WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/mrv/OS-PROV-RFC2544-MIB

2635 lines
98 KiB
Plaintext
Raw Blame History

-- =======================================================================
-- File : osProvRfc2544.mib
-- Description : Private MIB support the functionality of RFC2544 in the
-- framework of Service Provision.
-- By : Alex
-- Copyright (c) 2008 MRV. All Rights Reserved.
--
--
-- Reproduction of this document is authorized on condition that this
-- copyright notice is included. This MRV SNMP MIB Specification
-- embodies MRV's proprietary intellectual property. MRV
-- retains all title and ownership in the specification, including any
-- revisions.
--
-- It is MRV's intent to encourage the widespread use of this
-- specification in connection with the management of MRV's
-- products. MRV grants vendor, end-users, and other interested
-- parties a non-exclusive license to use this specification in
-- connection with the management of MRV's products.
--
-- This specification is supplied "AS IS," and MRV makes no
-- warranty, either express or implied, as to the use, operation,
-- condition, or performance of the specification.
--
-- Copyright text courtesy of MRV
--
-- If you have any questions about this MIB, please call MRV
-- Technical Support Center at 1-800-858-7815 from inside USA or
-- 1-818-773-0900 from outside USA.
--
--
-- MRV retains the right to change this MIB without notification.
OS-PROV-RFC2544-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, DateAndTime,
MacAddress, DisplayString FROM SNMPv2-TC
oaOptiSwitch, EntityName, EntityNameOrNone,
EntryValidator, ProfileStatus,
ServFlowId,
PortIndexOrNone, PortList, RespType FROM OS-COMMON-TC-MIB
osEthServId FROM OS-ETH-SERV-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- RFC2851
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;
osProvRfc2544 MODULE-IDENTITY
LAST-UPDATED "202101150000Z" -- 15 Feb. 2021
ORGANIZATION "MRV Communications, Inc."
CONTACT-INFO
"Alex Rozin
MRV Communication, Inc
http://www.mrv.com
Email: ARozin@mrv.com"
DESCRIPTION
"RFC 2544 Benchmarking Methodology for Network Interconnect Devices."
REVISION "202101150000Z" -- 15 Feb. 2021
DESCRIPTION
"Added osProvRfc2544RsltAccumTable and osProvRfc2544HistAccumTable"
REVISION "202003030000Z" -- 03 March 2020
DESCRIPTION
"Destination-to-source jitters:
osProvRfc2544RsltDsJittMin, osProvRfc2544RsltDsJittMax,
osProvRfc2544RsltDsJittAverage, osProvRfc2544RsltDsJittSum2,
osProvRfc2544HistDsJittMin, osProvRfc2544HistDsJittMax,
osProvRfc2544HistDsJittAverage, osProvRfc2544HistDsJittSum2,
osProvRfc2544LengthDsJittMin, osProvRfc2544LengthDsJittMax,
osProvRfc2544LengthDsJittAverage, osProvRfc2544LengthDsJittSum2."
REVISION "201802010000Z" -- 01 Feb. 2018
DESCRIPTION
"Added support to multi source-mac address, object osProvRfc2544CfgSrcMacRange."
REVISION "201708060000Z" -- 06 Aug. 2017
DESCRIPTION
"1. Added the TestProtocol TEXTUAL-CONVENTION
2. The names of bits and description of osProvRfc2544ProtocolSupported have been changed.
3. The gbjects osProvRfc2544PrflProtocol, osProvRfc2544RsltProtocol,
osProvRfc2544HistProtocol and osProvRfc2544LengthProtocol have now syntax of TestProtocol."
REVISION "201111160000Z" -- 16 Nov. 2011
DESCRIPTION
"New object osProvRfc2544PrflLastError."
REVISION "201105240000Z"
DESCRIPTION
"1. New object osProvRfc2544CfgClear."
REVISION "201003030000Z"
DESCRIPTION
"Initial edition."
::= { oaOptiSwitch 11 }
-- ************************************************************
-- MIB place Definition
-- ************************************************************
osProvRfc2544Notifications OBJECT IDENTIFIER ::= { osProvRfc2544 0 }
osProvRfc2544Gen OBJECT IDENTIFIER ::= { osProvRfc2544 1 }
osProvRfc2544Capabilities OBJECT IDENTIFIER ::= { osProvRfc2544Gen 1 }
osProvRfc2544Conformance OBJECT IDENTIFIER ::= { osProvRfc2544 100 }
osProvRfc2544MIBCompliances OBJECT IDENTIFIER ::= { osProvRfc2544Conformance 1 }
osProvRfc2544MIBGroups OBJECT IDENTIFIER ::= { osProvRfc2544Conformance 2 }
-- ************************************************************
-- Textual converions
-- ************************************************************
TestType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the type of the test:
- throughput(2): The device sends a specific number of frames at a specific rate
and then count the replies. The frame loss ratios calculated. If this
frame loss ration is geater than osProvRfc2544AllwdPcktLoss the rate of the offered stream
is reduced and the test is rerun.
The throughput is the fastest rate at which the frame loss ration is not
greater than osProvRfc2544AllwdPcktLoss.
- latency(3): The device sends a stream of frames at a particular frame size at the
specific rate (usually this rate is equal to the throughput) to a specific
destination.
An identifying tag SHOULD be included in one frame after 60 seconds
with the type of tag being implementation dependent. The time at
which this frame is fully transmitted is recorded (timestamp A). The
receiver logic in the test equipment MUST recognize the tag
information in the frame stream and record the time at which the
tagged frame was received (timestamp B).
The latency is timestamp B minus timestamp A as per the relevant
definition frm RFC 1242, namely latency as defined for store and
forward devices or latency as defined for bit forwarding devices.
The report MUST state which definition of latency
was used for this test. The latency results SHOULD
be reported in the format of a table with a row for each of the
tested frame sizes. There SHOULD be columns for the frame size, the
rate at which the latency test was run for that frame size, for the
media types tested, and for the resultant latency values for each
type of data stream tested.
Frame sizes to be tested: 64, 128, 256, 512, 768, 1024, 1280, 1518.
- frameLossRate(4): The device sends a specific number of frames at a specific rate
through and count the frames that are received. The frame loss
rate at each point is calculated using the following equation:
( ( input_count - output_count ) * 100 ) / input_count
The first trial SHOULD be run for the frame rate that corresponds to
100% of the maximum rate for the frame size on the input media.
Repeat the procedure for the rate that corresponds to 90% of the
maximum rate used and then for 80% of this rate. This sequence
SHOULD be continued (at reducing 10% intervals) until there are two
successive trials in which no frames are lost. The maximum
granularity of the trials MUST be 10% of the maximum rate, a finer
granularity is encouraged.
- basic (5): The device sends specific number of specific bursts. Round trip delay, jitters and
frame loss ratio are calculated for all bursts.
This type of test is not defined in RFC2544."
REFERENCE
"RFC 2544, Clause 26."
SYNTAX INTEGER {
unknown (1),
throughput (2),
latency (3),
frameLossRate(4),
basic (5)
}
TestRunState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the running state of the Test:
notRunning (1) - Test is not active,
running (2) - Test is running,
waitInQueue (3) - Test is waiting for hardware resources,
readyForRun (4) - Test have received hardware resource and ready to run,
idle (5) - Test is waiting for the next burst."
REFERENCE
"."
SYNTAX INTEGER {
notRunning (1),
running (2),
waitInQueue (3),
readyForRun (4),
idle (5)
}
TestProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Protocol of a test.
In Legacy OS these values mean:
l2Protocol - dmmITUtY1731 (2), -- ITU-T Y.1721
l3Protocol - icmpEcho (5) -- RFC792
In OSA-V* these values mean:
l2Protocol - LBM and selectively DMM
l3Protocol - icmpEcho
"
REFERENCE
"."
SYNTAX INTEGER {
unknown (1),
l2Protocol (2), -- ITU-T Y.1721
l3Protocol (5) -- RFC792
}
-- *******************************************************************
-- osProvRfc2544Capabilities global configuration, status & capatibilities
-- *******************************************************************
osProvRfc2544ProtocolSupported OBJECT-TYPE
SYNTAX BITS
{
l2Supported (0),
l3Supported (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates protocols supported by this agent:
l2Supported(0) means that l2Protocol of ITU-T Y.1721 is supported;
l3Supported(1) means that l2Protocol of RFC792 is supported
Additionally this object serves as a SupportValue."
::= { osProvRfc2544Capabilities 1 }
osProvRfc2544TestTypesSupported OBJECT-TYPE
SYNTAX BITS
{
throughput (0),
latency (1),
frameLossRate(2),
basic (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates types of tests, that supported by this agent."
::= { osProvRfc2544Capabilities 2 }
osRfc2544IpAddrTypesSupported OBJECT-TYPE
SYNTAX BITS
{
ipv4 (0),
ipv6 (1),
ipv4z (2),
ipv6z (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates types of supported Internet address In terms of RFC 3291 (INET-ADDRESS-MIB)."
::= { osProvRfc2544Capabilities 3 }
osProvRfc2544MinRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbits/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum positive value for osProvRfc2544Rate, supported by the aggent."
::= { osProvRfc2544Capabilities 4 }
osProvRfc2544MaxRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbits/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum value for osProvRfc2544Rate, supported by the aggent."
::= { osProvRfc2544Capabilities 5 }
osProvRfc2544MaxNumOfLengths OBJECT-TYPE
SYNTAX Unsigned32
UNITS "rows"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of rows in osProvRfc2544LngthsSetTable (minimum number is equal to '1')."
::= { osProvRfc2544Capabilities 6 }
osProvRfc2544TholdReason OBJECT-TYPE
SYNTAX INTEGER {
risingAlarm(1),
fallingAlarm(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544Gen 2 }
-- ************************************************************
-- The osProvRfc2544PrflTable Table - profiles of configurations
-- ************************************************************
osProvRfc2544PrflTable OBJECT-TYPE
SYNTAX SEQUENCE OF OsProvRfc2544PrflEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains RFC2544 Profiles."
::= { osProvRfc2544 4 }
osProvRfc2544PrflEntry OBJECT-TYPE
SYNTAX OsProvRfc2544PrflEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains an entry of the table."
INDEX { osProvRfc2544PrflId }
::= { osProvRfc2544PrflTable 1 }
OsProvRfc2544PrflEntry ::= SEQUENCE {
osProvRfc2544PrflId EntityName,
osProvRfc2544PrflTestType TestType,
osProvRfc2544PrflProtocol TestProtocol,
osProvRfc2544PrflBurstNumber Unsigned32,
osProvRfc2544PrflBurstInterval Unsigned32,
osProvRfc2544PrflProbeNumber Unsigned32,
osProvRfc2544PrflDuration Unsigned32,
osProvRfc2544PrflProbeInterval Unsigned32,
osProvRfc2544PrflRate Unsigned32,
osProvRfc2544PrflProbeTimeout Unsigned32,
osProvRfc2544PrflAllwdPcktLoss Unsigned32,
osProvRfc2544PrflMinStep Unsigned32,
osProvRfc2544PrflPacketLength Unsigned32,
osProvRfc2544PrflDataFill OCTET STRING,
osProvRfc2544PrflTtl Unsigned32,
osProvRfc2544PrflMaxRows Unsigned32,
osProvRfc2544PrflTrapsGeneration BITS,
osProvRfc2544PrflFdRise Unsigned32,
osProvRfc2544PrflFdFall Unsigned32,
osProvRfc2544PrflJittRise Unsigned32,
osProvRfc2544PrflJittFall Unsigned32,
osProvRfc2544PrflPcktLossRise Unsigned32,
osProvRfc2544PrflPcktLossFall Unsigned32,
osProvRfc2544PrflLastError DisplayString,
osProvRfc2544PrflAdminStatus EntryValidator,
osProvRfc2544PrflOperStatus ProfileStatus
}
osProvRfc2544PrflId OBJECT-TYPE
SYNTAX EntityName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544PrflEntry 2 }
osProvRfc2544PrflTestType OBJECT-TYPE
SYNTAX TestType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"."
DEFVAL { unknown }
::= { osProvRfc2544PrflEntry 4 }
osProvRfc2544PrflProtocol OBJECT-TYPE
SYNTAX TestProtocol
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol of a test."
DEFVAL { unknown }
::= { osProvRfc2544PrflEntry 5 }
osProvRfc2544PrflBurstNumber OBJECT-TYPE
SYNTAX Unsigned32 (0|1..4294967295)
UNITS "bursts"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of bursts. The value 0 means forever."
DEFVAL { 1 }
::= { osProvRfc2544PrflEntry 16 }
osProvRfc2544PrflBurstInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..86400)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval between bursts, in seconds."
DEFVAL { 60 }
::= { osProvRfc2544PrflEntry 17 }
osProvRfc2544PrflProbeNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..1000000)
UNITS "messages"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of packets (probes) in a burst. If osProvRfc2544Duration is not equal to 0,
this object does not make sense and is not used.
Objects osProvRfc2544ProbeNumber and osProvRfc2544Duration DO NOT NECESSARILY CORRESPOND
TO EACH OTHER on GET operation.
GET operation always returns the last configured or default value."
DEFVAL { 3 }
::= { osProvRfc2544PrflEntry 21 }
osProvRfc2544PrflDuration OBJECT-TYPE
SYNTAX Unsigned32 (0|1..3600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Duration of one burst. The value 0 means, that osProvRfc2544ProbeNumber will be used.
Objects osProvRfc2544ProbeNumber and osProvRfc2544Duration DO NOT NECESSARILY CORRESPOND
TO EACH OTHER on GET operation.
GET operation always returns the last configured or default value."
DEFVAL { 0 }
::= { osProvRfc2544PrflEntry 22 }
osProvRfc2544PrflProbeInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..1000000)
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval between transmitted frames in a burst.
This object is not used if osProvRfc2544Rate is not equal to 0.
Objects osProvRfc2544ProbeInterval and osProvRfc2544Rate DO NOT NECESSARILY CORRESPOND
TO EACH OTHER on GET operation.
GET operation always returns the last configured or default value."
DEFVAL { 100000 }
::= { osProvRfc2544PrflEntry 24 }
osProvRfc2544PrflRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbits/sec"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The rate of transmition frames in bursts. The value 0 means, that osProvRfc2544ProbeInterval will be used.
Objects osProvRfc2544ProbeInterval and osProvRfc2544Rate DO NOT NECESSARILY CORRESPOND
TO EACH OTHER on GET operation.
GET operation always returns the last configured or default value."
DEFVAL { 0 }
::= { osProvRfc2544PrflEntry 25 }
osProvRfc2544PrflProbeTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..60000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration to wait for a responce (milliseconds)."
DEFVAL { 200 }
::= { osProvRfc2544PrflEntry 26 }
osProvRfc2544PrflAllwdPcktLoss OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
UNITS "0.01%"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum loss ratio allowed in the throughput test."
DEFVAL { 0 }
::= { osProvRfc2544PrflEntry 28 }
osProvRfc2544PrflMinStep OBJECT-TYPE
SYNTAX Unsigned32 (1..1000000)
UNITS "Kbits/sec"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum rate step in the throughput test."
DEFVAL { 1000 }
::= { osProvRfc2544PrflEntry 29 }
osProvRfc2544PrflPacketLength OBJECT-TYPE
SYNTAX Unsigned32 (64..9216)
UNITS "octets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Packet length, including VLAN ID and CRC.
For throughput(2) and latency(3) returns first value from osProvRfc2544LengthValue as a reply on GET operation
and rejects SET operation."
DEFVAL { 68 }
::= { osProvRfc2544PrflEntry 32 }
osProvRfc2544PrflDataFill OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determine how to fill the data portion of a probe
packet, while number of characters is a multiple of 8."
DEFVAL { ''H }
::= { osProvRfc2544PrflEntry 35 }
osProvRfc2544PrflTtl OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time To Live."
DEFVAL { 128 }
::= { osProvRfc2544PrflEntry 37 }
osProvRfc2544PrflMaxRows OBJECT-TYPE
SYNTAX Unsigned32 (2..65535)
UNITS "rows"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of entries allowed in the
osProvRfc2544HistTable. An implementation of this
MIB will remove the oldest entry in the
osProvRfc2544HistTable to allow the addition of an
new entry once the number of rows in the
osProvRfc2544HistTable reaches this value.
Old entries are not removed when a new test is
started. Entries are added to the osProvRfc2544HistTable
until pingFlowMaxRows is reached before entries begin to
be removed.
A value of 0 for this object disables creation of
osProvRfc2544HistTable entries."
DEFVAL { 10 }
::= { osProvRfc2544PrflEntry 50 }
osProvRfc2544PrflTrapsGeneration OBJECT-TYPE
SYNTAX BITS {
burstComplete(0),
burstFail (1),
testComplete (2),
rtt (3),
jitter (4),
pcktLoss (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object determines when and if
to generate a notification for this entry:
burstComplete(0)- Generate a osProvRfc2544BurstComplete notification.
burstFail(1) - Generate a osProvRfc2544BurstFail notification.
testComplete(2) - Generate a osProvRfc2544TestComplete notification.
rtt(3) - Generate a traps about osProvRfc2544RsltRttAverage crossing its thresholds.
jitter(4) - Generate a traps about osProvRfc2544RsltJittAverage crossing its thresholds.
pcktLoss(5) - Generate a traps about osProvRfc2544RsltPcktLoss crossing its thresholds."
DEFVAL { {} }
::= { osProvRfc2544PrflEntry 55 }
-- 456789z123456789b123456789c123456789
osProvRfc2544PrflFdRise OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Frame delay (Average of Round Trip Time) Rising threshold.
Value 0 means, that this the agent will not check this type of threshold."
DEFVAL { 0 }
::= { osProvRfc2544PrflEntry 60 }
osProvRfc2544PrflFdFall OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Frame delay (Average of Round Trip Time) Falling threshold"
DEFVAL { 0 }
::= { osProvRfc2544PrflEntry 61 }
osProvRfc2544PrflJittRise OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Jitter Rising threshold.
Value 0 means, that this the agent will not check this type of threshold."
DEFVAL { 0 }
::= { osProvRfc2544PrflEntry 62 }
osProvRfc2544PrflJittFall OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Jitter Falling threshold."
DEFVAL { 0 }
::= { osProvRfc2544PrflEntry 63 }
osProvRfc2544PrflPcktLossRise OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.01%"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The packet loss Rising threshold."
DEFVAL { 0 }
::= { osProvRfc2544PrflEntry 64 }
osProvRfc2544PrflPcktLossFall OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.01%"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The packet loss Falling threshold."
DEFVAL { 0 }
::= { osProvRfc2544PrflEntry 65 }
osProvRfc2544PrflLastError OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..160))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544PrflEntry 97 }
osProvRfc2544PrflAdminStatus OBJECT-TYPE
SYNTAX EntryValidator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allows to create new rows or delete old rows."
::= { osProvRfc2544PrflEntry 98 }
osProvRfc2544PrflOperStatus OBJECT-TYPE
SYNTAX ProfileStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544PrflEntry 99 }
-- ************************************************************
-- The osProvRfc2544LngthsSetTable Table - Lengths sets for tests
-- ************************************************************
osProvRfc2544LngthsSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF OsProvRfc2544LngthsSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains RFC2544 Profiles."
::= { osProvRfc2544 5 }
osProvRfc2544LngthsSetEntry OBJECT-TYPE
SYNTAX OsProvRfc2544LngthsSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains an entry of the table."
INDEX { osProvRfc2544PrflId, osProvRfc2544LngthsSetValue }
::= { osProvRfc2544LngthsSetTable 1 }
OsProvRfc2544LngthsSetEntry ::= SEQUENCE {
osProvRfc2544LngthsSetValue Unsigned32,
osProvRfc2544LngthsSetAdmStatus EntryValidator
}
osProvRfc2544LngthsSetValue OBJECT-TYPE
SYNTAX Unsigned32 (64..9216)
UNITS "octets"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Packet length including VLAN-id and CRC."
::= { osProvRfc2544LngthsSetEntry 4 }
osProvRfc2544LngthsSetAdmStatus OBJECT-TYPE
SYNTAX EntryValidator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allows to create new rows or delete old rows."
::= { osProvRfc2544LngthsSetEntry 98 }
-- ************************************************************
-- The osProvRfc2544CfgTable Table - configuration
-- ************************************************************
osProvRfc2544CfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF OsProvRfc2544CfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rfc2544 service configuration table."
::= { osProvRfc2544 7 }
osProvRfc2544CfgEntry OBJECT-TYPE
SYNTAX OsProvRfc2544CfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains an entry of the table."
INDEX { osEthServId, osProvRfc2544CfgFlowId }
::= { osProvRfc2544CfgTable 1 }
OsProvRfc2544CfgEntry ::= SEQUENCE {
osProvRfc2544CfgFlowId ServFlowId,
osProvRfc2544CfgPrfl EntityNameOrNone,
osProvRfc2544CfgDstMac MacAddress,
osProvRfc2544CfgSrcMac MacAddress,
osProvRfc2544CfgSrcMacRange PortList,
osProvRfc2544CfgDstIpType InetAddressType,
osProvRfc2544CfgDstIpAddr InetAddress,
osProvRfc2544CfgTxPort PortIndexOrNone,
osProvRfc2544CfgTos Unsigned32,
osProvRfc2544CfgEnabled TruthValue,
osProvRfc2544CfgClear TruthValue
}
osProvRfc2544CfgFlowId OBJECT-TYPE
SYNTAX ServFlowId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value 0 means, that this entry corresponds to the service, not to to any flow.
If this object is not equal to 0, it means CoS of a flow."
::= { osProvRfc2544CfgEntry 3 }
osProvRfc2544CfgPrfl OBJECT-TYPE
SYNTAX EntityNameOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Refers to an entry in osProvRfc2544PrflTable. If osProvRfc2544CfgPrfl
is empty, then default values are used."
-- DEFVAL { }
::= { osProvRfc2544CfgEntry 4 }
osProvRfc2544CfgDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then osProvRfc2544DstMac must be defined
with a host physical address to be used as a remote host for performing an operation.
If osProvRfc2544PrflProtocol is equal to l3Protocol(5), then the test cannot be enabled if osProvRfc2544CfgDstMac
is not equal to 00:00:00:00:00:00."
DEFVAL { '000000000000'H }
::= { osProvRfc2544CfgEntry 6 }
osProvRfc2544CfgSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then osProvRfc2544CfgSrcMac must be defined.
If configured, override osProvRfc2544CfgSrcMacRange value.
If osProvRfc2544PrflProtocol is equal to l3Protocol(5), then the test cannot be enabled if osProvRfc2544CfgSrcMac
is not equal to 00:00:00:00:00:00."
DEFVAL { '000000000000'H }
::= { osProvRfc2544CfgEntry 7 }
osProvRfc2544CfgSrcMacRange OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines customer source-mac range, i.e. multi source-mac addresses based on machine source-mac
changing the thrid byte corresponding to the configured range.
This parameter overwrite osProvRfc2544CfgSrcMac parameter. If source-mac was configured before setting this value,
then after deleting this value the previous source-mac value will set instead.
Corresponds to cli command 'source-mac range'."
DEFVAL { "" }
::= { osProvRfc2544CfgEntry 8 }
osProvRfc2544CfgDstIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of host address to be used at a remote
host for performing an operation."
DEFVAL { ipv4 }
::= { osProvRfc2544CfgEntry 10 }
osProvRfc2544CfgDstIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then he test cannot be enabled if osProvRfc2544DstIpAddr
is not equal to 0.0.0.0.
If osProvRfc2544PrflProtocol is equal to l3Protocol(5), then osProvRfc2544DstIpAddr must be defined
with a host Layer 3 address to be used as a remote host for performing an operation."
DEFVAL { '00000000'H }
::= { osProvRfc2544CfgEntry 11 }
osProvRfc2544CfgTxPort OBJECT-TYPE
SYNTAX PortIndexOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then osProvRfc2544TxPort may be defined
and used when osProvRfc2544CfgDstMac is absent in learning table (FDB) to determine the port,
from wich the requests are to be transmitted.
If osProvRfc2544PrflProtocol is equal to l3Protocol(5), then the test cannot be enabled if osProvRfc2544TxPort
is not equal to 0."
DEFVAL { 0 }
::= { osProvRfc2544CfgEntry 14 }
osProvRfc2544CfgTos OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the ping probe. The DS Field is defined
as the Type of Service (TOS) octet in a IPv4 header
or as the Traffic Class octet in a IPv6 header.
The value of this object must be a decimal integer
in the range from 0 to 255. This option can be used
to determine what effect an explicit DS Field setting
has on a ping response. Not all values are legal or
meaningful. A value of 0 means that the function
represented by this option is not supported. DS Field
usage is often not supported by IP implementations and
not all values are supported. Refer to RFC 2474 for
guidance on usage of this field."
REFERENCE
"Refer to RFC 2474 for the definition of the
Differentiated Services Field and to RFC 1812
Section 5.3.2 for Type of Service (TOS).
The desription has been copied form DISMAN-PING-MIB, "
DEFVAL { 0 }
::= { osProvRfc2544CfgEntry 15 }
osProvRfc2544CfgEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To start/stop Performance test."
DEFVAL { false }
::= { osProvRfc2544CfgEntry 20 }
osProvRfc2544CfgClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object when written clears the osProvRfc2544HistTable history tables
- all rows are deleted. When read the value always returns 'false'.
Writing this object at row creation is irrelevant and should not
be done. "
DEFVAL { false }
::= { osProvRfc2544CfgEntry 21 }
-- ************************************************************
-- The osProvRfc2544RsltTable - last complete result
-- ************************************************************
osProvRfc2544RsltTable OBJECT-TYPE
SYNTAX SEQUENCE OF OsProvRfc2544RsltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contain the last completed burst results. Exception is the object osProvRfc2544RsltTestRunState - it
indicates a current state of the test."
::= { osProvRfc2544 10 }
osProvRfc2544RsltEntry OBJECT-TYPE
SYNTAX OsProvRfc2544RsltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains an entry of the osProvRfc2544RsltTable table."
AUGMENTS { osProvRfc2544CfgEntry }
::= { osProvRfc2544RsltTable 1 }
OsProvRfc2544RsltEntry ::= SEQUENCE {
osProvRfc2544RsltStarted DateAndTime,
osProvRfc2544RsltTestType TestType,
osProvRfc2544RsltRespType RespType,
osProvRfc2544RsltTestRunState TestRunState,
osProvRfc2544RsltProtocol TestProtocol,
osProvRfc2544RsltDstMac MacAddress,
osProvRfc2544RsltSrcMac MacAddress,
osProvRfc2544RsltIpDstType InetAddressType,
osProvRfc2544RsltIpDstAddr InetAddress,
osProvRfc2544RsltTxPort PortIndexOrNone,
osProvRfc2544RsltTransmitted Unsigned32,
osProvRfc2544RsltReceived Unsigned32,
osProvRfc2544RsltRttMin Unsigned32,
osProvRfc2544RsltRttMax Unsigned32,
osProvRfc2544RsltRttAverage Unsigned32,
osProvRfc2544RsltRttSum2 Unsigned32,
osProvRfc2544RsltJittMin Unsigned32,
osProvRfc2544RsltJittMax Unsigned32,
osProvRfc2544RsltJittAverage Unsigned32,
osProvRfc2544RsltJittSum2 Unsigned32,
osProvRfc2544RsltDsJittMin Unsigned32,
osProvRfc2544RsltDsJittMax Unsigned32,
osProvRfc2544RsltDsJittAverage Unsigned32,
osProvRfc2544RsltDsJittSum2 Unsigned32,
osProvRfc2544RsltPcktLoss Unsigned32,
osProvRfc2544RsltProbeInterval Unsigned32,
osProvRfc2544RsltRate Unsigned32,
osProvRfc2544RsltPacketLength Unsigned32
}
osProvRfc2544RsltStarted OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp, when this test has been started."
::= { osProvRfc2544RsltEntry 4 }
osProvRfc2544RsltTestType OBJECT-TYPE
SYNTAX TestType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544RsltEntry 5 }
osProvRfc2544RsltRespType OBJECT-TYPE
SYNTAX RespType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544RsltEntry 6 }
osProvRfc2544RsltTestRunState OBJECT-TYPE
SYNTAX TestRunState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544RsltEntry 7 }
osProvRfc2544RsltProtocol OBJECT-TYPE
SYNTAX TestProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol of a test."
::= { osProvRfc2544RsltEntry 8 }
osProvRfc2544RsltDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop."
::= { osProvRfc2544RsltEntry 10 }
osProvRfc2544RsltSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface."
::= { osProvRfc2544RsltEntry 11 }
osProvRfc2544RsltIpDstType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType."
::= { osProvRfc2544RsltEntry 12 }
osProvRfc2544RsltIpDstAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr."
::= { osProvRfc2544RsltEntry 13 }
osProvRfc2544RsltTxPort OBJECT-TYPE
SYNTAX PortIndexOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544RsltEntry 16 }
osProvRfc2544RsltTransmitted OBJECT-TYPE
SYNTAX Unsigned32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of request packets transmitted the burst."
::= { osProvRfc2544RsltEntry 21 }
osProvRfc2544RsltReceived OBJECT-TYPE
SYNTAX Unsigned32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of reply packets received in the burst."
::= { osProvRfc2544RsltEntry 22 }
osProvRfc2544RsltRttMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round-trip-time (RTT) received."
::= { osProvRfc2544RsltEntry 23 }
osProvRfc2544RsltRttMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round-trip-time (RTT) received."
::= { osProvRfc2544RsltEntry 24 }
osProvRfc2544RsltRttAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average round-trip-time (RTT) received."
::= { osProvRfc2544RsltEntry 25 }
osProvRfc2544RsltRttSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544RsltEntry 26 }
osProvRfc2544RsltJittMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of all source-to-destination jitter values."
::= { osProvRfc2544RsltEntry 30 }
osProvRfc2544RsltJittMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mahimum value of all source-to-destination jitter values."
::= { osProvRfc2544RsltEntry 32 }
osProvRfc2544RsltJittAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of all source-to-destination jitter values."
::= { osProvRfc2544RsltEntry 33 }
osProvRfc2544RsltJittSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all source-to-destination
jitter values. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544RsltEntry 34 }
osProvRfc2544RsltDsJittMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of all destination-to-source jitter values."
::= { osProvRfc2544RsltEntry 35 }
osProvRfc2544RsltDsJittMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mahimum value of all destination-to-source jitter values."
::= { osProvRfc2544RsltEntry 36 }
osProvRfc2544RsltDsJittAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of all destination-to-source jitter values."
::= { osProvRfc2544RsltEntry 37 }
osProvRfc2544RsltDsJittSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all destination-to-source
jitter values. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544RsltEntry 38 }
osProvRfc2544RsltPcktLoss OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.01%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calculation of packet loss value."
::= { osProvRfc2544RsltEntry 40 }
osProvRfc2544RsltProbeInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between packets.
Objects osProvRfc2544RsltProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as equal to 0, then agent returns osProvRfc2544ProbeInterval
equal to osProvRfc2544RsltProbeInterval.
If osProvRfc2544Rate has been configured as not equal to 0, then agent calculates interval
between packets, corresponding to osProvRfc2544Rate and returns it
as osProvRfc2544RsltProbeInterval."
::= { osProvRfc2544RsltEntry 46 }
osProvRfc2544RsltRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbits/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of transmition frames in bursts.
Objects osProvRfc2544RsltProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as not equal to 0, then
agent returns osProvRfc2544RsltRate equal to osProvRfc2544Rate.
If osProvRfc2544Rate has been configured as equal to 0, then agent calculates
rate, corresponding to osProvRfc2544ProbeInterval and returns it as osProvRfc2544RsltRate."
::= { osProvRfc2544RsltEntry 47 }
osProvRfc2544RsltPacketLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is equal to corresponding osProvRfc2544PacketLength."
::= { osProvRfc2544RsltEntry 48 }
-- ************************************************************
-- The osProvRfc2544HistTable - history table
-- ************************************************************
osProvRfc2544HistTable OBJECT-TYPE
SYNTAX SEQUENCE OF OsProvRfc2544HistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contain at most last osProvRfc2544MaxRows samples, each of them reflects results of
comleted burst."
::= { osProvRfc2544 11 }
osProvRfc2544HistEntry OBJECT-TYPE
SYNTAX OsProvRfc2544HistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains an entry of the osProvRfc2544HistTable table."
INDEX { osEthServId, osProvRfc2544CfgFlowId, osProvRfc2544HistIndex }
::= { osProvRfc2544HistTable 1 }
OsProvRfc2544HistEntry ::= SEQUENCE {
osProvRfc2544HistIndex Unsigned32,
osProvRfc2544HistStarted DateAndTime,
osProvRfc2544HistTestType TestType,
osProvRfc2544HistRespType RespType,
osProvRfc2544HistProtocol TestProtocol,
osProvRfc2544HistDstMac MacAddress,
osProvRfc2544HistSrcMac MacAddress,
osProvRfc2544HistIpDstType InetAddressType,
osProvRfc2544HistIpDstAddr InetAddress,
osProvRfc2544HistTxPort PortIndexOrNone,
osProvRfc2544HistTransmitted Unsigned32,
osProvRfc2544HistReceived Unsigned32,
osProvRfc2544HistRttMin Unsigned32,
osProvRfc2544HistRttMax Unsigned32,
osProvRfc2544HistRttAverage Unsigned32,
osProvRfc2544HistRttSum2 Unsigned32,
osProvRfc2544HistJittMin Unsigned32,
osProvRfc2544HistJittMax Unsigned32,
osProvRfc2544HistJittAverage Unsigned32,
osProvRfc2544HistJittSum2 Unsigned32,
osProvRfc2544HistDsJittMin Unsigned32,
osProvRfc2544HistDsJittMax Unsigned32,
osProvRfc2544HistDsJittAverage Unsigned32,
osProvRfc2544HistDsJittSum2 Unsigned32,
osProvRfc2544HistPcktLoss Unsigned32,
osProvRfc2544HistProbeInterval Unsigned32,
osProvRfc2544HistRate Unsigned32,
osProvRfc2544HistPacketLength Unsigned32
}
osProvRfc2544HistIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same osProvRfc2544CfgEntry.
This index starts at 1 and increases by one
as each new sample is taken."
REFERENCE
"."
::= { osProvRfc2544HistEntry 3 }
osProvRfc2544HistStarted OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp, when this test has been started."
::= { osProvRfc2544HistEntry 4 }
osProvRfc2544HistTestType OBJECT-TYPE
SYNTAX TestType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544HistEntry 5 }
osProvRfc2544HistRespType OBJECT-TYPE
SYNTAX RespType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544HistEntry 6 }
osProvRfc2544HistProtocol OBJECT-TYPE
SYNTAX TestProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol of a test."
::= { osProvRfc2544HistEntry 8 }
osProvRfc2544HistDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop."
::= { osProvRfc2544HistEntry 10 }
osProvRfc2544HistSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface."
::= { osProvRfc2544HistEntry 11 }
osProvRfc2544HistIpDstType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType."
::= { osProvRfc2544HistEntry 12 }
osProvRfc2544HistIpDstAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr."
::= { osProvRfc2544HistEntry 13 }
osProvRfc2544HistTxPort OBJECT-TYPE
SYNTAX PortIndexOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544HistEntry 16 }
osProvRfc2544HistTransmitted OBJECT-TYPE
SYNTAX Unsigned32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of request packets transmitted the burst."
::= { osProvRfc2544HistEntry 21 }
osProvRfc2544HistReceived OBJECT-TYPE
SYNTAX Unsigned32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of reply packets received in the burst."
::= { osProvRfc2544HistEntry 22 }
osProvRfc2544HistRttMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round-trip-time (RTT) received."
::= { osProvRfc2544HistEntry 23 }
osProvRfc2544HistRttMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round-trip-time (RTT) received."
::= { osProvRfc2544HistEntry 24 }
osProvRfc2544HistRttAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average round-trip-time (RTT) received."
::= { osProvRfc2544HistEntry 25 }
osProvRfc2544HistRttSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544HistEntry 26 }
osProvRfc2544HistJittMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of all source-to-destination jitter values."
::= { osProvRfc2544HistEntry 30 }
osProvRfc2544HistJittMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mahimum value of all source-to-destination jitter values."
::= { osProvRfc2544HistEntry 32 }
osProvRfc2544HistJittAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of all source-to-destination jitter values."
::= { osProvRfc2544HistEntry 33 }
osProvRfc2544HistJittSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all source-to-destination
jitter values. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544HistEntry 34 }
osProvRfc2544HistDsJittMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of all destination-to-source jitter values."
::= { osProvRfc2544HistEntry 35 }
osProvRfc2544HistDsJittMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mahimum value of all destination-to-source jitter values."
::= { osProvRfc2544HistEntry 36 }
osProvRfc2544HistDsJittAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of all destination-to-source jitter values."
::= { osProvRfc2544HistEntry 37 }
osProvRfc2544HistDsJittSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all destination-to-source
jitter values. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544HistEntry 38 }
osProvRfc2544HistPcktLoss OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.01%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calculation of packet loss value."
::= { osProvRfc2544HistEntry 40 }
--3456789a123456789b123456789c12 6789d123456789e123456789f123456789g123456789
osProvRfc2544HistProbeInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between packets.
Objects osProvRfc2544HistProbeInterval and osProvRfc2544HistRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as equal to 0, then agent returns osProvRfc2544ProbeInterval
equal to osProvRfc2544HistProbeInterval.
If osProvRfc2544Rate has been configured as not equal to 0, then agent calculates interval
between packets, corresponding to osProvRfc2544Rate and returns it
as osProvRfc2544HistProbeInterval."
::= { osProvRfc2544HistEntry 46 }
osProvRfc2544HistRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbits/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of transmition frames in bursts.
Objects osProvRfc2544HistProbeInterval and osProvRfc2544HistRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as not equal to 0, then
agent returns osProvRfc2544HistRate equal to osProvRfc2544Rate.
If osProvRfc2544Rate has been configured as equal to 0, then agent calculates
rate, corresponding to osProvRfc2544ProbeInterval and returns it as osProvRfc2544HistRate."
::= { osProvRfc2544HistEntry 47 }
osProvRfc2544HistPacketLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is equal to corresponding osProvRfc2544PacketLength."
::= { osProvRfc2544HistEntry 48 }
-- ************************************************************
-- The osProvRfc2544RsltAccumTable - last complete result
-- ************************************************************
osProvRfc2544RsltAccumTable OBJECT-TYPE
SYNTAX SEQUENCE OF OsProvRfc2544RsltAccumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contain the last completed session accumulated bursts results."
::= { osProvRfc2544 13 }
osProvRfc2544RsltAccumEntry OBJECT-TYPE
SYNTAX OsProvRfc2544RsltAccumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains an entry of the osProvRfc2544RsltAccumTable table."
AUGMENTS { osProvRfc2544CfgEntry }
::= { osProvRfc2544RsltAccumTable 1 }
OsProvRfc2544RsltAccumEntry ::= SEQUENCE {
osProvRfc2544RsltAccumStarted DateAndTime,
osProvRfc2544RsltAccumBurstsNumber Unsigned32,
osProvRfc2544RsltAccumTotalDuration Unsigned32,
osProvRfc2544RsltAccumTestType TestType,
osProvRfc2544RsltAccumRespType RespType,
osProvRfc2544RsltAccumTestRunState TestRunState,
osProvRfc2544RsltAccumProtocol TestProtocol,
osProvRfc2544RsltAccumDstMac MacAddress,
osProvRfc2544RsltAccumSrcMac MacAddress,
osProvRfc2544RsltAccumIpDstType InetAddressType,
osProvRfc2544RsltAccumIpDstAddr InetAddress,
osProvRfc2544RsltAccumTxPort PortIndexOrNone,
osProvRfc2544RsltAccumTransmitted Unsigned32,
osProvRfc2544RsltAccumReceived Unsigned32,
osProvRfc2544RsltAccumRttMin Unsigned32,
osProvRfc2544RsltAccumRttMax Unsigned32,
osProvRfc2544RsltAccumRttAverage Unsigned32,
osProvRfc2544RsltAccumRttSum2 Unsigned32,
osProvRfc2544RsltAccumJittMin Unsigned32,
osProvRfc2544RsltAccumJittMax Unsigned32,
osProvRfc2544RsltAccumJittAverage Unsigned32,
osProvRfc2544RsltAccumJittSum2 Unsigned32,
osProvRfc2544RsltAccumDsJittMin Unsigned32,
osProvRfc2544RsltAccumDsJittMax Unsigned32,
osProvRfc2544RsltAccumDsJittAverage Unsigned32,
osProvRfc2544RsltAccumDsJittSum2 Unsigned32,
osProvRfc2544RsltAccumPcktLoss Unsigned32,
osProvRfc2544RsltAccumProbeInterval Unsigned32,
osProvRfc2544RsltAccumRate Unsigned32,
osProvRfc2544RsltAccumPacketLength Unsigned32
}
osProvRfc2544RsltAccumStarted OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp, when this test has been started."
::= { osProvRfc2544RsltAccumEntry 4 }
osProvRfc2544RsltAccumBurstsNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Corresponding osRfc2544HistoryIndex."
::= { osProvRfc2544RsltAccumEntry 5 }
osProvRfc2544RsltAccumTotalDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Corresponding osRfc2544HistoryIndex."
::= { osProvRfc2544RsltAccumEntry 6 }
osProvRfc2544RsltAccumTestType OBJECT-TYPE
SYNTAX TestType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544RsltAccumEntry 7 }
osProvRfc2544RsltAccumRespType OBJECT-TYPE
SYNTAX RespType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544RsltAccumEntry 8 }
osProvRfc2544RsltAccumTestRunState OBJECT-TYPE
SYNTAX TestRunState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544RsltAccumEntry 9 }
osProvRfc2544RsltAccumProtocol OBJECT-TYPE
SYNTAX TestProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol of a test."
::= { osProvRfc2544RsltAccumEntry 10 }
osProvRfc2544RsltAccumDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop."
::= { osProvRfc2544RsltAccumEntry 11 }
osProvRfc2544RsltAccumSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface."
::= { osProvRfc2544RsltAccumEntry 12 }
osProvRfc2544RsltAccumIpDstType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType."
::= { osProvRfc2544RsltAccumEntry 13 }
osProvRfc2544RsltAccumIpDstAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr."
::= { osProvRfc2544RsltAccumEntry 14 }
osProvRfc2544RsltAccumTxPort OBJECT-TYPE
SYNTAX PortIndexOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544RsltAccumEntry 16 }
osProvRfc2544RsltAccumTransmitted OBJECT-TYPE
SYNTAX Unsigned32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of request packets transmitted the burst."
::= { osProvRfc2544RsltAccumEntry 21 }
osProvRfc2544RsltAccumReceived OBJECT-TYPE
SYNTAX Unsigned32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of reply packets received in the burst."
::= { osProvRfc2544RsltAccumEntry 22 }
osProvRfc2544RsltAccumRttMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round-trip-time (RTT) received."
::= { osProvRfc2544RsltAccumEntry 23 }
osProvRfc2544RsltAccumRttMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round-trip-time (RTT) received."
::= { osProvRfc2544RsltAccumEntry 24 }
osProvRfc2544RsltAccumRttAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average round-trip-time (RTT) received."
::= { osProvRfc2544RsltAccumEntry 25 }
osProvRfc2544RsltAccumRttSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544RsltAccumEntry 26 }
osProvRfc2544RsltAccumJittMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of all source-to-destination jitter values."
::= { osProvRfc2544RsltAccumEntry 30 }
osProvRfc2544RsltAccumJittMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mahimum value of all source-to-destination jitter values."
::= { osProvRfc2544RsltAccumEntry 32 }
osProvRfc2544RsltAccumJittAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of all source-to-destination jitter values."
::= { osProvRfc2544RsltAccumEntry 33 }
osProvRfc2544RsltAccumJittSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all source-to-destination
jitter values. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544RsltAccumEntry 34 }
osProvRfc2544RsltAccumDsJittMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of all destination-to-source jitter values."
::= { osProvRfc2544RsltAccumEntry 35 }
osProvRfc2544RsltAccumDsJittMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mahimum value of all destination-to-source jitter values."
::= { osProvRfc2544RsltAccumEntry 36 }
osProvRfc2544RsltAccumDsJittAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of all destination-to-source jitter values."
::= { osProvRfc2544RsltAccumEntry 37 }
osProvRfc2544RsltAccumDsJittSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all destination-to-source
jitter values. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544RsltAccumEntry 38 }
osProvRfc2544RsltAccumPcktLoss OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.01%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calculation of packet loss value."
::= { osProvRfc2544RsltAccumEntry 40 }
osProvRfc2544RsltAccumProbeInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between packets.
Objects osProvRfc2544RsltAccumProbeInterval and osProvRfc2544RsltAccumRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as equal to 0, then agent returns osProvRfc2544ProbeInterval
equal to osProvRfc2544RsltAccumProbeInterval.
If osProvRfc2544Rate has been configured as not equal to 0, then agent calculates interval
between packets, corresponding to osProvRfc2544Rate and returns it
as osProvRfc2544RsltAccumProbeInterval."
::= { osProvRfc2544RsltAccumEntry 46 }
osProvRfc2544RsltAccumRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbits/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of transmition frames in bursts.
Objects osProvRfc2544RsltAccumProbeInterval and osProvRfc2544RsltAccumRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as not equal to 0, then
agent returns osProvRfc2544RsltAccumRate equal to osProvRfc2544Rate.
If osProvRfc2544Rate has been configured as equal to 0, then agent calculates
rate, corresponding to osProvRfc2544ProbeInterval and returns it as osProvRfc2544RsltAccumRate."
::= { osProvRfc2544RsltAccumEntry 47 }
osProvRfc2544RsltAccumPacketLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is equal to corresponding osProvRfc2544PacketLength."
::= { osProvRfc2544RsltAccumEntry 48 }
-- ************************************************************
-- The osProvRfc2544HistAccumTable - history table
-- ************************************************************
osProvRfc2544HistAccumTable OBJECT-TYPE
SYNTAX SEQUENCE OF OsProvRfc2544HistAccumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contain at most last osProvRfc2544MaxRows samples, each of them reflects results of
comleted burst."
::= { osProvRfc2544 14 }
osProvRfc2544HistAccumEntry OBJECT-TYPE
SYNTAX OsProvRfc2544HistAccumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains an entry of the osProvRfc2544HistAccumTable table."
INDEX { osEthServId, osProvRfc2544CfgFlowId, osProvRfc2544HistAccumIndex }
::= { osProvRfc2544HistAccumTable 1 }
OsProvRfc2544HistAccumEntry ::= SEQUENCE {
osProvRfc2544HistAccumIndex Unsigned32,
osProvRfc2544HistAccumStarted DateAndTime,
osProvRfc2544HistAccumBurstsNumber Unsigned32,
osProvRfc2544HistAccumTotalDuration Unsigned32,
osProvRfc2544HistAccumTestType TestType,
osProvRfc2544HistAccumRespType RespType,
osProvRfc2544HistAccumProtocol TestProtocol,
osProvRfc2544HistAccumDstMac MacAddress,
osProvRfc2544HistAccumSrcMac MacAddress,
osProvRfc2544HistAccumIpDstType InetAddressType,
osProvRfc2544HistAccumIpDstAddr InetAddress,
osProvRfc2544HistAccumTxPort PortIndexOrNone,
osProvRfc2544HistAccumTransmitted Unsigned32,
osProvRfc2544HistAccumReceived Unsigned32,
osProvRfc2544HistAccumRttMin Unsigned32,
osProvRfc2544HistAccumRttMax Unsigned32,
osProvRfc2544HistAccumRttAverage Unsigned32,
osProvRfc2544HistAccumRttSum2 Unsigned32,
osProvRfc2544HistAccumJittMin Unsigned32,
osProvRfc2544HistAccumJittMax Unsigned32,
osProvRfc2544HistAccumJittAverage Unsigned32,
osProvRfc2544HistAccumJittSum2 Unsigned32,
osProvRfc2544HistAccumDsJittMin Unsigned32,
osProvRfc2544HistAccumDsJittMax Unsigned32,
osProvRfc2544HistAccumDsJittAverage Unsigned32,
osProvRfc2544HistAccumDsJittSum2 Unsigned32,
osProvRfc2544HistAccumPcktLoss Unsigned32,
osProvRfc2544HistAccumProbeInterval Unsigned32,
osProvRfc2544HistAccumRate Unsigned32,
osProvRfc2544HistAccumPacketLength Unsigned32
}
osProvRfc2544HistAccumIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same osProvRfc2544CfgEntry.
This index starts at 1 and increases by one
as each new sample is taken."
REFERENCE
"."
::= { osProvRfc2544HistAccumEntry 3 }
osProvRfc2544HistAccumStarted OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp, when this test has been started."
::= { osProvRfc2544HistAccumEntry 4 }
osProvRfc2544HistAccumBurstsNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Corresponding osRfc2544HistoryIndex."
::= { osProvRfc2544HistAccumEntry 5 }
osProvRfc2544HistAccumTotalDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Corresponding osRfc2544HistoryIndex."
::= { osProvRfc2544HistAccumEntry 6 }
osProvRfc2544HistAccumTestType OBJECT-TYPE
SYNTAX TestType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544HistAccumEntry 7 }
osProvRfc2544HistAccumRespType OBJECT-TYPE
SYNTAX RespType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544HistAccumEntry 8 }
osProvRfc2544HistAccumProtocol OBJECT-TYPE
SYNTAX TestProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol of a test."
::= { osProvRfc2544HistAccumEntry 9 }
osProvRfc2544HistAccumDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop."
::= { osProvRfc2544HistAccumEntry 10 }
osProvRfc2544HistAccumSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface."
::= { osProvRfc2544HistAccumEntry 11 }
osProvRfc2544HistAccumIpDstType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType."
::= { osProvRfc2544HistAccumEntry 12 }
osProvRfc2544HistAccumIpDstAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr."
::= { osProvRfc2544HistAccumEntry 13 }
osProvRfc2544HistAccumTxPort OBJECT-TYPE
SYNTAX PortIndexOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544HistAccumEntry 16 }
osProvRfc2544HistAccumTransmitted OBJECT-TYPE
SYNTAX Unsigned32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of request packets transmitted the burst."
::= { osProvRfc2544HistAccumEntry 21 }
osProvRfc2544HistAccumReceived OBJECT-TYPE
SYNTAX Unsigned32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of reply packets received in the burst."
::= { osProvRfc2544HistAccumEntry 22 }
osProvRfc2544HistAccumRttMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round-trip-time (RTT) received."
::= { osProvRfc2544HistAccumEntry 23 }
osProvRfc2544HistAccumRttMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round-trip-time (RTT) received."
::= { osProvRfc2544HistAccumEntry 24 }
osProvRfc2544HistAccumRttAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average round-trip-time (RTT) received."
::= { osProvRfc2544HistAccumEntry 25 }
osProvRfc2544HistAccumRttSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544HistAccumEntry 26 }
osProvRfc2544HistAccumJittMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of all source-to-destination jitter values."
::= { osProvRfc2544HistAccumEntry 30 }
osProvRfc2544HistAccumJittMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mahimum value of all source-to-destination jitter values."
::= { osProvRfc2544HistAccumEntry 32 }
osProvRfc2544HistAccumJittAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of all source-to-destination jitter values."
::= { osProvRfc2544HistAccumEntry 33 }
osProvRfc2544HistAccumJittSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all source-to-destination
jitter values. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544HistAccumEntry 34 }
osProvRfc2544HistAccumDsJittMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of all destination-to-source jitter values."
::= { osProvRfc2544HistAccumEntry 35 }
osProvRfc2544HistAccumDsJittMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mahimum value of all destination-to-source jitter values."
::= { osProvRfc2544HistAccumEntry 36 }
osProvRfc2544HistAccumDsJittAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of all destination-to-source jitter values."
::= { osProvRfc2544HistAccumEntry 37 }
osProvRfc2544HistAccumDsJittSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all destination-to-source
jitter values. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544HistAccumEntry 38 }
osProvRfc2544HistAccumPcktLoss OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.01%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calculation of packet loss value."
::= { osProvRfc2544HistAccumEntry 40 }
--3456789a123456789b123456789c12 6789d123456789e123456789f123456789g123456789
osProvRfc2544HistAccumProbeInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between packets.
Objects osProvRfc2544HistAccumProbeInterval and osProvRfc2544HistAccumRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as equal to 0, then agent returns osProvRfc2544ProbeInterval
equal to osProvRfc2544HistAccumProbeInterval.
If osProvRfc2544Rate has been configured as not equal to 0, then agent calculates interval
between packets, corresponding to osProvRfc2544Rate and returns it
as osProvRfc2544HistAccumProbeInterval."
::= { osProvRfc2544HistAccumEntry 46 }
osProvRfc2544HistAccumRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbits/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of transmition frames in bursts.
Objects osProvRfc2544HistAccumProbeInterval and osProvRfc2544HistAccumRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as not equal to 0, then
agent returns osProvRfc2544HistAccumRate equal to osProvRfc2544Rate.
If osProvRfc2544Rate has been configured as equal to 0, then agent calculates
rate, corresponding to osProvRfc2544ProbeInterval and returns it as osProvRfc2544HistAccumRate."
::= { osProvRfc2544HistAccumEntry 47 }
osProvRfc2544HistAccumPacketLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is equal to corresponding osProvRfc2544PacketLength."
::= { osProvRfc2544HistAccumEntry 48 }
-- ************************************************************
-- Notification Definition section
-- ************************************************************
-- Notification are defined inosRfc2544.mib
-- ******************************************************************
-- The osProvRfc2544LengthTable Table - results of throughput and latency
-- ******************************************************************
osProvRfc2544LengthTable OBJECT-TYPE
SYNTAX SEQUENCE OF OsProvRfc2544LengthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rfc2544 service configuration table."
::= { osProvRfc2544 12 }
osProvRfc2544LengthEntry OBJECT-TYPE
SYNTAX OsProvRfc2544LengthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains an entry of the table."
INDEX { osEthServId, osProvRfc2544CfgFlowId, osProvRfc2544LengthValue }
::= { osProvRfc2544LengthTable 1 }
OsProvRfc2544LengthEntry ::= SEQUENCE {
osProvRfc2544LengthValue Unsigned32,
osProvRfc2544LengthStarted DateAndTime,
osProvRfc2544LengthTestType TestType,
osProvRfc2544LengthTestRunState TestRunState,
osProvRfc2544LengthProtocol TestProtocol,
osProvRfc2544LengthDstMac MacAddress,
osProvRfc2544LengthSrcMac MacAddress,
osProvRfc2544LengthIpDstType InetAddressType,
osProvRfc2544LengthIpDstAddr InetAddress,
osProvRfc2544LengthTxPort PortIndexOrNone,
osProvRfc2544LengthTransmitted Unsigned32,
osProvRfc2544LengthReceived Unsigned32,
osProvRfc2544LengthRttMin Unsigned32,
osProvRfc2544LengthRttMax Unsigned32,
osProvRfc2544LengthRttAverage Unsigned32,
osProvRfc2544LengthRttSum2 Unsigned32,
osProvRfc2544LengthJittMin Unsigned32,
osProvRfc2544LengthJittMax Unsigned32,
osProvRfc2544LengthJittAverage Unsigned32,
osProvRfc2544LengthJittSum2 Unsigned32,
osProvRfc2544LengthDsJittMin Unsigned32,
osProvRfc2544LengthDsJittMax Unsigned32,
osProvRfc2544LengthDsJittAverage Unsigned32,
osProvRfc2544LengthDsJittSum2 Unsigned32,
osProvRfc2544LengthPcktLoss Unsigned32,
osProvRfc2544LengthProbeInterval Unsigned32,
osProvRfc2544LengthRate Unsigned32
}
osProvRfc2544LengthValue OBJECT-TYPE
SYNTAX Unsigned32
UNITS "octets"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544LengthEntry 3 }
osProvRfc2544LengthStarted OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp, when this test has been started."
::= { osProvRfc2544LengthEntry 4 }
osProvRfc2544LengthTestType OBJECT-TYPE
SYNTAX TestType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544LengthEntry 5 }
osProvRfc2544LengthTestRunState OBJECT-TYPE
SYNTAX TestRunState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544LengthEntry 7 }
osProvRfc2544LengthProtocol OBJECT-TYPE
SYNTAX TestProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol of a test."
::= { osProvRfc2544LengthEntry 8 }
osProvRfc2544LengthDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop."
::= { osProvRfc2544LengthEntry 10 }
osProvRfc2544LengthSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface."
::= { osProvRfc2544LengthEntry 11 }
osProvRfc2544LengthIpDstType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType."
::= { osProvRfc2544LengthEntry 12 }
osProvRfc2544LengthIpDstAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr."
::= { osProvRfc2544LengthEntry 13 }
osProvRfc2544LengthTxPort OBJECT-TYPE
SYNTAX PortIndexOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544LengthEntry 16 }
osProvRfc2544LengthTransmitted OBJECT-TYPE
SYNTAX Unsigned32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of request packets transmitted the burst."
::= { osProvRfc2544LengthEntry 21 }
osProvRfc2544LengthReceived OBJECT-TYPE
SYNTAX Unsigned32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of reply packets received in the burst."
::= { osProvRfc2544LengthEntry 22 }
osProvRfc2544LengthRttMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum round-trip-time (RTT) received."
::= { osProvRfc2544LengthEntry 23 }
osProvRfc2544LengthRttMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum round-trip-time (RTT) received."
::= { osProvRfc2544LengthEntry 24 }
osProvRfc2544LengthRttAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average round-trip-time (RTT) received."
::= { osProvRfc2544LengthEntry 25 }
osProvRfc2544LengthRttSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544LengthEntry 26 }
osProvRfc2544LengthJittMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of all source-to-destinameion jitter values."
::= { osProvRfc2544LengthEntry 30 }
osProvRfc2544LengthJittMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mahimum value of all source-to-destinameion jitter values."
::= { osProvRfc2544LengthEntry 32 }
osProvRfc2544LengthJittAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of all source-to-destinameion jitter values."
::= { osProvRfc2544LengthEntry 33 }
osProvRfc2544LengthJittSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all source-to-destinameion
jitter values. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544LengthEntry 34 }
osProvRfc2544LengthDsJittMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of all destinameion-to-source jitter values."
::= { osProvRfc2544LengthEntry 35 }
osProvRfc2544LengthDsJittMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mahimum value of all destinameion-to-source jitter values."
::= { osProvRfc2544LengthEntry 36 }
osProvRfc2544LengthDsJittAverage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of all destinameion-to-source jitter values."
::= { osProvRfc2544LengthEntry 37 }
osProvRfc2544LengthDsJittSum2 OBJECT-TYPE
SYNTAX Unsigned32
UNITS "square of microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all destinameion-to-source
jitter values. Its purpose is to enable standard
deviation calculation."
::= { osProvRfc2544LengthEntry 38 }
osProvRfc2544LengthPcktLoss OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.01%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calculation of packet loss value."
::= { osProvRfc2544LengthEntry 40 }
osProvRfc2544LengthProbeInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between packets.
Objects osProvRfc2544LengthProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as equal to 0, then agent returns osProvRfc2544ProbeInterval
equal to osProvRfc2544RsltProbeInterval.
If osProvRfc2544Rate has been configured as not equal to 0, then agent calculates interval
between packets, corresponding to osProvRfc2544Rate and returns it
as osProvRfc2544RsltProbeInterval."
::= { osProvRfc2544LengthEntry 46 }
osProvRfc2544LengthRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbits/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of transmition frames in bursts.
Objects osProvRfc2544RsltProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate has been configured as not equal to 0, then
agent returns osProvRfc2544RsltRate equal to osProvRfc2544Rate.
If osProvRfc2544Rate has been configured as equal to 0, then agent calculates
rate, corresponding to osProvRfc2544ProbeInterval and returns it as osProvRfc2544RsltRate."
::= { osProvRfc2544LengthEntry 47 }
-- *******************************************************************
-- Conformance Information
-- *******************************************************************
osProvRfc2544MIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The core compliance statement for all the implementations."
MODULE -- this module
MANDATORY-GROUPS { osProvRfc2544MandatoryGroup }
::= { osProvRfc2544MIBCompliances 1 }
-- ...................................................................
-- Conformance Groups
-- ...................................................................
osProvRfc2544MandatoryGroup OBJECT-GROUP
OBJECTS {
osProvRfc2544ProtocolSupported, osProvRfc2544TestTypesSupported, osRfc2544IpAddrTypesSupported,
osProvRfc2544MinRate, osProvRfc2544MaxRate, osProvRfc2544MaxNumOfLengths,
osProvRfc2544TholdReason,
osProvRfc2544PrflTestType,
osProvRfc2544PrflProtocol,
osProvRfc2544PrflBurstNumber, osProvRfc2544PrflBurstInterval,
osProvRfc2544PrflDuration, osProvRfc2544PrflProbeNumber, osProvRfc2544PrflProbeInterval,
osProvRfc2544PrflRate, osProvRfc2544PrflProbeTimeout,
osProvRfc2544PrflAllwdPcktLoss, osProvRfc2544PrflMinStep,
osProvRfc2544PrflPacketLength, osProvRfc2544PrflDataFill,
osProvRfc2544PrflTtl,
osProvRfc2544PrflMaxRows, osProvRfc2544PrflTrapsGeneration,
osProvRfc2544PrflFdRise, osProvRfc2544PrflFdFall,
osProvRfc2544PrflJittRise, osProvRfc2544PrflJittFall,
osProvRfc2544PrflPcktLossRise, osProvRfc2544PrflPcktLossFall,
osProvRfc2544PrflLastError,
osProvRfc2544PrflAdminStatus, osProvRfc2544PrflOperStatus,
osProvRfc2544LngthsSetAdmStatus,
osProvRfc2544CfgPrfl,
osProvRfc2544CfgDstMac, osProvRfc2544CfgSrcMac, osProvRfc2544CfgSrcMacRange,
osProvRfc2544CfgDstIpType, osProvRfc2544CfgDstIpAddr,
osProvRfc2544CfgTxPort, osProvRfc2544CfgTos,
osProvRfc2544CfgEnabled, osProvRfc2544CfgClear,
osProvRfc2544RsltStarted,
osProvRfc2544RsltTestType, osProvRfc2544RsltRespType, osProvRfc2544RsltTestRunState, osProvRfc2544RsltProtocol,
osProvRfc2544RsltDstMac, osProvRfc2544RsltSrcMac,
osProvRfc2544RsltIpDstType, osProvRfc2544RsltIpDstAddr,
osProvRfc2544RsltTxPort,
osProvRfc2544RsltTransmitted, osProvRfc2544RsltReceived,
osProvRfc2544RsltRttMin, osProvRfc2544RsltRttMax, osProvRfc2544RsltRttAverage, osProvRfc2544RsltRttSum2,
osProvRfc2544RsltJittMin, osProvRfc2544RsltJittMax, osProvRfc2544RsltJittAverage, osProvRfc2544RsltJittSum2,
osProvRfc2544RsltDsJittMin, osProvRfc2544RsltDsJittMax, osProvRfc2544RsltDsJittAverage, osProvRfc2544RsltDsJittSum2,
osProvRfc2544RsltProbeInterval, osProvRfc2544RsltRate, osProvRfc2544RsltPacketLength,
osProvRfc2544RsltPcktLoss,
osProvRfc2544HistStarted, osProvRfc2544HistTestType, osProvRfc2544HistRespType, osProvRfc2544HistProtocol,
osProvRfc2544HistDstMac, osProvRfc2544HistSrcMac,
osProvRfc2544HistIpDstType, osProvRfc2544HistIpDstAddr,
osProvRfc2544HistTxPort, osProvRfc2544HistTransmitted,
osProvRfc2544HistReceived, osProvRfc2544HistRttMin,
osProvRfc2544HistRttMax, osProvRfc2544HistRttAverage, osProvRfc2544HistRttSum2,
osProvRfc2544HistJittMin, osProvRfc2544HistJittMax, osProvRfc2544HistJittAverage, osProvRfc2544HistJittSum2,
osProvRfc2544HistDsJittMin, osProvRfc2544HistDsJittMax, osProvRfc2544HistDsJittAverage, osProvRfc2544HistDsJittSum2,
osProvRfc2544HistPcktLoss, osProvRfc2544HistProbeInterval,
osProvRfc2544HistRate, osProvRfc2544HistPacketLength,
osProvRfc2544LengthStarted, osProvRfc2544LengthTestType, osProvRfc2544LengthTestRunState, osProvRfc2544LengthProtocol,
osProvRfc2544LengthDstMac, osProvRfc2544LengthSrcMac,
osProvRfc2544LengthIpDstType, osProvRfc2544LengthIpDstAddr,
osProvRfc2544LengthTxPort,
osProvRfc2544LengthTransmitted, osProvRfc2544LengthReceived, osProvRfc2544LengthRttMin,
osProvRfc2544LengthRttMax, osProvRfc2544LengthRttAverage, osProvRfc2544LengthRttSum2,
osProvRfc2544LengthJittMin, osProvRfc2544LengthJittMax, osProvRfc2544LengthJittAverage, osProvRfc2544LengthJittSum2,
osProvRfc2544LengthDsJittMin, osProvRfc2544LengthDsJittMax, osProvRfc2544LengthDsJittAverage, osProvRfc2544LengthDsJittSum2,
osProvRfc2544LengthPcktLoss,
osProvRfc2544LengthProbeInterval, osProvRfc2544LengthRate,
osProvRfc2544RsltAccumStarted, osProvRfc2544RsltAccumBurstsNumber, osProvRfc2544RsltAccumTotalDuration,
osProvRfc2544RsltAccumTestType, osProvRfc2544RsltAccumRespType, osProvRfc2544RsltAccumTestRunState, osProvRfc2544RsltAccumProtocol,
osProvRfc2544RsltAccumDstMac, osProvRfc2544RsltAccumSrcMac,
osProvRfc2544RsltAccumIpDstType, osProvRfc2544RsltAccumIpDstAddr,
osProvRfc2544RsltAccumTxPort,
osProvRfc2544RsltAccumTransmitted, osProvRfc2544RsltAccumReceived,
osProvRfc2544RsltAccumRttMin, osProvRfc2544RsltAccumRttMax, osProvRfc2544RsltAccumRttAverage, osProvRfc2544RsltAccumRttSum2,
osProvRfc2544RsltAccumJittMin, osProvRfc2544RsltAccumJittMax, osProvRfc2544RsltAccumJittAverage, osProvRfc2544RsltAccumJittSum2,
osProvRfc2544RsltAccumDsJittMin, osProvRfc2544RsltAccumDsJittMax, osProvRfc2544RsltAccumDsJittAverage, osProvRfc2544RsltAccumDsJittSum2,
osProvRfc2544RsltAccumProbeInterval, osProvRfc2544RsltAccumRate, osProvRfc2544RsltAccumPacketLength,
osProvRfc2544RsltAccumPcktLoss,
osProvRfc2544HistAccumStarted, osProvRfc2544HistAccumBurstsNumber, osProvRfc2544HistAccumTotalDuration,
osProvRfc2544HistAccumTestType, osProvRfc2544HistAccumRespType, osProvRfc2544HistAccumProtocol,
osProvRfc2544HistAccumDstMac, osProvRfc2544HistAccumSrcMac,
osProvRfc2544HistAccumIpDstType, osProvRfc2544HistAccumIpDstAddr,
osProvRfc2544HistAccumTxPort, osProvRfc2544HistAccumTransmitted,
osProvRfc2544HistAccumReceived, osProvRfc2544HistAccumRttMin,
osProvRfc2544HistAccumRttMax, osProvRfc2544HistAccumRttAverage, osProvRfc2544HistAccumRttSum2,
osProvRfc2544HistAccumJittMin, osProvRfc2544HistAccumJittMax, osProvRfc2544HistAccumJittAverage, osProvRfc2544HistAccumJittSum2,
osProvRfc2544HistAccumDsJittMin, osProvRfc2544HistAccumDsJittMax, osProvRfc2544HistAccumDsJittAverage, osProvRfc2544HistAccumDsJittSum2,
osProvRfc2544HistAccumPcktLoss, osProvRfc2544HistAccumProbeInterval,
osProvRfc2544HistAccumRate, osProvRfc2544HistAccumPacketLength
}
STATUS current
DESCRIPTION
"."
::= { osProvRfc2544MIBGroups 1 }
END
View Git Blame Copy Permalink