpv6SrcIp,
me1200AclAceTableRowEditorIpv6SrcIpMask,
me1200AclAceTableRowEditorIpv6FlagHopLimiter,
me1200AclAceTableRowEditorIpv6Icmpv6TypeOp,
me1200AclAceTableRowEditorIpv6Icmpv6Type,
me1200AclAceTableRowEditorIpv6Icmpv6CodeOp,
me1200AclAceTableRowEditorIpv6Icmpv6Code,
me1200AclAceTableRowEditorIpv6SrcPortOp,
me1200AclAceTableRowEditorIpv6SrcPort,
me1200AclAceTableRowEditorIpv6SrcPortRange,
me1200AclAceTableRowEditorIpv6DestPortOp,
me1200AclAceTableRowEditorIpv6DestPort,
me1200AclAceTableRowEditorIpv6DestPortRange,
me1200AclAceTableRowEditorIpv6TcpFlagFin,
me1200AclAceTableRowEditorIpv6TcpFlagSyn,
me1200AclAceTableRowEditorIpv6TcpFlagRst,
me1200AclAceTableRowEditorIpv6TcpFlagPsh,
me1200AclAceTableRowEditorIpv6TcpFlagAck,
me1200AclAceTableRowEditorIpv6TcpFlagUrg,
me1200AclAceTableRowEditorAction }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200AclMIBGroups 3 }
me1200AclAcePrecedenceTableInfoGroup OBJECT-GROUP
OBJECTS { me1200AclAcePrecedenceAceId }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200AclMIBGroups 4 }
me1200AclInterfaceTableInfoGroup OBJECT-GROUP
OBJECTS { me1200AclInterfacePolicyId, me1200AclInterfaceHitAction,
me1200AclInterfaceRateLimiterId, me1200AclInterfaceEvcPolicerId,
me1200AclInterfaceRedirectPortList, me1200AclInterfaceMirror,
me1200AclInterfaceLogging, me1200AclInterfaceShutdown,
me1200AclInterfaceState }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200AclMIBGroups 5 }
me1200AclAceStatusTableInfoGroup OBJECT-GROUP
OBJECTS { me1200AclAceStatusUser, me1200AclAceStatusAceId,
me1200AclAceStatusConflict }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200AclMIBGroups 6 }
me1200AclAceHitCountTableInfoGroup OBJECT-GROUP
OBJECTS { me1200AclAceHitCountHitCount }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200AclMIBGroups 7 }
me1200AclInterfaceHitCountTableInfoGroup OBJECT-GROUP
OBJECTS { me1200AclInterfaceHitCountHitCount }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200AclMIBGroups 8 }
me1200AclControlGlobalsInfoGroup OBJECT-GROUP
OBJECTS { me1200AclControlGlobalsClearAllHitCount }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200AclMIBGroups 9 }
me1200AclMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the implementation."
MODULE -- this module
MANDATORY-GROUPS { me1200AclRateLimiterTableInfoGroup,
me1200AclAceTableInfoGroup, me1200AclAceTableRowEditorInfoGroup,
me1200AclAcePrecedenceTableInfoGroup,
me1200AclInterfaceTableInfoGroup, me1200AclAceStatusTableInfoGroup,
me1200AclAceHitCountTableInfoGroup,
me1200AclInterfaceHitCountTableInfoGroup,
me1200AclControlGlobalsInfoGroup }
::= { me1200AclMIBCompliances 1 }
END
View Git Blame Copy Permalink