2018 lines
64 KiB
Plaintext
2018 lines
64 KiB
Plaintext
|
|
--
|
|
-- This MIB is for 3Com intermediate systems to provide information
|
|
-- about their Ports and Paths.
|
|
--
|
|
-- The 3Com Enterprise Products Proprietary MIB Extensions
|
|
--
|
|
-- Copyright 3Com Corporation, 1991. All rights reserved.
|
|
--
|
|
-- 28-may-91: dtp
|
|
-- 17-aug-92: kxy
|
|
-- 01-sep-92: kxy
|
|
-- 08-dec-92: kxy
|
|
-- 12-dec-92: kxy
|
|
-- 16-dec-92: kxy added dial backup objects
|
|
-- 27-jan-93: kxy added path stats objects
|
|
-- 07-apr-93: hxl seperate dial from port and path
|
|
-- 27-may-93: hxl minor consistency changes.
|
|
-- 29-jun-93: hxl added port owner object.
|
|
-- 07-aug-93: hxl added more baud rates.
|
|
--
|
|
-- changes FOR 7.0 (r2 of MIB) *************************
|
|
-- 20-sep-93: kxy added multiple priority queue objects
|
|
-- 16-oct-93: kxy added support for DataLinkMacAddr
|
|
-- 18-oct-93: kxy added support for auto startup
|
|
-- 20-oct-93: kxy added support for SmartFiltering control
|
|
-- 20-oct-93: kxy added support for Central Mac control
|
|
-- 21-oct-93: kgo added support for Dial on Demand
|
|
-- 02-nov-93: kxy added support for new Path Baud parameter
|
|
-- 15-nov-93: kxy deprecated a3ComDlMacAddr
|
|
-- 09-dec-93: kxy added enums to a3ComPortOwner and a3ComPathDialType
|
|
-- these indicate that current values were determined by autostartup
|
|
-- 13-dec-93: kgo added support for DialMode including modes determined by autostartup
|
|
-- 20-dec-93: added support for a3ComPortName
|
|
-- 21-dec-93: kxy moved a3ComDefaultPriority from the Port Table to
|
|
-- { a3ComPort 3 }
|
|
-- 06-jan-94: kxy added a3ComPortVirtual to indicate virtual ports from normal ports
|
|
--
|
|
-- changes for 7.1 (r3 of MIB) ****************
|
|
-- 01-jun-94: kxy added Queue Throttle.
|
|
--
|
|
--
|
|
-- changes for 8.0 (r4 of MIB)
|
|
-- 26-jul-94: kxy added new connector types to a3ComPathConn
|
|
-- 28-jul-94: kgo created new tables, a3ComPortDialPhoneListTable and
|
|
-- a3ComPortDialPoolPrefTable, to support Dial Pooling
|
|
-- and also added new objects to PortEntry, PathDialEntry
|
|
-- and PortDialEntry.
|
|
-- 28-jul-94: syc added objects to support ISDN UI.
|
|
--
|
|
-- 03-Aug-94: rrr Reserved. Not Xmitted Yet.
|
|
-- 29-Aug-94: kxy fixed MIB syntax errors
|
|
-- 12-Sep-94: kgo updated the description of a3ComPathPort, a3ComPortPath
|
|
-- and a3ComPortStatus, to include additional information
|
|
-- on the use of the dynamic dialpool.
|
|
-- 15-Sep-94: kgo added new object a3ComPathDialExDevType to support Dial
|
|
-- Pooling.
|
|
--
|
|
-- changes for 8.2 (r5 of MIB)
|
|
-- 19-Apr-95 ppl added a3ComPortDialBODTHreshold to PortDialTable
|
|
-- 18-May-95 frp added a3ComPortIbmTraffic to Port table
|
|
--
|
|
-- changes for 8.3 (r6 of MIB)
|
|
-- 25-Jul-95 yeeping added a3ComPortDuplex to Path table.
|
|
-- 26-Aug-05 kxy added enum x21(11) to a3ComPathConn.
|
|
|
|
A3Com-PortPath-r6-MIB DEFINITIONS ::= BEGIN
|
|
|
|
|
|
IMPORTS
|
|
enterprises, TimeTicks, Counter
|
|
FROM RFC1155-SMI
|
|
DisplayString
|
|
FROM RFC1213-MIB
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
|
|
a3Com OBJECT IDENTIFIER ::= { enterprises 43 }
|
|
brouterMIB OBJECT IDENTIFIER ::= { a3Com 2 }
|
|
a3ComPath OBJECT IDENTIFIER ::= { brouterMIB 16 }
|
|
a3ComPort OBJECT IDENTIFIER ::= { brouterMIB 17 }
|
|
a3ComPathDial OBJECT IDENTIFIER ::= { brouterMIB 18 }
|
|
a3ComPortDial OBJECT IDENTIFIER ::= { brouterMIB 19 }
|
|
|
|
|
|
|
|
RowStatus ::= INTEGER {
|
|
active(1),
|
|
notInService(2),
|
|
notReady(3),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
|
|
--This data type, which has the same semantics as the rowStatus
|
|
--textual convention used in SNMPv2, is used to add and
|
|
--delete entries from a table.
|
|
|
|
--The Port table in this MIB allow a subset of the functionality
|
|
--provided by the rowStatus textual convention. In particular
|
|
--row creation is allowed using only the createAndGo method.
|
|
|
|
--That is, when adding entries to this table, this object
|
|
--must be set to createAndGo(4). The instance identifier
|
|
--for this object will define the values of the columns
|
|
--that make up the index.
|
|
|
|
--In the same PDU, the appropriate remaining columns
|
|
--of that row must be set as well. The agent
|
|
--will immediately set the value of this object to
|
|
--active(1) if the row is correct. If not, the agent
|
|
--will refuse the SET request and return an
|
|
--error code.
|
|
|
|
--To modify an existing entry, it must be removed
|
|
--and another entry with the desired changes added.
|
|
|
|
--To remove an entry, set the value of this object
|
|
--to destroy(6).
|
|
|
|
-- A group to contain all the PATH information
|
|
|
|
a3ComPathNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of entries in the Path Table. These
|
|
correspond to physical interfaces in a 3Com product.
|
|
|
|
Note, any changes made to any entry in this table
|
|
will affect only the value stored in the configuration
|
|
files. To cause the new values to take effect, the
|
|
Path status must be toggled. To accomplish this, set
|
|
the value of a3ComPathAdminStatus.x to active(1). (x
|
|
indicates the Path number in question)"
|
|
::= { a3ComPath 1 }
|
|
|
|
a3ComPathTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComPathEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of physical interfaces."
|
|
::= { a3ComPath 2 }
|
|
|
|
a3ComPathEntry OBJECT-TYPE
|
|
SYNTAX A3ComPathEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
INDEX { a3ComPathIndex }
|
|
::= { a3ComPathTable 1 }
|
|
|
|
A3ComPathEntry ::= SEQUENCE {
|
|
a3ComPathIndex
|
|
INTEGER,
|
|
a3ComPathName
|
|
DisplayString,
|
|
a3ComPathPort
|
|
INTEGER,
|
|
a3ComPathItcmOption
|
|
INTEGER,
|
|
a3ComPathT1Mode
|
|
INTEGER,
|
|
a3ComPathCryptoResync
|
|
INTEGER,
|
|
a3ComPathCRC
|
|
INTEGER,
|
|
a3ComPathAdminStatus
|
|
INTEGER,
|
|
a3ComPathOperStatus
|
|
INTEGER,
|
|
a3ComPathBaud
|
|
INTEGER,
|
|
a3ComPathConn
|
|
INTEGER,
|
|
a3ComPathClock
|
|
INTEGER,
|
|
a3ComPathLastChange
|
|
TimeTicks,
|
|
a3ComPathSlotIndex
|
|
INTEGER,
|
|
a3ComPathConnPos
|
|
INTEGER,
|
|
a3ComPathInOctets
|
|
Counter,
|
|
a3ComPathInUcastPkts
|
|
Counter,
|
|
a3ComPathInNUcastPkts
|
|
Counter,
|
|
a3ComPathInDiscards
|
|
Counter,
|
|
a3ComPathInErrors
|
|
Counter,
|
|
a3ComPathInUnknownProtos
|
|
Counter,
|
|
a3ComPathOutOctets
|
|
Counter,
|
|
a3ComPathOutUcastPkts
|
|
Counter,
|
|
a3ComPathOutNUcastPkts
|
|
Counter,
|
|
a3ComPathOutDiscards
|
|
Counter,
|
|
a3ComPathOutErrors
|
|
Counter,
|
|
a3ComPathBaudRate
|
|
INTEGER,
|
|
a3ComPathDuplex
|
|
INTEGER
|
|
}
|
|
|
|
a3ComPathIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique identifier for each path. The
|
|
value for each path must remain constant at
|
|
least from one re-initialization of the entity's
|
|
network management system to the next re-initialization."
|
|
::= { a3ComPathEntry 1 }
|
|
|
|
a3ComPathName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A descriptive name for the path"
|
|
::= { a3ComPathEntry 2 }
|
|
|
|
a3ComPathPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index of the entry in the Port table to which
|
|
this path entry has been assigned. Unassigned entries
|
|
have a value of zero. This object allows adding and deleting
|
|
paths from ports.In order for any modifications to take
|
|
effect, the path(s) associated with this command must be
|
|
enabled(re-enabled if it is already enable).
|
|
|
|
Paths that have been assigned to the dialpool (pool of dynamic
|
|
dial paths) have port values of -1. For a read(get) operation,
|
|
a value of -1 will be returned if the path is not assigned to
|
|
any port but belongs to the dialpool. A write operation with
|
|
a value of -1 is not legal and will generate an error return."
|
|
::= { a3ComPathEntry 3 }
|
|
|
|
a3ComPathItcmOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
compatible(1),
|
|
incompatible(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object should be set to compatible if the
|
|
bridge/router is attached via a serial link to a
|
|
3Com Series/1 based bridge or bridge/router (IB/3, BR/3)
|
|
that contains an ITCM board."
|
|
::= { a3ComPathEntry 4 }
|
|
|
|
a3ComPathT1Mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling this object allows for better line speed than
|
|
if this were disabled. However, do not enable this object
|
|
when a3ComPathItcmOpt is set to compatible."
|
|
::= { a3ComPathEntry 5 }
|
|
|
|
a3ComPathCryptoResync OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling this parameter causes the router to resynch with
|
|
any attached KG84/91 devices. This only applies to the 449
|
|
interface of a wide area bridge/router."
|
|
::= { a3ComPathEntry 6 }
|
|
|
|
a3ComPathCRC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
crc16 (16),
|
|
crc32 (32)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This controls the type of Cyclic Redundancy Check that
|
|
is performed on a serial line. In order for any modifications
|
|
to take effect, the path must be enabled(re-enabled if it is
|
|
already enable)."
|
|
::= { a3ComPathEntry 7 }
|
|
|
|
a3ComPathAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object enables or disables a path."
|
|
::= { a3ComPathEntry 8 }
|
|
|
|
a3ComPathOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
disabled(3),
|
|
notAvailable(4),
|
|
other(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The actual state of the path."
|
|
::= { a3ComPathEntry 9 }
|
|
|
|
a3ComPathBaud OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
baud1200(2),
|
|
baud2400(3),
|
|
baud4800(4),
|
|
baud9600(5),
|
|
baud19200(6),
|
|
baud38400(7),
|
|
baud56k(8),
|
|
baud64k(9),
|
|
baud128k(10),
|
|
baud256k(11),
|
|
baud448k(12),
|
|
baud1536k(13),
|
|
baud2048k(14),
|
|
baud3072k(15),
|
|
baud4000k(16),
|
|
baud4608k(17),
|
|
baud6144k(18),
|
|
baud7680k(19),
|
|
baud9216k(20),
|
|
baud16000k(21),
|
|
other(22)
|
|
}
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The baud rate for serial paths. For ethernet,
|
|
token ring, or FDDI connections this has a value
|
|
notApplicable(1). In order for any modifications
|
|
to take effect, the path must be enabled(re-enabled
|
|
if it is already enable).
|
|
|
|
Note, this object is being replaced by a3ComPathBaudRate."
|
|
DEFVAL { baud64k }
|
|
::= { a3ComPathEntry 10 }
|
|
|
|
a3ComPathConn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
v35(2),
|
|
rs232(3),
|
|
rs449(4),
|
|
g703(5),
|
|
t3(6),
|
|
isdnBri(7),
|
|
isdnPri(8),
|
|
auto(9),
|
|
other(10),
|
|
x21(11)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The connector for the path. For ethernet,
|
|
token ring, or FDDI connections this has a value
|
|
notApplicable(1). In order for any modifications
|
|
to take effect, the path must be enabled(re-enabled
|
|
if it is already enable). Do Not change the order of
|
|
any of these enumerations."
|
|
::= { a3ComPathEntry 11 }
|
|
|
|
a3ComPathClock OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
internal(2),
|
|
external(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"How the transmit clock is derived. For ethernet,
|
|
token ring, or FDDI connections this has a value
|
|
notApplicable(1). In order for any modifications
|
|
to take effect, the path must be enabled(re-enabled
|
|
if it is already enable)."
|
|
::= { a3ComPathEntry 12 }
|
|
|
|
a3ComPathLastChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time the path
|
|
entered its current operational state."
|
|
::= { a3ComPathEntry 13 }
|
|
|
|
a3ComPathSlotIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index number of the chassis slot into which the module
|
|
(or board) that supports this Path is inserted."
|
|
::= { a3ComPathEntry 14 }
|
|
|
|
a3ComPathConnPos OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The relative position on the module (or board) of the
|
|
physical connector that supports this path. The position
|
|
is identified by an index, which starts at one with the upper
|
|
left connector and continues left to right and top to bottom
|
|
ending at the lower right connector."
|
|
::= { a3ComPathEntry 15 }
|
|
|
|
a3ComPathInOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of octets received on the
|
|
path, including framing characters."
|
|
::= { a3ComPathEntry 16 }
|
|
|
|
a3ComPathInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of subnetwork-unicast packets
|
|
delivered to a higher-layer protocol."
|
|
::= { a3ComPathEntry 17 }
|
|
|
|
a3ComPathInNUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of non-unicast (i.e., subnetwork-
|
|
broadcast or subnetwork-multicast) packets
|
|
delivered to a higher-layer protocol."
|
|
::= { a3ComPathEntry 18 }
|
|
|
|
a3ComPathInDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of inbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being deliverable to a
|
|
higher-layer protocol. One possible reason for
|
|
discarding such a packet could be to free up
|
|
buffer space."
|
|
::= { a3ComPathEntry 19 }
|
|
|
|
a3ComPathInErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of inbound packets that contained
|
|
errors preventing them from being deliverable to a
|
|
higher-layer protocol."
|
|
::= { a3ComPathEntry 20 }
|
|
|
|
a3ComPathInUnknownProtos OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets received via the path
|
|
which were discarded because of an unknown or
|
|
unsupported protocol."
|
|
::= { a3ComPathEntry 21 }
|
|
|
|
a3ComPathOutOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the
|
|
path, including framing characters."
|
|
::= { a3ComPathEntry 22 }
|
|
|
|
a3ComPathOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level
|
|
protocols requested be transmitted to a
|
|
subnetwork-unicast address, including those that
|
|
were discarded or not sent."
|
|
::= { a3ComPathEntry 23 }
|
|
|
|
a3ComPathOutNUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level
|
|
protocols requested be transmitted to a non-
|
|
unicast (i.e., a subnetwork-broadcast or
|
|
subnetwork-multicast) address, including those
|
|
that were discarded or not sent."
|
|
::= { a3ComPathEntry 24 }
|
|
|
|
a3ComPathOutDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of outbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being transmitted. One
|
|
possible reason for discarding such a packet could
|
|
be to free up buffer space."
|
|
::= { a3ComPathEntry 25 }
|
|
|
|
a3ComPathOutErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of outbound packets that could not be
|
|
transmitted because of errors."
|
|
::= { a3ComPathEntry 26 }
|
|
|
|
a3ComPathBaudRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100000000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The baud rate for serial paths. For ethernet,
|
|
token ring, or FDDI connections this reports the
|
|
actual value, but SETs are not allowed for those
|
|
Paths.
|
|
|
|
In order for any modifications to take effect, the
|
|
path must be enabled(re-enabled if it is already enable).
|
|
|
|
Note, this object is replacing a3ComPathBaud, which is
|
|
being deprecated. For SW release 7.0, both objects
|
|
will be supported."
|
|
::= { a3ComPathEntry 27 }
|
|
|
|
a3ComPathDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full (1),
|
|
half (2),
|
|
auto (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The duplex mode is for SDLC and V3. It describes the physical
|
|
characteristics of the communication method used to control the
|
|
request-to-send signal. It has three values which are full, half
|
|
and auto.
|
|
|
|
The path has to be (re)enabled for any new setting to take effect."
|
|
DEFVAL { auto }
|
|
::= { a3ComPathEntry 28 }
|
|
|
|
--
|
|
-- This group contains all the PORT information
|
|
--
|
|
-- A port is assumed to be equivalent to an "interface" as
|
|
-- defined by MIB2. As such, additional information about
|
|
-- each port can be obtained from the interface group in
|
|
-- MIB2.
|
|
--
|
|
|
|
a3ComPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of entries in the Port Table. These
|
|
correspond to attached or remotely connected
|
|
network segments."
|
|
::= { a3ComPort 1 }
|
|
|
|
a3ComPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of attached or remotely connect
|
|
network segments."
|
|
::= { a3ComPort 2 }
|
|
|
|
a3ComPortEntry OBJECT-TYPE
|
|
SYNTAX A3ComPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
INDEX { a3ComPortIndex }
|
|
::= { a3ComPortTable 1 }
|
|
|
|
A3ComPortEntry ::= SEQUENCE {
|
|
a3ComPortIndex
|
|
INTEGER,
|
|
a3ComPortOwner
|
|
INTEGER,
|
|
a3ComPortBoundaryRoute
|
|
INTEGER,
|
|
a3ComPortBoundaryEncap
|
|
INTEGER,
|
|
a3ComPortCosInterleave
|
|
INTEGER,
|
|
a3ComPortMacAddrFmtARP
|
|
INTEGER,
|
|
a3ComPortMacAddrFmtIPX
|
|
INTEGER,
|
|
a3ComPortMacAddrFmtXNS
|
|
INTEGER,
|
|
a3ComPortPath
|
|
INTEGER,
|
|
a3ComQueueInterleave1
|
|
INTEGER,
|
|
a3ComQueueInterleave2
|
|
INTEGER,
|
|
a3ComQueuePattern
|
|
INTEGER,
|
|
a3ComPortAsOwnerTimer
|
|
INTEGER,
|
|
a3ComSmartFilteringCtl
|
|
INTEGER,
|
|
a3ComBrCentralMacCtl
|
|
INTEGER,
|
|
a3ComPortLabel
|
|
DisplayString,
|
|
a3ComPortCircuitID
|
|
OCTET STRING,
|
|
a3ComPortStatus
|
|
RowStatus,
|
|
a3ComPortName
|
|
DisplayString,
|
|
a3ComPortVirtual
|
|
INTEGER,
|
|
a3ComQueueThrottle
|
|
INTEGER,
|
|
a3ComPortInCallerId
|
|
DisplayString,
|
|
a3ComPortCompType
|
|
INTEGER,
|
|
a3ComPortX25ProtID
|
|
INTEGER (0..255),
|
|
a3ComPortIbmTraffic
|
|
INTEGER
|
|
}
|
|
|
|
a3ComPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each port. This corresponds to ifIndex
|
|
for MIB II. The interface table from MIB II will contain
|
|
additional information for this port, including its type,
|
|
its name and its description."
|
|
::= { a3ComPortEntry 1 }
|
|
|
|
a3ComPortOwner OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ethernet (1),
|
|
tokenRing (2),
|
|
fddi (3),
|
|
ppp (4),
|
|
plg (5),
|
|
x25 (6),
|
|
frameRelay (7),
|
|
smds (8),
|
|
auto (9),
|
|
autoPpp (10),
|
|
autoFr (11)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the owner for this port.
|
|
User can set the owner using this object, however, if
|
|
the owner does not match the actual physical interface card
|
|
associated with this port, it is ignored.
|
|
|
|
If this object has been set to auto(9), the system will automatically
|
|
determine the proper port owner. In this case, the value of this
|
|
object when examined via a GET or GETNEXT request will reflect the
|
|
system determined value, ie. autoPpp(10) or autoFr(11). It will NOT
|
|
return auto(9). Note, this only applies to High Speed Serial ports."
|
|
::= { a3ComPortEntry 2 }
|
|
|
|
a3ComPortBoundaryRoute OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
enabled (2),
|
|
disabled (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object controls whether the Boundary Routing feature is
|
|
enabled for this port. Note: this feature only applies to
|
|
serial ports on a NB2 and will be disabled for non-serial ports.
|
|
|
|
Note, when this parameter is enabled/disabled, the port itself
|
|
must be disabled and then re-enabled for the new value to take
|
|
effect. This is done by setting the corresponding instance of
|
|
ifAdminStatus to up(1)."
|
|
::= { a3ComPortEntry 3 }
|
|
|
|
a3ComPortBoundaryEncap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
ethernet (2),
|
|
tokenring (3),
|
|
fddi (4),
|
|
none (5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object decides the packet encapsulation rules
|
|
to be applied to outgoing packets. If this is set
|
|
to none (5), the boundary router on the other end of
|
|
the serial link is capable of supporting translation.
|
|
In this case, all bridged packets will be sent unchanged.
|
|
Boundary routed packets will be sent with the default
|
|
mode: Ethernet. All other settings of this object
|
|
implies that the remote device does not support translation.
|
|
Therefore, all packets must be encapsulated according to
|
|
this object. In order for any modifications to take
|
|
effect, the port associated with this command must be
|
|
disabled and then enabled.
|
|
|
|
Note, this only applies to serial ports on a NB2. For
|
|
all non-serial ports, this object will have the value
|
|
notApplicable(1)."
|
|
::= { a3ComPortEntry 4 }
|
|
|
|
a3ComPortCosInterleave OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"(For bridging.) The number of high-priority packets
|
|
that will be transmitted for each low-priority
|
|
packet. If the value is 0, then low-priority packets
|
|
will only be transmitted when there are no packets
|
|
in the high-priority queue.
|
|
|
|
This object only applies to serial ports. Interleaving
|
|
will not take affect on non-serial ports and this object
|
|
will have the value 0 for those ports.
|
|
|
|
Note, this object has been deprecated from software versions
|
|
7.0 and later."
|
|
::= { a3ComPortEntry 5 }
|
|
|
|
a3ComPortMacAddrFmtARP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
canonical (1),
|
|
nonCanonical (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the MAC address format used
|
|
in ARP packets sent by this port. Note, nonCanonical(2)
|
|
is allowed only on Token Ring ports."
|
|
::= { a3ComPortEntry 6 }
|
|
|
|
a3ComPortMacAddrFmtIPX OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
canonical (1),
|
|
nonCanonical (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This determine the MAC address format used in
|
|
IPX packets sent by this port. Note, nonCanonical(2)
|
|
is allowed only on Token Ring ports."
|
|
::= { a3ComPortEntry 7 }
|
|
|
|
a3ComPortMacAddrFmtXNS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
canonical(1),
|
|
nonCanonical(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This determines the MAC address format used in
|
|
XNS packets sent by this port. Note, nonCanonical(2)
|
|
is allowed only on Token Ring ports."
|
|
::= { a3ComPortEntry 8 }
|
|
|
|
a3ComPortPath OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Path which is assigned to this port. In some cases,
|
|
one or more Paths will be assigned to a single Port. This
|
|
object will return the lowest number Path in that case.
|
|
For those situations where more than one Port is assigned
|
|
to a single Path (e.g., nport), this object will return the
|
|
Path Index (or Parent Port).
|
|
|
|
This object must be specified when adding a new virtual port.
|
|
|
|
In the case where the dialpool (pool of dynamic dial paths)
|
|
is assigned to a port, a value of -1 will be used to indicate
|
|
that. When doing a get(read) of either a virtual or non-virtual
|
|
dial port, a return value of -1 indicates that the dialpool is
|
|
assigned to that port. A write(set) operation using a path number
|
|
value of -1 is required only in the case of creating a virtual
|
|
dynamic dial port; to create a non-virtual dynamic dial port,
|
|
setting this object is not required."
|
|
::= { a3ComPortEntry 9 }
|
|
|
|
a3ComQueueInterleave1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the interleave factor between
|
|
the high and medium priority port queues.
|
|
|
|
Note, this applies only to HSS ports. For non-HSS ports,
|
|
this object will have the value 0."
|
|
::= { a3ComPortEntry 10 }
|
|
|
|
a3ComQueueInterleave2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the interleave factor between
|
|
the medium and low priority port queues.
|
|
|
|
Note, this applies only to HSS ports. For non-HSS ports,
|
|
this object will have the value 0."
|
|
::= { a3ComPortEntry 11 }
|
|
|
|
|
|
-- the following object has been removed from this table and
|
|
-- moved to { a3ComPort 3 }
|
|
--
|
|
--a3ComDefaultPriority OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- high (1),
|
|
-- med (2),
|
|
-- low (3)
|
|
-- }
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "This object specifies the default priority queue into
|
|
-- which a packet with no preassigned priority is placed.
|
|
--
|
|
-- Note, this applies only to HSS ports. For non-HSS ports,
|
|
-- this object will return the value med(2)."
|
|
-- ::= { a3ComPortEntry 12 }
|
|
--
|
|
|
|
a3ComQueuePattern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ratio3to3to2 (1),
|
|
ratio4to2to2 (2),
|
|
ratio4to3to1 (3),
|
|
ratio5to2to1 (4),
|
|
ratio6to1to1 (5),
|
|
other (6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This identifies the relative ratios of high priority packets
|
|
versus medium priority packets versus low priority packets
|
|
(in that order) that will be transmitted by this port. These
|
|
ratios are based on the current values of a3ComQueueInterleave1
|
|
and a3ComQueueInterleave2.
|
|
|
|
Note, this applies only to HSS ports."
|
|
::= { a3ComPortEntry 13 }
|
|
|
|
|
|
a3ComPortAsOwnerTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object only applies to High Speed Serial ports. When
|
|
the Owner of this port has been set to Auto, the system will
|
|
also automatically determine the proper Owner to assign to
|
|
the port. This object is used to indicate the current status
|
|
of the system when it is making these determinations.
|
|
|
|
A returned value of -1 indicates auto start-up has failed in
|
|
determining an owner (path didn't come up). A value of 0 means
|
|
either auto start-up has succeded in determining the owner
|
|
or the owner was set manually. A value greater than 0 means
|
|
the auto start-up is in process and trying to determine the
|
|
proper port owner."
|
|
::= { a3ComPortEntry 15 }
|
|
|
|
a3ComSmartFilteringCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
smartFilter (1),
|
|
noSmartFilter (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable or disable the Smart Filtering
|
|
mechanism on a port. Note, this only applies to the Central
|
|
Node in a boundary routing environment.
|
|
|
|
Note, when this parameter is enabled/disabled, the Boundary Routing
|
|
service itself must be disabled and then re-enabled for the new
|
|
value to take effect. This is done by setting the corresponding instance
|
|
of a3ComPortBoundaryRoute to disabled(3) and then enabled(2)."
|
|
DEFVAL { smartFilter }
|
|
::= { a3ComPortEntry 16 }
|
|
|
|
a3ComBrCentralMacCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
centralMac (1),
|
|
noCentralMac (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable or disable the Boundary
|
|
Routing Central MAC feature. If this feature is enabled,
|
|
(ie, if this object has the value centralMac(1)), the
|
|
Central Node (in a Boundary Routing environment) will use
|
|
a special internally saved MAC address as its source
|
|
MAC address on this port. This will allow certain protocols
|
|
(such as TCP/IP and IPX) running on the Leaf Nodes to switch
|
|
to another Central Node without losing sessions.
|
|
|
|
Note, in order for this feature to operate properly, it must
|
|
be enabled on all the Central Nodes attached to the same Leaf
|
|
Node. Also note, this feature only applies to Central Nodes
|
|
(in a Boundary Routing environment) and doesn't apply to
|
|
the Leaf Nodes.
|
|
|
|
Note, when this parameter is enabled/disabled, the port itself
|
|
must be disabled and then re-enabled for the new value to take
|
|
effect. This is done by setting the corresponding instance of
|
|
ifAdminStatus to up(1)."
|
|
DEFVAL { noCentralMac }
|
|
::= { a3ComPortEntry 17 }
|
|
|
|
a3ComPortLabel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the descriptive label assigned to this
|
|
port by the router. These labels are used by the User Interface
|
|
and are useful when comparing information retrieved via SNMP with
|
|
information retrieved via the User Interface."
|
|
::= { a3ComPortEntry 18 }
|
|
|
|
a3ComPortCircuitID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object applies only to virtual ports and specifies the unique
|
|
data link circuit or channel identifier assigned to this virtual port.
|
|
For example, if this virtual port is attached to a Frame Relay network,
|
|
this object would specify the DLCI associated with this virtual port.
|
|
The Parent of this virtual port is identified by a3ComPortPath (which
|
|
also identifies the physical path that this virtual port is associated
|
|
with).
|
|
|
|
This object must be specified when adding a new virtual port."
|
|
::= { a3ComPortEntry 19 }
|
|
|
|
a3ComPortStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to add or delete virtual ports. When adding a new
|
|
virtual port, only the createAndGo method of adding rows is supported.
|
|
Specifically, all essential elements of the row must be specified in the
|
|
same SET request PDU.
|
|
|
|
For a non-dialup (PPP) port, these elements are the circuit identifier
|
|
(a3ComPortCircuitID), the Parent Port (a3ComPortPath), and the virtual
|
|
port number (which is specified by the instance identifiers associated with
|
|
each of these objects). Note, this virtual port number gets mapped uniquely to
|
|
a port label. It is these port labels that are used to identify ports via the
|
|
User Interface.
|
|
For a diaup (PPP) port, these elements are the IncomingCallerID(a3ComPortInCallerId),
|
|
the dynamic dialpool (a3ComPortPath with value of -1), and the virtual port number."
|
|
::= { a3ComPortEntry 20 }
|
|
|
|
a3ComPortName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The user-assigned name given to this port. Note, this name
|
|
may not have any blanks."
|
|
::= { a3ComPortEntry 21 }
|
|
|
|
a3ComPortVirtual OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal (1),
|
|
virtual (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates whether this port is a virtual port or
|
|
a normal port."
|
|
::= { a3ComPortEntry 22 }
|
|
|
|
a3ComQueueThrottle OBJECT-TYPE
|
|
SYNTAX INTEGER (0..40)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the maximum number of medium and low priority
|
|
packets that can be sent to the line driver each time some packets
|
|
are sent to the driver. A value of 0 means that there is no limit."
|
|
DEFVAL { 0 }
|
|
::= { a3ComPortEntry 23 }
|
|
|
|
a3ComPortInCallerId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A text string to specify the effective Incoming CallerID for the port.
|
|
This object must be successfully set for a port to use the dynamic dial
|
|
pool. It is used by the port to decide if an incoming call should be
|
|
accepted. An incoming call on a dynamic dial path must provide a CallerID
|
|
matching this object's value in order for the call to be accepted.
|
|
For a non-virtual port, setting this object alone is sufficient to
|
|
configure the port to use the dynamic dial pool. Note however, that the
|
|
dynamic pool can only be used as a Secondary dial path, and not as a
|
|
Primary path, for a non-virtual port.
|
|
In the case of a virtual dynamic dial port, this object is used in
|
|
conjunction with objects a3ComPortPath and a3ComPortStatus to create
|
|
a virtual dynamic dial port."
|
|
::= { a3ComPortEntry 24 }
|
|
|
|
a3ComPortCompType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
none (1),
|
|
history (2),
|
|
perPacket (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the type of compression performed on this Port.
|
|
NONE indicates that the compression is disabled. HIStory indicates
|
|
that the compression is enabled and preserves the History across the
|
|
frames and PerPacket indicates the compression is enabled but history
|
|
is not preserved across the frames."
|
|
DEFVAL { none }
|
|
::= { a3ComPortEntry 25 }
|
|
|
|
a3ComPortX25ProtID OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the X25 ProtolID used when running in
|
|
Boundary Routed Mode for establishing the Virtual Circuits
|
|
over X25 Link."
|
|
DEFVAL { 221 }
|
|
::= { a3ComPortEntry 26 }
|
|
|
|
a3ComPortIbmTraffic OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ibmTraffic (1),
|
|
noibmTraffic (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable or disable the SmartFiltering
|
|
of IBM Traffic mechanism on a port. Note, this only applies to
|
|
the Central Node in a boundary routing environment.
|
|
|
|
Note, when this parameter is enabled/disabled, the port itself
|
|
must be disabled and then re-enabled for the new value to take
|
|
effect. This is done by setting the corresponding instance of
|
|
ifAdminStatus to up(1)."
|
|
DEFVAL { noibmTraffic }
|
|
::= { a3ComPortEntry 27 }
|
|
|
|
--
|
|
-- This next object reflects the default priority for the
|
|
-- system as a whole.
|
|
--
|
|
|
|
a3ComDefaultPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
high (1),
|
|
med (2),
|
|
low (3),
|
|
unknown (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the default priority queue into
|
|
which a packet with no preassigned priority is placed.
|
|
|
|
Note, the system retains only a single instance of
|
|
this parameter and it is relevant only to HSS ports."
|
|
::= { a3ComPort 3 }
|
|
|
|
--
|
|
-- This group contains all the PATH DIAL information
|
|
--
|
|
|
|
a3ComPathDialNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of entries in the Path Dial Table. These
|
|
correspond to physical interfaces in a 3Com product."
|
|
::= { a3ComPathDial 1 }
|
|
|
|
a3ComPathDialTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComPathDialEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of physical interfaces."
|
|
::= { a3ComPathDial 2 }
|
|
|
|
a3ComPathDialEntry OBJECT-TYPE
|
|
SYNTAX A3ComPathDialEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
INDEX { a3ComPathDialIndex }
|
|
::= { a3ComPathDialTable 1 }
|
|
|
|
A3ComPathDialEntry ::= SEQUENCE {
|
|
a3ComPathDialIndex
|
|
INTEGER,
|
|
a3ComPathDialType
|
|
INTEGER,
|
|
a3ComPathDialCtl
|
|
INTEGER,
|
|
a3ComPathDialAction
|
|
INTEGER,
|
|
a3ComPathDialNum
|
|
DisplayString (SIZE(0..30)),
|
|
a3ComPathDialDodIdleTime
|
|
INTEGER (1..3600),
|
|
a3ComPathDialMode
|
|
INTEGER,
|
|
a3ComPathDialDynCont
|
|
INTEGER,
|
|
a3ComPathDialLocalDialNumber
|
|
DisplayString (SIZE(0..30)),
|
|
a3ComPathDialLocalSubAddress
|
|
DisplayString (SIZE(0..20)),
|
|
a3ComPathDialSPIDDN1
|
|
DisplayString (SIZE(0..37)),
|
|
a3ComPathDialSPIDDN2
|
|
DisplayString (SIZE(0..37)),
|
|
a3ComPathDialRateAdaption
|
|
INTEGER,
|
|
a3ComPathDialSwitchType
|
|
INTEGER,
|
|
a3ComPathDialExDevType
|
|
INTEGER
|
|
}
|
|
|
|
a3ComPathDialIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique identifier for each path. The
|
|
value for each path must remain constant at
|
|
least from one re-initialization of the entity's
|
|
network management system to the next re-initialization."
|
|
::= { a3ComPathDialEntry 1 }
|
|
|
|
a3ComPathDialType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primaryLeased (1),
|
|
primaryDial (2),
|
|
secondaryDial (3),
|
|
other (4),
|
|
primaryAuto (5),
|
|
secondaryAuto (6),
|
|
secondaryLeased (7),
|
|
primaryAutoLeased (8),
|
|
primaryAutoDial (9),
|
|
secondaryAutoLeased (10),
|
|
secondaryAutoDial (11)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When assigning multiple paths for a single port,
|
|
and one or more of those paths is a dial-up Path,
|
|
this object must identify which Path is the primary
|
|
Path and whether it is a leased or dial-up Path.
|
|
Similarly, the other Paths must be identified as
|
|
secondaryDial. (The secondary Path must be a dial-up
|
|
Path.)
|
|
|
|
Note, if this object has been set to either primaryAuto(5)
|
|
or secondaryAuto(6), the system will automatically determine
|
|
the proper line type to use (ie, leased or dial), and the
|
|
value of this object when examined via a GET or GETNEXT
|
|
request will reflect the line type determined by the system.
|
|
It will not return either primaryAuto(5) or secondaryAuto(6).
|
|
|
|
In order for any modifications to take effect,
|
|
the path must be enabled(re-enabled if it is already
|
|
enable).
|
|
|
|
This object's values are ignored for non-serial paths."
|
|
::= { a3ComPathDialEntry 2 }
|
|
|
|
a3ComPathDialCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
answerOriginate (1),
|
|
answerNoOriginate (2),
|
|
noAnswerOriginate (3),
|
|
noAnswerNoOriginate (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For those Paths for which the value of a3ComPathDialType
|
|
is primaryDial(2) or secondaryDial(3), this object
|
|
is used to control whether that Path may originate and/or
|
|
answer calls.
|
|
|
|
If this object has the value answerOriginate(1), this Path
|
|
can both answer and originate calls.
|
|
|
|
If this object has the value answerNoOriginate(2), this Path
|
|
can answer calls, but it is not allowed to originate them.
|
|
|
|
If this object has the value noAnswerOriginate(3), this
|
|
Path is not allowed to answer calls, but it is allowed to
|
|
originate them.
|
|
|
|
If this object has the value noAnswerNoOriginate(4), this
|
|
Path is not allowed to answer calls or originate them.
|
|
In order for any modifications to take effect, the path
|
|
must be enabled(re-enabled if it is already enable).
|
|
|
|
This object's values are ignored for non serial paths. "
|
|
::= { a3ComPathDialEntry 3 }
|
|
|
|
a3ComPathDialAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dial (1),
|
|
hangUp (2),
|
|
other (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to initiate an action to be taken
|
|
by the primary dial-up Path. If this is set to dial(1),
|
|
then the Path is brought up using the number stored by
|
|
a3ComPathDialNum. This is only allowed for primary
|
|
dial-up Paths.
|
|
|
|
If this is set to hangUp(2), then the dial-up Path
|
|
is brought down. This applies both to primary and
|
|
secondary paths.
|
|
|
|
If this object is read, the value other(3) will be returned."
|
|
::= { a3ComPathDialEntry 4 }
|
|
|
|
a3ComPathDialNum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..30))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object contains the telephone number of the
|
|
remote sit to be dialed. This is used whenever
|
|
a dial-up Path is brought up. Spaces and hyphens (-)
|
|
are allowed and ignored, and semi-colons (;) indicate
|
|
a delay (as supported by the modem).
|
|
|
|
If no number is specified by this object, then it
|
|
is assumed the modem will automatically dial a
|
|
preconfigured number when DTR is raised."
|
|
::= { a3ComPathDialEntry 5 }
|
|
|
|
a3ComPathDialDodIdleTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3600)
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object applies only to a path that is setup as a PrimaryDial
|
|
path in DialOnDemand mode. It defines the amount of time, in seconds,
|
|
to wait after detecting the lack of user traffic on the dial path,
|
|
before bringing the dial line down.
|
|
note: this object is replaced by a3ComPortDialDodIdleTime."
|
|
DEFVAL { 180 }
|
|
::= { a3ComPathDialEntry 6 }
|
|
|
|
|
|
a3ComPathDialMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v25Dial (1),
|
|
dtrDial (2),
|
|
autoV25 (3),
|
|
autoDTR (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used for setting/reading the Dial Mode of a dialup path.
|
|
|
|
Only values (1) and (2) can be set to the object:
|
|
If the object is (1), the dialup path is configured for V25 mode dialing.
|
|
If the object is (2), the dialup path is configured for DTR mode dialing.
|
|
This object cannot be set to autoV25(3) or autoDTR(4), as these are setup automatically
|
|
by the autostartup dial mode detection logic.
|
|
The path has to be (re)enabled for any new setting to take effect.
|
|
|
|
Reading of the object can return any 1 of the 4 values."
|
|
::= { a3ComPathDialEntry 7 }
|
|
|
|
a3ComPathDialDynCont OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static (1),
|
|
dynamic (2),
|
|
other (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to specify whether the dialup path is of
|
|
type static(1) or dynamic(3). If a path is made dynamic, it
|
|
will automatically be assigned(added) into the pool of dynamic
|
|
paths. Making a path static will cause it to be removed from the
|
|
pool."
|
|
DEFVAL { static }
|
|
::= { a3ComPathDialEntry 8 }
|
|
|
|
a3ComPathDialLocalDialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..30))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The telephone number assigned to the local ISDN unit. This number and the
|
|
local subaddress number, if present, are used primarily to determine if the
|
|
unit should answer an incoming call. Valid only for ISDN. Any ASCII
|
|
characters up to 40 are acceptable inputs, but only the valid IA5 characters
|
|
are used in the comparison.
|
|
The path has to be enabled for the new setting to take effect."
|
|
::= { a3ComPathDialEntry 9 }
|
|
|
|
a3ComPathDialLocalSubAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The subaddress number assigned to the local ISDN unit. If the local dial
|
|
number criterion passes, then the local subaddress number, if present, is
|
|
the next criterion used to determine if an incoming call should be answered.
|
|
Valid only for ISDN. Any ASCII characters are acceptable inputs, but only
|
|
the valid IA5 characters ( 0 to 9, #,* ) are used in the comparison.
|
|
The path has to be enabled for the new setting to take effect."
|
|
::= { a3ComPathDialEntry 10 }
|
|
|
|
a3ComPathDialSPIDDN1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..37))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Service Profile Identification number assigned by a North American ISDN
|
|
switch provider to identify the service profile of a ISDN unit. Valid
|
|
characters are numeric IA5 characters ( 0 to 9 ). Maximum number of
|
|
characters is 20.
|
|
The path has to be enabled for the new setting to take effect."
|
|
::= { a3ComPathDialEntry 11 }
|
|
|
|
a3ComPathDialSPIDDN2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..37))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The second Service Profile Identification number assigned by a North
|
|
American ISDN switch provider to identify the service profile of a ISDN
|
|
unit. Valid characters are numeric IA5 characters ( 0 to 9 ). Maximum
|
|
number of characters is 20.
|
|
The path has to be enabled for the new setting to take effect."
|
|
::= { a3ComPathDialEntry 12 }
|
|
|
|
a3ComPathDialRateAdaption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto (1),
|
|
rate64 (2),
|
|
rate56 (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the data rate to be used on the ISDN B channel. Rate64 and
|
|
Rate56 specify that the channel be connected at 64K or 56K, respectively.
|
|
The connection attempt would fail if the ISDN network does not support
|
|
this. If Auto is specified, an outgoing call is first attempted at 64K
|
|
and, if that should fail, the call is retried at 56K. On an incoming call,
|
|
the call is automatically adapted to the correct rate.
|
|
The path has to be enabled for the new setting to take effect."
|
|
::= { a3ComPathDialEntry 13 }
|
|
|
|
|
|
a3ComPathDialSwitchType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
etsi (1),
|
|
ntt (2),
|
|
ni1 (3),
|
|
att5ess (4),
|
|
dms100 (5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the ISDN switch type the unit is connected to.
|
|
|
|
The path has to be enabled for the new setting to take effect."
|
|
::= { a3ComPathDialEntry 14 }
|
|
|
|
a3ComPathDialExDevType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bri (1),
|
|
modem (2),
|
|
sw56 (3),
|
|
other (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object describes the external device type that is
|
|
connected to the serial-line type (eg, HSS, HDWAN) path. It is
|
|
applicable only for a dialup path.
|
|
|
|
Use bri(1) setting if the path is connected to a digital modem or
|
|
terminal adapter for ISDN connectivity.
|
|
|
|
Use modem(2) setting if the path is connected to an analog modem.
|
|
|
|
Use sw56(3) setting if the path is connected to a SWITCH56 CSU/DSU.
|
|
|
|
In order for any modifications to take effect, the path must be
|
|
enabled(re-enabled if it is already enable)."
|
|
DEFVAL { modem }
|
|
::= { a3ComPathDialEntry 15 }
|
|
|
|
--
|
|
-- This group contains all the PORT DIAL information
|
|
--
|
|
-- A port is assumed to be equivalent to an "interface" as
|
|
-- defined by MIB2. As such, additional information about
|
|
-- each port can be obtained from the interface group in
|
|
-- MIB2.
|
|
--
|
|
|
|
a3ComPortDIALNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of entries in the Port DIAL Table. These
|
|
correspond to attached or remotely connected
|
|
network segments."
|
|
::= { a3ComPortDial 1 }
|
|
|
|
a3ComPortDialTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComPortDialEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of attached or remotely connect
|
|
network segments."
|
|
::= { a3ComPortDial 2 }
|
|
|
|
a3ComPortDialEntry OBJECT-TYPE
|
|
SYNTAX A3ComPortDialEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
INDEX { a3ComPortDialIndex }
|
|
::= { a3ComPortDialTable 1 }
|
|
|
|
A3ComPortDialEntry ::= SEQUENCE {
|
|
a3ComPortDialIndex
|
|
INTEGER,
|
|
a3ComPortDialDisasterCtl
|
|
INTEGER,
|
|
a3ComPortDialBandOnDmnd
|
|
INTEGER,
|
|
a3ComPortDialDebounceTimeUp
|
|
INTEGER (0..3600),
|
|
a3ComPortDialDebounceTimeDown
|
|
INTEGER (0..3600),
|
|
a3ComPortDialInitState
|
|
INTEGER,
|
|
a3ComPortDialRcvrState
|
|
INTEGER,
|
|
a3ComPortDialAction
|
|
INTEGER,
|
|
a3ComPortDialDodIdleTime
|
|
INTEGER (1..3600),
|
|
a3ComPortDialIdleTime
|
|
INTEGER (0..3600),
|
|
a3ComPortDialDodCallsMade
|
|
Counter,
|
|
a3ComPortDialDodCallsFail
|
|
Counter,
|
|
a3ComPortDialDodUpTime
|
|
Counter,
|
|
a3ComPortDialDodPktsOut
|
|
Counter,
|
|
a3ComPortDialBODTHreshold
|
|
INTEGER
|
|
}
|
|
|
|
a3ComPortDialIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each port. This corresponds to ifIndex
|
|
for MIB II. The interface table from MIB II will contain
|
|
additional information for this port, including its type,
|
|
its name and its description."
|
|
::= { a3ComPortDialEntry 1 }
|
|
|
|
a3ComPortDialDisasterCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disasterRecovery (1),
|
|
noDisasterRecovery(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object applies only to those Ports to which
|
|
multiple Paths are assigned, at least one of which
|
|
is a dial-up Path.
|
|
|
|
If this is set to disasterRecovery(1), then this
|
|
Port will switch all its traffic to the secondary
|
|
Path if the primary Path goes down."
|
|
::= { a3ComPortDialEntry 2 }
|
|
|
|
a3ComPortDialBandOnDmnd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bandwidthOnDemand (1),
|
|
noBandwidthOnDemand (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object applies only to those Ports to which
|
|
multiple Paths are assigned, at least one of which
|
|
is a dial-up Path.
|
|
|
|
If this is set to bandwidthOnDemand(1), then this Port
|
|
will switch all its traffic to the secondary
|
|
Path if the primary Path exceeds a pre-defined
|
|
threshold."
|
|
::= { a3ComPortDialEntry 3 }
|
|
|
|
a3ComPortDialDebounceTimeUp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the amount of time, in seconds,
|
|
to wait after the primary Path has gone down before
|
|
bringing the secondary dial-up Path up.
|
|
|
|
If the primary Path stays in the down state for this
|
|
amount of time, the secondary, dial-up, Path is
|
|
brought up."
|
|
DEFVAL { 30 }
|
|
::= { a3ComPortDialEntry 4 }
|
|
|
|
a3ComPortDialDebounceTimeDown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the amount of time, in seconds,
|
|
to wait after the primary Path has come up before
|
|
bringing the secondary, dial-up, Path down.
|
|
|
|
If the primary Path remains in the up state for this
|
|
amount of time, the secondary, dial-up, Path is
|
|
brought down."
|
|
DEFVAL { 30 }
|
|
::= { a3ComPortDialEntry 5 }
|
|
|
|
a3ComPortDialInitState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noDialOut (1),
|
|
manualDial (2),
|
|
dialOnDemand (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object applies only to Ports which have paths setup as
|
|
PrimaryDial paths. It is used to configure the PrimaryDial
|
|
path as a dial initiator operating in one of the following modes:
|
|
|
|
noDialOut(1), which disables all dialing out on the path;
|
|
|
|
manualDial(2), which requires the user to actively bring
|
|
the dial path up; or
|
|
|
|
dialOnDemand(3), which will automatically bring the dial
|
|
path up whenever there is user traffic, and down after a
|
|
configurable period of idleness on the path.
|
|
|
|
In order for any modifications to take effect, the port
|
|
must be enabled (re-enabled if it is already enabled)."
|
|
::= { a3ComPortDialEntry 6 }
|
|
|
|
a3ComPortDialRcvrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAnswer (1),
|
|
answer (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object applies only to Ports which have paths setup as PrimaryDial
|
|
paths. It is used to configure the PrimaryDial path as a dial receiver
|
|
operating in one of the following modes:
|
|
|
|
noAnswer(1), which disallows incoming calls on the path; or
|
|
|
|
answer(2), which allows incoming calls on the path.
|
|
|
|
In order for any modifications to take effect, the port
|
|
must be enabled(re-enabled if it is already enabled). "
|
|
::= { a3ComPortDialEntry 7 }
|
|
|
|
|
|
a3ComPortDialAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dial (1),
|
|
hangUp (2),
|
|
other (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to initiate manual dial or hangup
|
|
action to be taken by the dialup port. If this is set to
|
|
dial(1), the port will attempt to dial out on its Primary
|
|
Dial path using the first destination phone number stored by
|
|
a3ComPortDialPhoneListPhoneNo. If no entry exists, then the
|
|
number stored by a3ComPathDialNum will be used.
|
|
If this is set to hangUp(2), then port will attempt to hangup
|
|
all its active dial paths.
|
|
|
|
If this object is read, the value other(3) will be returned."
|
|
::= { a3ComPortDialEntry 8 }
|
|
|
|
a3ComPortDialDodIdleTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3600)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object applies only to a port that is setup as a dial initiator
|
|
in DialOnDemand mode. It defines the amount of time, in seconds, to
|
|
wait after detecting the lack of user traffic on its primary dial path
|
|
before bringing the dial line down. This idle time applies each time
|
|
the path is brought down due to lack of user traffic, for the entire
|
|
duration that a port is operating in DialOnDemand mode."
|
|
DEFVAL { 180 }
|
|
::= { a3ComPortDialEntry 9 }
|
|
|
|
a3ComPortDialIdleTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object applies only to a port that is setup as a dial initiator
|
|
in ManualDial mode. It defines the amount of time, in seconds, to wait
|
|
after detecting the lack of user traffic on any of its active dial
|
|
path before bringing the path down. A value of 0 is used to denote
|
|
an infinite idle time."
|
|
DEFVAL { 180 }
|
|
::= { a3ComPortDialEntry 10 }
|
|
|
|
a3ComPortDialDodCallsMade OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The cumulative total number of outgoing calls successfully initiated
|
|
by the port operating in DialOnDemand mode."
|
|
::= { a3ComPortDialEntry 11 }
|
|
|
|
a3ComPortDialDodCallsFail OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The cumulative total number of outgoing calls unsuccessfully initiated
|
|
by the port operating in DialOnDemand mode."
|
|
::= { a3ComPortDialEntry 12 }
|
|
|
|
a3ComPortDialDodUpTime OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The cumulative length of time in seconds that the Primary path of a port
|
|
operating in DialOnDemand mode is Up."
|
|
::= { a3ComPortDialEntry 13 }
|
|
|
|
a3ComPortDialDodPktsOut OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The cumulative total number of user-data packets sent out by the port operating
|
|
in DialOnDemand mode."
|
|
::= { a3ComPortDialEntry 14 }
|
|
|
|
a3ComPortDialBODTHreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"%BODTHreshold% This object specifies the level of sensitivity to
|
|
bring up a BOD path for a port. The larger BODTHreshold value, the
|
|
less sensitive to bring up BOD path.
|
|
For DOD port, when the BODTHreshold is set to 0, the BOD path and the
|
|
primary path are treated as one path. The port will bring the two
|
|
paths up and down together.
|
|
|
|
Note, when this parameter is enabled/disabled, the port itself
|
|
must be disabled and then re-enabled for the new value to take
|
|
effect. This is done by setting the cirresponding instance of
|
|
ifAdminStatus to up(1)."
|
|
DEFVAL { 100 }
|
|
::= { a3ComPortDialEntry 15 }
|
|
|
|
--
|
|
-- This group contains all the PORT DIAL POOL PREFERENCE LIST information
|
|
--
|
|
-- A port is assumed to be equivalent to an "interface" as
|
|
-- defined by MIB2. As such, additional information about
|
|
-- each port can be obtained from the interface group in
|
|
-- MIB2.
|
|
--
|
|
|
|
|
|
a3ComPortDialPoolPrefTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComPortDialPoolPrefEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table representing the PoolPreference lists for dynamic
|
|
dialup ports. A PoolPreference list is a prioritized list of
|
|
dynamic dial paths that a port can use, and it is optional.
|
|
Each entry in the list is represented as a row in the table,
|
|
and it contains a dynamic dial path number and its priority-
|
|
postion in the list. Priority is in descending position order
|
|
and it specifies the preference of the port for a particular path.
|
|
All objects in this table are applicable only for a dynamic
|
|
dial port, ie, a port with an effective InCallerID, before these
|
|
objects are specified. "
|
|
::= { a3ComPortDial 3 }
|
|
|
|
a3ComPortDialPoolPrefEntry OBJECT-TYPE
|
|
SYNTAX A3ComPortDialPoolPrefEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
INDEX { a3ComPortDialPoolPrefPort, a3ComPortDialPoolPrefPathPos }
|
|
::= { a3ComPortDialPoolPrefTable 1 }
|
|
|
|
A3ComPortDialPoolPrefEntry ::= SEQUENCE {
|
|
a3ComPortDialPoolPrefPort
|
|
INTEGER,
|
|
a3ComPortDialPoolPrefPathPos
|
|
INTEGER,
|
|
a3ComPortDialPoolPrefPathNum
|
|
INTEGER,
|
|
a3ComPortDialPoolPrefStatus
|
|
RowStatus
|
|
}
|
|
|
|
a3ComPortDialPoolPrefPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the port number(portid), used as an index
|
|
together with a3ComPortDialPoolPrefPathPos, to select
|
|
a particular row entry."
|
|
::= { a3ComPortDialPoolPrefEntry 1 }
|
|
|
|
a3ComPortDialPoolPrefPathPos OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the position(priority) in the PoolPreference
|
|
list of a path, for the port. Used as an index together
|
|
with a3ComPortDialPoolPrefPort to select a particular
|
|
row entry."
|
|
::= { a3ComPortDialPoolPrefEntry 2 }
|
|
|
|
a3ComPortDialPoolPrefPathNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the path number(pathid) of a dynamic dial
|
|
path that will be taken out from the dynamic dial pool
|
|
and added into the PoolPreference list for the port."
|
|
::= { a3ComPortDialPoolPrefEntry 3 }
|
|
|
|
a3ComPortDialPoolPrefStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to add or delete a dynamic dial path
|
|
in the PoolPreference list of a port. Each path and its
|
|
position in the list is represented as a row. When adding
|
|
a new path, only the createAndGo method of adding a row
|
|
is supported. All essential elements of the row must be
|
|
specified in the same SET request PDU. They are: the
|
|
path number(a3ComPortDialPoolPrefPathNum), the path position
|
|
(specified by the instance identifier associated with
|
|
a3ComPortDialPoolPrefPathPos) and the port number (specified
|
|
by the instance identifier associated with
|
|
a3ComPortDialPoolPrefPort)."
|
|
::= { a3ComPortDialPoolPrefEntry 4 }
|
|
|
|
|
|
|
|
--
|
|
-- This group contains all the PORT DIAL PHONENUMBER LIST information
|
|
--
|
|
-- A port is assumed to be equivalent to an "interface" as
|
|
-- defined by MIB2. As such, additional information about
|
|
-- each port can be obtained from the interface group in
|
|
-- MIB2.
|
|
--
|
|
|
|
|
|
a3ComPortDialPhoneListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComPortDialPhoneListEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table representing the PhoneNo lists for dialup ports.
|
|
Setting up a PhoneNo list is optional for static dialup port,
|
|
but is required for dynamic dialup port.
|
|
A PhoneNo list is a prioritized list of destination phone
|
|
numbers that a port can use to dial out to. Each entry in
|
|
the list is represented as a row in the table and it contains
|
|
a phone number, the phone type, its baudrate and its priority
|
|
(position) in the list. Priority is in descending postion
|
|
order; and it specifies the preference of the port for a
|
|
particular phone number.
|
|
All objects in this table are applicable only for a dialup
|
|
port. "
|
|
::= { a3ComPortDial 4 }
|
|
|
|
a3ComPortDialPhoneListEntry OBJECT-TYPE
|
|
SYNTAX A3ComPortDialPhoneListEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
INDEX { a3ComPortDialPhoneListPort, a3ComPortDialPhoneListPos }
|
|
::= { a3ComPortDialPhoneListTable 1 }
|
|
|
|
A3ComPortDialPhoneListEntry ::= SEQUENCE {
|
|
a3ComPortDialPhoneListPort
|
|
INTEGER,
|
|
a3ComPortDialPhoneListPos
|
|
INTEGER,
|
|
a3ComPortDialPhoneListPhoneNo
|
|
DisplayString(SIZE(1..51)),
|
|
a3ComPortDialPhoneListType
|
|
INTEGER,
|
|
a3ComPortDialPhoneListBaud
|
|
INTEGER,
|
|
a3ComPortDialPhoneListStatus
|
|
RowStatus
|
|
}
|
|
|
|
a3ComPortDialPhoneListPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the port number(portid), used as an index
|
|
together with a3ComPortDialPhoneListPos, to select
|
|
a particular row entry."
|
|
::= { a3ComPortDialPhoneListEntry 1 }
|
|
|
|
a3ComPortDialPhoneListPos OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the position(priority) in the PhoneNo list of
|
|
a phone number, for this port. Used as an index
|
|
together with a3ComPortDialPhoneListPort, to select
|
|
a particular row entry."
|
|
::= { a3ComPortDialPhoneListEntry 2 }
|
|
|
|
a3ComPortDialPhoneListPhoneNo OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..51))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A text string representing a phone number in the PhoneNo list
|
|
of a port. The phone number is used as the destination phone
|
|
number to call for an outgoing call. In the case of an ISDN
|
|
dial line, this text string may also include the Subaddress
|
|
string following the phone number string, with a colon as a
|
|
separator between the two."
|
|
::= { a3ComPortDialPhoneListEntry 3 }
|
|
|
|
a3ComPortDialPhoneListType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
iSDN(1),
|
|
analog(2),
|
|
other(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to specify the phone type attribute of a phone number
|
|
in the PhoneNo list - either of type ISDN(1) or type Analog(2)
|
|
or other(3)."
|
|
DEFVAL { analog }
|
|
::= { a3ComPortDialPhoneListEntry 4 }
|
|
|
|
a3ComPortDialPhoneListBaud OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100000000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to specify the Baud rate attribute of a phone number in
|
|
the PhoneList."
|
|
DEFVAL { 9600 }
|
|
::= { a3ComPortDialPhoneListEntry 5 }
|
|
|
|
a3ComPortDialPhoneListStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to add or delete a phone number from the
|
|
PhoneNo list of a port. Each phone number and its associated
|
|
attributes (phone type, Baud rate, and priority-position) is
|
|
containned in a row. When adding a new phone number, only the
|
|
createAndGo method of adding row is supported. All essential
|
|
elements of the row must be specified in the same SET request
|
|
PDU. They are: phone number(a3ComPortDialPhoneListPhoneNo),
|
|
phone number position (specified by the instance identifier of
|
|
a3ComPortDialPhoneListPos), and the port number (specified by
|
|
the instance identifier of a3ComPortDialPhoneListPort)."
|
|
::= { a3ComPortDialPhoneListEntry 6 }
|
|
|
|
|
|
|
|
END
|
|
|