1745 lines
58 KiB
Plaintext
1745 lines
58 KiB
Plaintext
--
|
|
--
|
|
-- Rainbow Performance Management Information Base
|
|
--
|
|
-- 06/06/2006
|
|
--
|
|
--
|
|
RAINBOW-PERFORMANCE-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
rainbow, Modulation
|
|
FROM RAINBOW-MIB
|
|
rbServiceID
|
|
FROM RAINBOW-SERVICES-MIB
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, Gauge32, Integer32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, MacAddress
|
|
FROM SNMPv2-TC
|
|
ifIndex
|
|
FROM RFC1213-MIB;
|
|
|
|
-- enterprises OBJECT IDENTIFIER ::=
|
|
-- { iso org(3) dod(6) internet(1) private(4) 1 }
|
|
-- alvarion OBJECT IDENTIFIER ::= { enterprises 12394 }
|
|
-- products OBJECT IDENTIFIER ::= { alvarion 1 }
|
|
-- rainbow OBJECT IDENTIFIER ::= { products 2 }
|
|
|
|
|
|
rbPerformance MODULE-IDENTITY
|
|
LAST-UPDATED "200606061500Z"
|
|
ORGANIZATION "Alvarion Ltd."
|
|
CONTACT-INFO "Alvarion Customer Service
|
|
Postal: Alvarion Ltd.
|
|
Barzel 21
|
|
Tel Aviv 69710
|
|
ISRAEL
|
|
E-mail: CS_Coordinator@alvarion.com"
|
|
DESCRIPTION
|
|
"Rainbow Performance monitoring MIB Definitions"
|
|
REVISION "200606061500Z"
|
|
DESCRIPTION
|
|
"Revision 2.5"
|
|
::= { rainbow 4 }
|
|
|
|
|
|
-- ####################################################################
|
|
-- Service Specific Performance Indicators
|
|
-- ####################################################################
|
|
|
|
|
|
rbPMServ OBJECT IDENTIFIER ::= { rbPerformance 1 }
|
|
|
|
-- #######################################################################
|
|
-- Performance Indicators of Connection Table for CG (VoIP) Services
|
|
-- #######################################################################
|
|
|
|
rbPMCGServConnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbPMCGServConnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This table is deprecated from NPU version 1.5
|
|
This table contains cumulative parameters per each CG (VoIP) Service
|
|
defined for the system.
|
|
All Statistics counters are accumulated since last reset "
|
|
::= { rbPMServ 1 }
|
|
|
|
rbPMCGServConnEntry OBJECT-TYPE
|
|
SYNTAX RbPMCGServConnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Entry in the rbPMCGServConnTable "
|
|
INDEX { rbServiceID , rbPMCGConnDirection }
|
|
::= { rbPMCGServConnTable 1 }
|
|
|
|
RbPMCGServConnEntry ::= SEQUENCE {
|
|
rbPMCGConnDirection INTEGER,
|
|
rbPMCGConnByteReq Counter32,
|
|
rbPMCGConnByteTx Counter32,
|
|
rbPMCGConnByteRetTx Counter32,
|
|
rbPMCGConnByteDropped Counter32,
|
|
rbPMCGConnByteDiscarded Counter32,
|
|
rbPMCGConnPktsReq Counter32,
|
|
rbPMCGConnPktsTx Counter32,
|
|
rbPMCGConnPktsDropped Counter32,
|
|
rbPMCGConnPktsDiscarded Counter32,
|
|
rbPMCGConnAvarageDelay Integer32,
|
|
rbPMCGConnStandardDeviationDelay Integer32,
|
|
rbPMCGConnMaxDelay Integer32,
|
|
rbPMCGConnPerSucsGrant Counter32,
|
|
rbPMCGConnAvgGrantInt Counter32,
|
|
rbPMCGConnMaxGrantInt Counter32,
|
|
rbPMCGConnAvgIntArvTime Counter32,
|
|
rbPMCGConnMaxIntArvTime Counter32,
|
|
rbPMCGConnMinIntArvTime Counter32,
|
|
rbPMCGConnAvgSDUDropRate Counter32,
|
|
rbPMCGConnResetCounters Integer32
|
|
}
|
|
|
|
rbPMCGConnDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
downLink (1),
|
|
upLink (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The direction in which counters were measured . "
|
|
::= { rbPMCGServConnEntry 1 }
|
|
|
|
rbPMCGConnByteReq OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of bytes submitted by upper layers to this connection"
|
|
::= { rbPMCGServConnEntry 2 }
|
|
|
|
rbPMCGConnByteTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of bytes transmitted to WL port through this
|
|
connection including retransmissions."
|
|
::= { rbPMCGServConnEntry 3 }
|
|
|
|
rbPMCGConnByteRetTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of bytes retransmitted to WL port through this connection."
|
|
::= { rbPMCGServConnEntry 4 }
|
|
|
|
rbPMCGConnByteDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of bytes dropped from this connection."
|
|
::= { rbPMCGServConnEntry 5 }
|
|
|
|
rbPMCGConnByteDiscarded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of bytes discarded from this connection"
|
|
::= { rbPMCGServConnEntry 6 }
|
|
|
|
rbPMCGConnPktsReq OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of packets submitted by upper layers to this connection"
|
|
::= { rbPMCGServConnEntry 7 }
|
|
|
|
rbPMCGConnPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of packets transmitted to WL through this connection
|
|
not including retransmissions."
|
|
::= { rbPMCGServConnEntry 8 }
|
|
|
|
rbPMCGConnPktsDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of packets dropped by the transmitter for this connection"
|
|
::= { rbPMCGServConnEntry 9 }
|
|
|
|
rbPMCGConnPktsDiscarded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of packets discarded by the transmitter for this connection."
|
|
::= { rbPMCGServConnEntry 10 }
|
|
|
|
rbPMCGConnAvarageDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Average packet delay in milliseconds, measured for this connection over the last 15 seconds."
|
|
::= { rbPMCGServConnEntry 11 }
|
|
|
|
rbPMCGConnStandardDeviationDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The variance of the packet delay, in milliseconds~2,
|
|
measured for this connection over the last 15 seconds."
|
|
::= { rbPMCGServConnEntry 12 }
|
|
|
|
rbPMCGConnMaxDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The maximum packet delay in milliseconds,
|
|
measured for this connection over the last 15 seconds."
|
|
::= { rbPMCGServConnEntry 13 }
|
|
|
|
rbPMCGConnPerSucsGrant OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Percentage of successes in granting the transmission,
|
|
measured for this Continuing Grant CONN over the last 15 seconds."
|
|
::= { rbPMCGServConnEntry 14 }
|
|
|
|
rbPMCGConnAvgGrantInt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Average Grant Interval, in microseconds,
|
|
measured for this Continuing Grant CONN over the last 15 seconds."
|
|
::= { rbPMCGServConnEntry 15 }
|
|
|
|
rbPMCGConnMaxGrantInt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Maximum Grant Interval, in microseconds,
|
|
measured for this Continuing Grant CONN over the last 15 seconds."
|
|
::= { rbPMCGServConnEntry 16 }
|
|
|
|
rbPMCGConnAvgIntArvTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Average of the SDU Inter-Arrival Time Interval measured
|
|
for this Continuing Grant CONN in the last 15 seconds."
|
|
::= { rbPMCGServConnEntry 17 }
|
|
|
|
rbPMCGConnMaxIntArvTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Maximum of the SDU Inter-Arrival Time Interval,
|
|
in microseconds, measured for this Continuing Grant CONN over the last 15 seconds."
|
|
::= { rbPMCGServConnEntry 18 }
|
|
|
|
rbPMCGConnMinIntArvTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Minimum of the SDU Inter-Arrival Time Interval,
|
|
in microseconds, measured for this Continuing Grant CONN over the last 15 seconds."
|
|
::= { rbPMCGServConnEntry 19 }
|
|
|
|
rbPMCGConnAvgSDUDropRate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of packets dropped per second for this connection, averaged over the last 15 seconds."
|
|
::= { rbPMCGServConnEntry 20 }
|
|
|
|
rbPMCGConnResetCounters OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Resets the connection counters in this table entry"
|
|
::= { rbPMCGServConnEntry 21 }
|
|
|
|
|
|
-- ###############################################################################
|
|
-- Per Connection Service Performance Indicators
|
|
-- ###############################################################################
|
|
|
|
rbPMServConnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbPMServConnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains performance indication parameters per each connection
|
|
in the currently active services. All Statistics counters for BE, RT and NRT connections
|
|
are accumulated since last reset. Counters for active CG connections
|
|
are accumulated from session start time."
|
|
::= { rbPMServ 2 }
|
|
|
|
rbPMServConnEntry OBJECT-TYPE
|
|
SYNTAX RbPMServConnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in the rbPMServConnTable "
|
|
INDEX {rbServiceID, rbPMConnDirection, rbPMConnQoSPipeIdx}
|
|
::= { rbPMServConnTable 1 }
|
|
|
|
RbPMServConnEntry ::= SEQUENCE {
|
|
rbPMConnDirection INTEGER,
|
|
rbPMConnQoSPipeIdx Integer32,
|
|
rbPMConnByteReq Counter32,
|
|
rbPMConnByteTx Counter32,
|
|
rbPMConnByteRetTx Counter32,
|
|
rbPMConnByteDropped Counter32,
|
|
rbPMConnByteDiscarded Counter32,
|
|
rbPMConnPktsReq Counter32,
|
|
rbPMConnPktsTx Counter32,
|
|
rbPMConnPktsDropped Counter32,
|
|
rbPMConnPktsDiscarded Counter32,
|
|
rbPMConnAvarageDelay Integer32,
|
|
rbPMConnStandardDeviationDelay Integer32,
|
|
rbPMConnMaxDelay Integer32,
|
|
rbPMConnCBP Gauge32,
|
|
rbPMConnDLI Gauge32,
|
|
rbPMConnExBurst Gauge32,
|
|
rbPMConnAvgThroughput Gauge32,
|
|
rbPMConnResetCounters INTEGER,
|
|
rbPMConnServiceIdx Unsigned32,
|
|
rbPMConnQoSType INTEGER,
|
|
rbPMConnQosParam1 Unsigned32,
|
|
rbPMConnQosParam2 Unsigned32,
|
|
rbPMConnQosParamTime INTEGER
|
|
}
|
|
|
|
|
|
rbPMConnDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
downLink (1),
|
|
upLink (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction of the connection."
|
|
::= { rbPMServConnEntry 1 }
|
|
|
|
rbPMConnQoSPipeIdx OBJECT-TYPE
|
|
SYNTAX Integer32 ( 1 .. 4 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the connection (up to 4) established for the Service."
|
|
::= { rbPMServConnEntry 2 }
|
|
|
|
rbPMConnByteReq OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes submitted by upper layers to this connection."
|
|
::= { rbPMServConnEntry 3 }
|
|
|
|
rbPMConnByteTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes transmitted to the wireless port through this connection,
|
|
including retransmissions."
|
|
::= { rbPMServConnEntry 4 }
|
|
|
|
rbPMConnByteRetTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes retransmitted to the wireless port through this connection."
|
|
::= { rbPMServConnEntry 5 }
|
|
|
|
rbPMConnByteDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes dropped from this connection due to congestion in the wireless link.
|
|
Identical to rbPMConnByteDiscarded."
|
|
::= { rbPMServConnEntry 6 }
|
|
|
|
rbPMConnByteDiscarded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes discarded from this connection due to congestion in the wireless link.
|
|
Identical to rbPMConnByteDropped."
|
|
::= { rbPMServConnEntry 7 }
|
|
|
|
rbPMConnPktsReq OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets submitted by upper layers to this connection."
|
|
::= { rbPMServConnEntry 8 }
|
|
|
|
rbPMConnPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets transmitted to the wireless port through this connection
|
|
not including retransmissions."
|
|
::= { rbPMServConnEntry 9 }
|
|
|
|
rbPMConnPktsDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets dropped by the transmitter for this connection due to
|
|
congestion in the wireless link. Identical to rbPMConnPktsDiscarded."
|
|
::= { rbPMServConnEntry 10 }
|
|
|
|
rbPMConnPktsDiscarded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets discarded by the transmitter for this connection due to
|
|
congestion in the wireless link. Identical to rbPMConnPktsDropped."
|
|
::= { rbPMServConnEntry 11 }
|
|
|
|
rbPMConnAvarageDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average packet delay in milliseconds, measured for this connection
|
|
over the last 15 seconds. The value is updated every 15 seconds."
|
|
::= { rbPMServConnEntry 12 }
|
|
|
|
rbPMConnStandardDeviationDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variance (the standard deviation squared) of the packet delay,
|
|
in milliseconds square, measured for this connection over the last 15 seconds.
|
|
The value is updated every 15 seconds."
|
|
::= { rbPMServConnEntry 13 }
|
|
|
|
rbPMConnMaxDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum packet delay in milliseconds, measured for this connection
|
|
over the last 15 seconds. The value is updated every 15 seconds."
|
|
::= { rbPMServConnEntry 14 }
|
|
|
|
rbPMConnCBP OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CIR utilization measured for an RT or NRT connection over the last 15 seconds.
|
|
Not applicable for BE and CG connections.
|
|
k = 100 x (the minimum between bytes transferred and CIR)/CIR is calculated for each
|
|
1 second interval. CIR Utilization equals the average of k over the last 15 seconds,
|
|
and may vary from 0 to 100. The value is updated every 15 seconds."
|
|
::= { rbPMServConnEntry 15 }
|
|
|
|
rbPMConnDLI OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The percentage of dropped packets, out of the total demand,
|
|
measured for this connection over the last 15 seconds.
|
|
DLI (%) = 100*(Packets Dropped)/(Packets Submitted).
|
|
The value is updated every 15 seconds."
|
|
::= { rbPMServConnEntry 16 }
|
|
|
|
rbPMConnExBurst OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Excess Information Rate utilization measured for a BE or NRT connection over the last 15 seconds.
|
|
Not applicable for RT and CG connections.
|
|
k=100 x (bytes transferred-CIR)/(MIR-CIR) is calculated for each 1 second interval.
|
|
In BE CIR = 0. The EIR Utilization equals the average of k over the last 15 seconds,
|
|
and may range from 0 to 100. The value is updated every 15 seconds."
|
|
::= { rbPMServConnEntry 17 }
|
|
|
|
rbPMConnAvgThroughput OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average throughput, in bits/second, measured for this connection
|
|
for the last 15 seconds. The value is updated every 15 seconds."
|
|
::= { rbPMServConnEntry 18 }
|
|
|
|
rbPMConnResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to reset (1), the Service counters will be initialized to 0.
|
|
noAction (0) value is available to support Get and Get Next commands.
|
|
It should not be used in Set commands."
|
|
::= { rbPMServConnEntry 19 }
|
|
|
|
rbPMConnServiceIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the relevant Service Entry."
|
|
::= { rbPMServConnEntry 20 }
|
|
|
|
rbPMConnQoSType OBJECT-TYPE
|
|
SYNTAX INTEGER { rbCG (1), rbRT ( 2 ) , rbNRT ( 3 ) , rbBE ( 4 ) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The QoS Type used in the connection."
|
|
::= { rbPMServConnEntry 21 }
|
|
|
|
rbPMConnQosParam1 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of rbQoSProfileParam1 of the QoS Profile used in the connection.
|
|
For RT and NRT connections, this parameter is the CIR (Kbps).
|
|
For CG connections this is the Packet Size (bytes).
|
|
For BE connection this parameter is not applicable."
|
|
::= { rbPMServConnEntry 22 }
|
|
|
|
rbPMConnQosParam2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of rbQoSProfileParam2 of the QoS Profile used in the connection.
|
|
For BE and NRT connections, this parameter is the MIR (Kbps).
|
|
For CG connections this is the Sample Interval (milliseconds).
|
|
For RT connections this parameter is not applicable."
|
|
::= { rbPMServConnEntry 23 }
|
|
|
|
rbPMConnQosParamTime OBJECT-TYPE
|
|
SYNTAX INTEGER { short ( 1 ) , medium ( 2 ) , long ( 3 ) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of rbQoSProfileParamTime of the QoS Profile used in the connection.
|
|
This is the CT (Committed Time) parameter that defines the time window over
|
|
which the information rate is averaged to ensure compliance with
|
|
the CIR and/or MIR parameter for BE, NRT and RT connections.
|
|
For CG connections this parameter is not applicable."
|
|
::= { rbPMServConnEntry 24 }
|
|
|
|
|
|
-- ####################################################################################
|
|
-- Packet Error Rate Counters
|
|
-- PER counters are collected per SU and are retrieved using community SU.<MAC Address>
|
|
-- ####################################################################################
|
|
rbPMPacketErrorRateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbPMPacketErrorRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Deprecated. A table that contains Packet Error Rate (PER) Counters"
|
|
::= { rbPerformance 4 }
|
|
|
|
rbPMPacketErrorRateEntry OBJECT-TYPE
|
|
SYNTAX RbPMPacketErrorRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Entry in the Packet Error Rate Table."
|
|
INDEX {rbPMDirection }
|
|
::= { rbPMPacketErrorRateTable 1 }
|
|
|
|
RbPMPacketErrorRateEntry ::= SEQUENCE {
|
|
rbPMDirection INTEGER,
|
|
rbPMTotalBursts Counter32,
|
|
rbPMErrorBursts Counter32,
|
|
rbPMResetCounters INTEGER
|
|
}
|
|
|
|
|
|
rbPMDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
downLink (1),
|
|
upLink (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The direction in which counters were measured."
|
|
::= { rbPMPacketErrorRateEntry 1 }
|
|
|
|
rbPMTotalBursts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of bursts received by SU since the last reset of counters."
|
|
::= { rbPMPacketErrorRateEntry 2 }
|
|
|
|
rbPMErrorBursts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of error bursts received by SU since the last reset of counters."
|
|
::= { rbPMPacketErrorRateEntry 3 }
|
|
|
|
rbPMResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"When Set to reset (1) PER Modulation Table counters are reset to 0."
|
|
::= { rbPMPacketErrorRateEntry 4 }
|
|
|
|
|
|
-- ####################################################################################
|
|
-- Reset ifTable Counters
|
|
-- For AU - <community>@AU.<Slot Number> is used.
|
|
-- For SU - <community>@SU.<MAC Address> is used
|
|
-- ####################################################################################
|
|
rbPMIfCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbPMIfCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Deprecated from version 2.1. A table of interface Counters.
|
|
It is recommended to use the rbPMIfCounters (rbNPUDataPortCounters, rbManagementPortCounters,
|
|
rbSUEthernetCounters, rbSUWirelessCounters, rbAUBackplaneCounters, rbAUWirelessCounters)
|
|
rather than these counters."
|
|
::= { rbPerformance 5 }
|
|
|
|
rbPMIfCountersEntry OBJECT-TYPE
|
|
SYNTAX RbPMIfCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Entry in the rbPMIfCountersTable."
|
|
INDEX { ifIndex }
|
|
::= { rbPMIfCountersTable 1 }
|
|
|
|
RbPMIfCountersEntry ::= SEQUENCE {
|
|
rbPMIfInResetCounters INTEGER,
|
|
rbPMIfInForwardedBytes Counter32,
|
|
rbPMIfInInternalBytes Counter32,
|
|
rbPMIfInDiscardedBytes Counter32,
|
|
rbPMIfOutInternalPackets Counter32,
|
|
rbPMIfOutResetCounters INTEGER,
|
|
rbPMIfOutSubmittedBytes Counter32,
|
|
rbPMIfOutInternalBytes Counter32,
|
|
rbPMIfOutDiscardedBytes Counter32
|
|
}
|
|
|
|
|
|
rbPMIfInResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"When set to reset (1), In counters of the specified interface on the specified
|
|
device will be initialised to 0."
|
|
::= { rbPMIfCountersEntry 1 }
|
|
|
|
rbPMIfInForwardedBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of bytes submitted to interface."
|
|
::= { rbPMIfCountersEntry 2 }
|
|
|
|
rbPMIfInInternalBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of bytes submitted to Internal Port."
|
|
::= { rbPMIfCountersEntry 3 }
|
|
|
|
rbPMIfInDiscardedBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of bytes discarded when received from the interface."
|
|
::= { rbPMIfCountersEntry 4 }
|
|
|
|
rbPMIfOutInternalPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of packets, created internally by device and transmitted through the
|
|
wireless interface. Value 0 should be returned for the Ethernet Interface."
|
|
::= { rbPMIfCountersEntry 5 }
|
|
|
|
rbPMIfOutResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"When set to reset (1), Out counters of the specified interface on the specified
|
|
device will be initialised to 0."
|
|
::= { rbPMIfCountersEntry 6 }
|
|
|
|
rbPMIfOutSubmittedBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of bytes submitted from intetface."
|
|
::= { rbPMIfCountersEntry 7 }
|
|
|
|
rbPMIfOutInternalBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of bytes submitted from Internal Port."
|
|
::= { rbPMIfCountersEntry 8 }
|
|
|
|
rbPMIfOutDiscardedBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of bytes discarded during the transmit through the interface."
|
|
::= { rbPMIfCountersEntry 9 }
|
|
|
|
|
|
-- ####################################################################################
|
|
-- Burst Error Rate Counters
|
|
-- ####################################################################################
|
|
|
|
rbPMBurstErrRateCounters OBJECT IDENTIFIER
|
|
::= { rbPerformance 6 }
|
|
|
|
rbPMBurstErrorRateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbPMBurstErrorRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains Burst Error Rate (BER) Counters for each Rate
|
|
in the Uplink and Downlink of each SU."
|
|
::= { rbPMBurstErrRateCounters 1 }
|
|
|
|
rbPMBurstErrorRateEntry OBJECT-TYPE
|
|
SYNTAX RbPMBurstErrorRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in the Burst Error Rate Table."
|
|
INDEX {rbPMBurstSuMacAddr, rbPMBurstDirection, rbPMBurstRate}
|
|
::= { rbPMBurstErrorRateTable 1 }
|
|
|
|
RbPMBurstErrorRateEntry ::= SEQUENCE {
|
|
rbPMBurstSuMacAddr MacAddress,
|
|
rbPMBurstDirection INTEGER,
|
|
rbPMBurstRate Modulation,
|
|
rbPMBurstCountersReset INTEGER,
|
|
rbPMBurstTotal Counter32,
|
|
rbPMBurstError Counter32,
|
|
rbPMBurstErrorRate DisplayString
|
|
}
|
|
|
|
|
|
rbPMBurstSuMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of SU."
|
|
::= { rbPMBurstErrorRateEntry 1 }
|
|
|
|
rbPMBurstDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
downLink (1),
|
|
upLink (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction in which counters were measured."
|
|
::= { rbPMBurstErrorRateEntry 2 }
|
|
|
|
rbPMBurstRate OBJECT-TYPE
|
|
SYNTAX Modulation
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Modulation and Coding Rate of the entry."
|
|
DEFVAL { 1 }
|
|
::= { rbPMBurstErrorRateEntry 3 }
|
|
|
|
rbPMBurstCountersReset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset the BER Counters for the selected SU, for all rates in the relevant direction.
|
|
noAction (0) value is available to support Get and Get Next commands.
|
|
It should not be used in Set commands."
|
|
::= { rbPMBurstErrorRateEntry 4 }
|
|
|
|
rbPMBurstTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Bursts transmitted to/from the SU at the relevant rate and direction."
|
|
::= { rbPMBurstErrorRateEntry 5 }
|
|
|
|
rbPMBurstError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Error Bursts at the relevant rate and direction."
|
|
::= { rbPMBurstErrorRateEntry 6 }
|
|
|
|
rbPMBurstErrorRate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Burst Error Rate for the relevant rate and direction (100*Burst Error/Burst Total)."
|
|
::= { rbPMBurstErrorRateEntry 7 }
|
|
|
|
|
|
-- ####################################################################################
|
|
-- ifTable Counters
|
|
-- For NPU .
|
|
-- For AU .
|
|
-- For SU .
|
|
-- ####################################################################################
|
|
|
|
rbPMIfCounters OBJECT IDENTIFIER
|
|
::= { rbPerformance 7 }
|
|
|
|
rbNPUDataPortCounters OBJECT IDENTIFIER
|
|
::= { rbPMIfCounters 1 }
|
|
|
|
rbMBSTDataPortCounters OBJECT IDENTIFIER
|
|
::= { rbPMIfCounters 2 }
|
|
|
|
rbManagementPortCounters OBJECT IDENTIFIER
|
|
::= { rbPMIfCounters 10 }
|
|
|
|
rbSUEthernetCounters OBJECT IDENTIFIER
|
|
::= { rbPMIfCounters 20 }
|
|
|
|
rbSUWirelessCounters OBJECT IDENTIFIER
|
|
::= { rbPMIfCounters 21 }
|
|
|
|
rbAUBackplaneCounters OBJECT IDENTIFIER
|
|
::= { rbPMIfCounters 30 }
|
|
|
|
rbAUWirelessCounters OBJECT IDENTIFIER
|
|
::= { rbPMIfCounters 31 }
|
|
|
|
|
|
-- ####################################################################################
|
|
rbNPUDataPortCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbNPUDataPortCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of NPU Data port counters."
|
|
::= { rbNPUDataPortCounters 1 }
|
|
|
|
rbNPUDataPortCountersEntry OBJECT-TYPE
|
|
SYNTAX RbNPUDataPortCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in the rbNPUDataPortCountersTable."
|
|
INDEX { rbPMIfSlot }
|
|
::= { rbNPUDataPortCountersTable 1 }
|
|
|
|
RbNPUDataPortCountersEntry ::= SEQUENCE {
|
|
rbPMIfSlot Integer32,
|
|
rbNpuDataPortResetCounters INTEGER,
|
|
rbNpuDataPortTotalPacketsRx Counter32,
|
|
rbNpuDataPortMangementPacketsFw Counter32,
|
|
rbNpuDataPortPacketsFwToSlot1 Counter32,
|
|
rbNpuDataPortPacketsFwToSlot2 Counter32,
|
|
rbNpuDataPortPacketsFwToSlot3 Counter32,
|
|
rbNpuDataPortPacketsFwToSlot4 Counter32,
|
|
rbNpuDataPortPacketsFwToSlot7 Counter32,
|
|
rbNpuDataPortPacketsFwToSlot8 Counter32,
|
|
rbNpuDataPortPacketsFwToSlot9 Counter32,
|
|
rbNpuDataPortPacketsDiscardedOnRx Counter32,
|
|
rbNpuDataPortTotalPacketsTx Counter32,
|
|
rbNpuDataPortMangementPacketsSbmt Counter32,
|
|
rbNpuDataPortPacketsSbmtFromSlot1 Counter32,
|
|
rbNpuDataPortPacketsSbmtFromSlot2 Counter32,
|
|
rbNpuDataPortPacketsSbmtFromSlot3 Counter32,
|
|
rbNpuDataPortPacketsSbmtFromSlot4 Counter32,
|
|
rbNpuDataPortPacketsSbmtFromSlot7 Counter32,
|
|
rbNpuDataPortPacketsSbmtFromSlot8 Counter32,
|
|
rbNpuDataPortPacketsSbmtFromSlot9 Counter32,
|
|
rbNpuDataPortPacketsDiscardedOnTx Counter32
|
|
}
|
|
|
|
|
|
rbPMIfSlot OBJECT-TYPE
|
|
SYNTAX Integer32 ( 5 .. 6 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPU's slot number: 5 or 6. In current version only 5 is applicable."
|
|
::= { rbNPUDataPortCountersEntry 1 }
|
|
|
|
rbNpuDataPortResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to reset (1), the Data port counters will be initialized to 0.
|
|
noAction (0) value is available to support Get and Get Next commands.
|
|
It should not be used in Set commands."
|
|
::= { rbNPUDataPortCountersEntry 2 }
|
|
|
|
rbNpuDataPortTotalPacketsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received on the interface.
|
|
Packets with errors are not counted."
|
|
::= { rbNPUDataPortCountersEntry 3 }
|
|
|
|
rbNpuDataPortMangementPacketsFw OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of management packets
|
|
(packets whose destination is the NPU, and broadcasts)
|
|
received on the Data port and forwarded to the NPU's internal management."
|
|
::= { rbNPUDataPortCountersEntry 4 }
|
|
|
|
rbNpuDataPortPacketsFwToSlot1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received from the Data port and forwarded
|
|
by the NPU to AU Slot 1."
|
|
::= { rbNPUDataPortCountersEntry 5 }
|
|
|
|
rbNpuDataPortPacketsFwToSlot2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received from the Data port and forwarded
|
|
by the NPU to AU Slot 2."
|
|
::= { rbNPUDataPortCountersEntry 6 }
|
|
|
|
rbNpuDataPortPacketsFwToSlot3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received from the Data port and forwarded
|
|
by the NPU to AU Slot 3."
|
|
::= { rbNPUDataPortCountersEntry 7 }
|
|
|
|
rbNpuDataPortPacketsFwToSlot4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received from the Data port and forwarded
|
|
by the NPU to AU Slot 4."
|
|
::= { rbNPUDataPortCountersEntry 8 }
|
|
|
|
rbNpuDataPortPacketsFwToSlot7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received from the Data port and forwarded
|
|
by the NPU to AU Slot 7."
|
|
::= { rbNPUDataPortCountersEntry 9 }
|
|
|
|
rbNpuDataPortPacketsFwToSlot8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received from the Data port and forwarded
|
|
by the NPU to AU Slot 8."
|
|
::= { rbNPUDataPortCountersEntry 10 }
|
|
|
|
rbNpuDataPortPacketsFwToSlot9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received from the Data port and forwarded
|
|
by the NPU to AU Slot 9."
|
|
::= { rbNPUDataPortCountersEntry 11 }
|
|
|
|
rbNpuDataPortPacketsDiscardedOnRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received from the Data port that were discarded
|
|
due to switching and classification failures."
|
|
::= { rbNPUDataPortCountersEntry 12 }
|
|
|
|
rbNpuDataPortTotalPacketsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets transmitted to the interface.
|
|
Packets with errors are not counted.."
|
|
::= { rbNPUDataPortCountersEntry 13 }
|
|
|
|
rbNpuDataPortMangementPacketsSbmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of management packets submitted by the NPU to the Data port."
|
|
::= { rbNPUDataPortCountersEntry 14 }
|
|
|
|
rbNpuDataPortPacketsSbmtFromSlot1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received by the NPU from the AU in Slot 1
|
|
and submitted to the Data port."
|
|
::= { rbNPUDataPortCountersEntry 15 }
|
|
|
|
rbNpuDataPortPacketsSbmtFromSlot2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received by the NPU from the AU in Slot 2
|
|
and submitted to the Data port."
|
|
::= { rbNPUDataPortCountersEntry 16 }
|
|
|
|
rbNpuDataPortPacketsSbmtFromSlot3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received by the NPU from the AU in Slot 3
|
|
and submitted to the Data port."
|
|
::= { rbNPUDataPortCountersEntry 17 }
|
|
|
|
rbNpuDataPortPacketsSbmtFromSlot4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received by the NPU from the AU in Slot 4
|
|
and submitted to the Data port."
|
|
::= { rbNPUDataPortCountersEntry 18 }
|
|
|
|
rbNpuDataPortPacketsSbmtFromSlot7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received by the NPU from the AU in Slot 7
|
|
and submitted to the Data port."
|
|
::= { rbNPUDataPortCountersEntry 19 }
|
|
|
|
rbNpuDataPortPacketsSbmtFromSlot8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received by the NPU from the AU in Slot 8
|
|
and submitted to the Data port."
|
|
::= { rbNPUDataPortCountersEntry 20 }
|
|
|
|
rbNpuDataPortPacketsSbmtFromSlot9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received by the NPU from the AU in Slot 9
|
|
and submitted to the Data port."
|
|
::= { rbNPUDataPortCountersEntry 21 }
|
|
|
|
rbNpuDataPortPacketsDiscardedOnTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Always 0. Currently packets are not discarded on Tx to the Data port."
|
|
::= { rbNPUDataPortCountersEntry 22 }
|
|
|
|
|
|
-- ####################################################################################
|
|
rbMBSTDataPortCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbMBSTDataPortCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of MBST Data port counters."
|
|
::= { rbMBSTDataPortCounters 1 }
|
|
|
|
rbMBSTDataPortCountersEntry OBJECT-TYPE
|
|
SYNTAX RbMBSTDataPortCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in the rbMBSTDataPortCountersTable."
|
|
INDEX { rbMBSTDataPortIfSlot }
|
|
::= { rbMBSTDataPortCountersTable 1 }
|
|
|
|
RbMBSTDataPortCountersEntry ::= SEQUENCE {
|
|
rbMBSTDataPortIfSlot Integer32,
|
|
rbMBSTDataPortResetCounters INTEGER,
|
|
rbMBSTDataPortTotalBytesRx Counter32,
|
|
rbMBSTDataPortDataBytesRx Counter32,
|
|
rbMBSTDataPortDataBytesDiscardedOnRx Counter32,
|
|
rbMBSTDataPortTotalBytesTx Counter32,
|
|
rbMBSTDataPortDataBytesTx Counter32,
|
|
rbMBSTDataPortDataBytesDiscardedOnTx Counter32
|
|
}
|
|
|
|
|
|
rbMBSTDataPortIfSlot OBJECT-TYPE
|
|
SYNTAX Integer32 ( 1 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MBST Data Port Table index - always 1."
|
|
::= { rbMBSTDataPortCountersEntry 1 }
|
|
|
|
rbMBSTDataPortResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to reset (1), the Data port counters will be initialized to 0.
|
|
noAction (0) value is available to support Get and Get Next commands.
|
|
It should not be used in Set commands."
|
|
::= { rbMBSTDataPortCountersEntry 2 }
|
|
|
|
rbMBSTDataPortTotalBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes received from the Data port, including Management frames.
|
|
Frames with errors are not included."
|
|
::= { rbMBSTDataPortCountersEntry 3 }
|
|
|
|
rbMBSTDataPortDataBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes received from the Data port.
|
|
Management frames and frames with errors are not included."
|
|
::= { rbMBSTDataPortCountersEntry 4 }
|
|
|
|
rbMBSTDataPortDataBytesDiscardedOnRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes in data packets received from the Data port
|
|
that were discarded due to switching and classification failures."
|
|
::= { rbMBSTDataPortCountersEntry 5 }
|
|
|
|
rbMBSTDataPortTotalBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes transmitted to the Data port, including Management frames.
|
|
Frames with errors are not included."
|
|
::= { rbMBSTDataPortCountersEntry 6 }
|
|
|
|
rbMBSTDataPortDataBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes transmitted to the Data port.
|
|
Management frames and frames with errors are not included."
|
|
::= { rbMBSTDataPortCountersEntry 7 }
|
|
|
|
rbMBSTDataPortDataBytesDiscardedOnTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This count is always 0 (No discards)."
|
|
::= { rbMBSTDataPortCountersEntry 8 }
|
|
|
|
|
|
-- ####################################################################################
|
|
rbMngmntPortCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbMngmntPortCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Management port counters."
|
|
::= { rbManagementPortCounters 1 }
|
|
|
|
rbMngmntPortCountersEntry OBJECT-TYPE
|
|
SYNTAX RbMngmntPortCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in the rbMngmntPortCountersTable."
|
|
INDEX { rbMngmntPortIfSlot }
|
|
::= { rbMngmntPortCountersTable 1 }
|
|
|
|
RbMngmntPortCountersEntry ::= SEQUENCE {
|
|
rbMngmntPortResetCounters INTEGER,
|
|
rbMngmntPortPacketsRx Counter32,
|
|
rbMngmntPortPacketsDiscardedOnRx Counter32,
|
|
rbMngmntPortPacketsTx Counter32,
|
|
rbMngmntPortPacketsDiscardedOnTx Counter32,
|
|
rbMngmntPortIfSlot Integer32
|
|
}
|
|
|
|
|
|
rbMngmntPortResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to reset (1), the Management port counters will be initialized to 0.
|
|
noAction (0) value is available to support Get and Get Next commands.
|
|
It should not be used in Set commands."
|
|
::= { rbMngmntPortCountersEntry 1 }
|
|
|
|
rbMngmntPortPacketsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received on the Management port.
|
|
Error packets are not counted."
|
|
::= { rbMngmntPortCountersEntry 2 }
|
|
|
|
rbMngmntPortPacketsDiscardedOnRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received on the Management port that were discarded."
|
|
::= { rbMngmntPortCountersEntry 3 }
|
|
|
|
rbMngmntPortPacketsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets transmitted on the Management port.
|
|
Error packets are not counted."
|
|
::= { rbMngmntPortCountersEntry 4 }
|
|
|
|
rbMngmntPortPacketsDiscardedOnTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packet discarded on Tx on the Management port."
|
|
::= { rbMngmntPortCountersEntry 5 }
|
|
|
|
rbMngmntPortIfSlot OBJECT-TYPE
|
|
SYNTAX Integer32 ( 1 .. 6 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For NPU - the NPU's slot number: 5 or 6. In current version only 5 is applicable.
|
|
For MBST - the MBST Management Port Table index (always 1)."
|
|
::= { rbMngmntPortCountersEntry 6 }
|
|
|
|
|
|
-- ####################################################################################
|
|
rbSUEthernetCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbSUEthernetCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of SU Ethernet port Counters"
|
|
::= { rbSUEthernetCounters 1 }
|
|
|
|
rbSUEthernetCountersEntry OBJECT-TYPE
|
|
SYNTAX RbSUEthernetCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in the rbSUEthernetCountersTable."
|
|
INDEX { rbPMIfSuMacAddr }
|
|
::= { rbSUEthernetCountersTable 1 }
|
|
|
|
RbSUEthernetCountersEntry ::= SEQUENCE {
|
|
rbPMIfSuMacAddr MacAddress,
|
|
rbSUEthernetResetCounters INTEGER,
|
|
rbSUEthernetDataBytesRx Counter32,
|
|
rbSUEthernetDataBytesDiscardedOnRx Counter32,
|
|
rbSUEthernetDataBytesTx Counter32,
|
|
rbSUEthernetDataBytesDiscardedOnTx Counter32
|
|
}
|
|
|
|
|
|
rbPMIfSuMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of SU."
|
|
::= { rbSUEthernetCountersEntry 1 }
|
|
|
|
rbSUEthernetResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to reset (1), the SU Ethernet port counters will be initialized to 0.
|
|
noAction (0) value is available to support Get and Get Next commands.
|
|
It should not be used in Set commands."
|
|
::= { rbSUEthernetCountersEntry 2 }
|
|
|
|
rbSUEthernetDataBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes received on the Ethernet port,
|
|
excluding management frames and errors."
|
|
::= { rbSUEthernetCountersEntry 3 }
|
|
|
|
rbSUEthernetDataBytesDiscardedOnRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes discarded when a packet received
|
|
from the Ethernet is not forwarded to the Wireless port due to bridging
|
|
and classification considerations."
|
|
::= { rbSUEthernetCountersEntry 4 }
|
|
|
|
rbSUEthernetDataBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes transmitted on the Ethernet port,
|
|
excluding management frames and errors."
|
|
::= { rbSUEthernetCountersEntry 5 }
|
|
|
|
rbSUEthernetDataBytesDiscardedOnTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes discarded when a packet received on
|
|
the Wireless port is not forwarded to the Ethernet due to bridging
|
|
and VLAN considerations."
|
|
::= { rbSUEthernetCountersEntry 6 }
|
|
|
|
|
|
-- ####################################################################################
|
|
rbSUWirelessCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbSUWirelessCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of SU Wireless port Counters."
|
|
::= { rbSUWirelessCounters 1 }
|
|
|
|
rbSUWirelessCountersEntry OBJECT-TYPE
|
|
SYNTAX RbSUWirelessCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in the rbSUWirelessCountersTable."
|
|
INDEX { rbPMIfSuMacAddr }
|
|
::= { rbSUWirelessCountersTable 1 }
|
|
|
|
RbSUWirelessCountersEntry ::= SEQUENCE {
|
|
rbSUWirelessResetCounters INTEGER,
|
|
rbSUWirelessDataBytesRx Counter32,
|
|
rbSUWirelessDataBytesDiscardedOnRx Counter32,
|
|
rbSUWirelessDataBytesTx Counter32,
|
|
rbSUWirelessDataBytesDiscardedOnTx Counter32,
|
|
rbSUWirelessARQEnabledBytesTx Counter32,
|
|
rbSUWirelessRTxBytes Counter32,
|
|
rbSUWirelessRTxRate Gauge32
|
|
}
|
|
|
|
|
|
rbSUWirelessResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to reset (1), the SU Wireless port counters will be initialized to 0.
|
|
noAction (0) value is available to support Get and Get Next commands.
|
|
It should not be used in Set commands."
|
|
::= { rbSUWirelessCountersEntry 1 }
|
|
|
|
rbSUWirelessDataBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes received on the Wireless port,
|
|
excluding management frames and errors."
|
|
::= { rbSUWirelessCountersEntry 2 }
|
|
|
|
rbSUWirelessDataBytesDiscardedOnRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes in packets discarded on Rx
|
|
on the Wireless port due to MAC protocol RX errors, such as
|
|
duplicate sequence number, wrong sequence number etc. (not CRC errors)."
|
|
::= { rbSUWirelessCountersEntry 3 }
|
|
|
|
rbSUWirelessDataBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes transmitted on the Wireless port,
|
|
excluding MAC management frames and errors."
|
|
::= { rbSUWirelessCountersEntry 4 }
|
|
|
|
rbSUWirelessDataBytesDiscardedOnTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes in packets discarded on Tx
|
|
due to congestion in the wireless medium."
|
|
::= { rbSUWirelessCountersEntry 5 }
|
|
|
|
rbSUWirelessARQEnabledBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes transmitted over BE and NRT connections.
|
|
Applicable only if the ARQ mechanism is enabled."
|
|
::= { rbSUWirelessCountersEntry 6 }
|
|
|
|
rbSUWirelessRTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of unacknowledged bytes that were retransmitted.
|
|
Retransmissions are applicable only to BE and NRT connections
|
|
provided the ARQ mechanism is enabled."
|
|
::= { rbSUWirelessCountersEntry 7 }
|
|
|
|
rbSUWirelessRTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmission Rate in percents:
|
|
100*(Bytes Retransmitted)/(ARQ Enabled Bytes Transmitted)."
|
|
::= { rbSUWirelessCountersEntry 8 }
|
|
|
|
|
|
-- ####################################################################################
|
|
rbAUBackplaneCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbAUBackplaneCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Backplane (NPU/AU connection) Counters."
|
|
::= { rbAUBackplaneCounters 1 }
|
|
|
|
rbAUBackplaneCountersEntry OBJECT-TYPE
|
|
SYNTAX RbAUBackplaneCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in the rbAUBackplaneCountersTable."
|
|
INDEX { rbPMIfAUSlot }
|
|
::= { rbAUBackplaneCountersTable 1 }
|
|
|
|
RbAUBackplaneCountersEntry ::= SEQUENCE {
|
|
rbPMIfAUSlot Integer32,
|
|
rbAUBackplaneResetCounters INTEGER,
|
|
rbAUBackplaneDataBytesRx Counter32,
|
|
rbAUBackplaneDataBytesDiscardedOnRx Counter32,
|
|
rbAUBackplaneDataBytesTx Counter32,
|
|
rbAUBackplaneDataBytesDiscardedOnTx Counter32
|
|
}
|
|
|
|
|
|
rbPMIfAUSlot OBJECT-TYPE
|
|
SYNTAX Integer32 ( 1 .. 9 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Physical placement of the card in the chassis (the Slot number 1-4, 7-9)."
|
|
::= { rbAUBackplaneCountersEntry 1 }
|
|
|
|
rbAUBackplaneResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to reset (1), the Back plane port counters will be initialized to 0.
|
|
noAction (0) value is available to support Get and Get Next commands.
|
|
It should not be used in Set commands."
|
|
::= { rbAUBackplaneCountersEntry 2 }
|
|
|
|
rbAUBackplaneDataBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes received from the Back-panel (NPU),
|
|
excluding management frames and errors."
|
|
::= { rbAUBackplaneCountersEntry 3 }
|
|
|
|
rbAUBackplaneDataBytesDiscardedOnRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes in data packets discarded due to communication
|
|
errors between the AU and the NPU."
|
|
::= { rbAUBackplaneCountersEntry 4 }
|
|
|
|
rbAUBackplaneDataBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes transmitted to the Back-panel (NPU),
|
|
excluding management frames and errors."
|
|
::= { rbAUBackplaneCountersEntry 5 }
|
|
|
|
rbAUBackplaneDataBytesDiscardedOnTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This count is always 0 (No discards on Tx)."
|
|
::= { rbAUBackplaneCountersEntry 6 }
|
|
|
|
|
|
-- ####################################################################################
|
|
rbAUWirelessCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RbAUWirelessCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of AU Wireless port Counters."
|
|
::= { rbAUWirelessCounters 1 }
|
|
|
|
rbAUWirelessCountersEntry OBJECT-TYPE
|
|
SYNTAX RbAUWirelessCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in the rbAUWirelessCountersTable."
|
|
INDEX { rbAUWirelessAUSlot }
|
|
::= { rbAUWirelessCountersTable 1 }
|
|
|
|
RbAUWirelessCountersEntry ::= SEQUENCE {
|
|
rbAUWirelessResetCounters INTEGER,
|
|
rbAUWirelessDataBytesRx Counter32,
|
|
rbAUWirelessDataBytesDiscardedOnRx Counter32,
|
|
rbAUWirelessDataBytesTx Counter32,
|
|
rbAUWirelessDataBytesDiscardedOnTx Counter32,
|
|
rbAUWirelessARQEnabledBytesTx Counter32,
|
|
rbAUWirelessRTxBytes Counter32,
|
|
rbAUWirelessRTxRate Gauge32,
|
|
rbAUWirelessAUSlot Integer32
|
|
}
|
|
|
|
|
|
rbAUWirelessResetCounters OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction (0),
|
|
reset (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to reset (1), the AU Wireless port counters will be initialized to 0.
|
|
noAction (0) value is available to support Get and Get Next commands.
|
|
It should not be used in Set commands."
|
|
::= { rbAUWirelessCountersEntry 1 }
|
|
|
|
rbAUWirelessDataBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes received on the Wireless port,
|
|
excluding MAC management frames and errors."
|
|
::= { rbAUWirelessCountersEntry 2 }
|
|
|
|
rbAUWirelessDataBytesDiscardedOnRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes in packets received on the Wireless link
|
|
and discarded due to MAC protocol receive errors, such as
|
|
duplicate sequence number, wrong sequence number etc. (not CRC errors)."
|
|
::= { rbAUWirelessCountersEntry 3 }
|
|
|
|
rbAUWirelessDataBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of data bytes transmitted to the Wireless link,
|
|
excluding MAC Management frames and frames with errors."
|
|
::= { rbAUWirelessCountersEntry 4 }
|
|
|
|
rbAUWirelessDataBytesDiscardedOnTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes in packets discarded due to congestion in the wireless medium."
|
|
::= { rbAUWirelessCountersEntry 5 }
|
|
|
|
rbAUWirelessARQEnabledBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes transmitted over BE and NRT connections.
|
|
Applicable only if the ARQ mechanism is enabled."
|
|
::= { rbAUWirelessCountersEntry 6 }
|
|
|
|
rbAUWirelessRTxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of unacknowledged bytes that were retransmitted.
|
|
Retransmissions are applicable only to BE and NRT connections provided
|
|
the ARQ mechanism is enabled."
|
|
::= { rbAUWirelessCountersEntry 7 }
|
|
|
|
rbAUWirelessRTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmission Rate in percents:
|
|
100*(Bytes Retransmitted)/(ARQ Enabled Bytes Transmitted)."
|
|
::= { rbAUWirelessCountersEntry 8 }
|
|
|
|
rbAUWirelessAUSlot OBJECT-TYPE
|
|
SYNTAX Integer32 ( 1 .. 9 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For NPU - the physical placement of the card in the chassis (the Slot number 1-4, 7-9).
|
|
For MBST - the MBST Wireless port Table index (always 1)."
|
|
::= { rbAUWirelessCountersEntry 9 }
|
|
|
|
|
|
|
|
|
|
END
|
|
|
|
|
|
|