WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zhone/NTNTECH-CHASSIS-CONFIGURATION-MIB

903 lines
32 KiB
Plaintext
Raw Blame History

NTNTECH-CHASSIS-CONFIGURATION-MIB DEFINITIONS ::= BEGIN
-- ****************************************************************
-- Enterprise:
-- Paradyne Corporation.
--
-- ContactInfo:
-- Paradyne Corporation
-- 8545 126th Avenue North
-- Largo, FL 33773
-- phone: +1 (727) 530 2000
-- email: support@paradyne.com
-- www: http://www.nettonet.com/support/
--
-- Description:
-- ntntech-chassis-configuration-MIB.my
-- Revision: 1.02.02
-- Part Number: xx-xxxx-xx
-- Date: November 17, 2004
--
-- This module provides explicit definitions for the Net to
-- Net Technologies naming tree below:
--
-- nettonettech { enterprises 8059 }
--
-- This module will be extended, as additional sub-sections
-- of this naming tree are defined.
--
-- Disclaimer:
-- This is an extremely preliminary MIB module and is subject
-- to change at any time therefore, use at your own risk.
--
-- Copyright (c) 2000 - 2004 by Paradyne Corporation.
-- All rights reserved.
-- ****************************************************************
IMPORTS
ntntechChassis,NtnDefaultGateway,NtnSubnetMask,NtnTimeTicks,
NtnDisplayString FROM NTNTECH-ROOT-MIB
OBJECT-TYPE, MODULE-IDENTITY,IpAddress FROM SNMPv2-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC;
-- ****************************************************************
ntntechChassisConfigurationMIB MODULE-IDENTITY
LAST-UPDATED "0411170200Z" -- November 17, 2004
ORGANIZATION "Paradyne Corporation"
CONTACT-INFO
"Paradyne Corporation
8545 126th Avenue North
Largo, FL 33773
phone: +1 (727) 530 2000
email: support@paradyne.com
www: http://www.nettonet.com/support/"
DESCRIPTION
"This mib module defines an SNMP API to manage the Paradyne Corporation's
DSLAM chassis parameters. These parameter settings are specifically associated
with the the MUM200-2 and MUM2000-2 modules and the Mini and Micro DSLAMs.
The interface types are described below,
AMD8000-12
12-Port ADSL Mini DSLAMs With Full Rate and G.lite Operational Modes
SMD2000-12, SMD2000Q-12, SMD2000G-12
12-Port SDSL Mini DSLAMs: AC and DC Versions with Cap, 2B1Q
and G.SHDSL line encoding
SuD2011_12T, SuD2011_12E, SuD2003_12T, SuD2003_12E
12-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding
SuD2011_6T, SuD2011_6E, SuD2002_6T, SuD2002_6E
6-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding
MUM200-2, MUM2000-2
Multiplexer Uplink Module with Dual Uplink Interface Module Capacity
UIM-10/100
Uplink Interface Module
UIM-DS3
DS3 Uplink Interface Module
UIM-E1
E1 Uplink Interface Module
UIM-E3
E3 Uplink Interface Module
UIM-T1
T1 Uplink Interface Module "
REVISION "0208131112Z"
DESCRIPTION
"Added the mumCfgAdvanced OID.
Added the mumCfgManagementPort OID."
REVISION "0208280912Z"
DESCRIPTION
"New Release - v1.01.00"
REVISION "0210110913Z"
DESCRIPTION
"Added OID mgmtPortCfgType to the mgmtPortCfgTable."
REVISION "0210220200Z"
DESCRIPTION
"New Release - v1.01.01"
REVISION "0211041258Z"
DESCRIPTION
"Added the values uplink3(4), uplink4(5), and mgmt(6) to the mumCfgInterConnection
OID."
REVISION "0403151015Z"
DESCRIPTION
"Added OID mumCfgCommitChange to the mumCfgTable."
REVISION "0404271116Z"
DESCRIPTION
"Updated the description associated with the mumCfgCommitChange OID."
REVISION "0410110909Z"
DESCRIPTION
"Updated the description associated with the mumCfgCommitChange OID again. Adjusted
the copyright date and references to Paradyne."
REVISION "0411170958Z"
DESCRIPTION
"New Release -- version 1.02.01"
::= { ntntechChassis 1 }
-- Objects
chsCfgMIBObjects OBJECT IDENTIFIER ::= { ntntechChassisConfigurationMIB 1 }
-- NTNTECH Chassis Configuration (chsCfg) MIB objects for MUM200/2000 modules
-- or Mini and Micro DSLAMs.
chsCfgParameterConfiguration OBJECT IDENTIFIER ::= { chsCfgMIBObjects 1 }
-- NTNTECH Chassis Configuration (chsCfg) Parameter Configuration for MUM200/2000 modules
-- or Mini and Micro DSLAMs.
--
-- IPD12000 - slots 13,14 MIB index - 1,2 respecitively
-- IPD4000 - slot 5 MIB index - 1
-- Mini DSLAM - NA MIB index - 1
-- Micro DSLAM - NA MIB index - 1
--
prmCfgMultiplexerUplinkModule OBJECT IDENTIFIER ::= { chsCfgParameterConfiguration 1 }
mumCfgNotes OBJECT-TYPE
SYNTAX NtnDisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The chassis system 'Notes' field is to be used as a scratchpad
(i.e. chassis id or name) by the administrator. The default value is blank.
The length of string must not exceed 128 alpha-numeric characters."
::= { prmCfgMultiplexerUplinkModule 1 }
mumCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF MumCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of MUM200-2/2000-2 module or Mini/Micro DSLAM entries."
::= { prmCfgMultiplexerUplinkModule 2 }
mumCfgEntry OBJECT-TYPE
SYNTAX MumCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable to a MUM200-2/MUM2000-2
module or Mini/Micro DSLAM."
INDEX { mumCfgIndex }
::= { mumCfgTable 1 }
MumCfgEntry ::=
SEQUENCE {
mumCfgIndex INTEGER,
mumCfgIpAddress IpAddress,
mumCfgSubnetMask IpAddress,
mumCfgDefaultGateway IpAddress,
mumCfgInbandMgmt INTEGER,
mumCfgInbandMGMTVlanID INTEGER,
mumCfgInterConnection INTEGER,
mumCfgCommitChange INTEGER
}
mumCfgIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,
chassis type physical location(s) translation
------------ --------------------------------
IPD12000 MUM in slots 13,14 = mumCfgIndex 1,2 respecitively
IPD4000 MUM in slot 5 = mumCfgIndex 1
Mini DSLAM NA = mumCfgIndex 1
Micro DSLAM NA = mumCfgIndex 1"
::= { mumCfgEntry 1 }
mumCfgIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This parameter is initially set to a default value, i.e 192.168.254.252
for a MUM200-2/2000-2 module located in slot 13 of an IPD12000, slot 5
of an IPD4000 DSLAM and a Mini/Micro DSLAM. The default value of
192.168.254.253 will be for a MUM200-2/2000-2 module located in slot 14 of
an IPD12000 (duplicate IP addresses are not allowed). These default
values can be modified by the user."
::= { mumCfgEntry 2 }
mumCfgSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Subnet Mask assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This parameter is assiged by the user, the default value is 255.255.255.0."
::= { mumCfgEntry 3 }
mumCfgDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Default Gateway assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM.
This value is assiged by the user, the default value is 0.0.0.0."
::= { mumCfgEntry 4 }
mumCfgInbandMgmt OBJECT-TYPE
SYNTAX INTEGER {
on(1), -- parameter enabled
off(2) -- parameter disabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inband management feature, when enabled [ON(1)], allows access to the
DSLAM via the network against an assigned IP address, subnet mask,
and default gateway."
::= { mumCfgEntry 5 }
mumCfgInbandMGMTVlanID OBJECT-TYPE
SYNTAX INTEGER (0..4085)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP DSLAM supports 802.1Q Virtual LANs (VLANs). This parameter
configuration applies to the inband management traffic only.
It does not apply to out of band traffic received from the MGMT port.
Note: for the case where the chassis type is an IPD12000 loaded with
two MUMs, the setting of this parameter will affect both."
::= { mumCfgEntry 6 }
mumCfgInterConnection OBJECT-TYPE
SYNTAX INTEGER {
neither(1),
uplink1(2),
uplink2(3),
uplink3(4),
uplink4(5),
mgmt(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPD12000 or IPD4000 DSLAM interconnect configuration provides the system
manager the ability to daisy-chain one IP DSLAM to another so that a single
router may be used for all DSLAMs in the chain."
::= { mumCfgEntry 7 }
mumCfgCommitChange OBJECT-TYPE
SYNTAX INTEGER {
disabled(0), -- do not commit a change
enabled(1) -- commit a change
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to enabled(1) in order to commit the latest changes to the IP address, subnetmask,
default gateway chassis parameters. This is only applicable to the SNE2040G-P and the
SNE2040G-S."
::= { mumCfgEntry 8 }
mumCfgUplinkInterfaceModule OBJECT IDENTIFIER ::= { prmCfgMultiplexerUplinkModule 3 }
-- The ethernet table is simply a place holder for future reference.
uimCfgEthTable OBJECT-TYPE
SYNTAX SEQUENCE OF UimCfgEthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ethernet Uplink Interface Module (UIM) entries."
::= { mumCfgUplinkInterfaceModule 1 }
uimCfgEthEntry OBJECT-TYPE
SYNTAX UimCfgEthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to an ethernet Uplink Interface Module (UIM)."
INDEX { uimCfgEthMumIndex, uimCfgEthIndex }
::= { uimCfgEthTable 1 }
UimCfgEthEntry ::=
SEQUENCE {
uimCfgEthMumIndex INTEGER,
uimCfgEthIndex INTEGER,
uimCfgEthRxTxRate INTEGER,
uimCfgEthDuplex INTEGER
}
uimCfgEthMumIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,
chassis type physical location(s) translation
------------ --------------------------------
IPD12000 MUM in slots 13,14 = uimCfgEthMumIndex 1,2 respecitively
IPD4000 MUM in slot 5 = uimCfgEthMumIndex 1
Mini DSLAM NA = uimCfgEthMumIndex 1
Micro DSLAM NA = uimCfgEthMumIndex 1
Note: when configuring an ethernet UIM, the user must enter the
index of the MUM, see above table, that corresponds with the
IP address of the remote SNMP agent."
::= { uimCfgEthEntry 1 }
uimCfgEthIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical slot used to access the UIM in the MUM200-2/2000-2 module or
Mini/Micro DSLAM."
::= { uimCfgEthEntry 2 }
uimCfgEthRxTxRate OBJECT-TYPE
SYNTAX INTEGER {
uimEthAutoNegotiate(0),
uimEth10(1),
uimEth100(2),
uimEthGig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RxTx rate for an ethernet UIM."
::= { uimCfgEthEntry 3 }
uimCfgEthDuplex OBJECT-TYPE
SYNTAX INTEGER {
uimEthAutoNegotiate(0),
uimEthHalf(1),
uimEthFull(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current duplex setting for an ethernet UIM."
::= { uimCfgEthEntry 4 }
uimCfgT1Table OBJECT-TYPE
SYNTAX SEQUENCE OF UimCfgT1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of T1 Uplink Interface Module (UIM) entries."
::= { mumCfgUplinkInterfaceModule 2 }
uimCfgT1Entry OBJECT-TYPE
SYNTAX UimCfgT1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to a T1 Uplink Interface Module (UIM)."
INDEX { uimCfgT1MumIndex, uimCfgT1Index }
::= { uimCfgT1Table 1 }
UimCfgT1Entry ::=
SEQUENCE {
uimCfgT1MumIndex INTEGER,
uimCfgT1Index INTEGER,
uimCfgT1Frame INTEGER,
uimCfgT1LineCode INTEGER,
uimCfgT1LineBuildout INTEGER
}
uimCfgT1MumIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,
chassis type physical location(s) translation
------------ --------------------------------
IPD12000 MUM in slots 13,14 = uimCfgT1MumIndex 1,2 respecitively
IPD4000 MUM in slot 5 = uimCfgT1MumIndex 1
Mini DSLAM NA = uimCfgT1MumIndex 1
Micro DSLAM NA = uimCfgT1MumIndex 1
Note: when configuring a T1 UIM, the user must enter the
index of the MUM, see above table, that corresponds with the
IP address of the remote SNMP agent."
::= { uimCfgT1Entry 1 }
uimCfgT1Index OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical slot used to access the UIM in the MUM200-2/2000-2 module or
Mini/Micro DSLAM."
::= { uimCfgT1Entry 2 }
uimCfgT1Frame OBJECT-TYPE
SYNTAX INTEGER {
uimT1ESF(1),
uimT1SFD4(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame type parameter for a T1 UIM."
::= { uimCfgT1Entry 3 }
uimCfgT1LineCode OBJECT-TYPE
SYNTAX INTEGER {
uimT1B8ZS(1),
uimT1AMI(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line code parameter for a T1 UIM."
::= { uimCfgT1Entry 4 }
uimCfgT1LineBuildout OBJECT-TYPE
SYNTAX INTEGER {
uimT10db(1),
uimT1N7p5db(2),
uimT1N15db(3),
uimT1N22p5db(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line buildout parameter for a T1 UIM."
::= { uimCfgT1Entry 5 }
uimCfgE1Table OBJECT-TYPE
SYNTAX SEQUENCE OF UimCfgE1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of E1 Uplink Interface Module (UIM) entries."
::= { mumCfgUplinkInterfaceModule 3 }
uimCfgE1Entry OBJECT-TYPE
SYNTAX UimCfgE1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to an E1 Uplink Interface Module (UIM)."
INDEX { uimCfgE1MumIndex, uimCfgE1Index }
::= { uimCfgE1Table 1 }
UimCfgE1Entry ::=
SEQUENCE {
uimCfgE1MumIndex INTEGER,
uimCfgE1Index INTEGER,
uimCfgE1Frame INTEGER,
uimCfgE1LineCode INTEGER
}
uimCfgE1MumIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,
chassis type physical location(s) translation
------------ --------------------------------
IPD12000 MUM in slots 13,14 = uimCfgE1MumIndex 1,2 respecitively
IPD4000 MUM in slot 5 = uimCfgE1MumIndex 1
Mini DSLAM NA = uimCfgE1MumIndex 1
Micro DSLAM NA = uimCfgE1MumIndex 1
Note: when configuring an E1 UIM, the user must enter the
index of the MUM, see above table, that corresponds with the
IP address of the remote SNMP agent."
::= { uimCfgE1Entry 1 }
uimCfgE1Index OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical slot used to access the UIM in the MUM200-2/2000-2 module or
Mini/Micro DSLAM."
::= { uimCfgE1Entry 2 }
uimCfgE1Frame OBJECT-TYPE
SYNTAX INTEGER {
uimE1CRC(1),
uimE1NoCRC(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame type parameter for an E1 UIM."
::= { uimCfgE1Entry 3 }
uimCfgE1LineCode OBJECT-TYPE
SYNTAX INTEGER {
uimE1HDB3(1),
uimE1AMI(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line code parameter for an E1 UIM."
::= { uimCfgE1Entry 4 }
mumSNMPConfiguration OBJECT IDENTIFIER ::= { prmCfgMultiplexerUplinkModule 4 }
snmpCfgNoticeIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpCfgNoticeIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of SNMP trap notification Ip Addresses."
::= { mumSNMPConfiguration 1 }
snmpCfgNoticeIpEntry OBJECT-TYPE
SYNTAX SnmpCfgNoticeIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing SNMP information applicable to a MUM200-2/MUM2000-2 module
or Mini/Micro DSLAM."
INDEX { snmpCfgNoticeIndex }
::= { snmpCfgNoticeIpTable 1 }
SnmpCfgNoticeIpEntry ::=
SEQUENCE {
snmpCfgNoticeIndex INTEGER,
snmpCfgNoticeIpAddress IpAddress
}
snmpCfgNoticeIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value that points to one of four trap notification IP addresses."
::= { snmpCfgNoticeIpEntry 1 }
snmpCfgNoticeIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address of the location or computer to which you would like trap
notifications sent. The default value is 0.0.0.0 and it can be modified
by the user."
::= { snmpCfgNoticeIpEntry 2 }
snmpCfgAuthenticationTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether Authentication traps should be generated.
By default, this object should have the value enabled(1)."
::= { mumSNMPConfiguration 2 }
snmpCfgEnvironmentTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the fan and temperature traps should be generated.
By default, this object should have the value enabled(1)."
::= { mumSNMPConfiguration 3 }
snmpCfgColdstartTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether Cold Start traps should be generated.
By default, this object should have the value disabled(2)."
::= { mumSNMPConfiguration 4 }
snmpCfgModulePortTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the module present/removed and link up/down traps should be generated.
By default, this object should have the value disabled(2)."
::= { mumSNMPConfiguration 5 }
snmpCfgCommunity OBJECT IDENTIFIER ::= { mumSNMPConfiguration 6 }
comReadWriteAccess OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The community string that will allow the user read/write access to the
agent. In otherwords, the user will be allowed to view and set
parameter attributes.
Note: since this is a hidden attribute, for security purposes, when
performing a get on this OID the string that is returned will
be represented by asterisk(s)."
::= { snmpCfgCommunity 1 }
comReadOnlyAccess OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The community string that will allow the user read access to the
agent. In otherwords, the user will be allowed to view parameter attributes.
Note: since this is a hidden attribute, for security purposes, when
performing a get on this OID the string that is returned will
be represented by asterisk(s)."
::= { snmpCfgCommunity 2 }
mumCfgUniques OBJECT IDENTIFIER ::= { prmCfgMultiplexerUplinkModule 5 }
unqEmbHttpWebsrvrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This configuration parameter allows the user the ability to disable, or enable,
the embedded webserver.
By default, this object should have the value enabled(1)."
::= { mumCfgUniques 1 }
mumCfgAdvanced OBJECT IDENTIFIER ::= { prmCfgMultiplexerUplinkModule 6 }
advCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdvCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Advanced Configuration entries."
::= { mumCfgAdvanced 1 }
advCfgEntry OBJECT-TYPE
SYNTAX AdvCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to an Advanced Configuration parameter."
INDEX { advCfgMumIndex }
::= { advCfgTable 1 }
AdvCfgEntry ::=
SEQUENCE {
advCfgMumIndex INTEGER,
advCfgTFTPState INTEGER,
advCfgTelnetState INTEGER,
advCfgMgmtFltrIpStart IpAddress,
advCfgMgmtFltrIpEnd IpAddress,
advCfgMgmtSessionTimeout NtnTimeTicks
}
advCfgMumIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,
chassis type physical location(s) translation
------------ --------------------------------
IPD12000 MUM in slots 13,14 = uimCfgE1MumIndex 1,2 respecitively
IPD4000 MUM in slot 5 = uimCfgE1MumIndex 1
Mini DSLAM NA = uimCfgE1MumIndex 1
Micro DSLAM NA = uimCfgE1MumIndex 1
Note: when configuring an Advanced Configuration parameter, the user
must enter the index of the MUM, see above table, that corresponds
with the IP address of the remote SNMP agent."
::= { advCfgEntry 1 }
advCfgTFTPState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This configuration parameter allows the user the ability to disable, or enable,
the TFTP server.
By default, this object should have the value enabled(1)."
::= { advCfgEntry 2 }
advCfgTelnetState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This configuration parameter allows the user the ability to disable, or enable,
telnet.
By default, this object should have the value enabled(1)."
::= { advCfgEntry 3 }
advCfgMgmtFltrIpStart OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start value for the management IP filter range. This parameter
is initially set to a default filter range of 0.0.0.0 - 255.255.255.255.
Connection to the management system will be allowed only if the user's Ip
address value falls within the defined mumCfgMgmtIpStart and mumCfgMgmtIpEnd
range."
::= { advCfgEntry 4 }
advCfgMgmtFltrIpEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end value for the management IP filter range. This parameter
is initially set to a default filter range of 0.0.0.0 - 255.255.255.255.
Connection to the management system will be allowed only if the user's Ip
address value falls within the defined mumCfgMgmtIpStart and mumCfgMgmtIpEnd
range."
::= { advCfgEntry 5 }
advCfgMgmtSessionTimeout OBJECT-TYPE
SYNTAX NtnTimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value defines the length of a password session in seconds. If the
session has been idle for a time greater than this value, the browser will
be challenged again, even if it has provided authentication credentials
with the request."
::= { advCfgEntry 6 }
mumCfgManagementPort OBJECT IDENTIFIER ::= { prmCfgMultiplexerUplinkModule 7 }
mgmtPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF MgmtPortCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the hardware platform management port entries."
::= { mumCfgManagementPort 1 }
mgmtPortCfgEntry OBJECT-TYPE
SYNTAX MgmtPortCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to the managment (ethernet type) port."
INDEX { mgmtPortCfgMumIndex }
::= { mgmtPortCfgTable 1 }
MgmtPortCfgEntry ::=
SEQUENCE {
mgmtPortCfgMumIndex INTEGER,
mgmtPortCfgRxTxRate INTEGER,
mgmtPortCfgDuplex INTEGER,
mgmtPortCfgType INTEGER
}
mgmtPortCfgMumIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Translates to the physical slot number that a MUM200-2/2000-2 module
exists within a chassis. The Mini/Micro DSLAMs' physical location is
set to 1 by default. See below,
chassis type physical location(s) translation
------------ --------------------------------
IPD12000 MUM in slots 13,14 = uimCfgEthMumIndex 1,2 respecitively
IPD4000 MUM in slot 5 = uimCfgEthMumIndex 1
Mini DSLAM NA = uimCfgEthMumIndex 1
Micro DSLAM NA = uimCfgEthMumIndex 1
Note: when configuring a management port, the user must enter the
index of the MUM, see above table, that corresponds with the
IP address of the remote SNMP agent."
::= { mgmtPortCfgEntry 1 }
mgmtPortCfgRxTxRate OBJECT-TYPE
SYNTAX INTEGER {
uimEthAutoNegotiate(0),
uimEth10(1),
uimEth100(2),
uimEthGig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the RxTx rate for an ethernet management port."
::= { mgmtPortCfgEntry 2 }
mgmtPortCfgDuplex OBJECT-TYPE
SYNTAX INTEGER {
uimEthAutoNegotiate(0),
uimEthHalf(1),
uimEthFull(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the duplex setting for an ethernet management port."
::= { mgmtPortCfgEntry 3 }
mgmtPortCfgType OBJECT-TYPE
SYNTAX INTEGER {
mgmt(1),
uplink(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the management port type as follows. By setting this
port to mgmt(1), it will operate as a non-bridge mode connection.
Setting it to uplink(2), this port will operate like an uplink
interface module, i.e. a bridge mode connection.
Note: this applies to the AuD8000-12 micro DSLAM only."
::= { mgmtPortCfgEntry 4 }
END
View Git Blame Copy Permalink