1292 lines
45 KiB
Plaintext
1292 lines
45 KiB
Plaintext
-- *******************************************************************
|
|
-- CISCO-LWAPP-HA-MIB.my :
|
|
-- Jan 2012, Gayathri
|
|
-- Nov 2017, Selvaraj Mani (Added to IOS Sources)
|
|
-- Copyright (c) 2018-2020 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *******************************************************************
|
|
|
|
CISCO-LWAPP-HA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Integer32
|
|
FROM SNMPv2-SMI
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP,
|
|
MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
Counter32
|
|
FROM SNMPv2-SMI
|
|
TruthValue,
|
|
MacAddress,
|
|
DisplayString,
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
InetAddressType,
|
|
InetAddress
|
|
FROM INET-ADDRESS-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
sysName
|
|
FROM RFC1213-MIB
|
|
cRFStatusPeerUnitState,
|
|
cRFStatusUnitState
|
|
FROM CISCO-RF-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * MODULE IDENTITY
|
|
-- ********************************************************************
|
|
|
|
ciscoLwappHaMIB MODULE-IDENTITY
|
|
LAST-UPDATED "202006070000Z"
|
|
ORGANIZATION "Cisco Systems Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems,
|
|
Customer Service
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
|
|
Email: cs-wnbu-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB is intended to be implemented on all those
|
|
devices operating as Central controllers, that
|
|
terminate the Light Weight Access Point Protocol
|
|
tunnel from Cisco Light-weight LWAPP Access Points.
|
|
|
|
This MIB is used to show and configure High
|
|
availability (HA) related statistics.
|
|
|
|
The relationship between CC and the LWAPP APs
|
|
can be depicted as follows:
|
|
|
|
+......+ +......+ +......+
|
|
+ + + + + +
|
|
+ CC + + CC + + CC +
|
|
+ + + + + +
|
|
+......+ +......+ +......+
|
|
.. . .
|
|
.. . .
|
|
. . . .
|
|
. . . .
|
|
. . . .
|
|
. . . .
|
|
+......+ +......+ +......+ +......+
|
|
+ + + + + + + +
|
|
+ AP + + AP + + AP + + AP +
|
|
+ + + + + + + +
|
|
+......+ +......+ +......+ +......+
|
|
. . .
|
|
. . . .
|
|
. . . .
|
|
. . . .
|
|
. . . .
|
|
+......+ +......+ +......+ +......+
|
|
+ + + + + + + +
|
|
+ MN + + MN + + MN + + MN +
|
|
+ + + + + + + +
|
|
+......+ +......+ +......+ +......+
|
|
|
|
|
|
The LWAPP tunnel exists between the controller and
|
|
the APs. The MNs communicate with the APs through
|
|
the protocol defined by the 802.11 standard.
|
|
|
|
LWAPP APs, upon bootup, discover and join one of the
|
|
controllers and the controller pushes the configuration,
|
|
that includes the WLAN parameters, to the LWAPP APs.
|
|
The APs then encapsulate all the 802.11 frames from
|
|
wireless clients inside LWAPP frames and forward
|
|
the LWAPP frames to the controller.
|
|
|
|
GLOSSARY
|
|
|
|
Access Point ( AP )
|
|
|
|
An entity that contains an 802.11 medium access
|
|
control ( MAC ) and physical layer ( PHY ) interface
|
|
and provides access to the distribution services via
|
|
the wireless medium for associated clients.
|
|
|
|
LWAPP APs encapsulate all the 802.11 frames in
|
|
LWAPP frames and sends them to the controller to which
|
|
it is logically connected.
|
|
|
|
Central Controller ( CC )
|
|
|
|
The central entity that terminates the LWAPP protocol
|
|
tunnel from the LWAPP APs. Throughout this MIB,
|
|
this entity also referred to as 'controller'.
|
|
|
|
Light Weight Access Point Protocol ( LWAPP )
|
|
|
|
This is a generic protocol that defines the
|
|
communication between the Access Points and the
|
|
Central Controller.
|
|
|
|
Mobile Node ( MN )
|
|
|
|
A roaming 802.11 wireless device in a wireless
|
|
network associated with an access point. Mobile Node,
|
|
Mobile Station(Ms) and client are used interchangeably.
|
|
|
|
REFERENCE
|
|
|
|
[1] Wireless LAN Medium Access Control ( MAC ) and
|
|
Physical Layer ( PHY ) Specifications.
|
|
|
|
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
|
|
Weight Access Point Protocol."
|
|
REVISION "202006070000Z"
|
|
DESCRIPTION "Added Gateway Failover Interval object in
|
|
(ciscoLwappMcRmiConfig)"
|
|
REVISION "201907080000Z"
|
|
DESCRIPTION "Added Multi-Chassis RMI configuration objects in
|
|
(ciscoLwappMcRmiConfig)"
|
|
REVISION "201711080000Z"
|
|
DESCRIPTION "Added Multi-Chassis HA configuration objects in
|
|
(ciscoLwappMcHaConfig)"
|
|
REVISION "201703140000Z"
|
|
DESCRIPTION "Initial version of this MIB module."
|
|
::= { ciscoMgmt 843 }
|
|
|
|
|
|
ciscoLwappHaMIBNotifs OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIB 0 }
|
|
|
|
ciscoLwappHaMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIB 1 }
|
|
|
|
ciscoLwappHaMIBConform OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIB 2 }
|
|
|
|
ciscoLwappHaGlobalConfig OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIBObjects 1 }
|
|
|
|
ciscoLwappHaNetworkConfig OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIBObjects 2 }
|
|
|
|
ciscoLwappHaNotificationVariable OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIBObjects 3 }
|
|
|
|
ciscoLwappHaPeerStatisticsVariable OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIBObjects 4 }
|
|
|
|
ciscoLwappHaStatisticsVariable OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIBObjects 5 }
|
|
|
|
ciscoLwappMcHaConfig OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIBObjects 6 }
|
|
|
|
ciscoLwappMcRmiConfig OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIBObjects 7 }
|
|
|
|
ciscoLwappHaSystemStatistics OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaPeerStatisticsVariable 1 }
|
|
|
|
ciscoLwappHaCpuStatistics OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaSystemStatistics 1 }
|
|
|
|
ciscoLwappHaPowerSupplyStatistics OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaSystemStatistics 2 }
|
|
|
|
ciscoLwappHaMemoryStatistics OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaSystemStatistics 3 }
|
|
|
|
|
|
-- *************************************************
|
|
-- HA Global Config
|
|
-- *************************************************
|
|
|
|
cLHaApSsoConfig OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the value of redundancy mode
|
|
statefull switch over (SSO).
|
|
A value of 'true' indicates that, redundancy mode SSO
|
|
is enabled.
|
|
A value of 'false' indicates that, redundancy mode SSO
|
|
is disabled."
|
|
DEFVAL { false }
|
|
::= { ciscoLwappHaGlobalConfig 1 }
|
|
|
|
cLHaPeerIpAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the peer WLC IP address
|
|
type."
|
|
::= { ciscoLwappHaGlobalConfig 2 }
|
|
|
|
cLHaPeerIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the peer WLC IP address."
|
|
::= { ciscoLwappHaGlobalConfig 3 }
|
|
|
|
cLHaServicePortPeerIpAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the peer WLC service port IP
|
|
address type."
|
|
::= { ciscoLwappHaGlobalConfig 4 }
|
|
|
|
cLHaServicePortPeerIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the peer WLC service port IP
|
|
address."
|
|
::= { ciscoLwappHaGlobalConfig 5 }
|
|
|
|
cLHaServicePortPeerIpNetMaskType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the peer WLC service port net
|
|
mask IP type."
|
|
::= { ciscoLwappHaGlobalConfig 6 }
|
|
|
|
cLHaServicePortPeerIpNetMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the peer WLC service port
|
|
net mask IP address."
|
|
::= { ciscoLwappHaGlobalConfig 7 }
|
|
|
|
cLHaRedundancyIpAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the peer WLC redundancy management
|
|
interface IP address type."
|
|
::= { ciscoLwappHaGlobalConfig 8 }
|
|
|
|
cLHaRedundancyIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the peer WLC redundancy management
|
|
interface IP address."
|
|
::= { ciscoLwappHaGlobalConfig 9 }
|
|
|
|
cLHaPeerMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the peer WLC mac
|
|
address."
|
|
::= { ciscoLwappHaGlobalConfig 10 }
|
|
|
|
cLHaVirtualMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the peer WLC mobility
|
|
MAC address."
|
|
::= { ciscoLwappHaGlobalConfig 11 }
|
|
|
|
cLHaPrimaryUnit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether this is the primary
|
|
or secondary unit.
|
|
A value of 'true' indicates that, this unit is the
|
|
primary unit.
|
|
A value of 'false' indicates that, this unit is the
|
|
secondary unit."
|
|
DEFVAL { false }
|
|
::= { ciscoLwappHaGlobalConfig 12 }
|
|
|
|
cLHaLinkEncryption OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether link encryption is
|
|
enabled or disabled.
|
|
A value of 'true' indicates that, link encryption
|
|
is enabled.
|
|
A value of 'false' indicates that, link encryption
|
|
is disabled."
|
|
DEFVAL { false }
|
|
::= { ciscoLwappHaGlobalConfig 13 }
|
|
|
|
cLHaNetworkFailOver OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether network failover is
|
|
enabled or disabled.
|
|
A value of 'true' indicates that, network failover
|
|
is enabled.
|
|
A value of 'false' indicates that, network failover
|
|
is disabled."
|
|
DEFVAL { false }
|
|
::= { ciscoLwappHaGlobalConfig 14 }
|
|
|
|
cLHaRFStatusUnitIp OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the peer IP address
|
|
when Redundancy Framwork(RF) state of active/peer
|
|
unit changes."
|
|
::= { ciscoLwappHaGlobalConfig 15 }
|
|
|
|
cLHaKATimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies keep alive timeout value in milli
|
|
seconds between 100 and 1000. The value for this object
|
|
configured in multiples of 50."
|
|
DEFVAL { 100 }
|
|
::= { ciscoLwappHaGlobalConfig 16 }
|
|
|
|
cLHaKARetryCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (3..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies keep alive retry count and
|
|
The value for this object configured between 3 and
|
|
10."
|
|
DEFVAL { 3 }
|
|
::= { ciscoLwappHaGlobalConfig 17 }
|
|
|
|
cLHaGwRetryCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (6..12)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies default gateway reachability retry
|
|
count and The value for this object configured between 6
|
|
and 12."
|
|
DEFVAL { 12 }
|
|
::= { ciscoLwappHaGlobalConfig 18 }
|
|
|
|
cLHaPeerSearchTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (60..300)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies peer search timeout and
|
|
The value for this object configured between 60
|
|
and 300 seconds."
|
|
DEFVAL { 200 }
|
|
::= { ciscoLwappHaGlobalConfig 19 }
|
|
|
|
cLHaRFStatusUnitIpType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the peer IP address type
|
|
when redundancy framwork(RF) state of active/peer unit
|
|
changes."
|
|
::= { ciscoLwappHaGlobalConfig 20 }
|
|
|
|
-- ********************************************************************
|
|
-- ciscoLwappMcHaConfig
|
|
-- ********************************************************************
|
|
|
|
cLMcHaPortName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object allows user to specify and get the
|
|
interface name designated as the HA Interface
|
|
in Multi-Chassis HA environments. This will be
|
|
applicable only on the virtual Chassis systems.
|
|
This should be the complete namestring of
|
|
the chassis interface."
|
|
::= { ciscoLwappMcHaConfig 1 }
|
|
|
|
cLMcHaPortLocIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object represents the IP version to be
|
|
used for HA transport. This object will apply
|
|
to both local IP and the cLMcHaPortMask"
|
|
::= { ciscoLwappMcHaConfig 2 }
|
|
|
|
|
|
cLMcHaPortLocIp OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object allows user to specify and get the
|
|
Local chassis IPv4 Address to establish the HA
|
|
communication. This IP Address will be assigned
|
|
to the HA Port on the configuring chassis, and
|
|
it will be take effect only after a reload."
|
|
::= { ciscoLwappMcHaConfig 3 }
|
|
|
|
cLMcHaPortMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object allows user to specify and get the
|
|
network mask for the local chassis IPv4 Address
|
|
to establish the HA communication. This netmask
|
|
will be assigned to designated HA interface."
|
|
::= { ciscoLwappMcHaConfig 4 }
|
|
|
|
cLMcHaPortRemoteIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object represents the IP version to be
|
|
used for HA transport."
|
|
::= { ciscoLwappMcHaConfig 5 }
|
|
|
|
cLMcHaPortRemIp OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object allows user to specify and get the
|
|
peer chassis IPv4 Address to establish the
|
|
HA communication."
|
|
::= { ciscoLwappMcHaConfig 6 }
|
|
|
|
cLMcHaKeepAliveTimeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (100..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object specifies keep alive timeout value
|
|
in milli seconds between 100 and 1000.
|
|
The value for this object configured in
|
|
multiples of 100."
|
|
DEFVAL { 100 }
|
|
::= { ciscoLwappMcHaConfig 7 }
|
|
|
|
cLMcHaChassisPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object allows user to specify and get the
|
|
current chassis priority. The higher the
|
|
priority, higher the chance of local chassis
|
|
becoming the Active."
|
|
::= { ciscoLwappMcHaConfig 8 }
|
|
|
|
cLMcHaClearConfig OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object allows user to remove the multi-chassis
|
|
HA configuration. When get, TRUE value indicating
|
|
HA configuration is cleared, FALSE means not."
|
|
DEFVAL { false }
|
|
::= { ciscoLwappMcHaConfig 9 }
|
|
|
|
cLMcHaKeepAliveRetryCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (3..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object specifies keep alive retry count and
|
|
The value for this object configured between
|
|
3 and 10."
|
|
DEFVAL { 3 }
|
|
::= { ciscoLwappMcHaConfig 10 }
|
|
|
|
-- ********************************************************************
|
|
-- ciscoLwappMcRmiConfig
|
|
-- ********************************************************************
|
|
|
|
cLMcRmiConfigAction OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object allows user to remove the RMI
|
|
configuration. When get, 1 value indicating RMI
|
|
configuration is applied , 2 means clear config."
|
|
::= { ciscoLwappMcRmiConfig 1 }
|
|
|
|
|
|
cLMcRmiInterface OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object specifies Chassis/Switch number and
|
|
The value for this object is between 1 and 15."
|
|
::= { ciscoLwappMcRmiConfig 2 }
|
|
|
|
cLMcRmiChassisANum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object specifies Chassis/Switch number and
|
|
The value for this object is between 1 and 15."
|
|
DEFVAL { 1 }
|
|
::= { ciscoLwappMcRmiConfig 3 }
|
|
|
|
cLMcRmiChassisAIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object represents IP version to be used
|
|
for RMI transport"
|
|
::= { ciscoLwappMcRmiConfig 4 }
|
|
|
|
|
|
cLMcRmiChassisAIp OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object allows user to specify and get the
|
|
chassis. IPv4 Address to establish the RMI
|
|
communication. This IP Address will be assigned
|
|
to the RMI Port on the configuring chassis, and it
|
|
will be take effect only after a reload."
|
|
::= { ciscoLwappMcRmiConfig 5 }
|
|
|
|
cLMcRmiChassisBNum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object specifies Chassis/Switch number and
|
|
The value for this object is between 1 and 15."
|
|
DEFVAL { 1 }
|
|
::= { ciscoLwappMcRmiConfig 6 }
|
|
|
|
cLMcRmiChassisBIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object represents IP version to be used
|
|
for RMI transport"
|
|
::= { ciscoLwappMcRmiConfig 7 }
|
|
|
|
|
|
cLMcRmiChassisBIp OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object allows user to specify and get the
|
|
chassis. IPv4 Address to establish the RMI
|
|
communication. This IP Address will be assigned
|
|
to the RMI Port on the configuring chassis, and
|
|
it will be take effect only after a reload."
|
|
::= { ciscoLwappMcRmiConfig 8 }
|
|
|
|
|
|
cLMcRmiGatewayFailover OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object allows user to enable/disable
|
|
RMI Gateway-Failover configuration. When get,
|
|
TRUE value indicating RMI Gateway-Failover
|
|
configuration is enabled, FALSE means disabled."
|
|
DEFVAL { true }
|
|
::= { ciscoLwappMcRmiConfig 9 }
|
|
|
|
cLMcRmiGatewayFailoverInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (6..12)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object specifies Gateway-Failover interval and
|
|
The value for this object is between 6 and 12."
|
|
DEFVAL { 8 }
|
|
::= { ciscoLwappMcRmiConfig 10 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- cLHaNeworkRoutePeerTable
|
|
-- ********************************************************************
|
|
|
|
cLHaNetworkRoutePeerConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLHaNetworkRoutePeerConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the peer network route
|
|
entries."
|
|
::= { ciscoLwappHaNetworkConfig 1 }
|
|
|
|
cLHaNetworkRoutePeerConfigEntry OBJECT-TYPE
|
|
SYNTAX CLHaNetworkRoutePeerConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains configuration of peer network
|
|
route."
|
|
INDEX {
|
|
cLHaNetworkRoutePeerIPAddressType,
|
|
cLHaNetworkRoutePeerIPAddress
|
|
}
|
|
::= { cLHaNetworkRoutePeerConfigTable 1 }
|
|
|
|
CLHaNetworkRoutePeerConfigEntry ::= SEQUENCE {
|
|
cLHaNetworkRoutePeerIPAddressType InetAddressType,
|
|
cLHaNetworkRoutePeerIPAddress InetAddress,
|
|
cLHaNetworkRoutePeerIPNetmaskType InetAddressType,
|
|
cLHaNetworkRoutePeerIPNetmask InetAddress,
|
|
cLHaNetworkRoutePeerGatewayType InetAddressType,
|
|
cLHaNetworkRoutePeerGateway InetAddress,
|
|
cLHaNetworkRoutePeerTransferStatus INTEGER,
|
|
cLHaNetworkRoutePeerRowStatus RowStatus
|
|
}
|
|
|
|
cLHaNetworkRoutePeerIPAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents peer network route
|
|
IP address type."
|
|
::= { cLHaNetworkRoutePeerConfigEntry 1 }
|
|
|
|
cLHaNetworkRoutePeerIPAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents peer network route
|
|
IP address."
|
|
::= { cLHaNetworkRoutePeerConfigEntry 2 }
|
|
|
|
cLHaNetworkRoutePeerIPNetmaskType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies peer network route
|
|
IP netmask type."
|
|
::= { cLHaNetworkRoutePeerConfigEntry 3 }
|
|
|
|
cLHaNetworkRoutePeerIPNetmask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies peer network route
|
|
IP netmask."
|
|
::= { cLHaNetworkRoutePeerConfigEntry 4 }
|
|
|
|
cLHaNetworkRoutePeerGatewayType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents peer network route
|
|
gateway IP type."
|
|
::= { cLHaNetworkRoutePeerConfigEntry 5 }
|
|
|
|
cLHaNetworkRoutePeerGateway OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies peer network route
|
|
gateway IP address."
|
|
::= { cLHaNetworkRoutePeerConfigEntry 6 }
|
|
|
|
cLHaNetworkRoutePeerTransferStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initiate(1),
|
|
inProgress(2),
|
|
success(3),
|
|
failure(4),
|
|
timeout(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents peer network route transfer
|
|
status.
|
|
A value of initiate(1) indicates that, network route
|
|
transfer initiated.
|
|
A value of inProgress(2) indicates that, network route
|
|
transfer in progress.
|
|
A value of success(3) indicates that, network route
|
|
transfer success.
|
|
A value of failure(4) indicates that, network route
|
|
transfer failure.
|
|
A value of timeout(5) indicates that network route
|
|
transfer time out."
|
|
::= { cLHaNetworkRoutePeerConfigEntry 7 }
|
|
|
|
cLHaNetworkRoutePeerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies status column for this row
|
|
and used to create and delete specific instances
|
|
of rows in this table."
|
|
::= { cLHaNetworkRoutePeerConfigEntry 8 }
|
|
|
|
-- ********************************************************************
|
|
-- * Peer Statistics Variable
|
|
-- ********************************************************************
|
|
|
|
cLHaAllCpuUsage OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the all CPUs usage
|
|
of peer."
|
|
DEFVAL { "" }
|
|
::= { ciscoLwappHaCpuStatistics 1 }
|
|
|
|
cLHaPowerSupply1Present OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether peer switch power
|
|
Supply 1 is enabled or disabled.
|
|
A value of 'true' indicates that, peer switch
|
|
power supply 1 is enabled.
|
|
A value of 'false' indicates that, peer switch power
|
|
supply 1 is disabled."
|
|
DEFVAL { false }
|
|
::= { ciscoLwappHaPowerSupplyStatistics 1 }
|
|
|
|
cLHaPowerSupply1Operational OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether peer switch power
|
|
supply 1 operational or not.
|
|
A value of 'true' indicates that, peer switch power
|
|
supply 1 operational is enabled.
|
|
A value of 'false' indicates that, peer switch power
|
|
supply 1 operational is disabled."
|
|
DEFVAL { false }
|
|
::= { ciscoLwappHaPowerSupplyStatistics 2 }
|
|
|
|
cLHaPowerSupply2Present OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether peer switch power
|
|
supply 2 is enabled or disabled.
|
|
A value of 'true' indicates that, peer switch power
|
|
supply 2 is enabled.
|
|
A value of 'false' indicates that, peer switch power
|
|
supply 2 is disabled."
|
|
DEFVAL { false }
|
|
::= { ciscoLwappHaPowerSupplyStatistics 3 }
|
|
|
|
cLHaPowerSupply2Operational OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether Peer switch power
|
|
Supply 2 operational or not.
|
|
A value of 'true' indicates that, peer switch power
|
|
supply 2 operational is enabled.
|
|
A value of 'false' indicates that, peer switch power
|
|
supply 2 operational is disabled."
|
|
DEFVAL { false }
|
|
::= { ciscoLwappHaPowerSupplyStatistics 4 }
|
|
|
|
cLHaTotalSystemMemory OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total system memory in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 1 }
|
|
|
|
cLHaFreeSystemMemory OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the free system memory in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 2 }
|
|
|
|
cLHaUsedSystemMemory OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the used system memory in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 3 }
|
|
|
|
cLHaAllocatedFromRtos OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of bytes allocated
|
|
from RTOS in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 4 }
|
|
|
|
cLHaChunksFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of free chunks."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 5 }
|
|
|
|
cLHaMmappedRegions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of memory mapped regions."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 6 }
|
|
|
|
cLHaSpaceInMmappedRegions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the space in the memory mapped
|
|
regions in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 7 }
|
|
|
|
cLHaTotalAllocatedSpace OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total allocated space
|
|
in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 8 }
|
|
|
|
cLHaTotalNotInUseSpace OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total space not in-use in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 9 }
|
|
|
|
cLHaTopMostReleasableSpace OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the top most releasable space
|
|
in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 10 }
|
|
|
|
cLHaTotalAllocatedInclMmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total memory allocated including
|
|
memory map in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 11 }
|
|
|
|
cLHaTotalUsedMmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total memory in-use including
|
|
memory map in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 12 }
|
|
|
|
cLHaTotalFreeInclMmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total free memory including
|
|
memory map in Kbytes."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaMemoryStatistics 13 }
|
|
|
|
-- ********************************************************************
|
|
-- * HA statistics Variable
|
|
-- ********************************************************************
|
|
|
|
cLHaAvgPeerReachLatency OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents average value of peer controller
|
|
reachable latency in micro seconds."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaStatisticsVariable 1 }
|
|
|
|
cLHaAvgGwReachLatency OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents average value of default gate
|
|
way reachable latency in micro seconds."
|
|
DEFVAL { 0 }
|
|
::= { ciscoLwappHaStatisticsVariable 2 }
|
|
|
|
cLHaBulkSyncStatus OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents current status of bulk sync."
|
|
DEFVAL { "" }
|
|
::= { ciscoLwappHaStatisticsVariable 3 }
|
|
|
|
-- ********************************************************************
|
|
-- * NOTIFICATION Variable
|
|
-- ********************************************************************
|
|
|
|
cLHaSecondaryControllerUsageTrapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
usageStart(1),
|
|
usageComplete(2),
|
|
overUsage(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the usage of secondary controller.
|
|
After the usuage of 90 days, one trap is generated per
|
|
day for over usage.
|
|
A value of usageStart(1) indicates that, start of secondary
|
|
controller usage.
|
|
A value of usageComplete(2) indicates, that completion of
|
|
secondary controller usage period of 90 days.
|
|
A value of overUsage(3) indicates that, Secondary controller
|
|
overusage."
|
|
::= { ciscoLwappHaNotificationVariable 1 }
|
|
|
|
cLHaSecondaryControllerUsageDayCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of days the
|
|
secondary controller is used."
|
|
::= { ciscoLwappHaNotificationVariable 2 }
|
|
|
|
cLHaBulkSyncCompleteEvent OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bulkSyncComplete(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the time when the bulksync
|
|
was complete."
|
|
::= { ciscoLwappHaNotificationVariable 3 }
|
|
|
|
cLHaPeerHotStandbyEvent OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
haPeerHotstandby(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents that the peer has turned hot-standby."
|
|
::= { ciscoLwappHaNotificationVariable 4 }
|
|
|
|
cLHaSecondaryControllerUsageTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
cLHaSecondaryControllerUsageTrapType,
|
|
cLHaSecondaryControllerUsageDayCounter,
|
|
sysName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent on the event of a generic failure
|
|
between the active and peer unit."
|
|
::= { ciscoLwappHaMIBNotifs 1 }
|
|
|
|
cLHaRFSwapInfoTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
cLHaRFStatusUnitIp,
|
|
cRFStatusUnitState,
|
|
cLHaPeerIpAddress,
|
|
cRFStatusPeerUnitState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is sent by the active redundant
|
|
unit whenever its RF state changes or the RF state of the peer
|
|
unit changes.
|
|
|
|
To avoid a flurry of notifications for all state transitions,
|
|
notifications will only be sent for transitions to the
|
|
following RF states:
|
|
disabled (for the peer state)
|
|
standbyCold
|
|
standbyHot
|
|
active
|
|
activeExtraload."
|
|
::= { ciscoLwappHaMIBNotifs 2 }
|
|
|
|
cLHaBulkSyncCompleteTrap NOTIFICATION-TYPE
|
|
OBJECTS { cLHaBulkSyncCompleteEvent }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is sent by the active redundant
|
|
unit whenever the BulkSync to peer is complete."
|
|
::= { ciscoLwappHaMIBNotifs 3 }
|
|
|
|
cLHaPeerHotStandbyTrap NOTIFICATION-TYPE
|
|
OBJECTS { cLHaPeerHotStandbyEvent }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification is sent by the active redundant
|
|
unit whenever its peer unit turned hot-standby."
|
|
::= { ciscoLwappHaMIBNotifs 4 }
|
|
-- *******************************************************************
|
|
-- * Compliance statements
|
|
-- ********************************************************************
|
|
|
|
ciscoLwappHaMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIBConform 1 }
|
|
|
|
ciscoLwappHaMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoLwappHaMIBConform 2 }
|
|
|
|
|
|
ciscoLwappHaMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
--superceded by ciscoLwappHaMIBComplianceRev1
|
|
DESCRIPTION
|
|
"This is a default module-compliance
|
|
containing default object groups."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoLwappHaGlobalConfigGroup,
|
|
ciscoLwappHaNetworkConfigGroup,
|
|
ciscoLwappHaStatisticsGroup,
|
|
ciscoLwappHaMIBNotificationVariableGroup,
|
|
ciscoLwappHaMIBNotificationGroup,
|
|
ciscoLwappMcHaConfigGroup
|
|
}
|
|
::= { ciscoLwappHaMIBCompliances 1 }
|
|
|
|
ciscoLwappHaMIBComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a default module-compliance
|
|
containing default object groups."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoLwappHaGlobalConfigGroup,
|
|
ciscoLwappHaNetworkConfigGroup,
|
|
ciscoLwappHaStatisticsGroup,
|
|
ciscoLwappHaMIBNotificationVariableGroup,
|
|
ciscoLwappHaMIBNotificationGroup,
|
|
ciscoLwappMcHaConfigGroup,
|
|
ciscoLwappMcRmiConfigGroup
|
|
}
|
|
::= { ciscoLwappHaMIBCompliances 2 }
|
|
|
|
-- *******************************************************************
|
|
-- Units of Conformance
|
|
-- *******************************************************************
|
|
|
|
ciscoLwappHaGlobalConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cLHaApSsoConfig,
|
|
cLHaPeerIpAddressType,
|
|
cLHaPeerIpAddress,
|
|
cLHaServicePortPeerIpAddressType,
|
|
cLHaServicePortPeerIpAddress,
|
|
cLHaServicePortPeerIpNetMaskType,
|
|
cLHaServicePortPeerIpNetMask,
|
|
cLHaRedundancyIpAddressType,
|
|
cLHaRedundancyIpAddress,
|
|
cLHaPeerMacAddress,
|
|
cLHaVirtualMacAddress,
|
|
cLHaPrimaryUnit,
|
|
cLHaLinkEncryption,
|
|
cLHaNetworkFailOver,
|
|
cLHaRFStatusUnitIpType,
|
|
cLHaRFStatusUnitIp,
|
|
cLHaKATimeout,
|
|
cLHaKARetryCount,
|
|
cLHaGwRetryCount,
|
|
cLHaPeerSearchTimeout
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represents the information
|
|
about global config of the high availability objects on
|
|
the controller."
|
|
::= { ciscoLwappHaMIBGroups 1 }
|
|
|
|
ciscoLwappHaNetworkConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cLHaNetworkRoutePeerIPNetmaskType,
|
|
cLHaNetworkRoutePeerIPNetmask,
|
|
cLHaNetworkRoutePeerGatewayType,
|
|
cLHaNetworkRoutePeerGateway,
|
|
cLHaNetworkRoutePeerTransferStatus,
|
|
cLHaNetworkRoutePeerRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represents the information
|
|
about network config of the high availability objects on
|
|
the controller."
|
|
::= { ciscoLwappHaMIBGroups 2 }
|
|
|
|
ciscoLwappHaStatisticsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cLHaAvgPeerReachLatency,
|
|
cLHaAvgGwReachLatency,
|
|
cLHaBulkSyncStatus,
|
|
cLHaTotalSystemMemory,
|
|
cLHaFreeSystemMemory,
|
|
cLHaUsedSystemMemory,
|
|
cLHaAllocatedFromRtos,
|
|
cLHaChunksFree,
|
|
cLHaMmappedRegions,
|
|
cLHaSpaceInMmappedRegions,
|
|
cLHaTotalAllocatedSpace,
|
|
cLHaTotalNotInUseSpace,
|
|
cLHaTopMostReleasableSpace,
|
|
cLHaTotalAllocatedInclMmap,
|
|
cLHaTotalUsedMmap,
|
|
cLHaTotalFreeInclMmap,
|
|
cLHaAllCpuUsage,
|
|
cLHaPowerSupply1Present,
|
|
cLHaPowerSupply1Operational,
|
|
cLHaPowerSupply2Present,
|
|
cLHaPowerSupply2Operational
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represents the information
|
|
about the Statistics of high availability objects on the
|
|
controller."
|
|
::= { ciscoLwappHaMIBGroups 3 }
|
|
|
|
ciscoLwappHaMIBNotificationVariableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cLHaSecondaryControllerUsageTrapType,
|
|
cLHaSecondaryControllerUsageDayCounter,
|
|
cLHaBulkSyncCompleteEvent,
|
|
cLHaPeerHotStandbyEvent
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represents the information
|
|
about the Notification of high availability objects on
|
|
the controller."
|
|
::= { ciscoLwappHaMIBGroups 4 }
|
|
|
|
ciscoLwappHaMIBNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
cLHaSecondaryControllerUsageTrap,
|
|
cLHaRFSwapInfoTrap,
|
|
cLHaBulkSyncCompleteTrap,
|
|
cLHaPeerHotStandbyTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This supplemental collection of objects represents the
|
|
HA related notifications sent by the agent to a network
|
|
management station."
|
|
::= { ciscoLwappHaMIBGroups 5 }
|
|
|
|
ciscoLwappMcHaConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cLMcHaPortName,
|
|
cLMcHaPortLocIpAddrType,
|
|
cLMcHaPortLocIp,
|
|
cLMcHaPortMask,
|
|
cLMcHaPortRemoteIpAddrType,
|
|
cLMcHaPortRemIp,
|
|
cLMcHaKeepAliveTimeOut,
|
|
cLMcHaChassisPriority,
|
|
cLMcHaClearConfig,
|
|
cLMcHaKeepAliveRetryCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represents the information
|
|
about network config of the multi chassis high availability
|
|
RMI objects on the controller."
|
|
::= { ciscoLwappHaMIBGroups 6 }
|
|
|
|
ciscoLwappMcRmiConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cLMcRmiConfigAction,
|
|
cLMcRmiInterface,
|
|
cLMcRmiChassisANum,
|
|
cLMcRmiChassisAIpAddrType,
|
|
cLMcRmiChassisAIp,
|
|
cLMcRmiChassisBNum,
|
|
cLMcRmiChassisBIpAddrType,
|
|
cLMcRmiChassisBIp,
|
|
cLMcRmiGatewayFailover,
|
|
cLMcRmiGatewayFailoverInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This collection of objects represents the
|
|
information about network config of the multi
|
|
chassis RMI objects on the controller."
|
|
::= { ciscoLwappHaMIBGroups 7 }
|
|
|
|
END
|
|
|