WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zyxel/ZYXEL-ves1616pe54-MIB

14960 lines
455 KiB
Plaintext
Raw Blame History

-- ZyXEL Communications Corporation
-- Private Enterprise MIB definition
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
-- It contains ZyXEL products OIDs, and common managed objects.
ZYXEL-ves1616pe54-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises FROM RFC1155-SMI
OBJECT-TYPE
FROM SNMPv2-SMI -- RFC2578
RowStatus, DateAndTime, TruthValue, StorageType, MacAddress
FROM SNMPv2-TC -- RFC2579
DisplayString
FROM RFC1213-MIB
EnabledStatus
FROM P-BRIDGE-MIB
PortList
FROM Q-BRIDGE-MIB
dot1dBasePort
FROM BRIDGE-MIB
InterfaceIndexOrZero -- RFC2863
FROM IF-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC2571
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB -- RFC2851
OperationResponseStatus
FROM DISMAN-PING-MIB
vdslLineConfProfileName
FROM VDSL-LINE-MIB
vdslLineAlarmConfProfileName
FROM VDSL-LINE-MIB
vdslPerf1DayIntervalNumber
FROM VDSL-LINE-MIB
vdslPhysSide
FROM VDSL-LINE-MIB
ifIndex
FROM IF-MIB
vdslPerfIntervalNumber
FROM VDSL-LINE-MIB
dot1qVlanIndex
FROM Q-BRIDGE-MIB
Dot1agCfmMepId
FROM IEEE8021-CFM-MIB
Xdsl2RaMode
FROM VDSL2-LINE-TC-MIB
Xdsl2LineLdsf
FROM VDSL2-LINE-TC-MIB
xdsl2PMChHist1DInterval
FROM VDSL2-LINE-MIB
xdsl2LineBand
FROM VDSL2-LINE-MIB
xdsl2LineSegmentDirection
FROM VDSL2-LINE-MIB
xdsl2LineSegment
FROM VDSL2-LINE-MIB
xdsl2SCStatusDirection
FROM VDSL2-LINE-MIB
xdsl2SCStatusBand
FROM VDSL2-LINE-MIB
xdsl2PMLHist15MUnit
FROM VDSL2-LINE-MIB
xdsl2PMLHist15MInterval
FROM VDSL2-LINE-MIB
xdsl2PMLHist1DUnit
FROM VDSL2-LINE-MIB
xdsl2PMLHist1DInterval
FROM VDSL2-LINE-MIB
xdsl2PMChCurrUnit
FROM VDSL2-LINE-MIB
xdsl2PMChHist15MUnit
FROM VDSL2-LINE-MIB
xdsl2PMChHist15MInterval
FROM VDSL2-LINE-MIB
xdsl2PMLCurrUnit
FROM VDSL2-LINE-MIB
xdsl2PMChHist1DUnit
FROM VDSL2-LINE-MIB
xdsl2LConfTempTemplateName
FROM VDSL2-LINE-MIB
xdsl2LConfProfProfileName
FROM VDSL2-LINE-MIB
xdsl2ChConfProfProfileName
FROM VDSL2-LINE-MIB
xdsl2LAlarmConfTempTemplateName
FROM VDSL2-LINE-MIB
xdsl2LineAlarmConfProfileName
FROM VDSL2-LINE-MIB
xdsl2ChAlarmConfProfileName
FROM VDSL2-LINE-MIB
IpAddress
FROM SNMPv2-SMI
Ipv6Address
FROM IPV6-TC
NOTIFICATION-TYPE
FROM SNMPv2-SMI
sysObjectID
FROM RFC1213-MIB
BridgeId, Timeout
FROM BRIDGE-MIB
HCPerfIntervalThreshold,
HCPerfTimeElapsed
FROM HC-PerfHist-TC-MIB; -- [RFC3705]
zyxel OBJECT IDENTIFIER ::= { enterprises 890 }
products OBJECT IDENTIFIER ::= { zyxel 1 }
accessSwitch OBJECT IDENTIFIER ::= { products 5 }
vesSeries OBJECT IDENTIFIER ::= { accessSwitch 12 }
ves1616pe54 OBJECT IDENTIFIER ::= { vesSeries 37 }
--
-- textual conventions used in this MIB
--
Vdsl2Band ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Identifies a band in a
VDSL2/ADSL/ADSL2/ADSL2+
link. For a band in the upstream direction,
transmission is from the remote end (xTU-R)
towards the central office end (xTU-C).
A band in the upstream direction is
indicated by upstream(1) for
ADSL/ADSL2/ADSL2+ single band, or any of
us0(3), us1(5), us2(7), us3(9), or us4(11) for
VDSL2 multiple bands.
For a band in the downstream direction,
transmission is from the xTU-C towards the xTU-R.
A band in the downstream direction is
indicated by downstream(2) for
ADSL/ADSL2/ADSL2+ single band, or any of
ds1(4), ds2(6), ds3(8), or ds4(10) for
VDSL2 multiple bands.
Specified as an INTEGER,
the values are defined as follows:"
SYNTAX INTEGER {
upstream(1), -- Transmission from the ATU-R to the ATU-C
-- (ADSL/ADSL2/ADSL2+).
downstream(2), -- Transmission from the ATU-C to the ATU-R
--(ADSL/ADSL2/ADSL2+).
us0(3), -- Upstream band number 0 (US0) (VDSL2).
ds1(4), -- Downstream band number 1 (DS1) (VDSL2).
us1(5), -- Upstream band number 1 (US1) (VDSL2).
ds2(6), -- Downstream band number 2 (DS2) (VDSL2).
us2(7), -- Upstream band number 2 (US2) (VDSL2).
ds3(8), -- Downstream band number 3 (DS3) (VDSL2).
us3(9), -- Upstream band number 3 (US3) (VDSL2).
ds4(10), -- Downstream band number 4 (DS4) (VDSL2).
us4(11) -- Upstream band number 4 (US4) (VDSL2).
}
-- sysInfo
sysInfo OBJECT IDENTIFIER ::= { ves1616pe54 1 }
sysSwPlatformMajorVers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SW platform major version, e.g. 3."
::= { sysInfo 1 }
sysSwPlatformMinorVers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SW platform minor version, e.g. 50."
::= { sysInfo 2 }
sysSwModelString OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Model letters, e.g. TJ"
::= { sysInfo 3 }
sysSwVersionControlNbr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Version control number, e.g. 0."
::= { sysInfo 4 }
sysSwDay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SW compilation day, e.g. 19."
::= { sysInfo 5 }
sysSwMonth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SW compilation month, e.g. 8."
::= { sysInfo 6 }
sysSwYear OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SW compilation year, e.g. 2004."
::= { sysInfo 7 }
sysHwMajorVers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HW major version number, e.g. 1."
::= { sysInfo 8 }
sysHwMinorVers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HW minor version number, e.g. 0."
::= { sysInfo 9 }
sysSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Serial number"
::= { sysInfo 10 }
sysFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"VDSL Switch Firmware Version"
::= { sysInfo 11 }
sysModemCodeVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"VDSL Modem Code Version"
::= { sysInfo 12 }
sysPowerInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CO Power info"
::= { sysInfo 13 }
sysSwBootUpImage OBJECT-TYPE
SYNTAX INTEGER{
image_1(1),
image_2(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current system boot up image,
You can change the boot up image of next rebooting by setting sysMgmtBootupImage."
::= { sysInfo 14 }
sysImage1FwVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"VDSL Switch Image 1 Firmware Version"
::= { sysInfo 15 }
sysImage2FwVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"VDSL Switch Image 2 Firmware Version"
::= { sysInfo 16 }
-- brLimitSetup
brLimitSetup OBJECT IDENTIFIER ::= { ves1616pe54 3 }
brLimitState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Broadcast/multicast/DLF rate limiting enabled/disabled for the switch."
::= { brLimitSetup 1 }
-- brLimitPortTable
brLimitPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrLimitPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { brLimitSetup 2 }
brLimitPortEntry OBJECT-TYPE
SYNTAX BrLimitPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in brLimitPortTable."
INDEX { dot1dBasePort }
::= { brLimitPortTable 1 }
BrLimitPortEntry ::=
SEQUENCE {
brLimitPortBrState EnabledStatus,
brLimitPortBrRate INTEGER,
brLimitPortMcState EnabledStatus,
brLimitPortMcRate INTEGER,
brLimitPortDlfState EnabledStatus,
brLimitPortDlfRate INTEGER
}
brLimitPortBrState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Broadcast rate limiting enabled/disabled on the port."
::= { brLimitPortEntry 1 }
brLimitPortBrRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Allowed broadcast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143."
::= { brLimitPortEntry 2 }
brLimitPortMcState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Multicast rate limiting enabled/disabled on the port."
::= { brLimitPortEntry 3 }
brLimitPortMcRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"AAllowed mullticast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143."
::= { brLimitPortEntry 4 }
brLimitPortDlfState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination lookup failure frames rate limiting enabled/disabled on the port."
::= { brLimitPortEntry 5 }
brLimitPortDlfRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Allowed destination lookup failure frames rate in pkts/s.
For FE port, the maximum value is 148800. For GE port, the maximum value is 262143."
::= { brLimitPortEntry 6 }
-- portSecuritySetup
portSecuritySetup OBJECT IDENTIFIER ::= { ves1616pe54 4 }
portSecurityState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0: disable, 1:enable port security, 2:enable vlan security"
::= { portSecuritySetup 1 }
portSecurityPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecurityPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { portSecuritySetup 2 }
portSecurityPortEntry OBJECT-TYPE
SYNTAX PortSecurityPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portSecurityPortTable."
INDEX { dot1dBasePort }
::= { portSecurityPortTable 1 }
PortSecurityPortEntry ::=
SEQUENCE {
portSecurityPortState EnabledStatus,
portSecurityPortLearnState EnabledStatus,
portSecurityPortCount INTEGER
}
portSecurityPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port Security enabled/disabled on the port.
Active(1) means this port only accept frames from static MAC addresses that are configured for the port,
and dynamic MAC address frames up to the number specified by portSecurityPortCount object."
::= { portSecurityPortEntry 1 }
portSecurityPortLearnState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MAC address learning enabled/disable on the port."
::= { portSecurityPortEntry 2 }
portSecurityPortCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of (dynamic) MAC addresses that may be learned on the port."
::= { portSecurityPortEntry 3 }
portSecurityMacFreeze OBJECT-TYPE
SYNTAX PortList
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This entry is used to execute MacFreeze action to port.
It's meaningless while reading this entry."
::= { portSecuritySetup 3 }
-- vlanTrunkPortTable
vlanTrunkSetup OBJECT IDENTIFIER ::= { ves1616pe54 5 }
vlanTrunkPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanTrunkPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanTrunkSetup 1 }
vlanTrunkPortEntry OBJECT-TYPE
SYNTAX VlanTrunkPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlanTrunkPortTable."
INDEX { dot1dBasePort }
::= { vlanTrunkPortTable 1 }
VlanTrunkPortEntry ::=
SEQUENCE {
vlanTrunkPortState EnabledStatus
}
vlanTrunkPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VlanTrunking enabled/disabled on the port.
Active(1) to allow frames belonging to unknown
VLAN groups to pass through the switch."
::= { vlanTrunkPortEntry 1 }
-- ctlProtTransSetup
ctlProtTransSetup OBJECT IDENTIFIER ::= { ves1616pe54 6 }
ctlProtTransState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bridge control protocol transparency enabled/disabled for the switch"
::= { ctlProtTransSetup 1 }
-- ctlProtTransTunnelPortTable
ctlProtTransTunnelPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtlProtTransTunnelPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { ctlProtTransSetup 2 }
ctlProtTransTunnelPortEntry OBJECT-TYPE
SYNTAX CtlProtTransTunnelPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in ctlProtTransTunnelPortTable."
INDEX { dot1dBasePort }
::= { ctlProtTransTunnelPortTable 1 }
CtlProtTransTunnelPortEntry ::=
SEQUENCE {
ctlProtTransTunnelMode INTEGER
}
ctlProtTransTunnelMode OBJECT-TYPE
SYNTAX INTEGER{
peer(0),
tunnel(1),
discard(2),
network(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bridge control protocol transparency mode for the port.
Modes: Peer(0), Tunnel(1), Discard(2), Network(3)"
::= { ctlProtTransTunnelPortEntry 1 }
-- vlanStackSetup
vlanStackSetup OBJECT IDENTIFIER ::= { ves1616pe54 7 }
vlanStackState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN Stacking enabled/disabled for the switch."
::= { vlanStackSetup 1 }
vlanStackTpid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP TPID in hex format, e.g. 8100."
::= { vlanStackSetup 2 }
-- vlanStackPortTable
vlanStackPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanStackPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanStackSetup 3 }
vlanStackPortEntry OBJECT-TYPE
SYNTAX VlanStackPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlanStackPortTable."
INDEX { dot1dBasePort }
::= { vlanStackPortTable 1 }
VlanStackPortEntry ::=
SEQUENCE {
vlanStackPortMode INTEGER,
vlanStackPortVid INTEGER,
vlanStackPortPrio INTEGER,
vlanStackTunnelPortTpid INTEGER,
vlanStackPCopyCtagPrio EnabledStatus
}
vlanStackPortMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
access(2),
tunnel(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Mode of the port. Set Normal to have the switch ignore frames received
(or transmitted) on this port with VLAN stacking tags.
Anything you configure in SPVID and Priority are ignored.
Set Access mode to have the switch add the SP TPID tag to all incoming
frames received on this port. Set Access mode for ingress ports at the
edge of the service provider's network. Set Tunnel mode (available for
Gigabit ports only) for egress ports at the edge of the service provider's
network. In order to support VLAN stacking on a port, the port must be able
to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag)
to pass through it. normal (1), Access (2), tunnel (3)"
::= { vlanStackPortEntry 1 }
vlanStackPortVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN ID used in service provider tag."
::= { vlanStackPortEntry 2 }
vlanStackPortPrio OBJECT-TYPE
SYNTAX INTEGER {
prioriry-0(0),
prioriry-1(1),
prioriry-2(2),
prioriry-3(3),
prioriry-4(4),
prioriry-5(5),
prioriry-6(6),
prioriry-7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Priority value for service provider tag.
0 is the lowest priority level and 7 is the highest."
::= { vlanStackPortEntry 3 }
vlanStackTunnelPortTpid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Tunnel Port TPID in hex format, e.g. 8100."
::= { vlanStackPortEntry 4 }
vlanStackPCopyCtagPrio OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { vlanStackPortEntry 5 }
-- selectiveQinQTable
selectiveQinQTable OBJECT-TYPE
SYNTAX SEQUENCE OF SelectiveQinQEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanStackSetup 4 }
selectiveQinQEntry OBJECT-TYPE
SYNTAX SelectiveQinQEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in selective qinq table"
INDEX { selectiveQinQPort, selectiveQinQCvid }
::= { selectiveQinQTable 1 }
SelectiveQinQEntry ::=
SEQUENCE {
selectiveQinQName DisplayString,
selectiveQinQPort INTEGER,
selectiveQinQCvid INTEGER,
selectiveQinQSpvid INTEGER,
selectiveQinQPriority INTEGER,
selectiveQinQRowStatus RowStatus,
selectiveQinQACtivePrio EnabledStatus
}
selectiveQinQName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of selective qinq entry"
::= { selectiveQinQEntry 1 }
selectiveQinQPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"interface port id"
::= { selectiveQinQEntry 2 }
selectiveQinQCvid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"inner vid"
::= { selectiveQinQEntry 3 }
selectiveQinQSpvid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"outer vid"
::= { selectiveQinQEntry 4 }
selectiveQinQPriority OBJECT-TYPE
SYNTAX INTEGER {
prioriry-0(0),
prioriry-1(1),
prioriry-2(2),
prioriry-3(3),
prioriry-4(4),
prioriry-5(5),
prioriry-6(6),
prioriry-7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"priority"
::= { selectiveQinQEntry 5 }
selectiveQinQACtivePrio OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Use the value for priority for Stag"
::= { selectiveQinQEntry 7 }
selectiveQinQRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { selectiveQinQEntry 6 }
-- PortBasedInnerQTable
portBasedInnerQTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortBasedInnerQEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanStackSetup 5 }
portBasedInnerQEntry OBJECT-TYPE
SYNTAX PortBasedInnerQEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in PortBasedInnerQTable."
INDEX { dot1dBasePort }
::= { portBasedInnerQTable 1 }
PortBasedInnerQEntry ::=
SEQUENCE {
portBasedInnerQVid INTEGER,
portBasedInnerQPrio INTEGER,
portBasedInnerQActive EnabledStatus,
portBasedInnerQTxUntag EnabledStatus
}
portBasedInnerQVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN ID used in inner tag."
::= { portBasedInnerQEntry 1 }
portBasedInnerQPrio OBJECT-TYPE
SYNTAX INTEGER {
prioriry-0(0),
prioriry-1(1),
prioriry-2(2),
prioriry-3(3),
prioriry-4(4),
prioriry-5(5),
prioriry-6(6),
prioriry-7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Priority value for inner tag.
0 is the lowest priority level and 7 is the highest."
::= { portBasedInnerQEntry 2 }
portBasedInnerQActive OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portBasedInnerQEntry 3 }
portBasedInnerQTxUntag OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Tx without Ctag (Only active when innerQ is enable)"
::= { portBasedInnerQEntry 4 }
-- dot1xSetup
dot1xSetup OBJECT IDENTIFIER ::= { ves1616pe54 8 }
-- portAuthState
portAuthState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1x port authentication enabled/disabled for the switch."
::= { dot1xSetup 3 }
-- 8021xPortAuthTable
portAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortAuthEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { dot1xSetup 4 }
portAuthEntry OBJECT-TYPE
SYNTAX PortAuthEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portAuthTable."
INDEX { dot1dBasePort }
::= { portAuthTable 1 }
PortAuthEntry ::=
SEQUENCE {
portAuthEntryState EnabledStatus,
portReAuthEntryState EnabledStatus,
portReAuthEntryTimer INTEGER
}
portAuthEntryState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1x port authentication enabled or disabled on the port."
::= { portAuthEntry 1 }
portReAuthEntryState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1x port re-authentication enabled or disabled on the port."
::= { portAuthEntry 2 }
portReAuthEntryTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Re-authentication timer in seconds."
::= { portAuthEntry 3 }
-- hardwareInfo
hwMonitorInfo OBJECT IDENTIFIER ::= { ves1616pe54 9 }
-- fabRpmTable
fanRpmTable OBJECT-TYPE
SYNTAX SEQUENCE OF FanRpmEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { hwMonitorInfo 1 }
fanRpmEntry OBJECT-TYPE
SYNTAX FanRpmEntry
ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in fanRpmTable."
INDEX { fanRpmIndex }
::= { fanRpmTable 1 }
FanRpmEntry ::=
SEQUENCE {
fanRpmIndex INTEGER,
fanRpmCurValue INTEGER,
fanRpmMaxValue INTEGER,
fanRpmMinValue INTEGER,
fanRpmLowThresh INTEGER,
fanRpmDescr DisplayString
}
fanRpmIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Index of FAN."
::= { fanRpmEntry 1 }
fanRpmCurValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Current speed in Revolutions Per Minute (RPM) on the fan."
::= { fanRpmEntry 2 }
fanRpmMaxValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Maximum speed measured in Revolutions Per Minute (RPM) on the fan."
::= { fanRpmEntry 3 }
fanRpmMinValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Minimum speed measured in Revolutions Per Minute (RPM) on the fan."
::= { fanRpmEntry 4 }
fanRpmLowThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The minimum speed at which a normal fan should work."
::= { fanRpmEntry 5 }
fanRpmDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"'Normal' indicates that this fan is functioning above the minimum speed.
'Error' indicates that this fan is functioning below the minimum speed."
::= { fanRpmEntry 6 }
-- tempTable
tempTable OBJECT-TYPE
SYNTAX SEQUENCE OF TempEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { hwMonitorInfo 2 }
tempEntry OBJECT-TYPE
SYNTAX TempEntry
ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in tempTable."
INDEX { tempIndex }
::= { tempTable 1 }
TempEntry ::=
SEQUENCE {
tempIndex INTEGER,
tempCurValue INTEGER,
tempMaxValue INTEGER,
tempMinValue INTEGER,
tempHighThresh INTEGER,
tempDescr DisplayString
}
tempIndex OBJECT-TYPE
SYNTAX INTEGER {
mac (1),
cpu (2),
phy (3)
}
ACCESS read-only
STATUS current
DESCRIPTION
"Index of temperature unit. 1:MAC, 2:CPU, 3:PHY"
::= { tempEntry 1 }
tempCurValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The current temperature measured at this sensor."
::= { tempEntry 2 }
tempMaxValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum temperature measured at this sensor."
::= { tempEntry 3 }
tempMinValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The minimum temperature measured at this sensor."
::= { tempEntry 4 }
tempHighThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The upper temperature limit at this sensor."
::= { tempEntry 5 }
tempDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"'Normal' indicates temperatures below the threshold and 'Error' for those above."
::= { tempEntry 6 }
-- voltageTable
voltageTable OBJECT-TYPE
SYNTAX SEQUENCE OF VoltageEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { hwMonitorInfo 3 }
voltageEntry OBJECT-TYPE
SYNTAX VoltageEntry
ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in voltageTable."
INDEX { voltageIndex }
::= { voltageTable 1 }
VoltageEntry ::=
SEQUENCE {
voltageIndex INTEGER,
voltageCurValue INTEGER,
voltageMaxValue INTEGER,
voltageMinValue INTEGER,
voltageNominalValue INTEGER,
voltageLowThresh INTEGER,
voltageDescr DisplayString
}
voltageIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Index of voltage."
::= { voltageEntry 1 }
voltageCurValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The current voltage reading."
::= { voltageEntry 2 }
voltageMaxValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum voltage measured at this point."
::= { voltageEntry 3 }
voltageMinValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The minimum voltage measured at this point."
::= { voltageEntry 4 }
voltageNominalValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The normal voltage at wchich the switch work."
::= { voltageEntry 5 }
voltageLowThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The minimum voltage at which the switch should work."
::= { voltageEntry 6 }
voltageDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"'Normal' indicates that the voltage is within an acceptable operating range
at this point; otherwise 'Error' is displayed."
::= { voltageEntry 7 }
-- snmpSetup
snmpSetup OBJECT IDENTIFIER ::= { ves1616pe54 10 }
snmpGetCommunity OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 1 }
snmpSetCommunity OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 2 }
snmpTrapCommunity OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 3 }
-- snmpTrapDestTable
snmpTrapDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTrapDestEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 4 }
snmpTrapDestEntry OBJECT-TYPE
SYNTAX SnmpTrapDestEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in snmpTrapDestTable."
INDEX { snmpTrapDestIP }
::= { snmpTrapDestTable 1 }
SnmpTrapDestEntry ::=
SEQUENCE {
snmpTrapDestIP IpAddress,
snmpTrapDestRowStatus RowStatus,
snmpTrapDestPort INTEGER,
snmpTrapVersion INTEGER,
snmpTrapUserName DisplayString
}
snmpTrapDestIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IP address of trap destination."
::= { snmpTrapDestEntry 1 }
snmpTrapDestRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapDestEntry 2 }
snmpTrapDestPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS mandatory
DESCRIPTION
"The UDP port of the trap destination."
::= { snmpTrapDestEntry 3 }
snmpTrapVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(0),
v2c(1),
v3(2)
}
MAX-ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SNMP protocol version to send traps."
::= { snmpTrapDestEntry 4 }
snmpTrapUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user name for sending SNMPv3 traps."
::= { snmpTrapDestEntry 5 }
-- snmpTrapGroupTable
snmpTrapGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTrapGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 5 }
snmpTrapGroupEntry OBJECT-TYPE
SYNTAX SnmpTrapGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in snmpTrapGroupTable."
INDEX { snmpTrapDestIP }
::= { snmpTrapGroupTable 1 }
SnmpTrapGroupEntry ::=
SEQUENCE {
snmpTrapSystemGroup BITS,
snmpTrapInterfaceGroup BITS,
snmpTrapAAAGroup BITS,
snmpTrapSwitchGroup BITS,
snmpTrapVdslGroup BITS
}
snmpTrapSystemGroup OBJECT-TYPE
SYNTAX BITS {
coldStart(0),
warmStart(1),
fanSpeed(2),
temperature(3),
voltage(4),
reset (5),
-- timeSync (6),
externalalarm(7),
-- instrusionlock (8),
loopguard (9),
lpr (10)
-- fanSpeed(2),
-- temperature(3),
-- voltage(4),
-- bps (5),
-- reset (6),
-- timeSync (7),
-- intrusionlock(8),
-- externalalarm(9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapGroupEntry 1 }
snmpTrapInterfaceGroup OBJECT-TYPE
SYNTAX BITS {
linkup(0),
linkdown(1),
autonegotiation(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapGroupEntry 2 }
snmpTrapAAAGroup OBJECT-TYPE
SYNTAX BITS {
authentication(0),
accounting(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapGroupEntry 3 }
snmpTrapSwitchGroup OBJECT-TYPE
SYNTAX BITS {
stp(0),
mactable(1),
rmon(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapGroupEntry 5 }
snmpTrapVdslGroup OBJECT-TYPE
SYNTAX BITS {
alarmprofile(0),
others(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapGroupEntry 6 }
--snmpVersion
snmpVersion OBJECT-TYPE
SYNTAX INTEGER {
v2c(0),
v3(1),
v3v2c(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SNMP version to be used. v3v2c means that the manager
can get/set by SNMPv3 and can get by SNMPv2c."
::= { snmpSetup 6 }
-- snmpUserTable
snmpUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains SNMPv3 user information."
::= { snmpSetup 7 }
snmpUserEntry OBJECT-TYPE
SYNTAX SnmpUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of snmpUserTable."
INDEX { snmpUserName }
::= { snmpUserTable 1 }
SnmpUserEntry ::=
SEQUENCE {
snmpUserName DisplayString,
snmpUserSecurityLevel INTEGER,
snmpUserAuthProtocol INTEGER,
snmpUserPrivProtocol INTEGER
}
snmpUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user name."
::= { snmpUserEntry 1 }
snmpUserSecurityLevel OBJECT-TYPE
SYNTAX INTEGER {
noAuthNoPriv(0),
authNoPriv(1),
authPriv(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The level of security at which SNMP messages can be sent or
with which operations are being processed."
::= { snmpUserEntry 2 }
snmpUserAuthProtocol OBJECT-TYPE
SYNTAX INTEGER {
md5(0),
sha(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of authentication protocol to be used."
::= { snmpUserEntry 3 }
snmpUserPrivProtocol OBJECT-TYPE
SYNTAX INTEGER {
des(0),
aes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of privacy protocol to be used."
::= { snmpUserEntry 4 }
-- snmpTrapDestInfoTable
snmpTrapDestInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTrapDestInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 8 }
snmpTrapDestInfoEntry OBJECT-TYPE
SYNTAX SnmpTrapDestInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in snmpTrapDestInfoTable."
INDEX { snmpTrapDestInfoIpAddrType, snmpTrapDestInfoIpAddr }
::= { snmpTrapDestInfoTable 1 }
SnmpTrapDestInfoEntry ::=
SEQUENCE {
snmpTrapDestInfoIpAddrType InetAddressType,
snmpTrapDestInfoIpAddr InetAddress,
snmpTrapDestInfoRowStatus RowStatus,
snmpTrapDestInfoPort INTEGER,
snmpTrapDestInfoVersion INTEGER,
snmpTrapDestInfoUserName DisplayString
}
snmpTrapDestInfoIpAddrType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IP address of trap destination."
::= { snmpTrapDestInfoEntry 1 }
snmpTrapDestInfoIpAddr OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IP address of trap destination."
::= { snmpTrapDestInfoEntry 2 }
snmpTrapDestInfoRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapDestInfoEntry 3 }
snmpTrapDestInfoPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS mandatory
DESCRIPTION
"The UDP port of the trap destination."
::= { snmpTrapDestInfoEntry 4 }
snmpTrapDestInfoVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(0),
v2c(1),
v3(2)
}
MAX-ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SNMP protocol version to send traps."
::= { snmpTrapDestInfoEntry 5 }
snmpTrapDestInfoUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user name for sending SNMPv3 traps."
::= { snmpTrapDestInfoEntry 6 }
-- snmpTrapGroupInfoTable
snmpTrapGroupInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTrapGroupInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 9 }
snmpTrapGroupInfoEntry OBJECT-TYPE
SYNTAX SnmpTrapGroupInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in snmpTrapGroupInfoTable."
INDEX { snmpTrapDestInfoIpAddrType, snmpTrapDestInfoIpAddr }
::= { snmpTrapGroupInfoTable 1 }
SnmpTrapGroupInfoEntry ::=
SEQUENCE {
snmpTrapSystemGroup BITS,
snmpTrapInterfaceGroup BITS,
snmpTrapAAAGroup BITS,
snmpTrapSwitchGroup BITS,
snmpTrapVdslGroup BITS
}
snmpTrapSystemGroup OBJECT-TYPE
SYNTAX BITS {
coldStart(0),
warmStart(1),
fanSpeed(2),
temperature(3),
voltage(4),
reset (5),
-- timeSync (6),
externalalarm(7),
-- instrusionlock (8),
loopguard (9),
lpr (10)
-- fanSpeed(2),
-- temperature(3),
-- voltage(4),
-- bps (5),
-- reset (6),
-- timeSync (7),
-- intrusionlock(8),
-- externalalarm(9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapGroupInfoEntry 1 }
snmpTrapInterfaceGroup OBJECT-TYPE
SYNTAX BITS {
linkup(0),
linkdown(1),
autonegotiation(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapGroupInfoEntry 2 }
snmpTrapAAAGroup OBJECT-TYPE
SYNTAX BITS {
authentication(0),
accounting(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapGroupInfoEntry 3 }
snmpTrapSwitchGroup OBJECT-TYPE
SYNTAX BITS {
stp(0),
mactable(1),
rmon(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapGroupInfoEntry 5 }
snmpTrapVdslGroup OBJECT-TYPE
SYNTAX BITS {
alarmprofile(0),
others(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapGroupInfoEntry 6 }
-- dateTimeServerSetup
dateTimeServerSetup OBJECT IDENTIFIER ::= { ves1616pe54 11 }
dateTimeServerType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
daytime(2),
time(3),
ntp(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time service protocol."
::= { dateTimeServerSetup 1 }
dateTimeServerIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of time server, IPv4 only."
::= { dateTimeServerSetup 2 }
dateTimeZone OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time difference between UTC. Ex: +01"
::= { dateTimeServerSetup 3 }
dateTimeNewDateYear OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new date in year."
::= { dateTimeServerSetup 4 }
dateTimeNewDateMonth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new date in month."
::= { dateTimeServerSetup 5 }
dateTimeNewDateDay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new date in day."
::= { dateTimeServerSetup 6 }
dateTimeNewTimeHour OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new time in hour."
::= { dateTimeServerSetup 7 }
dateTimeNewTimeMinute OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new time in minute."
::= { dateTimeServerSetup 8 }
dateTimeNewTimeSecond OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new time in second."
::= { dateTimeServerSetup 9 }
-- dateTimeDaylightSavingTimeSetup OBJECT-TYPE
dateTimeDaylightSavingTimeSetup OBJECT IDENTIFIER ::= { dateTimeServerSetup 10 }
daylightSavingTimeState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Daylight saving time service enabled/disabled for the switch."
::= { dateTimeDaylightSavingTimeSetup 1 }
daylightSavingTimeStartDateWeek OBJECT-TYPE
SYNTAX INTEGER {
first(1),
second(2),
third(3),
fourth(4),
last(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Daylight saving time service start week."
::= { dateTimeDaylightSavingTimeSetup 2 }
daylightSavingTimeStartDateDay OBJECT-TYPE
SYNTAX INTEGER {
sunday(0),
monday(1),
tuesday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Daylight saving time service start day."
::= { dateTimeDaylightSavingTimeSetup 3 }
daylightSavingTimeStartDateMonth OBJECT-TYPE
SYNTAX INTEGER {
january(1),
february(2),
march(3),
april(4),
may(5),
june(6),
july(7),
august(8),
september(9),
october(10),
november(11),
december(12)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Daylight saving time service start month."
::= { dateTimeDaylightSavingTimeSetup 4 }
daylightSavingTimeStartDateHour OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Daylight saving time service start time."
::= { dateTimeDaylightSavingTimeSetup 5 }
daylightSavingTimeEndDateWeek OBJECT-TYPE
SYNTAX INTEGER {
first(1),
second(2),
third(3),
fourth(4),
last(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Daylight saving time service end week."
::= { dateTimeDaylightSavingTimeSetup 6 }
daylightSavingTimeEndDateDay OBJECT-TYPE
SYNTAX INTEGER {
sunday(0),
monday(1),
tuesday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Daylight saving time service end day."
::= { dateTimeDaylightSavingTimeSetup 7 }
daylightSavingTimeEndDateMonth OBJECT-TYPE
SYNTAX INTEGER {
january(1),
february(2),
march(3),
april(4),
may(5),
june(6),
july(7),
august(8),
september(9),
october(10),
november(11),
december(12)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Daylight saving time service end month."
::= { dateTimeDaylightSavingTimeSetup 8 }
daylightSavingTimeEndDateHour OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Daylight saving time service end time."
::= { dateTimeDaylightSavingTimeSetup 9 }
dateTimeServerIPAddrType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The address type of dateTimeServerIPAddr."
::= { dateTimeServerSetup 11 }
dateTimeServerIPAddr OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of time server."
::= { dateTimeServerSetup 12 }
-- sysMgmt
sysMgmt OBJECT IDENTIFIER ::= { ves1616pe54 12 }
sysMgmtConfigSave OBJECT-TYPE
SYNTAX INTEGER {
config_1(1),
config_2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file.
If not, running-config will be written to the booting one."
::= { sysMgmt 1 }
sysMgmtBootupConfig OBJECT-TYPE
SYNTAX INTEGER {
config_1(1),
config_2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The setting value (read index) will be written into non-volatile memory.
While rebooting, the variable write index is equal to read index initially.
You can change the value of write index by CLI / MIB."
::= { sysMgmt 2 }
sysMgmtReboot OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
reboot(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reboot switch from SNMP. 1:Reboot, 0:Nothing"
::= { sysMgmt 3 }
sysMgmtDefaultConfig OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
reset_to_default(1),
reset_to_default_keep_ip(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Erase running config and reset to default."
::= { sysMgmt 4 }
sysMgmtLastActionStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display status of last mgmt action."
::= { sysMgmt 5 }
sysMgmtSystemStatus OBJECT-TYPE
SYNTAX BITS {
sysAlarmDetected(0),
sysTemperatureError(1),
sysFanRPMError(2),
sysVoltageRangeError(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the status of the system.
The sysMgmtAlarmStatus is a bit map represented
a sum, therefore, it can represent multiple defects
simultaneously. The sysNoDefect should be set if and only if
no other flag is set.
The various bit positions are:
0 sysAlarmDetected
1 sysTemperatureError
2 sysFanRPMError
3 sysVoltageRangeError"
::= { sysMgmt 6 }
sysMgmtCPUUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Show device CPU load in %, it's the snapshot of CPU load when
getting the values."
::= { sysMgmt 7 }
sysMgmtBootupImage OBJECT-TYPE
SYNTAX INTEGER {
image_1(1),
image_2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The setting value (read index) will be written into non-volatile memory.
When rebooting, the selected image will be used.
You can change the value of write index by CLI / MIB."
::= { sysMgmt 8 }
sysMgmtCounterReset OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset all port counters."
::= { sysMgmt 9 }
-- Tftp service
sysMgmtTftpServiceSetup OBJECT IDENTIFIER ::= { sysMgmt 10 }
sysMgmtTftpServerIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" IP address of TFTP server"
::= { sysMgmtTftpServiceSetup 1 }
sysMgmtTftpRemoteFileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file name that you want to backup to or restore from TFTP server"
::= { sysMgmtTftpServiceSetup 2 }
sysMgmtTftpConfigIndex OBJECT-TYPE
SYNTAX INTEGER {
config1(1),
config2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Index of system configuration which you want to restore."
::= { sysMgmtTftpServiceSetup 3 }
sysMgmtTftpAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
backup_config(1),
restore_config(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Action of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server."
::= { sysMgmtTftpServiceSetup 4 }
sysMgmtTftpActionStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2),
under-action(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display status of mgmt action."
::= { sysMgmtTftpServiceSetup 5 }
sysMgmtTftpActionErrorInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display error information of mgmt action."
::= { sysMgmtTftpServiceSetup 6 }
sysMgmtTftpServerAddressType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The address type of the sysMgmtTftpServerAddress entry."
::= { sysMgmtTftpServiceSetup 7 }
sysMgmtTftpServerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPv4/IPv6 address of TFTP server"
::= { sysMgmtTftpServiceSetup 8 }
-- Remote FW upgrade
sysMgmtRmtFwUpgradeSetup OBJECT IDENTIFIER ::= { sysMgmt 11 }
sysMgmtRmtFwUpgradeOp OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
upgrade(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify remote FW upgrade operation"
::= { sysMgmtRmtFwUpgradeSetup 1 }
sysMgmtRmtFwUpgradeTarget OBJECT-TYPE
SYNTAX PortList
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify remote FW upgrade target CPEs"
::= { sysMgmtRmtFwUpgradeSetup 2 }
-- sysMgmtRmtFwUpgradeStatus
sysMgmtRmtFwUpgradeStatus OBJECT IDENTIFIER ::= { sysMgmtRmtFwUpgradeSetup 3 }
-- rmtFwUpgradeStatusTable
rmtFwUpgradeStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmtFwUpgradeStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysMgmtRmtFwUpgradeStatus 1 }
rmtFwUpgradeStatusEntry OBJECT-TYPE
SYNTAX RmtFwUpgradeStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in rmtFwUpgradeStatusTable."
INDEX { dot1dBasePort }
::= { rmtFwUpgradeStatusTable 1 }
RmtFwUpgradeStatusEntry ::=
SEQUENCE {
rmtFwUpgradeStatus INTEGER
}
rmtFwUpgradeStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
upgrading(2),
success(3),
fail(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { rmtFwUpgradeStatusEntry 1 }
-- sysMgmtRmtFwStatus
sysMgmtRmtFwScheduleUpgrade OBJECT IDENTIFIER ::= { sysMgmtRmtFwUpgradeSetup 4 }
sysMgmtRmtFwModel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"FW model for upgrade periodically"
::= { sysMgmtRmtFwScheduleUpgrade 1 }
sysMgmtRmtFwVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"FW version for upgrade periodically"
::= { sysMgmtRmtFwScheduleUpgrade 2 }
-- rmtFwStatusTable
rmtFwStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmtFwStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysMgmtRmtFwScheduleUpgrade 3 }
rmtFwStatusEntry OBJECT-TYPE
SYNTAX RmtFwStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in rmtFwStatusTable."
INDEX { dot1dBasePort }
::= { rmtFwStatusTable 1 }
RmtFwStatusEntry ::=
SEQUENCE {
rmtFwStatus DisplayString
}
rmtFwStatus OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { rmtFwStatusEntry 1 }
sysMgmtPacketBufferUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Show device packet buffer usage in %, it's the snapshot of packet buffer usage ratio when
getting the values."
::= { sysMgmt 12 }
sysMgmtMemoryUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Show device memory usage in %, it's the snapshot of the device memory usage ratio when
getting the values."
::= { sysMgmt 13 }
--------------
-- sysLoginSetup
sysLoginSetup OBJECT IDENTIFIER ::= { sysMgmt 14 }
loginLimitMaxNumberOfUser OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sysLoginSetup 1 }
sysLoginSetupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysLoginSetupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLoginSetup 2 }
sysLoginSetupEntry OBJECT-TYPE
SYNTAX SysLoginSetupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in LoginLimitMaxNumberOfUser."
INDEX { sysLoginName }
::= { sysLoginSetupTable 1 }
SysLoginSetupEntry ::=
SEQUENCE {
sysLoginName DisplayString,
sysLoginPassword DisplayString,
sysLoginPrivilege INTEGER,
sysLoginRowStatus RowStatus
}
sysLoginName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sysLoginSetupEntry 1 }
sysLoginPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sysLoginSetupEntry 2 }
sysLoginPrivilege OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sysLoginSetupEntry 3 }
sysLoginRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { sysLoginSetupEntry 4 }
-- ExternalAlarmSetup
sysMgmtExternalAlarmSetup OBJECT IDENTIFIER ::= { sysMgmt 15 }
sysMgmtExternalAlarm1 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
" externalalarm1 name setting"
::= { sysMgmtExternalAlarmSetup 1 }
sysMgmtExternalAlarm2 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
" externalalarm2 name setting"
::= { sysMgmtExternalAlarmSetup 2 }
sysMgmtExternalAlarm3 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
" externalalarm3 name setting"
::= { sysMgmtExternalAlarmSetup 3 }
sysMgmtExternalAlarm4 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
" externalalarm4 name setting"
::= { sysMgmtExternalAlarmSetup 4 }
sysMgmtExternalAlarmCurrentStatus OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
" externalalarm current status. The first to fourth bit represent externalalarm1 to 4 current status."
::= { sysMgmtExternalAlarmSetup 5 }
sysMgmtMacFlush OBJECT-TYPE
SYNTAX INTEGER {
mac_flush(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Set 1 to execute mac flush operation, read value will always return 0"
::= { sysMgmt 16 }
sysMgmtCPUUsageThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Set CPU Threshold value"
::= { sysMgmt 17 }
sysMgmtPacketBufferThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Set packet buffer usage Threshold value"
::= { sysMgmt 18 }
sysMgmtMemoryUsageThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Set memory usage Threshold value"
::= { sysMgmt 19 }
sysMgmtPlusVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Get Hardware Plus Version"
::= { sysMgmt 20 }
------------------------
-- layer2Setup
layer2Setup OBJECT IDENTIFIER ::= { ves1616pe54 13 }
vlanTypeSetup OBJECT-TYPE
SYNTAX INTEGER {
dot1Q(1),
port_based(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 1 }
igmpSnoopingStateSetup OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enable_igmp_snooping(2),
enable_igmp_proxying(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 2 }
tagVlanPortIsolationState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This item always returns 0. Set 1(port isolation) or 2 (all-connected) to this item to quickly setup port-based VLAN members. "
::= { layer2Setup 3 }
stpState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 4 }
igmpFilteringStateSetup OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 5 }
unknownMulticastFrameForwarding OBJECT-TYPE
SYNTAX INTEGER {
flooding(1),
drop(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 6 }
multicastGrpHostTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify host timeout for all multicast groups when the specific port is in auto mode."
::= { layer2Setup 7 }
multicastGrpLeaveTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify leave timeout for all multicast groups."
::= { layer2Setup 8 }
reservedMulticastFrameForwarding OBJECT-TYPE
SYNTAX INTEGER {
flooding(1),
drop(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 9 }
igmpsnp8021pPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the 802.1p priority of control messages for igmp-snooping(0~8, 8-No Change)"
::= { layer2Setup 10 }
portBasedVlanPortIsolationState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This item always returns 0. Set 1(port isolation) or 2 (all-connected) to this item to quickly setup port-based VLAN members. "
::= { layer2Setup 11 }
igmpsnpVlanMode OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
fixed(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 12 }
stpMode OBJECT-TYPE
SYNTAX INTEGER {
rstp(1),
mrstp(2),
mstp (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 13 }
mgmdMLDsupport OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable MLD / Disable MLD"
::= { layer2Setup 17 }
-- igmpsnpVlanTable
igmpsnpVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpsnpVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 14 }
igmpsnpVlanEntry OBJECT-TYPE
SYNTAX IgmpsnpVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in IgmpsnpVlanTable."
INDEX { igmpsnpVid }
::= { igmpsnpVlanTable 1 }
IgmpsnpVlanEntry ::=
SEQUENCE {
igmpsnpVid INTEGER,
igmpsnpVlanName DisplayString,
igmpsnpVlanRowStatus RowStatus
}
igmpsnpVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpsnpVlanEntry 1 }
igmpsnpVlanName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { igmpsnpVlanEntry 2 }
igmpsnpVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { igmpsnpVlanEntry 3 }
-- ipSetup
ipSetup OBJECT IDENTIFIER ::= { ves1616pe54 14 }
dnsIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { ipSetup 1 }
defaultMgmt OBJECT-TYPE
SYNTAX INTEGER {
in_band(0),
out_of_band(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { ipSetup 2 }
inbandIpSetup OBJECT IDENTIFIER ::= { ipSetup 3 }
inbandIpType OBJECT-TYPE
SYNTAX INTEGER {
dhcp_client(0),
static_ip(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpSetup 1 }
inbandVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpSetup 2 }
inbandStaticIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpSetup 3 }
inbandStaticSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpSetup 4 }
inbandStaticGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpSetup 5 }
outOfBandIpSetup OBJECT IDENTIFIER ::= { ipSetup 4 }
outOfBandIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { outOfBandIpSetup 1 }
outOfBandSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { outOfBandIpSetup 2 }
outOfBandGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { outOfBandIpSetup 3 }
maxNumOfInbandIp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { ipSetup 5 }
-- inbandIpTable
inbandIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF InbandIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { ipSetup 6 }
inbandIpEntry OBJECT-TYPE
SYNTAX InbandIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in inbandIpTable."
INDEX { inbandEntryIp, inbandEntryVid }
::= { inbandIpTable 1 }
InbandIpEntry ::=
SEQUENCE {
inbandEntryIp IpAddress,
inbandEntrySubnetMask IpAddress,
inbandEntryGateway IpAddress,
inbandEntryVid INTEGER,
inbandEntryManageable EnabledStatus,
inbandEntryRowStatus RowStatus
}
inbandEntryIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 1 }
inbandEntrySubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 2 }
inbandEntryGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 3 }
inbandEntryVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 4 }
inbandEntryManageable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 5 }
inbandEntryRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 6 }
-- filterSetup
filterSetup OBJECT IDENTIFIER ::= { ves1616pe54 15 }
-- filterTable
filterTable OBJECT-TYPE
SYNTAX SEQUENCE OF FilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { filterSetup 1 }
filterEntry OBJECT-TYPE
SYNTAX FilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in filterTable."
INDEX { filterMacAddr, filterVid }
::= { filterTable 1 }
FilterEntry ::=
SEQUENCE {
filterName DisplayString,
filterActionState INTEGER,
filterMacAddr MacAddress,
filterVid INTEGER,
filterRowStatus RowStatus
}
filterName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { filterEntry 1 }
filterActionState OBJECT-TYPE
SYNTAX INTEGER {
discard_source(1),
discard_destination(2),
both(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { filterEntry 2 }
filterMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { filterEntry 3 }
filterVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { filterEntry 4 }
filterRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { filterEntry 5 }
-- mirrorSetup
mirrorSetup OBJECT IDENTIFIER ::= { ves1616pe54 16 }
-- mirrorState
mirrorState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mirrorSetup 1 }
mirrorMonitorPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mirrorSetup 2 }
mirrorRspanVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mirrorSetup 7 }
-- mirrorTable
mirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF MirrorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { mirrorSetup 3 }
mirrorEntry OBJECT-TYPE
SYNTAX MirrorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mirrorTable."
INDEX { dot1dBasePort }
::= { mirrorTable 1 }
MirrorEntry ::=
SEQUENCE {
mirrorMirroredState EnabledStatus,
mirrorDirection INTEGER
}
mirrorMirroredState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mirrorEntry 1 }
mirrorDirection OBJECT-TYPE
SYNTAX INTEGER {
ingress(0),
egress(1),
both(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mirrorEntry 2 }
-- aggrSetup
aggrSetup OBJECT IDENTIFIER ::= { ves1616pe54 17 }
aggrState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrSetup 1 }
aggrSystemPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrSetup 2 }
-- aggrGroupTable
aggrGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AggrGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { aggrSetup 3 }
aggrGroupEntry OBJECT-TYPE
SYNTAX AggrGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in aggrGroupTable."
INDEX { aggrGroupIndex }
::= { aggrGroupTable 1 }
AggrGroupEntry ::=
SEQUENCE {
aggrGroupIndex INTEGER,
aggrGroupState EnabledStatus,
aggrGroupDynamicState EnabledStatus
}
aggrGroupIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { aggrGroupEntry 1 }
aggrGroupState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrGroupEntry 2 }
aggrGroupDynamicState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrGroupEntry 3 }
-- aggrPortTable
aggrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AggrPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { aggrSetup 4 }
aggrPortEntry OBJECT-TYPE
SYNTAX AggrPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in aggrPortTable."
INDEX { dot1dBasePort }
::= { aggrPortTable 1 }
AggrPortEntry ::=
SEQUENCE {
aggrPortGroup INTEGER,
aggrPortDynamicStateTimeout INTEGER
}
aggrPortGroup OBJECT-TYPE
SYNTAX INTEGER {
none(0),
t1(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrPortEntry 1 }
aggrPortDynamicStateTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrPortEntry 2 }
-- accessCtlSetup
accessCtlSetup OBJECT IDENTIFIER ::= { ves1616pe54 18 }
-- accessCtlTable
accessCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccessCtlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { accessCtlSetup 1 }
accessCtlEntry OBJECT-TYPE
SYNTAX AccessCtlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in accessCtlTable."
INDEX { accessCtlService }
::= { accessCtlTable 1 }
AccessCtlEntry ::=
SEQUENCE {
accessCtlService INTEGER,
accessCtlEnable EnabledStatus,
accessCtlServicePort INTEGER,
accessCtlTimeout INTEGER
}
accessCtlService OBJECT-TYPE
SYNTAX INTEGER {
telnet(1),
ssh(2),
ftp(3),
http(4),
https(5),
icmp(6),
snmp(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { accessCtlEntry 1 }
accessCtlEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { accessCtlEntry 2 }
accessCtlServicePort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { accessCtlEntry 3 }
accessCtlTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { accessCtlEntry 4 }
-- securedClientTable
securedClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF SecuredClientEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { accessCtlSetup 2 }
securedClientEntry OBJECT-TYPE
SYNTAX SecuredClientEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in securedClientTable."
INDEX { securedClientIndex }
::= { securedClientTable 1 }
SecuredClientEntry ::=
SEQUENCE {
securedClientIndex INTEGER,
securedClientEnable EnabledStatus,
securedClientStartIp IpAddress,
securedClientEndIp IpAddress,
securedClientService BITS,
securedClientIpAddrType InetAddressType,
securedClientStartIpAddr InetAddress,
securedClientEndIpAddr InetAddress
}
securedClientIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 1 }
securedClientEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 2 }
securedClientStartIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPv4 only"
::= { securedClientEntry 3 }
securedClientEndIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPv4 only"
::= { securedClientEntry 4 }
securedClientService OBJECT-TYPE
SYNTAX BITS {
telnet(0),
ftp(1),
http(2),
icmp(3),
snmp(4),
ssh(5),
https(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 5 }
securedClientIpAddrType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 6 }
securedClientStartIpAddr OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 7 }
securedClientEndIpAddr OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 8 }
-- queuingMethodSetup
queuingMethodSetup OBJECT IDENTIFIER ::= { ves1616pe54 19 }
queuingMethodType OBJECT-TYPE
SYNTAX INTEGER {
strictly_priority(0),
weighted_fair_scheduling(1),
weighted_round_robin(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { queuingMethodSetup 1 }
-- portQueuingMethodTable
portQueuingMethodTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortQueuingMethodEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { queuingMethodSetup 2 }
portQueuingMethodEntry OBJECT-TYPE
SYNTAX PortQueuingMethodEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portQueuingMethodTable."
INDEX { dot1dBasePort, portQueuingMethodQueue }
::= {portQueuingMethodTable 1}
PortQueuingMethodEntry ::=
SEQUENCE {
portQueuingMethodQueue INTEGER,
portQueuingMethodWeight INTEGER
}
portQueuingMethodQueue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"0...7"
::= { portQueuingMethodEntry 1 }
portQueuingMethodWeight OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0...15"
::= { portQueuingMethodEntry 2 }
-- queuingMethodFeSpq
queuingMethodFeSpq OBJECT-TYPE
SYNTAX INTEGER {
none(0),
q0(1),
q1(2),
q2(3),
q3(4),
q4(5),
q5(6),
q6(7),
q7(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VDSL port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ."
::= { queuingMethodSetup 3 }
-- portQueuingMethodGeSpqTable
portQueuingMethodGeSpqTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortQueuingMethodGeSpqEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { queuingMethodSetup 4 }
portQueuingMethodGeSpqEntry OBJECT-TYPE
SYNTAX PortQueuingMethodGeSpqEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portQueuingMethodGeSpqTable."
INDEX { dot1dBasePort }
::= {portQueuingMethodGeSpqTable 1}
PortQueuingMethodGeSpqEntry ::=
SEQUENCE {
portQueuingMethodGeSpq INTEGER
}
portQueuingMethodGeSpq OBJECT-TYPE
SYNTAX INTEGER {
none(0),
q0(1),
q1(2),
q2(3),
q3(4),
q4(5),
q5(6),
q6(7),
q7(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"GE port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ."
::= { portQueuingMethodGeSpqEntry 1 }
-- dhcpSetup
dhcpSetup OBJECT IDENTIFIER ::= { ves1616pe54 20 }
globalDhcpRelay OBJECT IDENTIFIER ::= { dhcpSetup 1 }
globalDhcpRelayEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { globalDhcpRelay 1 }
globalDhcpRelayOption82Enable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { globalDhcpRelay 2 }
globalDhcpRelayInfoEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { globalDhcpRelay 3 }
globalDhcpRelayInfoData OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { globalDhcpRelay 4 }
-- globalDhcpRelayRemoteServer
maxNumberOfGlobalDhcpRelayRemoteServer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { globalDhcpRelay 5 }
-- globalDhcpRelayRemoteServerTable
globalDhcpRelayRemoteServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalDhcpRelayRemoteServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { globalDhcpRelay 6 }
globalDhcpRelayRemoteServerEntry OBJECT-TYPE
SYNTAX GlobalDhcpRelayRemoteServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in globalDhcpRelayRemoteServerTable."
INDEX { globalDhcpRelayRemoteServerIp }
::= { globalDhcpRelayRemoteServerTable 1 }
GlobalDhcpRelayRemoteServerEntry ::=
SEQUENCE {
globalDhcpRelayRemoteServerIp IpAddress,
globalDhcpRelayRemoteServerRowStatus RowStatus
}
globalDhcpRelayRemoteServerIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { globalDhcpRelayRemoteServerEntry 1 }
globalDhcpRelayRemoteServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { globalDhcpRelayRemoteServerEntry 2 }
--- dhcp option82 remote id field
globalDhcpRelayRemoteIDEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { globalDhcpRelay 7 }
globalDhcpRelayRemoteIDData OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { globalDhcpRelay 8 }
--
dhcpRelay OBJECT IDENTIFIER ::= { dhcpSetup 3 }
maxNumberOfDhcpRelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of DHCP relay entries that can be created.
A value of 0 for this object implies that there exists settings for
global DHCP relay."
::= { dhcpRelay 1 }
maxNumberOfDhcpRelayRemoteServer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelay 2 }
-- dhcpRelayTable
dhcpRelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpRelayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelay 3 }
dhcpRelayEntry OBJECT-TYPE
SYNTAX DhcpRelayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in dhcpRelayTable."
INDEX { dhcpRelayVid }
::= { dhcpRelayTable 1 }
DhcpRelayEntry ::=
SEQUENCE {
dhcpRelayOption82Enable EnabledStatus,
dhcpRelayInfoEnable EnabledStatus,
dhcpRelayInfoData DisplayString,
dhcpRelayRemoteIDEnable EnabledStatus,
dhcpRelayRemoteIDData DisplayString
}
dhcpRelayOption82Enable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelayEntry 1 }
dhcpRelayInfoEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelayEntry 2 }
dhcpRelayInfoData OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelayEntry 3 }
--- dhcp option82 remote id field
dhcpRelayRemoteIDEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelayEntry 4 }
dhcpRelayRemoteIDData OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelayEntry 5 }
-- dhcpRelayRemoteServerTable
dhcpRelayRemoteServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpRelayRemoteServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelay 4 }
dhcpRelayRemoteServerEntry OBJECT-TYPE
SYNTAX DhcpRelayRemoteServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in dhcpRelayRemoteServerTable."
INDEX { dhcpRelayVid, dhcpRelayRemoteServerIp }
::= { dhcpRelayRemoteServerTable 1 }
DhcpRelayRemoteServerEntry ::=
SEQUENCE {
dhcpRelayVid INTEGER,
dhcpRelayRemoteServerIp IpAddress,
dhcpRelayRemoteServerRowStatus RowStatus
}
dhcpRelayVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelayRemoteServerEntry 1 }
dhcpRelayRemoteServerIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelayRemoteServerEntry 2 }
dhcpRelayRemoteServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelayRemoteServerEntry 3 }
-- staticRouteSetup
staticRouteSetup OBJECT IDENTIFIER ::= { ves1616pe54 21 }
maxNumberOfStaticRoutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { staticRouteSetup 1 }
-- staticRouteTable
staticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { staticRouteSetup 2 }
staticRouteEntry OBJECT-TYPE
SYNTAX StaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in staticRouteTable."
INDEX { staticRouteIp, staticRouteMask }
::= { staticRouteTable 1 }
StaticRouteEntry ::=
SEQUENCE {
staticRouteName DisplayString,
staticRouteIp IpAddress,
staticRouteMask IpAddress,
staticRouteGateway IpAddress,
staticRouteMetric INTEGER,
staticRouteRowStatus RowStatus
}
staticRouteName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 1 }
staticRouteIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 2 }
staticRouteMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 3 }
staticRouteGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 4 }
staticRouteMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 5 }
staticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 6 }
-- arpInfo
arpInfo OBJECT IDENTIFIER ::= { ves1616pe54 22 }
-- arpTable
arpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { arpInfo 1 }
arpEntry OBJECT-TYPE
SYNTAX ArpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in arpTable."
INDEX { arpIpAddr, arpMacVid }
::= { arpTable 1 }
ArpEntry ::=
SEQUENCE {
arpIndex INTEGER,
arpIpAddr IpAddress,
arpMacAddr MacAddress,
arpMacVid INTEGER,
arpType INTEGER
}
arpIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpEntry 1 }
arpIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpEntry 2 }
arpMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpEntry 3 }
arpMacVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpEntry 4 }
arpType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"1-static, 2-dynamic"
::= { arpEntry 5 }
-- portOpModeSetup
portOpModeSetup OBJECT IDENTIFIER ::= { ves1616pe54 24 }
-- portOpModePortTable
portOpModePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortOpModePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { portOpModeSetup 1 }
portOpModePortEntry OBJECT-TYPE
SYNTAX PortOpModePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portOpModePortTable."
INDEX { dot1dBasePort }
::= { portOpModePortTable 1 }
PortOpModePortEntry ::=
SEQUENCE {
portOpModePortSpeedDuplex INTEGER,
portOpModePortFlowCntl INTEGER,
portOpModePortName OCTET STRING,
portOpModePortModuleType INTEGER,
portOpModePortLinkUpType INTEGER,
portOpModePortIntrusionLock EnabledStatus,
portOpModePortLBTestSetup INTEGER,
portOpModePortLBTestStatus INTEGER,
portOpModePortSwCounterReset INTEGER,
portOpModePortVdslCounterReset INTEGER,
portOpModePortVdslStatus INTEGER,
portOpModePortVdslUptime OCTET STRING
}
portOpModePortSpeedDuplex OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
speed_10_half(1),
speed_10_full(2),
speed_100_half(3),
speed_100_full(4),
speed_1000_full(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 1 }
portOpModePortFlowCntl OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 2 }
portOpModePortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..9))
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 3 }
portOpModePortModuleType OBJECT-TYPE
SYNTAX INTEGER {
fast_ethernet_10_100(0),
gigabit_ethernet_100_1000(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 4 }
portOpModePortLinkUpType OBJECT-TYPE
SYNTAX INTEGER {
down(0),
copper(1),
fiber(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 5 }
portOpModePortIntrusionLock OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 6 }
portOpModePortLBTestSetup OBJECT-TYPE
SYNTAX INTEGER {
internal_loopback_test(1),
external_loopback_test(2),
vtur_to_vtuo_loopback(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This entry display latest loopback test status of port while performing loopback test."
::= { portOpModePortEntry 7 }
portOpModePortLBTestStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
under_testing(1),
success(2),
fail(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This entry display latest loopback test status of port while performing loopback test."
::= { portOpModePortEntry 8 }
portOpModePortSwCounterReset OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This entry resets port SW counter."
::= { portOpModePortEntry 9 }
portOpModePortVdslCounterReset OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This entry resets port VDSL counter."
::= { portOpModePortEntry 10 }
portOpModePortVdslStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
standby(2),
showtime(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This entry reports VDSL link current status."
::= { portOpModePortEntry 11 }
portOpModePortVdslUptime OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This entry reports VDSL link current link up time."
::= { portOpModePortEntry 12 }
-- portOpModePortLBTable
portOpModePortLBTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortOpModePortLBEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { portOpModeSetup 2 }
portOpModePortLBEntry OBJECT-TYPE
SYNTAX PortOpModePortLBEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portOpModePortLBTable."
INDEX { dot1dBasePort }
::= { portOpModePortLBTable 1 }
PortOpModePortLBEntry ::=
SEQUENCE {
portOpModePortLBActive INTEGER,
portOpModePortLBNumber INTEGER,
portOpModePortLBCount INTEGER,
portOpModePortLBPktSize INTEGER
}
portOpModePortLBActive OBJECT-TYPE
SYNTAX INTEGER {
active(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortLBEntry 1 }
portOpModePortLBNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortLBEntry 2 }
portOpModePortLBCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortLBEntry 3 }
portOpModePortLBPktSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Packet size range from 64 bytes to 1518 bytes"
::= { portOpModePortLBEntry 4 }
-- portOpModePortLBResultTable
portOpModePortLBResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortOpModePortLBResultEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { portOpModeSetup 3 }
portOpModePortLBResultEntry OBJECT-TYPE
SYNTAX PortOpModePortLBResultEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portOpModePortLBResultTable."
INDEX { dot1dBasePort }
::= { portOpModePortLBResultTable 1 }
PortOpModePortLBResultEntry ::=
SEQUENCE {
portOpModePortLBMaxRTT INTEGER,
portOpModePortLBMinRTT INTEGER,
portOpModePortLBAvgRTT INTEGER,
portOpModePortLBPktLossRate INTEGER,
portOpModePortLBStatus INTEGER
}
portOpModePortLBMaxRTT OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortLBResultEntry 1 }
portOpModePortLBMinRTT OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortLBResultEntry 2 }
portOpModePortLBAvgRTT OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortLBResultEntry 3 }
portOpModePortLBPktLossRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Loopback Packet loss rate"
::= { portOpModePortLBResultEntry 4 }
portOpModePortLBStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
in_progress(1),
complete(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortLBResultEntry 5 }
-- portBasedVlanSetup
portBasedVlanSetup OBJECT IDENTIFIER ::= { ves1616pe54 25 }
-- portBasedVlanPortListTable
portBasedVlanPortListTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortBasedVlanPortListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { portBasedVlanSetup 1 }
portBasedVlanPortListEntry OBJECT-TYPE
SYNTAX PortBasedVlanPortListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portBasedVlanPortListTable."
INDEX { dot1dBasePort }
::= { portBasedVlanPortListTable 1 }
PortBasedVlanPortListEntry ::=
SEQUENCE {
portBasedVlanPortListMembers OCTET STRING
}
portBasedVlanPortListMembers OBJECT-TYPE
SYNTAX PortList
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portBasedVlanPortListEntry 1 }
--fault MIB
faultMIB MODULE-IDENTITY
LAST-UPDATED "200411031200Z" -- YYYY/MM/DD, HH/MM
ORGANIZATION "ZyXEL"
CONTACT-INFO ""
DESCRIPTION
"Fault event table definitions"
::= { ves1616pe54 26 }
-- **************************************************************************
-- Local Textual Conventions
-- **************************************************************************
UtcTimeStamp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Universal Time Coordinated as a 32-bit value that designates
the number of seconds since Jan 1, 1970 12:00AM."
SYNTAX Unsigned32
EventIdNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention describes the index that uniquely
identifies a fault event type in the entire system. Every fault
event type, e.g. link down, has a unique EventIdNumber."
SYNTAX Integer32
EventSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention describes the severity of a fault event.
The decreasing order of severity is shown in the textual
convention."
SYNTAX INTEGER{
critical (1),
major (2),
minor (3),
informational (4)
}
EventServiceAffective ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention indicates whether an event is immediately
service affecting or not."
SYNTAX INTEGER{
noServiceAffected (1),
serviceAffected (2)
}
InstanceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention describes the type of an instanceId
associated with each event and by that means specifies how
the instanceId variable should be intepreted.
Various instanceId types are specified below to enable fault
monitoring for different kind of devices from fixed
configuration pizza boxes to multi chassis nodes. All
instanceId types may not need to be used in every device
type.
Note also that instanceId semantics are element type dependent
(e.g. different kind of interface naming conventions may be used)
and thus instanceId usage may vary from element to element.
=========================================================================
Type Description Example form
of InstanceId
=========================================================================
unknown (1) unknown type - Irrelevant-
-------------------------------------------------------------------------
node (2) Associated with events originating from 1
the node. Used for general events that (Node number)
can not be associated with any specific
block. InstanceId value 1 is used for
single node equipment.
-------------------------------------------------------------------------
shelf (3) Associated with events originating from 1
the shelf. In the case of fixed (shelf number)
configuration devices this type is used
for events that are associated with the
physical enclosure, e.g. faults related
to fan etc. InstanceId value 1 is used
for single self equipment.
-------------------------------------------------------------------------
line (4) Associated with events originating from
physical interfaces or associated
components such as line cards.
InstanceId usage examples for faults
originating from:
- Physical port: Simply port number, e.g. .......1
-------------------------------------------------------------------------
switch (5) Associated with events originating from 1
from a switch chip or a switch card. (switch number)
For single switch equipment InstanceId
value 1 is used, for multi swich nodes
InstanceId semantics if for further
study.
-------------------------------------------------------------------------
lsp (6) Associated with events originating from 1
a particular lsp. (lsp index)
NOTE: In this case the InstanceName
contains the lsp name and InstanceId
contains lsp index.
-------------------------------------------------------------------------
l2Interface(7) Associated with events originating from - TBD -
a particular layer 2 interface. Used for
layer 2 related events such as L2 control
protocol faults. InstanceId semantics is
for further study.
-------------------------------------------------------------------------
l3Interface(8) Associated with events originating from - TBD -
a particular layer 3 interface. Used for
layer 3 related events such as L3 control
protocol faults. InstanceId semantics is
for further study.
-------------------------------------------------------------------------
rowIndex (9) Associated with events reporting about a
'logical' or conceptual table that consists
of rows. The Instance Id is the index/key
for a row in the table. The format of the
Instance Id will simply be a series of decimal
numbers seperated by a '.':
========================================================================="
SYNTAX INTEGER {
unknown (1),
node (2),
shelf (3),
line (4),
switch (5),
lsp (6),
l2Interface(7),
l3Interface(8),
rowIndex(9)
}
-- *****************************************************************************
-- Top level structure of this MIB.
-- *****************************************************************************
eventObjects OBJECT IDENTIFIER ::= { faultMIB 1 }
-- *****************************************************************************
-- Event Table
--
-- Event table reports all currently active fault events. Only normal type of
-- faults (i.e. faults that are not automatically and immediately cleared) are
-- present in the event table. Delta faults (i.e. faults that are automatically
-- cleared) are reported only by using trap messages.
-- *****************************************************************************
eventTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of currently active fault events. All faults
of normal type regardless of their severity level
are recorded in the event table. When a normal
type fault is cleared it is deleted from the event
table."
::= { eventObjects 1 }
eventEntry OBJECT-TYPE
SYNTAX EventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about an
event in the event table."
INDEX { eventSeqNum }
::= { eventTable 1 }
EventEntry ::=
SEQUENCE {
eventSeqNum Integer32,
eventEventId EventIdNumber,
eventName DisplayString,
eventInstanceType InstanceType,
eventInstanceId DisplayString,
eventInstanceName DisplayString,
eventSeverity EventSeverity,
eventSetTime UtcTimeStamp,
eventDescription DisplayString,
eventServAffective EventServiceAffective,
eventInstanceIdNumber Integer32
}
eventSeqNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the sequence number of an event.
Sequence number is incremented monotonically starting
from 0 until it reaches its maximum and wraps around back
to 0.
Sequence number is incremented when
- the state of a normal type fault is set on (the same sequence
number is present in the events table as well as in the trap
that is sent to notify about the fault on event)
- delta event occurs (sequence number present in trap message)
- the state of a normal type fault is set off (sequence number
present in trap that is sent to notify for clearing)."
::= { eventEntry 1 }
eventEventId OBJECT-TYPE
SYNTAX EventIdNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the event ID which uniquely
identifies the event in the entire system."
::= { eventEntry 2 }
eventName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the name of the event, for
example 'Ethernet Link Down'"
::= { eventEntry 3 }
eventInstanceType OBJECT-TYPE
SYNTAX InstanceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the type of InstanceId of a
particular event in the event table. In brief
the instanceType refers to the type of sub-component
generating this event in the system, for example
switch (5). For more details see the textual
conventions section.
AFFECTS: eventInstanceId,
eventInstanceName"
::= { eventEntry 4 }
eventInstanceId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more details see
the textual conventions section.
DEPENDS ON: eventInstanceType"
::= { eventEntry 5 }
eventInstanceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is mainly used to store additional information
about the sub-component that is generating an event. For
example this field may specify what cooling fan is faulty.
DEPENDS ON: eventInstanceType"
::= { eventEntry 6 }
eventSeverity OBJECT-TYPE
SYNTAX EventSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable dictates the urgency of action when a event
occurs. There are four severity levels - Critical, Major,
Minor, and Informational. Critical events are those, which
require immediate operator intervention to prevent/reduce
system down time. Major events require quick attention and
Minor events possibly require some attention. Informational
events indicate the occurrence of events that may need to be
investigated."
::= { eventEntry 7 }
eventSetTime OBJECT-TYPE
SYNTAX UtcTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This table contains only normal events and this variable
represents the time when the event become active, i.e. the
number of seconds since Jan 1, 1970 12:00AM."
::= { eventEntry 8 }
eventDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable contains a description of the event and reasons
behind the event. This is a free format alpha-numeric string
that is set by the entity generating this event. This variable
may be empty if there is no usefull information to report.
The maximum length of this string is 255 characters."
::= { eventEntry 9 }
eventServAffective OBJECT-TYPE
SYNTAX EventServiceAffective
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates whether the event is service affective or not"
::= { eventEntry 10 }
eventInstanceIdNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more details see
the textual conventions section.
DEPENDS ON: eventInstanceType"
::= { eventEntry 11 }
-- fault Trap MIB
faultTrapsMIB MODULE-IDENTITY
LAST-UPDATED "200411011200Z" -- YYYY/MM/DD, HH/MM
ORGANIZATION "ZyXEL"
CONTACT-INFO ""
DESCRIPTION
"Fault event trap definitions"
::= { ves1616pe54 27 }
trapInfoObjects OBJECT IDENTIFIER ::= { faultTrapsMIB 1}
trapNotifications OBJECT IDENTIFIER ::= { faultTrapsMIB 2}
-- **************************************************************************
-- Local Textual Conventions
-- **************************************************************************
EventPersistence ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention indicates whether the event is delta
(automatically and immediately cleared) or normal (not
automatically cleared)."
SYNTAX INTEGER{
normal (1),
delta (2)
}
-- **************************************************************************
-- Trap information object definitions
-- **************************************************************************
trapRefSeqNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the former sequence number of a cleared event
in the event table. Not intended to read but only used in
trap notifications."
::= { trapInfoObjects 1 }
trapPersistence OBJECT-TYPE
SYNTAX EventPersistence
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the event is delta (automatically and
immediately cleared) or normal (not automatically cleared).
Not intended to read but only used in trap notifications."
::= { trapInfoObjects 2 }
trapSenderNodeId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the node ID of the sending network element. If not
supported should be set to 0. Not intended to read but only
used in trap notifications."
::= { trapInfoObjects 3 }
trapSenderStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the trap status. 0 means cleared, 1 means happened."
::= { trapInfoObjects 4 }
-- ***************************************************************************
-- Trap definitions
-- ***************************************************************************
eventOnTrap NOTIFICATION-TYPE
OBJECTS {
eventSeqNum,
eventEventId,
eventName,
eventSetTime,
eventSeverity,
eventInstanceType,
eventInstanceId,
eventInstanceName,
eventServAffective,
eventDescription,
eventInstanceIdNumber,
trapPersistence,
trapSenderNodeId,
trapSenderStatus,
sysObjectID}
STATUS current
DESCRIPTION
"This trap is used to inform network management system that a delta
fault event (events that are automatically cleared) has occured
or a normal fault event (not automatically cleared) state has
been set on.
Objects are used as follows:
- eventSeqNum is the sequence number of the event. For normal
type of events must equal to the sequence number of the event
in the events table.
- eventEventId specifies what fault event has occured.
- eventName specifies the name of the fault event.
- eventSetTime indicates when fault event has occured
(delta events) or when fault has been set on (normal events).
- eventSeverity reports the severity level of the event.
- eventInstanceType indicates what kind of object is faulty.
- eventInstanceId specifies what instance is faulty.
- eventInstanceName may contain textual description for
the faulty object.
- eventServAffective specifies whether the event is
immediately service affcetive.
- eventDescription reports possible additional information about the event.
- trapPersistence tells whether this event is a delta or normal event.
- trapSenderNodeId specifies the node ID of the sending network element if
configuring it is supported for the network element, otherwise 0.
- trapSenderStatus specifes the trap status.
- sysObjectID specifies what kind of equipment reports the fault event.
For more information see the eventTable specification"
::= { trapNotifications 1 }
eventClearedTrap NOTIFICATION-TYPE
OBJECTS {
eventSeqNum,
eventEventId,
eventSetTime,
eventInstanceType,
eventInstanceId,
eventInstanceIdNumber,
trapRefSeqNum,
trapSenderNodeId,
trapSenderStatus,
sysObjectID}
STATUS current
DESCRIPTION
"This trap is used to inform network management system that a normal
type fault event has been cleared (state set off).
Objects are used as follows:
- eventSeqNum is the sequence number of the this clearing event. Note that
the sequence number of the cleared event is reported in the trapRefSeqNum
object.
- eventEventId specifies what event has been cleared.
- eventSetTime indicates when fault event has been cleared.
- eventInstanceType indicates what kind of object has been
faulty.
- eventInstanceId specifies what instance has been faulty.
- trapRefSeqNum specifies the sequence number of the cleared event (i.e.
the sequence number was assigned for the event in the events table).
- trapSenderNodeId specifies the node ID of the sending network element if
configuring it is supported for the network element, otherwise 0.
- sysObjectID specifies what kind of equipment reports the clearing event.
For more information see the eventTable specification"
::= { trapNotifications 2 }
-- multicastPortSetup
multicastPortSetup OBJECT IDENTIFIER ::= { ves1616pe54 28 }
multicastPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastPortSetup 1 }
multicastPortEntry OBJECT-TYPE
SYNTAX MulticastPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in multicastPortTable."
INDEX { dot1dBasePort }
::= { multicastPortTable 1 }
MulticastPortEntry ::=
SEQUENCE {
multicastPortImmediateLeave EnabledStatus,
multicastPortMaxGroupLimited EnabledStatus,
multicastPortMaxOfGroup INTEGER,
multicastPortIgmpFilteringProfile DisplayString,
multicastPortQueryMode INTEGER,
igmpMsgMaxLimited EnabledStatus,
igmpMsgLimit INTEGER
}
multicastPortImmediateLeave OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { multicastPortEntry 1 }
multicastPortMaxGroupLimited OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { multicastPortEntry 2 }
multicastPortMaxOfGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0..255"
::= { multicastPortEntry 3 }
multicastPortIgmpFilteringProfile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { multicastPortEntry 4 }
multicastPortQueryMode OBJECT-TYPE
SYNTAX INTEGER {
auto_mode(1),
fix_mode(2),
edge_mode(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify query mode for each port"
::= { multicastPortEntry 5 }
igmpMsgMaxLimited OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { multicastPortEntry 6 }
igmpMsgLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0..255"
::= { multicastPortEntry 7 }
-- multicastStatus
multicastStatus OBJECT IDENTIFIER ::= { ves1616pe54 29 }
multicastStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 1 }
multicastStatusEntry OBJECT-TYPE
SYNTAX MulticastStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in multicastStatusTable."
INDEX { multicastStatusVlanID, multicastStatusPort, multicastStatusGroup }
::= { multicastStatusTable 1 }
MulticastStatusEntry ::=
SEQUENCE {
multicastStatusIndex INTEGER,
multicastStatusVlanID INTEGER,
multicastStatusPort INTEGER,
multicastStatusGroup IpAddress,
multicastStatusJoinCounter INTEGER,
multicastStatusLeaveCounter INTEGER
}
multicastStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastStatusEntry 1 }
multicastStatusVlanID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastStatusEntry 2 }
multicastStatusPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastStatusEntry 3 }
multicastStatusGroup OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastStatusEntry 4 }
multicastStatusJoinCounter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastStatusEntry 5 }
multicastStatusLeaveCounter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastStatusEntry 6 }
igmpCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpCountEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A count table of igmp query/report/leave message."
::= { multicastStatus 2 }
-- igmpCountStatus
igmpCountEntry OBJECT-TYPE
SYNTAX IgmpCountEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in igmpCountTable."
INDEX { igmpCountIndex }
::= { igmpCountTable 1 }
IgmpCountEntry ::=
SEQUENCE {
igmpCountIndex INTEGER,
igmpCountInQuery INTEGER,
igmpCountInReport INTEGER,
igmpCountInLeave INTEGER,
igmpCountInQueryDrop INTEGER,
igmpCountInReportDrop INTEGER,
igmpCountInLeaveDrop INTEGER,
igmpCountOutQuery INTEGER,
igmpCountOutReport INTEGER,
igmpCountOutLeave INTEGER
}
igmpCountIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of IgmpCountEntry. 0 means total count in whole system"
::= { igmpCountEntry 1 }
igmpCountInQuery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 2 }
igmpCountInReport OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 3 }
igmpCountInLeave OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 4 }
igmpCountInQueryDrop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 5 }
igmpCountInReportDrop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 6 }
igmpCountInLeaveDrop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 7 }
igmpCountOutQuery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 8 }
igmpCountOutReport OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 9 }
igmpCountOutLeave OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 10 }
multicastVlanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastVlanStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 3 }
-- multicastVlanStatusTable
multicastVlanStatusEntry OBJECT-TYPE
SYNTAX MulticastVlanStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in multicastVlanStatusTable."
INDEX { multicastVlanStatusVlanID }
::= { multicastVlanStatusTable 1 }
MulticastVlanStatusEntry ::=
SEQUENCE {
multicastVlanStatusVlanID INTEGER,
multicastVlanStatusType INTEGER,
multicastVlanQueryPort PortList,
multicastVlanQuerySrcIp IpAddress
}
multicastVlanStatusVlanID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastVlanStatusEntry 1 }
multicastVlanStatusType OBJECT-TYPE
SYNTAX INTEGER {
dynamic(1),
mvr (2),
static(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastVlanStatusEntry 2 }
multicastVlanQueryPort OBJECT-TYPE
SYNTAX PortList
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastVlanStatusEntry 3 }
multicastVlanQuerySrcIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastVlanStatusEntry 4 }
-- igmpCounterPortTable
igmpCounterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpCounterPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 4 }
igmpCounterPortEntry OBJECT-TYPE
SYNTAX IgmpCounterPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in igmpCounterPortTable."
INDEX { dot1dBasePort }
::= { igmpCounterPortTable 1 }
IgmpCounterPortEntry ::=
SEQUENCE {
igmpCounterPortJoin Counter32,
igmpCounterPortLeave Counter32,
igmpCounterPortActiveGroup INTEGER,
igmpCounterPortQuery Counter32
}
igmpCounterPortJoin OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Join counter for the port."
::= { igmpCounterPortEntry 1 }
igmpCounterPortLeave OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Leave counter for the port."
::= { igmpCounterPortEntry 2 }
igmpCounterPortActiveGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current active group for the port"
::= { igmpCounterPortEntry 3 }
igmpCounterPortQuery OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Query counter for the port."
::= { igmpCounterPortEntry 4 }
------------------------------------------
-- igmp counters for specific vid
-- igmpCounterVlanTable
igmpCounterVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpCounterVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 5 }
igmpCounterVlanEntry OBJECT-TYPE
SYNTAX IgmpCounterVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in igmpCounterVlanTable."
INDEX { dot1qVlanIndex }
::= { igmpCounterVlanTable 1 }
IgmpCounterVlanEntry ::=
SEQUENCE {
igmpCounterVlanJoin Counter32,
igmpCounterVlanLeave Counter32,
igmpCounterVlanActiveGroup INTEGER,
igmpCounterVlanQuery Counter32
}
igmpCounterVlanJoin OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Join counter for the Vlan."
::= { igmpCounterVlanEntry 1 }
igmpCounterVlanLeave OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Leave counter for the Vlan."
::= { igmpCounterVlanEntry 2 }
igmpCounterVlanActiveGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current active group for the Vlan"
::= { igmpCounterVlanEntry 3 }
igmpCounterVlanQuery OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Query counter for the Vlan."
::= { igmpCounterVlanEntry 4 }
multicastCurrentGroupStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastCurrentGroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 6 }
multicastCurrentGroupStatusEntry OBJECT-TYPE
SYNTAX MulticastCurrentGroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in multicastCurrentGroupStatusTable."
INDEX { multicastStatusVlanID, multicastStatusGroup }
::= { multicastCurrentGroupStatusTable 1 }
MulticastCurrentGroupStatusEntry ::=
SEQUENCE {
multicastCurrentNumberOfActivePort INTEGER
}
multicastCurrentNumberOfActivePort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current number Of active port."
::= { multicastCurrentGroupStatusEntry 1 }
-- multicastClientSrcIp
multicastClientSrcIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastClientSrcIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 7 }
multicastClientSrcIpEntry OBJECT-TYPE
SYNTAX MulticastClientSrcIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in multicastClientSrcIpTable."
INDEX { multicastStatusVlanID, multicastStatusPort, multicastStatusGroup, multicastClientSrcIpIndex }
::= { multicastClientSrcIpTable 1 }
MulticastClientSrcIpEntry ::=
SEQUENCE {
multicastClientSrcIpIndex INTEGER,
multicastClientSrcIpAddress IpAddress
}
multicastClientSrcIpIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastClientSrcIpEntry 1 }
multicastClientSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastClientSrcIpEntry 2 }
-- mgmdStatusTable
mgmdStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MGMDStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 8 }
mgmdStatusEntry OBJECT-TYPE
SYNTAX MGMDStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mgmdStatusTable."
INDEX { mgmdStatusVlanID, mgmdStatusPort, mgmdStatusGroupAddressType, mgmdStatusGroupAddress }
::= { mgmdStatusTable 1 }
MGMDStatusEntry ::=
SEQUENCE {
mgmdStatusIndex INTEGER,
mgmdStatusVlanID INTEGER,
mgmdStatusPort INTEGER,
mgmdStatusGroupAddressType InetAddressType,
mgmdStatusGroupAddress InetAddress ,
mgmdStatusGroupFilterMode INTEGER
}
mgmdStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdStatusEntry 1 }
mgmdStatusVlanID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdStatusEntry 2 }
mgmdStatusPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdStatusEntry 3 }
mgmdStatusGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address type of the mgmdStatusGroupAddress entry."
::= { mgmdStatusEntry 4 }
mgmdStatusGroupAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdStatusEntry 5 }
mgmdStatusGroupFilterMode OBJECT-TYPE
SYNTAX INTEGER {include (1),exclude (2) }
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current cache state, applicable to MGMDv3-compatible
nodes. The value indicates whether the state is INCLUDE or
EXCLUDE."
::= { mgmdStatusEntry 6 }
-- mgmdCountTable
mgmdCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF MGMDCountEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A count table of igmp/MLD query/report/leave message."
::= { multicastStatus 9 }
mgmdCountEntry OBJECT-TYPE
SYNTAX MGMDCountEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mgmdCountTable."
INDEX { mgmdCountIndex }
::= { mgmdCountTable 1 }
MGMDCountEntry ::=
SEQUENCE {
mgmdCountIndex INTEGER,
mgmdCountInQuery INTEGER,
mgmdCountInReport INTEGER,
mgmdCountInLeave INTEGER,
mgmdCountInQueryDrop INTEGER,
mgmdCountInReportDrop INTEGER,
mgmdCountInLeaveDrop INTEGER,
mgmdCountOutQuery INTEGER,
mgmdCountOutReport INTEGER,
mgmdCountOutLeave INTEGER
}
mgmdCountIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of mgmdCountEntry. 0 means total count in whole system"
::= { mgmdCountEntry 1 }
mgmdCountInQuery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdCountEntry 2 }
mgmdCountInReport OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdCountEntry 3 }
mgmdCountInLeave OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdCountEntry 4 }
mgmdCountInQueryDrop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdCountEntry 5 }
mgmdCountInReportDrop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdCountEntry 6 }
mgmdCountInLeaveDrop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdCountEntry 7 }
mgmdCountOutQuery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdCountEntry 8 }
mgmdCountOutReport OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdCountEntry 9 }
mgmdCountOutLeave OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdCountEntry 10 }
-- mgmdVlanStatusTable
mgmdVlanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MGMDVlanStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 10 }
mgmdVlanStatusEntry OBJECT-TYPE
SYNTAX MGMDVlanStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mgmdVlanStatusTable."
INDEX { mgmdVlanStatusVlanID }
::= { mgmdVlanStatusTable 1 }
MGMDVlanStatusEntry ::=
SEQUENCE {
mgmdVlanStatusVlanID INTEGER,
mgmdVlanStatusType INTEGER,
mgmdVlanQueryPort PortList,
mgmdVlanQuerySrcIpType InetAddressType,
mgmdVlanQuerySrcIp InetAddress
}
mgmdVlanStatusVlanID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdVlanStatusEntry 1 }
mgmdVlanStatusType OBJECT-TYPE
SYNTAX INTEGER {
dynamic(1),
mvr (2),
static(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdVlanStatusEntry 2 }
mgmdVlanQueryPort OBJECT-TYPE
SYNTAX PortList
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdVlanStatusEntry 3 }
mgmdVlanQuerySrcIpType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address type of the mgmdVlanQuerySrcIp entry."
::= { mgmdVlanStatusEntry 4 }
mgmdVlanQuerySrcIp OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdVlanStatusEntry 5 }
-- mgmdCounterPortTable
mgmdCounterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MGMDCounterPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 11 }
mgmdCounterPortEntry OBJECT-TYPE
SYNTAX MGMDCounterPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mgmdCounterPortTable."
INDEX { dot1dBasePort }
::= { mgmdCounterPortTable 1 }
MGMDCounterPortEntry ::=
SEQUENCE {
mgmdCounterPortReport Counter32,
mgmdCounterPortLeave Counter32,
mgmdCounterPortActiveGroup INTEGER,
mgmdCounterPortQuery Counter32
}
mgmdCounterPortReport OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Report counter for the port."
::= { mgmdCounterPortEntry 1 }
mgmdCounterPortLeave OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Leave counter for the port."
::= { mgmdCounterPortEntry 2 }
mgmdCounterPortActiveGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current active group for the port"
::= { mgmdCounterPortEntry 3 }
mgmdCounterPortQuery OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Query counter for the port."
::= { mgmdCounterPortEntry 4 }
------------------------------------------
-- mgmd counters for specific vid
-- mgmdCounterVlanTable
mgmdCounterVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MGMDCounterVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 12 }
mgmdCounterVlanEntry OBJECT-TYPE
SYNTAX MGMDCounterVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mgmdCounterVlanTable."
INDEX { dot1qVlanIndex }
::= { mgmdCounterVlanTable 1 }
MGMDCounterVlanEntry ::=
SEQUENCE {
mgmdCounterVlanReport Counter32,
mgmdCounterVlanLeave Counter32,
mgmdCounterVlanActiveGroup INTEGER,
mgmdCounterVlanQuery Counter32
}
mgmdCounterVlanReport OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Report counter for the Vlan."
::= { mgmdCounterVlanEntry 1 }
mgmdCounterVlanLeave OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Leave counter for the Vlan."
::= { mgmdCounterVlanEntry 2 }
mgmdCounterVlanActiveGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current active group for the Vlan"
::= { mgmdCounterVlanEntry 3 }
mgmdCounterVlanQuery OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Query counter for the Vlan."
::= { mgmdCounterVlanEntry 4 }
-- mgmdCurrentGroupStatusTable
mgmdCurrentGroupStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MGMDCurrentGroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 13 }
mgmdCurrentGroupStatusEntry OBJECT-TYPE
SYNTAX MGMDCurrentGroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mgmdCurrentGroupStatusTable."
INDEX { mgmdStatusVlanID, mgmdStatusGroupAddressType, mgmdStatusGroupAddress }
::= { mgmdCurrentGroupStatusTable 1 }
MGMDCurrentGroupStatusEntry ::=
SEQUENCE {
mgmdCurrentNumberOfActivePort INTEGER
}
mgmdCurrentNumberOfActivePort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current number Of active port."
::= { mgmdCurrentGroupStatusEntry 1 }
-- mgmdClientSrcIp
mgmdClientSrcIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MGMDClientSrcIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 14 }
mgmdClientSrcIpEntry OBJECT-TYPE
SYNTAX MGMDClientSrcIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mgmdClientSrcIpTable."
INDEX {mgmdClientSrcIpAddressType,mgmdClientSrcIpIndex, mgmdStatusVlanID, mgmdStatusPort, mgmdStatusGroupAddress}
::= { mgmdClientSrcIpTable 1 }
MGMDClientSrcIpEntry ::=
SEQUENCE {
mgmdClientSrcIpIndex INTEGER,
mgmdClientSrcIpAddressType InetAddressType,
mgmdClientSrcIpAddress InetAddress
}
mgmdClientSrcIpIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdClientSrcIpEntry 1 }
mgmdClientSrcIpAddressType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdClientSrcIpEntry 2 }
mgmdClientSrcIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdClientSrcIpEntry 3 }
-- mgmdSrcListTable
mgmdSrcListTable OBJECT-TYPE
SYNTAX SEQUENCE OF MGMDSrcListEntry
MAX-ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the Source List entries
corresponding to each interface and multicast group pair
on a host."
::= { multicastStatus 15 }
mgmdSrcListEntry OBJECT-TYPE
SYNTAX MGMDSrcListEntry
MAX-ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the mgmdSrcListTable."
INDEX { mgmdSrcListAddressType, mgmdStatusVlanID, mgmdStatusPort, mgmdStatusGroupAddress, mgmdSrcListAddress }
::= { mgmdSrcListTable 1 }
MGMDSrcListEntry ::= SEQUENCE {
mgmdSrcListAddressType InetAddressType,
mgmdSrcListAddress InetAddress
-- mgmdSrcListExpire TimeTicks
}
mgmdSrcListAddressType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The address type of the InetAddress variables in this
table. This value applies to the mgmdStatusGroupAddress
and mgmdSrcListAddress entries."
::= { mgmdSrcListEntry 1 }
mgmdSrcListAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The IP multicast group address for which this entry
contains information."
::= { mgmdSrcListEntry 2 }
-- mgmdSrcListExpire OBJECT-TYPE
-- SYNTAX TimeTicks
-- MAX-ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "This value indicates the relevance of the SrcList entry,
-- whereby a non-zero value indicates this is an INCLUDE state
-- value, and a zero value indicates this to be an EXCLUDE
-- state value."
-- ::= { mgmdHostSrcListEntry 3 }
------------------------------------------
-- igmpFilteringProfileSetup
igmpFilteringProfileSetup OBJECT IDENTIFIER ::= { ves1616pe54 30 }
igmpFilteringMaxNumberOfProfile OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileSetup 1 }
igmpFilteringProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFilteringProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileSetup 2 }
igmpFilteringProfileEntry OBJECT-TYPE
SYNTAX IgmpFilteringProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in igmpFilteringProfileTable."
INDEX { igmpFilteringProfileName, igmpFilteringProfileStartAddress, igmpFilteringProfileEndAddress }
::= { igmpFilteringProfileTable 1 }
IgmpFilteringProfileEntry ::=
SEQUENCE {
igmpFilteringProfileName DisplayString,
igmpFilteringProfileStartAddress IpAddress,
igmpFilteringProfileEndAddress IpAddress,
igmpFilteringProfileRowStatus RowStatus
}
igmpFilteringProfileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileEntry 1 }
igmpFilteringProfileStartAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileEntry 2 }
igmpFilteringProfileEndAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileEntry 3 }
igmpFilteringProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileEntry 4 }
mgmdFilterProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF MgmdFilterProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileSetup 3 }
mgmdFilterProfileEntry OBJECT-TYPE
SYNTAX MgmdFilterProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mgmdFilterProfileTable.For v4 and v6 address"
INDEX {
mgmdFilterProfileName,
mgmdFilterProfileAddressType,
mgmdFilterProfileStartAddress,
mgmdFilterProfileEndAddress }
::= { mgmdFilterProfileTable 1 }
MgmdFilterProfileEntry ::=
SEQUENCE {
mgmdFilterProfileName DisplayString,
mgmdFilterProfileAddressType InetAddressType,
mgmdFilterProfileStartAddress InetAddress,
mgmdFilterProfileEndAddress InetAddress,
mgmdFilterProfileRowStatus RowStatus
}
mgmdFilterProfileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mgmdFilterProfileEntry 1 }
mgmdFilterProfileAddressType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the mgmdFilterProfileStartAddress and mgmdFilterProfileEndAddress address, as defined
in the InetAddress MIB."
::= { mgmdFilterProfileEntry 2 }
mgmdFilterProfileStartAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Start IP address of this profile."
::= { mgmdFilterProfileEntry 3 }
mgmdFilterProfileEndAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The End IP address of this profile."
::= { mgmdFilterProfileEntry 4 }
mgmdFilterProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { mgmdFilterProfileEntry 5 }
-- MVRSetup
mvrSetup OBJECT IDENTIFIER ::= { ves1616pe54 31 }
maxNumberOfMVR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 1 }
mvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 2 }
mvrEntry OBJECT-TYPE
SYNTAX MvrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mvrTable."
INDEX { mvrVlanID }
::= { mvrTable 1 }
MvrEntry ::=
SEQUENCE {
mvrVlanID INTEGER,
mvrName DisplayString,
mvrMode INTEGER,
mvrRowStatus RowStatus,
mvr8021pPriority INTEGER
}
mvrVlanID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"1..4094"
::= { mvrEntry 1 }
mvrName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrEntry 2 }
mvrMode OBJECT-TYPE
SYNTAX INTEGER {
dynamic(0),
compatible(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrEntry 3 }
mvrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { mvrEntry 4 }
mvr8021pPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the 802.1p priority of control messages within MVR (0~7)"
::= { mvrEntry 5 }
mvrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 3 }
mvrPortEntry OBJECT-TYPE
SYNTAX MvrPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mvrPortTable."
INDEX { mvrVlanID, dot1dBasePort }
::= { mvrPortTable 1 }
MvrPortEntry ::=
SEQUENCE {
mvrPortRole INTEGER,
mvrPortTagging EnabledStatus
}
mvrPortRole OBJECT-TYPE
SYNTAX INTEGER {
none(1),
source_port(2),
receiver_port(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrPortEntry 1 }
mvrPortTagging OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrPortEntry 2 }
maxNumberOfMvrGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 4 }
mvrGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 5 }
mvrGroupEntry OBJECT-TYPE
SYNTAX MvrGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mvrGroupTable."
INDEX { mvrVlanID, mvrGroupName }
::= { mvrGroupTable 1 }
MvrGroupEntry ::=
SEQUENCE {
mvrGroupName DisplayString,
mvrGroupStartAddress IpAddress,
mvrGroupEndAddress IpAddress,
mvrGroupRowStatus RowStatus
}
mvrGroupName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mvrGroupEntry 1 }
mvrGroupStartAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrGroupEntry 2 }
mvrGroupEndAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrGroupEntry 3 }
mvrGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { mvrGroupEntry 4 }
mvrBehavior OBJECT-TYPE
SYNTAX INTEGER {
igmp_snooping(1),
igmp_proxy(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 6 }
mvrMgmdGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrMgmdGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 7 }
mvrMgmdGroupEntry OBJECT-TYPE
SYNTAX MvrMgmdGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mvrMgmdGroupTable."
INDEX { mvrVlanID, mvrMgmdGroupName }
::= { mvrMgmdGroupTable 1 }
MvrMgmdGroupEntry ::=
SEQUENCE {
mvrMgmdGroupName DisplayString,
mvrMgmdGroupAddressType InetAddressType,
mvrMgmdGroupStartAddress InetAddress,
mvrMgmdGroupEndAddress InetAddress,
mvrMgmdGroupRowStatus RowStatus
}
mvrMgmdGroupName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mvrMgmdGroupEntry 1 }
mvrMgmdGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrMgmdGroupEntry 2 }
mvrMgmdGroupStartAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrMgmdGroupEntry 3 }
mvrMgmdGroupEndAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrMgmdGroupEntry 4 }
mvrMgmdGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { mvrMgmdGroupEntry 5 }
-- sysLogSetup
sysLogSetup OBJECT IDENTIFIER ::= { ves1616pe54 33 }
sysLogState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"sysLog enabled/disabled for the switch."
::= { sysLogSetup 1 }
-- sysLogTypeTable
sysLogTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysLogTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogSetup 2 }
sysLogTypeEntry OBJECT-TYPE
SYNTAX SysLogTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in sysLogTypeTable."
INDEX { sysLogTypeIndex }
::= { sysLogTypeTable 1 }
SysLogTypeEntry ::=
SEQUENCE {
sysLogTypeIndex INTEGER,
sysLogTypeName DisplayString,
sysLogTypeState EnabledStatus,
sysLogTypeFacility INTEGER
}
sysLogTypeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogTypeEntry 1 }
sysLogTypeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sysLogTypeEntry 2 }
sysLogTypeState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sysLogTypeEntry 3 }
sysLogTypeFacility OBJECT-TYPE
SYNTAX INTEGER {
local_user0(0),
local_user1(1),
local_user2(2),
local_user3(3),
local_user4(4),
local_user5(5),
local_user6(6),
local_user7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sysLogTypeEntry 4 }
-- sysLogServerTable
sysLogServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysLogServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogSetup 3 }
sysLogServerEntry OBJECT-TYPE
SYNTAX SysLogServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in sysLogServerTable."
INDEX { sysLogServerAddress }
::= { sysLogServerTable 1 }
SysLogServerEntry ::=
SEQUENCE {
sysLogServerAddress IpAddress,
sysLogServerLogLevel INTEGER,
sysLogServerRowStatus RowStatus
}
sysLogServerAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogServerEntry 1 }
sysLogServerLogLevel OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level0-1(1),
level0-2(2),
level0-3(3),
level0-4(4),
level0-5(5),
level0-6(6),
level0-7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sysLogServerEntry 2 }
sysLogServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { sysLogServerEntry 3 }
-- sysLogServerInfoTable
sysLogServerInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysLogServerInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogSetup 4 }
sysLogServerInfoEntry OBJECT-TYPE
SYNTAX SysLogServerInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in sysLogServerInfoTable."
INDEX { sysLogServerInfoIpAddrType, sysLogServerInfoIpAddr }
::= { sysLogServerInfoTable 1 }
SysLogServerInfoEntry ::=
SEQUENCE {
sysLogServerInfoIpAddrType InetAddressType,
sysLogServerInfoIpAddr InetAddress,
sysLogServerInfoLogLevel INTEGER,
sysLogServerInfoRowStatus RowStatus
}
sysLogServerInfoIpAddrType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogServerInfoEntry 1 }
sysLogServerInfoIpAddr OBJECT-TYPE
SYNTAX InetAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogServerInfoEntry 2 }
sysLogServerInfoLogLevel OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level0-1(1),
level0-2(2),
level0-3(3),
level0-4(4),
level0-5(5),
level0-6(6),
level0-7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sysLogServerInfoEntry 3 }
sysLogServerInfoRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { sysLogServerInfoEntry 4 }
-- diffservSetup
diffservSetup OBJECT IDENTIFIER ::= { ves1616pe54 34 }
diffservState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { diffservSetup 1 }
-- diffservMapTable
diffservMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffservMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { diffservSetup 2 }
diffservMapEntry OBJECT-TYPE
SYNTAX DiffservMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in diffservMapTable."
INDEX { diffservMapDscp }
::= { diffservMapTable 1 }
DiffservMapEntry ::=
SEQUENCE {
diffservMapDscp INTEGER,
diffservMapPriority INTEGER
}
diffservMapDscp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"0-63"
::= { diffservMapEntry 1 }
diffservMapPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-7"
::= { diffservMapEntry 2 }
-- diffservPortTable
diffservPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffservPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { diffservSetup 3 }
diffservPortEntry OBJECT-TYPE
SYNTAX DiffservPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in diffservPortTable."
INDEX { dot1dBasePort }
::= { diffservPortTable 1 }
DiffservPortEntry ::=
SEQUENCE {
diffservPortState EnabledStatus
}
diffservPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { diffservPortEntry 1 }
-- vturSwitchSetup
vturSwitchSetup OBJECT IDENTIFIER ::= { ves1616pe54 35 }
-- vturLayer2Setup
vturLayer2Setup OBJECT IDENTIFIER ::= { vturSwitchSetup 1 }
layer2Table OBJECT-TYPE
SYNTAX SEQUENCE OF Layer2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturLayer2Setup 1 }
layer2Entry OBJECT-TYPE
SYNTAX Layer2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in layer2Table."
INDEX { dot1dBasePort}
::= { layer2Table 1 }
Layer2Entry ::=
SEQUENCE {
vturIgmpSnoopingStateSetup INTEGER
}
vturIgmpSnoopingStateSetup OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Entry 2 }
-- vturPortSetup
vturPortSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 2 }
-- PortTable
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturPortSetup 1 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portTable."
INDEX { dot1dBasePort, portNumber }
::= { portTable 1 }
PortEntry ::=
SEQUENCE {
portNumber INTEGER,
portOperStatus INTEGER,
portSpeedDuplex INTEGER,
portOperSpeed INTEGER
}
portNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display all ports we got in CPE side"
::= { portEntry 1 }
portOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CPE port's current status."
::= { portEntry 3 }
portSpeedDuplex OBJECT-TYPE
SYNTAX INTEGER {
linkdown(0),
autoneg(1),
half_10M(2),
full_10M(3),
half_100M(4),
full_100M(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify each port's speed and duplex in CPE side."
::= { portEntry 4 }
portOperSpeed OBJECT-TYPE
SYNTAX INTEGER {
linkdown(0),
autoneg(1),
half_10M(2),
full_10M(3),
half_100M(4),
full_100M(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CPE port's current speed."
::= { portEntry 8 }
-- vturWanSetup
vturWanSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 4 }
-- vturWanTable
vturWan OBJECT IDENTIFIER ::= { vturWanSetup 1 }
vturWanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturWanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturWan 1 }
vturWanEntry OBJECT-TYPE
SYNTAX VturWanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vturWanTable."
INDEX { dot1dBasePort, vturWanIndex }
::= { vturWanTable 1 }
VturWanEntry ::=
SEQUENCE {
vturWanIndex INTEGER,
vturVlanTagging INTEGER,
vturVlanID INTEGER,
vtur8021p INTEGER,
vturPPPUsername OCTET STRING,
vturPPPPassword OCTET STRING,
vturWanProtocol INTEGER,
vturWanProtocolSetting BITS,
vturWanIP IpAddress,
vturWanSubnetMask IpAddress,
vturWanService EnabledStatus,
vturWanRowStatus RowStatus
}
vturWanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display the wan index range from 1 to 4 we got in CPE side"
::= { vturWanEntry 1 }
vturVlanTagging OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
vlan_mux(2),
auto_vlan(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the vlan tagging we got in CPE side"
::= { vturWanEntry 2 }
vturVlanID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the vlan id range from 1 to 4094 we got in CPE side"
::= { vturWanEntry 3 }
vtur8021p OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the 802.1p value range from 0 to 7 we got in CPE side"
::= { vturWanEntry 4 }
vturPPPUsername OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the PPP username we got in CPE side"
::= { vturWanEntry 5 }
vturPPPPassword OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the PPP password we got in CPE side"
::= { vturWanEntry 6 }
vturWanProtocol OBJECT-TYPE
SYNTAX INTEGER
{
pppoe(1),
mer(2),
bridge(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the wan protocol info we got in CPE side"
::= { vturWanEntry 7 }
vturWanProtocolSetting OBJECT-TYPE
SYNTAX BITS
{
dhcp_client_(0),
nat(1),
firewall(2),
igmp(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the wan service enable/disable status we got in CPE side"
::= { vturWanEntry 8 }
vturWanIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Display the wan IP setting we got in CPE side"
::= { vturWanEntry 9 }
vturWanSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Display the wan subnet mask we got in CPE side"
::= { vturWanEntry 10 }
vturWanService OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the wan service enable/disable status we got in CPE side"
::= { vturWanEntry 11 }
vturWanRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { vturWanEntry 12 }
vturWanCommon OBJECT IDENTIFIER ::= { vturWanSetup 2 }
vturWanCommonTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturWanCommonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturWanCommon 1 }
vturWanCommonEntry OBJECT-TYPE
SYNTAX VturWanCommonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vturWanCommonTable."
INDEX { dot1dBasePort}
::= { vturWanCommonTable 1 }
VturWanCommonEntry ::=
SEQUENCE {
vturWanQoS EnabledStatus,
vturEnableAutoDefaultGateway EnabledStatus,
vturDefaultGatewayIP IpAddress,
vturVitualPortEnable EnabledStatus
}
vturWanQoS OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturWanCommonEntry 1 }
vturEnableAutoDefaultGateway OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the enable auto default gateay setting we get from CPE side"
::= { vturWanCommonEntry 2 }
vturDefaultGatewayIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the default gateway setting we get from CPE side"
::= { vturWanCommonEntry 3 }
vturVitualPortEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display Enable/Disable virtual port on eth1 setting we get on CPE side"
::= { vturWanCommonEntry 4 }
-- vturClassificationSetup
vturClassificationSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 5 }
-- vturClassificationTable
vturClassificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturClassificationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturClassificationSetup 1 }
vturClassificationEntry OBJECT-TYPE
SYNTAX VturClassificationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vturClassificationTable."
INDEX { dot1dBasePort, vturClassificationIndex }
::= { vturClassificationTable 1 }
VturClassificationEntry ::=
SEQUENCE {
vturClassificationIndex INTEGER,
vturClassificationRuleEnable EnabledStatus,
vturWanInterface INTEGER,
vturClassificationQueue INTEGER,
vturClassification8021p INTEGER,
vturClassificationVid INTEGER,
vturFilterPhysicalPort INTEGER,
vturFilterProtocol INTEGER,
vturFilterSourceIP IpAddress,
vturFilterSourceSubnetMask IpAddress,
vturFilterDestinationIP IpAddress,
vturFilterDestinationSubnetMask IpAddress,
vturFilterSourcePortStart INTEGER,
vturFilterSourcePortEnd INTEGER,
vturFilterDestinationPortStart INTEGER,
vturFilterDestinationPortEnd INTEGER,
vturFilterSourceMACAddr OCTET STRING,
vturFilterSourceMACMask OCTET STRING,
vturFilterDestinationMACAddr OCTET STRING,
vturFilterDestinationMACMask OCTET STRING,
vturFilter8021p INTEGER,
vturFilterProtocolType INTEGER,
vturPolicyGatewayIP IpAddress,
vturClassificationRowStatus RowStatus
}
vturClassificationIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display the classification index range from 1 to 8 we got in CPE side"
::= { vturClassificationEntry 1 }
vturClassificationRuleEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the classification enable/disable status we got in CPE side"
::= { vturClassificationEntry 2 }
vturWanInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the wan interface index range from 1 to 4 we got in CPE side"
::= { vturClassificationEntry 3 }
vturClassificationQueue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the assigned queue (1-4)802.1p value we got in CPE side"
::= { vturClassificationEntry 4 }
vturClassification8021p OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Mark 802.1p if 802.1q is enabled [0-7]"
::= { vturClassificationEntry 5 }
vturClassificationVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the 802.1Q VLAN ID: [1-4094]"
::= { vturClassificationEntry 6 }
vturFilterPhysicalPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Physical LAN Port number"
::= { vturClassificationEntry 7 }
vturFilterProtocol OBJECT-TYPE
SYNTAX INTEGER{
tcp-udp(1),
tcp(2),
udp(3),
icmp(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Protocol: [TCP/UDP, TCP, UDP, ICMP] 1-4"
::= { vturClassificationEntry 8 }
vturFilterSourceIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display the filtering source IP we got in CPE side"
::= { vturClassificationEntry 9 }
vturFilterSourceSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering source subnet mask we got in CPE side"
::= { vturClassificationEntry 10 }
vturFilterDestinationIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering destination IP we got in CPE side"
::= { vturClassificationEntry 11 }
vturFilterDestinationSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering destination subnet mask we got in CPE side"
::= { vturClassificationEntry 12 }
vturFilterSourcePortStart OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering source port start we got in CPE side"
::= { vturClassificationEntry 13 }
vturFilterSourcePortEnd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering source port end we got in CPE side"
::= { vturClassificationEntry 14 }
vturFilterDestinationPortStart OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering destination port start we got in CPE side"
::= { vturClassificationEntry 15 }
vturFilterDestinationPortEnd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering destination end port we got in CPE side"
::= { vturClassificationEntry 16 }
vturFilterSourceMACAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering source MAC addr we got in CPE side"
::= { vturClassificationEntry 17 }
vturFilterSourceMACMask OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering source MAC mask we got in CPE side"
::= { vturClassificationEntry 18 }
vturFilterDestinationMACAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering destination MAC addr we got in CPE side"
::= { vturClassificationEntry 19 }
vturFilterDestinationMACMask OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering destination MAC mask we got in CPE side"
::= { vturClassificationEntry 20 }
vturFilter8021p OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering 802.1p value we got in CPE side"
::= { vturClassificationEntry 21 }
vturFilterProtocolType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering protocol type we got in CPE side"
::= { vturClassificationEntry 22 }
vturPolicyGatewayIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Display the filtering protocol type we got in CPE side"
::= { vturClassificationEntry 23 }
vturClassificationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { vturClassificationEntry 24 }
-- vturMiscSetup
vturMiscSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 6 }
-- vturMntTable
vturMntTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturMntEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturMiscSetup 1 }
vturMntEntry OBJECT-TYPE
SYNTAX VturMntEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in VTUR Misc Table."
INDEX { dot1dBasePort }
::= { vturMntTable 1 }
VturMntEntry ::=
SEQUENCE {
mntOperation INTEGER,
mntCommit INTEGER,
mntStatus INTEGER
}
mntOperation OBJECT-TYPE
SYNTAX INTEGER {
layer2Setup(1),
portSetup(2),
priorityQueueSetup(3),
dot1qVlanSetup(4),
portBasedVlanSetup(5),
loadFactoryDefault(6),
resetSW(7),
apBasicSetup(8),
apSecuritySetup(9),
apRadiusSetup(10),
apMacFilterSetup(11),
apMacFilterAddrSetup(12),
reinit(13),
consoleSetup(14),
remoteFunctionSetup(15),
regetstatue(16),
protocolBasedVlanSetup(17),
vturWanSetup(18),
vturClassificationSetup(19),
vturLanSetup(20),
vturResetCounter(21),
loadDefaultWithoutIP(22)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify the operation of VTUR"
::= { vturMntEntry 1 }
mntCommit OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
commit(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Apply maintenance setting to vtur"
::= { vturMntEntry 2 }
mntStatus OBJECT-TYPE
SYNTAX INTEGER {
in-progress(0),
success(1),
fail(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display the current status regarding to the operation."
::= { vturMntEntry 3 }
-- vturAPSetup
vturAPSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 7 }
-- vturAPGeneral
vturAPGeneral OBJECT IDENTIFIER ::= { vturAPSetup 1 }
-- vturAPGeneralStatisticsTable
vturAPGeneralStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturAPGeneralStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturAPGeneral 1 }
vturAPGeneralStatisticsEntry OBJECT-TYPE
SYNTAX VturAPGeneralStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in VTUR AP General Statistics Table."
INDEX { dot1dBasePort }
::= { vturAPGeneralStatisticsTable 1 }
VturAPGeneralStatisticsEntry ::=
SEQUENCE {
lanRxBytes Counter32,
lanRxPkts Counter32,
lanTxBytes Counter32,
lanTxPkts Counter32,
vdslRxBytes Counter32,
vdslRxPkts Counter32,
vdslTxBytes Counter32,
vdslTxPkts Counter32,
wlanRxBytes Counter32,
wlanRxPkts Counter32,
wlanRxErrs Counter32,
wlanRxDrops Counter32,
wlanTxBytes Counter32,
wlanTxPkts Counter32,
wlanTxErrs Counter32,
wlanTxDrops Counter32
}
lanRxBytes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received bytes on LAN"
::= { vturAPGeneralStatisticsEntry 1 }
lanRxPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received frames on LAN"
::= { vturAPGeneralStatisticsEntry 2 }
lanTxBytes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted bytes on LAN"
::= { vturAPGeneralStatisticsEntry 3 }
lanTxPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted frames on LAN"
::= { vturAPGeneralStatisticsEntry 4 }
vdslRxBytes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received bytes on VDSL"
::= { vturAPGeneralStatisticsEntry 5 }
vdslRxPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received frames on VDSL"
::= { vturAPGeneralStatisticsEntry 6 }
vdslTxBytes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted bytes on VDSL"
::= { vturAPGeneralStatisticsEntry 7 }
vdslTxPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted frames on VDSL"
::= { vturAPGeneralStatisticsEntry 8 }
wlanRxBytes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received bytes on WLAN"
::= { vturAPGeneralStatisticsEntry 9 }
wlanRxPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received frames on WLAN "
::= { vturAPGeneralStatisticsEntry 10 }
wlanRxErrs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received error frames on WLAN "
::= { vturAPGeneralStatisticsEntry 11 }
wlanRxDrops OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received drop frames on WLAN "
::= { vturAPGeneralStatisticsEntry 12 }
wlanTxBytes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted bytes on WLAN "
::= { vturAPGeneralStatisticsEntry 13 }
wlanTxPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted frames on WLAN "
::= { vturAPGeneralStatisticsEntry 14 }
wlanTxErrs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted error frames on WLAN "
::= { vturAPGeneralStatisticsEntry 15 }
wlanTxDrops OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted drop frames on WLAN "
::= { vturAPGeneralStatisticsEntry 16 }
vturAPWlan OBJECT IDENTIFIER ::= { vturAPSetup 2 }
-- vturAPWlanBasicTable
vturAPWlanBasicTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturAPWlanBasicEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturAPWlan 1 }
vturAPWlanBasicEntry OBJECT-TYPE
SYNTAX VturAPWlanBasicEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in VTUR AP Wlan Basic Table."
INDEX { dot1dBasePort }
::= { vturAPWlanBasicTable 1 }
VturAPWlanBasicEntry ::=
SEQUENCE {
enable INTEGER,
ssid DisplayString,
bssid MacAddress,
hidden INTEGER,
channel INTEGER,
mode INTEGER,
txPower INTEGER,
multicastRate INTEGER
}
enable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0: disable wlan
1: enable wlan"
::= { vturAPWlanBasicEntry 1 }
ssid OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SSID of the AP"
::= { vturAPWlanBasicEntry 2 }
bssid OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Mac address of AP"
::= { vturAPWlanBasicEntry 3 }
hidden OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0: not hide AP's SSID
1: hide AP's SSID"
::= { vturAPWlanBasicEntry 4 }
channel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Channel number of the AP"
::= { vturAPWlanBasicEntry 5 }
mode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1: B or G mix mode
2: Pure G mode
3: Pure B mode"
::= { vturAPWlanBasicEntry 6 }
txPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transmit power
1: 30 mW
2: 15 mW"
::= { vturAPWlanBasicEntry 7 }
multicastRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transmit rate of multicast packets. If the value not zero, transmit rate is value * 500kbps
0: auto
2, 4, 11, 22: Transmit rate = 1, 2, 5.5, 11 Mbps when mode = pure B mode
12, 18, 24, 36, 48, 96, 108: Transmit rate = 6, 9, 12, 18, 24, 36, 48, 54 Mbps when mode = pure G mode2, 4, 11, 12, 18, 22, 24, 36, 48, 96, 108: Transmit rate = 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps when mode = B or G mix mode"
::= { vturAPWlanBasicEntry 8 }
-- vturAPWlanSecurityTable
vturAPWlanSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturAPWlanSecurityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturAPWlan 2 }
vturAPWlanSecurityEntry OBJECT-TYPE
SYNTAX VturAPWlanSecurityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in VTUR AP Wlan Security Table."
INDEX { dot1dBasePort }
::= { vturAPWlanSecurityTable 1 }
VturAPWlanSecurityEntry ::=
SEQUENCE {
securityMode INTEGER,
wepEncryp INTEGER,
keyId INTEGER,
key1 DisplayString,
key2 DisplayString,
key3 DisplayString,
key4 DisplayString,
psk DisplayString,
wpaMix INTEGER,
reAuthTime INTEGER,
idleTime INTEGER,
gtkTime INTEGER
}
securityMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1: No security
2: Static WEP
3: WPA-PSK
4: WPA
5: WPA2
6: WPA2-PSK"
::= { vturAPWlanSecurityEntry 1 }
wepEncryp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = static WEP.
1: 64-Bit
2: 128-Bit"
::= { vturAPWlanSecurityEntry 2 }
keyId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = static WEP. It indicate which key will be used for encryption.
If KeyId is equal to 1, AP will use Key1 to encrypt frame."
::= { vturAPWlanSecurityEntry 3 }
key1 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = static WEP.
If WEPEncryp is 64-Bit, key1 will be 10 heximal digits.
If WEPEncryp is 128-Bit, key1 will be 26 heximal digits."
::= { vturAPWlanSecurityEntry 4 }
key2 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = static WEP.
If WEPEncryp is 64-Bit, key2 will be 10 heximal digits.
If WEPEncryp is 128-Bit, key2 will be 26 heximal digits."
::= { vturAPWlanSecurityEntry 5 }
key3 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = static WEP.
If WEPEncryp is 64-Bit, key3 will be 10 heximal digits.
If WEPEncryp is 128-Bit, key3 will be 26 heximal digits."
::= { vturAPWlanSecurityEntry 6 }
key4 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = static WEP.
If WEPEncryp is 64-Bit, key4 will be 10 heximal digits.
If WEPEncryp is 128-Bit, key4 will be 26 heximal digits."
::= { vturAPWlanSecurityEntry 7 }
psk OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = WPA-PSK or WPA2-PSK. It means Pre-Shared Key"
::= { vturAPWlanSecurityEntry 8 }
wpaMix OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = WPA2 or WPA2-PSK.
When WPAMix is enable on WPA2, stations with WPA2-AES or WPA-TKIP could connect to AP.
When WPAMix is enable on WPA2-PSK, stations with WPA2-PSK-AES or WPA-PSK-TKIP could connect to AP.
0: disable
1: enable"
::= { vturAPWlanSecurityEntry 9 }
reAuthTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2.
AP will trigger re-authentication with station every [ReAuthTime] seconds."
::= { vturAPWlanSecurityEntry 10 }
idleTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2.
AP will flush station<6F><6E>s information if there are no packets from station for [idleTime] seconds."
::= { vturAPWlanSecurityEntry 11 }
gtkTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2.
AP will trigger the update of group key with station every [GTKTime] seconds."
::= { vturAPWlanSecurityEntry 12 }
-- vturAPWlanRadiusTable
vturAPWlanRadiusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturAPWlanRadiusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturAPWlan 3 }
vturAPWlanRadiusEntry OBJECT-TYPE
SYNTAX VturAPWlanRadiusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in VTUR AP Wlan Security Table."
INDEX { dot1dBasePort }
::= { vturAPWlanRadiusTable 1 }
VturAPWlanRadiusEntry ::=
SEQUENCE {
authServIP InetAddress,
authServPort INTEGER,
authServSecret DisplayString,
accServActive INTEGER,
accServIP InetAddress,
accServPort INTEGER,
accServSecret DisplayString
}
authServIP OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the IP address of authentication server."
::= { vturAPWlanRadiusEntry 1 }
authServPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the port number of authentication server."
::= { vturAPWlanRadiusEntry 2 }
authServSecret OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the shared secret of authentication server."
::= { vturAPWlanRadiusEntry 3 }
accServActive OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is for activating or inactivating accounting server.
0: inactivate accounting server.
1: activate accounting server"
::= { vturAPWlanRadiusEntry 4 }
accServIP OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the IP address of accounting server."
::= { vturAPWlanRadiusEntry 5 }
accServPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the port number of accounting server."
::= { vturAPWlanRadiusEntry 6 }
accServSecret OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the shared secret of accounting server."
::= { vturAPWlanRadiusEntry 7 }
vturAPWlanMacFilter OBJECT IDENTIFIER ::= { vturAPWlan 4 }
-- vturAPWlanMacFilterTable
vturAPWlanMacFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturAPWlanMacFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturAPWlanMacFilter 1 }
vturAPWlanMacFilterEntry OBJECT-TYPE
SYNTAX VturAPWlanMacFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in VTUR AP Wlan Mac Filter Table."
INDEX { dot1dBasePort }
::= { vturAPWlanMacFilterTable 1 }
VturAPWlanMacFilterEntry ::=
SEQUENCE {
macFltActive INTEGER,
macFltAction INTEGER
}
macFltActive OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Activate or inactivate wlan MAC filter.
0: Inactive
1: Active"
::= { vturAPWlanMacFilterEntry 1 }
macFltAction OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0: allow association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8.
1: deny association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8."
::= { vturAPWlanMacFilterEntry 2 }
-- vturAPWlanMacFltAddrTable
vturAPWlanMacFltAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturAPWlanMacFltAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturAPWlanMacFilter 2 }
vturAPWlanMacFltAddrEntry OBJECT-TYPE
SYNTAX VturAPWlanMacFltAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in VTUR AP Wlan Security Table."
INDEX { dot1dBasePort, fltStaIndex }
::= { vturAPWlanMacFltAddrTable 1 }
VturAPWlanMacFltAddrEntry ::=
SEQUENCE {
fltStaIndex INTEGER,
macFltAddr MacAddress
}
fltStaIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for Mac filter"
::= { vturAPWlanMacFltAddrEntry 1 }
macFltAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The address for Mac filter"
::= { vturAPWlanMacFltAddrEntry 2 }
-- vturAPWlanStatisticsTable
vturAPWlanStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturAPWlanStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturAPWlan 5 }
vturAPWlanStatisticsEntry OBJECT-TYPE
SYNTAX VturAPWlanStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in VTUR AP Wlan Security Table."
INDEX { dot1dBasePort }
::= { vturAPWlanStatisticsTable 1 }
VturAPWlanStatisticsEntry ::=
SEQUENCE {
inPkts INTEGER,
inOctets INTEGER,
inUCasts INTEGER,
inMCasts INTEGER,
rxFCSErrors INTEGER,
outPkts INTEGER,
outOctets INTEGER,
outUCasts INTEGER,
outMCasts INTEGER
}
inPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Same as WLANRxPkts in vturAPGeneral.vturAPGeneralStatistics MIB "
::= { vturAPWlanStatisticsEntry 1 }
inOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Same as WLANRxBytes in vturAPGeneral.vturAPGeneralStatistics MIB "
::= { vturAPWlanStatisticsEntry 2 }
inUCasts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received unicast frames"
::= { vturAPWlanStatisticsEntry 3 }
inMCasts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received multicast frames"
::= { vturAPWlanStatisticsEntry 4 }
rxFCSErrors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Same as WLANRxErrs in vturAPGeneral.vturAPGeneralStatistics MIB"
::= { vturAPWlanStatisticsEntry 5 }
outPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Same as WLANTxPkts in vturAPGeneral.vturAPGeneralStatistics MIB"
::= { vturAPWlanStatisticsEntry 6 }
outOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Same as WLANTxBytes in vturAPGeneral.vturAPGeneralStatistics MIB"
::= { vturAPWlanStatisticsEntry 7 }
outUCasts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted unicast frames"
::= { vturAPWlanStatisticsEntry 8 }
outMCasts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted multicast frames"
::= { vturAPWlanStatisticsEntry 9 }
-- vturAPWlanStaListTable
vturAPWlanStaListTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturAPWlanStaListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturAPWlan 6 }
vturAPWlanStaListEntry OBJECT-TYPE
SYNTAX VturAPWlanStaListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in VTUR AP Wlan Security Table."
INDEX { dot1dBasePort, staIndex }
::= { vturAPWlanStaListTable 1 }
VturAPWlanStaListEntry ::=
SEQUENCE {
staIndex INTEGER,
staMacAddr MacAddress
}
staIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of associated WLAN STA. Max = 32, Min = 1"
::= { vturAPWlanStaListEntry 1 }
staMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address of associated WLAN STA "
::= { vturAPWlanStaListEntry 2 }
-- vturConsoleSetup
vturConsoleSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 8 }
vturConsoleTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturConsoleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturConsoleSetup 1 }
vturConsoleEntry OBJECT-TYPE
SYNTAX VturConsoleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vturConsoleTable."
INDEX { dot1dBasePort}
::= { vturConsoleTable 1 }
VturConsoleEntry ::=
SEQUENCE {
vturConsoleSet INTEGER,
vturConsoleAdminPassword OCTET STRING,
vturConsoleUserPassword OCTET STRING
}
vturConsoleSet OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturConsoleEntry 1 }
vturConsoleAdminPassword OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The operation for vtur device admin password"
::= { vturConsoleEntry 2 }
vturConsoleUserPassword OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The operation for vtur device user password"
::= { vturConsoleEntry 3 }
-- vturRemoteFunctionSetup
vturRemoteFunctionSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 9 }
remoteFunctionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteFunctionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturRemoteFunctionSetup 1 }
remoteFunctionEntry OBJECT-TYPE
SYNTAX RemoteFunctionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in RemoteFunctionTable."
INDEX { dot1dBasePort}
::= { remoteFunctionTable 1 }
RemoteFunctionEntry ::=
SEQUENCE {
telnet INTEGER,
tftp INTEGER,
web INTEGER,
snmp INTEGER,
ssh INTEGER,
wireless INTEGER
}
telnet OBJECT-TYPE
SYNTAX INTEGER {
enable_all(1),
disable_all(2),
enable_lan_only(3),
enable_wan_only(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { remoteFunctionEntry 3 }
tftp OBJECT-TYPE
SYNTAX INTEGER {
enable_all(1),
disable_all(2),
enable_lan_only(3),
enable_wan_only(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { remoteFunctionEntry 4 }
web OBJECT-TYPE
SYNTAX INTEGER {
enable_all(1),
disable_all(2),
enable_lan_only(3),
enable_wan_only(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { remoteFunctionEntry 5 }
snmp OBJECT-TYPE
SYNTAX INTEGER {
enable_all(1),
disable_all(2),
enable_lan_only(3),
enable_wan_only(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { remoteFunctionEntry 6 }
ssh OBJECT-TYPE
SYNTAX INTEGER {
enable_all(1),
disable_all(2),
enable_lan_only(3),
enable_wan_only(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { remoteFunctionEntry 7 }
wireless OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { remoteFunctionEntry 8 }
---------------------------------------------------------------------------
---------------------------------------------------------------------------
-- vturMacTableSetup
vturMacTableSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 10 }
vturMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturMacTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturMacTableSetup 1 }
vturMacTableEntry OBJECT-TYPE
SYNTAX VturMacTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vturMacTable."
INDEX { dot1dBasePort, staIndex}
::= { vturMacTable 1 }
VturMacTableEntry ::=
SEQUENCE {
vturMacIndex INTEGER,
vturMacAddr MacAddress
}
vturMacIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of associated vtur STA. Max = 32, Min = 1"
::= { vturMacTableEntry 1 }
vturMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address of associated vtur STA "
::= { vturMacTableEntry 2 }
-- vturLanSetup
vturLanSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 11 }
vturLanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturLanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturLanSetup 1 }
vturLanEntry OBJECT-TYPE
SYNTAX VturLanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vturLanTable."
INDEX { dot1dBasePort }
::= { vturLanTable 1 }
VturLanEntry ::=
SEQUENCE {
vturLanIP IpAddress,
vturLanSubnetmask IpAddress,
vturDHCPOption INTEGER,
vturDHCPServerStartIPAddr IpAddress,
vturDHCPServerEndIPAddr IpAddress,
vturDHCPServerSubnetmask IpAddress,
vturDHCPServerIPAddr IpAddress
}
vturLanIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturLanEntry 1 }
vturLanSubnetmask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturLanEntry 2 }
vturDHCPOption OBJECT-TYPE
SYNTAX INTEGER{
disable_dhcp_server(1),
enable_dhcp_server(2),
dhcp_server_relay(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturLanEntry 3 }
vturDHCPServerStartIPAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturLanEntry 4 }
vturDHCPServerEndIPAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturLanEntry 5 }
vturDHCPServerSubnetmask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturLanEntry 6 }
vturDHCPServerIPAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturLanEntry 7 }
-----------------------------------------------------------------------------------------------
-- vturCFMSetup
vturCFMSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 12 }
vturCFMTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturCFMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturCFMSetup 1 }
vturCFMEntry OBJECT-TYPE
SYNTAX VturCFMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vturCFMTable."
INDEX { dot1dBasePort }
::= { vturCFMTable 1 }
VturCFMEntry ::=
SEQUENCE {
vturCFMCommit INTEGER,
vturCFMMdName OCTET STRING,
vturCFMMaName OCTET STRING,
vturCFMVid INTEGER,
vturCFMMepId Dot1agCfmMepId,
vturCFMMdLevel INTEGER,
vturCFMAction INTEGER,
vturCFMDestMAC OCTET STRING,
vturCFMLBMCount INTEGER,
vturCFMResultSentLBM INTEGER,
vturCFMResultInorderLBM INTEGER,
vturCFMResultOutorderLBM INTEGER,
vturMACAddr OCTET STRING,
vturCFMReadStatus INTEGER
}
vturCFMCommit OBJECT-TYPE
SYNTAX INTEGER
{
commit(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set 1 to commit CFM operation and read value always return 0"
::= { vturCFMEntry 1 }
vturCFMMdName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturCFMEntry 2 }
vturCFMMaName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturCFMEntry 3 }
vturCFMVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturCFMEntry 4 }
vturCFMMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepId
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturCFMEntry 5 }
vturCFMMdLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturCFMEntry 6 }
vturCFMAction OBJECT-TYPE
SYNTAX INTEGER
{
save(0),
enable_cfm(1),
disable_cfm(2),
send_loopback_message(3),
send_linktrace_message(4),
reset_configuration(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Currently only support 0:save ,3:send loopback message and 5:load cpe cfm default"
::= { vturCFMEntry 7 }
vturCFMDestMAC OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturCFMEntry 8 }
vturCFMLBMCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vturCFMEntry 9 }
vturCFMResultSentLBM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vturCFMEntry 10 }
vturCFMResultInorderLBM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vturCFMEntry 11 }
vturCFMResultOutorderLBM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vturCFMEntry 12 }
vturMACAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CPE MAC address"
::= { vturCFMEntry 13 }
vturCFMReadStatus OBJECT-TYPE
SYNTAX INTEGER
{
commit(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set 1 to commit CFM Read operation and read value always return 0"
::= { vturCFMEntry 14 }
------------------------------------------------------------------------------------------------
-- vturInfo
vturInfo OBJECT IDENTIFIER ::= { ves1616pe54 37 }
-- vturInfoTable
vturInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturInfo 1 }
vturInfoEntry OBJECT-TYPE
SYNTAX VturInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vturInfoTable."
INDEX { dot1dBasePort }
::= { vturInfoTable 1 }
VturInfoEntry ::=
SEQUENCE {
vturName DisplayString,
vturSysVersion DisplayString,
vturModemCodeVersion DisplayString
}
vturName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display remote device name"
::= { vturInfoEntry 1 }
vturSysVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display remote device system version info"
::= { vturInfoEntry 2 }
vturModemCodeVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display remote device VDSL modem code version info"
::= { vturInfoEntry 3 }
-- protocol-based VLAN
protoBasedVlanSetup OBJECT IDENTIFIER ::= { ves1616pe54 38 }
protoBasedVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProtoBasedVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanSetup 1 }
protoBasedVlanEntry OBJECT-TYPE
SYNTAX ProtoBasedVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in protoBasedVlanTable."
INDEX { protoBasedVlanPort, protoBasedVlanPacketType, protoBasedVlanEtherType }
::= { protoBasedVlanTable 1 }
ProtoBasedVlanEntry ::=
SEQUENCE {
protoBasedVlanPort INTEGER,
protoBasedVlanPacketType INTEGER,
protoBasedVlanEtherType INTEGER,
protoBasedVlanName DisplayString,
protoBasedVlanVid INTEGER,
protoBasedVlanPriority INTEGER,
protoBasedVlanState RowStatus
}
protoBasedVlanPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 1 }
protoBasedVlanPacketType OBJECT-TYPE
SYNTAX INTEGER {
etherII(1),
snap(2),
llc(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 2 }
protoBasedVlanEtherType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 3 }
protoBasedVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 4 }
protoBasedVlanVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 5 }
protoBasedVlanPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 6 }
protoBasedVlanState OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 7 }
-- classifierSetup
classifierSetup OBJECT IDENTIFIER ::= { ves1616pe54 39 }
classifierRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClassifierRuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { classifierSetup 1 }
classifierRuleEntry OBJECT-TYPE
SYNTAX ClassifierRuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in classifierRuleTable."
INDEX {classifierName }
::= { classifierRuleTable 1 }
ClassifierRuleEntry ::=
SEQUENCE {
classifierName DisplayString,
classifierEnable INTEGER,
classifierPacketFormat INTEGER,
classifierVlanId INTEGER,
classifier8021pPriority INTEGER,
classifierEtherType INTEGER,
classifierSrcMAC MacAddress,
classifierIncomingPort INTEGER,
classifierDstMAC MacAddress,
classifierDSCP INTEGER,
classifierIpProtocol INTEGER,
classifierEstablishOnly INTEGER,
classifierSrcIp IpAddress,
classifierSrcIpMask INTEGER,
classifierSrcSocket INTEGER,
classifierDstIp IpAddress,
classifierDstIpMask INTEGER,
classifierDstSocket INTEGER,
classifierRowstatus RowStatus,
classifierSrcIpv6 Ipv6Address,
classifierSrcIpv6Mask INTEGER,
classifierDstIpv6 Ipv6Address,
classifierDstIpv6Mask INTEGER
}
classifierName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of classifier rule."
::= { classifierRuleEntry 1 }
classifierEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Classifier rule enabled/disabled."
::= { classifierRuleEntry 2 }
classifierPacketFormat OBJECT-TYPE
SYNTAX INTEGER
{
all(1),
ethernetII-untagged(2),
ethernetII-tagged(3),
ethernet802_3-untagged(4),
ethernet802_3-tagged(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Packet format for classifier rule. All(1), 802.3 untagged(2), 802.3 tagged(3), EthernetII untagged(4), EthernetII tagged(5)."
::= { classifierRuleEntry 3 }
classifierVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Vlan id for classifer rule, 1~4094."
::= { classifierRuleEntry 4 }
classifier8021pPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1p priority for classifier rule, 0~7."
::= { classifierRuleEntry 5 }
classifierEtherType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ether type for classifier rule, in decimal expression."
::= { classifierRuleEntry 6 }
classifierSrcMAC OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source mac address for classifier rule"
::= { classifierRuleEntry 7 }
classifierIncomingPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Incoming Port for classifier rule"
::= { classifierRuleEntry 8 }
classifierDstMAC OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination mac address for classifier rule"
::= { classifierRuleEntry 9 }
classifierDSCP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DSCP for classifier rule"
::= { classifierRuleEntry 10 }
classifierIpProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP Protocol for classifier rule"
::= { classifierRuleEntry 11 }
classifierEstablishOnly OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP Protocol for EstablishOnly for classifier rule"
::= { classifierRuleEntry 12 }
classifierSrcIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP address for classifier rule"
::= { classifierRuleEntry 13 }
classifierSrcIpMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP Mask for classifier rule"
::= { classifierRuleEntry 14 }
classifierSrcSocket OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source Socket Number for classifier rule"
::= { classifierRuleEntry 15 }
classifierDstIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP address for classifier rule"
::= { classifierRuleEntry 16 }
classifierDstIpMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP Mask for classifier rule"
::= { classifierRuleEntry 17 }
classifierDstSocket OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination Socket Number for classifier rule"
::= { classifierRuleEntry 18 }
classifierRowstatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Row Status for classifier rule"
::= { classifierRuleEntry 19 }
classifierSrcIpv6 OBJECT-TYPE
SYNTAX Ipv6Address
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IPv6 address for classifier rule"
::= { classifierRuleEntry 20 }
classifierSrcIpv6Mask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IPv6 Mask for classifier rule"
::= { classifierRuleEntry 21 }
classifierDstIpv6 OBJECT-TYPE
SYNTAX Ipv6Address
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IPv6 address for classifier rule"
::= { classifierRuleEntry 22 }
classifierDstIpv6Mask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IPv6 Mask for classifier rule"
::= { classifierRuleEntry 23 }
classifierRuleSet OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"classifier Rule Set."
::= { classifierSetup 2 }
-- policySetup
policySetup OBJECT IDENTIFIER ::= { ves1616pe54 40 }
policyTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolicyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { policySetup 1 }
policyEntry OBJECT-TYPE
SYNTAX PolicyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in policyTable."
INDEX {policyName }
::= { policyTable 1 }
PolicyEntry ::=
SEQUENCE {
policyName DisplayString,
policyEnable INTEGER,
policyClassifier DisplayString,
policyVlanId INTEGER,
policyEgressPort INTEGER,
policyOutPktFormat INTEGER,
policy8021pPriority INTEGER,
policyDSCP INTEGER,
policyTOS INTEGER,
policyBandwidth INTEGER,
policyOutOfProfileDSCP INTEGER,
policyForwardingAction INTEGER,
policyPriorityAction INTEGER,
policyDiffServAction INTEGER,
policyOutgoingAction BITS,
policyMeteringEnable INTEGER,
policyOutOfProfileAction BITS,
policyRowstatus RowStatus
}
policyName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of policy rule."
::= { policyEntry 1 }
policyEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Policy rule enabled/disabled."
::= { policyEntry 2 }
policyClassifier OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Classifier of policy rule."
::= { policyEntry 3 }
policyVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Vlan id for policy rule, 1~4094."
::= { policyEntry 4 }
policyEgressPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress Port for policy rule"
::= { policyEntry 5 }
policyOutPktFormat OBJECT-TYPE
SYNTAX INTEGER
{
tag(1),
untag(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Outgoing packet format for Egress port for policy rule"
::= { policyEntry 6 }
policy8021pPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1p priority for policy rule, 0~7."
::= { policyEntry 7 }
policyDSCP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DSCP for policy rule."
::= { policyEntry 8 }
policyTOS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TOS for policy rule, 0~7"
::= { policyEntry 9 }
policyBandwidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bandwidth for policy rule"
::= { policyEntry 10 }
policyOutOfProfileDSCP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Out Of Profile DSCP for policy rule."
::= { policyEntry 11 }
policyForwardingAction OBJECT-TYPE
SYNTAX INTEGER
{
no-change(1),
discard-the-packet(2),
do-not-drop-the-matching-frame-previously-marked-for-dopping(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Forwarding Action for policy rule"
::= { policyEntry 12 }
policyPriorityAction OBJECT-TYPE
SYNTAX INTEGER
{
no-change(1),
set-the-packets-802_1-priority(2),
send-the-packet-to-priority-queue(3),
replace-the-802_1-priority-field-with-the-IP-TOS-value(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Priority Action for policy rule"
::= { policyEntry 13}
policyDiffServAction OBJECT-TYPE
SYNTAX INTEGER
{
no-change(1),
set-the-packets-TOS-field(2),
replace-the-IP-TOS-field-with-the-802_1-priority-value(3),
set-the-Diffserv-Codepoint-field-in-the-frame(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DiffServ Action for policy rule"
::= { policyEntry 14}
policyOutgoingAction OBJECT-TYPE
SYNTAX BITS {
send-the-packet-to-the-mirror-port(1),
send-the-packet-to-the-egress-port(2),
send-the-matching-frames-to-the-egress-port(3),
set-the-packets-VLAN-ID(4)
}
ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing Action for policy rule"
::= { policyEntry 15 }
policyMeteringEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Metering for Policy rule enabled/disabled."
::= { policyEntry 16 }
policyOutOfProfileAction OBJECT-TYPE
SYNTAX BITS {
drop-the-packet(1),
change-the-DSCP-value(2),
set-Out-Drop-Precedence(3),
do-not-drop-the-matching-frame-previously-marked-for-dropping(4)
}
ACCESS read-create
STATUS current
DESCRIPTION
"Out Of Profile Action for policy rule"
::= { policyEntry 17 }
policyRowstatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Row Status for policy rule"
::= { policyEntry 18 }
policyRuleSet OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"policy Rule Set."
::= { policySetup 2 }
-- switchCounterStatus
switchCounterStatus OBJECT IDENTIFIER ::= { ves1616pe54 42 }
vlanCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanCounterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { switchCounterStatus 1 }
vlanCounterEntry OBJECT-TYPE
SYNTAX VlanCounterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlanCounterTable."
INDEX { ifIndex, dot1qVlanIndex }
::= { vlanCounterTable 1 }
VlanCounterEntry ::=
SEQUENCE {
vlanCounterTxPkts Counter32,
vlanCounterRxPkts Counter32
}
vlanCounterTxPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanCounterEntry 1 }
vlanCounterRxPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { vlanCounterEntry 2 }
-- switchCounterTable
switchCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchCounterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { switchCounterStatus 2 }
switchCounterEntry OBJECT-TYPE
SYNTAX SwitchCounterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in switchCounterTable."
INDEX { dot1dBasePort }
::= { switchCounterTable 1 }
SwitchCounterEntry ::=
SEQUENCE {
switchUnknownUnicastCounter Counter32
}
switchUnknownUnicastCounter OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unknown unicast counter for the port."
::= { switchCounterEntry 1 }
-- vlanCounterResetTable
vlanCounterResetTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanCounterResetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { switchCounterStatus 3 }
vlanCounterResetEntry OBJECT-TYPE
SYNTAX VlanCounterResetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlanCounterTable."
INDEX { dot1qVlanIndex }
::= { vlanCounterResetTable 1 }
VlanCounterResetEntry ::=
SEQUENCE {
vlanCounterReset INTEGER
}
vlanCounterReset OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear VLAN counters."
::= { vlanCounterResetEntry 1 }
-- vlanCounterSwitchSetup
vlanCounterSwitchSetup OBJECT IDENTIFIER ::= { switchCounterStatus 4 }
vlanCounterSwitch OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Switch VLAN counters on/off."
::= { vlanCounterSwitchSetup 1 }
vlanCounterVlan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN counter per vlan."
::= { vlanCounterSwitchSetup 2 }
vlanCounterPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN counters per port."
::= { vlanCounterSwitchSetup 3 }
vlanCounterDirection OBJECT-TYPE
SYNTAX INTEGER {
tx(1),
rx(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN counters per direction."
::= { vlanCounterSwitchSetup 4 }
-- rateLimitProfilePortSetup
rateLimitProfilePortSetup OBJECT IDENTIFIER ::= { ves1616pe54 43 }
rateLimitProfilePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RateLimitProfilePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { rateLimitProfilePortSetup 1 }
rateLimitProfilePortEntry OBJECT-TYPE
SYNTAX RateLimitProfilePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in rateLimitProfilePortTable."
INDEX { dot1dBasePort }
::= { rateLimitProfilePortTable 1 }
RateLimitProfilePortEntry ::=
SEQUENCE {
rateLimitPortProfile DisplayString
}
rateLimitPortProfile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { rateLimitProfilePortEntry 1 }
perQueueProfilePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PerQueueProfilePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { rateLimitProfilePortSetup 2 }
perQueueProfilePortEntry OBJECT-TYPE
SYNTAX PerQueueProfilePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in perQueueProfilePortTable."
INDEX { dot1dBasePort }
::= { perQueueProfilePortTable 1 }
PerQueueProfilePortEntry ::=
SEQUENCE {
perQueuePortProfile DisplayString
}
perQueuePortProfile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { perQueueProfilePortEntry 1 }
----------------------------------------------------
-- rateLimitProfileSetup
rateLimitProfileSetup OBJECT IDENTIFIER ::= { ves1616pe54 44 }
rateLimitMaxNumberOfProfile OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { rateLimitProfileSetup 1 }
rateLimitProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF RateLimitProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { rateLimitProfileSetup 2 }
rateLimitProfileEntry OBJECT-TYPE
SYNTAX RateLimitProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in rateLimitMaxNumberOfProfile."
INDEX { rateLimitProfileName }
::= { rateLimitProfileTable 1 }
RateLimitProfileEntry ::=
SEQUENCE {
rateLimitProfileName DisplayString,
rateLimitProfilePeakRate INTEGER,
rateLimitProfileEgrRate INTEGER,
rateLimitProfileCommitRate INTEGER,
rateLimitProfilePeakState EnabledStatus,
rateLimitProfileEgrState EnabledStatus,
rateLimitProfileCommitState EnabledStatus,
rateLimitProfileRowStatus RowStatus
}
rateLimitProfileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { rateLimitProfileEntry 1 }
rateLimitProfilePeakRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000."
::= { rateLimitProfileEntry 2 }
rateLimitProfileEgrRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000."
::= { rateLimitProfileEntry 3 }
rateLimitProfileCommitRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000."
::= { rateLimitProfileEntry 4 }
rateLimitProfilePeakState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress peak rate limiting enabled/disabled on the port."
::= { rateLimitProfileEntry 5 }
rateLimitProfileEgrState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress rate limiting enabled/disabled on the port."
::= { rateLimitProfileEntry 6 }
rateLimitProfileCommitState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress commit rate limiting enabled/disabled on the port."
::= { rateLimitProfileEntry 7 }
rateLimitProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { rateLimitProfileEntry 8 }
perQueueMaxNumberOfProfile OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { rateLimitProfileSetup 3 }
perQueueProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF PerQueueProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { rateLimitProfileSetup 4 }
perQueueProfileEntry OBJECT-TYPE
SYNTAX PerQueueProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in perQueueMaxNumberOfProfile."
INDEX { perQueueProfileName }
::= { perQueueProfileTable 1 }
PerQueueProfileEntry ::=
SEQUENCE {
perQueueProfileName DisplayString,
perQueueProfileQ0CIR INTEGER,
perQueueProfileQ0PIR INTEGER,
perQueueProfileQ1CIR INTEGER,
perQueueProfileQ1PIR INTEGER,
perQueueProfileQ2CIR INTEGER,
perQueueProfileQ2PIR INTEGER,
perQueueProfileQ3CIR INTEGER,
perQueueProfileQ3PIR INTEGER,
perQueueProfileQ4CIR INTEGER,
perQueueProfileQ4PIR INTEGER,
perQueueProfileQ5CIR INTEGER,
perQueueProfileQ5PIR INTEGER,
perQueueProfileQ6CIR INTEGER,
perQueueProfileQ6PIR INTEGER,
perQueueProfileQ7CIR INTEGER,
perQueueProfileQ7PIR INTEGER,
perQueueProfileRowStatus RowStatus
}
perQueueProfileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { perQueueProfileEntry 1 }
perQueueProfileQ0CIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commit rate of Queue0 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 2 }
perQueueProfileQ0PIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak rate of Queue0 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 3 }
perQueueProfileQ1CIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commit rate of Queue1 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 4 }
perQueueProfileQ1PIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak rate of Queue1 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 5 }
perQueueProfileQ2CIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commit rate of Queue2 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 6 }
perQueueProfileQ2PIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak rate of Queue2 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 7 }
perQueueProfileQ3CIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commit rate of Queue3 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 8 }
perQueueProfileQ3PIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak rate of Queue3 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 9 }
perQueueProfileQ4CIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commit rate of Queue4 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 10 }
perQueueProfileQ4PIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak rate of Queue4 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 11 }
perQueueProfileQ5CIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commit rate of Queue5 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 12 }
perQueueProfileQ5PIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak rate of Queue5 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 13 }
perQueueProfileQ6CIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commit rate of Queue6 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 14 }
perQueueProfileQ6PIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak rate of Queue6 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 15 }
perQueueProfileQ7CIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commit rate of Queue7 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 16 }
perQueueProfileQ7PIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak rate of Queue7 in Kbit/s. The range is between 0 and 1000,000."
::= { perQueueProfileEntry 17 }
perQueueProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { perQueueProfileEntry 18 }
------------------------
-- vlanSecuritySetup
vlanSecuritySetup OBJECT IDENTIFIER ::= { ves1616pe54 45 }
vlanSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanSecurityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanSecuritySetup 1 }
vlanSecurityEntry OBJECT-TYPE
SYNTAX VlanSecurityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlanSecurityTable."
INDEX { dot1qVlanIndex }
::= { vlanSecurityTable 1 }
VlanSecurityEntry ::=
SEQUENCE {
vlanSecurityCount INTEGER
}
vlanSecurityCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of (dynamic) MAC addresses that may be learned on the VID."
::= { vlanSecurityEntry 1}
----------------------------
-- cfmSetup
cfmSetup OBJECT IDENTIFIER ::= { ves1616pe54 46 }
-- cfmLoopbackPortTable
cfmLoopbackPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfmLoopbackPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { cfmSetup 1 }
cfmLoopbackPortEntry OBJECT-TYPE
SYNTAX CfmLoopbackPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in cfmLoopbackPortTable."
INDEX { dot1dBasePort }
::= { cfmLoopbackPortTable 1 }
CfmLoopbackPortEntry ::=
SEQUENCE {
cfmLoopbackPortState EnabledStatus
}
cfmLoopbackPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CFM loopback enabled/disabled on the port."
::= { cfmLoopbackPortEntry 1 }
cfmMIPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfmMIPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { cfmSetup 2 }
cfmMIPEntry OBJECT-TYPE
SYNTAX CfmMIPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in cfmMIPTable."
INDEX { cfmLevel, cfmVlanID, cfmPort }
::= { cfmMIPTable 1 }
CfmMIPEntry ::=
SEQUENCE {
cfmPort INTEGER,
cfmVlanID INTEGER,
cfmLevel INTEGER,
cfmMIPRowStatus RowStatus
}
cfmPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { cfmMIPEntry 1 }
cfmVlanID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { cfmMIPEntry 2 }
cfmLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { cfmMIPEntry 3 }
cfmMIPRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { cfmMIPEntry 4 }
cfmActionEnableStatus OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CFM Action enable status for the CO device"
::= { cfmSetup 3 }
-- MRSTP
mrstp OBJECT IDENTIFIER ::= { ves1616pe54 48 }
mrstpSetup OBJECT IDENTIFIER ::= { mrstp 1 }
mrstpBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MrstpBridgeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { mrstpSetup 1 }
mrstpBridgeEntry OBJECT-TYPE
SYNTAX MrstpBridgeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mrstpBridgeTable."
INDEX { mrstpBridgeIndex }
::= { mrstpBridgeTable 1 }
MrstpBridgeEntry ::=
SEQUENCE {
mrstpBridgeIndex INTEGER,
mrstpState INTEGER,
mrstpProtocolSpecification INTEGER,
mrstpPriority INTEGER,
mrstpTimeSinceTopologyChange TimeTicks,
mrstpTopChanges Counter,
mrstpDesignatedRoot BridgeId,
mrstpRootCost INTEGER,
mrstpRootPort INTEGER,
mrstpMaxAge Timeout,
mrstpHelloTime Timeout,
mrstpHoldTime INTEGER,
mrstpForwardDelay Timeout,
mrstpBridgeMaxAge Timeout,
mrstpBridgeHelloTime Timeout,
mrstpBridgeForwardDelay Timeout
}
-- the dot1dStp group
-- Implementation of the dot1dStp group is optional. It is
-- implemented by those bridges that support the Spanning Tree
-- Protocol.
mrstpBridgeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The tree index of the MRSTP."
::= { mrstpBridgeEntry 1 }
mrstpState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabled/disabled on the mrstp bridge."
::= { mrstpBridgeEntry 2 }
mrstpProtocolSpecification OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
decLb100(2),
ieee8021d(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined."
::= { mrstpBridgeEntry 3 }
mrstpPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.7"
::= { mrstpBridgeEntry 4 }
mrstpTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { mrstpBridgeEntry 5 }
mrstpTopChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { mrstpBridgeEntry 6 }
mrstpDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.1"
::= { mrstpBridgeEntry 7 }
mrstpRootCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost of the path to the root as seen from
this bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.2"
::= { mrstpBridgeEntry 8 }
mrstpRootPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port which offers the
lowest cost path from this bridge to the root
bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.3"
::= { mrstpBridgeEntry 9 }
mrstpMaxAge OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.4"
::= { mrstpBridgeEntry 10 }
mrstpHelloTime OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.5"
::= { mrstpBridgeEntry 11 }
mrstpHoldTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.14"
::= { mrstpBridgeEntry 12 }
mrstpForwardDelay OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
mrstpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]"
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.6"
::= { mrstpBridgeEntry 13 }
mrstpBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mrstpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.8"
::= { mrstpBridgeEntry 14 }
mrstpBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.9"
::= { mrstpBridgeEntry 15 }
mrstpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mrstpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.10"
::= { mrstpBridgeEntry 16 }
-- The Spanning Tree Port Table
mrstpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MrstpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains port-specific information
for the Spanning Tree Protocol."
::= { mrstpSetup 2 }
mrstpPortEntry OBJECT-TYPE
SYNTAX MrstpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every port
about the Spanning Tree Protocol state for that
port."
INDEX { mrstpPort }
::= { mrstpPortTable 1 }
MrstpPortEntry ::=
SEQUENCE {
mrstpPort
INTEGER,
mrstpPortPriority
INTEGER,
mrstpPortState
INTEGER,
mrstpPortEnable
INTEGER,
mrstpPortPathCost
INTEGER,
mrstpPortDesignatedRoot
BridgeId,
mrstpPortDesignatedCost
INTEGER,
mrstpPortDesignatedBridge
BridgeId,
mrstpPortDesignatedPort
OCTET STRING,
mrstpPortForwardTransitions
Counter,
mrstpPortOnBridgeIndex
INTEGER
}
mrstpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.2.1.2"
::= { mrstpPortEntry 1 }
mrstpPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
mrstpPort."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.1"
::= { mrstpPortEntry 2 }
mrstpPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see mrstpPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { mrstpPortEntry 3 }
mrstpPortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled/disabled status of the port."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { mrstpPortEntry 4 }
mrstpPortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { mrstpPortEntry 5 }
mrstpPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { mrstpPortEntry 6 }
mrstpPortDesignatedCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { mrstpPortEntry 7 }
mrstpPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.6"
::= { mrstpPortEntry 8 }
mrstpPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.7"
::= { mrstpPortEntry 9 }
mrstpPortForwardTransitions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { mrstpPortEntry 10 }
mrstpPortOnBridgeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indetify the bridge index that this port joined to in MRSTP."
::= { mrstpPortEntry 11 }
-- MRSTP Trap
mrstpNotifications OBJECT IDENTIFIER ::= { mrstp 2 }
newRoot NOTIFICATION-TYPE
OBJECTS {
mrstpBridgeIndex
}
STATUS current
DESCRIPTION
""
::= { mrstpNotifications 1 }
topologyChange NOTIFICATION-TYPE
OBJECTS {
mrstpBridgeIndex
}
STATUS current
DESCRIPTION
""
::= { mrstpNotifications 2 }
---------------------------------------------------
--
-- dhcp snooping
--
---------------------------------------------------
dhcpSnp OBJECT IDENTIFIER ::= { ves1616pe54 49 }
--
-- dhcp snooping vlan table
--
dhcpSnpVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnpVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnp 1 }
dhcpSnpVlanEntry OBJECT-TYPE
SYNTAX DhcpSnpVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { dhcpSnpVlanEntryVid }
::= { dhcpSnpVlanTable 1 }
DhcpSnpVlanEntry ::=
SEQUENCE {
dhcpSnpVlanEntryVid INTEGER,
dhcpSnpVlanEntryEnable EnabledStatus,
dhcpSnpVlanEntryOption82Enable EnabledStatus,
dhcpSnpVlanEntryInfo EnabledStatus
}
dhcpSnpVlanEntryVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpVlanEntry 1 }
dhcpSnpVlanEntryEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpVlanEntry 2 }
dhcpSnpVlanEntryOption82Enable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpVlanEntry 3 }
dhcpSnpVlanEntryInfo OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpVlanEntry 4 }
--
-- dhcp snooping interface table
--
dhcpSnpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnp 2 }
dhcpSnpPortEntry OBJECT-TYPE
SYNTAX DhcpSnpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { dhcpSnpPortEntryPort }
::= { dhcpSnpPortTable 1 }
DhcpSnpPortEntry ::=
SEQUENCE {
dhcpSnpPortEntryPort INTEGER,
dhcpSnpPortEntryTrust EnabledStatus,
dhcpSnpPortEntryRate INTEGER
}
dhcpSnpPortEntryPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpPortEntry 1 }
dhcpSnpPortEntryTrust OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpPortEntry 2 }
dhcpSnpPortEntryRate OBJECT-TYPE
SYNTAX INTEGER (0..2048)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0 means unlimited"
::= { dhcpSnpPortEntry 3 }
--
-- dhcp snooping binding table
--
dhcpSnpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnpBindEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnp 3 }
dhcpSnpBindEntry OBJECT-TYPE
SYNTAX DhcpSnpBindEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { dhcpSnpBindEntryMac, dhcpSnpBindEntryVid }
::= { dhcpSnpBindTable 1 }
DhcpSnpBindEntry ::=
SEQUENCE {
dhcpSnpBindEntryMac MacAddress,
dhcpSnpBindEntryVid INTEGER,
dhcpSnpBindEntryIP IpAddress,
dhcpSnpBindEntryLease INTEGER,
dhcpSnpBindEntryType INTEGER,
dhcpSnpBindEntryPort INTEGER
}
dhcpSnpBindEntryMac OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpBindEntry 1 }
dhcpSnpBindEntryVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpBindEntry 2 }
dhcpSnpBindEntryIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpBindEntry 3 }
dhcpSnpBindEntryLease OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpBindEntry 4 }
dhcpSnpBindEntryType OBJECT-TYPE
SYNTAX INTEGER { dynamic(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpBindEntry 5 }
dhcpSnpBindEntryPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpBindEntry 6 }
--
-- dhcp snooping
--
dhcpSnpEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnp 4 }
--
-- dhcp snooping database
--
dhcpSnpDb OBJECT IDENTIFIER ::= { dhcpSnp 5 }
dhcpSnpDbAbort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDb 1 }
dhcpSnpDbWriteDelay OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDb 2 }
dhcpSnpDbUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDb 3 }
dhcpSnpDbUrlRenew OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDb 4 }
dhcpSnpDbStat OBJECT IDENTIFIER ::= { dhcpSnpDb 5 }
dhcpSnpDbStatClear OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 1 }
dhcpSnpDbStatAgentRunning OBJECT-TYPE
SYNTAX INTEGER { none(0), read(1), write(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 2 }
dhcpSnpDbStatDelayExpiry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 3 }
dhcpSnpDbStatAbortExpiry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 4 }
dhcpSnpDbStatLastSuccTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 5 }
dhcpSnpDbStatLastFailTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 6 }
dhcpSnpDbStatLastFailReason OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 7 }
dhcpSnpDbStatTotalAttempt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 8 }
dhcpSnpDbStatStartupFail OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 9 }
dhcpSnpDbStatSuccTrans OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 10 }
dhcpSnpDbStatFailTrans OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 11 }
dhcpSnpDbStatSuccRead OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 12 }
dhcpSnpDbStatFailRead OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 13 }
dhcpSnpDbStatSuccWrite OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 14 }
dhcpSnpDbStatFailWrite OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 15 }
dhcpSnpDbStatFirstSuccAccess OBJECT-TYPE
SYNTAX INTEGER { none(0), read(1), write(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpSnpDbStat 16 }
dhcpSnpDbStatLastIgnoreBindCol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last ignored: binding collision"
::= { dhcpSnpDbStat 17 }
dhcpSnpDbStatLastIgnoreExpireLease OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last ignored: expired leases"
::= { dhcpSnpDbStat 18 }
dhcpSnpDbStatLastIgnoreInvalidIntf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last ignored: invalid interface"
::= { dhcpSnpDbStat 19 }
dhcpSnpDbStatLastIgnoreUnsuppVlan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last ignored: unsupported vlans"
::= { dhcpSnpDbStat 20 }
dhcpSnpDbStatLastIgnoreParse OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last ignored: parsing error"
::= { dhcpSnpDbStat 21 }
dhcpSnpDbStatTotalIgnoreBindCol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total ignored: binding collision"
::= { dhcpSnpDbStat 22 }
dhcpSnpDbStatTotalIgnoreExpireLease OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total ignored: expired leases"
::= { dhcpSnpDbStat 23 }
dhcpSnpDbStatTotalIgnoreInvalidIntf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total ignored: invalid interface"
::= { dhcpSnpDbStat 24 }
dhcpSnpDbStatTotalIgnoreUnsuppVlan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total ignored: unsupported vlans"
::= { dhcpSnpDbStat 25 }
dhcpSnpDbStatTotalIgnoreParse OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total ignored: parsing error"
::= { dhcpSnpDbStat 26 }
dhcpSnpDbStatFirstSuccessAccess OBJECT-TYPE
SYNTAX INTEGER{
none(0),
read(1),
write(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"First Success Access"
::= { dhcpSnpDbStat 27 }
--
-- dhcp snooping dhcp vlan
--
dhcpSnpDhcpVlan OBJECT IDENTIFIER ::= { dhcpSnp 6 }
dhcpSnpDhcpVlanVid OBJECT-TYPE
SYNTAX INTEGER (0..4094)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0: disable DHCP VLAN."
::= { dhcpSnpDhcpVlan 1 }
-- --------------------------------------------------------------
--
-- ip source guard
--
-- --------------------------------------------------------------
ipsg OBJECT IDENTIFIER ::= { ves1616pe54 50 }
ipsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { ipsg 1 }
ipsgEntry OBJECT-TYPE
SYNTAX IpsgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { ipsgEntryMac, ipsgEntryVid }
::= { ipsgTable 1 }
IpsgEntry ::=
SEQUENCE {
ipsgEntryMac MacAddress,
ipsgEntryVid INTEGER,
ipsgEntryIp IpAddress,
ipsgEntryLease INTEGER,
ipsgEntryType INTEGER,
ipsgEntryPort INTEGER,
ipsgEntryState RowStatus
}
ipsgEntryMac OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { ipsgEntry 1 }
ipsgEntryVid OBJECT-TYPE
SYNTAX INTEGER (1.. 4094)
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { ipsgEntry 2 }
ipsgEntryIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { ipsgEntry 3 }
ipsgEntryLease OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"second"
::= { ipsgEntry 4 }
ipsgEntryType OBJECT-TYPE
SYNTAX INTEGER { static(1), dhcp(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { ipsgEntry 5 }
ipsgEntryPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0 means any port"
::= { ipsgEntry 6 }
ipsgEntryState OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { ipsgEntry 7 }
-- --------------------------------------------------------------
--
-- arpInspect
--
-- --------------------------------------------------------------
arpInspect OBJECT IDENTIFIER ::= { ves1616pe54 51 }
arpInspectSetup OBJECT IDENTIFIER ::= { arpInspect 1 }
arpInspectState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectSetup 1 }
arpInspectFilterAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectSetup 2 }
arpInspectLog OBJECT IDENTIFIER ::= { arpInspectSetup 3 }
arpInspectLogEntries OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectLog 1 }
arpInspectLogRate OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectLog 2 }
arpInspectLogInterval OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectLog 3 }
--arpInspectVlanTable
arpInspectVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpInspectVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { arpInspectSetup 4 }
arpInspectVlanEntry OBJECT-TYPE
SYNTAX ArpInspectVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { arpInspectVlanVid }
::= { arpInspectVlanTable 1 }
ArpInspectVlanEntry ::=
SEQUENCE {
arpInspectVlanVid INTEGER,
arpInspectVlanLog INTEGER,
arpInspectVlanStatus INTEGER
}
arpInspectVlanVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectVlanEntry 1 }
arpInspectVlanLog OBJECT-TYPE
SYNTAX INTEGER {
all (1),
none (2),
permit (3),
deny (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectVlanEntry 2 }
arpInspectVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectVlanEntry 3 }
--arpInspectPortTable
arpInspectPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpInspectPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { arpInspectSetup 5 }
arpInspectPortEntry OBJECT-TYPE
SYNTAX ArpInspectPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { arpInspectPortIndex }
::= { arpInspectPortTable 1 }
ArpInspectPortEntry ::=
SEQUENCE {
arpInspectPortIndex INTEGER,
arpInspectPortTrust INTEGER,
arpInspectPortRate INTEGER,
arpInspectPortInterval INTEGER
}
arpInspectPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectPortEntry 1 }
arpInspectPortTrust OBJECT-TYPE
SYNTAX INTEGER {
trusted(1),
untrusted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectPortEntry 2 }
arpInspectPortRate OBJECT-TYPE
SYNTAX INTEGER (0..2048)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectPortEntry 3 }
arpInspectPortInterval OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectPortEntry 4 }
arpInspectStatus OBJECT IDENTIFIER ::= { arpInspect 2 }
arpInspectFilterClear OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatus 1 }
arpInspectLogClear OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatus 2 }
--arpInspectFilterTable
arpInspectFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpInspectFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatus 3 }
arpInspectFilterEntry OBJECT-TYPE
SYNTAX ArpInspectFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { arpInspectFilterMac, arpInspectFilterVid }
::= { arpInspectFilterTable 1 }
ArpInspectFilterEntry ::=
SEQUENCE {
arpInspectFilterMac MacAddress,
arpInspectFilterVid INTEGER,
arpInspectFilterPort INTEGER,
arpInspectFilterExpiry INTEGER,
arpInspectFilterReason INTEGER,
arpInspectFilterRowStatus RowStatus
}
arpInspectFilterMac OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectFilterEntry 1 }
arpInspectFilterVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectFilterEntry 2 }
arpInspectFilterPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectFilterEntry 3 }
arpInspectFilterExpiry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectFilterEntry 4 }
arpInspectFilterReason OBJECT-TYPE
SYNTAX INTEGER {
macVid(1),
port(2),
ip(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectFilterEntry 5 }
arpInspectFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { arpInspectFilterEntry 6 }
--arpInspectLogTable
arpInspectLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpInspectLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatus 4 }
arpInspectLogEntry OBJECT-TYPE
SYNTAX ArpInspectLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { arpInspectLogMac, arpInspectLogVid, arpInspectLogPort, arpInspectLogIp, arpInspectLogReason }
::= { arpInspectLogTable 1 }
ArpInspectLogEntry ::=
SEQUENCE {
arpInspectLogMac MacAddress,
arpInspectLogVid INTEGER,
arpInspectLogPort INTEGER,
arpInspectLogIp IpAddress,
arpInspectLogNumPkt INTEGER,
arpInspectLogReason INTEGER,
arpInspectLogTime DateAndTime
}
arpInspectLogMac OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectLogEntry 1 }
arpInspectLogVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectLogEntry 2 }
arpInspectLogPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectLogEntry 3 }
arpInspectLogIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectLogEntry 4 }
arpInspectLogNumPkt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectLogEntry 5 }
arpInspectLogReason OBJECT-TYPE
SYNTAX INTEGER {
deny (1),
denyStatic (2),
denyDHCP (3),
permitStatic (4),
permitDHCP (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectLogEntry 6 }
arpInspectLogTime OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectLogEntry 7 }
--arpInspectStatisticsTable
arpInspectStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpInspectStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatus 5 }
arpInspectStatisticsEntry OBJECT-TYPE
SYNTAX ArpInspectStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { arpInspectStatisticsVid }
::= { arpInspectStatisticsTable 1 }
ArpInspectStatisticsEntry ::=
SEQUENCE {
arpInspectStatisticsVid INTEGER,
arpInspectStatisticsReceived Counter,
arpInspectStatisticsRequest Counter,
arpInspectStatisticsReply Counter,
arpInspectStatisticsForward Counter,
arpInspectStatisticsDrop Counter,
arpInspectStatisticsClear EnabledStatus
}
arpInspectStatisticsVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatisticsEntry 1 }
arpInspectStatisticsReceived OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatisticsEntry 2 }
arpInspectStatisticsRequest OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatisticsEntry 3 }
arpInspectStatisticsReply OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatisticsEntry 4 }
arpInspectStatisticsForward OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatisticsEntry 5 }
arpInspectStatisticsDrop OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatisticsEntry 6 }
arpInspectStatisticsClear OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { arpInspectStatisticsEntry 7 }
-- trTCMSetup
trTCMSetup OBJECT IDENTIFIER ::= { ves1616pe54 52 }
trTCMState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Two-rate three color marker enabled/disabled for the switch."
::= { trTCMSetup 1 }
trTCMMode OBJECT-TYPE
SYNTAX INTEGER {
color-aware(0),
color-blind(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { trTCMSetup 2 }
-- trTCMPortTable
trTCMPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrTCMPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { trTCMSetup 3 }
trTCMPortEntry OBJECT-TYPE
SYNTAX TrTCMPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in trTCMPortTable."
INDEX { dot1dBasePort }
::= { trTCMPortTable 1 }
TrTCMPortEntry ::=
SEQUENCE {
trTCMPortState EnabledStatus,
trTCMPortCIR INTEGER,
trTCMPortPIR INTEGER,
trTCMPortDscpGreen INTEGER,
trTCMPortDscpYellow INTEGER,
trTCMPortDscpRed INTEGER
}
trTCMPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Two-rate three color marker enabled/disabled on the port."
::= { trTCMPortEntry 1 }
trTCMPortCIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Allowed CIR in pkts/s."
::= { trTCMPortEntry 2 }
trTCMPortPIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Allowed PIR in pkts/s."
::= { trTCMPortEntry 3 }
trTCMPortDscpGreen OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-63"
::= { trTCMPortEntry 4 }
trTCMPortDscpYellow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-63"
::= { trTCMPortEntry 5 }
trTCMPortDscpRed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-63"
::= { trTCMPortEntry 6 }
-- loopGuardSetup
loopGuardSetup OBJECT IDENTIFIER ::= { ves1616pe54 53 }
loopGuardState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { loopGuardSetup 1 }
-- loopGuardPortTable
loopGuardPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoopGuardPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { loopGuardSetup 2 }
loopGuardPortEntry OBJECT-TYPE
SYNTAX LoopGuardPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in loopGuardPortTable."
INDEX { dot1dBasePort }
::= { loopGuardPortTable 1 }
LoopGuardPortEntry ::=
SEQUENCE {
loopGuardPortState EnabledStatus,
loopGuardPortMode INTEGER,
loopGuardPortRecoverTime INTEGER
}
loopGuardPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { loopGuardPortEntry 1 }
loopGuardPortMode OBJECT-TYPE
SYNTAX INTEGER {
fix(1),
dynamic(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify loopguard mode for each port"
::= { loopGuardPortEntry 2 }
loopGuardPortRecoverTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"recover time to activate port in seconds."
::= { loopGuardPortEntry 3 }
-- subnetBasedVlanSetup
subnetBasedVlanSetup OBJECT IDENTIFIER ::= { ves1616pe54 54 }
subnetBasedVlanState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"subnet-based vlan feature enabled/disabled for the switch."
::= { subnetBasedVlanSetup 1 }
dhcpVlanOverrideState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"dhcp vlan override enabled/disabled when subnet-based vlan is enabled."
::= { subnetBasedVlanSetup 2 }
subnetBasedVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubnetBasedVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { subnetBasedVlanSetup 3 }
subnetBasedVlanEntry OBJECT-TYPE
SYNTAX SubnetBasedVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in subnetBasedVlanTable."
INDEX {subnetBasedVlanSrcIp , subnetBasedVlanSrcMaskBit}
::= { subnetBasedVlanTable 1 }
SubnetBasedVlanEntry ::=
SEQUENCE {
subnetBasedVlanSrcIp IpAddress,
subnetBasedVlanSrcMaskBit INTEGER,
subnetBasedVlanName DisplayString,
subnetBasedVlanVid INTEGER,
subnetBasedVlanPriority INTEGER,
subnetBasedVlanEntryState RowStatus
}
subnetBasedVlanSrcIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"source ip for subnet-based vlan entry"
::= { subnetBasedVlanEntry 1 }
subnetBasedVlanSrcMaskBit OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"source ip mask-bits for subnet-based vlan entry"
::= { subnetBasedVlanEntry 2 }
subnetBasedVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"name for subnet-based vlan entry"
::= { subnetBasedVlanEntry 3 }
subnetBasedVlanVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"vid for subnet-based vlan entry"
::= { subnetBasedVlanEntry 4 }
subnetBasedVlanPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"priority for subnet-based vlan entry"
::= { subnetBasedVlanEntry 5 }
subnetBasedVlanEntryState OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { subnetBasedVlanEntry 6 }
subnetBasedVlanInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubnetBasedVlanInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { subnetBasedVlanSetup 4 }
subnetBasedVlanInfoEntry OBJECT-TYPE
SYNTAX SubnetBasedVlanInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in subnetBasedVlanInfoTable."
INDEX {subnetBasedVlanInfoSrcIpType , subnetBasedVlanInfoSrcIp , subnetBasedVlanInfoSrcMaskBit}
::= { subnetBasedVlanInfoTable 1 }
SubnetBasedVlanInfoEntry ::=
SEQUENCE {
subnetBasedVlanInfoSrcIpType InetAddressType,
subnetBasedVlanInfoSrcIp InetAddress,
subnetBasedVlanInfoSrcMaskBit INTEGER,
subnetBasedVlanInfoName DisplayString,
subnetBasedVlanInfoVid INTEGER,
subnetBasedVlanInfoPriority INTEGER,
subnetBasedVlanInfoEntryState RowStatus
}
subnetBasedVlanInfoSrcIpType OBJECT-TYPE
SYNTAX InetAddressType {ipv4(1), ipv6(2)}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip type for subnet-based vlan entry"
::= { subnetBasedVlanInfoEntry 1 }
subnetBasedVlanInfoSrcIp OBJECT-TYPE
SYNTAX InetAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"source ip of IPv4 or IPv6 for subnet-based vlan entry"
::= { subnetBasedVlanInfoEntry 2 }
subnetBasedVlanInfoSrcMaskBit OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"source ip mask-bits for subnet-based vlan entry"
::= { subnetBasedVlanInfoEntry 3 }
subnetBasedVlanInfoName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"name for subnet-based vlan entry"
::= { subnetBasedVlanInfoEntry 4 }
subnetBasedVlanInfoVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"vid for subnet-based vlan entry"
::= { subnetBasedVlanInfoEntry 5 }
subnetBasedVlanInfoPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"priority for subnet-based vlan entry"
::= { subnetBasedVlanInfoEntry 6 }
subnetBasedVlanInfoEntryState OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { subnetBasedVlanInfoEntry 7 }
-- MAC Authentication
macAuthenticationSetup OBJECT IDENTIFIER ::= { ves1616pe54 55 }
macAuthenticationState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { macAuthenticationSetup 1 }
macAuthenticationNamePrefix OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { macAuthenticationSetup 2 }
macAuthenticationPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { macAuthenticationSetup 3 }
macAuthenticationTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { macAuthenticationSetup 4 }
-- macAuthenticationPortTable
macAuthenticationPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacAuthenticationPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { macAuthenticationSetup 5 }
macAuthenticationPortEntry OBJECT-TYPE
SYNTAX MacAuthenticationPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in macAuthenticationPortTable."
INDEX { dot1dBasePort }
::= { macAuthenticationPortTable 1 }
MacAuthenticationPortEntry ::=
SEQUENCE {
macAuthenticationPortState EnabledStatus
}
macAuthenticationPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { macAuthenticationPortEntry 1 }
-- MSTP
--****************************************************************
-- TEXTUAL-CONVENTIONs
--****************************************************************
MstiOrCistInstanceIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention is an extension of the
MstiInstanceIndex convention. This extension permits the
additional value of zero, which means Common and Internal
Spanning Tree (CIST)."
SYNTAX Integer32 (0..16)
mstp OBJECT IDENTIFIER ::= { ves1616pe54 56 }
-- mstpGen group reflects configurations/statuses
-- the Bridge as a unit
mstpGen OBJECT IDENTIFIER ::= { mstp 1}
mstpGenState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabled/disabled on the mrstp bridge."
::= { mstpGen 1 }
mstpGenCfgIdName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configuration name that identifies the MST
region and is used as one of the inputs in the
computation of the MST Configuration Identifier."
REFERENCE
"12.12.3.4.2.b)"
::= { mstpGen 2 }
mstpGenCfgIdRevLevel OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the MST revision that
identifies the MST region and is used as one
of the inputs in the computation of the MST
configuration Identifier."
REFERENCE
"12.12.3.4.2.c)"
::= { mstpGen 3 }
mstpGenCfgIdCfgDigest OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Configuration Digest."
REFERENCE
"12.12.3.3.3.a.4"
::= { mstpGen 4 }
mstpGenHelloTime OBJECT-TYPE
SYNTAX Timeout (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mstpGen 5 }
mstpGenMaxAge OBJECT-TYPE
SYNTAX Timeout (6..40)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mstpGen 6 }
mstpGenForwardDelay OBJECT-TYPE
SYNTAX Timeout (4..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= {mstpGen 7}
mstpGenMaxHops OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS mandatory
DESCRIPTION
"13.22.f)"
::= { mstpGen 8 }
mstpGenCistRootPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpGen 9 }
mstpGenCistRootBrid OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpGen 10 }
-- MSTP MAP TABLE
mstMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains one entry for each instance of MSTP."
::= { mstp 20 }
mstMapEntry OBJECT-TYPE
SYNTAX MstMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A conceptual row containing the status of the MSTP instance."
INDEX { mstMapIndex }
::= { mstMapTable 1 }
MstMapEntry ::= SEQUENCE {
mstMapIndex MstiOrCistInstanceIndex,
mstMapVlans1k OCTET STRING,
mstMapVlans2k OCTET STRING,
mstMapVlans3k OCTET STRING,
mstMapVlans4k OCTET STRING,
mstMapRowStatus RowStatus
}
mstMapIndex OBJECT-TYPE
SYNTAX MstiOrCistInstanceIndex
MAX-ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Uniquely identifies an instance. The entry of this table with index 0
presents always, represents CIST. When SET operation "
::= { mstMapEntry 1 }
mstMapVlans1k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory."
::= { mstMapEntry 2 }
mstMapVlans2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory."
::= { mstMapEntry 3 }
mstMapVlans3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory."
::= { mstMapEntry 4 }
mstMapVlans4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory."
::= { mstMapEntry 5 }
mstMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { mstMapEntry 6 }
-- MSTP Vlan Table, map vlan to msti
mstVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains one entry for each VlanId."
::= { mstp 30 }
mstVlanEntry OBJECT-TYPE
SYNTAX MstVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information regarding the instance to which each Vlan is mapped."
INDEX { mstVlanIndex }
::= { mstVlanTable 1 }
MstVlanEntry ::= SEQUENCE {
mstVlanIndex INTEGER,
mstVlanMstIndex MstiOrCistInstanceIndex
}
mstVlanIndex OBJECT-TYPE
SYNTAX INTEGER(1..4094)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The VlanId for which this entry contains the instance mapped."
::= { mstVlanEntry 1 }
mstVlanMstIndex OBJECT-TYPE
SYNTAX MstiOrCistInstanceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An integer with values ranging from 0 to 64 that identify a
the CIST/MSTI instance to which this VLAN is mapped"
::= { mstVlanEntry 2 }
-- MSTP Port Table, information for all instance of a port
mstpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains generic information about
every port that is associated with this bridge."
::= { mstp 40 }
mstpPortEntry OBJECT-TYPE
SYNTAX MstpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information for each port of the
bridge."
INDEX { mstpPortIndex }
::= { mstpPortTable 1 }
MstpPortEntry ::= SEQUENCE {
mstpPortIndex INTEGER,
mstpPortOperEdgePort TruthValue,
mstpPortOperPointToPointMAC TruthValue
}
mstpPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique value, greater than zero, for each Port.
The value for each interface sub-layer
must remain constant at least from one re-initialization
of the entity's network management system to the next re-
initialization."
::= { mstpPortEntry 1 }
mstpPortOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
REFERENCE ""
::= { mstpPortEntry 2 }
mstpPortOperPointToPointMAC OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
REFERENCE ""
::= {mstpPortEntry 3}
-- MSTP Xst Table, Cist/Mst status/setting
mstpXstTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstpXstEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"."
::= { mstp 50 }
mstpXstEntry OBJECT-TYPE
SYNTAX MstpXstEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"."
INDEX { mstpXstId }
::= { mstpXstTable 1 }
MstpXstEntry ::= SEQUENCE {
mstpXstId MstiOrCistInstanceIndex,
mstpXstBridgePriority Integer32,
mstpXstBridgeId BridgeId,
mstpXstInternalRootCost Integer32,
mstpXstRootPort INTEGER,
mstpXstTimeSinceTopologyChange TimeTicks,
mstpXstTopologyChangesCount Counter32
}
mstpXstId OBJECT-TYPE
SYNTAX MstiOrCistInstanceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"0 means CIST."
::= { mstpXstEntry 1 }
mstpXstBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bridge priority, in steps of 4096."
DEFVAL { 32768 }
::= { mstpXstEntry 2 }
mstpXstBridgeId OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstEntry 3 }
mstpXstInternalRootCost OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstEntry 4 }
mstpXstRootPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstEntry 5 }
mstpXstTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstEntry 6 }
mstpXstTopologyChangesCount OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstEntry 7 }
-- MSTP Xst Port Table, Cist/Mst Port status/setting
mstpXstPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstpXstPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"."
::= { mstp 60 }
mstpXstPortEntry OBJECT-TYPE
SYNTAX MstpXstPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"."
REFERENCE
"."
INDEX { mstpXstPortXstId, mstpXstPortIndex }
::= { mstpXstPortTable 1 }
MstpXstPortEntry ::=
SEQUENCE {
mstpXstPortXstId MstiOrCistInstanceIndex,
mstpXstPortIndex INTEGER,
mstpXstPortEnable EnabledStatus,
mstpXstPortPriority Integer32,
mstpXstPortPathCost INTEGER,
mstpXstPortState INTEGER,
mstpXstPortDesignatedRoot BridgeId,
mstpXstPortDesignatedCost Integer32,
mstpXstPortDesignatedBridge BridgeId,
mstpXstPortDesignatedPort INTEGER
}
mstpXstPortXstId OBJECT-TYPE
SYNTAX MstiOrCistInstanceIndex
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"0 means CIST."
::= { mstpXstPortEntry 1 }
mstpXstPortIndex OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of mstpPortIndex of the Port
in mstpPortTable."
::= { mstpXstPortEntry 2 }
mstpXstPortEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstPortEntry 3 }
mstpXstPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port priority, in steps of 16."
DEFVAL { 128 }
::= { mstpXstPortEntry 4 }
mstpXstPortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstPortEntry 5 }
mstpXstPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
discarding(1),
learning(2),
forwarding(3),
unknown(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstPortEntry 6 }
mstpXstPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstPortEntry 7 }
mstpXstPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstPortEntry 8 }
mstpXstPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstPortEntry 9 }
mstpXstPortDesignatedPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { mstpXstPortEntry 10 }
--MSTP Traps
mstpNotifications OBJECT IDENTIFIER ::= { mstp 70 }
newRoot NOTIFICATION-TYPE
OBJECTS {
mstpXstId
}
STATUS current
DESCRIPTION
""
::= { mstpNotifications 1 }
topologyChange NOTIFICATION-TYPE
OBJECTS {
mstpXstId
}
STATUS current
DESCRIPTION
""
::= { mstpNotifications 2 }
-- radiusServerSetup
radiusServerSetup OBJECT IDENTIFIER ::= { ves1616pe54 57 }
radiusAuthServerSetup OBJECT IDENTIFIER ::= { radiusServerSetup 1 }
radiusAuthServerMode OBJECT-TYPE
SYNTAX INTEGER{
index-priority(1),
round-robin(2),
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { radiusAuthServerSetup 1 }
radiusAuthServerTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { radiusAuthServerSetup 2 }
-- radiusAuthServerTable
radiusAuthServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusAuthServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { radiusAuthServerSetup 3 }
radiusAuthServerEntry OBJECT-TYPE
SYNTAX RadiusAuthServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in radiusAuthServerTable."
INDEX { radiusAuthServerIndex }
::= { radiusAuthServerTable 1 }
RadiusAuthServerEntry ::=
SEQUENCE {
radiusAuthServerIndex INTEGER,
radiusAuthServerIpAddr IpAddress,
radiusAuthServerUdpPort INTEGER,
radiusAuthServerSharedSecret DisplayString,
radiusAuthServerIpAddressType InetAddressType,
radiusAuthServerIpAddress InetAddress
}
radiusAuthServerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { radiusAuthServerEntry 1 }
radiusAuthServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPv4 only"
::= { radiusAuthServerEntry 2 }
radiusAuthServerUdpPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { radiusAuthServerEntry 3 }
radiusAuthServerSharedSecret OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { radiusAuthServerEntry 4 }
radiusAuthServerIpAddressType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { radiusAuthServerEntry 5 }
radiusAuthServerIpAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { radiusAuthServerEntry 6 }
radiusAcctServerSetup OBJECT IDENTIFIER ::= { radiusServerSetup 2 }
radiusAcctServerTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { radiusAcctServerSetup 1 }
-- radiusAcctServerTable
radiusAcctServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusAcctServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { radiusAcctServerSetup 2 }
radiusAcctServerEntry OBJECT-TYPE
SYNTAX RadiusAcctServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in radiusAcctServerTable."
INDEX { radiusAcctServerIndex }
::= { radiusAcctServerTable 1 }
RadiusAcctServerEntry ::=
SEQUENCE {
radiusAcctServerIndex INTEGER,
radiusAcctServerIpAddr IpAddress,
radiusAcctServerUdpPort INTEGER,
radiusAcctServerSharedSecret DisplayString,
radiusAcctServerIpAddressType InetAddressType,
radiusAcctServerIpAddress InetAddress
}
radiusAcctServerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { radiusAcctServerEntry 1 }
radiusAcctServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPv4 only"
::= { radiusAcctServerEntry 2 }
radiusAcctServerUdpPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { radiusAcctServerEntry 3 }
radiusAcctServerSharedSecret OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { radiusAcctServerEntry 4 }
radiusAcctServerIpAddressType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { radiusAcctServerEntry 5 }
radiusAcctServerIpAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { radiusAcctServerEntry 6 }
-- tacacsServerSetup
tacacsServerSetup OBJECT IDENTIFIER ::= { ves1616pe54 58 }
tacacsAuthServerSetup OBJECT IDENTIFIER ::= { tacacsServerSetup 1 }
tacacsAuthServerMode OBJECT-TYPE
SYNTAX INTEGER{
index-priority(1),
round-robin(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { tacacsAuthServerSetup 1 }
tacacsAuthServerTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { tacacsAuthServerSetup 2 }
-- tacacsAuthServerTable
tacacsAuthServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TacacsAuthServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { tacacsAuthServerSetup 3 }
tacacsAuthServerEntry OBJECT-TYPE
SYNTAX TacacsAuthServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in tacacsAuthServerTable."
INDEX { tacacsAuthServerIndex }
::= { tacacsAuthServerTable 1 }
TacacsAuthServerEntry ::=
SEQUENCE {
tacacsAuthServerIndex INTEGER,
tacacsAuthServerIpAddr IpAddress,
tacacsAuthServerTcpPort INTEGER,
tacacsAuthServerSharedSecret DisplayString,
tacacsAuthServerIpAddressType InetAddressType,
tacacsAuthServerIpAddress InetAddress
}
tacacsAuthServerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { tacacsAuthServerEntry 1 }
tacacsAuthServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPv4 only"
::= { tacacsAuthServerEntry 2 }
tacacsAuthServerTcpPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { tacacsAuthServerEntry 3 }
tacacsAuthServerSharedSecret OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { tacacsAuthServerEntry 4 }
tacacsAuthServerIpAddressType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { tacacsAuthServerEntry 5 }
tacacsAuthServerIpAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { tacacsAuthServerEntry 6 }
tacacsAcctServerSetup OBJECT IDENTIFIER ::= { tacacsServerSetup 2 }
tacacsAcctServerTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { tacacsAcctServerSetup 1 }
-- tacacsAcctServerTable
tacacsAcctServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TacacsAcctServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { tacacsAcctServerSetup 2 }
tacacsAcctServerEntry OBJECT-TYPE
SYNTAX TacacsAcctServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in tacacsAcctServerTable."
INDEX { tacacsAcctServerIndex }
::= { tacacsAcctServerTable 1 }
TacacsAcctServerEntry ::=
SEQUENCE {
tacacsAcctServerIndex INTEGER,
tacacsAcctServerIpAddr IpAddress,
tacacsAcctServerTcpPort INTEGER,
tacacsAcctServerSharedSecret DisplayString,
tacacsAcctServerIpAddressType InetAddressType,
tacacsAcctServerIpAddress InetAddress
}
tacacsAcctServerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { tacacsAcctServerEntry 1 }
tacacsAcctServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPv4 only"
::= { tacacsAcctServerEntry 2 }
tacacsAcctServerTcpPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { tacacsAcctServerEntry 3 }
tacacsAcctServerSharedSecret OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { tacacsAcctServerEntry 4 }
tacacsAcctServerIpAddressType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { tacacsAcctServerEntry 5 }
tacacsAcctServerIpAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { tacacsAcctServerEntry 6 }
-- aaaSetup
aaaSetup OBJECT IDENTIFIER ::= { ves1616pe54 59 }
authenticationSetup OBJECT IDENTIFIER ::= { aaaSetup 1 }
-- authenticationTypeTable
authenticationTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthenticationTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { authenticationSetup 1 }
authenticationTypeEntry OBJECT-TYPE
SYNTAX AuthenticationTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in authenticationTypeTable."
INDEX { authenticationTypeName }
::= { authenticationTypeTable 1 }
AuthenticationTypeEntry ::=
SEQUENCE {
authenticationTypeName DisplayString,
authenticationTypeMethodList OCTET STRING
}
authenticationTypeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { authenticationTypeEntry 1 }
authenticationTypeMethodList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable-local: 1, Login-local: 2, radius: 3, tacacs+: 4"
::= { authenticationTypeEntry 2 }
-- VDSL2Extensions
vdsl2Ext OBJECT IDENTIFIER ::= { ves1616pe54 60 }
------------------------------------------------
xdsl2ExtNotifications OBJECT IDENTIFIER ::= { vdsl2Ext 0 }
xdsl2ExtLine OBJECT IDENTIFIER ::= { vdsl2Ext 1 }
xdsl2ExtStatus OBJECT IDENTIFIER ::= { vdsl2Ext 2 }
--xdsl2ExtInventory OBJECT IDENTIFIER ::= { vdsl2Ext 3 }
xdsl2ExtPM OBJECT IDENTIFIER ::= { vdsl2Ext 4 }
xdsl2ExtProfile OBJECT IDENTIFIER ::= { vdsl2Ext 5 }
--xdsl2ExtScalar OBJECT IDENTIFIER ::= { vdsl2Ext 6 }
--xdsl2ExtConformance OBJECT IDENTIFIER ::= { vdsl2Ext 7 }
------------------------------------------------
xdsl2ExtPMLine OBJECT IDENTIFIER ::= { xdsl2ExtPM 1 }
xdsl2ExtPMChannel OBJECT IDENTIFIER ::= { xdsl2ExtPM 2 }
------------------------------------------------
xdsl2ExtProfileLine OBJECT IDENTIFIER ::= { xdsl2ExtProfile 1 }
xdsl2ExtProfileChannel OBJECT IDENTIFIER ::= { xdsl2ExtProfile 2 }
xdsl2ExtProfileAlarmConf OBJECT IDENTIFIER ::= { xdsl2ExtProfile 3 }
------------------------------------------------
--xdsl2ExtScalarSC OBJECT IDENTIFIER ::= { xdsl2Scalar 1 }
------------------------------------------------
------------------------------------------------
-- xdsl2ExtLineTable --
------------------------------------------------
xdsl2ExtLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineTable extends xdsl2LineTable for ZyXEL product."
::= { xdsl2ExtLine 1 }
xdsl2ExtLineEntry OBJECT-TYPE
SYNTAX Xdsl2ExtLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineTable contains extra functions besides those in
xdsl2LineTable."
INDEX { ifIndex }
::= { xdsl2ExtLineTable 1 }
Xdsl2ExtLineEntry ::=
SEQUENCE {
xdsl2LineCmndConfSelt Xdsl2LineLdsf
}
xdsl2LineCmndConfSelt OBJECT-TYPE
SYNTAX Xdsl2LineLdsf
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trigger a SELT(Single End Loop Test) for the line. Note the loop
should be open."
DEFVAL { inhibit }
::= { xdsl2ExtLineEntry 1 }
------------------------------------------------
-- xdsl2ExtLineBandTable --
------------------------------------------------
xdsl2ExtLineBandTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtLineBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineBandTable extends xdsl2LineBandTable for
ZyXEL product."
::= { xdsl2ExtLine 2 }
xdsl2ExtLineBandEntry OBJECT-TYPE
SYNTAX Xdsl2ExtLineBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineBandTable contains extra per-band line
status parameters besides those in xdsl2LineBandTable."
INDEX { ifIndex, xdsl2LineBand }
::= { xdsl2ExtLineBandTable 1 }
Xdsl2ExtLineBandEntry ::=
SEQUENCE {
xdsl2LineBandStatusActAtp Integer32,
xdsl2LineBandStatusActRxPwr Integer32
}
xdsl2LineBandStatusActAtp OBJECT-TYPE
SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Aggregate Transmit Power per band.
A value of 0x7FFFFFFF (2147483647) indicates the measurement is
out of range to be represented."
DEFVAL { 2147483646 }
::= { xdsl2ExtLineBandEntry 1 }
xdsl2LineBandStatusActRxPwr OBJECT-TYPE
SYNTAX Integer32 (-255..255 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Aggregate Receive Power per band.
A value of 0x7FFFFFFF (2147483647) indicates the measurement is
out of range to be represented."
DEFVAL { 2147483646 }
::= { xdsl2ExtLineBandEntry 2 }
------------------------------------------------
-- xdsl2ExtLineSegmentTable --
------------------------------------------------
xdsl2ExtLineSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtLineSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineSegmentTable extends xdsl2LineSegmentTable for
ZyXEL product."
::= { xdsl2ExtStatus 1 }
xdsl2ExtLineSegmentEntry OBJECT-TYPE
SYNTAX Xdsl2ExtLineSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2LineExtSegmentEntry contains extra line segment
status parameters besides those in xdsl2LineSegmentTable.
This table stores HLOG/QLN/SNR measured during initialization."
INDEX { ifIndex,
xdsl2LineSegmentDirection,
xdsl2LineSegment }
::= { xdsl2ExtLineSegmentTable 1 }
Xdsl2ExtLineSegmentEntry ::=
SEQUENCE {
xdsl2LineSegmentLog OCTET STRING,
xdsl2LineSegmentQln OCTET STRING,
xdsl2LineSegmentSnr OCTET STRING,
xdsl2LineSegmentStatus BITS,
xdsl2LineSegmentLogScGroupSize Unsigned32,
xdsl2LineSegmentQlnScGroupSize Unsigned32,
xdsl2LineSegmentSnrScGroupSize Unsigned32
}
xdsl2LineSegmentLog OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter is applicable in initialization and use the same
format as xdsl2SCStatusSegmentLog."
::= { xdsl2ExtLineSegmentEntry 1 }
xdsl2LineSegmentQln OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
UNITS "dBm/Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter is applicable in initialization and use the same
format as xdsl2SCStatusSegmentQln."
::= { xdsl2ExtLineSegmentEntry 2 }
xdsl2LineSegmentSnr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
UNITS "0.5 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter is applicable in initialization and use the same
format as xdsl2SCStatusSegmentSnr."
::= { xdsl2ExtLineSegmentEntry 3 }
xdsl2LineSegmentStatus OBJECT-TYPE
SYNTAX BITS {
hlogReady(0),
qlnReady(1),
snrReady(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates whether the Hlog/Qln/Snr data is ready."
::= { xdsl2ExtLineSegmentEntry 4 }
xdsl2LineSegmentLogScGroupSize OBJECT-TYPE
SYNTAX Unsigned32(1 | 2 | 4 | 8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of subcarriers per group used to report the H(f)
logarithmic representation values for the respective
transmission direction. The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
equal to the size of a subcarrier group used to compute these
parameters."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.5 (HLOGGds)
and paragraph #7.5.1.26.11 (HLOGGus)"
::= { xdsl2ExtLineSegmentEntry 5 }
xdsl2LineSegmentQlnScGroupSize OBJECT-TYPE
SYNTAX Unsigned32(1 | 2 | 4 | 8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of subcarriers per group used to report the Quiet
Line Noise values for the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
equal to the size of a subcarrier group used to compute these
parameters."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.2 (QLNGds)
and paragraph #7.5.1.27.5 (QLNGus)"
::= { xdsl2ExtLineSegmentEntry 6 }
xdsl2LineSegmentSnrScGroupSize OBJECT-TYPE
SYNTAX Unsigned32(1 | 2 | 4 | 8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of subcarriers per group used to report the SNR values
on the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
equal to the size of a subcarrier group used to compute these
parameters."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.2 (SNRGds)
and paragraph #7.5.1.28.5 (SNRGus)"
::= { xdsl2ExtLineSegmentEntry 7 }
------------------------------------------------
-- xdsl2ExtSCStatusTable --
------------------------------------------------
xdsl2ExtSCStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtSCStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtSCStatusTable extends xdsl2SCStatusTable for
ZyXEL product."
::= { xdsl2ExtStatus 3 }
xdsl2ExtSCStatusEntry OBJECT-TYPE
SYNTAX Xdsl2ExtSCStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtSCStatusTable contains extra subcarrier
status parameters besides those in xdsl2LineSegmentTable."
INDEX { ifIndex, xdsl2SCStatusDirection }
::= { xdsl2ExtSCStatusTable 1 }
Xdsl2ExtSCStatusEntry ::=
SEQUENCE {
xdsl2SCStatusActAtp Integer32
}
xdsl2SCStatusActAtp OBJECT-TYPE
SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Aggregate Transmit Power Downstream.
The total amount of transmit power delivered by the xTU-C at
the U-C reference point, at the instant of measurement. It
ranges from -310 to 310 units of 0.1 dBm (Physical values are -31
to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement is
out of range to be represented.
This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once the DELT
process is over, the parameter no longer changes until the row is
deleted or a new DELT process is initiated.
"
DEFVAL { 2147483647 }
::= { xdsl2ExtSCStatusEntry 1 }
------------------------------------------------
-- xdsl2ExtSCStatusBandTable --
------------------------------------------------
xdsl2ExtSCStatusBandTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtSCStatusBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtSCStatusBandTable extends xdsl2SCStatusBandTable for
ZyXEL product."
::= { xdsl2ExtStatus 4 }
xdsl2ExtSCStatusBandEntry OBJECT-TYPE
SYNTAX Xdsl2ExtSCStatusBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtSCStatusBandTable contains extra subcarrier
status parameters that are grouped per-band besides those in
xdsl2SCStatusBandTable."
INDEX { ifIndex, xdsl2SCStatusBand }
::= { xdsl2ExtSCStatusBandTable 1 }
Xdsl2ExtSCStatusBandEntry ::=
SEQUENCE {
xdsl2SCStatusBandSnrMargin Integer32
}
xdsl2SCStatusBandSnrMargin OBJECT-TYPE
SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR Margin is the maximum increase in dB of the noise power
received at the xTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such that the
BER requirements are met for all bearer channels received at the
xTU. Values range from -640 to 630 in units of 0.1 dB (Physical
values are -64 to 63 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the SNR
Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the SNR
Margin measurement is currently unavailable.
This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once the DELT
process is over, the parameter no longer changes until the row is
deleted or a new DELT process is initiated."
DEFVAL { 2147483646 }
::= { xdsl2ExtSCStatusBandEntry 1 }
------------------------------------------------
-- xdsl2ExtSeltStatusTable --
------------------------------------------------
xdsl2ExtSeltStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtSeltStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtSeltStatusTable contains SELT status."
::= { xdsl2ExtStatus 6 }
xdsl2ExtSeltStatusEntry OBJECT-TYPE
SYNTAX Xdsl2ExtSeltStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtSeltStatusEntry contains SELT status."
INDEX { ifIndex }
::= { xdsl2ExtSeltStatusTable 1 }
Xdsl2ExtSeltStatusEntry ::=
SEQUENCE {
xdsl2SeltStatus Integer32,
xdsl2SeltStatusLineType DisplayString,
xdsl2SeltStatusLineLength Integer32
}
xdsl2SeltStatus OBJECT-TYPE
SYNTAX Integer32 {
idle(0),
inProgress(1),
failed(2),
done(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { xdsl2ExtSeltStatusEntry 1 }
xdsl2SeltStatusLineType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { xdsl2ExtSeltStatusEntry 2 }
xdsl2SeltStatusLineLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { xdsl2ExtSeltStatusEntry 3 }
xdsl2ExtSeltReflectionStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtSeltReflectionStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtSeltReflectionStatusTable contains SELT status
for each reflection."
::= { xdsl2ExtStatus 7 }
xdsl2ExtSeltReflectionStatusEntry OBJECT-TYPE
SYNTAX Xdsl2ExtSeltReflectionStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtSeltReflectionStatusTable contains SELT status
for each reflection."
INDEX { ifIndex, xdsl2SeltReflection }
::= { xdsl2ExtSeltReflectionStatusTable 1 }
Xdsl2ExtSeltReflectionStatusEntry ::=
SEQUENCE {
xdsl2SeltReflection Unsigned32,
xdsl2SeltDelay Integer32,
xdsl2SeltError Integer32,
xdsl2SeltAtn180kHz Integer32,
xdsl2SeltAtn300kHz Integer32,
xdsl2SeltFitError Integer32,
xdsl2SeltFitTermination Integer32
}
xdsl2SeltReflection OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { xdsl2ExtSeltReflectionStatusEntry 1 }
xdsl2SeltDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { xdsl2ExtSeltReflectionStatusEntry 2 }
xdsl2SeltError OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { xdsl2ExtSeltReflectionStatusEntry 3 }
xdsl2SeltAtn180kHz OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { xdsl2ExtSeltReflectionStatusEntry 4 }
xdsl2SeltAtn300kHz OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { xdsl2ExtSeltReflectionStatusEntry 5 }
xdsl2SeltFitError OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { xdsl2ExtSeltReflectionStatusEntry 6 }
xdsl2SeltFitTermination OBJECT-TYPE
SYNTAX Integer32
UNITS "0.2"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { xdsl2ExtSeltReflectionStatusEntry 7 }
------------------------------------------------
-- Extended PM line current counters --
------------------------------------------------
xdsl2ExtPMLineCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtPMLineCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable."
::= { xdsl2ExtPMLine 1 }
xdsl2ExtPMLineCurrEntry OBJECT-TYPE
SYNTAX Xdsl2ExtPMLineCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable."
INDEX { ifIndex, xdsl2PMLCurrUnit }
::= { xdsl2ExtPMLineCurrTable 1 }
Xdsl2ExtPMLineCurrEntry ::=
SEQUENCE {
xdsl2PMLSinceLinkFecs Counter32,
xdsl2PMLSinceLinkEs Counter32,
xdsl2PMLSinceLinkSes Counter32,
xdsl2PMLSinceLinkLoss Counter32,
xdsl2PMLSinceLinkUas Counter32,
xdsl2PMLSinceLinkLofs Counter32,
xdsl2PMLSinceLinkLol Counter32,
xdsl2PMLSinceLinkLols Counter32,
xdsl2PMLSinceLinkLpr Counter32,
xdsl2PMLSinceLinkLprs Counter32,
xdsl2PMLCurr15MLofs Counter32,
xdsl2PMLCurr15MLol Counter32,
xdsl2PMLCurr15MLols Counter32,
xdsl2PMLCurr15MLpr Counter32,
xdsl2PMLCurr15MLprs Counter32,
xdsl2PMLCurr1DayLofs Counter32,
xdsl2PMLCurr1DayLol Counter32,
xdsl2PMLCurr1DayLols Counter32,
xdsl2PMLCurr1DayLpr Counter32,
xdsl2PMLCurr1DayLprs Counter32,
xdsl2PMLSinceLinkInmEqInp Counter32,
xdsl2PMLSinceLinkInmIAT Counter32,
xdsl2PMLSinceLinkInmME Counter32,
xdsl2PMLCurr15MInmEqInp Counter32,
xdsl2PMLCurr15MInmIAT Counter32,
xdsl2PMLCurr15MInmME Counter32,
xdsl2PMLCurr1DayInmEqInp Counter32,
xdsl2PMLCurr1DayInmIAT Counter32,
xdsl2PMLCurr1DayInmME Counter32
}
xdsl2PMLSinceLinkFecs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since last link up that there was at
least one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES."
::= { xdsl2ExtPMLineCurrEntry 1 }
xdsl2PMLSinceLinkEs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since last link up that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >=1 OR LPR >= 1
xTU-R: FEBE >= 1 for one or more bearer channels OR
LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 .
This parameter is inhibited during UAS."
::= { xdsl2ExtPMLineCurrEntry 2 }
xdsl2PMLSinceLinkSes OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since last link up that that there was:
xTU-C: (CRC-8 anomalies in one or more of the
received bearer channels) >= 18 OR LOS >= 1
OR SEF >= 1 OR LPR >= 1
xTU-R: (FEBE anomalies in one or more of the
received bearer channels) >= 18 OR LOS-FE >= 1
OR RDI >= 1 OR LPR-FE >= 1 .
This parameter is inhibited during UAS."
::= { xdsl2ExtPMLineCurrEntry 3 }
xdsl2PMLSinceLinkLoss OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since last link up that there was LOS (or
LOS-FE for xTU-R)."
::= { xdsl2ExtPMLineCurrEntry 4 }
xdsl2PMLSinceLinkUas OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in Unavailability State since last line up.
Unavailability begins at the onset of 10 contiguous
severely-errored seconds, and ends at the onset of 10 contiguous
seconds with no severely-errored seconds."
::= { xdsl2ExtPMLineCurrEntry 5 }
xdsl2PMLSinceLinkLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since last link up that there was LOF."
::= { xdsl2ExtPMLineCurrEntry 6 }
xdsl2PMLSinceLinkLol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of times the line loss of link since last link up."
::= { xdsl2ExtPMLineCurrEntry 7 }
xdsl2PMLSinceLinkLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since last link up that there
was Loss of Link ."
::= { xdsl2ExtPMLineCurrEntry 8 }
xdsl2PMLSinceLinkLpr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the line loss of power since last link up."
::= { xdsl2ExtPMLineCurrEntry 9 }
xdsl2PMLSinceLinkLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since last link up that there
was Loss of Power ."
::= { xdsl2ExtPMLineCurrEntry 10 }
xdsl2PMLCurr15MLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF."
::= { xdsl2ExtPMLineCurrEntry 11 }
xdsl2PMLCurr15MLol OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of times during this interval that the line Loss of Link."
::= { xdsl2ExtPMLineCurrEntry 12 }
xdsl2PMLCurr15MLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was Loss of Link."
::= { xdsl2ExtPMLineCurrEntry 13 }
xdsl2PMLCurr15MLpr OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of times during this interval that the line Loss of Power."
::= { xdsl2ExtPMLineCurrEntry 14 }
xdsl2PMLCurr15MLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was Loss of Power."
::= { xdsl2ExtPMLineCurrEntry 15 }
xdsl2PMLCurr1DayLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF."
::= { xdsl2ExtPMLineCurrEntry 16 }
xdsl2PMLCurr1DayLol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of times during this interval that the line Loss of Link."
::= { xdsl2ExtPMLineCurrEntry 17 }
xdsl2PMLCurr1DayLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was Loss of Link."
::= { xdsl2ExtPMLineCurrEntry 18 }
xdsl2PMLCurr1DayLpr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of times during this interval that the line Loss of Power."
::= { xdsl2ExtPMLineCurrEntry 19 }
xdsl2PMLCurr1DayLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was Loss of Power."
::= { xdsl2ExtPMLineCurrEntry 20 }
xdsl2PMLSinceLinkInmEqInp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM Equivalent Inp histogram since last link up. An
array of 68 octets (each 4 octets means amount of a bin of
histogram), designed for supporting from 1 to 17 bins of
the histogram.
The particular index of the bin incremented by an impulse
noise event is equal to the computed value of equivalent INP,
except the 17th of anomaly INPEQ, which logs all equivalent
INPs greater than 16.
Each bin has a value in the range 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineCurrEntry 21 }
xdsl2PMLSinceLinkInmIAT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM Inter Arrival Time histogram since last link up.
An array of 32 octets (each 4 octets means amount of a bin
of histogram), designed for supporting from 0 to 7 bins of
the histogram.
The index of the particular bin incremented by an complete
impulse noise event is determained from the following
INMControl parameters.
Each bin has a value in the range 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineCurrEntry 22 }
xdsl2PMLSinceLinkInmME OBJECT-TYPE
SYNTAX Counter32
UNITS "symbols"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM total measurement since last link up. This
indication occurs every time a data symbol is processed by
the Impulse Noise Sensor.
The range of the value is from 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineCurrEntry 23 }
xdsl2PMLCurr15MInmEqInp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM Equivalent Inp histogram during this 15min
interval. An array of 68 octets (each 4 octets means amount of
a bin of histogram), designed for supporting from 1 to 17 bins
of the histogram.
The particular index of the bin incremented by an impulse
noise event is equal to the computed value of equivalent INP,
except the 17th of anomaly INPEQ, which logs all equivalent
INPs greater than 16.
Each bin has a value in the range 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineCurrEntry 24 }
xdsl2PMLCurr15MInmIAT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM Inter Arrival Time histogram during this 15min
interval. An array of 32 octets (each 4 octets means amount of
a bin of histogram), designed for supporting from 0 to 7 bins
of the histogram.
The index of the particular bin incremented by an complete
impulse noise event is determained from the following
INMControl parameters.
Each bin has a value in the range 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineCurrEntry 25 }
xdsl2PMLCurr15MInmME OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM total measurement during this 15min interval.
This indication occurs every time a data symbol is processed
by the Impulse Noise Sensor.
The range of the value is from 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineCurrEntry 26 }
xdsl2PMLCurr1DayInmEqInp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM Equivalent Inp histogram during this 1Day interval.
An array of 68 octets (each 4 octets means amount of a bin of
histogram), designed for supporting from 1 to 17 bins of the
histogram.
The particular index of the bin incremented by an impulse
noise event is equal to the computed value of equivalent INP,
except the 17th of anomaly INPEQ, which logs all equivalent
INPs greater than 16.
Each bin has a value in the range 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineCurrEntry 27 }
xdsl2PMLCurr1DayInmIAT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM Inter Arrival Time histogram during this 1Day
interval. An array of 32 octets (each 4 octets means amount of
a bin of histogram), designed for supporting from 0 to 7 bins
of the histogram.
The index of the particular bin incremented by an complete
impulse noise event is determained from the following
INMControl parameters.
Each bin has a value in the range 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineCurrEntry 28 }
xdsl2PMLCurr1DayInmME OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM total measurement during this 1Day interval.
This indication occurs every time a data symbol is processed
by the Impulse Noise Sensor.
The range of the value is from 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineCurrEntry 29 }
-------------------------------------------
-- xdsl2 ext PM line history 15 Minutes --
-------------------------------------------
xdsl2ExtPMLineHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtPMLineHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable."
::= { xdsl2ExtPMLine 3 }
xdsl2ExtPMLineHist15MinEntry OBJECT-TYPE
SYNTAX Xdsl2ExtPMLineHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable."
INDEX { ifIndex,
xdsl2PMLHist15MUnit,
xdsl2PMLHist15MInterval }
::= { xdsl2ExtPMLineHist15MinTable 1 }
Xdsl2ExtPMLineHist15MinEntry ::=
SEQUENCE {
xdsl2PMLHist15MLofs Counter32,
xdsl2PMLHist15MLol Counter32,
xdsl2PMLHist15MLols Counter32,
xdsl2PMLHist15MLpr Counter32,
xdsl2PMLHist15MLprs Counter32,
xdsl2PMLHist15MInmEqInp Counter32,
xdsl2PMLHist15MInmIAT Counter32,
xdsl2PMLHist15MInmME Counter32
}
xdsl2PMLHist15MLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF."
::= { xdsl2ExtPMLineHist15MinEntry 1 }
xdsl2PMLHist15MLol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of times during this interval that the line Loss of Link."
::= { xdsl2ExtPMLineHist15MinEntry 2 }
xdsl2PMLHist15MLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that the line Loss of Link."
::= { xdsl2ExtPMLineHist15MinEntry 3 }
xdsl2PMLHist15MLpr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of times during this interval that the line Loss of Power."
::= { xdsl2ExtPMLineHist15MinEntry 4 }
xdsl2PMLHist15MLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that the line Loss of Power."
::= { xdsl2ExtPMLineHist15MinEntry 5 }
xdsl2PMLHist15MInmEqInp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM Equivalent Inp histogram during 15min interval.
An array of 68 octets (each 4 octets means amount of a bin of
histogram), designed for supporting from 1 to 17 bins of the
histogram.
The particular index of the bin incremented by an impulse
noise event is equal to the computed value of equivalent INP,
except the 17th of anomaly INPEQ, which logs all equivalent
INPs greater than 16.
Each bin has a value in the range 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineHist15MinEntry 6 }
xdsl2PMLHist15MInmIAT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM Inter Arrival Time histogram during 15min
interval. An array of 32 octets (each 4 octets means amount of
a bin of histogram), designed for supporting from 0 to 7 bins
of the histogram.
The index of the particular bin incremented by an complete
impulse noise event is determained from the following
INMControl parameters.
Each bin has a value in the range 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineHist15MinEntry 7 }
xdsl2PMLHist15MInmME OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM total measurement during 15min interval.
This indication occurs every time a data symbol is processed
by the Impulse Noise Sensor.
The range of the value is from 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineHist15MinEntry 8 }
---------------------------------------
-- Extended PM line history 1 Day --
---------------------------------------
xdsl2ExtPMLineHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtPMLineHist1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable."
::= { xdsl2ExtPMLine 4 }
xdsl2ExtPMLineHist1DayEntry OBJECT-TYPE
SYNTAX Xdsl2ExtPMLineHist1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable."
INDEX { ifIndex,
xdsl2PMLHist1DUnit,
xdsl2PMLHist1DInterval }
::= { xdsl2ExtPMLineHist1DayTable 1 }
Xdsl2ExtPMLineHist1DayEntry ::=
SEQUENCE {
xdsl2PMLHist1DLofs Counter32,
xdsl2PMLHist1DLol Counter32,
xdsl2PMLHist1DLols Counter32,
xdsl2PMLHist1DLpr Counter32,
xdsl2PMLHist1DLprs Counter32,
xdsl2PMLHist1DInmEqInp Counter32,
xdsl2PMLHist1DInmIAT Counter32,
xdsl2PMLHist1DInmME Counter32
}
xdsl2PMLHist1DLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF."
::= { xdsl2ExtPMLineHist1DayEntry 1 }
xdsl2PMLHist1DLol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of times during this interval that the line Loss of Link."
::= { xdsl2ExtPMLineHist1DayEntry 2 }
xdsl2PMLHist1DLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that the line Loss of Link."
::= { xdsl2ExtPMLineHist1DayEntry 3 }
xdsl2PMLHist1DLpr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of times during this interval that the line Loss of Power."
::= { xdsl2ExtPMLineHist1DayEntry 4 }
xdsl2PMLHist1DLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that the line Loss of Power."
::= { xdsl2ExtPMLineHist1DayEntry 5 }
xdsl2PMLHist1DInmEqInp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM Equivalent Inp histogram during 1Day interval.
An array of 68 octets (each 4 octets means amount of a bin of
histogram), designed for supporting from 1 to 17 bins of the
histogram.
The particular index of the bin incremented by an impulse
noise event is equal to the computed value of equivalent INP,
except the 17th of anomaly INPEQ, which logs all equivalent
INPs greater than 16.
Each bin has a value in the range 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineHist1DayEntry 6 }
xdsl2PMLHist1DInmIAT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM Inter Arrival Time histogram during 1Day
interval. An array of 32 octets (each 4 octets means amount of
a bin of histogram), designed for supporting from 0 to 7 bins
of the histogram.
The index of the particular bin incremented by an complete
impulse noise event is determained from the following
INMControl parameters.
Each bin has a value in the range 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineHist1DayEntry 7 }
xdsl2PMLHist1DInmME OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The INM total measurement during this 1Day interval.
This indication occurs every time a data symbol is processed
by the Impulse Noise Sensor.
The range of the value is from 0x0 to 0xFFFFFFFF"
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtPMLineHist1DayEntry 8 }
---------------------------------------------------
-- xdsl2 extended PM channel current counters --
---------------------------------------------------
xdsl2ExtPMChCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtPMChCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable."
::= { xdsl2ExtPMChannel 1 }
xdsl2ExtPMChCurrEntry OBJECT-TYPE
SYNTAX Xdsl2ExtPMChCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable."
INDEX { ifIndex, xdsl2PMChCurrUnit }
::= { xdsl2ExtPMChCurrTable 1 }
Xdsl2ExtPMChCurrEntry ::=
SEQUENCE {
xdsl2PMChSinceLinkUncorrectedCWs Unsigned32,
xdsl2PMChCurr15MUncorrectedCWs Unsigned32,
xdsl2PMChCurr1DayUncorrectedCWs Unsigned32,
xdsl2PMChSinceLinkCodingViolations Unsigned32,
xdsl2PMChSinceLinkCorrectedBlocks Unsigned32
}
xdsl2PMChSinceLinkUncorrectedCWs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of codewords that could not be corrected since last link up."
::= { xdsl2ExtPMChCurrEntry 1 }
xdsl2PMChCurr15MUncorrectedCWs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of codewords that could not be corrected since during this interval."
::= { xdsl2ExtPMChCurrEntry 2 }
xdsl2PMChCurr1DayUncorrectedCWs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of codewords that could not be corrected since during this interval."
::= { xdsl2ExtPMChCurrEntry 3 }
xdsl2PMChSinceLinkCodingViolations OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel
since last link up."
::= { xdsl2ExtPMChCurrEntry 4 }
xdsl2PMChSinceLinkCorrectedBlocks OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of FEC (FFEC for xTU-R) anomalies (corrected code words)
occurring in the channel since last link up."
::= { xdsl2ExtPMChCurrEntry 5 }
--------------------------------------------------
-- xdsl2 entended PM channel history 15 Minutes --
--------------------------------------------------
xdsl2ExtPMChHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtPMChHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable."
::= { xdsl2ExtPMChannel 2 }
xdsl2ExtPMChHist15MinEntry OBJECT-TYPE
SYNTAX Xdsl2ExtPMChHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable."
INDEX { ifIndex,
xdsl2PMChHist15MUnit,
xdsl2PMChHist15MInterval }
::= { xdsl2ExtPMChHist15MinTable 1 }
Xdsl2ExtPMChHist15MinEntry ::=
SEQUENCE {
xdsl2PMChHist15MUncorrectedCWs Unsigned32
}
xdsl2PMChHist15MUncorrectedCWs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of codewords that could not be corrected since during this interval."
::= { xdsl2ExtPMChHist15MinEntry 1 }
------------------------------------------
-- PM channel history 1 Day --
------------------------------------------
xdsl2ExtPMChHist1DTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtPMChHist1DEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable."
::= { xdsl2ExtPMChannel 3 }
xdsl2ExtPMChHist1DEntry OBJECT-TYPE
SYNTAX Xdsl2ExtPMChHist1DEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable."
INDEX { ifIndex,
xdsl2PMChHist1DUnit,
xdsl2PMChHist1DInterval }
::= { xdsl2ExtPMChHist1DTable 1 }
Xdsl2ExtPMChHist1DEntry ::=
SEQUENCE {
xdsl2PMChHist1DayUncorrectedCWs Unsigned32
}
xdsl2PMChHist1DayUncorrectedCWs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of codewords that could not be corrected since during this interval."
::= { xdsl2ExtPMChHist1DEntry 1 }
------------------------------------------------
-- xdsl2ExtLineConfTemplateTable --
------------------------------------------------
xdsl2ExtLineConfTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtLineConfTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable."
::= { xdsl2ExtProfileLine 1 }
xdsl2ExtLineConfTemplateEntry OBJECT-TYPE
SYNTAX Xdsl2ExtLineConfTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TThe table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable."
INDEX { xdsl2LConfTempTemplateName }
::= { xdsl2ExtLineConfTemplateTable 1 }
Xdsl2ExtLineConfTemplateEntry ::=
SEQUENCE {
xdsl2LConfTempPortList PortList,
xdsl2LConfTempInmConfProfile SnmpAdminString
}
xdsl2LConfTempPortList OBJECT-TYPE
SYNTAX PortList
ACCESS read-only
STATUS current
DESCRIPTION
"A port list that indicates which ports this template applys for."
REFERENCE ""
::= { xdsl2ExtLineConfTemplateEntry 1 }
xdsl2LConfTempInmConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the
VDSL2/ADSL/ADSL2 and ADSL2+ INM configuration Profile Table,
(xdsl2ExtInmConfProfTable) that applies for this DSL line."
DEFVAL { "DEFVAL" }
::= { xdsl2ExtLineConfTemplateEntry 2 }
------------------------------------------
-- xdsl2ExtLineConfProfTable --
------------------------------------------
xdsl2ExtLineConfProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtLineConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable."
::= { xdsl2ExtProfileLine 2 }
xdsl2ExtLineConfProfEntry OBJECT-TYPE
SYNTAX Xdsl2ExtLineConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable."
INDEX { xdsl2LConfProfProfileName }
::= { xdsl2ExtLineConfProfTable 1 }
Xdsl2ExtLineConfProfEntry ::=
SEQUENCE {
xdsl2LConfProfBitSwapDs Unsigned32,
xdsl2LConfProfBitSwapUs Unsigned32,
xdsl2LConfProfPortList PortList
}
xdsl2LConfProfBitSwapDs OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-write
STATUS current
DESCRIPTION
"This configuration parameter indicates if the use of bitswap is
disabled on downstream direction.
The possible values are:
disable(0),
enable(1)"
::= { xdsl2ExtLineConfProfEntry 1 }
xdsl2LConfProfBitSwapUs OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-write
STATUS current
DESCRIPTION
"This configuration parameter indicates if the use of bitswap is
disabled on upstream direction.
The possible values are:
disable(0),
enable(1)"
::= { xdsl2ExtLineConfProfEntry 2 }
xdsl2LConfProfPortList OBJECT-TYPE
SYNTAX PortList
ACCESS read-only
STATUS current
DESCRIPTION
"A port list that indicates which ports this profile applys for."
REFERENCE ""
::= { xdsl2ExtLineConfProfEntry 3 }
xdsl2MaxNumLineConfTemplate OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of VDSL line template."
::= { xdsl2ExtProfileLine 5 }
xdsl2MaxNumLineConfProfile OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of VDSL line profile."
::= { xdsl2ExtProfileLine 6 }
------------------------------------------
-- xdsl2ExtInmConfProfTable --
------------------------------------------
xdsl2ExtInmConfProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtInmConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"xdsl2ExtInmConfProfTable."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtProfileLine 7 }
xdsl2ExtInmConfProfEntry OBJECT-TYPE
SYNTAX Xdsl2ExtInmConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"xdsl2ExtInmConfProfTable."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
INDEX { xdsl2ExtInmConfProfProfileName }
::= { xdsl2ExtInmConfProfTable 1 }
Xdsl2ExtInmConfProfEntry ::=
SEQUENCE {
xdsl2ExtInmConfProfProfileName SnmpAdminString,
xdsl2ExtInmConfProfVtucInpEq Unsigned32,
xdsl2ExtInmConfProfVturInpEq Unsigned32,
xdsl2ExtInmConfProfVtucCC Unsigned32,
xdsl2ExtInmConfProfVturCC Unsigned32,
xdsl2ExtInmConfProfVtucIATO Unsigned32,
xdsl2ExtInmConfProfVturIATO Unsigned32,
xdsl2ExtInmConfProfVtucIATS Unsigned32,
xdsl2ExtInmConfProfVturIATS Unsigned32,
xdsl2ExtInmConfProfRowStatus RowStatus,
xdsl2ExtInmConfProfPortList PortList
}
xdsl2ExtInmConfProfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
::= { xdsl2ExtInmConfProfEntry 1 }
xdsl2ExtInmConfProfVtucInpEq OBJECT-TYPE
SYNTAX Unsigned32 (0..3)
ACCESS read-write
STATUS current
DESCRIPTION
"The INM Inmpulse Noise Protection Equivalent Mode.
Configuration parameter INM_INPEQ_MODE defines the way of
computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2
11.4.2.2.1
This takes a value in the range from 0 to 3."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
DEFVAL { 0 }
::= { xdsl2ExtInmConfProfEntry 2 }
xdsl2ExtInmConfProfVturInpEq OBJECT-TYPE
SYNTAX Unsigned32 (0..3)
ACCESS read-write
STATUS current
DESCRIPTION
"The INM Inmpulse Noise Protection Equivalent Mode.
Configuration parameter INM_INPEQ_MODE defines the way of
computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2
11.4.2.2.1
This takes a value in the range from 0 to 3."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
DEFVAL { 0 }
::= { xdsl2ExtInmConfProfEntry 3 }
xdsl2ExtInmConfProfVtucCC OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-write
STATUS current
DESCRIPTION
"The INM Cluster Continuation. The valid values for INMCC range
from 0 from 64 DMT symbols in steps of 1 DMT symbol.
Up to and including INMCC nondegraded symbols will be allowed before
a cluster is deemed to be complete and the impulse noise event over."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
DEFVAL { 0 }
::= { xdsl2ExtInmConfProfEntry 4 }
xdsl2ExtInmConfProfVturCC OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-write
STATUS current
DESCRIPTION
"The INM Cluster Continuation. The valid values for INMCC range
from 0 from 64 DMT symbols in steps of 1 DMT symbol.
Up to and including INMCC nondegraded symbols will be allowed before
a cluster is deemed to be complete and the impulse noise event over."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
DEFVAL { 0 }
::= { xdsl2ExtInmConfProfEntry 5 }
xdsl2ExtInmConfProfVtucIATO OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-write
STATUS current
DESCRIPTION
"The INM Inter Arrival Time Offset for the IAT anomaly generation.
The valid values for INMIATO range from 3 from 511 DMT symbols in steps
of 1 DMT symbol."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
DEFVAL { 3 }
::= { xdsl2ExtInmConfProfEntry 6 }
xdsl2ExtInmConfProfVturIATO OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-write
STATUS current
DESCRIPTION
"The INM Inter Arrival Time Offset for the IAT anomaly generation.
The valid values for INMIATO range from 3 from 511 DMT symbols in steps
of 1 DMT symbol."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
DEFVAL { 3 }
::= { xdsl2ExtInmConfProfEntry 7 }
xdsl2ExtInmConfProfVtucIATS OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-write
STATUS current
DESCRIPTION
"The INM Inter Arrival Time Step for the IAT anomaly generation.
The valid values for INMIATS range from 0 from 7 in steps. The range of
values of inter-arrival times recorded in a single bin is 2^(INMIATS).
All inter-arrival times greater than or equal to INMIATO+6*(2^INMIATS)
are recorded in the 7th bin of INMAIAT."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
DEFVAL { 0 }
::= { xdsl2ExtInmConfProfEntry 8 }
xdsl2ExtInmConfProfVturIATS OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-write
STATUS current
DESCRIPTION
"The INM Inter Arrival Time Step for the IAT anomaly generation.
The valid values for INMIATS range from 0 from 7 in steps. The range of
values of inter-arrival times recorded in a single bin is 2^(INMIATS).
All inter-arrival times greater than or equal to INMIATO+6*(2^INMIATS)
are recorded in the 7th bin of INMAIAT."
REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM
procedure)"
DEFVAL { 0 }
::= { xdsl2ExtInmConfProfEntry 9 }
xdsl2ExtInmConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table."
::= { xdsl2ExtInmConfProfEntry 14 }
xdsl2ExtInmConfProfPortList OBJECT-TYPE
SYNTAX PortList
ACCESS read-only
STATUS current
DESCRIPTION
"A port list that indicates which ports this profile applys for."
REFERENCE ""
::= { xdsl2ExtInmConfProfEntry 15 }
xdsl2MaxNumInmConfProfile OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of VDSL Inm profile."
::= { xdsl2ExtProfileLine 8 }
------------------------------------------------
-- xdsl2ExtChConfProfileTable --
------------------------------------------------
xdsl2ExtChConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtChConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable."
::= { xdsl2ExtProfileChannel 1 }
xdsl2ExtChConfProfileEntry OBJECT-TYPE
SYNTAX Xdsl2ExtChConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable."
INDEX { xdsl2ChConfProfProfileName }
::= { xdsl2ExtChConfProfileTable 1 }
Xdsl2ExtChConfProfileEntry ::=
SEQUENCE {
xdsl2ChConfProfPhyRDs Unsigned32,
xdsl2ChConfProfPhyRUs Unsigned32,
xdsl2ChConfProfPortList OCTET STRING
}
xdsl2ChConfProfPhyRDs OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines phy retransmission
mode on downstream direction. If auto mode is selected,
PhyR will be disabled if the net data rate in PhyR mode
will be lower than in non-PhyR mode under current loop
condition and framing paramters.
The possible values are:
disable(0),
enable(1),
auto(2)"
::= { xdsl2ExtChConfProfileEntry 1 }
xdsl2ChConfProfPhyRUs OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines phy retransmission
mode on upstream direction. If auto mode is selected,
PhyR will be disabled if the net data rate in PhyR mode
will be lower than in non-PhyR mode under current loop
condition and framing paramters.
The possible values are:
disable(0),
enable(1),
auto(2)"
::= { xdsl2ExtChConfProfileEntry 2 }
xdsl2ChConfProfPortList OBJECT-TYPE
SYNTAX PortList
ACCESS read-only
STATUS current
DESCRIPTION
"A port list that indicates which ports this profile applys for."
REFERENCE ""
::= { xdsl2ExtChConfProfileEntry 3 }
xdsl2MaxNumChConfProfile OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of VDSL channel profile."
::= { xdsl2ExtProfileChannel 2 }
------------------------------------------------
-- xdsl2ExtLineAlarmConfTemplateTable --
------------------------------------------------
xdsl2ExtLineAlarmConfTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtLineAlarmConfTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineAlarConfTemplateTable extends
xdsl2ExtLineAlarConfTemplateTable."
::= { xdsl2ExtProfileAlarmConf 1 }
xdsl2ExtLineAlarmConfTemplateEntry OBJECT-TYPE
SYNTAX Xdsl2ExtLineAlarmConfTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineAlarConfTemplateTable extends
xdsl2ExtLineAlarConfTemplateTable."
INDEX { xdsl2LAlarmConfTempTemplateName }
::= { xdsl2ExtLineAlarmConfTemplateTable 1 }
Xdsl2ExtLineAlarmConfTemplateEntry ::=
SEQUENCE {
xdsl2LAlarmConfTempPortList PortList
}
xdsl2LAlarmConfTempPortList OBJECT-TYPE
SYNTAX PortList
ACCESS read-only
STATUS current
DESCRIPTION
"A port list that indicates which ports this template applys for."
REFERENCE ""
::= { xdsl2ExtLineAlarmConfTemplateEntry 3 }
------------------------------------------------
-- xdsl2ExtLineAlarmConfProfileTable --
------------------------------------------------
xdsl2ExtLineAlarmConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtLineAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineAlarmConfProfileTable extends
xdsl2LineAlarmConfProfileTable."
::= { xdsl2ExtProfileAlarmConf 2 }
xdsl2ExtLineAlarmConfProfileEntry OBJECT-TYPE
SYNTAX Xdsl2ExtLineAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtLineAlarmConfProfileTable extends
xdsl2LineAlarmConfProfileTable."
INDEX { xdsl2LineAlarmConfProfileName }
::= { xdsl2ExtLineAlarmConfProfileTable 1 }
Xdsl2ExtLineAlarmConfProfileEntry ::=
SEQUENCE {
xdsl2LineAlarmConfProfileXtucThresh15MinLofs HCPerfIntervalThreshold,
xdsl2LineAlarmConfProfileXturThresh15MinLofs HCPerfIntervalThreshold,
xdsl2LAlarmConfProfilePortList PortList,
xdsl2LineAlarmConfProfileXturThresh15MinLprs HCPerfIntervalThreshold
}
xdsl2LineAlarmConfProfileXtucThresh15MinLofs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLofs counter, when
xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { xdsl2ExtLineAlarmConfProfileEntry 1 }
xdsl2LineAlarmConfProfileXturThresh15MinLofs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLofs counter, when
xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { xdsl2ExtLineAlarmConfProfileEntry 2 }
xdsl2LAlarmConfProfilePortList OBJECT-TYPE
SYNTAX PortList
ACCESS read-only
STATUS current
DESCRIPTION
"A port list that indicates which ports this profile applys for."
::= { xdsl2ExtLineAlarmConfProfileEntry 3 }
xdsl2LineAlarmConfProfileXturThresh15MinLprs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLprs counter, when
xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { xdsl2ExtLineAlarmConfProfileEntry 4 }
------------------------------------------------
-- xdsl2ExtChAlarmConfProfileTable --
------------------------------------------------
xdsl2ExtChAlarmConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ExtChAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtChAlarmConfProfileTable extends
xdsl2ExtChAlarmConfProfileTable."
::= { xdsl2ExtProfileAlarmConf 3 }
xdsl2ExtChAlarmConfProfileEntry OBJECT-TYPE
SYNTAX Xdsl2ExtChAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2ExtChAlarmConfProfileTable extends
xdsl2ExtChAlarmConfProfileTable."
INDEX { xdsl2ChAlarmConfProfileName }
::= { xdsl2ExtChAlarmConfProfileTable 1 }
Xdsl2ExtChAlarmConfProfileEntry ::=
SEQUENCE {
xdsl2ChAlarmConfProfilePortList PortList
}
xdsl2ChAlarmConfProfilePortList OBJECT-TYPE
SYNTAX PortList
ACCESS read-only
STATUS current
DESCRIPTION
"A port list that indicates which ports this profileapplys for."
::= { xdsl2ExtChAlarmConfProfileEntry 3 }
xdsl2MaxNumLineAlarmConfTemplate OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of VDSL alarm template."
::= { xdsl2ExtProfileAlarmConf 4 }
xdsl2MaxNumLineAlarmConfProfile OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of VDSL line alarm profile."
::= { xdsl2ExtProfileAlarmConf 5 }
xdsl2MaxNumChAlarmConfProfile OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of VDSL channel alarm profile."
::= { xdsl2ExtProfileAlarmConf 6 }
-------------------------------------------
-- Notifications Group --
-------------------------------------------
xdsl2LinePerfLOFSThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MLofs,
xdsl2LineAlarmConfProfileXtucThresh15MinLofs
}
STATUS current
DESCRIPTION
"This notification indicates that the LOF seconds threshold
has been reached/exceeded for the referred xTU-C."
::= { xdsl2ExtNotifications 1 }
xdsl2LinePerfLOFSThreshXtur NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MLofs,
xdsl2LineAlarmConfProfileXturThresh15MinLofs
}
STATUS current
DESCRIPTION
"This notification indicates that the LOF seconds threshold
has been reached/exceeded for the referred xTU-R."
::= { xdsl2ExtNotifications 2 }
xdsl2LinePerfLPRSThreshXtur NOTIFICATION-TYPE
OBJECTS
{
xdsl2PMLCurr15MLprs,
xdsl2LineAlarmConfProfileXturThresh15MinLprs
}
STATUS current
DESCRIPTION
"This notification indicates that the LPR seconds threshold
has been reached/exceeded for the referred xTU-R."
::= { xdsl2ExtNotifications 3 }
-- macBasedVlanSetup
macBasedVlanSetup OBJECT IDENTIFIER ::= { ves1616pe54 61 }
macBasedVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacBasedVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { macBasedVlanSetup 1 }
macBasedVlanEntry OBJECT-TYPE
SYNTAX MacBasedVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in macBasedVlanTable."
INDEX {macBasedVlanMAC }
::= { macBasedVlanTable 1 }
MacBasedVlanEntry ::=
SEQUENCE {
macBasedVlanName DisplayString,
macBasedVlanMAC MacAddress,
macBasedVlanVlanId INTEGER,
macBasedVlan8021pPriority INTEGER,
macBasedVlanRowstatus RowStatus
}
macBasedVlanName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name of Mac-Based Vlan."
::= { macBasedVlanEntry 1 }
macBasedVlanMAC OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Mac address for Mac-Based Vlan"
::= { macBasedVlanEntry 2 }
macBasedVlanVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Vlan id for Mac-Based Vlan, 1~4094."
::= { macBasedVlanEntry 3 }
macBasedVlan8021pPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1p priority for Mac-Based Vlan, 0~7."
::= { macBasedVlanEntry 4 }
macBasedVlanRowstatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Row Status for Mac-Based Vlan"
::= { macBasedVlanEntry 5 }
-- vlanProfileSetup
vlanProfileSetup OBJECT IDENTIFIER ::= { ves1616pe54 62 }
vlanProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanProfileSetup 1 }
vlanProfileEntry OBJECT-TYPE
SYNTAX VlanProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlanProfileTable."
INDEX {vlanProfileName }
::= { vlanProfileTable 1 }
VlanProfileEntry ::=
SEQUENCE {
vlanProfileName DisplayString,
vlanProfileMacLearning INTEGER,
vlanProfileUnknownMulticastDrop INTEGER,
vlanProfileRowStatus RowStatus
}
vlanProfileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of vlan Profile."
::= { vlanProfileEntry 1 }
vlanProfileMacLearning OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Mac learning for vlan profile"
::= { vlanProfileEntry 2 }
vlanProfileUnknownMulticastDrop OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drop unknown multicast packets."
::= { vlanProfileEntry 3 }
vlanProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Row status for vlan profile"
::= { vlanProfileEntry 4 }
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanProfileSetup 2 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlanTable."
INDEX {dot1qVlanIndex }
::= { vlanTable 1 }
VlanEntry ::=
SEQUENCE {
profileName DisplayString
}
profileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name of vlan Profile."
::= { vlanEntry 1 }
-- DoSPreventionSetup
dosPreventionSetup OBJECT IDENTIFIER ::= { ves1616pe54 63 }
dosPreventionActive OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DoS prevention enabled/disabled for the switch."
::= { dosPreventionSetup 1 }
dosPreventionTCPHeaderSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum TCP header size."
::= { dosPreventionSetup 2 }
dosPreventionICMPPacketSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum ICMP packet size."
::= { dosPreventionSetup 3 }
dosPreventionMacChecking OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Checking MAC enabled/disabled for the switch."
::= { dosPreventionSetup 4 }
dosPreventionIPChecking OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Checking IP enabled/disabled for the switch."
::= { dosPreventionSetup 5 }
-- dosPreventionDoSIPAttack OBJECT-TYPE
-- SYNTAX INTEGER{
-- enable(1),
-- disable(0)
-- }
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "DoS IP attack enabled/disabled for the switch."
-- ::= { dosPreventionSetup 6 }
dosPreventionICMPSize OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Checking ICMP packet size enabled/disabled for the switch."
::= { dosPreventionSetup 7 }
-- dosPreventionDoSICMPAttack OBJECT-TYPE
-- SYNTAX INTEGER{
-- enable(1),
-- disable(0)
-- }
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "DoS ICMP attack enabled/disabled for the switch."
-- ::= { dosPreventionSetup 8 }
dosPreventionICMPFragment OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dropping fragmented ICMP packets enabled/disabled for the switch."
::= { dosPreventionSetup 9 }
-- dosPreventionTCPSize OBJECT-TYPE
-- SYNTAX INTEGER{
-- enable(1),
-- disable(0)
-- }
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "Checking TCP header size enabled/disabled for the switch."
-- ::= { dosPreventionSetup 10 }
dosPreventionTCPSYN OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Checking TCP SYN packets enabled/disabled for the switch."
::= { dosPreventionSetup 11 }
-- dosPreventionDoSTCPAttack OBJECT-TYPE
-- SYNTAX INTEGER{
-- enable(1),
-- disable(0)
-- }
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "DoS TCP attack enabled/disabled for the switch."
-- ::= { dosPreventionSetup 12 }
dosPreventionTCPFragment OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dropping fragmented TCP packets with offset value of 1 enabled/disabled for the switch."
::= { dosPreventionSetup 13 }
dosPreventionTCPControlSN OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dropping TCP packets with control flag of 0 and sequence number of 0 enabled/disabled for the switch."
::= { dosPreventionSetup 14 }
dosPreventionTCPPort OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Checking TCP port enabled/disabled for the switch."
::= { dosPreventionSetup 15 }
dosPreventionTCPSF OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Checking TCP packets with SYN and FIN bits enabled/disabled for the switch."
::= { dosPreventionSetup 16 }
dosPreventionTCPFUP OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Checking TCP packets with FIN, URG, PSH bits and sequence number enabled/disabled for the switch."
::= { dosPreventionSetup 17 }
dosPreventionUDPPort OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Checking UDP port enabled/disabled for the switch."
::= { dosPreventionSetup 18 }
-- dosPreventionTCPUDPPort OBJECT-TYPE
-- SYNTAX INTEGER{
-- enable(1),
-- disable(0)
-- }
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "Checking TCP/UDP port enabled/disabled for the switch."
-- ::= { dosPreventionSetup 19 }
-- ipv6Setup
ipv6Setup OBJECT IDENTIFIER ::= { ves1616pe54 65 }
-- dnsIpv6Address OBJECT-TYPE
-- SYNTAX Ipv6Address
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- ""
-- ::= { ipv6Setup 1 }
defaultMgmt OBJECT-TYPE
SYNTAX INTEGER {
in_band(0),
out_of_band(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { ipv6Setup 2 }
inbandIpv6Setup OBJECT IDENTIFIER ::= { ipv6Setup 3 }
-- inbandIpType OBJECT-TYPE
-- SYNTAX INTEGER {
-- dhcp_client(0),
-- static_ip(1)
-- }
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- ""
-- ::= { inbandIpv6Setup 1 }
inbandVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpv6Setup 2 }
inbandStaticIp OBJECT-TYPE
SYNTAX Ipv6Address
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpv6Setup 3 }
inbandStaticSubnetMask OBJECT-TYPE
SYNTAX Ipv6Address
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpv6Setup 4 }
inbandStaticGateway OBJECT-TYPE
SYNTAX Ipv6Address
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpv6Setup 5 }
outOfBandIpv6Setup OBJECT IDENTIFIER ::= { ipv6Setup 4 }
outOfBandIp OBJECT-TYPE
SYNTAX Ipv6Address
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { outOfBandIpv6Setup 1 }
outOfBandSubnetMask OBJECT-TYPE
SYNTAX Ipv6Address
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { outOfBandIpv6Setup 2 }
outOfBandGateway OBJECT-TYPE
SYNTAX Ipv6Address
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { outOfBandIpv6Setup 3 }
---------------------------------------------------
--
-- Layer 2 Protocol Tunneling
--
---------------------------------------------------
l2ptSetup OBJECT IDENTIFIER ::= { ves1616pe54 115 }
-- l2ptState
l2ptState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"L2PT feature enabled/disabled for the switch"
::= { l2ptSetup 1 }
l2ptMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"L2PT destination mac address"
::= { l2ptSetup 2 }
-- l2ptTable
l2ptTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ptEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { l2ptSetup 3 }
l2ptEntry OBJECT-TYPE
SYNTAX L2ptEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in l2ptTable."
INDEX { dot1dBasePort }
::= { l2ptTable 1 }
L2ptEntry ::=
SEQUENCE {
l2ptProtocolGroup BITS,
l2ptPointToPointProtocolGroup BITS,
l2ptMode INTEGER
}
l2ptProtocolGroup OBJECT-TYPE
SYNTAX BITS {
cDP(0),
sTP(1),
vTP(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"L2PT protocols enabled/disabled on the port"
::= { l2ptEntry 1 }
l2ptPointToPointProtocolGroup OBJECT-TYPE
SYNTAX BITS {
pAGP(0),
lACP(1),
uDLD(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"L2PT point-to-point protocols enabled/disabled on the port"
::= { l2ptEntry 2 }
l2ptMode OBJECT-TYPE
SYNTAX INTEGER {
access(1),
tunnel(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"L2PT port role on the port"
::= { l2ptEntry 3 }
---------------------------------------------------
--
-- vlan mapping
--
---------------------------------------------------
-- vlanMappingSetup
vlanMappingSetup OBJECT IDENTIFIER ::= { ves1616pe54 116 }
vlanMappingState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vlanMappingSetup 1 }
-- vlanMappingPortTable
vlanMappingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanMappingPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanMappingSetup 2 }
vlanMappingPortEntry OBJECT-TYPE
SYNTAX VlanMappingPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlanMappingPortTable."
INDEX { dot1dBasePort }
::= { vlanMappingPortTable 1 }
VlanMappingPortEntry ::=
SEQUENCE {
vlanMappingPortState EnabledStatus,
vlanMappingPortDropMiss EnabledStatus
}
vlanMappingPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vlanMappingPortEntry 1 }
vlanMappingPortDropMiss OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { vlanMappingPortEntry 2 }
-- vlanMappingRuleTable
vlanMappingRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanMappingRuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanMappingSetup 3 }
vlanMappingRuleEntry OBJECT-TYPE
SYNTAX VlanMappingRuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlan-mapping rule table"
INDEX { vlanMappingRulePort, vlanMappingRuleVid }
::= { vlanMappingRuleTable 1 }
VlanMappingRuleEntry ::=
SEQUENCE {
vlanMappingRuleName DisplayString,
vlanMappingRulePort INTEGER,
vlanMappingRuleVid INTEGER,
vlanMappingRuleTransVid INTEGER,
vlanMappingRulePriority INTEGER,
vlanMappingRuleRowStatus RowStatus,
vlanMappingRuleReplacePrio EnabledStatus
}
vlanMappingRuleName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of vlan-mapping entry"
::= { vlanMappingRuleEntry 1 }
vlanMappingRulePort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"interface port id"
::= { vlanMappingRuleEntry 2 }
vlanMappingRuleVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"inner vid"
::= { vlanMappingRuleEntry 3 }
vlanMappingRuleTransVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"translated vid"
::= { vlanMappingRuleEntry 4 }
vlanMappingRulePriority OBJECT-TYPE
SYNTAX INTEGER {
prioriry-0(0),
prioriry-1(1),
prioriry-2(2),
prioriry-3(3),
prioriry-4(4),
prioriry-5(5),
prioriry-6(6),
prioriry-7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"priority"
::= { vlanMappingRuleEntry 5 }
vlanMappingRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { vlanMappingRuleEntry 6 }
vlanMappingRuleReplacePrio OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Replace Original Priority"
::= { vlanMappingRuleEntry 7 }
-- transceiverInfoTable
transceiverInfo OBJECT IDENTIFIER ::= { ves1616pe54 117 }
-- transceiverSerialInfoTable
transceiverSerialInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF TransceiverSerialInfoEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { transceiverInfo 1 }
transceiverSerialInfoEntry OBJECT-TYPE
SYNTAX TransceiverSerialInfoEntry
ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in transceiverSerialInfoTable."
INDEX { transceiverSerialInfoEntryPort }
::= { transceiverSerialInfoTable 1 }
TransceiverSerialInfoEntry ::=
SEQUENCE {
transceiverSerialInfoEntryPort INTEGER,
transceiverSerialInfoEntryStatus INTEGER,
transceiverSerialInfoEntryVendor DisplayString,
transceiverSerialInfoEntryPartNo DisplayString,
transceiverSerialInfoEntrySerialNo DisplayString,
transceiverSerialInfoEntryRevision DisplayString,
transceiverSerialInfoEntryDateCode DisplayString,
transceiverSerialInfoEntryTransceiver DisplayString
}
transceiverSerialInfoEntryPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Index of transceiverSerialInfo. It is referred to dot1dBasePort"
::= { transceiverSerialInfoEntry 1 }
transceiverSerialInfoEntryStatus OBJECT-TYPE
SYNTAX INTEGER {
ok_with_DDM(1),
ok_without_DDM(2),
nonoperational(3)
}
ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver module status."
::= { transceiverSerialInfoEntry 2 }
transceiverSerialInfoEntryVendor OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver module vendor name."
::= { transceiverSerialInfoEntry 3 }
transceiverSerialInfoEntryPartNo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"Part number provided by transceiver module vendor."
::= { transceiverSerialInfoEntry 4 }
transceiverSerialInfoEntrySerialNo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"Serial number provided by transceiver module vendor."
::= { transceiverSerialInfoEntry 5 }
transceiverSerialInfoEntryRevision OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"Revision level for part number provided by transceiver module vendor."
::= { transceiverSerialInfoEntry 6 }
transceiverSerialInfoEntryDateCode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver module vendor's manufacturing date code"
::= { transceiverSerialInfoEntry 7 }
transceiverSerialInfoEntryTransceiver OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver module type names"
::= { transceiverSerialInfoEntry 8 }
-- transceiverDdmInfoTable
transceiverDdmInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF TransceiverDdmInfoEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { transceiverInfo 2 }
transceiverDdmInfoEntry OBJECT-TYPE
SYNTAX TransceiverDdmInfoEntry
ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in transceiverDdmInfoTable."
INDEX { transceiverDdmInfoEntryPort, transceiverDdmInfoEntryType }
::= { transceiverDdmInfoTable 1 }
TransceiverDdmInfoEntry ::=
SEQUENCE {
transceiverDdmInfoEntryPort INTEGER,
transceiverDdmInfoEntryType INTEGER,
transceiverDdmInfoEntryAlarmMax INTEGER,
transceiverDdmInfoEntryAlarmMin INTEGER,
transceiverDdmInfoEntryWarnMax INTEGER,
transceiverDdmInfoEntryWarnMin INTEGER,
transceiverDdmInfoEntryCurrent INTEGER,
transceiverDdmInfoEntryDescription DisplayString
}
transceiverDdmInfoEntryPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Index of transceiverDdmInfo. This will be referred to dot1dBasePort"
::= { transceiverDdmInfoEntry 1 }
transceiverDdmInfoEntryType OBJECT-TYPE
SYNTAX INTEGER {
temperature(1),
voltage(2),
bias(3),
txPower(4),
rxPower(5)
}
ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver module status."
::= { transceiverDdmInfoEntry 2 }
transceiverDdmInfoEntryAlarmMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver module vendor name."
::= { transceiverDdmInfoEntry 3 }
transceiverDdmInfoEntryAlarmMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Part number provided by transceiver module vendor."
::= { transceiverDdmInfoEntry 4 }
transceiverDdmInfoEntryWarnMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Serial number provided by transceiver module vendor."
::= { transceiverDdmInfoEntry 5 }
transceiverDdmInfoEntryWarnMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Revision level for part number provided by transceiver module vendor."
::= { transceiverDdmInfoEntry 6 }
transceiverDdmInfoEntryCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver module vendor's manufacturing date code"
::= { transceiverDdmInfoEntry 7 }
transceiverDdmInfoEntryDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver module type names"
::= { transceiverDdmInfoEntry 8 }
------------------------------------------------------
END
View Git Blame Copy Permalink