1222 lines
38 KiB
Plaintext
1222 lines
38 KiB
Plaintext
|
|
-- Copyright (C) 2010-2012 by Zhone Technologies. All Rights Reserved.
|
|
|
|
-- ======================================================================
|
|
-- == ==
|
|
-- == ZHNLAYER2BRIDGING MIB ==
|
|
-- == ==
|
|
-- == Copyright (C) 2010-2012 Zhone Technologies, Inc. ==
|
|
-- == Confidential, Unpublished Property of Zhone Technologies. ==
|
|
-- == Rights Reserved Under the Copyright Laws of the United States. ==
|
|
-- == ==
|
|
-- ======================================================================
|
|
|
|
ZHNLAYER2BRIDGING DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY , OBJECT-TYPE , enterprises,
|
|
Integer32, Unsigned32, IpAddress
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION, MacAddress, TruthValue
|
|
FROM SNMPv2-TC
|
|
ZhoneRowStatus
|
|
FROM Zhone-TC
|
|
ifIndex, InterfaceIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
zhoneWtn
|
|
FROM Zhone;
|
|
|
|
-- 1.3.6.1.4.1.5504.2.5.42
|
|
zhnLayer2Bridging MODULE-IDENTITY
|
|
LAST-UPDATED "201207111200Z" -- July 11, 2012
|
|
ORGANIZATION
|
|
"Zhone Technologies, Inc."
|
|
CONTACT-INFO
|
|
"Zhone Technologies, Inc.
|
|
Florida Design Center
|
|
8545 126th Avenue North
|
|
Largo, FL 33773
|
|
|
|
Toll-Free: +1 877-ZHONE20 (+1 877-946-6320)
|
|
Tel: +1-510-777-7000
|
|
Fax: +1-510-777-7001
|
|
E-mail: support@zhone.com"
|
|
|
|
|
|
DESCRIPTION
|
|
"This file defines the private Enterprise MIB extensions
|
|
that define Layer 2 Bridging objects supported by the
|
|
Zhone VoIP CPEs. "
|
|
|
|
REVISION "201207111200Z" -- July 11, 2012
|
|
DESCRIPTION "Changed vlanIDType to read-only"
|
|
|
|
REVISION "201206211200Z" -- June 21, 2012
|
|
DESCRIPTION "Moved OMCI from VlanTypeValues to VlanIDType"
|
|
|
|
REVISION "201206051200Z" -- June 5, 2012
|
|
DESCRIPTION "Updated VlanTypeValues"
|
|
|
|
REVISION "201205161200Z" -- May 16, 2012
|
|
DESCRIPTION "Renamed filterTable to filterBridgeTable"
|
|
|
|
REVISION "201201261200Z" -- Jan 26, 2012
|
|
DESCRIPTION "Added layer2BridgingGlobalObjects"
|
|
|
|
REVISION "201101110000Z" -- Jan 11, 2011
|
|
DESCRIPTION "General file cleanup and fixed MIB compilation errors."
|
|
|
|
REVISION "201008100000Z" -- Aug 10, 2010
|
|
DESCRIPTION "Removed pppoeEnabledUplink object from BridgeTable."
|
|
|
|
REVISION "201004010000Z" -- Apr 01, 2010
|
|
DESCRIPTION "First Draft"
|
|
|
|
::= { zhoneWtn 42 }
|
|
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.2.5.42.1
|
|
layer2BridgingObjects OBJECT IDENTIFIER ::= { zhnLayer2Bridging 1 }
|
|
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
BridgeEntryStatusValues ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Status of an entry in the bridge, filter or marking tables.
|
|
List of supported strings:
|
|
Disabled
|
|
Enabled
|
|
Error
|
|
"
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
|
|
|
|
VlanTypeValues ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Type of VLAN associated with a bridge table entry.
|
|
List of supported strings:
|
|
Unknown
|
|
Bridged
|
|
Routed
|
|
TLS-Bridged
|
|
PPPoE_Routed
|
|
PPPoE_Bridged
|
|
BRouted
|
|
PWE-Bridged
|
|
"
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
|
|
|
|
VlanSecureType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Secure setting for a VLAN associated with a bridge table entry.
|
|
List of supported strings:
|
|
Disable - indicates traffic will be bridged normally.
|
|
Enable - indicates all outgoing traffic will be forced out the uplink.
|
|
Unknown - indicates the secure settined has not been configured.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
|
|
|
|
VlanIDType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Type of VLAN port membership.
|
|
List of supported strings:
|
|
Unknown - indicates the port membership has not been configured.
|
|
Untagged - indicates the frame leaving the device has no VLAN tag.
|
|
Tagged - indicates the frame leaving the device has one VLAN tag.
|
|
S-TAG - indicates the frame leaving the device has a service VLAN tag or
|
|
a Service VLAN tag and a customer VLAN tag.
|
|
TLS - indicates the frame leaving the device may have a customer VLAN tag
|
|
or no VLAN tag.
|
|
OMCI - indicates the frame leaving the device on the provised the GEM Port.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
|
|
|
|
BridgingIntfTypeValues ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Type of LAN/WAN connection for the interface.
|
|
List of supported strings:
|
|
lanInterface
|
|
wanInterface
|
|
lanRouterConnection
|
|
wanRouterConnection
|
|
"
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
|
|
|
|
VlanTLSMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Transparent LAN Service Mode. Enumeration of:
|
|
sTag - S-TAG mode. All traffic must be encapsulated within a
|
|
configured S-Tag. Untagged or single-tagged traffic
|
|
can be S-tagged upon LAN port ingress based on the
|
|
configured Port Defaults.
|
|
unknown - not defined
|
|
normal - All traffic must be encapsulated within a configured
|
|
VLAN tag. Untagged traffic can be tagged upon LAN
|
|
port ingress based on the configured Port Defaults.
|
|
"
|
|
SYNTAX INTEGER {
|
|
sTag (1), -- S-TAG mode.
|
|
unknown (2), -- Unknown mode
|
|
normal (3) -- CPE device operates according to the IEEE 802.1Q or
|
|
-- 802.1D specifications.
|
|
}
|
|
|
|
VlanTLSServiceTags ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Transparent Service Tags. Enumeration of:
|
|
none
|
|
sTag8100
|
|
sTag88A8
|
|
sTag9100
|
|
sTag9200
|
|
sTag9300
|
|
"
|
|
SYNTAX INTEGER {
|
|
none (1), -- no S-TAG specified
|
|
sTag8100 (2), -- Tag ID 0x8100
|
|
sTag88A8 (3), -- Tag ID 0x88A8
|
|
sTag9100 (4), -- Tag ID 0x9100
|
|
sTag9200 (5), -- Tag ID 0x9200
|
|
sTag9300 (6) -- Tag ID 0x9300
|
|
}
|
|
|
|
VlanQOSMethods ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Quality of Service Method. Enumeration of:
|
|
layer2 - Layer 2 VLAN COS method will check the COS bits in
|
|
the Ethernet Packet to define the QOS.
|
|
layer3 - Layer 3 IP Precedence method will check the DSCP field
|
|
in the IP header to determine priority of the packet.
|
|
"
|
|
SYNTAX INTEGER {
|
|
layer2 (1), -- Layer 2 VLAN COS
|
|
layer3 (2) -- Layer 3 IP Precendence
|
|
}
|
|
|
|
|
|
|
|
--
|
|
-- Layer 2 Bridging Objects
|
|
-- TR-98 InternetGatewayDevice.Layer2Bridging.
|
|
--
|
|
-- Layer-2 bridging table specifies bridges between layer-2 LAN and/or
|
|
-- WAN interfaces. Bridges can be defined to include layer-2 filter
|
|
-- criteria to selectively bridge traffic between interfaces.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.2.5.42.1
|
|
--
|
|
|
|
maxBridgeEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries available in the Bridge table."
|
|
::= { layer2BridgingObjects 1}
|
|
|
|
maxFilterEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries available in the Filter table."
|
|
::= { layer2BridgingObjects 2}
|
|
|
|
maxMarkingEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries available in the Marking table."
|
|
::= { layer2BridgingObjects 3}
|
|
|
|
bridgeNumberOfEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of entries in the Bridge table."
|
|
::= { layer2BridgingObjects 4}
|
|
|
|
filterNumberOfEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of entries in the Filter table."
|
|
::= { layer2BridgingObjects 5}
|
|
|
|
markingNumberOfEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of entries in the Marking table."
|
|
::= { layer2BridgingObjects 6}
|
|
|
|
availableInterfaceNumberOfEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of entries in the AvailableInterfaces table."
|
|
::= { layer2BridgingObjects 7}
|
|
|
|
|
|
--
|
|
-- Layer 2 Bridge Table
|
|
-- TR-98 InternetGatewayDevice.Layer2Bridging.Bridge.{i}.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.2.5.41.1.8
|
|
--
|
|
bridgeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BridgeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge Table."
|
|
::= { layer2BridgingObjects 8 }
|
|
|
|
bridgeEntry OBJECT-TYPE
|
|
SYNTAX BridgeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge Table."
|
|
INDEX { bridgeKey }
|
|
::= { bridgeTable 1}
|
|
|
|
BridgeEntry ::=
|
|
SEQUENCE {
|
|
bridgeKey Unsigned32,
|
|
bridgeEnable TruthValue,
|
|
bridgeStatus BridgeEntryStatusValues,
|
|
bridgeName OCTET STRING,
|
|
vlanID Unsigned32,
|
|
vlanType VlanTypeValues,
|
|
secureVlan VlanSecureType,
|
|
bridgeTableRowStatus ZhoneRowStatus
|
|
}
|
|
|
|
bridgeKey OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique key for each Bridge table entry."
|
|
::= { bridgeEntry 1}
|
|
|
|
bridgeEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables this Bridge table entry."
|
|
::= { bridgeEntry 2}
|
|
|
|
bridgeStatus OBJECT-TYPE
|
|
SYNTAX BridgeEntryStatusValues
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the bridge table entry. Enumeration of:
|
|
Disabled
|
|
Enabled
|
|
Error
|
|
"
|
|
::= { bridgeEntry 3}
|
|
|
|
bridgeName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Human-readable name for this Bridge table entry."
|
|
::= { bridgeEntry 4}
|
|
|
|
vlanID OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4096)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 802.1Q VLAN ID associated with this Bridge entry. A value
|
|
of 0 indicates either Untagged or PriorityOnly tagging, which
|
|
are treated identically."
|
|
::= { bridgeEntry 5}
|
|
|
|
vlanType OBJECT-TYPE
|
|
SYNTAX VlanTypeValues
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of 802.1Q VLAN associated with this Bridge entry.
|
|
Enumeration of:
|
|
Unknown
|
|
Bridged
|
|
Routed
|
|
TlsBridged
|
|
PppoeRouted
|
|
PppoeBridged
|
|
BRouted
|
|
PWEBridged
|
|
CPU-Bridged
|
|
"
|
|
::= { bridgeEntry 6}
|
|
|
|
secureVlan OBJECT-TYPE
|
|
SYNTAX VlanSecureType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secure setting for a VLAN associated with a bridge table entry.
|
|
Enumeration of:
|
|
disable
|
|
enable
|
|
unknown
|
|
"
|
|
::= { bridgeEntry 7}
|
|
|
|
bridgeTableRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMP RowStatus of the current row. The following objects must
|
|
be specified upon row creation:
|
|
vlanID
|
|
vlanType
|
|
bridgeName
|
|
"
|
|
::= { bridgeEntry 8}
|
|
|
|
|
|
|
|
--
|
|
-- Layer 2 Bridge Filter Table
|
|
-- TR-98 InternetGatewayDevice.Layer2Bridging.Filter.{i}.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.2.5.41.1.2.9
|
|
--
|
|
filterBridgeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FilterBridgeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filter table containing filter entries each of which is associated
|
|
with one Bridge as specified by a Bridge table entry.
|
|
"
|
|
::= { layer2BridgingObjects 9 }
|
|
|
|
filterBridgeEntry OBJECT-TYPE
|
|
SYNTAX FilterBridgeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge Filter Table."
|
|
INDEX { filterKey, filterBridgeReference }
|
|
::= { filterBridgeTable 1}
|
|
|
|
FilterBridgeEntry ::=
|
|
SEQUENCE {
|
|
filterKey Unsigned32,
|
|
filterEnable TruthValue,
|
|
zhnFilterStatus BridgeEntryStatusValues,
|
|
filterBridgeReference Unsigned32,
|
|
filterInterface OCTET STRING,
|
|
sourceMACFromVendorClassIDFilter OCTET STRING,
|
|
sourceMACFromVendorClassIDFilterExclude TruthValue,
|
|
bridgeFilterRowStatus ZhoneRowStatus
|
|
}
|
|
|
|
filterKey OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique key for each Bridge Filter table entry."
|
|
::= { filterBridgeEntry 1}
|
|
|
|
filterEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables this Filter table entry."
|
|
::= { filterBridgeEntry 2}
|
|
|
|
zhnFilterStatus OBJECT-TYPE
|
|
SYNTAX BridgeEntryStatusValues
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this Filter table entry. Enumeration of:
|
|
Disabled
|
|
Enabled
|
|
Error
|
|
"
|
|
::= { filterBridgeEntry 3}
|
|
|
|
filterBridgeReference OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BridgeKey value of the Bridge table entry associated with
|
|
this Filter. "
|
|
::= { filterBridgeEntry 4}
|
|
|
|
filterInterface OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface or interfaces associated with this Filter table
|
|
entry. The bridge corresponding to this Filter table entry is
|
|
defined to admit packets on ingress to the bridge from the
|
|
specified interfaces that meet all of the criteria specified
|
|
in the Filter table entry. The following values are defined.
|
|
|
|
- To associate this Filter with a single interface
|
|
listed in the AvailableInterface table, the Filter
|
|
Interface value is set to the value of corresponding
|
|
AvailableInterfaceKey.
|
|
|
|
- AllInterfaces indicates that this Filter is associated
|
|
with all LAN and WAN interfaces listed in the AvailableInterface
|
|
table (all entries of InterfaceType LANInterface or WANInterface).
|
|
|
|
- LANInterfaces indicates that this Filter is associated with all
|
|
LAN interfaces listed in the AvailableInterface table (all entries
|
|
of InterfaceType LANInterface).
|
|
|
|
- WANInterfaces indicates that this Filter is associated with all
|
|
WAN interfaces listed in the AvailableInterface table (all entries
|
|
of InterfaceType WANInterface).
|
|
|
|
- An empty string indicates the Filter table entry is not associated
|
|
with any interface (and has no effect).
|
|
"
|
|
::= { filterBridgeEntry 5}
|
|
|
|
sourceMACFromVendorClassIDFilter OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string used to identify one or more devices via DHCP for which
|
|
MAC address filtering would subsequently apply. A device is considered
|
|
matching if it its DHCP Vendor Class Identifier (Option 60 as defined
|
|
in RFC 2132) in the most recent DHCP lease acquisition or renewal was
|
|
equal to the specified value.
|
|
"
|
|
::= { filterBridgeEntry 6}
|
|
|
|
sourceMACFromVendorClassIDFilterExclude OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If false, on ingress to the interfaces associated with this Filter,
|
|
the Bridge admits only those packets whose source MAC Address matches
|
|
that of a LAN device previously identified as described in
|
|
SourceMACFromVendorClassIDFilter.
|
|
|
|
- If SourceMACFromVendorClassIDFilter is empty, no packets are admitted.
|
|
|
|
- If SourceMACFromVendorClassIDFilter is true on ingress to the interfaces
|
|
associated with this Filter, the Bridge admits all packets except those
|
|
packets whose source MAC Address matches that of a LAN device previously
|
|
identified as described in SourceMACFromVendorClassIDFilter.
|
|
|
|
- If the SourceMACFromVendorClassIDFilter is empty, packets are admitted
|
|
regardless of MAC address.
|
|
"
|
|
::= { filterBridgeEntry 7}
|
|
|
|
bridgeFilterRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMP RowStatus of the current row. The following objects must
|
|
be specified upon row creation:
|
|
filterBridgeReference
|
|
"
|
|
::= { filterBridgeEntry 8}
|
|
|
|
|
|
--
|
|
-- Layer 2 Bridge Marking Table
|
|
-- TR-98 InternetGatewayDevice.Layer2Bridging.Marking.{i}
|
|
--
|
|
-- 1.3.6.1.4.1.5504.2.5.41.1.2.10
|
|
--
|
|
markingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MarkingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Marking table identifies non-default layer-2 marking behavior for
|
|
packets on egress from the specified interfaces.
|
|
"
|
|
::= { layer2BridgingObjects 10}
|
|
|
|
markingEntry OBJECT-TYPE
|
|
SYNTAX MarkingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Marking table identifies non-default layer-2 marking behavior for
|
|
packets on egress from the specified interfaces.
|
|
"
|
|
INDEX { markingKey, markingBridgeReference }
|
|
::= { markingTable 1}
|
|
|
|
MarkingEntry ::=
|
|
SEQUENCE {
|
|
markingKey Unsigned32,
|
|
markingEnable TruthValue,
|
|
markingStatus BridgeEntryStatusValues,
|
|
markingBridgeReference Unsigned32,
|
|
markingInterface OCTET STRING,
|
|
vlanIDUntag TruthValue,
|
|
vlanIDMark INTEGER,
|
|
ethernetPriorityMark INTEGER,
|
|
ethernetPriorityOverride TruthValue,
|
|
vlanIDType VlanIDType,
|
|
bridgeMarkingRowStatus ZhoneRowStatus
|
|
}
|
|
|
|
markingKey OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique key for each Bridge Marking table entry."
|
|
::= { markingEntry 1}
|
|
|
|
markingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables this Marking table entry."
|
|
::= { markingEntry 2}
|
|
|
|
markingStatus OBJECT-TYPE
|
|
SYNTAX BridgeEntryStatusValues
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this Marking table entry. Enumeration of:
|
|
Disabled
|
|
Enabled
|
|
Error
|
|
"
|
|
::= { markingEntry 3}
|
|
|
|
markingBridgeReference OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BridgeKey value of the Bridge table entry associated with
|
|
this Marking.
|
|
|
|
The effect of a Marking table entry applies only to packets that
|
|
have been admitted to the specified bridge (regardless of the
|
|
ingress interface).
|
|
"
|
|
::= { markingEntry 4}
|
|
|
|
markingInterface OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface or interfaces associated with this Marking table
|
|
entry. The bridge corresponding to this Marking table entry is
|
|
defined to admit packets on ingress to the bridge from the
|
|
specified interfaces that meet all of the criteria specified
|
|
in the Marking table entry. The following values are defined.
|
|
|
|
- To associate this Marking with a single interface
|
|
listed in the AvailableInterface table, the Marking
|
|
Interface value is set to the value of corresponding
|
|
AvailableInterfaceKey.
|
|
|
|
- AllInterfaces indicates that this Marking is associated
|
|
with all LAN and WAN interfaces listed in the AvailableInterface
|
|
table (all entries of InterfaceType LANInterface or WANInterface).
|
|
|
|
- LANInterfaces indicates that this Marking is associated with all
|
|
LAN interfaces listed in the AvailableInterface table (all entries
|
|
of InterfaceType LANInterface).
|
|
|
|
- WANInterfaces indicates that this Marking is associated with all
|
|
WAN interfaces listed in the AvailableInterface table (all entries
|
|
of InterfaceType WANInterface).
|
|
|
|
- An empty string indicates the Marking table entry is not associated
|
|
with any interface (and has no effect).
|
|
|
|
If there is more than one enabled Marking table entry that specifies
|
|
one or more of the same interfaces for the same bridge (i.e. identical
|
|
values of MarkingBridgeReference), then for packets on egress from
|
|
the specified bridge to those interfaces, the applied marking MUST be
|
|
that specified in the Marking table entry among those in conflict
|
|
with the lowest MarkingKey value.
|
|
|
|
If an interface in a given bridge does not have a corresponding
|
|
Marking table entry, the marking is left unchanged on egress.
|
|
"
|
|
::= { markingEntry 5}
|
|
|
|
vlanIDUntag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, on egress to the interfaces associated with this Marking table
|
|
entry, all packets are Untagged. That is, the VLAN tag is stripped from
|
|
the packet. If false, on egress to the interfaces associated with this
|
|
Marking table entry, all VLAN tags are left intact (including those added
|
|
on ingress).
|
|
"
|
|
::= { markingEntry 6}
|
|
|
|
vlanIDMark OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 802.1Q VLAN ID to be used on egress to the interfaces associated
|
|
with this Marking table entry (if VLANIDUntag is false). A value of -1
|
|
indicates that the default VLAN ID for the Bridge should be used instead
|
|
(as specified by InternetGatewayDevice.Layer2Bridging.Bridge.{i}.vlanID
|
|
for the Bridge table entry associated with this Marking table entry).
|
|
"
|
|
::= { markingEntry 7}
|
|
|
|
ethernetPriorityMark OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ethernet priority code (as defined in 802.1D) to mark traffic with that
|
|
falls into this Bridge on egress to the interfaces associated with this
|
|
Marking table entry. A value of -1 indicates no change from the incoming
|
|
packet or the mark assigned by the classifier.
|
|
"
|
|
::= { markingEntry 8}
|
|
|
|
ethernetPriorityOverride OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If false, on egress to the interfaces associated with this Marking table
|
|
entry, the EthernetPriorityMark, if specified, is applied only to packets
|
|
of priority 0.
|
|
|
|
If true, on egress to the interfaces associated with this Marking table
|
|
entry, the EthernetPriorityMark, if specified, is to be applied to all
|
|
packets on Bridge.
|
|
|
|
If VLANIDUntag is true, then no priority marking is done since the tag
|
|
containing the Ethernet priority is removed.
|
|
"
|
|
::= { markingEntry 9}
|
|
|
|
vlanIDType OBJECT-TYPE
|
|
SYNTAX VlanIDType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the port VLAN membership type. The supported
|
|
VLAN membership types are:
|
|
|
|
Tagged - The frame leaving the device has one VLAN tag.
|
|
|
|
Untagged - The frame leaving the device has no VLAN tag.
|
|
|
|
S-TAG - The frame leaving the device has a service VLAN tag or
|
|
a Service VLAN tag and a customer VLAN tag.
|
|
|
|
TLS - The frame leaving the device may have a customer VLAN tag
|
|
or no VLAN tag.
|
|
|
|
OMCI - The frame leaves the device on the provised the GEM Port.
|
|
"
|
|
::= { markingEntry 10}
|
|
|
|
bridgeMarkingRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMP RowStatus of the current row.
|
|
"
|
|
::= { markingEntry 11}
|
|
|
|
|
|
--
|
|
-- Layer 2 Bridge Available Interface Table
|
|
-- TR-98 InternetGatewayDevice.Layer2Bridging.AvailableInterface.{i}
|
|
--
|
|
-- 1.3.6.1.4.1.5504.2.5.41.1.2.11
|
|
--
|
|
availableInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AvailableInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing all LAN and WAN interfaces that are available to
|
|
be referenced by the Bridge table. Only interfaces that can carry
|
|
layer-2 bridged traffic are included.
|
|
"
|
|
::= { layer2BridgingObjects 11}
|
|
|
|
availableInterfaceEntry OBJECT-TYPE
|
|
SYNTAX AvailableInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing all LAN and WAN interfaces that are available to
|
|
be referenced by the Bridge table. Only interfaces that can carry
|
|
layer-2 bridged traffic are included.
|
|
"
|
|
INDEX { availableInterfaceKey }
|
|
::= { availableInterfaceTable 1}
|
|
|
|
AvailableInterfaceEntry ::=
|
|
SEQUENCE {
|
|
availableInterfaceKey Unsigned32,
|
|
interfaceType BridgingIntfTypeValues,
|
|
interfaceReference OCTET STRING,
|
|
availableInterfaceRowStatus ZhoneRowStatus
|
|
}
|
|
|
|
availableInterfaceKey OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique key for each interface entry."
|
|
::= { availableInterfaceEntry 1}
|
|
|
|
interfaceType OBJECT-TYPE
|
|
SYNTAX BridgingIntfTypeValues
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the interface is a LAN-side or WAN-side interface,
|
|
or a LAN-side or WAN-side connection to the Gateway.
|
|
"
|
|
::= { availableInterfaceEntry 2}
|
|
|
|
interfaceReference OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table should contain a single entry for each available LAN
|
|
and WAN interface. For a WAN interface, this parameter is the full
|
|
hierarchical parameter name of a particular WANConnectionDevice.
|
|
A WANConnectionDevice is considered available (included in this
|
|
table) only if it supports layer-2 bridged traffic. That is, this
|
|
table MUST include only WANConnectionDevices that contain either
|
|
a WANEthernetLinkConfig object, or that contain a WANDSLLinkConfig
|
|
object for which the LinkType is EoA (Ethernet over ATM). For example:
|
|
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2
|
|
|
|
For a LAN interface, this parameter is the full hierarchical parameter
|
|
name of a particular LAN InterfaceConfig object, or a WLANConfiguration
|
|
object. This table SHOULD include one entry for each such object. For
|
|
example:
|
|
InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2
|
|
|
|
For a WAN-side connection to the Gateway's IP router, this parameter
|
|
is the full hierarchical parameter name of a particular WANConnection
|
|
service. This table SHOULD include an entry for each layer-3 WAN
|
|
connection. For example:
|
|
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.WANPPPConnection.1
|
|
|
|
For a LAN-side connection to the Gateway's IP router, this parameter
|
|
is the full hierarchical parameter name of a particular LANDevice. This
|
|
table SHOULD include an entry for each LANDevice, each of which is
|
|
associated with a LAN-side layer-3 connection to the Gateway's IP
|
|
router. For example:
|
|
InternetGatewayDevice.LANDevice.2
|
|
"
|
|
::= { availableInterfaceEntry 3}
|
|
|
|
availableInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMP RowStatus of the current row."
|
|
::= { availableInterfaceEntry 4}
|
|
|
|
|
|
--
|
|
-- Layer 2 VLAN Port Membership Table
|
|
--
|
|
-- Since the TR-98 like Layer2Bridging tables are rather
|
|
-- cumbersome to use, this Zhone proprietary MIB can be
|
|
-- used as an alternative way to assign layer 2 bridging
|
|
-- interfaces/ports to a VLAN.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.2.5.41.1.2.12
|
|
--
|
|
vlanPortMembershipTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanPortMembershipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Layer 2 VLAN Port Membership Table."
|
|
::= { layer2BridgingObjects 12}
|
|
|
|
vlanPortMembershipEntry OBJECT-TYPE
|
|
SYNTAX VlanPortMembershipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Layer 2 VLAN Port Membership Table."
|
|
INDEX { ifIndex, vlanPortVlanID }
|
|
::= { vlanPortMembershipTable 1 }
|
|
|
|
VlanPortMembershipEntry ::= SEQUENCE {
|
|
vlanPort OCTET STRING,
|
|
vlanPortVlanID Unsigned32,
|
|
vlanPortMembershipType VlanIDType,
|
|
vlanPortMembershipAction ZhoneRowStatus
|
|
}
|
|
|
|
vlanPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge interface(port) name."
|
|
::= { vlanPortMembershipEntry 1 }
|
|
|
|
|
|
vlanPortVlanID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 802.1Q VLAN ID associated with this Bridge entry."
|
|
::= { vlanPortMembershipEntry 2 }
|
|
|
|
vlanPortMembershipType OBJECT-TYPE
|
|
SYNTAX VlanIDType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the port VLAN membership type. When creating a
|
|
new Vlan Port Member Entry, the supported VLAN membership types are:
|
|
|
|
Tagged - The frame leaving the device has one VLAN tag.
|
|
|
|
Untagged - The frame leaving the device has no VLAN tag.
|
|
|
|
S-TAG - The frame leaving the device has a service VLAN tag or
|
|
a Service VLAN tag and a customer VLAN tag.
|
|
|
|
TLS - The frame leaving the device may have a customer VLAN tag
|
|
or no VLAN tag.
|
|
|
|
OMCI - The frame leaving the device is on the provisioned GEM Port.
|
|
"
|
|
::= { vlanPortMembershipEntry 3 }
|
|
|
|
|
|
vlanPortMembershipAction OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMP RowStatus of the current row."
|
|
::= { vlanPortMembershipEntry 4 }
|
|
|
|
|
|
--
|
|
-- Bridging Global Scalar Objects
|
|
--
|
|
-- 1.3.6.1.4.1.5504.2.5.42.1.13
|
|
--
|
|
layer2BridgingGlobalObjects OBJECT IDENTIFIER ::= { layer2BridgingObjects 13 }
|
|
|
|
vlanTLSMode OBJECT-TYPE
|
|
SYNTAX VlanTLSMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object implements transparent LAN service (TLS) by using a
|
|
S-Tag (Service Provider tag) to tunnel the customer traffic over
|
|
a service provider network. The CPE can operate in normal or S-Tag
|
|
mode. In normal mode, CPE device operates according to the IEEE
|
|
802.1Q or 802.1D specifications. In S-TAG mode, the CPE device
|
|
operates as follows:
|
|
1) The CPE's TPID (tag protocol ID) must be provisioned.
|
|
2) A S-Tag frame consists of a VLAN ID and a TPID that
|
|
matches the CPE's provisioned TPID.
|
|
3) When the CPE adds a S-TAG, the S-Tag's VLAN ID will be
|
|
taken from the CPE's default PVID and the TPID will be taken
|
|
from the CPE's provisioned TPID.
|
|
4) The CPE device supports a TLS-Bridge. The ports on this
|
|
bridge can be either S-TAG or TLS members.
|
|
S-Tag port - The input frames from the service provider
|
|
port may or may not have a S-TAG.
|
|
The CPE will compare the tagged frame's TPID
|
|
against the provisioned S-TAG TPID. If there
|
|
is a match, the CPE will bridge the frame based
|
|
on the VLAN ID in the S-Tag. If there is not a
|
|
match, the frame is forwarded to the CPU.
|
|
TLS port - The CPE will add a S-Tag to all input frames
|
|
from this port regardless of whether the frames
|
|
have a 802.1Q tag or not. The CPE will bridge the
|
|
frames based on the VLAN ID in the S-Tag. Only
|
|
a VLAN-tagged or untagged frames are expected
|
|
from the ingress of a TLS (customer) port.
|
|
"
|
|
::= { layer2BridgingGlobalObjects 1 }
|
|
|
|
vlanServiceTagTPID OBJECT-TYPE
|
|
SYNTAX VlanTLSServiceTags
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object specifies the TPID (Tag Protocol ID) of the S-Tag.
|
|
It is only used when the device's VlanMode is set to S-Tag. The
|
|
supported Service TPIDs are:
|
|
none
|
|
sTag8100
|
|
sTag88A8
|
|
sTag9100
|
|
sTag9200
|
|
sTag9300
|
|
"
|
|
::= { layer2BridgingGlobalObjects 2 }
|
|
|
|
vlanRouteAcrossVlans OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object defines the VLAN router operation. If this object is set
|
|
to TRUE, the router will route between IP subnets across VLANs. Route
|
|
table lookups will ignore the VLAN ID of the ingress and egress ports.
|
|
If there is a match, the packet is routed out the interface specified
|
|
in the Route Table, regardless of the VLAN with which it is a member.
|
|
|
|
If set to FALSE, the router will only route between IP subnets that
|
|
are on the same VLAN. Packets will be forwarded to the configured Default
|
|
Route for the VLAN that they arrived on, unless there is a Route Table
|
|
match within that same VLAN. Routing of packets across VLANs is
|
|
prevented, providing traffic isolation.
|
|
"
|
|
::= { layer2BridgingGlobalObjects 3 }
|
|
|
|
vlanQOSMethod OBJECT-TYPE
|
|
SYNTAX VlanQOSMethods
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object defines the VLAN router operation. If this object is set
|
|
to TRUE, the router will route between IP subnets across VLANs. If
|
|
it is set to FALSE, the router will only route between IP subnets
|
|
that are on the same VLAN.
|
|
"
|
|
::= { layer2BridgingGlobalObjects 4 }
|
|
|
|
|
|
|
|
-- ****************************************************************************
|
|
--
|
|
-- Conformance Information
|
|
--
|
|
|
|
zhnLayer2BridgeConformance OBJECT IDENTIFIER ::= { zhnLayer2Bridging 2 }
|
|
|
|
zhnLayer2BridgeGroups OBJECT IDENTIFIER ::= { zhnLayer2BridgeConformance 1}
|
|
zhnLayer2BridgeCompliances OBJECT IDENTIFIER ::= { zhnLayer2BridgeConformance 2}
|
|
|
|
--
|
|
-- Compliance Statements
|
|
--
|
|
|
|
zhnLayer2BridgeCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Compliance statement for SNMP entities which
|
|
manage display the Zhone CPE Layer Bridging Information.
|
|
|
|
The Layer 2 Bridging filterBridgeTable is not required to
|
|
be supported. If it is supported, not all objects defined
|
|
as read-write are required to be writable.
|
|
"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
zhnBridgeGroup, zhnBridgeTableGroup, zhnBridgeMarkingTableGroup,
|
|
zhnBridgeAvailableInterfaceGroup, zhnPortMembershipGroup
|
|
}
|
|
|
|
OBJECT bridgeEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION "Write access is not required."
|
|
|
|
OBJECT markingEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION "Write access is not required."
|
|
|
|
OBJECT vlanIDMark
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION "Write access is not required."
|
|
|
|
OBJECT ethernetPriorityMark
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION "Write access is not required."
|
|
|
|
OBJECT ethernetPriorityOverride
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION "Write access is not required."
|
|
|
|
::= {zhnLayer2BridgeCompliances 1}
|
|
|
|
|
|
--
|
|
-- Units of Conformance
|
|
--
|
|
|
|
zhnBridgeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
maxBridgeEntries,
|
|
maxFilterEntries,
|
|
maxMarkingEntries,
|
|
bridgeNumberOfEntries,
|
|
filterNumberOfEntries,
|
|
markingNumberOfEntries ,
|
|
availableInterfaceNumberOfEntries
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Zhone Bridge table objects that describe the
|
|
bridged interfaces of the device."
|
|
::= { zhnLayer2BridgeGroups 1}
|
|
|
|
|
|
|
|
zhnBridgeTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
bridgeKey,
|
|
bridgeEnable,
|
|
bridgeStatus,
|
|
bridgeName,
|
|
vlanID,
|
|
vlanType,
|
|
secureVlan,
|
|
bridgeTableRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Zhone Bridge table objects that describe the
|
|
bridged interfaces of the device."
|
|
::= { zhnLayer2BridgeGroups 2}
|
|
|
|
|
|
zhnFilterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
filterKey,
|
|
filterEnable,
|
|
zhnFilterStatus,
|
|
filterBridgeReference,
|
|
filterInterface,
|
|
sourceMACFromVendorClassIDFilter,
|
|
sourceMACFromVendorClassIDFilterExclude,
|
|
bridgeFilterRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Zhone Bridge Filter table objects that describe the
|
|
filtering for bridged interfaces of the device."
|
|
::= { zhnLayer2BridgeGroups 3}
|
|
|
|
|
|
zhnBridgeMarkingTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
markingKey,
|
|
markingEnable,
|
|
markingStatus,
|
|
markingBridgeReference,
|
|
markingInterface,
|
|
vlanIDUntag,
|
|
vlanIDMark,
|
|
ethernetPriorityMark,
|
|
ethernetPriorityOverride,
|
|
vlanIDType,
|
|
bridgeMarkingRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Zhone Bridge Marking table objects that describe
|
|
the VLAN marking for bridged interfaces of the device."
|
|
::= { zhnLayer2BridgeGroups 4}
|
|
|
|
|
|
zhnBridgeAvailableInterfaceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
availableInterfaceKey,
|
|
interfaceType,
|
|
interfaceReference,
|
|
availableInterfaceRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Zhone Bridge Available Interface table objects that
|
|
identify the available bridged interfaces of the device."
|
|
::= { zhnLayer2BridgeGroups 5}
|
|
|
|
|
|
zhnPortMembershipGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
vlanPort,
|
|
vlanPortVlanID,
|
|
vlanPortMembershipType,
|
|
vlanPortMembershipAction
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Zhone VLAN Port Membership table objects that
|
|
map bridge ports to VLANs."
|
|
::= { zhnLayer2BridgeGroups 6}
|
|
|
|
|
|
|
|
zhnVlanGlobalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
vlanTLSMode,
|
|
vlanServiceTagTPID,
|
|
vlanRouteAcrossVlans,
|
|
vlanQOSMethod
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Zhone VLAN Global scalar objects."
|
|
::= { zhnLayer2BridgeGroups 7}
|
|
|
|
|
|
END
|