Observium_CE/mibs/bintec/BINTEC-VMS-MIB

719 lines
22 KiB
Plaintext

-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00
---------------------------------------------------------------------------
-- (C)opyright 2011-2014 bintec elmeg GmbH
-- $RCSfile: mib-vms,v $
-- $Revision: 1.19 $
-- $Date: 2014-07-23 13:14:43 $
-- Author: awimmer
---------------------------------------------------------------------------
BINTEC-VMS-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises
FROM RFC1155-SMI
IpAddress, enterprises
FROM RFC1155-SMI
MacAddress, DisplayString, TimeStamp, TruthValue
FROM SNMPv2-TC
bibo, Date, BitValue
FROM BINTEC-MIB
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Counter64, TimeTicks
FROM SNMPv2-SMI
TRAP-TYPE
FROM RFC-1215
TruthValue
FROM SNMPv2-TC
ifIndex
FROM IF-MIB
OBJECT-TYPE
FROM RFC-1212
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
vmsAdminMIB MODULE-IDENTITY
LAST-UPDATED "201407230000Z"
ORGANIZATION "bintec elmeg GmbH"
CONTACT-INFO
"EMail: info@bintec-elmeg.com
Web: www.bintec-elmeg.com
"
DESCRIPTION
"The MIB module for voice mail server configuration."
REVISION "201101250000Z"
DESCRIPTION
"Initial version."
::= { bibo 34 }
vms OBJECT IDENTIFIER
::= { vmsAdminMIB 1 }
---------------------------------------------------------------------------
-- vms types
AccountIndex ::= INTEGER (1..65535)
---------------------------------------------------------------------------
-- **********************************************************************
-- * vmsGlobalAdmTable TABLE
-- **********************************************************************
vmsGlobalAdm OBJECT IDENTIFIER
::= { vms 1 }
vmsGlobalAdmStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Activate or deactivate the voice mail system."
DEFVAL { disabled }
::= { vmsGlobalAdm 1 }
vmsGlobalAdmAccountRef OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value contains the reference to the account number of the
Voice Mail Server.
Reference to mpsExtensionIndex in mpsExtensionTable."
DEFVAL { 0 }
::= { vmsGlobalAdm 2 }
vmsGlobalAdmSipPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UDP port number used for (system internal) SIP connect."
DEFVAL { 5070 }
::= { vmsGlobalAdm 3 }
vmsGlobalAdmLanguage OBJECT-TYPE
SYNTAX INTEGER {
german(1),
dutch(2),
english(3),
italian(5),
spanish(7),
french(10),
portuguese(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global language setting for the voice mail server."
DEFVAL { german }
::= { vmsGlobalAdm 4 }
vmsGlobalAdmSmtpServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the SMTP server.
This object may contain either an IP address or a domain name."
::= { vmsGlobalAdm 5 }
vmsGlobalAdmSmtpPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port to be used in order to connect to vmsGlobSmtpServer."
DEFVAL { 25 }
::= { vmsGlobalAdm 6 }
vmsGlobalAdmSmtpFrom OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sender adress, e.g. voicemail@thecompany.com."
::= { vmsGlobalAdm 7 }
vmsGlobalAdmSmtpUser OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP account/user name."
::= { vmsGlobalAdm 8 }
vmsGlobalAdmSmtpPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP password."
::= { vmsGlobalAdm 9 }
vmsGlobalAdmFileAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
create(2),
remove(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"File admin status:
idle(1) : no action
create(2): new wave files shall be stored on the storage device
remove(3): files shall be deleted on the storage device"
DEFVAL { idle }
::= { vmsGlobalAdm 10 }
vmsGlobalAdmFileOperStatus OBJECT-TYPE
SYNTAX INTEGER {
unavailable(1),
inProgress(2),
available(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"File oper status:
unavailable(1): Ann. wave files not yet available on the storage device
inProgress(2) : Create or remove file just in progress
available(3) : synchronization of storage device with MIB is done."
DEFVAL { unavailable }
::= { vmsGlobalAdm 11 }
vmsGlobalAdmMaxLifeTime OBJECT-TYPE
SYNTAX INTEGER(10..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum life time of messages in days. After this time a message can
be displaced by a new message."
DEFVAL { 60 }
::= { vmsGlobalAdm 12 }
-- **********************************************************************
-- * vmsGlobalStatusTable TABLE
-- **********************************************************************
vmsGlobalStatus OBJECT IDENTIFIER
::= { vms 2 }
vmsGlobalStatusAccountDir OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains the directory of the account data,
This value will be changed by the system."
::= { vmsGlobalStatus 1 }
vmsGlobalStatusWaveDir OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains the directory of the wave files,
This value will be changed by the system."
::= { vmsGlobalStatus 2 }
vmsGlobalStatusFileUploadResult OBJECT-TYPE
SYNTAX INTEGER {
success(1),
no-mem-card(2),
no-mem-space(3),
incomp-format(4),
transfer-error(5),
write-protection(6),
internal-error(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"file upload result (error) code:
success(1) : the file upload was successful,
no-mem-card(2) : no memory card plugged,
no-mem-space(3) : no more space available on the memory card,
incomp-format(4) : the file format doesn't match the requirements,
transfer-error(5) : any transfer error occured during upload,
write-protection(6): active write protection on storage device,
internal-error(7) : unexpected internal error occured."
DEFVAL { success }
::= { vmsGlobalStatus 3 }
-- **********************************************************************
-- * vmsAccountTable TABLE
-- **********************************************************************
vmsAccountTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmsAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the Voice Account configured for
VMS call redirect.
"
::= { vms 3 }
vmsAccountEntry OBJECT-TYPE
SYNTAX VmsAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { vmsAccountIndex }
::= { vmsAccountTable 1 }
VmsAccountEntry ::=
SEQUENCE {
vmsAccountIndex AccountIndex,
vmsAccountType INTEGER,
vmsAccountReference INTEGER,
vmsAccountLanguage INTEGER,
vmsAccountNotify INTEGER,
vmsAccountMailTo DisplayString,
vmsAccountMaxRecordingLength INTEGER,
vmsAccountCalendarIndex INTEGER,
vmsAccountAdminStatus INTEGER,
vmsAccountOperStatus INTEGER,
vmsAccountNewMessages INTEGER,
vmsAccountOldMessages INTEGER,
vmsAccountSavedMessages INTEGER,
vmsAccountMaxMessages INTEGER
}
vmsAccountIndex OBJECT-TYPE
SYNTAX AccountIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A unique value for each Account."
::= { vmsAccountEntry 1 }
vmsAccountType OBJECT-TYPE
SYNTAX INTEGER {
extension(1),
group(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of account: group or extension."
DEFVAL { extension }
::= { vmsAccountEntry 2 }
vmsAccountReference OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value contains a reference for the voice mail account,
it depends on vmsAccountType:
- vmsAccountType extension: reference to mpsExtensionTable
- vmsAccountType group : reference to mpsGroupTable
."
DEFVAL { 0 }
::= { vmsAccountEntry 3 }
vmsAccountLanguage OBJECT-TYPE
SYNTAX INTEGER {
german(1),
dutch(2),
english(3),
italian(5),
spanish(7),
french(10),
portuguese(11),
use-default(99)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The account-specific language setting for the voice mail server.
use-default(99): use language setting from vmsGlobalLanguage."
DEFVAL { use-default }
::= { vmsAccountEntry 4 }
vmsAccountNotify OBJECT-TYPE
SYNTAX INTEGER {
no(1),
mail(2),
mail-attachment(3),
use-user-config(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the (admin) mail notification mode:
no(1) : no mail is sent
mail(2) : send a mail without attachment
mail-attachment(3): send a mail with the new message attached
use-user-config(4): use settings from vmsAccountUserNotify
"
DEFVAL { no }
::= { vmsAccountEntry 5 }
vmsAccountMailTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the notification recipient.
If not defined use mail address from mpsUserTable."
::= { vmsAccountEntry 6 }
vmsAccountMaxRecordingLength OBJECT-TYPE
SYNTAX INTEGER (5..300)
UNITS "s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum recording length (in seconds) of the messages for this
account."
DEFVAL { 180 }
::= { vmsAccountEntry 7 }
vmsAccountCalendarIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The announcement business or outside business can be switched
automatically by a calendar.
This is the reference to mpsCalendarTable if active."
DEFVAL { 0 }
::= { vmsAccountEntry 8 }
vmsAccountAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enable(1), delete(2), disable(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable, disable or delete VMS account."
DEFVAL { enable }
::= { vmsAccountEntry 9 }
vmsAccountOperStatus OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2), licMissing(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational status of the account."
DEFVAL { down }
::= { vmsAccountEntry 10 }
vmsAccountNewMessages OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains the number of new messages
for this account.
"
DEFVAL { 0 }
::= { vmsAccountEntry 11 }
vmsAccountOldMessages OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains the number of old messages
for this account.
"
DEFVAL { 0 }
::= { vmsAccountEntry 12 }
vmsAccountSavedMessages OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains the number of saved messages
for this account.
"
DEFVAL { 0 }
::= { vmsAccountEntry 13 }
vmsAccountMaxMessages OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value contains the maximum number of allowed messages
for this account. If this amount is reached, no more
recordings are possible.
"
DEFVAL { 60 }
::= { vmsAccountEntry 14 }
-- **********************************************************************
-- * vmsAccountUserTable TABLE
-- **********************************************************************
vmsAccountUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmsAccountUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the Voice Account User configured for
VMS call redirect.
"
::= { vms 4 }
vmsAccountUserEntry OBJECT-TYPE
SYNTAX VmsAccountUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { vmsAccountUserIndex }
::= { vmsAccountUserTable 1 }
VmsAccountUserEntry ::=
SEQUENCE {
vmsAccountUserIndex AccountIndex,
vmsAccountUserPin DisplayString,
vmsAccountUserMode INTEGER,
vmsAccountUserFacilities BITS,
vmsAccountUserBusinessType INTEGER,
vmsAccountUserOutBusinessType INTEGER,
vmsAccountUserAdminStatus INTEGER,
vmsAccountUserNotify INTEGER
}
vmsAccountUserIndex OBJECT-TYPE
SYNTAX AccountIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A unique value for each Account User Entry."
::= { vmsAccountUserEntry 1 }
vmsAccountUserPin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PIN for access to this account.
If no PIN defined, then use PIN from mpsUserTable."
::= { vmsAccountUserEntry 2 }
vmsAccountUserMode OBJECT-TYPE
SYNTAX INTEGER {
business(1),
outsideBusiness(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value contains the active mode of the voice box.
It simply chooses the announcement type the VMS shall use.
This item can be changed by several means, for instance calendar
or web user portal."
DEFVAL { business }
::= { vmsAccountUserEntry 3 }
vmsAccountUserFacilities OBJECT-TYPE
SYNTAX BITS {
pin-less-access(0),
file-move-after-email(1),
file-delete-after-email(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Facility settings for the VMS account:
pin-less-access: no PIN check for call of voice box owner.
file-move-after-email: new messages are moved to old folder after
email notification
file-delete-after-email: delete file after successful email notification"
::= { vmsAccountUserEntry 4 }
vmsAccountUserBusinessType OBJECT-TYPE
SYNTAX INTEGER {
annOnly(1),
annAndRec(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Voice Box usage within business time.
annOnly: Announcement only (infobox)
annAndRec: Announcement and recording
"
DEFVAL { annAndRec }
::= { vmsAccountUserEntry 5 }
vmsAccountUserOutBusinessType OBJECT-TYPE
SYNTAX INTEGER {
annOnly(1),
annAndRec(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Voice box usage outside business time.
annOnly: Announcement only (infobox)
annAndRec: Announcement and recording
"
DEFVAL { annOnly }
::= { vmsAccountUserEntry 6 }
vmsAccountUserAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enable(1), delete(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Just for MIB entry deletion."
DEFVAL { enable }
::= { vmsAccountUserEntry 7 }
vmsAccountUserNotify OBJECT-TYPE
SYNTAX INTEGER {
no(1),
mail(2),
mail-attachment(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the (user) mail notification mode:
no(1) : no mail is sent
mail(2) : send a mail without attachment
mail-attachment(3): send a mail with the new message attached
"
DEFVAL { no }
::= { vmsAccountUserEntry 8 }
-- **********************************************************************
-- * vmsMessageTable TABLE
-- **********************************************************************
vmsMessageTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmsMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the received messages."
::= { vms 5 }
vmsMessageEntry OBJECT-TYPE
SYNTAX VmsMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { vmsMessageIndex }
::= { vmsMessageTable 1 }
VmsMessageEntry ::=
SEQUENCE {
vmsMessageIndex INTEGER,
vmsMessageAccountIdx AccountIndex,
vmsMessageCaller DisplayString,
vmsMessageReceived Date,
vmsMessageFile DisplayString,
vmsMessageStatus INTEGER,
vmsMessageAdminStatus INTEGER,
vmsMessageAccessStatus BITS
}
vmsMessageIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique Index of the received message."
::= { vmsMessageEntry 1 }
vmsMessageAccountIdx OBJECT-TYPE
SYNTAX AccountIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of the associated Voice extension (reference to the
vmsAccountTable)."
::= { vmsMessageEntry 2 }
vmsMessageCaller OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Originator of the message."
::= { vmsMessageEntry 3 }
vmsMessageReceived OBJECT-TYPE
SYNTAX Date
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time and Date of the message."
::= { vmsMessageEntry 4 }
vmsMessageFile OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Message file name."
::= { vmsMessageEntry 5 }
vmsMessageStatus OBJECT-TYPE
SYNTAX INTEGER {
new(1),
old(2),
saved(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the messages.
new(1) : new unheard message
old(2) : heard message
saved(3): message was heared and saved"
DEFVAL { new }
::= { vmsMessageEntry 6 }
vmsMessageAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
move-to-old(2),
move-to-saved(3),
delete(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Admin status of the messages.
enabled(1): no action for this message active
move-to-old(2): new message should be moved to old
move-to-saved(3): now/old message should be moved to saved
delete(4) : message should be deleted"
DEFVAL { enabled }
::= { vmsMessageEntry 7 }
vmsMessageAccessStatus OBJECT-TYPE
SYNTAX BITS {
playing(0),
sending(1),
recording(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Access flags.
playing : read access for playing
sending : read access for sending e-mail
recording: write access for recording"
::= { vmsMessageEntry 8 }
END