3198 lines
115 KiB
Plaintext
3198 lines
115 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-DYNAMIC-TEMPLATE-MIB
|
|
-- Definitions of managed objects describing dynamic templates.
|
|
--
|
|
-- September 2007, Patrick R. Gili
|
|
--
|
|
-- Copyright (c) 2007, 2012 by Cisco Systems Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-DYNAMIC-TEMPLATE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MacAddress,
|
|
RowStatus,
|
|
StorageType,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
CiscoVrfName
|
|
FROM CISCO-TC
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
InetAddressIPv4,
|
|
InetAddressIPv6,
|
|
InetAddressPrefixLength
|
|
FROM INET-ADDRESS-MIB
|
|
CbpElementName
|
|
FROM CISCO-CBP-TC-MIB
|
|
DynamicTemplateName,
|
|
DynamicTemplateType,
|
|
DynamicTemplateTargetType,
|
|
DynamicTemplateTargetId
|
|
FROM CISCO-DYNAMIC-TEMPLATE-TC-MIB
|
|
UnicastRpfType,
|
|
UnicastRpfOptions
|
|
FROM CISCO-IP-URPF-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoDynamicTemplateMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200709060000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB defines objects that describe dynamic templates. A
|
|
dynamic template is a set of configuration attributes that a
|
|
system can dynamically apply to a target.
|
|
|
|
The target of a dynamic template is the entity configured by the
|
|
system using the configuration attributes contained by a
|
|
template. At the time of this writing, an interface represents
|
|
the only valid target of a dynamic template. However, the
|
|
architecture does not prevent other target types, and hence, the
|
|
MIB definition generalizes the notion of a target to allow for
|
|
this.
|
|
|
|
Generally, the system does not directly apply the attributes
|
|
contained by a dynamic template to an associated
|
|
target. The system might generate a derived configuration from
|
|
the set of dynamic templates associated with the target. A
|
|
derived configuration represents the union of the configuration
|
|
attributes contained by each associated dynamic template. In
|
|
the case of a conflict (i.e., more than one dynamic template
|
|
specifies the same configuration attribute), the system accepts
|
|
the configuration attribute from the dynamic template with the
|
|
highest precedence."
|
|
REVISION "200709060000Z"
|
|
DESCRIPTION
|
|
"The initial version of the MIB module."
|
|
::= { ciscoMgmt 784 }
|
|
|
|
|
|
-- Top-Level Trees
|
|
|
|
ciscoDynamicTemplateMIBNotifs OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIB 0 }
|
|
|
|
ciscoDynamicTemplateMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIB 1 }
|
|
|
|
ciscoDynamicTemplateMIBConform OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIB 2 }
|
|
|
|
-- Object Sub-trees
|
|
|
|
cdtBase OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIBObjects 1 }
|
|
|
|
cdtCommonIf OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIBObjects 2 }
|
|
|
|
cdtPpp OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIBObjects 3 }
|
|
|
|
cdtEthernet OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIBObjects 4 }
|
|
|
|
cdtIpSubscriber OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIBObjects 5 }
|
|
|
|
cdtService OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIBObjects 6 }
|
|
|
|
cdtSubscriberGroup OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIBObjects 7 }
|
|
|
|
-- Objects
|
|
|
|
cdtTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CdtTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the dynamic templates maintained by the
|
|
system, including those that have been locally-configured on the
|
|
system and those pushed to the system by external policy
|
|
servers."
|
|
::= { cdtBase 1 }
|
|
|
|
cdtTemplateEntry OBJECT-TYPE
|
|
SYNTAX CdtTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describes a dynamic template, which serves as a
|
|
container for configuration attributes. The configuration
|
|
attributes contained by a dynamic template depends on its type.
|
|
|
|
The system automatically creates a corresponding entry when a
|
|
dynamic template has been created through another management
|
|
entity (e.g., the system's local console). Likewise, the system
|
|
automatically destroys a corresponding entry when a dynamic
|
|
template has been destroyed through another management entity.
|
|
|
|
The system automatically creates a corresponding entry when an
|
|
external policy server pushes a user profile or a service
|
|
profile to the system.
|
|
|
|
The system automatically creates a corresponding entry when it
|
|
generates a derived configuration."
|
|
INDEX { cdtTemplateName }
|
|
::= { cdtTemplateTable 1 }
|
|
|
|
CdtTemplateEntry ::= SEQUENCE {
|
|
cdtTemplateName DynamicTemplateName,
|
|
cdtTemplateStatus RowStatus,
|
|
cdtTemplateStorage StorageType,
|
|
cdtTemplateType DynamicTemplateType,
|
|
cdtTemplateSrc INTEGER,
|
|
cdtTemplateUsageCount Unsigned32
|
|
}
|
|
|
|
cdtTemplateName OBJECT-TYPE
|
|
SYNTAX DynamicTemplateName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates a string-value that uniquely identifies
|
|
the dynamic template.
|
|
|
|
If the corresponding instance of cdtTemplateSrc is not
|
|
'local', then the system automatically generates the name
|
|
identifying the dynamic template."
|
|
::= { cdtTemplateEntry 1 }
|
|
|
|
cdtTemplateStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of the dynamic template. The
|
|
following columns must be valid before activating a dynamic
|
|
template:
|
|
|
|
- cdtTemplateStorage
|
|
- cdtTemplateType
|
|
|
|
However, these objects specify a default value. Thus, it is
|
|
possible to use create-and-go semantics without setting any
|
|
additional columns.
|
|
|
|
An implementation must allow the EMS/NMS to modify any column
|
|
when this column is 'active', including columns defined in
|
|
tables that have a one-to-one or sparse dependent relationship
|
|
on this table."
|
|
::= { cdtTemplateEntry 2 }
|
|
|
|
cdtTemplateStorage OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies what happens to the dynamic template
|
|
upon restart.
|
|
|
|
If the corresponding instance of cdtTemplateSrc is not
|
|
'local', then this column must be 'volatile'."
|
|
DEFVAL { volatile }
|
|
::= { cdtTemplateEntry 3 }
|
|
|
|
cdtTemplateType OBJECT-TYPE
|
|
SYNTAX DynamicTemplateType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the types of dynamic template."
|
|
DEFVAL { other }
|
|
::= { cdtTemplateEntry 4 }
|
|
|
|
cdtTemplateSrc OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
derived(2),
|
|
local(3),
|
|
aaaUserProfile(4),
|
|
aaaServiceProfile(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the source of the dynamic template:
|
|
|
|
'other'
|
|
The implementation of the MIB module does not recognize the
|
|
source of the dynamic template.
|
|
|
|
'derived'
|
|
The system created the set of attributes from one or
|
|
more dynamic templates.
|
|
|
|
'local'
|
|
The dynamic template was locally configured through a
|
|
management entity, such as the local console or a SNMP
|
|
entity.
|
|
|
|
'aaaUserProfile'
|
|
The dynamic template originated from a user profile
|
|
pushed from an external policy server.
|
|
|
|
'aaaServiceProfile'
|
|
The dynamic template originated from a service profile
|
|
pushed from an external policy server."
|
|
::= { cdtTemplateEntry 5 }
|
|
|
|
cdtTemplateUsageCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of targets using a dynamic template"
|
|
::= { cdtTemplateEntry 6 }
|
|
|
|
|
|
|
|
cdtTemplateTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CdtTemplateTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of targets associated with
|
|
one or more dynamic templates."
|
|
::= { cdtBase 2 }
|
|
|
|
cdtTemplateTargetEntry OBJECT-TYPE
|
|
SYNTAX CdtTemplateTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry describes a target associated with one or more
|
|
dynamic templates.
|
|
|
|
The system automatically creates an entry when it associates a
|
|
dynamic template to a target. Likewise, the system
|
|
automatically destroys an entry when a target no longer has any
|
|
associated dynamic templates."
|
|
INDEX {
|
|
cdtTemplateTargetType,
|
|
cdtTemplateTargetId
|
|
}
|
|
::= { cdtTemplateTargetTable 1 }
|
|
|
|
CdtTemplateTargetEntry ::= SEQUENCE {
|
|
cdtTemplateTargetType DynamicTemplateTargetType,
|
|
cdtTemplateTargetId DynamicTemplateTargetId,
|
|
cdtTemplateTargetStatus RowStatus,
|
|
cdtTemplateTargetStorage StorageType
|
|
}
|
|
|
|
cdtTemplateTargetType OBJECT-TYPE
|
|
SYNTAX DynamicTemplateTargetType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of target."
|
|
::= { cdtTemplateTargetEntry 1 }
|
|
|
|
cdtTemplateTargetId OBJECT-TYPE
|
|
SYNTAX DynamicTemplateTargetId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object uniquely identifies the target within the scope of
|
|
its type."
|
|
::= { cdtTemplateTargetEntry 2 }
|
|
|
|
cdtTemplateTargetStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of the dynamic template
|
|
target. The following columns must be valid before activating a
|
|
subscriber access profile:
|
|
|
|
- cdtTemplateTargetStorage
|
|
|
|
However, these objects specify a default value. Thus, it is
|
|
possible to use create-and-go semantics without setting any
|
|
additional columns.
|
|
|
|
An implementation must allow the EMS/NMS to modify any column
|
|
when this column is 'active', including columns defined in
|
|
tables that have a one-to-one or sparse dependent relationship
|
|
on this table."
|
|
::= { cdtTemplateTargetEntry 3 }
|
|
|
|
cdtTemplateTargetStorage OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies what happens to the dynamic template
|
|
target upon restart."
|
|
DEFVAL { volatile }
|
|
::= { cdtTemplateTargetEntry 4 }
|
|
|
|
|
|
|
|
cdtTemplateAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CdtTemplateAssociationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of templates associated with each
|
|
target.
|
|
|
|
This table has an expansion dependent relationship on the
|
|
cdtTemplateTargetTable, containing zero or more rows for each
|
|
target."
|
|
::= { cdtBase 3 }
|
|
|
|
cdtTemplateAssociationEntry OBJECT-TYPE
|
|
SYNTAX CdtTemplateAssociationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry indicates an association of a dynamic template with a
|
|
target.
|
|
|
|
The system automatically creates an entry when it associates a
|
|
dynamic template to a target.
|
|
|
|
The system also creates an entry when it derives the
|
|
configuration that it applies to a target.
|
|
|
|
The system automatically destroys an entry under the following
|
|
circumstances:
|
|
|
|
1) The target indicated by the entry no longer exists.
|
|
|
|
2) The association between the target and the dynamic template
|
|
no longer exists."
|
|
INDEX {
|
|
cdtTemplateTargetType,
|
|
cdtTemplateTargetId,
|
|
cdtTemplateAssociationName
|
|
}
|
|
::= { cdtTemplateAssociationTable 1 }
|
|
|
|
CdtTemplateAssociationEntry ::= SEQUENCE {
|
|
cdtTemplateAssociationName DynamicTemplateName,
|
|
cdtTemplateAssociationPrecedence Unsigned32
|
|
}
|
|
|
|
cdtTemplateAssociationName OBJECT-TYPE
|
|
SYNTAX DynamicTemplateName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name of the template associated with
|
|
the target."
|
|
::= { cdtTemplateAssociationEntry 1 }
|
|
|
|
cdtTemplateAssociationPrecedence OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the relative precedence of the
|
|
associated dynamic template. Lower values have higher
|
|
precedence than higher values."
|
|
::= { cdtTemplateAssociationEntry 2 }
|
|
|
|
|
|
|
|
cdtTemplateUsageTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CdtTemplateUsageEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of targets using each dynamic
|
|
template.
|
|
|
|
This table has an expansion dependent relationship on the
|
|
cdtTemplateTable, containing zero or more rows for each
|
|
dynamic template."
|
|
::= { cdtBase 4 }
|
|
|
|
cdtTemplateUsageEntry OBJECT-TYPE
|
|
SYNTAX CdtTemplateUsageEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry indicates a target using the dynamic template.
|
|
|
|
The system automatically creates an entry when it associates a
|
|
dynamic template to a target.
|
|
|
|
The system also creates an entry when it derives the
|
|
configuration that it applies to a target.
|
|
|
|
The system automatically destroys an entry under the following
|
|
circumstances:
|
|
|
|
1) The target indicated by the entry no longer exists.
|
|
|
|
2) The association between the target and the dynamic template
|
|
no longer exists."
|
|
INDEX {
|
|
cdtTemplateName,
|
|
cdtTemplateUsageTargetType,
|
|
cdtTemplateUsageTargetId
|
|
}
|
|
::= { cdtTemplateUsageTable 1 }
|
|
|
|
CdtTemplateUsageEntry ::= SEQUENCE {
|
|
cdtTemplateUsageTargetType DynamicTemplateTargetType,
|
|
cdtTemplateUsageTargetId DynamicTemplateTargetId
|
|
}
|
|
|
|
cdtTemplateUsageTargetType OBJECT-TYPE
|
|
SYNTAX DynamicTemplateTargetType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of target using the
|
|
dynamic template."
|
|
::= { cdtTemplateUsageEntry 1 }
|
|
|
|
cdtTemplateUsageTargetId OBJECT-TYPE
|
|
SYNTAX DynamicTemplateTargetId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name of the target using the dynamic
|
|
template"
|
|
::= { cdtTemplateUsageEntry 2 }
|
|
|
|
|
|
|
|
cdtTemplateCommonTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CdtTemplateCommonEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains attributes relating to all dynamic
|
|
templates. Observe that the type of dynamic templates
|
|
containing these attributes may change with the addition of new
|
|
dynamic template types.
|
|
|
|
This table has a sparse-dependent relationship on the
|
|
cdtTemplateTable, containing a row for each dynamic template
|
|
having a cdtTemplateType of one of the following values:
|
|
|
|
'derived'
|
|
'ppp'
|
|
'ethernet'
|
|
'ipSubscriber'
|
|
'service'"
|
|
::= { cdtBase 5 }
|
|
|
|
cdtTemplateCommonEntry OBJECT-TYPE
|
|
SYNTAX CdtTemplateCommonEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing attributes relating to any target.
|
|
|
|
The system automatically creates an entry when the system or the
|
|
EMS/NMS creates a row in the cdtTemplateTable with a
|
|
cdtTemplateType of on the following values:
|
|
|
|
'derived'
|
|
'ppp'
|
|
'ethernet'
|
|
'ipSubscriber'
|
|
'service'
|
|
|
|
Likewise, the system automatically destroys an entry when the
|
|
system or the EMS/NMS destroys the corresponding row in the
|
|
cdtTemplateTable."
|
|
INDEX { cdtTemplateName }
|
|
::= { cdtTemplateCommonTable 1 }
|
|
|
|
CdtTemplateCommonEntry ::= SEQUENCE {
|
|
cdtCommonValid BITS,
|
|
cdtCommonDescr SnmpAdminString,
|
|
cdtCommonKeepaliveInt Unsigned32,
|
|
cdtCommonKeepaliveRetries Unsigned32,
|
|
cdtCommonVrf CiscoVrfName,
|
|
cdtCommonAddrPool SnmpAdminString,
|
|
cdtCommonIpv4AccessGroup SnmpAdminString,
|
|
cdtCommonIpv4Unreachables TruthValue,
|
|
cdtCommonIpv6AccessGroup SnmpAdminString,
|
|
cdtCommonIpv6Unreachables TruthValue,
|
|
cdtCommonSrvSubControl CbpElementName,
|
|
cdtCommonSrvRedirect CbpElementName,
|
|
cdtCommonSrvAcct CbpElementName,
|
|
cdtCommonSrvQos CbpElementName,
|
|
cdtCommonSrvNetflow CbpElementName
|
|
}
|
|
|
|
cdtCommonValid OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
descr(0),
|
|
keepalive(1),
|
|
vrf(2),
|
|
addrPool(3),
|
|
ipv4AccessGroup(4),
|
|
ipv4Unreachables(5),
|
|
ipv6AccessGroup(6),
|
|
ipv6Unreachables(7),
|
|
srvSubControl(8),
|
|
srvRedirect(9),
|
|
srvAcct(10),
|
|
srvQos(11),
|
|
srvNetflow(12)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies which attributes in the dynamic template
|
|
have been configured to valid values.
|
|
|
|
Each bit in this bit string corresponds to a column in this
|
|
table. If the bit is '0', then the value of the corresponding
|
|
column is not valid. If the bit is '1', then the value of the
|
|
corresponding column has been configured to a valid value.
|
|
|
|
The following list specifies the mappings between bits and the
|
|
columns:
|
|
|
|
'descr' => cdtCommonDescr
|
|
'keepaliveInt' => cdtCommonKeepaliveInt
|
|
'keepaliveRetries' => cdtCommonKeepaliveRetries
|
|
'vrf' => cdtCommonVrf
|
|
'addrPool' => cdtCommonAddrPool
|
|
'ipv4AccessGroup' => cdtCommonIpv4AccessGroup
|
|
'ipv4Unreachables' => cdtCommonIpv4Unreachables
|
|
'ipv6AccessGroup' => cdtCommonIpv6AccessGroup
|
|
'ipv6Unreachables' => cdtCommonIpv6Unreachables
|
|
'srvSubControl' => cdtCommonSrvSubControl
|
|
'srvRedirect' => cdtCommonSrvRedirect
|
|
'srvAcct' => cdtCommonSrvAcct
|
|
'srvQos' => cdtCommonSrvQos
|
|
'srvNetflow' => cdtCommonSrvNetflow"
|
|
DEFVAL { { } }
|
|
::= { cdtTemplateCommonEntry 1 }
|
|
|
|
cdtCommonDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a human-readable description for the
|
|
dynamic template.
|
|
|
|
This column is valid only if the 'descr' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtTemplateCommonEntry 2 }
|
|
|
|
cdtCommonKeepaliveInt OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interval that the system sends
|
|
keepalive messages to a target.
|
|
|
|
This column is valid only if the 'keepaliveInterval' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { 10 }
|
|
::= { cdtTemplateCommonEntry 3 }
|
|
|
|
cdtCommonKeepaliveRetries OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
UNITS "retries"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of times the system will
|
|
resend a keepalive message without a response before it
|
|
transitions a target to an operationally down state.
|
|
|
|
This column is valid only if the 'keepaliveRetries' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { 5 }
|
|
::= { cdtTemplateCommonEntry 4 }
|
|
|
|
cdtCommonVrf OBJECT-TYPE
|
|
SYNTAX CiscoVrfName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the VRF with which a target
|
|
has an association.
|
|
|
|
This column is valid only if the 'vrf' bit of the corresponding
|
|
instance of cdtCommonValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtTemplateCommonEntry 5 }
|
|
|
|
cdtCommonAddrPool OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the IP address pool the
|
|
system will use to assign an IP address to a peer of a target.
|
|
|
|
This column is valid only if the 'addrPool' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtTemplateCommonEntry 6 }
|
|
|
|
cdtCommonIpv4AccessGroup OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name (or number) of the IPv4 ACL
|
|
applied to a target.
|
|
|
|
This column is valid only if the 'ipv4AccessGroup' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtTemplateCommonEntry 7 }
|
|
|
|
cdtCommonIpv4Unreachables OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether a target generates ICMPv4
|
|
unreachable messages.
|
|
|
|
This column is valid only if the 'ipv4Unreachables' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { true }
|
|
::= { cdtTemplateCommonEntry 8 }
|
|
|
|
cdtCommonIpv6AccessGroup OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name (or number) of the IPv4 ACL
|
|
applied to a target.
|
|
|
|
This column is valid only if the 'ipv6AccessGroup' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtTemplateCommonEntry 9 }
|
|
|
|
cdtCommonIpv6Unreachables OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether a target generates ICMPv6
|
|
unreachable messages.
|
|
|
|
This column is valid only if the 'ipv6Unreachables' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { true }
|
|
::= { cdtTemplateCommonEntry 10 }
|
|
|
|
cdtCommonSrvSubControl OBJECT-TYPE
|
|
SYNTAX CbpElementName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the subscriber control
|
|
policy applied to a target.
|
|
|
|
The system should assume that the cbpPolicyMapType (defined by
|
|
the CISCO-CBP-BASE-CFG-MIB) of the policy is
|
|
cbpPmtControlSubscriber (defined by the CISCO-CBP-TYPE-OID-MIB).
|
|
|
|
This column is valid only if the 'srvSubControl' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtTemplateCommonEntry 11 }
|
|
|
|
cdtCommonSrvRedirect OBJECT-TYPE
|
|
SYNTAX CbpElementName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the traffic redirect policy
|
|
applied to a target.
|
|
|
|
The system should assume that the cbpPolicyMapType (defined by
|
|
the CISCO-CBP-BASE-CFG-MIB) of the policy is
|
|
cbpPmtTrafficRedirect (defined by the CISCO-CBP-TYPE-OID-MIB).
|
|
|
|
This column is valid only if the 'srvRedirect' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtTemplateCommonEntry 12 }
|
|
|
|
cdtCommonSrvAcct OBJECT-TYPE
|
|
SYNTAX CbpElementName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the traffic accounting policy
|
|
applied to a target.
|
|
|
|
The system should assume that the cbpPolicyMapType (defined by
|
|
the CISCO-CBP-BASE-CFG-MIB) of the policy is
|
|
cbpPmtTrafficAccounting (defined by the CISCO-CBP-TYPE-OID-MIB).
|
|
|
|
This column is valid only if the 'srvAcct' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtTemplateCommonEntry 13 }
|
|
|
|
cdtCommonSrvQos OBJECT-TYPE
|
|
SYNTAX CbpElementName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the traffic QoS policy
|
|
applied to a target.
|
|
|
|
The system should assume that the cbpPolicyMapType (defined by
|
|
the CISCO-CBP-BASE-CFG-MIB) of the policy is cbpPmtQos (defined
|
|
by the CISCO-CBP-TYPE-OID-MIB).
|
|
|
|
This column is valid only if the 'srvQos' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtTemplateCommonEntry 14 }
|
|
|
|
cdtCommonSrvNetflow OBJECT-TYPE
|
|
SYNTAX CbpElementName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the NetFlow policy applied to
|
|
a target.
|
|
|
|
The system should assume that the cbpPolicyMapType (defined by
|
|
the CISCO-CBP-BASE-CFG-MIB) of the policy is
|
|
cbpPmtNetflow (defined by the CISCO-CBP-TYPE-OID-MIB).
|
|
|
|
This column is valid only if the 'srvNetflow' bit of the
|
|
corresponding instance of cdtCommonValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtTemplateCommonEntry 15 }
|
|
|
|
|
|
|
|
cdtIfTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CdtIfTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains attributes relating to interface
|
|
configuration.
|
|
|
|
This table has a sparse-dependent relationship on the
|
|
cdtTemplateTable, containing a row for each dynamic template
|
|
having a cdtTemplateType of one of the following values:
|
|
|
|
'derived'
|
|
'ppp'
|
|
'ethernet'
|
|
'ipSubscriber'"
|
|
::= { cdtCommonIf 1 }
|
|
|
|
cdtIfTemplateEntry OBJECT-TYPE
|
|
SYNTAX CdtIfTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing attributes relating to interface
|
|
configuration.
|
|
|
|
The system automatically creates an entry when the system or the
|
|
EMS/NMS creates a row in the cdtTemplateTable with a
|
|
cdtTemplateType of one of the following values:
|
|
|
|
'derived'
|
|
'ppp'
|
|
'ethernet'
|
|
'ipSubscriber'
|
|
|
|
Likewise, the system automatically destroys an entry when the
|
|
system or the EMS/NMS destroys the corresponding row in the
|
|
cdtTemplateTable."
|
|
INDEX { cdtTemplateName }
|
|
::= { cdtIfTemplateTable 1 }
|
|
|
|
CdtIfTemplateEntry ::= SEQUENCE {
|
|
cdtIfValid BITS,
|
|
cdtIfMtu Unsigned32,
|
|
cdtIfCdpEnable TruthValue,
|
|
cdtIfFlowMonitor SnmpAdminString,
|
|
cdtIfIpv4Unnumbered InterfaceIndexOrZero,
|
|
cdtIfIpv4SubEnable TruthValue,
|
|
cdtIfIpv4Mtu Unsigned32,
|
|
cdtIfIpv4TcpMssAdjust Unsigned32,
|
|
cdtIfIpv4VerifyUniRpf UnicastRpfType,
|
|
cdtIfIpv4VerifyUniRpfAcl SnmpAdminString,
|
|
cdtIfIpv4VerifyUniRpfOpts UnicastRpfOptions,
|
|
cdtIfIpv6Enable TruthValue,
|
|
cdtIfIpv6SubEnable TruthValue,
|
|
cdtIfIpv6TcpMssAdjust Unsigned32,
|
|
cdtIfIpv6VerifyUniRpf UnicastRpfType,
|
|
cdtIfIpv6VerifyUniRpfAcl SnmpAdminString,
|
|
cdtIfIpv6VerifyUniRpfOpts UnicastRpfOptions,
|
|
cdtIfIpv6NdPrefix InetAddressIPv6,
|
|
cdtIfIpv6NdPrefixLength InetAddressPrefixLength,
|
|
cdtIfIpv6NdValidLife Unsigned32,
|
|
cdtIfIpv6NdPreferredLife Unsigned32,
|
|
cdtIfIpv6NdOpts BITS,
|
|
cdtIfIpv6NdDadAttempts Unsigned32,
|
|
cdtIfIpv6NdNsInterval Unsigned32,
|
|
cdtIfIpv6NdReachableTime Unsigned32,
|
|
cdtIfIpv6NdRaIntervalUnits INTEGER,
|
|
cdtIfIpv6NdRaIntervalMax Unsigned32,
|
|
cdtIfIpv6NdRaIntervalMin Unsigned32,
|
|
cdtIfIpv6NdRaLife Unsigned32,
|
|
cdtIfIpv6NdRouterPreference INTEGER
|
|
}
|
|
|
|
cdtIfValid OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
mtu(0),
|
|
cdpEnable(1),
|
|
flowMonitor(2),
|
|
ipv4Unnumbered(3),
|
|
ipv4SubEnable(4),
|
|
ipv4Mtu(5),
|
|
ipv4TcpMssAdjust(6),
|
|
ipv4VerifyUniRpf(7),
|
|
ipv4VerifyUniRpfAcl(8),
|
|
ipv4VerifyUniRpfOpts(9),
|
|
ipv6Enable(10),
|
|
ipv6SubEnable(11),
|
|
ipv6TcpMssAdjust(12),
|
|
ipv6VerifyUniRpf(13),
|
|
ipv6VerifyUniRpfAcl(14),
|
|
ipv6VerifyUniRpfOpts(15),
|
|
ipv6NdPrefix(16),
|
|
ipv6NdValidLife(17),
|
|
ipv6NdPreferredLife(18),
|
|
ipv6NdOpts(19),
|
|
ipv6NdDadAttempts(20),
|
|
ipv6NdNsInterval(21),
|
|
ipv6NdReachableTime(22),
|
|
ipv6NdRaIntervalMax(23),
|
|
ipv6NdRaIntervalMin(24),
|
|
ipv6NdRaLife(25),
|
|
ipv6NdRaRouterPreference(26)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies which attributes in the dynamic template
|
|
have been configured to valid values.
|
|
|
|
Each bit in this bit string corresponds to a column in this
|
|
table. If the bit is '0', then the value of the corresponding
|
|
column is not valid. If the bit is '1', then the value of the
|
|
corresponding column has been configured to a valid value.
|
|
|
|
The following list specifies the mappings between bits and the
|
|
columns:
|
|
|
|
'mtu' => cdtIfMtu
|
|
'cdpEnable' => cdtIfCdpEnable
|
|
'flowMonitor' => cdtIfFlowMonitor
|
|
'ipv4Unnumbered' => cdtIfIpv4Unnumbered
|
|
'ipv4SubEnable' => cdtIfIpv4SubEnable
|
|
'ipv4Mtu' => cdtIfIpv4Mtu
|
|
'ipv4TcpMssAdjust' => cdtIfIpv4TcpMssAdjust
|
|
'ipv4VerifyUniRpf' => cdtIfIpv4VerifyUniRpf
|
|
'ipv4VerifyUniRpfAcl' => cdtIfIpv4VerifyUniRpfAcl
|
|
'ipv4VerifyUniRpfOpts' => cdtIfIpv4VerifyUniRpfOpts
|
|
'ipv6Enable' => cdtIfIpv6Enable
|
|
'ipv6SubEnable' => cdtIfIpv6SubEnable
|
|
'ipv6TcpMssAdjust' => cdtIfIpv6TcpMssAdjust
|
|
'ipv6VerifyUniRpf' => cdtIfIpv6VerifyUniRpf
|
|
'ipv6VerifyUniRpfAcl' => cdtIfIpv6VerifyUniRpfAcl
|
|
'ipv6VerifyUniRpfOpts' => cdtIfIpv6VerifyUniRpfOpts
|
|
'ipv6NdPrefix' => cdtIfIpv6NdPrefix,
|
|
cdtIfIpv6NdPrefixLength
|
|
'ipv6NdValidLife' => cdtIfIpv6NdValidLife
|
|
'ipv6NdPreferredLife' => cdtIfIpv6NdPreferredLife
|
|
'ipv6NdOpts' => cdtIfIpv6NdOpts
|
|
'ipv6NdDadAttempts' => cdtIfIpv6NdDadAttempts
|
|
'ipv6NdNsInterval' => cdtIfIpv6NdNsInterval
|
|
'ipv6NdReacableTime' => cdtIfIpv6NdReacableTime
|
|
'ipv6NdRaIntervalMax' => cdtIfIpv6NdRaIntervalUnits,
|
|
cdtIfIpv6NdRaIntervalMax
|
|
'ipv6NdRaIntervalMin' => cdtIfIpv6NdRaIntervalMin
|
|
'ipv6NdRaLife' => cdtIfIpv6NdRaLife
|
|
'ipv6NdRouterPreference'' => cdtIfIpv6NdRouterPreference"
|
|
DEFVAL { { } }
|
|
::= { cdtIfTemplateEntry 1 }
|
|
|
|
cdtIfMtu OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 64..65535)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Maximum Transfer Unit (MTU) size for
|
|
all packets sent on the target interface.
|
|
|
|
The value '0' cannot be written to an instance of this object.
|
|
However, it serves as a convenient value when the column is not
|
|
valid.
|
|
|
|
This column is valid only if the 'mtu' bit of the corresponding
|
|
instance of cdtIfValid is '1'."
|
|
DEFVAL { 0 }
|
|
::= { cdtIfTemplateEntry 2 }
|
|
|
|
cdtIfCdpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the target interface participates
|
|
in the Cisco Discovery Protocol (CDP).
|
|
|
|
This column is valid only if the 'cdpEnable' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { false }
|
|
::= { cdtIfTemplateEntry 3 }
|
|
|
|
cdtIfFlowMonitor OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the flow monitor associated
|
|
with the target interface.
|
|
|
|
This column is valid only if the 'flowMonitor' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtIfTemplateEntry 4 }
|
|
|
|
cdtIfIpv4Unnumbered OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interface of the source address that
|
|
the target interface uses when originating IPv4 packets.
|
|
|
|
The value '0' cannot be written to an instance of this object.
|
|
However, it serves as a convenient value when the column is
|
|
not valid (e.g., immediately following the creation of an
|
|
instance of the object).
|
|
|
|
This column is valid only if the 'ipv4Unnumbered' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { 0 }
|
|
::= { cdtIfTemplateEntry 5 }
|
|
|
|
cdtIfIpv4SubEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the target interface allows IPv4
|
|
subscriber sessions.
|
|
|
|
This column is valid only if the 'ipv4SubEnable' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { false }
|
|
::= { cdtIfTemplateEntry 6 }
|
|
|
|
cdtIfIpv4Mtu OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 128..65535)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Maximum Transfer Unit (MTU) size for
|
|
IPv4 packets sent on the target interface.
|
|
|
|
The value '0' cannot be written to an instance of this object.
|
|
However, it serves as a convenient value when the column is not
|
|
valid.
|
|
|
|
This column is valid only if the 'ipv4Mtu' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { 0 }
|
|
::= { cdtIfTemplateEntry 7 }
|
|
|
|
cdtIfIpv4TcpMssAdjust OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 500..1460)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the adjustment to the Maximum Segment
|
|
Size (MSS) of TCP SYN packets received by the target interface
|
|
contained in IPv4 datagrams.
|
|
|
|
The value '0' cannot be written to an instance of this object.
|
|
However, it serves as a convenient value when the column is not
|
|
valid.
|
|
|
|
This column is valid only if the 'ipv4TcpMssAdjust' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { 0 }
|
|
::= { cdtIfTemplateEntry 8 }
|
|
|
|
cdtIfIpv4VerifyUniRpf OBJECT-TYPE
|
|
SYNTAX UnicastRpfType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the type of unicast RPF the
|
|
system performs on IPv4 packets received by the target
|
|
interface.
|
|
|
|
This column is valid only if the 'ipv4VerifyUniRpf' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { disabled }
|
|
::= { cdtIfTemplateEntry 9 }
|
|
|
|
cdtIfIpv4VerifyUniRpfAcl OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name (or number) of the IPv4 ACL
|
|
used to determine whether the system should permit/deny packets
|
|
received by the target interface that fail unicast RPF
|
|
verification.
|
|
|
|
This column is valid only if the 'ipv4VerifyUniRpfAcl' bit of
|
|
the corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtIfTemplateEntry 10 }
|
|
|
|
cdtIfIpv4VerifyUniRpfOpts OBJECT-TYPE
|
|
SYNTAX UnicastRpfOptions
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the options that affect how the system
|
|
performs unicast RPF on IPv4 packets received by the target
|
|
interface.
|
|
|
|
This column is valid only if the 'ipv4VerifyUniRpfOpts' bit of
|
|
the corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { { } }
|
|
::= { cdtIfTemplateEntry 11 }
|
|
|
|
cdtIfIpv6Enable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the system processes IPv6
|
|
packets received by the target interface.
|
|
|
|
This column is valid only if the 'ipv6Enable' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { false }
|
|
::= { cdtIfTemplateEntry 12 }
|
|
|
|
cdtIfIpv6SubEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the target interface allows IPv6
|
|
subscriber sessions.
|
|
|
|
This column is valid only if the 'ipv6SubEnable' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { false }
|
|
::= { cdtIfTemplateEntry 13 }
|
|
|
|
cdtIfIpv6TcpMssAdjust OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 500..1460)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the adjustment to the Maximum Segment
|
|
Size (MSS) of TCP SYN packets received by the target interface
|
|
contained in IPv6 datagrams.
|
|
|
|
The value '0' cannot be written to an instance of this object.
|
|
However, it serves as a convenient value when the column is not
|
|
valid.
|
|
|
|
This column is valid only if the 'ipv6TcpMssAdjust' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { 0 }
|
|
::= { cdtIfTemplateEntry 14 }
|
|
|
|
cdtIfIpv6VerifyUniRpf OBJECT-TYPE
|
|
SYNTAX UnicastRpfType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the type of unicast RPF the
|
|
system performs on IPv6 packets received by the target
|
|
interface.
|
|
|
|
This column is valid only if the 'ipv6VerifyUniRpf' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { disabled }
|
|
::= { cdtIfTemplateEntry 15 }
|
|
|
|
cdtIfIpv6VerifyUniRpfAcl OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name (or number) of the IPv6 ACL
|
|
used to determine whether the system should permit/deny packets
|
|
received by the target interface that fail unicast RPF
|
|
verification.
|
|
|
|
This column is valid only if the 'ipv6VerifyUniRpfAcl' bit of
|
|
the corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtIfTemplateEntry 16 }
|
|
|
|
cdtIfIpv6VerifyUniRpfOpts OBJECT-TYPE
|
|
SYNTAX UnicastRpfOptions
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the options that affect how the system
|
|
performs unicast RPF on IPv6 packets received by the target
|
|
interface.
|
|
|
|
This column is valid only if the 'ipv6VerifyUniRpfOpts' bit of
|
|
the corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { { } }
|
|
::= { cdtIfTemplateEntry 17 }
|
|
|
|
cdtIfIpv6NdPrefix OBJECT-TYPE
|
|
SYNTAX InetAddressIPv6
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IPv6 network number included in
|
|
IPv6 router advertisements sent on the target interface.
|
|
|
|
This column is valid only if the 'ipv6NdPrefix' bit of
|
|
the corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { '00000000000000000000000000000000'H }
|
|
::= { cdtIfTemplateEntry 18 }
|
|
|
|
cdtIfIpv6NdPrefixLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the length of the IPv6 prefix specified
|
|
by the corresponding instance of cdtIpv6NdPrefix.
|
|
|
|
This column is valid only if the 'ipv6NdPrefix' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { 0 }
|
|
::= { cdtIfTemplateEntry 19 }
|
|
|
|
cdtIfIpv6NdValidLife OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interval that the system advertises
|
|
the IPv6 prefix (i.e., the corresponding instance of
|
|
cdtIfIpv6NdPrefix) as 'valid' for IPv6 router advertisements
|
|
sent on the target interface.
|
|
|
|
This column is valid only if the 'ipv6NdValidLife' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { 2592000 }
|
|
::= { cdtIfTemplateEntry 20 }
|
|
|
|
cdtIfIpv6NdPreferredLife OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interval that the system advertises
|
|
the IPv6 prefix (i.e., the corresponding instance of
|
|
cdtIfIpv6NdPrefix) as 'preferred' for IPv6 router advertisements
|
|
sent on the target interface.
|
|
|
|
This column is valid only if the 'ipv6NdPreferredLife' bit of
|
|
the corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { 604800 }
|
|
::= { cdtIfTemplateEntry 21 }
|
|
|
|
cdtIfIpv6NdOpts OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
advertise(0),
|
|
onlink(1),
|
|
router(2),
|
|
autoConfig(3),
|
|
advertisementInterval(4),
|
|
managedConfigFlag(5),
|
|
otherConfigFlag(6),
|
|
framedIpv6Prefix(7),
|
|
raSuppress(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies options that affect advertisements sent
|
|
on the target interface:
|
|
|
|
'advertise'
|
|
This option specifies that the system should advertise
|
|
the IPv6 prefix (i.e., the corresponding instance of
|
|
cdtIfIpv6NdPrefix).
|
|
|
|
'onlink'
|
|
This option specifies that the IPv6 prefix has been
|
|
assigned to a link. If set to '0', the system
|
|
advertises the IPv6 prefix as 'offlink'.
|
|
|
|
'router'
|
|
This option indicates that the router will send the full
|
|
router address and not set the 'R' bit in prefix
|
|
advertisements.
|
|
|
|
'autoConfig'
|
|
This option indicates to hosts on the local link that
|
|
the specified prefix supports IPv6 auto-configuration.
|
|
|
|
'advertisementInterval'
|
|
This option specifies the advertisement interval option
|
|
in router advertisements sent on the target interface.
|
|
|
|
'managedConfigFlag'
|
|
This option causes the system to set the 'managed
|
|
address configuration flag' in router advertisements
|
|
sent on the target interface.
|
|
|
|
'otherConfigFlag'
|
|
This option causes the system to set the 'other stateful
|
|
configuration' flag in router advertisements sent on the
|
|
target interface.
|
|
|
|
'frameIpv6Prefix'
|
|
This option causes the system to add the prefix in a
|
|
received RADIUS framed IPv6 prefix attribute to the
|
|
target interface's neighbor discovery prefix queue and
|
|
includes it in router advertisements sent on the target
|
|
interface.
|
|
|
|
'raSupress'
|
|
This option suppresses the transmission of router
|
|
advertisements on the target interface.
|
|
|
|
This column is valid only if the 'ipv6NdOpts' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { { advertise , onlink , router , autoConfig } }
|
|
::= { cdtIfTemplateEntry 22 }
|
|
|
|
cdtIfIpv6NdDadAttempts OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of consecutive neighbor
|
|
solitication messages the system sends on the target interface
|
|
while performing duplicate address detection on unicast IPv6
|
|
addresses on the target interface. The value '0' disables
|
|
duplicate address detection on the target interface.
|
|
|
|
This column is valid only if the 'ipv6NdDadAttempts' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { 1 }
|
|
::= { cdtIfTemplateEntry 23 }
|
|
|
|
cdtIfIpv6NdNsInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1000..3600000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interval between neighbor
|
|
solicitation retransmissions on the target interface.
|
|
|
|
This column is valid only if the 'ipv6NdNsIntervals' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { 1000 }
|
|
::= { cdtIfTemplateEntry 24 }
|
|
|
|
cdtIfIpv6NdReachableTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the amount of time the system considers
|
|
a neighbor of the target interface reachable after a
|
|
reachability confirmation event has occurred. The value '0'
|
|
disables neighbor reachability detection on the target
|
|
interface.
|
|
|
|
This column is valid only if the 'ipv6NdReachable' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { 0 }
|
|
::= { cdtIfTemplateEntry 25 }
|
|
|
|
cdtIfIpv6NdRaIntervalUnits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
seconds(1),
|
|
milliseconds(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the units of time for the corresponding
|
|
instances of cdtIfIpv6NdRaIntervalMin and
|
|
cdtIfIpv6NdRaIntervalMax.
|
|
|
|
This column is valid only if the 'ipv6NdRaInterval' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
DEFVAL { seconds }
|
|
::= { cdtIfTemplateEntry 26 }
|
|
|
|
cdtIfIpv6NdRaIntervalMax OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the maximum interval between IPv6 router
|
|
advertisements sent on the target interface.
|
|
|
|
The value '0' cannot be written to an instance of this object.
|
|
However, it serves as a convenient value when the column is not
|
|
valid.
|
|
|
|
This column is valid only if the 'ipv6NdRaInterval' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { 0 }
|
|
::= { cdtIfTemplateEntry 27 }
|
|
|
|
cdtIfIpv6NdRaIntervalMin OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum interval between IPv6 router
|
|
advertisements sent on the target interface. The value of this
|
|
column has the following restrictions:
|
|
|
|
1) This value cannot be less than 75% of the value specified
|
|
for cdtIfIpv6NdRaIntervalMax.
|
|
|
|
2) If the corresponding instance of cdtIfIpv6NdRaIntervalUnits
|
|
is 'seconds', then this value cannot be less than '3'.
|
|
|
|
3) If the corresponding instance of cdtIfIpv6NdRaIntervalUnits
|
|
is 'milliseconds', then this value cannot be less than '30'.
|
|
|
|
If the target interface template does not specify this value,
|
|
then the system automatically assumes a minimum interval that is
|
|
75% of the corresponding instance of cdtIfIpv6NdRaIntervalMax.
|
|
|
|
The value '0' cannot be written to an instance of this object.
|
|
However, it serves as a convenient value when the column is not
|
|
valid.
|
|
|
|
This column is valid only if the 'ipv6NdRaInterval' bit of the
|
|
corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { 0 }
|
|
::= { cdtIfTemplateEntry 28 }
|
|
|
|
cdtIfIpv6NdRaLife OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the router lifetime value in IPv6 router
|
|
advertisements sent on the target interface. The value '0'
|
|
specifies that neighbors should not consider the router as a
|
|
default router."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { 1800 }
|
|
::= { cdtIfTemplateEntry 29 }
|
|
|
|
cdtIfIpv6NdRouterPreference OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
high(1),
|
|
medium(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Default Router Preference (DRP) for
|
|
the router on the target interface.
|
|
|
|
This column is valid only if the 'ipv6NdRouterPreference' bit of
|
|
the corresponding instance of cdtIfValid is '1'."
|
|
REFERENCE
|
|
"T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor
|
|
Discovery for IP version 6 (IPv6)', RFC-4861, September 2007."
|
|
DEFVAL { medium }
|
|
::= { cdtIfTemplateEntry 30 }
|
|
|
|
|
|
|
|
cdtPppTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CdtPppTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains attributes relating to PPP connection
|
|
configuration.
|
|
|
|
This table has a sparse-dependent relationship on the
|
|
cdtTemplateTable, containing a row for each dynamic template
|
|
having a cdtTemplateType of one of the following values:
|
|
|
|
'derived'
|
|
'ppp'"
|
|
::= { cdtPpp 1 }
|
|
|
|
cdtPppTemplateEntry OBJECT-TYPE
|
|
SYNTAX CdtPppTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing attributes relating to PPP connection
|
|
configuration.
|
|
|
|
The system automatically creates an entry when the system or the
|
|
EMS/NMS creates a row in the cdtTemplateTable with a
|
|
cdtTemplateType of one of the following values:
|
|
|
|
'derived'
|
|
'ppp'
|
|
|
|
Likewise, the system automatically destroys an entry when the
|
|
system or the EMS/NMS destroys the corresponding row in the
|
|
cdtTemplateTable."
|
|
INDEX { cdtTemplateName }
|
|
::= { cdtPppTemplateTable 1 }
|
|
|
|
CdtPppTemplateEntry ::= SEQUENCE {
|
|
cdtPppValid BITS,
|
|
cdtPppAccounting TruthValue,
|
|
cdtPppAuthentication BITS,
|
|
cdtPppAuthenticationMethods SnmpAdminString,
|
|
cdtPppAuthorization TruthValue,
|
|
cdtPppLoopbackIgnore TruthValue,
|
|
cdtPppMaxBadAuth Unsigned32,
|
|
cdtPppMaxConfigure Unsigned32,
|
|
cdtPppMaxFailure Unsigned32,
|
|
cdtPppMaxTerminate Unsigned32,
|
|
cdtPppTimeoutAuthentication Unsigned32,
|
|
cdtPppTimeoutRetry Unsigned32,
|
|
cdtPppChapOpts BITS,
|
|
cdtPppChapHostname SnmpAdminString,
|
|
cdtPppChapPassword SnmpAdminString,
|
|
cdtPppMsChapV1Opts BITS,
|
|
cdtPppMsChapV1Hostname SnmpAdminString,
|
|
cdtPppMsChapV1Password SnmpAdminString,
|
|
cdtPppMsChapV2Opts BITS,
|
|
cdtPppMsChapV2Hostname SnmpAdminString,
|
|
cdtPppMsChapV2Password SnmpAdminString,
|
|
cdtPppPapOpts BITS,
|
|
cdtPppPapUsername SnmpAdminString,
|
|
cdtPppPapPassword SnmpAdminString,
|
|
cdtPppEapOpts BITS,
|
|
cdtPppEapIdentity SnmpAdminString,
|
|
cdtPppEapPassword SnmpAdminString,
|
|
cdtPppIpcpAddrOption INTEGER,
|
|
cdtPppIpcpDnsOption INTEGER,
|
|
cdtPppIpcpDnsPrimary InetAddressIPv4,
|
|
cdtPppIpcpDnsSecondary InetAddressIPv4,
|
|
cdtPppIpcpWinsOption INTEGER,
|
|
cdtPppIpcpWinsPrimary InetAddressIPv4,
|
|
cdtPppIpcpWinsSecondary InetAddressIPv4,
|
|
cdtPppIpcpMaskOption INTEGER,
|
|
cdtPppIpcpMask InetAddressIPv4,
|
|
cdtPppPeerDefIpAddrOpts BITS,
|
|
cdtPppPeerDefIpAddrSrc INTEGER,
|
|
cdtPppPeerDefIpAddr InetAddressIPv4
|
|
}
|
|
|
|
cdtPppValid OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
valid(0),
|
|
accounting(1),
|
|
authentication(2),
|
|
autthenticationMethods(3),
|
|
authorization(4),
|
|
loopbackIgnore(5),
|
|
maxBadAuth(6),
|
|
maxConfigure(7),
|
|
maxFailure(8),
|
|
maxTerminate(9),
|
|
timeoutAuthentication(10),
|
|
timeoutRetry(11),
|
|
chapOpts(12),
|
|
chapHostname(13),
|
|
chapPassword(14),
|
|
msChapV1Opts(15),
|
|
msChapV1Hostname(16),
|
|
msChapV1Password(17),
|
|
msChapV2Opts(18),
|
|
msChapV2Hostname(19),
|
|
msChapV2Password(20),
|
|
papOpts(21),
|
|
papUsername(22),
|
|
papPassword(23),
|
|
eapOpts(24),
|
|
eapIdentity(25),
|
|
eapPassword(26),
|
|
ipcpAddrOption(27),
|
|
ipcpDnsOption(28),
|
|
ipcpDnsPrimary(29),
|
|
ipcpDnsSecondary(30),
|
|
ipcpWinsOption(31),
|
|
ipcpWinsPrimary(32),
|
|
ipcpWinsSecondary(33),
|
|
ipcpMaskOption(34),
|
|
ipcpMask(35),
|
|
peerDefIpAddrOpts(36),
|
|
peerDefIpAddrSrc(37),
|
|
peerDefIpAddr(38)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies which attributes in the dynamic template
|
|
have been configured to valid values.
|
|
|
|
Each bit in this bit string corresponds to a column in this
|
|
table. If the bit is '0', then the value of the corresponding
|
|
column is not valid. If the bit is '1', then the value of the
|
|
corresponding column has been configured to a valid value.
|
|
|
|
The following list specifies the mappings between bits and the
|
|
columns:
|
|
|
|
accounting => cdtPppAccounting
|
|
authentication => cdtPppAuthentication
|
|
authenticationMethods => cdtPppAuthenticationMethods
|
|
authorization => cdtPppAuthorization
|
|
loopbackIgnore => cdtPppLoopbackIgnore
|
|
maxBadAuth => cdtPppMaxBadAuth
|
|
maxConfigure => cdtPppMaxConfigure
|
|
maxFailure => cdtPppMaxFailure
|
|
maxTerminate => cdtPppMaxTerminate
|
|
timeoutAuthentication => cdtPppTimeoutAuthentication
|
|
timeoutRetry => cdtPppTimeoutRetry
|
|
chapOpts => cdtPppChapOpts
|
|
chapHostname => cdtPppChapHostname
|
|
chapPassword => cdtPppChapPassword
|
|
msChapV1Opts => cdtPppMsChapV1Opts
|
|
msChapV1Hostname => cdtPppMsChapV1Hostname
|
|
msChapV1Password => cdtPppMsChapV1Password
|
|
msChapV2Opts => cdtPppMsChapV2Opts
|
|
msChapV2Hostname => cdtPppMsChapV2Hostname
|
|
msChapV2Password => cdtPppMsChapV2Password
|
|
papOpts => cdtPppPapOpts
|
|
papSentUsername => cdtPppPapUsername
|
|
papSentPassword => cdtPppPapPassword
|
|
eapOpts => cdtPppEapOpts
|
|
eapIdentity => cdtPppEapIdentity
|
|
eapPassword => cdtPppEapPassword
|
|
ipcpAddrOption => cdtPppIpcpAddrOption
|
|
ipcpDnsOption => cdtPppIpcpDnsOption
|
|
ipcpDnsPrimary => cdtPppIpcpDnsPrimary
|
|
ipcpDnsSecondary => cdtPppIpcpDnsSecondary
|
|
ipcpWinsOption => cdtPppIpcpWinsOption
|
|
ipcpWinsPrimary => cdtPppIpcpWinsPrimary
|
|
ipcpWinsSecondary => cdtPppIpcpWinsSecondary
|
|
ipcpMaskOption => cdtPppIpcpMaskOption
|
|
ipcpMask => cdtPppIpcpMask
|
|
peerDefIpAddrOpts => cdtPppPeerOpts
|
|
peerDefIpAddrSrc => cdtPppPeerDefIpAddrSrc
|
|
peerDefIpAddr => cdtPppPeerDefIpAddr"
|
|
DEFVAL { { } }
|
|
::= { cdtPppTemplateEntry 1 }
|
|
|
|
cdtPppAccounting OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the system applies accounting
|
|
services to the target PPP connection.
|
|
|
|
This column is valid only if the 'accounting' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
DEFVAL { false }
|
|
::= { cdtPppTemplateEntry 2 }
|
|
|
|
cdtPppAuthentication OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
chap(0),
|
|
msChap(1),
|
|
msChapV2(2),
|
|
pap(3),
|
|
eap(4),
|
|
optional(5),
|
|
callin(6),
|
|
oneTime(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies authentication services applied to a
|
|
target PPP connection and other options affecting authentication
|
|
services:
|
|
|
|
'chap'
|
|
This option enables the Challenge Handshake Protocol (CHAP)
|
|
on a target PPP connection.
|
|
|
|
'msChap'
|
|
This option enables Microsoft's CHAP on a target PPP
|
|
connection.
|
|
|
|
'msChapV2'
|
|
This option enables version 2 of Microsoft's CHAP on a
|
|
target PPP connection.
|
|
|
|
'pap'
|
|
This option enables Password Authentication Protocol (PAP)
|
|
on a target PPP connection.
|
|
|
|
'eap'
|
|
This option enables Extensible Authentication Protocol (EAP)
|
|
on a target PPP connection.
|
|
|
|
'optional'
|
|
This option specifies that the system accepts the connection
|
|
even if the peer of a target PPP connection refuses to
|
|
accept the authentication methods the system has
|
|
requested.
|
|
|
|
'callin'
|
|
This option specifies that authentication should only happen
|
|
for incoming calls.
|
|
|
|
'oneTime'
|
|
This option specifies that the system accepts the username
|
|
and password in the username field of authentication
|
|
responses received on a target PPP connection.
|
|
|
|
This column is valid only if the 'authentication' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
DEFVAL { { } }
|
|
::= { cdtPppTemplateEntry 3 }
|
|
|
|
cdtPppAuthenticationMethods OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of a list of authentication
|
|
methods used on a target PPP connection. If the template does
|
|
not include this attribute, then the system uses the default
|
|
method list.
|
|
|
|
This column is valid only if the 'authentication' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 4 }
|
|
|
|
cdtPppAuthorization OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the system applies authorization
|
|
services to a target PPP connection.
|
|
|
|
This column is valid only if the 'authorization' bit of the
|
|
corresponding instance of cditPppValid is '1'."
|
|
DEFVAL { false }
|
|
::= { cdtPppTemplateEntry 5 }
|
|
|
|
cdtPppLoopbackIgnore OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the system ignores loopback on
|
|
a target PPP connection. When the system ignores loopback,
|
|
loopback detection is disabled.
|
|
|
|
This column is valid only if the 'loopbackIgnore' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"W. Simpson, 'The Point-to-Point Protocol (PPP)', RFC-1661,
|
|
July 1994."
|
|
DEFVAL { false }
|
|
::= { cdtPppTemplateEntry 6 }
|
|
|
|
cdtPppMaxBadAuth OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of authentication failures
|
|
allowed by the system before a target PPP connection is reset.
|
|
|
|
The value '0' cannot be written to an instance of this object.
|
|
However, it serves as a convenient value when the column is not
|
|
valid.
|
|
|
|
This column is valid only if the 'maxBadAuth' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
DEFVAL { 0 }
|
|
::= { cdtPppTemplateEntry 7 }
|
|
|
|
cdtPppMaxConfigure OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of unacknowledged
|
|
Configure-Request messages a target PPP connection can send
|
|
before the system abandons LCP or NCP negotiations.
|
|
|
|
This column is valid only if the 'maxConfigure' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"W. Simpson, 'The Point-to-Point Protocol (PPP)', RFC-1661,
|
|
July 1994."
|
|
DEFVAL { 10 }
|
|
::= { cdtPppTemplateEntry 8 }
|
|
|
|
cdtPppMaxFailure OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of Configure-Nak messages a
|
|
target PPP connection can receive before the system abandons LCP
|
|
or NCP negotiations.
|
|
|
|
This column is valid only if the 'maxFailure' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"W. Simpson, 'The Point-to-Point Protocol (PPP)', RFC-1661,
|
|
July 1994."
|
|
DEFVAL { 5 }
|
|
::= { cdtPppTemplateEntry 9 }
|
|
|
|
cdtPppMaxTerminate OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of unacknowledged
|
|
Terminate-Request messages a target PPP connection can send
|
|
before the system abandons LCP or NCP negotiations.
|
|
|
|
This column is valid only if the 'maxTerminate' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"W. Simpson, 'The Point-to-Point Protocol (PPP)', RFC-1661,
|
|
July 1994."
|
|
DEFVAL { 2 }
|
|
::= { cdtPppTemplateEntry 10 }
|
|
|
|
cdtPppTimeoutAuthentication OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects specifies the maximum time the system will wait
|
|
for a response to an authentication request on a target PPP
|
|
connection.
|
|
|
|
This column is valid only if the 'timeoutAuthentication' bit of
|
|
the corresponding instance of cdtPppValid is '1'."
|
|
DEFVAL { 10 }
|
|
::= { cdtPppTemplateEntry 11 }
|
|
|
|
cdtPppTimeoutRetry OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects specifies the maximum time the system will wait
|
|
for a response to a PPP control packets on a target PPP
|
|
connection.
|
|
|
|
This column is valid only if the 'timeoutRetry' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"W. Simpson, 'The Point-to-Point Protocol (PPP)', RFC-1661,
|
|
July 1994."
|
|
DEFVAL { 3 }
|
|
::= { cdtPppTemplateEntry 12 }
|
|
|
|
cdtPppChapOpts OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
refuse(0),
|
|
callin(1),
|
|
wait(2),
|
|
encrypted(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies how the system processes the CHAP on a
|
|
target PPP connection:
|
|
|
|
'refuse'
|
|
This option specifies that the system should refuse CHAP
|
|
requests from peers of a target PPP connection.
|
|
|
|
'callin'
|
|
This option specifies that the system should only refuse
|
|
CHAP requests for incoming calls on a target PPP
|
|
connection. This option is only relevant if the
|
|
'refuse' option is set to '1'.
|
|
|
|
'wait'
|
|
This option delays CHAP authentication until after the
|
|
peer of a target PPP connection has authenticated itself
|
|
to the system.
|
|
|
|
'encrypted'
|
|
This option specifies that the value specified by the
|
|
corresponding instance of cdtPppChapPassword is already
|
|
encrypted.
|
|
|
|
This column is valid only if the 'chapOpts' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"W. Simpson, 'PPP Challenge Handshake Authentication Protocol
|
|
(CHAP)', RFC-1994, August 1996."
|
|
DEFVAL { { wait } }
|
|
::= { cdtPppTemplateEntry 13 }
|
|
|
|
cdtPppChapHostname OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the hostname sent in a CHAP response
|
|
on a target PPP connection. If the template does not include
|
|
this attribute, then the system uses its assigned hostname.
|
|
|
|
This column is valid only if the 'chapHostname' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"W. Simpson, 'PPP Challenge Handshake Authentication Protocol
|
|
(CHAP)', RFC-1994, August 1996."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 14 }
|
|
|
|
cdtPppChapPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the password used to construct a CHAP
|
|
response on the target PPP connection.
|
|
|
|
This column is valid only if the 'chapPassword' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"W. Simpson, 'PPP Challenge Handshake Authentication Protocol
|
|
(CHAP)', RFC-1994, August 1996."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 15 }
|
|
|
|
cdtPppMsChapV1Opts OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
refuse(0),
|
|
callin(1),
|
|
wait(2),
|
|
encrypted(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies how the system processes version 1 of
|
|
Microsoft CHAP on a target PPP connection:
|
|
|
|
'refuse'
|
|
This option specifies that the system should refuse
|
|
Microsoft CHAP (v1) requests from peers of a target PPP
|
|
connection.
|
|
|
|
'callin'
|
|
This option specifies that the system should only refuse
|
|
Microsoft CHAP (v1) requests for incoming calls on a
|
|
target PPP connection. This option is only relevant if
|
|
the 'refuse' option is set to '1'.
|
|
|
|
'wait'
|
|
This option delays Microsoft CHAP (v1) authentication
|
|
until after the peer of a target PPP connection has
|
|
authenticated itself to the system.
|
|
|
|
'encrypted'
|
|
This option specifies that the value specified by the
|
|
corresponding instance of cdtPppMsChapV1Password is
|
|
already encrypted.
|
|
|
|
This column is valid only if the 'msChapV1Opts' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. Zorn, S. Cobb, 'Microsoft PPP CHAP Extensions', RFC-2433,
|
|
October 1998."
|
|
DEFVAL { { wait } }
|
|
::= { cdtPppTemplateEntry 16 }
|
|
|
|
cdtPppMsChapV1Hostname OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the hostname sent in a Microsoft CHAP
|
|
(v1) response on a target PPP connection. If the template does
|
|
not include this attribute, then the system uses its assigned
|
|
hostname.
|
|
|
|
This column is valid only if the 'msChapV1Hostname' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. Zorn, S. Cobb, 'Microsoft PPP CHAP Extensions', RFC-2433,
|
|
October 1998."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 17 }
|
|
|
|
cdtPppMsChapV1Password OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the password used to construct a
|
|
Microsoft CHAP (v1) response on a target PPP connection.
|
|
|
|
This column is valid only if the 'msChapV1Password' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. Zorn, S. Cobb, 'Microsoft PPP CHAP Extensions', RFC-2433,
|
|
October 1998."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 18 }
|
|
|
|
cdtPppMsChapV2Opts OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
refuse(0),
|
|
callin(1),
|
|
wait(2),
|
|
encrypted(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies how the system processes version 2 of
|
|
Microsoft CHAP on a target PPP connection:
|
|
|
|
'refuse'
|
|
This option specifies that the system should refuse
|
|
Microsoft CHAP (v2) requests from peers of a target PPP
|
|
connection.
|
|
|
|
'callin'
|
|
This option specifies that the system should only refuse
|
|
Microsoft CHAP (v2) requests for incoming calls on a
|
|
target PPP connection. This option is only relevant if
|
|
the 'refuse' option is set to '1'.
|
|
|
|
'wait'
|
|
This option delays Microsoft CHAP (v2) authentication
|
|
until after the peer of a target PPP connection has
|
|
authenticated itself to the system.
|
|
|
|
'encrypted'
|
|
This option specifies that the value specified by the
|
|
corresponding instance of cdtPppMsChapV2Password is
|
|
already encrypted.
|
|
|
|
This column is valid only if the 'msChapV2Opts' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. Zorn, 'Microsoft PPP CHAP Extensions, Version 2', RFC-2759,
|
|
January 2000."
|
|
DEFVAL { { wait } }
|
|
::= { cdtPppTemplateEntry 19 }
|
|
|
|
cdtPppMsChapV2Hostname OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the hostname sent in a Microsoft CHAP
|
|
(v2) response on a target PPP connection. If the template does
|
|
not include this attribute, then the system uses its assigned
|
|
hostname.
|
|
|
|
This column is valid only if the 'msChapV2Hostname' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. Zorn, 'Microsoft PPP CHAP Extensions, Version 2', RFC-2759,
|
|
January 2000."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 20 }
|
|
|
|
cdtPppMsChapV2Password OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the password used to construct a
|
|
Microsoft CHAP (v2) response on a target PPP connection.
|
|
|
|
This column is valid only if the 'msChapV2Password' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. Zorn, 'Microsoft PPP CHAP Extensions, Version 2', RFC-2759,
|
|
January 2000."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 21 }
|
|
|
|
cdtPppPapOpts OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
refuse(0),
|
|
encrypted(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies how the system processes the PAP on a
|
|
target PPP connection:
|
|
|
|
'refuse'
|
|
This option specifies that the system should refuse PAP
|
|
requests from peers of a target PPP connection.
|
|
|
|
'encrypted'
|
|
This option specifies that the value specified by the
|
|
corresponding instance of cdtPppPapSentPassword is
|
|
already encrypted.
|
|
|
|
This column is valid only if the 'papOpts' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"B. Lloyd and W. Simpson, 'PPP Authentication Protocols',
|
|
RFC-1334, October 1992."
|
|
DEFVAL { { } }
|
|
::= { cdtPppTemplateEntry 22 }
|
|
|
|
cdtPppPapUsername OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the username sent in a PAP response on
|
|
a target PPP connection.
|
|
|
|
This column is valid only if the 'papUsername' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"B. Lloyd and W. Simpson, 'PPP Authentication Protocols',
|
|
RFC-1334, October 1992."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 23 }
|
|
|
|
cdtPppPapPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the username used to construct a PAP
|
|
response on a target PPP connection.
|
|
|
|
This column is valid only if the 'papPassword' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"B. Lloyd and W. Simpson, 'PPP Authentication Protocols',
|
|
RFC-1334, October 1992."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 24 }
|
|
|
|
cdtPppEapOpts OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
refuse(0),
|
|
callin(1),
|
|
wait(2),
|
|
local(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies how the system processes the EAP on a
|
|
target PPP connection:
|
|
|
|
'refuse'
|
|
This option specifies that the system should refuse EAP
|
|
requests from peers of a target PPP connection.
|
|
|
|
'callin'
|
|
This option specifies that the system should only refuse EAP
|
|
requests for incoming calls on a target PPP connection.
|
|
This option is only relevant if the 'refuse' option is
|
|
set to '1'.
|
|
|
|
'wait'
|
|
This option delays EAP authentication until after the
|
|
peer of a target PPP connection has authenticated itself
|
|
to the system.
|
|
|
|
'local'
|
|
This option specifies that the system should locally
|
|
authenticate the peer of a target PPP connection,
|
|
rather than acting as a proxy to an external AAA server.
|
|
|
|
This column is valid only if the 'eapOpts' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"B. Aboba, L. Blunk, J. Vollbrecht, J. Carlson, and H.
|
|
Levkowetz, 'Extensible Authentication Protocol (EAP)',
|
|
RFC-3748, June 2004."
|
|
DEFVAL { { } }
|
|
::= { cdtPppTemplateEntry 25 }
|
|
|
|
cdtPppEapIdentity OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the identity sent in an EAP response on
|
|
a target PPP connection.
|
|
|
|
This column is valid only if the 'eapIdentity' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"B. Aboba, L. Blunk, J. Vollbrecht, J. Carlson, and H.
|
|
Levkowetz, 'Extensible Authentication Protocol (EAP)',
|
|
RFC-3748, June 2004."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 26 }
|
|
|
|
cdtPppEapPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the password used to construct an EAP
|
|
response on a target PPP connection.
|
|
|
|
This column is valid only if the 'eapPassword' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"B. Aboba, L. Blunk, J. Vollbrecht, J. Carlson, and H.
|
|
Levkowetz, 'Extensible Authentication Protocol (EAP)',
|
|
RFC-3748, June 2004."
|
|
DEFVAL { "" }
|
|
::= { cdtPppTemplateEntry 27 }
|
|
|
|
cdtPppIpcpAddrOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
accept(2),
|
|
required(3),
|
|
unique(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IPCP address option for a target PPP
|
|
connection:
|
|
|
|
'other'
|
|
The implementation of this MIB module does not recognize
|
|
the configured IPCP address option.
|
|
|
|
'accept'
|
|
The system accepts any non-zero IP address from the peer
|
|
of a target PPP connection.
|
|
|
|
'required'
|
|
The system disconnects the peer of a target PPP
|
|
connection if it could not negotiate an IP address.
|
|
|
|
'unique'
|
|
The system disconnects the peer of a target PPP
|
|
connection if the IP address is already in use.
|
|
|
|
This column is valid only if the 'ipcpAddrOption' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. McGregor, 'The PPP Internet Protocol Control Protocol
|
|
(IPCP)', RFC-1332, May 1992."
|
|
DEFVAL { other }
|
|
::= { cdtPppTemplateEntry 28 }
|
|
|
|
cdtPppIpcpDnsOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
accept(2),
|
|
request(3),
|
|
reject(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IPCP DNS option for the dynamic
|
|
interface:
|
|
|
|
'other'
|
|
The implementation of this MIB module does not recognize
|
|
the configured DNS option.
|
|
|
|
'accept'
|
|
The system accepts any non-zero DNS address form the
|
|
peer of a target PPP connection.
|
|
|
|
'request'
|
|
The system requests the DNS address from the peer of a
|
|
target PPP connection.
|
|
|
|
'reject'
|
|
The system rejects the DNS option from the peer of a
|
|
target PPP connection.
|
|
|
|
This column is valid only if the 'ipcpDnsOption' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. McGregor, 'The PPP Internet Protocol Control Protocol
|
|
(IPCP)', RFC-1332, May 1992."
|
|
DEFVAL { other }
|
|
::= { cdtPppTemplateEntry 29 }
|
|
|
|
cdtPppIpcpDnsPrimary OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address of the primary DNS server
|
|
offered to the peer of a target PPP connection.
|
|
|
|
This column is valid only if the 'ipcpDnsPrimary' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. McGregor, 'The PPP Internet Protocol Control Protocol
|
|
(IPCP)', RFC-1332, May 1992."
|
|
DEFVAL { '00000000'H }
|
|
::= { cdtPppTemplateEntry 30 }
|
|
|
|
cdtPppIpcpDnsSecondary OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address of the secondary DNS
|
|
server offered to the peer of a target PPP connection.
|
|
|
|
This column is valid only if the 'ipcpDnsSecondary' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. McGregor, 'The PPP Internet Protocol Control Protocol
|
|
(IPCP)', RFC-1332, May 1992."
|
|
DEFVAL { '00000000'H }
|
|
::= { cdtPppTemplateEntry 31 }
|
|
|
|
cdtPppIpcpWinsOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
accept(2),
|
|
request(3),
|
|
reject(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IPCP WINS option for a target PPP
|
|
connection:
|
|
|
|
'other'
|
|
The implementation of this MIB module does not recognize
|
|
the configured WINS option.
|
|
|
|
'accept'
|
|
The system accepts any non-zero WINS address from the
|
|
peer of a target PPP connection.
|
|
|
|
'request'
|
|
The system requests the WINS address from the peer of
|
|
a target PPP connection.
|
|
|
|
'reject'
|
|
The system rejects the WINS option from the peer of a
|
|
target PPP connection.
|
|
|
|
This column is valid only if the 'ipcpWinsOption' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. McGregor, 'The PPP Internet Protocol Control Protocol
|
|
(IPCP)', RFC-1332, May 1992."
|
|
DEFVAL { other }
|
|
::= { cdtPppTemplateEntry 32 }
|
|
|
|
cdtPppIpcpWinsPrimary OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address of the primary WINS server
|
|
offered to the peer of a target PPP connection.
|
|
|
|
This column is valid only if the 'ipcpWinsPrimary' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. McGregor, 'The PPP Internet Protocol Control Protocol
|
|
(IPCP)', RFC-1332, May 1992."
|
|
DEFVAL { '00000000'H }
|
|
::= { cdtPppTemplateEntry 33 }
|
|
|
|
cdtPppIpcpWinsSecondary OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address of the secondary WINS
|
|
server offered to the peer of a target PPP connection.
|
|
|
|
This column is valid only if the 'ipcpWinsSecondary' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. McGregor, 'The PPP Internet Protocol Control Protocol
|
|
(IPCP)', RFC-1332, May 1992."
|
|
DEFVAL { '00000000'H }
|
|
::= { cdtPppTemplateEntry 34 }
|
|
|
|
cdtPppIpcpMaskOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
request(2),
|
|
reject(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IPCP IP subnet mask option for a
|
|
target PPP connection:
|
|
|
|
'other'
|
|
The implementation of this MIB module does not recognize
|
|
the configured IP subnet mask option.
|
|
|
|
'request'
|
|
The system requests the IP subnet mask from the peer of
|
|
a target PPP connection.
|
|
|
|
'reject'
|
|
The system rejects the IP subnet mask option from the
|
|
peer of a target PPP connection.
|
|
|
|
This column is valid only if the 'ipcpMaskOption' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. McGregor, 'The PPP Internet Protocol Control Protocol
|
|
(IPCP)', RFC-1332, May 1992."
|
|
DEFVAL { other }
|
|
::= { cdtPppTemplateEntry 35 }
|
|
|
|
cdtPppIpcpMask OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address mask offered to the peer
|
|
of a target PPP connection.
|
|
|
|
This column is valid only if the 'ipcpMask' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
REFERENCE
|
|
"G. McGregor, 'The PPP Internet Protocol Control Protocol
|
|
(IPCP)', RFC-1332, May 1992."
|
|
DEFVAL { '00000000'H }
|
|
::= { cdtPppTemplateEntry 36 }
|
|
|
|
cdtPppPeerDefIpAddrOpts OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
ipAddrForced(0),
|
|
matchAaaPools(1),
|
|
staticPool(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies options that affect how the system
|
|
assigns an IP address to the peer of a target PPP connection:
|
|
|
|
'ipAddrForced'
|
|
This option forces the system to assign the next
|
|
available IP address in the pool to the peer of a
|
|
target PPP connection. When disabled, the peer may
|
|
negotiate a specific IP address or the system can assign
|
|
the peer its previously assigned IP address.
|
|
|
|
'matchAaaPools'
|
|
This option specifies that the names of the IP address
|
|
pools provided by an external AAA server must appear in
|
|
the corresponding list of IP address pool specified by
|
|
the cdtPppPeerIpAddrPoolTable.
|
|
|
|
'backupPools'
|
|
This option specifies that the corresponding names of
|
|
the IP address pools specified by the
|
|
cditPppPeerIpAddrPoolTable serve as backup pools to
|
|
those provided by an external AAA server.
|
|
|
|
'staticPools'
|
|
This option suppresses an attempt to load pools from an
|
|
external AAA server when the system encounters a missing
|
|
pool name.
|
|
|
|
This column is valid only if the 'peerIpAddrOpts' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
DEFVAL { { ipAddrForced } }
|
|
::= { cdtPppTemplateEntry 37 }
|
|
|
|
cdtPppPeerDefIpAddrSrc OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
pool(2),
|
|
dhcp(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies how the system assigns an IP address to
|
|
the peer of a target PPP connection:
|
|
|
|
'static'
|
|
The system assigns the IP address specified by the
|
|
corresponding instance of cdtPppPeerDefIpAddr.
|
|
|
|
'pool'
|
|
The system allocates the first available IP address from
|
|
the corresponding list of named pools contained by the
|
|
cdtPppPeerIpAddrPoolTable.
|
|
|
|
'dhcp'
|
|
The system acts as a DHCP proxy-client to obtain an IP
|
|
address.
|
|
|
|
This column is valid only if the 'peerDefIpAddrSrc' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
DEFVAL { pool }
|
|
::= { cdtPppTemplateEntry 38 }
|
|
|
|
cdtPppPeerDefIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address the system assigns to the
|
|
peer of a target PPP connection.
|
|
|
|
This column is valid only if the 'peerDefIpAddr' bit of the
|
|
corresponding instance of cdtPppValid is '1'."
|
|
DEFVAL { '00000000'H }
|
|
::= { cdtPppTemplateEntry 39 }
|
|
|
|
|
|
|
|
cdtPppPeerIpAddrPoolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CdtPppPeerIpAddrPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a prioritized list of named pools for each
|
|
PPP template. A list corresponding to a PPP template
|
|
specifies the pools the system searches in an attempt to
|
|
assign an IP address to the peer of a target PPP connection.
|
|
The system searches the pools in the order of their priority.
|
|
|
|
This table has an expansion dependent relationship on the
|
|
cdtPppTemplateTable, containing zero or more rows for each PPP
|
|
template."
|
|
::= { cdtPpp 2 }
|
|
|
|
cdtPppPeerIpAddrPoolEntry OBJECT-TYPE
|
|
SYNTAX CdtPppPeerIpAddrPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry specifies a named pool in a list of pools associated
|
|
with a PPP template. A PPP template can only have named
|
|
pools associated with it if it has a cdtPppPeerIpAddrSrc of
|
|
'pool'.
|
|
|
|
Any attempt to create an entry for a PPP template that does not
|
|
have a cdtPppPeerIpAddrSrc of 'pool' must result in a response
|
|
having an error-status of 'inconsistentValue'.
|
|
|
|
The system automatically creates a corresponding entry when the
|
|
system associates a named pool with a PPP template through
|
|
another management entity (e.g., the system's local console).
|
|
|
|
The system automatically destroys an entry under the following
|
|
circumstances:
|
|
|
|
1) The system or EMS/NMS destroys the corresponding row in the
|
|
cdtTemplateTable.
|
|
|
|
2) The system or EMS/NMS sets the corresponding instance of
|
|
cdtPppPeerIpAddrSrc with a value other than 'pool'."
|
|
INDEX {
|
|
cdtTemplateName,
|
|
cdtPppPeerIpAddrPoolPriority
|
|
}
|
|
::= { cdtPppPeerIpAddrPoolTable 1 }
|
|
|
|
CdtPppPeerIpAddrPoolEntry ::= SEQUENCE {
|
|
cdtPppPeerIpAddrPoolPriority Unsigned32,
|
|
cdtPppPeerIpAddrPoolStatus RowStatus,
|
|
cdtPppPeerIpAddrPoolStorage StorageType,
|
|
cdtPppPeerIpAddrPoolName SnmpAdminString
|
|
}
|
|
|
|
cdtPppPeerIpAddrPoolPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the relative priority of the named pool
|
|
in the list corresponding to a PPP template. The system
|
|
searches pools in the order of priority, where lower values
|
|
represent higher priority."
|
|
::= { cdtPppPeerIpAddrPoolEntry 1 }
|
|
|
|
cdtPppPeerIpAddrPoolStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of the entry. The following
|
|
columns must be valid before activating a subscriber access
|
|
profile:
|
|
|
|
- cdtPppPeerIpAddrPoolStorage
|
|
- cdtPppPeerIpAddrPoolName
|
|
|
|
However, these objects specify a default value. Thus, it is
|
|
possible to use create-and-go semantics without setting any
|
|
additional columns.
|
|
|
|
An implementation must not allow the EMS/NMS to create an entry
|
|
if the corresponding instance of cdtPppPeerIpAddrSrc is not
|
|
'pool'.
|
|
|
|
An implementation must allow the EMS/NMS to modify any column
|
|
when this column is 'active'."
|
|
::= { cdtPppPeerIpAddrPoolEntry 2 }
|
|
|
|
cdtPppPeerIpAddrPoolStorage OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies what happens to the name pool entry upon
|
|
restart.
|
|
|
|
If the corresponding instance of cdtTemplateSrc is not 'local',
|
|
then this column must be 'volatile'."
|
|
DEFVAL { volatile }
|
|
::= { cdtPppPeerIpAddrPoolEntry 3 }
|
|
|
|
cdtPppPeerIpAddrPoolName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the IP address pool
|
|
associated with the PPP template."
|
|
DEFVAL { "" }
|
|
::= { cdtPppPeerIpAddrPoolEntry 4 }
|
|
|
|
|
|
|
|
cdtEthernetTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CdtEthernetTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains attributes relating to dynamic interfaces
|
|
initiated on Ethernet virtual interfaces (e.g., EoMPLS) or
|
|
automatically created VLANs.
|
|
|
|
This table has a sparse-dependent relationship on the
|
|
cdtTemplateTable, containing a row for each dynamic template
|
|
having a cdtTemplateType of one of the following values:
|
|
|
|
'derived'
|
|
'ethernet'"
|
|
::= { cdtEthernet 1 }
|
|
|
|
cdtEthernetTemplateEntry OBJECT-TYPE
|
|
SYNTAX CdtEthernetTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing attributes relating to dynamic interfaces
|
|
initiated on Ethernet virtual interfaces (e.g., EoMPLS) or
|
|
automatically created VLANs.
|
|
|
|
The system automatically creates an entry when the system or the
|
|
EMS/NMS creates a row in the cdtTemplateTable with a
|
|
cdtTemplateType of one of the following values:
|
|
|
|
'derived'
|
|
'ethernet'
|
|
|
|
Likewise, the system automatically destroys an entry when the
|
|
system or the EMS/NMS destroys the corresponding row in the
|
|
cdtTemplateTable."
|
|
INDEX { cdtTemplateName }
|
|
::= { cdtEthernetTemplateTable 1 }
|
|
|
|
CdtEthernetTemplateEntry ::= SEQUENCE {
|
|
cdtEthernetValid BITS,
|
|
cdtEthernetBridgeDomain SnmpAdminString,
|
|
cdtEthernetPppoeEnable TruthValue,
|
|
cdtEthernetIpv4PointToPoint TruthValue,
|
|
cdtEthernetMacAddr MacAddress
|
|
}
|
|
|
|
cdtEthernetValid OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
bridgeDomain(0),
|
|
pppoeEnable(1),
|
|
ipv4PointToPoint(2),
|
|
macAddr(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies which attributes in the dynamic template
|
|
have been configured to valid values.
|
|
|
|
Each bit in this bit string corresponds to a column in this
|
|
table. If the bit is '0', then the value of the corresponding
|
|
column is not valid. If the bit is '1', then the value of the
|
|
corresponding column has been configured to a valid value.
|
|
|
|
The following list specifies the mappings between bits and the
|
|
columns:
|
|
|
|
bridgeDomain => cdtEthernetBridgeDomain
|
|
pppoeEnable => cdtEthernetPppoeEnable
|
|
ipv4PointToPoint => cdtEthernetIpv4PointToPoint
|
|
macAddr => cdtEthernetMacAddr"
|
|
DEFVAL { { } }
|
|
::= { cdtEthernetTemplateEntry 1 }
|
|
|
|
cdtEthernetBridgeDomain OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the bridge domain..."
|
|
DEFVAL { "" }
|
|
::= { cdtEthernetTemplateEntry 2 }
|
|
|
|
cdtEthernetPppoeEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether..."
|
|
DEFVAL { false }
|
|
::= { cdtEthernetTemplateEntry 3 }
|
|
|
|
cdtEthernetIpv4PointToPoint OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether..."
|
|
DEFVAL { false }
|
|
::= { cdtEthernetTemplateEntry 4 }
|
|
|
|
cdtEthernetMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the..."
|
|
DEFVAL { '000000000000'H }
|
|
::= { cdtEthernetTemplateEntry 5 }
|
|
|
|
|
|
|
|
cdtSrvTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CdtSrvTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains attributes relating to a service.
|
|
|
|
This table has a sparse-dependent relationship on the
|
|
cdtTemplateTable, containing a row for each dynamic template
|
|
having a cdtTemplateType of one of the following values:
|
|
|
|
'derived'
|
|
'service'"
|
|
::= { cdtService 1 }
|
|
|
|
cdtSrvTemplateEntry OBJECT-TYPE
|
|
SYNTAX CdtSrvTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing attributes relating to a service.
|
|
|
|
The system automatically creates entry when the system or the
|
|
EMS/NMS creates a row in the cdtTemplateTable with a
|
|
cdtTemplateType of one of the following values:
|
|
|
|
'derived'
|
|
'service'
|
|
|
|
Likewise, the system automatically destroys an entry when the
|
|
system or the EMS/NMS destroys the corresponding row in the
|
|
cdtTemplateTable."
|
|
INDEX { cdtTemplateName }
|
|
::= { cdtSrvTemplateTable 1 }
|
|
|
|
CdtSrvTemplateEntry ::= SEQUENCE {
|
|
cdtSrvValid BITS,
|
|
cdtSrvNetworkSrv INTEGER,
|
|
cdtSrvVpdnGroup SnmpAdminString,
|
|
cdtSrvSgSrvGroup SnmpAdminString,
|
|
cdtSrvSgSrvType INTEGER,
|
|
cdtSrvMulticast TruthValue
|
|
}
|
|
|
|
cdtSrvValid OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
networkSrv(0),
|
|
vpdnGroup(1),
|
|
sgSrvGroup(2),
|
|
sgSrvType(3),
|
|
multicast(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies which attributes in the dynamic template
|
|
have been configured to valid values.
|
|
|
|
Each bit in this bit string corresponds to a column in this
|
|
table. If the bit is '0', then the value of the corresponding
|
|
column is not valid. If the bit is '1', then the value of the
|
|
corresponding column has been configured to a valid value.
|
|
|
|
The following list specifies the mappings between bits and the
|
|
columns:
|
|
|
|
networkSrv => cdtSrvNetworkSrv
|
|
vpdnGroup => cdtSrvVpdnGroup
|
|
sgSrvGroup => cdtSrvGroup
|
|
sgSrvType => cdtSrvSgSrvType
|
|
multicast => cdtSrvMulticast"
|
|
DEFVAL { { } }
|
|
::= { cdtSrvTemplateEntry 1 }
|
|
|
|
cdtSrvNetworkSrv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
none(2),
|
|
local(3),
|
|
vpdn(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of network service provided by
|
|
the target service:
|
|
|
|
'other'
|
|
The implementation of this MIB module does not recognize
|
|
the configured network service.
|
|
|
|
'none'
|
|
The target subscriber service does not provide a network
|
|
service to subscribers sessions.
|
|
|
|
'local'
|
|
The target subscriber service provides local termination
|
|
for subscriber sessions.
|
|
|
|
'vpdn'
|
|
The target subscriber service provides a Virtual Private
|
|
Dialup Network service for subscriber sessions.
|
|
|
|
This column is valid only if the 'networkSrv' bit of the
|
|
corresponding instance of cdtSrvValid is '1'."
|
|
DEFVAL { none }
|
|
::= { cdtSrvTemplateEntry 2 }
|
|
|
|
cdtSrvVpdnGroup OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the VPDN group used to
|
|
configure the network service.
|
|
|
|
This column is valid only if the 'vpdnGroup' bit of the
|
|
corresponding instance of cdtSrvValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtSrvTemplateEntry 3 }
|
|
|
|
cdtSrvSgSrvGroup OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the name of the service group with which
|
|
the system associates subscriber sessions. A service group
|
|
specifies a set of services that may be active simultaneously
|
|
for a given subscriber session. Typically, a service group
|
|
contains a primary service and one or more secondary services.
|
|
|
|
This column is valid only if the 'sgSrvGroup' bit of the
|
|
corresponding instance of cdtSrvValid is '1'."
|
|
DEFVAL { "" }
|
|
::= { cdtSrvTemplateEntry 4 }
|
|
|
|
cdtSrvSgSrvType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the target service specifies a
|
|
network-forwarding policy:
|
|
|
|
'primary'
|
|
The target service specifies a network-forwarding
|
|
policy. Primary services are mutually exclusive; that
|
|
is, only one primary service can be activated for any
|
|
given subscriber session.
|
|
|
|
'secondary'
|
|
The target service has a dependence on the primary
|
|
service in the group specified by the corresponding
|
|
instance of cdtSuBSrvSgSrvGroup. After the system
|
|
activates the primary service, it activates secondary
|
|
services. When the system deactivates the primary
|
|
service, then it deactivates all the secondary services
|
|
in the service group.
|
|
|
|
This column is valid only if the 'sgSrvType' bit of the
|
|
corresponding instance of cdtSrvValid is '1'."
|
|
DEFVAL { secondary }
|
|
::= { cdtSrvTemplateEntry 5 }
|
|
|
|
cdtSrvMulticast OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects specifies whether the system enables multicast
|
|
service for subscriber sessions of the target service.
|
|
|
|
This column is valid only if the 'sgSrvMcastRoutingIf' bit of
|
|
the corresponding instance of cdtSrvValid is '1'."
|
|
DEFVAL { false }
|
|
::= { cdtSrvTemplateEntry 6 }
|
|
|
|
|
|
-- Notifications
|
|
--
|
|
|
|
--
|
|
-- Conformance
|
|
|
|
ciscoDynamicTemplateMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIBConform 1 }
|
|
|
|
ciscoDynamicTemplateMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoDynamicTemplateMIBConform 2 }
|
|
|
|
|
|
ciscoDynamicTemplateR1Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This compliance statement specifies the minimal requirements an
|
|
implementation must meet in order to claim full compliance with
|
|
the definition of the CISCO-DYNAMIC-TEMPLATE-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cdtBaseGroup,
|
|
cdtCommonGroup
|
|
}
|
|
|
|
GROUP cdtIfGroup
|
|
DESCRIPTION
|
|
"This group is only mandatory for those implementations
|
|
supporting PPP or Ethernet templates."
|
|
|
|
GROUP cdtPppGroup
|
|
DESCRIPTION
|
|
"This group is only mandatory for those implementations
|
|
supporting PPP templates."
|
|
|
|
GROUP cdtEthernetGroup
|
|
DESCRIPTION
|
|
"This group is only mandatory for those implementations
|
|
supporting Ethernet templates."
|
|
|
|
GROUP cdtSrvGroup
|
|
DESCRIPTION
|
|
"This group is only mandatory for those implementations
|
|
supporting service templates."
|
|
::= { ciscoDynamicTemplateMIBCompliances 1 }
|
|
|
|
-- Units of Conformance
|
|
|
|
cdtBaseGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cdtTemplateStatus,
|
|
cdtTemplateStorage,
|
|
cdtTemplateType,
|
|
cdtTemplateSrc,
|
|
cdtTemplateUsageCount,
|
|
cdtTemplateTargetStatus,
|
|
cdtTemplateTargetStorage,
|
|
cdtTemplateAssociationPrecedence,
|
|
cdtTemplateUsageTargetType,
|
|
cdtTemplateUsageTargetId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group contains objects describing dynamic templates,
|
|
targets of dynamic templates, and the associations between
|
|
dynamic templates and targets."
|
|
::= { ciscoDynamicTemplateMIBGroups 1 }
|
|
|
|
cdtCommonGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cdtCommonValid,
|
|
cdtCommonDescr,
|
|
cdtCommonKeepaliveInt,
|
|
cdtCommonKeepaliveRetries,
|
|
cdtCommonVrf,
|
|
cdtCommonAddrPool,
|
|
cdtCommonIpv4AccessGroup,
|
|
cdtCommonIpv4Unreachables,
|
|
cdtCommonIpv6AccessGroup,
|
|
cdtCommonIpv6Unreachables,
|
|
cdtCommonSrvSubControl,
|
|
cdtCommonSrvRedirect,
|
|
cdtCommonSrvAcct,
|
|
cdtCommonSrvQos,
|
|
cdtCommonSrvNetflow
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group contains objects describing attributes common to
|
|
all dynamic templates."
|
|
::= { ciscoDynamicTemplateMIBGroups 2 }
|
|
|
|
cdtIfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cdtIfValid,
|
|
cdtIfMtu,
|
|
cdtIfCdpEnable,
|
|
cdtIfFlowMonitor,
|
|
cdtIfIpv4Unnumbered,
|
|
cdtIfIpv4SubEnable,
|
|
cdtIfIpv4Mtu,
|
|
cdtIfIpv4TcpMssAdjust,
|
|
cdtIfIpv4VerifyUniRpf,
|
|
cdtIfIpv4VerifyUniRpfAcl,
|
|
cdtIfIpv4VerifyUniRpfOpts,
|
|
cdtIfIpv6Enable,
|
|
cdtIfIpv6SubEnable,
|
|
cdtIfIpv6TcpMssAdjust,
|
|
cdtIfIpv6VerifyUniRpf,
|
|
cdtIfIpv6VerifyUniRpfAcl,
|
|
cdtIfIpv6VerifyUniRpfOpts,
|
|
cdtIfIpv6NdPrefix,
|
|
cdtIfIpv6NdPrefixLength,
|
|
cdtIfIpv6NdValidLife,
|
|
cdtIfIpv6NdPreferredLife,
|
|
cdtIfIpv6NdOpts,
|
|
cdtIfIpv6NdDadAttempts,
|
|
cdtIfIpv6NdNsInterval,
|
|
cdtIfIpv6NdReachableTime,
|
|
cdtIfIpv6NdRaIntervalUnits,
|
|
cdtIfIpv6NdRaIntervalMax,
|
|
cdtIfIpv6NdRaIntervalMin,
|
|
cdtIfIpv6NdRaLife,
|
|
cdtIfIpv6NdRouterPreference
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group contains objects describing attributes common to
|
|
dynamic templates applied to dynamic interfaces."
|
|
::= { ciscoDynamicTemplateMIBGroups 3 }
|
|
|
|
cdtPppGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cdtPppValid,
|
|
cdtPppAccounting,
|
|
cdtPppAuthentication,
|
|
cdtPppAuthenticationMethods,
|
|
cdtPppAuthorization,
|
|
cdtPppLoopbackIgnore,
|
|
cdtPppMaxBadAuth,
|
|
cdtPppMaxConfigure,
|
|
cdtPppMaxFailure,
|
|
cdtPppMaxTerminate,
|
|
cdtPppTimeoutAuthentication,
|
|
cdtPppTimeoutRetry,
|
|
cdtPppChapOpts,
|
|
cdtPppChapHostname,
|
|
cdtPppChapPassword,
|
|
cdtPppMsChapV1Opts,
|
|
cdtPppMsChapV1Hostname,
|
|
cdtPppMsChapV1Password,
|
|
cdtPppMsChapV2Opts,
|
|
cdtPppMsChapV2Hostname,
|
|
cdtPppMsChapV2Password,
|
|
cdtPppPapOpts,
|
|
cdtPppPapUsername,
|
|
cdtPppPapPassword,
|
|
cdtPppEapOpts,
|
|
cdtPppEapIdentity,
|
|
cdtPppEapPassword,
|
|
cdtPppIpcpAddrOption,
|
|
cdtPppIpcpDnsOption,
|
|
cdtPppIpcpDnsPrimary,
|
|
cdtPppIpcpDnsSecondary,
|
|
cdtPppIpcpWinsOption,
|
|
cdtPppIpcpWinsPrimary,
|
|
cdtPppIpcpWinsSecondary,
|
|
cdtPppIpcpMaskOption,
|
|
cdtPppIpcpMask,
|
|
cdtPppPeerDefIpAddrOpts,
|
|
cdtPppPeerDefIpAddrSrc,
|
|
cdtPppPeerDefIpAddr,
|
|
cdtPppPeerIpAddrPoolStatus,
|
|
cdtPppPeerIpAddrPoolStorage,
|
|
cdtPppPeerIpAddrPoolName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group contains objects describing attributes contained by
|
|
PPP templates."
|
|
::= { ciscoDynamicTemplateMIBGroups 4 }
|
|
|
|
cdtEthernetGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cdtEthernetValid,
|
|
cdtEthernetBridgeDomain,
|
|
cdtEthernetPppoeEnable,
|
|
cdtEthernetIpv4PointToPoint,
|
|
cdtEthernetMacAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group contains objects describing attributes contained by
|
|
Ethernet templates."
|
|
::= { ciscoDynamicTemplateMIBGroups 5 }
|
|
|
|
cdtSrvGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cdtSrvValid,
|
|
cdtSrvNetworkSrv,
|
|
cdtSrvVpdnGroup,
|
|
cdtSrvSgSrvGroup,
|
|
cdtSrvSgSrvType,
|
|
cdtSrvMulticast
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group contains objects describing attributes contained by
|
|
service templates."
|
|
::= { ciscoDynamicTemplateMIBGroups 6 }
|
|
|
|
END
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|