1231 lines
44 KiB
Plaintext
1231 lines
44 KiB
Plaintext
|
|
--------------------------------------------------------------------------
|
|
-- File Name : ZTE-AN-CFM-MIB.mib
|
|
-- Date : 2010-01-28
|
|
-- Author : ZTE Nms dept.
|
|
|
|
--
|
|
-- Zte System Mgmt Mib for Access Node
|
|
--
|
|
--
|
|
--------------------------------------------------------------------------
|
|
|
|
ZTE-AN-CFM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, MODULE-IDENTITY,Integer32 ,Unsigned32 ,
|
|
Counter64, Counter32 FROM SNMPv2-SMI
|
|
TimeStamp,MacAddress,RowStatus,TruthValue FROM SNMPv2-TC
|
|
|
|
zxAn FROM ZTE-AN-TC-MIB
|
|
ifIndex FROM RFC1213-MIB
|
|
InterfaceIndexOrZero FROM IF-MIB
|
|
dot1agCfmMaNetEntry, Dot1agCfmMepIdOrZero,
|
|
dot1agCfmMepEntry, dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex, dot1agCfmMepIdentifier FROM IEEE8021-CFM-MIB;
|
|
|
|
|
|
zxAnCfmMib MODULE-IDENTITY
|
|
LAST-UPDATED "201001281600Z"
|
|
ORGANIZATION "ZTE Corporation"
|
|
CONTACT-INFO "ZTE NMS dept.
|
|
Li Xiaochun 68896452"
|
|
DESCRIPTION "This MIB defines Description of zte ethernet OAM
|
|
managed objects."
|
|
::= { zxAn 62 }
|
|
|
|
zxAnCfmObjects OBJECT IDENTIFIER ::= { zxAnCfmMib 1 }
|
|
|
|
zxAnCfmTrapObjects OBJECT IDENTIFIER ::= { zxAnCfmMib 2 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Following objects are defined.
|
|
|
|
-- Global Configuration
|
|
-- MA Management
|
|
-- MEP Management
|
|
-- Remote MEP Config Table
|
|
-- MIP Table
|
|
-- CFM Compatibility Table
|
|
-- CFM Interface Table
|
|
-- Trap Objects
|
|
--------------------------------------------------------------------------------
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Global Configuration
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnCfmGlobalObjects OBJECT IDENTIFIER ::= { zxAnCfmObjects 1 }
|
|
|
|
zxAnCfmEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled ( 1 ) ,
|
|
disabled ( 2 )
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enabled or disabled the CFM functions."
|
|
::= { zxAnCfmGlobalObjects 1}
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- MA Management
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnCfmMa OBJECT IDENTIFIER ::= { zxAnCfmObjects 2 }
|
|
|
|
zxAnCfmMaNetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCfmMaNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Association table. Each row in the table
|
|
represents an MA. An MA is a set of MEPs, each configured
|
|
with a single service instance.
|
|
|
|
This is the part of the complete MA table that is constant
|
|
across all Bridges in a Maintenance Domain, and across all
|
|
components of a single Bridge. That part of the MA table that
|
|
can vary from Bridge component to Bridge component is contained
|
|
in the dot1agCfmMaCompTable.
|
|
|
|
Creation of a Service Instance establishes a connectionless
|
|
association among the selected DSAPs. Configuring a
|
|
Maintenance association End Point (MEP) at each of the
|
|
DSAPs creates a Maintenance Association (MA) to monitor
|
|
that connectionless connectivity. The MA is identified by a
|
|
Short MA Name that is unique within the Maintenance Domain
|
|
and chosen to facilitate easy identification of the Service
|
|
Instance. Together, the Maintenance Domain Name and the
|
|
Short MA Name form the Maintenance Association Identifier
|
|
(MAID) that is carried in CFM Messages to identify
|
|
incorrect connectivity among Service Instances. A small
|
|
integer, the Maintenance association End Point Identifier
|
|
(MEPID), identifies each MEP among those configured on a
|
|
single MA (802.1ag clauses 3.19 and 18.2).
|
|
|
|
This table uses two indices, first index is the index of the
|
|
Maintenance Domain table. The second index is the same as the
|
|
index of the dot1agCfmMaCompEntry for the same MA.
|
|
|
|
The writable objects in this table need to be persistent
|
|
upon reboot or restart of a device."
|
|
::= { zxAnCfmMa 1 }
|
|
|
|
zxAnCfmMaNetEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCfmMaNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The MA table entry."
|
|
AUGMENTS { dot1agCfmMaNetEntry }
|
|
::= { zxAnCfmMaNetTable 1 }
|
|
|
|
ZxAnCfmMaNetEntry ::= SEQUENCE {
|
|
zxAnCfmMaNetCcmDaType INTEGER,
|
|
zxAnCfmMaProtect INTEGER,
|
|
zxAnCfmMaTunnel Unsigned32
|
|
}
|
|
|
|
zxAnCfmMaNetCcmDaType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unicast ( 1 ) ,
|
|
multicastclass1 ( 2 )
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the type of CCM DA(destination MAC address),
|
|
which should be unicast or multicastclass1.
|
|
"
|
|
::= { zxAnCfmMaNetEntry 1 }
|
|
|
|
zxAnCfmMaProtect OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
maProtectNothing (1),
|
|
cfmMaProtectVlan (2),
|
|
cfmMaProtectTunnel (3),
|
|
cfmMaProtectPort (4),
|
|
cfmMaProtectLink (5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the type of CCM DA(destination MAC address),
|
|
which should be unicast or multicastclass1.
|
|
"
|
|
::= { zxAnCfmMaNetEntry 2 }
|
|
|
|
zxAnCfmMaTunnel OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { zxAnCfmMaNetEntry 3 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- MEP Management
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnCfmMep OBJECT IDENTIFIER ::= { zxAnCfmObjects 3 }
|
|
|
|
zxAnCfmMepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCfmMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Mep Table"
|
|
::= { zxAnCfmMep 1 }
|
|
|
|
zxAnCfmMepEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCfmMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Mep Entry"
|
|
AUGMENTS { dot1agCfmMepEntry }
|
|
::= { zxAnCfmMepTable 1 }
|
|
|
|
ZxAnCfmMepEntry ::= SEQUENCE {
|
|
zxAnCfmMepCcCheckEnable TruthValue,
|
|
zxAnCfmMepLmEnable TruthValue,
|
|
zxAnCfmMepDmEnable TruthValue,
|
|
zxAnCfmMepLbmTestType INTEGER,
|
|
zxAnCfmMepLbmAppType INTEGER,
|
|
zxAnCfmMepLmTargetMacAddress MacAddress,
|
|
zxAnCfmMepLmTargetMepId Dot1agCfmMepIdOrZero,
|
|
zxAnCfmMepLmTargetIsMepId TruthValue,
|
|
zxAnCfmMepLmmDaType INTEGER,
|
|
zxAnCfmMepLmEndType INTEGER,
|
|
zxAnCfmMepLmInterval Integer32,
|
|
zxAnCfmMepLmDuration Integer32,
|
|
zxAnCfmMepLmPriority Unsigned32,
|
|
zxAnCfmMepLmFarendLoss Integer32,
|
|
zxAnCfmMepLmNearendLoss Integer32,
|
|
zxAnCfmMepLmLossRatio Integer32,
|
|
zxAnCfmMepLmStatus TruthValue,
|
|
zxAnCfmMepLmResultOk TruthValue,
|
|
zxAnCfmMepLmFarendLossRatio Integer32,
|
|
zxAnCfmMepDmTargetMacAddress MacAddress,
|
|
zxAnCfmMepDmTargetMepId Dot1agCfmMepIdOrZero,
|
|
zxAnCfmMepDmTargetIsMepId TruthValue,
|
|
zxAnCfmMep1dmDaType INTEGER,
|
|
zxAnCfmMepDdmDaType INTEGER,
|
|
zxAnCfmMepDmWayType INTEGER,
|
|
zxAnCfmMepDmInterval Integer32,
|
|
zxAnCfmMepDmDuration Integer32,
|
|
zxAnCfmMepDmPriority Unsigned32,
|
|
zxAnCfmMepDmOneWayAvgDelay Counter64,
|
|
zxAnCfmMepDmOneWayAvgDv Counter64,
|
|
zxAnCfmMepDmTwoWayAvgDelay Counter64,
|
|
zxAnCfmMepDmTwoWayAvgDv Counter64,
|
|
zxAnCfmMepDmStatus TruthValue,
|
|
zxAnCfmMepDmResultOk TruthValue,
|
|
zxAnCfmMepTestTlvLength Unsigned32,
|
|
zxAnCfmMepTestEnable INTEGER,
|
|
zxAnCfmMepTestAppType INTEGER,
|
|
zxAnCfmMepTestDestMacAddress MacAddress,
|
|
zxAnCfmMepTestDestMepId Dot1agCfmMepIdOrZero,
|
|
zxAnCfmMepTestDestIsMepId TruthValue,
|
|
zxAnCfmMepTestInterval Integer32,
|
|
zxAnCfmMepTestDuration Integer32,
|
|
zxAnCfmMepTestPriority Unsigned32,
|
|
zxAnCfmMepTestDaType INTEGER,
|
|
zxAnCfmMepTestTlvEnable INTEGER,
|
|
zxAnCfmMepTestPattern INTEGER,
|
|
zxAnCfmMepTestStatus TruthValue,
|
|
zxAnCfmMepTestResultOk TruthValue,
|
|
zxAnCfmMepTestMsgSeqNumber Unsigned32,
|
|
zxAnCfmMepTestNextMsgSeqNumber Unsigned32,
|
|
zxAnCfmMepTestTransmitRate Unsigned32,
|
|
zxAnCfmMepTestFarendLossRatio Integer32,
|
|
zxAnCfmMepTestFarendBitErrRatio Integer32,
|
|
zxAnCfmMepAisEnable INTEGER,
|
|
zxAnCfmMepLckEnable INTEGER,
|
|
zxAnCfmMepAisClientMegLevel Integer32,
|
|
zxAnCfmMepLckClientMegLevel Integer32,
|
|
zxAnCfmMepAisLckInterval Integer32,
|
|
zxAnCfmMepAisPriority Unsigned32,
|
|
zxAnCfmMepLckPriority Unsigned32,
|
|
zxAnCfmMepAisDaType INTEGER,
|
|
zxAnCfmMepLckDaType INTEGER,
|
|
zxAnCfmMepAisStatus TruthValue,
|
|
zxAnCfmMepLckStatus TruthValue,
|
|
zxAnCfmMepLckSendEnable TruthValue,
|
|
zxAnCfmMepRdiStatus TruthValue
|
|
}
|
|
|
|
zxAnCfmMepCcCheckEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enabled or disabled the CCM frame defect checking."
|
|
::= { zxAnCfmMepEntry 1 }
|
|
|
|
zxAnCfmMepLmEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enabled or disabled the ETH-LM functions."
|
|
::= { zxAnCfmMepEntry 2 }
|
|
|
|
zxAnCfmMepDmEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enabled or disabled the ETH-DM functions."
|
|
::= { zxAnCfmMepEntry 3 }
|
|
|
|
zxAnCfmMepLbmTestType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unicast ( 1 ) ,
|
|
multicastclass1 ( 2 )
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the type of ETH-LBM is unicast or multicast."
|
|
::= { zxAnCfmMepEntry 4 }
|
|
|
|
zxAnCfmMepLbmAppType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
connectivity ( 1 ) ,
|
|
outofservicediagnostic ( 2 ) ,
|
|
inservicediagnostic ( 3 )
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the app type of ETH-LBM, which means to verify
|
|
bidirectional connectivity of a MEP with a MIP or a peer MEP,
|
|
or to perform a bidirectional in-service or out-of-service
|
|
diagnostics test between a pair of peer MEPs.
|
|
This includes verifying bandwidth throughput, detecting bit
|
|
errors, etc.
|
|
"
|
|
::= { zxAnCfmMepEntry 5 }
|
|
|
|
zxAnCfmMepLmTargetMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted: A unicast
|
|
destination MAC address.
|
|
This address will be used if the value of the column
|
|
dot1agCfmMepLmTargetIsMepId is 'false'.
|
|
"
|
|
::= { zxAnCfmMepEntry 6 }
|
|
|
|
zxAnCfmMepLmTargetMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the Target MAC Address Field to be
|
|
transmitted:
|
|
The Maintenance association End Point Identifier of
|
|
another MEP in the same Maintenance Association
|
|
This address will be used if the value of the column
|
|
dot1agCfmMepLmTargetIsMepId is 'true'.
|
|
"
|
|
::= { zxAnCfmMepEntry 7 }
|
|
|
|
zxAnCfmMepLmTargetIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MEPID of the target MEP is used for
|
|
Linktrace transmission.
|
|
False indicates that unicast destination MAC address of the
|
|
target MEP is used for LM transmission.
|
|
"
|
|
::= { zxAnCfmMepEntry 8 }
|
|
|
|
zxAnCfmMepLmmDaType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unicast ( 1 ) ,
|
|
multicastclass1 ( 2 )
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the da type of LMM."
|
|
::= { zxAnCfmMepEntry 9 }
|
|
|
|
zxAnCfmMepLmEndType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
oneended ( 1 ) ,
|
|
twoended ( 2 )
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the end type of ETH-LM, which should be one-ended
|
|
or two-ended."
|
|
::= { zxAnCfmMepEntry 10 }
|
|
|
|
zxAnCfmMepLmInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval at which LMMs are sent by a MEP, the default
|
|
value is 5 seconds."
|
|
DEFVAL { 5 }
|
|
::= { zxAnCfmMepEntry 11 }
|
|
|
|
zxAnCfmMepLmDuration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time of duration of ETH-LM test, the default value is
|
|
60 seconds."
|
|
DEFVAL { 60 }
|
|
::= { zxAnCfmMepEntry 12 }
|
|
|
|
zxAnCfmMepLmPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value for LMMs transmitted by the MEP.
|
|
Default Value is the highest priority value allowed to pass
|
|
through the bridge port for any of this MEPs VIDs.
|
|
The management entity can obtain the default value for this
|
|
variable from the priority regeneration table by extracting the
|
|
highest priority value in this table on this MEPs bridge port.
|
|
(1 is lowest, then 2, then 0, then 3-7)."
|
|
::= { zxAnCfmMepEntry 13 }
|
|
|
|
zxAnCfmMepLmFarendLoss OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of far-end frame loss."
|
|
::= { zxAnCfmMepEntry 14 }
|
|
|
|
zxAnCfmMepLmNearendLoss OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of near-end frame loss."
|
|
::= { zxAnCfmMepEntry 15 }
|
|
|
|
zxAnCfmMepLmLossRatio OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The near-end frame loss ratio in percent."
|
|
::= { zxAnCfmMepEntry 16 }
|
|
|
|
zxAnCfmMepLmStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by the MEP LM Initiator State
|
|
Machine or an MIB manager to indicate
|
|
that another LM is being transmitted.
|
|
Reset to false by the MEP LM Initiator State Machine."
|
|
DEFVAL { false }
|
|
::= { zxAnCfmMepEntry 17 }
|
|
|
|
zxAnCfmMepLmResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
|
|
- true The Loss Measurement Message(s) will be
|
|
(or has been) sent.
|
|
- false The Loss Measurement Message(s) will not
|
|
be sent.
|
|
"
|
|
DEFVAL { true }
|
|
::= { zxAnCfmMepEntry 18 }
|
|
|
|
zxAnCfmMepLmFarendLossRatio OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The far-end frame loss ratio in percent."
|
|
::= { zxAnCfmMepEntry 19 }
|
|
|
|
zxAnCfmMepDmTargetMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted: A unicast
|
|
destination MAC address.
|
|
This address will be used if the value of the column
|
|
dot1agCfmMepDmTargetIsMepId is 'false'.
|
|
"
|
|
::= { zxAnCfmMepEntry 30 }
|
|
|
|
zxAnCfmMepDmTargetMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the Target MAC Address Field to be
|
|
transmitted:
|
|
The Maintenance association End Point Identifier of
|
|
another MEP in the same Maintenance Association
|
|
This address will be used if the value of the column
|
|
dot1agCfmMepDmTargetIsMepId is 'true'.
|
|
"
|
|
::= { zxAnCfmMepEntry 31 }
|
|
|
|
zxAnCfmMepDmTargetIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MEPID of the target MEP is used for Linktrace
|
|
transmission.
|
|
False indicates that unicast destination MAC address of the
|
|
target MEP is used for DM transmission.
|
|
"
|
|
::= { zxAnCfmMepEntry 32 }
|
|
|
|
zxAnCfmMep1dmDaType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unicast ( 1 ) ,
|
|
multicastclass1 ( 2 )
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The da type of 1DM."
|
|
::= { zxAnCfmMepEntry 33 }
|
|
|
|
zxAnCfmMepDdmDaType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unicast ( 1 ) ,
|
|
multicastclass1 ( 2 )
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The da type of DDM."
|
|
::= { zxAnCfmMepEntry 34 }
|
|
|
|
zxAnCfmMepDmWayType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
oneway ( 1 ) ,
|
|
twoway ( 2 )
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The DM way type."
|
|
::= { zxAnCfmMepEntry 35 }
|
|
|
|
zxAnCfmMepDmInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval at which DMMs are sent by a MEP, the default value
|
|
is 5 seconds."
|
|
DEFVAL { 5 }
|
|
::= { zxAnCfmMepEntry 36 }
|
|
|
|
zxAnCfmMepDmDuration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time of duration of ETH-DM test, the default value is
|
|
60 seconds."
|
|
DEFVAL { 60 }
|
|
::= { zxAnCfmMepEntry 37 }
|
|
|
|
zxAnCfmMepDmPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value for DMMs transmitted by the MEP.
|
|
Default Value is the highest priority value allowed to pass
|
|
through the bridge port for any of this MEPs VIDs.
|
|
The management entity can obtain the default value for this
|
|
variable from the priority regeneration table by extracting the
|
|
highest priority value in this table on this MEPs bridge port.
|
|
(1 is lowest, then 2, then 0, then 3-7).
|
|
"
|
|
::= { zxAnCfmMepEntry 38 }
|
|
|
|
zxAnCfmMepDmOneWayAvgDelay OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of One-way Frame Delay."
|
|
::= { zxAnCfmMepEntry 39 }
|
|
|
|
zxAnCfmMepDmOneWayAvgDv OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of One-way Frame Delay variation."
|
|
::= { zxAnCfmMepEntry 40 }
|
|
|
|
zxAnCfmMepDmTwoWayAvgDelay OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Two-way Frame Delay."
|
|
::= { zxAnCfmMepEntry 41 }
|
|
|
|
zxAnCfmMepDmTwoWayAvgDv OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Two-way Frame Delay variation."
|
|
::= { zxAnCfmMepEntry 42 }
|
|
|
|
zxAnCfmMepDmStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by the MEP DM Initiator State
|
|
Machine or an MIB manager to indicate that another LBM is
|
|
being transmitted.
|
|
Reset to false by the MEP DM Initiator State Machine."
|
|
DEFVAL { false }
|
|
::= { zxAnCfmMepEntry 43 }
|
|
|
|
zxAnCfmMepDmResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
|
|
- true The Delay Measurement Message(s) will be
|
|
(or has been) sent.
|
|
- false The Delay Measurement Message(s) will not
|
|
be sent.
|
|
"
|
|
DEFVAL { true }
|
|
::= { zxAnCfmMepEntry 44 }
|
|
|
|
zxAnCfmMepTestTlvLength OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..200)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of test TLV.
|
|
This object can be used if the value of the column
|
|
zxAnCfmMepTestTlvEnable is 'enable'."
|
|
::= { zxAnCfmMepEntry 54 }
|
|
|
|
zxAnCfmMepTestEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enabled or disabled the ETH-Test functions."
|
|
DEFVAL { disable }
|
|
::= { zxAnCfmMepEntry 55 }
|
|
|
|
zxAnCfmMepTestAppType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inServiceDiagnostic (1),
|
|
outOfServiceDiagnostic (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates the app type of ETH-Test, which means to
|
|
perform a bidirectional in-service or out-of-service
|
|
diagnostics test between a pair of peer MEPs.
|
|
This includes verifying bandwidth throughput, frame loss, bit
|
|
errors, etc."
|
|
::= { zxAnCfmMepEntry 56 }
|
|
|
|
zxAnCfmMepTestDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address field to be transmitted: A unicast
|
|
destination MAC address.
|
|
This address will be used if the value of the column
|
|
zxAnCfmMepTestDestIsMepId is 'false'."
|
|
::= { zxAnCfmMepEntry 57 }
|
|
|
|
zxAnCfmMepTestDestMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maintenance association end point identifier of another
|
|
MEP in the same maintenance association to which the ETH-Test
|
|
message is to be sent.
|
|
This address will be used if the value of the column
|
|
zxAnCfmMepTestDestIsMepId is 'true'."
|
|
::= { zxAnCfmMepEntry 58 }
|
|
|
|
zxAnCfmMepTestDestIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MEPID of the destination MEP is used for
|
|
ETH-Test transmission.
|
|
False indicates that unicast destination MAC address of the
|
|
target MEP is used for ETH-Test transmission."
|
|
::= { zxAnCfmMepEntry 59 }
|
|
|
|
zxAnCfmMepTestInterval OBJECT-TYPE
|
|
SYNTAX Integer32(100..10000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval value for ETH-Test messages transmitted by the MEP.
|
|
the default value is 1000 milliseconds."
|
|
DEFVAL { 1000 }
|
|
::= { zxAnCfmMepEntry 60 }
|
|
|
|
zxAnCfmMepTestDuration OBJECT-TYPE
|
|
SYNTAX Integer32(1..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time of duration of ETH-Test, the default value is
|
|
60 seconds."
|
|
DEFVAL { 60 }
|
|
::= { zxAnCfmMepEntry 61 }
|
|
|
|
zxAnCfmMepTestPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value for ETH-Test Messages transmitted by the MEP.
|
|
Default value is the highest priority value allowed to pass
|
|
through the bridge port for any of this MEPs VIDs.
|
|
The management entity can obtain the default value for this
|
|
variable from the priority regeneration table by extracting the
|
|
highest priority value in this table on this MEPs bridge port.
|
|
(1 is lowest, then 2, then 0, then 3-7).
|
|
"
|
|
::= { zxAnCfmMepEntry 62 }
|
|
|
|
zxAnCfmMepTestDaType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unicast (1),
|
|
multicastClass1 (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The destination address type of ETH-Test Message."
|
|
::= { zxAnCfmMepEntry 63 }
|
|
|
|
zxAnCfmMepTestTlvEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enabled or disabled ETH-Test TLV."
|
|
::= { zxAnCfmMepEntry 64 }
|
|
|
|
zxAnCfmMepTestPattern OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
allZeroesWithoutCrc32 (1), -- Null signal without CRC-32
|
|
allZeroesWithCrc32 (2), -- Null signal with CRC-32
|
|
prbsWithoutCrc32 (3), -- PRBS 2-31-1 without CRC-32
|
|
prbsWithCrc32 (4) -- PRBS 2-31-1 with CRC-32
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates the test pattern.
|
|
This pattern will be used if the value of the column
|
|
zxAnCfmMepTestTlvEnable is 'enable'."
|
|
::= { zxAnCfmMepEntry 65 }
|
|
|
|
zxAnCfmMepTestStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by the MEP TEST initiator state
|
|
machine or an MIB manager to indicate that another ETH-Test is
|
|
being done.
|
|
Reset to false by the MEP TEST initiator state machine."
|
|
DEFVAL { false }
|
|
::= { zxAnCfmMepEntry 66 }
|
|
|
|
zxAnCfmMepTestResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
- true The ETH-Test message(s) will be (or has been) sent.
|
|
- false The ETH-Test message(s) will not be sent."
|
|
DEFVAL { true }
|
|
::= { zxAnCfmMepEntry 67 }
|
|
|
|
zxAnCfmMepTestMsgSeqNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ETH-Test transaction identifier
|
|
(zxAnCfmMepTestNextMsgSeqNumber) of the first ETH-Test
|
|
message(to be) sent. The value returned is undefined if
|
|
zxAnCfmMepTestResultOk is false."
|
|
::= { zxAnCfmMepEntry 68 }
|
|
|
|
zxAnCfmMepTestNextMsgSeqNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Next sequence number/transaction identifier to be sent in a
|
|
ETH-Test message. This sequence number can be zero because
|
|
it wraps around."
|
|
::= { zxAnCfmMepEntry 69 }
|
|
|
|
zxAnCfmMepTestTransmitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum transmission rate at which frames with
|
|
ETH-Test information can be sent."
|
|
::= { zxAnCfmMepEntry 70 }
|
|
|
|
zxAnCfmMepTestFarendLossRatio OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The far-end frame loss ratio in percent."
|
|
::= { zxAnCfmMepEntry 71 }
|
|
|
|
zxAnCfmMepTestFarendBitErrRatio OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The far-end received bit error ratio in percent."
|
|
::= { zxAnCfmMepEntry 72 }
|
|
|
|
zxAnCfmMepAisEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enabled or disabled the ETH-AIS functions."
|
|
DEFVAL { disable }
|
|
::= { zxAnCfmMepEntry 87 }
|
|
|
|
zxAnCfmMepLckEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enabled or disabled the ETH-LCK functions."
|
|
DEFVAL { disable }
|
|
::= { zxAnCfmMepEntry 88 }
|
|
|
|
zxAnCfmMepAisClientMegLevel OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MEG level at which the most immediate client layer MIPs and MEPs
|
|
exist."
|
|
DEFVAL { 1 }
|
|
::= { zxAnCfmMepEntry 89 }
|
|
|
|
zxAnCfmMepLckClientMegLevel OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MEG level at which the most immediate client layer MIPs and MEPs
|
|
exist."
|
|
DEFVAL { 1 }
|
|
::= { zxAnCfmMepEntry 90 }
|
|
|
|
zxAnCfmMepAisLckInterval OBJECT-TYPE
|
|
SYNTAX Integer32(1..600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval value for AISMs and LCKMs transmitted by the MEP.
|
|
the default value is 1 second."
|
|
DEFVAL { 1 }
|
|
::= { zxAnCfmMepEntry 91 }
|
|
|
|
zxAnCfmMepAisPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value for AISMs transmitted by the MEP.
|
|
Default value is the highest priority value allowed to pass
|
|
through the bridge port for any of this MEPs VIDs.
|
|
The management entity can obtain the default value for this
|
|
variable from the priority regeneration table by extracting the
|
|
highest priority value in this table on this MEPs bridge port.
|
|
(1 is lowest, then 2, then 0, then 3-7).
|
|
"
|
|
::= { zxAnCfmMepEntry 92 }
|
|
|
|
zxAnCfmMepLckPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value for LCKMs transmitted by the MEP.
|
|
Default value is the highest priority value allowed to pass
|
|
through the bridge port for any of this MEPs VIDs.
|
|
The management entity can obtain the default value for this
|
|
variable from the priority regeneration table by extracting the
|
|
highest priority value in this table on this MEPs bridge port.
|
|
(1 is lowest, then 2, then 0, then 3-7).
|
|
"
|
|
::= { zxAnCfmMepEntry 93 }
|
|
|
|
zxAnCfmMepAisDaType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unicast (1),
|
|
multicastClass1 (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The destination address type of AISM."
|
|
::= { zxAnCfmMepEntry 94 }
|
|
|
|
zxAnCfmMepLckDaType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unicast (1),
|
|
multicastClass1 (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The destination address type of LCKM."
|
|
::= { zxAnCfmMepEntry 95 }
|
|
|
|
zxAnCfmMepAisStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents if MEP is in AIS status or not."
|
|
::= { zxAnCfmMepEntry 96 }
|
|
|
|
zxAnCfmMepLckStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents if MEP is in LCK status or not."
|
|
::= { zxAnCfmMepEntry 97 }
|
|
|
|
zxAnCfmMepLckSendEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents if LCK message can be sent by the MEP."
|
|
::= { zxAnCfmMepEntry 98 }
|
|
|
|
zxAnCfmMepRdiStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents if MEP is in RDI status or not."
|
|
::= { zxAnCfmMepEntry 99 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Remote MEP Config Table
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnCfmRemoteMepConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCfmRemoteMepConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Remote Mep Config Table"
|
|
::= { zxAnCfmMep 2 }
|
|
|
|
zxAnCfmRemoteMepConfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCfmRemoteMepConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Remote Mep Config Entry"
|
|
INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier }
|
|
::= { zxAnCfmRemoteMepConfTable 1 }
|
|
|
|
ZxAnCfmRemoteMepConfEntry ::= SEQUENCE {
|
|
zxAnCfmRemoteMepMacAddress MacAddress,
|
|
zxAnCfmRemoteMepConfRowStatus RowStatus
|
|
}
|
|
|
|
zxAnCfmRemoteMepMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the remote MEP."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.6.3:d and 20.19.7"
|
|
::= { zxAnCfmRemoteMepConfEntry 1 }
|
|
|
|
zxAnCfmRemoteMepConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rowstatus of this table. "
|
|
::= { zxAnCfmRemoteMepConfEntry 20 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- MIP Table
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnCfmMipTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCfmMipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Mip Table"
|
|
::= { zxAnCfmMep 3 }
|
|
|
|
zxAnCfmMipEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCfmMipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Mip Entry"
|
|
INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier }
|
|
::= { zxAnCfmMipTable 1 }
|
|
|
|
ZxAnCfmMipEntry ::= SEQUENCE {
|
|
zxAnCfmMipIfIndex InterfaceIndexOrZero,
|
|
zxAnCfmMipRowStatus RowStatus
|
|
}
|
|
|
|
zxAnCfmMipIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the interface index of the interface either a
|
|
bridge port, or an aggregated IEEE 802.1 link within a bridge
|
|
port, to which the MEP is attached.
|
|
|
|
|
|
Upon a restart of the system, the system SHALL, if necessary,
|
|
change the value of this variable so that it indexes the
|
|
entry in the interface table with the same value of ifAlias
|
|
that it indexed before the system restart. If no such
|
|
entry exists, then the system SHALL set this variable to 0.
|
|
"
|
|
::= { zxAnCfmMipEntry 1 }
|
|
|
|
zxAnCfmMipRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rowstatus of this table. "
|
|
::= { zxAnCfmMipEntry 20 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CFM Compatibility Table
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnCfmCompatibleObjects OBJECT IDENTIFIER ::= { zxAnCfmObjects 4 }
|
|
|
|
zxAnCfmCompatible OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compatibility of Device. Every bit denotes the compatibility
|
|
of some function. If the value of the bit is not 1, the related
|
|
function has compatible problem. The related function of the first
|
|
bit is the naming rules of string.
|
|
|
|
bit 1: value 1 means support ETH-Test, ETH-AIS, ETH-LCK and ETH-RDI
|
|
in zxAnCfmMepTable.
|
|
"
|
|
::= { zxAnCfmCompatibleObjects 1 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- CFM Interface Table
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnCfmInterfaceObjects OBJECT IDENTIFIER ::= { zxAnCfmObjects 5 }
|
|
|
|
zxAnCfmIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnCfmIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The CFM interface table.
|
|
This table specifies CFM interface configuration."
|
|
::= { zxAnCfmInterfaceObjects 1 }
|
|
|
|
zxAnCfmIfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnCfmIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The CFM interface entry."
|
|
INDEX { zxAnCfmRack, zxAnCfmShelf,
|
|
zxAnCfmSlot, zxAnCfmPort,
|
|
zxAnCfmOnu, zxAnCfmIfType,
|
|
zxAnCfmLogicalId }
|
|
::= { zxAnCfmIfTable 1 }
|
|
|
|
ZxAnCfmIfEntry ::= SEQUENCE {
|
|
zxAnCfmRack Integer32,
|
|
zxAnCfmShelf Integer32,
|
|
zxAnCfmSlot Integer32,
|
|
zxAnCfmPort Integer32,
|
|
zxAnCfmOnu Integer32,
|
|
zxAnCfmIfType INTEGER,
|
|
zxAnCfmLogicalId OBJECT IDENTIFIER,
|
|
zxAnCfmIfOamPduFilterEnable INTEGER
|
|
}
|
|
|
|
zxAnCfmRack OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rack number of the port."
|
|
::= { zxAnCfmIfEntry 1 }
|
|
|
|
zxAnCfmShelf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shelf number of the port."
|
|
::= { zxAnCfmIfEntry 2 }
|
|
|
|
zxAnCfmSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slot number of the port."
|
|
::= { zxAnCfmIfEntry 3 }
|
|
|
|
zxAnCfmPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number."
|
|
::= { zxAnCfmIfEntry 4 }
|
|
|
|
zxAnCfmOnu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ONU number. It is 0 in DSL port."
|
|
::= { zxAnCfmIfEntry 5 }
|
|
|
|
zxAnCfmIfType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
physicalPort(1),
|
|
onuUni(5)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the interface."
|
|
::= { zxAnCfmIfEntry 6 }
|
|
|
|
zxAnCfmLogicalId OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Logic index of the interface.
|
|
|
|
If zxAnCfmIfType is 'physicalPort', its value is 0.
|
|
|
|
If zxAnCfmIfType is 'onuUni', this object
|
|
indicates 'onuSlot.uniId', this type is used for SFUs only.
|
|
If the ONU slot is not cared about, the onuSlot is 0,
|
|
such as oid '0.1' indicates 'ONUSlot0.UNIID1'.
|
|
"
|
|
::= { zxAnCfmIfEntry 7 }
|
|
|
|
zxAnCfmIfOamPduFilterEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object controls whether the Ethernet OAMPDU
|
|
filtering is enabled on specific interface. A disable(2) value will
|
|
prevent the Ethernet OAMPDU filtering action on specific
|
|
interface."
|
|
DEFVAL { disable }
|
|
::= { zxAnCfmIfEntry 8 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Trap Objects
|
|
--------------------------------------------------------------------------------
|
|
|
|
END
|