Observium_CE/mibs/zte/ZTE-DSL-EVENT-MIB

256 lines
9.1 KiB
Plaintext

-- File Name : ZTE-DSL-EVENT-MIB.mib
-- Date : Mon Oct 17 14:13:24 GMT+08:00 2005
-- Author : ZTE Nms dept.
--
-- Zte Dsl SYS-CTRL Mib
--
--
ZTE-DSL-EVENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
zte,zxDsl
FROM ZTE-DSL-MIB
RowStatus, DisplayString
FROM SNMPv2-TC
DisplayString, ifIndex
FROM RFC1213-MIB
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, TimeTicks,
Counter32, Gauge32, Integer32, Unsigned32
FROM SNMPv2-SMI
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
zxDslEventMib MODULE-IDENTITY
LAST-UPDATED "200404151500Z"
ORGANIZATION "ZTE Corporation"
CONTACT-INFO "ma ke
Mail: zte@zte.com.cn
Tel : 021-68896477"
DESCRIPTION "This MIB defines zte dsl managed objects."
::= { zxDsl 37 }
zxDslEventObjects OBJECT IDENTIFIER ::= {zxDslEventMib 1}
zxDslEventTrapObjects OBJECT IDENTIFIER ::= {zxDslEventMib 2}
zxDslTrapSendEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable the function of sending trap to a
snmp manager."
DEFVAL { enable }
::= { zxDslEventObjects 1 }
------------------------------------------------------------------------------
-- 1.1 Event System Mgmt
------------------------------------------------------------------------------
zxDslEventCurrentEventId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It is used to indicate the current EventId.
When the agent start,this object is 0 and the agent should send a
trap to manager to request which eventId should be used by this
agent.After time out,the agent begin to use it to manage the event."
DEFVAL { 0 }
::= { zxDslEventObjects 2 }
------------------------------------------------------------------------------
-- 1.2 Event Confirmation
------------------------------------------------------------------------------
-- IMPORTANT!!
-- The mechanism of trap confirmation
------------------------------------------------------------------------------
-- The trap confirmation is often needed when the trap is a important
-- event.And this function will avoid the defect of a trap because SNMP trap is
-- based on UDP and has no confirmation, that is,a agent broadcasts a tarp and
-- dosen't care if a target manager has recieved this trap.
--
-- This mib defines the mechanism of trap confirmation to enforce
-- the reliability of trap recieving.
--
-- 1.The main skill in this mechanism is that the trap community is used to
-- bring information about confirmation.
-- 2.The information in a trap community includes the real community,
-- eventId of this trap and the key word to indiacte if this trap need
-- confirmation
-- 3.The syntax of information in a trap community is as following.
--
-- real community + '@eventId='+ eventId + '@level=' + eventLevel + '@confirm'
--
-- The community is divided into some fields by symbol '@'.These fields are
--
-- real community :the actual community in this trap
-- eventId :the event Id of this trap,it's a index of a event.
-- The value style is a name-value pair,such as
-- "eventId=145"
-- event level :the event level of this trap,it's a dispaly string
-- and the available values are:
-- critical,
-- major,
-- minor,
-- warning,
-- indeterminate,
-- cleared,
-- notification
--
-- The value style is a name-value pair,such as
-- "level=cleared"
-- confirm :If this field exist,this trap should be confirmed by
-- a manager.
-- The value style is a key word,such as "confirm"
--
--
-- Examples of a trap community,
-- 1) a trap community with confirmation
-- public@eventId=1022@level=critical@confirm
--
-- 2) a trap community without confirmation
-- public@eventId=1022@level=critical
--
--
--
-- 4.The procedures of trap sending and confirming
--
-- 1) The agent sends a trap with community including key word "confirm".
-- And begin to wait for the manager's confirmation.
-- 2) The manager recieves this trap and anaylizes its community.If the
-- key word "confirm" is found,the manager get eventId and event
-- level from this community.
-- 3) The manager sets eventId to agent's zxDslEventConfirmEventId if
-- event level isn't "cleared".
-- 4) The manager sets eventId to agent's zxDslEventConfirmClearedEventId
-- if event level is "cleared".
-- 5) When zxDslEventConfirmEventId or zxDslEventConfirmClearedEventId is
-- set,the agent should take this event as confirmed event and finishes
-- the waiting process for confirmation.
-- 6) If the agent dosen't recieved the confirmation after firt time out,
-- then go to procedure 1) until retry times is reached.
-- 7) After above procedures,the process of trap sending and confirming
-- is over.
--
------------------------------------------------------------------------------
zxDslEventConfirmEventId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The non cleard Event Id to be confirmed by a snmp manager.
When a manager recieve a trap with confirmation information,
then the manager should set this mib object to inform the agent
that this manager has got this event.And then the agent should
remove this event from a unconfirmed event queue."
::= { zxDslEventObjects 3 }
------------------------------------------------------------------------------
-- 2.3 Event Synchronization
------------------------------------------------------------------------------
zxDslEventSynchUnconfirmedEvents OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It is used to excute a process to report the unconfirmed events
again.
When this object is set,the agent should resend traps of these
unconfirmed events.And these traps still need to be confirmed by
a manager."
::= { zxDslEventObjects 4 }
zxDslEventCurrUnconfirmedEventCounter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current unconfirmed event."
::= { zxDslEventObjects 5 }
------------------------------------------------------------------------------
-- 2.4 Nms Hello Trap
------------------------------------------------------------------------------
zxDslEventNmsHelloTrapMgmt OBJECT IDENTIFIER ::= { zxDslEventObjects 6 }
zxDslEventNmsHelloTrapEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the sending Hello Trap to NMS server.
When it is enabled,the agent should send Hello Trap to NMS server
anytime and its period of sending is zxDslEventNmsHelloTrapInterval."
DEFVAL { disable }
::= { zxDslEventNmsHelloTrapMgmt 1 }
zxDslEventNmsHelloTrapInterval OBJECT-TYPE
SYNTAX Integer32(1..600)
UNITS "second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval of sending Hello Trap to NMS server."
DEFVAL { 120 }
::= { zxDslEventNmsHelloTrapMgmt 2 }
--------------------------------------------------------------------------------
-- definition of sysctrl traps.
zxDslDisabledTrapSend NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" Notification of disabled the function of sending trap to
a snmp manager."
::= { zxDslEventTrapObjects 1 }
zxDslEnabledTrapSend NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" Notification of enabled the function of sending trap to
a snmp manager."
::= { zxDslEventTrapObjects 2 }
-- NmsHelloTrap comes from ROS AN mib
zxAnEventNmsHelloTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"It is used to send heartbeat message to zte's nms server.And it
needn't to be confirmed. "
::= { zte 1015 190 6 2 }
END