WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zyxel/ZYXEL-VES1616F35-MIB

6402 lines
198 KiB
Plaintext
Raw Blame History

-- ZyXEL Communications Corporation
-- Private Enterprise MIB definition
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
-- It contains ZyXEL products OIDs, and common managed objects.
ZYXEL-VES1616F35-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises FROM RFC1155-SMI
OBJECT-TYPE
FROM SNMPv2-SMI -- RFC2578
RowStatus, DateAndTime, TruthValue, StorageType, MacAddress
FROM SNMPv2-TC -- RFC2579
DisplayString
FROM RFC1213-MIB
EnabledStatus
FROM P-BRIDGE-MIB
PortList
FROM Q-BRIDGE-MIB
dot1dBasePort
FROM BRIDGE-MIB
InterfaceIndexOrZero -- RFC2863
FROM IF-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC2571
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB -- RFC2851
OperationResponseStatus
FROM DISMAN-PING-MIB
vdslLineConfProfileName
FROM VDSL-LINE-MIB
IpAddress
FROM SNMPv2-SMI
NOTIFICATION-TYPE
FROM SNMPv2-SMI
sysObjectID
FROM RFC1213-MIB;
zyxel OBJECT IDENTIFIER ::= { enterprises 890 }
products OBJECT IDENTIFIER ::= { zyxel 1 }
accessSwitch OBJECT IDENTIFIER ::= { products 5 }
vesSeries OBJECT IDENTIFIER ::= { accessSwitch 12 }
ves1616f35 OBJECT IDENTIFIER ::= { vesSeries 16 }
-- sysInfo
sysInfo OBJECT IDENTIFIER ::= { ves1616f35 1 }
sysSwPlatformMajorVers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SW platform major version, e.g. 3."
::= { sysInfo 1 }
sysSwPlatformMinorVers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SW platform minor version, e.g. 50."
::= { sysInfo 2 }
sysSwModelString OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Model letters, e.g. TJ"
::= { sysInfo 3 }
sysSwVersionControlNbr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Version control number, e.g. 0."
::= { sysInfo 4 }
sysSwDay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SW compilation day, e.g. 19."
::= { sysInfo 5 }
sysSwMonth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SW compilation month, e.g. 8."
::= { sysInfo 6 }
sysSwYear OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SW compilation year, e.g. 2004."
::= { sysInfo 7 }
sysHwMajorVers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HW major version number, e.g. 1."
::= { sysInfo 8 }
sysHwMinorVers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HW minor version number, e.g. 0."
::= { sysInfo 9 }
sysSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Serial number"
::= { sysInfo 10 }
-- rateLimitSetup
rateLimitSetup OBJECT IDENTIFIER ::= { ves1616f35 2 }
rateLimitState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress/egress rate limiting enabled/disabled for the switch."
::= { rateLimitSetup 1 }
-- rateLimitPortTable
rateLimitPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RateLimitPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { rateLimitSetup 2 }
rateLimitPortEntry OBJECT-TYPE
SYNTAX RateLimitPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in rateLimitPortTable."
INDEX { dot1dBasePort }
::= { rateLimitPortTable 1 }
RateLimitPortEntry ::=
SEQUENCE {
rateLimitPortState EnabledStatus,
rateLimitPortPeakRate INTEGER,
rateLimitPortEgrRate INTEGER,
rateLimitPortCommitRate INTEGER
}
rateLimitPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress/egress rate limiting enabled/disabled on the port."
::= { rateLimitPortEntry 1 }
rateLimitPortPeakRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000."
::= { rateLimitPortEntry 2 }
rateLimitPortEgrRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000."
::= { rateLimitPortEntry 3 }
rateLimitPortCommitRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000."
::= { rateLimitPortEntry 4 }
-- brLimitSetup
brLimitSetup OBJECT IDENTIFIER ::= { ves1616f35 3 }
brLimitState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Broadcast/multicast/DLF rate limiting enabled/disabled for the switch."
::= { brLimitSetup 1 }
-- brLimitPortTable
brLimitPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrLimitPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { brLimitSetup 2 }
brLimitPortEntry OBJECT-TYPE
SYNTAX BrLimitPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in brLimitPortTable."
INDEX { dot1dBasePort }
::= { brLimitPortTable 1 }
BrLimitPortEntry ::=
SEQUENCE {
brLimitPortBrState EnabledStatus,
brLimitPortBrRate INTEGER,
brLimitPortMcState EnabledStatus,
brLimitPortMcRate INTEGER,
brLimitPortDlfState EnabledStatus,
brLimitPortDlfRate INTEGER
}
brLimitPortBrState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Broadcast rate limiting enabled/disabled on the port."
::= { brLimitPortEntry 1 }
brLimitPortBrRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Allowed broadcast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143."
::= { brLimitPortEntry 2 }
brLimitPortMcState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Multicast rate limiting enabled/disabled on the port."
::= { brLimitPortEntry 3 }
brLimitPortMcRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"AAllowed mullticast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143."
::= { brLimitPortEntry 4 }
brLimitPortDlfState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination lookup failure frames rate limiting enabled/disabled on the port."
::= { brLimitPortEntry 5 }
brLimitPortDlfRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Allowed destination lookup failure frames rate in pkts/s.
For FE port, the maximum value is 148800. For GE port, the maximum value is 262143."
::= { brLimitPortEntry 6 }
-- portSecuritySetup
portSecuritySetup OBJECT IDENTIFIER ::= { ves1616f35 4 }
portSecurityState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portSecuritySetup 1 }
portSecurityPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecurityPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { portSecuritySetup 2 }
portSecurityPortEntry OBJECT-TYPE
SYNTAX PortSecurityPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portSecurityPortTable."
INDEX { dot1dBasePort }
::= { portSecurityPortTable 1 }
PortSecurityPortEntry ::=
SEQUENCE {
portSecurityPortState EnabledStatus,
portSecurityPortLearnState EnabledStatus,
portSecurityPortCount INTEGER
}
portSecurityPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port Security enabled/disabled on the port.
Active(1) means this port only accept frames from static MAC addresses that are configured for the port,
and dynamic MAC address frames up to the number specified by portSecurityPortCount object."
::= { portSecurityPortEntry 1 }
portSecurityPortLearnState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MAC address learning enabled/disable on the port."
::= { portSecurityPortEntry 2 }
portSecurityPortCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of (dynamic) MAC addresses that may be learned on the port."
::= { portSecurityPortEntry 3 }
portSecurityMacFreeze OBJECT-TYPE
SYNTAX PortList
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This entry is used to execute MacFreeze action to port.
It's meaningless while reading this entry."
::= { portSecuritySetup 3 }
-- vlanTrunkPortTable
vlanTrunkSetup OBJECT IDENTIFIER ::= { ves1616f35 5 }
vlanTrunkPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanTrunkPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanTrunkSetup 1 }
vlanTrunkPortEntry OBJECT-TYPE
SYNTAX VlanTrunkPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlanTrunkPortTable."
INDEX { dot1dBasePort }
::= { vlanTrunkPortTable 1 }
VlanTrunkPortEntry ::=
SEQUENCE {
vlanTrunkPortState EnabledStatus
}
vlanTrunkPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VlanTrunking enabled/disabled on the port.
Active(1) to allow frames belonging to unknown
VLAN groups to pass through the switch."
::= { vlanTrunkPortEntry 1 }
-- ctlProtTransSetup
ctlProtTransSetup OBJECT IDENTIFIER ::= { ves1616f35 6 }
ctlProtTransState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bridge control protocol transparency enabled/disabled for the switch"
::= { ctlProtTransSetup 1 }
-- ctlProtTransTunnelPortTable
ctlProtTransTunnelPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtlProtTransTunnelPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { ctlProtTransSetup 2 }
ctlProtTransTunnelPortEntry OBJECT-TYPE
SYNTAX CtlProtTransTunnelPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in ctlProtTransTunnelPortTable."
INDEX { dot1dBasePort }
::= { ctlProtTransTunnelPortTable 1 }
CtlProtTransTunnelPortEntry ::=
SEQUENCE {
ctlProtTransTunnelMode INTEGER
}
ctlProtTransTunnelMode OBJECT-TYPE
SYNTAX INTEGER{
peer(0),
tunnel(1),
discard(2),
network(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bridge control protocol transparency mode for the port.
Modes: Peer(0), Tunnel(1), Discard(2), Network(3)"
::= { ctlProtTransTunnelPortEntry 1 }
-- vlanStackSetup
vlanStackSetup OBJECT IDENTIFIER ::= { ves1616f35 7 }
vlanStackState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN Stacking enabled/disabled for the switch."
::= { vlanStackSetup 1 }
vlanStackTpid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP TPID in hex format, e.g. 8100."
::= { vlanStackSetup 2 }
-- vlanStackPortTable
vlanStackPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanStackPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vlanStackSetup 3 }
vlanStackPortEntry OBJECT-TYPE
SYNTAX VlanStackPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vlanStackPortTable."
INDEX { dot1dBasePort }
::= { vlanStackPortTable 1 }
VlanStackPortEntry ::=
SEQUENCE {
vlanStackPortMode INTEGER,
vlanStackPortVid INTEGER,
vlanStackPortPrio INTEGER
}
vlanStackPortMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
access(2),
tunnel(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Mode of the port. Set Normal to have the switch ignore frames received
(or transmitted) on this port with VLAN stacking tags.
Anything you configure in SPVID and Priority are ignored.
Set Access mode to have the switch add the SP TPID tag to all incoming
frames received on this port. Set Access mode for ingress ports at the
edge of the service provider's network. Set Tunnel mode (available for
Gigabit ports only) for egress ports at the edge of the service provider's
network. In order to support VLAN stacking on a port, the port must be able
to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag)
to pass through it. normal (1), Access (2), tunnel (3)"
::= { vlanStackPortEntry 1 }
vlanStackPortVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN ID used in service provider tag."
::= { vlanStackPortEntry 2 }
vlanStackPortPrio OBJECT-TYPE
SYNTAX INTEGER {
prioriry-0(0),
prioriry-1(1),
prioriry-2(2),
prioriry-3(3),
prioriry-4(4),
prioriry-5(5),
prioriry-6(6),
prioriry-7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Priority value for service provider tag.
0 is the lowest priority level and 7 is the highest."
::= { vlanStackPortEntry 3 }
-- radius8021xSetup
radius8021xSetup OBJECT IDENTIFIER ::= { ves1616f35 8 }
radiusLoginPrecedence OBJECT-TYPE
SYNTAX INTEGER {
localOnly(1),
localThenRadius(2),
radiusOnly(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1. Local Only
2. Local then RADIUS
3. RADIUS Only"
::= { radius8021xSetup 1 }
-- radiusAnd8021xServer
radiusAnd8021xServer OBJECT IDENTIFIER ::= { radius8021xSetup 2 }
radiusIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the RADIUS server."
::= { radiusAnd8021xServer 1 }
radiusUdpPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The UDP port of the RADIUS server."
::= { radiusAnd8021xServer 2 }
radiusSharedSecret OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shared secret used for RADIUS and network element authentication."
::= { radiusAnd8021xServer 3 }
-- portAuthState
portAuthState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1x port authentication enabled/disabled for the switch."
::= { radius8021xSetup 3 }
-- 8021xPortAuthTable
portAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortAuthEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { radius8021xSetup 4 }
portAuthEntry OBJECT-TYPE
SYNTAX PortAuthEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portAuthTable."
INDEX { dot1dBasePort }
::= { portAuthTable 1 }
PortAuthEntry ::=
SEQUENCE {
portAuthEntryState EnabledStatus,
portReAuthEntryState EnabledStatus,
portReAuthEntryTimer INTEGER
}
portAuthEntryState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1x port authentication enabled or disabled on the port."
::= { portAuthEntry 1 }
portReAuthEntryState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1x port re-authentication enabled or disabled on the port."
::= { portAuthEntry 2 }
portReAuthEntryTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Re-authentication timer in seconds."
::= { portAuthEntry 3 }
-- hardwareInfo
hwMonitorInfo OBJECT IDENTIFIER ::= { ves1616f35 9 }
-- fabRpmTable
fanRpmTable OBJECT-TYPE
SYNTAX SEQUENCE OF FanRpmEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { hwMonitorInfo 1 }
fanRpmEntry OBJECT-TYPE
SYNTAX FanRpmEntry
ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in fanRpmTable."
INDEX { fanRpmIndex }
::= { fanRpmTable 1 }
FanRpmEntry ::=
SEQUENCE {
fanRpmIndex INTEGER,
fanRpmCurValue INTEGER,
fanRpmMaxValue INTEGER,
fanRpmMinValue INTEGER,
fanRpmLowThresh INTEGER,
fanRpmDescr DisplayString
}
fanRpmIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Index of FAN."
::= { fanRpmEntry 1 }
fanRpmCurValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Current speed in Revolutions Per Minute (RPM) on the fan."
::= { fanRpmEntry 2 }
fanRpmMaxValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Maximum speed measured in Revolutions Per Minute (RPM) on the fan."
::= { fanRpmEntry 3 }
fanRpmMinValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Minimum speed measured in Revolutions Per Minute (RPM) on the fan."
::= { fanRpmEntry 4 }
fanRpmLowThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The minimum speed at which a normal fan should work."
::= { fanRpmEntry 5 }
fanRpmDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"'Normal' indicates that this fan is functioning above the minimum speed.
'Error' indicates that this fan is functioning below the minimum speed."
::= { fanRpmEntry 6 }
-- tempTable
tempTable OBJECT-TYPE
SYNTAX SEQUENCE OF TempEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { hwMonitorInfo 2 }
tempEntry OBJECT-TYPE
SYNTAX TempEntry
ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in tempTable."
INDEX { tempIndex }
::= { tempTable 1 }
TempEntry ::=
SEQUENCE {
tempIndex INTEGER,
tempCurValue INTEGER,
tempMaxValue INTEGER,
tempMinValue INTEGER,
tempHighThresh INTEGER,
tempDescr DisplayString
}
tempIndex OBJECT-TYPE
SYNTAX INTEGER {
mac (1),
cpu (2),
phy (3)
}
ACCESS read-only
STATUS current
DESCRIPTION
"Index of temperature unit. 1:MAC, 2:CPU, 3:PHY"
::= { tempEntry 1 }
tempCurValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The current temperature measured at this sensor."
::= { tempEntry 2 }
tempMaxValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum temperature measured at this sensor."
::= { tempEntry 3 }
tempMinValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The minimum temperature measured at this sensor."
::= { tempEntry 4 }
tempHighThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The upper temperature limit at this sensor."
::= { tempEntry 5 }
tempDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"'Normal' indicates temperatures below the threshold and 'Error' for those above."
::= { tempEntry 6 }
-- voltageTable
voltageTable OBJECT-TYPE
SYNTAX SEQUENCE OF VoltageEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { hwMonitorInfo 3 }
voltageEntry OBJECT-TYPE
SYNTAX VoltageEntry
ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in voltageTable."
INDEX { voltageIndex }
::= { voltageTable 1 }
VoltageEntry ::=
SEQUENCE {
voltageIndex INTEGER,
voltageCurValue INTEGER,
voltageMaxValue INTEGER,
voltageMinValue INTEGER,
voltageNominalValue INTEGER,
voltageLowThresh INTEGER,
voltageDescr DisplayString
}
voltageIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Index of voltage."
::= { voltageEntry 1 }
voltageCurValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The current voltage reading."
::= { voltageEntry 2 }
voltageMaxValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum voltage measured at this point."
::= { voltageEntry 3 }
voltageMinValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The minimum voltage measured at this point."
::= { voltageEntry 4 }
voltageNominalValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The normal voltage at wchich the switch work."
::= { voltageEntry 5 }
voltageLowThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The minimum voltage at which the switch should work."
::= { voltageEntry 6 }
voltageDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"'Normal' indicates that the voltage is within an acceptable operating range
at this point; otherwise 'Error' is displayed."
::= { voltageEntry 7 }
-- snmpSetup
snmpSetup OBJECT IDENTIFIER ::= { ves1616f35 10 }
snmpGetCommunity OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 1 }
snmpSetCommunity OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 2 }
snmpTrapCommunity OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 3 }
-- snmpTrapDestTable
snmpTrapDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTrapDestEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { snmpSetup 4 }
snmpTrapDestEntry OBJECT-TYPE
SYNTAX SnmpTrapDestEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in snmpTrapDestTable."
INDEX { snmpTrapDestIP }
::= { snmpTrapDestTable 1 }
SnmpTrapDestEntry ::=
SEQUENCE {
snmpTrapDestIP IpAddress,
snmpTrapDestRowStatus RowStatus
}
snmpTrapDestIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IP address of trap destination."
::= { snmpTrapDestEntry 1 }
snmpTrapDestRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { snmpTrapDestEntry 2 }
-- dateTimeServerSetup
dateTimeServerSetup OBJECT IDENTIFIER ::= { ves1616f35 11 }
dateTimeServerType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
daytime(2),
time(3),
ntp(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time service protocol."
::= { dateTimeServerSetup 1 }
dateTimeServerIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of time server."
::= { dateTimeServerSetup 2 }
dateTimeZone OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time difference between UTC. Ex: +01"
::= { dateTimeServerSetup 3 }
dateTimeNewDateYear OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new date in year."
::= { dateTimeServerSetup 4 }
dateTimeNewDateMonth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new date in month."
::= { dateTimeServerSetup 5 }
dateTimeNewDateDay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new date in day."
::= { dateTimeServerSetup 6 }
dateTimeNewTimeHour OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new time in hour."
::= { dateTimeServerSetup 7 }
dateTimeNewTimeMinute OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new time in minute."
::= { dateTimeServerSetup 8 }
dateTimeNewTimeSecond OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new time in second."
::= { dateTimeServerSetup 9 }
-- sysMgmt
sysMgmt OBJECT IDENTIFIER ::= { ves1616f35 12 }
sysMgmtConfigSave OBJECT-TYPE
SYNTAX INTEGER {
config_1(1),
config_2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file.
If not, running-config will be written to the booting one."
::= { sysMgmt 1 }
sysMgmtBootupConfig OBJECT-TYPE
SYNTAX INTEGER {
config_1(1),
config_2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The setting value (read index) will be written into non-volatile memory.
While rebooting, the variable write index is equal to read index initially.
You can change the value of write index by CLI / MIB."
::= { sysMgmt 2 }
sysMgmtReboot OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
reboot(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reboot switch from SNMP. 1:Reboot, 0:Nothing"
::= { sysMgmt 3 }
sysMgmtDefaultConfig OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
reset_to_default(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Erase running config and reset to default."
::= { sysMgmt 4 }
sysMgmtLastActionStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display status of last mgmt action."
::= { sysMgmt 5 }
sysMgmtSystemStatus OBJECT-TYPE
SYNTAX BITS {
sysAlarmDetected(0),
sysTemperatureError(1),
sysFanRPMError(2),
sysVoltageRangeError(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the status of the system.
The sysMgmtAlarmStatus is a bit map represented
a sum, therefore, it can represent multiple defects
simultaneously. The sysNoDefect should be set if and only if
no other flag is set.
The various bit positions are:
0 sysAlarmDetected
1 sysTemperatureError
2 sysFanRPMError
3 sysVoltageRangeError"
::= { sysMgmt 6 }
sysMgmtCPUUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Show device CPU load in %, it's the snapshot of CPU load when
getting the values."
::= { sysMgmt 7 }
sysMgmtBootupImage OBJECT-TYPE
SYNTAX INTEGER {
image_1(1),
image_2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The setting value (read index) will be written into non-volatile memory.
When rebooting, the selected image will be used.
You can change the value of write index by CLI / MIB."
::= { sysMgmt 8 }
sysMgmtCounterReset OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset all port counters."
::= { sysMgmt 9 }
-- Tftp service
sysMgmtTftpServiceSetup OBJECT IDENTIFIER ::= { sysMgmt 10 }
sysMgmtTftpServerIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" IP address of TFTP server"
::= { sysMgmtTftpServiceSetup 1 }
sysMgmtTftpRemoteFileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file name that you want to backup to or restore from TFTP server"
::= { sysMgmtTftpServiceSetup 2 }
sysMgmtTftpConfigIndex OBJECT-TYPE
SYNTAX INTEGER {
config1(1),
config2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Index of system configuration which you want to restore."
::= { sysMgmtTftpServiceSetup 3 }
sysMgmtTftpAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
backup_config(1),
restore_config(2)
}
ACCESS read-write
STATUS mandatory DESCRIPTION
" Action of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server."
::= { sysMgmtTftpServiceSetup 4 }
-- layer2Setup
layer2Setup OBJECT IDENTIFIER ::= { ves1616f35 13 }
vlanTypeSetup OBJECT-TYPE
SYNTAX INTEGER {
dot1Q(1),
port_based(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 1 }
igmpSnoopingStateSetup OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 2 }
tagVlanPortIsolationState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 3 }
stpState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 4 }
igmpFilteringStateSetup OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 5 }
unknownMulticastFrameForwarding OBJECT-TYPE
SYNTAX INTEGER {
flooding(1),
drop(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { layer2Setup 6 }
-- ipSetup
ipSetup OBJECT IDENTIFIER ::= { ves1616f35 14 }
dnsIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { ipSetup 1 }
defaultMgmt OBJECT-TYPE
SYNTAX INTEGER {
in_band(0),
out_of_band(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { ipSetup 2 }
inbandIpSetup OBJECT IDENTIFIER ::= { ipSetup 3 }
inbandIpType OBJECT-TYPE
SYNTAX INTEGER {
dhcp_client(0),
static_ip(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpSetup 1 }
inbandVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpSetup 2 }
inbandStaticIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpSetup 3 }
inbandStaticSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpSetup 4 }
inbandStaticGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpSetup 5 }
outOfBandIpSetup OBJECT IDENTIFIER ::= { ipSetup 4 }
outOfBandIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { outOfBandIpSetup 1 }
outOfBandSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { outOfBandIpSetup 2 }
outOfBandGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { outOfBandIpSetup 3 }
-- inbandIpTable
maxNumOfInbandIp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { ipSetup 5 }
inbandIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF InbandIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { ipSetup 6 }
inbandIpEntry OBJECT-TYPE
SYNTAX InbandIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in inbandIpTable."
INDEX { inbandEntryIp, inbandEntryVid }
::= { inbandIpTable 1 }
InbandIpEntry ::=
SEQUENCE {
inbandEntryIp IpAddress,
inbandEntrySubnetMask IpAddress,
inbandEntryGateway IpAddress,
inbandEntryVid INTEGER,
inbandEntryManageable EnabledStatus,
inbandEntryRowStatus RowStatus
}
inbandEntryIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 1 }
inbandEntrySubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 2 }
inbandEntryGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 3 }
inbandEntryVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 4 }
inbandEntryManageable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 5 }
inbandEntryRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { inbandIpEntry 6 }
-- filterSetup
filterSetup OBJECT IDENTIFIER ::= { ves1616f35 15 }
-- filterTable
filterTable OBJECT-TYPE
SYNTAX SEQUENCE OF FilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { filterSetup 1 }
filterEntry OBJECT-TYPE
SYNTAX FilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in filterTable."
INDEX { filterMacAddr, filterVid }
::= { filterTable 1 }
FilterEntry ::=
SEQUENCE {
filterName DisplayString,
filterActionState INTEGER,
filterMacAddr MacAddress,
filterVid INTEGER,
filterRowStatus RowStatus
}
filterName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { filterEntry 1 }
filterActionState OBJECT-TYPE
SYNTAX INTEGER {
discard_source(1),
discard_destination(2),
both(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { filterEntry 2 }
filterMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { filterEntry 3 }
filterVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { filterEntry 4 }
filterRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { filterEntry 5 }
-- mirrorSetup
mirrorSetup OBJECT IDENTIFIER ::= { ves1616f35 16 }
-- mirrorState
mirrorState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mirrorSetup 1 }
mirrorMonitorPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mirrorSetup 2 }
-- mirrorTable
mirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF MirrorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { mirrorSetup 3 }
mirrorEntry OBJECT-TYPE
SYNTAX MirrorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mirrorTable."
INDEX { dot1dBasePort }
::= { mirrorTable 1 }
MirrorEntry ::=
SEQUENCE {
mirrorMirroredState EnabledStatus,
mirrorDirection INTEGER
}
mirrorMirroredState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mirrorEntry 1 }
mirrorDirection OBJECT-TYPE
SYNTAX INTEGER {
ingress(0),
egress(1),
both(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mirrorEntry 2 }
-- aggrSetup
aggrSetup OBJECT IDENTIFIER ::= { ves1616f35 17 }
aggrState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrSetup 1 }
aggrSystemPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrSetup 2 }
-- aggrGroupTable
aggrGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AggrGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { aggrSetup 3 }
aggrGroupEntry OBJECT-TYPE
SYNTAX AggrGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in aggrGroupTable."
INDEX { aggrGroupIndex }
::= { aggrGroupTable 1 }
AggrGroupEntry ::=
SEQUENCE {
aggrGroupIndex INTEGER,
aggrGroupState EnabledStatus,
aggrGroupDynamicState EnabledStatus
}
aggrGroupIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { aggrGroupEntry 1 }
aggrGroupState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrGroupEntry 2 }
aggrGroupDynamicState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrGroupEntry 3 }
-- aggrPortTable
aggrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AggrPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { aggrSetup 4 }
aggrPortEntry OBJECT-TYPE
SYNTAX AggrPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in aggrPortTable."
INDEX { dot1dBasePort }
::= { aggrPortTable 1 }
AggrPortEntry ::=
SEQUENCE {
aggrPortGroup INTEGER,
aggrPortDynamicStateTimeout INTEGER
}
aggrPortGroup OBJECT-TYPE
SYNTAX INTEGER {
none(0),
t1(1),
t2(2),
t3(3),
t4(4),
t5(5),
t6(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrPortEntry 1 }
aggrPortDynamicStateTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { aggrPortEntry 2 }
-- accessCtlSetup
accessCtlSetup OBJECT IDENTIFIER ::= { ves1616f35 18 }
-- accessCtlTable
accessCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccessCtlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { accessCtlSetup 1 }
accessCtlEntry OBJECT-TYPE
SYNTAX AccessCtlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in accessCtlTable."
INDEX { accessCtlService }
::= { accessCtlTable 1 }
AccessCtlEntry ::=
SEQUENCE {
accessCtlService INTEGER,
accessCtlEnable EnabledStatus,
accessCtlServicePort INTEGER,
accessCtlTimeout INTEGER
}
accessCtlService OBJECT-TYPE
SYNTAX INTEGER {
telnet(1),
ssh(2),
ftp(3),
http(4),
https(5),
icmp(6),
snmp(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { accessCtlEntry 1 }
accessCtlEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { accessCtlEntry 2 }
accessCtlServicePort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { accessCtlEntry 3 }
accessCtlTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { accessCtlEntry 4 }
-- securedClientTable
securedClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF SecuredClientEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { accessCtlSetup 2 }
securedClientEntry OBJECT-TYPE
SYNTAX SecuredClientEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in securedClientTable."
INDEX { securedClientIndex }
::= { securedClientTable 1 }
SecuredClientEntry ::=
SEQUENCE {
securedClientIndex INTEGER,
securedClientEnable EnabledStatus,
securedClientStartIp IpAddress,
securedClientEndIp IpAddress,
securedClientService BITS
}
securedClientIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 1 }
securedClientEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 2 }
securedClientStartIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 3 }
securedClientEndIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 4 }
securedClientService OBJECT-TYPE
SYNTAX BITS {
telnet(0),
ftp(1),
http(2),
icmp(3),
snmp(4),
ssh(5),
https(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { securedClientEntry 5 }
-- queuingMethodSetup
queuingMethodSetup OBJECT IDENTIFIER ::= { ves1616f35 19 }
queuingMethodType OBJECT-TYPE
SYNTAX INTEGER {
strictly_priority(0),
weighted_fair_scheduling(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { queuingMethodSetup 1 }
-- portQueuingMethodTable
portQueuingMethodTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortQueuingMethodEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { queuingMethodSetup 2 }
portQueuingMethodEntry OBJECT-TYPE
SYNTAX PortQueuingMethodEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portQueuingMethodTable."
INDEX { dot1dBasePort, portQueuingMethodQueue }
::= {portQueuingMethodTable 1}
PortQueuingMethodEntry ::=
SEQUENCE {
portQueuingMethodQueue INTEGER,
portQueuingMethodWeight INTEGER
}
portQueuingMethodQueue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"0...7"
::= { portQueuingMethodEntry 1 }
portQueuingMethodWeight OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0...15"
::= { portQueuingMethodEntry 2 }
queuingMethodFeSpq OBJECT-TYPE
SYNTAX INTEGER {
none(0),
q0(1),
q1(2),
q2(3),
q3(4),
q4(5),
q5(6),
q6(7),
q7(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"FE port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ."
::= { queuingMethodSetup 3 }
-- dhcpSetup
dhcpSetup OBJECT IDENTIFIER ::= { ves1616f35 20 }
dhcpRelay OBJECT IDENTIFIER ::= { dhcpSetup 1 }
dhcpRelayEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelay 1 }
dhcpRelayOption82Enable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelay 2 }
dhcpRelayInfoEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelay 3 }
dhcpRelayInfoData OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelay 4 }
-- dhcpRemoteServer
maxNumberOfDhcpRemoteServer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelay 5 }
-- dhcpRemoteServerTable
dhcpRemoteServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpRemoteServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { dhcpRelay 6 }
dhcpRemoteServerEntry OBJECT-TYPE
SYNTAX DhcpRemoteServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in dhcpRemoteServerTable."
INDEX { dhcpRemoteServerIp }
::= { dhcpRemoteServerTable 1 }
DhcpRemoteServerEntry ::=
SEQUENCE {
dhcpRemoteServerIp IpAddress,
dhcpRemoteServerRowStatus RowStatus
}
dhcpRemoteServerIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { dhcpRemoteServerEntry 1 }
dhcpRemoteServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { dhcpRemoteServerEntry 2 }
-- dhcpServer
dhcpServer OBJECT IDENTIFIER ::= { dhcpSetup 2 }
dhcpServerEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpServer 1 }
dhcpServerClientIPPoolStartingAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpServer 2 }
dhcpServerClientIPPoolSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpServer 3 }
dhcpServerIPSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpServer 4 }
dhcpServerDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpServer 5 }
dhcpServerPrimaryDNSServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpServer 6 }
dhcpServerSecondaryDNSServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { dhcpServer 7 }
-- staticRouteSetup
staticRouteSetup OBJECT IDENTIFIER ::= { ves1616f35 21 }
maxNumberOfStaticRoutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { staticRouteSetup 1 }
-- staticRouteTable
staticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { staticRouteSetup 2 }
staticRouteEntry OBJECT-TYPE
SYNTAX StaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in staticRouteTable."
INDEX { staticRouteIp, staticRouteMask }
::= { staticRouteTable 1 }
StaticRouteEntry ::=
SEQUENCE {
staticRouteName DisplayString,
staticRouteIp IpAddress,
staticRouteMask IpAddress,
staticRouteGateway IpAddress,
staticRouteMetric INTEGER,
staticRouteRowStatus RowStatus
}
staticRouteName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 1 }
staticRouteIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 2 }
staticRouteMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 3 }
staticRouteGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 4 }
staticRouteMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 5 }
staticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { staticRouteEntry 6 }
-- arpInfo
arpInfo OBJECT IDENTIFIER ::= { ves1616f35 22 }
-- arpTable
arpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { arpInfo 1 }
arpEntry OBJECT-TYPE
SYNTAX ArpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in arpTable."
INDEX { arpIndex }
::= { arpTable 1 }
ArpEntry ::=
SEQUENCE {
arpIndex INTEGER,
arpIpAddr IpAddress,
arpMacAddr MacAddress,
arpMacVid INTEGER,
arpType INTEGER
}
arpIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpEntry 1 }
arpIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpEntry 2 }
arpMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpEntry 3 }
arpMacVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpEntry 4 }
arpType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { arpEntry 5 }
-- pltMgmt
pltMgmt OBJECT IDENTIFIER ::= { ves1616f35 23 }
-- pltCtlTable
pltCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF PltCtlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { pltMgmt 1 }
pltCtlEntry OBJECT-TYPE
SYNTAX PltCtlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in pltCtlTable."
INDEX { pltCtlInstType, pltCtlInstId }
::= { pltCtlTable 1 }
PltCtlEntry ::=
SEQUENCE {
pltCtlInstType INTEGER,
pltCtlInstId INTEGER,
pltCtlIpAddr IpAddress,
pltCtlMask IpAddress,
pltCtlGw IpAddress,
pltCtlRowStatus RowStatus
}
pltCtlInstType OBJECT-TYPE
SYNTAX INTEGER {
vlan (1)
}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The type of the service instance that is tested.
1: VLAN
"
::= { pltCtlEntry 1 }
pltCtlInstId OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ID of the service instance that is tested."
::= { pltCtlEntry 2 }
pltCtlIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-create
STATUS mandatory
DESCRIPTION
"IP address of this PLT stack instance."
::= { pltCtlEntry 3 }
pltCtlMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-create
STATUS mandatory
DESCRIPTION
"IP subnet mask of this PLT stack instance."
::= { pltCtlEntry 4 }
pltCtlGw OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Default gateway IP address of this PLT stack instance."
::= { pltCtlEntry 5 }
pltCtlRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
"This object allows entries to be created and deleted in the pltCtlTable.
All value MUST be specified prior to a transition to active(1) state being accepted."
::= { pltCtlEntry 6 }
-- pingCtlTable
pingCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF PingCtlEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the ping Control Table for providing, via SNMP,
the capability of performing ping operations at
a remote host. The results of these operations are
stored in the pingResultsTable and the
pingProbeHistoryTable."
::= { pltMgmt 2 }
pingCtlEntry OBJECT-TYPE
SYNTAX PingCtlEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the pingCtlTable. The first index
element, pingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows an management application to identify its
entries. The second index, pingCtlTestName (also an
SnmpAdminString), enables the same management
application to have multiple outstanding requests."
INDEX {
pingCtlServInstType,
pingCtlServInstId,
pingCtlOwnerIndex,
pingCtlTestName
}
::= { pingCtlTable 1 }
PingCtlEntry ::=
SEQUENCE {
pingCtlServInstType INTEGER,
pingCtlServInstId INTEGER,
pingCtlOwnerIndex SnmpAdminString,
pingCtlTestName SnmpAdminString,
pingCtlTargetAddressType InetAddressType,
pingCtlTargetAddress InetAddress,
pingCtlDataSize Unsigned32,
pingCtlTimeOut Unsigned32,
pingCtlProbeCount Unsigned32,
pingCtlAdminStatus INTEGER,
pingCtlDataFill OCTET STRING,
pingCtlFrequency Unsigned32,
pingCtlMaxRows Unsigned32,
pingCtlStorageType StorageType,
pingCtlTrapGeneration BITS,
pingCtlTrapProbeFailureFilter Unsigned32,
pingCtlTrapTestFailureFilter Unsigned32,
pingCtlType OBJECT IDENTIFIER,
pingCtlDescr SnmpAdminString,
pingCtlSourceAddressType InetAddressType,
pingCtlSourceAddress InetAddress,
pingCtlIfIndex InterfaceIndexOrZero,
pingCtlByPassRouteTable TruthValue,
pingCtlDSField Unsigned32,
pingCtlRowStatus RowStatus
}
pingCtlServInstType OBJECT-TYPE
SYNTAX INTEGER {
vlan (1)
}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The type of the service instance that this ping entry belong to.
1: VLAN.
This item would be used as an index
"
::= { pingCtlEntry 1 }
pingCtlServInstId OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ID of the service instance that this ping entry belong to.
This item would be used as an index"
::= { pingCtlEntry 2 }
pingCtlOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
ACCESS not-accessible
STATUS current
DESCRIPTION
"To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need to independently create or
modify entries, the initial index is used as an 'owner
index'. Such an initial index has a syntax of
SnmpAdminString, and can thus be trivially mapped to a
securityName or groupName as defined in VACM, in
accordance with a security policy.
When used in conjunction with such a security policy all
entries in the table belonging to a particular user (or
group) will have the same value for this initial index.
For a given user's entries in a particular table, the
object identifiers for the information in these entries
will have the same subidentifiers (except for the 'column'
subidentifier) up to the end of the encoded owner index.
To configure VACM to permit access to this portion of the
table, one would create vacmViewTreeFamilyTable entries
with the value of vacmViewTreeFamilySubtree including
the owner index portion, and vacmViewTreeFamilyMask
'wildcarding' the column subidentifier. More elaborate
configurations are possible."
::= { pingCtlEntry 3 }
pingCtlTestName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the ping test. This is locally unique, within
the scope of an pingCtlOwnerIndex."
::= { pingCtlEntry 4 }
pingCtlTargetAddressType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of host address to be used at a remote
host for performing a ping operation."
DEFVAL { unknown }
::= { pingCtlEntry 5 }
pingCtlTargetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the host address to be used at a remote host for
performing a ping operation. The host address type is
determined by the object value of corresponding
pingCtlTargetAddressType.
A value for this object MUST be set prior to transitioning
its corresponding pingCtlEntry to active(1) via
pingCtlRowStatus."
DEFVAL { ''H }
::= { pingCtlEntry 6 }
pingCtlDataSize OBJECT-TYPE
SYNTAX Unsigned32 (0..65507)
UNITS "octets"
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the size of the data portion to be
transmitted in a ping operation in octets. A ping
request is usually an ICMP message encoded
into an IP packet. An IP packet has a maximum size
of 65535 octets. Subtracting the size of the ICMP
or UDP header (both 8 octets) and the size of the IP
header (20 octets) yields a maximum size of 65507
octets."
DEFVAL { 0 }
::= { pingCtlEntry 7 }
pingCtlTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the time-out value, in seconds, for a
remote ping operation."
DEFVAL { 3 }
::= { pingCtlEntry 8 }
pingCtlProbeCount OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
UNITS "probes"
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the number of times to perform a ping
operation at a remote host."
DEFVAL { 1 }
::= { pingCtlEntry 9 }
pingCtlAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1), -- test should be started
disabled(2) -- test should be stopped
}
ACCESS read-create
STATUS current
DESCRIPTION
"Reflects the desired state that a pingCtlEntry should be
in:
enabled(1) - Attempt to activate the test as defined by
this pingCtlEntry.
disabled(2) - Deactivate the test as defined by this
pingCtlEntry.
Refer to the corresponding pingResultsOperStatus to
determine the operational state of the test defined by
this entry."
DEFVAL { disabled }
::= { pingCtlEntry 10 }
pingCtlDataFill OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
ACCESS read-create
STATUS current
DESCRIPTION
"The content of this object is used together with the
corresponding pingCtlDataSize value to determine how to
fill the data portion of a probe packet. The option of
selecting a data fill pattern can be useful when links
are compressed or have data pattern sensitivities. The
contents of pingCtlDataFill should be repeated in a ping
packet when the size of the data portion of the ping
packet is greater than the size of pingCtlDataFill."
DEFVAL { '00'H }
::= { pingCtlEntry 11 }
pingCtlFrequency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds to wait before repeating a ping test
as defined by the value of the various objects in the
corresponding row.
A single ping test consists of a series of ping probes.
The number of probes is determined by the value of the
corresponding pingCtlProbeCount object. After a single
test completes the number of seconds as defined by the
value of pingCtlFrequency MUST elapse before the
next ping test is started.
A value of 0 for this object implies that the test
as defined by the corresponding entry will not be
repeated."
DEFVAL { 0 }
::= { pingCtlEntry 12 }
pingCtlMaxRows OBJECT-TYPE
SYNTAX Unsigned32
UNITS "rows"
ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of entries allowed in the
pingProbeHistoryTable. An implementation of this
MIB will remove the oldest entry in the
pingProbeHistoryTable to allow the addition of an
new entry once the number of rows in the
pingProbeHistoryTable reaches this value.
Old entries are not removed when a new test is
started. Entries are added to the pingProbeHistoryTable
until pingCtlMaxRows is reached before entries begin to
be removed.
A value of 0 for this object disables creation of
pingProbeHistoryTable entries."
DEFVAL { 50 }
::= { pingCtlEntry 13 }
pingCtlStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { pingCtlEntry 14 }
pingCtlTrapGeneration OBJECT-TYPE
SYNTAX BITS {
probeFailure(0),
testFailure(1),
testCompletion(2)
}
ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object determines when and if
to generate a notification for this entry:
probeFailure(0) - Generate a pingProbeFailed
notification subject to the value of
pingCtlTrapProbeFailureFilter. The object
pingCtlTrapProbeFailureFilter can be used
to specify the number of successive probe failures
that are required before a pingProbeFailed
notification can be generated.
testFailure(1) - Generate a pingTestFailed
notification. In this instance the object
pingCtlTrapTestFailureFilter can be used to
determine the number of probe failures that
signal when a test fails.
testCompletion(2) - Generate a pingTestCompleted
notification.
The value of this object defaults to zero, indicating
that none of the above options have been selected."
::= { pingCtlEntry 15 }
pingCtlTrapProbeFailureFilter OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is used to determine when
to generate a pingProbeFailed NOTIFICATION.
Setting pingCtlTrapGeneration
to probeFailure(0) implies that a pingProbeFailed
NOTIFICATION is generated only when the number of
successive probe failures as indicated by the
value of pingCtlTrapPrbefailureFilter fail within
a given ping test."
DEFVAL { 1 }
::= { pingCtlEntry 16 }
pingCtlTrapTestFailureFilter OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is used to determine when
to generate a pingTestFailed NOTIFICATION.
Setting pingCtlTrapGeneration to testFailure(1)
implies that a pingTestFailed NOTIFICATION is
generated only when the number of ping failures
within a test exceed the value of
pingCtlTrapTestFailureFilter."
DEFVAL { 1 }
::= { pingCtlEntry 17 }
pingCtlType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is used to either report or
select the implementation method to be used for
calculating a ping response time. The value of this
object MAY be selected from pingImplementationTypeDomains.
Additional implementation types SHOULD be allocated as
required by implementers of the DISMAN-PING-MIB under
their enterprise specific registration point and not
beneath pingImplementationTypeDomains."
DEFVAL { pingIcmpEcho }
::= { pingCtlEntry 18 }
pingCtlDescr OBJECT-TYPE
SYNTAX SnmpAdminString
ACCESS read-create
STATUS current
DESCRIPTION
"The purpose of this object is to provide a
descriptive name of the remote ping test."
DEFVAL { '00'H }
::= { pingCtlEntry 19 }
pingCtlSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of the source address,
pingCtlSourceAddress, to be used at a remote host
when performing a ping operation."
DEFVAL { ipv4 }
::= { pingCtlEntry 20 }
pingCtlSourceAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-create
STATUS current
DESCRIPTION
"Use the specified IP address (which must be given
in numeric form, not as a hostname) as the source
address in outgoing probe packets. On hosts with
more than one IP address, this option can be used
to force the source address to be something other
than the primary IP address of the interface the
probe packet is sent on. If the IP address is not
one of this machine's interface addresses, an error
is returned and nothing is sent. A zero length
octet string value for this object disables source
address specification.
The address type (InetAddressType) that relates to
this object is specified by the corresponding value
of pingCtlSourceAddressType."
DEFVAL { ''H }
::= { pingCtlEntry 21 }
pingCtlIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
ACCESS read-create
STATUS current
DESCRIPTION
"Setting this object to an interface's ifIndex prior
to starting a remote ping operation directs
the ping probes to be transmitted over the
specified interface. A value of zero for this object
means that this option is not enabled."
DEFVAL { 0 }
::= { pingCtlEntry 22 }
pingCtlByPassRouteTable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-create
STATUS current
DESCRIPTION
"The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an attached network. If the
host is not on a directly-attached network, an
error is returned. This option can be used to perform
the ping operation to a local host through an
interface that has no route defined (e.g., after the
interface was dropped by routed)."
DEFVAL { false }
::= { pingCtlEntry 23 }
pingCtlDSField OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the ping probe. The DS Field is defined
as the Type of Service (TOS) octet in a IPv4 header
or as the Traffic Class octet in a IPv6 header.
The value of this object must be a decimal integer
in the range from 0 to 255. This option can be used
to determine what effect an explicit DS Field setting
has on a ping response. Not all values are legal or
meaningful. A value of 0 means that the function
represented by this option is not supported. DS Field
usage is often not supported by IP implementations and
not all values are supported. Refer to RFC 2474 for
guidance on usage of this field."
REFERENCE
"Refer to RFC 2474 for the definition of the
Differentiated Services Field and to RFC 1812
Section 5.3.2 for Type of Service (TOS)."
DEFVAL { 0 }
::= { pingCtlEntry 24 }
pingCtlRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
in the pingCtlTable. Deletion of an entry in this
table results in all corresponding (same
pingCtlOwnerIndex and pingCtlTestName index values)
pingResultsTable and pingProbeHistoryTable entries
being deleted.
A value MUST be specified for pingCtlTargetAddress
prior to a transition to active(1) state being
accepted.
Activation of a remote ping operation is controlled
via pingCtlAdminStatus and not by changing
this object's value to active(1).
Transitions in and out of active(1) state are not
allowed while an entry's pingResultsOperStatus is
active(1) with the exception that deletion of
an entry in this table by setting its RowStatus
object to destroy(6) will stop an active
ping operation.
The operational state of a ping operation
can be determined by examination of its
pingResultsOperStatus object."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual
Conventions for SMIv2.'"
::= { pingCtlEntry 25 }
-- Ping Results Table
pingResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PingResultsEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Ping Results Table for providing
the capability of performing ping operations at
a remote host. The results of these operations are
stored in the pingResultsTable and the pingPastProbeTable.
An entry is added to the pingResultsTable when an
pingCtlEntry is started by successful transition
of its pingCtlAdminStatus object to enabled(1).
An entry is removed from the pingResultsTable when
its corresponding pingCtlEntry is deleted."
::= { pltMgmt 3 }
pingResultsEntry OBJECT-TYPE
SYNTAX PingResultsEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the pingResultsTable. The
pingResultsTable has the same indexing as the
pingCtlTable in order for a pingResultsEntry to
correspond to the pingCtlEntry that caused it to
be created."
INDEX {
pingCtlServInstType,
pingCtlServInstId,
pingCtlOwnerIndex,
pingCtlTestName
}
::= { pingResultsTable 1 }
PingResultsEntry ::=
SEQUENCE {
pingResultsOperStatus INTEGER,
pingResultsIpTargetAddressType InetAddressType,
pingResultsIpTargetAddress InetAddress,
pingResultsMinRtt Unsigned32,
pingResultsMaxRtt Unsigned32,
pingResultsAverageRtt Unsigned32,
pingResultsProbeResponses Unsigned32,
pingResultsSentProbes Unsigned32,
pingResultsRttSumOfSquares Unsigned32,
pingResultsLastGoodProbe DateAndTime
}
pingResultsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1), -- test is in progress
disabled(2) -- test has stopped
}
ACCESS read-only
STATUS current
DESCRIPTION
"Reflects the operational state of a pingCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped."
::= { pingResultsEntry 1 }
pingResultsIpTargetAddressType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-only
STATUS current
DESCRIPTION
"This objects indicates the type of address stored
in the corresponding pingResultsIpTargetAddress
object."
DEFVAL { unknown }
::= { pingResultsEntry 2 }
pingResultsIpTargetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS current
DESCRIPTION
"This objects reports the IP address associated
with a pingCtlTargetAddress value when the destination
address is specified as a DNS name. The value of
this object should be a zero length octet string
when a DNS name is not specified or when a
specified DNS name fails to resolve."
DEFVAL { ''H }
::= { pingResultsEntry 3 }
pingResultsMinRtt OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
ACCESS read-only
STATUS current
DESCRIPTION
"The minimum ping round-trip-time (RTT) received. A value
of 0 for this object implies that no RTT has been received."
::= { pingResultsEntry 4 }
pingResultsMaxRtt OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum ping round-trip-time (RTT) received. A value
of 0 for this object implies that no RTT has been received."
::= { pingResultsEntry 5 }
pingResultsAverageRtt OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
ACCESS read-only
STATUS current
DESCRIPTION
"The current average ping round-trip-time (RTT)."
::= { pingResultsEntry 6 }
pingResultsProbeResponses OBJECT-TYPE
SYNTAX Unsigned32
UNITS "responses"
ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses received for the corresponding
pingCtlEntry and pingResultsEntry. The value of this object
MUST be reported as 0 when no probe responses have been
received."
::= { pingResultsEntry 7 }
pingResultsSentProbes OBJECT-TYPE
SYNTAX Unsigned32
UNITS "probes"
ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object reflects the number of probes sent
for the corresponding pingCtlEntry and pingResultsEntry.
The value of this object MUST be reported as 0 when no probes
have been sent."
::= { pingResultsEntry 8 }
pingResultsRttSumOfSquares OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all ping
responses received. Its purpose is to enable standard
deviation calculation. The value of this object MUST
be reported as 0 when no ping responses have been
received."
::= { pingResultsEntry 9 }
pingResultsLastGoodProbe OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-only
STATUS current
DESCRIPTION
"Date and time when the last response was received for
a probe."
::= { pingResultsEntry 10 }
-- Ping Probe History Table
pingProbeHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF PingProbeHistoryEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of a ping
operation. Entries in this table are limited by
the value of the corresponding pingCtlMaxRows
object.
An entry in this table is created when the result of
a ping probe is determined. The initial 2 instance
identifier index values identify the pingCtlEntry
that a probe result (pingProbeHistoryEntry) belongs
to. An entry is removed from this table when
its corresponding pingCtlEntry is deleted.
An implementation of this MIB will remove the oldest
entry in the pingProbeHistoryTable to allow the
addition of an new entry once the number of rows in
the pingProbeHistoryTable reaches the value specified
by pingCtlMaxRows."
::= { pltMgmt 4 }
pingProbeHistoryEntry OBJECT-TYPE
SYNTAX PingProbeHistoryEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the pingProbeHistoryTable.
The first two index elements identify the
pingCtlEntry that a pingProbeHistoryEntry belongs
to. The third index element selects a single
probe result."
INDEX {
pingCtlServInstType,
pingCtlServInstId,
pingCtlOwnerIndex,
pingCtlTestName,
pingProbeHistoryIndex
}
::= { pingProbeHistoryTable 1 }
PingProbeHistoryEntry ::=
SEQUENCE {
pingProbeHistoryIndex Unsigned32,
pingProbeHistoryResponse Unsigned32,
pingProbeHistoryStatus OperationResponseStatus,
pingProbeHistoryLastRC Integer32,
pingProbeHistoryTime DateAndTime
}
pingProbeHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..'ffffffff'h)
ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created when the result of
a ping probe is determined. The initial 2 instance
identifier index values identify the pingCtlEntry
that a probe result (pingProbeHistoryEntry) belongs
to.
An implementation MUST start assigning
pingProbeHistoryIndex values at 1 and wrap after
exceeding the maximum possible value as defined by
the limit of this object ('ffffffff'h)."
::= { pingProbeHistoryEntry 1 }
pingProbeHistoryResponse OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe."
::= { pingProbeHistoryEntry 2 }
pingProbeHistoryStatus OBJECT-TYPE
SYNTAX OperationResponseStatus
ACCESS read-only
STATUS current
DESCRIPTION
"The result of a particular probe done by a remote host."
::= { pingProbeHistoryEntry 3 }
pingProbeHistoryLastRC OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS current
DESCRIPTION
"The last implementation method specific reply code received.
If the ICMP Echo capability is being used then a successful
probe ends when an ICMP response is received that contains
the code ICMP_ECHOREPLY(0). The ICMP responses are defined
normally in the ip_icmp include file."
::= { pingProbeHistoryEntry 4 }
pingProbeHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp for when this probe result was determined."
::= { pingProbeHistoryEntry 5 }
-- Traceroute Control Table
traceRouteCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRouteCtlEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Remote Operations Traceroute Control Table for
providing the capability of invoking traceroute from a remote
host. The results of traceroute operations can be stored in
the traceRouteResultsTable, traceRouteProbeHistoryTable, and
the traceRouteHopsTable."
::= { pltMgmt 5 }
traceRouteCtlEntry OBJECT-TYPE
SYNTAX TraceRouteCtlEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the traceRouteCtlTable. The first
index element, traceRouteCtlOwnerIndex, is of type
SnmpAdminString, a textual convention that allows for
use of the SNMPv3 View-Based Access Control Model
(RFC 2575 [11], VACM) and allows an management
application to identify its entries. The second index,
traceRouteCtlTestName (also an SnmpAdminString),
enables the same management application to have
multiple requests outstanding."
INDEX {
traceRouteCtlServInstType,
traceRouteCtlServInstId,
traceRouteCtlOwnerIndex,
traceRouteCtlTestName
}
::= { traceRouteCtlTable 1 }
TraceRouteCtlEntry ::=
SEQUENCE {
traceRouteCtlServInstType INTEGER,
traceRouteCtlServInstId INTEGER,
traceRouteCtlOwnerIndex SnmpAdminString,
traceRouteCtlTestName SnmpAdminString,
traceRouteCtlTargetAddressType InetAddressType,
traceRouteCtlTargetAddress InetAddress,
traceRouteCtlByPassRouteTable TruthValue,
traceRouteCtlDataSize Unsigned32,
traceRouteCtlTimeOut Unsigned32,
traceRouteCtlProbesPerHop Unsigned32,
traceRouteCtlPort Unsigned32,
traceRouteCtlMaxTtl Unsigned32,
traceRouteCtlDSField Unsigned32,
traceRouteCtlSourceAddressType InetAddressType,
traceRouteCtlSourceAddress InetAddress,
traceRouteCtlIfIndex InterfaceIndexOrZero,
traceRouteCtlMiscOptions SnmpAdminString,
traceRouteCtlMaxFailures Unsigned32,
traceRouteCtlDontFragment TruthValue,
traceRouteCtlInitialTtl Unsigned32,
traceRouteCtlFrequency Unsigned32,
traceRouteCtlStorageType StorageType,
traceRouteCtlAdminStatus INTEGER,
traceRouteCtlMaxRows Unsigned32,
traceRouteCtlTrapGeneration BITS,
traceRouteCtlDescr SnmpAdminString,
traceRouteCtlCreateHopsEntries TruthValue,
traceRouteCtlType OBJECT IDENTIFIER,
traceRouteCtlRowStatus RowStatus
}
traceRouteCtlServInstType OBJECT-TYPE
SYNTAX INTEGER {
vlan (1)
}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The type of the service instance that this traceRoute entry belong to.
1: VLAN.
This item would be used as an index
"
::= { traceRouteCtlEntry 1 }
traceRouteCtlServInstId OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ID of the service instance that this traceRoute entry belong to.
This item would be used as an index"
::= { traceRouteCtlEntry 2 }
traceRouteCtlOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
ACCESS not-accessible
STATUS current
DESCRIPTION
"To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need to independently create or
modify entries, the initial index is used as an 'owner
index'. Such an initial index has a syntax of
SnmpAdminString, and can thus be trivially mapped to a
securityName or groupName as defined in VACM, in
accordance with a security policy.
When used in conjunction with such a security policy
all entries in the table belonging to a particular user
(or group) will have the same value for this initial
index. For a given user's entries in a particular
table, the object identifiers for the information in
these entries will have the same subidentifiers (except
for the 'column' subidentifier) up to the end of the
encoded owner index. To configure VACM to permit access
to this portion of the table, one would create
vacmViewTreeFamilyTable entries with the value of
vacmViewTreeFamilySubtree including the owner index
portion, and vacmViewTreeFamilyMask 'wildcarding' the
column subidentifier. More elaborate configurations
are possible."
::= { traceRouteCtlEntry 3 }
traceRouteCtlTestName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of a traceroute test. This is locally unique,
within the scope of an traceRouteCtlOwnerIndex."
::= { traceRouteCtlEntry 4 }
traceRouteCtlTargetAddressType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of host address to be used on the
traceroute request at the remote host."
DEFVAL { ipv4 }
::= { traceRouteCtlEntry 5 }
traceRouteCtlTargetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the host address used on the
traceroute request at the remote host. The
host address type can be determined by the
examining the value of the corresponding
traceRouteCtlTargetAddressType index element.
A value for this object MUST be set prior to
transitioning its corresponding traceRouteCtlEntry to
active(1) via traceRouteCtlRowStatus."
::= { traceRouteCtlEntry 6 }
traceRouteCtlByPassRouteTable OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-create
STATUS current
DESCRIPTION
"The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an attached network. If the
host is not on a directly-attached network, an
error is returned. This option can be used to perform
the traceroute operation to a local host through an
interface that has no route defined (e.g., after the
interface was dropped by routed)."
DEFVAL { false }
::= { traceRouteCtlEntry 7 }
traceRouteCtlDataSize OBJECT-TYPE
SYNTAX Unsigned32 (0..65507)
UNITS "octets"
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the size of the data portion of a traceroute
request in octets. A traceroute request is essentially
transmitted by encoding a UDP datagram into a
IP packet. So subtracting the size of a UDP header
(8 octets) and the size of a IP header (20 octets)
yields a maximum of 65507 octets."
DEFVAL { 0 }
::= { traceRouteCtlEntry 8 }
traceRouteCtlTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the time-out value, in seconds, for
a traceroute request."
DEFVAL { 3 }
::= { traceRouteCtlEntry 9 }
traceRouteCtlProbesPerHop OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "probes"
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the number of times to reissue a traceroute
request with the same time-to-live (TTL) value."
DEFVAL { 3 }
::= { traceRouteCtlEntry 10 }
traceRouteCtlPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "UDP Port"
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the UDP port to send the traceroute
request to. Need to specify a port that is not in
use at the destination (target) host. The default
value for this object is the IANA assigned port,
33434, for the traceroute function."
DEFVAL { 33434 }
::= { traceRouteCtlEntry 11 }
traceRouteCtlMaxTtl OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
UNITS "time-to-live value"
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum time-to-live value."
DEFVAL { 30 }
::= { traceRouteCtlEntry 12 }
traceRouteCtlDSField OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the traceroute probe. The DS Field is
defined as the Type of Service (TOS) octet in a IPv4
header or as the Traffic Class octet in a IPv6 header.
The value of this object must be a decimal integer
in the range from 0 to 255. This option can be used
to determine what effect an explicit DS Field setting
has on a traceroute response. Not all values are legal
or meaningful. DS Field usage is often not supported
by IP implementations. A value of 0 means that the
function represented by this option is not supported.
Useful TOS octet values are probably '16' (low delay)
and '8' ( high throughput)."
REFERENCE
"Refer to RFC 2474 for the definition of the
Differentiated Services Field and to RFC 1812
Section 5.3.2 for Type of Service (TOS)."
DEFVAL { 0 }
::= { traceRouteCtlEntry 13 }
traceRouteCtlSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of the source address,
traceRouteCtlSourceAddress, to be used at a remote host
when performing a traceroute operation."
DEFVAL { unknown }
::= { traceRouteCtlEntry 14 }
traceRouteCtlSourceAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-create
STATUS current
DESCRIPTION
"Use the specified IP address (which must be given
as an IP number, not a hostname) as the source
address in outgoing probe packets. On hosts with
more than one IP address, this option can be used
to force the source address to be something other
than the primary IP address of the interface the
probe packet is sent on. If the IP address is not
one of this machine's interface addresses, an error
is returned and nothing is sent. A zero length
octet string value for this object disables source
address specification.
The address type (InetAddressType) that relates to
this object is specified by the corresponding value
of traceRouteCtlSourceAddressType."
DEFVAL { ''H }
::= { traceRouteCtlEntry 15 }
traceRouteCtlIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
ACCESS read-create
STATUS current
DESCRIPTION
"Setting this object to an interface's ifIndex prior
to starting a remote traceroute operation directs
the traceroute probes to be transmitted over the
specified interface. A value of zero for this object
implies that this option is not enabled."
DEFVAL { 0 }
::= { traceRouteCtlEntry 16 }
traceRouteCtlMiscOptions OBJECT-TYPE
SYNTAX SnmpAdminString
ACCESS read-create
STATUS current
DESCRIPTION
"Enables an application to specify implementation
dependent options."
DEFVAL { ''H }
::= { traceRouteCtlEntry 17 }
traceRouteCtlMaxFailures OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "timeouts"
ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object indicates the maximum number
of consecutive timeouts allowed before terminating
a remote traceroute request. A value of either 255 (maximum
hop count/possible TTL value) or a 0 indicates that the
function of terminating a remote traceroute request when a
specific number of successive timeouts are detected is
disabled."
DEFVAL { 5 }
::= { traceRouteCtlEntry 18 }
traceRouteCtlDontFragment OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-create
STATUS current
DESCRIPTION
"This object enables setting of the don't fragment flag (DF)
in the IP header for a probe. Use of this object enables
performing a manual PATH MTU test."
DEFVAL { false }
::= { traceRouteCtlEntry 19 }
traceRouteCtlInitialTtl OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies the initial TTL value to
use. This enables bypassing the initial (often well known)
portion of a path."
DEFVAL { 1 }
::= { traceRouteCtlEntry 20 }
traceRouteCtlFrequency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds to wait before repeating a
traceroute test as defined by the value of the
various objects in the corresponding row.
The number of hops in a single traceroute test
is determined by the value of the corresponding
traceRouteCtlProbesPerHop object. After a
single test completes the number of seconds as defined
by the value of traceRouteCtlFrequency MUST elapse
before the next traceroute test is started.
A value of 0 for this object implies that the test
as defined by the corresponding entry will not be
repeated."
DEFVAL { 0 }
::= { traceRouteCtlEntry 21 }
traceRouteCtlStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { traceRouteCtlEntry 22 }
traceRouteCtlAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1), -- operation should be started
disabled(2) -- operation should be stopped
}
ACCESS read-create
STATUS current
DESCRIPTION
"Reflects the desired state that an traceRouteCtlEntry
should be in:
enabled(1) - Attempt to activate the test as defined by
this traceRouteCtlEntry.
disabled(2) - Deactivate the test as defined by this
traceRouteCtlEntry.
Refer to the corresponding traceRouteResultsOperStatus to
determine the operational state of the test defined by
this entry."
DEFVAL { disabled }
::= { traceRouteCtlEntry 23 }
traceRouteCtlDescr OBJECT-TYPE
SYNTAX SnmpAdminString
ACCESS read-create
STATUS current
DESCRIPTION
"The purpose of this object is to provide a
descriptive name of the remote traceroute
test."
DEFVAL { '00'H }
::= { traceRouteCtlEntry 24 }
traceRouteCtlMaxRows OBJECT-TYPE
SYNTAX Unsigned32
UNITS "rows"
ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of entries allowed in the
traceRouteProbeHistoryTable. An implementation of
this MIB will remove the oldest entry in the
traceRouteProbeHistoryTable to allow the addition
of an new entry once the number of rows in the
traceRouteProbeHistoryTable reaches this value.
Old entries are not removed when a new test is
started. Entries are added to the
traceRouteProbeHistoryTable until traceRouteCtlMaxRows
is reached before entries begin to be removed.
A value of 0 for this object disables creation of
traceRouteProbeHistoryTable entries."
DEFVAL { 50 }
::= { traceRouteCtlEntry 25 }
traceRouteCtlTrapGeneration OBJECT-TYPE
SYNTAX BITS {
pathChange(0),
testFailure(1),
testCompletion(2)
}
ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object determines when and if to
to generate a notification for this entry:
pathChange(0) - Generate a traceRoutePathChange
notification when the current path varies from a
previously determined path.
testFailure(1) - Generate a traceRouteTestFailed
notification when the full path to a target
can't be determined.
testCompletion(2) - Generate a traceRouteTestCompleted
notification when the path to a target has been
determined.
The value of this object defaults to zero, indicating
that none of the above options have been selected."
::= { traceRouteCtlEntry 26 }
traceRouteCtlCreateHopsEntries OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-create
STATUS current
DESCRIPTION
"The current path for a traceroute test is kept in the
traceRouteHopsTable on a per hop basis when the value of
this object is true(1)."
DEFVAL { false }
::= { traceRouteCtlEntry 27 }
traceRouteCtlType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is used either to report or
select the implementation method to be used for
performing a traceroute operation. The value of this
object may be selected from
traceRouteImplementationTypeDomains.
Additional implementation types should be allocated as
required by implementers of the DISMAN-TRACEROUTE-MIB
under their enterprise specific registration point and
not beneath traceRouteImplementationTypeDomains."
DEFVAL { traceRouteUsingUdpProbes }
::= { traceRouteCtlEntry 28 }
traceRouteCtlRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
in the traceRouteCtlTable. Deletion of an entry in
this table results in all corresponding (same
traceRouteCtlOwnerIndex and traceRouteCtlTestName
index values) traceRouteResultsTable,
traceRouteProbeHistoryTable, and traceRouteHopsTable
entries being deleted.
A value MUST be specified for traceRouteCtlTargetAddress
prior to a transition to active(1) state being
accepted.
Activation of a remote traceroute operation is
controlled via traceRouteCtlAdminStatus and not
by transitioning of this object's value to active(1).
Transitions in and out of active(1) state are not
allowed while an entry's traceRouteResultsOperStatus
is active(1) with the exception that deletion of
an entry in this table by setting its RowStatus
object to destroy(6) will stop an active
traceroute operation.
The operational state of an traceroute operation
can be determined by examination of the corresponding
traceRouteResultsOperStatus object."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual
Conventions for SMIv2.'"
::= { traceRouteCtlEntry 29 }
-- Traceroute Results Table
traceRouteResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRouteResultsEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Remote Operations Traceroute Results Table for
keeping track of the status of a traceRouteCtlEntry.
An entry is added to the traceRouteResultsTable when an
traceRouteCtlEntry is started by successful transition
of its traceRouteCtlAdminStatus object to enabled(1).
An entry is removed from the traceRouteResultsTable when
its corresponding traceRouteCtlEntry is deleted."
::= { pltMgmt 6 }
traceRouteResultsEntry OBJECT-TYPE
SYNTAX TraceRouteResultsEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the traceRouteResultsTable. The
traceRouteResultsTable has the same indexing as the
traceRouteCtlTable in order for a traceRouteResultsEntry
to correspond to the traceRouteCtlEntry that caused it to
be created."
INDEX {
traceRouteCtlServInstType,
traceRouteCtlServInstId,
traceRouteCtlOwnerIndex,
traceRouteCtlTestName
}
::= { traceRouteResultsTable 1 }
TraceRouteResultsEntry ::=
SEQUENCE {
traceRouteResultsOperStatus INTEGER,
traceRouteResultsCurHopCount Gauge32,
traceRouteResultsCurProbeCount Gauge32,
traceRouteResultsIpTgtAddrType InetAddressType,
traceRouteResultsIpTgtAddr InetAddress,
traceRouteResultsTestAttempts Unsigned32,
traceRouteResultsTestSuccesses Unsigned32,
traceRouteResultsLastGoodPath DateAndTime
}
traceRouteResultsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1), -- test is in progress
disabled(2) -- test has stopped
}
ACCESS read-only
STATUS current
DESCRIPTION
"Reflects the operational state of an traceRouteCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped."
::= { traceRouteResultsEntry 1 }
traceRouteResultsCurHopCount OBJECT-TYPE
SYNTAX Gauge32
UNITS "hops"
ACCESS read-only
STATUS current
DESCRIPTION
"Reflects the current TTL value (range from 1 to
255) for a remote traceroute operation.
Maximum TTL value is determined by
traceRouteCtlMaxTtl."
::= { traceRouteResultsEntry 2 }
traceRouteResultsCurProbeCount OBJECT-TYPE
SYNTAX Gauge32
UNITS "probes"
ACCESS read-only
STATUS current
DESCRIPTION
"Reflects the current probe count (1..10) for
a remote traceroute operation. The maximum
probe count is determined by
traceRouteCtlProbesPerHop."
::= { traceRouteResultsEntry 3 }
traceRouteResultsIpTgtAddrType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-only
STATUS current
DESCRIPTION
"This objects indicates the type of address stored
in the corresponding traceRouteResultsIpTgtAddr
object."
::= { traceRouteResultsEntry 4 }
traceRouteResultsIpTgtAddr OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS current
DESCRIPTION
"This objects reports the IP address associated
with a traceRouteCtlTargetAddress value when the
destination address is specified as a DNS name.
The value of this object should be a zero length
octet string when a DNS name is not specified or
when a specified DNS name fails to resolve."
::= { traceRouteResultsEntry 5 }
traceRouteResultsTestAttempts OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tests"
ACCESS read-only
STATUS current
DESCRIPTION
"The current number of attempts to determine a path
to a target. The value of this object MUST be started
at 0."
::= { traceRouteResultsEntry 6 }
traceRouteResultsTestSuccesses OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tests"
ACCESS read-only
STATUS current
DESCRIPTION
"The current number of attempts to determine a path
to a target that have succeeded. The value of this
object MUST be reported as 0 when no attempts have
succeeded."
::= { traceRouteResultsEntry 7 }
traceRouteResultsLastGoodPath OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the last complete path
was determined."
::= { traceRouteResultsEntry 8 }
-- Trace Route Probe History Table
traceRouteProbeHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRouteProbeHistoryEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Remote Operations Traceroute Results Table for
storing the results of a traceroute operation.
An implementation of this MIB will remove the oldest
entry in the traceRouteProbeHistoryTable to allow the
addition of an new entry once the number of rows in
the traceRouteProbeHistoryTable reaches the value specified
by traceRouteCtlMaxRows."
::= { pltMgmt 7 }
traceRouteProbeHistoryEntry OBJECT-TYPE
SYNTAX TraceRouteProbeHistoryEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of a traceroute
operation. Entries in this table are limited by
the value of the corresponding traceRouteCtlMaxRows
object.
The first two index elements identify the
traceRouteCtlEntry that a traceRouteProbeHistoryEntry
belongs to. The third index element selects a single
traceroute operation result. The fourth and fifth indexes
select the hop and the probe for a particular
traceroute operation."
INDEX {
traceRouteCtlServInstType,
traceRouteCtlServInstId,
traceRouteCtlOwnerIndex,
traceRouteCtlTestName,
traceRouteProbeHistoryIndex,
traceRouteProbeHistoryHopIndex,
traceRouteProbeHistoryProbeIndex
}
::= { traceRouteProbeHistoryTable 1 }
TraceRouteProbeHistoryEntry ::=
SEQUENCE {
traceRouteProbeHistoryIndex Unsigned32,
traceRouteProbeHistoryHopIndex Unsigned32,
traceRouteProbeHistoryProbeIndex Unsigned32,
traceRouteProbeHistoryHAddrType InetAddressType,
traceRouteProbeHistoryHAddr InetAddress,
traceRouteProbeHistoryResponse Unsigned32,
traceRouteProbeHistoryStatus OperationResponseStatus,
traceRouteProbeHistoryLastRC Integer32,
traceRouteProbeHistoryTime DateAndTime
}
traceRouteProbeHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..'ffffffff'h)
ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created when the result of
a traceroute probe is determined. The initial 2 instance
identifier index values identify the traceRouteCtlEntry
that a probe result (traceRouteProbeHistoryEntry) belongs
to. An entry is removed from this table when
its corresponding traceRouteCtlEntry is deleted.
An implementation MUST start assigning
traceRouteProbeHistoryIndex values at 1 and wrap after
exceeding the maximum possible value as defined by the
limit of this object ('ffffffff'h)."
::= { traceRouteProbeHistoryEntry 1 }
traceRouteProbeHistoryHopIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates which hop in a traceroute path that the probe's
results are for. The value of this object is initially
determined by the value of traceRouteCtlInitialTtl."
::= { traceRouteProbeHistoryEntry 2 }
traceRouteProbeHistoryProbeIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of a probe for a particular
hop in a traceroute path. The number of probes per
hop is determined by the value of the corresponding
traceRouteCtlProbesPerHop object."
::= { traceRouteProbeHistoryEntry 3 }
traceRouteProbeHistoryHAddrType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-only
STATUS current
DESCRIPTION
"This objects indicates the type of address stored
in the corresponding traceRouteProbeHistoryHAddr
object."
::= { traceRouteProbeHistoryEntry 4 }
traceRouteProbeHistoryHAddr OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS current
DESCRIPTION
"The address of a hop in a traceroute path. This object
is not allowed to be a DNS name. The value of the
corresponding object, traceRouteProbeHistoryHAddrType,
indicates this object's IP address type."
::= { traceRouteProbeHistoryEntry 5 }
traceRouteProbeHistoryResponse OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe."
::= { traceRouteProbeHistoryEntry 6 }
traceRouteProbeHistoryStatus OBJECT-TYPE
SYNTAX OperationResponseStatus
ACCESS read-only
STATUS current
DESCRIPTION
"The result of a traceroute operation made by a remote
host for a particular probe."
::= { traceRouteProbeHistoryEntry 7 }
traceRouteProbeHistoryLastRC OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS current
DESCRIPTION
"The last implementation method specific reply code received.
Traceroute is usually implemented by transmitting a series of
probe packets with increasing time-to-live values. A probe
packet is a UDP datagram encapsulated into an IP packet.
Each hop in a path to the target (destination) host rejects
the probe packets (probe's TTL too small, ICMP reply) until
either the maximum TTL is exceeded or the target host is
received."
::= { traceRouteProbeHistoryEntry 8 }
traceRouteProbeHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp for when this probe results were determined."
::= { traceRouteProbeHistoryEntry 9 }
-- Traceroute Hop Results Table
traceRouteHopsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRouteHopsEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Remote Operations Traceroute Hop Table for
keeping track of the results of traceroute tests on a
per hop basis."
::= { pltMgmt 8 }
traceRouteHopsEntry OBJECT-TYPE
SYNTAX TraceRouteHopsEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the traceRouteHopsTable.
The first two index elements identify the
traceRouteCtlEntry that a traceRouteHopsEntry
belongs to. The third index element,
traceRouteHopsHopIndex, selects a
hop in a traceroute path."
INDEX {
traceRouteCtlServInstType,
traceRouteCtlServInstId,
traceRouteCtlOwnerIndex,
traceRouteCtlTestName,
traceRouteHopsHopIndex
}
::= { traceRouteHopsTable 1 }
TraceRouteHopsEntry ::=
SEQUENCE {
traceRouteHopsHopIndex Unsigned32,
traceRouteHopsIpTgtAddressType InetAddressType,
traceRouteHopsIpTgtAddress InetAddress,
traceRouteHopsMinRtt Unsigned32,
traceRouteHopsMaxRtt Unsigned32,
traceRouteHopsAverageRtt Unsigned32,
traceRouteHopsRttSumOfSquares Unsigned32,
traceRouteHopsSentProbes Unsigned32,
traceRouteHopsProbeResponses Unsigned32,
traceRouteHopsLastGoodProbe DateAndTime
}
traceRouteHopsHopIndex OBJECT-TYPE
SYNTAX Unsigned32
ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the hop index for a traceroute hop. Values
for this object with respect to the same
traceRouteCtlOwnerIndex and traceRouteCtlTestName
MUST start at 1 and increase monotonically.
The traceRouteHopsTable keeps the current traceroute
path per traceRouteCtlEntry if enabled by
setting the corresponding traceRouteCtlCreateHopsEntries
to true(1).
All hops (traceRouteHopsTable entries) in a traceroute
path MUST be updated at the same time when a traceroute
operation completes. Care needs to be applied when either
a path changes or can't be determined. The initial portion
of the path, up to the first hop change, MUST retain the
same traceRouteHopsHopIndex values. The remaining portion
of the path SHOULD be assigned new traceRouteHopsHopIndex
values."
::= { traceRouteHopsEntry 1 }
traceRouteHopsIpTgtAddressType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-only
STATUS current
DESCRIPTION
"This objects indicates the type of address stored
in the corresponding traceRouteHopsIpTargetAddress
object."
::= { traceRouteHopsEntry 2 }
traceRouteHopsIpTgtAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS current
DESCRIPTION
"This object reports the IP address associated with
the hop. A value for this object should be reported
as a numeric IP address and not as a DNS name."
::= { traceRouteHopsEntry 3 }
traceRouteHopsMinRtt OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The minimum traceroute round-trip-time (RTT) received for
this hop. A value of 0 for this object implies that no
RTT has been received."
::= { traceRouteHopsEntry 4 }
traceRouteHopsMaxRtt OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum traceroute round-trip-time (RTT) received for
this hop. A value of 0 for this object implies that no
RTT has been received."
::= { traceRouteHopsEntry 5 }
traceRouteHopsAverageRtt OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The current average traceroute round-trip-time (RTT) for
this hop."
::= { traceRouteHopsEntry 6 }
traceRouteHopsRttSumOfSquares OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of all traceroute responses
received for this hop. Its purpose is to enable standard
deviation calculation."
::= { traceRouteHopsEntry 7 }
traceRouteHopsSentProbes OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object reflects the number of probes sent
for this hop during this traceroute test. The value of this
object should start at 0."
::= { traceRouteHopsEntry 8 }
traceRouteHopsProbeResponses OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses received for this hop during this
traceroute test. This value of this object should start
at 0."
::= { traceRouteHopsEntry 9 }
traceRouteHopsLastGoodProbe OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-only
STATUS current
DESCRIPTION
"Date and time was the last response was received for a probe
for this hop during this traceroute test."
::= { traceRouteHopsEntry 10 }
-- portOpModeSetup
portOpModeSetup OBJECT IDENTIFIER ::= { ves1616f35 24 }
-- portOpModePortTable
portOpModePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortOpModePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { portOpModeSetup 1 }
portOpModePortEntry OBJECT-TYPE
SYNTAX PortOpModePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portOpModePortTable."
INDEX { dot1dBasePort }
::= { portOpModePortTable 1 }
PortOpModePortEntry ::=
SEQUENCE {
portOpModePortSpeedDuplex INTEGER,
portOpModePortFlowCntl INTEGER,
portOpModePortName OCTET STRING,
portOpModePortModuleType INTEGER,
portOpModePortLinkUpType INTEGER,
portOpModePortIntrusionLock EnabledStatus,
portOpModePortLBTestSetup INTEGER,
portOpModePortLBTestStatus INTEGER,
portOpModePortSwCounterReset INTEGER,
portOpModePortVdslCounterReset INTEGER,
portOpModePortVdslStatus INTEGER
}
portOpModePortSpeedDuplex OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
speed_10_half(1),
speed_10_full(2),
speed_100_half(3),
speed_100_full(4),
speed_1000_full(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 1 }
portOpModePortFlowCntl OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 2 }
portOpModePortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 3 }
portOpModePortModuleType OBJECT-TYPE
SYNTAX INTEGER {
fast_ethernet_10_100(0),
gigabit_ethernet_100_1000(1),
vdsl(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 4 }
portOpModePortLinkUpType OBJECT-TYPE
SYNTAX INTEGER {
down(0),
copper(1),
fiber(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 5 }
portOpModePortIntrusionLock OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portOpModePortEntry 6 }
portOpModePortLBTestSetup OBJECT-TYPE
SYNTAX INTEGER {
internal_loopback_test(1),
external_loopback_test(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This entry display latest loopback test status of port while performing loopback test."
::= { portOpModePortEntry 7 }
portOpModePortLBTestStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
under_testing(1),
success(2),
fail(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This entry display latest loopback test status of port while performing loopback test."
::= { portOpModePortEntry 8 }
portOpModePortSwCounterReset OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This entry resets port SW counter."
::= { portOpModePortEntry 9 }
portOpModePortVdslCounterReset OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This entry resets port VDSL counter."
::= { portOpModePortEntry 10 }
portOpModePortVdslStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
standby(2),
showtime(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This entry reports VDSL link current status."
::= { portOpModePortEntry 11 }
-- portBasedVlanSetup
portBasedVlanSetup OBJECT IDENTIFIER ::= { ves1616f35 25 }
-- portBasedVlanPortListTable
portBasedVlanPortListTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortBasedVlanPortListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { portBasedVlanSetup 1 }
portBasedVlanPortListEntry OBJECT-TYPE
SYNTAX PortBasedVlanPortListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in portBasedVlanPortListTable."
INDEX { dot1dBasePort }
::= { portBasedVlanPortListTable 1 }
PortBasedVlanPortListEntry ::=
SEQUENCE {
portBasedVlanPortListMembers OCTET STRING
}
portBasedVlanPortListMembers OBJECT-TYPE
SYNTAX PortList
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { portBasedVlanPortListEntry 1 }
--fault MIB
faultMIB MODULE-IDENTITY
LAST-UPDATED "200411031200Z" -- YYYY/MM/DD, HH/MM
ORGANIZATION "ZyXEL"
CONTACT-INFO ""
DESCRIPTION
"Fault event table definitions"
::= { ves1616f35 26 }
-- **************************************************************************
-- Local Textual Conventions
-- **************************************************************************
UtcTimeStamp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Universal Time Coordinated as a 32-bit value that designates
the number of seconds since Jan 1, 1970 12:00AM."
SYNTAX Unsigned32
EventIdNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention describes the index that uniquely
identifies a fault event type in the entire system. Every fault
event type, e.g. link down, has a unique EventIdNumber."
SYNTAX Integer32
EventSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention describes the severity of a fault event.
The decreasing order of severity is shown in the textual
convention."
SYNTAX INTEGER{
critical (1),
major (2),
minor (3),
informational (4)
}
EventServiceAffective ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention indicates whether an event is immediately
service affecting or not."
SYNTAX INTEGER{
noServiceAffected (1),
serviceAffected (2)
}
InstanceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention describes the type of an instanceId
associated with each event and by that means specifies how
the instanceId variable should be intepreted.
Various instanceId types are specified below to enable fault
monitoring for different kind of devices from fixed
configuration pizza boxes to multi chassis nodes. All
instanceId types may not need to be used in every device
type.
Note also that instanceId semantics are element type dependent
(e.g. different kind of interface naming conventions may be used)
and thus instanceId usage may vary from element to element.
=========================================================================
Type Description Example form
of InstanceId
=========================================================================
unknown (1) unknown type - Irrelevant-
-------------------------------------------------------------------------
node (2) Associated with events originating from 1
the node. Used for general events that (Node number)
can not be associated with any specific
block. InstanceId value 1 is used for
single node equipment.
-------------------------------------------------------------------------
shelf (3) Associated with events originating from 1
the shelf. In the case of fixed (shelf number)
configuration devices this type is used
for events that are associated with the
physical enclosure, e.g. faults related
to fan etc. InstanceId value 1 is used
for single self equipment.
-------------------------------------------------------------------------
line (4) Associated with events originating from
physical interfaces or associated
components such as line cards.
InstanceId usage examples for faults
originating from:
- Physical port: Simply port number, e.g. .......1
-------------------------------------------------------------------------
switch (5) Associated with events originating from 1
from a switch chip or a switch card. (switch number)
For single switch equipment InstanceId
value 1 is used, for multi swich nodes
InstanceId semantics if for further
study.
-------------------------------------------------------------------------
lsp (6) Associated with events originating from 1
a particular lsp. (lsp index)
NOTE: In this case the InstanceName
contains the lsp name and InstanceId
contains lsp index.
-------------------------------------------------------------------------
l2Interface(7) Associated with events originating from - TBD -
a particular layer 2 interface. Used for
layer 2 related events such as L2 control
protocol faults. InstanceId semantics is
for further study.
-------------------------------------------------------------------------
l3Interface(8) Associated with events originating from - TBD -
a particular layer 3 interface. Used for
layer 3 related events such as L3 control
protocol faults. InstanceId semantics is
for further study.
-------------------------------------------------------------------------
rowIndex (9) Associated with events reporting about a
'logical' or conceptual table that consists
of rows. The Instance Id is the index/key
for a row in the table. The format of the
Instance Id will simply be a series of decimal
numbers seperated by a '.':
========================================================================="
SYNTAX INTEGER {
unknown (1),
node (2),
shelf (3),
line (4),
switch (5),
lsp (6),
l2Interface(7),
l3Interface(8),
rowIndex(9)
}
-- *****************************************************************************
-- Top level structure of this MIB.
-- *****************************************************************************
eventObjects OBJECT IDENTIFIER ::= { faultMIB 1 }
-- *****************************************************************************
-- Event Table
--
-- Event table reports all currently active fault events. Only normal type of
-- faults (i.e. faults that are not automatically and immediately cleared) are
-- present in the event table. Delta faults (i.e. faults that are automatically
-- cleared) are reported only by using trap messages.
-- *****************************************************************************
eventTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of currently active fault events. All faults
of normal type regardless of their severity level
are recorded in the event table. When a normal
type fault is cleared it is deleted from the event
table."
::= { eventObjects 1 }
eventEntry OBJECT-TYPE
SYNTAX EventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about an
event in the event table."
INDEX { eventSeqNum }
::= { eventTable 1 }
EventEntry ::=
SEQUENCE {
eventSeqNum Integer32,
eventEventId EventIdNumber,
eventName DisplayString,
eventInstanceType InstanceType,
eventInstanceId DisplayString,
eventInstanceName DisplayString,
eventSeverity EventSeverity,
eventSetTime UtcTimeStamp,
eventDescription DisplayString,
eventServAffective EventServiceAffective
}
eventSeqNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the sequence number of an event.
Sequence number is incremented monotonically starting
from 0 until it reaches its maximum and wraps around back
to 0.
Sequence number is incremented when
- the state of a normal type fault is set on (the same sequence
number is present in the events table as well as in the trap
that is sent to notify about the fault on event)
- delta event occurs (sequence number present in trap message)
- the state of a normal type fault is set off (sequence number
present in trap that is sent to notify for clearing)."
::= { eventEntry 1 }
eventEventId OBJECT-TYPE
SYNTAX EventIdNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the event ID which uniquely
identifies the event in the entire system."
::= { eventEntry 2 }
eventName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the name of the event, for
example 'Ethernet Link Down'"
::= { eventEntry 3 }
eventInstanceType OBJECT-TYPE
SYNTAX InstanceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the type of InstanceId of a
particular event in the event table. In brief
the instanceType refers to the type of sub-component
generating this event in the system, for example
switch (5). For more details see the textual
conventions section.
AFFECTS: eventInstanceId,
eventInstanceName"
::= { eventEntry 4 }
eventInstanceId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more details see
the textual conventions section.
DEPENDS ON: eventInstanceType"
::= { eventEntry 5 }
eventInstanceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is mainly used to store additional information
about the sub-component that is generating an event. For
example this field may specify what cooling fan is faulty.
DEPENDS ON: eventInstanceType"
::= { eventEntry 6 }
eventSeverity OBJECT-TYPE
SYNTAX EventSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable dictates the urgency of action when a event
occurs. There are four severity levels - Critical, Major,
Minor, and Informational. Critical events are those, which
require immediate operator intervention to prevent/reduce
system down time. Major events require quick attention and
Minor events possibly require some attention. Informational
events indicate the occurrence of events that may need to be
investigated."
::= { eventEntry 7 }
eventSetTime OBJECT-TYPE
SYNTAX UtcTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This table contains only normal events and this variable
represents the time when the event become active, i.e. the
number of seconds since Jan 1, 1970 12:00AM."
::= { eventEntry 8 }
eventDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable contains a description of the event and reasons
behind the event. This is a free format alpha-numeric string
that is set by the entity generating this event. This variable
may be empty if there is no usefull information to report.
The maximum length of this string is 255 characters."
::= { eventEntry 9 }
eventServAffective OBJECT-TYPE
SYNTAX EventServiceAffective
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates whether the event is service affective or not"
::= { eventEntry 10 }
-- fault Trap MIB
faultTrapsMIB MODULE-IDENTITY
LAST-UPDATED "200411011200Z" -- YYYY/MM/DD, HH/MM
ORGANIZATION "ZyXEL"
CONTACT-INFO ""
DESCRIPTION
"Fault event trap definitions"
::= { ves1616f35 27 }
trapInfoObjects OBJECT IDENTIFIER ::= { faultTrapsMIB 1}
trapNotifications OBJECT IDENTIFIER ::= { faultTrapsMIB 2}
-- **************************************************************************
-- Local Textual Conventions
-- **************************************************************************
EventPersistence ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention indicates whether the event is delta
(automatically and immediately cleared) or normal (not
automatically cleared)."
SYNTAX INTEGER{
normal (1),
delta (2)
}
-- **************************************************************************
-- Trap information object definitions
-- **************************************************************************
trapRefSeqNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the former sequence number of a cleared event
in the event table. Not intended to read but only used in
trap notifications."
::= { trapInfoObjects 1 }
trapPersistence OBJECT-TYPE
SYNTAX EventPersistence
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the event is delta (automatically and
immediately cleared) or normal (not automatically cleared).
Not intended to read but only used in trap notifications."
::= { trapInfoObjects 2 }
trapSenderNodeId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the node ID of the sending network element. If not
supported should be set to 0. Not intended to read but only
used in trap notifications."
::= { trapInfoObjects 3 }
-- ***************************************************************************
-- Trap definitions
-- ***************************************************************************
eventOnTrap NOTIFICATION-TYPE
OBJECTS {
eventSeqNum,
eventEventId,
eventName,
eventSetTime,
eventSeverity,
eventInstanceType,
eventInstanceId,
eventInstanceName,
eventServAffective,
eventDescription,
trapPersistence,
trapSenderNodeId,
sysObjectID}
STATUS current
DESCRIPTION
"This trap is used to inform network management system that a delta
fault event (events that are automatically cleared) has occured
or a normal fault event (not automatically cleared) state has
been set on.
Objects are used as follows:
- eventSeqNum is the sequence number of the event. For normal
type of events must equal to the sequence number of the event
in the events table.
- eventEventId specifies what fault event has occured.
- eventName specifies the name of the fault event.
- eventSetTime indicates when fault event has occured
(delta events) or when fault has been set on (normal events).
- eventSeverity reports the severity level of the event.
- eventInstanceType indicates what kind of object is faulty.
- eventInstanceId specifies what instance is faulty.
- eventInstanceName may contain textual description for
the faulty object.
- eventServAffective specifies whether the event is
immediately service affcetive.
- eventDescription reports possible additional information about the event.
- trapPersistence tells whether this event is a delta or normal event.
- trapSenderNodeId specifies the node ID of the sending network element if
configuring it is supported for the network element, otherwise 0.
- sysObjectID specifies what kind of equipment reports the fault event.
For more information see the eventTable specification"
::= { trapNotifications 1 }
eventClearedTrap NOTIFICATION-TYPE
OBJECTS {
eventSeqNum,
eventEventId,
eventSetTime,
eventInstanceType,
eventInstanceId,
trapRefSeqNum,
trapSenderNodeId,
sysObjectID}
STATUS current
DESCRIPTION
"This trap is used to inform network management system that a normal
type fault event has been cleared (state set off).
Objects are used as follows:
- eventSeqNum is the sequence number of the this clearing event. Note that
the sequence number of the cleared event is reported in the trapRefSeqNum
object.
- eventEventId specifies what event has been cleared.
- eventSetTime indicates when fault event has been cleared.
- eventInstanceType indicates what kind of object has been
faulty.
- eventInstanceId specifies what instance has been faulty.
- trapRefSeqNum specifies the sequence number of the cleared event (i.e.
the sequence number was assigned for the event in the events table).
- trapSenderNodeId specifies the node ID of the sending network element if
configuring it is supported for the network element, otherwise 0.
- sysObjectID specifies what kind of equipment reports the clearing event.
For more information see the eventTable specification"
::= { trapNotifications 2 }
-- multicastPortSetup
multicastPortSetup OBJECT IDENTIFIER ::= { ves1616f35 28 }
multicastPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastPortSetup 1 }
multicastPortEntry OBJECT-TYPE
SYNTAX MulticastPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in multicastPortTable."
INDEX { dot1dBasePort }
::= { multicastPortTable 1 }
MulticastPortEntry ::=
SEQUENCE {
multicastPortImmediateLeave EnabledStatus,
multicastPortMaxGroupLimited EnabledStatus,
multicastPortMaxOfGroup INTEGER,
multicastPortIgmpFilteringProfile DisplayString,
multicastPortQueryMode INTEGER
}
multicastPortImmediateLeave OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { multicastPortEntry 1 }
multicastPortMaxGroupLimited OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { multicastPortEntry 2 }
multicastPortMaxOfGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0..255"
::= { multicastPortEntry 3 }
multicastPortIgmpFilteringProfile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { multicastPortEntry 4 }
multicastPortQueryMode OBJECT-TYPE
SYNTAX INTEGER {
auto_mode(1),
fix_mode(2),
edge_mode(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { multicastPortEntry 5 }
-- multicastStatus
multicastStatus OBJECT IDENTIFIER ::= { ves1616f35 29 }
multicastStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { multicastStatus 1 }
igmpCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpCountEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A count table of igmp query/report/leave message."
::= { multicastStatus 2 }
multicastStatusEntry OBJECT-TYPE
SYNTAX MulticastStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in multicastStatusTable."
INDEX { multicastStatusVlanID, multicastStatusPort, multicastStatusGroup }
::= { multicastStatusTable 1 }
MulticastStatusEntry ::=
SEQUENCE {
multicastStatusIndex INTEGER,
multicastStatusVlanID INTEGER,
multicastStatusPort INTEGER,
multicastStatusGroup IpAddress
}
multicastStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastStatusEntry 1 }
multicastStatusVlanID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastStatusEntry 2 }
multicastStatusPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastStatusEntry 3 }
multicastStatusGroup OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { multicastStatusEntry 4 }
-- test igmpcount
igmpCountEntry OBJECT-TYPE
SYNTAX IgmpCountEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in igmpCountTable."
INDEX { igmpCountIndex }
::= { igmpCountTable 1 }
IgmpCountEntry ::=
SEQUENCE {
igmpCountIndex INTEGER,
igmpCountInQuery INTEGER,
igmpCountInReport INTEGER,
igmpCountInLeave INTEGER,
igmpCountInQueryDrop INTEGER,
igmpCountInReportDrop INTEGER,
igmpCountInLeaveDrop INTEGER,
igmpCountOutQuery INTEGER,
igmpCountOutReport INTEGER,
igmpCountOutLeave INTEGER
}
igmpCountIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of IgmpCountEntry. 0 means total count in whole system"
::= { igmpCountEntry 1 }
igmpCountInQuery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 2 }
igmpCountInReport OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 3 }
igmpCountInLeave OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 4 }
igmpCountInQueryDrop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 5 }
igmpCountInReportDrop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 6 }
igmpCountInLeaveDrop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 7 }
igmpCountOutQuery OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 8 }
igmpCountOutReport OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 9 }
igmpCountOutLeave OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpCountEntry 10 }
--
-- igmpFilteringProfileSetup
igmpFilteringProfileSetup OBJECT IDENTIFIER ::= { ves1616f35 30 }
igmpFilteringMaxNumberOfProfile OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileSetup 1 }
igmpFilteringProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFilteringProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileSetup 2 }
igmpFilteringProfileEntry OBJECT-TYPE
SYNTAX IgmpFilteringProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in igmpFilteringProfileTable."
INDEX { igmpFilteringProfileName, igmpFilteringProfileStartAddress, igmpFilteringProfileEndAddress }
::= { igmpFilteringProfileTable 1 }
IgmpFilteringProfileEntry ::=
SEQUENCE {
igmpFilteringProfileName DisplayString,
igmpFilteringProfileStartAddress IpAddress,
igmpFilteringProfileEndAddress IpAddress,
igmpFilteringProfileRowStatus RowStatus
}
igmpFilteringProfileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileEntry 1 }
igmpFilteringProfileStartAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileEntry 2 }
igmpFilteringProfileEndAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileEntry 3 }
igmpFilteringProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { igmpFilteringProfileEntry 4 }
-- MVRSetup
mvrSetup OBJECT IDENTIFIER ::= { ves1616f35 31 }
maxNumberOfMVR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 1 }
mvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 2 }
mvrEntry OBJECT-TYPE
SYNTAX MvrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mvrTable."
INDEX { mvrVlanID }
::= { mvrTable 1 }
MvrEntry ::=
SEQUENCE {
mvrVlanID INTEGER,
mvrName DisplayString,
mvrMode INTEGER,
mvrRowStatus RowStatus
}
mvrVlanID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"1..4094"
::= { mvrEntry 1 }
mvrName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrEntry 2 }
mvrMode OBJECT-TYPE
SYNTAX INTEGER {
dynamic(0),
compatible(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrEntry 3 }
mvrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { mvrEntry 4 }
mvrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 3 }
mvrPortEntry OBJECT-TYPE
SYNTAX MvrPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mvrPortTable."
INDEX { mvrVlanID, dot1dBasePort }
::= { mvrPortTable 1 }
MvrPortEntry ::=
SEQUENCE {
mvrPortRole INTEGER,
mvrPortTagging EnabledStatus
}
mvrPortRole OBJECT-TYPE
SYNTAX INTEGER {
none(1),
source_port(2),
receiver_port(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrPortEntry 1 }
mvrPortTagging OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrPortEntry 2 }
maxNumberOfMvrGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 4 }
mvrGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { mvrSetup 5 }
mvrGroupEntry OBJECT-TYPE
SYNTAX MvrGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in mvrGroupTable."
INDEX { mvrVlanID, mvrGroupName }
::= { mvrGroupTable 1 }
MvrGroupEntry ::=
SEQUENCE {
mvrGroupName DisplayString,
mvrGroupStartAddress IpAddress,
mvrGroupEndAddress IpAddress,
mvrGroupRowStatus RowStatus
}
mvrGroupName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { mvrGroupEntry 1 }
mvrGroupStartAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrGroupEntry 2 }
mvrGroupEndAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { mvrGroupEntry 3 }
mvrGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { mvrGroupEntry 4 }
-- clusterSetup
clusterSetup OBJECT IDENTIFIER ::= { ves1616f35 32 }
-- clusterManager
clusterManager OBJECT IDENTIFIER ::= { clusterSetup 1 }
clusterMaxNumOfManager OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterManager 1 }
-- clusterManagerTable
clusterManagerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClusterManagerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { clusterManager 2 }
clusterManagerEntry OBJECT-TYPE
SYNTAX ClusterManagerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in clusterManagerTable."
INDEX { clusterManagerVid }
::= { clusterManagerTable 1 }
ClusterManagerEntry ::=
SEQUENCE {
clusterManagerVid INTEGER,
clusterManagerName DisplayString,
clusterManagerRowStatus RowStatus
}
clusterManagerVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterManagerEntry 1 }
clusterManagerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { clusterManagerEntry 2 }
clusterManagerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { clusterManagerEntry 3 }
-- clusterMembers
clusterMembers OBJECT IDENTIFIER ::= { clusterSetup 2 }
clusterMaxNumOfMember OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterMembers 1 }
-- clusterMemberTable
clusterMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClusterMemberEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { clusterMembers 2 }
clusterMemberEntry OBJECT-TYPE
SYNTAX ClusterMemberEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in clusterMemberTable."
INDEX { clusterMemberMac }
::= { clusterMemberTable 1 }
ClusterMemberEntry ::=
SEQUENCE {
clusterMemberMac MacAddress,
clusterMemberName DisplayString,
clusterMemberModel DisplayString,
clusterMemberPassword DisplayString,
clusterMemberRowStatus RowStatus
}
clusterMemberMac OBJECT-TYPE
SYNTAX MacAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { clusterMemberEntry 1 }
clusterMemberName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterMemberEntry 2 }
clusterMemberModel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterMemberEntry 3 }
clusterMemberPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { clusterMemberEntry 4 }
clusterMemberRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { clusterMemberEntry 5 }
-- clusterCandidates
clusterCandidates OBJECT IDENTIFIER ::= { clusterSetup 3 }
-- clusterCandidateTable
clusterCandidateTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClusterCandidateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { clusterCandidates 1 }
clusterCandidateEntry OBJECT-TYPE
SYNTAX ClusterCandidateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in clusterCandidateTable."
INDEX { clusterCandidateMac }
::= { clusterCandidateTable 1 }
ClusterCandidateEntry ::=
SEQUENCE {
clusterCandidateMac MacAddress,
clusterCandidateName DisplayString,
clusterCandidateModel DisplayString
}
clusterCandidateMac OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterCandidateEntry 1 }
clusterCandidateName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterCandidateEntry 2 }
clusterCandidateModel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterCandidateEntry 3 }
-- clusterStatus
clusterStatus OBJECT IDENTIFIER ::= { clusterSetup 4 }
clusterStatusRole OBJECT-TYPE
SYNTAX INTEGER {
none(0),
manager(1),
member(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterStatus 1 }
clusterStatusManager OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterStatus 2 }
clsuterStatusMaxNumOfMember OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterStatus 3 }
-- clusterStatusMemberTable
clusterStatusMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClusterStatusMemberEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { clusterStatus 4 }
clusterStatusMemberEntry OBJECT-TYPE
SYNTAX ClusterStatusMemberEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in clusterStatusMemberTable."
INDEX { clusterStatusMemberMac }
::= { clusterStatusMemberTable 1 }
ClusterStatusMemberEntry ::=
SEQUENCE {
clusterStatusMemberMac MacAddress,
clusterStatusMemberName DisplayString,
clusterStatusMemberModel DisplayString,
clusterStatusMemberStatus INTEGER
}
clusterStatusMemberMac OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterStatusMemberEntry 1 }
clusterStatusMemberName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterStatusMemberEntry 2 }
clusterStatusMemberModel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterStatusMemberEntry 3 }
clusterStatusMemberStatus OBJECT-TYPE
SYNTAX INTEGER {
error(0),
online(1),
offline(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { clusterStatusMemberEntry 4 }
-- sysLogSetup
sysLogSetup OBJECT IDENTIFIER ::= { ves1616f35 33 }
sysLogState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"sysLog enabled/disabled for the switch."
::= { sysLogSetup 1 }
-- sysLogTypeTable
sysLogTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysLogTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogSetup 2 }
sysLogTypeEntry OBJECT-TYPE
SYNTAX SysLogTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in sysLogTypeTable."
INDEX { sysLogTypeIndex }
::= { sysLogTypeTable 1 }
SysLogTypeEntry ::=
SEQUENCE {
sysLogTypeIndex INTEGER,
sysLogTypeName DisplayString,
sysLogTypeState EnabledStatus,
sysLogTypeFacility INTEGER
}
sysLogTypeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogTypeEntry 1 }
sysLogTypeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sysLogTypeEntry 2 }
sysLogTypeState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sysLogTypeEntry 3 }
sysLogTypeFacility OBJECT-TYPE
SYNTAX INTEGER {
local_user0(0),
local_user1(1),
local_user2(2),
local_user3(3),
local_user4(4),
local_user5(5),
local_user6(6),
local_user7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sysLogTypeEntry 4 }
-- sysLogServerTable
sysLogServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysLogServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogSetup 3 }
sysLogServerEntry OBJECT-TYPE
SYNTAX SysLogServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in sysLogServerTable."
INDEX { sysLogServerAddress }
::= { sysLogServerTable 1 }
SysLogServerEntry ::=
SEQUENCE {
sysLogServerAddress IpAddress,
sysLogServerLogLevel INTEGER,
sysLogServerRowStatus RowStatus
}
sysLogServerAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sysLogServerEntry 1 }
sysLogServerLogLevel OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level0-1(1),
level0-2(2),
level0-3(3),
level0-4(4),
level0-5(5),
level0-6(6),
level0-7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sysLogServerEntry 2 }
sysLogServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { sysLogServerEntry 3 }
-- diffservSetup
diffservSetup OBJECT IDENTIFIER ::= { ves1616f35 34 }
diffservState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { diffservSetup 1 }
-- diffservMapTable
diffservMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffservMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { diffservSetup 2 }
diffservMapEntry OBJECT-TYPE
SYNTAX DiffservMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in diffservMapTable."
INDEX { diffservMapDscp }
::= { diffservMapTable 1 }
DiffservMapEntry ::=
SEQUENCE {
diffservMapDscp INTEGER,
diffservMapPriority INTEGER
}
diffservMapDscp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"0-63"
::= { diffservMapEntry 1 }
diffservMapPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-7"
::= { diffservMapEntry 2 }
-- diffservPortTable
diffservPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffservPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { diffservSetup 3 }
diffservPortEntry OBJECT-TYPE
SYNTAX DiffservPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in diffservPortTable."
INDEX { dot1dBasePort }
::= { diffservPortTable 1 }
DiffservPortEntry ::=
SEQUENCE {
diffservPortState EnabledStatus
}
diffservPortState OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { diffservPortEntry 1 }
-- vdslMiscSetup
vdslMiscSetup OBJECT IDENTIFIER ::= { ves1616f35 35 }
vdslMaxNumberOfLineProfile OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of VDSL line profile."
::= { vdslMiscSetup 1 }
vdslMaxNumberOfAlarmProfile OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of VDSL alarm profile."
::= { vdslMiscSetup 2 }
-- vdslLineProfileExtendedTable
vdslLineProfileExtendedTable OBJECT-TYPE
SYNTAX SEQUENCE OF VdslLineProfileExtendedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vdslMiscSetup 3 }
vdslLineProfileExtendedEntry OBJECT-TYPE
SYNTAX VdslLineProfileExtendedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in DSCP Table."
INDEX { vdslLineConfProfileName }
::= { vdslLineProfileExtendedTable 1 }
VdslLineProfileExtendedEntry ::=
SEQUENCE {
vdslLineConfHamBandMaskExtended BITS
}
vdslLineConfHamBandMaskExtended OBJECT-TYPE
SYNTAX BITS
{
amateurBandIndex0(0), -- amateur radio band notch
amateurBandIndex1(1), -- amateur radio band notch
amateurBandIndex2(2), -- amateur radio band notch
amateurBandIndex3(3), -- amateur radio band notch
amateurBandIndex4(4), -- amateur radio band notch
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"BandIndex Start Frequency Stop Frequency
--------- ------------------ --------------------------------
0 14000 kHz 14350 kHz
1 18068 kHz 18168 kHz
2 21000 kHz 21450 kHz
3 24890 kHz 24990 kHz
4 28000 kHz 29700 kHz"
::= { vdslLineProfileExtendedEntry 1 }
vdslMaxNumberOfDownStreamTxPSDBreakPoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of VDSL DownStream TxPSD breakpoint."
::= { vdslMiscSetup 4 }
vdslMaxNumberOfUpStreamTxPSDBreakPoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of VDSL UpStream TxPSD breakpoint."
::= { vdslMiscSetup 5 }
-- vdslLineExtendedTable
vdslLineExtendedTable OBJECT-TYPE
SYNTAX SEQUENCE OF VdslLineExtendedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vdslMiscSetup 6 }
vdslLineExtendedEntry OBJECT-TYPE
SYNTAX VdslLineExtendedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { ifIndex }
::= { vdslLineExtendedTable 1 }
VdslLineExtendedEntry ::=
SEQUENCE {
vdslLinePsdProfile DisplayString
}
vdslLinePsdProfile OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object identifies the row in the VDSL
Line Psd Configuration Profile,
vdslLinePsdProfile, which applies to this
VDSL line, and channels if applicable."
::= { vdslLineExtendedEntry 1 }
-- vdslLineTxPSDTable
vdslLineTxPSDTable OBJECT-TYPE
SYNTAX SEQUENCE OF VdslLineTxPSDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vdslMiscSetup 7 }
vdslLineTxPSDEntry OBJECT-TYPE
SYNTAX VdslLineTxPSDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { vdslLineConfProfileName, vdslPhysSide, vdslLineTxPSDFreq }
::= { vdslLineTxPSDTable 1 }
VdslLineTxPSDEntry ::=
SEQUENCE {
vdslLineTxPSDProfileName DisplayString,
vdslLineTxPSDFreq INTEGER,
vdslLineTxPSDLevel INTEGER,
vdslLineTxPSDRowstatus RowStatus
}
vdslLineTxPSDProfileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ProfileName of vdslLineTxPSD"
::= { vdslLineTxPSDEntry 1 }
vdslLineTxPSDFreq OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The frequency bands can be modified if desired, as long as the end frequency of one band and the begin
frequency of the next band cannot be same or overlapped, and they should be different by at least 1 tone
or 4.3125 kHz(or 8kHz for integer). Units: 1 kHz, Size list: 0..30000"
::= { vdslLineTxPSDEntry 2 }
vdslLineTxPSDLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies PSD level value
level in the range (in -0.1 dBm/Hz) 125 to 1400 dBm/Hz."
::= { vdslLineTxPSDEntry 3 }
vdslLineTxPSDRowstatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Row Status for TxPSD"
::= { vdslLineTxPSDEntry 4 }
-- vturInfo
vturInfo OBJECT IDENTIFIER ::= { ves1616f35 36 }
-- vturInfoTable
vturInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VturInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { vturInfo 1 }
vturInfoEntry OBJECT-TYPE
SYNTAX VturInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in vturInfoTable."
INDEX { dot1dBasePort }
::= { vturInfoTable 1 }
VturInfoEntry ::=
SEQUENCE {
vturName DisplayString,
vturSysVersion DisplayString,
vturModemCodeVersion DisplayString
}
vturName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display remote device name"
::= { vturInfoEntry 1 }
vturSysVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display remote device system version info"
::= { vturInfoEntry 2 }
vturModemCodeVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Display remote device VDSL modem code version info"
::= { vturInfoEntry 3 }
-- protocol-based VLAN
protoBasedVlanSetup OBJECT IDENTIFIER ::= { ves1616f35 37 }
protoBasedVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProtoBasedVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanSetup 1 }
protoBasedVlanEntry OBJECT-TYPE
SYNTAX ProtoBasedVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in protoBasedVlanTable."
INDEX { protoBasedVlanPort, protoBasedVlanPacketType, protoBasedVlanEtherType }
::= { protoBasedVlanTable 1 }
ProtoBasedVlanEntry ::=
SEQUENCE {
protoBasedVlanPort INTEGER,
protoBasedVlanPacketType INTEGER,
protoBasedVlanEtherType INTEGER,
protoBasedVlanName DisplayString,
protoBasedVlanVid INTEGER,
protoBasedVlanPriority INTEGER,
protoBasedVlanState RowStatus
}
protoBasedVlanPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 1 }
protoBasedVlanPacketType OBJECT-TYPE
SYNTAX INTEGER {
etherII(1),
snap(2),
llc(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 2 }
protoBasedVlanEtherType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 3 }
protoBasedVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 4 }
protoBasedVlanVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 5 }
protoBasedVlanPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 6 }
protoBasedVlanState OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
""
::= { protoBasedVlanEntry 7 }
-- classifierSetup
classifierSetup OBJECT IDENTIFIER ::= { ves1616f35 38 }
classifierRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClassifierRuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { classifierSetup 1 }
classifierRuleEntry OBJECT-TYPE
SYNTAX ClassifierRuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in classifierRuleTable."
INDEX {classifierName }
::= { classifierRuleTable 1 }
ClassifierRuleEntry ::=
SEQUENCE {
classifierName DisplayString,
classifierEnable INTEGER,
classifierPacketFormat INTEGER,
classifierVlanId INTEGER,
classifier8021pPriority INTEGER,
classifierEtherType INTEGER,
classifierSrcMAC MacAddress,
classifierIncomingPort INTEGER,
classifierDstMAC MacAddress,
classifierDSCP INTEGER,
classifierIpProtocol INTEGER,
classifierEstablishOnly INTEGER,
classifierSrcIp IpAddress,
classifierSrcIpMask INTEGER,
classifierSrcSocket INTEGER,
classifierDstIp IpAddress,
classifierDstIpMask INTEGER,
classifierDstSocket INTEGER,
classifierRowstatus RowStatus
}
classifierName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of classifier rule."
::= { classifierRuleEntry 1 }
classifierEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Classifier rule enabled/disabled."
::= { classifierRuleEntry 2 }
classifierPacketFormat OBJECT-TYPE
SYNTAX INTEGER
{
all(1),
ethernetII-untagged(2),
ethernetII-tagged(3),
ethernet802_3-untagged(4),
ethernet802_3-tagged(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Packet format for classifier rule. All(1), 802.3 untagged(2), 802.3 tagged(3), EthernetII untagged(4), EthernetII tagged(5)."
::= { classifierRuleEntry 3 }
classifierVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Vlan id for classifer rule, 1~4094."
::= { classifierRuleEntry 4 }
classifier8021pPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1p priority for classifier rule, 0~7."
::= { classifierRuleEntry 5 }
classifierEtherType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ether type for classifier rule, in decimal expression."
::= { classifierRuleEntry 6 }
classifierSrcMAC OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source mac address for classifier rule"
::= { classifierRuleEntry 7 }
classifierIncomingPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Incoming Port for classifier rule"
::= { classifierRuleEntry 8 }
classifierDstMAC OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination mac address for classifier rule"
::= { classifierRuleEntry 9 }
classifierDSCP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DSCP for classifier rule"
::= { classifierRuleEntry 10 }
classifierIpProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP Protocol for classifier rule"
::= { classifierRuleEntry 11 }
classifierEstablishOnly OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP Protocol for EstablishOnly for classifier rule"
::= { classifierRuleEntry 12 }
classifierSrcIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP address for classifier rule"
::= { classifierRuleEntry 13 }
classifierSrcIpMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP Mask for classifier rule"
::= { classifierRuleEntry 14 }
classifierSrcSocket OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source Socket Number for classifier rule"
::= { classifierRuleEntry 15 }
classifierDstIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP address for classifier rule"
::= { classifierRuleEntry 16 }
classifierDstIpMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP Mask for classifier rule"
::= { classifierRuleEntry 17 }
classifierDstSocket OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination Socket Number for classifier rule"
::= { classifierRuleEntry 18 }
classifierRowstatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Row Status for classifier rule"
::= { classifierRuleEntry 19 }
-- policySetup
policySetup OBJECT IDENTIFIER ::= { ves1616f35 39 }
policyTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolicyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { policySetup 1 }
policyEntry OBJECT-TYPE
SYNTAX PolicyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An entry in policyTable."
INDEX {policyName }
::= { policyTable 1 }
PolicyEntry ::=
SEQUENCE {
policyName DisplayString,
policyEnable INTEGER,
policyClassifier DisplayString,
policyVlanId INTEGER,
policyEgressPort INTEGER,
policyOutPktFormat INTEGER,
policy8021pPriority INTEGER,
policyDSCP INTEGER,
policyTOS INTEGER,
policyBandwidth INTEGER,
policyOutOfProfileDSCP INTEGER,
policyForwardingAction INTEGER,
policyPriorityAction INTEGER,
policyDiffServAction INTEGER,
policyOutgoingAction BITS,
policyMeteringEnable INTEGER,
policyOutOfProfileAction BITS,
policyRowstatus RowStatus
}
policyName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of policy rule."
::= { policyEntry 1 }
policyEnable OBJECT-TYPE
SYNTAX EnabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Policy rule enabled/disabled."
::= { policyEntry 2 }
policyClassifier OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Classifier of policy rule."
::= { policyEntry 3 }
policyVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Vlan id for policy rule, 1~4094."
::= { policyEntry 4 }
policyEgressPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress Port for policy rule"
::= { policyEntry 5 }
policyOutPktFormat OBJECT-TYPE
SYNTAX INTEGER
{
tag(1),
untag(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Outgoing packet format for Egress port for policy rule"
::= { policyEntry 6 }
policy8021pPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1p priority for policy rule, 0~7."
::= { policyEntry 7 }
policyDSCP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DSCP for policy rule."
::= { policyEntry 8 }
policyTOS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TOS for policy rule, 0~7"
::= { policyEntry 9 }
policyBandwidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bandwidth for policy rule"
::= { policyEntry 10 }
policyOutOfProfileDSCP OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Out Of Profile DSCP for policy rule."
::= { policyEntry 11 }
policyForwardingAction OBJECT-TYPE
SYNTAX INTEGER
{
no-change(1),
discard-the-packet(2),
do-not-drop-the-matching-frame-previously-marked-for-dopping(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Forwarding Action for policy rule"
::= { policyEntry 12 }
policyPriorityAction OBJECT-TYPE
SYNTAX INTEGER
{
no-change(1),
set-the-packets-802_1-priority(2),
send-the-packet-to-priority-queue(3),
replace-the-802_1-priority-field-with-the-IP-TOS-value(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Priority Action for policy rule"
::= { policyEntry 13}
policyDiffServAction OBJECT-TYPE
SYNTAX INTEGER
{
no-change(1),
set-the-packets-TOS-field(2),
replace-the-IP-TOS-field-with-the-802_1-priority-value(3),
set-the-Diffserv-Codepoint-field-in-the-frame(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DiffServ Action for policy rule"
::= { policyEntry 14}
policyOutgoingAction OBJECT-TYPE
SYNTAX BITS {
send-the-packet-to-the-mirror-port(1),
send-the-packet-to-the-egress-port(2),
send-the-matching-frames-to-the-egress-port(3),
set-the-packets-VLAN-ID(4)
}
ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing Action for policy rule"
::= { policyEntry 15 }
policyMeteringEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Metering for Policy rule enabled/disabled."
::= { policyEntry 16 }
policyOutOfProfileAction OBJECT-TYPE
SYNTAX BITS {
drop-the-packet(1),
change-the-DSCP-value(2),
set-Out-Drop-Precedence(3),
do-not-drop-the-matching-frame-previously-marked-for-dropping(4)
}
ACCESS read-create
STATUS current
DESCRIPTION
"Out Of Profile Action for policy rule"
::= { policyEntry 17 }
policyRowstatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-create
STATUS mandatory
DESCRIPTION
"Row Status for policy rule"
::= { policyEntry 18 }
END
View Git Blame Copy Permalink