WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zte/ZTE-AN-XDSL2-MIB

4564 lines
186 KiB
Plaintext
Raw Blame History

--------------------------------------------------------------------------
-- File Name : ZTE-AN-VDSL-MIB.mib
-- Date : 2007-08-15
-- Author : ZTE Nms dept.
--
-- Zte VDSL Mib for Access Node
--------------------------------------------------------------------------
ZTE-AN-XDSL2-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32,Integer32, Counter32,
NOTIFICATION-TYPE FROM SNMPv2-SMI
enterprises FROM SNMPv2-SMI
ifIndex FROM IF-MIB
DisplayString,TEXTUAL-CONVENTION,TruthValue,RowStatus FROM SNMPv2-TC
HCPerfIntervalThreshold,HCPerfTimeElapsed FROM HC-PerfHist-TC-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
xdsl2PMLineCurrEntry, xdsl2PMLineHist15MinEntry FROM VDSL2-LINE-MIB
Xdsl2Unit, Xdsl2Direction, Xdsl2Band, Xdsl2TransmissionModeType,
Xdsl2RaMode,Xdsl2InitResult,Xdsl2OperationModes,Xdsl2PowerMngState,
Xdsl2ConfPmsForce, Xdsl2LinePmMode,
Xdsl2LineLdsf,Xdsl2LdsfResult,Xdsl2SymbolProtection,
Xdsl2MaxBer,Xdsl2ScMaskDs,Xdsl2ScMaskUs,Xdsl2CarMask,
Xdsl2PsdMaskDs, Xdsl2PsdMaskUs, Xdsl2Tssi,
Xdsl2LastTransmittedState, Xdsl2LineStatus,
Xdsl2ChAtmStatus, Xdsl2ChPtmStatus, Xdsl2UpboKLF, Xdsl2BandUs,
Xdsl2LineProfiles, Xdsl2LineUs0Mask, Xdsl2LineClassMask,
Xdsl2LineLimitMask, Xdsl2LineUs0Disable, Xdsl2RfiBands,
Xdsl2LineSnrMode FROM VDSL2-LINE-TC-MIB;
zxAnXdsl2Mib MODULE-IDENTITY
LAST-UPDATED "200708161500Z"
ORGANIZATION "ZTE Corporation"
CONTACT-INFO "ZTE NMS dept.
Su Chunshan 68896292 "
DESCRIPTION "This MIB defines managed objects of zte xDSL mgmt . "
::= { zxAn 1001 }
zte OBJECT IDENTIFIER ::= { enterprises 3902 }
zxAn OBJECT IDENTIFIER ::= { zte 1015 }
zxAnXdsl2Objects OBJECT IDENTIFIER ::= {zxAnXdsl2Mib 1}
zxAnXdsl2TrapObjects OBJECT IDENTIFIER ::= {zxAnXdsl2Mib 3}
zxAnXdsl2GlobalObjects OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 1}
zxAnXdsl2Line OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 2}
zxAnXdsl2LineProfile OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 3}
zxAnXdsl2AlarmProfile OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 4}
zxAnXdsl2PMLine OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 5}
--------------------------------------------------------------------------
-- Following objects are defined.
-- 1.zxAnXdsl2LineTable
-- 2.zxAnXdsl2BaseConfProfTable
-- 3.zxAnXdsl2ServiceConfProfTable
-- 4.zxAnXdsl2DpboConfProfTable
-- 5.zxAnXdsl2UpboConfProfTable
-- 6.zxAnXdsl2AlmThreshPrfTable
-- 7.zxAnXdsl2PMLineCurrTable
-- 7.1 zxAnXdsl2PMLineHist15MinTable
-- 8.xdsl2LineBandTable see VDSL2-LINE-MIB xdsl2LineBandTable
-- 9.xdsl2ChannelStatusTable see VDSL2-LINE-MIB xdsl2ChannelStatusTable
-- 10.xdsl2SCStatusTable see VDSL2-LINE-MIB xdsl2SCStatusTable
-- 11.xdsl2LineSegmentTable see VDSL2-LINE-MIB xdsl2LineSegmentTable
-- 12.xdsl2SCStatusSegmentTable see VDSL2-LINE-MIB xdsl2SCStatusSegmentTable
-- 13.xdsl2LineInventoryTable see VDSL2-LINE-MIB xdsl2LineInventoryTable
-- 14.xdsl2PMLineCurrTable see VDSL2-LINE-MIB xdsl2PMLineCurrTable
-- 15.xdsl2PMLineCurrInitTable see VDSL2-LINE-MIB xdsl2PMLineCurrInitTable
-- 16.xdsl2PMChCurrTable see VDSL2-LINE-MIB xdsl2PMChCurrTable
-- 17.Trap
--------------------------------------------------------------------------
--------------------------------------------------------------------------
-- 1.zxAnXdsl2LineTable
--------------------------------------------------------------------------
ZxAnXdsl2TransmissionModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of xDSL line transmission modes, with one bit
per mode. The notes (F) and (L) denote Full-Rate
and Lite/splitterless respectively:
Bit 00 : Regional Std. (ANSI T1.413) (F)
Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
Bit 02 : G.992.1 POTS non-overlapped (F)
Bit 03 : G.992.1 POTS overlapped (F)
Bit 04 : G.992.1 ISDN non-overlapped (F)
Bit 05 : G.992.1 ISDN overlapped (F)
Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
Bit 07 : G.992.1 TCM-ISDN overlapped (F)
Bit 08 : G.992.2 POTS non-overlapped (L)
Bit 09 : G.992.2 POTS overlapped (L)
Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)
Bit 11 : G.992.2 with TCM-ISDN overlapped (L)
Bit 12 : G.992.1 TCM-ISDN symmetric (F) --- not in G.997.1
Bit 13-17: Reserved
Bit 18 : G.992.3 POTS non-overlapped (F)
Bit 19 : G.992.3 POTS overlapped (F)
Bit 20 : G.992.3 ISDN non-overlapped (F)
Bit 21 : G.992.3 ISDN overlapped (F)
Bit 22-23: Reserved
Bit 24 : G.992.4 POTS non-overlapped (L)
Bit 25 : G.992.4 POTS overlapped (L)
Bit 26-27: Reserved
Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F)
Bit 29 : G.992.3 Annex I All-Digital overlapped (F)
Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F)
Bit 31 : G.992.3 Annex J All-Digital overlapped (F)
Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L)
Bit 33 : G.992.4 Annex I All-Digital overlapped (L)
Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1,
wide U/S (F)
Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2,
narrow U/S(F)
Bit 36 : G.992.3 Annex L POTS overlapped, mode 3,
wide U/S (F)
Bit 37 : G.992.3 Annex L POTS overlapped, mode 4,
narrow U/S (F)
Bit 38 : G.992.3 Annex M POTS non-overlapped (F)
Bit 39 : G.992.3 Annex M POTS overlapped (F)
Bit 40 : G.992.5 POTS non-overlapped (F)
Bit 41 : G.992.5 POTS overlapped (F)
Bit 42 : G.992.5 ISDN non-overlapped (F)
Bit 43 : G.992.5 ISDN overlapped (F)
Bit 44-45: Reserved
Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)
Bit 47 : G.992.5 Annex I All-Digital overlapped (F)
Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)
Bit 49 : G.992.5 Annex J All-Digital overlapped (F)
Bit 50 : G.992.5 Annex M POTS non-overlapped (F)
Bit 51 : G.992.5 Annex M POTS overlapped (F)
Bit 52 : Reserved
Bit 53 : G.993.2 Annex A Protection
Bit 54 : G.993.2 Annex B Protection
Bit 55 : G.993.2 Annex C Protection
Bit 56 : G.993.2 Annex A
Bit 57 : G.993.2 Annex B
Bit 58 : G.993.2 Annex C
Bit 59-60: Reserved
Bit 61 : G.993.5 Annex A
Bit 62 : G.993.5 Annex B
Bit 63 : G.993.5 Annex C"
SYNTAX BITS {
ansit1413(0),
etsi(1),
g9921PotsNonOverlapped(2),
g9921PotsOverlapped(3),
g9921IsdnNonOverlapped(4),
g9921isdnOverlapped(5),
g9921tcmIsdnNonOverlapped(6),
g9921tcmIsdnOverlapped(7),
g9922potsNonOverlapeed(8),
g9922potsOverlapped(9),
g9922tcmIsdnNonOverlapped(10),
g9922tcmIsdnOverlapped(11),
g9921tcmIsdnSymmetric(12),
reserved1(13),
reserved2(14),
reserved3(15),
reserved4(16),
reserved5(17),
g9923PotsNonOverlapped(18),
g9923PotsOverlapped(19),
g9923IsdnNonOverlapped(20),
g9923isdnOverlapped(21),
reserved6(22),
reserved7(23),
g9924potsNonOverlapeed(24),
g9924potsOverlapped(25),
reserved8(26),
reserved9(27),
g9923AnnexIAllDigNonOverlapped(28),
g9923AnnexIAllDigOverlapped(29),
g9923AnnexJAllDigNonOverlapped(30),
g9923AnnexJAllDigOverlapped(31),
g9924AnnexIAllDigNonOverlapped(32),
g9924AnnexIAllDigOverlapped(33),
g9923AnnexLMode1NonOverlapped(34),
g9923AnnexLMode2NonOverlapped(35),
g9923AnnexLMode3Overlapped(36),
g9923AnnexLMode4Overlapped(37),
g9923AnnexMPotsNonOverlapped(38),
g9923AnnexMPotsOverlapped(39),
g9925PotsNonOverlapped(40),
g9925PotsOverlapped(41),
g9925IsdnNonOverlapped(42),
g9925isdnOverlapped(43),
reserved10(44),
reserved11(45),
g9925AnnexIAllDigNonOverlapped(46),
g9925AnnexIAllDigOverlapped(47),
g9925AnnexJAllDigNonOverlapped(48),
g9925AnnexJAllDigOverlapped(49),
g9925AnnexMPotsNonOverlapped(50),
g9925AnnexMPotsOverlapped(51),
reserved12(52),
g9932AnnexAProtection(53),
g9932AnnexBProtection(54),
g9932AnnexCProtection(55),
g9932AnnexA(56),
g9932AnnexB(57),
g9932AnnexC(58),
reserved16(59),
reserved17(60),
g9935AnnexA(61),
g9935AnnexB(62),
g9935AnnexC(63)
}
zxAnXdsl2LineTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2LineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2LineTable contains configuration,
command and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx).
Several objects in this table MUST be maintained in a
persistent manner. "
::= { zxAnXdsl2Line 1 }
zxAnXdsl2LineEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2LineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2LineTable contains configuration,
commands and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line."
INDEX { ifIndex }
::= { zxAnXdsl2LineTable 1 }
ZxAnXdsl2LineEntry ::=
SEQUENCE {
zxAnXdsl2LineBaseConfProfile DisplayString,
zxAnXdsl2LineSrvcConfProfile DisplayString,
zxAnXdsl2LineDpboConfProfile DisplayString,
zxAnXdsl2LineUpboConfProfile DisplayString,
zxAnXdsl2LineAlmThreshPrfName DisplayString,
zxAnXdsl2LineCmndConfPmsf Xdsl2ConfPmsForce,
zxAnXdsl2LineCmndConfLdsf Xdsl2LineLdsf,
zxAnXdsl2LineCmndConfLdsfFailReason Xdsl2LdsfResult,
zxAnXdsl2LineCmndAutomodeColdStart TruthValue,
zxAnXdsl2LineStatusXtuTransSys ZxAnXdsl2TransmissionModeType,
zxAnXdsl2LineStatusPwrMngState Xdsl2PowerMngState,
zxAnXdsl2LineStatusInitResult INTEGER,
zxAnXdsl2LineStatusLastStateDs Xdsl2LastTransmittedState,
zxAnXdsl2LineStatusLastStateUs Xdsl2LastTransmittedState,
zxAnXdsl2LineStatusXtur BITS,
zxAnXdsl2LineStatusXtuc BITS,
zxAnXdsl2LineStatusAttainableRateDs Unsigned32,
zxAnXdsl2LineStatusAttainableRateUs Unsigned32,
zxAnXdsl2LineStatusActPsdDs Integer32,
zxAnXdsl2LineStatusActPsdUs Integer32,
zxAnXdsl2LineStatusActAtpDs Integer32,
zxAnXdsl2LineStatusActAtpUs Integer32,
zxAnXdsl2LineStatusActStandardPrf INTEGER,
zxAnXdsl2LineDataPathType INTEGER,
zxAnXdsl2LineStatusActLimitMask INTEGER,
--zxAnXdsl2LineStatusActUs0Mask Xdsl2LineUs0Mask,
zxAnXdsl2LineStatusActSnrModeDs Xdsl2LineSnrMode,
zxAnXdsl2LineStatusActSnrModeUs Xdsl2LineSnrMode,
zxAnXdsl2LineStatusElectricalLength Unsigned32,
zxAnXdsl2LineStatusTrellisDs TruthValue,
zxAnXdsl2LineStatusTrellisUs TruthValue,
zxAnXdsl2LineStatusActualCe Unsigned32,
zxAnXdsl2LineStatusOperState INTEGER,
zxAnXdsl2LineStatusActDataPathType INTEGER,
zxAnXdsl2LineCmndPMReset BITS,
zxAnXdsl2LineExtConfProfile DisplayString,
zxAnXdsl2LineStatusLnAttenDs Integer32,
zxAnXdsl2LineStatusLnAttenUs Integer32,
zxAnXdsl2LineStatusSigAttenDs Integer32,
zxAnXdsl2LineStatusSigAttenUs Integer32,
zxAnXdsl2LineStatusSnrMarginDs Integer32,
zxAnXdsl2LineStatusSnrMarginUs Integer32,
zxAnXdsl2LineLofStatsDs Counter32,
zxAnXdsl2LineLofStatsUs Counter32,
zxAnXdsl2LineLolStatsDs Counter32,
zxAnXdsl2LineLolStatsUs Counter32,
zxAnXdsl2LineLprStatsDs Counter32,
zxAnXdsl2LineLprStatsUs Counter32
}
zxAnXdsl2LineBaseConfProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Basic Profile Table, (zxAnZxAnXdsl2BaseConfProfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "DEFVAL" }
::= { zxAnXdsl2LineEntry 1 }
zxAnXdsl2LineSrvcConfProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Service Profile Table, (zxAnZxAnXdsl2ServiceConfProfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "DEFVAL" }
::= { zxAnXdsl2LineEntry 2 }
zxAnXdsl2LineDpboConfProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Dpbo Profile Table, (zxAnZxAnXdsl2DpboConfProfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "DEFVAL" }
::= { zxAnXdsl2LineEntry 3 }
zxAnXdsl2LineUpboConfProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Upbo Profile Table, (zxAnXdsl2UpboConfProfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "DEFVAL" }
::= { zxAnXdsl2LineEntry 4 }
zxAnXdsl2LineAlmThreshPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line
Alarm Configuration Profile Table,
(zxAnXdsl2LineAlarmConfProfTable), which applies to this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "DEFVAL" }
::= { zxAnXdsl2LineEntry 5 }
zxAnXdsl2LineCmndConfPmsf OBJECT-TYPE
SYNTAX Xdsl2ConfPmsForce
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Power management state forced (PMSF). Defines the line
states to be forced by the near-end xTU on this line.
The various possible values are:
l3toL0 (0),
l0toL2 (2),
l0orL2toL3 (3).
This object MUST be maintained in a persistent manner."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.3"
DEFVAL { l3toL0 }
::= { zxAnXdsl2LineEntry 6 }
zxAnXdsl2LineCmndConfLdsf OBJECT-TYPE
SYNTAX Xdsl2LineLdsf
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loop diagnostics mode forced (LDSF). Defines whether the
line
should be forced into the loop diagnostics mode by the
near-end xTU on this line or only be responsive to loop
diagnostics initiated by the far-end xTU.
This object MUST be maintained in a persistent manner.
However, in case the operator forces loop diagnostics mode
then the access node should reset the object (inhibit) when
loop diagnostics mode procedures are completed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.8"
DEFVAL { inhibit }
::= { zxAnXdsl2LineEntry 7 }
zxAnXdsl2LineCmndConfLdsfFailReason OBJECT-TYPE
SYNTAX Xdsl2LdsfResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the recent occasion the Loop diagnostics mode
forced (LDSF) was issued for the associated line. Possible
values are:
none (1) - The default value in case LDSF was never
requested for the associated line.
success (2) - The recent command completed
successfully.
inProgress (3) - The Loop Diagnostics process is in
progress.
unsupported (4) - The NE or the line card doesn't support
LDSF.
cannotRun (5) - The NE cannot initiate the command, due
to a non specific reason.
aborted (6) - The Loop Diagnostics process aborted.
failed (7) - The Loop Diagnostics process failed.
illegalMode (8) - The NE cannot initiate the command, due
to the specific mode of the relevant
line.
adminUp (9) - The NE cannot initiate the command, as
the relevant line is administratively
'Up'.
tableFull (10)- The NE cannot initiate the command, due
to reaching the maximum number of rows
in the results table.
noResources (11)- The NE cannot initiate the command, due
to lack of internal memory resources."
DEFVAL { none }
::= { zxAnXdsl2LineEntry 8 }
zxAnXdsl2LineCmndAutomodeColdStart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Automode cold start forced. This parameter is defined
in order to improve testing of the performance of xTUs
supporting automode when it is enabled in the MIB.
Change the value of this parameter to 'true' indicates
a change in loop conditions applied to the devices under
test. The xTUs shall reset any historical information
used for automode and for shortening G.994.1 handshake
and initialization.
Automode is the case where multiple operation-modes are
enabled through the zxAnXdsl2LConfProfXtuTransSysEna object
in the line configuration profile being used for the
line, and where the selection of the actual
operation-mode depends not only on the common
capabilities of both xTUs (as exchanged in G.994.1), but
also on achievable data rates under given loop
conditions.
This object MUST be maintained in a persistent manner."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.10"
DEFVAL { false }
::= { zxAnXdsl2LineEntry 9 }
zxAnXdsl2LineStatusXtuTransSys OBJECT-TYPE
SYNTAX ZxAnXdsl2TransmissionModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The xTU Transmission System (xTS) in use.
It is coded in a bit-map representation with one bit set to
'1' (the selected coding for the DSL line). This
parameter
may be derived from the handshaking procedures defined in
Recommendation G.994.1. A set of xDSL line transmission
modes, with one bit per mode. "
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.1"
::= { zxAnXdsl2LineEntry 10 }
zxAnXdsl2LineStatusPwrMngState OBJECT-TYPE
SYNTAX Xdsl2PowerMngState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current power management state. One of four possible
power management states:
L0 - Synchronized and full transmission (i.e., Showtime),
L1 - Low Power with reduced net data rate (G.992.2 only),
L2 - Low Power with reduced net data rate (G.992.3 and
G.992.4 only),
L3 - No power
The various possible values are:l0(1), l1(2), l2(3), l3(4)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.2"
::= { zxAnXdsl2LineEntry 11 }
zxAnXdsl2LineStatusInitResult OBJECT-TYPE
SYNTAX INTEGER {
noFail (0),
configError (1),
configNotFeasible (2),
commFail (3),
noPeerAtu (4),
otherCause (5),
protocolInitFailure (254)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the last full initialization
performed on the line. It is an enumeration type with the following
values: noFail(0), configError(1), configNotFeasible(2),
commFail(3), noPeerAtu(4), otherCause(5), protocolInitFailure(254).
noFail (0) - Successful initialization.
configError (1) - Configuration failure.
configNotFeasible (2) - Configuration details not supported.
commFail (3) - Communication failure.
noPeerAtu (4) - Peer ATU not detected.
otherCause (5) - Other initialization failure.
protocolInitFailure (254) - Protocol initialization failure.
"
::= { zxAnXdsl2LineEntry 12 }
zxAnXdsl2LineStatusLastStateDs OBJECT-TYPE
SYNTAX Xdsl2LastTransmittedState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last successful transmitted initialization state in
the downstream direction in the last full initialization
performed on the line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.4"
::= { zxAnXdsl2LineEntry 13 }
zxAnXdsl2LineStatusLastStateUs OBJECT-TYPE
SYNTAX Xdsl2LastTransmittedState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last successful transmitted initialization state in the
upstream direction in the last full initialization performed
on the line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.5"
::= { zxAnXdsl2LineEntry 14 }
zxAnXdsl2LineStatusXtur OBJECT-TYPE
SYNTAX BITS {
noDefect (0),
lossOfFraming (1),
lossOfSignal (2),
lossOfPower (3),
unused (4),
lossOfSignalQuality (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current state (existing failures) of the xTU-R.
This is a bit-map of possible conditions.
This BITS structure can report the following failures:
noDefect (0) - This bit position positively reports that
no defect or failure exist.
lossOfFraming (1) - xTU-R failure due to loss of frame
synchronization.
lossOfSignal (2) - xTU-R failure due to loss of signal.
lossOfPower (3) - xTU-R failure due to loss of power.Usually
this failure may be reported for CPE units
only.
unused (4) - This bit is never active on xTU-R.
lossOfSignalQuality (5) - Loss of Signal Quality is declared when
the Noise Margin falls below the Minimum
Noise Margin, or the bit-error-rate
exceeds 10^-7.
"
::= { zxAnXdsl2LineEntry 15 }
zxAnXdsl2LineStatusXtuc OBJECT-TYPE
SYNTAX BITS {
noDefect (0),
lossOfFraming (1),
lossOfSignal (2),
lossOfPower (3),
initFailure (4),
lossOfSignalQuality (5),
lossOfLink (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current state (existing failures) of the xTU-C.
This is a bit-map of possible conditions.
This BITS structure can report the following failures:
noDefect (0) - This bit position positively reports that
no defect or failure exist.
lossOfFraming (1) - xTU-C failure due to loss of frame
synchronization.
lossOfSignal (2) - xTU-C failure due to loss of signal.
lossOfPower (3) - xTU-C failure due to loss of power.Usually
this failure may be reported for CPE units
only.
initFailure (4) - Recent initialization process failed.
lossOfSignalQuality (5) - Loss of Signal Quality is declared when
the Noise Margin falls below the Minimum
Noise Margin, or the bit-error-rate
exceeds 10^-7.
lossOfLink (6) - xTU-C failure due to inability to link
with xTU-R.
"
::= { zxAnXdsl2LineEntry 16 }
zxAnXdsl2LineStatusAttainableRateDs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate currently attainable by
the xTU-C transmitter and the xTU-R receiver, coded in
bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.12"
::= { zxAnXdsl2LineEntry 17 }
zxAnXdsl2LineStatusAttainableRateUs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the
xTU-R transmitter and the xTU-C receiver, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.13"
::= { zxAnXdsl2LineEntry 18 }
zxAnXdsl2LineStatusActPsdDs OBJECT-TYPE
SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB
(Physical values are -90 to 0 dBm/Hz).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.14"
::= { zxAnXdsl2LineEntry 19 }
zxAnXdsl2LineStatusActPsdUs OBJECT-TYPE
SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (Physical values
are -90 to 0 dBm/Hz).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.15"
::= { zxAnXdsl2LineEntry 20 }
zxAnXdsl2LineStatusActAtpDs OBJECT-TYPE
SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Aggregate Transmit Power Downstream. The total
amount
of transmit power delivered by the xTU-C at the U-C reference
point, at the instant of measurement. It ranges from -310 to
310 units of 0.1 dB (Physical values are -31 to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.16"
::= { zxAnXdsl2LineEntry 21 }
zxAnXdsl2LineStatusActAtpUs OBJECT-TYPE
SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Aggregate Transmit Power Upstream. The total amount
of
transmit power delivered by the xTU-R at the U-R
reference point, at the instant of measurement. It ranges
from -310 to 310 units of 0.1 dB (Physical values are -31
to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.17"
::= { zxAnXdsl2LineEntry 22 }
zxAnXdsl2LineStatusActStandardPrf OBJECT-TYPE
SYNTAX INTEGER {
g993_2_8A (1),
g993_2_8B (2),
g993_2_8C (3),
g993_2_8D (4),
g993_2_12A (5),
g993_2_12B (6),
g993_2_17A (7),
g993_2_30A (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Standard Profile used by this connection."
::= { zxAnXdsl2LineEntry 23 }
zxAnXdsl2LineDataPathType OBJECT-TYPE
SYNTAX INTEGER {
atm(1),
ptm(2),
stm(3),
auto(4) -- negotiate automatically
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Data path type of this line."
::= { zxAnXdsl2LineEntry 24 }
zxAnXdsl2LineStatusActLimitMask OBJECT-TYPE
SYNTAX INTEGER
{
annexA_D32(0),
annexA_D64(8),
annexA_D128(16),
annexB_B7_1_997_M1c_A_7 (32),
annexB_B7_2_997_M1x_M_8 (33),
annexB_B7_3_997_M1x_M (34),
annexB_B7_4_997_M2x_M_8 (35),
annexB_B7_5_997_M2x_A (36),
annexB_B7_6_997_M2x_M (37),
annexB_B7_7_HPE17_M1_NUS0 (38),
annexB_B7_8_HPE30_M1_NUS0 (39),
annexB_B7_9_997E17_M2x_NUS0(40),
annexB_B7_10_997E30_M2x_NUS0(41),
annexB_B8_1_998_M1_x_A (64),
annexB_B8_2_998_M1x_B (65),
annexB_B8_3_998_M1x_NUS0 (66),
annexB_B8_4_998_M2x_A (67),
annexB_B8_5_998_M2x_M (68),
annexB_B8_6_998_M2x_B (69),
annexB_B8_7_998_M2x_NUS0 (70),
annexB_B8_8_998E17_M2x_NUS0 (71),
annexB_B8_9_998E17_M2x_NUS0_M (72),
annexB_B8_10_998ADE17_M2x_NUS0_M(73),
annexB_B8_11_998ADE17_M2x_A (74),
annexB_B8_12_998ADE17_M2x_B (75),
annexB_B8_13_998E30_M2x_NUS0 (76),
annexB_B8_14_998E30_M2x_NUS0_M (77),
annexB_B8_15_998ADE30_M2x_NUS0_M(78),
annexB_B8_16_998ADE30_M2x_NUS0_A(79),
annexC_Pots(96),
annexC_Tcm_Isdn(97)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Limit PSD mask and band plan in use.
The configuration parameter xdsl2LConfProfLimitMask defines
the set of allowed G.993.2 limit PSD masks.
This parameter indicates the limit PSD mask in use on
this line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.3"
DEFVAL { {} }
::= { zxAnXdsl2LineEntry 25 }
-- zxAnXdsl2LineStatusActUs0Mask OBJECT-TYPE
-- SYNTAX Xdsl2LineUs0Mask
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The US0 PSD mask in use.
-- The configuration parameter xdsl2LConfProfUs0Mask defines
-- the set of allowed US0 PSD masks.
-- This parameter indicates the US0 PSD mask in use on
-- this line.
-- This parameter may be derived from the handshaking
-- procedures defined in ITU-T Rec. G.994.1."
-- REFERENCE "ITU-T G.997.1, paragraph #7.5.1.4"
-- DEFVAL { {} }
-- ::= { zxAnXdsl2LineEntry 26 }
zxAnXdsl2LineStatusActSnrModeDs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates if the transmitter
referred virtual noise is active on the line in the
downstream direction.
The configuration parameter xdsl2LConfProfSnrModeDs
is used to configure referred virtual noise."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.15 (ACTSNRMODEds)"
DEFVAL { virtualNoiseDisabled }
::= { zxAnXdsl2LineEntry 26 }
zxAnXdsl2LineStatusActSnrModeUs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates if the transmitter
referred virtual noise is active on the line in the
upstream direction.
The configuration parameter xdsl2LConfProfSnrModeUs is
used to configure referred virtual noise."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.18 (ACTSNRMODEus)"
DEFVAL { virtualNoiseDisabled }
::= { zxAnXdsl2LineEntry 27 }
zxAnXdsl2LineStatusElectricalLength OBJECT-TYPE
SYNTAX Unsigned32 (0..1280)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"(UPBOKLE)
This parameter contains the estimated electrical length
expressed in dB at 1 MHz, kl0. This is the final electrical
length that would have been sent from the VTU-O to VTU-R if
the electrical length was not forced by the CO-MIB.
The value ranges from 0 to 128 dB in steps of 0.1 dB."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.23"
DEFVAL { 0 }
::= { zxAnXdsl2LineEntry 28 }
zxAnXdsl2LineStatusTrellisDs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter reports whether trellis coding
is in use in the downstream direction."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.30"
DEFVAL { false }
::= { zxAnXdsl2LineEntry 29 }
zxAnXdsl2LineStatusTrellisUs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter reports whether trellis coding
is in use in the upstream direction."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.31"
DEFVAL { false }
::= { zxAnXdsl2LineEntry 30 }
zxAnXdsl2LineStatusActualCe OBJECT-TYPE
SYNTAX Unsigned32 (2..16)
UNITS "N/32 samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"(ACTUALCE)
This parameter reports the cyclic extension
used on the line. It is coded as an unsigned integer from
2 to 16 in units of N/32 samples, where 2N is the IDFT size."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.32"
DEFVAL { 2 }
::= { zxAnXdsl2LineEntry 31 }
zxAnXdsl2LineStatusOperState OBJECT-TYPE
SYNTAX INTEGER
{
idle(1),
handshake(2),
training(3),
testing(4), -- such as DELT,HYBRID,TX test.
showtime(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the line."
::= { zxAnXdsl2LineEntry 32 }
zxAnXdsl2LineStatusActDataPathType OBJECT-TYPE
SYNTAX INTEGER {
atm(1),
ptm(2),
stm(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual data path type of this line."
::= { zxAnXdsl2LineEntry 33 }
zxAnXdsl2LineCmndPMReset OBJECT-TYPE
SYNTAX BITS {
currentPerf(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the performance monitoring results of single line.
currentPerf(0) - reset the current performance monitoring results.
it will affect only current real-time PM object,
such as zxAnXdsl2PMChCurrTransmittedBlks,
zxAnXdsl2PMChCurrOverflowBlks and
zxAnXdsl2PMChCurrErroredBlks.
The PM result of history will not be reset,
and the current PM result of 15 minutes and 1 day
will be unaffected too.
"
::= { zxAnXdsl2LineEntry 34 }
zxAnXdsl2LineExtConfProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Ext Profile Table, (zxAnXdsl2LnExtConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LineEntry 35 }
zxAnXdsl2LineStatusLnAttenDs OBJECT-TYPE
SYNTAX Integer32(0..1270)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream line Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carriers
of that band during initialization.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all sub-carriers
of that band during initialization.
Values range from 0 to 1270 in units of 0.1 dB (Physical values
are 0 to 127 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
and paragraph #7.5.1.10 (LATNus)6"
::= { zxAnXdsl2LineEntry 36 }
zxAnXdsl2LineStatusLnAttenUs OBJECT-TYPE
SYNTAX Integer32(0..1270)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream line Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carriers
of that band during initialization.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all sub-carriers
of that band during initialization.
Values range from 0 to 1270 in units of 0.1 dB (Physical values
are 0 to 127 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
and paragraph #7.5.1.10 (LATNus)6"
::= { zxAnXdsl2LineEntry 37 }
zxAnXdsl2LineStatusSigAttenDs OBJECT-TYPE
SYNTAX Integer32(0..1270)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream signal Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carriers
of that band during Showtime.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all sub-carriers
of that band during Showtime.
Values range from 0 to 1270 in units of 0.1 dB (Physical values
are 0 to 127 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
and paragraph #7.5.1.12 (SATNus)"
::= { zxAnXdsl2LineEntry 38 }
zxAnXdsl2LineStatusSigAttenUs OBJECT-TYPE
SYNTAX Integer32(0..1270)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream signal Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carriers
of that band during Showtime.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all sub-carriers
of that band during Showtime.
Values range from 0 to 1270 in units of 0.1 dB (Physical values
are 0 to 127 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
and paragraph #7.5.1.12 (SATNus)"
::= { zxAnXdsl2LineEntry 39 }
zxAnXdsl2LineStatusSnrMarginDs OBJECT-TYPE
SYNTAX Integer32(-640..630)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such that
the BER requirements are met for all bearer channels received
at the XTU. Values range from -640 to 630 in units of 0.1 dB
(Physical values are -64 to 63 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.13 (SNRMds)
and paragraph #7.5.1.14 (SNRMpbds)
and paragraph #7.5.1.16 (SNRMus)
and paragraph #7.5.1.17 (SNRMpbus)"
::= { zxAnXdsl2LineEntry 40 }
zxAnXdsl2LineStatusSnrMarginUs OBJECT-TYPE
SYNTAX Integer32(-640..630)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such that
the BER requirements are met for all bearer channels received
at the XTU. Values range from -640 to 630 in units of 0.1 dB
(Physical values are -64 to 63 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.13 (SNRMds)
and paragraph #7.5.1.14 (SNRMpbds)
and paragraph #7.5.1.16 (SNRMus)
and paragraph #7.5.1.17 (SNRMpbus)"
::= { zxAnXdsl2LineEntry 41 }
zxAnXdsl2LineLofStatsDs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream count of times that there was LOF."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LineEntry 42 }
zxAnXdsl2LineLofStatsUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream count of times that there was LOF."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LineEntry 43 }
zxAnXdsl2LineLolStatsDs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream count of times that there was LOL."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LineEntry 44 }
zxAnXdsl2LineLolStatsUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream count of times that there was LOF."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LineEntry 45 }
zxAnXdsl2LineLprStatsDs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream count of times that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LineEntry 46 }
zxAnXdsl2LineLprStatsUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream count of times that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LineEntry 47 }
--------------------------------------------------------------------------
-- 2.zxAnXdsl2BaseConfProfTable
--------------------------------------------------------------------------
zxAnXdsl2BaseConfProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2BaseConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2BaseConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 1 }
zxAnXdsl2BaseConfProfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2BaseConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2BaseConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2BaseConfProfileName }
::= { zxAnXdsl2BaseConfProfTable 1 }
ZxAnXdsl2BaseConfProfEntry ::=
SEQUENCE {
zxAnXdsl2BaseConfProfileName DisplayString,
zxAnXdsl2LConfProfXtuTransSysEna ZxAnXdsl2TransmissionModeType,
zxAnXdsl2LConfProfStandardProfile Xdsl2LineProfiles,
zxAnXdsl2LConfProfLimitMask BITS,
zxAnXdsl2LConfProfUs0Disable INTEGER,
zxAnXdsl2LConfProfUs0Mask Xdsl2LineUs0Mask,
zxAnXdsl2LConfProfRfiBandsDs Xdsl2RfiBands,
zxAnXdsl2LConfProfVdsl2CarMask Xdsl2CarMask,
zxAnXdsl2LConfProfVdslMaxNomAtpDs Unsigned32,
zxAnXdsl2LConfProfVdslMaxNomAtpUs Unsigned32,
zxAnXdsl2LConfProfVdslMaxNomPsdDs Integer32,
zxAnXdsl2LConfProfVdslMaxNomPsdUs Integer32,
zxAnXdsl2LConfProfVdslMaxAggRxPwrUs Integer32,
zxAnXdsl2LConfProfAdslMaxNomAtpDs Unsigned32,
zxAnXdsl2LConfProfAdslMaxNomAtpUs Unsigned32,
zxAnXdsl2LConfProfAdslMaxNomPsdDs Integer32,
zxAnXdsl2LConfProfAdslMaxNomPsdUs Integer32,
zxAnXdsl2LConfProfAdslMaxAggRxPwrUs Integer32,
zxAnXdsl2LConfProfScMaskDs Xdsl2ScMaskDs,
zxAnXdsl2LConfProfScMaskUs Xdsl2ScMaskUs,
zxAnXdsl2LConfProfRaUsNrmDs Unsigned32,
zxAnXdsl2LConfProfRaUsNrmUs Unsigned32,
zxAnXdsl2LConfProfRaUsTimeDs Unsigned32,
zxAnXdsl2LConfProfRaUsTimeUs Unsigned32,
zxAnXdsl2LConfProfRaDsNrmsDs Unsigned32,
zxAnXdsl2LConfProfRaDsNrmsUs Unsigned32,
zxAnXdsl2LConfProfRaDsTimeDs Unsigned32,
zxAnXdsl2LConfProfRaDsTimeUs Unsigned32,
zxAnXdsl2LConfProfMsgMinUs Unsigned32,
zxAnXdsl2LConfProfMsgMinDs Unsigned32,
zxAnXdsl2LConfProfPmMode Xdsl2LinePmMode,
zxAnXdsl2LConfProfL0Time Unsigned32,
zxAnXdsl2LConfProfL2Time Unsigned32,
zxAnXdsl2LConfProfL2Atpr Unsigned32,
zxAnXdsl2LConfProfL2Atprt Unsigned32,
zxAnXdsl2LConfProfPsdMaskDs Xdsl2PsdMaskDs,
zxAnXdsl2LConfProfPsdMaskUs Xdsl2PsdMaskUs,
zxAnXdsl2LConfProfPsdMaskSelectUs Unsigned32,
zxAnXdsl2LConfProfTrellisDs INTEGER,
zxAnXdsl2LConfProfTrellisUs INTEGER,
zxAnXdsl2LConfProfBitswapDs INTEGER,
zxAnXdsl2LConfProfBitswapUs INTEGER,
zxAnXdsl2LConfProfRetrainMode INTEGER,
zxAnXdsl2LconfProfSnrModeDs INTEGER,
zxAnXdsl2LconfProfSnrModeUs INTEGER,
zxAnXdsl2LConfProfTxRefVNDs OCTET STRING ,
zxAnXdsl2LConfProfTxRefVNUs OCTET STRING ,
zxAnXdsl2Ch1ConfProfMinResDataRateDs Unsigned32,
zxAnXdsl2Ch1ConfProfMinResDataRateUs Unsigned32,
zxAnXdsl2Ch1ConfProfMinDataRateLowPwrDs Unsigned32,
zxAnXdsl2Ch1ConfProfMaxBerDs Xdsl2MaxBer,
zxAnXdsl2Ch1ConfProfMaxBerUs Xdsl2MaxBer,
zxAnXdsl2Ch1ConfProfImaEnabled TruthValue,
zxAnXdsl2Ch2ConfProfMinResDataRateDs Unsigned32,
zxAnXdsl2Ch2ConfProfMinResDataRateUs Unsigned32,
zxAnXdsl2Ch2ConfProfMinDataRateLowPwrDs Unsigned32,
zxAnXdsl2Ch2ConfProfMaxBerDs Xdsl2MaxBer,
zxAnXdsl2Ch2ConfProfMaxBerUs Xdsl2MaxBer,
zxAnXdsl2Ch2ConfProfImaEnabled TruthValue,
zxAnXdsl2LConfProfRowStatus RowStatus
}
zxAnXdsl2BaseConfProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2BaseConfProfEntry 1 }
zxAnXdsl2LConfProfXtuTransSysEna OBJECT-TYPE
SYNTAX ZxAnXdsl2TransmissionModeType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"xTU Transmission System Enabling (xTSE). A list of the
different coding types enabled in this profile. It is coded
in a bit-map representation with 1 or more bits set. A bit
set to '1' means that the xTUs may apply the respective
coding for the DSL line. A bit set to '0' means that
the xTUs cannot apply the respective coding for the ADSL
line. All 'reserved' bits should be set to '0'."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.1"
::= { zxAnXdsl2BaseConfProfEntry 2 }
zxAnXdsl2LConfProfStandardProfile OBJECT-TYPE
SYNTAX Xdsl2LineProfiles
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of profiles which allows the transceivers to support
a subset of allowed settings, as defined in G.993.2 Recommendation."
::= { zxAnXdsl2BaseConfProfEntry 3 }
zxAnXdsl2LConfProfLimitMask OBJECT-TYPE
SYNTAX BITS {
annexA_D32(0),
annexA_D64(8),
annexA_D128(16),
annexB_B7_1_997_M1c_A_7 (32),
annexB_B7_2_997_M1x_M_8 (33),
annexB_B7_3_997_M1x_M (34),
annexB_B7_4_997_M2x_M_8 (35),
annexB_B7_5_997_M2x_A (36),
annexB_B7_6_997_M2x_M (37),
annexB_B7_7_HPE17_M1_NUS0 (38),
annexB_B7_8_HPE30_M1_NUS0 (39),
annexB_B7_9_997E17_M2x_NUS0(40),
annexB_B7_10_997E30_M2x_NUS0(41),
annexB_B8_1_998_M1_x_A (64),
annexB_B8_2_998_M1x_B (65),
annexB_B8_3_998_M1x_NUS0 (66),
annexB_B8_4_998_M2x_A (67),
annexB_B8_5_998_M2x_M (68),
annexB_B8_6_998_M2x_B (69),
annexB_B8_7_998_M2x_NUS0 (70),
annexB_B8_8_998E17_M2x_NUS0 (71),
annexB_B8_9_998E17_M2x_NUS0_M (72),
annexB_B8_10_998ADE17_M2x_NUS0_M(73),
annexB_B8_11_998ADE17_M2x_A (74),
annexB_B8_12_998ADE17_M2x_B (75),
annexB_B8_13_998E30_M2x_NUS0 (76),
annexB_B8_14_998E30_M2x_NUS0_M (77),
annexB_B8_15_998ADE30_M2x_NUS0_M(78),
annexB_B8_16_998ADE30_M2x_NUS0_A(79),
annexC_Pots(96),
annexC_Tcm_Isdn(97)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Limit Mask of the line. "
::= { zxAnXdsl2BaseConfProfEntry 4 }
zxAnXdsl2LConfProfUs0Disable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Enable or disable the use of US0."
::= { zxAnXdsl2BaseConfProfEntry 5 }
zxAnXdsl2LConfProfUs0Mask OBJECT-TYPE
SYNTAX Xdsl2LineUs0Mask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of profiles which allows the transceivers to support
a subset of allowed settings, as defined in G.993.2 Recommendation."
::= { zxAnXdsl2BaseConfProfEntry 6 }
zxAnXdsl2LConfProfRfiBandsDs OBJECT-TYPE
SYNTAX Xdsl2RfiBands
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RfiBands configured in the downstream."
::= { zxAnXdsl2BaseConfProfEntry 7 }
zxAnXdsl2LConfProfVdsl2CarMask OBJECT-TYPE
SYNTAX Xdsl2CarMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(VDSL2-CARMASK).
VDSL2 specific Sub-carriers mask. This configuration
parameter defines the restrictions, additional to the band
plan, to determine the set of subcarriers allowed for
transmission in both upstream and downstream directions.
The parameter shall describe the not masked subcarriers as
one or more frequency bands. Each band is represented by
start and stop subcarrier indices with a subcarrier
spacing of 4.3125kHz. The valid range of subcarrier indices
run from 0 to at least the index of the highest allowed
subcarrier in both transmission directions among all
profiles enabled by the parameter zxAnXdsl2LConfProfProfiles.
Up to 32 bands may be specified. Other subcarriers shall
be masked."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.8"
::= { zxAnXdsl2BaseConfProfEntry 8 }
zxAnXdsl2LConfProfVdslMaxNomAtpDs OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMATPds).
The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25.5 dBm)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.3"
DEFVAL { 255 }
::= { zxAnXdsl2BaseConfProfEntry 9 }
zxAnXdsl2LConfProfVdslMaxNomAtpUs OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMATPus).
The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
dBm)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.4"
DEFVAL { 255 }
::= { zxAnXdsl2BaseConfProfEntry 10 }
zxAnXdsl2LConfProfVdslMaxNomPsdDs OBJECT-TYPE
SYNTAX Integer32(-600..-300)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMPSDds).
The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz). "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.1"
DEFVAL { -300 }
::= { zxAnXdsl2BaseConfProfEntry 11 }
zxAnXdsl2LConfProfVdslMaxNomPsdUs OBJECT-TYPE
SYNTAX Integer32(-600..-300)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMPSDus).
The maximum nominal transmit PSD in the upstream direction
during initialization and Showtime. It ranges from -600 to
-300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz). "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.2"
DEFVAL { -300 }
::= { zxAnXdsl2BaseConfProfEntry 12 }
zxAnXdsl2LConfProfVdslMaxAggRxPwrUs OBJECT-TYPE
SYNTAX Integer32(-255..255 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXRXPWRus).
The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The xTU-C should verify that the
upstream power cutback is such that this maximum aggregate
receive power value is honored. It ranges from -255 to 255
units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
A value of 0x7FFFFFFF (2147483647) means that there is no
limit."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.5"
DEFVAL { 255 }
::= { zxAnXdsl2BaseConfProfEntry 13 }
zxAnXdsl2LConfProfAdslMaxNomAtpDs OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMATPds).
The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25.5 dBm)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.3"
DEFVAL { 255 }
::= { zxAnXdsl2BaseConfProfEntry 14 }
zxAnXdsl2LConfProfAdslMaxNomAtpUs OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMATPus).
The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
dBm)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.4"
DEFVAL { 255 }
::= { zxAnXdsl2BaseConfProfEntry 15 }
zxAnXdsl2LConfProfAdslMaxNomPsdDs OBJECT-TYPE
SYNTAX Integer32(-600..-300)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMPSDds).
The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz). "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.1"
DEFVAL { -300 }
::= { zxAnXdsl2BaseConfProfEntry 16 }
zxAnXdsl2LConfProfAdslMaxNomPsdUs OBJECT-TYPE
SYNTAX Integer32(-600..-300)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMPSDus).
The maximum nominal transmit PSD in the upstream direction
during initialization and Showtime. It ranges from -600 to
-300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz). "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.2"
DEFVAL { -300 }
::= { zxAnXdsl2BaseConfProfEntry 17 }
zxAnXdsl2LConfProfAdslMaxAggRxPwrUs OBJECT-TYPE
SYNTAX Integer32(-255..255 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXRXPWRus).
The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The xTU-C should verify that the
upstream power cutback is such that this maximum aggregate
receive power value is honored. It ranges from -255 to 255
units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
A value of 0x7FFFFFFF (2147483647) means that there is no
limit."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.5"
DEFVAL { 255 }
::= { zxAnXdsl2BaseConfProfEntry 18 }
zxAnXdsl2LConfProfScMaskDs OBJECT-TYPE
SYNTAX Xdsl2ScMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Sub-carriers mask. A bitmap of 4096 bits that allows
masking
up to 4096 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCds) is set to '1', the
respective
downstream sub-carrier i is masked, and if set to '0',
the
respective sub-carrier is unmasked. Note that there should
always be unmasked sub-carriers (i.e., the object cannot be
all 1's). Also note that if NSCds < 4096, all bits
i (NSCds i <= 4096) should be set to '1'."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.6"
::= { zxAnXdsl2BaseConfProfEntry 19 }
zxAnXdsl2LConfProfScMaskUs OBJECT-TYPE
SYNTAX Xdsl2ScMaskUs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Sub-carriers mask. A bitmap of 4096 bits that allows
masking
up to 4096 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCus) is set to '1', the
respective
upstream sub-carrier i is masked, and if set to '0',
the
respective sub-carrier is unmasked. Note that there
should always be unmasked sub-carriers (i.e., the object
cannot be all 1's). Also note that if NSCus <
4096, all bits i (NSCus < i <= 4096) should be set to
'1'."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.7"
::= { zxAnXdsl2BaseConfProfEntry 20 }
zxAnXdsl2LConfProfRaUsNrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Up-Shift Noise Margin value, to be used when
zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. If the downstream
noise margin is above this value and stays above it for
more than the time specified by the zxAnXdsl2LConfProfRaUsTimeDs,
the xTU-R shall attempt to increase the downstream net data
rate. The Downstream Up-shift Noise Margin ranges from 0 to
310 units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.3"
DEFVAL { 10 }
::= { zxAnXdsl2BaseConfProfEntry 21 }
zxAnXdsl2LConfProfRaUsNrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Up-Shift Noise Margin value, to be used when
zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. If the upstream
noise margin is above this value and stays above it for more
than the time specified by the zxAnXdsl2LConfProfRaUsTimeUs, the
xTU-C shall attempt to increase the upstream net data rate.
The Upstream Up-shift Noise Margin ranges from 0 to 310 units
of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.4"
DEFVAL { 10 }
::= { zxAnXdsl2BaseConfProfEntry 22 }
zxAnXdsl2LConfProfRaUsTimeDs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Up-Shift Time Interval, to be used when
zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. The interval of
time that the downstream noise margin should stay above the
Downstream Up-shift Noise Margin before the xTU-R shall
attempt to increase the downstream net data rate. The time
interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.5"
DEFVAL { 3600 }
::= { zxAnXdsl2BaseConfProfEntry 23 }
zxAnXdsl2LConfProfRaUsTimeUs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Up-Shift Time Interval, to be used when
zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. The interval of
time the upstream noise margin should stay above the
Upstream Up-shift Noise Margin before the xTU-C shall
attempt to increase the upstream net data rate. The time
interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.6"
DEFVAL { 3600 }
::= { zxAnXdsl2BaseConfProfEntry 24 }
zxAnXdsl2LConfProfRaDsNrmsDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Down-Shift Noise Margin value, to be used
when
zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. If the downstream
noise margin is below this value and stays below that for more
than the time specified by the zxAnXdsl2LConfProfRaDsTimeDs, the
xTU-R shall attempt to decrease the downstream net data rate.
The Downstream Down-shift Noise Margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.7"
DEFVAL { 10 }
::= { zxAnXdsl2BaseConfProfEntry 25 }
zxAnXdsl2LConfProfRaDsNrmsUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Downshift Noise Margin value, to be used when
zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. If the upstream
noise margin is below this value and stays below that for more
than the time specified by the zxAnXdsl2LConfProfRaDsTimeUs, the
xTU-C shall attempt to decrease the upstream net data rate.
The Upstream Down-shift Noise Margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.8"
DEFVAL { 10 }
::= { zxAnXdsl2BaseConfProfEntry 26 }
zxAnXdsl2LConfProfRaDsTimeDs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Downshift Time Interval, to be used when
zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. The interval of
time the downstream noise margin should stay below the
Downstream Down-shift Noise Margin before the xTU-R shall
attempt to decrease the downstream net data rate. The time
interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.9"
DEFVAL { 3600 }
::= { zxAnXdsl2BaseConfProfEntry 27 }
zxAnXdsl2LConfProfRaDsTimeUs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Down-Shift Time Interval, to be used when
zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. The interval of
time the upstream noise margin should stay below the Upstream
Down-shift Noise Margin before the xTU-C shall attempt to
decrease the upstream net data rate. The time interval ranges
from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.10"
DEFVAL { 3600 }
::= { zxAnXdsl2BaseConfProfEntry 28 }
zxAnXdsl2LConfProfMsgMinUs OBJECT-TYPE
SYNTAX Unsigned32(4..63)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Overhead Rate Upstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU
in upstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.1"
DEFVAL { 4 }
::= { zxAnXdsl2BaseConfProfEntry 29 }
zxAnXdsl2LConfProfMsgMinDs OBJECT-TYPE
SYNTAX Unsigned32(4..63)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Overhead Rate Downstream. Defines the minimum rate
of
the message-based overhead that shall be maintained by the xTU
in downstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.2"
DEFVAL { 4 }
::= { zxAnXdsl2BaseConfProfEntry 30 }
zxAnXdsl2LConfProfPmMode OBJECT-TYPE
SYNTAX Xdsl2LinePmMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Power management state Enabling (PMMode). Defines the power
states the xTU-C or xTU-R may autonomously transition to on
this line.
The various bit positions are: allowTransitionsToIdle (0) and
allowTransitionsToLowPower (1). A bit with a '1' value
means
that the xTU is allowed to transit into the respective state
and a '0' value means that the xTU is not allowed
to transit into the respective state."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.4"
DEFVAL { { allowTransitionsToIdle, allowTransitionsToLowPower } }
::= { zxAnXdsl2BaseConfProfEntry 31 }
zxAnXdsl2LConfProfL0Time OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum time (in seconds) between an Exit from the L2
state and the next Entry into the L2 state (L0-TIME).
It ranges from 0 to 255 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.5"
DEFVAL { 255 }
::= { zxAnXdsl2BaseConfProfEntry 32 }
zxAnXdsl2LConfProfL2Time OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum time (in seconds) between an Entry into the
L2 state and the first Power Trim in the L2 state and between
two consecutive Power Trims in the L2 State (L2-TIME).
It ranges from 0 to 255 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.6"
DEFVAL { 255 }
::= { zxAnXdsl2BaseConfProfEntry 33 }
zxAnXdsl2LConfProfL2Atpr OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum aggregate transmit power reduction (in dB) that
can be performed at transition of L0 to L2 state or through a
single Power Trim in the L2 state (L2-ATPR).
It ranges from 0 dB to 31 dB."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.7"
DEFVAL { 10 }
::= { zxAnXdsl2BaseConfProfEntry 34 }
zxAnXdsl2LConfProfL2Atprt OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The total maximum aggregate transmit power reduction
(in dB) that can be performed in an L2 state. This is the
sum of all reductions of L2 Request (i.e., at transition of
L0 to L2 state) and Power Trims (L2-ATPRT)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.9"
DEFVAL { 31 }
::= { zxAnXdsl2BaseConfProfEntry 35 }
zxAnXdsl2LConfProfPsdMaskDs OBJECT-TYPE
SYNTAX Xdsl2PsdMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(PSDMASKds).
The downstream PSD mask applicable at the U-C2 reference
point.
This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.
This is a string of 32 pairs of values in the following
structure:
Octets 0+1 - Index of 1st sub-carrier used in the context
of a first breakpoint.
Octet 2 - The PSD reduction for the sub-carrier indicated in
octets 0 and 1.
Octets 3-5 - Same, for a 2nd breakpoint.
Octets 6-8 - Same, for a 3rd breakpoint.
This architecture continues until octets 94-95, which are
associated with a 32nd breakpoint.
Each subcarrier index is an unsigned number in the range 1 and
NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to
255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are
in the range 0 to 190 (0 to -95dBm/Hz).
When the number of breakpoints is less than 32, all remaining
octets are set to the value 0. Note that the content of this
object should be correlated with the sub-carriers mask and with
the RFI setup. "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.9"
::= { zxAnXdsl2BaseConfProfEntry 36 }
zxAnXdsl2LConfProfPsdMaskUs OBJECT-TYPE
SYNTAX Xdsl2PsdMaskUs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(PSDMASKus).
The upstream PSD mask applicable at the U-R2 reference
point.
This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.
This is a string of 16 pairs of values in the following
structure:
Octets 0+1 - Index of 1st sub-carrier used in the context
of a first breakpoint.
Octet 2 - The PSD reduction for the sub-carrier indicated in
octets 0 and 1.
Octets 3-5 - Same, for a 2nd breakpoint.
Octets 6-8 - Same, for a 3rd breakpoint.
This architecture continues until octets 9-47, which are
associated with a 16th breakpoint.
Each subcarrier index is an unsigned number in the range 1 and
NSCus. Each PSD reduction value is in the range 0 (0dBm/Hz) to
255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are
in the range 0 to 190 (0 to -95dBm/Hz).
When the number of breakpoints is less than 16, all remaining
octets are set to the value 0. Note that the content of this
object should be correlated with the sub-carriers mask and with
the RFI setup. "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.12"
::= { zxAnXdsl2BaseConfProfEntry 37 }
zxAnXdsl2LConfProfPsdMaskSelectUs OBJECT-TYPE
SYNTAX Unsigned32(1..9)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in
zxAnXdsl2LConfProfXtuTransSysEna. "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.11"
DEFVAL { 1 }
::= { zxAnXdsl2BaseConfProfEntry 38 }
zxAnXdsl2LConfProfTrellisDs OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabled or disabled the Trellis of downstream."
::= { zxAnXdsl2BaseConfProfEntry 39 }
zxAnXdsl2LConfProfTrellisUs OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabled or disabled the Trellis of upstream."
::= { zxAnXdsl2BaseConfProfEntry 40 }
zxAnXdsl2LConfProfBitswapDs OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabled or disabled the Bitswap of downstream."
::= { zxAnXdsl2BaseConfProfEntry 41 }
zxAnXdsl2LConfProfBitswapUs OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabled or disabled the Bitswap of upstream."
::= { zxAnXdsl2BaseConfProfEntry 42 }
zxAnXdsl2LConfProfRetrainMode OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabled or disabled the Retrain."
::= { zxAnXdsl2BaseConfProfEntry 43 }
zxAnXdsl2LconfProfSnrModeDs OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter enables/disables the transmitter referred virtual
noise in the downstream direction. If set to 2, the virtual noise
is disabled. If set to 1, the virtual noise is enabled."
::= { zxAnXdsl2BaseConfProfEntry 44 }
zxAnXdsl2LconfProfSnrModeUs OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter enables/disables the transmitter referred virtual
noise in the Upstream direction. If set to 2, the virtual noise
is disabled. If set to 1, the virtual noise is enabled."
::= { zxAnXdsl2BaseConfProfEntry 45 }
zxAnXdsl2LConfProfTxRefVNDs OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..96))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the downstream transmitter
referred virtual noise (TXREFVNds).
The TXREFVNds shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index t, with a
sub-carrier spacing of 4.3125 kHz, and a noise PSD level (expressed
in dBm/Hz) at that subcarrier. The set of breakpoints can then be
represented as [(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)].
The subcarrier index shall be coded as an unsigned integer.
The noise level shall be coded as an 8-bit unsigned integer representing
the noise level -40 dBm/Hz (coded as 0) to -140 dBm/Hz (coded as 200),
in steps of 0.5 dBm/Hz. Values from 201 to 255 are special values
indicating a noise level of 0 W/Hz. The maximum number of breakpoints
is 32."
::= { zxAnXdsl2BaseConfProfEntry 46 }
zxAnXdsl2LConfProfTxRefVNUs OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the upstream transmitter
referred virtual noise (TXREFVNus). The TXREFVNus shall be
specified through a set of breakpoints. Each breakpoint shall
consist of a subcarrier index t, with a sub-carrier spacing of
4.3125 kHz, and a noise PSD level (expressed in dBm/Hz) at that
subcarrier. The set of breakpoints can then be represented as
[(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)]. The subcarrier index
shall be coded as an unsigned integer. The noise level shall be
coded as an 8-bit unsigned integer representing the noise
level -40 dBm/Hz (coded as 0) to -140 dBm/Hz (coded as 200),
in steps of 0.5 dBm/Hz. Values from 201 to 255 are special values
indicating a noise level of 0 W/Hz. The maximum number of
breakpoints is 16."
::= { zxAnXdsl2BaseConfProfEntry 47 }
zxAnXdsl2Ch1ConfProfMinResDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e.,
Xdsl2LineConfRaModeDs) is set to DynamicRa."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { zxAnXdsl2BaseConfProfEntry 48 }
zxAnXdsl2Ch1ConfProfMinResDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e.,
Xdsl2LineConfRaModeUs) is set to DynamicRa."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { zxAnXdsl2BaseConfProfEntry 49 }
zxAnXdsl2Ch1ConfProfMinDataRateLowPwrDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G.992.3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { zxAnXdsl2BaseConfProfEntry 50 }
zxAnXdsl2Ch1ConfProfMaxBerDs OBJECT-TYPE
SYNTAX Xdsl2MaxBer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1),
eminus5 (2),
eminus7 (3)"
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4"
DEFVAL { eminus5 }
::= { zxAnXdsl2BaseConfProfEntry 51 }
zxAnXdsl2Ch1ConfProfMaxBerUs OBJECT-TYPE
SYNTAX Xdsl2MaxBer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1),
eminus5 (2),
eminus7 (3)"
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4"
DEFVAL { eminus5 }
::= { zxAnXdsl2BaseConfProfEntry 52 }
zxAnXdsl2Ch1ConfProfImaEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is of ATM
Data Path. When in 'enable' state, the ATM data path should
comply with the requirements for IMA transmission."
REFERENCE "ITU-T G.997.1, paragraph 7.3.4.1"
DEFVAL { false }
::= { zxAnXdsl2BaseConfProfEntry 53 }
zxAnXdsl2Ch2ConfProfMinResDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e.,
Xdsl2LineConfRaModeDs) is set to DynamicRa."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { zxAnXdsl2BaseConfProfEntry 54 }
zxAnXdsl2Ch2ConfProfMinResDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e.,
Xdsl2LineConfRaModeUs) is set to DynamicRa."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { zxAnXdsl2BaseConfProfEntry 55 }
zxAnXdsl2Ch2ConfProfMinDataRateLowPwrDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G.992.3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { zxAnXdsl2BaseConfProfEntry 56 }
zxAnXdsl2Ch2ConfProfMaxBerDs OBJECT-TYPE
SYNTAX Xdsl2MaxBer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1),
eminus5 (2),
eminus7 (3)"
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4"
DEFVAL { eminus5 }
::= { zxAnXdsl2BaseConfProfEntry 57 }
zxAnXdsl2Ch2ConfProfMaxBerUs OBJECT-TYPE
SYNTAX Xdsl2MaxBer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1),
eminus5 (2),
eminus7 (3)"
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4"
DEFVAL { eminus5 }
::= { zxAnXdsl2BaseConfProfEntry 58 }
zxAnXdsl2Ch2ConfProfImaEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is of ATM
Data Path. When in 'enable' state, the ATM data path should
comply with the requirements for IMA transmission."
REFERENCE "ITU-T G.997.1, paragraph 7.3.4.1"
DEFVAL { false }
::= { zxAnXdsl2BaseConfProfEntry 59 }
zxAnXdsl2LConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
ports."
::= { zxAnXdsl2BaseConfProfEntry 64 }
--------------------------------------------------------------------------
-- 3.zxAnXdsl2ServiceConfProfTable
--------------------------------------------------------------------------
zxAnXdsl2ServiceConfProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2ServiceConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2ServiceConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ Service configuration profile.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 2 }
zxAnXdsl2ServiceConfProfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2ServiceConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2ServiceConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2ServiceConfProfileName }
::= { zxAnXdsl2ServiceConfProfTable 1 }
ZxAnXdsl2ServiceConfProfEntry ::=
SEQUENCE {
zxAnXdsl2ServiceConfProfileName DisplayString,
zxAnXdsl2LConfProfForceInp TruthValue,
zxAnXdsl2LConfProfRaModeDs Xdsl2RaMode,
zxAnXdsl2LConfProfRaModeUs Xdsl2RaMode,
zxAnXdsl2LConfProfTargetSnrmDs Unsigned32,
zxAnXdsl2LConfProfTargetSnrmUs Unsigned32,
zxAnXdsl2LConfProfMaxSnrmDs Unsigned32,
zxAnXdsl2LConfProfMaxSnrmUs Unsigned32,
zxAnXdsl2LConfProfMinSnrmDs Unsigned32,
zxAnXdsl2LConfProfMinSnrmUs Unsigned32,
zxAnXdsl2ConfProfCh1Enabled TruthValue,
zxAnXdsl2Ch1ConfChanRaRatioDs Unsigned32,
zxAnXdsl2Ch1ConfChanRaRatioUs Unsigned32,
zxAnXdsl2Ch1ConfProfMaxDataRateDs Unsigned32,
zxAnXdsl2Ch1ConfProfMaxDataRateUs Unsigned32,
zxAnXdsl2Ch1ConfProfMinDataRateDs Unsigned32,
zxAnXdsl2Ch1ConfProfMinDataRateUs Unsigned32,
zxAnXdsl2Ch1ConfProfMaxDelayDs Unsigned32,
zxAnXdsl2Ch1ConfProfMaxDelayUs Unsigned32,
zxAnXdsl2Ch1ConfProfMinProtectionDs Xdsl2SymbolProtection,
zxAnXdsl2Ch1ConfProfMinProtectionUs Xdsl2SymbolProtection,
zxAnXdsl2ConfProfCh2Enabled TruthValue,
zxAnXdsl2Ch2ConfChanRaRatioDs Unsigned32,
zxAnXdsl2Ch2ConfChanRaRatioUs Unsigned32,
zxAnXdsl2Ch2ConfProfMaxDataRateDs Unsigned32,
zxAnXdsl2Ch2ConfProfMaxDataRateUs Unsigned32,
zxAnXdsl2Ch2ConfProfMinDataRateDs Unsigned32,
zxAnXdsl2Ch2ConfProfMinDataRateUs Unsigned32,
zxAnXdsl2Ch2ConfProfMaxDelayDs Unsigned32,
zxAnXdsl2Ch2ConfProfMaxDelayUs Unsigned32,
zxAnXdsl2Ch2ConfProfMinProtectionDs Xdsl2SymbolProtection,
zxAnXdsl2Ch2ConfProfMinProtectionUs Xdsl2SymbolProtection,
zxAnXdsl2ServiceConfProfRowStatus RowStatus
}
zxAnXdsl2ServiceConfProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2ServiceConfProfEntry 1 }
zxAnXdsl2LConfProfForceInp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable /disable force to use INP."
::= { zxAnXdsl2ServiceConfProfEntry 2 }
zxAnXdsl2LConfProfRaModeDs OBJECT-TYPE
SYNTAX Xdsl2RaMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mode of operation of a rate-adaptive xTU-C in the transmit
direction. The parameter can take three values:
fixed (1),
raInit (2),
dynamicRa (3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.1"
DEFVAL { raInit }
::= { zxAnXdsl2ServiceConfProfEntry 3 }
zxAnXdsl2LConfProfRaModeUs OBJECT-TYPE
SYNTAX Xdsl2RaMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mode of operation of a rate-adaptive xTU-R in the transmit
direction. The parameter can take three values:
fixed (1),
raInit (2),
dynamicRa (3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.2"
DEFVAL { raInit }
::= { zxAnXdsl2ServiceConfProfEntry 4 }
zxAnXdsl2LConfProfTargetSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-R receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB
(Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.1"
DEFVAL { 60 }
::= { zxAnXdsl2ServiceConfProfEntry 5 }
zxAnXdsl2LConfProfTargetSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the upstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB
(Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.2"
DEFVAL { 60 }
::= { zxAnXdsl2ServiceConfProfEntry 6 }
zxAnXdsl2LConfProfMaxSnrmDs OBJECT-TYPE
SYNTAX Unsigned32 (0..310 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum Noise Margin the xTU-R receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-R
shall request that the xTU-C reduce the xTU-C transmit power
to get a noise margin below this limit (if this functionality
is supported). The maximum noise margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB). A value of
0x7FFFFFFF (2147483647) means that there is no maximum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.3"
DEFVAL { 310 }
::= { zxAnXdsl2ServiceConfProfEntry 7 }
zxAnXdsl2LConfProfMaxSnrmUs OBJECT-TYPE
SYNTAX Unsigned32 (0..310 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum Noise Margin the xTU-C receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-C
shall request that the xTU-R reduce the xTU-R transmit power
to get a noise margin below this limit (if this functionality
is supported). The maximum noise margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB). A value of
0x7FFFFFFF (2147483647) means that there is no maximum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.4"
DEFVAL { 310 }
::= { zxAnXdsl2ServiceConfProfEntry 8 }
zxAnXdsl2LConfProfMinSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall
request that the xTU-C increase the xTU-C transmit power.
If an increase to xTU-C transmit power is not possible, a
loss-of-margin (LOM) defect occurs, the xTU-R shall fail and
attempt to reinitialize and the NMS shall be notified. The
minimum noise margin ranges from 0 to 310 units of
0.1 dB (Physical values are 0 to 31 dB). A value of 0 means
that there is no minimum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.5"
DEFVAL { 10 }
::= { zxAnXdsl2ServiceConfProfEntry 9 }
zxAnXdsl2LConfProfMinSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall
request that the xTU-R increase the xTU-R transmit power.
If an increase of xTU-R transmit power is not possible, a
loss-of-margin (LOM) defect occurs, the xTU-C shall fail and
attempt to re-initialize and the NMS shall be notified. The
minimum noise margin ranges from 0 to 310 units of
0.1 dB (Physical values are 0 to 31 dB). A value of 0 means
that there is no minimum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.6"
DEFVAL { 10 }
::= { zxAnXdsl2ServiceConfProfEntry 10 }
zxAnXdsl2ConfProfCh1Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable /disable the bearer channel 1."
::= { zxAnXdsl2ServiceConfProfEntry 11 }
zxAnXdsl2Ch1ConfChanRaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percents"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels. Also, the 100 -
Xdsl2ConfTemplateChan1RaRatioDs is the ratio of excess data
rate to be assigned to all other bearer channels on Downstream
direction. The sum of rate adaptation ratios over all bearers
on the same direction shall be equal to 100%."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
DEFVAL { 100 }
::= { zxAnXdsl2ServiceConfProfEntry 12 }
zxAnXdsl2Ch1ConfChanRaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percents"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels. Also, the
100 - Xdsl2ConfTemplateChan1RaRatioUs is the ratio of excess
data rate to be assigned to all other bearer channels on
Upstream direction. The sum of rate adaptation ratios over
all bearers on the same direction shall be equal to 100 %."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
DEFVAL { 100 }
::= { zxAnXdsl2ServiceConfProfEntry 13 }
zxAnXdsl2Ch1ConfProfMaxDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
::= { zxAnXdsl2ServiceConfProfEntry 14 }
zxAnXdsl2Ch1ConfProfMaxDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Data Rate on Upstream direction. The maximum net
data
rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
::= { zxAnXdsl2ServiceConfProfEntry 15 }
zxAnXdsl2Ch1ConfProfMinDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
::= { zxAnXdsl2ServiceConfProfEntry 16 }
zxAnXdsl2Ch1ConfProfMinDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate on Upstream direction. The minimum net
data
rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
::= { zxAnXdsl2ServiceConfProfEntry 17 }
zxAnXdsl2Ch1ConfProfMaxDelayDs OBJECT-TYPE
SYNTAX Unsigned32(0..63)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Interleave Delay on Downstream direction. The
maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor)
and D (depth) values such that the actual one-way interleaving
delay (zxAnXdsl2Ch1StatusActDelay) is as close as possible to,
but less than or equal to zxAnXdsl2Ch1ConfProfMaxDelayDs. The
delay is coded in ms, with the value 0 indicating no delay
bound is being imposed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.2"
::= { zxAnXdsl2ServiceConfProfEntry 18 }
zxAnXdsl2Ch1ConfProfMaxDelayUs OBJECT-TYPE
SYNTAX Unsigned32(0..63)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The xTUs shall choose the S (factor) and
D (depth) values such that the actual one-way interleaving
delay (zxAnXdsl2Ch1StatusActDelay) is as close as possible to,
but less than or equal to zxAnXdsl2Ch1ConfProfMaxDelayUs. The
delay is coded in ms, with the value 0 indicating no delay
bound is being imposed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.2"
::= { zxAnXdsl2ServiceConfProfEntry 19 }
zxAnXdsl2Ch1ConfProfMinProtectionDs OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Impulse Noise Protection on Downstream direction.
The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not required), halfSymbol
(i.e., INP length is 1/2 symbol) and 1-16 symbols in steps
of 1 symbol."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.3"
DEFVAL { noProtection }
::= { zxAnXdsl2ServiceConfProfEntry 20 }
zxAnXdsl2Ch1ConfProfMinProtectionUs OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. "
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.3"
DEFVAL { noProtection }
::= { zxAnXdsl2ServiceConfProfEntry 21 }
zxAnXdsl2ConfProfCh2Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable /disable the bearer channel 1."
::= { zxAnXdsl2ServiceConfProfEntry 22 }
zxAnXdsl2Ch2ConfChanRaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percents"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels. Also, the 100 -
Xdsl2ConfTemplateChan1RaRatioDs is the ratio of excess data
rate to be assigned to all other bearer channels on Downstream
direction. The sum of rate adaptation ratios over all bearers
on the same direction shall be equal to 100%."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
DEFVAL { 100 }
::= { zxAnXdsl2ServiceConfProfEntry 23 }
zxAnXdsl2Ch2ConfChanRaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percents"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels. Also, the
100 - Xdsl2ConfTemplateChan1RaRatioUs is the ratio of excess
data rate to be assigned to all other bearer channels on
Upstream direction. The sum of rate adaptation ratios over
all bearers on the same direction shall be equal to 100 %."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
DEFVAL { 100 }
::= { zxAnXdsl2ServiceConfProfEntry 24 }
zxAnXdsl2Ch2ConfProfMaxDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
::= { zxAnXdsl2ServiceConfProfEntry 25 }
zxAnXdsl2Ch2ConfProfMaxDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Data Rate on Upstream direction. The maximum net
data
rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
::= { zxAnXdsl2ServiceConfProfEntry 26 }
zxAnXdsl2Ch2ConfProfMinDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
::= { zxAnXdsl2ServiceConfProfEntry 27 }
zxAnXdsl2Ch2ConfProfMinDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate on Upstream direction. The minimum net
data
rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
::= { zxAnXdsl2ServiceConfProfEntry 28 }
zxAnXdsl2Ch2ConfProfMaxDelayDs OBJECT-TYPE
SYNTAX Unsigned32(0..63)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Interleave Delay on Downstream direction. The
maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor)
and D (depth) values such that the actual one-way interleaving
delay (zxAnXdsl2Ch2StatusActDelay) is as close as possible to,
but less than or equal to zxAnXdsl2Ch2ConfProfMaxDelayDs. The
delay is coded in ms, with the value 0 indicating no delay
bound is being imposed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.2"
::= { zxAnXdsl2ServiceConfProfEntry 29 }
zxAnXdsl2Ch2ConfProfMaxDelayUs OBJECT-TYPE
SYNTAX Unsigned32(0..63)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The xTUs shall choose the S (factor) and
D (depth) values such that the actual one-way interleaving
delay (zxAnXdsl2Ch2StatusActDelay) is as close as possible to,
but less than or equal to zxAnXdsl2Ch2ConfProfMaxDelayUs. The
delay is coded in ms, with the value 0 indicating no delay
bound is being imposed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.2"
::= { zxAnXdsl2ServiceConfProfEntry 30 }
zxAnXdsl2Ch2ConfProfMinProtectionDs OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Impulse Noise Protection on Downstream direction.
The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not required), halfSymbol
(i.e., INP length is 1/2 symbol) and 1-16 symbols in steps
of 1 symbol."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.3"
DEFVAL { noProtection }
::= { zxAnXdsl2ServiceConfProfEntry 31 }
zxAnXdsl2Ch2ConfProfMinProtectionUs OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. "
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.3"
DEFVAL { noProtection }
::= { zxAnXdsl2ServiceConfProfEntry 32 }
zxAnXdsl2ServiceConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
ports."
::= { zxAnXdsl2ServiceConfProfEntry 40 }
--------------------------------------------------------------------------
-- 4.zxAnXdsl2DpboConfProfTable
--------------------------------------------------------------------------
zxAnXdsl2DpboConfProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2DpboConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2DpboConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ Dpbo configuration profile.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 3 }
zxAnXdsl2DpboConfProfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2DpboConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2DpboConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2DpboConfProfileName }
::= { zxAnXdsl2DpboConfProfTable 1 }
ZxAnXdsl2DpboConfProfEntry ::=
SEQUENCE {
zxAnXdsl2DpboConfProfileName DisplayString,
zxAnXdsl2LConfProfDpboEPsd Xdsl2PsdMaskDs,
zxAnXdsl2LConfProfDpboEsEL Unsigned32,
zxAnXdsl2LConfProfDpboEsCableModelA Unsigned32,
zxAnXdsl2LConfProfDpboEsCableModelB Unsigned32,
zxAnXdsl2LConfProfDpboEsCableModelC Unsigned32,
zxAnXdsl2LConfProfDpboMus Unsigned32,
zxAnXdsl2LConfProfDpboFMin Unsigned32,
zxAnXdsl2LConfProfDpboFMax Unsigned32,
zxAnXdsl2DpboConfProfRowStatus RowStatus
}
zxAnXdsl2DpboConfProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2DpboConfProfEntry 1 }
zxAnXdsl2LConfProfDpboEPsd OBJECT-TYPE
SYNTAX Xdsl2PsdMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOEPSD).
This configuration parameter defines the PSD mask that
is assumed to be permitted at the exchange. This parameter
shall use the same format as zxAnXdsl2LConfProfPsdMaskDs (PSDMASKds).
The maximum number of breakpoints for zxAnXdsl2LConfProfDpboEPsd is
16."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
::= { zxAnXdsl2DpboConfProfEntry 2 }
zxAnXdsl2LConfProfDpboEsEL OBJECT-TYPE
SYNTAX Unsigned32 (0..511)
UNITS "0.5 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOESEL).
This configuration parameter defines the assumed
electrical length of cables (E-side cables) connecting
exchange based DSL services to a remote flexibility point
(cabinet), that hosts the xTU-C that is subject to
spectrally shaped downstream power back-off (DPBO)
depending on this length. The electrical length is
defined as the loss (in dB) of an equivalent length of
hypothetical cable at a reference frequency defined by
the network operator or in spectrum management regulations.
This parameter shall be coded as an unsigned integer
representing an electrical length from 0 dB (coded as 0)
to 255.5 dB (coded as 511) in steps of 0.5 dB. All values
in the range are valid. If this parameter is set to zero,
the DPBO shall be disabled."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 0 }
::= { zxAnXdsl2DpboConfProfEntry 3 }
zxAnXdsl2LConfProfDpboEsCableModelA OBJECT-TYPE
SYNTAX Unsigned32 (0..640)
UNITS "2^-8"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOESCMA).
The E-side Cable Model parameter A (DPBOESCMA) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject to spectrally shaped downstream
power back-off (DPBO) depending on this value.
The cable model is in terms of three
scalars zxAnXdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
zxAnXdsl2LConfProfDpboEsCableModelB(DPBOESCMB),
and zxAnXdsl2LConfProfDpboEsCableModelC (DPBOESCMC),
that are used to estimate the frequency dependent loss of E-side
cables calculated from the zxAnXdsl2LConfProfDpboEsEL (DPBOESEL)
parameter. Possible values shall be coded as unsigned integers
representing a scalar value from -1 (coded as 0) to
1.5 (coded as 640) in steps of 2^-8. All values in the range are
valid. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 0 }
::= { zxAnXdsl2DpboConfProfEntry 4 }
zxAnXdsl2LConfProfDpboEsCableModelB OBJECT-TYPE
SYNTAX Unsigned32 (0..640)
UNITS "2^-8"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOESCMB).
The E-side Cable Model parameter B (DPBOESCMB) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject to spectrally shaped downstream
power back-off (DPBO) depending on this value.
The cable model is in terms of three
scalars zxAnXdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
zxAnXdsl2LConfProfDpboEsCableModelB(DPBOESCMB),
and zxAnXdsl2LConfProfDpboEsCableModelC (DPBOESCMC),
that are used to estimate the frequency dependent loss of E-side
cables calculated from the zxAnXdsl2LConfProfDpboEsEL (DPBOESEL)
parameter. Possible values shall be coded as unsigned integers
representing a scalar value from -1 (coded as 0) to
1.5 (coded as 640) in steps of 2^-8. All values in the range are
valid. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 0 }
::= { zxAnXdsl2DpboConfProfEntry 5 }
zxAnXdsl2LConfProfDpboEsCableModelC OBJECT-TYPE
SYNTAX Unsigned32 (0..640)
UNITS "2^-8"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOESCMC).
The E-side Cable Model parameter C (DPBOESCMC) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject to spectrally shaped downstream
power back-off (DPBO) depending on this value.
The cable model is in terms of three
scalars zxAnXdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
zxAnXdsl2LConfProfDpboEsCableModelB(DPBOESCMB),
and zxAnXdsl2LConfProfDpboEsCableModelC (DPBOESCMC),
that are used to estimate the frequency dependent loss of E-side
cables calculated from the zxAnXdsl2LConfProfDpboEsEL (DPBOESEL)
parameter. Possible values shall be coded as unsigned integers
representing a scalar value from -1 (coded as 0) to
1.5 (coded as 640) in steps of 2^-8. All values in the range are
valid. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 0 }
::= { zxAnXdsl2DpboConfProfEntry 6 }
zxAnXdsl2LConfProfDpboMus OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.5 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOMUS).
This configuration parameter defines the assumed Minimum Usable
receive PSD mask (in dBm/Hz) for exchange based services,
used to modify parameter zxAnXdsl2LConfProfDpboFMax (DPBOFMAX) defined
below [to determine the DPBO]. It shall be coded as an unsigned
integer representing a PSD mask level from 0 dBm/Hz (coded as 0)
to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dB. All values
in the range are valid.
NOTE - The PSD mask level is 3.5 dB above the signal PSD
level. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 0 }
::= { zxAnXdsl2DpboConfProfEntry 7 }
zxAnXdsl2LConfProfDpboFMin OBJECT-TYPE
SYNTAX Unsigned32 (0..2048)
UNITS "4.3125 kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOFMIN).
This configuration parameter defines the minimum frequency
from which the DPBO shall be applied. It ranges from
0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps
of 4.3125 kHz. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 32 }
::= { zxAnXdsl2DpboConfProfEntry 8 }
zxAnXdsl2LConfProfDpboFMax OBJECT-TYPE
SYNTAX Unsigned32 (32..6956)
UNITS "4.3125 kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOFMAX).
This configuration parameter defines the maximum frequency at
which DPBO may be applied. It ranges from 138 kHz (coded as 32)
to 29997.75 kHz (coded as 6956) in steps of 4.3125 kHz.
This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 512 }
::= { zxAnXdsl2DpboConfProfEntry 9 }
zxAnXdsl2DpboConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of Dpbo
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
ports."
::= { zxAnXdsl2DpboConfProfEntry 20 }
--------------------------------------------------------------------------
-- 5.zxAnXdsl2UpboConfProfTable
--------------------------------------------------------------------------
zxAnXdsl2UpboConfProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2UpboConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2UpboConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ Upbo configuration profile.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 4 }
zxAnXdsl2UpboConfProfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2UpboConfProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2UpboConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2LUpboConfProfileName }
::= { zxAnXdsl2UpboConfProfTable 1 }
ZxAnXdsl2UpboConfProfEntry ::=
SEQUENCE {
zxAnXdsl2LUpboConfProfileName DisplayString,
zxAnXdsl2LConfProfUpboKL Unsigned32,
zxAnXdsl2LConfProfUpboKLF Xdsl2UpboKLF,
zxAnXdsl2LConfProfUpboU0bandPsdA Unsigned32,
zxAnXdsl2LConfProfUpboU0bandPsdB Unsigned32,
zxAnXdsl2LConfProfUpboU1bandPsdA Unsigned32,
zxAnXdsl2LConfProfUpboU1bandPsdB Unsigned32,
zxAnXdsl2LConfProfUpboU2bandPsdA Unsigned32,
zxAnXdsl2LConfProfUpboU2bandPsdB Unsigned32,
zxAnXdsl2LConfProfUpboU3bandPsdA Unsigned32,
zxAnXdsl2LConfProfUpboU3bandPsdB Unsigned32,
zxAnXdsl2LConfProfUpboU4bandPsdA Unsigned32,
zxAnXdsl2LConfProfUpboU4bandPsdB Unsigned32,
zxAnXdsl2LUpboConfProfRowStatus RowStatus
}
zxAnXdsl2LUpboConfProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2UpboConfProfEntry 1 }
zxAnXdsl2LConfProfUpboKL OBJECT-TYPE
SYNTAX Unsigned32 (0..1280)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOKL).
This configuration parameter defines the electrical length
expressed in dB at 1MHz, kl0, configured by the CO-MIB.
The value ranges from 0 (coded as 0) to 128 dB (coded as 1280)
in steps of 0.1 dB. This parameter is relevant only if
zxAnXdsl2LConfProfUpboKLF is set to override(2), which indicates
that this parameter's value will override the VTUs'
determination of the electrical length. If zxAnXdsl2LConfProfUpboKLF
is set either to auto(1) or disableUpbo(3), then this parameter
will be ignored."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfProfEntry 2 }
zxAnXdsl2LConfProfUpboKLF OBJECT-TYPE
SYNTAX Xdsl2UpboKLF
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the upstream power backoff force mode (UPBOKLF).
The three possible mode values are:
auto(1),
override(2), &
disableUpbo(3)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { disableUpbo }
::= { zxAnXdsl2UpboConfProfEntry 3 }
zxAnXdsl2LConfProfUpboU0bandPsdA OBJECT-TYPE
SYNTAX Unsigned32(4000..8095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 4000 }
::= { zxAnXdsl2UpboConfProfEntry 4 }
zxAnXdsl2LConfProfUpboU0bandPsdB OBJECT-TYPE
SYNTAX Unsigned32(0..4095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfProfEntry 5 }
zxAnXdsl2LConfProfUpboU1bandPsdA OBJECT-TYPE
SYNTAX Unsigned32(4000..8095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 4000 }
::= { zxAnXdsl2UpboConfProfEntry 6 }
zxAnXdsl2LConfProfUpboU1bandPsdB OBJECT-TYPE
SYNTAX Unsigned32(0..4095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfProfEntry 7 }
zxAnXdsl2LConfProfUpboU2bandPsdA OBJECT-TYPE
SYNTAX Unsigned32(4000..8095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 4000 }
::= { zxAnXdsl2UpboConfProfEntry 8 }
zxAnXdsl2LConfProfUpboU2bandPsdB OBJECT-TYPE
SYNTAX Unsigned32(0..4095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfProfEntry 9 }
zxAnXdsl2LConfProfUpboU3bandPsdA OBJECT-TYPE
SYNTAX Unsigned32(4000..8095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 4000 }
::= { zxAnXdsl2UpboConfProfEntry 10 }
zxAnXdsl2LConfProfUpboU3bandPsdB OBJECT-TYPE
SYNTAX Unsigned32(0..4095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfProfEntry 11 }
zxAnXdsl2LConfProfUpboU4bandPsdA OBJECT-TYPE
SYNTAX Unsigned32(4000..8095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 4000 }
::= { zxAnXdsl2UpboConfProfEntry 12 }
zxAnXdsl2LConfProfUpboU4bandPsdB OBJECT-TYPE
SYNTAX Unsigned32(0..4095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfProfEntry 13 }
zxAnXdsl2LUpboConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of Upbo
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
ports."
::= { zxAnXdsl2UpboConfProfEntry 20 }
--------------------------------------------------------------------------
-- 6.zxAnXdsl2AlmThreshPrfTable
--------------------------------------------------------------------------
zxAnXdsl2AlmThreshPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2AlmThreshPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2AlmThreshPrfTable contains DSL
line PM thresholds profiles.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2AlarmProfile 1 }
zxAnXdsl2AlmThreshPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2AlmThreshPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2AlmThreshPrfTable contains DSL
line PM thresholds profiles.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this
document"
INDEX { zxAnXdsl2AlmThreshPrfName }
::= { zxAnXdsl2AlmThreshPrfTable 1 }
ZxAnXdsl2AlmThreshPrfEntry ::=
SEQUENCE {
zxAnXdsl2AlmThreshPrfName SnmpAdminString,
zxAnXdsl2XtucThreshFecs HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshEs HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshSes HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshLoss HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshLofs HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshLols HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshLprs HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshUas HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshPtmCrcErrs Unsigned32,
zxAnXdsl2XtucThreshPtmCodViol Unsigned32,
zxAnXdsl2XturThreshFecs HCPerfIntervalThreshold,
zxAnXdsl2XturThreshEs HCPerfIntervalThreshold,
zxAnXdsl2XturThreshSes HCPerfIntervalThreshold,
zxAnXdsl2XturThreshLoss HCPerfIntervalThreshold,
zxAnXdsl2XturThreshLofs HCPerfIntervalThreshold,
-- zxAnXdsl2XturThreshLols HCPerfIntervalThreshold,
zxAnXdsl2XturThreshLprs HCPerfIntervalThreshold,
zxAnXdsl2XturThreshUas HCPerfIntervalThreshold,
zxAnXdsl2XturThreshPtmCrcErrs Unsigned32,
zxAnXdsl2XturThreshPtmCodViol Unsigned32,
zxAnXdsl2ThreshFailedFullInt Unsigned32,
zxAnXdsl2ThreshFailedShrtInt Unsigned32,
zxAnXdsl2Ch1XtucThrshCodeViol Unsigned32,
zxAnXdsl2Ch1XtucThrshCorrected Unsigned32,
zxAnXdsl2Ch1XturThrshCodeViol Unsigned32,
zxAnXdsl2Ch1XturThrshCorrected Unsigned32,
zxAnXdsl2Ch2XtucThrshCodeViol Unsigned32,
zxAnXdsl2Ch2XtucThrshCorrected Unsigned32,
zxAnXdsl2Ch2XturThrshCodeViol Unsigned32,
zxAnXdsl2Ch2XturThrshCorrected Unsigned32,
zxAnXdsl2AlmThreshPrfRowStatus RowStatus,
zxAnXdsl2XtucLowDataRateTolerance INTEGER,
zxAnXdsl2XturLowDataRateTolerance INTEGER,
zxAnXdsl2XtucLowDataRateThresh Integer32,
zxAnXdsl2XturLowDataRateThresh Integer32,
zxAnXdsl2XtucInitFailTrapEnable BITS,
zxAnXdsl2XturInitFailTrapEnable BITS
}
zxAnXdsl2AlmThreshPrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2AlmThreshPrfEntry 1 }
zxAnXdsl2XtucThreshFecs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MFecs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 2 }
zxAnXdsl2XtucThreshEs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MEs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 3 }
zxAnXdsl2XtucThreshSes OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MSes counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 4 }
zxAnXdsl2XtucThreshLoss OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 5 }
zxAnXdsl2XtucThreshLofs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 6}
zxAnXdsl2XtucThreshLols OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 7}
zxAnXdsl2XtucThreshLprs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 8}
zxAnXdsl2XtucThreshUas OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MUas counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 9 }
zxAnXdsl2XtucThreshPtmCrcErrs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 10}
zxAnXdsl2XtucThreshPtmCodViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 11}
zxAnXdsl2XturThreshFecs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MFecs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 12 }
zxAnXdsl2XturThreshEs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MEs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 13 }
zxAnXdsl2XturThreshSes OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MSes counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 14 }
zxAnXdsl2XturThreshLoss OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 15 }
zxAnXdsl2XturThreshLofs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 16}
-- zxAnXdsl2XturThreshLols OBJECT-TYPE
-- SYNTAX HCPerfIntervalThreshold
-- UNITS "seconds"
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "A threshold for the xdsl2PMLCurr15MLoss counter,
-- when xdsl2PMLCurrUnit is xtur {2}.
-- The value 0 means that no threshold is specified for the
-- associated counter."
-- DEFVAL { 0 }
-- ::= { zxAnXdsl2AlmThreshPrfEntry 17}
zxAnXdsl2XturThreshLprs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 18}
zxAnXdsl2XturThreshUas OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MUas counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 19 }
zxAnXdsl2XturThreshPtmCrcErrs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 20}
zxAnXdsl2XturThreshPtmCodViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 21}
zxAnXdsl2ThreshFailedFullInt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurrInit15MfailedFullInits
counter.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 22 }
zxAnXdsl2ThreshFailedShrtInt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurrInit15MFailedShortInits
counter.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 23 }
zxAnXdsl2Ch1XtucThrshCodeViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 24 }
zxAnXdsl2Ch1XtucThrshCorrected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 25 }
zxAnXdsl2Ch1XturThrshCodeViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 26 }
zxAnXdsl2Ch1XturThrshCorrected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 27 }
zxAnXdsl2Ch2XtucThrshCodeViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 28 }
zxAnXdsl2Ch2XtucThrshCorrected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 29 }
zxAnXdsl2Ch2XturThrshCodeViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 30 }
zxAnXdsl2Ch2XturThrshCorrected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 31 }
zxAnXdsl2AlmThreshPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
templates."
::= { zxAnXdsl2AlmThreshPrfEntry 32 }
zxAnXdsl2XtucLowDataRateTolerance OBJECT-TYPE
SYNTAX INTEGER(0..100)
UNITS "%"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Tolerance between zxAnXdsl2ChConfMaxDataRateDs and
xdsl2ChStatusActDataRate(xtuc).
Calculation:
100*(zxAnXdsl2ChConfMaxDataRateDs - xdsl2ChStatusActDataRate(xtuc))
Difference =-------------------------------------------------------------------
zxAnXdsl2ChConfMaxDataRateDs
If Difference is larger than zxAnXdsl2XtucLowDataRateTolerance,
zxAnXdsl2LineXtucLowDataRateTrap will be sent.
A value of `0' will disable the trap. "
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 33 }
zxAnXdsl2XturLowDataRateTolerance OBJECT-TYPE
SYNTAX INTEGER(0..100)
UNITS "%"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Tolerance between zxAnXdsl2ChConfMaxDataRateUs and
xdsl2ChStatusActDataRate(xtur).
Calculation:
100*(zxAnXdsl2ChConfMaxDataRateUs - xdsl2ChStatusActDataRate(xtur))
Difference =-------------------------------------------------------------------
zxAnXdsl2ChConfMaxDataRateUs
If Difference is larger than zxAnXdsl2XturLowDataRateTolerance,
zxAnXdsl2LineXturLowDataRateTrap will be sent.
A value of `0' will disable the trap. "
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 34 }
zxAnXdsl2XtucLowDataRateThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Threshold of xtuc data rate.
If xdsl2ChStatusActDataRate(xtuc) is lower than zxAnXdsl2XtucLowDataRateThresh,
zxAnXdsl2LineXtucLowDataRateTrap will be sent.
A value of `0' will disable the trap. "
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 35 }
zxAnXdsl2XturLowDataRateThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Threshold of xtur data rate.
If xdsl2ChStatusActDataRate(xtur) is lower than zxAnXdsl2XturLowDataRateThresh,
zxAnXdsl2LineXturLowDataRateTrap will be sent.
A value of `0' will disable the trap. "
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 36 }
zxAnXdsl2XtucInitFailTrapEnable OBJECT-TYPE
SYNTAX BITS {
unused1 (0),
lossOfFraming (1),
lossOfSignal (2),
lossOfPower (3),
initFailure (4),
lossOfSignalQuality (5),
lossOfLink (6),
lossOfSignalAlm (7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables and disables the InitFailureTrap on the xTU-C interface.
unused1 (0) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-C
interface.
lossOfFraming (1) - Value 0 means disable the loss of frame
synchronization trap on the xTU-C
interface.
lossOfSignal (2) - Value 0 means disable the loss of signal
trap on the xTU-C interface.
lossOfPower (3) - Value 0 means disable the loss of power
trap on the xTU-C interface.
initFailure (4) - Value 0 means disable the initialization
failure trap on the xTU-C interface.
lossOfSignalQuality (5) - Value 0 means disable the loss of signal
quality trap on the xTU-C interface.
lossOfLink (6) - Value 0 means disable the loss of link
quality trap on the xTU-C interface.
lossOfSignalAlm (7) - Value 0 means disable the loss of signal
alarm on the xTU-C interface.
"
::= { zxAnXdsl2AlmThreshPrfEntry 37 }
zxAnXdsl2XturInitFailTrapEnable OBJECT-TYPE
SYNTAX BITS{
unused1 (0),
lossOfFraming (1),
lossOfSignal (2),
lossOfPower (3),
unused2 (4),
lossOfSignalQuality (5),
unused3 (6),
lossOfSignalAlm (7),
lossOfPowerAlm (8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables and disables the InitFailureTrap on the xTU-R interface.
unused1 (0) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-R
interface.
lossOfFraming (1) - Value 0 means disable the loss of frame
synchronization trap on the xTU-R
interface.
lossOfSignal (2) - Value 0 means disable the loss of signal
trap on the xTU-R interface.
lossOfPower (3) - Value 0 means disable the loss of power
trap on the xTU-R interface.
unused2 (4) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-R
interface.
lossOfSignalQuality (5) - Value 0 means disable the loss of signal
quality trap on the xTU-R interface.
unused3 (6) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-R
interface.
lossOfSignalAlm (7) - Value 0 means disable the loss of signal
alarm on the xTU-R interface.
lossOfPowerAlm (8) - Value 0 means disable the loss of power
alarm on the xTU-R interface."
::= { zxAnXdsl2AlmThreshPrfEntry 38 }
--------------------------------------------------------------------------
-- 7.zxAnXdsl2PMLineCurrTable
--------------------------------------------------------------------------
zxAnXdsl2PMLineCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2PMLineCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMLineCurrTable contains current Performance
Monitoring results of DSL line. "
::= { zxAnXdsl2PMLine 1 }
zxAnXdsl2PMLineCurrEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2PMLineCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMLineCurrTable contains current Performance
Monitoring results of DSL line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the termination
unit."
AUGMENTS { xdsl2PMLineCurrEntry }
::= { zxAnXdsl2PMLineCurrTable 1 }
ZxAnXdsl2PMLineCurrEntry ::=
SEQUENCE {
zxAnXdsl2PMLCurr15MLofs Counter32,
zxAnXdsl2PMLCurr15MLols Counter32,
zxAnXdsl2PMLCurr15MLprs Counter32,
zxAnXdsl2PMLCurr15MPtmCrcErrs Counter32,
zxAnXdsl2PMLCurr15MPtmCodViol Counter32,
zxAnXdsl2PMLCurr1DayLofs Counter32,
zxAnXdsl2PMLCurr1DayLols Counter32,
zxAnXdsl2PMLCurr1DayLprs Counter32,
zxAnXdsl2PMLCurr1DayPtmCrcErrs Counter32,
zxAnXdsl2PMLCurr1DayPtmCodViol Counter32
}
zxAnXdsl2PMLCurr15MLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF ."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 1 }
zxAnXdsl2PMLCurr15MLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOL."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 2 }
zxAnXdsl2PMLCurr15MLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 3 }
zxAnXdsl2PMLCurr15MPtmCrcErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm Crc Errors during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineCurrEntry 4 }
zxAnXdsl2PMLCurr15MPtmCodViol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm coding violations during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineCurrEntry 5 }
zxAnXdsl2PMLCurr1DayLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 6 }
zxAnXdsl2PMLCurr1DayLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOL."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 7 }
zxAnXdsl2PMLCurr1DayLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 8 }
zxAnXdsl2PMLCurr1DayPtmCrcErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm Crc Errors during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineCurrEntry 9 }
zxAnXdsl2PMLCurr1DayPtmCodViol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm coding violations during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineCurrEntry 10 }
--------------------------------------------------------------------------
-- 7.1 zxAnXdsl2PMLineHist15MinTable
--------------------------------------------------------------------------
zxAnXdsl2PMLineHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMLineHist15MinTable contains history Performance
Monitoring results for 15min of DSL line. "
::= { zxAnXdsl2PMLine 2 }
zxAnXdsl2PMLineHist15MinEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMLineHist15MinTable contains history Performance
Monitoring results for 15min of DSL line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the termination
unit."
AUGMENTS { xdsl2PMLineHist15MinEntry }
::= { zxAnXdsl2PMLineHist15MinTable 1 }
ZxAnXdsl2PMLineHist15MinEntry ::=
SEQUENCE {
zxAnXdsl2PMLHist15MMonitoredTime Unsigned32,
zxAnXdsl2PMLHist15MLofs Counter32,
zxAnXdsl2PMLHist15MLols Counter32,
zxAnXdsl2PMLHist15MLprs Counter32,
zxAnXdsl2PMLHist15MPtmCrcErrs Counter32,
zxAnXdsl2PMLHist15MPtmCodViol Counter32,
zxAnXdsl2PMLHist15MValidInterval TruthValue
}
zxAnXdsl2PMLHist15MMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total seconds monitored in this interval."
::= { zxAnXdsl2PMLineHist15MinEntry 1 }
zxAnXdsl2PMLHist15MLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF ."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineHist15MinEntry 2 }
zxAnXdsl2PMLHist15MLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOL."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineHist15MinEntry 3 }
zxAnXdsl2PMLHist15MLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineHist15MinEntry 4 }
zxAnXdsl2PMLHist15MPtmCrcErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm Crc Errors during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineHist15MinEntry 5 }
zxAnXdsl2PMLHist15MPtmCodViol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm coding violations during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineHist15MinEntry 6 }
zxAnXdsl2PMLHist15MValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is
valid."
::= { zxAnXdsl2PMLineHist15MinEntry 7 }
--------------------------------------------------------------------------
-- 17.Trap
--------------------------------------------------------------------------
zxAnXdsl2LinePerfLOFSThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MLofs,
zxAnXdsl2XtucThreshLofs
}
STATUS current
DESCRIPTION
"This notification indicates that the LOF seconds
threshold has been reached/exceeded for the referred XTU-C."
::= { zxAnXdsl2TrapObjects 1 }
zxAnXdsl2LinePerfLOFSThreshXtur NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MLofs,
zxAnXdsl2XturThreshLofs
}
STATUS current
DESCRIPTION
"This notification indicates that the LOF seconds
threshold has been reached/exceeded for the referred XTU-R."
::= { zxAnXdsl2TrapObjects 2 }
zxAnXdsl2LinePerfLOLSThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MLols,
zxAnXdsl2XtucThreshLols
}
STATUS current
DESCRIPTION
"This notification indicates that the LOL seconds
threshold has been reached/exceeded for the referred XTU-C."
::= { zxAnXdsl2TrapObjects 3 }
-- zxAnXdsl2LinePerfLOLSThreshXtur NOTIFICATION-TYPE
-- OBJECTS
-- {
-- zxAnXdsl2PMLCurr15MLols,
-- zxAnXdsl2XturThreshLols
-- }
-- STATUS current
-- DESCRIPTION
-- "This notification indicates that the LOL seconds
-- threshold has been reached/exceeded for the referred XTU-R."
-- ::= { zxAnXdsl2TrapObjects 4 }
zxAnXdsl2LinePerfLPRSThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MLprs,
zxAnXdsl2XtucThreshLprs
}
STATUS current
DESCRIPTION
"This notification indicates that the LPR seconds
threshold has been reached/exceeded for the referred XTU-C."
::= { zxAnXdsl2TrapObjects 5 }
zxAnXdsl2LinePerfLPRSThreshXtur NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MLprs,
zxAnXdsl2XturThreshLprs
}
STATUS current
DESCRIPTION
"This notification indicates that the LPR seconds
threshold has been reached/exceeded for the referred XTU-R."
::= { zxAnXdsl2TrapObjects 6 }
zxAnXdsl2LinePerfPtmCrcErrsThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MPtmCrcErrs,
zxAnXdsl2XtucThreshPtmCrcErrs
}
STATUS current
DESCRIPTION
"This notification indicates that the Ptm Crc Errors
threshold has been reached/exceeded for the referred XTU-C."
::= { zxAnXdsl2TrapObjects 7 }
zxAnXdsl2LinePerfPtmCrcErrsThreshXtur NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MPtmCrcErrs,
zxAnXdsl2XturThreshPtmCrcErrs
}
STATUS current
DESCRIPTION
"This notification indicates that the Ptm Crc Errors
threshold has been reached/exceeded for the referred XTU-R."
::= { zxAnXdsl2TrapObjects 8 }
zxAnXdsl2LinePerfPtmCodViolsThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MPtmCodViol,
zxAnXdsl2XtucThreshPtmCodViol
}
STATUS current
DESCRIPTION
"This notification indicates that the Ptm coding violations
threshold has been reached/exceeded for the referred XTU-C."
::= { zxAnXdsl2TrapObjects 9 }
zxAnXdsl2LinePerfPtmCodViolsThreshXtur NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MPtmCodViol,
zxAnXdsl2XturThreshPtmCodViol
}
STATUS current
DESCRIPTION
"This notification indicates that the Ptm coding violations
threshold has been reached/exceeded for the referred XTU-R."
::= { zxAnXdsl2TrapObjects 10 }
zxAnXdsl2LineXtucLowDataRateTrap NOTIFICATION-TYPE
OBJECTS { zxAnXdsl2ChConfMaxDataRateDs, xdsl2ChStatusActDataRate,
zxAnXdsl2XtucLowDataRateTolerance, zxAnXdsl2XtucLowDataRateThresh}
STATUS current
DESCRIPTION
"zxAnXdsl2XtucLowDataRateTolerance threshold or zxAnXdsl2XtucLowDataRateThresh reached."
::= { zxAnXdsl2TrapObjects 11 }
zxAnXdsl2LineXtucLowDataRateClearTrap NOTIFICATION-TYPE
OBJECTS { zxAnXdsl2ChConfMaxDataRateDs, xdsl2ChStatusActDataRate,
zxAnXdsl2XtucLowDataRateTolerance, zxAnXdsl2XtucLowDataRateThresh}
STATUS current
DESCRIPTION
" zxAnXdsl2LineXtucLowDataRateTrap clear."
::= { zxAnXdsl2TrapObjects 12 }
zxAnXdsl2LineXturLowDataRateTrap NOTIFICATION-TYPE
OBJECTS { zxAnXdsl2ChConfMaxDataRateUs, xdsl2ChStatusActDataRate,
zxAnXdsl2XturLowDataRateTolerance, zxAnXdsl2XturLowDataRateThresh}
STATUS current
DESCRIPTION
"zxAnXdsl2XturLowDataRateTolerance threshold or zxAnXdsl2XturLowDataRateThresh reached."
::= { zxAnXdsl2TrapObjects 13 }
zxAnXdsl2LineXturLowDataRateClearTrap NOTIFICATION-TYPE
OBJECTS { zxAnXdsl2ChConfMaxDataRateUs, xdsl2ChStatusActDataRate,
zxAnXdsl2XturLowDataRateTolerance, zxAnXdsl2XturLowDataRateThresh}
STATUS current
DESCRIPTION
" zxAnXdsl2LineXturLowDataRateTrap clear."
::= { zxAnXdsl2TrapObjects 14 }
zxAnXdsl2DataPathMismatchTrap NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2LnStatusDataPathType,
zxAnXdsl2LnStatusActDataPathType
}
STATUS current
DESCRIPTION
"This trap will be sent to managemet system when configured
data path type is different from actual data path type on the
interface."
::= { zxAnXdsl2TrapObjects 15 }
zxAnXdsl2DataPathMismatchClrTrap NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2LnStatusDataPathType,
zxAnXdsl2LnStatusActDataPathType
}
STATUS current
DESCRIPTION
"zxAnXdsl2DataPathMismatchTrap will be cleared when configured
data path type matches actual data path type on the
interface."
::= { zxAnXdsl2TrapObjects 16 }
END
View Git Blame Copy Permalink