Observium_CE/mibs/a3com/C-PRODUCT-ETHER-SPECIFIC-MIB

283 lines
8.3 KiB
Plaintext

C-PRODUCT-ETHER-SPECIFIC-MIB DEFINITIONS ::= BEGIN
IMPORTS
portSlot,
portNumber FROM C-PRODUCT-BASE-MIB
ipOverAtm FROM C-PRODUCT-ETHER-MIB
IpAddress, Counter FROM RFC1155-SMI
PhysAddress FROM RFC1213-MIB
OBJECT-TYPE FROM RFC-1212;
-- The IP over ATM Group
-- IP over ATM Configuration
ipAtmTbl OBJECT-TYPE
SYNTAX SEQUENCE OF IpAtmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The IP over ATM configuration table."
::= { ipOverAtm 1 }
ipAtmEntry OBJECT-TYPE
SYNTAX IpAtmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about one IP over ATM configuration entry."
INDEX { portSlot, portNumber }
::= { ipAtmTbl 1 }
IpAtmEntry ::= SEQUENCE {
ipAtmIpCntl
INTEGER ,
ipAtmBrCntl
INTEGER ,
ipAtmVcSideId
INTEGER ,
ipAtmLanRtrIpAddr
IpAddress ,
ipAtmLanRtrIpMask
IpAddress ,
ipAtmLanRtrMacAddr
PhysAddress ,
ipAtmAtmRtrIpAddr
IpAddress ,
ipAtmAtmRtrIpMask
IpAddress,
portIpAddress
IpAddress,
portIpSubnetMask
IpAddress,
ipAtmVcOtherSideId
INTEGER
}
ipAtmIpCntl OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP control status. When enabled, the virtual circuit
specified here is used to pass IP traffic as routed frames.
The IP control status."
::= { ipAtmEntry 1 }
ipAtmBrCntl OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Bridging control status. When enabled, the virtual circuit
specified here is also used to pass bridging frames."
::= { ipAtmEntry 2 }
ipAtmVcSideId OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the global VC side id
of the LAN side of the IP/ATM VC,
or 0 if no VC is assigned"
::= { ipAtmEntry 3 }
ipAtmLanRtrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the ip address of the router on ethernet port."
::= { ipAtmEntry 4 }
ipAtmLanRtrIpMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the ip subnet mask of the router on ethernet port."
::= { ipAtmEntry 5 }
ipAtmLanRtrMacAddr OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LAN Router's MAC-layer address."
::= { ipAtmEntry 6 }
ipAtmAtmRtrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the ip address of the LIS router on ATM side."
::= { ipAtmEntry 7 }
ipAtmAtmRtrIpMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the ip subnet mask of the LIS router on ATM side."
::= { ipAtmEntry 8 }
portIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the ip address of ethernet port."
::= { ipAtmEntry 9 }
portIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the subnet mask of ethernet port"
::= { ipAtmEntry 10 }
ipAtmVcOtherSideId OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the global VC other side id
of the IP/ATM VC, or 0 if no VC is assigned"
::= { ipAtmEntry 11 }
-- IP over ATM statistics
ipAtmStatTbl OBJECT-TYPE
SYNTAX SEQUENCE OF IpAtmStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The IP over ATM statistics table."
::= { ipOverAtm 2 }
ipAtmStatEntry OBJECT-TYPE
SYNTAX IpAtmStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about one IP over ATM statistics entry."
INDEX { portSlot, portNumber }
::= { ipAtmStatTbl 1 }
IpAtmStatEntry ::= SEQUENCE {
ipAtmStatLanIpRcv
Counter ,
ipAtmStatLanIpFwd
Counter ,
ipAtmStatLanIpDrop
Counter ,
ipAtmStatLanArpReq
Counter ,
ipAtmStatLanArpRes
Counter ,
ipAtmStatAtmIpRcv
Counter ,
ipAtmStatAtmIpFwd
Counter ,
ipAtmStatAtmIpDrop
Counter ,
ipAtmStatAtmArpReq
Counter ,
ipAtmStatAtmArpRes
Counter
}
ipAtmStatLanIpRcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of IP packets received on the Port"
::= { ipAtmStatEntry 1 }
ipAtmStatLanIpFwd OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of IP packets received from the Port and forwarded"
::= { ipAtmStatEntry 2 }
ipAtmStatLanIpDrop OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of IP packets received from the Port and dropped"
::= { ipAtmStatEntry 3 }
ipAtmStatLanArpReq OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ARP request packets received on the Port"
::= { ipAtmStatEntry 4 }
ipAtmStatLanArpRes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ARP response packets received on the Port"
::= { ipAtmStatEntry 5 }
ipAtmStatAtmIpRcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of IP packets received on the VC assigned at this
port"
::= { ipAtmStatEntry 6 }
ipAtmStatAtmIpFwd OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of IP packets received from the VC and forwarded"
::= { ipAtmStatEntry 7 }
ipAtmStatAtmIpDrop OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of IP packets received from the VC and dropped"
::= { ipAtmStatEntry 8 }
ipAtmStatAtmArpReq OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ARP request packets received on the VC"
::= { ipAtmStatEntry 9 }
ipAtmStatAtmArpRes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ARP response packets received on the VC"
::= { ipAtmStatEntry 10 }
END