522 lines
18 KiB
Plaintext
522 lines
18 KiB
Plaintext
ALCATEL-IND1-PCAM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Counter64, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
hardentIND1Pcam
|
|
FROM ALCATEL-IND1-BASE;
|
|
|
|
alcatelIND1PCAMMIB MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "200704030000Z"
|
|
ORGANIZATION "Alcatel-Lucent"
|
|
CONTACT-INFO
|
|
"Please consult with Customer Service to ensure the most appropriate
|
|
version of this document is used with the products in question:
|
|
|
|
Alcatel-Lucent, Enterprise Solutions Division
|
|
(Formerly Alcatel Internetworking, Incorporated)
|
|
26801 West Agoura Road
|
|
Agoura Hills, CA 91301-5122
|
|
United States Of America
|
|
|
|
Telephone: North America +1 800 995 2696
|
|
Latin America +1 877 919 9526
|
|
Europe +31 23 556 0100
|
|
Asia +65 394 7933
|
|
All Other +1 818 878 4507
|
|
|
|
Electronic Mail: support@ind.alcatel.com
|
|
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
|
|
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
|
|
|
DESCRIPTION
|
|
"This module describes an authoritative enterprise-specific Simple
|
|
Network Management Protocol (SNMP) Management Information Base (MIB):
|
|
|
|
This MIB contains management information for Coronado Layer
|
|
3 Hardware Routing Engine (HRE) management.
|
|
|
|
The right to make changes in specification and other information
|
|
contained in this document without prior notice is reserved.
|
|
|
|
No liability shall be assumed for any incidental, indirect, special, or
|
|
consequential damages whatsoever arising from or related to this
|
|
document or the information contained herein.
|
|
|
|
Vendors, end-users, and other interested parties are granted
|
|
non-exclusive license to use this specification in connection with
|
|
management of the products for which it is intended to be used.
|
|
|
|
Copyright (C) 1995-2007 Alcatel-Lucent
|
|
ALL RIGHTS RESERVED WORLDWIDE"
|
|
|
|
REVISION "200704030000Z"
|
|
DESCRIPTION
|
|
"The latest version of this MIB Module."
|
|
|
|
::= { hardentIND1Pcam 1 }
|
|
|
|
alcatelIND1PCAMMIBObjects OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "Branch for Coronado Layer 3 HRE Managed Objects."
|
|
::= {alcatelIND1PCAMMIB 1}
|
|
|
|
alcatelIND1PCAMMIBConformance OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "Branch for Coronado Layer 3 HRE Conformance Information."
|
|
::= {alcatelIND1PCAMMIB 2}
|
|
|
|
alcatelIND1PCAMMIBGroups OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "Branch for Coronado Layer 3 HRE Units of Conformance."
|
|
::= {alcatelIND1PCAMMIBConformance 1}
|
|
|
|
alcatelIND1PCAMMIBCompliances OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "Branch for Coronado Layer 3 HRE Compliance Statements."
|
|
::= {alcatelIND1PCAMMIBConformance 2}
|
|
|
|
CoroL3HashFunction ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "An HRE hash function maps a value to be hashed to a hash
|
|
index by selecting a sub-set of the bits in the hashed value
|
|
and concatenating them together. This field describes a
|
|
hash function by identifying in a bit mask those bit positions
|
|
in the value to be hashed that should be selected and concatenated
|
|
to form the hash index."
|
|
SYNTAX OCTET STRING (SIZE(10))
|
|
|
|
alaCoroL3HrePerModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoroL3HrePerModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The statistics and configurable data for a Coronado L3 HRE mode."
|
|
::= {alcatelIND1PCAMMIBObjects 1}
|
|
|
|
alaCoroL3HrePerModeTableEntry OBJECT-TYPE
|
|
SYNTAX CoroL3HrePerModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry corresponds to a single mode for a single Coronado."
|
|
INDEX { alaCoroL3HrePerModeSlotNumber,
|
|
alaCoroL3HrePerModeSliceNumber,
|
|
alaCoroL3HrePerModeModeNumber }
|
|
::= {alaCoroL3HrePerModeTable 1}
|
|
|
|
CoroL3HrePerModeEntry ::=
|
|
SEQUENCE {
|
|
alaCoroL3HrePerModeSlotNumber Unsigned32,
|
|
alaCoroL3HrePerModeSliceNumber Unsigned32,
|
|
alaCoroL3HrePerModeModeNumber INTEGER,
|
|
alaCoroL3HreModeHashTableSize Unsigned32,
|
|
alaCoroL3HreModeHashEntriesInUse Unsigned32,
|
|
alaCoroL3HreModeCollEntriesInUse Unsigned32,
|
|
alaCoroL3HreModeCurrentHashFunction CoroL3HashFunction,
|
|
alaCoroL3HreMaxCollChainLen Unsigned32,
|
|
alaCoroL3HreAvgCollChainLen Unsigned32
|
|
}
|
|
|
|
alaCoroL3HrePerModeSlotNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The slot number in which the Coronado resides. Valid range
|
|
will vary depending on hardware configuration."
|
|
::= {alaCoroL3HrePerModeTableEntry 1}
|
|
|
|
alaCoroL3HrePerModeSliceNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The slice number in which the Coronado resides. Valid range
|
|
will vary depending on hardware configuration."
|
|
::= {alaCoroL3HrePerModeTableEntry 2}
|
|
|
|
alaCoroL3HrePerModeModeNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Identifier for L3 HRE mode. Note that mode 3 refers to
|
|
data used for modes 3 through 5 since they share hash
|
|
function and memory space."
|
|
::= {alaCoroL3HrePerModeTableEntry 3}
|
|
|
|
alaCoroL3HreModeHashTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of hash buckets to be used for this mode. This must
|
|
be 0 or a power of 2."
|
|
::= {alaCoroL3HrePerModeTableEntry 4}
|
|
|
|
alaCoroL3HreModeHashEntriesInUse OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of hash buckets currently in use for this mode."
|
|
::= {alaCoroL3HrePerModeTableEntry 5}
|
|
|
|
alaCoroL3HreModeCollEntriesInUse OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of collision entries in use by this mode."
|
|
::= {alaCoroL3HrePerModeTableEntry 6}
|
|
|
|
alaCoroL3HreModeCurrentHashFunction OBJECT-TYPE
|
|
SYNTAX CoroL3HashFunction
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current hash function in use by this mode."
|
|
::= {alaCoroL3HrePerModeTableEntry 7}
|
|
|
|
alaCoroL3HreMaxCollChainLen OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maximum length for the collision chains in this mode."
|
|
::= {alaCoroL3HrePerModeTableEntry 8}
|
|
|
|
alaCoroL3HreAvgCollChainLen OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Average length for the collision chains in this mode."
|
|
::= {alaCoroL3HrePerModeTableEntry 9}
|
|
|
|
alaCoroL3HrePerCoronadoStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoroL3HrePerCoronadoStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The statistics for a Coronado L3 HRE."
|
|
::= {alcatelIND1PCAMMIBObjects 2}
|
|
|
|
alaCoroL3HrePerCoronadoStatsTableEntry OBJECT-TYPE
|
|
SYNTAX CoroL3HrePerCoronadoStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry corresponds to a single Coronado."
|
|
INDEX { alaCoroL3HreSlotNumber, alaCoroL3HreSliceNumber }
|
|
::= {alaCoroL3HrePerCoronadoStatsTable 1}
|
|
|
|
CoroL3HrePerCoronadoStatsEntry ::=
|
|
SEQUENCE {
|
|
alaCoroL3HreSlotNumber Unsigned32,
|
|
alaCoroL3HreSliceNumber Unsigned32,
|
|
alaCoroL3HreRouteCacheEntriesTotal Unsigned32,
|
|
alaCoroL3HreRouteCacheEntriesInUse Unsigned32,
|
|
alaCoroL3HreIpPacketsReceived Counter64,
|
|
alaCoroL3HreIpBytesReceived Counter64,
|
|
alaCoroL3HreIpPacketsForwarded Counter64,
|
|
alaCoroL3HreIpBytesForwarded Counter64,
|
|
alaCoroL3HreIpPacketsDiscarded Counter64,
|
|
alaCoroL3HreIpBytesDiscarded Counter64,
|
|
alaCoroL3HreIpPacketsFragmented Counter64,
|
|
alaCoroL3HreIpPacketsFragsGenerated Counter64,
|
|
alaCoroL3HreIpPacketsFailedToFrag Counter64,
|
|
alaCoroL3HreIpxPacketsReceived Counter64,
|
|
alaCoroL3HreIpxBytesReceived Counter64,
|
|
alaCoroL3HreIpxPacketsForwarded Counter64,
|
|
alaCoroL3HreIpxBytesForwarded Counter64,
|
|
alaCoroL3HreIpxPacketsDiscarded Counter64,
|
|
alaCoroL3HreIpxBytesDiscarded Counter64
|
|
}
|
|
|
|
alaCoroL3HreSlotNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The slot number in which the Coronado resides. Valid range
|
|
will vary depending on hardware configuration."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 1}
|
|
|
|
alaCoroL3HreSliceNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The slice number in which the Coronado resides. Valid range
|
|
will vary depending on hardware configuration."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 2}
|
|
|
|
alaCoroL3HreRouteCacheEntriesTotal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of configured route cache entries."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 3}
|
|
|
|
alaCoroL3HreRouteCacheEntriesInUse OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of route cache entries currently in-use."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 4}
|
|
|
|
alaCoroL3HreIpPacketsReceived OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IP packets received."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 5}
|
|
|
|
alaCoroL3HreIpBytesReceived OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IP bytes received."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 6}
|
|
|
|
alaCoroL3HreIpPacketsForwarded OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IP packets routed."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 7}
|
|
|
|
alaCoroL3HreIpBytesForwarded OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IP bytes routed."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 8}
|
|
|
|
alaCoroL3HreIpPacketsDiscarded OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IP packets discarded."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 9}
|
|
|
|
alaCoroL3HreIpBytesDiscarded OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IP bytes discarded."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 10}
|
|
|
|
alaCoroL3HreIpPacketsFragmented OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IP packets fragmented."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 11}
|
|
|
|
alaCoroL3HreIpPacketsFragsGenerated OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IP packet fragments generated."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 12}
|
|
|
|
alaCoroL3HreIpPacketsFailedToFrag OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IP packets that could not be fragmented
|
|
because IP flag precluded it."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 13}
|
|
|
|
alaCoroL3HreIpxPacketsReceived OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IPX packets received."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 14}
|
|
|
|
alaCoroL3HreIpxBytesReceived OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IPX bytes received."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 15}
|
|
|
|
alaCoroL3HreIpxPacketsForwarded OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IPX packets routed."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 16}
|
|
|
|
alaCoroL3HreIpxBytesForwarded OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IPX bytes routed."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 17}
|
|
|
|
alaCoroL3HreIpxPacketsDiscarded OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IPX packets discarded."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 18}
|
|
|
|
alaCoroL3HreIpxBytesDiscarded OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of IPX bytes discarded."
|
|
::= {alaCoroL3HrePerCoronadoStatsTableEntry 19}
|
|
|
|
alaCoroL3HreUpdateChanges OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
apply (0),
|
|
clear (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Updating this object causes the change list to either be applied
|
|
cleared."
|
|
::= {alcatelIND1PCAMMIBObjects 3}
|
|
|
|
alaCoroL3HreChangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CoroL3HreChangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The statistics and configurable data for a Coronado L3 HRE mode."
|
|
::= {alcatelIND1PCAMMIBObjects 4}
|
|
|
|
alaCoroL3HreChangeTableEntry OBJECT-TYPE
|
|
SYNTAX CoroL3HreChangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry corresponds to a single mode for a single Coronado."
|
|
INDEX { alaCoroL3HreChangeSlotNumber,
|
|
alaCoroL3HreChangeSliceNumber,
|
|
alaCoroL3HreChangeModeNumber }
|
|
::= {alaCoroL3HreChangeTable 1}
|
|
|
|
CoroL3HreChangeEntry ::=
|
|
SEQUENCE {
|
|
alaCoroL3HreChangeSlotNumber Unsigned32,
|
|
alaCoroL3HreChangeSliceNumber Unsigned32,
|
|
alaCoroL3HreChangeModeNumber INTEGER,
|
|
alaCoroL3HreChangeHashTableSize Unsigned32,
|
|
alaCoroL3HreChangeHashFunction CoroL3HashFunction,
|
|
alaCoroL3HreChangeClear INTEGER
|
|
}
|
|
|
|
alaCoroL3HreChangeSlotNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The slot number in which the Coronado resides. Valid range
|
|
will vary depending on hardware configuration."
|
|
::= {alaCoroL3HreChangeTableEntry 1}
|
|
|
|
alaCoroL3HreChangeSliceNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The slice number in which the Coronado resides. Valid range
|
|
will vary depending on hardware configuration."
|
|
::= {alaCoroL3HreChangeTableEntry 2}
|
|
|
|
alaCoroL3HreChangeModeNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Identifier for L3 HRE mode. Note that mode 3 refers to
|
|
data used for modes 3 through 5 since they share hash
|
|
function and memory space."
|
|
::= {alaCoroL3HreChangeTableEntry 3}
|
|
|
|
alaCoroL3HreChangeHashTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of hash buckets to be used for this mode. This must
|
|
be 0 or a power of 2."
|
|
::= {alaCoroL3HreChangeTableEntry 4}
|
|
|
|
alaCoroL3HreChangeHashFunction OBJECT-TYPE
|
|
SYNTAX CoroL3HashFunction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Hash function to be used for this mode."
|
|
::= {alaCoroL3HreChangeTableEntry 5}
|
|
|
|
alaCoroL3HreChangeClear OBJECT-TYPE
|
|
SYNTAX INTEGER { clear(0) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clears changes for the specified mode."
|
|
::= {alaCoroL3HreChangeTableEntry 6}
|
|
|
|
alaCoroL3HrePerModeObjects OBJECT-GROUP
|
|
OBJECTS {
|
|
alaCoroL3HrePerModeSlotNumber,
|
|
alaCoroL3HrePerModeSliceNumber,
|
|
alaCoroL3HrePerModeModeNumber,
|
|
alaCoroL3HreModeHashTableSize,
|
|
alaCoroL3HreModeHashEntriesInUse,
|
|
alaCoroL3HreModeCollEntriesInUse,
|
|
alaCoroL3HreModeCurrentHashFunction,
|
|
alaCoroL3HreMaxCollChainLen,
|
|
alaCoroL3HreAvgCollChainLen
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information for each mode."
|
|
::= { alcatelIND1PCAMMIBGroups 1 }
|
|
|
|
alaCoroL3HrePerCoronadoObjects OBJECT-GROUP
|
|
OBJECTS {
|
|
alaCoroL3HreSlotNumber,
|
|
alaCoroL3HreSliceNumber,
|
|
alaCoroL3HreRouteCacheEntriesTotal,
|
|
alaCoroL3HreRouteCacheEntriesInUse,
|
|
alaCoroL3HreIpPacketsReceived,
|
|
alaCoroL3HreIpBytesReceived,
|
|
alaCoroL3HreIpPacketsForwarded,
|
|
alaCoroL3HreIpBytesForwarded,
|
|
alaCoroL3HreIpPacketsDiscarded,
|
|
alaCoroL3HreIpBytesDiscarded,
|
|
alaCoroL3HreIpPacketsFragmented,
|
|
alaCoroL3HreIpPacketsFragsGenerated,
|
|
alaCoroL3HreIpPacketsFailedToFrag,
|
|
alaCoroL3HreIpxPacketsReceived,
|
|
alaCoroL3HreIpxBytesReceived,
|
|
alaCoroL3HreIpxPacketsForwarded,
|
|
alaCoroL3HreIpxBytesForwarded,
|
|
alaCoroL3HreIpxPacketsDiscarded,
|
|
alaCoroL3HreIpxBytesDiscarded
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects providing information for each Coronado."
|
|
::= { alcatelIND1PCAMMIBGroups 2 }
|
|
|
|
alaCoroL3HreChangeObjects OBJECT-GROUP
|
|
OBJECTS {
|
|
alaCoroL3HreUpdateChanges,
|
|
alaCoroL3HreChangeSlotNumber,
|
|
alaCoroL3HreChangeSliceNumber,
|
|
alaCoroL3HreChangeModeNumber,
|
|
alaCoroL3HreChangeHashTableSize,
|
|
alaCoroL3HreChangeHashFunction,
|
|
alaCoroL3HreChangeClear
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information for changes to be made."
|
|
::= { alcatelIND1PCAMMIBGroups 3 }
|
|
|
|
alcatelInd1PCAMMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for the Coronado Layer 3."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
alaCoroL3HrePerModeObjects,
|
|
alaCoroL3HrePerCoronadoObjects,
|
|
alaCoroL3HreChangeObjects
|
|
}
|
|
|
|
::= { alcatelIND1PCAMMIBCompliances 1 }
|
|
END
|
|
|