495 lines
16 KiB
Plaintext
495 lines
16 KiB
Plaintext
-- ==================================================================
|
|
-- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
|
|
--
|
|
-- Description: MPLSOAM MIB
|
|
-- Reference:
|
|
-- Version: V1.0
|
|
-- History:
|
|
-- V1.0 2007-03-31 Created by Lixufu ID: 05023
|
|
-- ==================================================================
|
|
HPN-ICF-MPLSOAM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
hpnicfCommon
|
|
FROM HPN-ICF-OID-MIB
|
|
IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TruthValue, RowStatus, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC;
|
|
|
|
hpnicfMplsOam MODULE-IDENTITY
|
|
LAST-UPDATED "200703310000Z" -- March 31, 2007 at 00:00 GMT
|
|
ORGANIZATION
|
|
""
|
|
CONTACT-INFO
|
|
""
|
|
DESCRIPTION
|
|
"This MIB contains objects to configure OAM module.
|
|
The Operation, Administration and Maintenance (OAM)
|
|
is an effective means for decreasing the cost of network maintenance.
|
|
The MPLS OAM is used to administrate and maintain MPLS."
|
|
::= { hpnicfCommon 79 }
|
|
|
|
HpnicfMplsOAMDefectType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the OAM's defect type:
|
|
1: dServer, server layer defect;
|
|
2: dPeerMe, peer network maintenance entity defect;
|
|
3: dLOCV, Loss of Connectivity Verification defect;
|
|
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
|
|
5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect;
|
|
6: dExcess, receiving excess rate of CV/FFD;
|
|
7: dUnknown, unknown defect in the MPLS network..
|
|
8: rlsn down;
|
|
9: dLspDown;
|
|
10: MPLS OAM ME;
|
|
11: no defect."
|
|
SYNTAX INTEGER
|
|
{
|
|
dServer(1),
|
|
dPeerMe(2),
|
|
dLOCV(3),
|
|
dTTSIMismatch(4),
|
|
dTTSIMismerge(5),
|
|
dExcess(6),
|
|
dUnknown(7),
|
|
dRlsnDown(8),
|
|
dLspDown(9),
|
|
dME(10),
|
|
noDefect(11)
|
|
}
|
|
|
|
HpnicfMplsOAMDetectFreq ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the OAM's frequent type( ITU-T: Y.1711(0402) ):
|
|
For CV: the frequency is static. The value is 1/s.
|
|
For FFD: the frequency is set by user. The value
|
|
can be 10ms, 20ms, 50ms, 100ms, 200ms, 500ms.
|
|
Any other frequency is wrong.
|
|
1: 10ms;
|
|
2: 20ms;
|
|
3: 50ms;
|
|
4: 100ms;
|
|
5: 200ms;
|
|
6: 500ms;
|
|
7: 1000ms(only for cv)."
|
|
SYNTAX INTEGER
|
|
{
|
|
ffd10ms(1),
|
|
ffd20ms(2),
|
|
ffd50ms(3),
|
|
ffd100ms(4),
|
|
ffd200ms(5),
|
|
ffd500ms(6),
|
|
cv1000ms(7)
|
|
}
|
|
|
|
-- ==================================================================
|
|
--
|
|
-- ======================= definition begin =========================
|
|
--
|
|
-- ==================================================================
|
|
hpnicfMplsOamScalarGroup OBJECT IDENTIFIER ::= { hpnicfMplsOam 1 }
|
|
|
|
hpnicfMplsOamCapability OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether OAM is globally capable.
|
|
false: incapable;
|
|
true: capable;
|
|
The default value is incapable."
|
|
DEFVAL { false }
|
|
::= { hpnicfMplsOamScalarGroup 1 }
|
|
|
|
hpnicfMplsOamTrapOpen OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether OAM trap is globally enabled.
|
|
false: disable;
|
|
true: enable;
|
|
The default value is disable."
|
|
DEFVAL { false }
|
|
::= { hpnicfMplsOamScalarGroup 2 }
|
|
|
|
hpnicfMplsOamTable OBJECT IDENTIFIER ::= { hpnicfMplsOam 2 }
|
|
|
|
hpnicfMplsOamIgrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfMplsOamIgrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-LSP MPLS OAM ingress capability and
|
|
associated information, such as IgrLspName and IgrDetType."
|
|
::= { hpnicfMplsOamTable 1 }
|
|
|
|
hpnicfMplsOamIgrEntry OBJECT-TYPE
|
|
SYNTAX HpnicfMplsOamIgrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for every LSP
|
|
capable of supporting MPLS OAM at ingress."
|
|
INDEX
|
|
{
|
|
hpnicfMplsOamIgrIndex
|
|
}
|
|
::= { hpnicfMplsOamIgrTable 1 }
|
|
|
|
HpnicfMplsOamIgrEntry ::= SEQUENCE
|
|
{
|
|
hpnicfMplsOamIgrIndex Unsigned32,
|
|
hpnicfMplsOamIgrLspName OCTET STRING,
|
|
hpnicfMplsOamIgrDetectType INTEGER,
|
|
hpnicfMplsOamIgrDetectFreq HpnicfMplsOAMDetectFreq,
|
|
hpnicfMplsOamIgrRevType INTEGER,
|
|
hpnicfMplsOamIgrRevLspName OCTET STRING,
|
|
hpnicfMplsOamIgrLspId Integer32,
|
|
hpnicfMplsOamIgrEnable TruthValue,
|
|
hpnicfMplsOamIgrDefectType HpnicfMplsOAMDefectType,
|
|
hpnicfMplsOamIgrRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfMplsOamIgrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an unique index for an OAM ingress entry in the OAM table."
|
|
::= { hpnicfMplsOamIgrEntry 1 }
|
|
|
|
hpnicfMplsOamIgrLspName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of an LSP.
|
|
It means the LSP name of the detected LSP."
|
|
::= { hpnicfMplsOamIgrEntry 2 }
|
|
|
|
hpnicfMplsOamIgrDetectType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
cv(1),
|
|
ffd(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There are two types of OAM packets, CV and FFD.
|
|
The CV flow is generated at the source LSR of the LSP with
|
|
a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
|
|
FFD provides failure detection option for an LSP independent
|
|
of the CV based availability model and is not tied to the
|
|
CV insertion rate. Insertion rates at 1/s or faster may
|
|
also be used.
|
|
The CV/FFD packet contains a network-unique identifier (TTSI)
|
|
so that all types of defects can be detected.
|
|
1: CV;
|
|
2: FFD."
|
|
::= { hpnicfMplsOamIgrEntry 3 }
|
|
|
|
hpnicfMplsOamIgrDetectFreq OBJECT-TYPE
|
|
SYNTAX HpnicfMplsOAMDetectFreq
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication of the OAM's frequent type."
|
|
::= { hpnicfMplsOamIgrEntry 4 }
|
|
|
|
hpnicfMplsOamIgrRevType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
private(1),
|
|
share(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When an LSP is found to be in defect, the sink LSR of the LSP
|
|
should send BDI to inform the source LSR of the LSP, the BDI is
|
|
transferred through the reverse LSP.
|
|
The type of reverse LSP can be private or shared.
|
|
If private, then the reverse LSP can be used only by the oam ingress;
|
|
If shared, the reverse LSP which is shared between many forward
|
|
LSPs, whose source LSRs are the same and sink LSRs are the same.
|
|
1: private;
|
|
2: share."
|
|
::= { hpnicfMplsOamIgrEntry 5 }
|
|
|
|
hpnicfMplsOamIgrRevLspName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the name of the reverse LSP."
|
|
::= { hpnicfMplsOamIgrEntry 6 }
|
|
|
|
hpnicfMplsOamIgrLspId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For ingress, the object indicates the lsp ID of
|
|
the detected LSP."
|
|
::= { hpnicfMplsOamIgrEntry 7 }
|
|
|
|
hpnicfMplsOamIgrEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether one LSP is OAM enable.
|
|
If disable, LSP is not monitored;
|
|
If enable, CV/FFD is generated at the source LSR of the LSP and
|
|
checked at the sink LSR of the LSP, and user can set
|
|
other configuration.
|
|
false: The OAM function is disabled on the ingress;
|
|
true: The OAM function is enabled on the ingress."
|
|
DEFVAL { false }
|
|
::= { hpnicfMplsOamIgrEntry 8 }
|
|
|
|
hpnicfMplsOamIgrDefectType OBJECT-TYPE
|
|
SYNTAX HpnicfMplsOAMDefectType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication of the OAM's defect type."
|
|
::= { hpnicfMplsOamIgrEntry 9 }
|
|
|
|
hpnicfMplsOamIgrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is responsible for managing the creation,
|
|
deletion and modification of rows, which support active
|
|
status and CreatAndGo, destroy operation.
|
|
To create a new row, hpnicfMplsOamIgrLspName, hpnicfMplsOamIgrDetectType,
|
|
hpnicfMplsOamIgrDetectFreq, hpnicfMplsOamIgrRevType, hpnicfMplsOamIgrRevLspName,
|
|
and hpnicfMplsOamIgrLspId must be specified."
|
|
::= { hpnicfMplsOamIgrEntry 10 }
|
|
|
|
hpnicfMplsOamEgrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfMplsOamEgrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-LSP MPLS OAM capability and
|
|
associated information, such as DetectType, DetectFrequency."
|
|
::= { hpnicfMplsOamTable 2 }
|
|
|
|
hpnicfMplsOamEgrEntry OBJECT-TYPE
|
|
SYNTAX HpnicfMplsOamEgrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for every LSP
|
|
capable of supporting MPLS OAM at egress."
|
|
INDEX
|
|
{
|
|
hpnicfMplsOamEgrIndex
|
|
}
|
|
::= { hpnicfMplsOamEgrTable 1 }
|
|
|
|
HpnicfMplsOamEgrEntry ::= SEQUENCE
|
|
{
|
|
hpnicfMplsOamEgrIndex Unsigned32,
|
|
hpnicfMplsOamEgrLspName OCTET STRING,
|
|
hpnicfMplsOamEgrDetectType INTEGER,
|
|
hpnicfMplsOamEgrDetectFreq HpnicfMplsOAMDetectFreq,
|
|
hpnicfMplsOamEgrRevType INTEGER,
|
|
hpnicfMplsOamEgrRevLspName OCTET STRING,
|
|
hpnicfMplsOamEgrLsrId IpAddress,
|
|
hpnicfMplsOamEgrLspId Integer32,
|
|
hpnicfMplsOamEgrEnable TruthValue,
|
|
hpnicfMplsOamEgrDefectType HpnicfMplsOAMDefectType,
|
|
hpnicfMplsOamEgrRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfMplsOamEgrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index for an OAM egress entry in the OAM table."
|
|
::= { hpnicfMplsOamEgrEntry 1 }
|
|
|
|
hpnicfMplsOamEgrLspName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the name of static LSP at egress."
|
|
::= { hpnicfMplsOamEgrEntry 2 }
|
|
|
|
hpnicfMplsOamEgrDetectType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
cv(1),
|
|
ffd(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There are two types of OAM packets, CV and FFD.
|
|
The CV flow is generated at the source LSR of the LSP with
|
|
a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
|
|
FFD provides failure detection option for an LSP independent
|
|
of the CV based availability model and is not tied to the
|
|
CV insertion rate. Insertion rates at 1/s or faster may
|
|
also be used.
|
|
The CV/FFD packet contains a network-unique identifier (TTSI)
|
|
so that all types of defects can be detected.
|
|
1: CV;
|
|
2: FFD."
|
|
::= { hpnicfMplsOamEgrEntry 3 }
|
|
|
|
hpnicfMplsOamEgrDetectFreq OBJECT-TYPE
|
|
SYNTAX HpnicfMplsOAMDetectFreq
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication of the OAM's frequent type."
|
|
::= { hpnicfMplsOamEgrEntry 4 }
|
|
|
|
hpnicfMplsOamEgrRevType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
private(1),
|
|
share(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When an LSP is found to be in defect, the sink LSR of the LSP
|
|
should send BDI to inform the source LSR of the LSP, the BDI is
|
|
transferred through the reverse LSP.
|
|
The type of reverse LSP can be private or shared.
|
|
If private, then the reverse LSP can be used only when the only
|
|
LSP in defect;
|
|
If shared, the reverse LSP, which is shared between many forward
|
|
LSPs that have the same source LSRs and sink LSRs.
|
|
1: private;
|
|
2: share."
|
|
::= { hpnicfMplsOamEgrEntry 5 }
|
|
|
|
hpnicfMplsOamEgrRevLspName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the name of a reverse static-lsp."
|
|
::= { hpnicfMplsOamEgrEntry 6 }
|
|
|
|
hpnicfMplsOamEgrLsrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the Ingress LSR ID of the LSP."
|
|
::= { hpnicfMplsOamEgrEntry 7 }
|
|
|
|
hpnicfMplsOamEgrLspId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the the Ingress session lsp ID of the
|
|
detected static-LSP."
|
|
::= { hpnicfMplsOamEgrEntry 8 }
|
|
|
|
hpnicfMplsOamEgrEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether one LSP is enabled with OAM.
|
|
If disable, LSP is not monitored;
|
|
If enable, CV/FFD is generated at the source LSR of the LSP and
|
|
checked at the sink LSR of the LSP, and user can set
|
|
other configuration.
|
|
false: The OAM function is disabled on the egress;
|
|
true: The OAM function is enabled on the egress."
|
|
DEFVAL { false }
|
|
::= { hpnicfMplsOamEgrEntry 9 }
|
|
|
|
hpnicfMplsOamEgrDefectType OBJECT-TYPE
|
|
SYNTAX HpnicfMplsOAMDefectType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication of the OAM's defect type."
|
|
::= { hpnicfMplsOamEgrEntry 10 }
|
|
|
|
hpnicfMplsOamEgrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is responsible for managing the creation,
|
|
deletion and modification of rows, which support active
|
|
status and CreatAndGo, destroy operation.
|
|
To create a new row, hpnicfMplsOamEgrLspName, hpnicfMplsOamEgrDetectType,
|
|
hpnicfMplsOamEgrDetectFreq, hpnicfMplsOamEgrRevType, hpnicfMplsOamEgrRevLspName,
|
|
hpnicfMplsOamEgrLsrId and hpnicfMplsOamEgrLspId must be specified."
|
|
::= { hpnicfMplsOamEgrEntry 11 }
|
|
|
|
hpnicfMplsOamNotifications OBJECT IDENTIFIER ::= { hpnicfMplsOam 3 }
|
|
|
|
hpnicfMplsOamIgrLSPOutDefect NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hpnicfMplsOamIgrLspName,
|
|
hpnicfMplsOamIgrDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
out of the defect state at the LSP ingress."
|
|
::= { hpnicfMplsOamNotifications 1 }
|
|
|
|
hpnicfMplsOamIgrLSPInDefect NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hpnicfMplsOamIgrLspName,
|
|
hpnicfMplsOamIgrDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
in the defect state at the LSP ingress."
|
|
::= { hpnicfMplsOamNotifications 2 }
|
|
|
|
hpnicfMplsOamEgrLSPOutDefect NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hpnicfMplsOamEgrLspName,
|
|
hpnicfMplsOamEgrDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
out of the defect state at the LSP egress."
|
|
::= { hpnicfMplsOamNotifications 3 }
|
|
|
|
hpnicfMplsOamEgrLSPInDefect NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hpnicfMplsOamEgrLspName,
|
|
hpnicfMplsOamEgrDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
in the defect state at the LSP egress."
|
|
::= { hpnicfMplsOamNotifications 4 }
|
|
|
|
END
|