245 lines
12 KiB
Plaintext
245 lines
12 KiB
Plaintext
-- ZyXEL Communications Corporation
|
|
-- Private Enterprise MIB definition
|
|
|
|
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
|
|
-- It contains ZyXEL products OIDs, and common managed objects.
|
|
|
|
-- $Log: ZYXEL-MULTICAST-MIB.mib $
|
|
-- Revision 1.4 2013/12/06 07:07:15 ccho
|
|
-- remove uncessary imports
|
|
-- Revision 1.3 2012/09/19 07:42:34 Kevin
|
|
-- if it's leaf node, revise the vender name from zyxel to zy
|
|
-- Revision 1.2 2012/07/05 06:23:47 Kevin
|
|
-- 1. upgrade from SNMP to SNMPv2
|
|
-- 2. clean warning
|
|
-- Revision 1.1 2012/05/30 07:50:20 Kevin
|
|
-- Initial revision
|
|
|
|
ZYXEL-MULTICAST-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM SNMPv2-SMI -- RFC2578
|
|
|
|
MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
|
|
esMgmt
|
|
FROM ZYXEL-ES-SMI;
|
|
|
|
zyxelMulticast MODULE-IDENTITY
|
|
LAST-UPDATED "201207010000Z"
|
|
ORGANIZATION "Enterprise Solution ZyXEL"
|
|
CONTACT-INFO
|
|
""
|
|
DESCRIPTION
|
|
"The subtree for multicast"
|
|
::= { esMgmt 54 }
|
|
|
|
zyxelMulticastSetup OBJECT IDENTIFIER ::= { zyxelMulticast 1 }
|
|
|
|
|
|
|
|
-- *******************************************************************
|
|
-- *
|
|
-- * zyxelMulticastSetup
|
|
-- *
|
|
-- *******************************************************************
|
|
|
|
-- zyxelMulticastUnknownMulticastFrameForwarding
|
|
zyMulticastUnknownMulticastFrameForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flooding(1),
|
|
drop(2),
|
|
drop-vlan(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the action to perform when the switch receives an unknown multicast frame. Unknown multicast
|
|
frames are addressed to multicast groups for which the Switch has not recorded any group members.
|
|
Select flooding(1) to send the frame(s) to all ports of the same domain.
|
|
Select drop(2) to discard the frame(s).
|
|
Select drop-vlan(3) to discard the frame(s) on the specific VLAN(s).
|
|
|
|
Note:
|
|
If the new action is NOT drop-vlan(3), the zyMulticastUnknownMulticastFrameDropVlan(1~4)k will be cleared.
|
|
If the zyMulticastUnknownMulticastFrameDropVlan(1~4)k are all Zero, the action 'drop-vlan(3)' cannot be selected.
|
|
Thus, to perform action drop-vlan(3) must setup zyMulticastUnknownMulticastFrameDropVlan(1~4)k first."
|
|
::= { zyxelMulticastSetup 1 }
|
|
|
|
-- zyxelMulticastReservedMulticastFrameForwarding
|
|
zyMulticastReservedMulticastFrameForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flooding(1),
|
|
drop(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address range of 224.0.0.0 to 224.0.0.255 are reserved for multicasting on the local
|
|
network only. For example, 224.0.0.1 is for all hosts on a local network segment and 224.0.0.9 is
|
|
used to send RIP routing information to all RIP v2 routers on the same network segment. A multicast
|
|
router will not forward a packet with the destination IP address within this range to other networks.
|
|
See the IANA web site for more information.
|
|
The layer-2 multicast MAC addresses are also included in this group.
|
|
Specify the action to perform when the Switch receives a frame with a reserved multicast address.
|
|
Select Drop to discard the frame(s). Select Flooding to send the frame(s) to all ports of the same domain. "
|
|
::= { zyxelMulticastSetup 2 }
|
|
|
|
-- zyMulticastUnknownMulticastFrameDropVlan1k
|
|
zyMulticastUnknownMulticastFrameDropVlan1k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8;
|
|
the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet.
|
|
Each bit can be set to 0 or 1:
|
|
Set to 0: Exclude this VLAN.
|
|
Set to 1: Include this VLAN.
|
|
Note:
|
|
Only take effect for zyMulticastUnknownMulticastFrameForwarding = drop-vlan(3),
|
|
and the total VLAN counts of zyMulticastUnknownMulticastFrameDropVlan(1~4)k should be in range 1 to 16."
|
|
::= { zyxelMulticastSetup 3 }
|
|
|
|
-- zyMulticastUnknownMulticastFrameDropVlan2k
|
|
zyMulticastUnknownMulticastFrameDropVlan2k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN for VLANs with VlanIndex values 1025 through 2048.
|
|
The first octet corresponds to VLANs with VlanIndex values 1025 through 1032; the second octet to VLANs 1033 through 1040 etc.
|
|
The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet.
|
|
Each bit can be set to 0 or 1:
|
|
Set to 0: Exclude this VLAN.
|
|
Set to 1: Include this VLAN.
|
|
Note:
|
|
Only take effect for zyMulticastUnknownMulticastFrameForwarding = drop-vlan(3),
|
|
and the total VLAN counts of zyMulticastUnknownMulticastFrameDropVlan(1~4)k should be in range 1 to 16."
|
|
::= { zyxelMulticastSetup 4 }
|
|
|
|
-- zyMulticastUnknownMulticastFrameDropVlan3k
|
|
zyMulticastUnknownMulticastFrameDropVlan3k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN for VLANs with VlanIndex values 2049 through 3072.
|
|
The first octet corresponds to VLANs with VlanIndex values of 2049 through 2056; the second octet to VLANs 2057 through 2064 etc.
|
|
The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet.
|
|
Each bit can be set to 0 or 1:
|
|
Set to 0: Exclude this VLAN.
|
|
Set to 1: Include this VLAN.
|
|
Note:
|
|
Only take effect for zyMulticastUnknownMulticastFrameForwarding = drop-vlan(3),
|
|
and the total VLAN counts of zyMulticastUnknownMulticastFrameDropVlan(1~4)k should be in range 1 to 16."
|
|
::= { zyxelMulticastSetup 5 }
|
|
|
|
-- zyMulticastUnknownMulticastFrameDropVlan4k
|
|
zyMulticastUnknownMulticastFrameDropVlan4k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN for VLANs with VlanIndex values 3073 through 4094.
|
|
The first octet corresponds to VLANs with VlanIndex values 3073 through 3080; the second octet to VLANs 3081 through 3088 etc.
|
|
The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet.
|
|
Each bit can be set to 0 or 1:
|
|
Set to 0: Exclude this VLAN.
|
|
Set to 1: Include this VLAN.
|
|
Note:
|
|
Only take effect for zyMulticastUnknownMulticastFrameForwarding = drop-vlan(3),
|
|
and the total VLAN counts of zyMulticastUnknownMulticastFrameDropVlan(1~4)k should be in range 1 to 16."
|
|
::= { zyxelMulticastSetup 6 }
|
|
|
|
-- zyxelMulticastUnknownMulticastFrameToQuerierPort
|
|
zyMulticastUnknownMulticastFrameToQuerierPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
drop(1),
|
|
forwarding(2),
|
|
forwarding-vlan(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When zyMulticastUnknownMulticastFrameForwarding is drop or drop-vlan and the switch receives an unknown multicast frame,
|
|
the action will work on the switch.
|
|
Unknown multicast frames are addressed to multicast groups for which the Switch has not recorded any group members.
|
|
Select drop(1) to not forward the frame(s).
|
|
Select forwarding(2) to forward the frame(s) to querier port(s) of the same domain.
|
|
Select forwarding-vlan(3) to forward the frame(s) to querier port(s) on the specific VLAN(s)."
|
|
|
|
::= { zyxelMulticastSetup 7 }
|
|
|
|
-- zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan1k
|
|
zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan1k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8;
|
|
the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet.
|
|
Each bit can be set to 0 or 1:
|
|
Set to 0: Exclude this VLAN.
|
|
Set to 1: Include this VLAN.
|
|
Note:
|
|
Only take effect for zyMulticastUnknownMulticastFrameToQuerierPort = forwarding-vlan(2),
|
|
and the total VLAN counts of zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan(1~4)k should be in range 1 to 16."
|
|
::= { zyxelMulticastSetup 8 }
|
|
|
|
-- zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan2k
|
|
zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan2k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN for VLANs with VlanIndex values 1025 through 2048.
|
|
The first octet corresponds to VLANs with VlanIndex values 1025 through 1032; the second octet to VLANs 1033 through 1040 etc.
|
|
The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet.
|
|
Each bit can be set to 0 or 1:
|
|
Set to 0: Exclude this VLAN.
|
|
Set to 1: Include this VLAN.
|
|
Note:
|
|
Only take effect for zyMulticastUnknownMulticastFrameToQuerierPort = forwarding-vlan(2),
|
|
and the total VLAN counts of zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan(1~4)k should be in range 1 to 16."
|
|
::= { zyxelMulticastSetup 9 }
|
|
|
|
-- zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan3k
|
|
zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan3k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN for VLANs with VlanIndex values 2049 through 3072.
|
|
The first octet corresponds to VLANs with VlanIndex values of 2049 through 2056; the second octet to VLANs 2057 through 2064 etc.
|
|
The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet.
|
|
Each bit can be set to 0 or 1:
|
|
Set to 0: Exclude this VLAN.
|
|
Set to 1: Include this VLAN.
|
|
Note:
|
|
Only take effect for zyMulticastUnknownMulticastFrameToQuerierPort = forwarding-vlan(2),
|
|
and the total VLAN counts of zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan(1~4)k should be in range 1 to 16."
|
|
::= { zyxelMulticastSetup 10 }
|
|
|
|
-- zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan4k
|
|
zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan4k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN for VLANs with VlanIndex values 3073 through 4094.
|
|
The first octet corresponds to VLANs with VlanIndex values 3073 through 3080; the second octet to VLANs 3081 through 3088 etc.
|
|
The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet.
|
|
Each bit can be set to 0 or 1:
|
|
Set to 0: Exclude this VLAN.
|
|
Set to 1: Include this VLAN.
|
|
Note:
|
|
Only take effect for zyMulticastUnknownMulticastFrameToQuerierPort = forwarding-vlan(2),
|
|
and the total VLAN counts of zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan(1~4)k should be in range 1 to 16."
|
|
::= { zyxelMulticastSetup 11 }
|
|
|
|
END
|
|
|