WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zhone/ZhoneGR303-MIB

2617 lines
96 KiB
Plaintext
Raw Blame History

--
-- comVoiceGR303.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285
-- Tuesday, December 23, 2003 at 13:54:51
--
ZhoneGR303-MIB DEFINITIONS ::= BEGIN
IMPORTS
InterfaceIndexOrZero
FROM IF-MIB
PerfCurrentCount
FROM PerfHist-TC-MIB
Integer32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY,
OBJECT-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
TruthValue
FROM SNMPv2-TC
zhoneSystemConfigurationDateAndTime
FROM ZHONE-SYSTEM-MIB
zhoneVoice
FROM Zhone
ZhoneRowStatus, ZhoneAdminString, ZhoneShelfValueOrZero, ZhoneSlotValueOrZero
FROM Zhone-TC;
-- GR303-MIB definition
--
-- Copyright (C) 2000 by Zhone Technologies, Inc.
-- All rights reserved.
--
-- Comments to: <support@zhone.com>
-- Web URL: <http://www.zhone.com>
--
-- profile/record definition for 'interface-group' configuration attributes
--
--
--
-- profile/record definition for 'interface-group' dynamic attributes
--
--
--
-- profile/record definition for 'control-channel' configuration attributes
--
--
--
-- profile/record definition for 'control-channel' dynamic attributes
--
--
--
-- profile/record definition for 'current-statistics' attributes
--
--
--
-- profile/record definition for 'interval-statistics' attributes
--
--
--
-- profile/record definition for 'total-statistics' attributes
--
--
--
-- profile/record definition for 'ds-1 line mapping' configuration attributes
-- TBD: no need to create a statistics record yet since if the ifIndex is not
-- yet supported by the DDL compiler
--
--
-- profile/record definition for 'CRV' configuration attributes
--
--
-- profile/record definition for 'CRV' statistic attributes
--
--
--
-- 1.3.6.1.4.1.5504.4.3.1
zhoneGR303 MODULE-IDENTITY
LAST-UPDATED "200312231109Z" -- December 23, 2003 at 11:09 GMT
ORGANIZATION
"Zhone Technologies, Inc."
CONTACT-INFO
" Postal:
Zhone Technologies, Inc.
@ Zhone Way
7001 Oakport Street
Oakland, CA 94621
USA
Toll-Free: +1 877-ZHONE20 (+1 877-946-6320)
Tel: +1-510-777-7000
Fax: +1-510-777-7001
E-mail: support@zhone.com"
DESCRIPTION
"The MIB module to describe objects for GR-303. It is based
on the Generic Requirements document for GR-303, referred
to as GR-303-CORE.
The Generic Requirements (GR) document describes Bellcore's
view of the overall system functions and performance
levels required when a Digital Loop Carrier System (DLC)
is integrated into a Local Digital Switch (LDS). It
further describes a generic interface, one particular
means of interfacing a DLC Remote Digital Terminal (RDT)
with the LDS.
The proposed overall system requirements for Integrated
Digital Loop Carrier (IDLC) systems are expressed in
terms of functions, i.e., what the combination of RDT
and LDS must do when connected together. These end-to-end
system requirements are grouped into functional categories
dealing with (1) Customer services, (2) Digital network
interfaces, (3) Operations Systems interfaces,
(4) Craft interfaces, and (5) Overall system capabilities.
These proposed requirements do not specify or imply any
specific supplier implementation. They are, therefore,
termed generic system requirements."
REVISION "200312231109Z" -- December 23, 2003 at 11:09 GMT
DESCRIPTION
"V01.02.03
-- Add new switch type in ig table
"
REVISION "200311141310Z" -- November 14, 2003 at 13:10 GMT
DESCRIPTION
"V01.02.02
-- Add new sigType in CRV table
"
REVISION "200111151045Z" -- November 15, 2001 at 10:45 GMT
DESCRIPTION
"V01.02.01
- Change MAX-ACCESS of ds1LogicalId to 'read-create'."
REVISION "200108311230Z" -- August 31, 2001 at 12:30 GMT
DESCRIPTION
"V01.02.00
- Add ds1LogicalId to ds1LineMappingTable.
- Remove 'unknown' from igCrvSignalType."
REVISION "200108141447Z" -- August 14, 2001 at 14:47 GMT
DESCRIPTION
"V01.01.06
Remove default values for igAdminStatus, igWorkingMode, igAdminStatus, ds1Role,
igCrvSignalType, igCrvLocalAdminStatus"
REVISION "200106261500Z" -- June 26, 2001 at 15:00 GMT
DESCRIPTION
"V01.01.05
Add notification traps to the MIB."
REVISION "200103281055Z" -- March 28, 2001 at 10:55 GMT
DESCRIPTION
"V01.01.04 - Allow to change igSwitchType and igWorkingMode after setting the IG outOfService"
REVISION "200102151847Z" -- February 15, 2001 at 18:47 GMT
DESCRIPTION
"V01.01.03 - Add DEFVAL for TruthValue types."
REVISION "200102011301Z" -- February 01, 2001 at 13:01 GMT
DESCRIPTION
"V01.01.02 - change Zhone keywording for profile split"
REVISION "200101261148Z" -- January 26, 2001 at 11:48 GMT
DESCRIPTION
"V01.01.01 - add the igWorkingMode to the interfaceGroupTable"
REVISION "200012121157Z" -- December 12, 2000 at 11:57 GMT
DESCRIPTION
"V01.01.00 - change the igControlChannel table to add TMC
and EOC primary and secondary service state.Plus add
provisioning instructions as comments. "
REVISION "200009121212Z" -- September 12, 2000 at 12:12 GMT
DESCRIPTION
"V01.00.00 - Initial Release"
::= { zhoneVoice 1 }
--
-- Node definitions
--
--
-- GR-303 Interface Group
--
-- The GR-303 Interface Group consists of the following tables:
-- Interface Group Table
-- Interface Group Control Channel Table (AUGMENT)
-- Interface Group Statistics Current Table (AUGMENT)
-- Interface Group Statistics Interval Table
-- Interface Group Statistics Total Table (AUGMENT)
--
-- The Interface Group Table
--
-- 1.3.6.1.4.1.5504.4.3.1.1
interfaceGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF InterfaceGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GR-303 Interface Group Table.
Minimum granularity for GR-303 provisioning is the
Interface Group (IG) abstraction aka Internal Group.
The Interface Group Table describes attributes for
each provisioned GR-303 Interface Group and is also
the base table for the augmenting Interface Group
Control Channel Table. Each IG is configured
manually by an administrator.
Each IG entry (row) is indexed by a unique IG name.
Where both active and standby Interface Groups exist,
the same IG name refers to both the active and standby
Interface Group.
For all IG entries, the (shelf, slot) is unique. The
IG name is an externally visible global name that
refers to both the active and standby IGs. IG names
are used for call routing and does not change during
the IG lifetime.
The maximum number of entries or Interface Groups
is 'system-wide' and not bounded by a slot or card,
but can span multiple cards and shelves.
Each Interface Group is associated with the following
tables:
* augmenting Interface Group Control Channel row
* DS1 Line Mapping Table
* Line Circuit CRV Table
* augmenting IG Statistics Current row
* IG Statistics Interval Table
* augmenting IG Statistics Total row
After creating an IG entry an associated primary DS1
must be created. Without the primary DS1 an SNMP-SET
operation is not allowed on any 303 tables except the
deletion of the IG entry.
"
::= { zhoneGR303 1 }
-- 1.3.6.1.4.1.5504.4.3.1.1.1
interfaceGroupEntry OBJECT-TYPE
SYNTAX InterfaceGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the interfaceGroupTable. Indexed
by igNameId. Interface Groups can span multiple
cards and shelves. A row in this table is
created by setting the value of igRowStatus
to 'CreateAndGo', and setting the appropriate
values for the columns. Since this is the
base table for the following augmenting tables:
* Interface Group Control Channel Table
(igControlChannelTable),
* Interface Group Statistics Current Table
(igStatsCurrentTable),
* Interface Group Statistics Total Table
(igStatsTotalTable)
the corresponding row in the augmenting tables
must also be simultaneously created when a row
in interfaceGroupTable is created. Likewise,
when a row expires by setting the value of
igRowStatus to 'destroy' in the interfaceGroupTable
base table, the same row also expires in all
augmenting tables."
INDEX { igNameId }
::= { interfaceGroupTable 1 }
InterfaceGroupEntry ::=
SEQUENCE {
igNameId
ZhoneAdminString,
igShelf
ZhoneShelfValueOrZero,
igSlot
ZhoneSlotValueOrZero,
igPeerShelf
ZhoneShelfValueOrZero,
igPeerSlot
ZhoneSlotValueOrZero,
igSwitchType
INTEGER,
igPrimaryEocTmcDs1IfIndex
InterfaceIndexOrZero,
igSecondaryEocTmcDs1IfIndex
InterfaceIndexOrZero,
igAdminStatus
INTEGER,
igOperationalStatus
INTEGER,
igPeerStatus
INTEGER,
igMaxConfigCalls
Gauge32,
igCurrActiveCalls
Gauge32,
igStatsTimeElapsed
Integer32,
igStatsValidIntervals
Integer32,
igStatsInvalidIntervals
INTEGER,
igRowStatus
ZhoneRowStatus,
igWorkingMode
INTEGER
}
--
-- Interface Group Identification and Configuration Objects
--
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.1
igNameId OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Interface Group name is a unique symbolic
name that is used for call routing. The maximum
length for this name is 32 characters. Its value
cannot be modified during the Interface Group
lifetime. The igNameId is used, in conjunction
with other indices, to index into other GR-303
related tables."
::= { interfaceGroupEntry 1 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.2
igShelf OBJECT-TYPE
SYNTAX ZhoneShelfValueOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The shelf where this Interface Group and GR-303
stack resides. Range of valid values is 0-255.
A value of 0 indicates the Interface Group is not
currently installed on a specific card by the
GR-303 protocol stack."
REFERENCE
"GR-303-CORE 12.5.10"
::= { interfaceGroupEntry 2 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.3
igSlot OBJECT-TYPE
SYNTAX ZhoneSlotValueOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot where this Interface Group and GR-303
stack resides. Range of valid values is 0-17.
A value of 0 indicates the Interface Group is not
currently installed on a specific card by the
GR-303 protocol stack."
::= { interfaceGroupEntry 3 }
--
-- Multiple Interface Group (Multi-IG) Feature.
--
-- The multi-IG feature allows a Call Reference
-- Value (CRV), or line, of any IG to be associated
-- with the Line Circuit Address (LCA) of any
-- Access Circuit (AC). An LCA is the physical
-- location where a customer's distribution pair
-- is terminated; e.g., on shelf-#2, slot-#5,
-- circuit (VPI:VCI:CID). The multi-IG feature
-- allows any access circuit to be assigned to a
-- CRV on any one of the IGs either during capacity
-- activation or service activation. The actual
-- implementation of the access-circuit association
-- is a supplier's choice; e.g., it can be a
-- memory map of a CRV (or line) to the LCA of
-- the access circuit, a DS0 crossconnect, or a
-- time slot interchanger. For GR-303-CORE-
-- compatible IGs, an access circuit must be
-- associated with a CRV to gain access to the
-- LDS. The GR-303-CORE interface uses the CRV
-- in its Timeslot Management Channel (TMC) to
-- dynamically assign DS0s to access circuits on
-- a call-by-call basis; i.e., if an access
-- circuit is not assigned a CRV, it will never
-- be assigned a DS0 between the IDT and IG.
--
-- To support its multi-IG feature, an RDT is
-- required to support the individual interface
-- requirements of each of its IGs. An RDT must
-- support at least two GR-303-CORE-compatible
-- IGs for the multi-IG feature (but more may be
-- needed in some applications), and each of these
-- IGs must support the interface requirements
-- of the IDT discussed above. The maximum number
-- of DS1s on the feeder-side (i.e., toward the
-- central office) of the RDT is not limited except
-- that each IG supporting GR-303-CORE is limited
-- to a maximum of 28 DS1s. Additionally, the
-- number of access circuits accommodated by the
-- RDT can exceed 2048 with the constraint that
-- no more than 2048 access circuits can be
-- accommodated by any one GR-303-CORE IG. However,
-- each access circuit must have access to all
-- of the IGs supported by the RDT. In addition,
-- an access circuit associated with a GR-303-CORE
-- IG must have full access to all the DS0s
-- available to that IG for transport between
-- that IG and its IDT.
--
-- The multi-IG feature provides several benefits
-- for the integrated access architectures made
-- possible with GR-303-CORE products. They are:
-- equiptment breakage, growth, service separation,
-- multiple switching systems central offices, load
-- balancing.
--
-- 12.5.10.3 Requirements on an RDT for Multi-IG Feature
--
-- R12-507 [1376] The RDT shall provide the capability
-- to interface to a minimum of two different
-- GR-303-CORE IDTs (in the same LDS or in different
-- LDSs) and each IG-to-IDT interface shall meet
-- requirements for datalinks (EOC and TMC/CSC)
-- individually.
--
-- R12-508 [1377] The RDT is limited to a maximum
-- of 28 DS1s per IG 14 and each IG can support up
-- to a maximum of 2048 two-wire terminations toward
-- the customer's premises.
--
-- R12-509 [1378] Each IDT-IG interface shall be
-- capable of reusing CRV numbers and of being
-- resized, up or down, to support the deployed
-- size of the product.
--
-- CR12-510 [1379] In some BCC access architectures,
-- an RDT may be required to support more than
-- two GR-303-CORE IGs; eight or more may be needed
-- in some applications.
--
-- R12-522 [1391] The EOC paths and TMC/CSC paths
-- for a given IDT shall be on the same DS1s.
--
-- CR12-523 [1392] If the RDT has a DS1 protection
-- switching capability, the RDT shall provide the
-- capability to have a protection switching group
-- for each IDT.
--
-- R12-524 [1393] All customer line terminations
-- shall be capable of being provisioned to be
-- served by any of the IDTs terminating the RDT.
--
-- R12-525 [1394] The RDT shall support a
-- provisionable association between any of
-- its access circuits and any CRV (or line; if
-- the IG is not GR-303-CORE) of any IG in the RDT.
--
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.4
igPeerShelf OBJECT-TYPE
SYNTAX ZhoneShelfValueOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The shelf where this Redundancy Group's peer
(or standby) resides. Peer shelf and peer
slot define where this peer Interface Group
and GR-303 stack resides. Range of valid
values is 0-255. A peer shelf value of 0
represents a no backup configuration."
REFERENCE
"GR-303-CORE 12.5.10"
::= { interfaceGroupEntry 4 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.5
igPeerSlot OBJECT-TYPE
SYNTAX ZhoneSlotValueOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot where this Interface Group's peer
(or standby) resides. Peer shelf and peer
slot define where this Interface Group peer
and GR-303 stack resides. Range of valid
values is 0-17. A peer slot value of 0
represents a no backup configuration."
::= { interfaceGroupEntry 5 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.6
igSwitchType OBJECT-TYPE
SYNTAX INTEGER
{
lucent5Ess(2),
nortelDms100(3),
lucentGtd5(4),
santeraSanteraOne(5),
telicaPlexus9000(6),
taquaIx7000(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The switch vendor for the Interface Group. The
following switch types are defined: unknown,
lucent_5ess, nortel_dms-100, lucent_gtd5,
santera_santeraOne, telica_plexus9000 and
taqua_ix7000
This field can only be modified after setting
the igAdminStatus of the IG record to outOfService.
Note: 'unknown(1)' value is no longer supported
for this variable.
This variable is mandatory for IG row creation."
::= { interfaceGroupEntry 6 }
--
-- GR-303-CORE 12.6.3 Automatic EOC and TMC/CSC
-- path protection switching is required for
-- (IDLC) interfaces that support more than one
-- DS1, even though DS1 facility automatic
-- protection switching is optional. The EOC
-- and TMC/CSC path protection requirements are
-- to provide data-link layer protection of
-- these paths, which includes the DS0 paths.
--
-- A DS1 facility protection switching feature
-- enables traffic on a failed or degraded DS1
-- facility to be moved to one or more alternate
-- DS1 facilities. For more information see
-- GR-303-CORE 12.6.2.
--
-- Note that EOC and TMC/CSC path protection,
-- DS1 facility protection switching, and IG
-- redundancy (multi-IG Protection Switching)
-- are three different protection switching
-- strategies applying to different GR-303
-- capabilities and are not to be confused.
--
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.7
igPrimaryEocTmcDs1IfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For systems that support more than one DS1,
protection switching for the Embedded Operations
Channel (EOC) and a Time-slot Management Channel
(TMC) is mandatory.
This object refers to the ifIndex for the DS1
line supporting the active EOC and TMC path
protection switching. The value for this object
is equal to the value of ifIndex from the
Interfaces table of MIB II (RFC 1213).
Per-call time-slot assignment is accomplished
over a 64 kb/s TMC that carries mesages between
the LDS and RDT. These messages are used to make
and break time-slot assignments between line
units and DS0s on a per-call basis.
A separate DS0 data link, called the Embedded
Operations Channel (EOC), is used to transmit
operations messages between RDT and LDS/OSs.
The initial protection channel for the EOC is
channel number 12 of a DS1 and channel number
24 on the same DS1 is reserved for TMC
protection. Note that GR-303-CORE states that
protection switching for DS1 lines is optional.
GR-303-CORE R5-263 [1835] An RDT and an IDT
shall support EOC and TMC/CSC path protection
switching on systems supporting more than one DS1.
R5-264 [505] An RDT and an IDT shall receive
from a remote managing system and process
retrieval of time slots for the second EOC
(i.e., the initial standby) and the second TMC
or CSC.
R5-266 [507] An RDT and an IDT shall receive
from a remote managing system and process
requests to assign and to retrieve the DS1 line
for the standby EOC and the standby TMC/CSC.
The value will be zero if the Interface Group
is not installed on a specific card."
REFERENCE
"GR-303-CORE R5-263 [1835], R5-264 [505],
R5-266 [507]"
::= { interfaceGroupEntry 7 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.8
igSecondaryEocTmcDs1IfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Refer to the description for igPrimaryEocTmcDs1IfIndex.
This object refers to the ifIndex for the DS1
line supporting the standy EOC and TMC path
protection switching. The value for this object
is equal to the value of ifIndex from the
Interfaces table of MIB II (RFC 1213).
The value will be zero if the Interface Group
is not installed on a specific card or no secondary
DS1 is provisioned."
REFERENCE
"GR-303-CORE R5-263 [1835], R5-264 [505],
R5-266 [507]"
::= { interfaceGroupEntry 8 }
--
-- Interface Group Status Objects
--
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.9
igAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
inService(1),
outOfService(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GR-303-CORE The following requirements on status
and control of the overall RDT and IDT may also
be used during service assurance (e.g., placing
out-of-service for maintenance purposes). Placing
an RDT out-of-service means stopping it from
providing access services to the customers. It
does not mean cutting off communication with a
managing system (eg, ZMS) that controls the RDT.
R5-20 [272] An RDT shall receive from a remote
managing system (eg, ZMS) and process requests
to place the RDT out-of-service or in-service.
An RDT shall confirm with the managing system
before executing the request to place the system
out-of-service.
R5-21 [273] An RDT shall receive from a remote
managing system (eg, ZMS) and process requests
to retrieve the servic status of the RDT (in
or out of service).
Valid values are InService and OutOfService.
When an Interface Group is in outOfService state,
it is removed from the GR303 protocol stack and
is no longer installed on a specific card.
This field is mandatory for IG row creation."
REFERENCE
"GR-303-CORE R5-20 [272], R5-21 [273]"
::= { interfaceGroupEntry 9 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.10
igOperationalStatus OBJECT-TYPE
SYNTAX INTEGER
{
operable(1),
inoperable(2),
standby(3),
inoperableIsInProgress(4),
inoperableOosInProgress(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GR-303-CORE R5-22 [274] Upon request by a remote
managing system (eg, ZMS), an RDT shall provide
a managing system with the RDT operational status
indicating whether it is fully inoperable and
unable to provide service to the user, or it is
fully operable and available for use.
Valid values are operable, inoperable, standby,
inoperableIsInProgress and inoperableOosInProgress.
Clarification table of igAdminStatus and
igOperationalStatus:
igAdminStatus igOperationalStatus Description
------------- ------------------- -----------
outOfService operable not valid
outOfService inoperable admin of service
outOfService standby not valid
inService operable normal operations
inService inOperable fault
inService standby normal operations"
REFERENCE
"GR-303-CORE R5-22 [274]"
::= { interfaceGroupEntry 10 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.11
igPeerStatus OBJECT-TYPE
SYNTAX INTEGER
{
noStandbyConfigured(1),
configuredAndAvailable(2),
configuredAndUnavailable(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the peer (or standby) Interface Group
Valid peer status values are
* noStandbyConfigured
* configuredAndAvailable
* configuredAndUnavailable"
::= { interfaceGroupEntry 11 }
--
-- Interface Group Call Summary Objects
--
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.12
igMaxConfigCalls OBJECT-TYPE
SYNTAX Gauge32 (22..670)
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GR-303-CORE 1.3.2 Generic IDLC Interface
Requirements Summary. The Generic IDLC Interface
uses a separate 64-kb/s data link (DS0-channel)
to perform per-call time-slot assignments.
igMaxActiveCalls refers to the maximum number of
calls available to this Interface Group. This is
used in conjunction with igCurrActiveCalls, the
current number of calls, to provide a metric
for describing utilization. Does not imply that
a call has completed, but rather that the DS0
time-slot has been allocated for a call by the
GR-303 interface.
The DS1 frame is composed of 24 consecutively
numbered (1-24) time-slots (channels or DS0s).
Maximum number of active calls is the maximum
number of DS1s assigned to the IG times the
maximum number of channels or DS0s per DS1
less 2 or 4 channels for primary only EOC/TCM
and primary/secondary EOC/TCM =
({1..28} * 24 - {2,4}) = {22..670}
28*24 equals maximum number of DS0's on a DS3,
with 0 signaling channels. If you have one
28-T1 IG with no redundancy you can have
672 - 2 signaling DS0's , or 670, or 670
DS0's available for active calls.
If you have a single-T1 IG, you have only
24 - 2 signaling DS0's, or 22, DS0's
available for active calls."
REFERENCE
"GR-303-CORE 1.3.2, 4.4.2"
::= { interfaceGroupEntry 12 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.13
igCurrActiveCalls OBJECT-TYPE
SYNTAX Gauge32 (0..670)
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls currently in use.
igCurrActiveCalls is used in conjunction with
igMaxActiveCalls, the maximum number of calls
available, to provide a metric for describing
current utilization. Does not imply that a call
has completed, but rather that the DS0 time-slot
has been allocated for a call by the GR-303
interface.
The DS1 frame is composed of 24 consecutively
numbered (1-24) time-slots (channels or DS0s).
Maximum number of currently active calls is the
maximum number of DS1s assigned to the IG times
the maximum number of channels or DS0s per DS1
less 2 or 4 channels for primary only EOC/TCM
and primary/secondary EOC/TCM =
({1..28} * 24 - {2,4}) = {22..670}
28*24 equals maximum number of DS0's on a DS3,
with 0 signaling channels. If you have one
28-T1 IG with no redundancy you can have
672 - 2 signaling DS0's , or 670, or 670
DS0's available for active calls.
If you have a single-T1 IG, you have only
24 - 2 signaling DS0's, or 22, DS0's
available for active calls."
REFERENCE
"GR-303-CORE"
::= { interfaceGroupEntry 13 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.14
igStatsTimeElapsed OBJECT-TYPE
SYNTAX Integer32 (0..899)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since
the beginning of the current collection
period. If, for some reason, such as an
adjustment in the system's time-of-day clock,
the current interval exceeds the maximum value,
the agent will return the maximum value."
::= { interfaceGroupEntry 14 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.15
igStatsValidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
UNITS "intervals"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of previous intervals for which
data was collected. The value will typically
be 24, 48, 72, or 96 unless the interface
group was brought online within the last 6,
12, 18, or 24 hours, in which case the value
will be the number of complete 15 minute
intervals since the interface has been
online.
In the case where the agent is an SNMP
transport bridging proxy or SNMP translating
proxy, it is possible that some intervals
are unavailable. In this case, this interval
is the maximum interval number for which
data is available."
::= { interfaceGroupEntry 15 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.16
igStatsInvalidIntervals OBJECT-TYPE
SYNTAX INTEGER (0..96)
UNITS "intervals"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of intervals in the range from 0 to
igStatsValidIntervals for which no data is
available. This object will typically be zero
except in cases where the data for some intervals
are not available (e.g., in proxy situations)."
::= { interfaceGroupEntry 16 }
--
-- Interface Group Row Status
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.17
igRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control row creation and deletion.
A row in this table is created using a single
SNMP SET request with varbinds for:
a) igRowStatus set to'CreateAndGo',
b) the following READ-CREATE object(s) without a
default value (DEFVAL):
* igNameId
c) the following READ-CREATE objects with a
DEFVAL but whose defined default value is
inappropriate:
* igSwitchType
* igAdminStatus
* igStatsPeriod.
From augmented igControlChannelEntry:
* igControlChannelT303
* igControlChannelT396
* igSapi0MaxOutstandingFrames,
igSapi1MaxOutstandingFrames
* igSapi0N200, igSapi1N200
* igSapi0T200, igSapi1T200
* igSapi0T203, igSapi1T203
* igSapiPpsMode
If 'createAndGo' successfully created a new row,
the RowStatus will be 'active'. Subsequent to
successful row creation, the RowStatus can be
retrieved via an SNMP GET and the returned
RowStatus value is active. If the 'createAndGo'
was unsuccessful an SNMP error will be returned
and a subsequent GET on the non-existent row
will also return an SNMP error of noSuchInstance.
An SNMP SET with the RowStatus value of 'destroy'
indicates that the agent should remove the row
from service and then delete it.
The same rows must also be simultaneously created
or deleted in all augmenting tables:
* igControlChannelTable
* igStatsCurrentTable
* igStatsTotalTable"
::= { interfaceGroupEntry 17 }
--
-- 1.3.6.1.4.1.5504.4.3.1.1.1.18
igWorkingMode OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
passive(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Working mode indicates whether the selected switch can configure
the RDT using common management information service (CMIS) over
the Embedded Operations Channel (EOC) channel.
There are two working mode states, active and passive.
In the active mode, the seleted switch can configure the RDT for
Call Reference Values (CRVs) over the EOC channel.
In the passive state, CRVs can only be configured locally.
Even with the switch in the active state, however, RDT is required
to configure CRVs.
This field can only be modified after setting the igAdminStatus
of the IG record to outOfService.
This field is mandatory when provisioning an interfaceGroupEntry."
::= { interfaceGroupEntry 18 }
--
-- The Interface Group Control Channel Table (AUGMENT)
-- This table augments the Interface Group Table.
--
-- 1.3.6.1.4.1.5504.4.3.1.2
igControlChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgControlChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GR-303 Interface Group Control Channel Table.
The maximum number of entries is identical
to that of the Interface Group Table. the
interfaceGroupTable is the base table for
this augmented table."
::= { zhoneGR303 2 }
-- 1.3.6.1.4.1.5504.4.3.1.2.1
igControlChannelEntry OBJECT-TYPE
SYNTAX IgControlChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the igControlChannelTable which
AUGMENTs the base table interfaceGroupTable.
There is a 1-to-1 correspondence between rows
in interfaceGroupTable and rows in this table.
When a row is created in the base table
interfaceGroupTable, the corresponding row in
the augmenting table igControlChannelTable must
also be simultaneously created. A row in this
table is created by setting the value of
igRowStatus to 'CreateAndGo' and setting the
appropriate values for the columns. Likewise,
when a row expires by setting the value of
igRowStatus to 'destroy' in the interfaceGroupTable
base table, the same row also expires in this
augmenting table."
AUGMENTS { interfaceGroupEntry }
::= { igControlChannelTable 1 }
IgControlChannelEntry ::=
SEQUENCE {
igControlChannelTmcPrimarySvcState
INTEGER,
igControlChannelTmcSecondarySvcState
INTEGER,
igControlChannelT303
Integer32,
igControlChannelT396
Integer32,
igSapi0MaxOutstandingFrames
Integer32,
igSapi0N200
Integer32,
igSapi0T200
Integer32,
igSapi0T203
Integer32,
igSapi0PpsMode
INTEGER,
igSapi1MaxOutstandingFrames
Integer32,
igSapi1N200
Integer32,
igSapi1T200
Integer32,
igSapi1T203
Integer32,
igSapi1PpsMode
INTEGER,
igControlChannelEocPrimarySvcState
INTEGER,
igControlChannelEocSecondarySvcState
INTEGER
}
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.1
igControlChannelTmcPrimarySvcState OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
standby(2),
outOfService(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService."
::= { igControlChannelEntry 1 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.2
igControlChannelTmcSecondarySvcState OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
standby(2),
outOfService(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService."
::= { igControlChannelEntry 2 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.3
igControlChannelT303 OBJECT-TYPE
SYNTAX Integer32 (700 | 1200 | 1700 | 2200 | 2700 | 3200 | 3700 | 4200 | 4700)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value of the T303 timer for the Q931 protocol
12.5.5.17.1 T303
T303 is the length of time that the IDT and RDT
will wait for a reply to a SETUP message.
R12-446 [1315] At the IDT, the value of T303 is
not user settable, its value depends on specific
vendor implementations, but shall be within the
range of 700 ms to 4 seconds.
R12-447 [1316] The above range is not intended to
define acceptable response-time performance at
the RDT, where the low-load (i.e., no other
external stimuli requiring call processing
activity) mean response time to a SETUP message
shall be no greater than 200 ms.
R12-448 [1317] At the RDT, the value of T303
shall be provisionable from 700 ms through 4.7
seconds in steps of 500 ms; the default shall be
700 ms.
R12-449 [1318] The above range is not intended
to define acceptable response-time performance
at the IDT, where the low-load (i.e., no other
external stimuli requiring call processing
activity) mean response time to a SETUP message
shall be no greater than 500 ms.
Units in milliseconds."
REFERENCE
"GR-303-CORE 12.5.5.17.1"
DEFVAL { 700 }
::= { igControlChannelEntry 3 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.4
igControlChannelT396 OBJECT-TYPE
SYNTAX Integer32 (700 | 1700 | 2700 | 3700 | 4700 | 5700 | 6700 | 7700 | 8700 | 9700 | 10700 | 11700 | 12700 | 13700 | 14700)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value of the T396 timer for the Q931 protocol.
12.5.5.17.9 T396
T396 is the length of time that the RDT will
wait for a reply to a SETUP message following
the initial expiration of timer T303.
R12-459 [1328] The value of T396 shall be
provisionable from 700 ms through 14.7 seconds
in steps of 1 second; the default shall be 14.7
seconds.
R12-460 [1329] The above range is not intended
to define acceptable response-time performance
at the IDT, where the low-load (i.e., no other
external stimuli requiring call processing
activity) mean response time to a SETUP message
shall be no greater than 500 ms.
Units in milliseconds."
REFERENCE
"GR-303-CORE 12.5.5.17.9"
DEFVAL { 14700 }
::= { igControlChannelEntry 4 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.5
igSapi0MaxOutstandingFrames OBJECT-TYPE
SYNTAX Integer32 (1..7)
UNITS "frames"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both the
active and standby data links, per IG), an RDT
and an IDT shall receive from a remote managing
system and process assignment and retrieval of
the following LAPD parameters for the purpose of
remote provisioning the layer 2 connection:
a. Maximum number of outstanding information
frames at layer 2
Range of valid values is 1-7. Default value is 7.
Units in frames."
REFERENCE
"GR-303-CORE 97a."
DEFVAL { 7 }
::= { igControlChannelEntry 5 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.6
igSapi0N200 OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a remote
managing system and process assignment and
retrieval of the following LAPD parameters for
the purpose of remote provisioning the layer 2
connection:
b. Maximum number of retransmission for a frame
at layer 2 (N200)
12.4.3.5.3 Maximum Number of Retransmissions (N200)
R12-15 [887] The maximum number of retransmission
of a frame allowed, N200 shall be user selectable
within the range of 1 to 10, inclusive, with a
step size of 1 and a default value of 3."
REFERENCE
"GR-303-CORE 97b."
DEFVAL { 3 }
::= { igControlChannelEntry 6 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.7
igSapi0T200 OBJECT-TYPE
SYNTAX Integer32 (100 | 150 | 200 | 250 | 300 | 350)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a remote
managing system and process assignment and
retrieval of the following LAPD parameters for
the purpose of remote provisioning the layer 2
connection:
c. Maximum layer 2 wait time for an acknowledgment
of a transmitted frame (T200)
12.4.3.5.6 Timer T200
Timer T200 specifies the waiting period for
receipt of an acknowledgment of a transmitted
frame. A study of LAPD suggests that T200 should
be at least as great as the time required to
transmit three information frames. (See IEEE
Publication CH2175-8/85/0000-0121.) Therefore,
to protect against timeouts in an error-free
condition, the default value of T200 for each
SAP is sufficient to allow for the transmission
of at least three frames.
R12-18 [890] For all SAPs, the value of T200
shall be user selectable within the range of
100 ms to 350 ms, inclusive, the step size shall
be 50 ms, and the default value of T200 shall
be 150 ms.
Units in milliseconds."
REFERENCE
"GR-303-CORE 97c."
DEFVAL { 150 }
::= { igControlChannelEntry 7 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.8
igSapi0T203 OBJECT-TYPE
SYNTAX Integer32 (10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 160 | 170 | 180 | 190 | 200 | 210 | 220 | 230 | 240 | 250 | 260 | 270 | 280 | 290 | 300)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a remote
managing system and process assignment and
retrieval of the following LAPD parameters for
the purpose of remote provisioning the layer 2
connection:
d. Maximum layer 2 idle time before connection
verification is necessary (T203).
12.4.3.5.9 Timer T203
Timer T203 is used to time periods of inactivity
on a data link. When T203 expires, a supervisory
frame with the poll bit set to 1 is sent to
determine if the other side of the interface is
capable of sending and receiving frames. The
use of T203 is discussed in greater detail in
Section 12.6.3.3.
R12-19 [891] For all SAPS, the value of T203
shall be user selectable within the range of 10
to 300 seconds, inclusive, the step size shall
be 10 seconds, and the default value shall be
30 seconds.
Units in seconds."
REFERENCE
"GR-303-CORE 97d.
"
DEFVAL { 30 }
::= { igControlChannelEntry 8 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.9
igSapi0PpsMode OBJECT-TYPE
SYNTAX INTEGER
{
inhibit(1),
notInhibited(2),
notApplicable(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DS1 protection switching option. Valid
values are inhibit, notInhibited and
notApplicable. Note that SAPI 0 and SAPI 1
(EOC-TMC) are not switched together.
6.2.1 Facility Protection Switching - Option
6.2.1.1 General
The facility protection switching feature
enables traffic on a failed DS1 facility to
be moved to one or more alternate DS1 facilities.
The procedures for implementing DS1 facility
protection switching across the Generic IDLC
Interface are described in Section 12.6.2.
R6-75 [685] IDLC systems shall perform a
facility protection switch if and only if
that action will restore service.
12.6.2 DS1 Facility Protection Switch - Option
DS1 facility protection is an option for IDLC
systems. The procedures to be followed when
facility protection switching is implemented
for the Generic IDLC Interface are presented
in this section (see Section 6.2.1 for general
facility protection switching requirements).
A facility protection switching feature enables
traffic on a failed or degraded DS1 facility
to be moved to one or more alternate DS1
facilities.
R12-609 [1475] When an IDLC system includes
the facility protection switching option, a
dedicated protection facility with a 1:n
arrangement shall be used for the Generic
IDLC Interface.
R12-625 [1491] The default for facility protection
switching shall be notInhibited."
REFERENCE
"GR-303-CORE 6.2.1, 12.6.2"
DEFVAL { notInhibited }
::= { igControlChannelEntry 9 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.10
igSapi1MaxOutstandingFrames OBJECT-TYPE
SYNTAX Integer32 (1..7)
UNITS "frames"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Refer to igSapi0MaxOutstandingFrames
Not supported."
REFERENCE
"GR-303-CORE 97a."
DEFVAL { 7 }
::= { igControlChannelEntry 10 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.11
igSapi1N200 OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Refer to igSapi0N200
Not supported."
REFERENCE
"GR-303-CORE 97b."
DEFVAL { 3 }
::= { igControlChannelEntry 11 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.12
igSapi1T200 OBJECT-TYPE
SYNTAX Integer32 (100 | 150 | 200 | 250 | 300 | 350)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Refer to igSapi0T200"
REFERENCE
"GR-303-CORE 97c."
DEFVAL { 150 }
::= { igControlChannelEntry 12 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.13
igSapi1T203 OBJECT-TYPE
SYNTAX Integer32 (10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 160 | 170 | 180 | 190 | 200 | 210 | 220 | 230 | 240 | 250 | 260 | 270 | 280 | 290 | 300)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Refer to igSapi0T203"
REFERENCE
"GR-303-CORE 97d."
DEFVAL { 30 }
::= { igControlChannelEntry 13 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.14
igSapi1PpsMode OBJECT-TYPE
SYNTAX INTEGER
{
inhibit(1),
notInhibited(2),
notApplicable(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Refer to igSapi0PpsMode"
REFERENCE
"GR-303-CORE 6.2.1, 12.6.2"
DEFVAL { notInhibited }
::= { igControlChannelEntry 14 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.15
igControlChannelEocPrimarySvcState OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
standby(2),
outOfService(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService."
::= { igControlChannelEntry 15 }
--
-- 1.3.6.1.4.1.5504.4.3.1.2.1.17
igControlChannelEocSecondarySvcState OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
standby(2),
outOfService(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService."
::= { igControlChannelEntry 17 }
--
-- The Interface Group Statistics Current Table (AUGMENT)
-- This table augments the Interface Group Table.
--
-- 1.3.6.1.4.1.5504.4.3.1.3
igStatsCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgStatsCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GR-303 Interface Group Statistics Current Table.
The GR-303 Interface Group Statistics current
table contains various statistics being collected
for the current 15 minute interval.
The maximum number of entries is identical to that
of the Interface Group Table. the interfaceGroupTable
is the base table for this augmented table."
::= { zhoneGR303 3 }
-- 1.3.6.1.4.1.5504.4.3.1.3.1
igStatsCurrentEntry OBJECT-TYPE
SYNTAX IgStatsCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the igStatsCurrentTable which
AUGMENTs the base table interfaceGroupTable.
There is a 1-to-1 correspondence between rows
in interfaceGroupTable and rows in this table.
When a row is created in the base table
interfaceGroupTable, the corresponding row in
the augmenting table igStatsCurrentTable must
also be simultaneously created. A row in this
table is created by setting the value of
igRowStatus to 'CreateAndGo' and setting the
appropriate values for the columns. Likewise,
when a row expires by setting the value of
igRowStatus to 'destroy' in the interfaceGroupTable
base table, the same row also expires in this
augmenting table."
AUGMENTS { interfaceGroupEntry }
::= { igStatsCurrentTable 1 }
IgStatsCurrentEntry ::=
SEQUENCE {
igCurrentOutboundCalls
PerfCurrentCount,
igCurrentInboundCalls
PerfCurrentCount,
igCurrentOutboundCallsBlocked
PerfCurrentCount,
igCurrentGR303ProtocolErrors
PerfCurrentCount,
igCurrentTMCLapdSent
PerfCurrentCount,
igCurrentTMCLapdRcvd
PerfCurrentCount,
igCurrentTMCLapdRcvdErrs
PerfCurrentCount,
igCurrentEOCLapdSent
PerfCurrentCount,
igCurrentEOCLapdRcvd
PerfCurrentCount,
igCurrentEOCLapdRcvdErrs
PerfCurrentCount
}
--
-- 1.3.6.1.4.1.5504.4.3.1.3.1.1
igCurrentOutboundCalls OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound calls completed."
::= { igStatsCurrentEntry 1 }
--
-- 1.3.6.1.4.1.5504.4.3.1.3.1.2
igCurrentInboundCalls OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound calls completed."
::= { igStatsCurrentEntry 2 }
--
-- 1.3.6.1.4.1.5504.4.3.1.3.1.3
igCurrentOutboundCallsBlocked OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound calls that were blocked due
to no available time-slot."
::= { igStatsCurrentEntry 3 }
--
-- 1.3.6.1.4.1.5504.4.3.1.3.1.4
igCurrentGR303ProtocolErrors OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "errors"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GR-303 Protocol errors."
::= { igStatsCurrentEntry 4 }
--
-- 1.3.6.1.4.1.5504.4.3.1.3.1.5
igCurrentTMCLapdSent OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames sent on the Time-slot
Management Channel (TMC)."
::= { igStatsCurrentEntry 5 }
--
-- 1.3.6.1.4.1.5504.4.3.1.3.1.6
igCurrentTMCLapdRcvd OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number LAPD frames received on the Time-slot
Management Channel (TMC)."
::= { igStatsCurrentEntry 6 }
--
-- 1.3.6.1.4.1.5504.4.3.1.3.1.7
igCurrentTMCLapdRcvdErrs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number LAPD frames received in error on the
Time-slot Management Channel (TMC)."
::= { igStatsCurrentEntry 7 }
--
-- 1.3.6.1.4.1.5504.4.3.1.3.1.8
igCurrentEOCLapdSent OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames sent on the Embedded
Operations Channel (EOC)."
::= { igStatsCurrentEntry 8 }
--
-- 1.3.6.1.4.1.5504.4.3.1.3.1.9
igCurrentEOCLapdRcvd OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames received on the Embedded
Operations Channel (EOC)."
::= { igStatsCurrentEntry 9 }
--
-- 1.3.6.1.4.1.5504.4.3.1.3.1.10
igCurrentEOCLapdRcvdErrs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames received in error on the
Embedded Operations Channel (EOC)."
::= { igStatsCurrentEntry 10 }
--
-- The Interface Group Statistics Interval Table
--
-- 1.3.6.1.4.1.5504.4.3.1.4
igStatsIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgStatsIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"GR-303 Interface Group Statistics Interval Table.
The GR-303 Interface Group Statistics Interval
Table contains various statistics collected by
each Interface Group over the previous 6. 12.
18, or 24 hours of operation. The past 6, 12,
18, or 24 hours are broken into 24, 48, 72, or
96 completed 15 minute intervals. Each row in
this table represents one such interval
(identified by igIntervalNumber) for one
specific instance (identified by igIntervalIndex)."
::= { zhoneGR303 4 }
-- 1.3.6.1.4.1.5504.4.3.1.4.1
igStatsIntervalEntry OBJECT-TYPE
SYNTAX IgStatsIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the igStatsIntervalTable. Indexed by
(igNameId, igIntervalNumber)."
INDEX { igNameId, igIntervalNumber }
::= { igStatsIntervalTable 1 }
IgStatsIntervalEntry ::=
SEQUENCE {
igIntervalNumber
INTEGER,
igIntervalOutboundCalls
PerfCurrentCount,
igIntervalInboundCalls
PerfCurrentCount,
igIntervalOutboundCallsBlocked
PerfCurrentCount,
igIntervalGR303ProtocolErrors
PerfCurrentCount,
igIntervalTMCLapdSent
PerfCurrentCount,
igIntervalTMCLapdRcvd
PerfCurrentCount,
igintervalTMCLapdRcvdErrs
PerfCurrentCount,
igIntervalEOCLapdSent
PerfCurrentCount,
igIntervalEOCLapdRcvd
PerfCurrentCount,
igIntervalEOCLapdRcvdErrs
PerfCurrentCount,
igIntervalValidData
TruthValue
}
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.1
igIntervalNumber OBJECT-TYPE
SYNTAX INTEGER (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the 15 minutes interval completed 23 hours and 45
minutes prior to interval 1. If a 6, 12, or 18
hour period is selected, the max interval number
will be 24, 48, or 72."
::= { igStatsIntervalEntry 1 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.2
igIntervalOutboundCalls OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound calls completed."
::= { igStatsIntervalEntry 2 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.3
igIntervalInboundCalls OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound calls completed."
::= { igStatsIntervalEntry 3 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.4
igIntervalOutboundCallsBlocked OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound calls that were blocked due
to no available time-slot."
::= { igStatsIntervalEntry 4 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.5
igIntervalGR303ProtocolErrors OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "errors"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GR-303 Protocol errors."
::= { igStatsIntervalEntry 5 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.6
igIntervalTMCLapdSent OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames sent on the Time-slot
Management Channel (TMC)."
::= { igStatsIntervalEntry 6 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.7
igIntervalTMCLapdRcvd OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number LAPD frames received on the Time-slot
Management Channel (TMC)."
::= { igStatsIntervalEntry 7 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.8
igintervalTMCLapdRcvdErrs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number LAPD frames received in error on the
Time-slot Management Channel (TMC)."
::= { igStatsIntervalEntry 8 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.9
igIntervalEOCLapdSent OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames sent on the Embedded
Operations Channel (EOC)."
::= { igStatsIntervalEntry 9 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.10
igIntervalEOCLapdRcvd OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames received on the Embedded
Operations Channel (EOC)."
::= { igStatsIntervalEntry 10 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.11
igIntervalEOCLapdRcvdErrs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames received in error on the
Embedded Operations Channel (EOC)."
::= { igStatsIntervalEntry 11 }
--
-- 1.3.6.1.4.1.5504.4.3.1.4.1.12
igIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interval is valid."
DEFVAL { false }
::= { igStatsIntervalEntry 12 }
--
-- The Interface Group Statistics Total Table (AUGMENT)
-- This table augments the Interface Group Tab
--
-- 1.3.6.1.4.1.5504.4.3.1.5
igStatsTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgStatsTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"GR-303 Interface Group Statistics Total Table.
The GR-303 Interface Group Statistics Total
Table contains the cumulative sum of the
various statistics for the 24 hour period
preceding the current interval.
The maximum number of entries is identical to that
of the Interface Group Table. The interfaceGroupTable
is the base table for this augmented table."
::= { zhoneGR303 5 }
-- 1.3.6.1.4.1.5504.4.3.1.5.1
igStatsTotalEntry OBJECT-TYPE
SYNTAX IgStatsTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the igStatsTotalTable which
AUGMENTs the base table interfaceGroupTable.
There is a 1-to-1 correspondence between rows
in interfaceGroupTable and rows in this table.
When a row is created in the base table
interfaceGroupTable, the corresponding row in
the augmenting table igStatsTotalTable must
also be simultaneously created. A row in this
table is created by setting the value of
igRowStatus to 'CreateAndGo' and setting the
appropriate values for the columns. Likewise,
when a row expires by setting the value of
igRowStatus to 'destroy' in the interfaceGroupTable
base table, the same row also expires in this
augmenting table."
AUGMENTS { interfaceGroupEntry }
::= { igStatsTotalTable 1 }
IgStatsTotalEntry ::=
SEQUENCE {
igTotalOutboundCalls
PerfCurrentCount,
igTotalInboundCalls
PerfCurrentCount,
igTotalOutboundCallsBlocked
PerfCurrentCount,
igTotalGR303ProtocolErrors
PerfCurrentCount,
igTotalTMCLapdSent
PerfCurrentCount,
igTotalTMCLapdRcvd
PerfCurrentCount,
igTotalTMCLapdRcvdErrs
PerfCurrentCount,
igTotalEOCLapdSent
PerfCurrentCount,
igTotalEOCLapdRcvd
PerfCurrentCount,
igTotalEOCLapdRcvdErrs
PerfCurrentCount
}
--
-- 1.3.6.1.4.1.5504.4.3.1.5.1.1
igTotalOutboundCalls OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound calls completed."
::= { igStatsTotalEntry 1 }
--
-- 1.3.6.1.4.1.5504.4.3.1.5.1.2
igTotalInboundCalls OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound calls completed."
::= { igStatsTotalEntry 2 }
--
-- 1.3.6.1.4.1.5504.4.3.1.5.1.3
igTotalOutboundCallsBlocked OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound calls that were blocked due
to no available time-slot."
::= { igStatsTotalEntry 3 }
--
-- 1.3.6.1.4.1.5504.4.3.1.5.1.4
igTotalGR303ProtocolErrors OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "errors"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GR-303 Protocol errors."
::= { igStatsTotalEntry 4 }
--
-- 1.3.6.1.4.1.5504.4.3.1.5.1.5
igTotalTMCLapdSent OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames sent on the Time-slot
Management Channel (TMC)."
::= { igStatsTotalEntry 5 }
--
-- 1.3.6.1.4.1.5504.4.3.1.5.1.6
igTotalTMCLapdRcvd OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number LAPD frames received on the Time-slot
Management Channel (TMC)."
::= { igStatsTotalEntry 6 }
--
-- 1.3.6.1.4.1.5504.4.3.1.5.1.7
igTotalTMCLapdRcvdErrs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number LAPD frames received in error on the
Time-slot Management Channel (TMC)."
::= { igStatsTotalEntry 7 }
--
-- 1.3.6.1.4.1.5504.4.3.1.5.1.8
igTotalEOCLapdSent OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames sent on the Embedded
Operations Channel (EOC)."
::= { igStatsTotalEntry 8 }
--
-- 1.3.6.1.4.1.5504.4.3.1.5.1.9
igTotalEOCLapdRcvd OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames received on the Embedded
Operations Channel (EOC)."
::= { igStatsTotalEntry 9 }
--
-- 1.3.6.1.4.1.5504.4.3.1.5.1.10
igTotalEOCLapdRcvdErrs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LAPD frames received in error on the
Embedded Operations Channel (EOC)."
::= { igStatsTotalEntry 10 }
--
-- GR-303 DS1 Line Group
--
-- The GR-303 DS1 Line Group consists of the following table:
-- DS1 Line Mapping Table
--
-- The DS1 Line Mapping Table
--
-- 1.3.6.1.4.1.5504.4.3.1.6
ds1LineMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ds1LineMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GR-303 DS1 Line Mapping Table.
The DS1 Line Mapping Table describes attributes
for DS1 Line Termination and the mapping between
the Interface Group and DS1 standard MIB (rfc2495).
The maximum number of entries is determined by
the maximum number of DS1 lines for the Interface
Group, which is 28. Each Interface Group is
associated with a ds1LineMapping Table indexed
by (IG name, line group ID, ds1 channel number),
where line group ID is either a physical T1 line
group ID (eg, Dibrizzi) or a channelized DS3.
DS1 channel number is one of 28 DS1s associated
with a channelized DS3, that is being provisioned
to the Interface Group. If line group ID is a T1,
the associated DS1 channel number is 1.
GR-303-CORE R12-508 [1377] The RDT is limited to
a maximum of 28 DS1s per IG and each IG can
support up to a maximum of 2048 two-wire
terminations toward the customer's premises.
Once a primary or secondary DS1 is provisioned for an
IG it cannot be modified or deleted."
REFERENCE
"GR-303-CORE R12-508 [1377]"
::= { zhoneGR303 6 }
-- 1.3.6.1.4.1.5504.4.3.1.6.1
ds1LineMappingEntry OBJECT-TYPE
SYNTAX Ds1LineMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ds1LineMappingTable. Indexed
by (igNameId, dsnLgId, ds1ChannelNumber). A
row in this table is created by setting the
value of ds1LineMappingRowStatus to 'CreateAndGo',
and setting the appropriate values for the columns."
INDEX { igNameId, dsnLgId, ds1ChannelNumber }
::= { ds1LineMappingTable 1 }
Ds1LineMappingEntry ::=
SEQUENCE {
dsnLgId
Integer32,
ds1ChannelNumber
Integer32,
ds1Role
INTEGER,
ds1IfIndex
InterfaceIndexOrZero,
ds1LineMappingRowStatus
ZhoneRowStatus,
ds1LogicalId
Integer32
}
--
-- 1.3.6.1.4.1.5504.4.3.1.6.1.1
dsnLgId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The dsnLgId object identifies the line group entry
id of either a physical T1 line group ID (eg, Dibrizzi)
or a channelized DS3. If LgId represents a physical
T1, the DS1 channel number is 1. Else, the DS1
channel number is one of 28 DS1s associated with a
channelized DS3, that is being provisioned to the
Interface Group.
The range for dsnLgId is 1..2147483647 that is
obtained by the nextLineGroupId field."
::= { ds1LineMappingEntry 1 }
--
-- 1.3.6.1.4.1.5504.4.3.1.6.1.2
ds1ChannelNumber OBJECT-TYPE
SYNTAX Integer32 (1..28)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the DS1 for the channelized DS3 or
physical T1. The ds1ChannelNumber for a T1 is 1,
otherwise it refers to the channel number of the
DS3 port which contains the DS1."
::= { ds1LineMappingEntry 2 }
--
-- 1.3.6.1.4.1.5504.4.3.1.6.1.3
ds1Role OBJECT-TYPE
SYNTAX INTEGER
{
payload(1),
secondary(2),
primary(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The role the DS1 line assumes. Valid values are
payload, secondary, primary.
This field is mandatory for ds1LineMapping row creation."
::= { ds1LineMappingEntry 3 }
--
-- 1.3.6.1.4.1.5504.4.3.1.6.1.4
ds1IfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex for the DS1 line. The value for this
object is equal to the value of ifIndex from the
Interfaces table of MIB II (RFC 1213).
The value will be zero when the Interface Group
is not installed on a specific card by the
GR-303 protocol stack."
::= { ds1LineMappingEntry 4 }
--
-- 1.3.6.1.4.1.5504.4.3.1.6.1.5
ds1LineMappingRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control row creation and deletion.
A row in this table is created using a single
SNMP SET request with varbinds for:
a) ds1LineMappingRowStatus set to'CreateAndGo',
b) READ-CREATE objects with a DEFVAL but whose
defined default value is inappropriate:
* ds1Role
See igRowStatus description for RowStatus semantics."
::= { ds1LineMappingEntry 5 }
--
-- 1.3.6.1.4.1.5504.4.3.1.6.1.6
ds1LogicalId OBJECT-TYPE
SYNTAX Integer32 (1..28)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an unique number to identify each physical DS1
within an Interface Group between RDT and IDT. The DS1
Logical ID must have a value in the range of 1..28.
The value 1 is reserved for the primary DS1 and cannot
be used by any other DS1s.
This field is mandatory for ds1LineMappingEntry row creation."
::= { ds1LineMappingEntry 6 }
--
-- GR-303 CRV Group
--
-- The GR-303 CRV Group consists of the following table:
-- IG CRV Table
--
-- The IG CRV Table
--
-- 1.3.6.1.4.1.5504.4.3.1.7
igCrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgCrvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GR-303 CRV Table.
The GR-303-CORE interface uses the Call Reference
Value (CRV) in its Timeslot Management Channel
(TMC) to dynamically assign DS0s to access
circuits on a call-by-call basis; i.e., if an
access circuit is not assigned a CRV, it will
never be assigned a DS0 between the IDT and IG.
The maximum number of entries is specified by the
maximum number of subscribers or CRVs for the
Interface Group, which is 2048. Each Interface
Group is associated with an igCrvTable indexed
by (shelf, slot, IG name, CRV).
GR-303-CORE R12-508 [1377] The RDT is limited to
a maximum of 28 DS1s per IG and each IG can
support up to a maximum of 2048 two-wire
terminations toward the customer's premises."
REFERENCE
"GR-303-CORE R12-508 [1377]"
::= { zhoneGR303 7 }
-- 1.3.6.1.4.1.5504.4.3.1.7.1
igCrvEntry OBJECT-TYPE
SYNTAX IgCrvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the igCrvTable. Indexed by (igNameId,
igCrv). A row in this table is created by
setting the value of igCrvRowStatus to
'CreateAndGo', and setting the appropriate
values for the columns."
INDEX { igNameId, igCrv }
::= { igCrvTable 1 }
IgCrvEntry ::=
SEQUENCE {
igCrv
Integer32,
igCrvLocalAdminState
INTEGER,
igCrvRemoteAdminState
INTEGER,
igCrvOperStatus
BITS,
igCrvTmcState
INTEGER,
igCrvSignalType
INTEGER,
igCrvRowStatus
ZhoneRowStatus
}
-- 1.3.6.1.4.1.5504.4.3.1.7.1.1
igCrv OBJECT-TYPE
SYNTAX Integer32 (1..2048)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Call Reference Value (CRV) for the line.
Indexes into the igCrvTable. Valid range is
1-2048."
::= { igCrvEntry 1 }
--
-- 1.3.6.1.4.1.5504.4.3.1.7.1.2
igCrvLocalAdminState OBJECT-TYPE
SYNTAX INTEGER
{
inService(1),
outOfService(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The admin state on the local (RDT) side. Valid values
are inService and OutOfService.
This field is mandatory for IG CRV row creation."
::= { igCrvEntry 2 }
-- Even though this field is read only from an SNMP perspective it
-- is still read-write in the protection layer as the switch may
-- update this status. Thus this field is put in the PERSISTANT profile.
--
--
-- 1.3.6.1.4.1.5504.4.3.1.7.1.3
igCrvRemoteAdminState OBJECT-TYPE
SYNTAX INTEGER
{
inService(1),
outOfService(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The admin state on the remote (IDT) side. Valid
values are inService and OutOfService.
For CRVs assocated with an IG with igWorkingMode set
to passive, the remote-admin-state of a crv is set to
inservice.
For igWorkingMode of active, the default value for
remote-admin-state of a crv is set to outofservice.
It will then be changed to inservice when the switch
provisions this crv.
"
::= { igCrvEntry 3 }
--
-- 1.3.6.1.4.1.5504.4.3.1.7.1.4
igCrvOperStatus OBJECT-TYPE
SYNTAX BITS
{
up(0),
fault(1),
manualOos(2),
removedFromServiceBySwitch(3),
unEquipped(4),
notConnected(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The line operational status is the composition (ie,
logical OR'ing) of definitions from GR-303-CORE.
Some of them are service affecting, some of them
don't affect the ability of service. Valid
states are:
* up, line is operational
* fault (FLT), a fault condition
* manualOos (MTCE), object is manually taken OOS for
maintenance purpose
* removedFromServiceBySwitch (SWTCH), entity
removed from service by switch
* UnEquipped - default state when new CRV
entry is added
* notConnected, line is not connected"
::= { igCrvEntry 4 }
--
-- 1.3.6.1.4.1.5504.4.3.1.7.1.5
igCrvTmcState OBJECT-TYPE
SYNTAX INTEGER
{
inService(1),
permanentSignal(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time-slot Management Channel (TMC) state
indicates when the line is off-hook.
Valid states are inService and permanentSignal.
The default value is inService.
A line in a permanent signal condition initiates
call clearing, during which time the RDT
disconnects the RDT line unit from the DS0
(time-slot) assigned to the call, and continues
to monitor the line. The RDT will report
the return to on-hook status."
::= { igCrvEntry 5 }
--
-- 1.3.6.1.4.1.5504.4.3.1.7.1.6
igCrvSignalType OBJECT-TYPE
SYNTAX INTEGER
{
loopstart(2),
groundstart(3),
loopreversebattery(4),
electronicbusinessset(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Signaling type specifies the signaling method
currently used by this crv. Valid types are
loop start,ground start or loop reverse battery
for analog line and electronic business set.
This value is set by the voice switch via the EOC
or in the subscriber record.
Note that 'unknown(1)' is no longer a supported
option.
This field is mandatory for IG CRV row creation."
::= { igCrvEntry 6 }
-- 1.3.6.1.4.1.5504.4.3.1.7.1.7
igCrvRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control row creation and deletion.
A row in this table is created using a single
SNMP SET request with varbinds for:
a) igCrvRowStatus set to'CreateAndGo',
b) the following READ-CREATE object(s) without a
default value (DEFVAL): igCrvLineState
c) READ-CREATE objects with a DEFVAL but whose
defined default value is inappropriate:
* igCrvSignalType
See igRowStatus description for RowStatus semantics."
::= { igCrvEntry 7 }
-- 1.3.6.1.4.1.5504.4.3.1.8
gr303Traps OBJECT-IDENTITY
STATUS current
DESCRIPTION
"All the Zhone trap notifications for GR303 managed objectes
will be defined under gr303Traps."
::= { zhoneGR303 8 }
-- 1.3.6.1.4.1.5504.4.3.1.8.0
gr303TrapsPrefix OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the 0 prefix which is required for all GR303 traps
defined in SNMPv2."
::= { gr303Traps 0 }
-- 1.3.6.1.4.1.5504.4.3.1.8.0.1
igOperStatusChange NOTIFICATION-TYPE
OBJECTS { igAdminStatus, igOperationalStatus }
STATUS current
DESCRIPTION
"A notification is sent when the operating status of the IG
changes."
::= { gr303TrapsPrefix 1 }
-- 1.3.6.1.4.1.5504.4.3.1.8.0.2
igTmcPrimaryStateChange NOTIFICATION-TYPE
OBJECTS { igControlChannelTmcPrimarySvcState }
STATUS current
DESCRIPTION
"A notification is sent when the status of the TMC channel on
the primary DS1 changes. "
::= { gr303TrapsPrefix 2 }
-- 1.3.6.1.4.1.5504.4.3.1.8.0.3
igTmcSecondaryStateChange NOTIFICATION-TYPE
OBJECTS { igControlChannelTmcSecondarySvcState }
STATUS current
DESCRIPTION
"A notification is sent when the status of the TMC channel on
the sedondary DS1 changes. "
::= { gr303TrapsPrefix 3 }
-- 1.3.6.1.4.1.5504.4.3.1.8.0.4
igEocPrimaryStateChange NOTIFICATION-TYPE
OBJECTS { igControlChannelEocPrimarySvcState }
STATUS current
DESCRIPTION
"A notification is sent when the status of the EOC channel on
the primary DS1 changes. "
::= { gr303TrapsPrefix 4 }
-- 1.3.6.1.4.1.5504.4.3.1.8.0.5
igEocSecondaryStateChange NOTIFICATION-TYPE
OBJECTS { igControlChannelEocSecondarySvcState }
STATUS current
DESCRIPTION
"A notification is sent when the status of the EOC channel on
the secondary DS1 changes."
::= { gr303TrapsPrefix 5 }
-- 1.3.6.1.4.1.5504.4.3.1.8.0.6
igCrvRemoteStateChange NOTIFICATION-TYPE
OBJECTS { igCrvLocalAdminState, igCrvRemoteAdminState, igCrvOperStatus }
STATUS current
DESCRIPTION
"A notification is sent when switch removes a CRV from
operation or restores the CRV to opearation."
::= { gr303TrapsPrefix 6 }
-- 1.3.6.1.4.1.5504.4.3.1.8.0.7
igCrvTmcStateChange NOTIFICATION-TYPE
OBJECTS { igCrvTmcState }
STATUS current
DESCRIPTION
"A notification is sent when igCrvTmcState changes."
::= { gr303TrapsPrefix 7 }
-- 1.3.6.1.4.1.5504.4.3.1.8.0.8
igSystemTimeChange NOTIFICATION-TYPE
OBJECTS { zhoneSystemConfigurationDateAndTime, igRowStatus }
STATUS current
DESCRIPTION
"When an IG is connected to a 5ESS switch, the switch will
synchronize system time with the RDT."
::= { gr303TrapsPrefix 8 }
END
--
-- comVoiceGR303.mib
--
View Git Blame Copy Permalink