WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/arris/ARRIS-MTA-DEVICE-MIB

3980 lines
148 KiB
Plaintext
Raw Blame History

ARRIS-MTA-DEVICE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
Counter64,
IpAddress
FROM SNMPv2-SMI
arrisProdIdCM
FROM ARRIS-MIB
TruthValue, DisplayString, TimeStamp, DateAndTime, TEXTUAL-CONVENTION, PhysAddress
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
arrisMtaDevMib MODULE-IDENTITY
LAST-UPDATED "1506250000Z" -- June 25, 2015
ORGANIZATION "ARRIS Broadband"
CONTACT-INFO "Rodney Osborne
Postal: ARRIS Broadband
3871 Lakefield Drive
Suite 300
Suwanee, GA 30024-1242
U.S.A.
Phone: +1 770-622-8400
E-mail: rodney.osborne@arrisi.com"
DESCRIPTION
"This MIB module supplies the basic proprietary
management objects for ARRIS MTA devices."
-- Revision history
REVISION "1506250000Z" -- June 25, 2015
DESCRIPTION
"Added new MIB arrisMtadocsQosServiceTable, arrisMtadocsQosDisableLoggin, arrisMtadocsQosLogClear and arrisMtadocsQosShowDsxLogTable"
REVISION "1501200000Z" -- Jan 20, 2015
DESCRIPTION
"Change default value related description of mib arrisMtaDevPwrSupplyDataShutdownTime."
REVISION "1205020000Z" -- May 2, 2012
DESCRIPTION
"Add persistence to description for arrisMtaDevEndPntHDAudioEnable MIB and change default of arrisMtaDevWBSLIC to disable."
REVISION "1203160000Z" -- March 16, 2012
DESCRIPTION
"Added new table arrisMtaDevCmIpTable"
REVISION "1203150000Z" -- Mar 15, 2012
DESCRIPTION
"Modified OID for arrisMtaDevHDAudioEnable from 48 to 53"
REVISION "1203060000Z" -- Mar 6, 2012
DESCRIPTION
"Added new MIB arrisMtaDevHDAudioG722SampleRate"
REVISION "1202280000Z" -- Feb 28, 2012
DESCRIPTION
"Added new MIB arrisMtaDevProvisionedCodecArray"
REVISION "1202210000Z" -- Feb 21, 2012
DESCRIPTION
"Added MIBs to support HD Audio."
REVISION "1104180000Z" -- Apr 18, 2011
DESCRIPTION
"Modified MIB arrisMtaDevEndPntRingingWaveform description."
REVISION "1104070000Z" -- Apr 7, 2011
DESCRIPTION
"Added new MIB arrisMtaDevPwrSupplyEnableWifiShutdown"
REVISION "1006220000Z" -- June 22, 2010
DESCRIPTION
"Changed arrisMtaDevMaxCallPServiceFlows OID from { arrisMtaDevOperationalSetup 46 }
to { arrisMtaDevOperationalSetup 47 }"
REVISION "1005050000Z" -- May 5, 2010
DESCRIPTION
"Added new MIB arrisMtaDevMaxCallPServiceFlows"
REVISION "1003030000Z" -- March 3, 2010
DESCRIPTION
"Added new alarm autonomous types upsAlarmAwaitingPower and upsAlarmShutdownPending for
upsAlarmDescr MIB"
REVISION "1002100000Z" -- February 10, 2010
DESCRIPTION
"Added new alarm autonomous types upsAlarmBatteryBad, upsAlarmLowBattery, upsAlarmDepletedBattery,
upsAlarmUpsOutputOff, upsAlarmOutputOffAsRequested, upsAlarmGeneralFault, upsAlarmShutdownImminent,
upsAlarmBatteryMissing for upsAlarmDescr MIB"
REVISION "1001200000Z" -- January 20, 2010
DESCRIPTION
"Added new MIB arrisMtaDevEventFormat"
REVISION "0906300000Z" -- June 30, 2009
DESCRIPTION
"Added new MIB arrisMtaDevEndPntGainControlTxVoice, and arrisMtaDevEndPntGainControlRxVoice"
REVISION "0905040000Z" -- May 04, 2009
DESCRIPTION
"Added new MIB arrisMtaDevEndPntLoopReversal"
REVISION "0904290000Z" -- Apr 29, 2009
DESCRIPTION
"Added new MIB arrisMtaDevEndPntCIDEnable, arrisMtaDevEndPntCIDNameEnable,
arrisMtaDevEndPntCIDDateTimeEnable"
REVISION "0904200000Z" -- Apr 20, 2009
DESCRIPTION
"Added new MIB arrisMtaDevEndPntCallWaitingRepeatSteady"
REVISION "0812020000Z" -- Dec 02, 2008
DESCRIPTION
"Added new MIB arrisMtaDevPersistentLineStatus"
REVISION "0902020000Z" -- February 13, 2009
DESCRIPTION
"Added new mib arrisMtaDevDTMFEndEventForceAscending"
REVISION "0809220000Z" -- Sept 22, 2008
DESCRIPTION
"Added ac-Fail chargerOverTemp-Shutdown chargerTemperature-High
batteryCharger-Disabled chargerDownload-Failed and battery-Mismatch "
REVISION "0806170000Z" -- June 17, 2008
DESCRIPTION
"Added Null option to arrisMtaDevDefaultReasonNoCIDName and
added new MIB arrisMtaDevOffHookFskDelay"
REVISION "0806100000Z" -- Jun 10, 2008
DESCRIPTION
"Added arrisMtaDevEndPntFaxOnlyLineTimeout"
REVISION "0804120000Z" -- April 12, 2008
DESCRIPTION
"Added arrisMtaDevRestoreNvmFactoryDefault"
REVISION "0804220000Z" -- April 22, 2008
DESCRIPTION
"Added arrisMtaDevVqmCallNumberIdentifierLastCall"
REVISION "0804010000Z" -- April 01, 2008
DESCRIPTION
"Added arrisMtaDevPwrSupplyControlChargerReset"
REVISION "0802220000Z" -- February 22, 2008
DESCRIPTION
"Added arrisMtaDevPwrSupplyHighestTemperatureTime and
arrisMtaDevPwrSupplyHighestTemperatureClear"
REVISION "0802040000Z" -- February 04, 2008
DESCRIPTION
"Added arrisMtaDevPacketcableProvisioningFlow"
REVISION "0801290000Z" -- January 29, 2008
DESCRIPTION
"Added arrisMtaDevPwrSupplyHighestTemperature"
REVISION "0801170000Z" -- January 17, 2008
DESCRIPTION
"Increased range of arrisMtaDevGainControlRxVoice and TxVoice MIBs"
REVISION "0801170000Z" -- January 17, 2008
DESCRIPTION
"Added SDMF option to arrisMtaDevDefaultReasonNoCIDName"
REVISION "1107130000Z" -- November 13, 2007
DESCRIPTION
"Added arrisMtaDevGainControlOffHookEnable, arrisMtaDevGainControlOffHookFSK, and
arrisMtaDevGainControlOffHookCAS"
REVISION "1007300000Z" -- October 30,2007
DESCRIPTION
"Added arrisMtaDevAutomaticCallResourceRecovery"
REVISION "0707270000Z" -- July 27,2007
DESCRIPTION
"Added arrisMtaDevTDDReportToCMS"
REVISION "0704090000Z" -- April 9,2007
DESCRIPTION
"Added arrisMtaDevAutomaticOsiDelay."
REVISION "0611290000Z" -- March 29, 2006
DESCRIPTION
"Added arrisMtaDevTFTPServerAddrOverrideFQDN. Also added new ProvMethodIndicator
gupiTftpSvrOverride"
REVISION "0603290000Z" -- March 29, 2006
DESCRIPTION
"Added arrisMtaDevDspCpsSetting object."
REVISION "0602170000Z" -- February 17, 2006
DESCRIPTION
"Added in mib to allow for query of the Dhcp parameters per PD#76971."
REVISION "0502010000Z" -- February 1, 2005
DESCRIPTION
"Added object 'arrisMtaDevGainControl'."
REVISION "0507270000Z" -- July 27, 2005
DESCRIPTION
"Modified range for object 'arrisMtaDevGainControlLocalDTMF' from (-9..9) to (-15..9)."
REVISION "0502010000Z" -- February 1, 2005
DESCRIPTION
"Added object 'arrisMtaDevGainControl'."
REVISION "0501040000Z" -- January 4, 2005
DESCRIPTION
"Added object 'arrisMtaDevDspHandleNonPhaseReversedTone'."
REVISION "0412160000Z" -- December 16, 2004
DESCRIPTION
"Added object 'arrisMtaDevProvMethodIndicator' and table
'arrisMtaDevEndPntTable."
REVISION "0307110000Z" -- July 11, 2003
DESCRIPTION
"Initial version"
::= { arrisProdIdCM 3 }
-- Textual Conventions
ArrsMtaDevProvMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "These are the various provisioning methods that are
supported by the device."
SYNTAX INTEGER {
docsisOnly(0),
fullPacketCable(1),
packetCableMinusKDC(2),
cps(3),
gupi(4),
singleMAC(5),
basic1(6),
basic2(7),
gupiEncryptedMtaConfig(8),
gupiMacMta(9),
gupiEncryptedMacMta(10),
gupiTftpSvrOverride(11)
}
CodecType ::= TEXTUAL-CONVENTION
STATUS obsolete
DESCRIPTION "These are the various types of codecs that
may be supported."
SYNTAX INTEGER{
g711u(1),
g711a(2),
g7231(3),
g729(4),
g729a(5),
g729e(6),
g726(7),
g728(8)
}
PacketizationPeriodType ::= TEXTUAL-CONVENTION
STATUS obsolete
DESCRIPTION "The packetization periods supported by the PacketPort."
SYNTAX INTEGER{
ten(10),
twenty(20),
thirty(30)
}
SignalingProtocol ::= TEXTUAL-CONVENTION
STATUS obsolete
DESCRIPTION "These are the various signaling protocols
that may be supported."
SYNTAX INTEGER{
none(0),
ncs(1)}
-- This MIB module contains the following groups.
arrisMtaDevMibObjects OBJECT IDENTIFIER ::= { arrisMtaDevMib 1 }
arrisMtaDevBase OBJECT IDENTIFIER ::= { arrisMtaDevMibObjects 1 }
arrisMtaDevSetup OBJECT IDENTIFIER ::= { arrisMtaDevMibObjects 2 }
arrisMtaDevPowerSupplyTelemetry OBJECT IDENTIFIER ::= { arrisMtaDevMibObjects 3 }
arrisMtaDevLineCard OBJECT IDENTIFIER ::= { arrisMtaDevMibObjects 4 }
arrisMtaDispSignal OBJECT IDENTIFIER ::= { arrisMtaDevMibObjects 5 }
-- arrisMtaDevTest OBJECT IDENTIFIER ::= { arrisMtaDevMibObjects 5 }
arrisMtadocsQosService OBJECT IDENTIFIER ::= { arrisMtaDevMibObjects 6 }
arrisMtaDevMonitoringMib OBJECT IDENTIFIER ::= { arrisMtaDevBase 1 }
arrisMtaDevControl OBJECT IDENTIFIER ::= { arrisMtaDevMonitoringMib 1 }
arrisMtaDevTrace OBJECT IDENTIFIER ::= { arrisMtaDevMonitoringMib 2 }
arrisMtaDevParameters OBJECT IDENTIFIER ::= { arrisMtaDevMonitoringMib 3 }
arrisMtaDevVqm OBJECT IDENTIFIER ::= { arrisMtaDevMonitoringMib 4 }
arrisMtaDevDhcp OBJECT IDENTIFIER ::= { arrisMtaDevBase 2 }
-- Production groups
-- arrisMtaDevPermanentSetup OBJECT IDENTIFIER ::= { arrisMtaDevSetup 2 }
arrisMtaDevOperationalSetup OBJECT IDENTIFIER ::= { arrisMtaDevSetup 3 }
arrisMtaDevEndPntSetup OBJECT IDENTIFIER ::= { arrisMtaDevSetup 4 }
-- arrisMtaDevSalesSetup OBJECT IDENTIFIER ::= { arrisMtaDevSetup 4 }
arrisMtaDevOptionality OBJECT IDENTIFIER ::= { arrisMtaDevOperationalSetup 10 }
arrisMtaDevLoopVoltageMgmt OBJECT IDENTIFIER ::= { arrisMtaDevOperationalSetup 11 }
arrisMtaDevGainControl OBJECT IDENTIFIER ::= { arrisMtaDevOperationalSetup 12 }
arrisMtaDevLevelControl OBJECT IDENTIFIER ::= { arrisMtaDevOperationalSetup 40 }
arrisMtaDevDiag OBJECT IDENTIFIER ::= { arrisMtaDevOperationalSetup 15 }
arrisMtaDevCmIp OBJECT IDENTIFIER ::= { arrisMtaDevOperationalSetup 48 }
-- arrisMtaDevManufacturingTest OBJECT IDENTIFIER ::= { arrisMtaDevTest 2 }
-- arrisMtaDevOperationalTest OBJECT IDENTIFIER ::= { arrisMtaDevTest 3 }
--
-- The following group describes the Monitoring MIB control objects
-- in the Arris MTA device.
--
arrisMtaDevResetCallStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) will reset the following
objects to their default values:
arrisMtaDevRtpTxPktsTotal,
arrisMtaDevRtpRxPktsTotal,
arrisMtaDevRtpPercentPktsLostTotal,
arrisMtaDevSignalingAvgLatency,
arrisMtaDevSignalingTxSuccessfulMsgCnt,
arrisMtaDevSignalingRxSuccessfulMsgCnt,
arrisMtaDevSignalingTxNAKCnt,
arrisMtaDevSignalingRxNAKCnt,
arrisMtaDevSignalingRxNoACKCnt
Setting this object to false(2) will do nothing.
Reading this object always returns false(2)."
::= { arrisMtaDevControl 1 }
arrisMtaDevEnableCallpSigTrace OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to turn Callp signaling Message tracing
on in the SYSLOG. This option should be used with care as excessive
messaging could adversly affect performance. The default value is disable(0)."
::= { arrisMtaDevControl 2 }
arrisMtaDevEnableCallStatsSyslogRpt OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to enable end of call statistics reporting and
Callp signaling last message reporting to syslog. If this is set to enable(1),
then the end of call statistics will be reported in syslog messaging.
If arrisMtaDevEnableCallSigLastMsgRpt is enabled, then the last 4K of signaling
message will be reported in syslog messageing as well. If the set to
diable(0), then end of call statistics and the Callp last signaling
messages will not be reported in syslog messaging. The default value is disable(0)."
::= { arrisMtaDevControl 3 }
arrisMtaDevSwDnldNoSvcImpact OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
strictEnable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to control the firmware download service impact feature.
The value is kept in non-volatile storage. Operation is as follows:
disable(0) - Always download firmware and reboot immediately after firmware download.
enable(1) - Download firmware immediately but delay the reboot until all lines
are on-hook and no connections are active.
StrictEnable(2) - Do not download firmware if any phone endpoint is off hook."
::= { arrisMtaDevControl 4 }
arrisMtaDevEnableCallSigLastMsgRpt OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to enable or disable reporting of the Callp signaling
'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16. Together the sixteen MIB objects can contain a
signaling message as large as 4000 bytes. Each of the sixteen MIB objects will
contain a 255 byte segment of the message. If the message is too small to require
all sixteen MIBs then the empty MIB objects will display the value 'Buffer is empty'.
The default value is disable(0)."
::= { arrisMtaDevControl 5 }
arrisMtaDevNsadSwDnldStatus OBJECT-TYPE
SYNTAX INTEGER {
download-Idle (0),
download-Acceptance-In-Progress (1),
download-Application-Pending (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object is set to download-Idle upon startup and when the firmware download has completed. The download-Acceptance-In-Progress setting denots that the unit is currently downloading the firmware in the background. The download-Application-Pending state is set to indicate the load has been downloaded and accepted but is waiting to be applied. This MIB object is only valid if the arrisMtaDevSwDnldNoSvcImpact MIB object is set to enabled (1)."
DEFVAL { download-Idle }
::= { arrisMtaDevControl 6 }
arrisMtaDevRestoreNvmFactoryDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) will reset the NVM to default values:
Setting this object to false(2) will do nothing.
Reading this object always returns false(2)."
::= { arrisMtaDevControl 7 }
arrisMtaDevEnableLogging OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to enable or disable logging via the
NCS logger. Use arrisMtaDevLoggingContext to specify the desired
log type."
::= { arrisMtaDevControl 8 }
arrisMtaDevLoggingContext OBJECT-TYPE
SYNTAX INTEGER {
mgcp(0),
cm-dhcp(1),
mta-dhcp(2),
dsx(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object sets the logging context for reading logs via SNMP."
::= { arrisMtaDevControl 9 }
arrisMtaDevEnablePacketLossConcealment OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object sets enable/disable of the Packet loss concealment(PLC) via SNMP."
::= { arrisMtaDevControl 10 }
arrisMtaDevEnableRTCPStaticInterval OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object sets enable/disable of RTCP static interval via SNMP."
DEFVAL { disable }
::= { arrisMtaDevControl 11 }
--
-- The following group describes the Monitoring MIB trace objects
-- in the Arris MTA device.
--
arrisMtaDevRtpTxPktsTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the total number of RTP packets sent from the MTA
since it was last started up or reset. This value represents the total
number of packets sent for all endpoints combined. It is calculated from
values obtained from the signaling end of call statistics. Setting the MIB
object arrisMtaDevResetCallStats to a value of true(1) will clear this
counter."
::= { arrisMtaDevTrace 1 }
arrisMtaDevRtpRxPktsTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the total number of RTP packets received from the MTA
since it was last started up or reset. This value represents the total
number of packets received for all endpoints combined. It is calculated from
values obtained from the signaling end of call statistics. Setting the MIB
object arrisMtaDevResetCallStats to a value of true(1) will clear this
counter."
::= { arrisMtaDevTrace 2 }
arrisMtaDevRtpPercentPktsLostTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the percentage of RTP packets lost since the MTA was
last started up or reset. This value represents the total number of packets
lost for all endpoints combined. It is calculated from values obtained from
the signaling end of call statistics. Setting the MIB object
arrisMtaDevResetCallStats to a value of true(1) will clear this counter. The
value field for this MIB object is represented as an integer value. However,
the actual value is a floating point type. For example a returned (integer)
value of '1745' will be displayed as '1745' but the actual (floating point) value
would be '17.45%' packets lost. Note: The MSO must divide the integer return
value by 100 to calculate the percentage value."
::= { arrisMtaDevTrace 3 }
arrisMtaDevProvState OBJECT-TYPE
SYNTAX INTEGER {
dhcpBound(1),
dnsReqProvSvrIP(2),
kdcHostNameDnsReq(3),
kdcHostNameDnsRply(4),
kdcIpDnsReq(5),
kdcIpDnsRply(6),
asReqSent(7),
asRplyRcvd(8),
tgsReqSent(9),
tgsRplyRcvd(10),
apReqSent(11),
apRplyRcvd(12),
enrollmentInform(13),
cfgUrlSet(14),
dnsReqTftpSvrIp(15),
cfgFileReq(16),
rcvCfgFile(17),
syslogMsgProvComplete(18),
statusInform(19),
provcomplete(20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MIB object arrisMtaDevProvState reports the current provisioning state of the MTA."
::= { arrisMtaDevTrace 4 }
arrisMtaDevSWUpgradeStatus OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
completeFromProvisioning(2),
completeFromMgt(3),
failed(4),
other(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the current software upgrade status of the device.
This MIB object obtains its value from the MIB object docsDevSwOperStatus."
::= { arrisMtaDevTrace 5 }
arrisMtaDevSignalingAvgLatency OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the Average latency/delay for responses to signaling messages.
This is measured in milliseconds. It is calculated from values obtained from the
signaling end of call statistics. Setting the MIB object arrisMtaDevResetCallStats to
a value of true(1) will clear this MIB value."
::= { arrisMtaDevTrace 6 }
arrisMtaDevSignalingTxSuccessfulMsgCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the total number of successful signaling messages sent from the
MTA. Setting the MIB object arrisMtaDevResetCallStats to a value of true(1) will clear
this counter."
::= { arrisMtaDevTrace 7 }
arrisMtaDevSignalingRxSuccessfulMsgCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the total number of successful signaling messages received by the
MTA. Setting the MIB object arrisMtaDevResetCallStats to a value of true(1) will clear
this counter."
::= { arrisMtaDevTrace 8 }
arrisMtaDevSignalingTxNAKCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the total number of negative acknowledgement signaling
messages (NAKmessages) sent from the MTA. Setting the MIB object
arrisMtaDevResetCallStats to a value of true(1) will clear this counter."
::= { arrisMtaDevTrace 9 }
arrisMtaDevSignalingRxNAKCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the total number of negative acknowledgement signaling
messages (NAKmessages) received by the MTA. Setting the MIB object
arrisMtaDevResetCallStats to a value of true(1) will clear this counter."
::= { arrisMtaDevTrace 10 }
arrisMtaDevSignalingRxNoACKCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the total number of 'no acknowledgement' signaling messages
received by the MTA. Setting the MIB object arrisMtaDevResetCallStats to a value of
true(1) will clear this counter."
::= { arrisMtaDevTrace 11 }
arrisMtaDevSignalingLastMsg1 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 12 }
arrisMtaDevSignalingLastMsg2 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 13 }
arrisMtaDevSignalingLastMsg3 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 14 }
arrisMtaDevSignalingLastMsg4 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 15 }
arrisMtaDevSignalingLastMsg5 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 16 }
arrisMtaDevSignalingLastMsg6 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 17 }
arrisMtaDevSignalingLastMsg7 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 18 }
arrisMtaDevSignalingLastMsg8 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 19 }
arrisMtaDevSignalingLastMsg9 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 20 }
arrisMtaDevSignalingLastMsg10 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 21 }
arrisMtaDevSignalingLastMsg11 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 22 }
arrisMtaDevSignalingLastMsg12 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 23 }
arrisMtaDevSignalingLastMsg13 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 24 }
arrisMtaDevSignalingLastMsg14 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 25 }
arrisMtaDevSignalingLastMsg15 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 26 }
arrisMtaDevSignalingLastMsg16 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object displays a 255 byte segment of the Callp last signaling message sent or received.
This MIB object is one of sixteen total MIB objects which together can display a signaling message
as large as 4000 bytes. If the message is too small to require all sixteen MIBs then the empty MIB
objects will display the value 'Buffer is empty'. This MIB object must be enabled in order to display
messages. The MIB object arrisMtaDevEnableCallSigLastMsgRpt is used to enable or disable reporting
of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through
arrisMtaDevSignalingLastMsg16."
::= { arrisMtaDevTrace 27 }
arrisMtaDevEstimatedMinutesRemaining OBJECT-TYPE
SYNTAX INTEGER
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the time to battery charge depletion
under the present load conditions if the utility power
is off and remains off, or if it were to be lost and
remain off. A value of -1 indicates the information
is unavailable at this time."
::= { arrisMtaDevTrace 44 }
arrisMtaDevEstimatedChargeRemaining OBJECT-TYPE
SYNTAX INTEGER
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the battery charge remaining expressed
as a percent of full charge. A value of -1 indicates
the information is unavailable at this time."
::= { arrisMtaDevTrace 45 }
--
-- The following group describes the Monitoring MIB Call Stats Table objects
-- in the Arris MTA device.
--
arrisMtaDevCallStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDevCallStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reports various end of call statistics."
::= { arrisMtaDevTrace 46 }
arrisMtaDevCallStatsEntry OBJECT-TYPE
SYNTAX ArrisMtaDevCallStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each end point entry represents one telephone line"
INDEX { arrisMtaDevCallStatsIndex }
::= { arrisMtaDevCallStatsTable 1 }
ArrisMtaDevCallStatsEntry ::= SEQUENCE {
arrisMtaDevCallStatsIndex Integer32,
arrisMtaDevCallStatsRtpTxPkts Integer32,
arrisMtaDevCallStatsRtpRxPkts Integer32,
arrisMtaDevCallStatsRtpPercentPktsLost Integer32,
arrisMtaDevCallStatsAvgJitter Integer32,
arrisMtaDevCallStatsMaxJitter Integer32,
arrisMtaDevCallStatsAvgLatency Integer32,
arrisMtaDevCallStatsHookStatus INTEGER,
arrisMtaDevCallStatsSLICStatus INTEGER,
arrisMtaDevCallStatsEndPntOpStatus INTEGER,
arrisMtaDevCallStatsLineSubState BITS
}
arrisMtaDevCallStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique value which identifies the endpoint."
::= { arrisMtaDevCallStatsEntry 1 }
arrisMtaDevCallStatsRtpTxPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the total number of RTP packets sent from
the MTA during the most recent call. This MIB object is included
in a table of MIB objects which indexed by the endpoint (line number).
Its value represents the total number of packets sent per endpoint.
This value is obtained from the signaling end of call statistics."
::= { arrisMtaDevCallStatsEntry 2 }
arrisMtaDevCallStatsRtpRxPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the total number of RTP packets received by
the MTA during the most recent call. This MIB object is included
in a table of MIB objects which indexed by the endpoint (line number).
Its value represents the total number of packets received per endpoint.
This value is obtained from the signaling end of call statistics."
::= { arrisMtaDevCallStatsEntry 3 }
arrisMtaDevCallStatsRtpPercentPktsLost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the percentage of RTP packets lost during the most
recent call. This MIB object is included in a table of MIB objects which
indexed by the endpoint (line number). Its value represents the total number
of packets lost per endpoint. It is calculated from values obtained from the
signaling end of call statistics. The value field for this MIB object is
represented as an integer value. However, the actual value is a floating point
type. For example A returned (integer) value of '1745' will be displayed as
'1745' but the actual (floating point) value would be '17.45%' packets lost.
Note: The MSO must divide the integer return value by 100 to calculate the
percentage value."
::= { arrisMtaDevCallStatsEntry 4 }
arrisMtaDevCallStatsAvgJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the average jitter measurement during the most recent call.
This MIB object is included in a table of MIB objects which indexed by the endpoint
(line number). Its value represents the average jitter measurement per endpoint.
This value is measured in units of milliseconds. This value is obtained from the
signaling end of call statistics."
::= { arrisMtaDevCallStatsEntry 5 }
arrisMtaDevCallStatsMaxJitter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the maximum jitter measurement during the most recent call.
This MIB object is included in a table of MIB objects which indexed by the endpoint
(line number). Its value represents the maximum jitter measurement per endpoint.
This value is measured in units of milliseconds. This value is obtained from DSP
statistics."
::= { arrisMtaDevCallStatsEntry 6 }
arrisMtaDevCallStatsAvgLatency OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the average latency observed during the most recent call.
This MIB object is included in a table of MIB objects which indexed by the endpoint
(line number). This value is measured in units of milliseconds. This value is
obtained from the signaling end of call statistics."
::= { arrisMtaDevCallStatsEntry 7 }
arrisMtaDevCallStatsHookStatus OBJECT-TYPE
SYNTAX INTEGER {
onHook(0),
offHook(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the hook status for each endpoint.
Note: The disconnected state is not a valid return value for this MIB object."
::= { arrisMtaDevCallStatsEntry 9 }
arrisMtaDevCallStatsSLICStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
overtemp(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the over temperature condition of the SLIC chips."
::= { arrisMtaDevCallStatsEntry 10 }
arrisMtaDevCallStatsEndPntOpStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the current operational status for each endpoint.
This MIB object obtains its value from the MIB object ifAdminOperStatus."
::= { arrisMtaDevCallStatsEntry 11 }
arrisMtaDevCallStatsLineSubState OBJECT-TYPE
SYNTAX BITS {
normal(0),
diagsPending(1),
diagsFailed(2),
lcProtection(3),
dspFail(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the current sub state for each line.
This MIB object obtains its value from the lineRec."
::= { arrisMtaDevCallStatsEntry 12 }
arrisMtaDevRtpPktsLostTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the RTP packets lost since the MTA was
last started up or reset. This value represents the total number of packets
lost for all endpoints combined. It is calculated from values obtained from
the signaling end of call statistics. Setting the MIB object
arrisMtaDevResetCallStats to a value of true(1) will clear this counter."
::= { arrisMtaDevTrace 47 }
arrisMtaDevLastCallStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the last call start time from the eMTA. "
::= { arrisMtaDevTrace 48 }
arrisMtaDevLastCallEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reports the last call end time from the eMTA. "
::= { arrisMtaDevTrace 49 }
--
-- The following group describes Voice Quality Monitoring objects
-- in the Arris MTA device.
--
arrisMtaDevVqmLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the line for Voice Quality Metrics reporting."
DEFVAL { 1 }
::= { arrisMtaDevVqm 1 }
arrisMtaDevVqmClear OBJECT-TYPE
SYNTAX INTEGER {
single-line(0),
all-lines(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears Voice Quality Metrics for a single line or for all lines.
Line number is specified using arrisMtaDevVqmLine."
DEFVAL { single-line }
::= { arrisMtaDevVqm 2 }
arrisMtaDevVqmEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Disables recording Local Voice Metrics."
DEFVAL { enable }
::= { arrisMtaDevVqm 3 }
arrisMtaDevVqmCallNumberTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDevVqmCallNumberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Voice Quality Metric history on a per call number basis. This table
provides call number history identifiers that can be entered into
arrisMtaDevVqmIdent to provide statistics for a particular call number."
::= { arrisMtaDevVqm 4 }
arrisMtaDevVqmCallNumberEntry OBJECT-TYPE
SYNTAX ArrisMtaDevVqmCallNumberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Voice Quality Metric history on a per call number basis."
INDEX { arrisMtaDevVqmCallNumberIndex }
::= { arrisMtaDevVqmCallNumberTable 1 }
ArrisMtaDevVqmCallNumberEntry ::= SEQUENCE {
arrisMtaDevVqmCallNumberIndex Integer32,
arrisMtaDevVqmCallNumberIds DisplayString }
arrisMtaDevVqmCallNumberIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A unique value which identifies the call number."
::= { arrisMtaDevVqmCallNumberEntry 1 }
arrisMtaDevVqmCallNumberIds OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays a history of Call number identifiers for the specified line."
::= { arrisMtaDevVqmCallNumberEntry 2 }
arrisMtaDevVqmCallNumberIdentifier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the call number for Voice Quality Metrics reporting. Valid Ids
to be entered here are obtained from arrisMtaDevVqmCallNumberIds."
DEFVAL { 1 }
::= { arrisMtaDevVqm 5 }
arrisMtaDevVqmMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDevVqmMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Voice Quality Metrics pertaining to a particular call number."
::= { arrisMtaDevVqm 6 }
arrisMtaDevVqmEnableRemote OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
forceDisable(1),
forceEnable(2),
default(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines policy to control Remote Voice Metrics (XR). The value of
this MIB is persistent if it is set after configuration.
When set to 'default', the value is restored to the default value, and it
is no longer persistent.
forceDisable - disables XR. Overrides directive from Call Server.
forceEnable - enables XR. Overrides directive from Call Server.
normal - has no effect. Call Server Directives are obeyed.
default - use the default value. The MIB is reset to the default value,
and the corresponding value in NVM is cleared."
DEFVAL { normal }
::= { arrisMtaDevVqm 7 }
arrisMtaDevVqmThresholdEnable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Zero Disables threshold reporting for Voice Metrics. Non-zero specifies the
maximum number of logs allowed to be sent to report when a threshold is
exceeded. The more logs that are allowed, the more metrics that can be
reported. Metrics are reported in the order specified in
arrisMtaDevVqmMetricIndex. To minimize network traffic, logs are sent only
when a threshold is first exceeded. Thereafter until the metric returns to
normal, logs are inhibited. To change this operation to send logs each
time the threshold is exceeded, add 100 to the MIB value. "
DEFVAL { 0 }
::= { arrisMtaDevVqm 8 }
arrisMtaDevVqmHistorySize OBJECT-TYPE
SYNTAX Integer32 (2..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The history size of Vqm record. Range 2 to 50."
DEFVAL { 10 }
::= { arrisMtaDevVqm 9 }
arrisMtaDevVqmCallNumberIdentifierLastCall OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last call identifier for Voice Quality Metrics reporting."
::= { arrisMtaDevVqm 10 }
arrisMtaDevVqmMetricEntry OBJECT-TYPE
SYNTAX ArrisMtaDevVqmMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Voice Quality Metrics pertaining to a particular call number."
INDEX { arrisMtaDevVqmMetricIndex }
::= { arrisMtaDevVqmMetricTable 1 }
ArrisMtaDevVqmMetricEntry ::= SEQUENCE {
arrisMtaDevVqmMetricIndex INTEGER,
arrisMtaDevVqmMetricValues DisplayString,
arrisMtaDevVqmThresholds DisplayString }
-- When metrics are added/deleted make sure the values VQMETRIC_COMMON_MAX,
-- VQMETRIC_LOCAL_MAX & VQMETRIC_REMOTE_MAX are updated in callp_vqmon.h
--
arrisMtaDevVqmMetricIndex OBJECT-TYPE
SYNTAX INTEGER {
-- Common Metrics
callEndTime(1),
callStartTime(2),
callDuration(3),
lineNumber(4),
remIpAddress(5),
cwErrors(6),
cwErrorRate(7),
dsSNR(8),
microReflections(9),
dsPwr(10),
usPwr(11),
eqiAverage(12),
eqiMin(13),
eqiMax(14),
eqiInstantaneous(15),
-- Local Metrics
mOS-LQ(16),
mOS-CQ(17),
rERL(18),
signalLevel(19),
noiseLevel(20),
lossRate(21),
plConcealment(22),
discardRate(23),
burstDensity(24),
gapDensity(25),
burstDuration(26),
gapDuration(27),
rTDelay(28),
endSystemDelay(29),
minGapSize(30),
rFactor(31),
extRFactor(32),
jbAdaptive(33),
jbRate(34),
jBNomDelay(35),
jBMaxDelay(36),
jBAbsMaxDelay(37),
-- Remote Metrics
mOS-LQRem(38),
mOS-CQRem(39),
rERLRem(40),
signalLevelRem(41),
noiseLevelRem(42),
lossRateRem(43),
plConcealmentRem(44),
discardRateRem(45),
burstDensityRem(46),
gapDensityRem(47),
burstDurationRem(48),
gapDurationRem(49),
rTDelayRem(50),
endSystemDelayRem(51),
minGapSizeRem(52),
rFactorRem(53),
extRFactorRem(54),
jbAdaptiveRem(55),
jbRateRem(56),
jBNomDelayRem(57),
jBMaxDelayRem(58),
jBAbsMaxDelayRem(59),
-- New Local Metrcs
txPackets(60),
txOctets(61),
rxPackets(62),
rxOctets(63),
packetLoss(64),
intervalJitter(65),
originator(66),
intervalJitterRem(67),
txcodec(68),
rxcodec(69)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A unique value which identifies the metric."
::= { arrisMtaDevVqmMetricEntry 1 }
arrisMtaDevVqmMetricValues OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays metrics for the specified call number."
::= { arrisMtaDevVqmMetricEntry 2 }
arrisMtaDevVqmThresholds OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets/displays metric thresholds."
::= { arrisMtaDevVqmMetricEntry 3 }
-- The follow MIB OID is used on Dev0 and should be reserved
-- ::= { arrisMtaDevCallStatsEntry 12 }
-- The following group describes the Monitoring MIB parameter objects
-- on the Arris MTA device.
--
arrisMtaDevMaxCpeAllowed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reflects the 'MaxCpeAllowed' parameter in the CM config file."
::= { arrisMtaDevParameters 1 }
arrisMtaDevNetworkAccess OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reflects the value of the 'NetworkAccess' parameter set in the CM config file."
::= { arrisMtaDevParameters 2 }
--
-- The following group describes the Monitoring MIB Line Parameter Table objects
-- on the Arris MTA device.
--
arrisMtaDevLineParameterTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDevLineParameterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reports various line parameters on the eMTA."
::= { arrisMtaDevParameters 3 }
arrisMtaDevLineParameterEntry OBJECT-TYPE
SYNTAX ArrisMtaDevLineParameterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each end point entry represents one telephone line"
INDEX { arrisMtaDevInterfaceIndex }
::= { arrisMtaDevLineParameterTable 1 }
ArrisMtaDevLineParameterEntry ::= SEQUENCE {
arrisMtaDevInterfaceIndex Integer32,
arrisMtaDevPktcDevEvEndpointName SnmpAdminString,
arrisMtaDevActiveConnections Integer32,
arrisMtaDevLineMWIActive TruthValue
}
arrisMtaDevInterfaceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows the corresponding ifTable ifindex object for a particular line."
::= { arrisMtaDevLineParameterEntry 1 }
arrisMtaDevPktcDevEvEndpointName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object provides the endpoint name in the following format: 'AALN/X:FQDN/IP Address'."
::= { arrisMtaDevLineParameterEntry 2 }
arrisMtaDevActiveConnections OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows the number of connections for a particular line whose mode is receive only, send only, send/receive, but not inactive."
::= { arrisMtaDevLineParameterEntry 3 }
arrisMtaDevLineMWIActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows the MWI is active or not."
::= { arrisMtaDevLineParameterEntry 4 }
--
-- The following group describes the Monitoring MIB Upstream Service Flow Parameter Table objects
-- in the Arris MTA device.
--
arrisMtaDevUpSvcFlowParameterTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDevUpSvcFlowParameterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reports various Upstream Service Flow parameters on the eMTA."
::= { arrisMtaDevParameters 4 }
arrisMtaDevUpSvcFlowParameterEntry OBJECT-TYPE
SYNTAX ArrisMtaDevUpSvcFlowParameterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each end point entry represents one upstream service flow index"
INDEX { arrisMtaDevDocsQosParamUpSvcFlowSFID }
::= { arrisMtaDevUpSvcFlowParameterTable 1 }
ArrisMtaDevUpSvcFlowParameterEntry ::= SEQUENCE {
arrisMtaDevDocsQosParamUpSvcFlowSFID Integer32,
arrisMtaDevDocsQosParamUpSvcFlowSchedulingType Integer32
}
arrisMtaDevDocsQosParamUpSvcFlowSFID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows the corresponding upstream service flow SFID for a valid service flow index."
::= { arrisMtaDevUpSvcFlowParameterEntry 1 }
arrisMtaDevDocsQosParamUpSvcFlowSchedulingType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object shows the corresponding upstream service flow scheduling type for a valid service flow index."
::= { arrisMtaDevUpSvcFlowParameterEntry 2 }
arrisMtaDevQosMode OBJECT-TYPE
SYNTAX INTEGER {
dsxMode (1),
bestEffort-FullDQos-PCMM (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object reflects the CPFS_DSX_DQOS bit of the Callp Feature Switch setting."
::= { arrisMtaDevParameters 5 }
arrisMtaDevEventFormat OBJECT-TYPE
SYNTAX INTEGER {
pktc10 (0),
pktc15 (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to determine which packet cable event format we are using:
pktc10(0): pktc 1.0 event,
pktc15(1): pktc 1.5 event."
::= { arrisMtaDevParameters 6 }
--
-- The following group describes the Dhcp parameters objects
-- in the Arris MTA device.
--
arrisMtaDevDhcpMtaParameters OBJECT IDENTIFIER ::= { arrisMtaDevDhcp 1 }
arrisMtaDevDhcpSvrParameters OBJECT IDENTIFIER ::= { arrisMtaDevDhcp 2 }
arrisMtaDevDhcpLeaseParameters OBJECT IDENTIFIER ::= { arrisMtaDevDhcp 3 }
arrisMtaDevDhcpPktcOptParameters OBJECT IDENTIFIER ::= { arrisMtaDevDhcp 4 }
arrisMtaDevDhcpMtaIpFQDN OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the currently defined MTA FQDN."
::= { arrisMtaDevDhcpMtaParameters 1 }
arrisMtaDevDhcpMtaIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the currently leased IP address ."
::= { arrisMtaDevDhcpMtaParameters 2 }
arrisMtaDevDhcpMtaSubNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the current IP subnet mask in use."
::= { arrisMtaDevDhcpMtaParameters 3 }
arrisMtaDevDhcpMtaGatewayIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the current IP gateway address in use."
::= { arrisMtaDevDhcpMtaParameters 4 }
arrisMtaDevDhcpMtaConfigFile OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the MTA configuration file to be retrived."
::= { arrisMtaDevDhcpMtaParameters 5 }
arrisMtaDevDhcpState OBJECT-TYPE
SYNTAX INTEGER {
idle (0), -- MTA is waiting to start the DHCP process.
discover (1), -- MTA is currently trying to discover its IP address.
selecting (2), -- MTA is currently trying to select its IP address.
requesting(3), -- MTA is currently trying to request its IP address.
bound (4), -- IP Address is leased and no rebind/renew operation is taking place.
renew (5), -- MTA is currently trying to renew its IP address.
rebind (6) -- MTA is currently trying to rebind its IP address.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the current Dhcp state of the MTA."
::= { arrisMtaDevDhcpSvrParameters 1 }
arrisMtaDevDhcpPrimaryDhcpSvrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the primary Dhcp server address."
::= { arrisMtaDevDhcpSvrParameters 2 }
arrisMtaDevDhcpSecondaryDhcpSvrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the secondary Dhcp server address."
::= { arrisMtaDevDhcpSvrParameters 3 }
arrisMtaDevDhcpPrimaryDNSSvrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the primary DNS server address."
::= { arrisMtaDevDhcpSvrParameters 4 }
arrisMtaDevDhcpSecondaryDNSSvrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the secondary DNS server address."
::= { arrisMtaDevDhcpSvrParameters 5 }
arrisMtaDevDhcpOfferedLeaseTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the current IP Lease time expressed in seconds."
::= { arrisMtaDevDhcpLeaseParameters 1 }
arrisMtaDevDhcpLeaseTimeRemaining OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the remaining IP Lease time expressed in seconds."
::= { arrisMtaDevDhcpLeaseParameters 2 }
arrisMtaDevDhcpTimeUntilRenew OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the current time remaining before the MTA starts the lease renewal
process. This time is expressed in seconds."
::= { arrisMtaDevDhcpLeaseParameters 3 }
arrisMtaDevDhcpTimeUntilRebind OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the current time remaining before the MTA starts the lease rebinding
process. This time is expressed in seconds."
::= { arrisMtaDevDhcpLeaseParameters 4 }
arrisMtaDevDhcpPktcOptionId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This displays the Pktc DHCP Option ID of 122/177."
::= { arrisMtaDevDhcpPktcOptParameters 1 }
arrisMtaDevDhcpSvcProviderSnmpEntity OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current FQDN of the Service Provider's SNMP Entity."
::= { arrisMtaDevDhcpPktcOptParameters 2 }
arrisMtaDevDhcpKerberosRealmFqdn OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FQDN of the Kerberos Realm. The PacketCable architecture requires an
MTA to authenticate itself to the TSP's network via the Kerberos protocol.
A Kerberos Realm name is required at the MTA to permit a DNS lookup for the
address of the TSP's Kerberos Key Distribution Center (KDC) entity."
::= { arrisMtaDevDhcpPktcOptParameters 3 }
arrisMtaDevDhcpRequestTgt OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This sub-option encodes a boolean value which indicates whether an
MTA should or should not utilize a TGT (Ticket Granting Ticket) when
obtaining a service ticket for one of the PacketCable application
servers.
TRUE : Utilize the TGT process.
FALSE: Do not utilize the TGT process."
::= { arrisMtaDevDhcpPktcOptParameters 4 }
arrisMtaDevDhcpProvTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The provisioning timer defines the maximum time allowed for the MTA
provisioning process to complete. If this timer expires before the
MTA has completed the provisioning process, the MTA should reset the
timer and re-start its provisioning process from the beginning."
::= { arrisMtaDevDhcpPktcOptParameters 5 }
arrisMtaDevDhcpSecTicketInvalid OBJECT-TYPE
SYNTAX BITS {
invalidateProvOnReboot (0),
invalidateAllCmsOnReboot (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object defines a Kerberos Ticket Control Mask that
instructs the MTA to invalidate the specific application
server Kerberos ticket(s) that are stored locally in the
MTA NVRAM (non-volatile or persistent memory).
If the MTA does not stored Kerberos tickets in NVRAM, it
MUST ignore setting of this object, and MUST report a BITS
value of zero when the object is read.
If the MTA supports Kerberos tickets storage in NVRAM, the
object value is encoded as follows:
- setting the invalidateProvOnReboot bit (bit 0) to 1
means that the MTA MUST invalidate the Kerberos
Application Ticket(s) for the Provisioning Application
at the next MTA reboot,
- setting the invalidateAllCmsOnReboot bit (bit 1) to 1
means that the MTA MUST invalidate the Kerberos
Application Ticket(s) for all CMSes currently assigned
to the MTA endpoints."
::= { arrisMtaDevDhcpPktcOptParameters 6 }
--
-- The following group describes the Power Supply Telemetry objects
-- in the Arris MTA device.
--
arrisMtaDevPwrSupplyBase OBJECT IDENTIFIER ::= { arrisMtaDevPowerSupplyTelemetry 2 }
arrisMtaDevPwrSupplyControl OBJECT IDENTIFIER ::= { arrisMtaDevPowerSupplyTelemetry 3 }
arrisMtaDevPwrSupplyTimers OBJECT IDENTIFIER ::= { arrisMtaDevPowerSupplyTelemetry 4 }
arrisMtaDevPwrSupplyStats OBJECT IDENTIFIER ::= { arrisMtaDevPowerSupplyTelemetry 5 }
arrisMtaDevPwrSupplyAlarm OBJECT IDENTIFIER ::= { arrisMtaDevPowerSupplyTelemetry 6 }
--
-- The following describes the line card tabl and entry that displays the state of the
-- line cards. Objects are in the Arris MTA device.
--
arrisMtaDevLineCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDevLineCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the state of each line card."
::= { arrisMtaDevLineCard 1 }
arrisMtaDevLineCardEntry OBJECT-TYPE
SYNTAX ArrisMtaDevLineCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the line card table."
INDEX { arrisMtaDevLineCardLineNumber }
::= { arrisMtaDevLineCardTable 1 }
ArrisMtaDevLineCardEntry ::= SEQUENCE{
arrisMtaDevLineCardLineNumber Integer32, -- INDEX item
arrisMtaDevLineCardState INTEGER
}
arrisMtaDevLineCardLineNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique value which identifies the line card."
::= { arrisMtaDevLineCardEntry 1 }
arrisMtaDevLineCardState OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
addressing (2),
talking (3),
frwd-disc (5),
ringing (6),
onhook-tx (7),
plo (14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The line card state of the line."
::= { arrisMtaDevLineCardEntry 2 }
-- Ali PD 78887 END
-- PD 189252
arrisMtaDispSignalTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDispSignalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the NCS/SIP log"
::= { arrisMtaDispSignal 1 }
arrisMtaDispSignalEntry OBJECT-TYPE
SYNTAX ArrisMtaDispSignalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the log table."
INDEX { arrisMtaDevDispSignalLogindex }
::= { arrisMtaDispSignalTable 1 }
ArrisMtaDispSignalEntry ::= SEQUENCE{
arrisMtaDevDispSignalLogindex INTEGER,
arrisMtaDevDispSignalLog OCTET STRING
}
arrisMtaDevDispSignalLogindex OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of signal log."
::= { arrisMtaDispSignalEntry 1 }
arrisMtaDevDispSignalLog OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Show the log of signal"
::= { arrisMtaDispSignalEntry 2 }
arrisMtadocsQosServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtadocsQosServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the NCS/SIP log"
::= { arrisMtadocsQosService 1 }
arrisMtadocsQosServiceEntry OBJECT-TYPE
SYNTAX ArrisMtadocsQosServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Mta Qos log table."
INDEX { arrisMtadocsQosServiceIndex }
::= { arrisMtadocsQosServiceTable 1 }
ArrisMtadocsQosServiceEntry ::= SEQUENCE{
arrisMtadocsQosServiceIndex INTEGER,
arrisMtadocsQosServiceFlowID INTEGER,
arrisMtadocsQosServiceClassName OCTET STRING,
arrisMtdocsQosServiceFlowDirection OCTET STRING,
arrisMtdocsQosServicePrimaryFlow OCTET STRING,
arrisMtadocsQosTrafficType OCTET STRING,
arrisMtadocsQosServicePackets INTEGER
}
arrisMtadocsQosServiceIndex OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of mta qos entry."
::= { arrisMtadocsQosServiceEntry 1 }
arrisMtadocsQosServiceFlowID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "mta qos service flow id."
::= { arrisMtadocsQosServiceEntry 2 }
arrisMtadocsQosServiceClassName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "mta qos service class name."
::= { arrisMtadocsQosServiceEntry 3 }
arrisMtdocsQosServiceFlowDirection OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "mta qos service flow direction."
::= { arrisMtadocsQosServiceEntry 4 }
arrisMtdocsQosServicePrimaryFlow OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "mta qos service primary flow"
::= { arrisMtadocsQosServiceEntry 5 }
arrisMtadocsQosTrafficType OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "mta qos traffic type."
::= { arrisMtadocsQosServiceEntry 6 }
arrisMtadocsQosServicePackets OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Packets belong to the service."
::= { arrisMtadocsQosServiceEntry 7 }
arrisMtadocsQosDisableLoggin OBJECT-TYPE
SYNTAX INTEGER{
disableLoggin (1),
enableLoggin (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "disable mta qos log collecting."
::= { arrisMtadocsQosService 2 }
arrisMtadocsQosLogClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear mta qos log. Always return true if get the value of this mib"
::= { arrisMtadocsQosService 3 }
arrisMtadocsQosShowDsxLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtadocsQosShowDsxLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the DSX log"
::= { arrisMtadocsQosService 4 }
arrisMtadocsQosShowDsxLogEntry OBJECT-TYPE
SYNTAX ArrisMtadocsQosShowDsxLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the log table."
INDEX { arrisMtadocsQosShowDsxLogIndex }
::= { arrisMtadocsQosShowDsxLogTable 1 }
ArrisMtadocsQosShowDsxLogEntry ::= SEQUENCE{
arrisMtadocsQosShowDsxLogIndex INTEGER,
arrisMtadocsQosShowDsxLog OCTET STRING
}
arrisMtadocsQosShowDsxLogIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of signal log."
::= { arrisMtadocsQosShowDsxLogEntry 1 }
arrisMtadocsQosShowDsxLog OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Show the log of dsx"
::= { arrisMtadocsQosShowDsxLogEntry 2 }
-- PD 189252 end
arrisMtaDevOptionality8ChnlKey OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"When correct key is entered, 8 channel DSP operation can be enabled using
arrisMtaDevOptionality8ChnlEnable mib."
::= { arrisMtaDevOptionality 1 }
arrisMtaDevOptionality8ChnlEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
enabled-needs-to-be-reset(3),
disabled-needs-to-be-reset(4)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Enable or Disable 8 channel DSP operation. Enabling requires presence
of a valid 8 Channel DSP Key. This key is entered via the
arrisMtaDevOptionality8ChnlKey MIB. When an Enable or Disable action
is invoked, a reset of the unit is required before the action becomes
effective. Until the reset occurs this MIB indicates the need for a
reset by displaying a status which includes _needs_to_be_reset. Note
that _needs_to_be_reset status values are not valid inputs to this MIB.
Valid MIB inputs are enabled(1) and disabled(2)"
::= { arrisMtaDevOptionality 2 }
arrisMtaDevOptionalityLoopDiagKey OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"When correct key is entered, Loop Diag can be performed."
::= { arrisMtaDevOptionality 3 }
arrisMtaDevLoopVoltageKey OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When correct key is entered, Loop Voltage Mgmt. policy can be set.
This MIB is only writable via configuration file."
::= { arrisMtaDevLoopVoltageMgmt 1 }
arrisMtaDevLoopVoltagePolicy OBJECT-TYPE
SYNTAX INTEGER {
always-voltage-present(1),
rf-carrier-voltage-present(2),
in-service-voltage-present(3),
default-operation(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1. Maintain loop idle voltage at all times.
2. Apply loop idle voltage at all times except when no RF QAM carrier is
detected. The intent of this policy option is to maintain idle
voltage for all normal operation but to remove it if RF conditions
appear to match a malicious cable cut (such may happen if a burglar is
trying to disable the alarm system).
3. Apply loop idle voltage only when the MTA device is In-service (MTA IP
address is received and valid config file has been received) and during
manually initiated resets (either reset button or SNMP). If this policy
criterion is selected, then the EMTA MUST maintain loop idle voltage if a
reset command is received (via SNMP or reset button or as part of a
management initiated software upgrade). Once the MTA has come back in-
service, any subsequent MTA out-of-service condition MUST result in
removal of loop idle voltage (except for another manually initiated reset).
As a failsafe, if the MTA has not come in-service within a provisionable
time, then loop idle voltage MUST be removed.
4. Apply loop idle voltage whenever the MTA device is in-service.
5. This MIB is only writable via configuration file."
DEFVAL { default-operation }
::= { arrisMtaDevLoopVoltageMgmt 2 }
arrisMtaDevLoopVoltageResetTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time after which to remove loop voltage if the MTA has not come
in-service. Acceptable range is 8-1800 seconds. Stored value must be divisible
by 8 (any remainder will be discarded). See arrisMtaDevLoopVoltagePolicy 3 for
operational details.
This MIB is only writable via configuration file.
For D11PLUS builds, values from 8 through 32 will be multiplied by 3."
DEFVAL { 300 } -- ( = 5 minutes )
::= { arrisMtaDevLoopVoltageMgmt 3 }
arrisMtaDevLoopVoltageMaintTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time that loop voltage will be supplied regardless of RF condition.
See arrisMtaDevLoopVoltagePolicy for more detailed information.
This MIB is only writable via configuration file."
DEFVAL { 0 } -- ( = 0 minutes )
::= { arrisMtaDevLoopVoltageMgmt 4 }
arrisMtaDevVPNomJitterBuffer OBJECT-TYPE
SYNTAX INTEGER {
packetizationRatex1(1),
packetizationRatex2(2),
packetizationRatex3(3),
packetizationRatex4(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Voice Playout nominal jitter buffer."
DEFVAL { packetizationRatex1 }
::= { arrisMtaDevOperationalSetup 1 }
arrisMtaDevVPJitterBufferMode OBJECT-TYPE
SYNTAX INTEGER {
adaptive(1),
fixed(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Voice Playout jitter buffer mode."
DEFVAL { adaptive }
::= { arrisMtaDevOperationalSetup 2 }
arrisMtaDevRTPTxQueueSize OBJECT-TYPE
SYNTAX INTEGER(2..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the RTP transmit queue size."
DEFVAL { 20 }
::= { arrisMtaDevOperationalSetup 3 }
arrisMtaDevEchoCancellerTailLength OBJECT-TYPE
SYNTAX INTEGER {
eightMs(1),
thirtyTwoMs(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the length in milliseconds of the echo canceller tail. This object
is only settable during the processing of the MTA config file."
DEFVAL { thirtyTwoMs }
::= { arrisMtaDevOperationalSetup 4 }
arrisMtaDevDspHandleNonPhaseReversedTone OBJECT-TYPE
SYNTAX INTEGER {
off(1),
onECANEnable(2),
onECANDisabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set handling the DSP non phase reversed tone detection for modem. A value of
off(1) indicates the tone will not be handled. A default value of onECANEnable(2)
indicates the modem non phase reversed CED tone will be handled with echo canceller
enabled. A value of onECANDisabled(3) indicates the modem non phase reversed CED
tone will be handled with echo canceller disabled."
DEFVAL { onECANEnable }
::= { arrisMtaDevOperationalSetup 5 }
-- [ARRIS NOTE: For the published (publicly available) MIB, the MAX-ACCESS clause for
-- the 'arrisCmDevProvMethodIndicator' object should have a value of 'read-only'.]
arrisMtaDevProvMethodIndicator OBJECT-TYPE
SYNTAX ArrsMtaDevProvMethod
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the method used to provision the device. This object should only be
changed by the configuration file. The following provisioning methods are supported:
docsisOnly(0) - DOCSIS-only provisioning
fullPacketCable(1) - PacketCable 1.5 Flows. See
arrisMtaDevPacketcableProvisioningFlow for which
flow we are using.
packetCableMinusKDC(2) - same as 'fullPacketCable', except with IPSEC and
SNMPv3 disabled
cps(3) - compatible with CPS2000 (SNMPv2; IPSEC disabled)
gupi(4) - SNMPv2, with no SNMP Informs and IPSEC disabled
singleMAC(5) - single config file (SNMPv2, single IP address,
single MAC address, no SNMP Informs, IPSEC disabled
basic1(6) - Basic1 SNMPv2, without the SNMP Enrollment, Status Informs
or Hash
basic2(7) - ARRIS Basic2 SNMPv2, without the SNMP Enrollment Inform or
Hash
gupiEncryptedMtaConfig(8) - Same as gupi(4) above with the MTA config file encrypted
using an Arris proprietary method.
gupiMacMta(9) - gupi provisioning that uses MTA MAC address as the MTA config
file name. (ie- 1337c0ded00d.bin)
gupiEncryptedMacMta(10) - gupi encrypted mta config provisioning that uses MTA MAC address
as the MTA config file name. (ie- 1337c0ded00d.bin)
gupiTftpSvrOverride(11) - gupi provisioning where the FQDN of the MTA TFTP server is expected to
be present in the MIB arrisMtaDevTFTPServerAddrOverrideFQDN"
::= { arrisMtaDevOperationalSetup 6 }
arrisMtaCfgRTPDynPortStart OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This defines the starting value for a range of ports that will be used dynamically
when sending out SIP RTP voice packets. This MIB and arrisMtaCfgRTPDynPortEnd
are to be used together.
The range limit is 1024-65535. Where arrisMtaCfgRTPDynPortStart can be 1024 and
arrisMtaCfgRTPDynPortEnd can be 65535. The default range is 49152-65535.
However it should be noted that the IANA defines the following ranges:
The Well Known Ports are those from 0 through 1023.
The Registered Ports are those from 1024 through 49151.
The Dynamic and/or Private Ports are those from 49152 through 65535."
::= { arrisMtaDevOperationalSetup 7 }
arrisMtaCfgRTPDynPortEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This defines the starting value for a range of ports that will be used dynamically
when sending out SIP RTP voice packets. This MIB and arrisMtaCfgRTPDynPortStart
are to be used together.
The range limit is 1024-65535. Where arrisMtaCfgRTPDynPortStart can be 1024 and
arrisMtaCfgRTPDynPortEnd can be 65535. The default range is 49152-65535.
However it should be noted that the IANA defines the following ranges:
The Well Known Ports are those from 0 through 1023.
The Registered Ports are those from 1024 through 49151.
The Dynamic and/or Private Ports are those from 49152 through 65535."
::= { arrisMtaDevOperationalSetup 8 }
arrisMtaDevVPMaxJitterBuffer OBJECT-TYPE
SYNTAX INTEGER {
packetizationRatex1(1),
packetizationRatex2(2),
packetizationRatex3(3),
packetizationRatex4(4),
packetizationRatex5(5),
packetizationRatex6(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Voice Playout maximum jitter buffer."
DEFVAL { packetizationRatex6 }
::= { arrisMtaDevOperationalSetup 9 }
arrisMtaDevPacketcableProvisioningFlow OBJECT-TYPE
SYNTAX INTEGER {
secure (0),
hybrid2 (1),
hybrid1 (2),
basic2 (3),
basic1 (4),
none (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PacketCable simplified provisioning flow support for PC1.5 Compliance. This object
will be updated by the Provisioning Code. The following PC1.5 Compliant Provisioning
methods are supported:
secure (0) - PacketCable 1.5 Secure Flow
hybrid2 (1) - PacketCable 1.5 Hybrid 2 Flow
hybrid1 (2) - PacketCable 1.5 Hybrid 1 Flow
basic2 (3) - PacketCable 1.5 Basic 2 Flow
basic1 (4) - PacketCable 1.5 Basic 1 Flow
none (5) - ARRIS NON PacketCable 1.5 Flow"
DEFVAL { none }
::= { arrisMtaDevOperationalSetup 39 }
arrisMtaDevEnableIndexTenEleven OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to enable telephone line indices ten and eleven
instead of telephone line indices nine and ten. Index ten will be the
mininum index for the MTA. The default value for this MIB object is disablel(0)."
::= { arrisMtaDevOperationalSetup 13 }
arrisMtaDevGainControlFSK OBJECT-TYPE
SYNTAX Integer32(-10..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain adjustment (dBm) for MTA generated FSK tones (CID and VMWI).
A value of 2 increases the FSK level by 2 dBm. A value of -2 decreases the FSK
level by 2 dBm."
DEFVAL { 0 }
::= { arrisMtaDevGainControl 1 }
arrisMtaDevGainControlCAS OBJECT-TYPE
SYNTAX Integer32(-2..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain adjustment (dBm) for MTA generated CAS tone.
A value of 2 increases the playout level by 2 dBm. A value of -2 decreases the playout
level by 2 dBm."
DEFVAL { 0 }
::= { arrisMtaDevGainControl 2 }
arrisMtaDevGainControlLocalTone OBJECT-TYPE
SYNTAX Integer32(-2..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain adjustment (dBm) for all MTA generated Call Progress tones
(Dialtone, Busytone, Ringback, etc.) toward the CPE. A value of 2 increases the
playout level by 2 dBm. A value of -2 decreases the playout level by 2 dBm. This MIB
does not effect CAS tone levels - use arrisMtaDevGainControlCAS for adjusting the
CAS tone."
DEFVAL { 0 }
::= { arrisMtaDevGainControl 3 }
arrisMtaDevGainControlNetworkTone OBJECT-TYPE
SYNTAX Integer32(-2..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain adjustment (dBm) for MTA generated Call Progress tones
toward the network (Ringback). A value of 2 increases the playout level by 2 dBm.
A value of -2 decreases the playout level by 2 dBm."
DEFVAL { 0 }
::= { arrisMtaDevGainControl 4 }
arrisMtaDevGainControlLocalDTMF OBJECT-TYPE
SYNTAX Integer32(-15..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain adjustment (dBm) for MTA generated DTMF tones toward
the local CPE (ex. DTMF CID). A value of 2 increases the playout level by 2 dBm.
A value of -2 decreases the playout level by 2 dBm."
DEFVAL { 0 }
::= { arrisMtaDevGainControl 5 }
arrisMtaDevGainControlNetworkDTMF OBJECT-TYPE
SYNTAX Integer32(-9..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain adjustment (dBm) for MTA generated DTMF tones
toward the network (ex. IPDT Pulse Dialing). A value of 2 increases the playout
level by 2 dBm. A value of -2 decreases the playout level by 2 dBm."
DEFVAL { 0 }
::= { arrisMtaDevGainControl 6 }
arrisMtaDevGainControlTxVoice OBJECT-TYPE
SYNTAX Integer32(-16..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain adjustment (dBm) for voice. A value of 2 increases
the voice level by 2 dBm. A value of -2 decreases the voice level by 2 dBm. This
value does not effect the levels of local tones or FSK.
NOTE: Use caution when changing this MIB. Increasing or decreasing the voice level
by the larger numbers allowed in the range may compromise voice quality."
DEFVAL { 0 }
::= { arrisMtaDevGainControl 7 }
arrisMtaDevGainControlRxVoice OBJECT-TYPE
SYNTAX Integer32(-16..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The receive digital gain adjustment (dBm) for voice. A value of 2 increases
the voice level by 2 dBm. A value of -2 decreases the voice level by 2 dBm.
NOTE: Use caution when changing this MIB. Increasing or decreasing the voice level
by the larger numbers allowed in the range may compromise voice quality."
DEFVAL { 0 }
::= { arrisMtaDevGainControl 8 }
arrisMtaDevLevelControlOffHookEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows for the use of the arrisMtaDevLevelControlOffHookFSK and
arrisMtaDevLevelControlOffHookCAS MIBs. When this is set to enable, those
MIBs will be replace the arrisMtaDevLevelControlFSK and
arrisMtaDevLevelControlCAS MIBs in off-hook situations."
DEFVAL { 0 }
::= { arrisMtaDevLevelControl 1 }
arrisMtaDevLevelControlOffHookFSK OBJECT-TYPE
SYNTAX Integer32(-32..-10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain setting (dBm) for MTA generated FSK tones (CID and VMWI)
while the line is off hook. The MIB can be adjusted in 1dBm increcements from a high
of -10dBm to a low of -32dBm. The arrisMtaDevLevelControlOffHookEnable MIB must
enabled to activate this MIB."
DEFVAL { -15 }
::= { arrisMtaDevLevelControl 2 }
arrisMtaDevLevelControlOffHookCAS OBJECT-TYPE
SYNTAX Integer32(-32..-10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain setting (dBm) for MTA generated CAS tones (CID and VMWI)
while the line is off hook. The MIB can be adjusted in 1dBm increcements from a high
of -10dBm to a low of -32dBm. The arrisMtaDevLevelControlOffHookEnable MIB must
enabled to activate this MIB."
DEFVAL { -15 }
::= { arrisMtaDevLevelControl 3 }
-- arrisMtaDevEnableIndexTenEleven OBJECT-TYPE
-- SYNTAX INTEGER {
-- disable(0),
-- enable(1)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This MIB object is used to enable telephone line indices ten and eleven
-- instead of telephone line indices nine and ten. Index ten will be the
-- mininum index for the MTA. The default value for this MIB object is disable(0)."
-- ::= { arrisMtaDevOperationalSetup 13 }
arrisMtaDevDspCpsSetting OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable the ECAN fast constant power signal detection. A default value of
on(2) makes the echo cancellor disengage immediately when a high level constant power
signal is detected. A value of off(1) will not disengage the ECAN when a high level
constant power signal is detected."
DEFVAL { on }
::= { arrisMtaDevOperationalSetup 14 }
arrisMtaDevVbdOverwriteLineBitmap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set, changes fax/modem jitter buffer settings for the selected line to the
VbdOverwriteJitterBuffer values entered in the config file.
(0) no line set, (0x1) line #1 set, (0x2) line #2 set, (0x4) line #3 set, ..."
DEFVAL { 0 }
::= { arrisMtaDevOperationalSetup 16 }
arrisMtaDevVbdOverwriteMinJitterBuffer OBJECT-TYPE
SYNTAX INTEGER(10..160)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When used in conjuction with arrisMtaDevVbdOverwriteLineBitmap, this value will
be used as the minimun jitter buffer setting in all modem/fax calls for the selected
lines."
DEFVAL { 20 }
::= { arrisMtaDevOperationalSetup 17 }
arrisMtaDevVbdOverwriteNomJitterBuffer OBJECT-TYPE
SYNTAX INTEGER(10..160)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When used in conjuction with arrisMtaDevVbdOverwriteLineBitmap, this value will
be used as the nominal jitter buffer setting in all modem/fax calls for the selected
lines."
DEFVAL { 70 }
::= { arrisMtaDevOperationalSetup 18 }
arrisMtaDevVbdOverwriteMaxJitterBuffer OBJECT-TYPE
SYNTAX INTEGER(10..160)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When used in conjuction with arrisMtaDevVbdOverwriteLineBitmap, this value will
be used as the maximum jitter buffer setting in all modem/fax calls for the selected
lines."
DEFVAL { 160 }
::= { arrisMtaDevOperationalSetup 19 }
arrisMtaDevEventHideFQDNandIPAddress OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to enable hide MTA fqdn and IP address on basic web page event log
. The default value for this MIB object is disable(0)."
::= { arrisMtaDevOperationalSetup 20 }
arrisMtaDevDhcpOptionOverride OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Typically the value received in the DHCP OFFER should not change in the DHCP ACK. DHCP
RENEW/REBIND values should be consistent with the value received in the DHCP OFFER. This
MIB object will Enable or Disable the DHCP option code 122/177 suboption 3 value enforcement.
A value of off(1) will enable DHCP option 122/177 suboption 3 value comparison
checking. A value of on(2) will disable the enforcement of DHCP option 122/177
suboption 3 value comparison checking.
The default value is off(1)."
DEFVAL { off }
::= { arrisMtaDevOperationalSetup 21 }
arrisMtaDevTFTPServerAddrOverrideFQDN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"FQDN of the TFTP Server that holds the MTA config file. This is used to override the default
TFTP Server. This can only be used with the gupiTftpSvrOverride(11) Provisioning Method."
::= { arrisMtaDevOperationalSetup 22}
arrisMtaDevDefaultReasonNoCIDName OBJECT-TYPE
SYNTAX INTEGER {
unavailable(0),
private(1),
sendnothing(2),
sdmf(3),
excludeName(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object determines what reason is sent to the CPE when the Caller ID Name is not included in the signal request.
The default value for this MIB object is 'O' for unavailable or outofarea(0). If the value of the MIB is set to private(1)
then 'P' is sent to the CPE. The value of sendnothing(2) tells the MTA to send NULL reason for the missing name.
The value of sdmf(3) sends the number only in NA SDMF format. The value of excludeName(4) tells the MTA to not include
any name parameters or reason for missing name."
::= { arrisMtaDevOperationalSetup 23 }
arrisMtaDevSipConfigFileURL OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The URL of the SIP configuration file for redownloading provisioning and
configuration parameters to this device."
::= { arrisMtaDevOperationalSetup 24 }
arrisMtaDevSipDwnldConfig OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable a redownload of the SIP configuration file parameters specified via
the configuration file URL obtained in the MIB object arrisMtaDevSipConfigFileURL.
When read this MIB object will always return a value of off(1)."
DEFVAL { off }
::= { arrisMtaDevOperationalSetup 25 }
arrisMtaDevSpecialConfigurationOverrideEnable OBJECT-TYPE
SYNTAX BITS {
enableDhcpOption60SubOpt18Ovrd(0),
unused1(1),
unused2(2),
unused3(3),
unused4(4),
unused5(5),
unused6(6),
unused7(7),
unused8(8),
unused9(9),
unused10(10),
unused11(11),
unused12(12),
unused13(13),
unused14(14),
unused15(15),
unused16(16),
unused17(17),
unused18(18),
unused19(19),
unused20(20),
unused21(21),
unused22(22),
unused23(23),
unused24(24),
unused25(25),
unused26(26),
unused27(27),
unused28(28),
unused29(29),
unused30(30),
unused31(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable proprietary features of the Arris MTA
From left to right, the specified bit indicates whether or not
the corresponding MTA feature is enabled. For example, if the first
bit is set, then the enableDhcpOption60SubOpt18Ovrd feature is enabled. If
it is zero, the feature is disabled. NO bits are set by default.
Field is 32 bits long and all 32 bits must be written.
/** BIT Descriptions **/
0x80000000 : enableDhcpOption60SubOpt18Ovrd - Enable DHCP Option 60 SubOption 18 override
0x40000000 : Reserved for Future.
0x20000000 : Reserved for Future.
0x10000000 : Reserved for Future.
0x08000000 : Reserved for Future.
0x04000000 : Reserved for Future.
0x02000000 : Reserved for Future.
0x01000000 : Reserved for Future.
0x00800000 : Reserved for Future.
0x00400000 : Reserved for Future.
0x00200000 : Reserved for Future.
0x00100000 : Reserved for Future.
0x00080000 : Reserved for Future.
0x00040000 : Reserved for Future.
0x00020000 : Reserved for Future.
0x00010000 : Reserved for Future.
0x00008000 : Reserved for Future.
0x00004000 : Reserved for Future.
0x00002000 : Reserved for Future.
0x00001000 : Reserved for Future.
0x00000800 : Reserved for Future.
0x00000400 : Reserved for Future.
0x00000200 : Reserved for Future.
0x00000100 : Reserved for Future.
0x00000080 : Reserved for Future.
0x00000040 : Reserved for Future.
0x00000020 : Reserved for Future.
0x00000010 : Reserved for Future.
0x00000008 : Reserved for Future.
0x00000004 : Reserved for Future.
0x00000002 : Reserved for Future.
0x00000001 : Reserved for Future."
DEFVAL { '00000000'h }
::= { arrisMtaDevOperationalSetup 26 }
arrisMtaDevRtcpTosValue OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This value determines what value is used in the IP TOS byte for RTCP packets."
::= { arrisMtaDevOperationalSetup 27 }
arrisMtaDevAutomaticOsiDelay OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "100 milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This MIB defines the time, in 100ms increments, to wait after a DLCX is received before determining if an automatic OSI should be generated by the MTA to force a line disconnect.
The default time is 5 seconds. A value of 0 would cause the OSI to be sent immediately (if there are no other connections on the line). The ppCfgMtaCallpFeatureSwitch must have the 0x20000000 bit set for this feature to be enabled."
DEFVAL { 50 }
::= { arrisMtaDevOperationalSetup 28 }
arrisMtaDevCustomJitterBufferEnabled OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables ability to customize jitter buffer settings using the CustomMinJitterBuffer, CustomNomJitterBuffer and CustomMaxJitterBuffer
mibs. When this setting is off, the jitter buffer will be determined using the arrisMtaDevVPNomJitterBuffer and
arrisMtaDevVPMaxJitterBuffer mibs and defaults to min=nom=[(packet rate *1) + 5] and max = [(packet rate * 3) + 5] msecs.
When set to on, the custom jitter buffer settings will default to 5-10-60 if no custom value is set using the CustomMinJitterBuffer,
CustomNomJitterBuffer and CustomMaxJitterBuffer mibs."
DEFVAL { off }
::= { arrisMtaDevOperationalSetup 29 }
arrisMtaDevCustomMinJitterBuffer OBJECT-TYPE
SYNTAX INTEGER (5..160)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the customized voice playout minimum jitter buffer to be used when the arrisMtaDevCustomJitterBufferEnabled is set to on.
Valid range is 5-160 in increments of 5"
DEFVAL { 5 }
::= { arrisMtaDevOperationalSetup 30 }
arrisMtaDevCustomNomJitterBuffer OBJECT-TYPE
SYNTAX INTEGER (5..160 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the customized voice playout nominal jitter buffer to be used when the arrisMtaDevCustomJitterBufferEnabled is set to on.
Valid range is 5-160 in increments of 5"
DEFVAL { 10 }
::= { arrisMtaDevOperationalSetup 31 }
arrisMtaDevCustomMaxJitterBuffer OBJECT-TYPE
SYNTAX INTEGER (5..160)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the customized voice playout maximum jitter buffer to be used when the arrisMtaDevCustomJitterBufferEnabled is set to on.
Valid range is 5-160 in increments of 5"
DEFVAL { 120 }
::= { arrisMtaDevOperationalSetup 32 }
arrisMtaDevEnableDHCPLog OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable/disable MTA DHCP logging."
::= { arrisMtaDevOperationalSetup 33 }
arrisMtaDevEnableMGCPLog OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable/disable CallP Signalling logging"
::= { arrisMtaDevOperationalSetup 34 }
arrisMtaDevClearDHCPLog OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to Clear the MTA DHCP Logs."
::= { arrisMtaDevOperationalSetup 35 }
arrisMtaDevClearMGCPLog OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to Clear the MTA MGCP Logs."
::= { arrisMtaDevOperationalSetup 36 }
arrisMtaDevTDDReportToCMS OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows configuration of whether TDD detection events are reported to CMS."
DEFVAL { enable }
::= { arrisMtaDevOperationalSetup 37 }
arrisMtaDevAutomaticCallResourceRecovery OBJECT-TYPE
SYNTAX Integer32(0..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MIB defines the number of seconds to delay upon an on-hook event before detecting
that all resources acquired while a call was active need to be recovered on a line
in the IDLE state. A value of 0 disables the automatic feature."
::= { arrisMtaDevOperationalSetup 38 }
arrisMtaDevOffHookFskDelay OBJECT-TYPE
SYNTAX Integer32(0..500)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MIB defines the time (in milliseconds) to delay before sending the FSK to the CPE.
The delay starts upon receiving the ACK (DTMF D) from the CPE in response to the CAS tone for
Call Waiting (or Type 2) Caller ID."
::= { arrisMtaDevOperationalSetup 41 }
arrisMtaDevT38Timeout OBJECT-TYPE
SYNTAX Integer32(1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows configuration of the T38 timeout, during which time the audio is muted, before T38
failure events are reported to CMS."
DEFVAL { 30 }
::= { arrisMtaDevOperationalSetup 42 }
arrisMtaDevSuperG3FaxRelay OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows configuration of SuperG3 fax processing upon detection of the V21 CM or V.8 data signal.
When disabled, the MTA still detects the signaling for SuperG3 fax and the signal is used to
setup the endpoint for SuperG3 pass-thru fax transmission via G711. When enabled the MTA handles
the detection of SuperG3 signaling to trigger the start of T.38 process. The negotiation during
call setup determines whether or not T.38 can be used to send the fax."
DEFVAL { disable }
::= { arrisMtaDevOperationalSetup 43 }
arrisMtaDevDTMFEndEventForceAscending OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable/disable RFC 2833 DTMF end event duration force ascending."
DEFVAL { disable }
::= { arrisMtaDevOperationalSetup 44 }
arrisMtaDevDspHandleBellModemTone OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the DSP to detect the Bell Modem Tone (2225kHz). The Bell Modem Tone is
frequently used by older data modems, usually in low speed setups. When this
MIB is set to enable(1), the DSP will detect the Bell Modem Tone from either the
local or network end. When this MIB is set to disable(0), the tone will be ignored."
DEFVAL { disable }
::= { arrisMtaDevOperationalSetup 45 }
arrisMtaDevDhcpSubOpt3Immediate OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object will control the comparison/handling of MTA DHCP Opt 122 SubOpt 3.
A value of off(1) will disable DHCP option 122 suboption 3 comparison/handling on the fly.
A value of on(2) will enable DHCP option 122 suboption 3 comparison/handling on the fly.
SNMP notifications will be sent to the new Provisioning SNMP Entity.
The default value is off(1)."
DEFVAL { off }
::= { arrisMtaDevOperationalSetup 46 }
arrisMtaDevMaxCallPServiceFlows OBJECT-TYPE
SYNTAX Integer32(0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to limit the number of calls (service flows). Outgoing calls, incoming calls,
and conference call legs are included in this count. The EMTA ports are able to
call each other without this limitation. Default value 0 means disable this feature."
DEFVAL { 0 }
::= { arrisMtaDevOperationalSetup 47 }
--
-- The following MIBs control HD Voice Options
--
arrisMtaDevHDAudioDefaultPayloadType OBJECT-TYPE
SYNTAX INTEGER {
static(0),
dynamic(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The setting of this MIB provisions the MTA to offer the G722 codec with the defined
static payload of (9)or a payload in the dynamic range of (96-127). This MIB setting is persistent."
DEFVAL { static }
::= { arrisMtaDevOperationalSetup 49}
arrisMtaDevWBSLIC OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The setting of this MIB sets the SLIC and DSP to WB mode. This MIB setting is persistent.
This MIB should be set from the CM configuration file. If this MIB value is altered in the
CM configuration file then the modem will reboot automatically after the change is applied.
A SNMP set after provisioning will take effect after the next reboot."
DEFVAL { disable }
::= { arrisMtaDevOperationalSetup 50}
arrisMtaDevProvisionedCodecArray OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the list of codecs offered in the SDP as well as codecs returned in capabilities
for an AUEP response.
This MIB is only used with NCS signaling.
These are entered as a string separated by semi-colon ';' or comma ',' for example
'PCMU;PCMA;G726-32;telephone-event'.
This object should only be changed by the configuration file.
The default string will be NULL. A NULL string will result in consistent operation to previous
FW releases where all supported codecs are listed. "
::= { arrisMtaDevOperationalSetup 51 }
arrisMtaDevHDAudioG722SampleRate OBJECT-TYPE
SYNTAX INTEGER {
rate8000(0),
rate16000(1),
rateDynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB controls the SampleRate advertised in the rtpmap for the HD codec G722.
The actual sample rate is 16000 however for backward compatibility with RFC 1890
the default is 8000. The dynamic selection is to set the sample rate to the same
value received in SDP for the G722 codec.
Examples:
a=rtpmap: 99 G722-64/8000
a=rtpmap: 99 G722-64/16000"
DEFVAL { rate8000 }
::= { arrisMtaDevOperationalSetup 52}
arrisMtaDevHDAudioEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The setting of this MIB enables the MTA to support HD Audio codecs such as G722."
DEFVAL { enable }
::= { arrisMtaDevOperationalSetup 53}
arrisMtaDevRtcpJitterDisabled OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The setting of this MIB disables the MTA to report the real Jitter value in the RTCP packet."
DEFVAL { off }
::= { arrisMtaDevOperationalSetup 54}
arrisMtaDevDiagLoopTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDevDiagLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arris Touchstone specific per line loop diagnostic details"
::= { arrisMtaDevDiag 1 }
arrisMtaDevDiagLoopEntry OBJECT-TYPE
SYNTAX ArrisMtaDevDiagLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each end point entry represents one telephone line"
INDEX { arrisMtaDevDiagLoopIndex }
::= { arrisMtaDevDiagLoopTable 1 }
ArrisMtaDevDiagLoopEntry ::= SEQUENCE {
arrisMtaDevDiagLoopIndex Integer32,
arrisMtaDevDiagLoopTime DisplayString,
arrisMtaDevDiagLoopRequest TruthValue,
arrisMtaDevDiagLoopLastResult INTEGER,
arrisMtaDevDiagLoopHazardousPotentialTest DisplayString,
arrisMtaDevDiagLoopForeignEmfTest DisplayString,
arrisMtaDevDiagLoopResistiveFaultsTest DisplayString,
arrisMtaDevDiagLoopReceiverOffHookTest DisplayString,
arrisMtaDevDiagLoopRingerTest DisplayString }
arrisMtaDevDiagLoopIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique value which identifies the port."
::= { arrisMtaDevDiagLoopEntry 1 }
arrisMtaDevDiagLoopTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reports the time & date when loop diagnostics
were last run on the selected line. (Patent Pending)"
::= { arrisMtaDevDiagLoopEntry 2 }
arrisMtaDevDiagLoopRequest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this value to true will send a
diagnostics request on the line. Reading this
value will always return false. The
maintenance state of the line indicates
if diagnostics are being run on the line.
Note: Currently supported on TM402 only. (Patent Pending)"
::= { arrisMtaDevDiagLoopEntry 3 }
arrisMtaDevDiagLoopLastResult OBJECT-TYPE
SYNTAX INTEGER{diagnostics-passed(1),hazardous-potential-test-failure(2),
foreign-emf-test-failure(3),resistive-faults-test-failure(4),
receiver-offhook-test-failure(5), ringer-test-failure(6),
invalid-state-to-init-diags(7), line-is-unprovisioned(8),
diagnostics-results-pending(9), not-started(10),
unsupported(11), ringer-test-warning(12) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Start loop diag testing with arrisMtaDevDiagLoopRequest.
Thereafter reading this MIB provides current status. When testing
is complete, the status will be either all-loop-diags-passed
or the first test failed will be indicated. (Patent Pending)"
::= { arrisMtaDevDiagLoopEntry 4 }
arrisMtaDevDiagLoopHazardousPotentialTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the hazardous-potential-test result for the last
time that loop diags were run. (Patent Pending)"
::= { arrisMtaDevDiagLoopEntry 5 }
arrisMtaDevDiagLoopForeignEmfTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the foreign-emf-test result for the last
time that loop diags were run. (Patent Pending)"
::= { arrisMtaDevDiagLoopEntry 6 }
arrisMtaDevDiagLoopResistiveFaultsTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the resistive-faults-test result for the last
time that loop diags were run. (Patent Pending)"
::= { arrisMtaDevDiagLoopEntry 7 }
arrisMtaDevDiagLoopReceiverOffHookTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the receiver-offhook-test result for the last
time that loop diags were run. (Patent Pending)"
::= { arrisMtaDevDiagLoopEntry 8 }
arrisMtaDevDiagLoopRingerTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the ringer-test result for the last
time that loop diags were run. (Patent Pending)"
::= { arrisMtaDevDiagLoopEntry 9 }
arrisMtaDevCmIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDevCmIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ARRIS proprietary IP Address table used for getting
CM IP address and physical address from MTA."
::= { arrisMtaDevCmIp 1 }
arrisMtaDevCmIpEntry OBJECT-TYPE
SYNTAX ArrisMtaDevCmIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one IP address and one physical address."
INDEX { arrisMtaDevCmIpIndex }
::= { arrisMtaDevCmIpTable 1 }
ArrisMtaDevCmIpEntry ::= SEQUENCE {
arrisMtaDevCmIpIndex Integer32,
arrisMtaDevCmIpAddressType InetAddressType,
arrisMtaDevCmIpAddress InetAddress,
arrisMtaDevCmIpPhysAddress PhysAddress
}
arrisMtaDevCmIpIndex OBJECT-TYPE
SYNTAX Integer32 (0..0)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index used to order the arrisMtaDevCmIpTable entries.
Currently, CM only supports single IP address, thus
there would be no more than 1 entry in arrisMtaDevCmIpTable"
::= { arrisMtaDevCmIpEntry 1 }
arrisMtaDevCmIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of arrisMtaDevCmIpAddress."
::= { arrisMtaDevCmIpEntry 2 }
arrisMtaDevCmIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CM IP address."
::= { arrisMtaDevCmIpEntry 3 }
arrisMtaDevCmIpPhysAddress OBJECT-TYPE
SYNTAX PhysAddress (SIZE(0..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CM physical address."
::= { arrisMtaDevCmIpEntry 4 }
arrisMtaDevEndPntTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDevEndPntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arris Touchstone specific per line provisioning details"
::= { arrisMtaDevEndPntSetup 3 }
arrisMtaDevEndPntEntry OBJECT-TYPE
SYNTAX ArrisMtaDevEndPntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each end point entry represents one telephone line"
INDEX { arrisMtaDevEndPntIndex }
::= { arrisMtaDevEndPntTable 1 }
ArrisMtaDevEndPntEntry ::= SEQUENCE {
arrisMtaDevEndPntIndex Integer32,
arrisMtaDevEndPntDialingMethod INTEGER,
arrisMtaDevEndPntRingingWaveform INTEGER,
arrisMtaDevEndPntFaxOnlyLineTimeout Integer32,
arrisMtaDevPersistentLineStatus INTEGER,
arrisMtaDevEndPntCallWaitingRepeatSteady INTEGER,
arrisMtaDevEndPntCIDEnable INTEGER,
arrisMtaDevEndPntCIDNameEnable INTEGER,
arrisMtaDevEndPntCIDDateTimeEnable INTEGER,
arrisMtaDevEndPntLoopReversal INTEGER,
arrisMtaDevEndPntGainControlTxVoice INTEGER,
arrisMtaDevEndPntGainControlRxVoice INTEGER,
arrisMtaDevEndPntHDAudioEnable INTEGER,
arrisMtaDevEndPntHDAudioStatus INTEGER,
arrisMtaDevEndPntCallPState INTEGER
}
arrisMtaDevEndPntIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique value which identifies the port."
::= { arrisMtaDevEndPntEntry 1 }
arrisMtaDevEndPntDialingMethod OBJECT-TYPE
SYNTAX INTEGER { tone(1), pulse(2), toneAndPulse(3), pulseWithDTMFRelay(4), toneAndPulseWithDTMFRelay(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the method used to dial the digits for this telephony
endpoint. If tone(1), tone dialing (DTMF) is used. If pulse(2),
dial-pulse signaling is used to dial the digits, Tone dialing(DTMF) is
disabled. If Tone & Pulse(3), tone dialing(DTMF) and dial-pulse signaling
is used to dial the digits. If Pulse with DTMF relay(4), Tone dialing(DTMF)
is disabled, and pulse dialed digits will be relayed in-band to the media
gateway. If Tone & Pulse with DTMF relay(5), Tone dialing (DTMF) is enable,
and pulse dialed digits will be relayed in-band to the media gateway.
NOTE: (4) & (5) will require IPDT solution as well as DTMF support by the
Media gateway. The default value for this object is tone(1)."
DEFVAL { tone }
::= { arrisMtaDevEndPntEntry 24 }
arrisMtaDevEndPntRingingWaveform OBJECT-TYPE
SYNTAX INTEGER { normal(1), sinusoidal(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the voltage waveform used when ringing this telephony
endpoint. If normal(1) is used the standard waveform will be applied.
If sinusoidal(2) is specified, extra waveshaping will be performed. This
is for use with telephones that exhibit increased sensitivity to the ring
voltage waveform. The default value for this object is normal(1)."
DEFVAL { normal }
::= { arrisMtaDevEndPntEntry 25 }
arrisMtaDevEndPntFaxOnlyLineTimeout OBJECT-TYPE
SYNTAX Integer32 (0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to define a line as a fax only line for NCS. The default value of the
object is zero which means no timeout. When the object is set to a non-zero value
a timer is started after the RTP mode becomes sendReceive. If this timer pops without
having received fax/modem tones on the connection the call will be dropped. Its
units are in seconds."
DEFVAL { 0 }
::= { arrisMtaDevEndPntEntry 26 }
arrisMtaDevPersistentLineStatus OBJECT-TYPE
SYNTAX INTEGER {
ignore(0),
forceDisable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set persistent line status. This MIB and the ifAdminStatus MIB impact the
line status. If ignore(0) is set, the line status will be based on the
setting of ifAdminStatus in the MTA Config File. If ifAdminStatus is
not set in the MTA Config File, then the ifAdminStatus will be set to the
default value. The default value is up(1) if the line is provisioned and
down(2) if the line is not provisioned.
If this MIB is set to forceDisable(1), the service status of the line is set to
DOWN and the line state is set to EP_OOS after a reset. This MIB is always
ignored in a Config File. This MIB will be set to ignore(0) if the
arrisMtaDevRestoreNvmFactoryDefault is set to clear(1)."
DEFVAL { ignore }
::= { arrisMtaDevEndPntEntry 27 }
arrisMtaDevEndPntCallWaitingRepeatSteady OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled(1), it indicates that the call waiting tone should repeat forever.
If disabled(0), it concludes using the finite rules."
DEFVAL { disable }
::= { arrisMtaDevEndPntEntry 28 }
arrisMtaDevEndPntCIDEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable/disable the All the Caller ID field send to phone.
If it's diabled, no Caller ID information will be sent."
DEFVAL { enable }
::= { arrisMtaDevEndPntEntry 29 }
arrisMtaDevEndPntCIDNameEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable/disable the Name part of CallerID field send to phone."
DEFVAL { enable }
::= { arrisMtaDevEndPntEntry 30 }
arrisMtaDevEndPntCIDDateTimeEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable/disable the Date/Time part of CallerID field send to phone."
DEFVAL { enable }
::= { arrisMtaDevEndPntEntry 31 }
arrisMtaDevEndPntLoopReversal OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This mib is used to manage loop polarity/reversal. When enabled(1), it indicates that
the line should be reversed to normal once the originating party hangs up first.
If disabled(0), the loop keeps on being reversed while the originating party hangs up."
DEFVAL { disable }
::= { arrisMtaDevEndPntEntry 32 }
arrisMtaDevEndPntGainControlTxVoice OBJECT-TYPE
SYNTAX INTEGER{
dBm16(16),
dBm15(15),
dBm14(14),
dBm13(13),
dBm12(12),
dBm11(11),
dBm10(10),
dBm9(9),
dBm8(8),
dBm7(7),
dBm6(6),
dBm5(5),
dBm4(4),
dBm3(3),
dBm2(2),
dBm1(1),
dBm0(0),
dBm-1(-1),
dBm-2(-2),
dBm-3(-3),
dBm-4(-4),
dBm-5(-5),
dBm-6(-6),
dBm-7(-7),
dBm-8(-8),
dBm-9(-9),
dBm-10(-10),
dBm-11(-11),
dBm-12(-12),
dBm-13(-13),
dBm-14(-14),
dBm-15(-15),
dBm-16(-16),
disabled(-128)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain adjustment (dBm) for voice for a specific endpoint.
When set to a value other than disabled(-128), this MIB supersedes the
arrisMtaDevGainControlTxVoice MIB. A value of 2 increases
the voice level by 2 dBm. A value of -2 decreases the voice level by 2 dBm. This
value does not effect the levels of local tones or FSK.
Setting this MIB to disabled(-128) will disable this MIB and the Tx Voice Gain will
now be set by the arrisMtaDevGainControlTxVoice MIB.
NOTE: Use caution when changing this MIB. Increasing or decreasing the voice level
by the larger numbers allowed in the range may compromise voice quality."
DEFVAL { 0 }
::= { arrisMtaDevEndPntEntry 33 }
arrisMtaDevEndPntGainControlRxVoice OBJECT-TYPE
SYNTAX INTEGER {
dBm16(16),
dBm15(15),
dBm14(14),
dBm13(13),
dBm12(12),
dBm11(11),
dBm10(10),
dBm9(9),
dBm8(8),
dBm7(7),
dBm6(6),
dBm5(5),
dBm4(4),
dBm3(3),
dBm2(2),
dBm1(1),
dBm0(0),
dBm-1(-1),
dBm-2(-2),
dBm-3(-3),
dBm-4(-4),
dBm-5(-5),
dBm-6(-6),
dBm-7(-7),
dBm-8(-8),
dBm-9(-9),
dBm-10(-10),
dBm-11(-11),
dBm-12(-12),
dBm-13(-13),
dBm-14(-14),
dBm-15(-15),
dBm-16(-16),
disabled(-128)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit digital gain adjustment (dBm) for voice for a specific endpoint.
When set to a value other than disabled(-128), this MIB supersedes the
arrisMtaDevGainControlRxVoice MIB. A value of 2 increases
the voice level by 2 dBm. A value of -2 decreases the voice level by 2 dBm. This
value does not effect the levels of local tones or FSK.
Setting this MIB to disabled(-128) will disable this MIB and the Rx Voice Gain will
now be set by the arrisMtaDevGainControlRxVoice MIB.
NOTE: Use caution when changing this MIB. Increasing or decreasing the voice level
by the larger numbers allowed in the range may compromise voice quality."
DEFVAL { 0 }
::= { arrisMtaDevEndPntEntry 34 }
arrisMtaDevEndPntHDAudioEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The setting of this MIB sets an individual line to support HD Audio codecs such as G722.
The MTA MIB setting for arrisMtaDevHDAudioEnable can override the individual line setting.
This MIB is persistent when modified post provisioning."
DEFVAL { enable }
::= { arrisMtaDevEndPntEntry 35 }
arrisMtaDevEndPntHDAudioStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
notprovisioned(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Use this MIB to read the effective status of HD Audio for an endpoint."
::= { arrisMtaDevEndPntEntry 36 }
arrisMtaDevEndPntCallPState OBJECT-TYPE
SYNTAX INTEGER{
none(0),
out-of-service(1),
redialing(2),
idle(3),
predial(4),
dialing(5),
calling(6),
ringing(7),
connected(8),
waithook(9),
connected-alerting(10),
call-waiting(11),
three-way-calling(12),
conference(13),
predial-holding(14),
dialing-holding(15),
calling-holding(16),
waithook-holding(17),
waithook-alerting(18),
flash-digit(19),
stranded-call(20),
conf-before-answer(21),
autocall-ringing(22),
emergency-inject(23),
wait-reg(24),
restart(25),
disconnected(26),
inservice(27)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Use this MIB to read the status of callp state"
::= { arrisMtaDevEndPntEntry 37 }
arrisMtaDevBatteryChargerFWRev OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The firmware rev of the battery charger."
::= { arrisMtaDevPwrSupplyBase 1 }
arrisMtaDevPwrSupplyBatteryTestTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The present value of the Test Timer Scheduler expressed in days. If the value
read is 0xFF (255), the timer has been paused."
::= { arrisMtaDevPwrSupplyStats 4 }
arrisMtaDevPwrSupplyRatedBatCapacity OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rated capacity of the battery that is currently installed. The value is
expressed in units of energy (10 watt*minutes/count), rather than charge
(amp*hours)."
::= { arrisMtaDevPwrSupplyStats 5 }
arrisMtaDevPwrSupplyTestedBatCapacity OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured battery capacity expressed in 10 watt*minutes/count as determined
by the last battery test cycle."
::= { arrisMtaDevPwrSupplyStats 6 }
arrisMtaDevPwrSupplyBatStateOfCharge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The present battery state of charge expressed in 10 watt*minutes/count.
This value is approximate and is re-calibrated following a battery test cycle."
::= { arrisMtaDevPwrSupplyStats 7 }
arrisMtaDevPwrSupplyReadBatteryPwr OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The present load power expressed in 50mW/count and is an eight-second
moving average. This is the power being removed or applied to the battery.
Power is being removed while AC is not present or during the battery test.
Power is being applied if battery is being charged."
::= { arrisMtaDevPwrSupplyStats 8 }
arrisMtaDevPwrSupplySecondsOnBattery OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The present value of time expired since AC Failed and running on the battery."
::= { arrisMtaDevPwrSupplyStats 9 }
arrisMtaDevPwrSupplyBatRatedMinutes OBJECT-TYPE
SYNTAX INTEGER
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the rated run-time on the battery based upon the unit's
typical idle power and the rated capacity of the battery when fully charged."
::= { arrisMtaDevPwrSupplyStats 10 }
arrisMtaDevPwrSupplyBatAvailableMinutes OBJECT-TYPE
SYNTAX INTEGER
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the available run-time on the battery based upon the unit's
typical idle power and the tested capacity of the battery when fully charged."
::= { arrisMtaDevPwrSupplyStats 11 }
arrisMtaDevPwrSupplySecondsOnBattery2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Same as arrisMtaDevPwrSupplySecondsOnBattery but for 2nd battery."
::= { arrisMtaDevPwrSupplyStats 12 }
arrisMtaDevPwrSupplyBatRatedMinutes2 OBJECT-TYPE
SYNTAX INTEGER
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Same as arrisMtaDevPwrSupplyBatRatedMinutes but for 2nd battery."
::= { arrisMtaDevPwrSupplyStats 13 }
arrisMtaDevPwrSupplyBatAvailableMinutes2 OBJECT-TYPE
SYNTAX INTEGER
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Same as arrisMtaDevPwrSupplyBatAvailableMinutes but for 2nd battery."
::= { arrisMtaDevPwrSupplyStats 14 }
arrisMtaDevPwrSupplyTelemetryValues OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power Supply Telemetry Values. Fields are delimited by semicolons."
::= { arrisMtaDevPwrSupplyStats 15 }
ac-Fail OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 1 }
chargerOverTemp-Shutdown OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 2 }
chargerTemperature-High OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 3 }
batteryCharger-Disabled OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 4 }
chargerDownload-Failed OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 5 }
battery-Mismatch OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 6 }
upsAlarmBatteryBad OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 7 }
upsAlarmLowBattery OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 8 }
upsAlarmDepletedBattery OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 9 }
upsAlarmUpsOutputOff OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 10 }
upsAlarmOutputOffAsRequested OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 11 }
upsAlarmGeneralFault OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 12 }
upsAlarmShutdownImminent OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 13 }
upsAlarmBatteryMissing OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 14 }
upsAlarmAwaitingPower OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 15 }
upsAlarmShutdownPending OBJECT IDENTIFIER ::= { arrisMtaDevPwrSupplyAlarm 16 }
arrisMtaDevBatteryStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArrisMtaDevBatteryStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Power Supply Telemetry table ...There will be one row in this
table for each battery pack in the device"
::= { arrisMtaDevPwrSupplyStats 3 }
arrisMtaDevBatteryStatusEntry OBJECT-TYPE
SYNTAX ArrisMtaDevBatteryStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status information for a single battery pack. An entry in this
table exists for each battery pack contained in the device."
INDEX { arrisMtaDevBatteryStatusIndex }
::= { arrisMtaDevBatteryStatusTable 1 }
ArrisMtaDevBatteryStatusEntry ::= SEQUENCE {
arrisMtaDevBatteryStatusIndex INTEGER,
arrisMtaDevBatteryOperState INTEGER,
arrisMtaDevBatteryLastStateChange TimeStamp,
arrisMtaDevBatteryOperSubState SnmpAdminString,
arrisMtaDevBatteryOrderingCode SnmpAdminString,
arrisMtaDevBatteryEprom SnmpAdminString
}
arrisMtaDevBatteryStatusIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies each battery pack
in the MTA device. The table index ...."
::= { arrisMtaDevBatteryStatusEntry 1 }
arrisMtaDevBatteryOperState OBJECT-TYPE
SYNTAX INTEGER {
unavailable(0),
invalid(1),
shutdownWarning(2),
batteryReversedShorted(3),
batteryLow-replaceBattery-acFail(4),
batteryLow-replaceBattery(5),
batteryLow-acFail(6),
batteryLow(7),
batteryMissing(8),
acFail-replaceBattery(9),
replaceBattery(10),
acFail(11),
normal(12),
testInProgress(13),
chargerFailure(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current operational state of the battery."
::= { arrisMtaDevBatteryStatusEntry 2 }
arrisMtaDevBatteryLastStateChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the battery entered its
current operational state. If the current state was entered
prior to the last re-initialization of the local network management
subsystem, then this object contains a zero value."
::= { arrisMtaDevBatteryStatusEntry 3 }
arrisMtaDevBatteryOperSubState OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current sub-state of the battery. This info
is not designed to match the arrisMtaDevBatteryOperState but to
provide additional information as to the UPS Status."
::= { arrisMtaDevBatteryStatusEntry 4 }
arrisMtaDevBatteryOrderingCode OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Arris ordering code for the battery(s) currently installed."
::= { arrisMtaDevBatteryStatusEntry 5 }
arrisMtaDevBatteryEprom OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Battery EPROM information for the battery(s) currently installed."
::= { arrisMtaDevBatteryStatusEntry 6 }
arrisMtaDevPwrSupplyEnableDataShutdown OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
DEFVAL { disabled }
::= { arrisMtaDevPwrSupplyControl 1 }
arrisMtaDevPwrSupplyEnableWifiShutdown OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This MIB allows WTMx52 modems to shut down its wireless signal for power saving when modem switches to battery power.
If set this MIB to true, when AC fail and MTA is on Battery power, after about a timeout(specified by arrisMtaDevPwrSupplyDataShutdownTime), wifi signal would be turned off to save power and restored when AC power is on again.
Note: This MIB only takes affect when arrisMtaDevPwrSupplyEnableDataShutdown is set to disable."
DEFVAL { disabled }
::= { arrisMtaDevPwrSupplyControl 2 }
arrisMtaDevPwrSupplyLowBatteryThresh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the low battery threshold, which is used to detect a low battery condition.
The variable is expressed in 10 watt*minutes/count. The initial default value
is equivalent to 1 hour of holdup time. (Only available on MODEL 5 and MODEL 6 modems. Not supported on TM508/512)"
::= { arrisMtaDevPwrSupplyControl 3 }
arrisMtaDevPwrSupplyTypicalIdlePwr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The typical Idle power expressed in 50 mw/count. A typical value is
loaded upon power up. It is used in conjunction with the Tested Battery Capacity,
Low Battery Threshold and the Replace Battery Threshold to determine when to
raise Replace Battery Alarm or the Low Battery Alarm. (Only available on MODEL 5 and MODEL 6 modems. Not supported on TM508/512)"
::= { arrisMtaDevPwrSupplyControl 4 }
arrisMtaDevPwrSupplyReplaceBatThresh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the minimum acceptable battery charge needed to achieve the desired End of
Life holdup time based on typical Idle Power. If the Tested Battery Capacity
minus the Charge Hysteresis loss (20%) is less than this value, the Replace
Battery alarm will be raised. The variable is expressed in 10 watt*minutes/count.
The initial default value provides 1 hour of holdup time. (Only available on MODEL 5 and MODEL 6 modems. Not supported on TM508/512)"
::= { arrisMtaDevPwrSupplyControl 5 }
arrisMtaDevPwrSupplyChargeState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Causes the battery to be charged to the level that is specified by the data.
The value of charge is expressed in 10 watt*minutes/count. In order for the
battery to be charged to the correct level, issuing this command will cause
the charger to enter a discharge/charge cycle. The initial default value for
this parameter is 0.8 times the Rated Battery Capacity. This command should
be used with discretion. (Only available on MODEL 5 and MODEL 6 modems. Not supported on TM508/512)"
::= { arrisMtaDevPwrSupplyControl 6 }
arrisMtaDevPwrSupplyBatteryTest OBJECT-TYPE
SYNTAX INTEGER {
testScheduled(0),
disableAutoTesting(1),
testInProgress(2),
testPending(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB cannot be set on TM402 devices.
This feature controls the scheduling of the battery test.
TestScheduled: When written, causes the battery test scheduler to resume at its
current value. When read, means that the battery test will run when the scheduled
time expires.
DisableAutoTesting: When written, freezes the battery test scheduler at its
current value. When read, means that the battery test will never run - with one
exception. If a battery is removed and replaced, the test will run immediately.
Once the test completes, the pause status will still be in effect. Therefore,
the battery test will not run a second time.
TestInProgress: When written, causes the battery test cycle to start immediately
and the test scheduler to be reset to its default value of 180 days. This command
is ignored if there is a test in progress. When read, means test in progress.
TestPending: If a battery test is in progress and either: AC power is lost; or a
full charge is requested - the battery test is paused and the status is reported
as pending. This is a read-only value."
::= { arrisMtaDevPwrSupplyControl 8 }
arrisMtaDevPwrSupplyConfigRunTime OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An estimate of the available run-time on the battery based upon the unit's
typical idle power and the programmed battery charge setting. The available
battery back up time may be adjusted using this value. By programming the
run-time to a lower value, the total service life of the battery is extended.
Increasing the run-time in turn decreases the total service life of the battery.
Setting this value greater than arrisMtaDevPwrSupplyBatAvailableMinutes will not
provide a run-time greater than arrisMtaDevPwrSupplyBatAvailableMinutes. This
value can only be set to multiples of 5 minutes."
::= { arrisMtaDevPwrSupplyControl 9 }
arrisMtaDevPwrSupplyConfigReplaceBatTime OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the replace battery threshold in terms of run-time minutes. If a battery's
capacity has degraded to a point where it can no longer provide more than x minutes of
run-time, the Replace Battery condition becomes active. The default value at power up
is 60 minutes. This value can only be set to multiples of 5 minutes."
::= { arrisMtaDevPwrSupplyControl 10 }
arrisMtaDevPwrSupplyConfigReplaceBatTime2 OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Same as arrisMtaDevPwrSupplyConfigReplaceBatTime but for 2nd battery."
::= { arrisMtaDevPwrSupplyControl 11 }
arrisMtaDevPwrSupplyOverTempAlarmControl OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1),
pendingenable(2),
pendingdisable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether an Over Temperature Alarm is issued when the temperature
specified in arrisMtaDevPwrSupplyOverTempAlarmThreshold is reached. Also
determines whether the battery charger shuts down upon reaching 90C.
For 602 devices and above, this is always Enabled and cannot be set to Disabled.
For 502/552/504 devices, this is settable to Enabled and Disabled."
::= { arrisMtaDevPwrSupplyControl 12 }
arrisMtaDevPwrSupplyOverTempAlarmThreshold OBJECT-TYPE
SYNTAX Integer32
UNITS "degrees-C"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines temperature threshold for Over Temperature Alarm. Minimum
temperature is 50C. Maximum is 70C."
::= { arrisMtaDevPwrSupplyControl 13 }
arrisMtaDevPwrSupplyTemperature OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current temperature in degrees C. This is only available
when arrisMtaDevPwrSupplyOverTempAlarmControl is enabled."
::= { arrisMtaDevPwrSupplyControl 14 }
arrisMtaDevPwrSupplyHiTempBatteryShutdownControl OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether the battery will be turned off when the temperature
reaches 75C and above."
::= { arrisMtaDevPwrSupplyControl 15 }
arrisMtaDevPwrSupplyHighestTemperature OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest recorded battery charger temperature in degrees C. This is only available
when arrisMtaDevPwrSupplyOverTempAlarmControl is enabled."
::= { arrisMtaDevPwrSupplyControl 16 }
arrisMtaDevPwrSupplyHighestTemperatureTime OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the time and date when the highest temperature was recorded."
::= { arrisMtaDevPwrSupplyControl 17 }
arrisMtaDevPwrSupplyHighestTemperatureClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this MIB Clears arrisMtaDevPwrSupplyHighestTemperature and
arrisMtaDevPwrSupplyHighestTemperatureTime. These MIBs will be assigned
new values in a maximum of 4 seconds when the current temperature is calculated."
::= { arrisMtaDevPwrSupplyControl 18 }
arrisMtaDevPwrSupplyControlChargerReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object will reset the battery charger when set to true(1).
Warning: Resetting the battery charger in an AC Fail condition will immediately
shutdown the unit. This MIB object will always return false(2) when read."
::= { arrisMtaDevPwrSupplyControl 19 }
arrisMtaDevPwrSupplyDataShutdownTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the timeout period, in seconds, that the device will terminate
data services. The timer will start upon loss of AC power and operation
of battery backup begins. After the timer expires, the device will stop
providing data services (Ethernet and USB) and shutdown those functions
to conserve battery capacity. The default value for this object is 15
minutes(900 seconds) on model7 units, 5 minutes(300 seconds) on 16xx units
that support 802.11n(1642/62/72), and 1682 and 24xx units which support 802.11ac."
::= { arrisMtaDevPwrSupplyTimers 1 }
arrisMtaDevPwrSupplyFullChargeTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Causes the battery to be charged to 100% of its rated voltage and be maintained
at that level according the number of days set by the data. After the time has
elapsed, the battery charge level will be returned to the value specified by
arrisMtaDevPwrSupplyChargeState. Range of reported values: 0-16 days.
Values that can be written range from 1-16 days. If 1 is written the full charge
level will be maintained for 1 day. After that the full charge state will be
aborted and the battery charge will return to the set charge level or a test
will resume if one is pending. (This MIB is only effective on TM5xx and TM6xx HW models)"
::= { arrisMtaDevPwrSupplyTimers 2 }
END
View Git Blame Copy Permalink