1820 lines
67 KiB
Plaintext
1820 lines
67 KiB
Plaintext
--
|
|
-- phyVaIf.mib
|
|
-- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285
|
|
-- Monday, November 16, 2009 at 10:24:53
|
|
--
|
|
|
|
Zhone-VOICE-ANALOG-IF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
ifIndex, InterfaceIndex
|
|
FROM IF-MIB
|
|
Integer32, Counter32, OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
zhonePhysical, zhoneModules
|
|
FROM Zhone
|
|
ZhoneRowStatus
|
|
FROM Zhone-TC;
|
|
|
|
|
|
--
|
|
--
|
|
--
|
|
-- --
|
|
--
|
|
-- --
|
|
-- --
|
|
-- --
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.6.13
|
|
zhoneVoiceAnalogIf-MIB MODULE-IDENTITY
|
|
LAST-UPDATED "200911171030Z" -- November 16, 2009 at 10:30 GMT
|
|
ORGANIZATION
|
|
"Zhone Technologies, Inc."
|
|
CONTACT-INFO
|
|
"Postal:
|
|
Zhone Technologies, Inc.
|
|
@Zhone Way
|
|
7001 Oakport
|
|
Oakland, Ca 94621
|
|
|
|
Toll-Free 877-ZHONE20 (+1 877-946-6320)
|
|
Tel: +1 510-777-7000
|
|
Fax: +1 510-777-7001
|
|
Email: support@zhone.com
|
|
"
|
|
DESCRIPTION
|
|
"Analog Voice Interface MIB module.
|
|
This MIB manages the E&M, FXO, FXS
|
|
Interfaces in the Zhone's product.
|
|
"
|
|
REVISION "200905050236Z" -- May 05, 2009 at 02:36 GMT
|
|
DESCRIPTION
|
|
"V01.00.10 - Added new field if-cfg-loop-current in table analog-if-cfg-profile"
|
|
REVISION "200803261745Z" -- March 26, 2008 at 17:45 GMT
|
|
DESCRIPTION
|
|
"Add ebs to zhoneValIfCfgLineType field."
|
|
REVISION "200711010230Z" -- November 01, 2007 at 02:30 GMT
|
|
DESCRIPTION
|
|
"V01.00.08 - Edited IfCfgImpedance field descriptions that ohmscomplex1 and ohmscomplex2 are Not Supported."
|
|
REVISION "200509061114Z" -- September 06, 2005 at 11:14 GMT
|
|
DESCRIPTION
|
|
"Deprecate zhonePotsRingTable. Move to zhoneVoiceRingTable in genVoiceStatMib."
|
|
REVISION "200508081500Z" -- August 08, 2005 at 15:00 GMT
|
|
DESCRIPTION
|
|
"Add zhonePotsRing table."
|
|
REVISION "200505111520Z" -- May 11, 2005 at 15:20 GMT
|
|
DESCRIPTION
|
|
"Changed zhoneVaIfCfgImpedance default value description from ohms900Complex to ohms600Complex."
|
|
REVISION "200505021722Z" -- May 02, 2005 at 17:22 GMT
|
|
DESCRIPTION
|
|
"Add default value descriptions for zhoneVAIfCfgImpedance, zhoneVAIffgReceivelp, zhoneVaIfCfgTransmitTlp."
|
|
REVISION "200410071134Z" -- October 07, 2004 at 11:34 GMT
|
|
DESCRIPTION
|
|
"zhoneVaIfEMCfgEntry
|
|
change SignalType, CfgOperation and DialType from read-write to read-only"
|
|
REVISION "200110101119Z" -- October 10, 2001 at 11:19 GMT
|
|
DESCRIPTION
|
|
"V01.00.02 - Removed Mark-Up for the zhoneVaIfFXSTimingDigitDuration and zhoneVaIfFXSTimingInterDigitDuration OIDs. Also added comment for the zhoneVaIfStatusSignalError OID."
|
|
REVISION "200102151852Z" -- February 15, 2001 at 18:52 GMT
|
|
DESCRIPTION
|
|
"V01.00.01 - Add DEFVAL for TruthValue types."
|
|
REVISION "200009121421Z" -- September 12, 2000 at 14:21 GMT
|
|
DESCRIPTION
|
|
"V01.00.00 - Initial Release"
|
|
::= { zhoneModules 13 }
|
|
--
|
|
--
|
|
-- Overview of Analog Voice interface MIB
|
|
--
|
|
-- The Analog Voice interface MIB provides the standard configuration,
|
|
-- timing parameters and telephony hook, ring status information on zhone's
|
|
-- Analog Voice interface implementation. The following groups
|
|
-- are managed:
|
|
-- 1) Analog interface general group
|
|
-- 2) E&M (recEive and transMit) interface group
|
|
-- 3) FXO (Foreign Exchange Office) interface group
|
|
-- 4) FXS (Foreign Exchange Station) interface group
|
|
--
|
|
-- ifEntry for an Analog Voice Interface
|
|
--
|
|
-- The ifEntry for an Analog Voice Interface supports the
|
|
-- ifGeneralInformationGroup of zhone IF-MIB.
|
|
--
|
|
-- ifTable Comments
|
|
-- ============== =====================================================
|
|
-- ifIndex Each Analog telephony interface is represented by an
|
|
-- ifEntry.
|
|
-- ifDescr Textual port description.
|
|
-- ifType The IANA value of voiceEM(100), voiceFXO(101) and
|
|
-- voiceFXS(102).
|
|
-- ifSpeed contains a zero value.
|
|
-- ifPhysAddress contains an octet string of zero length.
|
|
--
|
|
-- ifAdminStatus The desired administrative status of the
|
|
-- Analog Telephony interface port.
|
|
-- ifOperStatus The current operational status of the Analog Telephony
|
|
-- interface port. Note that dormant(5) is explicitly being
|
|
-- used as defined in RFC 1573.
|
|
-- ifLastChange Refer to RFC 1573.
|
|
-- ifLinkUpDownTrapEnable
|
|
-- Refer to RFC 1573.
|
|
-- ifConnectorPresent
|
|
-- Refer to RFC 1573.
|
|
-- ifHighSpeed contains a zero value.
|
|
-- ifName Refer to RFC 1573.
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
|
|
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
-- To Create Mib Handler file ( run in /vob/mibs/src):
|
|
-- /vob/EPILOGUE/binaries/emissary/solaris/mibcomp
|
|
-- rfc1907.mib iftype.mib rfc2233.mib Zhone.mib Zhone-TC.mib
|
|
-- -stub -o "MibHdlr.c"
|
|
-- 1.3.6.1.4.1.5504.5.6
|
|
zhoneVaIfObjects OBJECT IDENTIFIER ::= { zhonePhysical 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.1
|
|
zhoneVaIfGeneralObjects OBJECT IDENTIFIER ::= { zhoneVaIfObjects 1 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- The Analog Voice General Interface Group
|
|
-- ****************************************************************************
|
|
-- [1] Analog Voice Interface Standard Configuration Table
|
|
-- [2] Analog Voice Interface Status Table
|
|
--
|
|
--
|
|
--
|
|
-- ****************************************************************************
|
|
-- The Analog Voice Interface Standard Configuration Table
|
|
-- ****************************************************************************
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1
|
|
zhoneVaIfCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Analog Voice Standard Configuration Table. It contains
|
|
the standard configuration information of the analog
|
|
telephony interface.
|
|
"
|
|
::= { zhoneVaIfGeneralObjects 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1
|
|
zhoneVaIfCfgEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the configuration table for each voice analog
|
|
interface. The entry is created when the voice analog
|
|
hardware is detected.
|
|
"
|
|
INDEX { ifIndex }
|
|
::= { zhoneVaIfCfgTable 1 }
|
|
|
|
|
|
ZhoneVaIfCfgEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfCfgImpedance
|
|
INTEGER,
|
|
zhoneVaIfCfgReceiveTLP
|
|
INTEGER,
|
|
zhoneVaIfCfgTransmitTLP
|
|
INTEGER,
|
|
zhoneVaIfCfgTrunkConditioning
|
|
INTEGER,
|
|
zhoneVaIfCfgLineType
|
|
INTEGER,
|
|
zhoneVaIfCfgIntegratedDSP
|
|
TruthValue,
|
|
zhoneVaIfCfgLineCapabilities
|
|
BITS,
|
|
zhoneVaIfCfgMaintenanceMode
|
|
INTEGER,
|
|
zhoneVaIfCfgPCMEncoding
|
|
INTEGER,
|
|
zhoneVaIfCfgReceiveTLPNum
|
|
INTEGER,
|
|
zhoneVaIfCfgTransmitTLPNum
|
|
INTEGER,
|
|
zhoneVaIfCfgLoopCurrent
|
|
INTEGER,
|
|
zhoneVaIfCfgRingVoltage
|
|
INTEGER
|
|
}
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.1
|
|
zhoneVaIfCfgImpedance OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
other(1),
|
|
ohms600Real(2),
|
|
ohms600Complex(3),
|
|
ohms900Complex(4),
|
|
ohmsComplex1(5),
|
|
ohmsComplex2(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the terminating impedance of voice analog
|
|
interfaces.
|
|
other - none of the following; arbitrary,
|
|
within limits, for special cases.
|
|
ohms600Real - 600 Ohms.
|
|
ohms600Complex - 600 Ohms + 2.16uF
|
|
ohms900Complex - 900 Ohms + 2.16uF.
|
|
ohmsComplex1 - Not Supported.
|
|
ohmsComplex2 - Not Supported.
|
|
Default value is ohms600Complex.
|
|
"
|
|
::= { zhoneVaIfCfgEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.2
|
|
zhoneVaIfCfgReceiveTLP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fxsRtlpN9db(1),
|
|
fxsRtlpN8db(2),
|
|
fxsRtlpN7db(3),
|
|
fxsRtlpN6db(4),
|
|
fxsRtlpN5db(5),
|
|
fxsRtlpN4db(6),
|
|
fxsRtlpN3db(7),
|
|
fxsRtlpN2db(8),
|
|
fxsRtlpN1db(9),
|
|
fxsRtlp0db(10),
|
|
fxsRtlp1db(11),
|
|
fxsRtlp2db(12),
|
|
fxsRtlp3db(13),
|
|
rTlpNummeric(14)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Receive Transmission Level Point (RTLP) settings control the amount gain or loss added to the incoming signal after it is decoded to analog.
|
|
to increase the signal level set the RTLP setting to higher values. The default is fxsRtlpN6db. Rtlpnummeric selects entering the actual
|
|
value in zhoneVaIFCfgReceiveTLPNum."
|
|
::= { zhoneVaIfCfgEntry 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.3
|
|
zhoneVaIfCfgTransmitTLP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fxsTtlp9db(1),
|
|
fxsTtlp8db(2),
|
|
fxsTtlp7db(3),
|
|
fxsTtlp6db(4),
|
|
fxsTtlp5db(5),
|
|
fxsTtlp4db(6),
|
|
fxsTtlp3db(7),
|
|
fxsTtlp2db(8),
|
|
fxsTtlp1db(9),
|
|
fxsTtlp0db(10),
|
|
fxsTtlpN1db(11),
|
|
fxsTtlpN2db(12),
|
|
fxsTtlpN3db(13),
|
|
tTlpNummeric(14)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" In case of FXO, it specifies FXO attenuation and default value is 0dB(fxsTtlp0db).
|
|
In case of FXS this setting controls the amount of gain or loss added
|
|
to a voice signal from CPE before it is encoded to digital PCM.
|
|
To increase the signal level, reduce the TTLP setting to lower value.
|
|
The default is fxsTtlp0db. Ttlpnummeric selects entering the actual
|
|
value in zhoneVaIFCfgTransmitTLPNum."
|
|
::= { zhoneVaIfCfgEntry 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.4
|
|
zhoneVaIfCfgTrunkConditioning OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
idle(2),
|
|
busy(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The trunk conditioning setting specifies whether the FXS/FXO port should send the idle pattern to the network upon declaration of a Carrier Group Alarm(CGA) on the WAN link to which the port is assigned . In most cases leave the trunk conditioning setting at its default setting(off)."
|
|
::= { zhoneVaIfCfgEntry 4 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.5
|
|
zhoneVaIfCfgLineType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fxs(1),
|
|
fxo(2),
|
|
em(3),
|
|
ebs(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Card type FXS, FXO, EM, EBS.
|
|
Entries in the table will be created or deleted on the basis of zhoneVaIfCfgLineType
|
|
in the zhoneVaIfCfgTable and we are not using rowStatus entry for this .
|
|
The tables which are augument to the above mentioned table will be created by RP
|
|
only and they can be read or modified by user later."
|
|
DEFVAL { fxs }
|
|
::= { zhoneVaIfCfgEntry 5 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.6
|
|
zhoneVaIfCfgIntegratedDSP OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the interface has an integrated
|
|
Digital Signal processing (DSP) unit.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneVaIfCfgEntry 6 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.7
|
|
zhoneVaIfCfgLineCapabilities OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
fxs(0),
|
|
fxo(1),
|
|
em(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Interface types supported on this interface. This is a bit-map of possible
|
|
types. This variable can be used to determine zhoneVaIfCfgLineType."
|
|
::= { zhoneVaIfCfgEntry 7 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.8
|
|
zhoneVaIfCfgMaintenanceMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
ifDigitalLoopback(2),
|
|
ifAnalogLoopback(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maintenance modes of the Analog voice interface.
|
|
|
|
|
|
loopback options for Fxo and Fxs cards (Zhone specific)
|
|
-------------------------------------------------------
|
|
CODEC
|
|
T1/E1 DS0 ---------------------------
|
|
<------- <--------------- -----------------
|
|
Network PCM Bus ^ Digital ^
|
|
| to analog Converter|
|
|
| |
|
|
| |
|
|
| |
|
|
Digital loopback Analog loopback
|
|
| |
|
|
-------> -------- ->--------------------------------------------->
|
|
|
|
off(1) - the interface is not in maintenance mode.
|
|
|
|
ifDigitalLoopback(2) This mode is set by the managed system to perform the
|
|
Digital loopback test.
|
|
|
|
ifAnalogLoopback(3) This mode is set by the managed system to perform the
|
|
Analog loopback test. "
|
|
::= { zhoneVaIfCfgEntry 8 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.9
|
|
zhoneVaIfCfgPCMEncoding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
alaw(1),
|
|
mulaw(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"alaw(1) :for E1
|
|
mulaw(2) : for T1 "
|
|
::= { zhoneVaIfCfgEntry 9 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.10
|
|
zhoneVaIfCfgReceiveTLPNum OBJECT-TYPE
|
|
SYNTAX INTEGER (-160..85)
|
|
UNITS "dB/10"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive Transmission Level Point (RTLP) settings control the amount gain or loss added to the incoming signal after it is decoded to analog.
|
|
to incrase the signal level set the RTLP setting to higher values. The default is 0 dB."
|
|
DEFVAL { '0'b }
|
|
::= { zhoneVaIfCfgEntry 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.11
|
|
zhoneVaIfCfgTransmitTLPNum OBJECT-TYPE
|
|
SYNTAX INTEGER (-175..70)
|
|
UNITS "dB/10"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit Transmission Level Point controls the amount of gain or loss added
|
|
to a voice signal from CPE before it is encoded to digital PCM.
|
|
To increase the signal level, reduce the TTLP setting to lower value.
|
|
The default is 0dB."
|
|
DEFVAL { 0 }
|
|
::= { zhoneVaIfCfgEntry 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.12
|
|
zhoneVaIfCfgLoopCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER (20..44)
|
|
UNITS "mA"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To set the loop current value for a subscriber"
|
|
DEFVAL { 30 }
|
|
::= { zhoneVaIfCfgEntry 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.1.1.1.13
|
|
zhoneVaIfCfgRingVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
b85vrms(1),
|
|
b75vrms(2),
|
|
b92vrms(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To set the ring voltage for a subscriber."
|
|
DEFVAL { b85vrms }
|
|
::= { zhoneVaIfCfgEntry 13 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- The Analog Voice Interface Status Table
|
|
-- ****************************************************************************
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.2
|
|
zhoneVaIfStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Analog Voice Status Table. It contains general
|
|
information about the status of Analog Telephony interface
|
|
including the error statistics.
|
|
"
|
|
::= { zhoneVaIfGeneralObjects 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.1.2.1
|
|
zhoneVaIfStatusEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the status table for each Analog voice interface.
|
|
"
|
|
AUGMENTS { zhoneVaIfCfgEntry }
|
|
::= { zhoneVaIfStatusTable 1 }
|
|
|
|
|
|
ZhoneVaIfStatusEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfStatusSignalErrors
|
|
Counter32,
|
|
zhoneVaIfStatusInfoType
|
|
INTEGER
|
|
}
|
|
|
|
-- Not Supported in the current release.
|
|
-- This needs to be changed when this MIB variable is supported.
|
|
-- 1.3.6.1.4.1.5504.5.6.1.2.1.1
|
|
zhoneVaIfStatusSignalErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accumulated number of signaling protocol errors that are
|
|
detected in the interface since system startup."
|
|
::= { zhoneVaIfStatusEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.1.2.1.2
|
|
zhoneVaIfStatusInfoType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notype(1),
|
|
voice(2),
|
|
g3Fax(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information transfer services for the current
|
|
call.
|
|
none - no information transfer service, this is set befgore the first call is made on the interface.
|
|
voice - analog voice.
|
|
g3Fax - Group 3 FAX.
|
|
"
|
|
::= { zhoneVaIfStatusEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2
|
|
zhoneVaIfFXSObjects OBJECT IDENTIFIER ::= { zhoneVaIfObjects 2 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- The Foreign Exchange Station (FXS) Standard Configuration Table
|
|
-- ****************************************************************************
|
|
--
|
|
-- This table is used to configure the FXS signaling type, Ring frequency
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.2.1
|
|
zhoneVaIfFXSCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfFXSCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FXS standard configuration table. It contains
|
|
FXS configuration parameters, one entry per FXS interface.
|
|
The configuration information of this table is set by
|
|
hardware with its default setting or CLI during the hardware
|
|
installation time.
|
|
"
|
|
::= { zhoneVaIfFXSObjects 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2.1.1
|
|
zhoneVaIfFXSCfgEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfFXSCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the standard configuration table for
|
|
each FXS interface."
|
|
INDEX { ifIndex }
|
|
::= { zhoneVaIfFXSCfgTable 1 }
|
|
|
|
|
|
ZhoneVaIfFXSCfgEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfFXSCfgSignalType
|
|
INTEGER,
|
|
zhoneVaIfFXSRingFrequency
|
|
INTEGER,
|
|
zhoneVaIfFXSRingBack
|
|
INTEGER
|
|
}
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.2.1.1.1
|
|
zhoneVaIfFXSCfgSignalType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fxsLoopStart(1),
|
|
fxsGroundStart(2),
|
|
fxsLoopStartFd(3),
|
|
fxsGroundStartAutomatic(4),
|
|
fxsGroundStartImmediate(5),
|
|
fxsdnLoopStart(6),
|
|
fxsdnLoopStartFd(7),
|
|
fxsdnGroundStart(8),
|
|
fxsdnGroundStartImmediate(9),
|
|
fxsdnwinkLoopStart(10),
|
|
fxsdnwinkLoopStartFd(11),
|
|
fxsdnwinkGroundStart(12),
|
|
fxsdnwinkGroundStartImmediate(13),
|
|
fxstr08SingleParty(14),
|
|
fxstr08UniversalVoiceGrade(15),
|
|
fxstr08UniversalVoiceGradeAutomatic(16)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the signaling type of FXS interface.
|
|
fxsLoopStart - loop start.
|
|
fxsGroundStart - ground start.
|
|
fxsLoopStartFd
|
|
fxsGroundStartAutomatic - Used with equipment requiring fast response time to the Central Office.
|
|
fxsGroundStartImmediate - Used with equipment requiring fast response time to the station or PBX.
|
|
fxsdnLoopStart- loop start in fxsdn mode
|
|
fxsdnLoopStartFd
|
|
fxsdnGroundStart- Ground start in fxsdn mode
|
|
fxsdnGroundStartImmediate - Ground start immediate in fxsdn mode
|
|
fxsdnwinkLoopStart - loop start in fxsdnwink (foreign exchange
|
|
subscriber - defined wink start operation) this
|
|
option proved the same type of signalling as
|
|
FXSDN and provides 150 millisecond delay then
|
|
200 ms wink ack to the central office when fxs port sees an off hook condition from central office .
|
|
The system requires a ringing generator for this option.
|
|
fxsdnwinkLoopStartFd
|
|
fxsdnwinkGroundStart- Ground start in FXSDNWINK mode
|
|
fxsdnwinkGroundStartImmediate - Ground start immediate in FXSDNWINK mode.
|
|
fxstr08SingleParty - TR08 is Frame format signalling and data link as defined in TR-TSY-00008 Mode 1
|
|
for circuits using AT & T SLC-96 facilities.
|
|
this option is for single party service ,
|
|
this option connects the port to one way out going trunks from a PBX , CENTEREX, key system , ot telephone set to an SLC channel.
|
|
The SLC96 mode also must be active on the associated WAN interface.
|
|
fxstr08UniversalVoiceGrade - Toll quality voice for SLC-96
|
|
fxstr08UniversalVoiceGradeAutomatic- Used with some non - Bell switches for SLC-96
|
|
|
|
|
|
The default value of this object is fxsLoopStart(1).
|
|
"
|
|
::= { zhoneVaIfFXSCfgEntry 1 }
|
|
|
|
|
|
-- --
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.2.1.1.2
|
|
zhoneVaIfFXSRingFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ringFrequency25(1),
|
|
ringFrequency50(2),
|
|
ringFrequency20(3),
|
|
ringFrequency30(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the ring frequency to be used in the FXS interface.
|
|
ringFrequency25 - ring frequency 25 Hertz.
|
|
ringFrequency50 - ring frequency 50 Hertz.
|
|
ringFrequency20 - ring frequency 20 Hertz.(Default)
|
|
ringFrequency30 - ring frequency 30 Hertz.
|
|
"
|
|
::= { zhoneVaIfFXSCfgEntry 2 }
|
|
|
|
|
|
-- --
|
|
-- 1.3.6.1.4.1.5504.5.6.2.1.1.3
|
|
zhoneVaIfFXSRingBack OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the ring back is requested if this variable is set to on."
|
|
::= { zhoneVaIfFXSCfgEntry 3 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- The Foreign Exchange Station (FXS) interface Status Table
|
|
-- ****************************************************************************
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.2.2
|
|
zhoneVaIfFXSStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfFXSStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Foreign Exchange Station (FXS) interface Status Table.
|
|
It contains hook status, ring active and other states of
|
|
the interface.
|
|
"
|
|
::= { zhoneVaIfFXSObjects 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2.2.1
|
|
zhoneVaIfFXSStatusEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfFXSStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the status table for each FXS interface.
|
|
"
|
|
AUGMENTS { zhoneVaIfFXSCfgEntry }
|
|
::= { zhoneVaIfFXSStatusTable 1 }
|
|
|
|
|
|
ZhoneVaIfFXSStatusEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfFXSHookStatus
|
|
INTEGER,
|
|
zhoneVaIfFXSRingActive
|
|
TruthValue,
|
|
zhoneVaIfFXSRingGround
|
|
TruthValue,
|
|
zhoneVaIfFXSTipGround
|
|
TruthValue
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.2.2.1.1
|
|
zhoneVaIfFXSHookStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
onHook(1),
|
|
offHook(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the hook status of FXS interface.
|
|
onHook - the connected equipment(e.g., phone) is onHook.
|
|
offHook - the connected equipment is offHook.
|
|
"
|
|
::= { zhoneVaIfFXSStatusEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.2.2.1.2
|
|
zhoneVaIfFXSRingActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the outgoing ring active indication. If
|
|
the object value is true, then the interface is currently
|
|
generating ring out to the Key Telephone System (KTS) or
|
|
Plain Old Telephone (POT); otherwise, it doesn't.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneVaIfFXSStatusEntry 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.2.2.1.3
|
|
zhoneVaIfFXSRingGround OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the incoming ring ground indication.
|
|
It is only valid when the zvaIfFXSCfgSignalType is
|
|
fxsGroundStart. If the object is true, then the interface
|
|
is presenting a ring ground to the connected equipment;
|
|
otherwise, it doesn't.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneVaIfFXSStatusEntry 3 }
|
|
|
|
|
|
-- --
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.2.2.1.4
|
|
zhoneVaIfFXSTipGround OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the incoming tip ground indication.
|
|
It is only valid when the zvaIfFXSCfgSignalType is
|
|
fxsGroundStart. If the object is true, then the interface
|
|
is detecting a tip ground at the interface; otherwise,
|
|
it doesn't.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneVaIfFXSStatusEntry 4 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- The FXS Timing Parameters Table
|
|
-- ****************************************************************************
|
|
-- This table contains the FXS interface timing parameters information.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.2.3
|
|
zhoneVaIfFXSTimingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfFXSTimingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FXS interface Timing Parameters table. It
|
|
contains the configuration of the various FXS signaling
|
|
protocol timing parameters.
|
|
"
|
|
::= { zhoneVaIfFXSObjects 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2.3.1
|
|
zhoneVaIfFXSTimingEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfFXSTimingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the FXS Timing Parameters Table for
|
|
each FXS interface."
|
|
AUGMENTS { zhoneVaIfFXSCfgEntry }
|
|
::= { zhoneVaIfFXSTimingTable 1 }
|
|
|
|
|
|
ZhoneVaIfFXSTimingEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfFXSTimingDigitDuration
|
|
Integer32,
|
|
zhoneVaIfFXSTimingInterDigitDuration
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2.3.1.1
|
|
zhoneVaIfFXSTimingDigitDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (50..500)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Outgoing DTMF digit duration in milliseconds.
|
|
The default value of this object is 100 milliseconds.
|
|
|
|
This field is not supported.
|
|
"
|
|
::= { zhoneVaIfFXSTimingEntry 1 }
|
|
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.2.3.1.2
|
|
zhoneVaIfFXSTimingInterDigitDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (50..500)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Outgoing DTMF inter-digit duration in milliseconds.
|
|
The default value of this object is 100 milliseconds.
|
|
|
|
This field is not supported.
|
|
"
|
|
::= { zhoneVaIfFXSTimingEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2.4
|
|
zhonePotsRingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhonePotsRingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table to execute diagnostic potsring command.
|
|
Row in table with non-zero timer will ring pots port.
|
|
Currently, maximum of 4 rows at a time are supported."
|
|
::= { zhoneVaIfFXSObjects 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2.4.1
|
|
zhonePotsRingEntry OBJECT-TYPE
|
|
SYNTAX ZhonePotsRingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"potsring table entry"
|
|
INDEX { zhonePotsRingIfIndex }
|
|
::= { zhonePotsRingTable 1 }
|
|
|
|
|
|
ZhonePotsRingEntry ::=
|
|
SEQUENCE {
|
|
zhonePotsRingIfIndex
|
|
InterfaceIndex,
|
|
zhonePotsRingRingingCadence
|
|
INTEGER,
|
|
zhonePotsRingTimer
|
|
Integer32,
|
|
zhonePotsRingRowStatus
|
|
ZhoneRowStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2.4.1.1
|
|
zhonePotsRingIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Physical pots interface."
|
|
::= { zhonePotsRingEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2.4.1.2
|
|
zhonePotsRingRingingCadence OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ring-cadence-r0(1),
|
|
ring-cadence-r1(2),
|
|
ring-cadence-r2(3),
|
|
ring-cadence-r3(4),
|
|
ring-cadence-r4(5),
|
|
ring-cadence-r5(6),
|
|
ring-cadence-r6(7),
|
|
ring-cadence-r7(8),
|
|
ring-cadence-common(9),
|
|
ring-cadence-splash(10)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Ring cadence to use in test."
|
|
DEFVAL { 9 }
|
|
::= { zhonePotsRingEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2.4.1.3
|
|
zhonePotsRingTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (1..9999)
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Time in seconds to continue ringing."
|
|
DEFVAL { 15 }
|
|
::= { zhonePotsRingEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.2.4.1.4
|
|
zhonePotsRingRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Row status"
|
|
::= { zhonePotsRingEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3
|
|
zhoneVaIfFXOObjects OBJECT IDENTIFIER ::= { zhoneVaIfObjects 3 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- The Foreign Exchange Office (FXO) Standard Configuration Table
|
|
-- ****************************************************************************
|
|
--
|
|
-- This table is used to configure the FXO signaling and number of rings
|
|
-- for the FXO interface.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.3.1
|
|
zhoneVaIfFXOCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfFXOCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FXO standard configuration table. It contains
|
|
FXO configuration parameters, one entry per FXO interface.
|
|
The configuration information of this table is set by
|
|
hardware with its default setting or CLI during the hardware
|
|
installation time.
|
|
"
|
|
::= { zhoneVaIfFXOObjects 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3.1.1
|
|
zhoneVaIfFXOCfgEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfFXOCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the standard configuration table for
|
|
each FXO interface."
|
|
INDEX { ifIndex }
|
|
::= { zhoneVaIfFXOCfgTable 1 }
|
|
|
|
|
|
ZhoneVaIfFXOCfgEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfFXOCfgSignalType
|
|
INTEGER,
|
|
zhoneVaIfFXOCfgNumberRings
|
|
Integer32,
|
|
zhoneVaIfFXOCfgSupDisconnect
|
|
TruthValue,
|
|
zhoneVaIfFXOCfgDialType
|
|
INTEGER
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.3.1.1.1
|
|
zhoneVaIfFXOCfgSignalType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fxoLoopStart(1),
|
|
fxoGroundStart(2),
|
|
fxodpt(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the signaling type of FXO interface.
|
|
fxoLoopStart - loop start.
|
|
fxoGroundStart - ground start.
|
|
fxodpt- Dial Pulse Terminating , this option allows the unit to attach to incoming one way trunks from a PBX , key system or a telephone set..
|
|
The default value of this object is fxoLoopStart(1).
|
|
"
|
|
::= { zhoneVaIfFXOCfgEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3.1.1.2
|
|
zhoneVaIfFXOCfgNumberRings OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of rings detected before closing loop.
|
|
The default value of this object is 1 ring."
|
|
::= { zhoneVaIfFXOCfgEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3.1.1.3
|
|
zhoneVaIfFXOCfgSupDisconnect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Specifies whether a supervisory disconnect signal (CPC) will
|
|
be presented to the interface when the connected party at
|
|
the interface hangs up.
|
|
The default value of this object is 'true'.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneVaIfFXOCfgEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3.1.1.4
|
|
zhoneVaIfFXOCfgDialType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dtmf(1),
|
|
pulse(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the out dialing type of FXO interface.
|
|
dtmf - DTMF digit.
|
|
pulse - pulse.
|
|
The default value of this object is dtmf(1).
|
|
"
|
|
::= { zhoneVaIfFXOCfgEntry 4 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- The Foreign Exchange Office (FXO) interface Status Table
|
|
-- ****************************************************************************
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.3.2
|
|
zhoneVaIfFXOStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfFXOStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Foreign Exchange Office (FXO) interface Status Table.
|
|
It contains hook status, ring detection and other states of
|
|
the interface.
|
|
"
|
|
::= { zhoneVaIfFXOObjects 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3.2.1
|
|
zhoneVaIfFXOStatusEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfFXOStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the status table for each FXO interface.
|
|
"
|
|
AUGMENTS { zhoneVaIfFXOCfgEntry }
|
|
::= { zhoneVaIfFXOStatusTable 1 }
|
|
|
|
|
|
ZhoneVaIfFXOStatusEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfFXOHookStatus
|
|
INTEGER,
|
|
zhoneVaIfFXORingDetect
|
|
TruthValue,
|
|
zhoneVaIfFXORingGround
|
|
TruthValue,
|
|
zhoneVaIfFXOTipGround
|
|
TruthValue
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.3.2.1.1
|
|
zhoneVaIfFXOHookStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
onHook(1),
|
|
offHook(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the hook status of FXO interface.
|
|
onHook - Present the onHook to the connected equipment.
|
|
offHook - Present the offHook to the connected equipment.
|
|
"
|
|
::= { zhoneVaIfFXOStatusEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.3.2.1.2
|
|
zhoneVaIfFXORingDetect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the ring detect indication. If the
|
|
value is true, then the interface detects ring from PBX or
|
|
CO; otherwise, it doesn't."
|
|
DEFVAL { false }
|
|
::= { zhoneVaIfFXOStatusEntry 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.3.2.1.3
|
|
zhoneVaIfFXORingGround OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the incoming ring ground indication.
|
|
It is only valid when the zvaIfFXOCfgSignalType is
|
|
fxoGroundStart. If the object is true, then the interface
|
|
is presenting a ring ground to the connected equipment;
|
|
otherwise, it doesn't.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneVaIfFXOStatusEntry 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.3.2.1.4
|
|
zhoneVaIfFXOTipGround OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the incoming tip ground indication.
|
|
It is only valid when the zvaIfFXOCfgSignalType is
|
|
fxoGroundStart. If the object is true, then the interface
|
|
is detecting a tip ground at the interface; otherwise,
|
|
it doesn't.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneVaIfFXOStatusEntry 4 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- The FXO Timing Parameters Table
|
|
-- ****************************************************************************
|
|
-- This table contains the FXO interface timing parameters information.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.3.3
|
|
zhoneVaIfFXOTimingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfFXOTimingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FXO interface Timing Parameters table. It
|
|
contains the configuration of the various FXO signaling
|
|
protocol timing parameters.
|
|
"
|
|
::= { zhoneVaIfFXOObjects 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3.3.1
|
|
zhoneVaIfFXOTimingEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfFXOTimingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the FXO Timing Parameters Table for
|
|
each FXO interface."
|
|
AUGMENTS { zhoneVaIfFXOCfgEntry }
|
|
::= { zhoneVaIfFXOTimingTable 1 }
|
|
|
|
|
|
ZhoneVaIfFXOTimingEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfFXOTimingDigitDuration
|
|
Integer32,
|
|
zhoneVaIfFXOTimingInterDigitDuration
|
|
Integer32,
|
|
zhoneVaIfFXOTimingPulseRate
|
|
Integer32,
|
|
zhoneVaIfFXOTimingPulseInterDigitDuration
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3.3.1.1
|
|
zhoneVaIfFXOTimingDigitDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (50..500)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Outgoing DTMF digit duration in milliseconds.
|
|
The default value of this object is 100 msec.
|
|
"
|
|
::= { zhoneVaIfFXOTimingEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3.3.1.2
|
|
zhoneVaIfFXOTimingInterDigitDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (50..500)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Outgoing DTMF inter-digit duration in milliseconds.
|
|
The default value of this object is 100 msec.
|
|
"
|
|
::= { zhoneVaIfFXOTimingEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3.3.1.3
|
|
zhoneVaIfFXOTimingPulseRate OBJECT-TYPE
|
|
SYNTAX Integer32 (10..20)
|
|
UNITS "pps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Outgoing pulse dialing rate in pulses per second (pps).
|
|
The default value of this object is 10 pps.
|
|
"
|
|
::= { zhoneVaIfFXOTimingEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.3.3.1.4
|
|
zhoneVaIfFXOTimingPulseInterDigitDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (100..1000)
|
|
UNITS "pps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Outgoing pulse dialing inter-digit timing in milliseconds.
|
|
The default value of this object is 500 milliseconds.
|
|
"
|
|
::= { zhoneVaIfFXOTimingEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4
|
|
zhoneVaIfEMObjects OBJECT IDENTIFIER ::= { zhoneVaIfObjects 4 }
|
|
|
|
|
|
--
|
|
-- ****************************************************************************
|
|
-- The E&M Standard Configuration Table
|
|
-- ****************************************************************************
|
|
--
|
|
-- This table is used to configure the E&M type, signaling, operation,
|
|
-- dial type for the E&M interface.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.4.1
|
|
zhoneVaIfEMCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfEMCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The E&M standard configuration table. It contains
|
|
the current setting of E&M configurable parameters.
|
|
"
|
|
::= { zhoneVaIfEMObjects 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.1.1
|
|
zhoneVaIfEMCfgEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfEMCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the standard configuration table for
|
|
each E&M tie trunk interface."
|
|
INDEX { ifIndex }
|
|
::= { zhoneVaIfEMCfgTable 1 }
|
|
|
|
|
|
ZhoneVaIfEMCfgEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfEMCfgSignalType
|
|
INTEGER,
|
|
zhoneVaIfEMCfgOperation
|
|
INTEGER,
|
|
zhoneVaIfEMCfgType
|
|
INTEGER,
|
|
zhoneVaIfEMCfgDialType
|
|
INTEGER
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.1.1.1
|
|
zhoneVaIfEMCfgSignalType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
winkStart(1),
|
|
immediateDial(2),
|
|
delayDial(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The signaling type of E&M tie trunk interface.
|
|
winkStart - the calling side seizes the line by going
|
|
off-hook on its E lead but waits for a short
|
|
off-hook 'wink' indication on its M lead from
|
|
the called side before sending address
|
|
information as DTMF digits.
|
|
immediateDial - the calling side seizes the line by going
|
|
off-hook on its E lead and sends sends address
|
|
information as DTMF digits.
|
|
delayDial - the calling side seizes the line by going
|
|
off-hook on its E lead. After a timing interval,
|
|
the calling side looks at the supervision
|
|
from the called side. If the supervision is
|
|
on-hook, the calling side starts sending
|
|
information as DTMF digits; otherwise, the calling
|
|
side waits until the called side goes
|
|
on-hook and then starts sending address
|
|
information.
|
|
The default value of this object is winkStart(1).
|
|
"
|
|
REFERENCE
|
|
"EIA/TIA-464B: Sections 4.1.3.4.1 Signaling Protocols.
|
|
"
|
|
::= { zhoneVaIfEMCfgEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.1.1.2
|
|
zhoneVaIfEMCfgOperation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
twoWires(1),
|
|
fourWires(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the operation of the E&M signal.
|
|
twoWires - 2-wire operation.
|
|
fourWires - 4-wire operation.
|
|
The default value of this object is twoWires(1).
|
|
"
|
|
::= { zhoneVaIfEMCfgEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.1.1.3
|
|
zhoneVaIfEMCfgType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
typeI(1),
|
|
typeII(2),
|
|
typeIII(3),
|
|
typeIV(4),
|
|
typeV(5),
|
|
typeIIE(6),
|
|
typeIIM(7),
|
|
typeTO(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the E&M Lead Signaling type.
|
|
LEGEND: V = -48V
|
|
/\/\/ = detector/resister
|
|
X = normally open relay contact
|
|
+ = normally closed relay contact
|
|
G = ground
|
|
SB = Signal Battery
|
|
SG = Signal Ground
|
|
|
|
typeI -
|
|
Leads: E (output, relay to ground)
|
|
M (input, referenced to ground)
|
|
|
|
The tie line equipment (switch/router/etc) generates the
|
|
E-signal to the PBX type grounding the E-lead.
|
|
The tie line equipment detects the M-signal by detecting
|
|
current flow to ground. A common ground must exist
|
|
between the line equipment and the PBX.
|
|
|
|
PBX | TIE LINE
|
|
|
|
|
E: V--/\/\/---|-----X----G
|
|
|
|
|
M: V----X-----|---/\/\/--G
|
|
|
|
typeII -
|
|
Leads: E (output, relay to SG)
|
|
M (input, referenced to ground)
|
|
SB (feed for M, connected to -48V)
|
|
SG (return for E, galvanically isolated from ground)
|
|
|
|
This interface requires no common ground between the
|
|
equipment, thus avoiding ground loop noise problems.
|
|
E-signal is generated toward the PBX by connecting it
|
|
to SG. M-signal is indicated by the PBX connecting
|
|
it to SB. While this interface does NOT require a
|
|
common ground, it does have the tendency to inject
|
|
noise into the audio paths since it is asymmetrical
|
|
with respect to current flow between devices.
|
|
|
|
PBX | TIE LINE
|
|
|
|
|
E: V--/\/\/---|-----X----
|
|
| |
|
|
SG: G----------|----------
|
|
|
|
|
M: ----X-----|---/\/\/--G
|
|
| |
|
|
SB: ----------|----------V
|
|
|
|
typeIII -
|
|
Leads: E (output, relay to ground)
|
|
M (input, referenced to ground)
|
|
SB (connected to -48V)
|
|
SG (connected to ground)
|
|
|
|
This interface operates similar to type I with respect
|
|
to the E-signal. The M-signal, however, is indicated by
|
|
the PBX connecting it to SB on assertion, and alternately
|
|
connecting it to SG during inactivity. Unfortunately, a
|
|
common ground must be shared between the equipment.
|
|
|
|
PBX | TIE LINE
|
|
|
|
|
E: V--/\/\/---|-----X----G
|
|
|
|
|
SG: ----------|----------G
|
|
+ |
|
|
M: ----------|---/\/\/--G
|
|
X |
|
|
SB: ----------|----------V
|
|
|
|
typeIV -
|
|
Leads: E (output, relay to SG)
|
|
M (input, referenced to -48V)
|
|
SB (feed for M, connected to ground)
|
|
SG (return for E, galvanically isolated from ground)
|
|
|
|
This interface is fully symmetrical; it does not require
|
|
a common ground, does not inject noise into audio paths,
|
|
and can be connected back to back by swapping E/SG for
|
|
M/SB. E-signal is indicated to the PBX by connecting it
|
|
to SG. M-signal is provided by the PBX connecting it to
|
|
SB.
|
|
|
|
PBX | TIE LINE
|
|
|
|
|
E: V--/\/\/---|-----X----
|
|
| |
|
|
SG: G----------|----------
|
|
|
|
|
M: ----------|---/\/\/--V
|
|
X |
|
|
SB: ----------|----------G
|
|
|
|
typeV -
|
|
Leads: E (output, relay to ground)
|
|
M (input, referenced to -48V)
|
|
|
|
Type V line equipment indicates E-signal to the PBX by
|
|
grounding the E-lead. The PBX indicates M-signal by
|
|
grounding the M-lead. This interface does require a
|
|
common ground, but does allow back to back connections
|
|
by swapping E for M. This interface is quasi-symmetric
|
|
in that while the line is up, current flow is more or
|
|
less equal between the PBX and line equipment. But noise
|
|
injection is still a problem.
|
|
|
|
PBX | TIE LINE
|
|
|
|
|
E: V--/\/\/---|-----X----G
|
|
|
|
|
M: G-----X----|---/\/\/--V
|
|
|
|
|
The default value of this object is typeI(1).
|
|
"
|
|
REFERENCE
|
|
"EIA/TIA-464B: Sections 4.2.3 E&M Lead Signaling.
|
|
"
|
|
::= { zhoneVaIfEMCfgEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.1.1.4
|
|
zhoneVaIfEMCfgDialType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dtmf(1),
|
|
pulse(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the out dialing type of E&M interface.
|
|
dtmf - DTMF digit.
|
|
pulse - pulse.
|
|
The default value of this object is dtmf(1).
|
|
"
|
|
::= { zhoneVaIfEMCfgEntry 4 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- The E&M interface Status Table
|
|
-- ****************************************************************************
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.4.2
|
|
zhoneVaIfEMStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfEMStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The E&M interface Table. The table contains
|
|
the status of the E&M tie trunk interface.
|
|
"
|
|
::= { zhoneVaIfEMObjects 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.2.1
|
|
zhoneVaIfEMStatusEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfEMStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the status table for each E&M interface.
|
|
"
|
|
AUGMENTS { zhoneVaIfEMCfgEntry }
|
|
::= { zhoneVaIfEMStatusTable 1 }
|
|
|
|
|
|
ZhoneVaIfEMStatusEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfEMInSeizureActive
|
|
TruthValue,
|
|
zhoneVaIfEMOutSeizureActive
|
|
TruthValue
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.2.1.1
|
|
zhoneVaIfEMInSeizureActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the incoming seizure state of the E&M
|
|
interface. If the value is true, then the interface has an
|
|
incoming trunk seizure active; otherwise, it doesn't.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneVaIfEMStatusEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.2.1.2
|
|
zhoneVaIfEMOutSeizureActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the outgoing seizure state of the E&M
|
|
interface. If the value is true, then the interface has an
|
|
outgoing trunk seizure active; otherwise, it doesn't.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneVaIfEMStatusEntry 2 }
|
|
|
|
|
|
-- ****************************************************************************
|
|
-- The E&M Timing Parameters Table
|
|
-- ****************************************************************************
|
|
--
|
|
-- This table contains the E&M interface timing parameters information.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3
|
|
zhoneVaIfEMTimingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVaIfEMTimingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The E&M tie trunk Timing Parameters table. It
|
|
contains the configuration of the various E&M signaling
|
|
protocol timing parameters.
|
|
"
|
|
::= { zhoneVaIfEMObjects 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1
|
|
zhoneVaIfEMTimingEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVaIfEMTimingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the E&M Timing Parameters Table for
|
|
each E&M interface."
|
|
AUGMENTS { zhoneVaIfEMCfgEntry }
|
|
::= { zhoneVaIfEMTimingTable 1 }
|
|
|
|
|
|
ZhoneVaIfEMTimingEntry ::=
|
|
SEQUENCE {
|
|
zhoneVaIfEMTimingDigitDuration
|
|
Integer32,
|
|
zhoneVaIfEMTimingInterDigitDuration
|
|
Integer32,
|
|
zhoneVaIfEMTimingPulseRate
|
|
Integer32,
|
|
zhoneVaIfEMTimingPulseInterDigitDuration
|
|
Integer32,
|
|
zhoneVaIfEMTimingClearWaitDuration
|
|
Integer32,
|
|
zhoneVaIfEMTimingMaxWinkWaitDuration
|
|
Integer32,
|
|
zhoneVaIfEMTimingMaxWinkDuration
|
|
Integer32,
|
|
zhoneVaIfEMTimingDelayStart
|
|
Integer32,
|
|
zhoneVaIfEMTimingMaxDelayDuration
|
|
Integer32,
|
|
zhoneVaIfEMTimingMinDelayPulseWidth
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1.1
|
|
zhoneVaIfEMTimingDigitDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (50..500)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Outgoing DTMF digit duration in milliseconds.
|
|
The default value of this object is 100 milliseconds.
|
|
"
|
|
::= { zhoneVaIfEMTimingEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1.2
|
|
zhoneVaIfEMTimingInterDigitDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (50..500)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Outgoing DTMF inter-digit duration in milliseconds.
|
|
The default value of this object is 100 milliseconds.
|
|
"
|
|
::= { zhoneVaIfEMTimingEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1.3
|
|
zhoneVaIfEMTimingPulseRate OBJECT-TYPE
|
|
SYNTAX Integer32 (10..20)
|
|
UNITS "pps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Outgoing pulse dialing rate in pulses per second (pps).
|
|
The default value of this object is 10 pps.
|
|
"
|
|
::= { zhoneVaIfEMTimingEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1.4
|
|
zhoneVaIfEMTimingPulseInterDigitDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (100..1000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Outgoing Pulse dialing inter-digit timing in milliseconds.
|
|
The default value of this object is 500 milliseconds.
|
|
"
|
|
::= { zhoneVaIfEMTimingEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1.5
|
|
zhoneVaIfEMTimingClearWaitDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (200..2000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time of Inactive seizure signal to declare call cleared.
|
|
The default value of this object is 400 milliseconds."
|
|
::= { zhoneVaIfEMTimingEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1.6
|
|
zhoneVaIfEMTimingMaxWinkWaitDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (100..5000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum time to wait from the outgoing seizure of the line
|
|
to the time of sending out a wink-pulse.
|
|
The default value of this object is 200 milliseconds."
|
|
::= { zhoneVaIfEMTimingEntry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1.7
|
|
zhoneVaIfEMTimingMaxWinkDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (100..3000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum outgoing wink duration (between the wink-pulse leading
|
|
edge and trailing edge) for wink start signaling.
|
|
The default value of this object is 200 milliseconds."
|
|
::= { zhoneVaIfEMTimingEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1.8
|
|
zhoneVaIfEMTimingDelayStart OBJECT-TYPE
|
|
SYNTAX Integer32 (20..2000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum time to wait from outgoing seizure to
|
|
out-dialing digits for delay start signaling.
|
|
The default value of this object is 300 milliseconds.
|
|
"
|
|
::= { zhoneVaIfEMTimingEntry 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1.9
|
|
zhoneVaIfEMTimingMaxDelayDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (100..5000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum time to wait from outgoing seizure to
|
|
out-dialing digits. If the far end does not allow to
|
|
send digits after the duration specified in the object,
|
|
a reorder tone will be sent to the calling party.
|
|
The default value of this object is 2000 milliseconds."
|
|
::= { zhoneVaIfEMTimingEntry 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.5.6.4.3.1.10
|
|
zhoneVaIfEMTimingMinDelayPulseWidth OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 140..5000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum delay-dial pulse duration for incoming call.
|
|
If the value of this object is 0, then no delay-dial
|
|
is sent to the far end for the incoming call.
|
|
The default value of this object is 140 milliseconds."
|
|
::= { zhoneVaIfEMTimingEntry 10 }
|
|
|
|
|
|
|
|
END
|
|
|
|
--
|
|
-- phyVaIf.mib
|
|
--
|