794 lines
29 KiB
Plaintext
794 lines
29 KiB
Plaintext
BROCADE-ROUTEMAP-MIB DEFINITIONS ::= BEGIN
|
||
|
||
IMPORTS
|
||
MODULE-IDENTITY, OBJECT-TYPE,IpAddress,Counter64, Unsigned32,Integer32
|
||
FROM SNMPv2-SMI -- [RFC2578]
|
||
DisplayString, MacAddress, TruthValue, RowStatus, TEXTUAL-CONVENTION
|
||
FROM SNMPv2-TC -- [RFC2579]
|
||
InterfaceIndex
|
||
FROM IF-MIB -- [RFC2863]
|
||
InetAddress, InetAddressType
|
||
FROM INET-ADDRESS-MIB -- [RFC4001]
|
||
Action, AclNumber
|
||
FROM FOUNDRY-SN-IP-ACL-MIB -- [snaclu]
|
||
brcdRouteMap, FdryVlanIdOrNoneTC
|
||
FROM FOUNDRY-SN-SWITCH-GROUP-MIB; -- [snswitch]
|
||
|
||
brcdRouteMapMIB MODULE-IDENTITY
|
||
LAST-UPDATED "201111280000Z" -- Novemeber 28, 2011
|
||
ORGANIZATION "Brocade Communications Systems, Inc."
|
||
CONTACT-INFO
|
||
"Technical Support Center
|
||
130 Holger Way,
|
||
San Jose, CA 95134
|
||
Email: ipsupport@brocade.com
|
||
Phone: 1-800-752-8061
|
||
URL: www.brocade.com"
|
||
DESCRIPTION
|
||
"This MIB module contains the managed object definitions for
|
||
routemaps within the IP Routers.
|
||
|
||
Copyright 1996-2011 Brocade Communications Systems, Inc.
|
||
All rights reserved.
|
||
This Brocade Communications Systems SNMP Management Information
|
||
Base Specification embodies Brocade Communications Systems'
|
||
confidential and proprietary intellectual property.
|
||
Brocade Communications Systems retains all title and ownership
|
||
in the Specification, including any revisions.
|
||
|
||
This Specification is supplied AS IS, and Brocade Communications
|
||
Systems makes no warranty, either express or implied, as to the
|
||
use, operation, condition, or performance of the specification,
|
||
and any unintended consequence it may on the user environment."
|
||
|
||
REVISION "201111280000Z" -- November 28, 2011
|
||
DESCRIPTION
|
||
"Initial revision"
|
||
::= { brcdRouteMap 1 }
|
||
|
||
--
|
||
-- high level object identifiers
|
||
--
|
||
brcdRouteMapConfig OBJECT IDENTIFIER ::= { brcdRouteMapMIB 1 }
|
||
brcdRouteMapShow OBJECT IDENTIFIER ::= { brcdRouteMapMIB 2 }
|
||
|
||
--
|
||
-- RouteMap Configuration Table
|
||
--
|
||
|
||
brcdRouteMapTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF BrcdRouteMapEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table contains the routemap entries."
|
||
::= { brcdRouteMapConfig 1 }
|
||
|
||
brcdRouteMapEntry OBJECT-TYPE
|
||
SYNTAX BrcdRouteMapEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A row in this table represents a routemap entry."
|
||
INDEX {brcdRouteMapName, brcdRouteMapSequence }
|
||
::= { brcdRouteMapTable 1 }
|
||
|
||
BrcdRouteMapEntry ::= SEQUENCE {
|
||
brcdRouteMapName
|
||
DisplayString,
|
||
brcdRouteMapSequence
|
||
Unsigned32,
|
||
brcdRouteMapAction
|
||
Action,
|
||
brcdRouteMapRuleName
|
||
DisplayString,
|
||
brcdRouteMapRowStatus
|
||
RowStatus
|
||
}
|
||
|
||
brcdRouteMapName OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the route map.
|
||
In NetIron, the name can have max 80 characters."
|
||
::= { brcdRouteMapEntry 1 }
|
||
|
||
brcdRouteMapSequence OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the sequence to insert to/delete from existing route-map entry."
|
||
::= { brcdRouteMapEntry 2 }
|
||
|
||
brcdRouteMapAction OBJECT-TYPE
|
||
SYNTAX Action
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the action to be taken for this Route Map entry."
|
||
::= { brcdRouteMapEntry 3 }
|
||
|
||
|
||
brcdRouteMapRuleName OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the path name for this map. Max size is 127.
|
||
This object is not supported in CES/CER platform."
|
||
::= { brcdRouteMapEntry 4 }
|
||
|
||
brcdRouteMapRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Setting this object to createAndGo(4) results in addition
|
||
of new row. Setting this object to destroy( 6)results in
|
||
removal of a row. The value active(1) is returned for
|
||
get and get-next requests.
|
||
Other values in the enumeration are not used."
|
||
::= { brcdRouteMapEntry 5 }
|
||
|
||
|
||
--
|
||
-- RouteMap Match Clause Config Table for a given routemap.
|
||
--
|
||
|
||
brcdRouteMapMatchTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF BrcdRouteMapMatchEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RouteMap Match Clause Config Table for a given routemap."
|
||
::= { brcdRouteMapConfig 2 }
|
||
|
||
brcdRouteMapMatchEntry OBJECT-TYPE
|
||
SYNTAX BrcdRouteMapMatchEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A row in this table represents a routemap match clause entry.
|
||
Before creating an instance row in this table using a name, a
|
||
corresponding entry with that name needs to be existing in the
|
||
brcdRouteMapTable."
|
||
INDEX {brcdRouteMapName,brcdRouteMapSequence, brcdRouteMapMatchSequence, brcdRouteMapMatchType }
|
||
::= { brcdRouteMapMatchTable 1 }
|
||
|
||
BrcdRouteMapMatchEntry ::= SEQUENCE {
|
||
brcdRouteMapMatchSequence
|
||
Integer32,
|
||
brcdRouteMapMatchType
|
||
INTEGER,
|
||
brcdRouteMapMatchValue
|
||
DisplayString,
|
||
brcdRouteMapMatchCliString
|
||
DisplayString,
|
||
brcdRouteMapMatchRowStatus
|
||
RowStatus
|
||
}
|
||
|
||
brcdRouteMapMatchSequence OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object identifies the position in this table where this
|
||
match rule is added. This is running integer.
|
||
If the brcdRouteMapMatchRowStatus is createAndGo then the row
|
||
is inserted if there is no match rule is present at
|
||
brcdRouteMapMatchIndex position.
|
||
If there is a rule present it should be of same kind.
|
||
If not then the set request fails.
|
||
Application can obtain value for this object in the last row
|
||
and use the next value to insert a new row in this table."
|
||
::= { brcdRouteMapMatchEntry 1 }
|
||
|
||
brcdRouteMapMatchType OBJECT-TYPE
|
||
SYNTAX INTEGER { matchUndefined(0),
|
||
matchAsPath(1),
|
||
matchBgpCommunityName(2),
|
||
matchBgpCommunityNameExact(3),
|
||
matchBgpExtCommunityNumber(4),
|
||
matchInterfaces(5),
|
||
matchIpv4AddressAclNames(6),
|
||
matchIpv4AddressAclNumbers(7),
|
||
matchIpv4AddressPrefixList(8),
|
||
matchIpv4NextHopAclNames(9),
|
||
matchIpv4NextHopAclNumbers(10),
|
||
matchIpv4NextHopPrefixList(11),
|
||
matchIpv4RouteSourceAclNames(12),
|
||
matchIpv4RouteSourceAclNumbers(13),
|
||
matchIpv4RouteSourcePrefixList(14),
|
||
matchIpv6AddressAclNames(15),
|
||
matchIpv6AddressPrefixList(16),
|
||
matchIpv6NextHopPrefixList(17),
|
||
matchIpv6RouteSourcePrefixList(18),
|
||
matchMetric(19),
|
||
matchRoutingProtocol(20),
|
||
matchRouteType(21),
|
||
matchTags(22)}
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A pair of brcdRouteMapMatchType and brcdRouteMapMatchValue
|
||
objects specifies a particular match clause."
|
||
::= { brcdRouteMapMatchEntry 2 }
|
||
|
||
brcdRouteMapMatchValue OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the value corresponding to the
|
||
brcdRouteMapMatchType.
|
||
|
||
matchAsPath - Identifies one or more BGP AS Paths to be matched.
|
||
This list of AS Path names are separated by one or more spaces.
|
||
|
||
matchBgpCommunityName ֠Identifies one or more BGP community ACL names to
|
||
be matched. This list of BGP community ACL names separated by one or more
|
||
spaces.
|
||
|
||
matchBgpCommunityNameExact ֠Identifies one or more BGP community ACL names
|
||
to be matched (which requires exact match).
|
||
This list of BGP community ACL names separated by one or more spaces.
|
||
|
||
matchBgpExtCommunityNumber ֠ Identifies one or more BGP community list
|
||
numbers to be matched. This is list of BGP community list numbers
|
||
separated by one or more spaces.
|
||
|
||
matchInterfaces ֠Identifies the list of IfIndices that need to be matched
|
||
in this Routemap. It means traffic from these interfaces will satisfy this
|
||
match. Value 0 matches to null0 interface.
|
||
|
||
In NetIron, supported interfaces are ethernet, pos, ve, loopback and tunnel.
|
||
Each IfIndex is a 32-bit integer in big endian order.
|
||
One or more Interface IfIndices can be specified by separating each
|
||
IfIndex by one or more spaces.
|
||
|
||
matchIpv4AddressAclNames ֠Matches Ipv4 address of route.
|
||
Identifies the list of Ipv4 standard or extended ACL names to be matched.
|
||
The value is list of ACL names separated by one or more spaces.
|
||
|
||
matchIpv4AddressAclNumbers ֠Matches Ipv4 address of route.
|
||
Identifies the list of Ipv4 ACL numbers to be matched.
|
||
The value is list of ACL numbers separated by one or more spaces.
|
||
|
||
matchIpv4AddressPrefixList ֠Matches Ipv4 address of route. Identifies
|
||
the list of Ipv4 prefix-lists to be matched.
|
||
The value is list of IPv4 prefix-list names separated by one or more spaces.
|
||
|
||
matchIpv4NextHopAclNames ֠Matches next hop Ipv4 address of route.
|
||
Identifies the list of Ipv4 standard or extended ACL names to be matched.
|
||
The value is list of ACL names separated by one or more spaces.
|
||
|
||
matchIpv4NextHopAclNumbers ֠ Matches next hop Ipv4 address of route.
|
||
Identifies the list of Ipv4 ACL numbers to be matched.
|
||
The value is list of ACL numbers separated by one or more spaces.
|
||
|
||
matchIpv4NextHopPrefixList ֠Matches next hop Ipv4 address of route.
|
||
Identifies the list of Ipv4 prefix-lists to be matched.
|
||
The value is list of IPv4 prefix-list names separated by one or more spaces.
|
||
|
||
matchIpv4RouteSourceAclNames ֠Matches advertising source Ipv4 address of
|
||
route.Identifies the list of Ipv4 standard or extended ACL names to be matched.
|
||
The value is list of ACL names separated by one or more spaces.
|
||
|
||
matchIpv4RouteSourceAclNumbers ֠ Matches advertising source Ipv4
|
||
address of route.Identifies the list of Ipv4 ACL numbers to be matched.
|
||
The value is list of ACL numbers separated by one or more spaces.
|
||
|
||
matchIpv4RouteSourcePrefixList ֠Matches advertising source Ipv4
|
||
address of route. Identifies the list of Ipv4 prefix-lists to be matched.
|
||
The value is list of IPv4 prefix-list names separated by one or more spaces.
|
||
|
||
matchIpv6AddressAclNames ֠Matches Ipv6 address of route. Identifies
|
||
the list of Ipv6 ACL names to be matched. The value is list of ACL names
|
||
separated by one or more spaces.
|
||
|
||
matchIpv6AddressPrefixList ֠Matches Ipv6 address of route. Identifies the
|
||
list of Ipv6 prefix-lists to be matched. The value is list of IPv6 prefix-list
|
||
names separated by one or more spaces.
|
||
|
||
matchIpv6NextHopPrefixList ֠Matches next hop Ipv6 address of route.
|
||
Identifies the list of Ipv6 prefix-lists to be matched. The value is
|
||
list of IPv6 prefix-list names separated by one or more spaces.
|
||
|
||
matchIpv6RouteSourcePrefixList ֠Matches advertising source Ipv6 address
|
||
of route. Identifies the list of Ipv6 prefix-lists to be matched. The value
|
||
is list of IPv6 prefix-list names separated by one or more spaces.
|
||
|
||
matchMetric ֠Specifies the route metric to be used for the match.
|
||
Value is string representation of the decimal metric value. Agent
|
||
will do ascii to integer conversion before using this value.
|
||
|
||
matchRoutingProtocol ֠Specifies the routing protocol to be used for
|
||
the match. Value is string representation of one of the following decimal
|
||
values. static-BGP(1), iBGP(2), eBGP(3), non-staticBGP(4), isisLevel1(5), isisLevel2(6),
|
||
isis(7),rip(8),static(9). The other values are not supported. The agent will do ascii to
|
||
integer conversion before using this value.
|
||
|
||
matchRouteType ֠Specifies the route type to be used for the match.
|
||
Value is string representation of one of the following decimal values.
|
||
ospfExternalType1(2), ospfExternalType2(3), ospfInternal(4), isisLevel1(5),
|
||
isisLevel2(6). The other values are not supported. The agent will do ascii
|
||
to integer conversion before using this value.
|
||
|
||
matchTags ֠Specifies list of tag values to be matched (string
|
||
representation of decimal values) Each tag value is separated by one
|
||
or more spaces. There cannot be more than 16 values."
|
||
::= {brcdRouteMapMatchEntry 3}
|
||
|
||
brcdRouteMapMatchCliString OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This is read-only object. This object is for informative purpose only.
|
||
For a pair of brcdRouteMapMatchType and brcdRouteMapMatchValue, this object
|
||
represents equivalent CLI routemap match command."
|
||
::= {brcdRouteMapMatchEntry 4}
|
||
|
||
brcdRouteMapMatchRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Setting this object to createAndGo(4) results in addition of new row.
|
||
Setting this object to destroy( 6)results in removal of a row.
|
||
The value active(1) is returned for get and get-next requests.
|
||
Other values in the enumeration are not used."
|
||
::= { brcdRouteMapMatchEntry 5 }
|
||
|
||
--
|
||
-- RouteMap Set Clause Config Table for a given routemap.
|
||
--
|
||
|
||
brcdRouteMapSetTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF BrcdRouteMapSetEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RouteMap Set Clause Config Table for a given routemap."
|
||
::= { brcdRouteMapConfig 3 }
|
||
|
||
brcdRouteMapSetEntry OBJECT-TYPE
|
||
SYNTAX BrcdRouteMapSetEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A row in this table represents a routemap set clause entry.
|
||
Before creating an instance row in this table using a name, a
|
||
corresponding entry with that name needs to be existing in the
|
||
brcdRouteMapTable."
|
||
INDEX {brcdRouteMapName,brcdRouteMapSequence, brcdRouteMapSetSequence, brcdRouteMapSetType }
|
||
::= { brcdRouteMapSetTable 1 }
|
||
|
||
BrcdRouteMapSetEntry ::= SEQUENCE {
|
||
brcdRouteMapSetSequence
|
||
Integer32,
|
||
brcdRouteMapSetType
|
||
INTEGER,
|
||
brcdRouteMapSetValue
|
||
DisplayString,
|
||
brcdRouteMapSetCliString
|
||
DisplayString,
|
||
brcdRouteMapSetRowStatus
|
||
RowStatus
|
||
}
|
||
|
||
brcdRouteMapSetSequence OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object identifies the position in this table where this
|
||
match rule is added. This is running integer. If the
|
||
brcdRouteMapSetRowStatus is createAndGo then the row is inserted
|
||
if there is no match rule is present at brcdRouteMapSetIndex
|
||
position. If there is a rule present it should be of same kind.
|
||
If not then the set request fails. Application can obtain value
|
||
for this object in the last row and use the next value to insert
|
||
a new row in this table."
|
||
::= { brcdRouteMapSetEntry 1}
|
||
|
||
brcdRouteMapSetType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
setUnDefinedType(0),
|
||
setAsPath(1),
|
||
setAutomaticTag(2),
|
||
setDeleteCommunityList(3),
|
||
setCommunityNumber(4),
|
||
setCommunityFlag(5),
|
||
setDampening(6),
|
||
setDistance(7),
|
||
setExtCommunityRT(8),
|
||
setExtCommunityRTAdditive(9),
|
||
setExtCommunitySOO(10),
|
||
setOutputInterfaces(11),
|
||
setNextHopIpv4Addr(12),
|
||
setNextHopIpv4AddrWithPreserveVlan(13),
|
||
setNextHopIpv6Addr(14),
|
||
setNextHopIpv6AddrWithPreserveVlan(15),
|
||
setNextHopIpPeerAddr(16),
|
||
setIsisLevel(17),
|
||
setLocalPreference(18),
|
||
setMetricType(19),
|
||
setMetric(20),
|
||
setNextHopFloodVlan(21),
|
||
setNextHopFloodVlanPreserveVlan(22),
|
||
setNextHopFloodVlanOutgoingDa(23),
|
||
setNextHopIpTunnel(24),
|
||
setNextHopLsp(25),
|
||
setBgpOrigin(26),
|
||
setTag(27),
|
||
setWeight(28)
|
||
}
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A pair of brcdRouteMapSetType and brcdRouteMapSetValue objects
|
||
specifies a particular set clause."
|
||
::= { brcdRouteMapSetEntry 2}
|
||
|
||
brcdRouteMapSetValue OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object specifies the value corresponding to the
|
||
brcdRouteMapSetType.
|
||
setAsPath ֠Identifies the prepend string for BGP AS path attribute.
|
||
The value is the string representation of BGP AS number to be
|
||
prepended with the AS Path.
|
||
If the value specified is the string ҴagҠinstead of the AS path
|
||
number then itwill set the tag as an AS path attribute.
|
||
|
||
setAutomaticTag ֠Specifies that the routemap tag is to be computed
|
||
automatically. Value is string representation of a truth value 1.
|
||
This object will not be present if it is not configured. Truth value
|
||
of 0 can be used to mark its deletion.
|
||
|
||
setDeleteCommunityList ֠Specifies the name of the BGP community
|
||
List to be set for deletion.
|
||
|
||
setCommunityNumber ֠Specifies the BGP community number to be added.
|
||
Format is either ӁA:NNҠor '<community number>'.
|
||
|
||
setCommunityFlag ֠This value relates to setCommunityNumber. It
|
||
specifies that the BGP community in setCommunityNumber have the
|
||
following behavior noExport(1),noAdvertise(2), localAs(3),additive(4).
|
||
The value is string representation of one of the above decimal values.
|
||
For additive(4), the value is followed by the community number in either
|
||
'AA:NN' or <community number> format.
|
||
|
||
setDampening ֠It consists of four values separated by space.
|
||
The first value specifies the string representation of decimal value
|
||
for BGP route flap dampening. It should be enabled with half-time in
|
||
minutes for the penalty. Default value is 15 minutes. Valid range is
|
||
1-45.
|
||
The second value relates to the 1st value and specifies the string
|
||
representation of the value to start reusing a BGP route. Default is
|
||
750, with each flap penalty as 1000. Valid range is 1-20000.
|
||
The third value relates to the 1st value and specifies the string
|
||
representation of value to start suppressing a BGP route. Default
|
||
is 2000, with each flap penalty as 1000. Valid range is 1-20000.
|
||
The Fourth value relates to the 1st value and specifies the string
|
||
representation of maximum duration in minutes to suppress a stable
|
||
route. Default is 40. Valid range is 1-255.
|
||
If a value is not provided then the default value will be picked up.
|
||
|
||
setDistance ֠Specifies the string representation of admin distance to
|
||
be set for matching OSPF routes.
|
||
|
||
setExtCommunityRT ֠Specifies one or more (separated by space) VPN
|
||
extended community attributes. Each VPN community is of format ҁSN:nnҮ
|
||
|
||
setExtCommunityRTAdditive ֠This object is related to earlier object
|
||
setExtCommunityRT. It specifies that the VPN communities in earlier
|
||
should be added to the existing extended community.
|
||
|
||
setExtCommunitySOO ֠Specifies site-of-origin VPN extended community attributes. The VPN community is
|
||
of format ҁSN:nnҮ
|
||
|
||
setOutputInterfaces ֠Identifies the list of output IfIndices.
|
||
Value 0 matches to null0 interface. Each IfIndex is a 32-bit integer in
|
||
big endian order. One or more Interface IfIndices can be specified by
|
||
separating each IfIndex by one or more spaces. If the ifIndex is not
|
||
null0 then the preserve-vlan flag is mandatory and which is always
|
||
implicitly set.
|
||
|
||
setNextHopIpv4Addr ֠Identifies the string representation of the next
|
||
hop ipv4 address without preserve vlan flag.
|
||
|
||
setNextHopIpv4AddrWithPreserveVlan ֠Identifies the string
|
||
representation of the next hop ipv4 address with preserve vlan flag.
|
||
|
||
setNextHopIpv6Addr ֠Identifies the string representation of the next
|
||
hop ipv6 address without preserve vlan flag.
|
||
|
||
setNextHopIpv6AddrWithPreserveVlan ֠Identifies the string representation
|
||
of the next hop ipv6 address with preserve vlan flag.
|
||
|
||
setNextHopIpPeerAddr ֠The value is string representation of truth value.
|
||
Identifies that the next hop is BGP IPv4 peer address. When set to Ѱҍ
|
||
this object is deleted.
|
||
|
||
setIsisLevel ֠Identifies the level to which the ISIS route to import.
|
||
The value is string representation of one of the following decimal values,
|
||
level1(1), level2(2) level1or2(3).
|
||
|
||
setLocalPreference ֠Identifies the BGP local preference path attribute
|
||
value to be set. The value is string representation of the decimal
|
||
preference value.
|
||
|
||
setMetricType ֠Specifies the route metric type for the destination
|
||
routing protocol. Value is string representation of one of the
|
||
following internal(1), external(2), type1(3), type2(4).
|
||
|
||
setMetric ֠Specifies the metric value set for the destination routing
|
||
protocol. Value is string representation of the following:
|
||
<n>: Metric value
|
||
+<n>: Add <n> to metric
|
||
-<n>: Subtract <n> to metric
|
||
None: remove metric value
|
||
|
||
setNextHopFloodVlan ֠Specifies the next hop vlan without preserve vlan
|
||
to be set. Value is string representation of vlan Id (1-4090)
|
||
|
||
setNextHopFloodVlanPreserveVlan ֠Specifies the next hop vlan with preserve
|
||
vlan to be set. Value is string representation of vlan Id (1-4090)
|
||
|
||
setNextHopFloodVlanOutgoingDa ֠Specifies the next hop vlan with outgoing
|
||
destination address flag set. Value is string representation of vlan id (1-4090)
|
||
followed with MAC address.
|
||
|
||
setNextHopIpTunnel ֠ Specifies the next hop IP tunnel, it can only be
|
||
configured for configured GRE tunnels. The value is string representation
|
||
of decimal tunnel ID
|
||
|
||
setNextHopLsp ֠Specifies the next hop LSP name.
|
||
|
||
setBgpOrigin ֠Specifies the BGP origin code. The value is string
|
||
representation of one the following decimal value, igp(1), incomplete(2)
|
||
|
||
setTag ֠Specifies the string representation of the decimal tag value
|
||
for the destination routing protocol.
|
||
|
||
setWeight ֠Specifies the string representation of the decimal value for
|
||
BGP weight for the routing table."
|
||
::= { brcdRouteMapSetEntry 3}
|
||
|
||
brcdRouteMapSetCliString OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This is read-only object. This object is for informative purpose only.
|
||
For a pair of brcdRouteMapSetType and brcdRouteMapSetValue, this object
|
||
represents equivalent CLI routemap set command."
|
||
::= {brcdRouteMapSetEntry 4}
|
||
|
||
brcdRouteMapSetRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Setting this object to createAndGo(4) results in addition of new row.
|
||
Setting this object to destroy( 6)results in removal of a row. The
|
||
value active(1) is returned for get and get-next requests. Other
|
||
values in the enumeration are not used."
|
||
::= { brcdRouteMapSetEntry 5 }
|
||
|
||
--
|
||
-- RouteMap Bind Configuration Table
|
||
--
|
||
-- ip policy route-map <name>
|
||
|
||
brcdRouteMapBindTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF BrcdRouteMapBindEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table contains the bindings for routemap entries to interfaces.
|
||
Only one route map can be bounded to a given interface. Attempting
|
||
to bind a second routemap to the same interface will return an error."
|
||
::= { brcdRouteMapConfig 4 }
|
||
|
||
brcdRouteMapBindEntry OBJECT-TYPE
|
||
SYNTAX BrcdRouteMapBindEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A row in this table represents a binding of a routemap to one interface."
|
||
INDEX { brcdRouteMapBindIfIndex, brcdRouteMapBindIpType }
|
||
::= { brcdRouteMapBindTable 1 }
|
||
|
||
BrcdRouteMapBindEntry ::= SEQUENCE {
|
||
brcdRouteMapBindIfIndex
|
||
InterfaceIndex,
|
||
brcdRouteMapBindIpType
|
||
InetAddressType,
|
||
brcdRouteMapBindMapName
|
||
DisplayString,
|
||
brcdRouteMapBindRowStatus
|
||
RowStatus
|
||
}
|
||
|
||
brcdRouteMapBindIfIndex OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the interface to bind a routemap.
|
||
The interface can only be of type physical or virtual."
|
||
::= { brcdRouteMapBindEntry 1 }
|
||
|
||
brcdRouteMapBindIpType OBJECT-TYPE
|
||
SYNTAX InetAddressType
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the IP type for the bind. Route map can be
|
||
bound only to ipv4 or ipv6 policy."
|
||
::= {brcdRouteMapBindEntry 2}
|
||
|
||
brcdRouteMapBindMapName OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the route map name.
|
||
In NetIron, the name can have max 80 characters."
|
||
|
||
::= { brcdRouteMapBindEntry 3 }
|
||
|
||
brcdRouteMapBindRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Setting this object to createAndGo(4) results in addition
|
||
of new row. Setting this object to destroy( 6)results in
|
||
removal of a row. The value active(1) is returned for
|
||
get and get-next requests.
|
||
Other values in the enumeration are not used. Once created,
|
||
a row cannot be modified"
|
||
::= { brcdRouteMapBindEntry 4 }
|
||
|
||
--
|
||
-- RouteMap Show Rule Table
|
||
--
|
||
-- show telemetry route-map [rule-name]
|
||
|
||
brcdRMapRuleDisplayTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF BrcdRMapRuleDisplayEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This table contains the various route map rule entries.
|
||
A routemap rule instance (map and sequence number) can
|
||
have only one rule name. The same rule name could be
|
||
applied to multiple routemaps"
|
||
::= { brcdRouteMapShow 1 }
|
||
|
||
brcdRMapRuleDisplayEntry OBJECT-TYPE
|
||
SYNTAX BrcdRMapRuleDisplayEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A row in this table represents a route map rule entry."
|
||
INDEX { brcdRMapRuleDisplayRuleName,
|
||
brcdRMapRuleDisplayRouteMapName,
|
||
brcdRMapRuleDisplaySequence,
|
||
brcdRMapRuleDisplayIpType
|
||
}
|
||
::= { brcdRMapRuleDisplayTable 1 }
|
||
|
||
BrcdRMapRuleDisplayEntry ::= SEQUENCE {
|
||
brcdRMapRuleDisplayRuleName
|
||
DisplayString,
|
||
brcdRMapRuleDisplayRouteMapName
|
||
DisplayString,
|
||
brcdRMapRuleDisplaySequence
|
||
Unsigned32,
|
||
brcdRMapRuleDisplayIpType
|
||
InetAddressType,
|
||
brcdRMapRuleDisplayInputInterfaceList
|
||
DisplayString,
|
||
brcdRMapRuleDisplayAclMatchFilter
|
||
DisplayString,
|
||
brcdRMapRuleDisplayOutputVlan
|
||
DisplayString,
|
||
brcdRMapRuleDisplayOutputPort
|
||
DisplayString,
|
||
brcdRMapRuleDisplayOutputIPAddress
|
||
DisplayString
|
||
}
|
||
|
||
brcdRMapRuleDisplayRuleName OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the rule name."
|
||
::= { brcdRMapRuleDisplayEntry 1 }
|
||
|
||
brcdRMapRuleDisplayRouteMapName OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the route map that has this rule."
|
||
::= { brcdRMapRuleDisplayEntry 2 }
|
||
|
||
brcdRMapRuleDisplaySequence OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the instance sequence number."
|
||
::= { brcdRMapRuleDisplayEntry 3 }
|
||
|
||
brcdRMapRuleDisplayIpType OBJECT-TYPE
|
||
SYNTAX InetAddressType
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the IP type for the Rule Display (1(ipv4), or 2(ipv6)).
|
||
A row is present if the corresponding ipv4 or ipv6 AclMatchFilter
|
||
is present."
|
||
::= { brcdRMapRuleDisplayEntry 4 }
|
||
|
||
brcdRMapRuleDisplayInputInterfaceList OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of space separated interface indices which are the
|
||
port membership of this rule. An * here means the path is
|
||
configured but disabled."
|
||
::= { brcdRMapRuleDisplayEntry 5 }
|
||
|
||
brcdRMapRuleDisplayAclMatchFilter OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The list of space separated ACL match filters name or number used
|
||
in this rule."
|
||
::= { brcdRMapRuleDisplayEntry 6 }
|
||
|
||
brcdRMapRuleDisplayOutputVlan OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Identifies the next-hop-flood VLAN selected (by the interface
|
||
card). Empty string will be returned if there is no value."
|
||
::= { brcdRMapRuleDisplayEntry 7 }
|
||
|
||
brcdRMapRuleDisplayOutputPort OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of space separated egress interfaces selected (by the interface card).
|
||
Empty string will be returned if there is no value."
|
||
::= { brcdRMapRuleDisplayEntry 8 }
|
||
|
||
|
||
brcdRMapRuleDisplayOutputIPAddress OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of space separated selected IPv4 next-hop or
|
||
IPv6 next-hop address.Empty string will be returned if there is no value."
|
||
::= { brcdRMapRuleDisplayEntry 9 }
|
||
END
|