WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zyxel/ZYXEL-PORT-MIB

344 lines
11 KiB
Plaintext
Raw Blame History

-- Zyxel Communications Corporation
-- Private Enterprise MIB definition
-- This file describes the Zyxel Communications Corporation Enterprise MIB.
-- It contains Zyxel products OIDs, and common managed objects.
-- $Log: ZYXEL-PORT-MIB.mib $
-- Revision 1.16 2016/09/09 06:33:27 Alan
-- replace "ZyXEL" by "Zyxel"
-- Revision 1.15 2015/04/09 02:08:49 Willson
-- For backward compatibility, GS2210 & GS3700 can set "auto"
-- Revision 1.14 2014/12/24 06:42:38 Bruno
-- auto port speed
-- Revision 1.13 2014/09/23 01:18:46 MandyLi
-- support auto port speed
-- Revision 1.12 2013/12/06 07:07:58 ccho
-- remove uncessary imports
-- Revision 1.11 2013/11/20 06:54:14 ccho
-- renaming identifier name for SMI.V2
-- Revision 1.10 2013/11/06 05:42:20 ccho
-- fix mib style
-- Revision 1.9 2013/08/01 06:53:40 Aga
-- bug fix: for clear silverCreek faild message
-- Revision 1.8 2013/06/26 07:14:11 Mandy
-- Support notified trap for error recovered
-- Revision 1.7 2013/06/26 07:00:22 Aga
-- merge
-- Revision 1.7 2013/03/22 10:01:47 Neng
-- Support 10GBase Media Type.
-- Revision 1.6 2012/12/25 07:19:22 Aga
-- Revision 1.5 2012/09/19 07:44:19 Kevin
-- if it's leaf node, revise the vender name from zyxel to zy
-- Revision 1.4 2012/08/22 09:47:40 Kevin
-- clean warning for SNMPc
-- Revision 1.3 2012/08/09 03:41:48 shobi
-- Support speed-duplex 40G
-- Revision 1.2 2012/07/05 06:24:18 Kevin
-- 1. upgrade from SNMP to SNMPv2
-- 2. clean warning
-- Revision 1.1 2012/05/30 07:50:25 Kevin
-- Initial revision
ZYXEL-PORT-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM SNMPv2-SMI -- RFC2578
MODULE-IDENTITY
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
EnabledStatus
FROM P-BRIDGE-MIB
dot1dBasePort
FROM BRIDGE-MIB
ifIndex
FROM IF-MIB -- RFC2863
NOTIFICATION-TYPE
FROM SNMPv2-SMI
esMgmt
FROM ZYXEL-ES-SMI;
zyxelPort MODULE-IDENTITY
LAST-UPDATED "201207010000Z"
ORGANIZATION "Enterprise Solution Zyxel"
CONTACT-INFO
""
DESCRIPTION
"The subtree for port"
::= { esMgmt 61 }
zyxelPortSetup OBJECT IDENTIFIER ::= { zyxelPort 1 }
zyxelPortStatus OBJECT IDENTIFIER ::= { zyxelPort 2 }
zyxelPortNotifications OBJECT IDENTIFIER ::= { zyxelPort 3 }
-- *******************************************************************
-- *
-- * zyxelPortSetup
-- *
-- *******************************************************************
-- zyxelPortTable
zyxelPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZyxelPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains port configuration. "
::= { zyxelPortSetup 1 }
zyxelPortEntry OBJECT-TYPE
SYNTAX ZyxelPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains port configuration. "
INDEX { dot1dBasePort }
::= { zyxelPortTable 1 }
ZyxelPortEntry ::=
SEQUENCE {
zyPortSpeedDuplex INTEGER,
zyPortFlowControlState INTEGER,
zyPortName DisplayString,
zyPortIntrusionLockState EnabledStatus,
zyPortCX4CableLength INTEGER,
zyPort10GMediaType INTEGER,
zyPortExtendRangeState EnabledStatus
}
zyPortSpeedDuplex OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
speed10Half(1),
speed10Full(2),
speed100Half(3),
speed100Full(4),
speed1000Full(5),
speed10GFull(6),
speed12GFull(7),
speed40GFull(8),
speedAuto1000(9),
speedAuto10G(10),
speed2500Full(11),
speed5GFull(12),
speed10an(13),
speed100an(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select The speed and the duplex mode of the Ethernet connection on this port. Selecting Auto
(auto-negotiation) allows one port to negotiate with a peer port automatically to obtain the
connection speed and duplex mode that both ends support. When auto-negotiation is turned on,
a port on the Switch negotiates with the peer automatically to determine the connection speed
and duplex mode. If the peer port does not support auto-negotiation or turns off this feature,
the Switch determines the connection speed by detecting the signal on the cable and using half
duplex mode. Thus requiring you to make sure that the settings of the peer port are the same in
order to connect."
::= { zyxelPortEntry 1 }
zyPortFlowControlState OBJECT-TYPE
SYNTAX INTEGER {
tx-rx(1),
disable(2),
tx(3),
rx(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the flow control on this port. A concentration of traffic on a port decreases port
bandwidth and overflows buffer memory causing packet discards and frame losses. Flow control is used
to regulate transmission of signals to match the bandwidth of the receiving port."
::= { zyxelPortEntry 2 }
zyPortName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enter a descriptive name that identifies this port."
::= { zyxelPortEntry 3 }
zyPortIntrusionLockState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable intrusion lock on the port(s) and the port cannot be connected again after you
disconnected the cable."
::= { zyxelPortEntry 4 }
zyPortCX4CableLength OBJECT-TYPE
SYNTAX INTEGER {
halfMeters(0),
oneMeters(1),
threeMeters(2),
fiveMeters(3),
tenMeters(4),
fifteenMeters(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the number of meters for the length of the 10GBASE-CX4 cable you use to connect between the swtich
and another switch for stacking."
::= { zyxelPortEntry 5}
zyPort10GMediaType OBJECT-TYPE
SYNTAX INTEGER {
sfpPlus(0),
dac10g(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the 10GBase media type."
::= { zyxelPortEntry 6}
zyPortExtendRangeState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the extend-range mode on this port."
::= { zyxelPortEntry 7 }
-- *******************************************************************
-- *
-- * zyxelPortStatus
-- *
-- *******************************************************************
-- zyxelPortInfoTable
zyxelPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZyxelPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains port information. "
::= { zyxelPortStatus 1 }
zyxelPortInfoEntry OBJECT-TYPE
SYNTAX ZyxelPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains port information. "
INDEX { dot1dBasePort }
::= { zyxelPortInfoTable 1 }
ZyxelPortInfoEntry ::=
SEQUENCE {
zyPortModuleType INTEGER,
zyPortLinkUpType INTEGER,
zyPortTestStatus INTEGER,
zyPortCounterReset INTEGER,
zyPortUtilizationRx INTEGER,
zyPortUtilizationTx INTEGER
}
zyPortModuleType OBJECT-TYPE
SYNTAX INTEGER {
fastEthernet(0),
gigabitEthernet(1),
xgEthernet10000(2),
x1Ethernet40000(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This entry displays the speed type of modular."
::= { zyxelPortInfoEntry 1 }
zyPortLinkUpType OBJECT-TYPE
SYNTAX INTEGER {
down(0),
copper(1),
fiber(2),
xfp(3),
cx4(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entry shows the linkUp cable type (copper, fiber, xfp or cx4) for the combo ports."
::= { zyxelPortInfoEntry 2 }
zyPortTestStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
underTesting(1),
success(2),
fail(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This entry displays latest loopback test status of port while performing loopback test."
::= { zyxelPortInfoEntry 3 }
zyPortCounterReset OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable this entry can reset port counter record."
::= { zyxelPortInfoEntry 4 }
zyPortUtilizationRx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This entry display the percentage of port utilization per second received on this port."
::= { zyxelPortInfoEntry 5 }
zyPortUtilizationTx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This entry display the percentage of port utilization per second transmitted on this port."
::= { zyxelPortInfoEntry 6 }
zyPortAutonegotiationFailed NOTIFICATION-TYPE
OBJECTS {
ifIndex
}
STATUS current
DESCRIPTION
"Link speed and duplex mode autonegotiation has failed."
::= { zyxelPortNotifications 1 }
zyPortIntrusionLock NOTIFICATION-TYPE
OBJECTS {
ifIndex
}
STATUS current
DESCRIPTION
"The cable is disconnected and the port cannot be connected again."
::= { zyxelPortNotifications 2 }
zyPortAutonegotiationFailedRecovered NOTIFICATION-TYPE
OBJECTS {
ifIndex
}
STATUS current
DESCRIPTION
"Link speed and duplex mode autonegotiation has recovered from failed."
::= { zyxelPortNotifications 3 }
END
View Git Blame Copy Permalink