636 lines
20 KiB
Plaintext
636 lines
20 KiB
Plaintext
|
|
--------------------------------------------------------------------------
|
|
-- File Name : ZTE-AN-IMA-MIB.mib
|
|
-- Date : 2007-7-10
|
|
-- Author : ZTE Nms dept.
|
|
|
|
--
|
|
-- Zte IMA Mib for DSL
|
|
--
|
|
--
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
ZTE-AN-IMA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI
|
|
RowStatus,DisplayString,TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
--ifIndex, ifAdminStatus,ifOperStatus,ifType FROM IF-MIB
|
|
ZxAnIfindex,ZxAnPortList,ZxAnIdList,zxAn FROM ZTE-AN-TC-MIB
|
|
|
|
;
|
|
|
|
|
|
zxAnImaMib MODULE-IDENTITY
|
|
LAST-UPDATED "200707101130Z"
|
|
ORGANIZATION "ZTE Corporation"
|
|
CONTACT-INFO "ZTE NMS dept.
|
|
Su Chunshan 68896292 "
|
|
DESCRIPTION "This MIB defines managed objects of AN IMA mgmt."
|
|
::= { zxAn 1005 }
|
|
|
|
|
|
|
|
zxAnImaObjects OBJECT IDENTIFIER ::= { zxAnImaMib 1 }
|
|
zxAnImaTrapObjects OBJECT IDENTIFIER ::= { zxAnImaMib 2 }
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Following objects are defined.
|
|
-- 1.IMA Group
|
|
-- 2.IMA Link
|
|
--------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
-- Textual conventions
|
|
ImaLinkState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of a link belonging to an IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.1.2 on page 48"
|
|
SYNTAX INTEGER
|
|
{
|
|
notInGroup(1),
|
|
unusableNoGivenReason(2),
|
|
unusableFault(3),
|
|
unusableMisconnected(4),
|
|
unusableInhibited(5),
|
|
unusableFailed(6),
|
|
usable(7),
|
|
active(8)
|
|
}
|
|
|
|
|
|
ImaGroupState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of the IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 10.2.1 on page 55"
|
|
SYNTAX INTEGER
|
|
{
|
|
notConfigured(1),
|
|
startUp(2),
|
|
startUpAck(3),
|
|
configAbortUnsupportedM(4),
|
|
configAbortIncompatibleSymmetry(5),
|
|
configAbortOther(6),
|
|
insufficientLinks(7),
|
|
blocked(8),
|
|
operational(9),
|
|
configAbortUnsupportedImaVersion(10)
|
|
}
|
|
|
|
|
|
ImaGroupTxClkMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the transmit clock mode of the IMA group.
|
|
There are two possible modes: the Common Transmit
|
|
Clock (CTC) and the Independent Transmit Clock (ITC).
|
|
The CTC mode corresponds to the case when the transmit clock
|
|
of all IMA links are derived from the same source. The ITC
|
|
configuration corresponds to the case where there is at least
|
|
one IMA link whose transmit clock is derived from a source
|
|
different than at least another link transmit clock."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 7 on page 38"
|
|
SYNTAX INTEGER
|
|
{
|
|
ctc(1),
|
|
itc(2)
|
|
}
|
|
|
|
ImaGroupSymmetry ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group symmetry mode adjusted during the group start-up."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.7 on page 35"
|
|
SYNTAX INTEGER
|
|
{
|
|
symmetricOperation(1),
|
|
asymmetricOperation(2),
|
|
asymmetricConfiguration(3)
|
|
}
|
|
|
|
ImaFrameLength ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length of the IMA frames."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.4.2 on page 34"
|
|
SYNTAX INTEGER
|
|
{
|
|
m32(32),
|
|
m64(64),
|
|
m128(128),
|
|
m256(256)
|
|
}
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 1.IMA Group
|
|
--------------------------------------------------------------------------------
|
|
zxAnImaGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnImaGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"xDslImaGroup interface table."
|
|
::= { zxAnImaObjects 1 }
|
|
|
|
|
|
zxAnImaGroupEntry OBJECT-TYPE
|
|
SYNTAX ZxAnImaGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ima Group interface create entry.It is used to create or remove a
|
|
ima goup interface.
|
|
|
|
NOTE:
|
|
zxAnImaLinkGroupIfIndex of zxAnImaLinkTable MUST be set before
|
|
creating a IMA group,because IMA group must include one link when it is
|
|
created.
|
|
So the IMA group creation procedure should be :
|
|
1.set zxAnImaLinkGroupIfIndex of zxAnImaLinkTable to the
|
|
zxAnImaGroupIfIndex to be created.
|
|
2.create the IMA group
|
|
"
|
|
INDEX { zxAnImaShelf,zxAnImaSlot,zxAnImaGroupIndex }
|
|
::= { zxAnImaGroupTable 1 }
|
|
|
|
ZxAnImaGroupEntry ::= SEQUENCE
|
|
{
|
|
zxAnImaShelf Integer32,
|
|
zxAnImaSlot Integer32,
|
|
zxAnImaGroupIndex INTEGER,
|
|
zxAnImaGroupConfImaVersion INTEGER,
|
|
zxAnImaGroupActualImaVersion INTEGER,
|
|
zxAnImaGroupSymmetry ImaGroupSymmetry,
|
|
zxAnImaGroupM2SClkMode INTEGER,
|
|
zxAnImaGroupNeTxClkMode ImaGroupTxClkMode,
|
|
zxAnImaGroupFeTxClkMode ImaGroupTxClkMode,
|
|
zxAnImaGroupTxFrameLength ImaFrameLength,
|
|
zxAnImaGroupRxFrameLength ImaFrameLength,
|
|
zxAnImaGroupAdminStatus INTEGER,
|
|
zxAnImaGroupOperstatus INTEGER, -- reserved
|
|
zxAnImaGroupNeState ImaGroupState,
|
|
zxAnImaGroupFeState ImaGroupState,
|
|
zxAnImaGroupDsx1LineType INTEGER,
|
|
zxAnImaGroupDsx1LineCoding INTEGER,
|
|
zxAnImaGroupDsx1TxClockSource INTEGER,
|
|
zxAnImaGroupDsx1IdleCells INTEGER,
|
|
zxAnImaGroupDsx1RxScrambling INTEGER,
|
|
zxAnImaGroupDsx1TxScrambling INTEGER,
|
|
zxAnImaGroupRowStatus RowStatus
|
|
}
|
|
|
|
zxAnImaShelf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shelf of IMA card."
|
|
::= { zxAnImaGroupEntry 1 }
|
|
|
|
|
|
zxAnImaSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slot of IMA card."
|
|
::= { zxAnImaGroupEntry 2 }
|
|
|
|
|
|
zxAnImaGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IMA Group Index in this IMA card."
|
|
::= { zxAnImaGroupEntry 3 }
|
|
|
|
|
|
zxAnImaGroupConfImaVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
version10(1),-- ima 1.0
|
|
version11(2) -- ima 1.1
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured version of Group,ima 1.0 or ima 1.1 ."
|
|
DEFVAL { version11 }
|
|
::= { zxAnImaGroupEntry 4 }
|
|
|
|
|
|
zxAnImaGroupActualImaVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
version10(1),-- ima 1.0
|
|
version11(2) -- ima 1.1
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual version of Group,ima 1.0 or ima 1.1 ."
|
|
::= { zxAnImaGroupEntry 5 }
|
|
|
|
zxAnImaGroupSymmetry OBJECT-TYPE
|
|
SYNTAX ImaGroupSymmetry
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Symmetry of the IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.7 on page 35"
|
|
DEFVAL { symmetricOperation }
|
|
::= { zxAnImaGroupEntry 6 }
|
|
|
|
zxAnImaGroupM2SClkMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
master(1),
|
|
slave(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock mode of master to slave for the Group "
|
|
DEFVAL { master }
|
|
::= { zxAnImaGroupEntry 7 }
|
|
|
|
|
|
zxAnImaGroupNeTxClkMode OBJECT-TYPE
|
|
SYNTAX ImaGroupTxClkMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit clocking mode used by the near-end IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 7 on page 38"
|
|
DEFVAL { ctc }
|
|
::= { zxAnImaGroupEntry 8 }
|
|
|
|
|
|
zxAnImaGroupFeTxClkMode OBJECT-TYPE
|
|
SYNTAX ImaGroupTxClkMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit clocking mode used by the far-end IMA group."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 7 on page 38"
|
|
::= { zxAnImaGroupEntry 9 }
|
|
|
|
|
|
zxAnImaGroupTxFrameLength OBJECT-TYPE
|
|
SYNTAX ImaFrameLength
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frame length to be used by the IMA group in the transmit
|
|
direction."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.4.2 on page 34"
|
|
DEFVAL { m128 }
|
|
::= { zxAnImaGroupEntry 10 }
|
|
|
|
|
|
zxAnImaGroupRxFrameLength OBJECT-TYPE
|
|
SYNTAX ImaFrameLength
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frame length to be used by the IMA group in the recieving
|
|
direction."
|
|
REFERENCE
|
|
"ATM Forum IMA v1.1, Section 5.2.2.4.2 on page 34"
|
|
::= { zxAnImaGroupEntry 11 }
|
|
|
|
|
|
zxAnImaGroupAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2),
|
|
reset(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administrative status of IMA group.
|
|
When it is set to reset(3),the agent should reset this IMA group
|
|
and then set it to its previous status. "
|
|
DEFVAL { up }
|
|
::= { zxAnImaGroupEntry 12 }
|
|
|
|
|
|
zxAnImaGroupOperstatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status of IMA group."
|
|
::= { zxAnImaGroupEntry 13 }
|
|
|
|
|
|
zxAnImaGroupNeState OBJECT-TYPE
|
|
SYNTAX ImaGroupState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the near-end IMA Group."
|
|
::= { zxAnImaGroupEntry 14 }
|
|
|
|
|
|
zxAnImaGroupFeState OBJECT-TYPE
|
|
SYNTAX ImaGroupState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the far-end IMA Group."
|
|
::= { zxAnImaGroupEntry 15 }
|
|
|
|
|
|
zxAnImaGroupDsx1LineType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
--other(1),
|
|
dsx1E1(4),
|
|
--dsx1E1CRC(5),
|
|
dsx1E1MF(6)
|
|
--dsx1E1CRCMF(7),
|
|
--dsx1E1Unframed(9),
|
|
--dsx1Unframed(8),
|
|
--dsx1ESF(2),
|
|
--dsx1D4(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the variety of E1 Line implementing
|
|
this circuit. The type of circuit affects the number of bits
|
|
per second that the circuit can reasonably carry, as well as
|
|
the interpretation of the usage and error statistics. This
|
|
variable is defined in the rfc1406 configuration table as
|
|
dsx1LineType.
|
|
|
|
According to rfc1406, the different values are:
|
|
dsx1ESF Extended SuperFrame DS1 (T1.107)
|
|
dsx1D4 AT&T D4 format DS1 (T1.107)
|
|
dsx1E1 ITU-T Recommendation G.704
|
|
(Table 4a)
|
|
dsx1E1-CRC ITU-T Recommendation G.704
|
|
(Table 4b)
|
|
dsxE1-MF G.704 (Table 4a) with TS16
|
|
multiframing enabled
|
|
dsx1E1-CRC-MF G.704 (Table 4b) with TS16
|
|
multiframing enabled
|
|
dsx1Unframed DS1 with No Framing
|
|
dsx1E1Unframed E1 with No Framing (G.703)"
|
|
::= { zxAnImaGroupEntry 16 }
|
|
|
|
zxAnImaGroupDsx1LineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
singleRail(1),
|
|
hdb3 (2),
|
|
b8zs (3),
|
|
ami(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable describes the variety of Zero Code suppression
|
|
used on this link, which in turn affects a number of its
|
|
characteristics. ami(4) refers to a mode wherein no zero
|
|
code suppression is present and the line encoding does not
|
|
solve the problem directly. In this application, the higher
|
|
layer must provide data which meets or exceeds the pulse
|
|
density re-quirements, such as inverting HDLC data. This
|
|
variable is defined in the rfc1406 configuration table as
|
|
dsx1LineCoding."
|
|
DEFVAL { hdb3 }
|
|
::= { zxAnImaGroupEntry 17 }
|
|
|
|
zxAnImaGroupDsx1TxClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
loopTiming(1),
|
|
localTiming(2)
|
|
--throughTiming(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source of the transmit clock. loopTiming(1) indicated that
|
|
the recovered receive clock is used as the transmit clock.
|
|
localTiming(2) indicates that a local source clock is used as
|
|
the transmit clock. To determine which local source clock is
|
|
used advise the ntGlobalClock in the netmodTimingTable for this
|
|
netmod (refer to the Fore-Switch-MIB for more information)."
|
|
DEFVAL { localTiming }
|
|
::= { zxAnImaGroupEntry 18 }
|
|
|
|
zxAnImaGroupDsx1IdleCells OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unassigned(1),
|
|
idle(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the types of cells that should be sent
|
|
in case there is no real data to send. According to the ATM
|
|
Forum, Unassigned cells should be sent (octet 1-3 are 0's,
|
|
octet 4 is 0000xxx0, where x is 'don't care'). According to the
|
|
CCITT specifications, Idle cells should be sent (everything is
|
|
'0' except for the CLP bit which is '1'). By default,
|
|
unassigned cells are transmitted is case there is no data to
|
|
send."
|
|
DEFVAL { unassigned }
|
|
::= { zxAnImaGroupEntry 19 }
|
|
|
|
|
|
zxAnImaGroupDsx1RxScrambling OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
descrambling(1),
|
|
noDescrambling(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the information is being
|
|
descrambled on receiving. It should be set the same as the
|
|
transmitting side."
|
|
DEFVAL { noDescrambling }
|
|
::= { zxAnImaGroupEntry 20 }
|
|
|
|
zxAnImaGroupDsx1TxScrambling OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
scrambling(1),
|
|
noScrambling(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the information (48 octet
|
|
payload) is being scrambled before transmitting. It should
|
|
be set the same as the receiving side."
|
|
DEFVAL { noScrambling }
|
|
::= { zxAnImaGroupEntry 21 }
|
|
|
|
|
|
zxAnImaGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create, delete the ima group interface
|
|
in this table."
|
|
::= { zxAnImaGroupEntry 22 }
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 2.IMA Link
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnImaLinkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnImaLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"xDsl zxAnImaLink interface table."
|
|
::= { zxAnImaObjects 2 }
|
|
|
|
|
|
zxAnImaLinkEntry OBJECT-TYPE
|
|
SYNTAX ZxAnImaLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ima link interface create entry.It is used to create or remove a
|
|
ima link interface."
|
|
|
|
INDEX { zxAnImaShelf,zxAnImaSlot,zxAnImaLinkId }
|
|
::= { zxAnImaLinkTable 1 }
|
|
|
|
ZxAnImaLinkEntry ::= SEQUENCE {
|
|
zxAnImaLinkId Integer32,
|
|
zxAnImaLinkGroupIndex Integer32,
|
|
zxAnImaLinkNeTxAdminStatus INTEGER,
|
|
zxAnImaLinkNeRxState ImaLinkState,
|
|
zxAnImaLinkNeTxState ImaLinkState,
|
|
zxAnImaLinkFeRxState ImaLinkState,
|
|
zxAnImaLinkFeTxState ImaLinkState,
|
|
zxAnImaLinkLoopback INTEGER
|
|
}
|
|
|
|
|
|
zxAnImaLinkId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for the IMA port on this card."
|
|
::= { zxAnImaLinkEntry 1 }
|
|
|
|
zxAnImaLinkGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMA group index that this link joined.If the link doesn't join
|
|
any ima group,this value is 255 (0xff). "
|
|
DEFVAL { 255 }
|
|
::= { zxAnImaLinkEntry 2 }
|
|
|
|
|
|
zxAnImaLinkNeTxAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of IMA link near-end transmission."
|
|
::= { zxAnImaLinkEntry 3 }
|
|
|
|
|
|
zxAnImaLinkNeRxState OBJECT-TYPE
|
|
SYNTAX ImaLinkState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the near-end receive link."
|
|
::= { zxAnImaLinkEntry 4 }
|
|
|
|
|
|
|
|
zxAnImaLinkNeTxState OBJECT-TYPE
|
|
SYNTAX ImaLinkState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the near-end transmit link."
|
|
::= { zxAnImaLinkEntry 5 }
|
|
|
|
|
|
|
|
zxAnImaLinkFeRxState OBJECT-TYPE
|
|
SYNTAX ImaLinkState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the far-end receive link."
|
|
::= { zxAnImaLinkEntry 6 }
|
|
|
|
|
|
|
|
zxAnImaLinkFeTxState OBJECT-TYPE
|
|
SYNTAX ImaLinkState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the far-end transmit link."
|
|
::= { zxAnImaLinkEntry 7 }
|
|
|
|
|
|
|
|
zxAnImaLinkLoopback OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loopback this link or not."
|
|
::= { zxAnImaLinkEntry 8 }
|
|
|
|
|
|
|
|
|
|
|
|
END
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|