1934 lines
67 KiB
Plaintext
1934 lines
67 KiB
Plaintext
-- CISCO-TELEPRESENCE-MIB.my: Cisco MIB to manage a
|
|
-- Telepresence System
|
|
--
|
|
-- Copyright (c) 2007-2012, 2014 by Cisco Systems Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- ******************************************************************
|
|
|
|
CISCO-TELEPRESENCE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
NOTIFICATION-GROUP,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION,
|
|
TruthValue,
|
|
TimeStamp
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
InetAddress,
|
|
InetAddressType
|
|
FROM INET-ADDRESS-MIB
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoTelepresenceMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201411240000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cochan@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module defines the managed objects for a
|
|
Telepresence system.
|
|
|
|
Telepresence refers to a set of technologies which
|
|
allow a person to feel as if they were present, to give
|
|
the appearance that they were present, or to have an
|
|
effect, at a location other than their true location.
|
|
|
|
A complete Telepresence system includes one or more
|
|
Telepresence CODECS and peripherals such as display, camera,
|
|
speaker, microphone and presentation device.
|
|
|
|
Peripherals are attached directly to a Telepresence CODEC via
|
|
an interface. Some peripherals may have more than one
|
|
interface to transmit audio and/or video data and provide a
|
|
configuration and/or control access."
|
|
REVISION "201407180000Z"
|
|
DESCRIPTION
|
|
"Added ctpDPPeripheralStatusTable Table and added
|
|
auxHDMIInputDevice(19) and bringYourOwnDevice(20)
|
|
enum value in CtpPeripheralDeviceCategoryCode"
|
|
REVISION "201207170000Z"
|
|
DESCRIPTION
|
|
"Added detectionDisabled in CtpPeripheralStatusCode"
|
|
REVISION "201203230000Z"
|
|
DESCRIPTION
|
|
"Added ctpVlanId, ctpDefaultGateway and
|
|
ctpDefaultGatewayAddrType in ctpObjects"
|
|
REVISION "201108230000Z"
|
|
DESCRIPTION
|
|
"Added uiDevice in CtpPeripheralDeviceCategoryCode"
|
|
REVISION "201007230000Z"
|
|
DESCRIPTION
|
|
"Added ctpUSBPeripheralStatusTable and
|
|
ctpWIFIPeripheralStatusTable in ctpPeripheralStatusEntry.
|
|
ciscoTelepresenceComplianceR02 has been deprecated by
|
|
ciscoTelepresenceComplianceR03.
|
|
ciscoTpPeripheralStatusGroupR01 has been deprecated by
|
|
ciscoTpPeripheralStatusGroupR02"
|
|
REVISION "201007130000Z"
|
|
DESCRIPTION
|
|
"Added ctpPeriStatusChangeNotifyEnable."
|
|
REVISION "200907120000Z"
|
|
DESCRIPTION
|
|
"Added ctpPeripheralDeviceCategory and ctpPeripheralDeviceNumber
|
|
in ctpPeripheralStatusEntry.
|
|
Added commError in CtpPeripheralStatusCode.
|
|
Updated the description of ctpPeripheralErrorHistoryTable."
|
|
REVISION "200802130000Z"
|
|
DESCRIPTION
|
|
"Added serial peripheral status and peripheral attribute table."
|
|
REVISION "200712110000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoMgmt 643 }
|
|
|
|
|
|
|
|
-- Textual Conventions
|
|
|
|
CtpSystemResetMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention identifies the system reset mode.
|
|
noRestart (1) --
|
|
No operation.
|
|
restartPending (2) --
|
|
Restart a system without shutting down when there
|
|
is no active call; otherwise, system will be
|
|
restarted after the call is terminated.
|
|
resetPending (3) --
|
|
Shut down a system and bring it back up if there
|
|
is no active call; otherwise, system will be reset
|
|
after the call is terminated.
|
|
forceReset (4) --
|
|
Shut down a system and bring it back up no matter
|
|
if there is an active call or not."
|
|
SYNTAX INTEGER {
|
|
noRestart(1), -- the following three values are
|
|
-- states: these values may be
|
|
-- read or written
|
|
restartPending(2),
|
|
resetPending(3),
|
|
forceReset(4) -- the following value is action:
|
|
-- it may be written but not read
|
|
}
|
|
|
|
CtpPeripheralCableCode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual convention identifies cable status of the attached
|
|
peripheral through HDMI.
|
|
plugged (1) -- Peripheral cable is plugged.
|
|
loose (2) -- Peripheral cable is loose.
|
|
unplugged (3) -- Peripheral cable is unplugged.
|
|
unknown (4) -- Cannot detect peripheral cable status.
|
|
internalError (5) -- Internal error."
|
|
SYNTAX INTEGER {
|
|
plugged(1),
|
|
loose(2),
|
|
unplugged(3),
|
|
unknown(4),
|
|
internalError(5)
|
|
}
|
|
|
|
CtpPeripheralPowerCode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual convention identifies power status of the attached
|
|
peripheral through HDMI.
|
|
on (1) -- Peripheral power is on.
|
|
standby (2) -- Peripheral power is in standby mode.
|
|
off (3) -- Peripheral power is off.
|
|
unknown (4) -- Cannot detect peripheral power status.
|
|
internalError (5) -- Internal error."
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
standby(2),
|
|
off(3),
|
|
unknown(4),
|
|
internalError(5)
|
|
}
|
|
|
|
CtpPeripheralStatusCode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual convention identifies the peripheral status.
|
|
noError (0) --
|
|
Expected peripheral device is functioning through
|
|
the attached port.
|
|
other (1) --
|
|
None of the listed state.
|
|
cableError (2) --
|
|
Expected peripheral device has cabling issue.
|
|
powerError (3) --
|
|
Expected peripheral device has power issue.
|
|
mgmtSysConfigError (4) --
|
|
Expected peripheral device has communications
|
|
management system configuration issue.
|
|
systemError (5) --
|
|
Telepresence system error.
|
|
deviceError (6) --
|
|
Expected peripheral device is attached but not
|
|
fully functional.
|
|
linkError (7) --
|
|
Expected peripheral device has port level link issue.
|
|
commError (8) --
|
|
Expected peripheral device has port level communication
|
|
issue.
|
|
detectionDisabled (9) --
|
|
Status detection has been disabled."
|
|
SYNTAX INTEGER {
|
|
noError(0),
|
|
other(1),
|
|
cableError(2),
|
|
powerError(3),
|
|
mgmtSysConfigError(4),
|
|
systemError(5),
|
|
deviceError(6),
|
|
linkError(7),
|
|
commError(8),
|
|
detectionDisabled(9)
|
|
}
|
|
|
|
CtpSystemAccessProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual convention identifies supported Telepresence user
|
|
access protocol.
|
|
http (1) -- Hypertext Transfer Protocol (HTTP)
|
|
snmp (2) -- Simple Network Management Protocol (SNMP)
|
|
ssh (3) -- Secure Shell (SSH)"
|
|
SYNTAX INTEGER {
|
|
http(1),
|
|
snmp(2),
|
|
ssh(3)
|
|
}
|
|
|
|
CtpPeripheralDeviceCategoryCode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual convention identifies the peripheral type.
|
|
unknown (0) -- Unknown Device
|
|
other (1) -- None of the listed device
|
|
uplinkDevice (2) -- Device attached to CTS uplink port
|
|
ipPhone (3) -- IP phone
|
|
camera (4) -- Camera
|
|
display (5) -- Display
|
|
secCodec (6) -- CTS secondary codec
|
|
docCamera (7) -- Document camera
|
|
projector (8) -- Projector
|
|
dviDevice (9) -- Device attached to DVI port
|
|
presentationCodec (10) -- CTS codec process presentation
|
|
-- stream
|
|
auxiliaryControlUnit (11) -- Auxiliary control unit
|
|
audioExpansionUnit (12) -- Audio expansion unit
|
|
microphone (13) -- Microphone
|
|
headset (14) -- Headset
|
|
positionMic (15) -- Position microphone
|
|
digitalMediaSystem (16) -- Digitial Media System
|
|
auxHDMIOuputDevice (17) -- Auxiliary HDMI output device
|
|
uiDevice (18) -- User Interface device for CTS
|
|
auxHDMIInputDevice (19) -- HDMI input enabled device
|
|
bringYourOwnDevice (20) -- Bring Your Own Device,
|
|
-- like PC,Laptop,Tablet etc"
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
other(1),
|
|
uplinkDevice(2),
|
|
ipPhone(3),
|
|
camera(4),
|
|
display(5),
|
|
secCodec(6),
|
|
docCamera(7),
|
|
projector(8),
|
|
dviDevice(9),
|
|
presentationCodec(10),
|
|
auxiliaryControlUnit(11),
|
|
audioExpansionUnit(12),
|
|
microphone(13),
|
|
headset(14),
|
|
positionMic(15),
|
|
digitialMediaSystem(16),
|
|
auxHDMIOutputDevice(17),
|
|
uiDevice(18),
|
|
auxHDMIInputDevice(19),
|
|
bringYourOwnDevice(20)
|
|
}
|
|
ciscoTelepresenceMIBNotifs OBJECT IDENTIFIER
|
|
::= { ciscoTelepresenceMIB 0 }
|
|
|
|
ciscoTelepresenceMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoTelepresenceMIB 1 }
|
|
|
|
ciscoTelepresenceMIBConform OBJECT IDENTIFIER
|
|
::= { ciscoTelepresenceMIB 2 }
|
|
|
|
ctpObjects OBJECT IDENTIFIER
|
|
::= { ciscoTelepresenceMIBObjects 1 }
|
|
|
|
ctpPeripheralStatusObjects OBJECT IDENTIFIER
|
|
::= { ciscoTelepresenceMIBObjects 2 }
|
|
|
|
ctpEventHistory OBJECT IDENTIFIER
|
|
::= { ciscoTelepresenceMIBObjects 3 }
|
|
|
|
|
|
-- Telepresence Management Configuration Group
|
|
|
|
ctpPeripheralErrorNotifyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object controls generation of
|
|
ctpPeripheralErrorNotification.
|
|
|
|
When the object is 'true(1)', generation of
|
|
ctpPeripheralErrorNotification is enabled.
|
|
When the object is 'false(2)', generation of
|
|
ctpPeripheralErrorNotification is disabled.
|
|
ctpPeripheralErrorNotifyEnable object is superseded by
|
|
ctpPeriStatusChangeNotifyEnable."
|
|
DEFVAL { false }
|
|
::= { ctpObjects 1 }
|
|
|
|
ctpSysUserAuthFailNotifyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls generation of
|
|
ctpSysUserAuthFailNotification.
|
|
|
|
When the object is 'true(1)', generation of
|
|
ctpSysUserAuthFailNotification is enabled.
|
|
When the object is 'false(2)', generation of
|
|
ctpSysUserAuthFailNotification is disabled."
|
|
DEFVAL { false }
|
|
::= { ctpObjects 2 }
|
|
|
|
ctpSystemReset OBJECT-TYPE
|
|
SYNTAX CtpSystemResetMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to reset or restart a Telepresence system."
|
|
DEFVAL { noRestart }
|
|
::= { ctpObjects 3 }
|
|
|
|
ctpPeriStatusChangeNotifyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls generation of
|
|
ctpPeriStatusChangeNotification.
|
|
|
|
When the object is 'true(1)', generation of
|
|
ctpPeriStatusChangeNotification is enabled.
|
|
When the object is 'false(2)', generation of
|
|
ctpPeriStatusChangeNotification is disabled."
|
|
DEFVAL { false }
|
|
::= { ctpObjects 4 }
|
|
|
|
ctpVlanId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Telepresence system VLAN ID."
|
|
::= { ctpObjects 5 }
|
|
|
|
ctpDefaultGatewayAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of address contained
|
|
in the corresponding instance of ctpDefaultGateway."
|
|
::= { ctpObjects 6 }
|
|
|
|
ctpDefaultGateway OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Telepresence system default gateway."
|
|
::= { ctpObjects 7 }
|
|
-- Telepresence Peripheral Status Group
|
|
--
|
|
|
|
--
|
|
-- Peripheral Status Table
|
|
|
|
ctpPeripheralStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtpPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains system peripheral information.
|
|
|
|
An entry in this table has a corresponding entry,
|
|
INDEX-ed by the same value of ctpPeripheralIndex,
|
|
in the table relevant to the type of interface:
|
|
ctpEtherPeripheralStatusTable for Ethernet,
|
|
ctpHDMIPeripheralStatusTable for HDMI or
|
|
ctpDVIPeripheralStatusTable for DVI."
|
|
::= { ctpPeripheralStatusObjects 1 }
|
|
|
|
ctpPeripheralStatusEntry OBJECT-TYPE
|
|
SYNTAX CtpPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains information about one peripheral which is
|
|
configured or detected by a Telepresence system."
|
|
INDEX { ctpPeripheralIndex }
|
|
::= { ctpPeripheralStatusTable 1 }
|
|
|
|
CtpPeripheralStatusEntry ::= SEQUENCE {
|
|
ctpPeripheralIndex Unsigned32,
|
|
ctpPeripheralDescription SnmpAdminString,
|
|
ctpPeripheralStatus CtpPeripheralStatusCode,
|
|
ctpPeripheralDeviceCategory CtpPeripheralDeviceCategoryCode,
|
|
ctpPeripheralDeviceNumber Unsigned32
|
|
}
|
|
|
|
ctpPeripheralIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a unique index for a peripheral
|
|
which is attached to a Telepresence system."
|
|
::= { ctpPeripheralStatusEntry 1 }
|
|
|
|
ctpPeripheralDescription OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a description of the attached peripheral.
|
|
|
|
Peripheral description may be the peripheral type, model and/or
|
|
version information or a peripheral signal description."
|
|
::= { ctpPeripheralStatusEntry 2 }
|
|
|
|
ctpPeripheralStatus OBJECT-TYPE
|
|
SYNTAX CtpPeripheralStatusCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a peripheral status."
|
|
::= { ctpPeripheralStatusEntry 3 }
|
|
|
|
ctpPeripheralDeviceCategory OBJECT-TYPE
|
|
SYNTAX CtpPeripheralDeviceCategoryCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a peripheral category of a device."
|
|
::= { ctpPeripheralStatusEntry 4 }
|
|
|
|
ctpPeripheralDeviceNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a device number for a peripheral.
|
|
|
|
Device number is unique within the same peripheral device
|
|
category."
|
|
::= { ctpPeripheralStatusEntry 5 }
|
|
|
|
|
|
-- Peripheral Status Table connected via Ethernet
|
|
|
|
ctpEtherPeripheralStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtpEtherPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains information about all peripherals
|
|
connected to the system via Ethernet port."
|
|
::= { ctpPeripheralStatusObjects 2 }
|
|
|
|
ctpEtherPeripheralStatusEntry OBJECT-TYPE
|
|
SYNTAX CtpEtherPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains information about one peripheral
|
|
attached to the Telepresence system via Ethernet."
|
|
INDEX {
|
|
ctpPeripheralIndex,
|
|
ctpEtherPeripheralIndex
|
|
}
|
|
::= { ctpEtherPeripheralStatusTable 1 }
|
|
|
|
CtpEtherPeripheralStatusEntry ::= SEQUENCE {
|
|
ctpEtherPeripheralIndex Unsigned32,
|
|
ctpEtherPeripheralIfIndex InterfaceIndexOrZero,
|
|
ctpEtherPeripheralAddrType InetAddressType,
|
|
ctpEtherPeripheralAddr InetAddress,
|
|
ctpEtherPeripheralStatus CtpPeripheralStatusCode
|
|
}
|
|
|
|
ctpEtherPeripheralIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a unique number for a peripheral
|
|
Ethernet interface.
|
|
|
|
If no peripheral has more than one Ethernet interface, this
|
|
object will have value '1'."
|
|
::= { ctpEtherPeripheralStatusEntry 1 }
|
|
|
|
ctpEtherPeripheralIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies an index value that uniquely identifies
|
|
the interface to which this entry is applicable. The
|
|
interface identified by a particular value of this index is
|
|
the same interface as identified by the same value of the
|
|
IF-MIB's ifIndex.
|
|
|
|
If this entry doesn't have corresponding ifIndex, then this
|
|
value will have value '0'."
|
|
::= { ctpEtherPeripheralStatusEntry 2 }
|
|
|
|
ctpEtherPeripheralAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of address contained
|
|
in the corresponding instance of ctpEtherPeripheralAddr."
|
|
::= { ctpEtherPeripheralStatusEntry 3 }
|
|
|
|
ctpEtherPeripheralAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the address of the attached peripheral
|
|
in the format given by the corresponding instance of
|
|
ctpEtherPeripheralAddrType."
|
|
::= { ctpEtherPeripheralStatusEntry 4 }
|
|
|
|
ctpEtherPeripheralStatus OBJECT-TYPE
|
|
SYNTAX CtpPeripheralStatusCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies attached peripheral status retrieved via
|
|
Ethernet port."
|
|
::= { ctpEtherPeripheralStatusEntry 5 }
|
|
|
|
|
|
-- Peripheral Status Table connected via HDMI
|
|
|
|
ctpHDMIPeripheralStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtpHDMIPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains information about all peripherals
|
|
connected to the system via HDMI."
|
|
::= { ctpPeripheralStatusObjects 3 }
|
|
|
|
ctpHDMIPeripheralStatusEntry OBJECT-TYPE
|
|
SYNTAX CtpHDMIPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains information about one Telepresence
|
|
HDMI peripheral."
|
|
INDEX {
|
|
ctpPeripheralIndex,
|
|
ctpHDMIPeripheralIndex
|
|
}
|
|
::= { ctpHDMIPeripheralStatusTable 1 }
|
|
|
|
CtpHDMIPeripheralStatusEntry ::= SEQUENCE {
|
|
ctpHDMIPeripheralIndex Unsigned32,
|
|
ctpHDMIPeripheralCableStatus CtpPeripheralCableCode,
|
|
ctpHDMIPeripheralPowerStatus CtpPeripheralPowerCode
|
|
}
|
|
|
|
ctpHDMIPeripheralIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a unique number for a peripheral HDMI.
|
|
|
|
If no peripheral has more than one HDMI, this
|
|
object will have value '1'."
|
|
::= { ctpHDMIPeripheralStatusEntry 1 }
|
|
|
|
ctpHDMIPeripheralCableStatus OBJECT-TYPE
|
|
SYNTAX CtpPeripheralCableCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies cable status of an attached peripheral.
|
|
|
|
This object is set to 'loose' if system detects cable is
|
|
'unplugged' but power is 'on'."
|
|
::= { ctpHDMIPeripheralStatusEntry 2 }
|
|
|
|
ctpHDMIPeripheralPowerStatus OBJECT-TYPE
|
|
SYNTAX CtpPeripheralPowerCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies power status of an attached peripheral.
|
|
|
|
This object is set to 'unknown' if system detects cable is
|
|
'unplugged'."
|
|
::= { ctpHDMIPeripheralStatusEntry 3 }
|
|
|
|
|
|
-- Peripheral Status Table connected via DVI
|
|
|
|
ctpDVIPeripheralStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtpDVIPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains information about all peripherals
|
|
connected to the system via DVI."
|
|
::= { ctpPeripheralStatusObjects 4 }
|
|
|
|
ctpDVIPeripheralStatusEntry OBJECT-TYPE
|
|
SYNTAX CtpDVIPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains information about one peripheral
|
|
attached to the Telepresence system via DVI."
|
|
INDEX {
|
|
ctpPeripheralIndex,
|
|
ctpDVIPeripheralIndex
|
|
}
|
|
::= { ctpDVIPeripheralStatusTable 1 }
|
|
|
|
CtpDVIPeripheralStatusEntry ::= SEQUENCE {
|
|
ctpDVIPeripheralIndex Unsigned32,
|
|
ctpDVIPeripheralCableStatus CtpPeripheralCableCode
|
|
}
|
|
|
|
ctpDVIPeripheralIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a unique number for a peripheral DVI.
|
|
|
|
If no peripheral has more than one DVI, this
|
|
object will have value '1'.
|
|
|
|
Note that some Telepresence systems have no DVI port and some
|
|
Telepresence systems have only one DVI port."
|
|
::= { ctpDVIPeripheralStatusEntry 1 }
|
|
|
|
ctpDVIPeripheralCableStatus OBJECT-TYPE
|
|
SYNTAX CtpPeripheralCableCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies attached device
|
|
cable status reported by DVI."
|
|
::= { ctpDVIPeripheralStatusEntry 2 }
|
|
|
|
|
|
-- Peripheral Status Table connected via RS-232
|
|
|
|
ctpRS232PeripheralStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtpRS232PeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains information about all peripherals
|
|
connected to the system via RS-232."
|
|
::= { ctpPeripheralStatusObjects 5 }
|
|
|
|
ctpRS232PeripheralStatusEntry OBJECT-TYPE
|
|
SYNTAX CtpRS232PeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains information about one peripheral
|
|
attached to the Telepresence system via RS-232."
|
|
INDEX {
|
|
ctpPeripheralIndex,
|
|
ctpRS232PeripheralIndex
|
|
}
|
|
::= { ctpRS232PeripheralStatusTable 1 }
|
|
|
|
CtpRS232PeripheralStatusEntry ::= SEQUENCE {
|
|
ctpRS232PeripheralIndex Unsigned32,
|
|
ctpRS232PortIndex InterfaceIndexOrZero,
|
|
ctpRS232PeripheralConnStatus INTEGER
|
|
}
|
|
|
|
ctpRS232PeripheralIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a unique number for a peripheral RS-232.
|
|
|
|
If no peripheral has more than one RS-232, this
|
|
object will have value '1'.
|
|
|
|
Note that some Telepresence systems have no RS-232 port."
|
|
::= { ctpRS232PeripheralStatusEntry 1 }
|
|
|
|
ctpRS232PortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies an index value that uniquely identifies
|
|
the RS-232 port to which this entry is applicable.
|
|
Its value is the same as RS-232-MIB's rs232PortIndex for
|
|
the port.
|
|
|
|
If RS-232-MIB is not supported by the agent, then this
|
|
value will have value '0'."
|
|
::= { ctpRS232PeripheralStatusEntry 2 }
|
|
|
|
ctpRS232PeripheralConnStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
connected(1),
|
|
unknown(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies peripheral which is
|
|
connected via RS232.
|
|
|
|
When the object is 'connected(1)', peripheral connection
|
|
via RS232 is working properly.
|
|
When the object is 'unknown(2)', peripheral connection
|
|
via RS232 is not working properly. It may due to device problem
|
|
or connection problem."
|
|
::= { ctpRS232PeripheralStatusEntry 3 }
|
|
|
|
|
|
-- Peripheral Attribute table
|
|
|
|
ctpPeripheralAttributeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtpPeripheralAttributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains information about attributes for the
|
|
peripherals which are connected to the system. Peripheral
|
|
attribute may specify peripheral's component information,
|
|
for example, an entry may specify lifetime of a lamp
|
|
on a presentation device."
|
|
::= { ctpPeripheralStatusObjects 6 }
|
|
|
|
ctpPeripheralAttributeEntry OBJECT-TYPE
|
|
SYNTAX CtpPeripheralAttributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains information about one peripheral
|
|
attribute related to the peripheral specified by
|
|
ctpPeripheralIndex."
|
|
INDEX {
|
|
ctpPeripheralIndex,
|
|
ctpPeripheralAttributeIndex
|
|
}
|
|
::= { ctpPeripheralAttributeTable 1 }
|
|
|
|
CtpPeripheralAttributeEntry ::= SEQUENCE {
|
|
ctpPeripheralAttributeIndex Unsigned32,
|
|
ctpPeripheralAttributeDescr INTEGER,
|
|
ctpPeripheralAttributeValue Unsigned32
|
|
}
|
|
|
|
ctpPeripheralAttributeIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a unique number for a peripheral
|
|
attribute.
|
|
|
|
If no peripheral has more than one attribute, this
|
|
object will have value '1'."
|
|
::= { ctpPeripheralAttributeEntry 1 }
|
|
|
|
ctpPeripheralAttributeDescr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
lampOperTime(1),
|
|
lampState(2),
|
|
powerSwitchState(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies description of a attribute.
|
|
The supported attributes are
|
|
lampOperTime(1) -- indicate the lamp operating time
|
|
of a peripheral
|
|
lampState(2) -- indicate the lamp state
|
|
powerSwitchState(3) -- indicate the power on/off state
|
|
of a peripheral
|
|
Note that not all peripheral contains all the supported
|
|
attributes. Agent reports whatever is available."
|
|
::= { ctpPeripheralAttributeEntry 2 }
|
|
|
|
ctpPeripheralAttributeValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies value of the attribute corresponding
|
|
to ctpPeripheralAttributeDescr.
|
|
The possible value of the supported attributes is listed as
|
|
the following:
|
|
Attribute Unit SYNTAX
|
|
-----------------------------------------------------------
|
|
lampOperTime hours Unsigned32(0..4294967295)
|
|
lampState INTEGER {
|
|
on(1),
|
|
off(2),
|
|
failure(3),
|
|
unknown(4)
|
|
}
|
|
powerSwitchState INTEGER {
|
|
on(1),
|
|
off(2),
|
|
unknown(3)
|
|
}"
|
|
::= { ctpPeripheralAttributeEntry 3 }
|
|
|
|
|
|
|
|
ctpUSBPeripheralStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtpUSBPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about all the peripherals
|
|
connected to the system via USB."
|
|
::= { ctpPeripheralStatusObjects 7 }
|
|
|
|
ctpUSBPeripheralStatusEntry OBJECT-TYPE
|
|
SYNTAX CtpUSBPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry drescribes a peripheral connected to the Telepresence
|
|
system through USB."
|
|
INDEX {
|
|
ctpPeripheralIndex,
|
|
ctpUSBPeripheralIndex
|
|
}
|
|
::= { ctpUSBPeripheralStatusTable 1 }
|
|
|
|
CtpUSBPeripheralStatusEntry ::= SEQUENCE {
|
|
ctpUSBPeripheralIndex Unsigned32,
|
|
ctpUSBPeripheralCableStatus CtpPeripheralCableCode,
|
|
ctpUSBPeripheralPowerStatus INTEGER,
|
|
ctpUSBPeripheralPortType INTEGER,
|
|
ctpUSBPeripheralPortRate INTEGER
|
|
}
|
|
|
|
ctpUSBPeripheralIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates an arbitrary positive, integer-value that
|
|
uniquely identifies the USB peripheral."
|
|
::= { ctpUSBPeripheralStatusEntry 1 }
|
|
|
|
ctpUSBPeripheralCableStatus OBJECT-TYPE
|
|
SYNTAX CtpPeripheralCableCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of the cable attaching the USB
|
|
peripheral."
|
|
::= { ctpUSBPeripheralStatusEntry 2 }
|
|
|
|
ctpUSBPeripheralPowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
self(2),
|
|
bus(3),
|
|
both(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the source of power for the
|
|
attached USB peripheral:
|
|
|
|
'unknown' - The source of power is unknown.
|
|
'self' - The USB peripheral is externally powered.
|
|
'bus' - The USB peripheral is powered by the USB bus.
|
|
'both' - The USB peripheral can be powered by both the
|
|
USB bus or self"
|
|
::= { ctpUSBPeripheralStatusEntry 3 }
|
|
|
|
ctpUSBPeripheralPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
host(1),
|
|
device(2),
|
|
hub(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of device
|
|
connected to the USB port:
|
|
|
|
'host' - no device os connected to the port
|
|
'device' - a usb device is connected to the port
|
|
'hub' - a usb hub is connected to the port"
|
|
::= { ctpUSBPeripheralStatusEntry 4 }
|
|
|
|
ctpUSBPeripheralPortRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
full(2),
|
|
high(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the current operational rate of
|
|
the USB peripheral:
|
|
|
|
'unknown' - The USB port rate is unknown
|
|
'low' - The USB port rate is at 1.5 Mbps.
|
|
'full' - The USB port rate is at 12 Mbps.
|
|
'high' - The USB port rate is at 480 Mbps."
|
|
::= { ctpUSBPeripheralStatusEntry 5 }
|
|
|
|
|
|
-- Peripheral Status Table connected via 802dot11
|
|
|
|
ctp802dot11PeripheralStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ctp802dot11PeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains information about all peripherals
|
|
connected to the system via 802dot11."
|
|
::= { ctpPeripheralStatusObjects 8 }
|
|
|
|
ctp802dot11PeripheralStatusEntry OBJECT-TYPE
|
|
SYNTAX Ctp802dot11PeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describes one Telepresence 802dot11 peripheral."
|
|
INDEX {
|
|
ctpPeripheralIndex,
|
|
ctp802dot11PeripheralIndex
|
|
}
|
|
::= { ctp802dot11PeripheralStatusTable 1 }
|
|
|
|
Ctp802dot11PeripheralStatusEntry ::= SEQUENCE {
|
|
ctp802dot11PeripheralIndex Unsigned32,
|
|
ctp802dot11PeripheralIfIndex InterfaceIndexOrZero,
|
|
ctp802dot11PeripheralAddrType InetAddressType,
|
|
ctp802dot11PeripheralAddr InetAddress,
|
|
ctp802dot11PeripheralLinkStrength Unsigned32,
|
|
ctp802dot11PeripheralLinkStatus CtpPeripheralCableCode
|
|
}
|
|
|
|
ctp802dot11PeripheralIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates an arbitrary positive, integer-value that
|
|
uniquely identifies the IEEE 802.11 peripheral."
|
|
::= { ctp802dot11PeripheralStatusEntry 1 }
|
|
|
|
ctp802dot11PeripheralIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates an index value that uniquely identifies
|
|
the interface to which this entry is applicable.
|
|
|
|
If this entry doesn't have corresponding ifIndex, then this
|
|
value will have value '0'."
|
|
::= { ctp802dot11PeripheralStatusEntry 2 }
|
|
|
|
ctp802dot11PeripheralAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of address indicated by the
|
|
corresponding instance of ctp802dot11PeripheralAddr."
|
|
::= { ctp802dot11PeripheralStatusEntry 3 }
|
|
|
|
ctp802dot11PeripheralAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the address of the attached peripheral
|
|
in the format indicated by the corresponding instance of
|
|
ctp802dot11PeripheralAddrType."
|
|
::= { ctp802dot11PeripheralStatusEntry 4 }
|
|
|
|
ctp802dot11PeripheralLinkStrength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the link strength of an IEEE 802.11 link
|
|
for a peripheral. A return value of 0 indicates the link is not
|
|
connected. A return value between 1 - 5 indicates the strength
|
|
of the link, with 1 being the weakest and 5 being the
|
|
strongest."
|
|
::= { ctp802dot11PeripheralStatusEntry 5 }
|
|
|
|
-- changed to link status. This field is to represent the link status of
|
|
-- the 802dot11 link.
|
|
|
|
ctp802dot11PeripheralLinkStatus OBJECT-TYPE
|
|
SYNTAX CtpPeripheralCableCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the link status of the attached
|
|
peripheral via IEEE 802.11 link."
|
|
::= { ctp802dot11PeripheralStatusEntry 6 }
|
|
|
|
|
|
-- Peripheral Status Table connected via DP
|
|
|
|
ctpDPPeripheralStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtpDPPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains information about all peripherals
|
|
connected to the system via DP."
|
|
::= { ctpPeripheralStatusObjects 9 }
|
|
|
|
ctpDPPeripheralStatusEntry OBJECT-TYPE
|
|
SYNTAX CtpDPPeripheralStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains information about one Telepresence
|
|
DP peripheral."
|
|
INDEX {
|
|
ctpPeripheralIndex,
|
|
ctpDPPeripheralIndex
|
|
}
|
|
::= { ctpDPPeripheralStatusTable 1 }
|
|
|
|
CtpDPPeripheralStatusEntry ::= SEQUENCE {
|
|
ctpDPPeripheralIndex Unsigned32,
|
|
ctpDPPeripheralCableStatus CtpPeripheralCableCode,
|
|
ctpDPPeripheralPowerStatus CtpPeripheralPowerCode
|
|
}
|
|
|
|
ctpDPPeripheralIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates a unique number for a peripheral DP.
|
|
|
|
If no peripheral has more than one DP, this
|
|
object will have value '1'."
|
|
::= { ctpDPPeripheralStatusEntry 1 }
|
|
|
|
ctpDPPeripheralCableStatus OBJECT-TYPE
|
|
SYNTAX CtpPeripheralCableCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the cable status of a peripheral which
|
|
is attached to the system via Display Port interface.
|
|
|
|
This object returns 'loose' if system detects cable is
|
|
'unplugged' but power is 'on'."
|
|
::= { ctpDPPeripheralStatusEntry 2 }
|
|
|
|
ctpDPPeripheralPowerStatus OBJECT-TYPE
|
|
SYNTAX CtpPeripheralPowerCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the power status of a peripheral which
|
|
is attached to the system via Display Port interface.
|
|
|
|
This object returns 'unknown' if system detects cable is
|
|
'unplugged'."
|
|
::= { ctpDPPeripheralStatusEntry 3 }
|
|
|
|
|
|
|
|
-- Event History Group
|
|
--
|
|
|
|
-- Telepresence Peripheral Error History Table
|
|
|
|
ctpPeripheralErrorHistTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the maximum number of entries that the
|
|
ctpPeripheralErrorHistTable can contain. When the
|
|
capacity of the ctpPeripheralErrorHistTable has reached
|
|
the value specified by this object, then the agent
|
|
deletes the oldest entity in order to accommodate
|
|
the new entry. A value of '0' prevents any history
|
|
from being retained.
|
|
|
|
Some agents restrict the value of this object to be less than
|
|
500."
|
|
DEFVAL { 10 }
|
|
::= { ctpEventHistory 1 }
|
|
|
|
ctpPeripheralErrorHistLastIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the value of the
|
|
ctpPeripheralErrorHistIndex object corresponding to the
|
|
last entry added to the table by the agent.
|
|
|
|
If the management application uses the notifications defined
|
|
by this module, then it can poll this object to determine
|
|
whether it has missed a notification sent by the agent."
|
|
::= { ctpEventHistory 2 }
|
|
|
|
ctpPeripheralErrorHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtpPeripheralErrorHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a history of the detected peripheral
|
|
status changes.
|
|
|
|
After a management agent restart, when sysUpTime is reset to
|
|
zero, this table records all notifications until such time as
|
|
it becomes full. Thereafter, it remains full by retaining the
|
|
number of most recent notifications specified in
|
|
ctpPeripheralErrorHistTableSize."
|
|
::= { ctpEventHistory 3 }
|
|
|
|
ctpPeripheralErrorHistoryEntry OBJECT-TYPE
|
|
SYNTAX CtpPeripheralErrorHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains information about a Telepresence
|
|
peripheral status changes."
|
|
INDEX { ctpPeripheralErrorHistoryIndex }
|
|
::= { ctpPeripheralErrorHistoryTable 1 }
|
|
|
|
CtpPeripheralErrorHistoryEntry ::= SEQUENCE {
|
|
ctpPeripheralErrorHistoryIndex Unsigned32,
|
|
ctpPeripheralErrorIndex Unsigned32,
|
|
ctpPeripheralErrorStatus CtpPeripheralStatusCode,
|
|
ctpPeripheralErrorTimeStamp TimeStamp,
|
|
ctpPeripheralErrorDeviceCategory CtpPeripheralDeviceCategoryCode,
|
|
ctpPeripheralErrorDeviceNumber Unsigned32
|
|
}
|
|
|
|
ctpPeripheralErrorHistoryIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique non-zero integer value that identifies a
|
|
CtpPeripheralErrorHistoryEntry in the table.
|
|
|
|
The value of this index starts from '1' and monotonically
|
|
increases for each peripheral error known to the agent.
|
|
If the value of this object is '4294967295',
|
|
the agent will use '1' as the value of the
|
|
next detected peripheral status change."
|
|
::= { ctpPeripheralErrorHistoryEntry 1 }
|
|
|
|
ctpPeripheralErrorIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the value of ctpPeripheralIndex of a
|
|
peripheral which is in error state.
|
|
|
|
This object is deprecated in favor of
|
|
ctpPeripheralErrorDeviceCategory and
|
|
ctpPeripheralErrorDeviceNumber."
|
|
::= { ctpPeripheralErrorHistoryEntry 2 }
|
|
|
|
ctpPeripheralErrorStatus OBJECT-TYPE
|
|
SYNTAX CtpPeripheralStatusCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the peripheral status after its status
|
|
changed."
|
|
::= { ctpPeripheralErrorHistoryEntry 3 }
|
|
|
|
ctpPeripheralErrorTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the value of the sysUpTime object at the
|
|
time the notification was generated."
|
|
::= { ctpPeripheralErrorHistoryEntry 4 }
|
|
|
|
ctpPeripheralErrorDeviceCategory OBJECT-TYPE
|
|
SYNTAX CtpPeripheralDeviceCategoryCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies peripheral device category after its
|
|
status changed."
|
|
::= { ctpPeripheralErrorHistoryEntry 5 }
|
|
|
|
ctpPeripheralErrorDeviceNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies peripheral device number after its
|
|
status changed.
|
|
|
|
Device number is unique within the same peripheral device
|
|
category."
|
|
::= { ctpPeripheralErrorHistoryEntry 6 }
|
|
|
|
|
|
|
|
-- User Authentication Failure History Table
|
|
|
|
ctpSysUserAuthFailHistTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of entries that the
|
|
ctpSysUserAuthFailHistTable can contain. When the
|
|
capacity of the ctpSysUserAuthFailHistTable has reached
|
|
the value specified by this object, then the agent
|
|
deletes the oldest entity in order to accommodate
|
|
the new entry. A value of '0' prevents any history
|
|
from being retained.
|
|
|
|
Some agents restrict the value of this object to be less than
|
|
500."
|
|
DEFVAL { 10 }
|
|
::= { ctpEventHistory 4 }
|
|
|
|
ctpSysUserAuthFailHistLastIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the value of the
|
|
ctpSysUserAuthFailHistIndex object corresponding to the
|
|
last entry added to the table by the agent.
|
|
|
|
If the management application uses the notifications defined
|
|
by this module, then it can poll this object to determine
|
|
whether it has missed a notification sent by the agent."
|
|
::= { ctpEventHistory 5 }
|
|
|
|
ctpSysUserAuthFailHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtpSysUserAuthFailHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a history of detected user
|
|
authentication failures.
|
|
|
|
After a management agent restart, when sysUpTime is reset
|
|
to zero, this table records all user authentication failure
|
|
notifications until such time as it becomes full. Thereafter,
|
|
it remains full by retaining the number of most recent
|
|
notifications specified in ctpSysUserAuthFailHistTableSize."
|
|
::= { ctpEventHistory 6 }
|
|
|
|
ctpSysUserAuthFailHistoryEntry OBJECT-TYPE
|
|
SYNTAX CtpSysUserAuthFailHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains information about a Telepresence
|
|
system user authentication failure."
|
|
INDEX { ctpSysUserAuthFailHistoryIndex }
|
|
::= { ctpSysUserAuthFailHistoryTable 1 }
|
|
|
|
CtpSysUserAuthFailHistoryEntry ::= SEQUENCE {
|
|
ctpSysUserAuthFailHistoryIndex Unsigned32,
|
|
ctpSysUserAuthFailSourceAddrType InetAddressType,
|
|
ctpSysUserAuthFailSourceAddr InetAddress,
|
|
ctpSysUserAuthFailSourcePort Unsigned32,
|
|
ctpSysUserAuthFailUserName SnmpAdminString,
|
|
ctpSysUserAuthFailAccessProtocol CtpSystemAccessProtocol,
|
|
ctpSysUserAuthFailTimeStamp TimeStamp
|
|
}
|
|
|
|
ctpSysUserAuthFailHistoryIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique non-zero integer value that identifies a
|
|
CtpSysUserAuthFailHistoryEntry in the table.
|
|
|
|
The value of this index starts from '1' and monotonically
|
|
increases for each system authentication failure event
|
|
known to the agent. If the value of this object is
|
|
'4294967295', the agent will use '1' as the value of
|
|
the next user authentication failure event."
|
|
::= { ctpSysUserAuthFailHistoryEntry 1 }
|
|
|
|
ctpSysUserAuthFailSourceAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the type of address contained
|
|
in the corresponding instance of ctpSysUserAuthFailSourceAddr."
|
|
::= { ctpSysUserAuthFailHistoryEntry 2 }
|
|
|
|
ctpSysUserAuthFailSourceAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the source address when the
|
|
user authentication failure occurred, in the format given by
|
|
the corresponding instance of ctpSysUserAuthFailSourceAddrType."
|
|
::= { ctpSysUserAuthFailHistoryEntry 3 }
|
|
|
|
ctpSysUserAuthFailSourcePort OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the source TCP/UDP port number
|
|
when a user authentication failure occurred."
|
|
::= { ctpSysUserAuthFailHistoryEntry 4 }
|
|
|
|
ctpSysUserAuthFailUserName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the user name which was used to gain
|
|
system access when authentication failure occurred."
|
|
::= { ctpSysUserAuthFailHistoryEntry 5 }
|
|
|
|
ctpSysUserAuthFailAccessProtocol OBJECT-TYPE
|
|
SYNTAX CtpSystemAccessProtocol
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the access protocol when a user
|
|
authentication failure occurred."
|
|
::= { ctpSysUserAuthFailHistoryEntry 6 }
|
|
|
|
ctpSysUserAuthFailTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the value of the sysUpTime object at the
|
|
time the notification was generated."
|
|
::= { ctpSysUserAuthFailHistoryEntry 7 }
|
|
|
|
|
|
|
|
-- Telepresence System Notifications
|
|
|
|
ctpPeripheralErrorNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ctpPeripheralErrorIndex,
|
|
ctpPeripheralErrorStatus
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This notification is sent when a peripheral error is detected.
|
|
This notification is deprecated in favor of
|
|
ctpPeriStatusChangeNotification.
|
|
ctpPeripheralErrorNotification object is superseded by
|
|
ctpPeriStatusChangeNotification."
|
|
::= { ciscoTelepresenceMIBNotifs 1 }
|
|
|
|
ctpSysUserAuthFailNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ctpSysUserAuthFailSourceAddrType,
|
|
ctpSysUserAuthFailSourceAddr,
|
|
ctpSysUserAuthFailSourcePort,
|
|
ctpSysUserAuthFailUserName,
|
|
ctpSysUserAuthFailAccessProtocol
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent when a user authentication failure
|
|
via a Telepresence supported access protocol is
|
|
detected."
|
|
::= { ciscoTelepresenceMIBNotifs 2 }
|
|
|
|
ctpPeriStatusChangeNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ctpPeripheralErrorIndex,
|
|
ctpPeripheralErrorDeviceCategory,
|
|
ctpPeripheralErrorDeviceNumber,
|
|
ctpPeripheralErrorStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent when a peripheral status is changed."
|
|
::= { ciscoTelepresenceMIBNotifs 3 }
|
|
-- Conformance
|
|
|
|
ciscoTelepresenceCompliances OBJECT IDENTIFIER
|
|
::= { ciscoTelepresenceMIBConform 1 }
|
|
|
|
ciscoTelepresenceMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoTelepresenceMIBConform 2 }
|
|
|
|
|
|
ciscoTelepresenceCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
Cisco Telepresence MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoTpConfigurationGroup,
|
|
ciscoTpPeripheralStatusGroup,
|
|
ciscoTpEventHistoryGroup,
|
|
ciscoTpNotificationGroup
|
|
}
|
|
|
|
OBJECT ctpPeripheralErrorNotifyEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSysUserAuthFailNotifyEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSystemReset
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpPeripheralErrorHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSysUserAuthFailHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { ciscoTelepresenceCompliances 1 }
|
|
|
|
ciscoTelepresenceComplianceR01 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
Cisco Telepresence MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoTpConfigurationGroup,
|
|
ciscoTpPeripheralStatusGroup,
|
|
ciscoTpEventHistoryGroup,
|
|
ciscoTpNotificationGroup
|
|
}
|
|
|
|
GROUP ciscoTpRS232PeripheralStatusGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for a Telepresence system which
|
|
has RS323 interface."
|
|
|
|
GROUP ciscoTpPeripheralAttributeGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
|
|
OBJECT ctpPeripheralErrorNotifyEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSysUserAuthFailNotifyEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSystemReset
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpPeripheralErrorHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSysUserAuthFailHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { ciscoTelepresenceCompliances 2 }
|
|
|
|
ciscoTelepresenceComplianceR02 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
Cisco Telepresence MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoTpConfigurationGroupR01,
|
|
ciscoTpPeripheralStatusGroupR01,
|
|
ciscoTpEventHistoryGroupR01,
|
|
ciscoTpNotificationGroupR01
|
|
}
|
|
|
|
GROUP ciscoTpRS232PeripheralStatusGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for a Telepresence system which
|
|
has RS323 interface."
|
|
|
|
GROUP ciscoTpPeripheralAttributeGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
|
|
OBJECT ctpSysUserAuthFailNotifyEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSystemReset
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpPeriStatusChangeNotifyEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSysUserAuthFailHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpPeripheralErrorHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { ciscoTelepresenceCompliances 3 }
|
|
|
|
ciscoTelepresenceComplianceR03 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
Cisco Telepresence MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoTpConfigurationGroupR01,
|
|
ciscoTpPeripheralStatusGroupR02,
|
|
ciscoTpEventHistoryGroupR01,
|
|
ciscoTpNotificationGroupR01
|
|
}
|
|
|
|
GROUP ciscoTpRS232PeripheralStatusGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for a Telepresence system which
|
|
has RS323 interface."
|
|
|
|
GROUP ciscoTpPeripheralAttributeGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
|
|
OBJECT ctpSysUserAuthFailNotifyEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSystemReset
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSysUserAuthFailHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpPeripheralErrorHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { ciscoTelepresenceCompliances 4 }
|
|
|
|
ciscoTelepresenceComplianceR04 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
Cisco Telepresence MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoTpConfigurationGroupR01,
|
|
ciscoTpConfigurationGroupR02,
|
|
ciscoTpPeripheralStatusGroupR02,
|
|
ciscoTpEventHistoryGroupR01,
|
|
ciscoTpNotificationGroupR01
|
|
}
|
|
|
|
GROUP ciscoTpRS232PeripheralStatusGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for a Telepresence system which
|
|
has RS323 interface."
|
|
|
|
GROUP ciscoTpPeripheralAttributeGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
|
|
OBJECT ctpSysUserAuthFailNotifyEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSystemReset
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSysUserAuthFailHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpPeripheralErrorHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { ciscoTelepresenceCompliances 5 }
|
|
|
|
ciscoTelepresenceComplianceR05 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
Cisco Telepresence MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoTpConfigurationGroupR01,
|
|
ciscoTpConfigurationGroupR02,
|
|
ciscoTpPeripheralStatusGroupR02,
|
|
ciscoTpEventHistoryGroupR01,
|
|
ciscoTpNotificationGroupR01
|
|
}
|
|
|
|
GROUP ciscoTpDPPeripheralStatusGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
|
|
GROUP ciscoTpRS232PeripheralStatusGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for a Telepresence system which
|
|
has RS323 interface."
|
|
|
|
GROUP ciscoTpPeripheralAttributeGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
|
|
OBJECT ctpSysUserAuthFailNotifyEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSystemReset
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpSysUserAuthFailHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ctpPeripheralErrorHistTableSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { ciscoTelepresenceCompliances 6 }
|
|
|
|
-- Units of Conformance
|
|
|
|
ciscoTpConfigurationGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpPeripheralErrorNotifyEnable,
|
|
ctpSysUserAuthFailNotifyEnable,
|
|
ctpSystemReset
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing the notification
|
|
configuration and system reset.
|
|
ciscoTpConfigurationGroup object is superseded by
|
|
ciscoTpConfigurationGroupR01."
|
|
::= { ciscoTelepresenceMIBGroups 1 }
|
|
|
|
ciscoTpPeripheralStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpPeripheralDescription,
|
|
ctpPeripheralStatus,
|
|
ctpEtherPeripheralIfIndex,
|
|
ctpEtherPeripheralAddrType,
|
|
ctpEtherPeripheralAddr,
|
|
ctpEtherPeripheralStatus,
|
|
ctpHDMIPeripheralCableStatus,
|
|
ctpHDMIPeripheralPowerStatus,
|
|
ctpDVIPeripheralCableStatus
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing the Telepresence peripheral
|
|
information.
|
|
ciscoTpPeripheralStatusGroup object is superseded by
|
|
ciscoTpPeripheralStatusGroupR01."
|
|
::= { ciscoTelepresenceMIBGroups 2 }
|
|
|
|
ciscoTpEventHistoryGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpPeripheralErrorHistTableSize,
|
|
ctpPeripheralErrorHistLastIndex,
|
|
ctpPeripheralErrorIndex,
|
|
ctpPeripheralErrorStatus,
|
|
ctpPeripheralErrorTimeStamp,
|
|
ctpSysUserAuthFailHistTableSize,
|
|
ctpSysUserAuthFailHistLastIndex,
|
|
ctpSysUserAuthFailSourceAddrType,
|
|
ctpSysUserAuthFailSourceAddr,
|
|
ctpSysUserAuthFailSourcePort,
|
|
ctpSysUserAuthFailUserName,
|
|
ctpSysUserAuthFailAccessProtocol,
|
|
ctpSysUserAuthFailTimeStamp
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of managed objects providing notification event
|
|
history information.
|
|
ciscoTpEventHistoryGroup object is superseded by
|
|
ciscoTpEventHistoryGroupR01."
|
|
::= { ciscoTelepresenceMIBGroups 3 }
|
|
|
|
ciscoTpNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ctpPeripheralErrorNotification,
|
|
ctpSysUserAuthFailNotification
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of Telepresence system notifications.
|
|
ciscoTpNotificationGroup object is superseded by
|
|
ciscoTpNotificationGroupR01."
|
|
::= { ciscoTelepresenceMIBGroups 4 }
|
|
|
|
ciscoTpRS232PeripheralStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpRS232PortIndex,
|
|
ctpRS232PeripheralConnStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the information
|
|
about Telepresence peripheral which is connected via RS232."
|
|
::= { ciscoTelepresenceMIBGroups 5 }
|
|
|
|
ciscoTpPeripheralAttributeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpPeripheralAttributeDescr,
|
|
ctpPeripheralAttributeValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects providing peripheral
|
|
attribute information."
|
|
::= { ciscoTelepresenceMIBGroups 6 }
|
|
|
|
ciscoTpPeripheralStatusGroupR01 OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpPeripheralDescription,
|
|
ctpPeripheralStatus,
|
|
ctpPeripheralDeviceCategory,
|
|
ctpPeripheralDeviceNumber,
|
|
ctpEtherPeripheralIfIndex,
|
|
ctpEtherPeripheralAddrType,
|
|
ctpEtherPeripheralAddr,
|
|
ctpEtherPeripheralStatus,
|
|
ctpHDMIPeripheralCableStatus,
|
|
ctpHDMIPeripheralPowerStatus,
|
|
ctpDVIPeripheralCableStatus
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing the Telepresence peripheral
|
|
information.
|
|
ciscoTpPeripheralStatusGroupR01 object is superseded by
|
|
ciscoTpPeripheralStatusGroupR02."
|
|
::= { ciscoTelepresenceMIBGroups 7 }
|
|
|
|
ciscoTpEventHistoryGroupR01 OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpPeripheralErrorHistTableSize,
|
|
ctpPeripheralErrorHistLastIndex,
|
|
ctpPeripheralErrorIndex,
|
|
ctpPeripheralErrorStatus,
|
|
ctpPeripheralErrorTimeStamp,
|
|
ctpPeripheralErrorDeviceCategory,
|
|
ctpPeripheralErrorDeviceNumber,
|
|
ctpSysUserAuthFailHistTableSize,
|
|
ctpSysUserAuthFailHistLastIndex,
|
|
ctpSysUserAuthFailSourceAddrType,
|
|
ctpSysUserAuthFailSourceAddr,
|
|
ctpSysUserAuthFailSourcePort,
|
|
ctpSysUserAuthFailUserName,
|
|
ctpSysUserAuthFailAccessProtocol,
|
|
ctpSysUserAuthFailTimeStamp
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects providing notification event
|
|
history information."
|
|
::= { ciscoTelepresenceMIBGroups 8 }
|
|
|
|
ciscoTpNotificationGroupR01 NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ctpPeriStatusChangeNotification,
|
|
ctpSysUserAuthFailNotification
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Telepresence system notifications."
|
|
::= { ciscoTelepresenceMIBGroups 9 }
|
|
|
|
ciscoTpConfigurationGroupR01 OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpSysUserAuthFailNotifyEnable,
|
|
ctpSystemReset,
|
|
ctpPeriStatusChangeNotifyEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the notification
|
|
configuration and system reset."
|
|
::= { ciscoTelepresenceMIBGroups 10 }
|
|
|
|
ciscoTpPeripheralStatusGroupR02 OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpPeripheralDescription,
|
|
ctpPeripheralStatus,
|
|
ctpPeripheralDeviceCategory,
|
|
ctpPeripheralDeviceNumber,
|
|
ctpEtherPeripheralIfIndex,
|
|
ctpEtherPeripheralAddrType,
|
|
ctpEtherPeripheralAddr,
|
|
ctpEtherPeripheralStatus,
|
|
ctpHDMIPeripheralCableStatus,
|
|
ctpHDMIPeripheralPowerStatus,
|
|
ctpDVIPeripheralCableStatus,
|
|
ctpUSBPeripheralCableStatus,
|
|
ctpUSBPeripheralPowerStatus,
|
|
ctpUSBPeripheralPortType,
|
|
ctpUSBPeripheralPortRate,
|
|
ctp802dot11PeripheralIfIndex,
|
|
ctp802dot11PeripheralAddrType,
|
|
ctp802dot11PeripheralAddr,
|
|
ctp802dot11PeripheralLinkStrength,
|
|
ctp802dot11PeripheralLinkStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the Telepresence peripheral
|
|
information."
|
|
::= { ciscoTelepresenceMIBGroups 11 }
|
|
|
|
ciscoTpConfigurationGroupR02 OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpVlanId,
|
|
ctpDefaultGateway,
|
|
ctpDefaultGatewayAddrType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing network configurations."
|
|
::= { ciscoTelepresenceMIBGroups 12 }
|
|
|
|
ciscoTpDPPeripheralStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ctpDPPeripheralCableStatus,
|
|
ctpDPPeripheralPowerStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the information
|
|
about Telepresence peripheral which is connected via
|
|
Display Port."
|
|
::= { ciscoTelepresenceMIBGroups 13 }
|
|
|
|
END
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|