1649 lines
69 KiB
Plaintext
1649 lines
69 KiB
Plaintext
-- ZyXEL Communications Corporation
|
|
-- Private Enterprise MIB definition
|
|
|
|
-- $Log: zyxel-VDSL.mib $
|
|
-- Revision 1.2 2002/11/12 07:45:14 jennyhsu
|
|
-- Revision 1.1 2002/11/12 07:40:52 jennyhsu
|
|
-- Initial revision
|
|
|
|
|
|
ZYXEL-VDSLLINE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
vesSeriesCommon FROM ZYXEL-MIB
|
|
Gauge, Counter, TimeTicks FROM RFC1155-SMI
|
|
OBJECT-TYPE FROM RFC-1212
|
|
DisplayString FROM RFC1213-MIB
|
|
RowStatus FROM SNMPv2-TC;
|
|
|
|
accessSwitchVdslLineMib OBJECT IDENTIFIER ::= { vesSeriesCommon 1 }
|
|
|
|
accessSwitchVdslLineMibObjects OBJECT IDENTIFIER ::= { accessSwitchVdslLineMib 1 }
|
|
|
|
accessSwitchVdslLCSMib OBJECT IDENTIFIER ::= { accessSwitchVdslLineMib 2 }
|
|
|
|
accessSwitchVdslLCSMibObjects OBJECT IDENTIFIER ::= { accessSwitchVdslLCSMib 1 }
|
|
|
|
accessSwitchVdslLCSQam OBJECT IDENTIFIER ::= { accessSwitchVdslLCSMib 2 }
|
|
|
|
|
|
-- accessSwitch VDSL Line Table
|
|
|
|
accessSwitchVdslLineTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslLineEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table includes common attributes describing both ends of the line."
|
|
::= { accessSwitchVdslLineMibObjects 1 }
|
|
|
|
accessSwitchVdslLineEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslLineEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the accessSwitchVdslLineTable."
|
|
INDEX { ifIndex }
|
|
::= { accessSwitchVdslLineTable 1 }
|
|
|
|
AccessSwitchVdslLineEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslLineCoding INTEGER,
|
|
accessSwitchVdslLineDiscCount Counter,
|
|
accessSwitchVdslLineConfProfile DisplayString
|
|
}
|
|
|
|
accessSwitchVdslLineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
dmt(2), -- Discrete MultiTone
|
|
cap(3), -- Carrierless Amplitude & Phase modulation
|
|
qam(4) -- Quadrature Amplitude Modulation
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the VDSL coding type used on this line."
|
|
::= { accessSwitchVdslLineEntry 1 }
|
|
|
|
accessSwitchVdslLineDiscCount OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of disconnection failures since agent reset."
|
|
::= { accessSwitchVdslLineEntry 2 }
|
|
|
|
accessSwitchVdslLineConfProfile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of this object identifies the row
|
|
in the VDSL Line Configuration Profile Table,
|
|
(accessSwitchVdslLineConfProfileTable), which applies for this
|
|
VDSL line."
|
|
::= { accessSwitchVdslLineEntry 3 }
|
|
|
|
|
|
-- accessSwitch VDSL VTU-O Physical Table
|
|
|
|
accessSwitchVdslVtuoPhysTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslVtuoPhysEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides one row for each VTU-O.
|
|
Each row contains the physical layer parameters for that VTU-O."
|
|
::= { accessSwitchVdslLineMibObjects 2 }
|
|
|
|
accessSwitchVdslVtuoPhysEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslVtuoPhysEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the accessSwitchVdslVtuoPhysTable."
|
|
INDEX { ifIndex }
|
|
::= { accessSwitchVdslVtuoPhysTable 1 }
|
|
|
|
AccessSwitchVdslVtuoPhysEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslVtuoCurrSnrMgn INTEGER,
|
|
accessSwitchVdslVtuoCurrMse INTEGER,
|
|
accessSwitchVdslVtuoCurrPsd INTEGER,
|
|
accessSwitchVdslVtuoCurrRsErr Counter,
|
|
accessSwitchVdslVtuoCurrAtn Gauge,
|
|
accessSwitchVdslVtuoCurrOutputPwr INTEGER,
|
|
accessSwitchVdslVtuoCurrRate INTEGER,
|
|
accessSwitchVdslVtuoCurrAttainableRate Gauge,
|
|
accessSwitchVdslVtuoCurrStatus INTEGER
|
|
}
|
|
|
|
accessSwitchVdslVtuoCurrSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin as seen by this VTU with respect to its
|
|
received signal in 0.01dB."
|
|
::= { accessSwitchVdslVtuoPhysEntry 1 }
|
|
|
|
accessSwitchVdslVtuoCurrMse OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minimum Square Error as seen by this VTU with respect to its
|
|
received signal in 0.01dB."
|
|
::= { accessSwitchVdslVtuoPhysEntry 2 }
|
|
|
|
accessSwitchVdslVtuoCurrPsd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Power Spectral Density as seen by this VTU with respect to its
|
|
received signal in 0.01dBm/Hz."
|
|
::= { accessSwitchVdslVtuoPhysEntry 3 }
|
|
|
|
accessSwitchVdslVtuoCurrRsErr OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reed-Solomon error counted by this VTU with respect to its
|
|
received signal."
|
|
::= { accessSwitchVdslVtuoPhysEntry 4 }
|
|
|
|
accessSwitchVdslVtuoCurrAtn OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Measured difference in the total power transmitted by
|
|
the peer VTU and the total power received by this VTU."
|
|
::= { accessSwitchVdslVtuoPhysEntry 5 }
|
|
|
|
accessSwitchVdslVtuoCurrOutputPwr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Measured total output power in 0.01dBm transmitted by this VTU."
|
|
::= { accessSwitchVdslVtuoPhysEntry 6 }
|
|
|
|
accessSwitchVdslVtuoCurrRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Actual transmission rate in bits-per-second on this line."
|
|
::= { accessSwitchVdslVtuoPhysEntry 7 }
|
|
|
|
accessSwitchVdslVtuoCurrAttainableRate OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the maximum mandatoryly attainable data rate in bits-per-second
|
|
by the VTU. This value will be equal or greater than
|
|
the mandatory line rate."
|
|
::= { accessSwitchVdslVtuoPhysEntry 8 }
|
|
|
|
accessSwitchVdslVtuoCurrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates mandatory state of the VTU-O line. This is a
|
|
bit-map of possible conditions. The various bit
|
|
positions are:
|
|
|
|
0 noDefect There no defects on the line
|
|
|
|
1 lossOfFraming VTU-O failure due to not
|
|
receiving valid frame.
|
|
|
|
2 lossOfSignal VTU-O failure due to not
|
|
receiving signal.
|
|
|
|
3 lossOfPower VTU-O failure due to loss of
|
|
power.
|
|
Note: the Agent may still
|
|
function.
|
|
|
|
4 lossOfSignalQuality Loss of Signal Quality is
|
|
declared when the Noise Margin
|
|
falls below the Minimum Noise
|
|
Margin, or the bit-error-rate
|
|
exceeds 10^-7.
|
|
|
|
5 lossOfLink VTU-O failure due to inability
|
|
to link with VTU-R.
|
|
|
|
6 dataInitFailure VTU-O failure during
|
|
initialization due to bit
|
|
errors corrupting startup
|
|
exchange data.
|
|
|
|
7 configInitFailure VTU-O failure during
|
|
initialization due to peer
|
|
VTU not able to support
|
|
requested configuration
|
|
|
|
8 protocolInitFailure VTU-O failure during
|
|
initialization due to
|
|
incompatible protocol used by
|
|
the peer VTU.
|
|
|
|
9 noPeerVtuPresent VTU-O failure during
|
|
initialization due to no
|
|
activation sequence detected
|
|
from peer VTU.
|
|
|
|
This is intended to supplement ifOperStatus."
|
|
::= { accessSwitchVdslVtuoPhysEntry 9 }
|
|
|
|
|
|
-- accessSwitch VDSL VTU-R Physical Table
|
|
|
|
accessSwitchVdslVturPhysTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslVturPhysEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides one row for each VTU-R.
|
|
Each row contains the physical layer parameters for that VTU-R."
|
|
::= { accessSwitchVdslLineMibObjects 3 }
|
|
|
|
accessSwitchVdslVturPhysEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslVturPhysEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the accessSwitchVdslVturPhysTable."
|
|
INDEX { ifIndex }
|
|
::= { accessSwitchVdslVturPhysTable 1 }
|
|
|
|
AccessSwitchVdslVturPhysEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslVturCurrSnrMgn INTEGER,
|
|
accessSwitchVdslVturCurrMse INTEGER,
|
|
accessSwitchVdslVturCurrPsd INTEGER,
|
|
accessSwitchVdslVturCurrRsErr Counter,
|
|
accessSwitchVdslVturCurrAtn Gauge,
|
|
accessSwitchVdslVturCurrOutputPwr INTEGER,
|
|
accessSwitchVdslVturCurrRate INTEGER,
|
|
accessSwitchVdslVturCurrAttainableRate Gauge,
|
|
accessSwitchVdslVturCurrStatus INTEGER
|
|
}
|
|
|
|
accessSwitchVdslVturCurrSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Noise Margin as seen by this VTU with respect to its
|
|
received signal in 0.01dB."
|
|
::= { accessSwitchVdslVturPhysEntry 1 }
|
|
|
|
accessSwitchVdslVturCurrMse OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minimum Square Error as seen by this VTU with respect to its
|
|
received signal in 0.01dB."
|
|
::= { accessSwitchVdslVturPhysEntry 2 }
|
|
|
|
accessSwitchVdslVturCurrPsd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Power Spectral Density as seen by this VTU with respect to its
|
|
received signal in 0.01dBm/Hz."
|
|
::= { accessSwitchVdslVturPhysEntry 3 }
|
|
|
|
accessSwitchVdslVturCurrRsErr OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reed-Solomon error counted by this VTU with respect to its
|
|
received signal."
|
|
::= { accessSwitchVdslVturPhysEntry 4 }
|
|
|
|
accessSwitchVdslVturCurrAtn OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Measured difference in the total power transmitted by
|
|
the peer VTU and the total power received by this VTU."
|
|
::= { accessSwitchVdslVturPhysEntry 5 }
|
|
|
|
accessSwitchVdslVturCurrOutputPwr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Measured total output power in 0.01dBm transmitted by this VTU."
|
|
::= { accessSwitchVdslVturPhysEntry 6 }
|
|
|
|
accessSwitchVdslVturCurrRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Actual transmission rate in bits-per-second on this line."
|
|
::= { accessSwitchVdslVturPhysEntry 7 }
|
|
|
|
accessSwitchVdslVturCurrAttainableRate OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the maximum mandatoryly attainable data rate in bits-per-second
|
|
by the VTU. This value will be equal or greater than
|
|
the mandatory line rate."
|
|
::= { accessSwitchVdslVturPhysEntry 8 }
|
|
|
|
accessSwitchVdslVturCurrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates mandatory state of the VTU-R line. This is a
|
|
bit-map of possible conditions. The various bit
|
|
positions are:
|
|
|
|
0 noDefect There no defects on the line
|
|
|
|
1 lossOfFraming VTU-R failure due to not
|
|
receiving valid frame.
|
|
|
|
2 lossOfSignal VTU-R failure due to not
|
|
receiving signal.
|
|
|
|
3 lossOfPower VTU-R failure due to loss of
|
|
power.
|
|
Note: the Agent may still
|
|
function.
|
|
|
|
4 lossOfSignalQuality Loss of Signal Quality is
|
|
declared when the Noise Margin
|
|
falls below the Minimum Noise
|
|
Margin, or the bit-error-rate
|
|
exceeds 10^-7.
|
|
|
|
This is intended to supplement ifOperStatus."
|
|
::= { accessSwitchVdslVturPhysEntry 9 }
|
|
|
|
|
|
-- accessSwitch VDSL VTU-O Inventory Table
|
|
|
|
accessSwitchVdslVtuoInventoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslVtuoInventoryEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides one row for each VTU-O.
|
|
Each row contains the inventory parameters for that VTU-O."
|
|
::= { accessSwitchVdslLineMibObjects 4 }
|
|
|
|
accessSwitchVdslVtuoInventoryEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslVtuoInventoryEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the accessSwitchVdslVtuoInventoryTable."
|
|
INDEX { ifIndex }
|
|
::= { accessSwitchVdslVtuoInventoryTable 1 }
|
|
|
|
AccessSwitchVdslVtuoInventoryEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslVtuoInvSerialNumber DisplayString,
|
|
accessSwitchVdslVtuoInvVendorID DisplayString,
|
|
accessSwitchVdslVtuoInvVersionNumber DisplayString
|
|
}
|
|
|
|
-- These items should describe the lowest level identifiable
|
|
-- component, be it a stand-alone modem, a card in a rack,
|
|
-- a child-board, etc.
|
|
--
|
|
accessSwitchVdslVtuoInvSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The vendor specific string that identifies the
|
|
vendor equipment."
|
|
::= { accessSwitchVdslVtuoInventoryEntry 1 }
|
|
|
|
accessSwitchVdslVtuoInvVendorID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The vendor ID code is a copy of the binary
|
|
vendor identification field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
::= { accessSwitchVdslVtuoInventoryEntry 2 }
|
|
|
|
accessSwitchVdslVtuoInvVersionNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The vendor specific version number sent by this VTU
|
|
as part of the initialization messages. It is a copy
|
|
of the binary version number field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
::= { accessSwitchVdslVtuoInventoryEntry 3 }
|
|
|
|
|
|
-- accessSwitch VDSL VTU-R Inventory Table
|
|
|
|
accessSwitchVdslVturInventoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslVturInventoryEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides one row for each VTU-R.
|
|
Each row contains the inventory parameters for that VTU-R."
|
|
::= { accessSwitchVdslLineMibObjects 5 }
|
|
|
|
accessSwitchVdslVturInventoryEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslVturInventoryEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the accessSwitchVdslVturInventoryTable."
|
|
INDEX { ifIndex }
|
|
::= { accessSwitchVdslVturInventoryTable 1 }
|
|
|
|
AccessSwitchVdslVturInventoryEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslVturInvSerialNumber DisplayString,
|
|
accessSwitchVdslVturInvVendorID DisplayString,
|
|
accessSwitchVdslVturInvVersionNumber DisplayString
|
|
}
|
|
|
|
-- These items should describe the lowest level identifiable
|
|
-- component, be it a stand-alone modem, a card in a rack,
|
|
-- a child-board, etc.
|
|
--
|
|
accessSwitchVdslVturInvSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The vendor specific string that identifies the
|
|
vendor equipment."
|
|
::= { accessSwitchVdslVturInventoryEntry 1 }
|
|
|
|
accessSwitchVdslVturInvVendorID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The vendor ID code is a copy of the binary
|
|
vendor identification field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
::= { accessSwitchVdslVturInventoryEntry 2 }
|
|
|
|
accessSwitchVdslVturInvVersionNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The vendor specific version number sent by this VTU
|
|
as part of the initialization messages. It is a copy
|
|
of the binary version number field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
::= { accessSwitchVdslVturInventoryEntry 3 }
|
|
|
|
|
|
-- accessSwitch VDSL VTU-O Performance Data Table
|
|
|
|
accessSwitchVdslVtuoPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslVtuoPerfDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides one row for each VTU-O."
|
|
::= { accessSwitchVdslLineMibObjects 6 }
|
|
|
|
accessSwitchVdslVtuoPerfDataEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslVtuoPerfDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in accessSwitchVdslVtuoPerfDataTable."
|
|
INDEX { ifIndex }
|
|
::= { accessSwitchVdslVtuoPerfDataTable 1 }
|
|
|
|
AccessSwitchVdslVtuoPerfDataEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslVtuoPerfLofs Counter,
|
|
accessSwitchVdslVtuoPerfLoss Counter,
|
|
accessSwitchVdslVtuoPerfLols Counter,
|
|
accessSwitchVdslVtuoPerfLprs Counter,
|
|
accessSwitchVdslVtuoPerfESs Counter,
|
|
accessSwitchVdslVtuoPerfInits Counter,
|
|
accessSwitchVdslVtuoPerfValidIntervals INTEGER,
|
|
accessSwitchVdslVtuoPerfInvalidIntervals INTEGER,
|
|
accessSwitchVdslVtuoPerfCurr15MinTimeElapsed Gauge,
|
|
accessSwitchVdslVtuoPerfCurr15MinLofs Counter,
|
|
accessSwitchVdslVtuoPerfCurr15MinLoss Counter,
|
|
accessSwitchVdslVtuoPerfCurr15MinLols Counter,
|
|
accessSwitchVdslVtuoPerfCurr15MinLprs Counter,
|
|
accessSwitchVdslVtuoPerfCurr15MinESs Counter,
|
|
accessSwitchVdslVtuoPerfCurr15MinInits Counter,
|
|
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed Gauge,
|
|
accessSwitchVdslVtuoPerfCurr1DayLofs Counter,
|
|
accessSwitchVdslVtuoPerfCurr1DayLoss Counter,
|
|
accessSwitchVdslVtuoPerfCurr1DayLols Counter,
|
|
accessSwitchVdslVtuoPerfCurr1DayLprs Counter,
|
|
accessSwitchVdslVtuoPerfCurr1DayESs Counter,
|
|
accessSwitchVdslVtuoPerfCurr1DayInits Counter,
|
|
accessSwitchVdslVtuoPerfPrev1DayMoniSecs INTEGER,
|
|
accessSwitchVdslVtuoPerfPrev1DayLofs Counter,
|
|
accessSwitchVdslVtuoPerfPrev1DayLoss Counter,
|
|
accessSwitchVdslVtuoPerfPrev1DayLols Counter,
|
|
accessSwitchVdslVtuoPerfPrev1DayLprs Counter,
|
|
accessSwitchVdslVtuoPerfPrev1DayESs Counter,
|
|
accessSwitchVdslVtuoPerfPrev1DayInits Counter
|
|
}
|
|
|
|
-- Event Counters
|
|
--
|
|
-- Also see accessSwitchVdslVtuoIntervalTable for 15 minute interval
|
|
-- elapsed counters.
|
|
--
|
|
accessSwitchVdslVtuoPerfLofs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Framing failures since
|
|
agent reset."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 1 }
|
|
|
|
accessSwitchVdslVtuoPerfLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Signal failures since
|
|
agent reset."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 2 }
|
|
|
|
accessSwitchVdslVtuoPerfLols OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Link failures since
|
|
agent reset."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 3 }
|
|
|
|
accessSwitchVdslVtuoPerfLprs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Power failures since
|
|
agent reset."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 4 }
|
|
|
|
accessSwitchVdslVtuoPerfESs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of Errored Seconds since agent
|
|
reset. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 5 }
|
|
|
|
accessSwitchVdslVtuoPerfInits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts since
|
|
agent reset. Includes both successful and failed
|
|
attempts."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 6 }
|
|
|
|
-- general 15 min interval information
|
|
--
|
|
accessSwitchVdslVtuoPerfValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals in the
|
|
interval table for which data was collected. Given
|
|
that <n> is the maximum # of intervals supported.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 7 }
|
|
|
|
accessSwitchVdslVtuoPerfInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to the value of accessSwitchVdslVtuoPerfValidIntervals
|
|
for which no data is available. This object
|
|
will typically be zero except in cases where
|
|
the data for some intervals are not available
|
|
(e.g., in proxy situations)."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 8 }
|
|
|
|
-- 15 min mandatory performance group
|
|
--
|
|
accessSwitchVdslVtuoPerfCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge(0..899)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 9 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr15MinLofs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Framing."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 10 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr15MinLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Signal."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 11 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr15MinLols OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Link."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 12 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr15MinLprs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Power."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 13 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr15MinESs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of Errored Seconds in the mandatory 15 minute
|
|
interval. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 14 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr15MinInits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts in the
|
|
mandatory 15 minute interval. Includes both successful
|
|
and failed attempts."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 15 }
|
|
|
|
-- 1-day mandatory and previous performance group
|
|
--
|
|
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge(0..86399)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the
|
|
beginning of the mandatory 1-day interval."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 16 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr1DayLofs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss of
|
|
Framing during the mandatory day as measured by
|
|
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 17 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr1DayLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss of
|
|
Signal during the mandatory day as measured by
|
|
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 18 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr1DayLols OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss of
|
|
Link during the mandatory day as measured by
|
|
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 19 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr1DayLprs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss of
|
|
Power during the mandatory day as measured by
|
|
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 20 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr1DayESs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of Errored Seconds during the mandatory day as
|
|
measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.
|
|
The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 21 }
|
|
|
|
accessSwitchVdslVtuoPerfCurr1DayInits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts in the
|
|
day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.
|
|
Includes both successful and failed attempts."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 22 }
|
|
|
|
accessSwitchVdslVtuoPerfPrev1DayMoniSecs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..86400)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of time in the previous 1-day interval
|
|
over which the performance monitoring information
|
|
is actually counted. This value will be the same as
|
|
the interval duration except in a situation where
|
|
performance monitoring data could not be collected
|
|
for any reason."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 23 }
|
|
|
|
accessSwitchVdslVtuoPerfPrev1DayLofs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Framing within the most recent previous
|
|
1-day period."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 24 }
|
|
|
|
accessSwitchVdslVtuoPerfPrev1DayLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Signal within the most recent previous
|
|
1-day period."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 25 }
|
|
|
|
accessSwitchVdslVtuoPerfPrev1DayLols OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Link within the most recent previous
|
|
1-day period."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 26 }
|
|
|
|
accessSwitchVdslVtuoPerfPrev1DayLprs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Power within the most recent previous
|
|
1-day period."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 27 }
|
|
|
|
accessSwitchVdslVtuoPerfPrev1DayESs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of Errored Seconds within the most recent
|
|
previous 1-day period. The errored second parameter is
|
|
a count of one-second intervals containing one or more
|
|
crc anomalies, or one or more los or sef defects."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 28 }
|
|
|
|
accessSwitchVdslVtuoPerfPrev1DayInits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts in the most
|
|
recent previous 1-day period. Includes both successful
|
|
and failed attempts."
|
|
::= { accessSwitchVdslVtuoPerfDataEntry 29 }
|
|
|
|
|
|
-- accessSwitch VDSL VTU-R Performance Data Table
|
|
|
|
accessSwitchVdslVturPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslVturPerfDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides one row for each VTU-R."
|
|
::= { accessSwitchVdslLineMibObjects 7 }
|
|
|
|
accessSwitchVdslVturPerfDataEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslVturPerfDataEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in accessSwitchVdslVturPerfDataTable."
|
|
INDEX { ifIndex }
|
|
::= { accessSwitchVdslVturPerfDataTable 1 }
|
|
|
|
AccessSwitchVdslVturPerfDataEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslVturPerfLofs Counter,
|
|
accessSwitchVdslVturPerfLoss Counter,
|
|
accessSwitchVdslVturPerfLprs Counter,
|
|
accessSwitchVdslVturPerfESs Counter,
|
|
accessSwitchVdslVturPerfValidIntervals INTEGER,
|
|
accessSwitchVdslVturPerfInvalidIntervals INTEGER,
|
|
accessSwitchVdslVturPerfCurr15MinTimeElapsed Gauge,
|
|
accessSwitchVdslVturPerfCurr15MinLofs Counter,
|
|
accessSwitchVdslVturPerfCurr15MinLoss Counter,
|
|
accessSwitchVdslVturPerfCurr15MinLprs Counter,
|
|
accessSwitchVdslVturPerfCurr15MinESs Counter,
|
|
accessSwitchVdslVturPerfCurr1DayTimeElapsed Gauge,
|
|
accessSwitchVdslVturPerfCurr1DayLofs Counter,
|
|
accessSwitchVdslVturPerfCurr1DayLoss Counter,
|
|
accessSwitchVdslVturPerfCurr1DayLprs Counter,
|
|
accessSwitchVdslVturPerfCurr1DayESs Counter,
|
|
accessSwitchVdslVturPerfPrev1DayMoniSecs INTEGER,
|
|
accessSwitchVdslVturPerfPrev1DayLofs Counter,
|
|
accessSwitchVdslVturPerfPrev1DayLoss Counter,
|
|
accessSwitchVdslVturPerfPrev1DayLprs Counter,
|
|
accessSwitchVdslVturPerfPrev1DayESs Counter
|
|
}
|
|
|
|
-- Event Counters
|
|
--
|
|
-- Also see accessSwitchVdslVturIntervalTable for 15 minute interval
|
|
-- elapsed counters.
|
|
--
|
|
accessSwitchVdslVturPerfLofs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Framing failures since
|
|
agent reset."
|
|
::= { accessSwitchVdslVturPerfDataEntry 1 }
|
|
|
|
accessSwitchVdslVturPerfLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Signal failures since
|
|
agent reset."
|
|
::= { accessSwitchVdslVturPerfDataEntry 2 }
|
|
|
|
accessSwitchVdslVturPerfLprs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Power failures since
|
|
agent reset."
|
|
::= { accessSwitchVdslVturPerfDataEntry 3 }
|
|
|
|
accessSwitchVdslVturPerfESs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of Errored Seconds since agent
|
|
reset. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { accessSwitchVdslVturPerfDataEntry 4 }
|
|
|
|
-- general 15 min interval information
|
|
--
|
|
accessSwitchVdslVturPerfValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals in the
|
|
interval table for which data was collected. Given
|
|
that <n> is the maximum # of intervals supported.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available."
|
|
::= { accessSwitchVdslVturPerfDataEntry 5 }
|
|
|
|
accessSwitchVdslVturPerfInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER(0..96)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to the value of accessSwitchVdslVturPerfValidIntervals
|
|
for which no data is available. This object
|
|
will typically be zero except in cases where
|
|
the data for some intervals are not available
|
|
(e.g., in proxy situations)."
|
|
::= { accessSwitchVdslVturPerfDataEntry 6 }
|
|
|
|
-- 15 min mandatory performance group
|
|
--
|
|
accessSwitchVdslVturPerfCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge(0..899)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval."
|
|
::= { accessSwitchVdslVturPerfDataEntry 7 }
|
|
|
|
accessSwitchVdslVturPerfCurr15MinLofs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Framing."
|
|
::= { accessSwitchVdslVturPerfDataEntry 8 }
|
|
|
|
accessSwitchVdslVturPerfCurr15MinLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Signal."
|
|
::= { accessSwitchVdslVturPerfDataEntry 9 }
|
|
|
|
accessSwitchVdslVturPerfCurr15MinLprs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Power."
|
|
::= { accessSwitchVdslVturPerfDataEntry 10 }
|
|
|
|
accessSwitchVdslVturPerfCurr15MinESs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of Errored Seconds in the mandatory 15 minute
|
|
interval. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { accessSwitchVdslVturPerfDataEntry 11 }
|
|
|
|
-- 1-day mandatory and previous performance group
|
|
--
|
|
accessSwitchVdslVturPerfCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge(0..86399)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the
|
|
beginning of the mandatory 1-day interval."
|
|
::= { accessSwitchVdslVturPerfDataEntry 12 }
|
|
|
|
accessSwitchVdslVturPerfCurr1DayLofs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss of
|
|
Framing during the mandatory day as measured by
|
|
accessSwitchVdslVturPerfCurr1DayTimeElapsed."
|
|
::= { accessSwitchVdslVturPerfDataEntry 13 }
|
|
|
|
accessSwitchVdslVturPerfCurr1DayLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss of
|
|
Signal during the mandatory day as measured by
|
|
accessSwitchVdslVturPerfCurr1DayTimeElapsed."
|
|
::= { accessSwitchVdslVturPerfDataEntry 14 }
|
|
|
|
accessSwitchVdslVturPerfCurr1DayLprs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss of
|
|
Power during the mandatory day as measured by
|
|
accessSwitchVdslVturPerfCurr1DayTimeElapsed."
|
|
::= { accessSwitchVdslVturPerfDataEntry 15 }
|
|
|
|
accessSwitchVdslVturPerfCurr1DayESs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of Errored Seconds during the mandatory day as
|
|
measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.
|
|
The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { accessSwitchVdslVturPerfDataEntry 16 }
|
|
|
|
accessSwitchVdslVturPerfPrev1DayMoniSecs OBJECT-TYPE
|
|
SYNTAX INTEGER(0..86400)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of time in the previous 1-day interval
|
|
over which the performance monitoring information
|
|
is actually counted. This value will be the same as
|
|
the interval duration except in a situation where
|
|
performance monitoring data could not be collected
|
|
for any reason."
|
|
::= { accessSwitchVdslVturPerfDataEntry 17 }
|
|
|
|
accessSwitchVdslVturPerfPrev1DayLofs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Framing within the most recent previous
|
|
1-day period."
|
|
::= { accessSwitchVdslVturPerfDataEntry 18 }
|
|
|
|
accessSwitchVdslVturPerfPrev1DayLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Signal within the most recent previous
|
|
1-day period."
|
|
::= { accessSwitchVdslVturPerfDataEntry 19 }
|
|
|
|
accessSwitchVdslVturPerfPrev1DayLprs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Power within the most recent previous
|
|
1-day period."
|
|
::= { accessSwitchVdslVturPerfDataEntry 20 }
|
|
|
|
accessSwitchVdslVturPerfPrev1DayESs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of Errored Seconds within the most recent
|
|
previous 1-day period. The errored second parameter is
|
|
a count of one-second intervals containing one or more
|
|
crc anomalies, or one or more los or sef defects."
|
|
::= { accessSwitchVdslVturPerfDataEntry 21 }
|
|
|
|
|
|
-- accessSwitch VDSL VTU-O Interval Table
|
|
|
|
accessSwitchVdslVtuoIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslVtuoIntervalEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides one row for each VTU-O
|
|
performance data collection interval."
|
|
::= { accessSwitchVdslLineMibObjects 8 }
|
|
|
|
accessSwitchVdslVtuoIntervalEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslVtuoIntervalEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the accessSwitchVdslVtuoIntervalTable."
|
|
INDEX { ifIndex, accessSwitchVdslVtuoIntervalNumber }
|
|
::= { accessSwitchVdslVtuoIntervalTable 1 }
|
|
|
|
AccessSwitchVdslVtuoIntervalEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslVtuoIntervalNumber INTEGER,
|
|
accessSwitchVdslVtuoIntervalLofs Counter,
|
|
accessSwitchVdslVtuoIntervalLoss Counter,
|
|
accessSwitchVdslVtuoIntervalLols Counter,
|
|
accessSwitchVdslVtuoIntervalLprs Counter,
|
|
accessSwitchVdslVtuoIntervalESs Counter,
|
|
accessSwitchVdslVtuoIntervalInits Counter,
|
|
accessSwitchVdslVtuoIntervalValidData INTEGER
|
|
}
|
|
|
|
accessSwitchVdslVtuoIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(1..96)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Performance Data Interval number 1 is the
|
|
the most recent previous interval; interval
|
|
96 is 24 hours ago. Intervals 2..96 are
|
|
optional."
|
|
::= { accessSwitchVdslVtuoIntervalEntry 1 }
|
|
|
|
accessSwitchVdslVtuoIntervalLofs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Framing."
|
|
::= { accessSwitchVdslVtuoIntervalEntry 2 }
|
|
|
|
accessSwitchVdslVtuoIntervalLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Signal."
|
|
::= { accessSwitchVdslVtuoIntervalEntry 3 }
|
|
|
|
accessSwitchVdslVtuoIntervalLols OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Link."
|
|
::= { accessSwitchVdslVtuoIntervalEntry 4 }
|
|
|
|
accessSwitchVdslVtuoIntervalLprs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Power."
|
|
::= { accessSwitchVdslVtuoIntervalEntry 5 }
|
|
|
|
accessSwitchVdslVtuoIntervalESs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of Errored Seconds in the interval.
|
|
The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { accessSwitchVdslVtuoIntervalEntry 6 }
|
|
|
|
accessSwitchVdslVtuoIntervalInits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts
|
|
during the interval. Includes both successful
|
|
and failed attempts."
|
|
::= { accessSwitchVdslVtuoIntervalEntry 7 }
|
|
|
|
accessSwitchVdslVtuoIntervalValidData OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { accessSwitchVdslVtuoIntervalEntry 8 }
|
|
|
|
|
|
-- accessSwitch VDSL VTU-R Interval Table
|
|
|
|
accessSwitchVdslVturIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslVturIntervalEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides one row for each VTU-R
|
|
performance data collection interval."
|
|
::= { accessSwitchVdslLineMibObjects 9 }
|
|
|
|
accessSwitchVdslVturIntervalEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslVturIntervalEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the accessSwitchVdslVturIntervalTable."
|
|
INDEX { ifIndex, accessSwitchVdslVturIntervalNumber }
|
|
::= { accessSwitchVdslVturIntervalTable 1 }
|
|
|
|
AccessSwitchVdslVturIntervalEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslVturIntervalNumber INTEGER,
|
|
accessSwitchVdslVturIntervalLofs Counter,
|
|
accessSwitchVdslVturIntervalLoss Counter,
|
|
accessSwitchVdslVturIntervalLprs Counter,
|
|
accessSwitchVdslVturIntervalESs Counter,
|
|
accessSwitchVdslVturIntervalValidData INTEGER
|
|
}
|
|
|
|
accessSwitchVdslVturIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(1..96)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Performance Data Interval number 1 is the
|
|
the most recent previous interval; interval
|
|
96 is 24 hours ago. Intervals 2..96 are
|
|
optional."
|
|
::= { accessSwitchVdslVturIntervalEntry 1 }
|
|
|
|
accessSwitchVdslVturIntervalLofs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Framing."
|
|
::= { accessSwitchVdslVturIntervalEntry 2 }
|
|
|
|
accessSwitchVdslVturIntervalLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Signal."
|
|
::= { accessSwitchVdslVturIntervalEntry 3 }
|
|
|
|
accessSwitchVdslVturIntervalLprs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Power."
|
|
::= { accessSwitchVdslVturIntervalEntry 4 }
|
|
|
|
accessSwitchVdslVturIntervalESs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of Errored Seconds in the interval.
|
|
The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { accessSwitchVdslVturIntervalEntry 5 }
|
|
|
|
accessSwitchVdslVturIntervalValidData OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { accessSwitchVdslVturIntervalEntry 6 }
|
|
|
|
|
|
|
|
-- Profile Group
|
|
--
|
|
|
|
-- accessSwitch VDSL Configuration Profile Table
|
|
|
|
accessSwitchVdslLineConfProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslLineConfProfileEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains information on the VDSL line
|
|
configuration. One entry in this table reflects a
|
|
profile which can be used to configure the VDSL line."
|
|
::= { accessSwitchVdslLineMibObjects 10 }
|
|
|
|
accessSwitchVdslLineConfProfileEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslLineConfProfileEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry consists of a list of parameters that
|
|
represents the configuration of an VDSL modem.
|
|
|
|
When `dynamic' profiles are implemented, a default
|
|
profile will always exist. This profile's name will
|
|
be set to `DEFVAL' and its parameters will be set
|
|
to vendor specific values, unless otherwise specified
|
|
in this document.
|
|
|
|
When `static' profiles are implemented, profiles
|
|
are automaticly created or destroyed as VDSL
|
|
physical lines are discovered and removed by
|
|
the system. The name of the profile will be
|
|
equivalent to the decimal value of the line's
|
|
interface index."
|
|
INDEX { IMPLIED accessSwitchVdslLineConfProfileName}
|
|
::= { accessSwitchVdslLineConfProfileTable 1 }
|
|
|
|
AccessSwitchVdslLineConfProfileEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslLineConfProfileName DisplayString,
|
|
accessSwitchVdslLineConfMode INTEGER,
|
|
accessSwitchVdslVtuoConfRate INTEGER,
|
|
accessSwitchVdslVtuoConfTargetSnrMgn INTEGER,
|
|
accessSwitchVdslVtuoConfMaxSnrMgn INTEGER,
|
|
accessSwitchVdslVtuoConfMinSnrMgn INTEGER,
|
|
accessSwitchVdslVturConfRate INTEGER,
|
|
accessSwitchVdslVturConfTargetSnrMgn INTEGER,
|
|
accessSwitchVdslVturConfMaxSnrMgn INTEGER,
|
|
accessSwitchVdslVturConfMinSnrMgn INTEGER,
|
|
accessSwitchVdslLineConfProfileRowStatus RowStatus
|
|
}
|
|
|
|
accessSwitchVdslLineConfProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used by the line configuration table
|
|
in order to identify a row of this table.
|
|
|
|
When `dynamic' profiles are implemented, the profile
|
|
name is user specified. Also, the system will always
|
|
provide a default profile whose name is `DEFVAL'.
|
|
|
|
When `static' profiles are implemented, there is an
|
|
one-to-one relationship between each line and its
|
|
profile. In which case, the profile name will
|
|
need to algorithmicly represent the Line's ifIndex.
|
|
Therefore, the profile's name is a decimalized string
|
|
of the ifIndex that is fixed-length (i.e., 10) with
|
|
leading zero(s). For example, the profile name for
|
|
ifIndex which equals '15' will be '0000000015'."
|
|
::= { accessSwitchVdslLineConfProfileEntry 1 }
|
|
|
|
accessSwitchVdslLineConfMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenBase-S(0), -- 10Base S mode
|
|
ansi(1), -- ANSI/ETSI Band Plan 997
|
|
etsi(2) -- ETSI Band Plan 998
|
|
}
|
|
ACCESS read-create
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the VDSL mode type used on this line."
|
|
::= { accessSwitchVdslLineConfProfileEntry 2 }
|
|
|
|
accessSwitchVdslVtuoConfRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-create
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Transmission rate in bits-per-second specified by this VTU."
|
|
::= { accessSwitchVdslLineConfProfileEntry 3 }
|
|
|
|
accessSwitchVdslVtuoConfTargetSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-create
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configured Target Signal/Noise Margin in 0.01dB.
|
|
This is the Noise Margin the modem must achieve
|
|
with a BER of 10-7 or better to successfully complete
|
|
initialization."
|
|
::= { accessSwitchVdslLineConfProfileEntry 4 }
|
|
|
|
accessSwitchVdslVtuoConfMaxSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-create
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configured Maximum acceptable Signal/Noise Margin in 0.01dB.
|
|
If the Noise Margin is above this the modem should
|
|
attempt to reduce its power output to optimize its
|
|
operation."
|
|
::= { accessSwitchVdslLineConfProfileEntry 5 }
|
|
|
|
accessSwitchVdslVtuoConfMinSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-create
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configured Minimum acceptable Signal/Noise Margin in 0.01dB.
|
|
If the noise margin falls below this level, the modem
|
|
should attempt to increase its power output. If that
|
|
is not possible the modem will attempt to
|
|
re-initialize or shut down."
|
|
::= { accessSwitchVdslLineConfProfileEntry 6 }
|
|
|
|
accessSwitchVdslVturConfRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-create
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Transmission rate in bits-per-second specified by this VTU."
|
|
::= { accessSwitchVdslLineConfProfileEntry 7 }
|
|
|
|
accessSwitchVdslVturConfTargetSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-create
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configured Target Signal/Noise Margin in 0.01dB.
|
|
This is the Noise Margin the modem must achieve
|
|
with a BER of 10-7 or better to successfully complete
|
|
initialization."
|
|
::= { accessSwitchVdslLineConfProfileEntry 8 }
|
|
|
|
accessSwitchVdslVturConfMaxSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-create
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configured Maximum acceptable Signal/Noise Margin in 0.01dB.
|
|
If the Noise Margin is above this the modem should
|
|
attempt to reduce its power output to optimize its
|
|
operation."
|
|
::= { accessSwitchVdslLineConfProfileEntry 9 }
|
|
|
|
accessSwitchVdslVturConfMinSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-create
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configured Minimum acceptable Signal/Noise Margin in 0.01dB.
|
|
If the noise margin falls below this level, the modem
|
|
should attempt to increase its power output. If that
|
|
is not possible the modem will attempt to
|
|
re-initialize or shut down."
|
|
::= { accessSwitchVdslLineConfProfileEntry 10 }
|
|
|
|
accessSwitchVdslLineConfProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-create
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to create a new row or modify or
|
|
delete an existing row in this table.
|
|
A profile activated by setting this object to
|
|
`active'. When `active' is set, the system
|
|
will validate the profile.
|
|
|
|
Before a profile can be deleted or taken out of
|
|
service, (by setting this object to `destroy' or
|
|
`outOfService') it must be first unreferenced
|
|
from all associated lines.
|
|
|
|
If the implementator of this MIB has chosen not
|
|
to implement `dynamic assignment' of profiles, this
|
|
object's MIN-ACCESS is read-only and its value
|
|
is always to be `active'."
|
|
::= { accessSwitchVdslLineConfProfileEntry 11 }
|
|
|
|
vesMaxNumOfProfiles OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of VDSL profiles which the system supports."
|
|
::= { accessSwitchVdslLineMibObjects 11 }
|
|
|
|
-- accessSwitch VDSL VTU-O QAM Table
|
|
|
|
accessSwitchVdslVtuoQamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslVtuoQamEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides one row for each VTU-O if QAM is used.
|
|
Each row contains the modulation parameters for that VTU-O."
|
|
::= { accessSwitchVdslLCSQam 1 }
|
|
|
|
accessSwitchVdslVtuoQamEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslVtuoQamEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the accessSwitchVdslVtuoQamTable."
|
|
INDEX { ifIndex }
|
|
::= { accessSwitchVdslVtuoQamTable 1 }
|
|
|
|
AccessSwitchVdslVtuoQamEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslVtuoQamConstellation INTEGER,
|
|
accessSwitchVdslVtuoQamInterpolation INTEGER,
|
|
accessSwitchVdslVtuoQamFc INTEGER
|
|
}
|
|
|
|
accessSwitchVdslVtuoQamConstellation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Modulation method used by this VTU."
|
|
::= { accessSwitchVdslVtuoQamEntry 1 }
|
|
|
|
accessSwitchVdslVtuoQamInterpolation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Modulation speed used by this VTU."
|
|
::= { accessSwitchVdslVtuoQamEntry 2 }
|
|
|
|
accessSwitchVdslVtuoQamFc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Carrier frequency in Hz used by this ATU."
|
|
::= { accessSwitchVdslVtuoQamEntry 3 }
|
|
|
|
|
|
-- accessSwitch VDSL VTU-R QAM Table
|
|
|
|
accessSwitchVdslVturQamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessSwitchVdslVturQamEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides one row for each VTU-R if QAM is used.
|
|
Each row contains the modulation parameters for that VTU-R."
|
|
::= { accessSwitchVdslLCSQam 2 }
|
|
|
|
accessSwitchVdslVturQamEntry OBJECT-TYPE
|
|
SYNTAX AccessSwitchVdslVturQamEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An entry in the accessSwitchVdslVturQamTable."
|
|
INDEX { ifIndex }
|
|
::= { accessSwitchVdslVturQamTable 1 }
|
|
|
|
AccessSwitchVdslVturQamEntry ::=
|
|
SEQUENCE {
|
|
accessSwitchVdslVturQamConstellation INTEGER,
|
|
accessSwitchVdslVturQamInterpolation INTEGER,
|
|
accessSwitchVdslVturQamFc INTEGER
|
|
}
|
|
|
|
accessSwitchVdslVturQamConstellation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Modulation method used by this VTU."
|
|
::= { accessSwitchVdslVturQamEntry 1 }
|
|
|
|
accessSwitchVdslVturQamInterpolation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Modulation speed used by this VTU."
|
|
::= { accessSwitchVdslVturQamEntry 2 }
|
|
|
|
accessSwitchVdslVturQamFc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Carrier frequency in Hz used by this ATU."
|
|
::= { accessSwitchVdslVturQamEntry 3 }
|
|
|
|
|
|
END
|