1575 lines
61 KiB
Plaintext
1575 lines
61 KiB
Plaintext
ZTE-AN-INTERFACE-ETH-PERF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Integer32, Gauge32, Counter64 FROM SNMPv2-SMI
|
|
RowStatus, DisplayString, TruthValue,
|
|
TEXTUAL-CONVENTION, DateAndTime FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
ifIndex FROM IF-MIB
|
|
zxAnInterfaceMib FROM ZTE-AN-INTERFACE-MIB
|
|
HCPerfCurrentCount FROM HC-PerfHist-TC-MIB;
|
|
|
|
zxAnInterfaceEthPerfMib MODULE-IDENTITY
|
|
LAST-UPDATED "201109132000Z"
|
|
ORGANIZATION "ZTE Corporation"
|
|
CONTACT-INFO " Zhang Weiping ZTE Corporation
|
|
Mail: zhang.weiping@zte.com.cn
|
|
Tel : 021-68896470"
|
|
DESCRIPTION "The MIB module for the Performance Management of ZTE
|
|
Access Node interface."
|
|
|
|
REVISION "201109132000Z"
|
|
DESCRIPTION
|
|
"Modify this mib according to standard."
|
|
|
|
REVISION "201109101600Z"
|
|
DESCRIPTION
|
|
"Modify the description."
|
|
|
|
REVISION "201107021400Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= {zxAnInterfaceMib 12}
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Following management objects are defined.
|
|
-- 1. zxAnEthIfCurr15MinPerfTable
|
|
-- 2. zxAnEthIfCurr1DayPerfTable
|
|
-- 3. zxAnEthIfHis15MinPerfTable
|
|
-- 4. zxAnEthIfHis1DayPerfTable
|
|
-- 5. zxAnEthIfAlmProfileConfTable
|
|
-- 6. zxAnEthIfAlmProfileApplyTable
|
|
-- 7. zxAnEthIfAlmProfileTable
|
|
-- Following conformance information is defined.
|
|
-- 31. zxAnEthIfPerfConformance
|
|
--------------------------------------------------------------------------------
|
|
zxAnEthIfPerfObjects OBJECT IDENTIFIER ::= { zxAnInterfaceEthPerfMib 2 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 1. zxAnEthIfCurr15MinPerfTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnEthIfCurr15MinPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEthIfCurr15MinPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data table of the ethernet
|
|
interfaces."
|
|
::= { zxAnEthIfPerfObjects 2 }
|
|
|
|
zxAnEthIfCurr15MinPerfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEthIfCurr15MinPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data entry of the ethernet
|
|
interfaces."
|
|
INDEX { ifIndex}
|
|
::= { zxAnEthIfCurr15MinPerfTable 1 }
|
|
|
|
ZxAnEthIfCurr15MinPerfEntry ::= SEQUENCE {
|
|
zxAnEthIfC15MTimeElapsed Gauge32,
|
|
zxAnEthIfC15MInOctets Counter64,
|
|
zxAnEthIfC15MInPkts Counter64,
|
|
zxAnEthIfC15MInUcastPkts Counter64,
|
|
zxAnEthIfC15MInMcastPkts Counter64,
|
|
zxAnEthIfC15MInBcastPkts Counter64,
|
|
zxAnEthIfC15MInOversizedPkts Counter64,
|
|
zxAnEthIfC15MInUndersizedPkts Counter64,
|
|
zxAnEthIfC15MOutOctets Counter64,
|
|
zxAnEthIfC15MOutPkts Counter64,
|
|
zxAnEthIfC15MOutUcastPkts Counter64,
|
|
zxAnEthIfC15MOutMcastPkts Counter64,
|
|
zxAnEthIfC15MOutBcastPkts Counter64,
|
|
zxAnEthIfC15MOutPausePkts Counter64,
|
|
zxAnEthIfC15MOutDiscardPkts Counter64,
|
|
zxAnEthIfC15MOutCollisions Counter64,
|
|
zxAnEthIfC15MSingleCollisions Counter64,
|
|
zxAnEthIfC15MMultipleCollisions Counter64,
|
|
zxAnEthIfC15MFcsErrors Counter64,
|
|
zxAnEthIfC15MAlignmentErrors Counter64,
|
|
zxAnEthIfC15MReset INTEGER
|
|
}
|
|
|
|
zxAnEthIfC15MTimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge32(0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the beginning of the
|
|
current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 1 }
|
|
|
|
zxAnEthIfC15MInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 2 }
|
|
|
|
zxAnEthIfC15MInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received on the interface,
|
|
including framing characters in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 3 }
|
|
|
|
zxAnEthIfC15MInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were not addressed to a multicast
|
|
or broadcast address at this sub-layer in current 15 minutes
|
|
interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 4 }
|
|
|
|
zxAnEthIfC15MInMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a multicast
|
|
address at this sub-layer in current 15 minutes interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 5 }
|
|
|
|
zxAnEthIfC15MInBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a broadcast
|
|
address at this sub-layer in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 6 }
|
|
|
|
zxAnEthIfC15MInOversizedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets,whick above the configured MTU-size,
|
|
e.g.mtu = 2000 (frames >2000 are discarded) in current 15
|
|
minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 7 }
|
|
|
|
zxAnEthIfC15MInUndersizedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets,whick above the min port size,
|
|
the value is 64 in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 8 }
|
|
|
|
zxAnEthIfC15MOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the interface,
|
|
including framing characters in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 9 }
|
|
|
|
zxAnEthIfC15MOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets transmitted out of the interface,
|
|
including framing characters in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 10 }
|
|
|
|
zxAnEthIfC15MOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were not addressed to a
|
|
multicast or broadcast address at this sub-layer, including
|
|
those that were discarded or not sent in current 15 minutes
|
|
interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 11 }
|
|
|
|
zxAnEthIfC15MOutMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
multicast address at this sub-layer, including those that
|
|
were discarded or not sent in current 15 minutes interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 12 }
|
|
|
|
zxAnEthIfC15MOutBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
broadcast address at this sub-layer, including those that
|
|
were discarded or not sent in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 13 }
|
|
|
|
zxAnEthIfC15MOutPausePkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of MAC Control frames transmitted on
|
|
this interface with an opcode indicating the
|
|
PAUSE operation in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 14 }
|
|
|
|
zxAnEthIfC15MOutDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outbound packets which were chosen to be
|
|
discarded even though no errors had been detected to prevent
|
|
their being transmitted in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 15 }
|
|
|
|
zxAnEthIfC15MOutCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in out collision and
|
|
are subsequently transmitted successfully in current 15
|
|
minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 16 }
|
|
|
|
zxAnEthIfC15MSingleCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in a single
|
|
collision, and are subsequently transmitted
|
|
successfully in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 17 }
|
|
|
|
zxAnEthIfC15MMultipleCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in more
|
|
than one collision and are subsequently
|
|
transmitted successfully in current 15 minutes
|
|
interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 18 }
|
|
|
|
zxAnEthIfC15MFcsErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received on a particular
|
|
interface that are an integral number of octets
|
|
in length but do not pass the FCS check. This
|
|
count does not include frames received with
|
|
frame-too-long or frame-too-short error in current
|
|
15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 19 }
|
|
|
|
zxAnEthIfC15MAlignmentErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received on a particular
|
|
interface that are not an integral number of
|
|
octets in length and do not pass the FCS check
|
|
in current 15 minutes interval."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 20 }
|
|
|
|
zxAnEthIfC15MReset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
perfReset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear all the current 15 minutes performance variables.
|
|
When get this variable, always return 1."
|
|
::= { zxAnEthIfCurr15MinPerfEntry 100 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 2. zxAnEthIfCurr1DayPerfTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnEthIfCurr1DayPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEthIfCurr1DayPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data table of the ethernet
|
|
interfaces."
|
|
::= { zxAnEthIfPerfObjects 3 }
|
|
|
|
zxAnEthIfCurr1DayPerfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEthIfCurr1DayPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data entry of the ethernet
|
|
interfaces."
|
|
INDEX { ifIndex}
|
|
::= { zxAnEthIfCurr1DayPerfTable 1 }
|
|
|
|
ZxAnEthIfCurr1DayPerfEntry ::= SEQUENCE {
|
|
zxAnEthIfC1DTimeElapsed Gauge32,
|
|
zxAnEthIfC1DInOctets Counter64,
|
|
zxAnEthIfC1DInPkts Counter64,
|
|
zxAnEthIfC1DInUcastPkts Counter64,
|
|
zxAnEthIfC1DInMcastPkts Counter64,
|
|
zxAnEthIfC1DInBcastPkts Counter64,
|
|
zxAnEthIfC1DInOversizedPkts Counter64,
|
|
zxAnEthIfC1DInUndersizedPkts Counter64,
|
|
zxAnEthIfC1DOutOctets Counter64,
|
|
zxAnEthIfC1DOutPkts Counter64,
|
|
zxAnEthIfC1DOutUcastPkts Counter64,
|
|
zxAnEthIfC1DOutMcastPkts Counter64,
|
|
zxAnEthIfC1DOutBcastPkts Counter64,
|
|
zxAnEthIfC1DOutPausePkts Counter64,
|
|
zxAnEthIfC1DOutDiscardPkts Counter64,
|
|
zxAnEthIfC1DOutCollisions Counter64,
|
|
zxAnEthIfC1DSingleCollisions Counter64,
|
|
zxAnEthIfC1DMultipleCollisions Counter64,
|
|
zxAnEthIfC1DFcsErrors Counter64,
|
|
zxAnEthIfC1DAlignmentErrors Counter64,
|
|
zxAnEthIfC1DReset INTEGER
|
|
}
|
|
|
|
zxAnEthIfC1DTimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge32(0..86399)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the beginning of the
|
|
current 1 day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 1 }
|
|
|
|
zxAnEthIfC1DInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 2 }
|
|
|
|
zxAnEthIfC1DInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received on the interface,
|
|
including framing characters in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 3 }
|
|
|
|
zxAnEthIfC1DInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were not addressed to a multicast
|
|
or broadcast address at this sub-layer in current one day
|
|
interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 4 }
|
|
|
|
zxAnEthIfC1DInMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a multicast
|
|
address at this sub-layer in current one day interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 5 }
|
|
|
|
zxAnEthIfC1DInBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a broadcast
|
|
address at this sub-layer in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 6 }
|
|
|
|
zxAnEthIfC1DInOversizedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets,whick above the configured MTU-size,
|
|
e.g.mtu = 2000 (frames >2000 are discarded) in current one
|
|
day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 7 }
|
|
|
|
zxAnEthIfC1DInUndersizedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets,whick above the min port size,
|
|
the value is 64 in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 8 }
|
|
|
|
zxAnEthIfC1DOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the interface,
|
|
including framing characters in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 9 }
|
|
|
|
zxAnEthIfC1DOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets transmitted out of the interface,
|
|
including framing characters in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 10 }
|
|
|
|
zxAnEthIfC1DOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were not addressed to a
|
|
multicast or broadcast address at this sub-layer, including
|
|
those that were discarded or not sent in current one day
|
|
interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 11 }
|
|
|
|
zxAnEthIfC1DOutMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
multicast address at this sub-layer, including those that
|
|
were discarded or not sent in current one day interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 12 }
|
|
|
|
zxAnEthIfC1DOutBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
broadcast address at this sub-layer, including those that
|
|
were discarded or not sent in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 13 }
|
|
|
|
zxAnEthIfC1DOutPausePkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of MAC Control frames transmitted on
|
|
this interface with an opcode indicating the
|
|
PAUSE operation in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 14 }
|
|
|
|
zxAnEthIfC1DOutDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outbound packets which were chosen to be
|
|
discarded even though no errors had been detected to prevent
|
|
their being transmitted in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 15 }
|
|
|
|
zxAnEthIfC1DOutCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in out collision and
|
|
are subsequently transmitted successfully in current one
|
|
day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 16 }
|
|
|
|
zxAnEthIfC1DSingleCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in a single
|
|
collision, and are subsequently transmitted
|
|
successfully in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 17 }
|
|
|
|
zxAnEthIfC1DMultipleCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in more
|
|
than one collision and are subsequently
|
|
transmitted successfully in current one day
|
|
interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 18 }
|
|
|
|
zxAnEthIfC1DFcsErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received on a particular
|
|
interface that are an integral number of octets
|
|
in length but do not pass the FCS check. This
|
|
count does not include frames received with
|
|
frame-too-long or frame-too-short error in current
|
|
one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 19 }
|
|
|
|
zxAnEthIfC1DAlignmentErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received on a particular
|
|
interface that are not an integral number of
|
|
octets in length and do not pass the FCS check
|
|
in current one day interval."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 20 }
|
|
|
|
zxAnEthIfC1DReset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
perfReset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear all the current 1 day performance variables.
|
|
When get this variable, always return 1."
|
|
::= { zxAnEthIfCurr1DayPerfEntry 100 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 3. zxAnEthIfHis15MinPerfTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnEthIfHis15MinPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEthIfHis15MinPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval history performance data table of the
|
|
ethernet interfaces."
|
|
::= { zxAnEthIfPerfObjects 4 }
|
|
|
|
zxAnEthIfHis15MinPerfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEthIfHis15MinPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data entry of the ethernet
|
|
interfaces."
|
|
INDEX { ifIndex, zxAnEthIfH15MIntervalNo }
|
|
::= { zxAnEthIfHis15MinPerfTable 1 }
|
|
|
|
ZxAnEthIfHis15MinPerfEntry ::= SEQUENCE {
|
|
zxAnEthIfH15MIntervalNo Integer32,
|
|
zxAnEthIfH15MIntervalValidData TruthValue,
|
|
zxAnEthIfH15MDateTime DateAndTime,
|
|
zxAnEthIfH15MInOctets Counter64,
|
|
zxAnEthIfH15MInPkts Counter64,
|
|
zxAnEthIfH15MInUcastPkts Counter64,
|
|
zxAnEthIfH15MInMcastPkts Counter64,
|
|
zxAnEthIfH15MInBcastPkts Counter64,
|
|
zxAnEthIfH15MInOversizedPkts Counter64,
|
|
zxAnEthIfH15MInUndersizedPkts Counter64,
|
|
zxAnEthIfH15MOutOctets Counter64,
|
|
zxAnEthIfH15MOutPkts Counter64,
|
|
zxAnEthIfH15MOutUcastPkts Counter64,
|
|
zxAnEthIfH15MOutMcastPkts Counter64,
|
|
zxAnEthIfH15MOutBcastPkts Counter64,
|
|
zxAnEthIfH15MOutPausePkts Counter64,
|
|
zxAnEthIfH15MOutDiscardPkts Counter64,
|
|
zxAnEthIfH15MOutCollisions Counter64,
|
|
zxAnEthIfH15MSingleCollisions Counter64,
|
|
zxAnEthIfH15MMultipleCollisions Counter64,
|
|
zxAnEthIfH15MFcsErrors Counter64,
|
|
zxAnEthIfH15MAlignmentErrors Counter64
|
|
}
|
|
|
|
zxAnEthIfH15MIntervalNo OBJECT-TYPE
|
|
SYNTAX Integer32(1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data interval number 1 is the the most recent
|
|
previous interval; interval 96 is 24 hours ago.
|
|
Intervals 2..96 are optional."
|
|
::= { zxAnEthIfHis15MinPerfEntry 1 }
|
|
|
|
zxAnEthIfH15MIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data valid flag.
|
|
true(1) means valid.
|
|
false(2) means invalidm and the performace data is useless."
|
|
::= { zxAnEthIfHis15MinPerfEntry 2 }
|
|
|
|
zxAnEthIfH15MDateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data generation time."
|
|
::= { zxAnEthIfHis15MinPerfEntry 3 }
|
|
|
|
zxAnEthIfH15MInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 4 }
|
|
|
|
zxAnEthIfH15MInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received on the interface,
|
|
including framing characters in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 5 }
|
|
|
|
zxAnEthIfH15MInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were not addressed to a multicast
|
|
or broadcast address at this sub-layer in historical 15 minutes
|
|
interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 6 }
|
|
|
|
zxAnEthIfH15MInMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a multicast
|
|
address at this sub-layer in historical 15 minutes interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnEthIfHis15MinPerfEntry 7 }
|
|
|
|
zxAnEthIfH15MInBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a broadcast
|
|
address at this sub-layer in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 8 }
|
|
|
|
zxAnEthIfH15MInOversizedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets,whick above the configured MTU-size,
|
|
e.g.mtu = 2000 (frames >2000 are discarded) in historical 15
|
|
minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 9 }
|
|
|
|
zxAnEthIfH15MInUndersizedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets,whick above the min port size,
|
|
the value is 64 in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 10 }
|
|
|
|
zxAnEthIfH15MOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the interface,
|
|
including framing characters in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 11 }
|
|
|
|
zxAnEthIfH15MOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets transmitted out of the interface,
|
|
including framing characters in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 12 }
|
|
|
|
zxAnEthIfH15MOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were not addressed to a
|
|
multicast or broadcast address at this sub-layer, including
|
|
those that were discarded or not sent in historical 15 minutes
|
|
interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 13 }
|
|
|
|
zxAnEthIfH15MOutMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
multicast address at this sub-layer, including those that
|
|
were discarded or not sent in historical 15 minutes interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnEthIfHis15MinPerfEntry 14 }
|
|
|
|
zxAnEthIfH15MOutBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
broadcast address at this sub-layer, including those that
|
|
were discarded or not sent in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 15 }
|
|
|
|
zxAnEthIfH15MOutPausePkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of MAC Control frames transmitted on
|
|
this interface with an opcode indicating the
|
|
PAUSE operation in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 16 }
|
|
|
|
zxAnEthIfH15MOutDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outbound packets which were chosen to be
|
|
discarded even though no errors had been detected to prevent
|
|
their being transmitted in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 17 }
|
|
|
|
zxAnEthIfH15MOutCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in out collision and
|
|
are subsequently transmitted successfully in historical 15
|
|
minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 18 }
|
|
|
|
zxAnEthIfH15MSingleCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in a single
|
|
collision, and are subsequently transmitted
|
|
successfully in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 19 }
|
|
|
|
zxAnEthIfH15MMultipleCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in more
|
|
than one collision and are subsequently
|
|
transmitted successfully in historical 15 minutes
|
|
interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 20 }
|
|
|
|
zxAnEthIfH15MFcsErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received on a particular
|
|
interface that are an integral number of octets
|
|
in length but do not pass the FCS check. This
|
|
count does not include frames received with
|
|
frame-too-long or frame-too-short error in historical
|
|
15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 21 }
|
|
|
|
zxAnEthIfH15MAlignmentErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received on a particular
|
|
interface that are not an integral number of
|
|
octets in length and do not pass the FCS check
|
|
in historical 15 minutes interval."
|
|
::= { zxAnEthIfHis15MinPerfEntry 22 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 4. zxAnEthIfHis1DayPerfTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnEthIfHis1DayPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEthIfHis1DayPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval history performance data table of the ethernet
|
|
interfaces."
|
|
::= { zxAnEthIfPerfObjects 5 }
|
|
|
|
zxAnEthIfHis1DayPerfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEthIfHis1DayPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data entry of the ethernet
|
|
interfaces."
|
|
INDEX { ifIndex, zxAnEthIfH1DIntervalNo }
|
|
::= { zxAnEthIfHis1DayPerfTable 1 }
|
|
|
|
ZxAnEthIfHis1DayPerfEntry ::= SEQUENCE {
|
|
zxAnEthIfH1DIntervalNo Integer32,
|
|
zxAnEthIfH1DIntervalValidData TruthValue,
|
|
zxAnEthIfH1DDateTime DateAndTime,
|
|
zxAnEthIfH1DInOctets Counter64,
|
|
zxAnEthIfH1DInPkts Counter64,
|
|
zxAnEthIfH1DInUcastPkts Counter64,
|
|
zxAnEthIfH1DInMcastPkts Counter64,
|
|
zxAnEthIfH1DInBcastPkts Counter64,
|
|
zxAnEthIfH1DInOversizedPkts Counter64,
|
|
zxAnEthIfH1DInUndersizedPkts Counter64,
|
|
zxAnEthIfH1DOutOctets Counter64,
|
|
zxAnEthIfH1DOutPkts Counter64,
|
|
zxAnEthIfH1DOutUcastPkts Counter64,
|
|
zxAnEthIfH1DOutMcastPkts Counter64,
|
|
zxAnEthIfH1DOutBcastPkts Counter64,
|
|
zxAnEthIfH1DOutPausePkts Counter64,
|
|
zxAnEthIfH1DOutDiscardPkts Counter64,
|
|
zxAnEthIfH1DOutCollisions Counter64,
|
|
zxAnEthIfH1DSingleCollisions Counter64,
|
|
zxAnEthIfH1DMultipleCollisions Counter64,
|
|
zxAnEthIfH1DFcsErrors Counter64,
|
|
zxAnEthIfH1DAlignmentErrors Counter64
|
|
}
|
|
|
|
zxAnEthIfH1DIntervalNo OBJECT-TYPE
|
|
SYNTAX Integer32(1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data interval number 1 is the the most recent
|
|
previous interval; interval 7 is 1 week ago.
|
|
Intervals 2..7 are optional."
|
|
::= { zxAnEthIfHis1DayPerfEntry 1 }
|
|
|
|
zxAnEthIfH1DIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data valid flag.
|
|
true(1) means valid.
|
|
false(2) means invalidm and the performace data is useless."
|
|
::= { zxAnEthIfHis1DayPerfEntry 2 }
|
|
|
|
zxAnEthIfH1DDateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data generation time."
|
|
::= { zxAnEthIfHis1DayPerfEntry 3 }
|
|
|
|
zxAnEthIfH1DInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 4 }
|
|
|
|
zxAnEthIfH1DInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received on the interface,
|
|
including framing characters in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 5 }
|
|
|
|
zxAnEthIfH1DInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were not addressed to a multicast
|
|
or broadcast address at this sub-layer in historical one day
|
|
interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 6 }
|
|
|
|
zxAnEthIfH1DInMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a multicast
|
|
address at this sub-layer in historical one day interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnEthIfHis1DayPerfEntry 7 }
|
|
|
|
zxAnEthIfH1DInBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a broadcast
|
|
address at this sub-layer in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 8 }
|
|
|
|
zxAnEthIfH1DInOversizedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets,whick above the configured MTU-size,
|
|
e.g.mtu = 2000 (frames >2000 are discarded) in current one
|
|
day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 9 }
|
|
|
|
zxAnEthIfH1DInUndersizedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets,whick above the min port size,
|
|
the value is 64 in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 10 }
|
|
|
|
zxAnEthIfH1DOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the interface,
|
|
including framing characters in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 11 }
|
|
|
|
zxAnEthIfH1DOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets transmitted out of the interface,
|
|
including framing characters in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 12 }
|
|
|
|
zxAnEthIfH1DOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were not addressed to a
|
|
multicast or broadcast address at this sub-layer, including
|
|
those that were discarded or not sent in historical one day
|
|
interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 13 }
|
|
|
|
zxAnEthIfH1DOutMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
multicast address at this sub-layer, including those that
|
|
were discarded or not sent in historical one day interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnEthIfHis1DayPerfEntry 14 }
|
|
|
|
zxAnEthIfH1DOutBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
broadcast address at this sub-layer, including those that
|
|
were discarded or not sent in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 15 }
|
|
|
|
zxAnEthIfH1DOutPausePkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of MAC Control frames transmitted on
|
|
this interface with an opcode indicating the
|
|
PAUSE operation in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 16 }
|
|
|
|
zxAnEthIfH1DOutDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outbound packets which were chosen to be
|
|
discarded even though no errors had been detected to prevent
|
|
their being transmitted in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 17 }
|
|
|
|
zxAnEthIfH1DOutCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in out collision and
|
|
are subsequently transmitted successfully in historical one
|
|
day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 18 }
|
|
|
|
zxAnEthIfH1DSingleCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in a single
|
|
collision, and are subsequently transmitted
|
|
successfully in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 19 }
|
|
|
|
zxAnEthIfH1DMultipleCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames that are involved in more
|
|
than one collision and are subsequently
|
|
transmitted successfully in historical one day
|
|
interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 20 }
|
|
|
|
zxAnEthIfH1DFcsErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received on a particular
|
|
interface that are an integral number of octets
|
|
in length but do not pass the FCS check. This
|
|
count does not include frames received with
|
|
frame-too-long or frame-too-short error in historical
|
|
one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 21 }
|
|
|
|
zxAnEthIfH1DAlignmentErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received on a particular
|
|
interface that are not an integral number of
|
|
octets in length and do not pass the FCS check
|
|
in historical one day interval."
|
|
::= { zxAnEthIfHis1DayPerfEntry 22 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 5. zxAnEthIfAlmProfileConfTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnEthIfAlmProfileConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEthIfAlmProfileConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile table of the ethernet
|
|
interfaces."
|
|
::= { zxAnEthIfPerfObjects 6 }
|
|
|
|
zxAnEthIfAlmProfileConfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEthIfAlmProfileConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile entry of the ethernet
|
|
interfaces.These variables in the profile configuration is optional,
|
|
if not configured, it means the correspongding alarm is not
|
|
reported, but the alarm and clear alarm threshold configuration is
|
|
needed to bind."
|
|
INDEX { zxAnEthIfAlmProfileName, zxAnEthIfPerfVariable }
|
|
::= { zxAnEthIfAlmProfileConfTable 1 }
|
|
|
|
ZxAnEthIfAlmProfileConfEntry ::= SEQUENCE {
|
|
zxAnEthIfAlmProfileName DisplayString,
|
|
zxAnEthIfPerfVariable OBJECT IDENTIFIER,
|
|
zxAnEthIfRiseAlmThresh HCPerfCurrentCount,
|
|
zxAnEthIfClrRiseAlmThresh HCPerfCurrentCount,
|
|
zxAnEthIfRiseWarnThresh HCPerfCurrentCount,
|
|
zxAnEthIfClrRiseWarnThresh HCPerfCurrentCount,
|
|
zxAnEthIfFallWarnThresh HCPerfCurrentCount,
|
|
zxAnEthIfClrFallWarnThresh HCPerfCurrentCount,
|
|
zxAnEthIfFallAlmThresh HCPerfCurrentCount,
|
|
zxAnEthIfClrFallAlmThresh HCPerfCurrentCount,
|
|
zxAnEthIfThreshUsed BITS,
|
|
zxAnEthIfAlmProfileConfRowStatus RowStatus
|
|
}
|
|
|
|
zxAnEthIfAlmProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The profile name."
|
|
::= { zxAnEthIfAlmProfileConfEntry 1 }
|
|
|
|
zxAnEthIfPerfVariable OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of performance variables."
|
|
::= { zxAnEthIfAlmProfileConfEntry 2 }
|
|
|
|
zxAnEthIfRiseAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising alarm."
|
|
::= { zxAnEthIfAlmProfileConfEntry 3 }
|
|
|
|
zxAnEthIfClrRiseAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising alarm restore."
|
|
::= { zxAnEthIfAlmProfileConfEntry 4 }
|
|
|
|
zxAnEthIfRiseWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising warning."
|
|
::= { zxAnEthIfAlmProfileConfEntry 5 }
|
|
|
|
zxAnEthIfClrRiseWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising warning restore."
|
|
::= { zxAnEthIfAlmProfileConfEntry 6 }
|
|
|
|
zxAnEthIfFallWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling warning."
|
|
::= { zxAnEthIfAlmProfileConfEntry 7 }
|
|
|
|
zxAnEthIfClrFallWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling warning restore."
|
|
::= { zxAnEthIfAlmProfileConfEntry 8 }
|
|
|
|
zxAnEthIfFallAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling alarm."
|
|
::= { zxAnEthIfAlmProfileConfEntry 9 }
|
|
|
|
zxAnEthIfClrFallAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling alarm restore."
|
|
::= { zxAnEthIfAlmProfileConfEntry 10 }
|
|
|
|
zxAnEthIfThreshUsed OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
riseAlmThresh(0),
|
|
riseAlmClrThresh(1),
|
|
riseWarnThresh(2),
|
|
riseWarnClrThresh(3),
|
|
fallWarnThresh(4),
|
|
fallWarnClrThresh(5),
|
|
fallAlmThresh(6),
|
|
fallAlmClrThresh(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold used flag."
|
|
::= { zxAnEthIfAlmProfileConfEntry 11 }
|
|
|
|
zxAnEthIfAlmProfileConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row.
|
|
|
|
To create a row in this table, a manager must
|
|
set this object to createAndGo(4).
|
|
|
|
To delete a row in this table, a manager must
|
|
set this object to destroy(6). "
|
|
::= { zxAnEthIfAlmProfileConfEntry 50 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 6. zxAnEthIfAlmProfileApplyTable
|
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnEthIfAlmProfileApplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEthIfAlmProfileApplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile configuration table of
|
|
the ethernet interfaces."
|
|
::= { zxAnEthIfPerfObjects 7 }
|
|
|
|
zxAnEthIfAlmProfileApplyEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEthIfAlmProfileApplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile configuration entry of
|
|
the ethernet interfaces."
|
|
INDEX { ifIndex }
|
|
::= { zxAnEthIfAlmProfileApplyTable 1 }
|
|
|
|
ZxAnEthIfAlmProfileApplyEntry ::= SEQUENCE {
|
|
zxAnEthIfAlmPrf DisplayString,
|
|
zxAnEthIfAlmPrfApplyRowStatus RowStatus
|
|
}
|
|
|
|
zxAnEthIfAlmPrf OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile."
|
|
::= { zxAnEthIfAlmProfileApplyEntry 1 }
|
|
|
|
zxAnEthIfAlmPrfApplyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row.
|
|
|
|
To create a row in this table, a manager must
|
|
set this object to createAndGo(4).
|
|
|
|
To delete a row in this table, a manager must
|
|
set this object to destroy(6). "
|
|
::= { zxAnEthIfAlmProfileApplyEntry 50 }
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 7. zxAnEthIfAlmProfileTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnEthIfAlmProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnEthIfAlmProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile table of the ethernet
|
|
interfaces.It can be used to delete all of the performance alarm
|
|
threshold profiles which has the same name configured in
|
|
'zxAnEthIfAlmProfileConfTable'."
|
|
::= { zxAnEthIfPerfObjects 8 }
|
|
|
|
zxAnEthIfAlmProfileEntry OBJECT-TYPE
|
|
SYNTAX ZxAnEthIfAlmProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile entry of the ethernet
|
|
interfaces."
|
|
INDEX { zxAnEthIfAlmProfileName}
|
|
::= { zxAnEthIfAlmProfileTable 1 }
|
|
|
|
ZxAnEthIfAlmProfileEntry ::= SEQUENCE {
|
|
zxAnEthIfAlmProfileRowStatus RowStatus
|
|
}
|
|
|
|
zxAnEthIfAlmProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this profile.
|
|
|
|
To create a profile in this table, a manager must
|
|
set this object to createAndGo(4).
|
|
|
|
To delete a profile in this table, a manager must
|
|
set this object to destroy(6). "
|
|
::= { zxAnEthIfAlmProfileEntry 50 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 31. zxAnEthIfPerfConformance
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnEthIfPerfConformance OBJECT IDENTIFIER
|
|
::= { zxAnInterfaceEthPerfMib 4 }
|
|
|
|
zxAnEthIfPerfCompliances OBJECT IDENTIFIER
|
|
::= { zxAnEthIfPerfConformance 1 }
|
|
zxAnEthIfPerfGroups OBJECT IDENTIFIER
|
|
::= { zxAnEthIfPerfConformance 2 }
|
|
|
|
zxAnEthIfPerfCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
ZTE-AN-INTERFACE-ETH-PERF-MIB."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
zxAnEthIfPerfCurr15MinGroup,
|
|
zxAnEthIfPerfCurr1DayGroup,
|
|
zxAnEthIfPerfHis15MinGroup,
|
|
zxAnEthIfPerfHis1DayGroup,
|
|
zxAnEthIfPerfAlmProfileGroup,
|
|
zxAnEthIfAlmProfileApplyGroup,
|
|
zxAnEthIfAlmProfileGroup
|
|
}
|
|
::= { zxAnEthIfPerfCompliances 1 }
|
|
|
|
-- Units of compliance
|
|
|
|
zxAnEthIfPerfCurr15MinGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnEthIfC15MTimeElapsed,
|
|
zxAnEthIfC15MInOctets,
|
|
zxAnEthIfC15MInPkts,
|
|
zxAnEthIfC15MInUcastPkts,
|
|
zxAnEthIfC15MInMcastPkts,
|
|
zxAnEthIfC15MInBcastPkts,
|
|
zxAnEthIfC15MInOversizedPkts,
|
|
zxAnEthIfC15MInUndersizedPkts,
|
|
zxAnEthIfC15MOutOctets,
|
|
zxAnEthIfC15MOutPkts,
|
|
zxAnEthIfC15MOutUcastPkts,
|
|
zxAnEthIfC15MOutMcastPkts,
|
|
zxAnEthIfC15MOutBcastPkts,
|
|
zxAnEthIfC15MOutPausePkts,
|
|
zxAnEthIfC15MOutCollisions,
|
|
zxAnEthIfC15MOutDiscardPkts,
|
|
zxAnEthIfC15MSingleCollisions,
|
|
zxAnEthIfC15MMultipleCollisions,
|
|
zxAnEthIfC15MFcsErrors,
|
|
zxAnEthIfC15MAlignmentErrors,
|
|
zxAnEthIfC15MReset
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing for 15 minutes interval
|
|
performance data of interfaces."
|
|
::= { zxAnEthIfPerfGroups 1 }
|
|
|
|
zxAnEthIfPerfCurr1DayGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnEthIfC1DTimeElapsed,
|
|
zxAnEthIfC1DInOctets,
|
|
zxAnEthIfC1DInPkts,
|
|
zxAnEthIfC1DInUcastPkts,
|
|
zxAnEthIfC1DInMcastPkts,
|
|
zxAnEthIfC1DInBcastPkts,
|
|
zxAnEthIfC1DInOversizedPkts,
|
|
zxAnEthIfC1DInUndersizedPkts,
|
|
zxAnEthIfC1DOutOctets,
|
|
zxAnEthIfC1DOutPkts,
|
|
zxAnEthIfC1DOutUcastPkts,
|
|
zxAnEthIfC1DOutMcastPkts,
|
|
zxAnEthIfC1DOutBcastPkts,
|
|
zxAnEthIfC1DOutPausePkts,
|
|
zxAnEthIfC1DOutCollisions,
|
|
zxAnEthIfC1DOutDiscardPkts,
|
|
zxAnEthIfC1DSingleCollisions,
|
|
zxAnEthIfC1DMultipleCollisions,
|
|
zxAnEthIfC1DFcsErrors,
|
|
zxAnEthIfC1DAlignmentErrors,
|
|
zxAnEthIfC1DReset
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing 1 day interval performance data
|
|
of interfaces."
|
|
::= { zxAnEthIfPerfGroups 2 }
|
|
|
|
zxAnEthIfPerfHis15MinGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnEthIfH15MIntervalValidData,
|
|
zxAnEthIfH15MDateTime,
|
|
zxAnEthIfH15MInOctets,
|
|
zxAnEthIfH15MInPkts,
|
|
zxAnEthIfH15MInUcastPkts,
|
|
zxAnEthIfH15MInMcastPkts,
|
|
zxAnEthIfH15MInBcastPkts,
|
|
zxAnEthIfH15MInOversizedPkts,
|
|
zxAnEthIfH15MInUndersizedPkts,
|
|
zxAnEthIfH15MOutOctets,
|
|
zxAnEthIfH15MOutPkts,
|
|
zxAnEthIfH15MOutUcastPkts,
|
|
zxAnEthIfH15MOutMcastPkts,
|
|
zxAnEthIfH15MOutBcastPkts,
|
|
zxAnEthIfH15MOutPausePkts,
|
|
zxAnEthIfH15MOutCollisions,
|
|
zxAnEthIfH15MOutDiscardPkts,
|
|
zxAnEthIfH15MSingleCollisions,
|
|
zxAnEthIfH15MMultipleCollisions,
|
|
zxAnEthIfH15MFcsErrors,
|
|
zxAnEthIfH15MAlignmentErrors
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing for 15 minutes interval
|
|
performance data of interfaces."
|
|
::= { zxAnEthIfPerfGroups 3 }
|
|
|
|
zxAnEthIfPerfHis1DayGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnEthIfH1DIntervalValidData,
|
|
zxAnEthIfH1DDateTime,
|
|
zxAnEthIfH1DInOctets,
|
|
zxAnEthIfH1DInPkts,
|
|
zxAnEthIfH1DInUcastPkts,
|
|
zxAnEthIfH1DInMcastPkts,
|
|
zxAnEthIfH1DInBcastPkts,
|
|
zxAnEthIfH1DInOversizedPkts,
|
|
zxAnEthIfH1DInUndersizedPkts,
|
|
zxAnEthIfH1DOutOctets,
|
|
zxAnEthIfH1DOutPkts,
|
|
zxAnEthIfH1DOutUcastPkts,
|
|
zxAnEthIfH1DOutMcastPkts,
|
|
zxAnEthIfH1DOutBcastPkts,
|
|
zxAnEthIfH1DOutPausePkts,
|
|
zxAnEthIfH1DOutCollisions,
|
|
zxAnEthIfH1DOutDiscardPkts,
|
|
zxAnEthIfH1DSingleCollisions,
|
|
zxAnEthIfH1DMultipleCollisions,
|
|
zxAnEthIfH1DFcsErrors,
|
|
zxAnEthIfH1DAlignmentErrors
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing 1 day interval performance data
|
|
of interfaces."
|
|
::= { zxAnEthIfPerfGroups 4 }
|
|
|
|
zxAnEthIfPerfAlmProfileGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnEthIfRiseAlmThresh,
|
|
zxAnEthIfClrRiseAlmThresh,
|
|
zxAnEthIfRiseWarnThresh,
|
|
zxAnEthIfClrRiseWarnThresh,
|
|
zxAnEthIfFallWarnThresh,
|
|
zxAnEthIfClrFallWarnThresh,
|
|
zxAnEthIfFallAlmThresh,
|
|
zxAnEthIfClrFallAlmThresh,
|
|
zxAnEthIfThreshUsed,
|
|
zxAnEthIfAlmProfileConfRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing for performance alarm threshold
|
|
profile of interfaces."
|
|
::= { zxAnEthIfPerfGroups 5 }
|
|
|
|
zxAnEthIfAlmProfileApplyGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnEthIfAlmPrf,
|
|
zxAnEthIfAlmPrfApplyRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing for performance alarm threshold
|
|
profile apply control configuration information."
|
|
::= { zxAnEthIfPerfGroups 6 }
|
|
|
|
zxAnEthIfAlmProfileGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnEthIfAlmProfileRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing for performance alarm threshold
|
|
profile configuration information."
|
|
::= { zxAnEthIfPerfGroups 7 }
|
|
|
|
END |