898 lines
34 KiB
Plaintext
898 lines
34 KiB
Plaintext
-- *******************************************************************
|
|
-- CISCO-LWAPP-CDP-MIB.my
|
|
-- This Module describes about the Cisco Discovery Protocol.
|
|
-- Oct 2009 , Jobin Jose Sebastian
|
|
|
|
-- Copyright (c) 2007, 2009, 2017 by Cisco Systems Inc.
|
|
-- All rights reserved.
|
|
-- ******************************************************************
|
|
|
|
CISCO-LWAPP-CDP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Counter32,
|
|
Integer32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
InetAddress,
|
|
InetAddressType
|
|
FROM INET-ADDRESS-MIB
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
cLApSysMacAddress
|
|
FROM CISCO-LWAPP-AP-MIB
|
|
CLCdpAdvtVersionType
|
|
FROM CISCO-LWAPP-TC-MIB
|
|
CiscoNetworkProtocol,
|
|
CiscoNetworkAddress
|
|
FROM CISCO-TC
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * MODULE IDENTITY
|
|
-- ********************************************************************
|
|
|
|
ciscoLwappCdpMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201704270000Z"
|
|
ORGANIZATION "Cisco Systems Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems,
|
|
Customer Service
|
|
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
Email: cs-wnbu-snmcp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB is intended to be implemented on all those
|
|
devices operating as Central Controllers (CC) that
|
|
terminate the Light Weight Access Point Protocol
|
|
tunnel from Light-weight LWAPP Access Points.
|
|
|
|
This MIB provides configuration and status information
|
|
about CDP neighbors of LWAPP APs. The MIB provides
|
|
configuration of CDP feature on the LWAPP Access Points.
|
|
The MIB can also be used to retrieve the status of the
|
|
CDP cache information on the various LWAPP access
|
|
points.
|
|
|
|
The CDP MIB is also supported by controller and provides
|
|
configuration and status information about CDP neighbors
|
|
of the controller.
|
|
|
|
The relationship between CC and the LWAPP APs
|
|
can be depicted as follows:
|
|
|
|
+......+ +......+ +......+ +......+
|
|
+ + + + + + + +
|
|
+ CC + + CC + + CC + + CC +
|
|
+ + + + + + + +
|
|
+......+ +......+ +......+ +......+
|
|
.. . . .
|
|
.. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ AP + + AP + + AP + + AP + + AP +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
. . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
. . . . .
|
|
+......+ +......+ +......+ +......+ +......+
|
|
+ + + + + + + + + +
|
|
+ MN + + MN + + MN + + MN + + MN +
|
|
+ + + + + + + + + +
|
|
+......+ +......+ +......+ +......+ +......+
|
|
|
|
|
|
The LWAPP tunnel exists between the controller and
|
|
the APs. The MNs communicate with the APs through
|
|
the protocol defined by the 802.11 standard.
|
|
|
|
LWAPP APs, upon bootup, discover and join one of the
|
|
controllers and the controller pushes the configuration,
|
|
that includes the WLAN parameters, to the LWAPP APs.
|
|
The APs then encapsulate all the 802.11 frames from
|
|
wireless clients inside LWAPP frames and forward
|
|
the LWAPP frames to the controller.
|
|
|
|
GLOSSARY
|
|
|
|
Access Point ( AP )
|
|
|
|
An entity that contains an 802.11 medium access
|
|
control ( MAC ) and physical layer ( PHY ) interface
|
|
and provides access to the distribution services via
|
|
the wireless medium for associated clients.
|
|
|
|
LWAPP APs encapsulate all the 802.11 frames in
|
|
LWAPP frames and sends it to the controller to which
|
|
it is logically connected.
|
|
|
|
Basic Service Set Identifier (BSSID)
|
|
|
|
The identifier for the service set comprising of
|
|
all the 802.11 stations under the control of
|
|
one coordinating Access Point. This identifier
|
|
happens to be the MAC address of the dot11 radio
|
|
interface of the Access Point. The wireless
|
|
clients that associate with the Access Point
|
|
get the wired uplink through this particular
|
|
dot11 interface.
|
|
|
|
Central Controller ( CC )
|
|
|
|
The central entity that terminates the LWAPP protocol
|
|
tunnel from the LWAPP APs. Throughout this MIB,
|
|
this entity also referred to as 'controller'.
|
|
|
|
Light Weight Access Point Protocol ( LWAPP )
|
|
|
|
This is a generic protocol that defines the
|
|
communication between the Access Points and the
|
|
central controller.
|
|
|
|
Cisco Discovery Protocol ( CDP )
|
|
|
|
Protocol for discovery of neighboring devices.
|
|
|
|
|
|
REFERENCE
|
|
|
|
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
|
|
and Physical Layer ( PHY ) Specifications.
|
|
|
|
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
|
|
Weight Access Point Protocol."
|
|
REVISION "201704270000Z"
|
|
DESCRIPTION
|
|
"Updated the description for some objects."
|
|
REVISION "200911230000Z"
|
|
DESCRIPTION
|
|
"Added the variables clcCdpApCacheDuplex and
|
|
clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable."
|
|
REVISION "200703280000Z"
|
|
DESCRIPTION
|
|
"This is the initial version of this module."
|
|
::= { ciscoMgmt 623 }
|
|
|
|
|
|
ciscoLwappCdpMIBNotifs OBJECT IDENTIFIER
|
|
::= { ciscoLwappCdpMIB 0 }
|
|
|
|
ciscoLwappCdpMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoLwappCdpMIB 1 }
|
|
|
|
ciscoLwappCdpMIBConform OBJECT IDENTIFIER
|
|
::= { ciscoLwappCdpMIB 2 }
|
|
|
|
clcCdpTraffic OBJECT IDENTIFIER
|
|
::= { ciscoLwappCdpMIBObjects 1 }
|
|
|
|
clcCdpGlobalConfig OBJECT IDENTIFIER
|
|
::= { ciscoLwappCdpMIBObjects 2 }
|
|
|
|
clcCdpApCacheStatus OBJECT IDENTIFIER
|
|
::= { ciscoLwappCdpMIBObjects 3 }
|
|
|
|
clcCdpApCacheConfig OBJECT IDENTIFIER
|
|
::= { ciscoLwappCdpMIBObjects 4 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- The CDP Traffic Metrics
|
|
-- *******************************************************************
|
|
|
|
clcCdpInPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total number of CDP packets
|
|
received by the controller."
|
|
::= { clcCdpTraffic 1 }
|
|
|
|
clcCdpOutPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total number of CDP packets
|
|
sent by the controller."
|
|
::= { clcCdpTraffic 2 }
|
|
|
|
clcCdpChecksumErrorPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total number of CDP packets
|
|
with checksum error."
|
|
::= { clcCdpTraffic 3 }
|
|
|
|
clcCdpNoMemoryPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total number of CDP packets
|
|
that were dropped because of no memory availability. "
|
|
::= { clcCdpTraffic 4 }
|
|
|
|
clcCdpInvalidPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total number of CDP packets
|
|
that were invalid. "
|
|
::= { clcCdpTraffic 5 }
|
|
|
|
-- ********************************************************************
|
|
-- * Global CDP Configuration
|
|
-- ********************************************************************
|
|
|
|
clcCdpAdvtVersion OBJECT-TYPE
|
|
SYNTAX CLCdpAdvtVersionType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies CDP advertisement version. "
|
|
DEFVAL { cdpv1 }
|
|
::= { clcCdpGlobalConfig 1 }
|
|
|
|
clcCdpMessageInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (5..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interval (in seconds) at which
|
|
CDP messages are to be generated. "
|
|
DEFVAL { 60 }
|
|
::= { clcCdpGlobalConfig 2 }
|
|
|
|
clcCdpGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether CDP has to be enabled or
|
|
disabled on all APs.
|
|
When set to 'true', internally CDP is enabled
|
|
on all APs associated with the controller.
|
|
When set to 'false', internally CDP is disabled
|
|
on all APs associated with the controller.
|
|
However, setting this attribute has no effect when CDP
|
|
is disabled globally, that is when the cdpGlobalRun from
|
|
the CISCO-CDP-MIB is set to 'false' on the controller."
|
|
DEFVAL { false }
|
|
::= { clcCdpGlobalConfig 3 }
|
|
-- *******************************************************************
|
|
-- The CDP configurations at AP level
|
|
-- *******************************************************************
|
|
|
|
clcCdpApTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClcCdpApEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table contains the status of Cisco
|
|
Discovery Protocol on LWAPP Access Points. An entry is
|
|
added to the table when an Aceess Point joins a controller.
|
|
An entry is deleted when the Access Point disassociates
|
|
from the controller. This table is used to configure CDP
|
|
feature per Access Point."
|
|
::= { clcCdpApCacheConfig 1 }
|
|
|
|
clcCdpApEntry OBJECT-TYPE
|
|
SYNTAX ClcCdpApEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the clcCdpApTable,
|
|
containing the status of CDP on an AP.
|
|
|
|
Consider a setup where two APs, 'AP1' and 'AP2'
|
|
have been connected to a CISCO-3750 switch.
|
|
Both the APs register with WLAN CONTROLLER 440x
|
|
which is on LAN/Internet/Intranet.
|
|
|
|
+.........................+
|
|
+ +
|
|
+ WLAN CONTROLLER 4400 +
|
|
+ 10.14.2.11 +
|
|
+.........................+
|
|
..
|
|
..
|
|
INTERNET .. LAN
|
|
..
|
|
+...............+
|
|
+ +
|
|
+ SWITCH-3750 +
|
|
+ 10.16.1.1 +
|
|
+...............+
|
|
..
|
|
. .
|
|
. .
|
|
. .
|
|
. .
|
|
. .
|
|
+......+ +......+
|
|
+ + + +
|
|
+ AP1 + + AP2 +
|
|
+ + + +
|
|
+......+ +......+
|
|
|
|
00:12:CF:DA:29:11 23:43:CE:9A:66:76
|
|
|
|
10.16.1.43 10.16.1.45
|
|
|
|
Given the above example, the clcCdpApEntry on
|
|
WLAN CONTROLLER 4400 looks like :
|
|
|
|
------------------------------------------------------------------
|
|
| MIB - ATTRIBUTES | ROW#1 | ROW#2 |
|
|
------------------------------------------------------------------
|
|
| cLApSysMacAddress | 00:12:CF:DA:29:11 | 23:43:CE:9A:66:76 |
|
|
------------------------------------------------------------------
|
|
| clcCdpApStatus | true | false |
|
|
------------------------------------------------------------------"
|
|
INDEX { cLApSysMacAddress }
|
|
::= { clcCdpApTable 1 }
|
|
|
|
ClcCdpApEntry ::= SEQUENCE {
|
|
clcCdpApCdpEnable TruthValue
|
|
}
|
|
|
|
clcCdpApCdpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the Cisco Discovery Protocol
|
|
is currently running on this AP.
|
|
When set to 'true', that means CDP is enabled on
|
|
the AP denoted by MAC address cLApSysMacAddress.
|
|
When set to 'false', that means CDP is disabled on
|
|
the AP denoted by MAC address cLApSysMacAddress.
|
|
|
|
This variable has no effect when CDP is globally
|
|
disabled. That is when the cdpGlobalRun from the
|
|
CISCO-CDP-MIB is set to 'false'. "
|
|
DEFVAL { false }
|
|
::= { clcCdpApEntry 1 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- The CDP-AP Address Cache Table
|
|
-- *******************************************************************
|
|
|
|
clcCdpApCacheTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClcCdpApCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the cached neighbor
|
|
information obtained via receiving CDP messages on APs.
|
|
Entries are added to this table when a CDP advertisement
|
|
is received from a neighboring device. Entries get deleted
|
|
when CDP is disabled on the interface or globally."
|
|
::= { clcCdpApCacheStatus 1 }
|
|
|
|
clcCdpApCacheEntry OBJECT-TYPE
|
|
SYNTAX ClcCdpApCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the clcCdpApCacheTable,
|
|
containing the information received via CDP on one
|
|
interface from one device. Entries appear when
|
|
a CDP advertisement is received from a neighbor
|
|
device. Entries disappear when CDP is disabled
|
|
on the interface or globally.
|
|
|
|
Consider a setup where two APs, 'AP1' and 'AP2'
|
|
have been connected to a CISCO-3750 switch.
|
|
Both the APs register with WLAN CONTROLLER 4400
|
|
which is on LAN/Internet/Intranet.
|
|
|
|
+.........................+
|
|
+ +
|
|
+ WLAN CONTROLLER 4400 +
|
|
+ 10.14.2.11 +
|
|
+.........................+
|
|
..
|
|
..
|
|
INTERNET .. LAN
|
|
..
|
|
+...............+
|
|
+ +
|
|
+ SWITCH-3750 +
|
|
+ 10.16.1.1 +
|
|
+...............+
|
|
FE 0/13 .. FE 0/15
|
|
. .
|
|
. .
|
|
. .
|
|
. .
|
|
. .
|
|
+......+ +......+
|
|
+ + + +
|
|
+ AP1 + + AP2 +
|
|
+ + + +
|
|
+......+ +......+
|
|
|
|
00:12:CF:DA:29:11 23:43:CE:9A:66:76
|
|
|
|
10.16.1.43 10.16.1.45
|
|
|
|
Given the above example, the clcCdpApEntry on
|
|
WLAN CONTROLLER 4400 looks like :
|
|
|
|
----------------------------------------------------------------------
|
|
| MIB - ATTRIBUTES | ROW#1 | ROW#2 |
|
|
----------------------------------------------------------------------
|
|
| cLApSysMacAddress | 00:12:CF:DA:29:11 | 23:43:CE:9A:66:76|
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheDeviceIndex | 16 | 16 |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheApName | AP1 | AP2 |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheApAddressType | ip(1) | ip(1) |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheApAddress | 10.16.1.43 | 10.16.1.45 |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheLocalInterface | Port - 1 | Port -2 |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheNeighName | SWITCH-3750 | SWITCH-3750 |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheNeighAddressType| ip(1) | ip(1) |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheNeighAddress | 10.16.1.1 | 10.16.1.1 |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheNeighInterface | FE 0/13 | FE 0/45 |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheNeighVersion | IOS Ver2.2. ... | IOS Ver 2.2. ... |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheAdvtVersion | cdpv1(1) | cdpv2(2) |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCachePlatform | WS-C3750-24P | WS-C3750-24P |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheCapabilities | RSI | RSI |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheHoldtimeLeft | 179 | 165 |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheDuplex | fullduplex(3) | fullduplex(3) |
|
|
----------------------------------------------------------------------
|
|
| clcCdpApCacheInterfaceSpeed | hundredMbps(2) | hundredMbps(2) |
|
|
----------------------------------------------------------------------"
|
|
INDEX {
|
|
cLApSysMacAddress,
|
|
clcCdpApCacheDeviceIndex
|
|
}
|
|
::= { clcCdpApCacheTable 1 }
|
|
|
|
ClcCdpApCacheEntry ::=
|
|
SEQUENCE {
|
|
clcCdpApCacheDeviceIndex Unsigned32,
|
|
clcCdpApCacheApName SnmpAdminString,
|
|
clcCdpApCacheApAddressType InetAddressType,
|
|
clcCdpApCacheApAddress InetAddress,
|
|
clcCdpApCacheLocalInterface InterfaceIndexOrZero,
|
|
clcCdpApCacheNeighName SnmpAdminString,
|
|
clcCdpApCacheNeighAddressType InetAddressType,
|
|
clcCdpApCacheNeighAddress InetAddress,
|
|
clcCdpApCacheNeighInterface SnmpAdminString,
|
|
clcCdpApCacheNeighVersion SnmpAdminString,
|
|
clcCdpApCacheAdvtVersion CLCdpAdvtVersionType,
|
|
clcCdpApCachePlatform SnmpAdminString,
|
|
clcCdpApCacheCapabilities OCTET STRING,
|
|
clcCdpApCacheHoldtimeLeft Unsigned32,
|
|
clcCdpApCacheDuplex INTEGER,
|
|
clcCdpApCacheInterfaceSpeed INTEGER
|
|
}
|
|
|
|
clcCdpApCacheDeviceIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents a unique value for each device
|
|
from which CDP messages are being received."
|
|
::= { clcCdpApCacheEntry 1 }
|
|
|
|
clcCdpApCacheApName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the name assigned to this AP.
|
|
If an AP is not configured its factory default name will
|
|
be ap:<last three byte of MACAddress>. Eg. ap:af:12:be"
|
|
::= { clcCdpApCacheEntry 2 }
|
|
|
|
clcCdpApCacheApAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type of address contained in
|
|
the corresponding instance of clcCdpApCacheAddress for
|
|
the AP."
|
|
::= { clcCdpApCacheEntry 3 }
|
|
|
|
clcCdpApCacheApAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the IP address of the AP."
|
|
::= { clcCdpApCacheEntry 4 }
|
|
|
|
clcCdpApCacheLocalInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the local port on which LWAPP
|
|
encapsulated CDP packets were received."
|
|
::= { clcCdpApCacheEntry 5 }
|
|
|
|
clcCdpApCacheNeighName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Device-ID string as reported in
|
|
the most recent CDP message. The zero-length string
|
|
indicates no Device-ID field (TLV) was reported in the most
|
|
recent CDP message."
|
|
::= { clcCdpApCacheEntry 6 }
|
|
|
|
clcCdpApCacheNeighAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type of address contained in the
|
|
corresponding instance of clcCdpApCacheAddress of
|
|
neighbor. "
|
|
::= { clcCdpApCacheEntry 7 }
|
|
|
|
clcCdpApCacheNeighAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the (first) network-layer address
|
|
of the device's SNMP-agent as reported in the most recent
|
|
CDP message. For example, if the corresponding instance
|
|
of clcCdpApCacheApAddressType had the value 'ip(1)', then
|
|
this object would be an IP-address. "
|
|
::= { clcCdpApCacheEntry 8 }
|
|
|
|
clcCdpApCacheNeighInterface OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Port-ID string as reported in
|
|
the most recent CDP message. This will typically be the
|
|
value of the ifName object (e.g., 'Ethernet0'). The
|
|
zero-length string indicates no Port-ID field (TLV) was
|
|
reported in the most recent CDP message. "
|
|
::= { clcCdpApCacheEntry 9 }
|
|
|
|
clcCdpApCacheNeighVersion OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the version string which refers to
|
|
the software running on neighboring device."
|
|
::= { clcCdpApCacheEntry 10 }
|
|
|
|
clcCdpApCacheAdvtVersion OBJECT-TYPE
|
|
SYNTAX CLCdpAdvtVersionType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Cisco Discovery Protocol
|
|
advertisement version."
|
|
DEFVAL { cdpv1 }
|
|
::= { clcCdpApCacheEntry 11 }
|
|
|
|
clcCdpApCachePlatform OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the device's hardware platform
|
|
as reported in the most recent CDP message. The zero-length
|
|
string indicates that no platform field(TLV) was reported
|
|
in the most recent CDP message. "
|
|
::= { clcCdpApCacheEntry 12 }
|
|
|
|
clcCdpApCacheCapabilities OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the device's functional capabilities
|
|
as reported in the most recent CDP message. For latest set
|
|
of specific values, see the latest version of the CDP
|
|
specification. The zero-length string indicates no
|
|
capabilities field(TLV) was reported in the most recent
|
|
CDP message. "
|
|
::= { clcCdpApCacheEntry 13 }
|
|
|
|
clcCdpApCacheHoldtimeLeft OBJECT-TYPE
|
|
SYNTAX Unsigned32 (10..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the time left in seconds before
|
|
the CDP neighbor entry gets aged-out. "
|
|
DEFVAL { 180 }
|
|
::= { clcCdpApCacheEntry 14 }
|
|
|
|
clcCdpApCacheDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
fullduplex(2),
|
|
halfduplex(3),
|
|
auto(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the duplex mode of the
|
|
ethernet interface between the AP and it's
|
|
neighboring CDP device, as reported in the most recent
|
|
CDP message.
|
|
unknown(1) - indicates no duplex mode field (TLV) was
|
|
reported in the most recent CDP message or the
|
|
neighboring device is not connected to the AP through
|
|
ethernet interface.
|
|
fullduplex(2) - indicates that duplex mode of the ethernet
|
|
interface between the AP and it's neighboring CDP device
|
|
is set to fullduplex mode.
|
|
halfduplex(3) - indicates that duplex mode of the ethernet
|
|
interface between the AP and it's neighboring CDP device
|
|
is set to halfduplex mode.
|
|
auto(4) - indicates that duplex mode of the ethernet
|
|
interface between the AP and it's neighboring CDP
|
|
device is set to auto mode."
|
|
::= { clcCdpApCacheEntry 15 }
|
|
|
|
clcCdpApCacheInterfaceSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
tenMbps(2),
|
|
hundredMbps(3),
|
|
thousandMbps(4),
|
|
auto(5)
|
|
}
|
|
UNITS "Mbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the speed of the ethernet
|
|
interface between the AP and it's neighboring CDP
|
|
device. The unit is Mbps. This variable would be
|
|
populated at AP join and periodically thereafter.
|
|
none(1)- would be shown if the interface is not an
|
|
ethernet interface.
|
|
tenMbps(2) - indicates that the speed of the ethernet
|
|
interface between the AP and it's neighboring CDP
|
|
device is 10 Mbps.
|
|
hundredMbps(3) - indicates that the speed of the ethernet
|
|
interface between the AP and it's neighboring CDP device
|
|
is 100 Mbps.
|
|
thousandMbps(4) - indicates that the speed of the ethernet
|
|
interface between the AP and it's neighboring CDP device
|
|
is 1000 Mbps.
|
|
auto(5) - indicates that the speed of the ethernet
|
|
interface between the AP and it's neighboring CDP device
|
|
is auto ."
|
|
::= { clcCdpApCacheEntry 16 }
|
|
|
|
clcCdpCtAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClcCdpCtAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table contains the list of
|
|
network-layer addresses of a neighbor interface,
|
|
as reported in the Address TLV of the most recently
|
|
received CDP message. The first address included in
|
|
the Address TLV is saved in cdpCacheAddress. This
|
|
table contains the remainder of the addresses in the
|
|
Address TLV."
|
|
::= { clcCdpApCacheStatus 2 }
|
|
|
|
clcCdpCtAddressEntry OBJECT-TYPE
|
|
SYNTAX ClcCdpCtAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the clcCdpCtAddressTable,
|
|
containing the information on one address received via CDP
|
|
on one interface from one device. Entries appear
|
|
when a CDP advertisement is received from a neighbor
|
|
device, with an Address TLV. Entries disappear when
|
|
CDP is disabled on the interface, or globally. An entry
|
|
or entries would also disappear if the most recently
|
|
received CDP packet contain fewer address entries in the
|
|
Address TLV, than are currently present in the CDP cache. "
|
|
INDEX { cLApSysMacAddress, clcCdpApCacheDeviceIndex,
|
|
clcCdpCtAddressIndex }
|
|
::= { clcCdpCtAddressTable 1 }
|
|
|
|
ClcCdpCtAddressEntry ::= SEQUENCE {
|
|
clcCdpCtAddressIndex Integer32,
|
|
clcCdpCtAddressType CiscoNetworkProtocol,
|
|
clcCdpCtAddress CiscoNetworkAddress
|
|
}
|
|
|
|
clcCdpCtAddressIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the index of the address entry
|
|
for a given cLApSysMacAddress,cdpCacheDeviceIndex pair. It
|
|
has the value N-1 for the N-th address in the
|
|
Address TLV."
|
|
::= { clcCdpCtAddressEntry 1 }
|
|
|
|
clcCdpCtAddressType OBJECT-TYPE
|
|
SYNTAX CiscoNetworkProtocol
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type of address contained in the
|
|
corresponding instance of clcCdpCtAddress."
|
|
::= { clcCdpCtAddressEntry 2 }
|
|
|
|
clcCdpCtAddress OBJECT-TYPE
|
|
SYNTAX CiscoNetworkAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the N-th network-layer address of
|
|
the device as reported in the most recent CDP message's
|
|
address TLV, where N-1 is given by the value of
|
|
clcCdpCtAddressIndex. For example, if the corresponding
|
|
instance of clcCdpCtAddressType had the value 'ip(1)',
|
|
then this object would be an IPv4-address.
|
|
NOTE - The 1ast address received in the address TLV is
|
|
available using cdpCacheAddress"
|
|
::= { clcCdpCtAddressEntry 3 }
|
|
|
|
-- *******************************************************************
|
|
-- * Compliance statements
|
|
-- *******************************************************************
|
|
|
|
ciscoLwappCdpMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoLwappCdpMIBConform 1 }
|
|
|
|
ciscoLwappCdpMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoLwappCdpMIBConform 2 }
|
|
|
|
|
|
ciscoLwappCdpMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoLwappCdpMIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
clcCdpRev01ConfigGroup,
|
|
clcCdpRev01StatusGroup
|
|
}
|
|
::= { ciscoLwappCdpMIBCompliances 1 }
|
|
|
|
ciscoLwappCdpMIBComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoLwappCdpMIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
clcCdpRev01ConfigGroup,
|
|
clcCdpRev01StatusGroup,
|
|
clcCdpRev02StatusGroup
|
|
}
|
|
::= { ciscoLwappCdpMIBCompliances 2 }
|
|
|
|
-- *******************************************************************
|
|
-- * Units of conformance
|
|
-- *******************************************************************
|
|
|
|
clcCdpRev01ConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clcCdpApCdpEnable,
|
|
clcCdpAdvtVersion,
|
|
clcCdpMessageInterval,
|
|
clcCdpGlobalEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a collection of objects which can configured to
|
|
control functional parameters of Cisco Discovery Protocol
|
|
feature in WLAN controllers and LWAPP APs."
|
|
::= { ciscoLwappCdpMIBGroups 1 }
|
|
|
|
clcCdpRev01StatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clcCdpApCacheApName,
|
|
clcCdpApCacheApAddressType,
|
|
clcCdpApCacheApAddress,
|
|
clcCdpApCacheLocalInterface,
|
|
clcCdpApCacheNeighName,
|
|
clcCdpApCacheNeighAddressType,
|
|
clcCdpApCacheNeighAddress,
|
|
clcCdpApCacheNeighInterface,
|
|
clcCdpApCacheNeighVersion,
|
|
clcCdpApCacheAdvtVersion,
|
|
clcCdpApCachePlatform,
|
|
clcCdpApCacheCapabilities,
|
|
clcCdpApCacheHoldtimeLeft,
|
|
clcCdpInPackets,
|
|
clcCdpOutPackets,
|
|
clcCdpChecksumErrorPackets,
|
|
clcCdpNoMemoryPackets,
|
|
clcCdpInvalidPackets
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represents the information
|
|
about the general status attributes of Cisco Discovery
|
|
Protocol in WLAN controllers and LWAPP APs."
|
|
::= { ciscoLwappCdpMIBGroups 2 }
|
|
|
|
clcCdpRev02StatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clcCdpApCacheDuplex,
|
|
clcCdpApCacheInterfaceSpeed
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These are the additional objects which represent
|
|
the information about the general status attributes
|
|
of Cisco Discovery Protocol in WLAN controllers and
|
|
LWAPP APs."
|
|
::= { ciscoLwappCdpMIBGroups 3 }
|
|
|
|
END
|
|
|
|
|