1638 lines
54 KiB
Plaintext
1638 lines
54 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-SWITCH-MULTICAST-MIB.my
|
|
--
|
|
-- January 2006, Jayakumar Kadirvelu
|
|
--
|
|
-- Copyright (c) 2006, 2008, 2009, 2010 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
--
|
|
CISCO-SWITCH-MULTICAST-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
TimeStamp,
|
|
RowStatus,
|
|
TruthValue,
|
|
StorageType
|
|
FROM SNMPv2-TC
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Gauge32,
|
|
Integer32,
|
|
Counter64
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ciscoMgmt
|
|
FROM CISCO-SMI
|
|
InterfaceIndex,
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
CiscoInterfaceIndexList,
|
|
EntPhysicalIndexOrZero
|
|
FROM CISCO-TC
|
|
entPhysicalIndex
|
|
FROM ENTITY-MIB
|
|
MplsVpnId
|
|
FROM MPLS-VPN-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
InetAddressType,
|
|
InetAddress,
|
|
InetAddressPrefixLength
|
|
FROM INET-ADDRESS-MIB;
|
|
|
|
ciscoSwitchMulticastMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201005270001Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-lan-switch-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB module defines management objects for the
|
|
Multicast Switching features on Cisco Layer 2/3
|
|
devices.
|
|
|
|
Definition of some of the terms used in this MIB:
|
|
|
|
Multicast Replication - The mechanism by which a
|
|
system creates one or more copies of a multicast
|
|
packet for forwarding.
|
|
|
|
Ingress Multicast Replication - A type of multicast
|
|
replication where the replication engine on the
|
|
ingress module always performs the whole replication.
|
|
|
|
Egress Multicast Replication - A type of multicast
|
|
replication where the replication engines on both
|
|
the ingress and egress modules perform the replication.
|
|
|
|
VPN - Virtual private network.
|
|
A secure IP-based network that shares resources
|
|
with one or more physical networks.
|
|
|
|
VRF - VPN Routing and Forwarding instance
|
|
Consists of an IP routing table, a derived
|
|
forwarding table, a set of interfaces that use
|
|
the forwarding table, and a set of rules and
|
|
routing protocols that determine what goes into
|
|
the forwarding table.
|
|
|
|
MVPN - Multicast VPN
|
|
|
|
MVRF - Multicast VRF
|
|
A VRF which has multicast routing enabled.
|
|
|
|
VRF-lite - A feature that enables a service
|
|
provider to support two or more VPNs, where IP
|
|
addresses can be overlapped among the VPNs.
|
|
|
|
LTL - Local Target Logic
|
|
A hardware resource table to aid in switching.
|
|
|
|
OIF - Outgoing Interface
|
|
The interface through which packets are
|
|
forwarded out.
|
|
|
|
DF - Designated Forwarder."
|
|
|
|
REVISION "201005270001Z"
|
|
DESCRIPTION
|
|
"Added the following groups:
|
|
cswmGlobalReplicationGroup
|
|
cswmMvrfBiDirPimDfUsageGroup
|
|
cswmForwardingGroup
|
|
cswmFlowQueryResultGroup"
|
|
REVISION "200803200000Z"
|
|
DESCRIPTION
|
|
"Added cswmBiDirPimDfUsageGroup.
|
|
Added cswmLtlUsageGroup.
|
|
Corrected the enum value of cswmReplConfigCurMode:
|
|
From 'egress' to 'egressAndIngress'."
|
|
|
|
REVISION "200601060000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoMgmt 504 }
|
|
|
|
cswmMIBNotifs OBJECT IDENTIFIER ::= { ciscoSwitchMulticastMIB 0 }
|
|
cswmMIBObjects OBJECT IDENTIFIER ::= { ciscoSwitchMulticastMIB 1 }
|
|
cswmMIBConform OBJECT IDENTIFIER ::= { ciscoSwitchMulticastMIB 2 }
|
|
|
|
-- Overview of MIB Objects:
|
|
--
|
|
-- Defines 7 groups of objects
|
|
-- 1. cswmGlobal : A group of objects providing global
|
|
-- multicast switching information and
|
|
-- configuration
|
|
--
|
|
-- 2. cswmReplication : A group of objects related to
|
|
-- multicast replication.
|
|
--
|
|
-- 3. cswmMvrfStats : A group of objects providing
|
|
-- MVRF statistics.
|
|
--
|
|
-- 4. cswmBiDirPimDfStats : A group of objects providing
|
|
-- Bi-directional PIM (Protocol
|
|
-- Independent Multicast) Designated
|
|
-- Forwarder database statistics.
|
|
--
|
|
-- 5. cswmLtlStats : A group of objects providing
|
|
-- Multicast LTL (Local Target Logic)
|
|
-- statistics.
|
|
--
|
|
-- 6. cswmForwarding : A group of objects providing
|
|
-- Multicast Forwarding information
|
|
--
|
|
-- 7. cswmFlowQueryResult : A group of objects providing
|
|
-- Multicast Flow information through
|
|
-- Query/Result mechanism
|
|
--
|
|
|
|
|
|
cswmGlobal OBJECT IDENTIFIER ::= { cswmMIBObjects 1 }
|
|
cswmReplication OBJECT IDENTIFIER ::= { cswmMIBObjects 2 }
|
|
cswmMvrfStats OBJECT IDENTIFIER ::= { cswmMIBObjects 3 }
|
|
cswmBiDirPimDfStats
|
|
OBJECT IDENTIFIER ::= { cswmMIBObjects 4 }
|
|
cswmLtlStats OBJECT IDENTIFIER ::= { cswmMIBObjects 5 }
|
|
cswmForwarding
|
|
OBJECT IDENTIFIER ::= { cswmMIBObjects 6 }
|
|
cswmFlowQueryResult
|
|
OBJECT IDENTIFIER ::= { cswmMIBObjects 7 }
|
|
|
|
|
|
cswmMvpnHwSwitchingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notCapable(1),
|
|
enable(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the MVPN hardware switching status.
|
|
|
|
'notCapable' - This device is not capable of MVPN
|
|
hardware switching
|
|
|
|
'enable' - MVPN hardware switching is enabled.
|
|
|
|
'disable' - MVPN hardware switching is disabled."
|
|
::= { cswmGlobal 1 }
|
|
|
|
cswmVrfLiteStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notCapable(1),
|
|
enable(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the VRF-Lite switching status.
|
|
|
|
'notCapable' - This device is not capable of VRF-Lite
|
|
switching.
|
|
|
|
'enable' - VRF-Lite switching is enabled.
|
|
|
|
'disable' - VRF-Lite switching is disabled."
|
|
::= { cswmGlobal 2 }
|
|
|
|
cswmMRouteConsistCheck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notCapable(1), -- read-only
|
|
enable(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the Multicast Routing(mroute) Table
|
|
consistency checker support mode.
|
|
The consistency checker scans the mroute table
|
|
and assures that multicast-hardware entries are
|
|
consistent with mroute table.
|
|
|
|
'notCapable' - This device is not capable of mroute
|
|
consistency checker
|
|
|
|
'enable' - mroute consistency checker is enabled.
|
|
|
|
'disable' - mroute consistency checker is disabled.
|
|
|
|
When the value of this object is 'notCapable' the object
|
|
value is not writable.
|
|
The value 'notCapable' can not be set."
|
|
::= { cswmGlobal 3 }
|
|
|
|
cswmProcessorConsistCheck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notCapable(1), -- read-only
|
|
enable(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the Processor consistency checker support mode.
|
|
In a multiple processor device, the consistency checker
|
|
assures that multicast flow entries are consistent across
|
|
processors.
|
|
|
|
Example: In a Catalyst 6000 series device, which has a
|
|
Route Processor (RP) and a Switch Processor (SP), the
|
|
consistency checker assures that multicast flow entries on
|
|
the Route Processor and the Switch Processor are consistent.
|
|
|
|
'notCapable' - This device is not capable of processor
|
|
consistency checker
|
|
|
|
'enable' - processor consistency checker is enabled.
|
|
|
|
'disable' - processor consistency checker is disabled.
|
|
|
|
When the value of this object is 'notCapable' the object
|
|
value is not writable.
|
|
The value 'notCapable' can not be set."
|
|
::= { cswmGlobal 4 }
|
|
|
|
--
|
|
-- Multicast Replication Capability information
|
|
--
|
|
cswmReplCapabilityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CswmReplCapabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing multicast replication capability
|
|
information."
|
|
::= { cswmReplication 1 }
|
|
|
|
cswmReplCapabilityEntry OBJECT-TYPE
|
|
SYNTAX CswmReplCapabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row of cswmReplCapabilityTable, containing
|
|
the multicast replication capability information for
|
|
per module (identified by entPhysicalIndex) per Internet
|
|
address type supported on the managed system.
|
|
|
|
An entry is created by the agent at the system power-up or
|
|
module insertion."
|
|
INDEX { entPhysicalIndex, cswmReplConfigAddrType }
|
|
::= { cswmReplCapabilityTable 1 }
|
|
|
|
CswmReplCapabilityEntry ::= SEQUENCE {
|
|
cswmReplCapability BITS
|
|
}
|
|
|
|
cswmReplCapability OBJECT-TYPE
|
|
SYNTAX BITS { ingress(0), egress(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the multicast replication capability.
|
|
The replication capability of a module for a particular
|
|
address type is dependent on the hardware and software
|
|
capabilities of the module."
|
|
::= { cswmReplCapabilityEntry 1 }
|
|
|
|
--
|
|
-- Multicast Flow Replication Config table
|
|
--
|
|
cswmReplConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CswmReplConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing multicast flow replication information
|
|
for the device."
|
|
::= { cswmReplication 2 }
|
|
|
|
cswmReplConfigEntry OBJECT-TYPE
|
|
SYNTAX CswmReplConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row of cswmReplConfigTable, containing multicast
|
|
flow replication information."
|
|
INDEX { cswmReplConfigAddrType }
|
|
::= { cswmReplConfigTable 1 }
|
|
|
|
CswmReplConfigEntry ::= SEQUENCE {
|
|
cswmReplConfigAddrType InetAddressType,
|
|
cswmReplConfigCurMode INTEGER,
|
|
cswmReplConfigAutoDetect INTEGER
|
|
}
|
|
|
|
cswmReplConfigAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Internet address type supporting multicast flow
|
|
replication."
|
|
::= { cswmReplConfigEntry 1 }
|
|
|
|
cswmReplConfigCurMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notCapable(1), -- read-only
|
|
ingress(2),
|
|
egressAndIngress(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the current mode of multicast flow replication
|
|
for this address type.
|
|
|
|
'notCapable' - This device is not capable of Multicast
|
|
flow replication for this address type.
|
|
|
|
'ingress' - The current mode of replication is
|
|
ingress.
|
|
|
|
'egressAndIngress' - The current mode of replication is
|
|
egress and ingress.
|
|
|
|
When the value of this object is 'notCapable' the object
|
|
value is not writable.
|
|
The value 'notCapable' can not be set.
|
|
|
|
The values of cswmReplCapability for the modules on the system
|
|
should be considered when setting the value for this object.
|
|
Certain systems may not be fully operational in a particular
|
|
replication mode if there is an inconsistency between
|
|
this object and the values of cswmReplCapability."
|
|
::= { cswmReplConfigEntry 2 }
|
|
|
|
cswmReplConfigAutoDetect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notCapable(1), -- read-only
|
|
enable(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the auto-detection of multicast replication
|
|
mode for this address type.
|
|
|
|
'notCapable' - This device is not capable of Auto-detection
|
|
of multicast replication mode for this
|
|
address type.
|
|
|
|
'enable' - The auto-detection of multicast replication
|
|
mode is enabled.
|
|
|
|
'disable' - The auto-detection of multicast replication
|
|
mode is disabled.
|
|
|
|
When the value of this object is 'notCapable' the object
|
|
value is not writable.
|
|
The value 'notCapable' can not be set."
|
|
::= { cswmReplConfigEntry 3 }
|
|
|
|
cswmGlobalReplcationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notCapable(1), -- read-only
|
|
ingress(2),
|
|
egress(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the current mode of multicast flow replication
|
|
for all Internet address types supporting multicast flow
|
|
replication.
|
|
|
|
'notCapable' - This device is not capable of Multicast flow
|
|
replication.
|
|
|
|
'ingress' - The current mode of replication is ingress.
|
|
|
|
'egress' - The current mode of replication is egress.
|
|
|
|
When the value of this object is 'notCapable' the object
|
|
value is not writable.
|
|
The value 'notCapable' can not be set.
|
|
|
|
The values of cswmReplCapability for the modules on the system
|
|
should be considered when setting the value for this object.
|
|
Certain systems may not be fully operational in a particular
|
|
replication mode if there is an inconsistency between
|
|
this object and the values of cswmReplCapability."
|
|
::= { cswmReplication 3}
|
|
|
|
--
|
|
-- The MVRF statistics table
|
|
--
|
|
cswmMvrfStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CswmMvrfStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing multicast flow statistics information on
|
|
each Multicast VPN routing/forwarding instance (MVRF)."
|
|
::= { cswmMvrfStats 1 }
|
|
|
|
cswmMvrfStatsEntry OBJECT-TYPE
|
|
SYNTAX CswmMvrfStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row of cswmMvrfStatsTable, containing
|
|
multicast flow statistics for each MVRF."
|
|
INDEX { cswmMvrfName }
|
|
::= { cswmMvrfStatsTable 1 }
|
|
|
|
CswmMvrfStatsEntry ::= SEQUENCE {
|
|
cswmMvrfName MplsVpnId,
|
|
cswmMvrfTotalFlows Gauge32,
|
|
cswmMvrfPartialFlows Gauge32,
|
|
cswmMvrfRpfMfdFlows Gauge32
|
|
}
|
|
|
|
cswmMvrfName OBJECT-TYPE
|
|
SYNTAX MplsVpnId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The human-readable name of this VPN."
|
|
::= { cswmMvrfStatsEntry 1 }
|
|
|
|
cswmMvrfTotalFlows OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the total number of multicast flow entries
|
|
installed for this MVRF."
|
|
::= { cswmMvrfStatsEntry 2 }
|
|
|
|
cswmMvrfPartialFlows OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the total number of multicast partial short cut
|
|
flow entries installed for this MVRF."
|
|
::= { cswmMvrfStatsEntry 3 }
|
|
|
|
cswmMvrfRpfMfdFlows OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the total number of Reverse Path Forwarding(RPF)
|
|
Multicast Fast Drop(MFD) flow entries installed for this
|
|
MVRF."
|
|
::= { cswmMvrfStatsEntry 4 }
|
|
|
|
--
|
|
-- Designated Forwarder Database usage
|
|
--
|
|
cswmBiDirPimDfUsed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Bi-directional PIM Designated Forwarder
|
|
entries currently in use by the default MVRF on the device."
|
|
::= { cswmBiDirPimDfStats 1 }
|
|
|
|
cswmBiDirPimDfTotal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Bi-directional PIM Designated Forwarder
|
|
entries for the default MVRF on the device."
|
|
::= { cswmBiDirPimDfStats 2 }
|
|
|
|
--
|
|
-- The Designated Forwarder Database usage table
|
|
--
|
|
cswmMvrfBiDirPimDfUsageTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CswmMvrfBiDirPimDfUsageEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing multicast Bi-directional PIM
|
|
Designated Forwarder usage information on
|
|
each Multicast VPN routing/forwarding instance (MVRF)
|
|
for every Internet address type supported."
|
|
::= { cswmBiDirPimDfStats 3 }
|
|
|
|
cswmMvrfBiDirPimDfUsageEntry OBJECT-TYPE
|
|
SYNTAX CswmMvrfBiDirPimDfUsageEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row of cswmMvrfBiDirPimDfUsageTable, containing
|
|
multicast Bi-directional PIM Designated Forwarder
|
|
usage information on each MVRF per Internet address type."
|
|
INDEX { cswmMvrfName, cswmMvrfBiDirPimDfAddrType }
|
|
::= { cswmMvrfBiDirPimDfUsageTable 1 }
|
|
|
|
CswmMvrfBiDirPimDfUsageEntry ::= SEQUENCE {
|
|
cswmMvrfBiDirPimDfAddrType InetAddressType,
|
|
cswmMvrfBiDirPimDfUsed Unsigned32,
|
|
cswmMvrfBiDirPimDfTotal Unsigned32
|
|
}
|
|
|
|
cswmMvrfBiDirPimDfAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the internet address type
|
|
for which the multicast Bi-directional PIM Designated
|
|
Forwarder usage information is collected."
|
|
::= { cswmMvrfBiDirPimDfUsageEntry 1 }
|
|
|
|
cswmMvrfBiDirPimDfUsed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Bi-directional PIM Designated Forwarder
|
|
entries currently in use."
|
|
::= { cswmMvrfBiDirPimDfUsageEntry 2 }
|
|
|
|
cswmMvrfBiDirPimDfTotal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Bi-directional PIM Designated Forwarder
|
|
entries."
|
|
::= { cswmMvrfBiDirPimDfUsageEntry 3 }
|
|
|
|
--
|
|
-- Multicast LTL usage
|
|
--
|
|
cswmLtlUsed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of Multicast LTL
|
|
entries currently used by this device."
|
|
::= { cswmLtlStats 1 }
|
|
|
|
cswmLtlTotal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the total number of Multicast
|
|
LTL entries available for this device."
|
|
::= { cswmLtlStats 2 }
|
|
|
|
--
|
|
-- Multicast Forwarding Table
|
|
--
|
|
cswmForwardingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CswmForwardingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing multicast forwarding information."
|
|
::= { cswmForwarding 1 }
|
|
|
|
cswmForwardingEntry OBJECT-TYPE
|
|
SYNTAX CswmForwardingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row of cswmForwardingTable, containing multicast
|
|
forwarding information on a particular interface for every
|
|
Internet address type supported."
|
|
INDEX { cswmInterfaceIndex, cswmForwardingAddrType }
|
|
::= { cswmForwardingTable 1 }
|
|
|
|
CswmForwardingEntry ::= SEQUENCE {
|
|
cswmInterfaceIndex InterfaceIndex,
|
|
cswmForwardingAddrType InetAddressType,
|
|
cswmForwardingEnabled INTEGER
|
|
}
|
|
|
|
cswmInterfaceIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the ifIndex for interface capable of
|
|
performing forwarding."
|
|
::= { cswmForwardingEntry 1 }
|
|
|
|
cswmForwardingAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the internet address type of the
|
|
multicast forwarding."
|
|
::= { cswmForwardingEntry 2 }
|
|
|
|
cswmForwardingEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notCapable(1), -- read-only
|
|
enable(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This object specifies whether multicast forwarding
|
|
is supported on this interface for a particular
|
|
internet address type.
|
|
|
|
'notCapable' - A read-only value which indicates that
|
|
this interface is not capable of multicast
|
|
forwarding for this internet address
|
|
type.
|
|
This value cannot be used in SET operation.
|
|
|
|
'enable' - multicast forwarding is enabled.
|
|
|
|
'disable' - multicast forwarding is disabled.
|
|
|
|
This object is not writable if the value of this object
|
|
is 'notCapable'."
|
|
::= { cswmForwardingEntry 3 }
|
|
|
|
-- Multicast Flow Query
|
|
|
|
cswmFlowMaxQueries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of query entries allowed to be outstanding
|
|
at any time, in the cswmFlowQueryTable. The typical value
|
|
for this object is 5."
|
|
::= { cswmFlowQueryResult 1 }
|
|
|
|
cswmFlowQueryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CswmFlowQueryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control table used to query the switching engine by
|
|
specifying retrieval criteria for IP multicast L3 flows.
|
|
Each row instance in the table represents a query with
|
|
its parameters. The resulting per-flow data if requested
|
|
for each instance of a query in this table is returned
|
|
in the cswmFlowResultTable.
|
|
|
|
A row in this table can be created by setting the corresponding
|
|
instance of cswmFlowQueryStatus to 'createAndGo'.
|
|
A row can be deleted by setting the corresponding instance of
|
|
cswmFlowQueryStatus to 'destroy'.
|
|
|
|
The maximum number of entries (rows) in this table cannot
|
|
exceed the value of cswmFlowMaxQueries object."
|
|
::= { cswmFlowQueryResult 2 }
|
|
|
|
cswmFlowQueryEntry OBJECT-TYPE
|
|
SYNTAX CswmFlowQueryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row of the cswmFlowQueryTable used to
|
|
setup retrieval criteria to search for IP multicast L3
|
|
flows on a switching engine entity in the device."
|
|
INDEX { cswmFlowQueryIndex }
|
|
::= { cswmFlowQueryTable 1 }
|
|
|
|
CswmFlowQueryEntry ::= SEQUENCE {
|
|
cswmFlowQueryIndex Unsigned32,
|
|
cswmFlowQueryMask BITS,
|
|
cswmFlowQueryMvrf MplsVpnId,
|
|
cswmFlowQueryAddrType InetAddressType,
|
|
cswmFlowQuerySource InetAddress,
|
|
cswmFlowQueryGroup InetAddress,
|
|
cswmFlowQueryGroupMask InetAddressPrefixLength,
|
|
cswmFlowQueryType BITS,
|
|
cswmFlowQueryEntityIndex EntPhysicalIndexOrZero,
|
|
cswmFlowQuerySkipNFlows Integer32,
|
|
cswmFlowQueryTotalFlows Integer32,
|
|
cswmFlowMcastQueryRows Integer32,
|
|
cswmFlowMcastQueryMoreRows TruthValue,
|
|
cswmFlowQueryOwner SnmpAdminString,
|
|
cswmFlowQueryCreateTime TimeStamp,
|
|
cswmFlowQueryStorage StorageType,
|
|
cswmFlowQueryStatus RowStatus
|
|
}
|
|
|
|
cswmFlowQueryIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary integer in the range of 1 to
|
|
cswmFlowMaxQueries to identify this control query."
|
|
::= { cswmFlowQueryEntry 1 }
|
|
|
|
cswmFlowQueryMask OBJECT-TYPE
|
|
SYNTAX BITS { vrf(0), group(1), groupmask(2), source(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to set up the query criteria for
|
|
the multicast flows of interest. If any one of the
|
|
defined BITs is set, then the objects(s) corresponding
|
|
to the BITS in the same row instance will be used for
|
|
the search.
|
|
|
|
Specifically, if the 'vrf' BIT is set, then the
|
|
cswmFlowQueryMvrf object will be included in the
|
|
search criteria. The 'vrf' BIT can be set in
|
|
combination with any other BIT for the search.
|
|
|
|
If the 'group' BIT is set, then the
|
|
cswmFlowQueryGroup object will be used as the
|
|
search criteria.
|
|
|
|
If the 'groupmask' BIT is set, then the
|
|
cswmFlowQueryGroup and cswmFlowQueryGroupMask objects
|
|
will be used as the search criteria.
|
|
|
|
If the 'source' BIT is set, then the
|
|
cswmFlowQuerySource and cswmFlowQueryGroup objects
|
|
will be used as the search criteria.
|
|
|
|
It is SNMP managers' responsibility to turn on certain
|
|
bits on in this object instance, if necessary,
|
|
and the corresponding flow parameter variables to the
|
|
appropriate values in order to setup the desired
|
|
query criteria."
|
|
DEFVAL { {} }
|
|
::= { cswmFlowQueryEntry 2 }
|
|
|
|
cswmFlowQueryMvrf OBJECT-TYPE
|
|
SYNTAX MplsVpnId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The human-readable name of the Multicast
|
|
Virtual Private Network (MVPN) routing/forwarding
|
|
instance (MVRF). When the 'mvrf' bit of
|
|
cswmFlowQueryMask object in the same row is on,
|
|
an appropriate value should be specified and only flows
|
|
with the specified MVRF name will be contained in the
|
|
result table. If the 'mvrf' bit in the associated
|
|
cswmFlowQueryMask is cleared, this object is ignored
|
|
during the query, and all the flows corresponding to the
|
|
default MVRF will be considered."
|
|
::= { cswmFlowQueryEntry 3 }
|
|
|
|
cswmFlowQueryAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Internet address type for this multicast search
|
|
query."
|
|
DEFVAL { ipv4 }
|
|
::= { cswmFlowQueryEntry 4 }
|
|
|
|
cswmFlowQuerySource OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source Internet address of the IP multicast layer 3
|
|
flows. When the 'source' BIT of cswmFlowQueryMask
|
|
object in the same row is on,
|
|
an appropriate value should be specified and only flows
|
|
with the specified source address will be contained in the
|
|
result table. If the 'source' bit in the associated
|
|
cswmFlowQueryMask is off, this object is ignored
|
|
during the query.
|
|
|
|
The type of this address is determined by the value of the
|
|
cswmFlowQueryAddrType object.
|
|
|
|
The default value of this object is all zeros."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { cswmFlowQueryEntry 5 }
|
|
|
|
cswmFlowQueryGroup OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast group Internet address of the queried flows.
|
|
When the 'group' or 'groupmask' bit of cswmFlowQueryMask
|
|
object in the same row is on, an appropriate value should be
|
|
specified and only flows with the specified group address
|
|
will be contained in the result table. If the 'group'
|
|
and 'groupmask' bits in the associated cswmFlowQueryMask
|
|
are both off, this object is ignored during the query.
|
|
|
|
The type of this address is determined by the value of the
|
|
cswmFlowQueryAddrType object.
|
|
|
|
The default value of this object is all zeros."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { cswmFlowQueryEntry 6 }
|
|
|
|
cswmFlowQueryGroupMask OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the Prefix associated with cswmFlowQueryGroup.
|
|
When the 'groupmask' bit of cswmFlowQueryMask object in the
|
|
same row is on, an appropriate value should be specified and
|
|
only rows with the specied group address prefix will be
|
|
returned in the result table. If the 'groupmask' bit in the
|
|
associated cswmFlowQueryMask is off, this object is ignored
|
|
during the query.
|
|
|
|
A value of zero causes all addresses to match.
|
|
This prefix length will be consistent with the type specified in
|
|
cswmFlowQueryAddrType."
|
|
DEFVAL { 0 } -- by default, any group address
|
|
::= { cswmFlowQueryEntry 7 }
|
|
|
|
cswmFlowQueryType OBJECT-TYPE
|
|
SYNTAX BITS { perFlow(0), oifList(1), dfList(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to set up the query type for
|
|
the multicast flows of interest.
|
|
|
|
If the 'perFlow' BIT is set, then, the entries
|
|
matching this query will be returned in
|
|
in cswmFlowResultTable.
|
|
If the 'perFlow' BIT is not set, then only
|
|
the total number of flows matching this query
|
|
are computed and returned in cswmFlowQueryTotalFlows,
|
|
and there will be no entries matching this query in
|
|
cswmFlowResultTable.
|
|
|
|
If the 'oifList' BIT is set, then the Outgoing Interface
|
|
(OIF) list is generated for each flow and populated
|
|
in cswmFlowResultTable.
|
|
|
|
If the 'dfList' BIT is set, then the Designated Forwarder
|
|
(DF) interfaces list is generated for each flow and populated
|
|
in cswmFlowResultTable."
|
|
::= { cswmFlowQueryEntry 8 }
|
|
|
|
cswmFlowQueryEntityIndex OBJECT-TYPE
|
|
SYNTAX EntPhysicalIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the switching engine for which the
|
|
query is issued.
|
|
|
|
When the value of this object is 0, the query is performed
|
|
on the switching engine of the active supervisor."
|
|
DEFVAL { 0 }
|
|
::= { cswmFlowQueryEntry 9 }
|
|
|
|
cswmFlowQuerySkipNFlows OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of searched flows to be skipped before storing
|
|
any multicast flows in cswmFlowResultTable, when the
|
|
'perFlow' bit is set in cswmFlowQueryType.
|
|
|
|
This object can be used along with cswmFlowMcastQueryMoreRows
|
|
object to skip previously found flows and only query the
|
|
remaining flows in the table.
|
|
|
|
Note that due to the dynamical nature of the L3 flows, the
|
|
queried flows may be missed or repeated by setting this object."
|
|
DEFVAL { 0 }
|
|
::= { cswmFlowQueryEntry 10 }
|
|
|
|
cswmFlowQueryTotalFlows OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of flows matching the query criteria.
|
|
|
|
The value of this object will be zero when the 'perFlow'
|
|
bit is set in cswmFlowQueryType."
|
|
::= { cswmFlowQueryEntry 11 }
|
|
|
|
cswmFlowMcastQueryRows OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicating the status of the query by following values:
|
|
-1 - Either the query has not been started or the
|
|
agent is still processing this query instance.
|
|
It is the default value when the row is instantiated.
|
|
|
|
0..2147483647 - The search has ended and this is the
|
|
number of rows in the cswmFlowResultTable,
|
|
resulting from this query."
|
|
::= { cswmFlowQueryEntry 12 }
|
|
|
|
cswmFlowMcastQueryMoreRows OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the value of the object is true when there are more
|
|
entries available matching this query criteria,
|
|
than the ones returned in cswmFlowResultTable."
|
|
::= { cswmFlowQueryEntry 13 }
|
|
|
|
cswmFlowQueryOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The manager entity that configured this entry and is therefore
|
|
using the resources assigned to it. It is used to model an
|
|
administratively assigned name of the owner of a resource.
|
|
It is recommended that this object have one or more the following
|
|
information: IP address, management station name, network
|
|
manager's name, location, or phone number."
|
|
::= { cswmFlowQueryEntry 14 }
|
|
|
|
cswmFlowQueryCreateTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time when this query was created."
|
|
::= { cswmFlowQueryEntry 15 }
|
|
|
|
cswmFlowQueryStorage OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row."
|
|
DEFVAL { volatile }
|
|
::= { cswmFlowQueryEntry 16 }
|
|
|
|
cswmFlowQueryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status object used to manage rows in this table.
|
|
When set to 'active', the query to search for l3 multicast
|
|
flows is initiated. Once a row becomes active, values
|
|
within the row cannot be modified, except by deleting
|
|
and re-creating the row."
|
|
::= { cswmFlowQueryEntry 17 }
|
|
|
|
|
|
-- Multicast Flow Query Result
|
|
|
|
cswmFlowResultTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CswmFlowResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing current IP multicast flow information
|
|
corresponding to all the completed queries set up in
|
|
the cswmFlowQueryTable, that were initiated on the switch
|
|
engine(s) with the 'perFlow' bit set in cswmFlowQueryType.
|
|
The query result will not become available until
|
|
the current search completes."
|
|
::= { cswmFlowQueryResult 3 }
|
|
|
|
cswmFlowResultEntry OBJECT-TYPE
|
|
SYNTAX CswmFlowResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row of cswmFlowResultTable, containing
|
|
information about an IP multicast layer 3 flow that matchs
|
|
the search criteria set in the corresponding row of
|
|
cswmFlowQueryTable. This row instance is indexed by
|
|
the query index (cswmFlowQueryIndex), and data entry index
|
|
(cswmFlowResultIndex)."
|
|
INDEX { cswmFlowQueryIndex, cswmFlowResultIndex }
|
|
::= { cswmFlowResultTable 1 }
|
|
|
|
CswmFlowResultEntry ::= SEQUENCE {
|
|
cswmFlowResultIndex Unsigned32,
|
|
cswmFlowResultMvrf MplsVpnId,
|
|
cswmFlowResultAddrType InetAddressType,
|
|
cswmFlowResultGroup InetAddress,
|
|
cswmFlowResultGroupMask InetAddressPrefixLength,
|
|
cswmFlowResultSource InetAddress,
|
|
cswmFlowResultFlags BITS,
|
|
cswmFlowResultRpfInterface InterfaceIndexOrZero,
|
|
cswmFlowResultPackets Counter64,
|
|
cswmFlowResultOctets Counter64
|
|
}
|
|
|
|
cswmFlowResultIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A positive integer which uniquely identify a result entry
|
|
matching a particular query."
|
|
::= { cswmFlowResultEntry 1 }
|
|
|
|
cswmFlowResultMvrf OBJECT-TYPE
|
|
SYNTAX MplsVpnId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MVRF to which this flow belongs to."
|
|
::= { cswmFlowResultEntry 2 }
|
|
|
|
cswmFlowResultAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Internet address type of cswmFlowResultGroup,
|
|
cswmFlowResultGroupMask and cswmFlowResultSource."
|
|
::= { cswmFlowResultEntry 3 }
|
|
|
|
cswmFlowResultGroup OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of the multicast layer 3 flow."
|
|
::= { cswmFlowResultEntry 4 }
|
|
|
|
cswmFlowResultGroupMask OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the Prefix associated with cswmFlowResultGroup.
|
|
A value of zero causes all addresses to match. This prefix
|
|
length will be consistent with the type specified in
|
|
cswmFlowResultAddrType."
|
|
::= { cswmFlowResultEntry 5 }
|
|
|
|
cswmFlowResultSource OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address of the multicast layer 3 flow."
|
|
::= { cswmFlowResultEntry 6 }
|
|
|
|
cswmFlowResultFlags OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
copy(0),
|
|
punt(1),
|
|
ineligible(2),
|
|
hwFail(3),
|
|
bidir(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the corresponding flags for this flow:
|
|
|
|
'copy' - indicates that traffic is copied to CPU and
|
|
forwarded in hardware.
|
|
|
|
'punt' - indicates that traffic is punted to CPU and
|
|
forwarded in software.
|
|
|
|
'ineligible' - indicates that this flow is ineligible for
|
|
hardware installation.
|
|
|
|
'hwFail' - indicates that this flow failed to install
|
|
in hardware.
|
|
|
|
'bidir' - indicates that this flow is a Bidir flow."
|
|
::= { cswmFlowResultEntry 7 }
|
|
|
|
cswmFlowResultRpfInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents either the InterfaceIndex of RPF
|
|
interface for a RPF flow or 0 (zero). The value of zero means
|
|
that this flow is a non-RPF flow."
|
|
::= { cswmFlowResultEntry 8 }
|
|
|
|
cswmFlowResultPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of multicast traffic packets forwarded
|
|
for this flow."
|
|
::= { cswmFlowResultEntry 11 }
|
|
|
|
cswmFlowResultOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of multicast traffic octets forwarded
|
|
for this flow."
|
|
::= { cswmFlowResultEntry 12 }
|
|
|
|
-- OIF List
|
|
|
|
cswmFlowResultOIFTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CswmFlowResultOIFEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing list of OIF
|
|
for a flow listed in cswmFlowResultTable."
|
|
::= { cswmFlowQueryResult 4 }
|
|
|
|
cswmFlowResultOIFEntry OBJECT-TYPE
|
|
SYNTAX CswmFlowResultOIFEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row of cswmFlowResultOIFTable, containing
|
|
information about the list of OIF for a flow
|
|
listed in cswmFlowResultTable. An entry is created
|
|
only when the 'oifList' bit is set in cswmFlowQueryType."
|
|
INDEX { cswmFlowQueryIndex, cswmFlowResultIndex,
|
|
cswmFlowResultOIFIndex }
|
|
::= { cswmFlowResultOIFTable 1 }
|
|
|
|
CswmFlowResultOIFEntry ::= SEQUENCE {
|
|
cswmFlowResultOIFIndex Unsigned32,
|
|
cswmFlowResultOIFIntList CiscoInterfaceIndexList
|
|
}
|
|
|
|
cswmFlowResultOIFIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A positive integer which uniquely identifies a list of OIF
|
|
for a particular result flow matching a particular query."
|
|
::= { cswmFlowResultOIFEntry 1 }
|
|
|
|
cswmFlowResultOIFIntList OBJECT-TYPE
|
|
SYNTAX CiscoInterfaceIndexList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object lists the ifIndex for a set of 64 OIF for a
|
|
particular flow."
|
|
::= { cswmFlowResultOIFEntry 2 }
|
|
|
|
-- DF Interfaces List
|
|
|
|
cswmFlowResultDFTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CswmFlowResultDFEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing list of DF interfaces for a flow
|
|
listed in cswmFlowResultTable."
|
|
::= { cswmFlowQueryResult 5 }
|
|
|
|
cswmFlowResultDFEntry OBJECT-TYPE
|
|
SYNTAX CswmFlowResultDFEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row of cswmFlowResultDFTable, containing
|
|
information about the list of DF Interfaces for a flow
|
|
listed in cswmFlowResultTable. An entry is created
|
|
only when the 'dfList' bit is set in cswmFlowQueryType."
|
|
INDEX { cswmFlowQueryIndex, cswmFlowResultIndex,
|
|
cswmFlowResultDFIndex }
|
|
::= { cswmFlowResultDFTable 1 }
|
|
|
|
CswmFlowResultDFEntry ::= SEQUENCE {
|
|
cswmFlowResultDFIndex Unsigned32,
|
|
cswmFlowResultDFIntList CiscoInterfaceIndexList
|
|
}
|
|
|
|
cswmFlowResultDFIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A positive integer which uniquely identifies a list of DF
|
|
interfaces for a particular flow matching a particular query."
|
|
::= { cswmFlowResultDFEntry 1 }
|
|
|
|
cswmFlowResultDFIntList OBJECT-TYPE
|
|
SYNTAX CiscoInterfaceIndexList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object lists the ifIndex for a set of 64 DF interfaces
|
|
for a particular flow."
|
|
::= { cswmFlowResultDFEntry 2 }
|
|
|
|
-- No Notification defined
|
|
|
|
-- Conformance
|
|
|
|
cswmMIBCompliances OBJECT IDENTIFIER ::= { cswmMIBConform 1 }
|
|
cswmMIBGroups OBJECT IDENTIFIER ::= { cswmMIBConform 2 }
|
|
|
|
|
|
cswmMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the
|
|
CISCO-SWITCH-MULTICAST-MIB.
|
|
|
|
OBJECT cswmReplConfigAddrType
|
|
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
and IPv6 addresses."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { cswmGlobalGroup }
|
|
|
|
GROUP cswmConsistCheckGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where multicast consistency
|
|
check is supported."
|
|
|
|
GROUP cswmReplicationGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where multicast flow
|
|
replication is supported."
|
|
|
|
GROUP cswmMvrfStatsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where MVRF
|
|
statistics are supported."
|
|
|
|
::= { cswmMIBCompliances 1 }
|
|
|
|
cswmMIBCompliance2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the
|
|
CISCO-SWITCH-MULTICAST-MIB.
|
|
|
|
OBJECT cswmReplConfigAddrType
|
|
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
and IPv6 addresses."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { cswmGlobalGroup }
|
|
|
|
GROUP cswmConsistCheckGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where multicast consistency
|
|
check is supported."
|
|
|
|
GROUP cswmReplicationGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where multicast flow
|
|
replication is supported."
|
|
|
|
GROUP cswmMvrfStatsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where MVRF
|
|
statistics are supported."
|
|
|
|
GROUP cswmBiDirPimDfUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where Bi-directional
|
|
PIM Designated Forwarder database is supported."
|
|
|
|
GROUP cswmLtlUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where Multicast
|
|
LTL usage information is available."
|
|
|
|
::= { cswmMIBCompliances 2 }
|
|
|
|
cswmMIBCompliance3 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the
|
|
CISCO-SWITCH-MULTICAST-MIB.
|
|
|
|
OBJECT cswmReplConfigAddrType
|
|
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
and IPv6 addresses."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { cswmGlobalGroup }
|
|
|
|
GROUP cswmConsistCheckGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where multicast consistency
|
|
check is supported."
|
|
|
|
GROUP cswmReplicationGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where multicast flow
|
|
replication is supported."
|
|
|
|
GROUP cswmMvrfStatsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where MVRF
|
|
statistics are supported."
|
|
|
|
GROUP cswmBiDirPimDfUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where Bi-directional
|
|
PIM Designated Forwarder database is supported."
|
|
|
|
GROUP cswmLtlUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where Multicast
|
|
LTL usage information is available."
|
|
|
|
GROUP cswmGlobalReplicationGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where Multicast
|
|
global flow replication is supported."
|
|
|
|
GROUP cswmMvrfBiDirPimDfUsageGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where Bi-directional
|
|
PIM Designated Forwarder database Per MVRF
|
|
is supported."
|
|
|
|
GROUP cswmForwardingGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where Multicast
|
|
forwarding information is available."
|
|
|
|
GROUP cswmFlowQueryResultGroup
|
|
DESCRIPTION
|
|
"This group is mandatory where Multicast
|
|
l3 flows can be queried."
|
|
|
|
OBJECT cswmMRouteConsistCheck
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmProcessorConsistCheck
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmReplConfigCurMode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmReplConfigAutoDetect
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmGlobalReplcationMode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmForwardingEnabled
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQueryMask
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQueryMvrf
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQueryAddrType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQuerySource
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQueryGroup
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQueryGroupMask
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQueryType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQueryEntityIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQuerySkipNFlows
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQueryOwner
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQueryStorage
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT cswmFlowQueryStatus
|
|
SYNTAX INTEGER { active(1) }
|
|
WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
::= { cswmMIBCompliances 3 }
|
|
|
|
|
|
-- Units of Conformance
|
|
|
|
cswmGlobalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cswmMvpnHwSwitchingStatus,
|
|
cswmVrfLiteStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing global multicast
|
|
information and configuration."
|
|
::= { cswmMIBGroups 1 }
|
|
|
|
cswmConsistCheckGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cswmMRouteConsistCheck,
|
|
cswmProcessorConsistCheck
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing multicast consitency
|
|
check information and configuration."
|
|
::= { cswmMIBGroups 2 }
|
|
|
|
cswmReplicationGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cswmReplCapability,
|
|
cswmReplConfigCurMode,
|
|
cswmReplConfigAutoDetect
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing multicast
|
|
replication information and configuration."
|
|
::= { cswmMIBGroups 3 }
|
|
|
|
cswmMvrfStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cswmMvrfTotalFlows,
|
|
cswmMvrfPartialFlows,
|
|
cswmMvrfRpfMfdFlows
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing MVRF
|
|
statistics."
|
|
::= { cswmMIBGroups 4 }
|
|
|
|
cswmBiDirPimDfUsageGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cswmBiDirPimDfUsed,
|
|
cswmBiDirPimDfTotal
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing Bi-directional
|
|
PIM Designated Forwarder database Usage information."
|
|
::= { cswmMIBGroups 5 }
|
|
|
|
cswmLtlUsageGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cswmLtlUsed,
|
|
cswmLtlTotal
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing Multicast LTL
|
|
usage information."
|
|
::= { cswmMIBGroups 6 }
|
|
|
|
cswmGlobalReplicationGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cswmGlobalReplcationMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing multicast
|
|
global replication information and configuration."
|
|
::= { cswmMIBGroups 7 }
|
|
|
|
cswmMvrfBiDirPimDfUsageGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cswmMvrfBiDirPimDfUsed,
|
|
cswmMvrfBiDirPimDfTotal
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing Bi-directional
|
|
PIM Designated Forwarder database Usage information
|
|
for each MVRF available on the device."
|
|
::= { cswmMIBGroups 8 }
|
|
|
|
cswmForwardingGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cswmForwardingEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing multicast
|
|
forwarding information and configuration."
|
|
::= { cswmMIBGroups 9 }
|
|
|
|
cswmFlowQueryResultGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cswmFlowMaxQueries,
|
|
cswmFlowQueryMask,
|
|
cswmFlowQueryAddrType,
|
|
cswmFlowQuerySource,
|
|
cswmFlowQueryGroup,
|
|
cswmFlowQueryGroupMask,
|
|
cswmFlowQueryType,
|
|
cswmFlowQueryMvrf,
|
|
cswmFlowQueryEntityIndex,
|
|
cswmFlowQuerySkipNFlows,
|
|
cswmFlowQueryTotalFlows,
|
|
cswmFlowMcastQueryRows,
|
|
cswmFlowMcastQueryMoreRows,
|
|
cswmFlowQueryOwner,
|
|
cswmFlowQueryCreateTime,
|
|
cswmFlowQueryStorage,
|
|
cswmFlowQueryStatus,
|
|
cswmFlowResultMvrf,
|
|
cswmFlowResultAddrType,
|
|
cswmFlowResultGroup,
|
|
cswmFlowResultGroupMask,
|
|
cswmFlowResultSource,
|
|
cswmFlowResultFlags,
|
|
cswmFlowResultPackets,
|
|
cswmFlowResultOctets,
|
|
cswmFlowResultRpfInterface,
|
|
cswmFlowResultOIFIntList,
|
|
cswmFlowResultDFIntList
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for querying l3 multicast
|
|
flows."
|
|
::= { cswmMIBGroups 10 }
|
|
END
|
|
|