1958 lines
108 KiB
Plaintext
1958 lines
108 KiB
Plaintext
--
|
|
-- comAtm.mib
|
|
-- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 271
|
|
-- Tuesday, April 05, 2005 at 16:59:39
|
|
--
|
|
|
|
ZHONE-COM-ATM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
atmInterfaceDs3PlcpAlarmState, atmInterfaceTCAlarmState, atmTrafficDescrParamEntry, atmVplVpi, atmVplAdminStatus,
|
|
atmVplOperStatus, atmVplLastChange, atmVplReceiveTrafficDescrIndex, atmVplTransmitTrafficDescrIndex, atmVplCrossConnectIdentifier,
|
|
atmVplRowStatus, atmVplCastType, atmVplConnKind, atmVclVpi, atmVclVci,
|
|
atmVclAdminStatus, atmVclOperStatus, atmVclLastChange, atmVclReceiveTrafficDescrIndex, atmVclTransmitTrafficDescrIndex,
|
|
atmVccAalType, atmVccAal5CpcsTransmitSduSize, atmVccAal5CpcsReceiveSduSize, atmVccAal5EncapsType, atmVclCrossConnectIdentifier, atmVclEntry, atmVplEntry, atmInterfaceTCEntry,
|
|
atmVclRowStatus, atmVclCastType, atmVclConnKind, atmVcCrossConnectEntry
|
|
FROM ATM-MIB
|
|
AtmVpIdentifier, AtmVcIdentifier
|
|
FROM ATM-TC-MIB
|
|
ifIndex, InterfaceIndex
|
|
FROM IF-MIB
|
|
OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
IpAddress, Integer32, Counter32, Counter64, OBJECT-TYPE,
|
|
MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
zhoneAtm, zhoneShelfIndex, zhoneSlotIndex, zhoneModules, zhoneShelfIndex,
|
|
zhoneSlotIndex
|
|
FROM Zhone
|
|
ZhoneRowStatus, ZhoneAdminString
|
|
FROM Zhone-TC;
|
|
|
|
-- to generate protection layer code, remove all references to Atm_XStats and run this command:
|
|
-- /vob/zhonetools/bin/pahrser.pl rfc2233.mib rfc2515.mib rfc2514.mib comAtm.mib
|
|
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
comAtmExtension MODULE-IDENTITY
|
|
LAST-UPDATED "200504051200Z" -- April 05, 2005 at 12:00 GMT
|
|
ORGANIZATION
|
|
"Zhone Technologies, Inc."
|
|
CONTACT-INFO
|
|
" Postal:
|
|
Zhone Technologies, Inc.
|
|
@ Zhone Way
|
|
7001 Oakport Street
|
|
Oakland, CA 94621
|
|
USA
|
|
Toll-Free: +1 877-ZHONE20 (+1 877-946-6320)
|
|
Tel: +1-510-777-7000
|
|
Fax: +1-510-777-7001
|
|
E-mail: support@zhone.com"
|
|
DESCRIPTION
|
|
"This is the Zhone module identifier for the Zhone ATM
|
|
MIB extension module."
|
|
REVISION "200504051644Z" -- April 05, 2005 at 16:44 GMT
|
|
DESCRIPTION
|
|
"01.02.18 - Add zhoneAtmVclExtOamF4Ping
|
|
and zhoneAtmVclExtOamF4PingStatus."
|
|
REVISION "200502281318Z" -- February 28, 2005 at 13:18 GMT
|
|
DESCRIPTION
|
|
"01.02.17 - Add field zhoneAtmVpiMaxVciPerVp
|
|
to zhoneAtmVplEntry."
|
|
REVISION "200409071044Z" -- September 07, 2004 at 10:44 GMT
|
|
DESCRIPTION
|
|
"01.02.16 - Deprecate zhonePonExtTable. Move
|
|
traffic-container-index to AtmVplExtensionTable."
|
|
REVISION "200406191015Z" -- June 19, 2004 at 10:15 GMT
|
|
DESCRIPTION
|
|
"01.02.15 - change atm vcl param12 default. "
|
|
REVISION "200401281242Z" -- January 28, 2004 at 12:42 GMT
|
|
DESCRIPTION
|
|
"01.02.14 - Expand atm vcl rates from 16 to 32."
|
|
REVISION "200312041523Z" -- December 04, 2003 at 15:23 GMT
|
|
DESCRIPTION
|
|
"01.02.13 - Fixed zhoneAtmStatsTotalInitialCellsTx spelling Error."
|
|
REVISION "200309091411Z" -- September 09, 2003 at 14:11 GMT
|
|
DESCRIPTION
|
|
"V01.02.12 - Add traffic container index to Atm Vpl Entry augment."
|
|
REVISION "200304161604Z" -- April 16, 2003 at 16:04 GMT
|
|
DESCRIPTION
|
|
"V01.02.11 - Create an object-identifier to encapsulate the atmVclToMulticastMap objects."
|
|
REVISION "200303111346Z" -- March 11, 2003 at 13:46 GMT
|
|
DESCRIPTION
|
|
"V01.02.10 - Fix typo in markup for Atm_Vcl_To_Multicast_Map_Profile."
|
|
REVISION "200302141655Z" -- February 14, 2003 at 16:55 GMT
|
|
DESCRIPTION
|
|
"V01.02.09 - Add Vpi F4 Ping."
|
|
REVISION "200302111330Z" -- February 11, 2003 at 13:30 GMT
|
|
DESCRIPTION
|
|
"V01.02.08 - Add Vcl Multicast."
|
|
REVISION "200208231036Z" -- August 23, 2002 at 10:36 GMT
|
|
DESCRIPTION
|
|
"V01.02.07 - Changed zhoneAtmV2Traps back to
|
|
be zhoneAtmTraps child 0 instead of child 1."
|
|
REVISION "200208131614Z" -- August 13, 2002 at 16:14 GMT
|
|
DESCRIPTION
|
|
"V01.02.06 - Added Vpi auto create notification objects."
|
|
REVISION "200206042013Z" -- June 04, 2002 at 20:13 GMT
|
|
DESCRIPTION
|
|
"V01.02.05 - Added zhoneAtmTrafficDescrParamExtCacDivider
|
|
and zhoneAtmTrafficDescrParamExtUsageParameterControl.
|
|
Also added RowStatus to zhoneAtmVpiTable."
|
|
REVISION "200205281212Z" -- May 28, 2002 at 12:12 GMT
|
|
DESCRIPTION
|
|
"V01.02.04 - added OAM F5 Ping Status Notification."
|
|
REVISION "200205211729Z" -- May 21, 2002 at 17:29 GMT
|
|
DESCRIPTION
|
|
"V01.02.03 - added manual OAM F5 ping support"
|
|
REVISION "200205151729Z" -- May 15, 2002 at 17:29 GMT
|
|
DESCRIPTION
|
|
"V01.02.02 - added ATM VP Support"
|
|
REVISION "200203202019Z" -- March 20, 2002 at 20:19 GMT
|
|
DESCRIPTION
|
|
"V01.02.01 - added ATM VCL Rates"
|
|
REVISION "200112191524Z" -- December 19, 2001 at 15:24 GMT
|
|
DESCRIPTION
|
|
"V01.02.00 -Added Atm Extended Stats Table"
|
|
REVISION "200111021722Z" -- November 02, 2001 at 17:22 GMT
|
|
DESCRIPTION
|
|
"V01.01.02
|
|
- updated description for zhoneAtmTrafficDescrParamExtTrnkVclRate"
|
|
REVISION "200110291734Z" -- October 29, 2001 at 17:34 GMT
|
|
DESCRIPTION
|
|
"V01.01.01
|
|
-Added trap atmVclBandwidthUnavailable, removed unused imported parameters and updated description for zhoneAtmTrafficDescrParamExtTrnkVclRate"
|
|
REVISION "200109201054Z" -- September 20, 2001 at 10:54 GMT
|
|
DESCRIPTION
|
|
"V01.01.00
|
|
-Added zhoneAtmTrafficDescrParamExtTable"
|
|
REVISION "200108301715Z" -- August 30, 2001 at 17:15 GMT
|
|
DESCRIPTION
|
|
"V01.00.02
|
|
- Added traps atmDsx3PlcpAlarmStatusChange and atmInterfaceTCAlarmStateChange"
|
|
REVISION "200108141200Z" -- August 14, 2001 at 12:00 GMT
|
|
DESCRIPTION
|
|
"V01.00.01
|
|
- Correct OBJECTS in the atmVclOperStatusChange trap."
|
|
REVISION "200107111200Z" -- July 11, 2001 at 12:00 GMT
|
|
DESCRIPTION
|
|
"V01.00.00 - Initial Release"
|
|
::= { zhoneModules 25 }
|
|
--
|
|
--
|
|
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2
|
|
zhoneAtmExtension OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Zhone extension MIB tree to the standard ATM
|
|
defined by rfc2515."
|
|
::= { zhoneAtm 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.1
|
|
zhoneAtmVclExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAtmVclExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone extension table for the atmVclTable defined in
|
|
rfc2515."
|
|
::= { zhoneAtmExtension 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.1.1
|
|
zhoneAtmVclExtEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAtmVclExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the atmVclExtTable.
|
|
|
|
atmVclExtEntry is an augmentation to the atmVclEntry
|
|
defined in rfc2515."
|
|
AUGMENTS { atmVclEntry }
|
|
::= { zhoneAtmVclExtTable 1 }
|
|
|
|
ZhoneAtmVclExtEntry ::=
|
|
SEQUENCE {
|
|
zhoneAtmVclExtFaultDetectionType
|
|
INTEGER,
|
|
zhoneAtmVclExtOamF5Ping
|
|
INTEGER,
|
|
zhoneAtmVclExtOamF5PingStatus
|
|
TruthValue,
|
|
zhoneAtmVclExtTrafficContainerIndex
|
|
Integer32,
|
|
zhoneAtmVclExtOamF4Ping
|
|
INTEGER,
|
|
zhoneAtmVclExtOamF4PingStatus
|
|
TruthValue
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.2.1.1.1
|
|
zhoneAtmVclExtFaultDetectionType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
oamF5Loopback(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is used to configure VCL fault detection. The valid values
|
|
are:
|
|
|
|
* disabled - Fault detection is disabled. This is the default.
|
|
* oamF5Loopback - This option uses standard OAM fault
|
|
management cells as defined in ITU.610 for fault detection.
|
|
Automatic loopback diagnostic cells are sent to the IAD.
|
|
|
|
When fault detection is enabled, atmVclOperStatusChange
|
|
notification trap is used to indicate to the NMS station
|
|
an VCL has gone down or has come back up.
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { zhoneAtmVclExtEntry 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.1.1.2
|
|
zhoneAtmVclExtOamF5Ping OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
endToEnd(2),
|
|
segment(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is used to send a OAM F5 loopback cell for fault detection.
|
|
The value will automatically revert to disabled after the set
|
|
is complete. The valid values are:
|
|
|
|
* disabled - OAM F5 loopback cell is not being sent. This is the default.
|
|
* endToEnd - This option uses standard OAM fault management cells as
|
|
defined in ITU.610 for fault detection. Setting this will
|
|
send a OAM F5 end-to-end loopback cell to be sent
|
|
* segment - This is not supported at this time
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { zhoneAtmVclExtEntry 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.1.1.3
|
|
zhoneAtmVclExtOamF5PingStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TRUE if ping was successfull and FALSE if failed"
|
|
::= { zhoneAtmVclExtEntry 3 }
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.2.1.1.4
|
|
zhoneAtmVclExtTrafficContainerIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index number of a PON traffic container associated with a
|
|
VCL definition."
|
|
DEFVAL { 0 }
|
|
::= { zhoneAtmVclExtEntry 4 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.1.1.5
|
|
zhoneAtmVclExtOamF4Ping OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
endToEnd(2),
|
|
segment(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is used to send a OAM F4 loopback cell for fault detection.
|
|
The value will automatically revert to disabled after the set
|
|
is complete. The valid values are:
|
|
|
|
* disabled - OAM F4 loopback cell is not being sent. This is the default.
|
|
* endToEnd - This option uses standard OAM fault management cells as
|
|
defined in ITU.610 for fault detection. Setting this will
|
|
send a OAM F4 end-to-end loopback cell to be sent
|
|
* segment - This is not supported at this time
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { zhoneAtmVclExtEntry 5 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.1.1.6
|
|
zhoneAtmVclExtOamF4PingStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TRUE if ping was successfull and FALSE if failed."
|
|
::= { zhoneAtmVclExtEntry 6 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2
|
|
zhoneAtmTraps OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All the Zhone ATM traps will be defined under this OID."
|
|
::= { zhoneAtmExtension 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2.0
|
|
zhoneAtmV2Traps OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identity adds a zero(0) for the next to last
|
|
sub-identifier which should be used for new SNMPv2 Traps."
|
|
::= { zhoneAtmTraps 0 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2.0.1
|
|
atmVclOperStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { atmVclAdminStatus, atmVclOperStatus, atmVclLastChange }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification is sent when the operational status of an ATM
|
|
VCL changes.
|
|
|
|
The VCL entity is identified by its ifIndex, VPI and VCI
|
|
values in the trap instance OIDs."
|
|
::= { zhoneAtmV2Traps 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2.0.2
|
|
atmDsx3PlcpAlarmStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { atmInterfaceDs3PlcpAlarmState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates if there is an
|
|
alarm present for the DS3 PLCP. "
|
|
::= { zhoneAtmV2Traps 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2.0.3
|
|
atmInterfaceTCAlarmStateChange NOTIFICATION-TYPE
|
|
OBJECTS { atmInterfaceTCAlarmState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that there is an
|
|
alarm present for the TC Sublayer. "
|
|
::= { zhoneAtmV2Traps 3 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2.0.4
|
|
atmVclBandwidthUnavailable NOTIFICATION-TYPE
|
|
OBJECTS { atmVclReceiveTrafficDescrIndex, atmVclTransmitTrafficDescrIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that guranteed bandwidth specified by
|
|
zhoneAtmTrafficDescrParamExtTrnkVclRate in the traffic
|
|
descriptor is not available in the system.
|
|
This is sent when a VCL is activated with the traffic
|
|
descriptor which specifies higher than available rate
|
|
or a VCL is activated with the traffic descriptor
|
|
which specifies the vcl-rate value which can cause
|
|
available bandwidth to run out.
|
|
In this trap, shelf/slot is sent as part of the common
|
|
fields sent in all traps."
|
|
::= { zhoneAtmV2Traps 4 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2.0.5
|
|
atmVplOperStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { atmVplAdminStatus, atmVplOperStatus, atmVplLastChange }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneAtmV2Traps 5 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2.0.6
|
|
atmOamF5PingStatus NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex, atmVpi, atmVci, zhoneAtmVclExtOamF5PingStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification is sent when the OAM F5 Ping succeeds or
|
|
fails. The entity is identified by its ifIndex, VPI and
|
|
VCI values in the trap instance OIDs. A status value of
|
|
true indicates successful Ping, otherwise unsuccessful Ping."
|
|
::= { zhoneAtmV2Traps 6 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2.0.7
|
|
atmVpiAutoCreateComplete NOTIFICATION-TYPE
|
|
OBJECTS { atmVpiAutoCreateDone, atmVpiAutoCreateCount }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification indicating Vpi auto creation is complete."
|
|
::= { zhoneAtmV2Traps 7 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2.0.8
|
|
atmOamF4PingStatus NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex, atmVpi, atmVci, zhoneAtmVpiOamF4PingStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification is sent when the OAM F4 Ping succeeds or
|
|
fails. The entity is identified by its ifIndex, and VPI
|
|
values in the trap instance OIDs. A status value of true
|
|
indicates successful Ping, otherwise unsuccessful Ping."
|
|
::= { zhoneAtmV2Traps 8 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.2.0.9
|
|
atmVclExtOamF4PingStatus NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex, atmVpi, atmVci, zhoneAtmVclExtOamF4PingStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification is sent when the VCL OAM F4 Ping succeeds or
|
|
fails. The entity is identified by its ifIndex, vpi and vci
|
|
values in the trap instance OIDs.
|
|
|
|
zhoneAtmVclExtOamF4PingStatus value of true
|
|
indicates successful Ping, otherwise unsuccessful Ping."
|
|
::= { zhoneAtmV2Traps 9 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3
|
|
zhoneAtmGroups OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone ATM object groups and notification groups will
|
|
be defined under this object identity."
|
|
::= { zhoneAtmExtension 3 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3.1
|
|
zhoneAtmVclExtGroup OBJECT-GROUP
|
|
OBJECTS { zhoneAtmVclExtFaultDetectionType, zhoneAtmVclExtOamF5Ping, zhoneAtmVclExtOamF5PingStatus, zhoneAtmVclExtTrafficContainerIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects contained in the zhoneAtmVclExtTable."
|
|
::= { zhoneAtmGroups 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3.2
|
|
zhoneAtmTrapsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { atmVclOperStatusChange, atmDsx3PlcpAlarmStatusChange, atmInterfaceTCAlarmStateChange, atmVclBandwidthUnavailable, atmVplOperStatusChange,
|
|
atmOamF5PingStatus, atmVpiAutoCreateComplete, atmOamF4PingStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notification traps under the zhoneAtmV2Traps."
|
|
::= { zhoneAtmGroups 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3.3
|
|
zhoneAtmTrafficDescrParamExtGroup OBJECT-GROUP
|
|
OBJECTS { zhoneAtmTrafficDescrParamExtTrnkVclRate, zhoneAtmTrafficDescrParamExtCacDivider, zhoneAtmTrafficDescrParamExtUsageParameterControl }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects contained in the zhoneAtmTrafficDescrParamExtTable."
|
|
::= { zhoneAtmGroups 3 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3.4
|
|
zhoneAtmStatsExtTableGroup OBJECT-GROUP
|
|
OBJECTS { zhoneAtmStatsTotalInitialCellsRx, zhoneAtmStatsTotalFabricCellsRx, zhoneAtmStatsTotalFinalCLP0CellsRx, zhoneAtmStatsTotalFinalCLP1CellsRx, zhoneAtmStatsTotalFabricCellsTx,
|
|
zhoneAtmStatsTotalFinalCLP0CellsTx, zhoneAtmStatsTotalFinalCLP1CellsTx, zhoneAtmStatsTotalInitialCellsTx }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneAtmGroups 4 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3.5
|
|
zhoneAtmVclRateExtParamGroup OBJECT-GROUP
|
|
OBJECTS { zhoneAtmVclRateExtParam1, zhoneAtmVclRateExtParam2, zhoneAtmVclRateExtParam3, zhoneAtmVclRateExtParam4, zhoneAtmVclRateExtParam5,
|
|
zhoneAtmVclRateExtParam6, zhoneAtmVclRateExtParam7, zhoneAtmVclRateExtParam8, zhoneAtmVclRateExtParam9, zhoneAtmVclRateExtParam10,
|
|
zhoneAtmVclRateExtParam11, zhoneAtmVclRateExtParam12, zhoneAtmVclRateExtParam13, zhoneAtmVclRateExtParam14, zhoneAtmVclRateExtParam15,
|
|
zhoneAtmVclRateExtParam16, zhoneAtmVclRateExtParam1Grp2, zhoneAtmVclRateExtParam2Grp2, zhoneAtmVclRateExtParam3Grp2, zhoneAtmVclRateExtParam4Grp2,
|
|
zhoneAtmVclRateExtParam5Grp2, zhoneAtmVclRateExtParam6Grp2, zhoneAtmVclRateExtParam7Grp2, zhoneAtmVclRateExtParam8Grp2, zhoneAtmVclRateExtParam9Grp2,
|
|
zhoneAtmVclRateExtParam10Grp2, zhoneAtmVclRateExtParam11Grp2, zhoneAtmVclRateExtParam12Grp2, zhoneAtmVclRateExtParam13Grp2, zhoneAtmVclRateExtParam14Grp2,
|
|
zhoneAtmVclRateExtParam15Grp2, zhoneAtmVclRateExtParam16Grp2 }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Atm Vcl rate parameter values."
|
|
::= { zhoneAtmGroups 5 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3.6
|
|
zhoneAtmVplExtGroup OBJECT-GROUP
|
|
OBJECTS { zhoneAtmVplExtFaultDetectionType, zhoneAtmVplExtTrafficContainerIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneAtmGroups 6 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3.7
|
|
zhoneAtmConnectionStatsGroup OBJECT-GROUP
|
|
OBJECTS { zhoneAtmConnectionsAvailable, zhoneAtmConnectionsAllocated }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneAtmGroups 7 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3.8
|
|
zhoneAtmVpiGroup OBJECT-GROUP
|
|
OBJECTS { zhoneAtmVpiMaxVci, zhoneAtmVpiSwitched, zhoneAtmVpiRowStatus, atmVpi, atmVci,
|
|
atmVpiAutoCreateDone, atmVpiAutoCreateCount, zhoneAtmVpiOamF4Ping, zhoneAtmVpiOamF4PingStatus, zhoneAtmVpiMaxVciPerVp
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneAtmGroups 8 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3.9
|
|
zhoneAtmPonGroup OBJECT-GROUP
|
|
OBJECTS { zhoneAtmVclPonTrafficContainerIndex, zhoneAtmVplPonTrafficContainerIndex }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneAtmGroups 9 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.3.10
|
|
zhoneAtmVclMulticastGroup OBJECT-GROUP
|
|
OBJECTS { atmVclToMulticastMapIndexNext, atmVclToMulticastMapRoutingDomain, atmVclToMulticastMapMulticastAddress, atmVclToMulticastMapIfIndex, atmVclToMulticastMapVpi,
|
|
atmVclToMulticastMapVci, atmVclToMulticastMapRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneAtmGroups 10 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.4
|
|
zhoneAtmTrafficDescrParamExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAtmTrafficDescrParamExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone extension table for the atmTrafficDescrParamTable
|
|
defined in rfc2515."
|
|
::= { zhoneAtmExtension 4 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.4.1
|
|
zhoneAtmTrafficDescrParamExtEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAtmTrafficDescrParamExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is extension of AtmTrafficDescrParamEntry defined
|
|
in rfc2515."
|
|
AUGMENTS { atmTrafficDescrParamEntry }
|
|
::= { zhoneAtmTrafficDescrParamExtTable 1 }
|
|
|
|
ZhoneAtmTrafficDescrParamExtEntry ::=
|
|
SEQUENCE {
|
|
zhoneAtmTrafficDescrParamExtTrnkVclRate
|
|
INTEGER,
|
|
zhoneAtmTrafficDescrParamExtCacDivider
|
|
Integer32,
|
|
zhoneAtmTrafficDescrParamExtUsageParameterControl
|
|
TruthValue
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.2.4.1.1
|
|
zhoneAtmTrafficDescrParamExtTrnkVclRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unused(1),
|
|
rate16K(2),
|
|
rate32K(3),
|
|
rate64K(4),
|
|
rate80K(5),
|
|
rate128K(6),
|
|
rate160K(7),
|
|
rate256K(8),
|
|
rate320K(9),
|
|
rate512K(10),
|
|
rate640K(11),
|
|
rate1552K(12),
|
|
rate2050K(13),
|
|
rate12M(14),
|
|
rate16M(15),
|
|
rate45M(16),
|
|
rate155M(17),
|
|
rate960K(18),
|
|
rate1280K(19),
|
|
rate1760K(20),
|
|
rate3M(21),
|
|
rate4M(22),
|
|
rate5M(23),
|
|
rate6M(24),
|
|
rate7M(25),
|
|
rate8M(26),
|
|
rate10M(27),
|
|
rate14M(28),
|
|
rate24M(29),
|
|
rate32M(30),
|
|
rate64M(31),
|
|
rate96M(32),
|
|
rate128M(33)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the minimum guaranteed rate
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk Cards. It is applicable only for RTVBR service
|
|
category.
|
|
Unlike switched voice calls in the TDM world we cannot
|
|
oversubscribe bandwidth because all of our voice calls must be
|
|
connected at all times so that we can receive signaling to tell
|
|
us that the phone when off hook. Instead of oversubscribing we
|
|
suggest that the service provide under provision their voice calls.
|
|
An example of this would be a normal good quality voice call over
|
|
ATM requires about 80kb of bandwidth. To share the bandwidth
|
|
resource over several customers the service provider would instead
|
|
allocate (for example) rate16K for a single voice channel, this
|
|
would allow 5 channels to share the bandwidth required to connect
|
|
a good quality voice call. Any value less than rate80K could be
|
|
used if the service provider wished to share bandwidth resources
|
|
over more than one voice call. In order for this method to
|
|
produce a good quality voice call enough bandwidth must be
|
|
unallocated and used in a shared pool by all connections. When the
|
|
buffering is not adequate for a good quality call the connection
|
|
will not terminate, instead the call quality will suffer. Values
|
|
greater than rate80K would be used by devices like a PBX.
|
|
For all service categories other than RTVBR, unused is the only
|
|
valid value.For RTVBR unused is not a valid value and one of the
|
|
rates has to be specified.
|
|
This parameter is used independently for transmit and receive traffic
|
|
based on the traffic descriptor specified for transmit and receive
|
|
in the VCL. Changing this parameter may cause a trap if newly utilized bandwidth
|
|
for a card exceeds its available bandwidth. It may happen on
|
|
multiple cards and therefore there can be multiple traps."
|
|
DEFVAL { unused }
|
|
::= { zhoneAtmTrafficDescrParamExtEntry 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.4.1.2
|
|
zhoneAtmTrafficDescrParamExtCacDivider OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows users to oversubsribe. The
|
|
rate subtracted from CAC is PCR or SCR divided by
|
|
this object."
|
|
DEFVAL { '1'b }
|
|
::= { zhoneAtmTrafficDescrParamExtEntry 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.4.1.3
|
|
zhoneAtmTrafficDescrParamExtUsageParameterControl OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to 'false', this object disables polcing."
|
|
DEFVAL { true }
|
|
::= { zhoneAtmTrafficDescrParamExtEntry 3 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.5
|
|
zhoneAtmStatsExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAtmStatsExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These statistics values are coming from fabric interface."
|
|
::= { zhoneAtmExtension 5 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.5.1
|
|
zhoneAtmStatsExtEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAtmStatsExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Definitions of Forward and Backward:
|
|
|
|
Internal to ATM Switch Fabric
|
|
=============================================================
|
|
|Ext|==>IngressFwd==>| |==>EgressFwd====>|Int|
|
|
PortPhy<->|VC | |APC Switch Fabric| |VC |<->Bus/SAR/DSP
|
|
| |<==EgressBack<==| |<==IngressBack<==| | Phy
|
|
============================================================="
|
|
AUGMENTS { atmVclEntry }
|
|
::= { zhoneAtmStatsExtTable 1 }
|
|
|
|
ZhoneAtmStatsExtEntry ::=
|
|
SEQUENCE {
|
|
zhoneAtmStatsTotalInitialCellsRx
|
|
Counter64,
|
|
zhoneAtmStatsTotalFabricCellsRx
|
|
Counter64,
|
|
zhoneAtmStatsTotalFinalCLP0CellsRx
|
|
Counter64,
|
|
zhoneAtmStatsTotalFinalCLP1CellsRx
|
|
Counter64,
|
|
zhoneAtmStatsTotalInitialCellsTx
|
|
Counter64,
|
|
zhoneAtmStatsTotalFabricCellsTx
|
|
Counter64,
|
|
zhoneAtmStatsTotalFinalCLP0CellsTx
|
|
Counter64,
|
|
zhoneAtmStatsTotalFinalCLP1CellsTx
|
|
Counter64
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.5.1.1
|
|
zhoneAtmStatsTotalInitialCellsRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Initial Cells Received. Total cells received across the
|
|
ingress interface for a given VC, and not discarded by policing
|
|
prior to thresholding (includes CPU insertions but excludes Atm switch fabric
|
|
generated ingress OAM insertions)."
|
|
::= { zhoneAtmStatsExtEntry 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.5.1.2
|
|
zhoneAtmStatsTotalFabricCellsRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Cells Recevied at Fabric.Total cells received across
|
|
the fabric interface for a given VC, including cells discarded
|
|
due to parity errors."
|
|
::= { zhoneAtmStatsExtEntry 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.5.1.3
|
|
zhoneAtmStatsTotalFinalCLP0CellsRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total CLP0 Cells received by fabric. This field
|
|
is setup to monitor egress total cells
|
|
transmitted CLP0."
|
|
::= { zhoneAtmStatsExtEntry 3 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.5.1.4
|
|
zhoneAtmStatsTotalFinalCLP1CellsRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total CLP1 Cells received by fabric. This field
|
|
is setup to monitor egress total cells
|
|
transmitted CLP1."
|
|
::= { zhoneAtmStatsExtEntry 4 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.5.1.5
|
|
zhoneAtmStatsTotalInitialCellsTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Initial Total Cells Transmitted. Total cells transmitted. across the
|
|
ingress interface for a given VC, and not discarded by policing
|
|
prior to thresholding (includes CPU insertions but excludes Atm switch fabric
|
|
generated ingress OAM insertions)."
|
|
::= { zhoneAtmStatsExtEntry 5 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.5.1.6
|
|
zhoneAtmStatsTotalFabricCellsTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total cells transmitted at fabric interace.Total cells transmitted across
|
|
the fabric interface for a given VC, including cells discarded
|
|
due to parity errors."
|
|
::= { zhoneAtmStatsExtEntry 6 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.5.1.7
|
|
zhoneAtmStatsTotalFinalCLP0CellsTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total CLP0 Cells Transmitted. This field
|
|
is setup to monitor egress total cells
|
|
transmitted CLP0."
|
|
::= { zhoneAtmStatsExtEntry 7 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.5.1.8
|
|
zhoneAtmStatsTotalFinalCLP1CellsTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total CLP1 Cells Transmitted. This field
|
|
is setup to monitor egress total cells
|
|
transmitted CLP1."
|
|
::= { zhoneAtmStatsExtEntry 8 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6
|
|
zhoneAtmVclRateExtParam OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Zhone extension MIB tree to the ATM VCL rates."
|
|
::= { zhoneAtmExtension 6 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.1
|
|
zhoneAtmVclRateExtParam1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the first least field of
|
|
total 16 minimum guaranteed rate which is configurable
|
|
by user for a VCL which is bound to this traffic
|
|
descriptor for BAN ATM Trunk or MALC uplink Cards.
|
|
It is applicable only for RTVBR/NRTVBR or CBR
|
|
service category. For RTVBR/NRTVBR service category,
|
|
this value can be set in the rfc2515 td_param2 of
|
|
the traffice descriptor table. For CBR service
|
|
category, this value can be set in the td_param1
|
|
field. The maximum rates capacitiy is 16, any
|
|
value which is not matched in any one of those 16
|
|
rates will be rejected.
|
|
|
|
Unlike switched voice calls in the TDM world we
|
|
cannot oversubscribe bandwidth because all of our
|
|
voice calls must be connected at all times so that
|
|
we can receive signaling to tell us that the phone
|
|
when off hook. Instead of oversubscribing we
|
|
suggest that the service provide under provision
|
|
their voice calls. An example of this would be a
|
|
normal good quality voice call over ATM requires
|
|
about 189 CPS. To share the bandwidth
|
|
resource over several customers the service
|
|
provider would instead
|
|
allocate (for example) 38 CPS for a single voice
|
|
channel, this would allow 5 channels to share the
|
|
bandwidth required to connect a good quality voice
|
|
call. Any value less than 189 CPS could be used if
|
|
the service provider wished to share bandwidth
|
|
resources over more than one voice call. In order
|
|
for this method to produce a good quality voice call
|
|
enough bandwidth must be unallocated and used in a
|
|
shared pool by all connections. When the buffering
|
|
is not adequate for a good quality call the connection
|
|
will not terminate, instead the call quality will
|
|
suffer. Values greater than 189 CPS would be used by
|
|
devices like a PBX. This parameter is used independently
|
|
for transmit and receive traffic based on the traffic
|
|
descriptor specified for transmit and receive in the VCL.
|
|
"
|
|
DEFVAL { 38 }
|
|
::= { zhoneAtmVclRateExtParam 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.2
|
|
zhoneAtmVclRateExtParam2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the second least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 76 }
|
|
::= { zhoneAtmVclRateExtParam 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.3
|
|
zhoneAtmVclRateExtParam3 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the third least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 151 }
|
|
::= { zhoneAtmVclRateExtParam 3 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.4
|
|
zhoneAtmVclRateExtParam4 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the fourth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 189 }
|
|
::= { zhoneAtmVclRateExtParam 4 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.5
|
|
zhoneAtmVclRateExtParam5 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the fifth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 302 }
|
|
::= { zhoneAtmVclRateExtParam 5 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.6
|
|
zhoneAtmVclRateExtParam6 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the sixth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 378 }
|
|
::= { zhoneAtmVclRateExtParam 6 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.7
|
|
zhoneAtmVclRateExtParam7 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the seventh least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 604 }
|
|
::= { zhoneAtmVclRateExtParam 7 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.8
|
|
zhoneAtmVclRateExtParam8 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the eighth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 755 }
|
|
::= { zhoneAtmVclRateExtParam 8 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.9
|
|
zhoneAtmVclRateExtParam9 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the ninth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 1208 }
|
|
::= { zhoneAtmVclRateExtParam 9 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.10
|
|
zhoneAtmVclRateExtParam10 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the tenth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 1510 }
|
|
::= { zhoneAtmVclRateExtParam 10 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.11
|
|
zhoneAtmVclRateExtParam11 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the eleventh least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 3661 }
|
|
::= { zhoneAtmVclRateExtParam 11 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.12
|
|
zhoneAtmVclRateExtParam12 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the twelfth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 4825 }
|
|
::= { zhoneAtmVclRateExtParam 12 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.13
|
|
zhoneAtmVclRateExtParam13 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the thirteenth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 28302 }
|
|
::= { zhoneAtmVclRateExtParam 13 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.14
|
|
zhoneAtmVclRateExtParam14 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the fouthteenth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 37736 }
|
|
::= { zhoneAtmVclRateExtParam 14 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.15
|
|
zhoneAtmVclRateExtParam15 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the fifteenth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 106133 }
|
|
::= { zhoneAtmVclRateExtParam 15 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.16
|
|
zhoneAtmVclRateExtParam16 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the sixteenth least field of total 16
|
|
minimum guaranteed rate which is configurable by user
|
|
for a VCL which is bound to this traffic descriptor for BAN
|
|
ATM Trunk or MALC uplink Cards."
|
|
DEFVAL { 365567 }
|
|
::= { zhoneAtmVclRateExtParam 16 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.17
|
|
zhoneAtmVclRateExtParam1Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the first least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 2264 }
|
|
::= { zhoneAtmVclRateExtParam 17 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.18
|
|
zhoneAtmVclRateExtParam2Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the second least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 3019 }
|
|
::= { zhoneAtmVclRateExtParam 18 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.19
|
|
zhoneAtmVclRateExtParam3Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the third least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 4151 }
|
|
::= { zhoneAtmVclRateExtParam 19 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.20
|
|
zhoneAtmVclRateExtParam4Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the fourth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 7075 }
|
|
::= { zhoneAtmVclRateExtParam 20 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.21
|
|
zhoneAtmVclRateExtParam5Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the fifth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 9434 }
|
|
::= { zhoneAtmVclRateExtParam 21 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.22
|
|
zhoneAtmVclRateExtParam6Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the sixth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 11792 }
|
|
::= { zhoneAtmVclRateExtParam 22 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.23
|
|
zhoneAtmVclRateExtParam7Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the seventh least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 14151 }
|
|
::= { zhoneAtmVclRateExtParam 23 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.24
|
|
zhoneAtmVclRateExtParam8Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the eighth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 16509 }
|
|
::= { zhoneAtmVclRateExtParam 24 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.25
|
|
zhoneAtmVclRateExtParam9Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the ninth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 18868 }
|
|
::= { zhoneAtmVclRateExtParam 25 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.26
|
|
zhoneAtmVclRateExtParam10Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the tenth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 23585 }
|
|
::= { zhoneAtmVclRateExtParam 26 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.27
|
|
zhoneAtmVclRateExtParam11Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the eleventh least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 33019 }
|
|
::= { zhoneAtmVclRateExtParam 27 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.28
|
|
zhoneAtmVclRateExtParam12Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the twelfth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 56604 }
|
|
::= { zhoneAtmVclRateExtParam 28 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.29
|
|
zhoneAtmVclRateExtParam13Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the thirteenth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 75472 }
|
|
::= { zhoneAtmVclRateExtParam 29 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.30
|
|
zhoneAtmVclRateExtParam14Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the fourteenth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 150943 }
|
|
::= { zhoneAtmVclRateExtParam 30 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.31
|
|
zhoneAtmVclRateExtParam15Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the fifthteenth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 226415 }
|
|
::= { zhoneAtmVclRateExtParam 31 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.6.32
|
|
zhoneAtmVclRateExtParam16Grp2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to describe the sixthteenth least
|
|
field of total 16 minimum guaranteed rate which
|
|
is configurable by user for a VCL which is bound
|
|
to this traffic descriptor for BAN ATM Trunk or
|
|
MALC uplink Cards."
|
|
DEFVAL { 301887 }
|
|
::= { zhoneAtmVclRateExtParam 32 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.7
|
|
zhoneAtmVplExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAtmVplExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone extension table for the atmVplTable defined in
|
|
rfc2515.
|
|
|
|
"
|
|
::= { zhoneAtmExtension 7 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.7.1
|
|
zhoneAtmVplExtEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAtmVplExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NOT CURRENTLY IMPLEMENTED.
|
|
|
|
An entry in the atmVplExtTable.
|
|
|
|
atmVplExtEntry is an augmentation to the atmVplEntry
|
|
defined in rfc2515."
|
|
AUGMENTS { atmVplEntry }
|
|
::= { zhoneAtmVplExtTable 1 }
|
|
|
|
ZhoneAtmVplExtEntry ::=
|
|
SEQUENCE {
|
|
zhoneAtmVplExtFaultDetectionType
|
|
INTEGER,
|
|
zhoneAtmVplExtTrafficContainerIndex
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.7.1.1
|
|
zhoneAtmVplExtFaultDetectionType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
oamF4Loopback(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NOT CURRENTLY IMPLEMENTED.
|
|
|
|
This is used to configure VPL fault detection.
|
|
|
|
The valid values are:
|
|
|
|
* disabled - Fault detection is disabled.
|
|
This is the default.
|
|
* oamF4Loopback - This option uses standard OAM fault
|
|
management cells as defined in ITU.610 for fault detection.
|
|
Automatic loopback diagnostic cells are sent to the IAD.
|
|
|
|
When fault detection is enabled, atmVplOperStatusChange
|
|
notification trap is used to indicate to the NMS station
|
|
that a VPL has gone down or has come back up.
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { zhoneAtmVplExtEntry 1 }
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.2.7.1.2
|
|
zhoneAtmVplExtTrafficContainerIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index number of a PON traffic container associated with a
|
|
VPL definition.
|
|
|
|
NOTE: MULTIPLE VARBINDS ACROSS THE VPL TABLE AND
|
|
THE VPL EXTENSI0N TABLE ARE NOT ALLOWED! It turns out that
|
|
anyone trying to set just the traffic container index would
|
|
inadvertantly try to create a Vpl with default settings.
|
|
To set the traffic container field, the Vpl must be created
|
|
first."
|
|
DEFVAL { 0 }
|
|
::= { zhoneAtmVplExtEntry 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.8
|
|
zhoneAtmConnectionStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAtmConnectionStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table which describes the allocated and available ATM
|
|
connections on a Zhone device."
|
|
::= { zhoneAtmExtension 8 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.8.1
|
|
zhoneAtmConnectionStatsEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAtmConnectionStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry based on shelf/slot which describes the
|
|
total allocated and available ATM connections for
|
|
that shelf/slot."
|
|
INDEX { zhoneShelfIndex, zhoneSlotIndex }
|
|
::= { zhoneAtmConnectionStatsTable 1 }
|
|
|
|
ZhoneAtmConnectionStatsEntry ::=
|
|
SEQUENCE {
|
|
zhoneAtmConnectionsAvailable
|
|
Integer32,
|
|
zhoneAtmConnectionsAllocated
|
|
Integer32
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.2.8.1.1
|
|
zhoneAtmConnectionsAvailable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total available ATM connections for a particular
|
|
shelf/slot.
|
|
|
|
This number is hardware dependent.
|
|
|
|
Whenever a VPI is allocated for a particular shelf/slot,
|
|
the number of connections allocated for that VPI is
|
|
subtracted from the total available and is returned
|
|
in this value."
|
|
::= { zhoneAtmConnectionStatsEntry 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.8.1.2
|
|
zhoneAtmConnectionsAllocated OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total allocated ATM connections for a particular
|
|
shelf/slot.
|
|
|
|
For a particular VPI, we calculate the number of
|
|
connections allocated by the following rule:
|
|
|
|
A VP Switched VPI has a Max VCI of 0 and uses 3 connections.
|
|
|
|
A VC Switched VPI has a Max VCI of n (the number n is a
|
|
power of 2 and is user selected) and uses n connections.
|
|
|
|
The sum of all allocated connections for all VPIs on
|
|
the selected shelf/slot is the number returned for
|
|
this value."
|
|
::= { zhoneAtmConnectionStatsEntry 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.9
|
|
zhoneAtmVpiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAtmVpiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table which describes attributes associated to a
|
|
particular VPI.
|
|
|
|
Anytime you add to, delete from or modify any entry
|
|
in this table, you must reboot the card in order for
|
|
these changes to take effect. The reason for this is
|
|
that the APC must be re-programmed and the only way
|
|
to do this is by doing a reboot.
|
|
|
|
In addition, you will not be allowed to modify, create
|
|
or delete any atm-vcl entry which is on the same card
|
|
as the VPI until after the card has been rebooted."
|
|
::= { zhoneAtmExtension 9 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.9.1
|
|
zhoneAtmVpiEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAtmVpiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry based on ifIndex/vpi (which resolves to a
|
|
particular shelf/slot/port/subport/type/vpi) which
|
|
contains the maximum VCI value and the switch mode
|
|
(either vp or vc switched) for a particular VPI."
|
|
INDEX { ifIndex, atmVplVpi }
|
|
::= { zhoneAtmVpiTable 1 }
|
|
|
|
ZhoneAtmVpiEntry ::=
|
|
SEQUENCE {
|
|
zhoneAtmVpiMaxVci
|
|
Integer32,
|
|
zhoneAtmVpiSwitched
|
|
INTEGER,
|
|
zhoneAtmVpiRowStatus
|
|
ZhoneRowStatus,
|
|
zhoneAtmVpiOamF4Ping
|
|
INTEGER,
|
|
zhoneAtmVpiOamF4PingStatus
|
|
TruthValue,
|
|
zhoneAtmVpiMaxVciPerVp
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.9.1.1
|
|
zhoneAtmVpiMaxVci OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For the selected VPI, this value contains the maximum
|
|
VCI.
|
|
|
|
For vp switched VPIs, this value must be zero.
|
|
|
|
For vc switched VPIs, this value must be a power of 2
|
|
with its maximum value being hardware dependent."
|
|
DEFVAL { 0 }
|
|
::= { zhoneAtmVpiEntry 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.9.1.2
|
|
zhoneAtmVpiSwitched OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
vp(1),
|
|
vc(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For the selected VPI, this value can be set to either
|
|
vp switched or vc switched.
|
|
|
|
If it is vp switched, then the max vci must be zero.
|
|
|
|
If it is vc switched, the max vci value must be a
|
|
power of 2 with its maximum value being hardware
|
|
dependent."
|
|
DEFVAL { vp }
|
|
::= { zhoneAtmVpiEntry 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.9.1.3
|
|
zhoneAtmVpiRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status only supports create-and-go and destroy actions.
|
|
Returns active if row is in service."
|
|
::= { zhoneAtmVpiEntry 3 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.9.1.4
|
|
zhoneAtmVpiOamF4Ping OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
endToEnd(2),
|
|
segment(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is used to send a OAM F4 loopback cell for fault detection.
|
|
The value will automatically revert to disabled after the set
|
|
is complete. The valid values are:
|
|
|
|
* disabled - OAM F4 loopback cell is not being sent. This is the default.
|
|
* endToEnd - This option uses standard OAM fault management cells as
|
|
defined in ITU.610 for fault detection. Setting this will
|
|
send a OAM F4 end-to-end loopback cell to be sent
|
|
* segment - This is not supported at this time
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { zhoneAtmVpiEntry 4 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.9.1.5
|
|
zhoneAtmVpiOamF4PingStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TRUE if ping was successfull and FALSE if failed."
|
|
::= { zhoneAtmVpiEntry 5 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.9.1.6
|
|
zhoneAtmVpiMaxVciPerVp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If vp-switched, but VG connection is vc-switched,
|
|
this specifies max number of vci on gateway."
|
|
::= { zhoneAtmVpiEntry 6 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.10
|
|
atmVpi OBJECT-TYPE
|
|
SYNTAX AtmVpIdentifier
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI used for traps defined under atm traps"
|
|
::= { zhoneAtmExtension 10 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.11
|
|
atmVci OBJECT-TYPE
|
|
SYNTAX AtmVcIdentifier
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI used for traps defined under atm traps"
|
|
::= { zhoneAtmExtension 11 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.12
|
|
atmVpiAutoCreateDone OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates automatic Vpi generation complete."
|
|
::= { zhoneAtmExtension 12 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.13
|
|
atmVpiAutoCreateCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the count of the number of auto-created Vpis."
|
|
::= { zhoneAtmExtension 13 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16
|
|
atmVclToMulticastMap OBJECT IDENTIFIER ::= { zhoneAtmExtension 16 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16.1
|
|
atmVclToMulticastMapIndexNext OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used
|
|
for atmMulticastAddressVclMapIndex when creating
|
|
entries in the atmMulticastAddressVclMapTable. The
|
|
value 0 indicates that no unassigned entries are
|
|
available. To obtain the atmMulticastAddressVclMapIndex
|
|
value for a new entry, the manager issues a management
|
|
protocol retrieval operation to obtain the current value
|
|
of this object. After each retrieval, the agent should
|
|
modify the value to the next unassigned index.
|
|
|
|
After a manager retrieves a value the agent will
|
|
determine through its local policy when this index
|
|
value will be made available for reuse."
|
|
::= { atmVclToMulticastMap 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16.2
|
|
atmVclToMulticastMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmVclToMulticastMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Multicast Address to Vcl Mapping table. Each
|
|
entry in this table associates a multicast address
|
|
representing a video stream with a Vcl. All of the
|
|
entries in this table are assumed to be unique, not
|
|
only in terms of index, but in terms of (index,
|
|
multicast address) <-> (ifIndex, vpi, vci).
|
|
|
|
Note that the Vcl type for this table should always
|
|
be 'other', denoting cell relay pass-through. We
|
|
are not terminating the IP stream on the MALC.
|
|
|
|
Also note that the Vcls that this table refer to
|
|
are the ones originating at the Video Head-End,
|
|
coming into the MALC Uplink card."
|
|
::= { atmVclToMulticastMap 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16.2.1
|
|
atmVclToMulticastMapEntry OBJECT-TYPE
|
|
SYNTAX AtmVclToMulticastMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Multicast Address to Vcl Mapping table.
|
|
This entry is used to associate a multicast address with
|
|
a Vcl.
|
|
|
|
Step-wise Procedures to set up a Multicast Vcl Mapping profile
|
|
|
|
Once the Vcl that carries the video stream is created, the
|
|
following steps are taken to provision a Multicast Address
|
|
to Vcl Mapping:
|
|
|
|
(1) The manager obtains a unique atmMulticastAddressVclMapIndex
|
|
by reading the atmMulticastAddressVclMapIndexNext object.
|
|
|
|
(2) Next, the manager creates a row in the
|
|
atmMulticastAddressVclMapTable by setting
|
|
atmMulticastAddressVclMapRowStatus to createAndGo.
|
|
The agent checks the sanity of the Vcl, domain index,
|
|
and multicast address. The row creation fails if:
|
|
- the specified Vcl does not exist,
|
|
- the specified Vcl is not of the correct type for
|
|
multicasting,
|
|
- the routing domain index is outside of the supported range,
|
|
- the multicast address is not of the correct format.
|
|
(3) The manager promotes the row in the
|
|
atmMulticastAddressVclMapTable when the 'set' completes."
|
|
INDEX { atmVclToMulticastMapIndex }
|
|
::= { atmVclToMulticastMapTable 1 }
|
|
|
|
AtmVclToMulticastMapEntry ::=
|
|
SEQUENCE {
|
|
atmVclToMulticastMapIndex
|
|
INTEGER,
|
|
atmVclToMulticastMapRoutingDomain
|
|
INTEGER,
|
|
atmVclToMulticastMapMulticastAddress
|
|
IpAddress,
|
|
atmVclToMulticastMapIfIndex
|
|
InterfaceIndex,
|
|
atmVclToMulticastMapVpi
|
|
AtmVpIdentifier,
|
|
atmVclToMulticastMapVci
|
|
AtmVcIdentifier,
|
|
atmVclToMulticastMapRowStatus
|
|
ZhoneRowStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16.2.1.1
|
|
atmVclToMulticastMapIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value to identify this Multicast Address to
|
|
Vcl mapping."
|
|
::= { atmVclToMulticastMapEntry 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16.2.1.2
|
|
atmVclToMulticastMapRoutingDomain OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Routing domain of the Head-End video server."
|
|
::= { atmVclToMulticastMapEntry 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16.2.1.3
|
|
atmVclToMulticastMapMulticastAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast IP address contained in the MPEG2 video stream."
|
|
::= { atmVclToMulticastMapEntry 3 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16.2.1.4
|
|
atmVclToMulticastMapIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the ATM interface for the Vcl
|
|
carrying a video stream."
|
|
::= { atmVclToMulticastMapEntry 4 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16.2.1.5
|
|
atmVclToMulticastMapVpi OBJECT-TYPE
|
|
SYNTAX AtmVpIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPI value of the ATM interface for the Vcl
|
|
carrying a video stream."
|
|
::= { atmVclToMulticastMapEntry 5 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16.2.1.6
|
|
atmVclToMulticastMapVci OBJECT-TYPE
|
|
SYNTAX AtmVcIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VCI value of the ATM interface for the Vcl
|
|
carrying a video stream."
|
|
::= { atmVclToMulticastMapEntry 6 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.16.2.1.7
|
|
atmVclToMulticastMapRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status of the multicast address to Vcl table entry.
|
|
This object must be initially set to 'createAndGo'."
|
|
::= { atmVclToMulticastMapEntry 7 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.17
|
|
zhoneAtmPonExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAtmPonExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This is the Zhone extension to the Atm Vcl Table (rfc2515.)
|
|
It contains APON-related objects."
|
|
::= { zhoneAtmExtension 17 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.17.1
|
|
zhoneAtmPonExtEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAtmPonExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This is an entry in the Atm PON Extension table."
|
|
AUGMENTS { atmVclEntry }
|
|
::= { zhoneAtmPonExtTable 1 }
|
|
|
|
ZhoneAtmPonExtEntry ::=
|
|
SEQUENCE {
|
|
zhoneAtmVclPonTrafficContainerIndex
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.17.1.1
|
|
zhoneAtmVclPonTrafficContainerIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This field is an index into the ATM PON Traffic Container table.
|
|
It associated a Vcl with a Traffic Container, and is used to
|
|
retrieve PON channel provisioning information."
|
|
DEFVAL { 0 }
|
|
::= { zhoneAtmPonExtEntry 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.18
|
|
zhoneAtmVplPonExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAtmVplPonExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This is the Zhone extension to the Atm Vpl Table (rfc2515.)
|
|
It contains APON-related objects."
|
|
::= { zhoneAtmExtension 18 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.18.1
|
|
zhoneAtmVplPonExtEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAtmVplPonExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This is an entry in the Atm PON Extension table."
|
|
AUGMENTS { atmVplEntry }
|
|
::= { zhoneAtmVplPonExtTable 1 }
|
|
|
|
ZhoneAtmVplPonExtEntry ::=
|
|
SEQUENCE {
|
|
zhoneAtmVplPonTrafficContainerIndex
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.18.1.1
|
|
zhoneAtmVplPonTrafficContainerIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This field is an index into the ATM PON Traffic Container table.
|
|
It associated a Vpl with a Traffic Container, and is used to
|
|
retrieve PON channel provisioning information."
|
|
DEFVAL { 0 }
|
|
::= { zhoneAtmVplPonExtEntry 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.19
|
|
zhoneAtmInterfaceTcExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAtmInterfaceTcExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains ATM interface TC
|
|
Sublayer parameters and state variables,
|
|
one entry per ATM interface port."
|
|
::= { zhoneAtmExtension 19 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.19.1
|
|
zhoneAtmInterfaceTcExtEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAtmInterfaceTcExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This list contains TC Sublayer parameters
|
|
and state variables at the ATM interface and is
|
|
indexed by the ifIndex value of the ATM interface."
|
|
AUGMENTS { atmInterfaceTCEntry }
|
|
::= { zhoneAtmInterfaceTcExtTable 1 }
|
|
|
|
ZhoneAtmInterfaceTcExtEntry ::=
|
|
SEQUENCE {
|
|
zhoneAtmInterfaceNCDEvents
|
|
Counter32,
|
|
zhoneAtmInterfaceHECEvents
|
|
Counter32,
|
|
zhoneAtmInterfaceFeOCDEvents
|
|
Counter32,
|
|
zhoneAtmInterfaceFeNCDEvents
|
|
Counter32,
|
|
zhoneAtmInterfaceFeHECEvents
|
|
Counter32
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.2.19.1.1
|
|
zhoneAtmInterfaceNCDEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the Near-end No Cell Delineation (NCD) events occur. "
|
|
::= { zhoneAtmInterfaceTcExtEntry 1 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.19.1.2
|
|
zhoneAtmInterfaceHECEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times Near-end Header Error Control (HEC) violations
|
|
occur. "
|
|
::= { zhoneAtmInterfaceTcExtEntry 2 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.19.1.3
|
|
zhoneAtmInterfaceFeOCDEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times Far-end Out of Cell Delineation (OCD) events occur. "
|
|
::= { zhoneAtmInterfaceTcExtEntry 3 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.19.1.4
|
|
zhoneAtmInterfaceFeNCDEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times Far-end No Cell Delineation (NCD) events
|
|
occur. "
|
|
::= { zhoneAtmInterfaceTcExtEntry 4 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.19.1.5
|
|
zhoneAtmInterfaceFeHECEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times Far-end Header Error Control (HEC) violations
|
|
occur. "
|
|
::= { zhoneAtmInterfaceTcExtEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.20
|
|
zhoneAtmVcCrossConnectExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAtmVcCrossConnectExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Table contains Atm Vc Cross Connect Extensions
|
|
to the atmVcCrossConnectEntry."
|
|
::= { zhoneAtmExtension 20 }
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.20.1
|
|
zhoneAtmVcCrossConnectExtEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAtmVcCrossConnectExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This list contains Atm Vc Cross Connect Extensions
|
|
to the atmVcCrossConnectEntry."
|
|
AUGMENTS { atmVcCrossConnectEntry }
|
|
::= { zhoneAtmVcCrossConnectExtTable 1 }
|
|
|
|
ZhoneAtmVcCrossConnectExtEntry ::=
|
|
SEQUENCE {
|
|
zhoneAtmVcCrossConnectExtHandleId
|
|
OCTET STRING
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.2.20.1.1
|
|
zhoneAtmVcCrossConnectExtHandleId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An administratively-assigned name for the
|
|
Atm Vc Cross Connect indicated by the INDEX
|
|
value."
|
|
::= { zhoneAtmVcCrossConnectExtEntry 1 }
|
|
|
|
END
|
|
|
|
--
|
|
-- comAtm.mib
|
|
--
|