562 lines
18 KiB
Plaintext
562 lines
18 KiB
Plaintext
-- This file was included in WWP MIB release 04-10-01-0027
|
|
--
|
|
-- WWP-LEOS-RSTP-MIB.my
|
|
--
|
|
--
|
|
|
|
WWP-LEOS-RSTP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
TruthValue, RowStatus, TEXTUAL-CONVENTION, DisplayString, MacAddress
|
|
FROM SNMPv2-TC
|
|
dot1dStpPort
|
|
FROM BRIDGE-MIB
|
|
dot1dStpPortOperEdgePort
|
|
FROM RSTP-MIB
|
|
wwpModules, wwpModulesLeos
|
|
FROM WWP-SMI;
|
|
|
|
|
|
wwpLeosRstpMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201108020000Z"
|
|
ORGANIZATION "Ciena, Inc"
|
|
CONTACT-INFO
|
|
" Mib Meister
|
|
115 North Sullivan Road
|
|
Spokane Valley, WA 99037
|
|
USA
|
|
Phone: +1 509 242 9000
|
|
Email: support@ciena.com"
|
|
DESCRIPTION
|
|
"Deprecated wwpLeosRstpPvstBpduReceivedNotification."
|
|
REVISION "201108020000Z"
|
|
DESCRIPTION
|
|
"The MIB module for the WWP RstpMib specific information."
|
|
REVISION "200104031700Z"
|
|
DESCRIPTION
|
|
"Initial creation."
|
|
::= { wwpModulesLeos 13 }
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
wwpLeosRstpMIBObjects OBJECT IDENTIFIER ::= { wwpLeosRstpMIB 1 }
|
|
|
|
wwpLeosRstpDomain OBJECT IDENTIFIER ::= { wwpLeosRstpMIBObjects 1 }
|
|
wwpLeosRstpPortExt OBJECT IDENTIFIER ::= { wwpLeosRstpMIBObjects 2 }
|
|
wwpLeosRstpLocalPortExt OBJECT IDENTIFIER ::= { wwpLeosRstpMIBObjects 3 }
|
|
|
|
-- Notifications
|
|
|
|
wwpLeosRstpMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosRstpMIB 2 }
|
|
wwpLeosRstpMIBNotifications OBJECT IDENTIFIER ::= { wwpLeosRstpMIBNotificationPrefix 0 }
|
|
|
|
-- Conformance information
|
|
|
|
wwpLeosRstpMIBConformance OBJECT IDENTIFIER ::= { wwpLeosRstpMIB 3 }
|
|
wwpLeosRstpMIBCompliances OBJECT IDENTIFIER ::= { wwpLeosRstpMIBConformance 1 }
|
|
wwpLeosRstpMIBGroups OBJECT IDENTIFIER ::= { wwpLeosRstpMIBConformance 2 }
|
|
|
|
wwpLeosRstpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
rstp(2),
|
|
domain(3),
|
|
mstp(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object sets the mode to rstp, domain, or mstp mode.
|
|
If the selected mode is not supported by the device, an
|
|
SNMP error will be returned and the value of this object
|
|
will remain unchanged."
|
|
::= { wwpLeosRstpDomain 1 }
|
|
|
|
wwpLeosRstpDomainTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosRstpDomainEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of Rstp Domain."
|
|
::= { wwpLeosRstpDomain 2 }
|
|
|
|
wwpLeosRstpDomainEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosRstpDomainEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rstp domain entry in the rstp domain table."
|
|
INDEX { wwpLeosRstpDomainId }
|
|
::= { wwpLeosRstpDomainTable 1 }
|
|
|
|
WwpLeosRstpDomainEntry ::= SEQUENCE {
|
|
wwpLeosRstpDomainId INTEGER,
|
|
wwpLeosRstpDomainName DisplayString,
|
|
wwpLeosRstpDomainStatus RowStatus
|
|
}
|
|
|
|
wwpLeosRstpDomainId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Domain Id used as an index in the rstp domain. Domain id starts at 0."
|
|
::= { wwpLeosRstpDomainEntry 1 }
|
|
|
|
wwpLeosRstpDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the domain."
|
|
::= { wwpLeosRstpDomainEntry 2 }
|
|
|
|
wwpLeosRstpDomainStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create a row in this table, the snmp manager must
|
|
set this object to 'createAndGo'. To delete the entry
|
|
set it to delete."
|
|
::= { wwpLeosRstpDomainEntry 3 }
|
|
|
|
--
|
|
-- RSTP Port Membership table
|
|
--
|
|
wwpLeosRstpDomainMemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosRstpDomainMemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of Rstp Domain."
|
|
::= { wwpLeosRstpDomain 3 }
|
|
|
|
wwpLeosRstpDomainMemEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosRstpDomainMemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rstp domain member entry."
|
|
INDEX { wwpLeosRstpDomainId, wwpLeosRstpDomainPortId}
|
|
::= { wwpLeosRstpDomainMemTable 1 }
|
|
|
|
WwpLeosRstpDomainMemEntry ::= SEQUENCE {
|
|
wwpLeosRstpDomainPortId INTEGER,
|
|
wwpLeosRstpDomainMemStatus RowStatus
|
|
}
|
|
|
|
wwpLeosRstpDomainPortId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port ID for the instance. Port ID's start at 1,
|
|
and may not be consecutive for each additional port.
|
|
This port Id should refer to the dot1dBasePort in the
|
|
Dot1dBasePortEntry."
|
|
::= { wwpLeosRstpDomainMemEntry 1 }
|
|
|
|
wwpLeosRstpDomainMemStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To add a port to the domain create a row in this table,
|
|
by setting this object to 'createAndGo'. To remove the port
|
|
from the domain set this object to delete."
|
|
::= { wwpLeosRstpDomainMemEntry 2 }
|
|
|
|
--
|
|
-- RSTP domain attributes table table
|
|
--
|
|
|
|
wwpLeosRstpBridgeDomainAttrs OBJECT IDENTIFIER ::= { wwpLeosRstpDomain 4 }
|
|
|
|
wwpLeosRstpDomainAttrsForceVer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stp(0),
|
|
notDefined(1),
|
|
rstp(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the domain version to rstp or stp."
|
|
::= { wwpLeosRstpBridgeDomainAttrs 1 }
|
|
|
|
wwpLeosRstpDomainAttrsForwardDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (4..30)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the forward delay for rstp domain."
|
|
::= { wwpLeosRstpBridgeDomainAttrs 2 }
|
|
|
|
wwpLeosRstpDomainAttrsHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the hello time for the rstp domain."
|
|
::= { wwpLeosRstpBridgeDomainAttrs 3 }
|
|
|
|
wwpLeosRstpDomainAttrsLoopBackBlock OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies if loopback port blocking feature is
|
|
enabled/disabled."
|
|
::= { wwpLeosRstpBridgeDomainAttrs 4 }
|
|
|
|
wwpLeosRstpDomainAttrsMaxAge OBJECT-TYPE
|
|
SYNTAX INTEGER (6..40)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the max age time for the rstp domain."
|
|
::= { wwpLeosRstpBridgeDomainAttrs 5 }
|
|
|
|
wwpLeosRstpDomainAttrsPathCostDef OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the path cost. if it is 1 then it is 8021d
|
|
else it is 8021t."
|
|
::= { wwpLeosRstpBridgeDomainAttrs 6 }
|
|
|
|
wwpLeosRstpDomainAttrsPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object will set the rstp domain priority."
|
|
::= { wwpLeosRstpBridgeDomainAttrs 7 }
|
|
|
|
wwpLeosRstpDomainAttrsTxHoldCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the tx hold count for a domain."
|
|
::= { wwpLeosRstpBridgeDomainAttrs 8 }
|
|
--
|
|
-- Domain Attributes
|
|
--
|
|
wwpLeosRstpDomainAttrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosRstpDomainAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of each Rstp Domain."
|
|
::= { wwpLeosRstpDomain 5 }
|
|
|
|
wwpLeosRstpDomainAttrEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosRstpDomainAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rstp domain attributes entry."
|
|
INDEX { wwpLeosRstpDomainId }
|
|
::= { wwpLeosRstpDomainAttrTable 1 }
|
|
|
|
WwpLeosRstpDomainAttrEntry ::= SEQUENCE {
|
|
wwpLeosRstpDomainAttrDesignatedBridgePri INTEGER,
|
|
wwpLeosRstpDomainAttrDesignatedBridgeMac MacAddress,
|
|
wwpLeosRstpDomainAttrDesignatedRootPri INTEGER,
|
|
wwpLeosRstpDomainAttrDesignatedRootMac MacAddress,
|
|
wwpLeosRstpDomainAttrRootCost INTEGER,
|
|
wwpLeosRstpDomainAttrRootPort INTEGER,
|
|
wwpLeosRstpDomainAttrMaxAge INTEGER,
|
|
wwpLeosRstpDomainAttrHelloTime INTEGER,
|
|
wwpLeosRstpDomainAttrHoldTime INTEGER,
|
|
wwpLeosRstpDomainAttrForwardDelay INTEGER,
|
|
wwpLeosRstpDomainAttrPriority INTEGER
|
|
}
|
|
|
|
wwpLeosRstpDomainAttrDesignatedBridgePri OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the designated bridge priority for specified domain.
|
|
This attribute represents the first two octets of the (8 octet
|
|
long) designated bridge ID. The writable portion of these two octets is the first 3 bits
|
|
starting from least significant bit."
|
|
::= { wwpLeosRstpDomainAttrEntry 1 }
|
|
|
|
wwpLeosRstpDomainAttrDesignatedBridgeMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the designated bridge mac address for specified domain."
|
|
::= { wwpLeosRstpDomainAttrEntry 2 }
|
|
|
|
wwpLeosRstpDomainAttrDesignatedRootPri OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the designated root priority for specified domain.
|
|
This attribute represents the first two octets of the (8 octet
|
|
long) designated root bridge ID. The writable portion of these two octets
|
|
is the first 3 bits starting from least significant bit."
|
|
::= { wwpLeosRstpDomainAttrEntry 3 }
|
|
|
|
wwpLeosRstpDomainAttrDesignatedRootMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the designated root mac address for specified domain."
|
|
::= { wwpLeosRstpDomainAttrEntry 4 }
|
|
|
|
wwpLeosRstpDomainAttrRootCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the root cost for specified domain."
|
|
::= { wwpLeosRstpDomainAttrEntry 5 }
|
|
|
|
wwpLeosRstpDomainAttrRootPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the designated port for specified domain."
|
|
::= { wwpLeosRstpDomainAttrEntry 6 }
|
|
|
|
wwpLeosRstpDomainAttrMaxAge OBJECT-TYPE
|
|
SYNTAX INTEGER (6..40)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the max age for specified domain."
|
|
::= { wwpLeosRstpDomainAttrEntry 7 }
|
|
|
|
wwpLeosRstpDomainAttrHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the hello time for specified domain."
|
|
::= { wwpLeosRstpDomainAttrEntry 8 }
|
|
|
|
wwpLeosRstpDomainAttrHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the hold time for specified domain."
|
|
::= { wwpLeosRstpDomainAttrEntry 9 }
|
|
|
|
wwpLeosRstpDomainAttrForwardDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (4..30)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the forward delay for specified domain."
|
|
::= { wwpLeosRstpDomainAttrEntry 10 }
|
|
|
|
wwpLeosRstpDomainAttrPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the domain priority for given domain."
|
|
::= { wwpLeosRstpDomainAttrEntry 11 }
|
|
|
|
--
|
|
-- Rstp Max Age Event Interval
|
|
--
|
|
wwpLeosRstpMaxAgeEventInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines how often the events relating to
|
|
Max Age BPDU's being Sent or Received will be generated.
|
|
It is the number of seconds that must pass between events."
|
|
::= { wwpLeosRstpDomain 6 }
|
|
|
|
--
|
|
-- Rstp PortInfo
|
|
--
|
|
wwpLeosRstpPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosRstpPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table that contains additional information about each port.
|
|
This table is extension of dot1dStpPortTable."
|
|
::= { wwpLeosRstpPortExt 1 }
|
|
|
|
wwpLeosRstpPortInfoEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosRstpPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rstp port information entry."
|
|
INDEX { wwpLeosRstpPortId }
|
|
::= { wwpLeosRstpPortInfoTable 1 }
|
|
|
|
WwpLeosRstpPortInfoEntry ::= SEQUENCE {
|
|
wwpLeosRstpPortId INTEGER,
|
|
wwpLeosRstpPortDesiginatedId MacAddress,
|
|
wwpLeosRstpPortDesiginatedPid OCTET STRING,
|
|
wwpLeosRstpPortDynPathCostState INTEGER
|
|
}
|
|
|
|
wwpLeosRstpPortId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the port num used as index in the table. Value of this port id is same
|
|
as dot1dStpPort."
|
|
::= { wwpLeosRstpPortInfoEntry 1 }
|
|
|
|
wwpLeosRstpPortDesiginatedId OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the designated id for the given port."
|
|
::= { wwpLeosRstpPortInfoEntry 2 }
|
|
|
|
wwpLeosRstpPortDesiginatedPid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the designated id for the given port."
|
|
::= { wwpLeosRstpPortInfoEntry 3 }
|
|
--
|
|
-- Rstp Ext PortInfo
|
|
--
|
|
wwpLeosRstpLocalPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosRstpLocalPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table that contains additional local information about
|
|
each port. This table is also extension of dot1dStpPortTable."
|
|
::= { wwpLeosRstpLocalPortExt 1 }
|
|
|
|
wwpLeosRstpLocalPortInfoEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosRstpLocalPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rstp local port information entry."
|
|
INDEX { wwpLeosRstpPortId }
|
|
::= { wwpLeosRstpLocalPortInfoTable 1 }
|
|
|
|
WwpLeosRstpLocalPortInfoEntry ::= SEQUENCE {
|
|
wwpLeosRstpPortDynPathCostState INTEGER
|
|
}
|
|
|
|
wwpLeosRstpPortDynPathCostState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute enable | disable dynamic path cost for the given port.
|
|
Before setting dot1dStpPortPathCost user must set
|
|
wwpLeosRstpPortDynPathCostState = disabled."
|
|
::= { wwpLeosRstpLocalPortInfoEntry 1 }
|
|
|
|
--
|
|
-- Notifications
|
|
--
|
|
wwpLeosRstpPortBackupNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1dStpPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosRstpPortBackupNotification is sent whenever
|
|
device detects self loop i.e. same cable connected to
|
|
two ports on the same device."
|
|
::= { wwpLeosRstpMIBNotifications 1 }
|
|
|
|
wwpLeosRstpPvstBpduReceivedNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1dStpPort
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A wwpLeosRstpPvstBpduReceivedNotification is sent whenever
|
|
PVST BPDU is received on the port. This trap is sent out
|
|
every minute."
|
|
::= { wwpLeosRstpMIBNotifications 2 }
|
|
|
|
wwpLeosRstpSelfLoopNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1dStpPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosRstpSelfLoopNotification is sent whenever
|
|
device detects same cable connected to a port in a loop back.
|
|
Also if loop-back blocking is enabled on the device then
|
|
rstp will block this port (self disable)."
|
|
::= { wwpLeosRstpMIBNotifications 3 }
|
|
|
|
wwpLeosRstpPortOperEdgeNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1dStpPort,
|
|
dot1dStpPortOperEdgePort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosRstpPortOperEdgeNotification trap is sent whenever
|
|
device detects a port Rstp OperEdge change."
|
|
::= { wwpLeosRstpMIBNotifications 4 }
|
|
|
|
wwpLeosRstpPortFlapNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1dStpPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosRstpPortFlapNotification trap is sent whenever
|
|
device detects a port flapping.
|
|
|
|
Trap is generated under following criteria.
|
|
If device detects port flapped more than once within 1 minute timer period and
|
|
it has not sent trap within last 5 minutes then it will generate this trap."
|
|
::= { wwpLeosRstpMIBNotifications 5 }
|
|
|
|
wwpLeosRstpBridgeRootPortLostNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1dStpPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wwpLeosRstpBridgeRootPortLostNotification trap is sent whenever
|
|
device detects that bridge root port is lost.
|
|
|
|
This trap will indicate either the link failure or link partner RSTP disabled."
|
|
::= { wwpLeosRstpMIBNotifications 6 }
|
|
|
|
END
|
|
|
|
--
|
|
-- WWP-RSTP-MIB
|
|
--
|