1175 lines
43 KiB
Plaintext
1175 lines
43 KiB
Plaintext
-------------------------------------------------------------------------------
|
|
-- File Name : ZTE-AN-MPLS-L2VPN-MIB.mib
|
|
-- Date : 2010-06-30
|
|
-- Author : ZTE Nms dept.
|
|
--
|
|
-- Zte MPLS L2VPN Mib for Access Node
|
|
--
|
|
--
|
|
-------------------------------------------------------------------------------
|
|
ZTE-AN-MPLS-L2VPN-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
experimental, Integer32, Unsigned32,
|
|
Counter64, TimeTicks, IpAddress
|
|
FROM SNMPv2-SMI
|
|
IANAPwTypeTC
|
|
FROM ZX-PWE3-MIB
|
|
RowStatus, DisplayString, MacAddress, TruthValue, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
ZxAnIfindex
|
|
FROM ZTE-AN-TC-MIB
|
|
InetAddressType, InetAddress
|
|
FROM INET-ADDRESS-MIB -- [RFC4001]
|
|
IANAPwTypeTC, IANAPwPsnTypeTC
|
|
FROM ZX-PWE3-MIB
|
|
PwIndexType
|
|
FROM ZXPW-TC-STD-MIB
|
|
zxAn
|
|
FROM ZTE-AN-TC-MIB;
|
|
|
|
zxAnMplsL2vpnMib MODULE-IDENTITY
|
|
LAST-UPDATED "201006301500Z"
|
|
ORGANIZATION
|
|
"ZTE Corporation."
|
|
CONTACT-INFO
|
|
"ZTE NMS dept.
|
|
Guo jingwen 68895526
|
|
Cheng haixia 68895526 "
|
|
|
|
DESCRIPTION "This MIB contains managed object definitions for MPLS L2VPN
|
|
operation."
|
|
::= { zxAn 59 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- Groups in the ZTE AN MPLS L2VPN MIB Module
|
|
-------------------------------------------------------------------------------
|
|
zxAnL2vpnGlobalObjects OBJECT IDENTIFIER ::= {zxAnMplsL2vpnMib 1}
|
|
zxAnVpwsObjects OBJECT IDENTIFIER ::= {zxAnMplsL2vpnMib 2}
|
|
zxAnVplsObjects OBJECT IDENTIFIER ::= {zxAnMplsL2vpnMib 3}
|
|
zxAnTdmRelayObjects OBJECT IDENTIFIER ::= {zxAnMplsL2vpnMib 4}
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- Textual conventions
|
|
-------------------------------------------------------------------------------
|
|
ZxAnMplsVccvCcType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control Channel (CC) types:
|
|
pwAch(0) (0x01) - Type 1: PWE3 Control Word with 0001b
|
|
as first nibble(PW-ACH, see [RFC4385])
|
|
mplsRouterAlertLbl(1) (0x02) - Type 2: MPLS Router Alert Label
|
|
mplsPwLblTtlEqualsOne(2) (0x04) - Type 3: MPLS PW Label with
|
|
TTL == 1
|
|
Bit 3 (0x08) - Reserved
|
|
Bit 4 (0x10) - Reserved
|
|
Bit 5 (0x20) - Reserved
|
|
Bit 6 (0x40) - Reserved
|
|
Bit 7 (0x80) - Reserved"
|
|
SYNTAX BITS
|
|
{
|
|
pwAch(0),
|
|
mplsRouterAlertLbl(1),
|
|
mplsPwLblTtlEqualsOne(2),
|
|
reserved1(3),
|
|
reserved2(4),
|
|
reserved3(5),
|
|
reserved4(6),
|
|
reserved5(7)
|
|
}
|
|
|
|
ZxAnMplsVccvCvType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Connectivity Verification (CV) Types:
|
|
icmpPing(0) (0x01) - ICMP Ping
|
|
lspPing(1) (0x02) - LSP Ping
|
|
bfd(2) (0x04) - BFD
|
|
Bit 3 (0x08) - Reserved
|
|
Bit 4 (0x10) - Reserved
|
|
Bit 5 (0x20) - Reserved
|
|
Bit 6 (0x40) - Reserved
|
|
Bit 7 (0x80) - Reserved"
|
|
SYNTAX BITS
|
|
{
|
|
icmpPing(0),
|
|
lspPing(1),
|
|
bfd(2),
|
|
reserved1(3),
|
|
reserved2(4),
|
|
reserved3(5),
|
|
reserved4(6),
|
|
reserved5(7)
|
|
}
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Following objects are defined.
|
|
-- 1.zxAn MPLS L2VPN global mgmt objects
|
|
-- 2.zxAn MPLS L2VPN VPWS objects
|
|
-- 3.zxAn MPLS L2VPN VPLS objects
|
|
-- 4.zxAn MPLS L2VPN TDM-RELAY objects
|
|
------------------------------------------------------------------------------
|
|
|
|
------------------------------------------------------------------------------
|
|
-- 1.zxAn MPLS L2VPN global mgmt objects
|
|
-- 1.11 zxAn MPLS L2VPN static pseudo wire profile table
|
|
------------------------------------------------------------------------------
|
|
|
|
----------------------------------------------------------------
|
|
-- 1.11 zxAn MPLS L2VPN static pseudo wire profile table
|
|
----------------------------------------------------------------
|
|
zxAnMplsStaticPwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnMplsStaticPwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about the
|
|
MPLS L2VPN static pseudo wire(PW)."
|
|
::= { zxAnL2vpnGlobalObjects 11 }
|
|
|
|
zxAnMplsStaticPwEntry OBJECT-TYPE
|
|
SYNTAX ZxAnMplsStaticPwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for zxAnMplsStaticPwTable."
|
|
INDEX { zxAnMplsStaticPwName }
|
|
::= { zxAnMplsStaticPwTable 1 }
|
|
|
|
ZxAnMplsStaticPwEntry ::= SEQUENCE {
|
|
zxAnMplsStaticPwName DisplayString,
|
|
zxAnMplsOutgoingPwLabel Unsigned32,
|
|
zxAnMplsIncomingPwLabel Unsigned32,
|
|
zxAnMplsStaticPwRowStatus RowStatus
|
|
}
|
|
|
|
zxAnMplsStaticPwName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pseudo wire profile name."
|
|
::= { zxAnMplsStaticPwEntry 2 }
|
|
|
|
zxAnMplsOutgoingPwLabel OBJECT-TYPE
|
|
SYNTAX Unsigned32(1044479..1048575)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pseudo wire label used in the outbound direction (i.e. toward
|
|
the PSN). It may be set up manually if owner is 'manual'
|
|
or automatically otherwise. Examples: For MPLS PSN, it
|
|
represents the 20 bits of pseudo wire tag, for L2TP it represents
|
|
the 32 bits Session ID.
|
|
If the label is not yet known (signaling in process), the
|
|
object should return a value of 0xFFFF."
|
|
::= { zxAnMplsStaticPwEntry 3 }
|
|
|
|
zxAnMplsIncomingPwLabel OBJECT-TYPE
|
|
SYNTAX Unsigned32(16..1048575)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pseudo wire label used in the inbound direction (i.e. packets
|
|
received from the PSN. It may be set up manually if owner
|
|
is 'manual' or automatically otherwise.
|
|
Examples: For MPLS PSN, it represents the 20 bits of pseudo wire
|
|
tag, for L2TP it represent the 32 bits Session ID.
|
|
If the label is not yet known (signaling in process), the
|
|
object should return a value of 0xFFFF."
|
|
::= { zxAnMplsStaticPwEntry 4 }
|
|
|
|
zxAnMplsStaticPwRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status of the Table."
|
|
::= { zxAnMplsStaticPwEntry 31 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- 2. zxAn MPLS L2VPN VPWS objects
|
|
-- 2.11 zxAn MPLS L2VPN VPWS table
|
|
------------------------------------------------------------------------------
|
|
|
|
------------------------------------------------------------------------------
|
|
-- 2.11 zxAn MPLS L2VPN VPWS table
|
|
------------------------------------------------------------------------------
|
|
zxAnVpwsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnVpwsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about the MPLS L2VPN VPWS.VPWS
|
|
L2VPNs employ layer 2 services over MPLS to build a topology of
|
|
point-to-point connections that connect end customer sites in a VPN.
|
|
These L2VPNs provide an alternative to private networks that have been
|
|
provisioned by means of dedicated leased lines or by means of layer 2
|
|
virtual circuits that employ ATM or Frame Relay. The service
|
|
provisioned with these L2VPNs is known as Virtual Private Wire Service
|
|
(VPWS). "
|
|
::= { zxAnVpwsObjects 11 }
|
|
|
|
zxAnVpwsEntry OBJECT-TYPE
|
|
SYNTAX ZxAnVpwsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for zxAnVpwsTable."
|
|
INDEX { zxAnVpwsL3IfIndex }
|
|
::= { zxAnVpwsTable 1 }
|
|
|
|
ZxAnVpwsEntry ::= SEQUENCE {
|
|
zxAnVpwsL3IfIndex ZxAnIfindex,
|
|
zxAnVpwsPeerIpAddrType InetAddressType,
|
|
zxAnVpwsPeerIpAddr InetAddress,
|
|
zxAnVpwsVcId Unsigned32,
|
|
zxAnVpwsPwType IANAPwTypeTC,
|
|
zxAnVpwsStaticPwName DisplayString,
|
|
zxAnVpwsStandbyPeerIpAddrType InetAddressType,
|
|
zxAnVpwsStandbyPeerIpAddr InetAddress,
|
|
zxAnVpwsStandbyVcId Unsigned32,
|
|
zxAnVpwsPwe3CWPreferred TruthValue,
|
|
zxAnVpwsVccvEnable INTEGER,
|
|
zxAnVpwsCcTypeCapability ZxAnMplsVccvCcType,
|
|
zxAnVpwsCvTypeCapability ZxAnMplsVccvCvType,
|
|
zxAnVpwsRowStatus RowStatus
|
|
}
|
|
|
|
zxAnVpwsL3IfIndex OBJECT-TYPE
|
|
SYNTAX ZxAnIfindex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. The field of interface type in
|
|
ZxAnIfindex for L3 is 0xF(Layer 3 interface)."
|
|
::= { zxAnVpwsEntry 1 }
|
|
|
|
zxAnVpwsPeerIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the address type of the peer node. It should be
|
|
set to 'unknown' if PE/pseudo wire(PW) maintenance protocol is not
|
|
used and the address is unknown."
|
|
DEFVAL { ipv4 }
|
|
::= { zxAnVpwsEntry 2 }
|
|
|
|
zxAnVpwsPeerIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the peer node address
|
|
of the pseudo pire(PW)/PE maintenance protocol entity. This object
|
|
SHOULD contain a value of all zeroes if not applicable
|
|
(zxPwPeerAddrType is 'unknown')."
|
|
::= { zxAnVpwsEntry 3 }
|
|
|
|
zxAnVpwsVcId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used in the outgoing VC ID field within the 'Virtual
|
|
Circuit FEC Element' when LDP signaling is used or pseudo wire ID
|
|
AVP for L2TP."
|
|
::= { zxAnVpwsEntry 4 }
|
|
|
|
zxAnVpwsPwType OBJECT-TYPE
|
|
SYNTAX IANAPwTypeTC
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the pseudo wire type (i.e. the carried service). "
|
|
::= { zxAnVpwsEntry 5 }
|
|
|
|
zxAnVpwsStaticPwName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPWS pseudo wire profile."
|
|
::= { zxAnVpwsEntry 6 }
|
|
|
|
zxAnVpwsStandbyPeerIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of standby peer ip address."
|
|
DEFVAL { ipv4 }
|
|
::= { zxAnVpwsEntry 7 }
|
|
|
|
zxAnVpwsStandbyPeerIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standby peer IP address."
|
|
::= { zxAnVpwsEntry 8 }
|
|
|
|
zxAnVpwsStandbyVcId OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standby VC ID."
|
|
::= { zxAnVpwsEntry 9 }
|
|
|
|
zxAnVpwsPwe3CWPreferred OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates LDP entity prefers to use control word or not in PW."
|
|
DEFVAL { false }
|
|
::= { zxAnVpwsEntry 10 }
|
|
|
|
zxAnVpwsVccvEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCCV(Virtual Circuit Connectivity Verification) enable switch.
|
|
VCCV provides a control channel that is associated with
|
|
a pseudowire (PW), as well as the corresponding operations and
|
|
management functions (such as connectivity verification)
|
|
to be used over that control channel."
|
|
DEFVAL { enable }
|
|
::= { zxAnVpwsEntry 11 }
|
|
|
|
zxAnVpwsCcTypeCapability OBJECT-TYPE
|
|
SYNTAX ZxAnMplsVccvCcType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control Channel(CC) types Capability, it indicates which CC types
|
|
are supported."
|
|
::= { zxAnVpwsEntry 12 }
|
|
|
|
zxAnVpwsCvTypeCapability OBJECT-TYPE
|
|
SYNTAX ZxAnMplsVccvCvType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Connectivity Verification (CV) Types Capability, it indicates
|
|
which CV types are supported."
|
|
::= { zxAnVpwsEntry 13 }
|
|
|
|
zxAnVpwsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status of the Table."
|
|
::= { zxAnVpwsEntry 31 }
|
|
|
|
----------------------------------------------------------
|
|
-- 3.zxAn MPLS L2VPN VPLS objects
|
|
-- 3.11 VPLS VFI config table
|
|
-- 3.12 VPLS Peer address config table
|
|
-- 3.13 L3 Interface VFI Config
|
|
-- 3.14 VPLS VFI MAC Config
|
|
----------------------------------------------------------
|
|
|
|
----------------------------------------------------------
|
|
-- 2.11 VPLS VFI config table
|
|
----------------------------------------------------------
|
|
|
|
zxAnVplsVfiConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnVplsVfiConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPLS config table."
|
|
::= { zxAnVplsObjects 11 }
|
|
|
|
zxAnVplsVfiConfigEntry OBJECT-TYPE
|
|
SYNTAX ZxAnVplsVfiConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPLS config Entry.Virtual Forwarding Instance (VFI)is a virtual
|
|
Layer 2 forwarding entity that defines the VPLS domain membership
|
|
and resembles virtual switches on PE routers.Each VFI maintains
|
|
its own MAC table. Provides the Ethernet bridge
|
|
function within the n-PE."
|
|
INDEX { zxAnVplsVfiName }
|
|
::= { zxAnVplsVfiConfigTable 1 }
|
|
|
|
ZxAnVplsVfiConfigEntry ::=
|
|
SEQUENCE {
|
|
zxAnVplsVfiName DisplayString,
|
|
zxAnVplsVfiVcid Unsigned32,
|
|
zxAnVplsVfiPwType IANAPwTypeTC,
|
|
zxAnVplsVfiMaxMacLearningNum INTEGER,
|
|
zxAnVplsVfiRemoteMacAgingTime INTEGER,
|
|
zxAnVplsVfiLocalMacAgingTime INTEGER,
|
|
zxAnVplsVfiBCastRateLimit INTEGER,
|
|
zxAnVplsVfiMCastRateLimit INTEGER,
|
|
zxAnVplsVfiUnknownUCastRateLimit INTEGER,
|
|
zxAnVplsVfiVcidType INTEGER,
|
|
zxAnVplsVfiPwe3CWPreferred TruthValue,
|
|
zxAnVplsVfiVccvEnable INTEGER,
|
|
zxAnVplsVfiCcTypeCapability ZxAnMplsVccvCcType,
|
|
zxAnVplsVfiCvTypeCapability ZxAnMplsVccvCvType,
|
|
zxAnVplsVfiRowStatus RowStatus
|
|
}
|
|
|
|
zxAnVplsVfiName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual Forwarding Instance (VFI)is a virtual
|
|
Layer 2 forwarding entity that defines the VPLS domain
|
|
membership and resembles virtual switches on PE routers.
|
|
Each Virtual Forwarding Instance maintains its own MAC
|
|
table. Provides the Ethernet bridge function within the n-PE."
|
|
::= { zxAnVplsVfiConfigEntry 1 }
|
|
|
|
zxAnVplsVfiVcid OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configures Virtual
|
|
Circuit id. When VPLS instances of two PE
|
|
routers belong to same VPLS region, it is required to
|
|
establish pseudo wire to continue the communication between
|
|
VPLS instances. PE establishes pseudo wire to identify mpls
|
|
lining-label (or called VC label. Mpls outer-label, which
|
|
compose lsp, together with Virtual Circuit label,compose
|
|
the pseudo wire) of VPLS region with each other. Virtual
|
|
Circuit ID configured by vcid is used to identify
|
|
the VPLS domain when PE switches VC label.When create,this value
|
|
can not be modified."
|
|
::= { zxAnVplsVfiConfigEntry 2 }
|
|
|
|
zxAnVplsVfiPwType OBJECT-TYPE
|
|
SYNTAX IANAPwTypeTC
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Two PEs need to negotiate pseudo wire type when they establish
|
|
PW.There are two types of PWs in VPLS which are ethernet and
|
|
ethernet-vlan.The former one supports transparent transmission
|
|
mode, the latter one supports label replacement mode.When pseudo
|
|
wire types are different with each other, pseudo wire can
|
|
not be established.When create,this value
|
|
can not be modified."
|
|
::= { zxAnVplsVfiConfigEntry 3 }
|
|
|
|
zxAnVplsVfiMaxMacLearningNum OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65536)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max MAC learning number."
|
|
::= { zxAnVplsVfiConfigEntry 4 }
|
|
|
|
zxAnVplsVfiRemoteMacAgingTime OBJECT-TYPE
|
|
SYNTAX INTEGER(180..3600)
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote MAC aging time."
|
|
DEFVAL{180}
|
|
::= { zxAnVplsVfiConfigEntry 5 }
|
|
|
|
zxAnVplsVfiLocalMacAgingTime OBJECT-TYPE
|
|
SYNTAX INTEGER(180..3600)
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local MAC aging time."
|
|
DEFVAL{180}
|
|
::= { zxAnVplsVfiConfigEntry 6 }
|
|
|
|
zxAnVplsVfiBCastRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER(64..16384000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Broadcast rate limit."
|
|
::= { zxAnVplsVfiConfigEntry 7 }
|
|
|
|
zxAnVplsVfiMCastRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER(64..16384000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast rate limit."
|
|
::= { zxAnVplsVfiConfigEntry 8 }
|
|
|
|
zxAnVplsVfiUnknownUCastRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER(64..16384000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unknown unicast rate limit."
|
|
::= { zxAnVplsVfiConfigEntry 9 }
|
|
|
|
zxAnVplsVfiVcidType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dynamic(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCID Type, default value is dynamic. If VCID type configured here
|
|
is static, it indicates the VPLS domain is static too."
|
|
DEFVAL { dynamic }
|
|
::= { zxAnVplsVfiConfigEntry 10 }
|
|
|
|
zxAnVplsVfiPwe3CWPreferred OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates LDP entity prefers to use control word or not in PW."
|
|
DEFVAL { false }
|
|
::= { zxAnVplsVfiConfigEntry 11 }
|
|
|
|
zxAnVplsVfiVccvEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCCV(Virtual Circuit Connectivity Verification) enable switch.
|
|
VCCV provides a control channel that is associated with
|
|
a pseudowire (PW), as well as the corresponding operations and
|
|
management functions (such as connectivity verification)
|
|
to be used over that control channel."
|
|
DEFVAL { enable }
|
|
::= { zxAnVplsVfiConfigEntry 12 }
|
|
|
|
zxAnVplsVfiCcTypeCapability OBJECT-TYPE
|
|
SYNTAX ZxAnMplsVccvCcType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control Channel(CC) types Capability, it indicates which CC types
|
|
are supported."
|
|
::= { zxAnVplsVfiConfigEntry 13 }
|
|
|
|
zxAnVplsVfiCvTypeCapability OBJECT-TYPE
|
|
SYNTAX ZxAnMplsVccvCvType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Connectivity Verification (CV) Types Capability, it indicates
|
|
which CV types are supported."
|
|
::= { zxAnVplsVfiConfigEntry 14 }
|
|
|
|
zxAnVplsVfiRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rowstatus of zxAnVplsVfiConfigTable"
|
|
::= { zxAnVplsVfiConfigEntry 30 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- 2.12 VPLS Peer address config table
|
|
---------------------------------------------------------------------------
|
|
|
|
zxAnVplsVfiPeerIpAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnVplsVfiPeerIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPLS VFI peer address config table."
|
|
::= { zxAnVplsObjects 12 }
|
|
|
|
zxAnVplsVfiPeerIpAddrEntry OBJECT-TYPE
|
|
SYNTAX ZxAnVplsVfiPeerIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPLS VFI peer address entry."
|
|
INDEX { zxAnVplsVfiName,zxAnVplsVfiPeerIpAddrType,
|
|
zxAnVplsVfiPeerIpAddr }
|
|
::= { zxAnVplsVfiPeerIpAddrTable 1 }
|
|
|
|
ZxAnVplsVfiPeerIpAddrEntry ::=
|
|
SEQUENCE {
|
|
zxAnVplsVfiPeerIpAddrType InetAddressType,
|
|
zxAnVplsVfiPeerIpAddr InetAddress,
|
|
zxAnVplsVfiStandbyPeerIpAddrType InetAddressType,
|
|
zxAnVplsVfiStandbyPeerIpAddr InetAddress,
|
|
zxAnVplsVfiStaticPwName DisplayString,
|
|
zxAnVplsVfiPwNetType INTEGER,
|
|
zxAnVplsVfiPeerRowStatus RowStatus
|
|
}
|
|
|
|
zxAnVplsVfiPeerIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPLS VFI peer address type."
|
|
DEFVAL { ipv4 }
|
|
::= { zxAnVplsVfiPeerIpAddrEntry 1 }
|
|
|
|
zxAnVplsVfiPeerIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configures VFI parameterpeer. It is required to
|
|
designate all PE addresses in one VPLS region."
|
|
::= { zxAnVplsVfiPeerIpAddrEntry 2 }
|
|
|
|
zxAnVplsVfiStandbyPeerIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPLS VFI standby peer address type."
|
|
DEFVAL { ipv4 }
|
|
::= { zxAnVplsVfiPeerIpAddrEntry 3 }
|
|
|
|
zxAnVplsVfiStandbyPeerIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Standby Peer Ip Address."
|
|
::= { zxAnVplsVfiPeerIpAddrEntry 4 }
|
|
|
|
zxAnVplsVfiStaticPwName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..20))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static pseudo wire name.VFI will use the pseudo wire which
|
|
you configured.If not specified pseudo wire name,
|
|
VFI will learn pseudo wire."
|
|
::= { zxAnVplsVfiPeerIpAddrEntry 5 }
|
|
|
|
zxAnVplsVfiPwNetType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
spoke(1),
|
|
hub(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configures L2VPN VPLS using static pseudo wire in VFI
|
|
configuration mode, hub by default."
|
|
DEFVAL {hub}
|
|
::= { zxAnVplsVfiPeerIpAddrEntry 6 }
|
|
|
|
zxAnVplsVfiPeerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rowstatus of zxAnVplsVfiPeerIpAddrTable"
|
|
::= { zxAnVplsVfiPeerIpAddrEntry 20 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 2.13 L3 Interface VFI Config
|
|
-------------------------------------------------------------------------------
|
|
zxAnL3IfVfiConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnL3IfVfiConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"L3 interface vfi config table."
|
|
REFERENCE ""
|
|
::= { zxAnVplsObjects 13 }
|
|
|
|
zxAnL3IfVfiConfigEntry OBJECT-TYPE
|
|
SYNTAX ZxAnL3IfVfiConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"T"
|
|
INDEX { zxAnL3IfVfiIfIndex }
|
|
::= { zxAnL3IfVfiConfigTable 1 }
|
|
|
|
ZxAnL3IfVfiConfigEntry ::=
|
|
SEQUENCE {
|
|
zxAnL3IfVfiIfIndex ZxAnIfindex,
|
|
zxAnL3IfVfiName DisplayString,
|
|
zxAnL3IfVfiRowStatus RowStatus
|
|
}
|
|
|
|
zxAnL3IfVfiIfIndex OBJECT-TYPE
|
|
SYNTAX ZxAnIfindex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each interface. The field of
|
|
interface type in ZxAnIfindex for L3 is 0xF(Layer
|
|
3 interface)."
|
|
::= { zxAnL3IfVfiConfigEntry 1 }
|
|
|
|
zxAnL3IfVfiName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is a record of zxAnVplsVfiConfigTable."
|
|
::= { zxAnL3IfVfiConfigEntry 2 }
|
|
|
|
zxAnL3IfVfiRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status of zxAnL3IfVfiConfigTable."
|
|
::= { zxAnL3IfVfiConfigEntry 20 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- 2.14 VPLS VFI MAC Config
|
|
------------------------------------------------------------------------
|
|
|
|
zxAnVplsVfiMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnVplsVfiMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VFI MAC table config."
|
|
::= { zxAnVplsObjects 14 }
|
|
|
|
zxAnVplsVfiMacEntry OBJECT-TYPE
|
|
SYNTAX ZxAnVplsVfiMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of zxAnVplsVfiMacTable"
|
|
INDEX { zxAnVplsVfiName,zxAnVplsVfiMacAddrType,
|
|
zxAnVplsVfiMacAddr}
|
|
::= { zxAnVplsVfiMacTable 1}
|
|
|
|
ZxAnVplsVfiMacEntry ::=
|
|
SEQUENCE {
|
|
zxAnVplsVfiMacAddrType INTEGER,
|
|
zxAnVplsVfiMacAddr MacAddress,
|
|
zxAnVplsVfiMacAddrConfLocation INTEGER,
|
|
zxAnVplsVfiMacL3IfVlanIndex ZxAnIfindex,
|
|
zxAnVplsVfiMacPeerIpAddrType InetAddressType,
|
|
zxAnVplsVfiMacPeerIpAddr InetAddress,
|
|
zxAnVplsVfiMacInnerOutgoingLabel INTEGER,
|
|
zxAnVplsVfiMacOuterOutgoingLabel INTEGER,
|
|
zxAnVplsVfiMacRowStatus RowStatus
|
|
}
|
|
|
|
zxAnVplsVfiMacAddrType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dynamic(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A MAC address type,such as dynamic
|
|
or static MAC."
|
|
::= { zxAnVplsVfiMacEntry 1}
|
|
|
|
zxAnVplsVfiMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local or remote MAC address."
|
|
::= { zxAnVplsVfiMacEntry 2 }
|
|
|
|
zxAnVplsVfiMacAddrConfLocation OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
local(1),
|
|
remote(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address can be configured at AC(local)
|
|
or pseudo wire(remote)."
|
|
::= { zxAnVplsVfiMacEntry 3 }
|
|
|
|
zxAnVplsVfiMacL3IfVlanIndex OBJECT-TYPE
|
|
SYNTAX ZxAnIfindex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"L3 interface vlan id.It configured when
|
|
zxAnVplsVfiMacAddrLocation is local."
|
|
::= { zxAnVplsVfiMacEntry 4 }
|
|
|
|
zxAnVplsVfiMacPeerIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPLS VFI peer ip Address type."
|
|
DEFVAL { ipv4 }
|
|
::= { zxAnVplsVfiMacEntry 5 }
|
|
|
|
zxAnVplsVfiMacPeerIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VFI peer ip address.It will be configured when
|
|
zxAnVplsVfiMacAddrLocation is remote."
|
|
::= { zxAnVplsVfiMacEntry 6 }
|
|
|
|
zxAnVplsVfiMacInnerOutgoingLabel OBJECT-TYPE
|
|
SYNTAX INTEGER(16..1048575)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When zxAnVplsVfiMacAddrLocation value is remote,
|
|
zxAnVplsVfiMacInnerOutgoingLabel has virtual value."
|
|
::= { zxAnVplsVfiMacEntry 7 }
|
|
|
|
zxAnVplsVfiMacOuterOutgoingLabel OBJECT-TYPE
|
|
SYNTAX INTEGER(16..1048575)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When zxAnVplsVfiMacAddrLocation value is remote,
|
|
zxAnVplsVfiMacOuterOutgoingLabel has virtual value."
|
|
::= { zxAnVplsVfiMacEntry 8 }
|
|
|
|
zxAnVplsVfiMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of zxAnVplsVfiMacTable.
|
|
When zxAnVplsVfiMacAddrType is dynamic,zxAnVplsVfiMacRowStatus
|
|
can not be set DELETE. "
|
|
::= { zxAnVplsVfiMacEntry 30 }
|
|
|
|
|
|
----------------------------------------------------------
|
|
-- 4.zxAn MPLS L2VPN TDM-RELAY objects
|
|
-- 4.11 TDM-RELAY PW config table
|
|
-- 4.12 TDM-RELAY TDM source MAC config table
|
|
----------------------------------------------------------
|
|
|
|
----------------------------------------------------------
|
|
-- 4.11 TDM-RELAY PW config table
|
|
----------------------------------------------------------
|
|
zxAnTRPwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnTRPwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies information for configuring and
|
|
status monitoring which are common to all service types
|
|
and PSN types."
|
|
::= { zxAnTdmRelayObjects 11 }
|
|
|
|
zxAnTRPwEntry OBJECT-TYPE
|
|
SYNTAX ZxAnTRPwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents a pseudo wire (PW) virtual
|
|
connection across a packet network. It is indexed by
|
|
zxPwIndex, which uniquely identifying a singular
|
|
connection.
|
|
A row is created by the operator or by the agent if the PW
|
|
is created by non-SNMP application or due to auto-discovery
|
|
process.
|
|
None of the read-create objects values can be changed
|
|
when zxPwRowStatus is in the active(1) state. Changes are
|
|
allowed when the zxPwRowStatus is in notInService(2) or
|
|
notReady(3) states only.
|
|
If the operator need to change one of the values for an
|
|
active row (for example in order to fix a mismatch in
|
|
configuration between the local node and the peer), the
|
|
zxPwRowStatus should be first changed to notInService(2),
|
|
the objects may be changed now, and later to active(1)
|
|
in order to re-initiate the signaling process with the
|
|
new values in effect. "
|
|
INDEX { zxAnTRPwIndex }
|
|
::= { zxAnTRPwTable 1 }
|
|
|
|
ZxAnTRPwEntry ::= SEQUENCE {
|
|
zxAnTRPwIndex PwIndexType,
|
|
zxAnTRPwType IANAPwTypeTC,
|
|
zxAnTRPwPsnType IANAPwPsnTypeTC,
|
|
zxAnTRPwPeerIpAddrType InetAddressType,
|
|
zxAnTRPwPeerIpAddr InetAddress,
|
|
zxAnTRPwPeerVcId Unsigned32,
|
|
zxAnTRPwStandbyPeerIpAddrType InetAddressType,
|
|
zxAnTRPwStandbyPeerIpAddr InetAddress,
|
|
zxAnTRPwStandbyPeerVcId Unsigned32,
|
|
zxAnTRPwOutboundLabel Unsigned32,
|
|
zxAnTRPwInboundLabel Unsigned32,
|
|
zxAnTRPwOutboundTunnelLabel Unsigned32,
|
|
zxAnTRPwInboundTunnelLabel Unsigned32,
|
|
zxAnTRPwPayloadSize Unsigned32,
|
|
zxAnTRPwDstMac MacAddress,
|
|
zxAnTRPwVlanId Unsigned32,
|
|
zxAnTRPwPrio INTEGER,
|
|
zxAnTRPwRowStatus RowStatus
|
|
}
|
|
|
|
zxAnTRPwIndex OBJECT-TYPE
|
|
SYNTAX PwIndexType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index for the conceptual row identifying a PW within
|
|
this PW Emulation table."
|
|
::= { zxAnTRPwEntry 1 }
|
|
|
|
zxAnTRPwType OBJECT-TYPE
|
|
SYNTAX IANAPwTypeTC
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the service to be carried over
|
|
this PW."
|
|
::= { zxAnTRPwEntry 2 }
|
|
|
|
zxAnTRPwPsnType OBJECT-TYPE
|
|
SYNTAX IANAPwPsnTypeTC
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set by the operator to indicates the PSN type. Based on
|
|
this object, the relevant PSN table entries are created
|
|
in the in the PSN specific MIB modules."
|
|
::= { zxAnTRPwEntry 3 }
|
|
|
|
zxAnTRPwPeerIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the address type of the peer node. It should be
|
|
set to 'unknown' if PE/PW maintenance protocol is not used
|
|
and the address is unknown."
|
|
::= { zxAnTRPwEntry 4 }
|
|
|
|
zxAnTRPwPeerIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the peer node address
|
|
of the PW/PE maintenance protocol entity. This object
|
|
SHOULD contain a value of all zeroes if not applicable."
|
|
::= { zxAnTRPwEntry 5 }
|
|
|
|
zxAnTRPwPeerVcId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used in the outgoing VC ID field within the 'Virtual
|
|
Circuit FEC Element' when LDP signaling is used or PW ID
|
|
AVP for L2TP."
|
|
::= { zxAnTRPwEntry 6 }
|
|
|
|
zxAnTRPwStandbyPeerIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the address type of the peer node. It should be
|
|
set to 'unknown' if PE/PW maintenance protocol is not used
|
|
and the address is unknown."
|
|
::= { zxAnTRPwEntry 7 }
|
|
|
|
zxAnTRPwStandbyPeerIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the standby peer node address
|
|
of the PW/PE maintenance protocol entity. This object
|
|
SHOULD contain a value of all zeroes if not applicable."
|
|
::= { zxAnTRPwEntry 8 }
|
|
|
|
zxAnTRPwStandbyPeerVcId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used in the outgoing VC ID field within the 'Virtual
|
|
Circuit FEC Element' when LDP signaling is used or PW ID
|
|
AVP for L2TP."
|
|
::= { zxAnTRPwEntry 9 }
|
|
|
|
zxAnTRPwOutboundLabel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PW label used in the outbound direction (i.e. toward
|
|
the PSN). It may be set up manually if owner is 'manual'
|
|
or automatically otherwise. Examples: For MPLS PSN, it
|
|
represents the 20 bits of PW tag, for L2TP it represents
|
|
the 32 bits Session ID.
|
|
If the label is not yet known (signaling in process), the
|
|
object should return a value of 0xFFFF."
|
|
::= { zxAnTRPwEntry 10 }
|
|
|
|
zxAnTRPwInboundLabel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PW label used in the inbound direction (i.e. packets
|
|
received from the PSN. It may be set up manually if owner
|
|
is 'manual' or automatically otherwise.
|
|
Examples: For MPLS PSN, it represents the 20 bits of PW
|
|
tag, for L2TP it represent the 32 bits Session ID.
|
|
If the label is not yet known (signaling in process), the
|
|
object should return a value of 0xFFFF."
|
|
::= { zxAnTRPwEntry 11 }
|
|
|
|
zxAnTRPwOutboundTunnelLabel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MPLS Outbound Tunnel Label."
|
|
::= { zxAnTRPwEntry 12 }
|
|
|
|
zxAnTRPwInboundTunnelLabel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MPLS Inbound Tunnel Label."
|
|
::= { zxAnTRPwEntry 13 }
|
|
|
|
zxAnTRPwPayloadSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates the PayLoad Size (in bytes)
|
|
to be defined during the PW setUp. Upon TX, implementation
|
|
must be capable of carrying that amount of bytes.
|
|
Upon RX, when the LEN field is set to 0, the payload of
|
|
packet MUST assume this size, and if the actual
|
|
packet size is inconsistent with this length,
|
|
the packet MUST be considered to be malformed. "
|
|
::= { zxAnTRPwEntry 14 }
|
|
|
|
zxAnTRPwDstMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address of a pseudo wire (PW) virtual
|
|
connection."
|
|
::= { zxAnTRPwEntry 15 }
|
|
|
|
zxAnTRPwVlanId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the vlan."
|
|
::= { zxAnTRPwEntry 16 }
|
|
|
|
zxAnTRPwPrio OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the priority."
|
|
::= { zxAnTRPwEntry 17 }
|
|
|
|
zxAnTRPwRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For creating, modifying, and deleting this row. None of the
|
|
read-create objects in the conceptual rows may be changed
|
|
when this object is in the active(1) state."
|
|
::= { zxAnTRPwEntry 30 }
|
|
|
|
----------------------------------------------------------
|
|
-- 4.12 TDM-RELAY TDM source MAC config table
|
|
----------------------------------------------------------
|
|
zxAnTRTdmSrcMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnTRTdmSrcMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies information for configuring TDM source MAC
|
|
address."
|
|
::= { zxAnTdmRelayObjects 12 }
|
|
|
|
zxAnTRTdmSrcMacEntry OBJECT-TYPE
|
|
SYNTAX ZxAnTRTdmSrcMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for zxAnTRTdmSrcMacTable. "
|
|
INDEX { zxAnTRTdmSrcRackNo,zxAnTRTdmSrcShelfNo, zxAnTRTdmSrcSlotNo}
|
|
::= { zxAnTRTdmSrcMacTable 1 }
|
|
|
|
ZxAnTRTdmSrcMacEntry ::= SEQUENCE {
|
|
zxAnTRTdmSrcRackNo Integer32,
|
|
zxAnTRTdmSrcShelfNo Integer32,
|
|
zxAnTRTdmSrcSlotNo Integer32,
|
|
zxAnTRTdmSrcMac MacAddress
|
|
}
|
|
|
|
zxAnTRTdmSrcRackNo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rack number."
|
|
::= { zxAnTRTdmSrcMacEntry 1 }
|
|
|
|
zxAnTRTdmSrcShelfNo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shelf number."
|
|
::= { zxAnTRTdmSrcMacEntry 2 }
|
|
|
|
zxAnTRTdmSrcSlotNo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slot number."
|
|
::= { zxAnTRTdmSrcMacEntry 3 }
|
|
|
|
zxAnTRTdmSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the TDM source MAC address."
|
|
::= { zxAnTRTdmSrcMacEntry 4 }
|
|
|
|
END |