Observium_CE/mibs/zyxel/ZYXEL-MAC-AUTHENTICATION-MIB

236 lines
8.6 KiB
Plaintext

-- ZyXEL Communications Corporation
-- Private Enterprise MIB definition
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
-- It contains ZyXEL products OIDs, and common managed objects.
-- $Log: ZYXEL-MAC-AUTHENTICATION-MIB.mib $
-- Revision 1.5 2015/02/05 07:25:28 Alan
-- Add new feature Per VLAN MAC-Authentication
-- Revision 1.4 2013/12/06 07:06:41 ccho
-- remove uncessary imports
-- Revision 1.3 2012/09/19 07:40:35 Kevin
-- if it's leaf node, revise the vender name from zyxel to zy
-- Revision 1.2 2012/07/05 06:23:32 Kevin
-- 1. upgrade from SNMP to SNMPv2
-- 2. clean warning
-- Revision 1.1 2012/05/30 07:49:47 Kevin
-- Initial revision
ZYXEL-MAC-AUTHENTICATION-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM SNMPv2-SMI -- RFC2578
MODULE-IDENTITY
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
EnabledStatus
FROM P-BRIDGE-MIB
dot1dBasePort
FROM BRIDGE-MIB
esMgmt
FROM ZYXEL-ES-SMI;
zyxelMacAuthentication MODULE-IDENTITY
LAST-UPDATED "201207010000Z"
ORGANIZATION "Enterprise Solution ZyXEL"
CONTACT-INFO
""
DESCRIPTION
"The subtree for mac authentication"
::= { esMgmt 46 }
zyxelMacAuthenticationSetup OBJECT IDENTIFIER ::= { zyxelMacAuthentication 1 }
zyMacAuthenticationState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable MAC authentication on the switch.
MAC authentication works in a very similar way to IEEE 802.1x authentication. "
::= { zyxelMacAuthenticationSetup 1 }
zyMacAuthenticationNamePrefix OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type the prefix that is appended to all MAC addresses sent to the RADIUS server for authentication."
::= { zyxelMacAuthenticationSetup 2 }
zyMacAuthenticationPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type the password the switch sends along with the MAC address of
a client for authentication with the RADIUS server."
::= { zyxelMacAuthenticationSetup 3 }
zyMacAuthenticationTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the amount of time before the switch allows a client MAC address that fails authentication
to try and authenticate again. Maximum time is 3000 seconds."
::= { zyxelMacAuthenticationSetup 4 }
-- zyxelMacAuthenticationPortTable
zyxelMacAuthenticationPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZyxelMacAuthenticationPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains MAC authentication port configuration."
::= { zyxelMacAuthenticationSetup 5 }
zyxelMacAuthenticationPortEntry OBJECT-TYPE
SYNTAX ZyxelMacAuthenticationPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains MAC authentication port configuration."
INDEX { dot1dBasePort }
::= { zyxelMacAuthenticationPortTable 1 }
ZyxelMacAuthenticationPortEntry ::=
SEQUENCE {
zyMacAuthenticationPortState EnabledStatus,
zyMacAuthenticationPortTrustedVlan1k OCTET STRING,
zyMacAuthenticationPortTrustedVlan2k OCTET STRING,
zyMacAuthenticationPortTrustedVlan3k OCTET STRING,
zyMacAuthenticationPortTrustedVlan4k OCTET STRING
}
zyMacAuthenticationPortState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable MAC authentication on the port."
::= { zyxelMacAuthenticationPortEntry 1 }
zyMacAuthenticationPortTrustedVlan1k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is associated to this primary VLAN,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory."
::= { zyxelMacAuthenticationPortEntry 2 }
zyMacAuthenticationPortTrustedVlan2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is associated to this primary VLAN,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory."
::= { zyxelMacAuthenticationPortEntry 3 }
zyMacAuthenticationPortTrustedVlan3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is associated to this primary VLAN,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory."
::= { zyxelMacAuthenticationPortEntry 4 }
zyMacAuthenticationPortTrustedVlan4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is associated to this primary VLAN,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory."
::= { zyxelMacAuthenticationPortEntry 5 }
zyMacAuthenticationDelimiter OBJECT-TYPE
SYNTAX INTEGER {
dash(1),
colon(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delimiter used in the MAC string:
dash specifies the format xx-xx-xx-xx-xx-xx
colon specifies the format xx:xx:xx:xx:xx:xx
none specifies the format xxxxxxxxxxxx"
::= { zyxelMacAuthenticationSetup 6 }
zyMacAuthenticationCase OBJECT-TYPE
SYNTAX INTEGER {
upper(1),
lower(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This option specifies the case (upper or lower) used in the MAC string."
::= { zyxelMacAuthenticationSetup 7 }
zyMacAuthenticationPasswordType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
mac-address(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Password type specifies the use of static password or User-Name(MAC address string) as the password."
::= { zyxelMacAuthenticationSetup 8 }
END