WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/hp/CPQSCSI-MIB

6793 lines
246 KiB
Plaintext
Raw Blame History

-- ****************************************************************************
--
-- SCSI Devices
-- Management Information Base for SNMP Network Management
--
--
-- Copyright 1992,2017 Hewlett Packard Enterprise Development LP.
--
-- Hewlett Packard Enterprise Development LP shall not be liable for technical or
-- editorial errors or omissions contained herein. The information in
-- this document is provided "as is" without warranty of any kind and
-- is subject to change without notice. The warranties for HP products
-- are set forth in the express limited warranty statements
-- accompanying such products. Nothing herein should be construed as
-- constituting an additional warranty.
--
-- Confidential computer software. Valid license from HPE required for
-- possession, use or copying. Consistent with FAR 12.211 and 12.212,
-- Commercial Computer Software, Computer Software Documentation, and
-- Technical Data for Commercial Items are licensed to the U.S.
-- Government under vendor's standard commercial license.
--
-- Refer to the READMIB.RDM file for more information about the
-- organization of the information in the Compaq Enterprise.
--
-- The Compaq Enterprise number is 232.
-- The ASN.1 prefix to, and including the Compaq Enterprise is:
-- 1.3.6.1.4.1.232
--
-- ****************************************************************************
CPQSCSI-MIB DEFINITIONS ::= BEGIN
IMPORTS
compaq FROM CPQHOST-MIB
enterprises FROM RFC1155-SMI
Counter FROM RFC1155-SMI
Gauge FROM RFC1155-SMI
DisplayString FROM RFC1213-MIB
OBJECT-TYPE FROM RFC-1212
TRAP-TYPE FROM RFC-1215
sysName FROM RFC1213-MIB
cpqHoTrapFlags FROM CPQHOST-MIB;
-- compaq OBJECT IDENTIFIER ::= { enterprises 232 }
cpqScsi OBJECT IDENTIFIER ::= { compaq 5 }
cpqScsiMibRev OBJECT IDENTIFIER ::= { cpqScsi 1 }
cpqScsiComponent OBJECT IDENTIFIER ::= { cpqScsi 2 }
cpqScsiTrap OBJECT IDENTIFIER ::= { cpqScsi 3 }
cpqTapeComponent OBJECT IDENTIFIER ::= { cpqScsi 4 }
cpqSasComponent OBJECT IDENTIFIER ::= { cpqScsi 5 }
cpqScsiInterface OBJECT IDENTIFIER ::= { cpqScsiComponent 1 }
cpqScsiCntlr OBJECT IDENTIFIER ::= { cpqScsiComponent 2 }
cpqScsiLogDrv OBJECT IDENTIFIER ::= { cpqScsiComponent 3 }
cpqScsiPhyDrv OBJECT IDENTIFIER ::= { cpqScsiComponent 4 }
cpqScsiTarget OBJECT IDENTIFIER ::= { cpqScsiComponent 5 }
cpqScsiCd OBJECT IDENTIFIER ::= { cpqScsiComponent 6 }
cpqScsiOsNetWare OBJECT IDENTIFIER ::= { cpqScsiInterface 1 }
cpqScsiOsCommon OBJECT IDENTIFIER ::= { cpqScsiInterface 4 }
cpqTapePhyDrv OBJECT IDENTIFIER ::= { cpqTapeComponent 1 }
cpqTapeCounters OBJECT IDENTIFIER ::= { cpqTapeComponent 2 }
cpqTapeLibrary OBJECT IDENTIFIER ::= { cpqTapeComponent 3 }
cpqSasHba OBJECT IDENTIFIER ::= { cpqSasComponent 1 }
cpqSasPhyDrv OBJECT IDENTIFIER ::= { cpqSasComponent 2 }
cpqSasLogDrv OBJECT IDENTIFIER ::= { cpqSasComponent 3 }
cpqSasTapeDrv OBJECT IDENTIFIER ::= { cpqSasComponent 4 }
-- The following groups have been deprecated
cpqSbScsiBus OBJECT IDENTIFIER ::= { compaq 7 }
cpqSbScsiMibRev OBJECT IDENTIFIER ::= { cpqSbScsiBus 1 }
cpqSbDevice OBJECT IDENTIFIER ::= { cpqSbScsiBus 2 }
-- ****************************************************************************
-- SCSI MIB Revision
-- =================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiMibRev Group (1.3.6.1.4.1.232.5.1)
--
--
-- A Storage Agent conforming to this document will return a
-- cpqScsiMibRevMajor of one (1) and a cpqScsiMibRevMinor of
-- forty three (43).
--
--
-- Implementation of the MibRev group is mandatory for all agents
-- supporting the Compaq SCSI MIB.
--
-- ****************************************************************************
cpqScsiMibRevMajor OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Major Revision level.
A change in the major revision level represents a major change
in the architecture of the MIB. A change in the major revision
level may indicate a significant change in the information
supported and/or the meaning of the supported information,
correct interpretation of data may require a MIB document with
the same major revision level."
::= { cpqScsiMibRev 1 }
cpqScsiMibRevMinor OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Minor Revision level.
A change in the minor revision level may represent some minor
additional support; no changes to any pre-existing information
has occurred."
::= { cpqScsiMibRev 2 }
cpqScsiMibCondition OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The overall condition.
This object represents the overall status of the SCSI system
represented by this MIB."
::= { cpqScsiMibRev 3 }
-- ****************************************************************************
-- SCSI NetWare Driver Information
-- ===============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1)
-- cpqScsiOsNetWare Group (1.3.6.1.4.1.232.5.2.1.1)
--
-- Implementation of the osNetWare group is mandatory for all agents that
-- support the SCSI MIB in a osNetWare 3x host operating
-- environment.
--
-- ****************************************************************************
cpqScsiNw3xDriverName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Drive Device Driver Name.
This is the name of the NetWare v3.1x SCSI device driver. It
can be used for identification purposes."
::= { cpqScsiOsNetWare 1 }
cpqScsiNw3xDriverVers OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Drive Device Driver Version.
This is the version of the NetWare v3.1x SCSI device driver.
It can be used for identification purposes."
::= { cpqScsiOsNetWare 2 }
cpqScsiNw3xDriverPollType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
polled(2),
demand(3)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Drive Device Driver Poll Type.
The SNMP instrument agent collects information from the
device driver in two ways:
other(1)
The management agent does not recognize this poll type.
You may need to upgrade your software.
polled(2)
Indicates that the information is periodically requested and
stored by the server based agent and is available when
requested.
demand(3)
Indicates that the information is collected at the time of the
request."
::= { cpqScsiOsNetWare 3 }
cpqScsiNw3xDriverPollTime OBJECT-TYPE
SYNTAX INTEGER (1..300)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Drive Device Driver Poll Time.
If the nw3xDriverPollType is polled(2) this value shows
how frequently, in seconds, the instrument agent requests
information from the device driver.
To change the poll time, you need to unload and then reload the
instrument agent using the following commands:
UNLOAD CPQDSKSA
LOAD CPQDSKSA /U<time>
The parameter /U specifies the frequency of updates in seconds.
The variable <time> represents the number of seconds that the
NLM should wait before collecting new data. The minimum is one
second and the maximum value is 300 seconds (five minutes)."
::= { cpqScsiOsNetWare 4 }
-- ****************************************************************************
-- SCSI NetWare Controller Information
-- ===================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1)
-- cpqScsiOsNetWare Group (1.3.6.1.4.1.232.5.2.1.1)
-- cpqScsiNw3xCntlrInfoTable (1.3.6.1.4.1.232.5.2.1.1.5)
--
-- ****************************************************************************
cpqScsiNw3xCntlrInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqScsiNw3xCntlrInfoEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"SCSI Controller Information Table."
::= { cpqScsiOsNetWare 5 }
cpqScsiNw3xCntlrInfoEntry OBJECT-TYPE
SYNTAX CpqScsiNw3xCntlrInfoEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"SCSI Controller Information Table Entry."
INDEX { cpqScsiNw3xCntlrIndex, cpqScsiNw3xBusIndex }
::= { cpqScsiNw3xCntlrInfoTable 1 }
CpqScsiNw3xCntlrInfoEntry ::= SEQUENCE
{
cpqScsiNw3xCntlrIndex INTEGER,
cpqScsiNw3xBusIndex INTEGER,
cpqScsiNw3xXptDesc DisplayString,
cpqScsiNw3xXptVers DisplayString,
cpqScsiNw3xSimDesc DisplayString,
cpqScsiNw3xSimVers DisplayString,
cpqScsiNw3xHbaDesc DisplayString
}
cpqScsiNw3xCntlrIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Controller Index.
The controller index indicates to which SCSI adapter instance
this table entry belongs. The controller index is the physical
slot in the computer system where the adapter is located."
::= { cpqScsiNw3xCntlrInfoEntry 1 }
cpqScsiNw3xBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter this table entry belongs. The instances start
at one and increment for each SCSI bus on an adapter."
::= { cpqScsiNw3xCntlrInfoEntry 2 }
cpqScsiNw3xXptDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI XPT Description.
This is a description of the Transport Layer (XPT) module,
CPQSXPT.DSK. The Transport Layer manages requests from the
device driver and routes them to the appropriate SCSI Interface
Module (SIM). This architecture is based on the ANSI SCSI-2
Common Access Method (CAM) specification."
::= { cpqScsiNw3xCntlrInfoEntry 3 }
cpqScsiNw3xXptVers OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI XPT Version.
This is the version of the Transport Layer (XPT) module,
CPQSXPT.DSK. The Transport Layer manages requests from the
device driver and routes them to the appropriate SCSI Interface
Module (SIM). This architecture is based on the ANSI SCSI-2
Common Access Method (CAM) specification."
::= { cpqScsiNw3xCntlrInfoEntry 4 }
cpqScsiNw3xSimDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI SIM Description.
This is a description of the SCSI Interface Module (SIM).
Each type of controller model has a specific SIM designed for it.
The SIM accepts requests from the Transport Layer and delivers
them to the physical device. This architecture is based on the
ANSI SCSI-2 Common Access Method (CAM) specification."
::= { cpqScsiNw3xCntlrInfoEntry 5 }
cpqScsiNw3xSimVers OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI SIM Version.
This is the version of the SCSI Interface Module (SIM).
Each type of controller model has a specific SIM designed for it.
The SIM accepts requests from the Transport Layer and delivers
them to the physical device. This architecture is based on the
ANSI SCSI-2 Common Access Method (CAM) specification."
::= { cpqScsiNw3xCntlrInfoEntry 6 }
cpqScsiNw3xHbaDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI HBA Description.
This is a description of the SCSI Host Bus Adapter (HBA).
An HBA represents one instance of a SCSI bus in the SCSI
Interface Module (SIM). This architecture is based on the
ANSI SCSI-2 Common Access Method (CAM) specification."
::= { cpqScsiNw3xCntlrInfoEntry 7 }
-- ****************************************************************************
-- SCSI NetWare Logical Drive Statistics
-- =====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1)
-- cpqScsiOsNetWare Group (1.3.6.1.4.1.232.5.2.1.1)
-- cpqScsiLogDrvStatTable (1.3.6.1.4.1.232.5.2.1.1.6)
--
-- ****************************************************************************
cpqScsiLogDrvStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqScsiLogDrvStatEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"SCSI Logical Drive Statistics Table."
::= { cpqScsiOsNetWare 6 }
cpqScsiLogDrvStatEntry OBJECT-TYPE
SYNTAX CpqScsiLogDrvStatEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"SCSI Device Driver Statistics Table Entry."
INDEX { cpqScsiNw3xStatCntlrIndex, cpqScsiNw3xStatBusIndex,
cpqScsiNw3xStatLogDrvIndex }
::= { cpqScsiLogDrvStatTable 1 }
CpqScsiLogDrvStatEntry ::= SEQUENCE
{
cpqScsiNw3xStatCntlrIndex INTEGER,
cpqScsiNw3xStatBusIndex INTEGER,
cpqScsiNw3xStatLogDrvIndex INTEGER,
cpqScsiNw3xTotalReads Counter,
cpqScsiNw3xTotalWrites Counter,
cpqScsiNw3xCorrReads Counter,
cpqScsiNw3xCorrWrites Counter,
cpqScsiNw3xFatalReads Counter,
cpqScsiNw3xFatalWrites Counter
}
cpqScsiNw3xStatCntlrIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Controller Index.
The controller index indicates to which SCSI adapter instance
this table entry belongs. The controller index is the physical
slot in the computer system where the adapter is located."
::= { cpqScsiLogDrvStatEntry 1 }
cpqScsiNw3xStatBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..225)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter this table entry belongs. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqScsiLogDrvStatEntry 2 }
cpqScsiNw3xStatLogDrvIndex OBJECT-TYPE
SYNTAX INTEGER (0..225)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Logical Drive Index.
The logical drive index indicates to which logical drive
instance on a SCSI bus this table entry belongs. The logical
drive index starts at one and increments for each logical drive
on the SCSI bus."
::= { cpqScsiLogDrvStatEntry 3 }
cpqScsiNw3xTotalReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Logical Drive Total Reads.
This shows the total number of reads performed by the device
driver to this logical drive. This number is reset each time the
device driver is loaded for this logical drive."
::= { cpqScsiLogDrvStatEntry 4 }
cpqScsiNw3xTotalWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Logical Drive Total Writes.
This shows the total number of writes performed by the device
driver to this logical drive. This number is reset each time the
device driver is loaded for this logical drive."
::= { cpqScsiLogDrvStatEntry 5 }
cpqScsiNw3xCorrReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Logical Drive Corrected Reads.
This is the total number of read commands sent to the specified
logical drive which had to be corrected by fault tolerance.
This number is reset each time the device driver is loaded for
this logical drive."
::= { cpqScsiLogDrvStatEntry 6 }
cpqScsiNw3xCorrWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Logical Drive Corrected Writes.
This is the total number of write commands sent to the specified
logical drive which had to be corrected by fault tolerance.
This number is reset each time the device driver is loaded for
this logical drive."
::= { cpqScsiLogDrvStatEntry 7 }
cpqScsiNw3xFatalReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Logical Drive Fatal Reads.
This is the total number of read commands sent to the specified
logical drive which failed. This number is reset each time the
device driver is loaded for this logical drive."
::= { cpqScsiLogDrvStatEntry 8 }
cpqScsiNw3xFatalWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Logical Drive Fatal Writes.
This is the total number of write commands sent to the specified
logical drive which failed. This number is reset each time the
device driver is loaded for this logical drive."
::= { cpqScsiLogDrvStatEntry 9 }
-- ****************************************************************************
-- SCSI NetWare Volume Map Table
-- =============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1)
-- cpqScsiOsNetWare Group (1.3.6.1.4.1.232.5.2.1.1)
-- cpqScsiVolMapTable (1.3.6.1.4.1.232.5.2.1.1.7)
--
-- ****************************************************************************
cpqScsiVolMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqScsiVolMapEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"SCSI Drive Volume Map Table."
::= { cpqScsiOsNetWare 7 }
cpqScsiVolMapEntry OBJECT-TYPE
SYNTAX CpqScsiVolMapEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"SCSI Drive Volume Map Table Entry."
INDEX { cpqScsiNw3xVolCntlrIndex, cpqScsiNw3xVolBusIndex,
cpqScsiNw3xVolLogDrvIndex }
::= { cpqScsiVolMapTable 1 }
CpqScsiVolMapEntry ::= SEQUENCE
{
cpqScsiNw3xVolCntlrIndex INTEGER,
cpqScsiNw3xVolBusIndex INTEGER,
cpqScsiNw3xVolLogDrvIndex INTEGER,
cpqScsiNw3xVolMap OCTET STRING
}
cpqScsiNw3xVolCntlrIndex OBJECT-TYPE
SYNTAX INTEGER (0..225)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Cntlr Index.
The controller index indicates to which SCSI adapter instance
this table entry belongs. The controller index is the physical
slot in the computer system where the adapter is located."
::= { cpqScsiVolMapEntry 1 }
cpqScsiNw3xVolBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..225)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter this table entry belongs. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqScsiVolMapEntry 2 }
cpqScsiNw3xVolLogDrvIndex OBJECT-TYPE
SYNTAX INTEGER (0..225)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Logical Drive Index.
The logical drive index indicates to which logical drive
instance on a SCSI bus this table entry belongs. The logical
drive index starts at one and increments for each logical
drive on the SCSI bus."
::= { cpqScsiVolMapEntry 3 }
cpqScsiNw3xVolMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Drive Volume Map.
This is a data structure containing the volume mappings for this
logical drive. There are 8 entries in a NetWare volume mapping.
An entry can be null indicating no mapping exists.
Each entry has the following format.
BYTE Name[16]
BYTE Segment"
::= { cpqScsiVolMapEntry 4 }
-- ****************************************************************************
-- SCSI OS Common
-- ==============
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1)
-- cpqScsiOsCommon Group (1.3.6.1.4.1.232.5.2.1.4)
--
--
-- The cpqScsiOsCommon group describes the SCSI common OS interface.
-- This information describes the interface modules general OS interface
-- architectural information.
--
-- Implementation of the cpqScsiOsCommon group is mandatory for all
-- agents that support the SCSI MIB.
--
-- ****************************************************************************
cpqScsiOsCommonPollFreq OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The agent`s polling frequency.
The frequency, in seconds, at which the agent requests
information from the device driver. A frequency of zero
indicates that the agent retrieves the information upon
request of a management station, it does not poll the device
driver at a specific interval.
If the poll frequency is zero (0) all attempts to write to this
object will fail. If the poll frequency is non-zero,
setting this value will change the polling frequency of the
agent. Setting the poll frequency to zero will always
fail, an agent may also choose to fail any request to change
the poll frequency to a value that would severely impact system
performance."
::= { cpqScsiOsCommon 1 }
-- ****************************************************************************
-- SCSI OS Common Module
-- =====================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiInterface Group (1.3.6.1.4.1.232.5.2.1)
-- cpqScsiOsCommon Group (1.3.6.1.4.1.232.5.2.1.4)
-- cpqScsiOsCommonModuleTable (1.3.6.1.4.1.232.5.2.1.4.2) deprecated
--
-- ****************************************************************************
cpqScsiOsCommonModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqScsiOsCommonModuleEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table of software modules that provide an interface to the
device this MIB describes."
::= { cpqScsiOsCommon 2 }
cpqScsiOsCommonModuleEntry OBJECT-TYPE
SYNTAX CpqScsiOsCommonModuleEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A description of a software modules that provide an interface
to the device this MIB describes."
INDEX { cpqScsiOsCommonModuleIndex }
::= { cpqScsiOsCommonModuleTable 1 }
CpqScsiOsCommonModuleEntry ::= SEQUENCE {
cpqScsiOsCommonModuleIndex INTEGER,
cpqScsiOsCommonModuleName DisplayString,
cpqScsiOsCommonModuleVersion DisplayString,
cpqScsiOsCommonModuleDate OCTET STRING,
cpqScsiOsCommonModulePurpose DisplayString
}
cpqScsiOsCommonModuleIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"A unique index for this module description."
::= { cpqScsiOsCommonModuleEntry 1 }
cpqScsiOsCommonModuleName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The module name."
::= { cpqScsiOsCommonModuleEntry 2 }
cpqScsiOsCommonModuleVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The module version in XX.YY format.
Where XX is the major version number and YY is the minor version
number. This field will be a null (size 0) string if the agent
cannot provide the module version."
::= { cpqScsiOsCommonModuleEntry 3 }
cpqScsiOsCommonModuleDate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (7))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The module date.
field octets contents range
===== ====== ======= =====
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minute 0..59
6 7 second 0..60
(use 60 for leap-second)
This field will be set to year = 0 if the agent cannot provide
the module date. The hour, minute, and second field will be set
to zero (0) if they are not relevant. The year field is set
with the most significant octect first."
::= { cpqScsiOsCommonModuleEntry 4 }
cpqScsiOsCommonModulePurpose OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The purpose of the module described in this entry."
::= { cpqScsiOsCommonModuleEntry 5 }
-- ****************************************************************************
-- SCSI Controller Group
-- ====================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiCntlr Group (1.3.6.1.4.1.232.5.2.2)
-- cpqScsiCntlrTable (1.3.6.1.4.1.232.5.2.2.1)
--
--
-- The Cntlr group contains the configuration and statistical information
-- of the SCSI controller.
--
-- Implementation of the Cntlr group is mandatory for all agents that
-- support the SCSI MIB.
--
-- ****************************************************************************
cpqScsiCntlrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqScsiCntlrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SCSI Controller Table."
::= { cpqScsiCntlr 1 }
cpqScsiCntlrEntry OBJECT-TYPE
SYNTAX CpqScsiCntlrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SCSI Controller Table Entry."
INDEX { cpqScsiCntlrIndex, cpqScsiCntlrBusIndex }
::= { cpqScsiCntlrTable 1 }
CpqScsiCntlrEntry ::= SEQUENCE
{
cpqScsiCntlrIndex INTEGER,
cpqScsiCntlrBusIndex INTEGER,
cpqScsiCntlrModel INTEGER,
cpqScsiCntlrFWVers DisplayString,
cpqScsiCntlrSWVers DisplayString,
cpqScsiCntlrSlot INTEGER,
cpqScsiCntlrStatus INTEGER,
cpqScsiCntlrHardResets Counter,
cpqScsiCntlrSoftResets Counter,
cpqScsiCntlrTimeouts Counter,
cpqScsiCntlrBaseIOAddr INTEGER,
cpqScsiCntlrCondition INTEGER,
cpqScsiCntlrSerialNum DisplayString,
cpqScsiCntlrBusWidth INTEGER,
cpqScsiCntlrModelExtended DisplayString,
cpqScsiCntlrHwLocation DisplayString,
cpqScsiCntlrPciLocation DisplayString
}
cpqScsiCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Index.
The controller index indicates to which SCSI adapter instance
this table entry belongs. The controller index is the physical
slot in the computer system where the adapter is located."
::= { cpqScsiCntlrEntry 1 }
cpqScsiCntlrBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter this table entry belongs. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqScsiCntlrEntry 2 }
cpqScsiCntlrModel OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
cpqs710(2),
cpqs94(3),
cpqs810p(4),
cpqs825e(5),
cpqs825p(6),
cpqs974p(7),
cpqs875p(8),
extended(9),
cpqs895p(10),
cpqs896p(11),
cpqa789x(12),
cpqs876t(13),
hpu320(14),
hpu320r(15),
generic(16),
hp1u320g2(17),
hp1u320g1(18),
hpSc11Xe(19)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Model.
The is the controller`s model and can be used for identification
purposes. The following values are defined:
other(1) The management agent does not recognize this model.
You may need to upgrade your software.
cpqs710(2) Compaq 32-Bit Fast SCSI-2 Controller.
cpqs94(3) Compaq Systempro/XL Integrated SCSI-2 Options Port.
cpqs810p(4) Integrated Fast-SCSI-2 Controller/P.
cpqs825e(5) Compaq 32-Bit Fast-Wide SCSI-2 /E Controller.
cpqs825p(6) Compaq 32-Bit Fast-Wide SCSI-2 /P Controller.
cpqs974p(7) Deskpro XL Integrated PCI SCSI-2 Controller.
cpqs875p(8) Compaq Wide-Ultra SCSI Controller.
extended(9) SCSI Controllers described by
cpqScsiCntlrModelExtended.
cpqs895p(10) Compaq Wide Ultra2 SCSI Controller.
cpqs896p(11) Compaq 64-Bit Dual Channel Wide Ultra2 SCSI
Controller.
cpqa789x(12) Compaq Wide Ultra3 SCSI Adapter.
cpqs876t(13) Compaq StorageWorks Library Adapter.
hpu320(14) HP 64-Bit/133MHz PCI-X 2CH Ultra320 HBA.
hpu320r(15) HP PCI-X Dual Channel Ultra320 SCSI Adapter.
generic(16) SCSI HBA.
hp1u320g2(17) HP Single Channel Ultra320 SCSI HBA G2.
hp1u320g1(18) HP Single Channel Ultra320 SCSI HBA.
hpSc11Xe(19) HP SC11Xe Host Bus Adapter."
::= { cpqScsiCntlrEntry 3 }
cpqScsiCntlrFWVers OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Firmware Version.
This is the version of the firmware on the SCSI controller.
If the SCSI controller does not use firmware then this string
will be of length zero (0). Some SCSI bus controllers are
script driven and use the computer system`s microprocessor
thus not needing firmware."
::= { cpqScsiCntlrEntry 4 }
cpqScsiCntlrSWVers OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Controller Software Version.
This is the version of any software upgrade which is being used
in place of the firmware with the controller. If the SCSI
controller has not been upgraded via software or does not have
firmware then this string will be of length zero (0).
Some SCSI bus controllers are script driven and use the
computer system`s microprocessor thus not needing firmware."
::= { cpqScsiCntlrEntry 5 }
cpqScsiCntlrSlot OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Slot.
This is the physical slot in which this controller is
installed. This information can be used for identification
purposes."
::= { cpqScsiCntlrEntry 6 }
cpqScsiCntlrStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
failed(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Status.
This is the current status of the controller. The following
values are currently defined:
other(1)
The controller is not operational due to reasons other than
hardware failure. The controller may be intentionally disabled.
The controller configuration may be in conflict with the
configuration of other hardware or software in the system.
The controller may have failed initialization. Corrective
action is Operating System dependent. Check for diagnostic
messages which may have occurred at system boot time.
ok(2)
The controller is operating normally.
failed(3)
The controller has failed and is no longer operating.
Please run diagnostics on the computer system to help
identify the problem."
::= { cpqScsiCntlrEntry 7 }
cpqScsiCntlrHardResets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Hard Resets.
This is the number of times the SCSI Hardware Interface driver
detected that the SCSI bus has been reset since the driver
was loaded.
Hard resets may occasionally occur due to device errors.
If this value should rise dramatically, you may have a problem.
Check the SCSI bus statistics for unusually high error counts.
If there is a device with a large number of bus errors, it may be
failing and should be replaced."
::= { cpqScsiCntlrEntry 8 }
cpqScsiCntlrSoftResets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Soft Resets.
This is the number of times the SCSI Hardware Interface driver
has issued a reset command to all devices on a SCSI bus since
the driver was loaded.
Soft resets occur when the device driver is initializing the SCSI
bus for operation and when device errors have left the bus in an
ambiguous state. If this value should rise dramatically, you may
have a problem. Check the SCSI bus statistics for unusually high
error counts. If there is a device with a large number of bus
errors, it may be failing and should be and should be replaced."
::= { cpqScsiCntlrEntry 9 }
cpqScsiCntlrTimeouts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Time-outs.
This is the number of times, since the driver was loaded, that
the SCSI Hardware Interface driver issued a SCSI command but
did not receive a reply within a specified amount of time.
Timeouts may occasionally occur when a device fails to process a
request because the SCSI bus was busy. If this value should rise
dramatically, you may have a problem. Check if you have any
non-disk SCSI devices, like tape drives, on the SCSI bus with
the drives. Sometimes a non-disk device can hold the SCSI bus
for long periods of time causing time-outs."
::= { cpqScsiCntlrEntry 10 }
cpqScsiCntlrBaseIOAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Base I/O Address.
This is the I/O address that the SCSI Hardware Interface driver
uses to communicate with the SCSI bus controller. This value
can be used for identification purposes."
::= { cpqScsiCntlrEntry 11 }
cpqScsiCntlrCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Condition.
This is the overall condition of the controller and all of the
logical drives and physical drives controlled by it.
The following values are defined:
other(1)
The management agent does not recognize the status as one of
those listed below.
ok(2)
The controller and all of its logical drives and physical
drives are operating normally. No user action is required.
degraded(3)
One or more of the controller`s logical drives or physical
drives is degraded. You need to check the status of all
logical drives and physical drives.
failed(4)
The controller status is failed. The drives on this
controller are inaccessible. Please refer to the controller
status field for further information."
::= { cpqScsiCntlrEntry 12 }
cpqScsiCntlrSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Serial Number.
This is the serial number assigned to the controller. This can
be used for identification purposes. This field will be a null
(size 0) string if the management agent cannot provide the
serial number."
::= { cpqScsiCntlrEntry 13 }
cpqScsiCntlrBusWidth OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
narrow(2),
wide16(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Data Bus Width.
This is the physical width of the controller`s SCSI data bus.
other(1)
The management agent does not recognize this width. You may
need to upgrade your software.
narrow(2)
The SCSI controller supports an 8-bit narrow SCSI data bus.
wide16(3)
The SCSI controller supports a 16-bit wide SCSI data bus."
::= { cpqScsiCntlrEntry 14 }
cpqScsiCntlrModelExtended OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Controller Model Name.
This is the model name for SCSI controllers not defined by
cpqScsiCntlrModel enumerations. This field will be a null (size 0)
string if the management agent cannot provide the SCSI Controller
description."
::= { cpqScsiCntlrEntry 15 }
cpqScsiCntlrHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A text description of the hardware location, on complex
multi SBB hardware only, for the SCSI controller.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqScsiCntlrEntry 16 }
cpqScsiCntlrPciLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"A string designating the PCI device location for the controller,
following the format DDDD:BB:DD.F, where DDDD is the PCI domain number,
BB is the PCI bus number, DD is the PCI device number, and F is
the PCI function number.
A NULL string indicates that the location could not
be determined or is irrelevant."
::= { cpqScsiCntlrEntry 17 }
-- ****************************************************************************
-- SCSI Logical Drive Group
-- ========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiLogDrv Group (1.3.6.1.4.1.232.5.2.3)
-- cpqScsiLogDrvTable (1.3.6.1.4.1.232.5.2.3.1)
--
--
-- The LogDrv group contains configuration and statistical information
-- about the logical drives associated with SCSI controllers.
--
-- Implementation of the LogDrv group is optional for agents that
-- support the SCSI MIB.
--
-- ****************************************************************************
cpqScsiLogDrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqScsiLogDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Table."
::= { cpqScsiLogDrv 1 }
cpqScsiLogDrvEntry OBJECT-TYPE
SYNTAX CpqScsiLogDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Entry."
INDEX { cpqScsiLogDrvCntlrIndex, cpqScsiLogDrvBusIndex,
cpqScsiLogDrvIndex }
::= { cpqScsiLogDrvTable 1 }
CpqScsiLogDrvEntry ::= SEQUENCE
{
cpqScsiLogDrvCntlrIndex INTEGER,
cpqScsiLogDrvBusIndex INTEGER,
cpqScsiLogDrvIndex INTEGER,
cpqScsiLogDrvFaultTol INTEGER,
cpqScsiLogDrvStatus INTEGER,
cpqScsiLogDrvSize INTEGER,
cpqScsiLogDrvPhyDrvIDs OCTET STRING,
cpqScsiLogDrvCondition INTEGER,
cpqScsiLogDrvStripeSize INTEGER,
cpqScsiLogDrvAvailSpares OCTET STRING,
cpqScsiLogDrvPercentRebuild Gauge,
cpqScsiLogDrvOsName DisplayString
}
cpqScsiLogDrvCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Controller Index.
The controller index indicates to which SCSI adapter instance
this table entry belongs."
::= { cpqScsiLogDrvEntry 1 }
cpqScsiLogDrvBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter this table entry belongs."
::= { cpqScsiLogDrvEntry 2 }
cpqScsiLogDrvIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Index.
The logical drive index indicates to which logical drive instance
on a SCSI bus this table entry belongs."
::= { cpqScsiLogDrvEntry 3 }
cpqScsiLogDrvFaultTol OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
none(2),
mirroring(3),
dataGuard(4),
distribDataGuard(5),
enhancedMirroring(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Fault Tolerance.
This shows the fault tolerance mode of the logical drive.
The following values are valid for the Logical Drive
Fault Tolerance:
other(1)
The management agent does not recognize the status.
You may need to upgrade your software.
none(2)
Fault tolerance is not enabled. If a physical drive reports an
error, the data cannot be recovered. This is known as RAID 0.
mirroring(3)
For each physical drive, there is a second physical drive
containing identical data. If a drive fails, the data can be
retrieved from the mirror drive.
dataGuard(4)
One of the physical drives is used as a data guard drive and
contains the exclusive OR of the data on the remaining drives.
If a failure is detected, the data is rebuilt using the data
guard information plus information from the other drives.
distribDataGuard(5)
Distributed Data Guarding, sometimes referred to as RAID 5, is
similar to Data Guarding, but instead of storing the parity
information on one drive, the information is distributed across
all of the drives. If a failure is detected, the data is
rebuilt using the data guard information from all the drives.
enhancedMirroring(6)
This is used when there are more than 2 physical disks. Each
`mirrored stripe` is written to a disk and is mirrored to an
`adjacent` disk. This is commonly referred to as RAID 1E.
If a failure is detected, the data is rebuilt using the data
from the mirrored stripes on the other drives."
::= { cpqScsiLogDrvEntry 4 }
cpqScsiLogDrvStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
failed(3),
unconfigured(4),
recovering(5),
readyForRebuild(6),
rebuilding(7),
wrongDrive(8),
badConnect(9),
degraded(10),
disabled(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Status.
The logical drive can be in one of the following states:
other(1)
The management agent does not recognize the status.
You may need to upgrade your software.
ok(2)
Indicates that the logical drive is in normal operation mode.
No user action is required.
failed(3)
Indicates that more physical drives have failed than the fault
tolerance mode of the logical drive can handle without data loss.
unconfigured(4)
Indicates that the logical drive is not configured. Insure all
of the drive switches are properly set and run the configuration
utility.
recovering(5)
Indicates that the logical drive is using Interim Recovery Mode.
In Interim Recovery Mode, at least one physical drive has
failed, but the logical drive`s fault tolerance mode lets the
logical drive continue to operate with no data loss.
You should replace the failed drive as soon as possible.
readyRebuild(6)
Indicates that the logical drive is ready for Automatic Data
Recovery. The physical drive that failed has been replaced,
but the logical drive is still operating in Interim Recovery
Mode.
rebuilding(7)
Indicates that the logical drive is currently resynchronizing
the data accross the physical drives in the logical drive.
wrongDrive(8)
Indicates that the wrong physical drive was replaced after a
physical drive failure. You need to return the drive
incorrectly replaced and replace the failed drive.
badConnect(9)
Indicates that a physical drive is not responding. Check the
cables connected to it.
degraded(10)
Indicates that the logical drive is in a degraded state.
disabled(11)
Indicates that the logical drive is disabled. The logical drive
configuration utility can enable or disable the logical drive.
You should enable the logical drive using the configuration
utility."
::= { cpqScsiLogDrvEntry 5 }
cpqScsiLogDrvSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Size.
This is the size of the logical drive in megabytes.
This value is calculated using the value 1,048,576 (2^20) as
a megabyte. Drive manufacturers sometimes use the
number 1,000,000 as a megabyte when giving drive capacities
so this value may differ from the advertised size of a drive."
::= { cpqScsiLogDrvEntry 6 }
cpqScsiLogDrvPhyDrvIDs OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Physical Drive IDs.
This lists the physical drive SCSI ID`s which are associated
with this logical drive. These are the same IDs which can be
used as indices into the physical drive table. Each byte of
the string is an index."
::= { cpqScsiLogDrvEntry 7 }
cpqScsiLogDrvCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Condition.
This is the overall condition of the logical drive and all of the
physical drives which comprise it.
The following values are defined:
other(1)
The management agent does not recognize the status. You may
need to upgrade your software.
ok(2)
The logical drive and all of its physical drives are operating
normally. No user action is required.
degraded(3)
Either the logical drive is degraded or one or more of its
physical drives is degraded. You need to check the status
of the logical drive and of all its physical drives.
failed(4)
Either the logical drive has failed or one or more of its
physical drives has failed. You need to check the status
of the logical drive and of all its physical drives."
::= { cpqScsiLogDrvEntry 8 }
cpqScsiLogDrvStripeSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Stripe Size.
This is the size of a logical drive stripe in kilobytes."
::= { cpqScsiLogDrvEntry 9 }
cpqScsiLogDrvAvailSpares OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Logical Drive Available Spares.
This indicates if this logical drive has one or more spares
designated for it that are not currently in use by another drive.
Each octet present will be a physical drive ID that is an
available spare for this logical drive. These are the same ID`s
which can be used as indexes into the physical drive table.
An octet string of length zero indicates that there are no
available spares for this logical drive."
::= { cpqScsiLogDrvEntry 10 }
cpqScsiLogDrvPercentRebuild OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Percent Rebuild.
After a failed physical drive has been replaced, the physical
drive must have its data rebuilt. This value is the percent
complete of the rebuild. When the value reaches 100, the
rebuilding process is complete. The drive array continues to
operate in interim recovery mode while a drive is rebuilding.
This value is only valid if the Logical Drive Status is
rebuilding(7).
If the value cannot be determined or a rebuild is not active,
the value is set to 0."
::= { cpqScsiLogDrvEntry 11 }
cpqScsiLogDrvOsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive OS Name.
The OS name for this array logical drive. This field will be
a null (size 0) string if the agent does not support OS name."
::= { cpqScsiLogDrvEntry 12 }
-- ****************************************************************************
-- SCSI Physical Drive Group
-- =========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiPhyDrv Group (1.3.6.1.4.1.232.5.2.4)
-- cpqScsiPhyDrvTable (1.3.6.1.4.1.232.5.2.4.1)
--
-- The PhyDrv group contains configuration and statistical information
-- about the physical drives associated with SCSI controllers.
--
-- Implementation of the PhyDrv group is mandatory for all agents that
-- support the SCSI MIB.
--
-- ****************************************************************************
cpqScsiPhyDrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqScsiPhyDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Table."
::= { cpqScsiPhyDrv 1 }
cpqScsiPhyDrvEntry OBJECT-TYPE
SYNTAX CpqScsiPhyDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Entry."
INDEX { cpqScsiPhyDrvCntlrIndex, cpqScsiPhyDrvBusIndex,
cpqScsiPhyDrvIndex }
::= { cpqScsiPhyDrvTable 1 }
CpqScsiPhyDrvEntry ::= SEQUENCE
{
cpqScsiPhyDrvCntlrIndex INTEGER,
cpqScsiPhyDrvBusIndex INTEGER,
cpqScsiPhyDrvIndex INTEGER,
cpqScsiPhyDrvModel DisplayString,
cpqScsiPhyDrvFWRev DisplayString,
cpqScsiPhyDrvVendor DisplayString,
cpqScsiPhyDrvSize INTEGER,
cpqScsiPhyDrvScsiID INTEGER,
cpqScsiPhyDrvStatus INTEGER,
cpqScsiPhyDrvServiceHours Counter,
cpqScsiPhyDrvHighReadSectors Counter,
cpqScsiPhyDrvLowReadSectors Counter,
cpqScsiPhyDrvHighWriteSectors Counter,
cpqScsiPhyDrvLowWriteSectors Counter,
cpqScsiPhyDrvHardReadErrs Counter,
cpqScsiPhyDrvHardWriteErrs Counter,
cpqScsiPhyDrvEccCorrReads Counter,
cpqScsiPhyDrvRecvReadErrs Counter,
cpqScsiPhyDrvRecvWriteErrs Counter,
cpqScsiPhyDrvSeekErrs Counter,
cpqScsiPhyDrvSpinupTime INTEGER,
cpqScsiPhyDrvUsedReallocs Counter,
cpqScsiPhyDrvTimeouts Counter,
cpqScsiPhyDrvPostErrs Counter,
cpqScsiPhyDrvPostErrCode INTEGER,
cpqScsiPhyDrvCondition INTEGER,
cpqScsiPhyDrvFuncTest1 Gauge,
cpqScsiPhyDrvFuncTest2 Gauge,
cpqScsiPhyDrvStatsPreserved INTEGER,
cpqScsiPhyDrvSerialNum DisplayString,
cpqScsiPhyDrvLocation INTEGER,
cpqScsiPhyDrvParent INTEGER,
cpqScsiPhyDrvSectorSize INTEGER,
cpqScsiPhyDrvHotPlug INTEGER,
cpqScsiPhyDrvPlacement INTEGER,
cpqScsiPhyDrvPreFailMonitoring INTEGER,
cpqScsiPhyDrvOsName DisplayString,
cpqScsiPhyDrvRotationalSpeed INTEGER,
cpqScsiPhyDrvMemberLogDrv INTEGER
}
cpqScsiPhyDrvCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Controller Index.
The controller index indicates to which SCSI adapter instance
this table entry belongs. The controller index is the physical
slot in the computer where the adapter is located."
::= { cpqScsiPhyDrvEntry 1 }
cpqScsiPhyDrvBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter this table entry belongs. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqScsiPhyDrvEntry 2 }
cpqScsiPhyDrvIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Index.
The physical drive index indicates to which physical drive
instance on a SCSI bus this table entry belongs. The physical
drive index is the SCSI ID being used by that drive."
::= { cpqScsiPhyDrvEntry 3 }
cpqScsiPhyDrvModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Model.
This is a description of the physical drive`s model as returned
by the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqScsiPhyDrvEntry 4 }
cpqScsiPhyDrvFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Firmware Revision.
This is the revision level of the physical drive as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqScsiPhyDrvEntry 5 }
cpqScsiPhyDrvVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Vendor.
This is the physical drive vendor`s name as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqScsiPhyDrvEntry 6 }
cpqScsiPhyDrvSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Size in MB.
This is the size of the physical drive in megabytes.
This value is calculated using the value 1,048,576 (2^20) as
a megabyte. Drive manufacturers sometimes use the number
1,000,000 as a megabyte when giving drive capacities so this
value may differ from the advertised size of a drive."
::= { cpqScsiPhyDrvEntry 7 }
cpqScsiPhyDrvScsiID OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive SCSI ID.
This is the SCSI ID used by the physical drive. SCSI ID`s
identify a physical drive on a bus so the controller can
communicate with it."
::= { cpqScsiPhyDrvEntry 8 }
cpqScsiPhyDrvStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
failed(3),
notConfigured(4),
badCable(5),
missingWasOk(6),
missingWasFailed(7),
predictiveFailure(8),
missingWasPredictiveFailure(9),
offline(10),
missingWasOffline(11),
hardError(12)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Status.
The physical drive can be in one of the following states:
other(1)
The drive is in a state other than one of those listed
below.
ok(2)
Indicates that the physical drive is in normal operation mode.
No user action is necessary.
failed(3)
Indicates that the physical drive has failed and can no longer
return data. When convenient, you should bring down the server
and run diagnostics to help identify the problem.
The drive may need to be replaced.
notConfigured(4)
Indicates that the physical drive is not configured. You
need to insure all of the drive`s switches are properly set
and that the configuration utility has been run.
badCable(5)
Indicates that a physical drive is not responding.
You should check the cables connected to it. You can bring
down the server and run diagnostics to help identify
the problem.
missingWasOk(6)
Indicates that a physical drive had a status of OK and is no
longer present. The drive has been removed.
missingWasFailed(7)
Indicates that a physical drive had a status of FAILED and is
no longer present. The drive has been removed.
predictiveFailure(8)
Indicates that the physical drive has exceeded a threshold
value for one of it`s predictive indicators. When convenient,
you should bring down the server and run diagnostics to
help identify the problem. The drive may need to be replaced.
missingWasPredictiveFailure(9)
Indicates that a physical drive had a status of PREDICTIVE
FAILURE and is no longer present. The drive has been removed.
offline(10)
Indicates that the physical drive is offline and can no longer
return data. No further status is available.
missingWasOffline(11)
Indicates that a physical drive had a status of OFFLINE
and is no longer present. The drive has been removed.
hardError(12)
Indicates that a hard error occurred for this physical drive."
::= { cpqScsiPhyDrvEntry 9 }
cpqScsiPhyDrvServiceHours OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Service Time in hours.
This shows the total number of hours that a physical drive has
been operating under the device driver. You can use the service
time to calculate rates for other physical drive objects."
::= { cpqScsiPhyDrvEntry 10 }
cpqScsiPhyDrvHighReadSectors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Sectors Read (high).
The phyDrvHighReadSectors and the phyDrvlowReadSectors together
show the total number of sectors read from the physical disk
drive during the service time (phyDrvServiceHours).
The actual number of sectors read equals the phyDrvHighReadSectors
times 2^32 plus the phyDrvLowReadSectors.
This information may be useful for determining rates.
For example, if you want to calculate the average number of
reads per hour of operation, divide this number by the service
time."
::= { cpqScsiPhyDrvEntry 11 }
cpqScsiPhyDrvLowReadSectors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Sectors Read (low).
The phyDrvHighReadSectors and the phyDrvlowReadSectors together
show the total number of sectors read from the physical disk
drive during the service time (phyDrvServiceHours).
The actual number of sectors read equals the phyDrvHighReadSectors
times 2^32 plus the phyDrvLowReadSectors.
This information may be useful for determining rates.
For example, if you want to calculate the average number of reads
per hour of operation, divide this number by the service time."
::= { cpqScsiPhyDrvEntry 12 }
cpqScsiPhyDrvHighWriteSectors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Sectors Written (high).
The phyDrvHighWriteSectors and the phyDrvlowWriteSectors together
show the total number of sectors written to the physical disk
drive during the service time (phyDrvServiceHours).
The actual number of sectors read equals the phyDrvHighWriteSectors
times 2^32 plus the phyDrvLowWriteSectors.
This information may be useful for determining rates.
For example, if you want to calculate the average number of
writes per hour of operation, divide this number by the service
time."
::= { cpqScsiPhyDrvEntry 13 }
cpqScsiPhyDrvLowWriteSectors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Sectors Written (low).
The phyDrvHighWriteSectors and the phyDrvlowWriteSectors together
show the total number of sectors written to the physical disk
drive during the service time (phyDrvServiceHours).
The actual number of sectors read equals the phyDrvHighWriteSectors
times 2^32 plus the phyDrvLowWriteSectors.
This information may be useful for determining rates.
For example, if you want to calculate the average number of
writes per hour of operation, divide this number by the service
time."
::= { cpqScsiPhyDrvEntry 14 }
cpqScsiPhyDrvHardReadErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Hard Read Errors.
This is the number of read errors that have occurred on a drive
that could not be recovered by a physical drive`s Error Correction
Code (ECC) algorithm, retries or any other recovery mechanisms
during the service time (phyDrvServiceHours).
If you see any hard read errors there may be a problem.
This is often caused by bad media sections on the drive. If the
error count continues to rise you may need to replace the drive."
::= { cpqScsiPhyDrvEntry 15 }
cpqScsiPhyDrvHardWriteErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Hard Write Errors.
This is the number of write errors that have occurred on a drive
that could not be recovered by retries or any other recovery
mechanisms during the service time (phyDrvServiceHours).
If you see any hard write errors there may be a problem.
This is often caused by bad media sections on the drive. If the
error count continues to rise you may need to replace the drive."
::= { cpqScsiPhyDrvEntry 16 }
cpqScsiPhyDrvEccCorrReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive ECC Corrected Read Errors (high).
This is the number of read requests that the drive had to use
an Error Correction Code (ECC) algorithm on to recover data
during the service time (phyDrvServiceHours).
ECC corrected reads will occasionally occur over time. Having a
large number of ECC corrected errors does not necessarily indicate
that the drive is failing. However, you may wish to replace a
drive with an abnormally high amount in comparison to other
similar drives as a precaution."
::= { cpqScsiPhyDrvEntry 17 }
cpqScsiPhyDrvRecvReadErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Recovered Read Errors.
This is the number of read requests that the drive had to use
retries or other recovery mechanisms on to recover data during
the service time (phyDrvServiceHours).
Retry corrected reads will occasionally occur over time.
Having a large number of retry corrected errors does not
necessarily indicate that the drive is failing. However, you
may wish to replace a drive with an abnormally high amount in
comparison to other similiar drives as a precaution."
::= { cpqScsiPhyDrvEntry 18 }
cpqScsiPhyDrvRecvWriteErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Recovered Write Errors.
This is the number of write requests that the drive had to use
retries or other recovery mechanisms on to recover data during
the service time (phyDrvServiceHours).
Retry corrected writes will occasionally occur over time.
Having a large number of retry corrected errors does not
necessarily indicate that the drive is failing. However, you
may wish to replace a drive with an abnormally high amount in
comparison to other similiar drives as a precaution."
::= { cpqScsiPhyDrvEntry 19 }
cpqScsiPhyDrvSeekErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Seek Errors.
This is the number of times a drive head seek failed during the
service time (phyDrvServiceHours).
Seek errors will occasionally occur over time. Having a
large number of seek errors does not necessarily indicate
that the drive is failing. However, you may wish to replace
a drive with an abnormally high amount in comparison to other
similiar drives as a precaution."
::= { cpqScsiPhyDrvEntry 20 }
cpqScsiPhyDrvSpinupTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Spin up Time (tenths of seconds).
This is the time it takes for a physical drive to spin up to full
speed.
Disks require time to gain momentum and reach operating speed.
As cars are tested to go from 0 mph to 60 mph in x number of
seconds, drive manufacturers have preset expectations for the
time it takes the drive to spin to full speed. Drives that do
not meet these expectations may have problems.
If the drive is having problems spinning up, this value will
increase over time. Eventually, the drive may fail to spin up
altogether. If you see a large increase in this value over
time, you may want to replace the drive as a precaution."
::= { cpqScsiPhyDrvEntry 21 }
cpqScsiPhyDrvUsedReallocs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Used Reallocation Sectors.
This shows the number of sectors of the reallocation area that
have been used by the physical drive over the life of the drive.
Because of the nature of magnetic disks, certain sectors on a
drive may have media defects. The reallocation area is part of
the disk drive that the drive manufacturer sets aside to
compensate for these defects. The drive writes information
addressed from these unusable sectors to available sectors in
the reallocation area.
If all of the reserved sectors have been used, then there is
no way for the drive to remap bad sectors and the drive will
start failing. Unfortunately, the number of reallocation
sectors originally reserved for this purpose is drive specific
and you must contact the drive vendor for these values.
If the current value starts to approach the maximum reserved you
may wish to replace the drive before it fails."
::= { cpqScsiPhyDrvEntry 22 }
cpqScsiPhyDrvTimeouts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Time-out Errors.
This is the number of times the drive failed to complete a request
within a specified amount of time during the service time
(phyDrvServiceHours).
Time-outs may occasionally occur when a device fails to process a
request because the SCSI bus was busy. If this value should rise
dramatically, you may have a problem. Check if you have any
non-disk SCSI devices, like tape drives, on the SCSI bus with
the drives. Sometimes a non-disk device can hold onto the SCSI
bus for long periods of time causing time-outs."
::= { cpqScsiPhyDrvEntry 23 }
cpqScsiPhyDrvPostErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Power On Self Test (POST) Errors.
This is the number of times that a drive failed its self test
during the service time (phyDrvServiceHours). The drive does
a self test each time power is applied to the system.
If you see any self test errors there may be a problem.
You can run diagnostics to help identify the problem."
::= { cpqScsiPhyDrvEntry 24 }
cpqScsiPhyDrvPostErrCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Last POST Error Code.
This is the result of the last SCSI command which caused a self
test to fail. The value is split into three fields. The first
byte is the SCSI Sense Qualifier. The second byte is the
SCSI Sense Code. The third byte is the SCSI Sense Key. You
will need to refer to a SCSI-2 specification for the valid values
of these fields."
::= { cpqScsiPhyDrvEntry 25 }
cpqScsiPhyDrvCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Condition.
This is the overall condition of the physical drive.
The following values are defined:
other(1)
The agent does not recognize the status. You may need
to upgrade your software.
ok(2)
The physical drive is operating normally. No user action
is required.
degraded(3)
The physical drive is degraded. You need to check the status
of all logical drives and physical drives.
failed(4)
The physical drives has failed. When convenient, you
should bring down the server and run diagnostics
to help identify the problem."
::= { cpqScsiPhyDrvEntry 26 }
cpqScsiPhyDrvFuncTest1 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Functional Test 1.
This is a percentage value that represents the operating
efficiency of a drive. The functional test issues a series of
SCSI commands and times the results. When the drive has the
test run for the very first time (service time is zero), the
results are saved as the baseline value. Then, whenever the
test is executed the current result is compared to the baseline
result and expressed as a percent.
If the percentage result should drop rapidly there may be a
problem with the drive. You may wish to replace the drive as a
precaution."
::= { cpqScsiPhyDrvEntry 27 }
cpqScsiPhyDrvFuncTest2 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Functional Test 2.
This is a percentage value that represents the operating
efficiency of a drive. The functional test issues a series of
SCSI commands and times the results. When the drive has the
test run for the very first time (service time is zero), the
results are saved as the baseline value. Then, whenever the
test is executed the current result is compared to the baseline
result and expressed as a percent.
If the percentage result should drop rapidly there may be a
problem with the drive. You may wish to replace the drive as a
precaution."
::= { cpqScsiPhyDrvEntry 28 }
cpqScsiPhyDrvStatsPreserved OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
inNVRAM(2),
onDisk(3),
noCPUSupport(4),
noFreeNVRAM(5),
noDrvSupport(6),
noSoftwareSupport(7),
statsNotSupported(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Statistics Preservation Method.
This value indicates how all of the objects in this table
are saved over a power cycle. If the objects are not saved
then all of their values will be reset whenever the device
driver is unloaded. The following values are defined:
other(1)
The agent does not recognize the status. You may
need to upgrade your software.
inNVRAM(2)
The objects are saved in non-volatile memory in the
computer system.
onDisk(3)
The objects are saved on the physical drives in reserved
sectors.
noCPUSupport(4)
The objects are not saved across power cycles because
the hardware does not support this operation.
noFreeNVRAM(5)
The objects are not saved across power cycles because
all of the available non-volatile memory is in use.
noDrvSupport(6)
The objects are not saved across power cycles because
the physical drive does not contain a unique identifier to
save it under.
noSoftwareSupport(7)
The objects are not saved across power cycles because
either the device driver or computer system firmware do not
provide support.
statsNotSupported(8)
Drive statistics are not supported."
::= { cpqScsiPhyDrvEntry 29 }
cpqScsiPhyDrvSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Serial Number.
This is the serial number assigned to the physical drive.
This value is based upon the serial number as returned by the
SCSI inquiry command but may have been modified due to space
limitations. This can be used for identification purposes."
::= { cpqScsiPhyDrvEntry 30 }
cpqScsiPhyDrvLocation OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
proliant(2)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Physical Drive Location.
This is the physical location of where the drive is located. The
following values are defined:
other(1)
The drives are not located in any special product that
identifies the location.
proliant(2)
The drives are located in the ProLiant Storage System."
::= { cpqScsiPhyDrvEntry 31 }
cpqScsiPhyDrvParent OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Parent.
This is the logical drive index to which this physical
drive belongs."
::= { cpqScsiPhyDrvEntry 32 }
cpqScsiPhyDrvSectorSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Sector Size in Bytes.
This allows one to convert counters that are reported in sectors
to bytes."
::= { cpqScsiPhyDrvEntry 33 }
cpqScsiPhyDrvHotPlug OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hotPlug(2),
nonHotPlug(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Hot Plug Support Status.
The following values are defined:
other(1)
The agent is unable to determine if this drive
supports hot plug replacement.
hotPlug(2)
The drive supports hot plug replacement.
nonhotPlug(3)
The drive does not support hot plug replacement."
::= { cpqScsiPhyDrvEntry 34 }
cpqScsiPhyDrvPlacement OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
internal(2),
external(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Placement.
The following values are defined:
other(1)
The agent is unable to determine if the drive is internal or
external to the system chassis.
internal(2)
The drive is located in an internal Proliant system chassis.
external(3)
The drive is located in an external Proliant storage system."
::= { cpqScsiPhyDrvEntry 35 }
cpqScsiPhyDrvPreFailMonitoring OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notAvailable(2),
available(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Predictive Failure Monitoring.
The following values are defined:
other(1)
The agent is unable to determine if the drive supports
predictive failure monitoring.
notAvailable(2)
This drive does not support predictive failure monitoring.
available(3)
This drive supports predictive failure monitoring."
::= { cpqScsiPhyDrvEntry 36 }
cpqScsiPhyDrvOsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive OS Name.
The OS name for this SCSI physical drive. This field will be
a null (size 0) string if the agent does not support OS name."
::= { cpqScsiPhyDrvEntry 37 }
cpqScsiPhyDrvRotationalSpeed OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rpm7200(2),
rpm10K(3),
rpm15K(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Physical Drive Rotational Speed.
The following values are defined:
other(1)
The agent is unable to determine the rotational speed for
this drive.
rpm7200(2)
The rotational speed for this drive is 7200 rpm.
rpm10K(3)
The rotational speed for this drive is 10000 rpm.
rpm15K(4)
The rotational speed for this drive is 15000 rpm."
::= { cpqScsiPhyDrvEntry 38 }
cpqScsiPhyDrvMemberLogDrv OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
member(2),
spare(3),
nonMember(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Physical Drive is a Member of a Logical Drive.
This is an indication of whether the physical drive is
a member of a SCSI logical drive.
This variable can be in one of the following states:
other(1)
The agent is unable to determine if the physical drive is a
member of a logical drive.
member(2)
The physical drive is a member of a logical drive.
spare(2)
The physical drive is a spare drive for a logical drive.
nonMember(4)
The physical drive is not a logical drive member or spare."
::= { cpqScsiPhyDrvEntry 39 }
-- ****************************************************************************
-- SCSI Target Group
-- =================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiTarget Group (1.3.6.1.4.1.232.5.2.5)
-- cpqScsiTargetTable (1.3.6.1.4.1.232.5.2.5.1)
--
-- The SCSI target group describes the generic SCSI bus information about
-- the SCSI bus targets (devices) in the system.
--
-- Implementation of the SCSI target group is mandatory for all agents
-- supporting the SCSI MIB.
--
-- ****************************************************************************
cpqScsiTargetTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqScsiTargetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SCSI Target Table."
::= { cpqScsiTarget 1 }
cpqScsiTargetEntry OBJECT-TYPE
SYNTAX CpqScsiTargetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SCSI Target Entry."
INDEX { cpqScsiTargetCntlrIndex, cpqScsiTargetBusIndex,
cpqScsiTargetScsiIdIndex }
::= { cpqScsiTargetTable 1 }
CpqScsiTargetEntry ::= SEQUENCE
{
cpqScsiTargetCntlrIndex INTEGER,
cpqScsiTargetBusIndex INTEGER,
cpqScsiTargetScsiIdIndex INTEGER,
cpqScsiTargetType INTEGER,
cpqScsiTargetModel DisplayString,
cpqScsiTargetFWRev DisplayString,
cpqScsiTargetVendor DisplayString,
cpqScsiTargetParityErrs Counter,
cpqScsiTargetPhaseErrs Counter,
cpqScsiTargetSelectTimeouts Counter,
cpqScsiTargetMsgRejects Counter,
cpqScsiTargetNegPeriod INTEGER,
cpqScsiTargetLocation INTEGER,
cpqScsiTargetNegSpeed INTEGER,
cpqScsiTargetPhysWidth INTEGER,
cpqScsiTargetNegWidth INTEGER,
cpqScsiTargetTypeExtended INTEGER,
cpqScsiTargetCurrentSpeed INTEGER
}
cpqScsiTargetCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Target Controller Index.
The controller index indicates to which SCSI adapter instance
this table entry belongs. The controller index is the physical
slot in the computer system where the adapter is located."
::= { cpqScsiTargetEntry 1 }
cpqScsiTargetBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Target Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter card this table entry belongs. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqScsiTargetEntry 2 }
cpqScsiTargetScsiIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Target Device Index.
The device index indicates to which device instance on a
SCSI bus this table entry belongs. The device index
is the SCSI ID being used by that device."
::= { cpqScsiTargetEntry 3 }
cpqScsiTargetType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
disk(2),
tape(3),
printer(4),
processor(5),
wormDrive(6),
cd-rom(7),
scanner(8),
optical(9),
jukeBox(10),
commDev(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Type.
This is the type of SCSI device. The following types are defined:
other(1)
The agent does not recognize this type.
You may need to upgrade your software.
disk(2)
This is a direct-access device like a disk drive.
tape(3)
This is a sequential-access device like a tape drive.
printer(4)
This is a printer device.
processor(5)
This is a processor device like the ProLiant Storage System.
worm(6)
This is a write-once, read-many times device.
cd-rom(7)
This is a CD or DVD device.
scanner(8)
This is a scanner device.
optical(9)
This is an optical memory device.
jukeBox(10)
This is a media changer device like a jukebox.
commDev(11)
This is a communications device like a LAN bridge."
::= { cpqScsiTargetEntry 4 }
cpqScsiTargetModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Model.
This is a description of the device`s model as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqScsiTargetEntry 5 }
cpqScsiTargetFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Firmware Revision.
This is the revision level of the device as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqScsiTargetEntry 6 }
cpqScsiTargetVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Vendor.
This is the device vendor`s name as returned by the SCSI
inquiry command. This can be used for identification purposes."
::= { cpqScsiTargetEntry 7 }
cpqScsiTargetParityErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Bus Parity Errors.
This is the number of parity errors seen on the SCSI bus while
processing commands for this SCSI ID. This value is maintained
since the SCSI Hardware Interface driver was loaded.
Parity errors may occasionally occur. If this value should rise
dramatically, you may have a problem. Some common causes include
radio frequency interference (RFI) on the bus cables, bad or
missing terminating resisters on the drives or having more than
one device with the same SCSI ID. Insure the bus cable is free
of obstructions and that the devices on the bus are properly
configured."
::= { cpqScsiTargetEntry 8 }
cpqScsiTargetPhaseErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Bus Phase Errors.
This is the number of times the SCSI bus entered an invalid
operating state while processing commands for the SCSI ID.
This value is maintained since the SCSI Hardware Interface driver
was loaded.
If you see any phase errors you may have a problem.
Phase errors can be caused by a device which is not operating
correctly. If the phase errors continue to increase the device
should be replaced."
::= { cpqScsiTargetEntry 9 }
cpqScsiTargetSelectTimeouts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Bus Select Time-outs.
This is the number of times the controller attempted to start
communications with a device by selecting it but the device did
not respond.
If you see any select time-outs you may have a problem. The device
may have hung during operations. The SCSI controller will attempt
to reset the device but if this value continues to increment you
may need to power cycle the device."
::= { cpqScsiTargetEntry 10 }
cpqScsiTargetMsgRejects OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Bus Message Rejects.
This is the number of times the device rejected a command because
it did not support the specified operation since the SCSI Hardware
Interface driver was loaded.
A large number for this object does not indicate a problem.
It only shows that the device does not support certain advanced
SCSI commands that the device driver issued."
::= { cpqScsiTargetEntry 11 }
cpqScsiTargetNegPeriod OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Negotiated Period.
This is the amount of time that was negotiated between the
controller and the device as a synchronous transfer window.
A synchronous transfer window is how long the device can
transfer data without requiring an acknowledgment from the
controller. In general the larger the negotiated period is,
the lower the device throughput. This value is reported in
quarters of nanoseconds."
::= { cpqScsiTargetEntry 12 }
cpqScsiTargetLocation OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
proliant(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Location.
This is the physical location of where the device is located.
The following values are defined:
other(1)
The device is not located in any special product that
identifies the location.
proliant(2)
The device is located in the ProLiant Storage System."
::= { cpqScsiTargetEntry 13 }
cpqScsiTargetNegSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Negotiated Speed.
This is the data transfer speed that was negotiated between
the controller and the device. This value is reported in bits
per second."
::= { cpqScsiTargetEntry 14 }
cpqScsiTargetPhysWidth OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
narrow(2),
wide16(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Data Bus Physical Width.
This is the physical width of the device`s SCSI data bus.
other(1)
The management agent does not recognize this width. You may
need to upgrade your software.
narrow(2)
The SCSI device supports an 8-bit narrow SCSI data bus.
wide16(3)
The SCSI device supports a 16-bit wide SCSI data bus."
::= { cpqScsiTargetEntry 15 }
cpqScsiTargetNegWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Data Bus Negotiated Width.
This is the width of the device`s SCSI data bus that was
negotiated between the controller and the device. This value
is reported in bits."
::= { cpqScsiTargetEntry 16 }
cpqScsiTargetTypeExtended OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
pdcd(2),
removableDisk(3),
dltAutoloader(4),
cdJukebox(5),
cr3500(6),
autoloader(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Extended Device Type.
This is additional information about the type of SCSI device.
The following types are defined:
other(1)
This target does not have any extended type information.
pdcd(2)
This is a power-drive CD-ROM.
removableDisk(3)
This is a removable media disk device like a floppy drive.
dltAutoloader(4)
This is a tape library device.
cdJukebox(5)
This is a CD storage system device.
cr3500(6)
This is a CR3500 RAID SCSI controller.
autoloader(7)
This is an autoloader medium changer device."
::= { cpqScsiTargetEntry 17 }
cpqScsiTargetCurrentSpeed OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
asynchronous(2),
fast(3),
ultra(4),
ultra2(5),
ultra3(6),
scsi1(7),
ultra4(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Device Current Data Transfer Speed.
The following values are defined:
other(1)
The agent is unable to determine the current negotiated data
transfer speed for this drive.
asynchronous(2)
The negotiated data transfer speed for this drive is
asynchronous.
fast(3)
The negotiated data transfer speed for this drive is 10 million
transfers per second.
ultra(4)
The negotiated data transfer speed for this drive is 20 million
transfers per second.
ultra2(5)
The negotiated data transfer speed for this drive is 40 million
transfers per second.
ultra3(6)
The negotiated data transfer speed for this drive is 80 million
transfers per second.
scsi1(7)
The negotiated data transfer speed for this drive is 5 million
transfers per second.
ultra4(8)
The negotiated data transfer speed for this drive is 160 million
transfers per second. Ultra4 is now referred to as Ultra320."
::= { cpqScsiTargetEntry 18 }
-- ****************************************************************************
-- SCSI CD Group
-- =================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiCd Group (1.3.6.1.4.1.232.5.2.6)
-- cpqScsiCdDrvTable (1.3.6.1.4.1.232.5.2.6.1)
--
-- The SCSI CD group describes the CD storage jukebox associated with
-- SCSI controllers and the CD_ROM devices in the jukebox.
--
-- Implementation of the CD group is mandatory for all agents supporting
-- the SCSI MIB.
--
-- ****************************************************************************
cpqScsiCdDrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqScsiCdDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Scsi CD-ROM Drive Table."
::= { cpqScsiCd 1 }
cpqScsiCdDrvEntry OBJECT-TYPE
SYNTAX CpqScsiCdDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Scsi CD-ROM Drive Entry."
INDEX { cpqScsiCdDrvCntlrIndex, cpqScsiCdDrvBusIndex,
cpqScsiCdDrvScsiIdIndex, cpqScsiCdDrvLunIndex }
::= { cpqScsiCdDrvTable 1 }
CpqScsiCdDrvEntry ::= SEQUENCE
{
cpqScsiCdDrvCntlrIndex INTEGER,
cpqScsiCdDrvBusIndex INTEGER,
cpqScsiCdDrvScsiIdIndex INTEGER,
cpqScsiCdDrvLunIndex INTEGER,
cpqScsiCdDrvModel DisplayString,
cpqScsiCdDrvVendor DisplayString,
cpqScsiCdDrvFwRev DisplayString
}
cpqScsiCdDrvCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD-ROM Drive Controller Index.
The controller index indicates to which SCSI adapter instance
this CD table entry belongs. The controller index is the
physical slot in the computer where the adapter is located."
::= { cpqScsiCdDrvEntry 1 }
cpqScsiCdDrvBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD-ROM Drive Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter this table entry belongs. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqScsiCdDrvEntry 2 }
cpqScsiCdDrvScsiIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD-ROM Drive Index.
The CD-ROM drive index indicates to which CD-ROM drive
instance on a SCSI bus this table entry belongs. The physical
drive index is the SCSI ID being used by that CD drive."
::= { cpqScsiCdDrvEntry 3 }
cpqScsiCdDrvLunIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD-ROM Drive Logical Unit Index.
The CD-ROM drive logical unit index indicates to which
physical drive logical unit on a SCSI ID instance on a SCSI
bus this table entry belongs. The CD-ROM drive Lun index
is the logical unit number being used by that CD drive."
::= { cpqScsiCdDrvEntry 4 }
cpqScsiCdDrvModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD Device Model.
This is a description of the device`s model as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqScsiCdDrvEntry 5 }
cpqScsiCdDrvVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD Drive Vendor.
This is the CD drive vendor`s name as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqScsiCdDrvEntry 6 }
cpqScsiCdDrvFwRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD-ROM Firmware Revision.
This is used to differentiate the firmware versions
which have the same CD-ROM drive vendor and model (as specified by
cpqScsiCdVendor and cpqScsiCdModel). This can be retrieved by the
SCSI inquiry command. "
::= { cpqScsiCdDrvEntry 7 }
-- ****************************************************************************
-- CD Library Table
-- ===================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiComponent Group (1.3.6.1.4.1.232.5.2)
-- cpqScsiCd Group (1.3.6.1.4.1.232.5.2.6)
-- cpqCdLibraryTable (1.3.6.1.4.1.232.5.2.6.2)
--
-- The CD Library Table describes the information about CD storage jukebox
-- associated with Conpaq SCSI controllers.
--
-- Implementation of the CD Library is mandatory for all agents supporting
-- the SCSI MIB.
--
-- ****************************************************************************
cpqCdLibraryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqCdLibraryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"CD Library Table."
::= { cpqScsiCd 2 }
cpqCdLibraryEntry OBJECT-TYPE
SYNTAX CpqCdLibraryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"CD Library Entry."
INDEX { cpqCdLibraryCntlrIndex, cpqCdLibraryBusIndex,
cpqCdLibraryScsiIdIndex, cpqCdLibraryLunIndex }
::= { cpqCdLibraryTable 1 }
CpqCdLibraryEntry ::= SEQUENCE
{
cpqCdLibraryCntlrIndex INTEGER,
cpqCdLibraryBusIndex INTEGER,
cpqCdLibraryScsiIdIndex INTEGER,
cpqCdLibraryLunIndex INTEGER,
cpqCdLibraryCondition INTEGER,
cpqCdLibraryStatus INTEGER,
cpqCdLibraryModel DisplayString,
cpqCdLibraryVendor DisplayString,
cpqCdLibrarySerialNumber DisplayString,
cpqCdLibraryDriveList OCTET STRING,
cpqCdLibraryFwRev DisplayString,
cpqCdLibraryFwSubtype INTEGER
}
cpqCdLibraryCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD Library Controller Index.
The controller index indicates to which SCSI adapter instance
this table entry belongs. The controller index is the physical
slot in the computer system where the adapter is located."
::= { cpqCdLibraryEntry 1 }
cpqCdLibraryBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD Library Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter card this table entry belongs. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqCdLibraryEntry 2 }
cpqCdLibraryScsiIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD Library Device Index.
The device index indicates to which device instance on a
SCSI bus this table entry belongs. The device index
is the SCSI ID being used by that device."
::= { cpqCdLibraryEntry 3 }
cpqCdLibraryLunIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD Library Logical Unit Index.
The logical unit index indicates to which Lun device instance
on a SCSI bus this table entry belongs. The logical unit
index is the Lun being used by that device."
::= { cpqCdLibraryEntry 4 }
cpqCdLibraryCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CD Library Condition.
This value represents the overall condition of this CD Library.
The library can be in one of the following states:
other(1)
The library is in a state other than one of those listed
below.
ok(2)
Indicates that the library is in normal operation mode.
No user action is necessary.
degraded(3)
Indicates that the library has degraded in some manner.
failed(4)
Indicates that the library has failed and can no longer
return data. When convenient, you should bring down the server
and run diagnostics to help identify the problem."
::= { cpqCdLibraryEntry 5 }
cpqCdLibraryStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
failed(3),
offline(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CD Library Status.
This value represents the status of this CD Library.
The library can be in one of the following states:
other(1)
The library is in a state other than one of those listed
below.
ok(2)
Indicates that the CD library fault light is in an `ok` state.
failed(3)
Indicates that the CD library fault light is in a `failed` state.
The fault light is activated for hardware errors (Sense Code 04h)
with additional Sense codes: 40h-4fh except the parity error.
The LED will remain on until is powered cycled.
offline(4)
Indicates that the agents can no longer communicate with
the CD library. This could be caused by a cabling problem or the
CD library may be powered off."
::= { cpqCdLibraryEntry 6 }
cpqCdLibraryModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD Library Device Model.
This is a description of the device`s model as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqCdLibraryEntry 7 }
cpqCdLibraryVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD Library Vendor.
This is the CD Library drive vendor`s name as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqCdLibraryEntry 8 }
cpqCdLibrarySerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CD Library Serial Number.
This is the unit serial number for the library. It
can be used for identification purposes."
::= { cpqCdLibraryEntry 9 }
cpqCdLibraryDriveList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CD Library Drive List
This is a data structure containing the list of CD drive ids
that are present in this library. The format is:
BYTE Controller Number
BYTE Bus Number
BYTE SCSI ID
BYTE Logical Unit Number
There will be 1 structure for each drive present in the library."
::= { cpqCdLibraryEntry 10 }
cpqCdLibraryFwRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD Library Firmware Revision.
This is used to differentiate the firmware versions
which have the same CD library vendor and model (as specified in
cpqCdLibraryVendor and cpqCdLibraryModel). This can be retrieved
by the SCSI inquiry command. "
::= { cpqCdLibraryEntry 11}
cpqCdLibraryFwSubtype OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI CD library Firmware Subtype.
This is used to differentiate the firmware versions
which have the same vendor and model. CD library will contain
a value of 1 for this variable when they first ship, and this value
will be incremented if future versions are shipped which
are not firmware compatible with the predecessor. If the
CD library does not support this capability, a value of 0
will be returned."
::= { cpqCdLibraryEntry 12 }
-- ****************************************************************************
-- SCSI Trap Log
-- =============
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiTrap (1.3.6.1.4.1.232.5.3) (deprecated)
--
-- The trap group maintains information about the number of traps issued
-- from the scsiDrv enterprise. The trap group also maintains a table of
-- the last several traps issued. This table is intended to give a
-- management application some recent status information immediately upon
-- accessing the agent.
--
-- Implementation of the Trap group is optional for agents that support the
-- SCSI MIB.
--
-- ****************************************************************************
cpqScsiTrapPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of trap packets issued by the SCSI
enterprise since the instrument agent was loaded."
::= { cpqScsiTrap 1 }
cpqScsiTrapLogMaxSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum number of entries that will currently be kept in
the trap log. If the maximum size has been reached and a new
trap occurs the oldest trap will be removed."
::= { cpqScsiTrap 2 }
-- ****************************************************************************
-- SCSI Trap Log
-- =============
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqScsi Group (1.3.6.1.4.1.232.5)
-- cpqScsiTrap (1.3.6.1.4.1.232.5.3) (deprecated)
-- cpqScsiTrapLogTable (1.3.6.1.4.1.232.5.3.3) (deprecated)
--
-- ****************************************************************************
cpqScsiTrapLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqScsiTrapLogEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An ordered list of trap log entries (conceptually a queue).
The trap log entries will be kept in the order in which they were
generated with the most recent trap at index 1 and the oldest
trap entry at index trapLogMaxSize. If the maximum number size
has been reached and a new trap occurs the oldest trap will be
removed when the new trap is added so the trapMaxLogSize is not
exceeded."
::= { cpqScsiTrap 3 }
cpqScsiTrapLogEntry OBJECT-TYPE
SYNTAX CpqScsiTrapLogEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A description of a trap event."
INDEX { cpqScsiTrapLogIndex }
::= { cpqScsiTrapLogTable 1 }
CpqScsiTrapLogEntry ::= SEQUENCE
{
cpqScsiTrapLogIndex INTEGER,
cpqScsiTrapType INTEGER,
cpqScsiTrapTime OCTET STRING
}
cpqScsiTrapLogIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of this object uniquely identifies this trapLogEntry
at this time. The most recent trap will have an index of 1 and
the oldest trap will have an index of trapLogMaxSize. Because of
the queue-like nature of the trapLog this particular trap event`s
index will change as new traps are issued."
::= { cpqScsiTrapLogEntry 1 }
cpqScsiTrapType OBJECT-TYPE
SYNTAX INTEGER {
cpqScsiCntlrStatusChange(1),
cpqScsiLogDrvStatusChange(2),
cpqScsiPhyDrvStatusChange(3),
cpqScsi2CntlrStatusChange(5001),
cpqScsi2LogDrvStatusChange(5002),
cpqScsi2PhyDrvStatusChange(5003)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of the trap event that this entry describes.
This number refers to an entry in a list of traps enumerating the
possible traps the SCSI agent may issue."
::= { cpqScsiTrapLogEntry 2 }
cpqScsiTrapTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time of the trap event that this entry describes.
The time is given in year (first octet), month, day of month,
hour, minute, second (last octet) order. Each octet gives the
value in Binary Coded Decimal (BCD)."
::= { cpqScsiTrapLogEntry 3 }
-- ****************************************************************************
-- SCSI Bus Group
-- ==============
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSbScsiBus Group (1.3.6.1.4.1.232.7) (deprecated)
-- cpqSbScsiMibRev Group (1.3.6.1.4.1.232.7.1) (deprecated)
-- cpqSbDevice Group (1.3.6.1.4.1.232.7.2) (deprecated)
--
-- The scsiBus Group contains a MIB Revision group that contains
-- information about the revision of this document to which an
-- agent conforms. The scsiBus Group contains component child groups
-- that contains information describing the parts of the SCSI subsystems
-- in this machine.
--
-- The status of this group has been changed to deprecated. All useful
-- Information in this group can also be found in the cpqScsiTarget group.
-- Support of this group is optional for agents implementing the SCSI MIB.
-- This group should only be implemented if compatibility with older versions
-- of Insight Manager version 1.x is required.
--
--
-- An Insight Agent conforming to this document will return a mibRevMajor
-- of one and a mibRevMinor of zero.
--
--
-- The status of this group has been changed to deprecated. All useful
-- Information in this group can also be found in the cpqScsiTarget group.
-- Support of this group is optional for agents implementing the SCSI MIB.
-- This group should only be implemented if compatibility with older versions
-- of Insight Manager version 1.x is desired.
--
-- ****************************************************************************
cpqSbMibRevMajor OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Major Revision level. A change in the major revision level
represents a major change in the architecture of the MIB. A
change in the major revision level may indicate a significant
change in the information supported and/or the meaning of the
supported information, correct interpretation of data may require
a MIB document with the same major revision level."
::= { cpqSbScsiMibRev 1 }
cpqSbMibRevMinor OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Minor Revision level. A change in the minor revision level
may represent some minor additional support; no changes to any
pre-existing information has occurred."
::= { cpqSbScsiMibRev 2 }
-- ****************************************************************************
-- The SCSI Device Group (Deprecated)
-- ****************************************************************************
--
-- The SCSI Device group describes the devices on the SCSI buses in the
-- system.
--
-- Implementation of the SCSI Device group is mandatory for all agents
-- supporting the SCSI Drive MIB.
--
--
-- The status of this group has been changed to deprecated. All useful
-- Information in this group can also be found in the cpqScsiTarget group.
-- Support of this group is optional for agents implementing the SCSI MIB.
-- This group should only be implemented if compatibility with older versions
-- of Insight Manager version 1.x is desired.
cpqSbDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSbDeviceEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"SCSI Drive Bus Table"
::= { cpqSbDevice 2 }
cpqSbDeviceEntry OBJECT-TYPE
SYNTAX CpqSbDeviceEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"SCSI Drive Bus Entry"
INDEX { cpqSbDevCntlrIndex, cpqSbDevBusIndex, cpqSbDevScsiIdIndex }
::= { cpqSbDeviceTable 1 }
CpqSbDeviceEntry ::= SEQUENCE
{
cpqSbDevCntlrIndex INTEGER,
cpqSbDevBusIndex INTEGER,
cpqSbDevScsiIdIndex INTEGER,
cpqSbDevType INTEGER,
cpqSbDevModel DisplayString,
cpqSbDevFWRev DisplayString,
cpqSbDevVendor DisplayString,
cpqSbDevParityErrs Counter,
cpqSbDevPhaseErrs Counter,
cpqSbDevSelectTimeouts Counter,
cpqSbDevMsgRejects Counter,
cpqSbDevNegPeriod INTEGER,
cpqSbDevLocation INTEGER
}
cpqSbDevCntlrIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Bus Controller Index
The controller index indicates which SCSI adapter card instance
this table entry belongs to. The controller index is the physical
slot in the computer system where the adapter card is located."
::= { cpqSbDeviceEntry 1 }
cpqSbDevBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Bus Index
The bus index indicates which SCSI bus instance on an
adapter card this table entry belongs to. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqSbDeviceEntry 2 }
cpqSbDevScsiIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Bus Physical Drive Index
The physical drive index indicates which physical drive instance
on a SCSI bus this table entry belongs to. The physical drive
index is the SCSI ID being used by that device."
::= { cpqSbDeviceEntry 3 }
cpqSbDevType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
disk(2),
tape(3),
printer(4),
processor(5),
wormDrive(6),
cd-rom(7),
scanner(8),
optical(9),
jukeBox(10),
commDev(11)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Type
This is the type of SCSI device. The following types are defined:
other(1)
The management agent does not recognize this type. You may
need to upgrade you software.
disk(2)
This is a direct-access device like a disk drive.
tape(3)
This is a sequential-access device like a tape drive.
printer(4)
This is a printer device.
processor(5)
This is a processor device like the ProLiant Storage System.
worm(6)
This is a write-once, read-many times device.
cd-rom(7)
This is a CD-ROM, read-only device.
scanner(8)
This is a scanner device.
optical(9)
This is an optical memory device.
jukeBox(10)
This is a medium changer device like a jukebox.
commDev(11)
This is a communications device like a LAN bridge."
::= { cpqSbDeviceEntry 4 }
cpqSbDevModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Model
This is a description of the physical drive`s model as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqSbDeviceEntry 5 }
cpqSbDevFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Firmware Revision
This is the revision level of the physical drive as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqSbDeviceEntry 6 }
cpqSbDevVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Vendor.
This is the physical drive vendor`s name as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqSbDeviceEntry 7 }
cpqSbDevParityErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Bus Parity Errors
This is the number of parity errors seen on the SCSI bus while
processing commands for this SCSI ID since the SCSI Interface
Module was loaded.
Parity errors may occasionally occur. If this value should rise
dramatically, you may have a problem. Some common causes include
radio frequency interference (RFI) on the bus cables, bad or missing
terminating resisters on the drives or having more than one device
with the same SCSI ID. Insure the bus cable is free of obstructions
and that the devices on the bus are properly configured."
::= { cpqSbDeviceEntry 8 }
cpqSbDevPhaseErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Bus Phase Errors
This is the number of times the SCSI bus entered an invalid operating
state while processing commands for the SCSI ID since the SCSI
Hardware Interface driver was loaded.
If you see any phase errors you may have a problem. Phase errors can
be caused by a device which is not operating correctly. If the phase
errors continue to increase the device should be replaced."
::= { cpqSbDeviceEntry 9 }
cpqSbDevSelectTimeouts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Bus Select Time-outs
This is the number of times the controller attempted to start
communications with a device by selecting it but the device did not
respond.
If you see any select time-outs you may have a problem. The device
may have hung during operations. The SCSI controller will attempt to
reset the device but if this value continues to increment you may
need to power cycle the device."
::= { cpqSbDeviceEntry 10 }
cpqSbDevMsgRejects OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Bus Message Rejects
This is the number of times the device rejected a command because
it did not support the specified operation since the SCSI Hardware
Interface driver was loaded.
A large number for this object does not indicate a problem. It
only shows that the device does not support certain advanced SCSI
commands that the device driver issued."
::= { cpqSbDeviceEntry 11 }
cpqSbDevNegPeriod OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Negotiated Period
This is the amount of time that was negotiated between the controller
and the device as a synchronous transfer window. A synchronous
transfer window is how long the device can transfer data without
requiring an acknowledgment from the controller. In general the
larger the negotiated period is, the higher the device throughput."
::= { cpqSbDeviceEntry 12 }
cpqSbDevLocation OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
proliant(2)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"SCSI Device Location
This is the physical location of where the device is located. The
following values are defined:
other(1) The drives are not located in any special product that
identifies the location.
proliant(2) The drives are located in the ProLiant Storage System."
::= { cpqSbDeviceEntry 13 }
-- ****************************************************************************
-- Tape Physical Drive Group
-- =========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqTape Group (1.3.6.1.4.1.232.5)
-- cpqTapeComponent Group (1.3.6.1.4.1.232.5.4)
-- cpqTapePhyDrv Group (1.3.6.1.4.1.232.5.4.1)
-- cpqTapePhyDrvTable (1.3.6.1.4.1.232.5.4.1.1)
--
-- The PhyDrv group contains configuration about the physical drives
-- associated with tape backup products.
--
-- Implementation of the PhyDrv group is mandatory for all agents that
-- support the Tape MIB.
--
-- ****************************************************************************
cpqTapePhyDrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqTapePhyDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Table."
::= { cpqTapePhyDrv 1 }
cpqTapePhyDrvEntry OBJECT-TYPE
SYNTAX CpqTapePhyDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Entry."
INDEX { cpqTapePhyDrvCntlrIndex, cpqTapePhyDrvBusIndex,
cpqTapePhyDrvScsiIdIndex, cpqTapePhyDrvLunIndex }
::= { cpqTapePhyDrvTable 1 }
CpqTapePhyDrvEntry ::= SEQUENCE
{
cpqTapePhyDrvCntlrIndex INTEGER,
cpqTapePhyDrvBusIndex INTEGER,
cpqTapePhyDrvScsiIdIndex INTEGER,
cpqTapePhyDrvLunIndex INTEGER,
cpqTapePhyDrvType INTEGER,
cpqTapePhyDrvCondition INTEGER,
cpqTapePhyDrvMagSize INTEGER,
cpqTapePhyDrvSerialNumber DisplayString,
cpqTapePhyDrvCleanReq INTEGER,
cpqTapePhyDrvCleanTapeRepl INTEGER,
cpqTapePhyDrvFwSubtype INTEGER,
cpqTapePhyDrvName DisplayString,
cpqTapePhyDrvCleanTapeCount INTEGER,
cpqTapePhyDrvFwRev DisplayString,
cpqTapePhyDrvStatus INTEGER,
cpqTapePhyDrvHotPlug INTEGER,
cpqTapePhyDrvPlacement INTEGER,
cpqTapePhyDrvLibraryDrive INTEGER,
cpqTapePhyDrvLoaderName DisplayString,
cpqTapePhyDrvLoaderFwRev DisplayString,
cpqTapePhyDrvLoaderSerialNum DisplayString
}
cpqTapePhyDrvCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Controller Index.
The controller index indicates to which SCSI adapter instance
this tape table entry belongs. The controller index is the
physical slot in the computer where the adapter is located."
::= { cpqTapePhyDrvEntry 1 }
cpqTapePhyDrvBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter this table entry belongs. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqTapePhyDrvEntry 2 }
cpqTapePhyDrvScsiIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Index.
The physical drive index indicates to which physical drive
instance on a SCSI bus this table entry belongs. The physical
drive index is the SCSI ID being used by that tape drive."
::= { cpqTapePhyDrvEntry 3 }
cpqTapePhyDrvLunIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Logical Unit Index.
The physical drive logical unit index indicates to which
physical drive logical unit on a SCSI ID instance on a SCSI
bus this table entry belongs. The physical drive Lun index
is the logical unit number being used by that tape drive."
::= { cpqTapePhyDrvEntry 4 }
cpqTapePhyDrvType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
cpqDat4-16(2),
cpqDatAuto(3),
cpqDat2-8(4),
cpqDlt10-20(5),
cpqDlt20-40(6),
cpqDlt15-30(7),
cpqDlt35-70(8),
cpqDat4-8(9),
cpqSlr4-8(10),
cpqDat12-24(11),
cpqDatAuto12-24(12),
cpqMlr16-32(13),
cpqAit35(14),
cpqAit50(15),
cpqDat20-40(16),
cpqDlt40-80(17),
cpqDatAuto20-40(18),
cpqSuperDlt1(19),
cpqAit35Lvd(20),
cpqCompaq(21)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Type.
This is the drives model, and can be used for identification
purposes. The following values are defined:
other(1)
The management agent does not recognize this model.
You may need to upgrade your software.
cpqDat4-16(2)
Compaq 4/8-Gigabyte TurboDAT Drive.
cpqDatAuto(3)
Compaq TurboDAT Autoloader.
cpqDat2-8(4)
Compaq 2/8-Gigabyte TurboDAT Drive.
cpqDlt10-20(5)
Compaq 10/20-GB DLT Drive.
cpqDlt20-40(6)
Compaq 20/40-GB DLT Drive.
cpqDlt15-30(7)
Compaq 15/30-GB DLT Drive.
cpqDlt35-70(8)
Compaq 35/70-GB DLT Drive.
cpqDat4-8(9)
Compaq 4/8-GB DAT Drive.
cpqSlr4-8(10)
Compaq 4/8-GB SLR Drive.
cpqDat12-24(11)
Compaq 12/24-GB DAT Drive.
cpqDatAuto12-24(12)
Compaq 12/24-GB DAT Autoloader.
cpqMlr16-32(13)
Compaq 16/32-GB MLR Drive.
cpqAit35(14)
Compaq AIT 35GB Drive.
cpqAit50(15)
Compaq AIT 50GB Drive.
cpqDat20-40(16)
Compaq 20/40GB DAT Drive.
cpqDlt40-80(17)
Compaq 40/80GB DLT Drive.
cpqDatAuto20-40(18)
Compaq 20/40GB DAT Autoloader.
cpqSuperDlt1(19)
Compaq 100GB Super DLT Drive.
cpqAit35Lvd(20)
Compaq AIT 35 LVD Drive.
cpqCompaq(21)
Supported Tape Drive."
::= { cpqTapePhyDrvEntry 5 }
cpqTapePhyDrvCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Status.
The physical drive can be in one of the following states:
other(1)
The drive is in a state other than one of those listed
below.
ok(2)
Indicates that the physical drive is in normal operation mode.
No user action is necessary.
degraded(3)
Indicates that the physical drive has degraded in some manner.
failed(4)
Indicates that the physical drive has failed and can no longer
return data. When convenient, you should bring down the server
and run diagnostics to help identify the problem.
The drive may need to be replaced."
::= { cpqTapePhyDrvEntry 6 }
cpqTapePhyDrvMagSize OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Magazine Size.
The number of tape slots available in the magazine cartridge
that is currently loaded into the tape drive.
For non-autoloader devices, this value will be 1."
::= { cpqTapePhyDrvEntry 7 }
cpqTapePhyDrvSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Serial Number.
This is the unit serial number for the tape drive. It
can be used for identification purposes."
::= { cpqTapePhyDrvEntry 8 }
cpqTapePhyDrvCleanReq OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
true(2),
false(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Cleaning Required Status.
This is an indication of whether the tape drive heads
require a cleaning session to occur. If this variable
indicates a need to clean the tape heads, then a cleaning
tape will need to be inserted and run through a cleaning
cycle.
This variable can be in one of the following states:
other(1)
The tape drive does not support monitoring of the cleaning
required status.
true(2)
The tape drive requires a cleaning tape session in order
to clean the heads.
false(3)
The tape drive does not require any cleaning tape session."
::= { cpqTapePhyDrvEntry 9 }
cpqTapePhyDrvCleanTapeRepl OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
true(2),
false(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Cleaning Tape Replacement Status.
This variable is only applicable to autoloader tape drives.
This variable indicates whether the cleaning tape which is
inserted in an autoloader needs to be replaced because its
cleaning capability is exhausted (it is at end of tape).
This variable can be in one of the following states:
other(1)
The tape drive does not support monitoring of the cleaning
tape replacement status.
true(2)
The autoloader tape drive requires a new cleaning tape to
be inserted.
false(3)
The tape drive does not require a new cleaning tape."
::= { cpqTapePhyDrvEntry 10 }
cpqTapePhyDrvFwSubtype OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Firmware Subtype.
This is used to differentiate the firmware versions
which have the same tape drive type (as specified by
cpqTapePhyDrvType). Tape drives will contain a value
of 1 for this variable when they first ship, and this value
will be incremented if future versions are shipped which
are not firmware compatible with the predecessor. If the
tape drive does not support this capability, a value of 0
will be returned."
::= { cpqTapePhyDrvEntry 11 }
cpqTapePhyDrvName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Name.
This is a combination of the vendor ID and the product ID as
returned by the SCSI inquiry command. This can be used for
identification purposes."
::= { cpqTapePhyDrvEntry 12 }
cpqTapePhyDrvCleanTapeCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Cleaning Tape Count.
This variable is only applicable to autoloader tape drives.
This variable is a count from a tape drive of the number of
cleanings done by the tape cleaner last in the drive."
::= { cpqTapePhyDrvEntry 13 }
cpqTapePhyDrvFwRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Firmware Revision.
This is the revision level of the physical drive as returned by
the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqTapePhyDrvEntry 14 }
cpqTapePhyDrvStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
failed(4),
offline(5),
missingWasOk(6),
missingWasFailed(7),
missingWasOffline(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Status.
The tape physical drive can be in one of the following states:
other(1)
The tape drive is in a state other than one of those listed
below.
ok(2)
Indicates that the tape physical drive is in normal operation
mode. No user action is necessary.
failed(4)
Indicates that the tape physical drive has failed and can no
longer return data. The drive may need to be replaced.
offline(5)
Indicates that the tape physical drive is offline and can no
longer return data. No further status is available.
missingWasOk(6)
Indicates that a tape physical drive had a status of OK and
is no longer present. The drive has been removed.
missingWasFailed(7)
Indicates that a tape physical drive had a status of FAILED
and is no longer present. The drive has been removed.
missingWasOffline(8)
Indicates that a tape physical drive had a status of OFFLINE
and is no longer present. The drive has been removed."
::= { cpqTapePhyDrvEntry 15 }
cpqTapePhyDrvHotPlug OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hotPlug(2),
nonHotPlug(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Hot Plug Support Status.
The following values are defined:
other(1)
The agent is unable to determine if this drive
supports hot plug replacement.
hotPlug(2)
The drive supports hot plug replacement.
nonhotPlug(3)
The drive does not support hot plug replacement."
::= { cpqTapePhyDrvEntry 16 }
cpqTapePhyDrvPlacement OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
internal(2),
external(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Placement.
The following values are defined:
other(1)
The agent is unable to determine if the tape drive is
internal or external to the system chassis.
internal(2)
The tape drive is located in an internal Proliant system
chassis.
external(3)
The tape drive is located in an external Proliant storage
system."
::= { cpqTapePhyDrvEntry 17 }
cpqTapePhyDrvLibraryDrive OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
true(2),
false(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Library Drive.
This variable indicates whether or not the tape drive is part
of a tape library. It can be in one of the following states:
other(1)
Indicates that the storage agents cannot determine if the
tape drive is part of a tape library.
true(2)
The tape drive is part of a tape library.
false(3)
The tape drive is not part of a tape library."
::= { cpqTapePhyDrvEntry 18 }
cpqTapePhyDrvLoaderName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Autoloader Name.
This is a combination of the vendor ID and the product ID as
returned by the SCSI inquiry command. This can be used for
identification purposes."
::= { cpqTapePhyDrvEntry 19 }
cpqTapePhyDrvLoaderFwRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Autoloader Firmware Revision.
This is the firmware revision level of the autoloader as returned
by the SCSI inquiry command. This can be used for identification
purposes."
::= { cpqTapePhyDrvEntry 20 }
cpqTapePhyDrvLoaderSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Autoloader Serial Number.
This is the autoloader serial number. It can be used for
identification purposes."
::= { cpqTapePhyDrvEntry 21 }
-- ****************************************************************************
-- Tape Counters Group
-- ===================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqTape Group (1.3.6.1.4.1.232.5)
-- cpqTapeComponent Group (1.3.6.1.4.1.232.5.4)
-- cpqTapeCounters Group (1.3.6.1.4.1.232.5.4.2)
-- cpqTapeCountersTable (1.3.6.1.4.1.232.5.4.2.1)
--
-- The Tape counters group describes the tape device error information about
-- the Tape bus targets (devices) in the system.
--
-- Implementation of the Tape counters group is mandatory for all agents
-- supporting the Tape MIB.
--
-- ****************************************************************************
cpqTapeCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqTapeCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Tape Counters Table."
::= { cpqTapeCounters 1 }
cpqTapeCountersEntry OBJECT-TYPE
SYNTAX CpqTapeCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Tape Counters Entry."
INDEX { cpqTapeCountersCntlrIndex, cpqTapeCountersBusIndex,
cpqTapeCountersScsiIdIndex, cpqTapeCountersLunIndex }
::= { cpqTapeCountersTable 1 }
CpqTapeCountersEntry ::= SEQUENCE
{
cpqTapeCountersCntlrIndex INTEGER,
cpqTapeCountersBusIndex INTEGER,
cpqTapeCountersScsiIdIndex INTEGER,
cpqTapeCountersLunIndex INTEGER,
cpqTapeCountersReWrites Counter,
cpqTapeCountersReReads Counter,
cpqTapeCountersTotalErrors Counter,
cpqTapeCountersTotalUncorrectable Counter,
cpqTapeCountersTotalBytes Counter
}
cpqTapeCountersCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Counters Controller Index.
The controller index indicates to which SCSI adapter instance
this table entry belongs. The controller index is the physical
slot in the computer system where the adapter is located."
::= { cpqTapeCountersEntry 1 }
cpqTapeCountersBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Counters Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter card this table entry belongs. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqTapeCountersEntry 2 }
cpqTapeCountersScsiIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Counters Device Index.
The device index indicates to which device instance on a
SCSI bus this table entry belongs. The device index
is the SCSI ID being used by that device."
::= { cpqTapeCountersEntry 3 }
cpqTapeCountersLunIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Counters Logical Unit Index.
The logical unit index indicates to which Lun device instance
on a SCSI bus this table entry belongs. The logical unit
index is the Lun being used by that device."
::= { cpqTapeCountersEntry 4 }
cpqTapeCountersReWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Re-write count.
This is the number of times blocks had to be re-written to the
device. This value is maintained since the Tape Hardware Interface
driver was loaded.
Re-write errors may occasionally occur. If this value should rise
dramatically, you may need to clean the device. If you continue
to have re-writes, you may have a problem. Some common causes
include radio frequency interference (RFI) on the bus cables,
bad or missing terminating resisters on the drives or having more
than one device with the same SCSI ID. Insure the bus cable is
free of obstructions and that the devices on the bus are properly
configured."
::= { cpqTapeCountersEntry 5 }
cpqTapeCountersReReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Re-read count.
This is the number of times blocks had to be re-read from the
device. This value is maintained since the Tape Hardware Interface
driver was loaded.
Re-read errors may occasionally occur. If this value should rise
dramatically, you may need to clean the device. If you continue
to have re-reads, you may have a problem. Some common causes
include radio frequency interference (RFI) on the bus cables,
bad or missing terminating resisters on the drives or having more
than one device with the same SCSI ID. Insure the bus cable is
free of obstructions and that the devices on the bus are properly
configured."
::= { cpqTapeCountersEntry 6 }
cpqTapeCountersTotalErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Total Errors.
This is the total number of read/write errors encountered.
This value is maintained since the Tape Hardware Interface
driver was loaded.
Errors may occasionally occur. If this value should rise
dramatically, you may need to clean the device. If you continue
to have errors, you may have a problem. Some common causes include
radio frequency interference (RFI) on the bus cables, bad or
missing terminating resisters on the drives or having more than
one device with the same SCSI ID. Insure the bus cable is free
of obstructions and that the devices on the bus are properly
configured."
::= { cpqTapeCountersEntry 7 }
cpqTapeCountersTotalUncorrectable OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Total Uncorrectable Errors.
This is the total number of read and write errors which could not
be corrected. This value is maintained since the Tape Hardware
Interface driver was loaded.
Errors may occasionally occur. If this value should rise
dramatically, you may need to clean the device. If you continue
to have errors, you may have a problem. Some common causes include
radio frequency interference (RFI) on the bus cables, bad or
missing terminating resisters on the drives or having more than
one device with the same SCSI ID. Insure the bus cable is free
of obstructions and that the devices on the bus are properly
configured."
::= { cpqTapeCountersEntry 8 }
cpqTapeCountersTotalBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Total Bytes.
This is the number total number of bytes read/written to the tape
currently installed in the device. This value is reset whenever
a new tape is inserted into the device."
::= { cpqTapeCountersEntry 9 }
-- ****************************************************************************
-- Tape Library Group
-- ===================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqTape Group (1.3.6.1.4.1.232.5)
-- cpqTapeComponent Group (1.3.6.1.4.1.232.5.4)
-- cpqTapeLibrary Group (1.3.6.1.4.1.232.5.4.3)
-- cpqTapeLibraryTable (1.3.6.1.4.1.232.5.4.3.1)
--
-- The Tape library group describes the tape autoloader devices and information about
-- the Tape bus targets (devices) in the autoloader.
--
-- Implementation of the Tape library group is mandatory for all agents
-- supporting the Tape Group.
--
-- ****************************************************************************
cpqTapeLibraryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqTapeLibraryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Tape Library Table."
::= { cpqTapeLibrary 1 }
cpqTapeLibraryEntry OBJECT-TYPE
SYNTAX CpqTapeLibraryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Tape Library Entry."
INDEX { cpqTapeLibraryCntlrIndex, cpqTapeLibraryBusIndex,
cpqTapeLibraryScsiIdIndex, cpqTapeLibraryLunIndex }
::= { cpqTapeLibraryTable 1 }
CpqTapeLibraryEntry ::= SEQUENCE
{
cpqTapeLibraryCntlrIndex INTEGER,
cpqTapeLibraryBusIndex INTEGER,
cpqTapeLibraryScsiIdIndex INTEGER,
cpqTapeLibraryLunIndex INTEGER,
cpqTapeLibraryCondition INTEGER,
cpqTapeLibraryStatus INTEGER,
cpqTapeLibraryDoorStatus INTEGER,
cpqTapeLibraryStatHours Counter,
cpqTapeLibraryStatMoves Counter,
cpqTapeLibraryName DisplayString,
cpqTapeLibrarySerialNumber DisplayString,
cpqTapeLibraryDriveList OCTET STRING,
cpqTapeLibraryState INTEGER,
cpqTapeLibraryTemperature INTEGER,
cpqTapeLibraryRedundancy INTEGER,
cpqTapeLibraryHotSwap INTEGER,
cpqTapeLibraryFwRev DisplayString,
cpqTapeLibraryTapeList OCTET STRING
}
cpqTapeLibraryCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Library Controller Index.
The controller index indicates to which SCSI adapter instance
this table entry belongs. The controller index is the physical
slot in the computer system where the adapter is located."
::= { cpqTapeLibraryEntry 1 }
cpqTapeLibraryBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Library Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter card this table entry belongs. The instances start
at one and increment for each SCSI bus on a card."
::= { cpqTapeLibraryEntry 2 }
cpqTapeLibraryScsiIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Library Device Index.
The device index indicates to which device instance on a
SCSI bus this table entry belongs. The device index
is the SCSI ID being used by that device."
::= { cpqTapeLibraryEntry 3 }
cpqTapeLibraryLunIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Library Logical Unit Index.
The logical unit index indicates to which Lun device instance
on a SCSI bus this table entry belongs. The logical unit
index is the Lun being used by that device."
::= { cpqTapeLibraryEntry 4 }
cpqTapeLibraryCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Library Status.
The library can be in one of the following states:
other(1)
The library is in a state other than one of those listed
below.
ok(2)
Indicates that the library is in normal operation mode.
No user action is necessary.
degraded(3)
Indicates that the library has degraded in some manner.
failed(4)
Indicates that the library has failed and can no longer
return data. When convenient, you should bring down the server
and run diagnostics to help identify the problem.
The library may need to be replaced."
::= { cpqTapeLibraryEntry 5 }
cpqTapeLibraryStatus OBJECT-TYPE
SYNTAX INTEGER (0..64535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Error code returned by the last library error."
::= { cpqTapeLibraryEntry 6 }
cpqTapeLibraryDoorStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
closed(2),
open(3),
notSupported(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the library door.
The door can be in one of the following states:
other(1)
The door is in a state other than one of those listed
below.
closed(2)
The door is closed.
open(3)
The door is open.
notSupported(4)
The door status is not supported by the device."
::= { cpqTapeLibraryEntry 7 }
cpqTapeLibraryStatHours OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hours of operation for the library."
::= { cpqTapeLibraryEntry 8 }
cpqTapeLibraryStatMoves OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of tape moves for the library loader arm."
::= { cpqTapeLibraryEntry 9 }
cpqTapeLibraryName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Library Name."
::= { cpqTapeLibraryEntry 10 }
cpqTapeLibrarySerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Library Serial Number.
This is the unit serial number for the library. It
can be used for identification purposes."
::= { cpqTapeLibraryEntry 11 }
cpqTapeLibraryDriveList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..320))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Tape Library Drive List
This is a data structure containing the list of tape drive ids
that are present in this library. The format is:
BYTE Controller Number
BYTE Bus Number
BYTE SCSI ID
BYTE Logical Unit Number
There will be 1 structure for each drive present in the library."
::= { cpqTapeLibraryEntry 12 }
cpqTapeLibraryState OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4),
offline(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Library Status.
The library can be in one of the following states:
other(1)
The library is in a state other than one of those listed
below.
ok(2)
Indicates that the library is in normal operation mode.
No user action is necessary.
degraded(3)
Indicates that the library has degraded in some manner.
failed(4)
Indicates that the library has failed and can no longer
return data. When convenient, you should bring down the server
and run diagnostics to help identify the problem.
The library may need to be replaced.
offline(5)
Indicates that the agents can no longer communicate with
the library. This could be caused by a cabling problem or the
library may be powered off."
::= { cpqTapeLibraryEntry 13 }
cpqTapeLibraryTemperature OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
ok(3),
safeTempExceeded(4),
maxTempExceeded(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Library Temperature Status.
The library temperature can be in one of the following states:
other(1)
The library temperature status is unknown.
notSupported(2)
Indicates that the library cannot detect or report temperature.
ok(3)
Indicates that the temperature of the library is within normal
operating limits.
safeTempExceeded(4)
Indicates that the temperature of the library has exceeded the
safe operational temperature. The library will continue to
operate under this warning.
maxTempExceeded(5)
Indicates that the temperature of the library has exceeded
normal operating limits to the extent that the library may
no longer function."
::= { cpqTapeLibraryEntry 14 }
cpqTapeLibraryRedundancy OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
capable(3),
notCapable(4),
active(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Library Redundancy Status.
Redundancy status denotes the presence of internal redundant
components such as fans, power supplies, etc. The library
redundancy can be in one of the following states:
other(1)
The library redundancy status is unknown.
notSupported(2)
Indicates that the library cannot detect or report redundancy
status.
capable(3)
Indicates that the library is capable of detecting and reporting
redundant components but there are not enough redundant units
installed to make redundancy active.
notCapable(4)
Indicates that the library is capable of detecting and reporting
redundant components but there are no components that support
redundancy.
active(5)
Indicates that the library is capable of detecting and reporting
redundant components, there are enough redundant units installed,
and redundancy is active."
::= { cpqTapeLibraryEntry 15 }
cpqTapeLibraryHotSwap OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
capable(3),
notCapable(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Library Hot Swap Status.
Hot swap status denotes the presence of hot swappable internal
components such as drives, fans, power supplies, etc. The library
hot swap status can be in one of the following states:
other(1)
The library hot swap status is unknown.
notSupported(2)
Indicates that the library cannot detect or report hot swap
status.
capable(3)
Indicates that the library is capable of detecting and reporting
hot swappable internal components and has at least one hot
swappable component.
notCapable(4)
Indicates that the library is capable of detecting and reporting
hot swappable internal components but there are no hot swappable
components installed."
::= { cpqTapeLibraryEntry 16 }
cpqTapeLibraryFwRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Library Firmware Revision.
This is the revision level of the tape library firmware as
returned by the SCSI inquiry command. This can be used for
identification purposes."
::= { cpqTapeLibraryEntry 17 }
cpqTapeLibraryTapeList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..560))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Library Drive List
This is a data structure containing the list of tape drive ids
that are present in this library. The format is:
ULONG Controller Number
BYTE Bus Number
BYTE SCSI ID
BYTE Logical Unit Number
There will be 1 structure for each drive present in the library."
::= { cpqTapeLibraryEntry 18 }
-- ****************************************************************************
-- SAS Host Bus Adapter Group
-- ==========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSas Group (1.3.6.1.4.1.232.5)
-- cpqSasComponent Group (1.3.6.1.4.1.232.5.5)
-- cpqSasHba Group (1.3.6.1.4.1.232.5.5.1)
-- cpqSasHbaTable (1.3.6.1.4.1.232.5.5.1.1)
--
--
-- The SAS host bus adapter group contains configuration and statistical
-- information for the SAS HBA.
--
-- Implementation of the SAS host bus adapter group is mandatory for all
-- agents that support the SCSI MIB.
--
-- ****************************************************************************
cpqSasHbaTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSasHbaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SAS Host Bus Adapter Table."
::= { cpqSasHba 1 }
cpqSasHbaEntry OBJECT-TYPE
SYNTAX CpqSasHbaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SAS Controller Table Entry."
INDEX { cpqSasHbaIndex }
::= { cpqSasHbaTable 1 }
CpqSasHbaEntry ::= SEQUENCE
{
cpqSasHbaIndex INTEGER,
cpqSasHbaHwLocation DisplayString,
cpqSasHbaModel INTEGER,
cpqSasHbaStatus INTEGER,
cpqSasHbaCondition INTEGER,
cpqSasHbaOverallCondition INTEGER,
cpqSasHbaSerialNumber DisplayString,
cpqSasHbaFwVersion DisplayString,
cpqSasHbaBiosVersion DisplayString,
cpqSasHbaPciLocation DisplayString
}
cpqSasHbaIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Host Bus Adapter Index.
The HBA index indicates to which SAS adapter instance this table
entry belongs."
::= { cpqSasHbaEntry 1 }
cpqSasHbaHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"SAS Host Bus Adapter Hardware Location.
A text description of the hardware location of the HBA.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqSasHbaEntry 2 }
cpqSasHbaModel OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
generic(2),
sas8int(3),
sas4int(4),
sasSc44Ge(5),
sasSc40Ge(6),
sasSc08Ge(7),
sasSc08e(8),
sasH220i(9),
sasH221(10),
sasH210i(11),
sasH220(12),
sasH222(13),
sasP824ip(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Host Bus Adapter Model.
This is the HBA model and can be used for identification
purposes. The following values are defined:
other(1) The management agent does not recognize this model.
You may need to upgrade your software.
generic(2) SAS HBA
sas8int(3) HP 8 Internal Port SAS HBA with RAID
sas4int(4) HP 4 Internal Port SAS HBA with RAID
sasSc44Ge(5) HP SC44Ge Host Bus Adapter
sasSc40Ge(6) HP SC40Ge HBA
sasSc08Ge(7) HP SC08Ge Host Bus Adapter
sasSc08e(8) HP SC08e Host Bus Adapter
sasH220i(9) HP H220i Host Bus Adapter
sasH221(10) HP H221 Host Bus Adapter
sasH210i(11) HP H210i Host Bus Adapter
sasH220(12) HP H220 Host Bus Adapter
sasH222(13) HP H222 Host Bus Adapter"
::= { cpqSasHbaEntry 3 }
cpqSasHbaStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
failed(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Host Bus Adapter Status.
This is the current status of the HBA. The following values are
currently defined:
other(1)
The management agent does not recognize the status as one of
those listed below.
ok(2)
The HBA is operating normally.
failed(3)
The HBA has failed and is no longer operating."
::= { cpqSasHbaEntry 4 }
cpqSasHbaCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Host Bus Adapter Condition.
This is the condition of the HBA hardware."
::= { cpqSasHbaEntry 5 }
cpqSasHbaOverallCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Host Bus Adapter Overall Condition.
This is the overall condition of the HBA and all of the logical
drives and physical drives controlled by it."
::= { cpqSasHbaEntry 6 }
cpqSasHbaSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Host Bus Adapter Serial Number.
This is the serial number assigned to the HBA. This can be used
for identification purposes. This field will be a null (size 0)
string if the management agent cannot provide the serial number."
::= { cpqSasHbaEntry 7 }
cpqSasHbaFwVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Host Bus Adapter Firmware Version.
This is the version of the firmware on the SAS HBA.
This field will be a null (size 0) string if the management
agent cannot provide the BIOS version."
::= { cpqSasHbaEntry 8 }
cpqSasHbaBiosVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Host Bus Adapter BIOS Version.
This is the version of the BIOS on the SAS HBA.
This field will be a null (size 0) string if the management
agent cannot provide the BIOS version."
::= { cpqSasHbaEntry 9 }
cpqSasHbaPciLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"SAS Host Bus Adapter PCI Location.
A string designating the PCI device location for the controller,
following the format DDDD:BB:DD.F, where DDDD is the PCI domain number,
BB is the PCI bus number, DD is the PCI device number, and F is
the PCI function number.
A NULL string indicates that the location could not
be determined or is irrelevant."
::= { cpqSasHbaEntry 10 }
-- ****************************************************************************
-- SAS Physical Drive Group
-- ========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSas Group (1.3.6.1.4.1.232.5)
-- cpqSasComponent Group (1.3.6.1.4.1.232.5.5)
-- cpqSasPhyDrv Group (1.3.6.1.4.1.232.5.5.2)
-- cpqSasPhyDrvTable (1.3.6.1.4.1.232.5.5.2.1)
--
--
-- The SAS physical drive group contains configuration and statistical
-- information for physical drives attached to a SAS HBA.
--
-- Implementation of the SAS physical drive group is mandatory for all
-- agents that support the SCSI MIB.
--
-- ****************************************************************************
cpqSasPhyDrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSasPhyDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Table."
::= { cpqSasPhyDrv 1 }
cpqSasPhyDrvEntry OBJECT-TYPE
SYNTAX CpqSasPhyDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Entry."
INDEX { cpqSasPhyDrvHbaIndex, cpqSasPhyDrvIndex }
::= { cpqSasPhyDrvTable 1 }
CpqSasPhyDrvEntry ::= SEQUENCE
{
cpqSasPhyDrvHbaIndex INTEGER,
cpqSasPhyDrvIndex INTEGER,
cpqSasPhyDrvLocationString DisplayString,
cpqSasPhyDrvModel DisplayString,
cpqSasPhyDrvStatus INTEGER,
cpqSasPhyDrvCondition INTEGER,
cpqSasPhyDrvFWRev DisplayString,
cpqSasPhyDrvSize INTEGER,
cpqSasPhyDrvUsedReallocs Counter,
cpqSasPhyDrvSerialNumber DisplayString,
cpqSasPhyDrvMemberLogDrv INTEGER,
cpqSasPhyDrvRotationalSpeed INTEGER,
cpqSasPhyDrvOsName DisplayString,
cpqSasPhyDrvPlacement INTEGER,
cpqSasPhyDrvHotPlug INTEGER,
cpqSasPhyDrvType INTEGER,
cpqSasPhyDrvSasAddress DisplayString,
cpqSasPhyDrvMediaType INTEGER,
cpqSasPhyDrvSSDWearStatus INTEGER,
cpqSasPhyDrvPowerOnHours Counter,
cpqSasPhyDrvSSDPercntEndrnceUsed Gauge,
cpqSasPhyDrvSSDEstTimeRemainingHours Counter,
cpqSasPhyDrvAuthenticationStatus INTEGER,
cpqSasPhyDrvSmartCarrierAppFWRev INTEGER,
cpqSasPhyDrvSmartCarrierBootldrFWRev INTEGER,
cpqSasPhyDrvCurrTemperature Gauge,
cpqSasPhyDrvTemperatureThreshold Gauge,
cpqSasPhyDrvSsBoxModel DisplayString,
cpqSasPhyDrvSsBoxFwRev DisplayString,
cpqSasPhyDrvSsBoxVendor DisplayString,
cpqSasPhyDrvSsBoxSerialNumber DisplayString
}
cpqSasPhyDrvHbaIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive HBA Index.
The HBA index indicates to which SAS adapter instance this table
entry belongs."
::= { cpqSasPhyDrvEntry 1 }
cpqSasPhyDrvIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Index.
The physical drive index indicates to which physical drive
instance this table entry belongs."
::= { cpqSasPhyDrvEntry 2 }
cpqSasPhyDrvLocationString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Location String.
This string describes the location of the drive in relation to
the HBA. If the location string cannot be determined, the agent
will return a NULL string."
::= { cpqSasPhyDrvEntry 3 }
cpqSasPhyDrvModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Model.
This is a physical drive`s model name. It can be used for
identification purposes."
::= { cpqSasPhyDrvEntry 4 }
cpqSasPhyDrvStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
predictiveFailure(3),
offline(4),
failed(5),
missingWasOk(6),
missingWasPredictiveFailure(7),
missingWasOffline(8),
missingWasFailed(9),
ssdWearOut(10),
missingWasSSDWearOut(11),
notAuthenticated(12),
missingWasNotAuthenticated(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Status.
The physical drive can be in one of the following states:
other(1)
The drive is in a state other than one of those listed
below.
ok(2)
Indicates that the physical drive is in normal operation mode.
No user action is necessary.
predictiveFailure(3)
Indicates that the physical drive has exceeded a threshold
value for one of it`s predictive indicators.
offline(4)
Indicates that the physical drive is offline and can no longer
return data. No further status is available.
failed(5)
Indicates that the physical drive has failed and can no longer
return data.
missingWasOk(6)
Indicates that a physical drive had a status of ok(2) and is
no longer present. The drive has been removed.
missingWasPredictiveFailure(7)
Indicates that a physical drive had a status of
predictiveFailure(3) and is no longer present. The drive has
been removed.
missingWasOffline(8)
Indicates that a physical drive had a status of offline(4) and
is no longer present. The drive has been removed.
missingWasFailed(9)
Indicates that a physical drive had a status of failed(5) and
is no longer present. The drive has been removed.
ssdWearOut(10)
Indicates that the solid state drive has a S.M.A.R.T wear
error and is approaching the maximum usage limit for writes
(wear out). The solid state drive should be replaced as soon as
possible.
missingWasSSDWearOut(11)
Indicates that a physical drive had a status of ssdWearout(10)
and is no longer present. The drive has been removed.
notAuthenticated(12)
Indicates the physical drive could not be authenticated as a genuine
HP hard drive. The host bus adapter will no longer control the drive
LEDs. Please replace the hard drive with a genuine HP hard drive.
missingNotAuthenticated(13)
Indicates that a physical drive had a status of notAuthenticated(12)
and is no longer present. The drive has been removed."
::= { cpqSasPhyDrvEntry 5 }
cpqSasPhyDrvCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Condition.
This is the overall condition of the physical drive.
The following values are defined:
other(1)
The agent does not recognize the status. You may need
to upgrade your software.
ok(2)
The physical drive is operating normally. No user action
is required.
degraded(3)
The physical drive is degraded.
failed(4)
The physical drives has failed."
::= { cpqSasPhyDrvEntry 6 }
cpqSasPhyDrvFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Firmware Revision.
This is the firmware revision of the physical drive."
::= { cpqSasPhyDrvEntry 7 }
cpqSasPhyDrvSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Size in MB.
This is the size of the physical drive in megabytes.
This value is calculated using the value 1,048,576 (2^20) as
a megabyte. Drive manufacturers sometimes use the number
1,000,000 as a megabyte when giving drive capacities so this
value may differ from the advertised size of a drive."
::= { cpqSasPhyDrvEntry 8 }
cpqSasPhyDrvUsedReallocs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Used Reallocation Sectors.
This shows the number of sectors of the reallocation area that
have been used by the physical drive over the life of the drive."
::= { cpqSasPhyDrvEntry 9 }
cpqSasPhyDrvSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Serial Number.
This is the serial number assigned to the physical drive."
::= { cpqSasPhyDrvEntry 10 }
cpqSasPhyDrvMemberLogDrv OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
member(2),
spare(3),
nonMember(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Physical Drive is a Member of a Logical Drive.
This is an indication of whether the physical drive is
a member of a logical drive.
This variable can be in one of the following states:
other(1)
The agent is unable to determine if the physical drive is a
member of a logical drive.
member(2)
The physical drive is a member of a logical drive.
spare(2)
The physical drive is a spare drive for a logical drive.
nonMember(4)
The physical drive is not a logical drive member or spare."
::= { cpqSasPhyDrvEntry 11 }
cpqSasPhyDrvRotationalSpeed OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rpm7200(2),
rpm10K(3),
rpm15K(4),
rpmSsd(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Rotational Speed.
The following values are defined:
other(1)
The agent is unable to determine the rotational speed for
this drive.
rpm7200(2)
The rotational speed for this drive is 7200 rpm.
rpm10K(3)
The rotational speed for this drive is 10000 rpm.
rpm15K(4)
The rotational speed for this drive is 15000 rpm.
rpmSsd(5)
The drive is made of solid state electronics and does not
have a rotational speed."
::= { cpqSasPhyDrvEntry 12 }
cpqSasPhyDrvOsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive OS Name.
The OS name for this SAS physical drive. This field will be
a null (size 0) string if the agent does not support OS name."
::= { cpqSasPhyDrvEntry 13 }
cpqSasPhyDrvPlacement OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
internal(2),
external(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Placement.
The following values are defined:
other(1)
The agent is unable to determine if the drive is internal or
external.
internal(2)
The drive is located in an internal system chassis.
external(3)
The drive is located in an external storage system."
::= { cpqSasPhyDrvEntry 14 }
cpqSasPhyDrvHotPlug OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hotPlug(2),
nonHotPlug(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Hot Plug Support Status.
The following values are defined:
other(1)
The agent is unable to determine if this drive
supports hot plug replacement.
hotPlug(2)
The drive supports hot plug replacement.
nonhotPlug(3)
The drive does not support hot plug replacement."
::= { cpqSasPhyDrvEntry 15 }
cpqSasPhyDrvType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sas(2),
sata(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Type.
The following values are defined:
other(1)
The agent is unable to determine the type for this drive.
sas(2)
The drive type is Serial Attached SCSI.
sata(3)
The drive type is Serial ATA."
::= { cpqSasPhyDrvEntry 16 }
cpqSasPhyDrvSasAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive SAS Address.
The SAS address this SAS physical drive. A null (size 0) string
will be returned if the value cannot be determined."
::= { cpqSasPhyDrvEntry 17 }
cpqSasPhyDrvMediaType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rotatingPlatters(2),
solidState(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Media Type.
The following values are defined:
other(1)
The instrument agent is unable to determine the physical drive<76>s
media type.
rotatingPlatters(2)
The physical drive media is composed of rotating platters.
solidState(3)
The physical drive media is composed of solid state electronics."
::= { cpqSasPhyDrvEntry 18 }
cpqSasPhyDrvSSDWearStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
fiftySixDayThreshold(3),
fivePercentThreshold(4),
twoPercentThreshold(5),
ssdWearOut(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Solid State Disk Wear Status.
This shows the wear status of the solid state physical drive.
The following values are valid for the physical drive solid state
wear status:
Other (1)
The instrument agent is unable to determine the physical drive<76>s
solid state disk wear status. This value would be used for non
SSD drives or SSD drives that do not support wear reporting.
Ok (2)
Indicates the solid state disk is not in any imminent danger
of wear out.
Fifty Six Day Threshold Passed (3)
Indicates that based upon the current workload, the solid state
disk will reach the maximum usage limit for writes (wear out)
within fifty-six days. You should modify your write workload or
begin preparing to replace your SSD drive.
Five Percent Threshold Passed (4)
Indicates that the solid state disk has passed the five percent
threshold and is at or below five percent of reaching the maximum
usage limit for writes (wear out). You should begin to prepare
to replace your SSD drive.
Two Percent Threshold Passed (5)
Indicates that the solid state disk has passed the two percent
threshold and is at or below two percent of reaching the maximum
usage limit for writes (wear out). You should begin to prepare
to replace your SSD drive.
SSD Wear Out(6)
Indicates that a solid state drive is approaching the maximum
usage limit for writes (wear out) and should be replaced as soon
as possible."
::= { cpqSasPhyDrvEntry 19 }
cpqSasPhyDrvPowerOnHours OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Power On Hours.
This is the total number of hours that the physical disk
has been powered on. This value will be 4,294,967,295 if the disk
power on hours cannot be determined or is not supported."
::= { cpqSasPhyDrvEntry 20 }
cpqSasPhyDrvSSDPercntEndrnceUsed OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Solid State Percent Endurance Used.
This value specifies the hundredths of the percentage of solid state
disk life used. The value of this field is allowed to exceed 100%.
As an example, if the value reported is 50, this would indicate .50
percent endurance used.
This value will be 4,294,967,295 if the percent endurance used cannot
be determined or is not supported."
::= { cpqSasPhyDrvEntry 21 }
cpqSasPhyDrvSSDEstTimeRemainingHours OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Solid State Estimated Time Remaining In
Hours.
This is the estimated total number of hours that the solid state
physical disk has remaining. This value will be 4,294,967,295 if the
solid state disk estimated time remaining in hours cannot be
determined or is not supported."
::= { cpqSasPhyDrvEntry 22 }
cpqSasPhyDrvAuthenticationStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
authenticationFailed(3),
authenticationPassed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Authentication Status.
The following values are defined:
Other (1)
Indicates that the instrument agent can not determine the
physical drive`s authentication status.
Not Supported (2)
Indicates that authentication for this physical drive is not
supported.
Authentication Failed(3)
The physical drive could not be authenticated as a genuine HP hard drive. The
host bus adapter will no longer control the drive LEDs. Please replace the
hard drive with a genuine HP hard drive.
Authentication Passed(4)
The physical drive has passed all authentication tests and has been validated
to be a genuine HP hard drive."
::= { cpqSasPhyDrvEntry 23 }
cpqSasPhyDrvSmartCarrierAppFWRev OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Smart Carrier Application Firmware Revision.
This displays the physical drive smart carrier application
firmware revision number.
This value will be nonzero if the physical drive supports
authentication and cpqSasPhyDrvAuthenticationStatus has a value of
authenticationPassed(4)."
::= { cpqSasPhyDrvEntry 24 }
cpqSasPhyDrvSmartCarrierBootldrFWRev OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Smart Carrier Bootloader Firmware Revision.
This displays the physical drive smart carrier bootloader
firmware revision number.
This value will be nonzero if the physical drive supports
authentication and cpqSasPhyDrvAuthenticationStatus has a value of
authenticationPassed(4)."
::= { cpqSasPhyDrvEntry 25 }
cpqSasPhyDrvCurrTemperature OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Current Operating Temperature degrees Celsius. A zero (0) indicates that
the temperature information is not available."
::= { cpqSasPhyDrvEntry 26 }
cpqSasPhyDrvTemperatureThreshold OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Maximum Operating Temperature in degrees Celsius. A zero (0) indicates that
the threshold information is not available."
::= { cpqSasPhyDrvEntry 27 }
cpqSasPhyDrvSsBoxModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Box Model.
This is a description of the SAS drive box`s model.
This can be used for identification purposes."
::= { cpqSasPhyDrvEntry 28 }
cpqSasPhyDrvSsBoxFwRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Box Firmware Revision.
This is the revision level of the SAS drive box.
This can be used for identification purposes."
::= { cpqSasPhyDrvEntry 29 }
cpqSasPhyDrvSsBoxVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Box Vendor
This is the SAS drive box`s vendor name.
This can be used for identification purposes."
::= { cpqSasPhyDrvEntry 30 }
cpqSasPhyDrvSsBoxSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Box Serial Number.
This is the SAS drive box`s serial number which is normally display
on the front panel. This can be used for identification
purposes. If the box`s serial number cannot be determined, the
agent will return a NULL string."
::= { cpqSasPhyDrvEntry 31 }
-- ****************************************************************************
-- SAS Logical Drive Group
-- =======================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSas Group (1.3.6.1.4.1.232.5)
-- cpqSasComponent Group (1.3.6.1.4.1.232.5.5)
-- cpqSasLogDrv Group (1.3.6.1.4.1.232.5.5.3)
-- cpqSasLogDrvTable (1.3.6.1.4.1.232.5.5.3.1)
--
--
-- The SAS logical drive group contains configuration and statistical
-- information for logical drives on a SAS HBA.
--
-- Implementation of the SAS logical drive group is mandatory for all
-- agents that support the SCSI MIB.
--
-- ****************************************************************************
cpqSasLogDrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSasLogDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SAS Logical Drive Table."
::= { cpqSasLogDrv 1 }
cpqSasLogDrvEntry OBJECT-TYPE
SYNTAX CpqSasLogDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SAS Logical Drive Entry."
INDEX { cpqSasLogDrvHbaIndex, cpqSasLogDrvIndex }
::= { cpqSasLogDrvTable 1 }
CpqSasLogDrvEntry ::= SEQUENCE
{
cpqSasLogDrvHbaIndex INTEGER,
cpqSasLogDrvIndex INTEGER,
cpqSasLogDrvRaidLevel INTEGER,
cpqSasLogDrvStatus INTEGER,
cpqSasLogDrvCondition INTEGER,
cpqSasLogDrvRebuildingDisk INTEGER,
cpqSasLogDrvCapacity INTEGER,
cpqSasLogDrvStripeSize INTEGER,
cpqSasLogDrvPhyDrvIds OCTET STRING,
cpqSasLogDrvSpareIds OCTET STRING,
cpqSasLogDrvOsName DisplayString,
cpqSasLogDrvRebuildingPercent Gauge
}
cpqSasLogDrvHbaIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive HBA Index.
The controller index indicates to which SAS adapter instance
this table entry belongs."
::= { cpqSasLogDrvEntry 1 }
cpqSasLogDrvIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive Index.
The logical drive index indicates to which logical drive instance
this table entry belongs."
::= { cpqSasLogDrvEntry 2 }
cpqSasLogDrvRaidLevel OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
raid0(2),
raid1(3),
raid0plus1(4),
raid5(5),
raid15(6),
volume(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive RAID Level.
The following RAID levels are defined:
other(1)
The agent cannot determine the RAID level of this logical drive.
raid0(2)
The logical drive is configured with RAID level 0.
raid1(3)
The logical drive is configured with RAID level 1."
::= { cpqSasLogDrvEntry 3 }
cpqSasLogDrvStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
rebuilding(4),
failed(5),
offline(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive Status.
The logical drive can be in one of the following states:
other(1)
The management agent does not recognize the status.
You may need to upgrade your software.
ok(2)
Indicates that the logical drive is in normal operation mode.
No user action is required.
degraded(3)
Indicates that the logical drive is in a degraded state.
rebuilding(4)
Indicates that the logical drive is currently resynchronizing
the data accross the physical drives in the logical drive.
failed(5)
Indicates that more physical drives have failed than the
fault tolerance mode of the logical drive can handle without
data loss.
offline(6)
Indicates that the logical drive is offline from the operating
system. User action may be required to bring the logical
drive online."
::= { cpqSasLogDrvEntry 4 }
cpqSasLogDrvCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive Condition.
This is the condition of the logical drive."
::= { cpqSasLogDrvEntry 5 }
cpqSasLogDrvRebuildingDisk OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive Rebuilding Disk.
This is the disk that is in the process of rebuilding. If no
drive is currently rebuilding, a value of -1 will be returned."
::= { cpqSasLogDrvEntry 6 }
cpqSasLogDrvCapacity OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive Size.
This is the capacity of the logical drive in megabytes.
This value is calculated using the value 1,048,576 (2^20) as
a megabyte. Drive manufacturers sometimes use the
number 1,000,000 as a megabyte when giving drive capacities
so this value may differ from the advertised size of a drive."
::= { cpqSasLogDrvEntry 7 }
cpqSasLogDrvStripeSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive Stripe Size.
This is the size of a logical drive stripe in kilobytes."
::= { cpqSasLogDrvEntry 8 }
cpqSasLogDrvPhyDrvIds OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive Physical Drive IDs.
This lists the physical drive ID`s associated with this logical
drive. Each 4 octets of the string can be used as an index
(cpqSasPhyDrvIndex) into the SAS physical drive table. These 4
octets are repeated for each drive in the list. For n disk
drives in the list, the string is 4 * n octets long."
::= { cpqSasLogDrvEntry 9 }
cpqSasLogDrvSpareIds OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive Spare Drive IDs.
This lists the spare drive ID`s associated with this logical
drive. Each 4 octets of the string can be used as an index
(cpqSasPhyDrvIndex) into the SAS physical drive table. These 4
octets are repeated for each drive in the list. For n disk
drives in the list, the string is 4 * n octets long."
::= { cpqSasLogDrvEntry 10 }
cpqSasLogDrvOsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Logical Drive OS Name.
This is the OS name for the logical drive. This field will be
a null (size 0) string if the agent does not support OS name."
::= { cpqSasLogDrvEntry 11 }
cpqSasLogDrvRebuildingPercent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Percent Rebuild.
After a failed physical drive has been replaced, the physical
drive must have its data rebuilt. This value is the percent
complete of the rebuild. When the value reaches 100, the
rebuilding process is complete. The array continues to
operate in interim recovery mode while the disk is rebuilding.
This value is only valid if the Logical Drive Status is
rebuilding(4).
If the value cannot be determined or a rebuild is not active,
the value is set to 4,294,967,295."
::= { cpqSasLogDrvEntry 12 }
-- ****************************************************************************
-- SAS Tape Drive Group
-- ====================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSas Group (1.3.6.1.4.1.232.5)
-- cpqSasComponent Group (1.3.6.1.4.1.232.5.5)
-- cpqSasTapeDrv Group (1.3.6.1.4.1.232.5.5.4)
-- cpqSasTapeDrvTable (1.3.6.1.4.1.232.5.5.4.1)
--
--
-- The SAS tape drive group contains configuration and statistical
-- information for tape drives attached to a SAS HBA.
--
-- Implementation of the SAS tape drive group is mandatory for all
-- agents that support the SCSI MIB.
--
-- ****************************************************************************
cpqSasTapeDrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSasTapeDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Table."
::= { cpqSasTapeDrv 1 }
cpqSasTapeDrvEntry OBJECT-TYPE
SYNTAX CpqSasTapeDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Entry."
INDEX { cpqSasTapeDrvHbaIndex, cpqSasTapeDrvIndex }
::= { cpqSasTapeDrvTable 1 }
CpqSasTapeDrvEntry ::= SEQUENCE
{
cpqSasTapeDrvHbaIndex INTEGER,
cpqSasTapeDrvIndex INTEGER,
cpqSasTapeDrvLocationString DisplayString,
cpqSasTapeDrvName DisplayString,
cpqSasTapeDrvStatus INTEGER,
cpqSasTapeDrvCondition INTEGER,
cpqSasTapeDrvFWRev DisplayString,
cpqSasTapeDrvSerialNumber DisplayString,
cpqSasTapeDrvSasAddress DisplayString
}
cpqSasTapeDrvHbaIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Tape Drive HBA Index.
The HBA index indicates to which SAS adapter instance this table
entry belongs."
::= { cpqSasTapeDrvEntry 1 }
cpqSasTapeDrvIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Tape Drive Index.
The tape drive index indicates to which tape drive instance
this table entry belongs."
::= { cpqSasTapeDrvEntry 2 }
cpqSasTapeDrvLocationString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Tape Drive Location String.
This string describes the location of the drive in relation to
the HBA. If the location string cannot be determined, the agent
will return a NULL string."
::= { cpqSasTapeDrvEntry 3 }
cpqSasTapeDrvName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Tape Drive Name.
This is a combination of the vendor ID and the product ID as
returned by the SCSI inquiry command. This can be used for
identification purposes."
::= { cpqSasTapeDrvEntry 4 }
cpqSasTapeDrvStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
offline(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Physical Drive Status.
The physical drive can be in one of the following states:
other(1)
The tape drive is in a state other than one of those listed
below.
ok(2)
Indicates that the tape drive is in normal operation mode.
No user action is necessary.
offline(3)
Indicates that the tape drive is offline and can no longer
return data. No further status is available."
::= { cpqSasTapeDrvEntry 5 }
cpqSasTapeDrvCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Tape Drive Condition.
This is the overall condition of the tape drive.
The following values are defined:
other(1)
The agent does not recognize the status. You may need
to upgrade your software.
ok(2)
The tape drive is operating normally. No user action is
required.
degraded(3)
The tape drive is degraded.
failed(4)
The tape drives has failed."
::= { cpqSasTapeDrvEntry 6 }
cpqSasTapeDrvFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Tape Drive Firmware Revision.
This is the firmware revision of the tape drive."
::= { cpqSasTapeDrvEntry 7 }
cpqSasTapeDrvSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Tape Drive Serial Number.
This is the serial number assigned to the tape drive."
::= { cpqSasTapeDrvEntry 8 }
cpqSasTapeDrvSasAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SAS Tape Drive SAS Address.
The SAS address of this SAS tape drive. A null (size 0) string
will be returned if the value cannot be determined."
::= { cpqSasTapeDrvEntry 9 }
-- ****************************************************************************
-- SCSI Trap Definitions
-- ======================
--
-- The SNMP trap messages must not be bigger than 484 octets (bytes).
--
-- Trap support in an SNMP agent implementation is optional. An SNMP
-- agent implementation may support all, some, or none of the traps.
-- If traps are supported, The user should be provided with the option of
-- disabling traps.
--
-- **************************************************************************
cpqScsiCntlrStatusChange TRAP-TYPE
ENTERPRISE cpqScsi
VARIABLES { cpqScsiCntlrStatus }
DESCRIPTION
"SCSI Controller Status Change.
The agent has detected a change in the controller
status of a SCSI Controller. The variable
cpqScsiCntlrStatus indicates the current controller status."
--#TYPE "SCSI Controller Status Change (1)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 1
cpqScsiLogDrvStatusChange TRAP-TYPE
ENTERPRISE cpqScsi
VARIABLES { cpqScsiLogDrvStatus }
DESCRIPTION
"Logical Drive Status Change.
The agent has detected a change in the Logical Drive
Status of a SCSI logical drive. The current logical
drive status is indicated by the cpqScsiLogDrvStatus variable."
--#TYPE "SCSI Logical Drive Status Change (2)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 2
cpqScsiPhyDrvStatusChange TRAP-TYPE
ENTERPRISE cpqScsi
VARIABLES { cpqScsiPhyDrvStatus }
DESCRIPTION
"Physical Drive Status Change.
The agent has detected a change in the status of a
SCSI physical drive. The current physical drive
status is indicated in the cpqScsiPhyDrvStatus variable."
--#TYPE "SCSI Physical Drive Status Change (3)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3
cpqScsi2CntlrStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqScsiCntlrStatus }
DESCRIPTION
"SCSI Controller Status Change.
The agent has detected a change in the controller
status of a SCSI Controller. The variable
cpqScsiCntlrStatus indicates the current controller status."
--#TYPE "SCSI Controller Status Change (5001)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 5001
cpqScsi2LogDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqScsiLogDrvStatus }
DESCRIPTION
"Logical Drive Status Change.
The agent has detected a change in the Logical Drive
Status of a SCSI logical drive. The current logical
drive status is indicated by the cpqScsiLogDrvStatus variable."
--#TYPE "SCSI Logical Drive Status Change (5002)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 5002
cpqScsi2PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqScsiPhyDrvStatus }
DESCRIPTION
"Physical Drive Status Change.
The agent has detected a change in the status of a
SCSI physical drive. The current physical drive
status is indicated in the cpqScsiPhyDrvStatus variable."
--#TYPE "SCSI Physical Drive Status Change (5003)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 5003
cpqTapePhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqTapePhyDrvCondition }
DESCRIPTION
"Tape Drive Status Change.
The agent has detected a change in the status of a
Tape drive. The current physical drive status is
indicated in the cpqTapePhyDrvCondition variable."
--#TYPE "Tape Drive Status Change (5004)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 5004
cpqScsi3CntlrStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqScsiCntlrStatus }
DESCRIPTION
"SCSI Controller Status Change.
The agent has detected a change in the controller
status of a SCSI Controller. The variable
cpqScsiCntlrStatus indicates the current controller status."
--#TYPE "SCSI Controller Status Change (5005)"
--#SUMMARY "SCSI controller status is now %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
::= 5005
cpqScsi3PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqScsiPhyDrvStatus }
DESCRIPTION
"Physical Drive Status Change.
The agent has detected a change in the status of a
SCSI physical drive. The current physical drive
status is indicated in the cpqScsiPhyDrvStatus variable."
--#TYPE "SCSI Physical Drive Status Change (5006)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 5006
cpqTape3PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapePhyDrvCondition }
DESCRIPTION
"Tape Drive Status Change.
The agent has detected a change in the status of a
Tape drive. The current physical drive status is
indicated in the cpqTapePhyDrvCondition variable."
--#TYPE "Tape Drive Status Change (5007)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 5007
cpqTape3PhyDrvCleaningRequired TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapePhyDrvCondition }
DESCRIPTION
"Tape Drive Cleaning Required trap.
The agent has detected a tape drive that needs to have
a cleaning tape inserted and run. This will cause the tape drive
heads to be cleaned."
--#TYPE "Tape Drive Cleaning Required (5008)"
--#SUMMARY "Tape drive cleaning required (Status: %d)."
--#ARGUMENTS {2}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "Insert and run a cleaning tape in the tape drive."
::= 5008
cpqTape3PhyDrvCleanTapeReplace TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapePhyDrvCondition }
DESCRIPTION
"Tape Drive Cleaning Tape Needs Replacing.
The agent has detected that an autoloader tape unit has
a cleaning tape that has been fully used and therefore needs to
be replaced with a new cleaning tape."
--#TYPE "Tape Drive Cleaning Tape Needs Replacing (5009)"
--#SUMMARY "Tape drive cleaning tape needs replacing (Status: %d)."
--#ARGUMENTS {2}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "Replace the cleaning tape."
::= 5009
cpqTape3LibraryFailed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapeLibrarySerialNumber }
DESCRIPTION
"Tape Library Error
The agent has detected that an autoloader unit has
an encountered an error."
--#TYPE "Tape Library Error (5010)"
--#SUMMARY "Tape library %s is not operational."
--#ARGUMENTS {2}
--#SEVERITY MAJOR
--#TIMEINDEX 99
::= 5010
cpqTape3LibraryOkay TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapeLibrarySerialNumber }
DESCRIPTION
"Tape Library Okay
The agent has detected that an autoloader unit has
recovered from errors."
--#TYPE "Tape Library Okay (5011)"
--#SUMMARY "Tape Library %s Recovered"
--#ARGUMENTS {2}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
::= 5011
cpqTape3LibraryDegraded TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapeLibrarySerialNumber }
DESCRIPTION
"Tape Library Degraded
The agent has detected that an autoloader unit is
in a degraded condition."
--#TYPE "Tape Library Degraded (5012)"
--#SUMMARY "Tape library %s is in a degraded condition."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 5012
cpqTape3LibraryDoorOpen TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapeLibrarySerialNumber }
DESCRIPTION
"Tape Library Door Open
The agent has detected that the door on an autoloader
is open so the unit is not operational."
--#TYPE "Tape Library Door Opened (5013)"
--#SUMMARY "Tape library %s door opened."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "Close the door on the tape library."
::= 5013
cpqTape3LibraryDoorClosed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapeLibrarySerialNumber }
DESCRIPTION
"Tape Library Door Closed
The agent has detected that the door on a an autoloader
has closed."
--#TYPE "Tape Library Door Closed (5014)"
--#SUMMARY "Tape library %s door closed."
--#ARGUMENTS {2}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#SIMPLE_SEVERITY OK
--#HWSTATUS_CATEGORY STORAGE
::= 5014
cpqScsiCdLibraryStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqCdLibraryCntlrIndex,
cpqCdLibraryBusIndex, cpqCdLibraryScsiIdIndex,
cpqCdLibraryStatus }
DESCRIPTION
"CD Library Status Change.
The agent has detected a change in the status of a
CD Library device. The current CD Library status is
indicated in the cpqScsiCdLibraryCondition variable."
--#TYPE "CD Library Status Change (5015)"
--#SUMMARY "CD library status is now %d (Index: %d, Bus: %d, Controller: %d)."
--#ARGUMENTS {5, 4, 3, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
::= 5015
cpqTape4PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapePhyDrvCntlrIndex,
cpqTapePhyDrvBusIndex, cpqTapePhyDrvScsiIdIndex,
cpqTapePhyDrvStatus }
DESCRIPTION
"Tape Drive Status Change.
The Storage Agent has detected a change in the status of a
Tape drive. The current physical drive status is
indicated in the cpqTapePhyDrvStatus variable."
--#TYPE "Tape Drive Status Change (5016)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {5}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 5016
cpqScsi4PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqScsiPhyDrvStatus,
cpqScsiPhyDrvCntlrIndex, cpqScsiPhyDrvBusIndex,
cpqScsiPhyDrvIndex, cpqScsiPhyDrvVendor,
cpqScsiPhyDrvModel, cpqScsiPhyDrvFWRev,
cpqScsiPhyDrvSerialNum }
DESCRIPTION
"Physical Drive Status Change.
The Storage Agent has detected a change in the status of a
SCSI physical drive. The current physical drive
status is indicated in the cpqScsiPhyDrvStatus variable."
--#TYPE "SCSI Physical Drive Status Change (5017)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 5017
cpqTapeLibraryStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapeLibraryCntlrIndex,
cpqTapeLibraryBusIndex, cpqTapeLibraryScsiIdIndex,
cpqTapeLibraryLunIndex, cpqTapeLibraryName,
cpqTapeLibraryFwRev, cpqTapeLibrarySerialNumber,
cpqTapeLibraryState }
DESCRIPTION
"Tape Library Status Change
The Storage Agent has detected a change in the status of a
tape library. The current tape library status is
indicated in the cpqTapeLibraryState variable."
--#TYPE "Tape Library Status Change (5018)"
--#SUMMARY "Tape library status is now %d (Index: %d, Bus: %d, Controller: %d)."
--#ARGUMENTS {9, 4, 3, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the tape library status is 'degraded(3)' or 'failed(4)', schedule downtime for the server and run diagnostics to help identify the problem."
::= 5018
cpqTape5PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqTapePhyDrvCntlrIndex,
cpqTapePhyDrvBusIndex, cpqTapePhyDrvScsiIdIndex,
cpqTapePhyDrvLunIndex, cpqTapePhyDrvName,
cpqTapePhyDrvFwRev, cpqTapePhyDrvSerialNumber,
cpqTapePhyDrvStatus }
DESCRIPTION
"Tape Drive Status Change.
The Storage Agent has detected a change in the status of a
tape drive. The current physical drive status is
indicated in the cpqTapePhyDrvStatus variable."
--#TYPE "Tape Drive Status Change (5019)"
--#SUMMARY "Tape drive status is now %d (Drive: %d, Bus: %d, Controller: %d)."
--#ARGUMENTS {9, 4, 3, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the tape drive status is 'failed(4)', replace the tape drive."
::= 5019
cpqScsi5PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqScsiPhyDrvStatus,
cpqScsiPhyDrvCntlrIndex, cpqScsiPhyDrvBusIndex,
cpqScsiPhyDrvIndex, cpqScsiPhyDrvVendor,
cpqScsiPhyDrvModel, cpqScsiPhyDrvFWRev,
cpqScsiPhyDrvSerialNum, cpqScsiPhyDrvOsName }
DESCRIPTION
"Physical Drive Status Change.
The Storage Agent has detected a change in the status of a
SCSI physical drive. The current physical drive
status is indicated in the cpqScsiPhyDrvStatus variable."
--#TYPE "SCSI Physical Drive Status Change (5020)"
--#SUMMARY "SCSI physical drive status is now %d (Drive: %d, Bus: %d, Controller: %d)."
--#ARGUMENTS {2, 5, 4, 3}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the physical drive status is 'failed(3)' or 'predictiveFailure(8)', replace the drive."
::= 5020
cpqScsi3LogDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqScsiLogDrvStatus,
cpqScsiLogDrvCntlrIndex, cpqScsiLogDrvBusIndex,
cpqScsiLogDrvIndex, cpqScsiLogDrvOsName }
DESCRIPTION
"Logical Drive Status Change.
The Storage Agent has detected a change in the status of a
SCSI logical drive. The current logical drive status is
indicated in the cpqScsiLogDrvStatus variable."
--#TYPE "SCSI Logical Drive Status Change (5021)"
--#SUMMARY "SCSI logical drive status is now %d (Drive: %d, Bus: %d, Controller: %d)."
--#ARGUMENTS {2, 5, 4, 3}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the logical drive status is 'recovering(5)', at least one drive has failed but no data has been lost. If the logical drive status is 'failed(3)', data loss has occurred. Check the connections and replace the failed physical drives."
::= 5021
cpqSasPhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSasHbaHwLocation,
cpqSasPhyDrvLocationString, cpqSasPhyDrvHbaIndex,
cpqSasPhyDrvIndex, cpqSasPhyDrvStatus,
cpqSasPhyDrvType, cpqSasPhyDrvModel, cpqSasPhyDrvFWRev,
cpqSasPhyDrvSerialNumber, cpqSasPhyDrvSasAddress }
DESCRIPTION
"Physical Drive Status Change.
The Storage Agent has detected a change in the status of a
SAS or SATA physical drive. The current physical drive status
is indicated in the cpqSasPhyDrvStatus variable.
User Action: If cpqSasPhyDrvStatus is 'predictiveFailure(3)',
`failed(5)`, `ssdWearOut(10)` or `notAuthenticated(12)`,
replace the drive."
--#TYPE "SAS/SATA Physical Drive Status Change (5022)"
--#SUMMARY "SAS/SATA physical drive status is now %d for drive at location %s connected to controller in %s."
--#ARGUMENTS {6, 3, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the physical drive status is 'predictiveFailure(3)', 'failed(5)', 'ssdWearOut(10)' or 'notAuthenticated(12)', replace the drive."
::= 5022
cpqSasLogDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSasHbaHwLocation,
cpqSasLogDrvHbaIndex, cpqSasLogDrvIndex,
cpqSasLogDrvStatus, cpqSasLogDrvOsName }
DESCRIPTION
"Logical Drive Status Change.
The Storage Agent has detected a change in the status of a
SAS or SATA logical drive. The current logical drive status is
indicated in the cpqSasLogDrvStatus variable."
--#TYPE "SAS/SATA Logical Drive Status Change (5023)"
--#SUMMARY "SAS/SATA logical drive status is now %d for drive name %s connected to controller in %s."
--#ARGUMENTS {5, 6, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the logical drive status is 'failed(5)', data has been lost. Replace the failed physical drives."
::= 5023
cpqSas2TapeDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSasHbaHwLocation,
cpqSasTapeDrvLocationString, cpqSasTapeDrvHbaIndex,
cpqSasTapeDrvIndex, cpqSasTapeDrvName,
cpqSasTapeDrvFWRev, cpqSasTapeDrvSerialNumber,
cpqSasTapeDrvSasAddress, cpqSasTapeDrvStatus }
DESCRIPTION
"SAS Tape Drive Status Change.
The Storage Agent has detected a change in the status of a
SAS tape drive. The current tape drive status is
indicated in the cpqSasTapeDrvStatus variable."
--#TYPE "SAS Tape Drive Status Change (5025)"
--#SUMMARY "SAS tape drive Status is now %d for drive at location %s connected to controller in %s."
--#ARGUMENTS {10, 3, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
::= 5025
cpqSasPhyDrvSSDWearStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSasHbaHwLocation,
cpqSasPhyDrvLocationString, cpqSasPhyDrvHbaIndex,
cpqSasPhyDrvIndex, cpqSasPhyDrvType, cpqSasPhyDrvModel,
cpqSasPhyDrvFWRev, cpqSasPhyDrvSerialNumber,
cpqSasPhyDrvSasAddress, cpqSasPhyDrvSSDWearStatus}
DESCRIPTION
"Solid State Disk Wear Status Change.
This trap signifies that the agent has detected a change in the
SSD wear status of a SAS or SATA physical drive. The variable
cpqSasPhyDrvSSDWearStatus indicates the current SSD wear status.
User Action: If cpqSasPhyDrvSSDWearStatus is `ssdWearOut(6)`,
replace the drive."
--#TYPE "Solid State Disk Wear Status Change (5026)"
--#SUMMARY "Solid state disk wear status is now %d for drive at location %s connected to controller in %s."
--#ARGUMENTS {11, 3, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the SSD wear status is 'ssdWearOut(6)', replace the drive."
::= 5026
END
View Git Blame Copy Permalink