WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/xerox/XEROX-PRINTER-EXT-MIB

4124 lines
139 KiB
Plaintext
Raw Blame History

XEROX-PRINTER-EXT-MIB DEFINITIONS ::= BEGIN
-- Module: XCMI Extension to IETF Printer MIB
--
--
-- File: 16prtx.txt, .mib
-- Date: April 10, 2013
-- Version: 6.006.pub
--
--
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
NOTIFICATION-TYPE, OBJECT-IDENTITY
FROM SNMPv2-SMI -- RFC 1442/1902/2578
DisplayString, RowStatus, TruthValue
FROM SNMPv2-TC -- RFC 1443/1903/2579
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- RFC 1444/1904/2580
hrDeviceIndex
FROM HOST-RESOURCES-MIB
PresentOnOff,
prtGeneralEntry,
prtInputEntry,
prtOutputEntry,
prtChannelEntry,
prtInterpreterEntry,
prtInterpreterIndex,
-- prtLocalizationIndex,
prtConsoleLocalization,
prtLocalizationLanguage,
prtLocalizationCountry,
prtLocalizationCharacterSet
FROM Printer-MIB -- Successor to RFC 1759
xeroxCommonMIB
FROM XEROX-COMMON-MIB
Cardinal32, Ordinal32,
XcmFixedLocaleDisplayString,
XcmGenRowPersistence
FROM XEROX-GENERAL-TC
XcmPrtAuxSheetContent,
XcmPrtAuxSheetType,
XcmPrtGroupSupport,
XcmPrtIETFPrintMIBGroupSupport,
XcmPrtMediaTypeErrorPolicy,
XcmPrtMediumClassType,
XcmPrtMediumSize,
XcmPrtOutputOffsetStackingType,
XcmPrtOutputStaplePosition,
XcmPrtPageSizeErrorPolicy,
XcmPrtPCLFontSource,
XcmPrtPlex,
XcmPrtPrintQuality,
XcmPrtPrintScreen,
XcmPrtTraySwitch,
XcmPrtGeneralMonoPrintOpt,
XcmPrtOutputPunchPosition,
XcmPrtInputTraysConfiguration,
-- FROM XEROX-PRINTER-EXT-TC;
XcmPrtFinisherDFAType,
XcmPrtHighCapacityFeederType,
XcmPrtHolePunchUnitType,
XcmPrtFaxOutType,
XcmPrtPhaserModuleType,
XcmPrtPrintEngineType,
XcmPrtAsciiJobTicketType,
XcmPrtAuthenticationModeType,
XcmPrtHoldForAuthenModeType,
XcmPrtAccountingSystemType
FROM XEROX-PRINTER-EXT-TC;
xcmPrintMIB MODULE-IDENTITY
LAST-UPDATED "1304020000Z" -- 2 digit year, April 10, 2013
ORGANIZATION "Xerox Common Management Interface Working Group"
CONTACT-INFO "
XCMI Editors
E-Mail: coherence@crt.xerox.com
--
--
"
DESCRIPTION "
Version: 6.006.pub
Xerox XCMI Extension to IETF Printer MIB Module.
This Module provides extension to the IETF Printer MIB.
Copyright (C) 1997-2013 Xerox Corporation. All Rights Reserved."
::= { xeroxCommonMIB 55 }
--
-- Groups in the XEROX-PRINTER-EXT-MIB
--
xcmPrtBase OBJECT IDENTIFIER ::= { xcmPrintMIB 1 }
xcmPrtGeneral OBJECT IDENTIFIER ::= { xcmPrintMIB 5 }
-- 3/14/2013 Per Steve Rodriquez Tom Silver
xcmPrtDriverOptions OBJECT IDENTIFIER ::= { xcmPrintMIB 6 }
--
xcmPrtInput OBJECT IDENTIFIER ::= { xcmPrintMIB 8 }
xcmPrtOutput OBJECT IDENTIFIER ::= { xcmPrintMIB 9 }
xcmPrtChannel OBJECT IDENTIFIER ::= { xcmPrintMIB 14 }
xcmPrtInterpreter OBJECT IDENTIFIER ::= { xcmPrintMIB 15 }
xcmPrtInputAlias OBJECT IDENTIFIER ::= { xcmPrintMIB 50 }
xcmPrtAuxSheet OBJECT IDENTIFIER ::= { xcmPrintMIB 52 }
xcmPrtAuxPackage OBJECT IDENTIFIER ::= { xcmPrintMIB 60 }
xcmPrtMediumTypeSupported OBJECT IDENTIFIER ::= { xcmPrintMIB 75 }
xcmPrtInterpPCL OBJECT IDENTIFIER ::= { xcmPrintMIB 70 }
--
-- Base Group (Mandatory)
--
-- Implementation of the xcmPrtBaseGroup is mandatory.
--
-- Usage: Conforming management agents which implement this
-- group shall ALWAYS implement all of the mandatory groups
-- and all of the applicable conditionally mandatory groups
-- in the IETF Printer MIB.
xcmPrtBaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of general counters and information for ease of use of
the XCMI Extension to IETF Printer MIB Module and the
IETF Printer MIB on this host system.
Usage: The ONLY valid row in the 'xcmPrtBaseTable'
shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1')."
::= { xcmPrtBase 2 }
xcmPrtBaseEntry OBJECT-TYPE
SYNTAX XcmPrtBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of general counters and information for ease of use of
the XCMI Extension to IETF Printer MIB Module and the
IETF Printer MIB on this host system.
Usage: The ONLY valid row in the 'xcmPrtBaseTable'
shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1')."
INDEX { xcmPrtBaseIndex }
::= { xcmPrtBaseTable 1 }
XcmPrtBaseEntry ::= SEQUENCE {
-- xcmPrtBaseGroup
xcmPrtBaseIndex Ordinal32,
xcmPrtBaseRowStatus RowStatus,
xcmPrtBaseGroupSupport XcmPrtGroupSupport,
xcmPrtBaseUpdateSupport XcmPrtGroupSupport,
xcmPrtBaseCreateSupport XcmPrtGroupSupport,
xcmPrtBaseIETFMIBGroupSupport XcmPrtIETFPrintMIBGroupSupport,
xcmPrtBaseIETFMIBUpdateSupport XcmPrtIETFPrintMIBGroupSupport,
xcmPrtBaseIETFMIBCreateSupport XcmPrtIETFPrintMIBGroupSupport
}
xcmPrtBaseIndex OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value used by this host system to identify this
conceptual row in the 'xcmPrtBaseTable'.
Usage: The ONLY valid row in the 'xcmPrtBaseTable'
shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1')."
::= { xcmPrtBaseEntry 1 }
xcmPrtBaseRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to display status of the ONLY valid
conceptual row in the 'xcmPrtBaseTable'.
Usage: 'xcmPrtBaseRowStatus' is 'read-only' because
the ONLY valid conceptual row shall NOT be deleted."
::= { xcmPrtBaseEntry 2 }
xcmPrtBaseGroupSupport OBJECT-TYPE
SYNTAX XcmPrtGroupSupport
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects which are
supported by this management agent implementation (ie, version)
on this host system, specified in a bit-mask."
DEFVAL { 0 } -- no mandatory groups
::= { xcmPrtBaseEntry 3 }
xcmPrtBaseUpdateSupport OBJECT-TYPE
SYNTAX XcmPrtGroupSupport
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects which are
supported for existing row update (via SNMP Set-Request PDUs)
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask."
DEFVAL { 0 } -- no existing row update groups
::= { xcmPrtBaseEntry 4 }
xcmPrtBaseCreateSupport OBJECT-TYPE
SYNTAX XcmPrtGroupSupport
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects which are
supported for dynamic row creation (via '...RowStatus')
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask."
DEFVAL { 0 } -- no dynamic row create groups
::= { xcmPrtBaseEntry 5 }
xcmPrtBaseIETFMIBGroupSupport OBJECT-TYPE
SYNTAX XcmPrtIETFPrintMIBGroupSupport
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects in the IETF Printer MIB
which are supported by this management agent
implementation (ie, version) on this host system,
specified in a bit-mask."
REFERENCE "See: IETF Printer MIB"
DEFVAL { 127525 } -- (1F225H) mandatory groups
::= { xcmPrtBaseEntry 6 }
xcmPrtBaseIETFMIBUpdateSupport OBJECT-TYPE
SYNTAX XcmPrtIETFPrintMIBGroupSupport
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects in the IETF Printer MIB
supported for existing row update (via SNMP Set-Request PDUs)
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask."
REFERENCE "See: IETF Printer MIB"
DEFVAL { 0 } -- no existing row update groups
::= { xcmPrtBaseEntry 7 }
xcmPrtBaseIETFMIBCreateSupport OBJECT-TYPE
SYNTAX XcmPrtIETFPrintMIBGroupSupport
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects in the IETF Printer MIB
supported for dynamic row creation (via '...RowStatus')
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.
Currently there are no groups within the IETF Printer MIB which
provide for dynamic row creation, and this object shall always
return '0'. Dynamic row creation is provided to these groups
through the XCMI Extension to IETF Printer MIB Module, but
CreateSupport should be reflected in xcmPrtBaseCreateSupport.
This object is included for completeness."
REFERENCE "See: IETF Printer MIB"
DEFVAL { 0 } -- no dynamic row create groups
::= { xcmPrtBaseEntry 8 }
--
-- The Printer MIB General Group Extension (xcmPrtGeneralGroup)
--
-- This group logically augments the Printer MIB's prtGeneral group.
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
xcmPrtGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table of general information per printer.
This table augments the prtGeneralTable."
::= { xcmPrtGeneral 1 }
xcmPrtGeneralEntry OBJECT-TYPE
SYNTAX XcmPrtGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry exists in this table for each device entry in the
hostmib device table whose type is printer."
AUGMENTS { prtGeneralEntry }
::= { xcmPrtGeneralTable 1 }
XcmPrtGeneralEntry ::= SEQUENCE {
-- xcmPrtGeneralGroup
xcmPrtGeneralRowStatus RowStatus,
xcmPrtGeneralAuxSheetPackage Cardinal32,
xcmPrtGeneralManualFeedTimeout Integer32,
xcmPrtGeneralInputAutoSwitch PresentOnOff,
xcmPrtGeneralOutputAutoSwitch PresentOnOff,
xcmPrtGeneralMediumClassDefault XcmPrtMediumClassType,
xcmPrtGeneralDarknessLevels Cardinal32,
xcmPrtGeneralDarknessLevelNorm Cardinal32,
xcmPrtGeneralDarknessLevelDflt Integer32,
xcmPrtGeneralHexDumpEnable PresentOnOff,
xcmPrtGeneralTonerLowStop PresentOnOff,
-- xcmPrtGeneralAuxSheetGroup
xcmPrtGeneralStartupPage PresentOnOff,
xcmPrtGeneralBannerPage PresentOnOff,
xcmPrtGeneralEndBannerPage PresentOnOff,
xcmPrtGeneralTrayLowWarning PresentOnOff,
-- xcmPrtGeneralProdSpecificGroup
xcmPrtGeneralScanlineCompaction PresentOnOff,
xcmPrtGeneralMonoPrintOptimization XcmPrtGeneralMonoPrintOpt,
-- xcmPrtGeneralInstalledOptionsGroup
xcmPrtGeneralInstalledFeeder OCTET STRING (SIZE(0..255)),
xcmPrtGeneralInstalledFinisher OCTET STRING (SIZE(0..255)),
xcmPrtGeneralInstalledAnalogFax OCTET STRING (SIZE(0..255))
}
xcmPrtGeneralRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Manages the status of this conceptual row in the
xcmPrtGeneralTable."
::= { xcmPrtGeneralEntry 1 }
xcmPrtGeneralAuxSheetPackage OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of
auxiliary sheets at the printer box level.
The value zero shall mean not specified."
REFERENCE "
See: xcmPrtInterpAuxSheetPackage
See: xcmPrtChannelAuxSheetPackage
See: xcmPrtGeneralAuxSheetGroup - xcmPrtGeneralStartupPage
See: xcmPrtGeneralAuxSheetGroup - xcmPrtGeneralBannerPage
See: xcmPrtGeneralAuxSheetGroup - xcmPrtGeneralEndBannerPage"
DEFVAL { 0 } -- Not Specified
::= { xcmPrtGeneralEntry 2 }
xcmPrtGeneralManualFeedTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The duration in seconds after which the printer shall either:
(a) switch to another input subunit, if the value of
prtInputNextIndex is non-zero and prtGeneralAutoSwitch is on
or
(b) abort any job waiting for manually fed input, if the value
value of prtInputNextIndex is zero or prtGeneralAutoSwitch
is off or notPresent.
The event which causes the printer to enter the waiting state
is product specific.
A value of (-1) implies 'other' or 'infinite' which translates
to 'this input subunit doesn't support manual feed'.
A value of (-2) implies 'unknown'."
REFERENCE "
This object copied from the April 1996 Printer MIB
prtInputManualFeedTimeout object. This object is currently
in the prtInputTable. The XCMI WG will push in June 1996 to
move this object the prtGeneralTable as done here."
DEFVAL { -1 } -- other or infinite
::= { xcmPrtGeneralEntry 3 }
xcmPrtGeneralInputAutoSwitch OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Indicates the state of the auto input switching feature.
The value notPresent indicates the feature is not currently
supported. Exact behavior of this feature is product specific."
REFERENCE "
This object copied from the April 1996 Printer MIB
prtInputAutoSwitch object. This object is currently
in the prtInputTable. The XCMI WG will push in June 1996,
to move this object the prtGeneralTable as done here."
DEFVAL { notPresent }
::= { xcmPrtGeneralEntry 4 }
xcmPrtGeneralOutputAutoSwitch OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Indicates the state of the auto output tray switching feature.
The value notPresent indicates the feature is not currently
supported. Exact behavior of this feature is product specific."
DEFVAL { notPresent }
::= { xcmPrtGeneralEntry 5 }
xcmPrtGeneralMediumClassDefault OBJECT-TYPE
SYNTAX XcmPrtMediumClassType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object sets the default medium size class for the printer.
This object sets the medium size for printer management
functions such as printing the configuration sheet.
It may affect any media related object, such as form length."
DEFVAL { unknown }
::= { xcmPrtGeneralEntry 6 }
xcmPrtGeneralDarknessLevels OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This value indicates the maximum number of darkness levels
supported by this printer.
The level settings range from 1 to xcmPrtGeneralDarknessLevels
where 1 represents the lightest level and
xcmPrtGeneralDarknessLevels represents the darkest level.
The value 1 implies no user settables.
The value 0 means unspecified.
The selection of a darkness levels specifies that the
printer shall process the page images so that they appear
either 'lighter' or 'darker'."
DEFVAL { 0 } -- unspecified
::= { xcmPrtGeneralEntry 7 }
xcmPrtGeneralDarknessLevelNorm OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The normal setting for the darkness printing object.
The value 0 means unspecified."
DEFVAL { 0 } -- unspecified
::= { xcmPrtGeneralEntry 8 }
xcmPrtGeneralDarknessLevelDflt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The default setting for the density printing option.
The value (-2) indicates unknown.
The value (-4) indicates the auto setting."
REFERENCE "
See: PJL Technical Reference Manual - DENSITY"
DEFVAL { -2 } -- unknown
::= { xcmPrtGeneralEntry 9 }
xcmPrtGeneralHexDumpEnable OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object controls whether the printer is in a special
diagnostic mode wherein all received print data is printed in
hexadecimal format.
Whether a reset or power-cycles turns xcmPrtGeneralHexDumpEnable
to Off is product dependent."
REFERENCE "
See: Printer MIB prtInterpreterLangFamily - langDiagnostic(41)"
DEFVAL { notPresent }
::= { xcmPrtGeneralEntry 10 }
xcmPrtGeneralTonerLowStop OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Indicates the action taken when a low toner condition exists.
'on' indicates that the printer will stop printing when then
toner is low
'off' indicates that printing will continue when the toner is
low
'notPresent' indicates that the printer has no selectable
option for action under a low toner condition."
DEFVAL {notPresent}
::= { xcmPrtGeneralEntry 13 }
--
-- The General Auxiliary Sheet Group (xcmPrtGeneralAuxSheetGroup)
--
-- The auxiliary sheet group allows the administrator to control the
-- production of auxiliary sheets by the printer.
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
-- This Group copied from the v2 Printer MIB dated April 96.
--
xcmPrtGeneralStartupPage OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Used to enable or disable printing a startup page. If
enabled, a startup page will be printed shortly after
power-up, when the device is ready. Typical startup
pages include test patterns and/or printer configuration
information.
Usage: Conforming management agents, which ALSO implement
the the Printer MIB v2, SHALL set 'xcmPrtGeneralStartupPage'
to the SAME value as 'prtAuxiliarySheetStartupPage' (i.e.,
the values of these two objects SHALL be interlocked)."
REFERENCE "
This object copied directly from the April 1996 version of
the Printer MIB's prtGeneralStartupPage object."
DEFVAL { notPresent }
::= { xcmPrtGeneralEntry 11 }
xcmPrtGeneralBannerPage OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Used to enable or disable printing banner pages at the
beginning of jobs. This is a master switch which applies
to all jobs, regardless of interpreter.
Usage: Conforming management agents, which ALSO implement
the the Printer MIB v2, SHALL set 'xcmPrtGeneralBannerPage'
to the SAME value as 'prtAuxiliarySheetBannerPage' (i.e.,
the values of these two objects SHALL be interlocked)."
REFERENCE "
This object copied directly from the April 1996 version of
the Printer MIB's prtGeneralBannerPage object."
DEFVAL { notPresent }
::= { xcmPrtGeneralEntry 12 }
xcmPrtGeneralEndBannerPage OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Used to enable or disable printing banner pages at the
end of jobs. This is a master switch which applies
to all jobs, regardless of interpreter."
DEFVAL { notPresent }
::= { xcmPrtGeneralEntry 14 }
xcmPrtGeneralTrayLowWarning OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Indicates the action taken when a input tray paper condition
'on' indicates that the printer will report the warning over
the user interfaces: Control Panel, CWIS, SNMP, etc.
'off' indicates that printing will not report the warning
'notPresent' indicates that the printer has no selectable
option for a low paper condition."
DEFVAL {notPresent}
::= { xcmPrtGeneralEntry 15 }
--
-- The xcmPrtGeneralGroup (continued)
--
-- The xcmPrt General Group for Product Specific implementations
-- (xcmPrtGeneralProdSpecificGroup)
--
-- This group logically augments the Printer MIB's prtGeneral group,
-- and is a continuation of the xcmPrtGeneralGroup. This object is
-- considered specific to one product.
--
-- Implementation of any object in this group is optional.
--
xcmPrtGeneralScanlineCompaction OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object enables a printing mode wherein the printer
compresses selected scanlines of raster image data as they are
received and holds them in compressed form until they are to
be printed. This allows particular jobs to be processed with
less memory, but often reduced performance as well.
On some Printers, turning this feature Off is referred to as
'PerformanceEnhancement'.
When xcmInterpPageProtect is set to Off,
some complex jobs may not print successfully with minimum
memory. The ScanlineCompaction feature enables printing some
complex jobs without resorting to reserving additional memory
by turning on the PageProtect option or installing additional
memory."
REFERENCE "
See: xcmPrtInterpPageProtect
See: DocuPrint 4517 Network Laser Printers User Guide, Pg. D-12"
DEFVAL { notPresent }
::= { xcmPrtGeneralEntry 50 }
--
-- Added Per Chuck Adams Request 6/13/03
--
xcmPrtGeneralMonoPrintOptimization OBJECT-TYPE
SYNTAX XcmPrtGeneralMonoPrintOpt
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object enables a printing mode wherein the printer
can be set to either one of two modes overall.
Mode 1 is Optimized for Speed,
Mode 2 is Optimized for Economy.
This setting affects the overall performance of the
printer and thus affects all print quality modes."
REFERENCE "
See: Phaser 7750 User Guide... for more information"
DEFVAL { notPresent }
::= { xcmPrtGeneralEntry 51 }
--
-- The xcmPrtGeneralGroup (continued)
--
-- The xcmPrt General Group for Installed Options
-- (xcmPrtGeneralInstalledOptionsGroup)
--
-- This group logically augments the Printer MIB's prtGeneral group,
-- and is a continuation of the xcmPrtGeneralGroup.
--
-- Implementation of any object in this group is optional.
--
xcmPrtGeneralInstalledFeeder OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This object uniquely specifies the currently installed Feeder
hardware. Its purpose is to allow clients to determine via a
single MIB object the number and type of input trays and feeding
options available, based exclusively on the feeder that is
installed."
DEFVAL { "none" }
::= { xcmPrtGeneralEntry 70 }
xcmPrtGeneralInstalledFinisher OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This object uniquely specifies the currently installed Finisher
hardware. Its purpose is to allow clients to determine via a
single MIB object the number and type of output trays and
finishing options available, based exclusively on the finisher
that is installed."
DEFVAL { "none" }
::= { xcmPrtGeneralEntry 71 }
xcmPrtGeneralInstalledAnalogFax OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This object uniquely specifies the currently installed analog
fax card. Its purpose is to allow clients to determine via a
single MIB object whether an analog fax card is installed, and
the options that are available based on the fax card that is
installed."
DEFVAL { "none" }
::= { xcmPrtGeneralEntry 72 }
--
-- Added Per Cyndie Smith 3/16/06
--
xcmPrtGeneralConsoleLocalizationV1EventOID OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The value of the enterprise-specific OID in an SNMPv1
trap sent whenever 'prtConsoleLocalization' in the
industry standard printer mib is updated.
See SNMPv2 trap definition
'xcmPrtGeneralConsoleLocalizationV2Event'
below."
::= { xcmPrtGeneral 2 }
xcmPrtGeneralConsoleLocalizationV2EventPrefix
OBJECT IDENTIFIER ::=
{ xcmPrtGeneralConsoleLocalizationV1EventOID 0 }
xcmPrtGeneralConsoleLocalizationV2Event NOTIFICATION-TYPE
OBJECTS {
prtConsoleLocalization,
-- prtLocalizationIndex,
prtLocalizationLanguage,
prtLocalizationCountry,
prtLocalizationCharacterSet
}
STATUS current
DESCRIPTION
"This trap is sent when the value for prtConsoleLocalization
in the industry standard printer MIB gets updated.
Note: The variable-bindings of this trap have been chosen to
allow for updated prtConsoleLocalization information to be
provided while keeping trap messages reasonably concise
(generally a few hundred octets at most)."
::= { xcmPrtGeneralConsoleLocalizationV2EventPrefix 1 }
--
-- The Printer Driver Options Group (xcmPrtDriverOptionsGroup)
--
-- This group of objects does not augment any existing Printer MIB
-- group.
--
-- The purpose of this group of objects is to support new Microsoft
-- Windows 8 OS functionality. Specifically, Windows 8 now expects
-- print devices to expose installed options so that print drivers
-- can be automatically configured by the Windows 8 OS without any
-- user intervention.
--
-- Implementation of all objects is mandatory.
--
-- NOTE: xcmPrtDriverOptions OIDs 23 thru 49 are reserved for future
-- hardware options.
--
-- Created by T.Silver and S.Rodriguez
-- Last edited 04/3/2013
--
--
-- Printer Hardware Options
xcmPrtDrvrHwdOptStapler OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Stapler Unit is installed within
the print device."
::= { xcmPrtDriverOptions 1 }
xcmPrtDrvrHwdOptDuplexUnit OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Duplex Unit is installed within
the print device."
::= { xcmPrtDriverOptions 2 }
xcmPrtDrvrHwdOptPhaserBookletMaker OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Booklet Maker Module is installed
within the Phaser print device."
::= { xcmPrtDriverOptions 3 }
xcmPrtDrvrHwdOptEnvelopeTray OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if an Envelope Tray is installed within
the print device."
::= { xcmPrtDriverOptions 4 }
xcmPrtDrvrHwdOptCoilPunchUnit OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Coil Punch Unit is installed
within the print device."
::= { xcmPrtDriverOptions 5 }
xcmPrtDrvrHwdOptFinisherDFA OBJECT-TYPE
SYNTAX XcmPrtFinisherDFAType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates the type of Finisher DFA that is
installed within the print device."
::= { xcmPrtDriverOptions 6 }
xcmPrtDrvrHwdOptHighCapacityFeeder OBJECT-TYPE
SYNTAX XcmPrtHighCapacityFeederType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates the type of High Capacity Feeder that
is installed within the print device."
::= { xcmPrtDriverOptions 7 }
xcmPrtDriverOutputDeliveryUnit OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object used to indicate the type of Output Delivery Units that
are installed within the print device. The contents of this
object shall expose a string of valid Output Delivery Unit name
which are seperated by a comma. Valid Output Delivery Unit type
include:
'notInstalled'
'installed'
'phStacker'
'phAdvanced'
'phProfessional'
'offsetCatchTray'
'simpleCatchTray'
'outputBin500Support'
'octMailbox'
'sctMailbox'
'octMailboxStapler'
'sctMailboxStapler'
'basicOfficeFinisher'
'officeFinisher'
'advancedOfficeFinisher'
'standardFinisher'
'professionalFinisher'
'dClassFinisher'
'dBookletMaker'
'dBookletMakerFold'
'd3ClassFinisher'
'd3ClassFinisherHcs'
'sbm'
'standardMff'
'professionalMff'
'bfm'
'ftm'
'bfmBfm'
'bfmBfmFtm'
'hcs'
'ehcs'
'hvf'
'hvfBm'
'bTypeFinisher'
'cTypeFinisher'
'cTypeFinisherBookletMaker'
'phProfessional2'
'dfaCompliant'
'hcss'
'dClassFinisherAdvanced'
'dClassFinisherProfessional'
'dClassFinisherProduction'
'cClassFinisherAdvanced'
'cClassFinisherProfessional'
'sbmFolder'
'standardFinisherMain'
'standardFinisherSb'
'dfaCompliantMain'
'dfaCompliantSb'
'dfaCompliantCustom'
'ehcs80'
'ehcss80'
'hcsDfa'
'hcsHcs'
'hcsHcsDfa'
'D3ClassFinisherHcsHcs'
'css'
'professionalPlusMff'
'bfmFtm'
'aTypeFinisher'
'typeSb'
'typeSbBookletMaker'
'professionalMffMohican'
'ftms'
'bfmFtms'
'ftmsFtms'
'bfmFtmsFtms'
'bfmBfmFtms'
'dFold'
'mainTray'
An example: dClassFinisherProduction,dBookletMaker"
::= { xcmPrtDriverOptions 8 }
xcmPrtDrvrHwdOptHardDrive OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Hard Drive is installed within
the print device."
::= { xcmPrtDriverOptions 9 }
xcmPrtDrvrHwdOptHolePunchUnit OBJECT-TYPE
SYNTAX XcmPrtHolePunchUnitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object used to indicate the type of Hole Punch Unit that is
installed within the print device."
::= { xcmPrtDriverOptions 10 }
xcmPrtDriverInputPaperTrays OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object used to indicate the type of Paper Trays that are
installed within the print device. The contents of this
object shall expose a string of valid Paper Tray names which
are seperated by a comma. Valid paper tray types include:
'notInstalled'
'traysInstalled'
'1Tray'
'2Trays'
'3Trays'
'3TraysHighCapacity'
'4Trays'
'4TraysHighCapacityTandemTray'
'5Trays'
'6Trays'
'extraTraysNotInstalled'
'1ExtraTray'
'2ExtraTrays'
'3ExtraTrays'
'4ExtraTrays'
'5TraysHighCapacityTandemTray'
'6TraysHighCapacity'
'6TraysHighCapacityTandemTray'
An example: 6Trays,2ExtraTrays"
::= { xcmPrtDriverOptions 11 }
xcmPrtDrvrHwdOptInserterUnit OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if an Inserter Unit is installed
within the print device."
::= { xcmPrtDriverOptions 12 }
xcmPrtDrvrHwdOptJobAccountingFdi OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Job Accounting FDI Unit is
installedthe print device."
::= { xcmPrtDriverOptions 13 }
xcmPrtDrvrHwdOptFaxOut OBJECT-TYPE
SYNTAX XcmPrtFaxOutType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Fax Out Unit is installed within
the print device."
::= { xcmPrtDriverOptions 14 }
xcmPrtDrvrHwdOptMemoryInMBs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates the size of physical memory in units
of Megabytes installed within the print device. A value of
zero indicates that no memory is installed."
::= { xcmPrtDriverOptions 15 }
xcmPrtDrvrHwdOptOutputBinSide OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Side Output Bin is installed
within the print device."
::= { xcmPrtDriverOptions 16 }
xcmPrtDrvrHwdOptOutputBinCenter OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Center Output Bin is installed
within the print device."
::= { xcmPrtDriverOptions 17 }
xcmPrtDrvrHwdOptPhaserModule OBJECT-TYPE
SYNTAX XcmPrtPhaserModuleType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indentifies the configuration of the Phaser
print device."
::= { xcmPrtDriverOptions 18 }
xcmPrtDrvrHwdOptPrintEngine OBJECT-TYPE
SYNTAX XcmPrtPrintEngineType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if the print device contains a single
print engine or has two print engines."
::= { xcmPrtDriverOptions 19 }
xcmPrtDrvrHwdOptSquareFoldTrimmer OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Square Fold Trimmer Unit is
installed within the print device."
::= { xcmPrtDriverOptions 20 }
xcmPrtDrvrHwdOptTriFold OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if a Tri-Fold Unit is installed within
the print device."
::= { xcmPrtDriverOptions 21 }
-- Printer Functions
xcmPrtDrvrFntCollation OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if the Collation function is supported
by the print device."
::= { xcmPrtDriverOptions 50 }
xcmPrtDrvrFntAsciiJobTicket OBJECT-TYPE
SYNTAX XcmPrtAsciiJobTicketType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if an ACSII Job Ticket function is
supported by the print device."
::= { xcmPrtDriverOptions 51 }
xcmPrtDrvrFntAuthenticationMode OBJECT-TYPE
SYNTAX XcmPrtAuthenticationModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates the type of Authentication Mode
function that is supported by the print device."
::= { xcmPrtDriverOptions 52 }
xcmPrtDrvrFntHoldForAuthenMode OBJECT-TYPE
SYNTAX XcmPrtHoldForAuthenModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates the type of Hold for Authentication
Mode function that is supported by the print device."
::= { xcmPrtDriverOptions 53 }
xcmPrtDrvrFntEnhancedImageQualityMode OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if the Enhanced Image Quality function
is supported by the print device."
::= { xcmPrtDriverOptions 54 }
xcmPrtDrvrFntProductivityPack OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if the Productivity Pack function
is supported by the print device."
::= { xcmPrtDriverOptions 55 }
xcmPrtDrvrFntJobStorage OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates if the Job Storage software function
is supported by the print device."
::= { xcmPrtDriverOptions 56 }
xcmPrtDrvrFntJobAccountingSystem OBJECT-TYPE
SYNTAX XcmPrtAccountingSystemType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object that indicates the type of Job Accounting System that
is supported by the print device."
::= { xcmPrtDriverOptions 57 }
--
-- The Printer MIB Input group extension (xcmPrtInputGroup)
--
-- This group logically augments the Printer MIB's prtInput group.
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
xcmPrtInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This table logically augments the Printer MIB's prtInputTable."
::= { xcmPrtInput 1 }
xcmPrtInputEntry OBJECT-TYPE
SYNTAX XcmPrtInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Entries may exist for each entry in the prtInputTable."
AUGMENTS { prtInputEntry }
::= { xcmPrtInputTable 1 }
XcmPrtInputEntry ::= SEQUENCE {
xcmPrtInputRowStatus RowStatus,
xcmPrtInputNextPrtInputIndex Integer32,
xcmPrtInputUseCustomSize PresentOnOff,
xcmPrtInputCustDimFeedDirDecl Integer32,
xcmPrtInputCustDimXFeedDirDecl Integer32,
xcmPrtInputTrayPriority Integer32
}
xcmPrtInputRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Manages the status of this conceptual row
in the xcmPrtInputTable."
::= { xcmPrtInputEntry 1 }
xcmPrtInputNextPrtInputIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The value of prtInputIndex corresponding to the input subunit
which will be used when this input subunit is emptied.
The value of zero indicates that auto input switching will not
occur when this input subunit is emptied.
Two different mechanisms for input tray switching,
xcmPrtNextPrtInputIndex and xcmPrtInputAliasGroup, are provided.
A device agent may make use of one or the other, none, or both.
Use the model that fits best for the given application.
Usage: Conforming management agents, which ALSO implement the
the Printer MIB v2, SHALL set 'xcmPrtInputNextPrtInputIndex'
to the SAME value as 'prtInputNextIndex' (i.e., the values of
these two objects SHALL be interlocked)."
REFERENCE "
See: xcmPrtInputAliasGroup
See: xcmPrtInterpTraySwitch"
DEFVAL { 0 }
::= { xcmPrtInputEntry 2 }
xcmPrtInputUseCustomSize OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Specifies how this input subunit determines the paper size to
use.
If the value is 'Off' this input subunit uses the paper size
automatically sensed by the subunit.
If the value is 'On' this input subunit uses the custom
dimensions provided by xcmPrtInputCustDimFeedDirDecl and
xcmPrtInputCustDimXFeedDirDecl."
REFERENCE "
See: xcmPrtInputCustDimFeedDirDecl
See: xcmPrtInputCustDimXFeedDirDecl"
DEFVAL { other } -- not specified
::= { xcmPrtInputEntry 3 }
xcmPrtInputCustDimFeedDirDecl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Provides the dimension, in the feed direction, of the media in
this input subunit, when the value of xcmPrtInputUseCustomSize
is set to 'On'.
When xcmPrtInputUseCustomSize is set to On, this value is copied
to prtInputMediaDimFeedDirDeclared and
prtInputMediaDimFeedDirChosen."
REFERENCE "
See: xcmPrtInputUseCustomSize
See: xcmPrtInputCustDimXFeedDirDecl"
DEFVAL { 0 }
::= { xcmPrtInputEntry 4 }
xcmPrtInputCustDimXFeedDirDecl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Provides the dimension, in the feed direction, of the media in
this input subunit, when the value of xcmPrtInputUseCustomSize
is set to 'On'.
When xcmPrtInputUseCustomSize is set to 'On', this value is
copied to prtInputMediaDimFeedDirDeclared and
prtInputMediaDimFeedDirChosen."
REFERENCE "
See: xcmPrtInputUseCustomSize
See: xcmPrtInputCustDimFeedDirDecl"
DEFVAL { 0 }
::= { xcmPrtInputEntry 5 }
xcmPrtInputTrayPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The current priority of this tray. This value/mechanism
is independent of xcmPrtNextPrtInputIndex and
xcmPrtInputAliasGroup.
Usage: The priority of this device, where '0' is
unspecified (default), '1' is lowest, and '100' is highest."
REFERENCE "
See: xcmPrtNextPrtInputIndex
See: xcmPrtInputAliasGroup"
DEFVAL { 0 } -- unspecified device priority
::= { xcmPrtInputEntry 6 }
-- The Printer MIB Input Group extension (xcmPrtInputTrayGroup)
--
-- This group logically augments the Printer MIB's prtInput group.
-- It is not an extension to the prtInputTable.
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
xcmPrtInputTrayTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtInputTrayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This table logically augments the Printer MIB's Input Group."
::= { xcmPrtInput 2 }
xcmPrtInputTrayEntry OBJECT-TYPE
SYNTAX XcmPrtInputTrayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Entries may exist for each unique hrDeviceIndex entry in the
prtInputTable."
INDEX { hrDeviceIndex }
::= { xcmPrtInputTrayTable 1 }
XcmPrtInputTrayEntry ::= SEQUENCE {
xcmPrtInputTraysRowStatus RowStatus,
xcmPrtInputTraysInstalled Integer32,
xcmPrtInputTraysConfiguration XcmPrtInputTraysConfiguration
}
xcmPrtInputTraysRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Manages the status of this conceptual row
in the xcmPrtInputTrayTable."
::= { xcmPrtInputTrayEntry 1 }
xcmPrtInputTraysInstalled OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The number of printer input trays installed on this device. This
is read-only on devices that are able to determine this value at
The value is read-write on devices that do not know how many inpu
trays are installed on the device.
The value reported must match the number of rows in prtInputTable
for each unique hrDeviceIndex in that table.
Input trays for finisher units are not reported by this value."
DEFVAL { 1 }
::= { xcmPrtInputTrayEntry 2 }
xcmPrtInputTraysConfiguration OBJECT-TYPE
SYNTAX XcmPrtInputTraysConfiguration
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This single object represents the input tray configuration
for the entire machine. The value exposed by this object
will be utilized by Xerox print driver software and the
Microsoft OS."
DEFVAL { undefined }
::= { xcmPrtInputTrayEntry 3 }
-- The Printer MIB Output group extension (xcmPrtOutputGroup)
--
-- This group logically augments the Printer MIB's prtOutput group.
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
xcmPrtOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This table logically augments the prtOutputTable in the
Printer MIB."
::= { xcmPrtOutput 1 }
xcmPrtOutputEntry OBJECT-TYPE
SYNTAX XcmPrtOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Entries may exist for each entry in the prtOutputTable."
AUGMENTS { prtOutputEntry }
::= { xcmPrtOutputTable 1 }
XcmPrtOutputEntry ::= SEQUENCE {
-- xcmPrtOutputGroup
xcmPrtOutputRowStatus RowStatus,
xcmPrtOutputNextIndex Integer32,
xcmPrtOutputPassword OCTET STRING (SIZE(0..255)),
xcmPrtOutputOffsetStackingType XcmPrtOutputOffsetStackingType,
xcmPrtOutputTrayTimeoutSupport PresentOnOff,
xcmPrtOutputTrayTimeout Cardinal32,
-- xcmPrtOutputFinishingGroup
xcmPrtOutputStaple PresentOnOff,
xcmPrtOutputStaplePosSupported XcmPrtOutputStaplePosition,
xcmPrtOutputStapleDefault PresentOnOff,
xcmPrtOutputStaplePosDefault XcmPrtOutputStaplePosition,
xcmPrtOutputPunch PresentOnOff,
xcmPrtOutputPunchDefault PresentOnOff,
xcmPrtOutputPunchPosSupported XcmPrtOutputPunchPosition,
xcmPrtOutputBookletFoldStaple PresentOnOff
}
xcmPrtOutputRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Manages the status of this conceptual row in the
xcmPrtOutputTable."
::= { xcmPrtOutputEntry 1 }
xcmPrtOutputNextIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The value of prtOutputIndex corresponding to the output subunit
which will be used when this output subunit is filled.
A value of zero(0) indicates that auto output switching will not
occur when this output subunit is filled."
DEFVAL { 0 }
::= { xcmPrtOutputEntry 2 }
xcmPrtOutputPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used as the password for an Output Tray, e.g. an
output mailbox. It is the value that must be entered to open
the output tray."
REFERENCE "See: prtOutputSecurity."
DEFVAL { ''H }
::= { xcmPrtOutputEntry 3 }
xcmPrtOutputOffsetStackingType OBJECT-TYPE
SYNTAX XcmPrtOutputOffsetStackingType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object further refines the type of offset stacking from
that specified by the object prtOutputOffsetStacking in the
Printer MIB."
REFERENCE "
See: prtOutputOffsetStacking
See: xcmPrtInterpOffsetStackingType"
DEFVAL { notSpecified }
::= { xcmPrtOutputEntry 4 }
xcmPrtOutputTrayTimeoutSupport OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Determines whether the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.
'On' indicates that would should wait as specified by
xcmPrtOutputTrayTimeout.
'Off' indicates this feature is off and should immediately
seek to send the printed output to another destination.
The value 'other' shall mean not specified."
REFERENCE "See: xcmPrtOutputTrayTimeout"
DEFVAL { other } -- not specified
::= { xcmPrtOutputEntry 5 }
xcmPrtOutputTrayTimeout OBJECT-TYPE
SYNTAX Cardinal32
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Determines how long the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.
A value of (0) implies 'other' or 'infinite' which translates
to this input subunit does not support this feature."
DEFVAL { 0 } -- other or infinite
::= { xcmPrtOutputEntry 6 }
--
-- The Output Finishing Group (xcmPrtOutputFinishingGroup)
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
xcmPrtOutputStaple OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object declares whether the printer has the ability to
staple multi-page documents delivered to the specified output
destination, and whether this ability is currently turned on.
'on' indicates stapling is supported to this output destination,
and that it is turned on.
'off' indicates this printer supports stapling to this output
destination, but that it is turned off. If a job calls for a
staple, none will be given.
'notPresent' indicates that this printer does not support
stapling to this output destination.
The value 'other' shall mean not specified."
REFERENCE "
See: 'xcmPrtOutputStapleDefault
See: 'xcmPrtOutputStaplePosSupported'
See: 'xcmPrtOutputStaplePosDefault'"
DEFVAL { other } -- not specified
::= { xcmPrtOutputEntry 100 }
xcmPrtOutputStaplePosSupported OBJECT-TYPE
SYNTAX XcmPrtOutputStaplePosition
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object declares the stapling positions supported."
REFERENCE "
See: 'xcmPrtOutputStaple'
See: 'xcmPrtOutputStapleDefault'
See: 'xcmPrtOutputStaplePosDefault'"
DEFVAL { 0 } -- No staple positions supported
::= { xcmPrtOutputEntry 101 }
xcmPrtOutputStapleDefault OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object declares for the cases where the job-stream does not
specify whether to staple a particular job, whether the printer
should apply the default staple specified in
xcmPrtOutputStaplePosDefault for this output destination.
'on' indicates the staple default feature is supported
for this output destination, and that a job not specifying
whether to staple should be supplied a staple per the
'xcmPrtOutputStaplePosDefault' object.
If stapling is disabled, the document will not be stapled.
'off' indicates the staple default feature is supported
for this output destination, but that it is turned off. Jobs
not specifying whether to staple, will not be stapled.
'notPresent' indicates the staple default feature is not
supported. Jobs not specifying whether to staple, will not
be stapled.
The value 'other' shall mean not specified."
REFERENCE "
See: 'xcmPrtOutputStaple
See: 'xcmPrtOutputStaplePosSupported'
See: 'xcmPrtOutputStaplePosDefault'"
DEFVAL { other } -- not specified
::= { xcmPrtOutputEntry 102 }
xcmPrtOutputStaplePosDefault OBJECT-TYPE
SYNTAX XcmPrtOutputStaplePosition
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object controls the default staple position to be used
when stapling is enabled, and the job-stream does not specify
whether to staple the particular job or the job-stream
specifies to apply a staple, but does not specify where.
Only one staple position may be declared.
The value of zero indicates a default of not staple."
REFERENCE "
See: 'xcmPrtOutputStaple'
See: 'xcmPrtOutputStapleDefault'
See: 'xcmPrtOutputStaplePosSupported'"
DEFVAL { 0 } -- Default is to not staple
::= { xcmPrtOutputEntry 103 }
xcmPrtOutputPunch OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object declares whether the printer has the ability to
punch holes in documents delivered to the specified output
destination, and whether this ability is currently turned on.
'on' indicates hole punching is supported to this output
destination and that it is turned on
'off' indicates this printer supports hole punching to this
output destination, but that it is turned off. If a job calls
for punched output, no punching will occur.
'not Present' indicates that this printer does not support
hole punching."
DEFVAL { notPresent}
::= {xcmPrtOutputEntry 104}
xcmPrtOutputPunchDefault OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object declares whether the printer will punch the job
when the print stream does not specify a punch requirement.
'on' indicates hole punching is supported to this output
destination and that the job will be punched if the data
stream contains no job punch information
'off' indicates this printer supports hole punching to this
output destination, and that the job will not be punched if
the data stream contains no job punch information
'not Present' indicates that this printer does not support
hole punching."
DEFVAL { notPresent}
::= {xcmPrtOutputEntry 105}
--
--
xcmPrtOutputPunchPosSupported OBJECT-TYPE
SYNTAX XcmPrtOutputPunchPosition
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object declares the punch positions supported."
REFERENCE "
See: 'xcmPrtOutputPunch'"
DEFVAL { 0 } -- No punch positions supported
::= {xcmPrtOutputEntry 106}
xcmPrtOutputBookletFoldStaple OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object declares whether the device has the ability to
fold and or staple booklet documents delivered to the specifie
output destination, and whether this ability is currently turn
on indicates booklet folding and/or stapling is supported to
output destination and that it is turned on.
off indicates booklet folding and/or stapling is supported to
but that it is turned off. If a job calls for a
booklet folding and/or staple, none will be given.
notPresent indicates booklet folding and/or stapling is
not supported.
The value other shall mean not specified."
DEFVAL { notPresent } -- Not installed
::= { xcmPrtOutputEntry 107 }
--
-- The Printer MIB Channel group extension (xcmPrtChannelGroup)
--
-- This group logically augments the Printer MIB's prtChannel group.
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
xcmPrtChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This table logically augments Printer MIB's prtChannelTable."
::= { xcmPrtChannel 1 }
xcmPrtChannelEntry OBJECT-TYPE
SYNTAX XcmPrtChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry exists corresponding to each entry in the
prtChannelTable."
AUGMENTS { prtChannelEntry }
::= { xcmPrtChannelTable 1 }
XcmPrtChannelEntry ::= SEQUENCE {
xcmPrtChannelRowStatus RowStatus,
xcmPrtChannelEOJTimeout Cardinal32,
xcmPrtChannelAuxSheetPackage Cardinal32,
xcmPrtChannelSpoolingEnable PresentOnOff,
xcmPrtChannelLangSensing PresentOnOff,
xcmPrtChannelBinaryPostScript PresentOnOff,
-- xcmPrtChannelProductSpecificGroup
xcmPrtChannelAutoJobEnd PresentOnOff,
xcmPrtChannelBinaryPostScriptZ PresentOnOff
}
xcmPrtChannelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Manages the status of this conceptual row in the
xcmPrtChannelTable."
::= { xcmPrtChannelEntry 1 }
xcmPrtChannelEOJTimeout OBJECT-TYPE
SYNTAX Cardinal32
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Defines the number of seconds that the channel waits before
timing out. For example, this may be used for the parallel
channel.
The value zero means infinite or no timeout on the channel."
DEFVAL { 0 } -- No timeout
::= { xcmPrtChannelEntry 2 }
xcmPrtChannelAuxSheetPackage OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of
auxiliary sheets by this channel.
The value zero shall mean not specified."
REFERENCE "
See: xcmPrtGeneralAuxSheetPackage
See: xcmPrtInterpAuxSheetPackage"
DEFVAL { 0 } -- Not specified
::= { xcmPrtChannelEntry 3 }
xcmPrtChannelSpoolingEnable OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object controls spooling to a large data store such as a
hard disk.
When set to On, data received and waiting to be processed from
any port is spooled onto the large data store and later
retrieved for processing. This allows the printer to receive
the data more rapidly, thus freeing the data source sooner.
It may also increase throughput by having the next job's print
data already local for processing.
When set to Off, the spooling feature is disabled.
Data received is not spooled to the large data store, and is
accepted by the printer only as needed for printing.
You may want to disable this spooling feature if spooling is
already done outside the printer; having the spooling done on
the printer as well, may not add value, and may create error
recovery and queue monitoring difficulties.
The value 'other' shall mean not specified."
REFERENCE "
DocuPrint 4517 Network Laser Printers User Guide, pg. D-5."
DEFVAL { other } -- not specified
::= { xcmPrtChannelEntry 4 }
xcmPrtChannelLangSensing OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object indicates whether the channel supports detection of
the input PDL language type, and if so, whether the feature is
enabled.
Currently, the prtChannelDefaultPageDescLangIndex points to the
Page Description Language Interpreter for this channel. One of
the PDL types enumerated in the prtInterpreterLangFamily object
is langAutomatic(37), to be used for automatic PDL sensing;
however, if the language sensing fails there is no fallback
language for the channel.
Conforming implementations shall use xcmPrtChannelLangSensing
for each channel and deprecate use of the langAutomatic(37) enum
in favor of the literal default language in the
prtInterpreterLangFamily object.
The value 'other' shall mean not specified."
REFERENCE "
See: Printer MIB prtInterpreterLangFamily"
DEFVAL { other } -- not specified
::= { xcmPrtChannelEntry 5 }
xcmPrtChannelBinaryPostScript OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
If 'On' PostScript received over this channel is
processed as pure binary data.
If 'Off' PostScript is interpretted as ASCII or TBCP data.
The value 'other' shall mean not specified."
REFERENCE "
See: Printer MIB prtInterpreterLangFamily
See: xcmPrtChannelBinaryPostScriptZ"
DEFVAL { other } -- not specified
::= { xcmPrtChannelEntry 6 }
-- xcmPrt Channel Group for Product Specific implementions
-- (xcmPrtChannelProdSpecificGroup)
--
-- This group logically augments the Printer MIB's prtChannel group,
-- and is a continuation of the xcmPrtChannelGroup. These objects
-- are considered specific to one product.
--
-- Implementation of any object in this group is optional.
--
xcmPrtChannelAutoJobEnd OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Controls automatic ending of a print job that does not finish
printing.
When 'On', after the current print job has paused long enough
to exceed the xcmPrtChannelEOJTimeout interval,
the current print job will be stopped.
When 'Off', the print job does not end after the timeout
interval. Instead, the printer waits to continue until another
print job is received on any port. A partial page will remain
unprinted until the next print job is received. The current
job will then be stopped.
The value 'other' shall indicate not specified."
REFERENCE "
See: xcmPrtChannelEOJTimeout
See: Xerox 4517+ User Guide
See: Xerox 4505 User Guide"
DEFVAL { other } -- not specified
::= { xcmPrtChannelEntry 80 }
xcmPrtChannelBinaryPostScriptZ OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
If 'On' PostScript received over this channel is
processed as pure binary data.
If 'Off' PostScript is interpretted as ASCII or TBCP data.
The value 'other' shall mean not specified.
Devices should NOT implement this object, should instead
implement the equivalent object xcmPrtChannelBinaryPostScript.
This xcmPrtChannelBinaryPostScriptZ object appears for
backward compatibility support only, since some few devices
implemented the object at this OID. Clients/managers wishing
to support those devices should try to access both objects
(which generally can be done with a single SNMP message packet
combining requests for both object OIDs) and use whichever
object is present in the device."
REFERENCE "
See: xcmPrtChannelBinaryPostScript
See: Printer MIB prtInterpreterLangFamily"
DEFVAL { other } -- not specified
::= { xcmPrtChannelEntry 81 }
--
-- The Printer MIB Interpreter group extension (xcmPrtInterpreterGroup)
--
-- This group logically augments the Printer MIB's prtInterpreter group.
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
xcmPrtInterpreterTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtInterpreterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This table logically augments the Printer MIB's
prtInterpreterTable."
::= { xcmPrtInterpreter 1 }
xcmPrtInterpreterEntry OBJECT-TYPE
SYNTAX XcmPrtInterpreterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry exists corresponding to each entry in the
prtInterpreterTable."
AUGMENTS { prtInterpreterEntry }
::= { xcmPrtInterpreterTable 1 }
XcmPrtInterpreterEntry ::= SEQUENCE {
-- xcmPrtInterpreterGroup
xcmPrtInterpRowStatus RowStatus,
xcmPrtInterpAuxSheetPackage Cardinal32,
xcmPrtInterpContextSaving PresentOnOff,
xcmPrtInterpEdgeEnhancement PresentOnOff,
xcmPrtInterpFontIndexDefault Integer32,
xcmPrtInterpGrayLevels Cardinal32,
xcmPrtInterpGrayLevelDefault Cardinal32,
xcmPrtInterpJamRecovery PresentOnOff,
xcmPrtInterpJobCopiesDefault Ordinal32,
xcmPrtInterpLineWrap PresentOnOff,
xcmPrtInterpMediumSizeDefault XcmPrtMediumSize,
xcmPrtInterpPageProtect PresentOnOff,
xcmPrtInterpPageProtectSize XcmPrtMediumSize,
xcmPrtInterpPageSizeErrorPolicy XcmPrtPageSizeErrorPolicy,
xcmPrtInterpPlexSupported XcmPrtPlex,
xcmPrtInterpPlexDefault XcmPrtPlex,
xcmPrtInterpPrintEdgeToEdge PresentOnOff,
xcmPrtInterpPrintQuality XcmPrtPrintQuality,
xcmPrtInterpPrtInputIndexDflt Cardinal32,
xcmPrtInterpPrtOutputIndexDflt Cardinal32,
xcmPrtInterpResFeedDirDefault Cardinal32,
xcmPrtInterpResXFeedDirDefault Cardinal32,
xcmPrtInterpResIPResIndex Cardinal32,
xcmPrtInterpResIPResIndexDflt Cardinal32,
xcmPrtInterpTextFormLength Cardinal32,
xcmPrtInterpTimeoutJob Cardinal32,
xcmPrtInterpTimeoutPage Cardinal32,
xcmPrtInterpInputAliasIndexDflt Cardinal32,
xcmPrtInterpTraySwitch XcmPrtTraySwitch,
xcmPrtInterpMediumTypeDefault
XcmFixedLocaleDisplayString (SIZE(0..255)),
xcmPrtInterpMediaTypeErrPolicy XcmPrtMediaTypeErrorPolicy,
xcmPrtInterpErrorPolicyTimeout Cardinal32,
xcmPrtInterpLineTerm PresentOnOff,
xcmPrtInterpEnhancedResolution PresentOnOff,
-- xcmPrtInterpProdSpecific01Group
xcmPrtInterpAutoContinue PresentOnOff,
xcmPrtInterpEnvFeederSize XcmPrtMediumSize,
xcmPrtInterpManualFeedPgSize XcmPrtMediumSize,
xcmPrtInterpOffsetStackingType XcmPrtOutputOffsetStackingType,
-- Requested by: Cyndi Moskal 8/12/03
-- Feature team: PCL barcodes
xcmPrtInterpProcessBarcodes PresentOnOff
}
xcmPrtInterpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Manages the status of this conceptual row in the
xcmPrtInterpreterTable."
::= { xcmPrtInterpreterEntry 1 }
xcmPrtInterpAuxSheetPackage OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of
auxiliary sheets by this interpreter.
The value zero shall mean not specified."
REFERENCE "
See: xcmPrtGeneralAuxSheetPackage
See: xcmPrtChannelAuxSheetPackage"
DEFVAL { 0 } -- Not specified
::= { xcmPrtInterpreterEntry 2 }
xcmPrtInterpContextSaving OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Enables reserving memory for saving permanently downloaded fonts
and macros, when the printer switches between this and another
interpreter. The effect is to save the memory for a subsequent
job using this interpreter.
When set to Off, all permanently downloaded fonts and macros are
cleared from memory when switching PDLs. They must be
downloaded again when the printer switches back to using the
current PDL.
When set to On, permanently downloaded fonts and macros are
stored in printer memory. You eliminate the time to download
them again when the printer switches back to the current PDL.
In PCL, this is referred to as Resource Savings.
The value 'other' shall mean not specified."
REFERENCE "
DocuPrint 4517 Network Laser Printers User Guide, Pg. D-16."
DEFVAL { other } -- not specified
::= { xcmPrtInterpreterEntry 3 }
xcmPrtInterpEdgeEnhancement OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Specifies whether the printer should perform EdgeEnhancement of
the image of the printed document for this interpreter.
The value 'other' shall mean not specified."
DEFVAL { other } -- not specified
::= { xcmPrtInterpreterEntry 4 }
xcmPrtInterpFontIndexDefault OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The value of xcmFontIndex corresponding to the xcmFontEntry
which represents the default font for this Interpreter.
A value of (-1) means 'other'.
A value of (-2) means 'unknown'.
A value of (-3) means 'notPresent'.
A value of 'other' (-3) should be used for those
interpreters which have no default font (e.g. PostScript).
For agents that choose not to implement the Resources MIB,
this object specifies the ID of the default font. This use
of this object is significant only to the specific product."
DEFVAL { -2 } -- unknown
::= { xcmPrtInterpreterEntry 5 }
xcmPrtInterpGrayLevels OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object describes the gray levels supported by this
interpreter. This may represent gray levels within a color
plane.
The value zero means not specified for this interpreter."
DEFVAL { 0 } -- Not specified.
::= { xcmPrtInterpreterEntry 6 }
xcmPrtInterpGrayLevelDefault OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object controls the number of gray scales for this
interpreter.
The value zero means not specified for this interpreter."
REFERENCE "See: xcmPrtInterpGrayLevels"
DEFVAL { 0 } -- not Specified.
::= { xcmPrtInterpreterEntry 7 }
xcmPrtInterpJamRecovery OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object controls how the printer recovers from a paper jam.
When set to On, the printer reprints any pages in the printer at
the time of the jam, after the jam has been cleared. The
printer does this by using a portion of memory to store print
data. This may slow throughput.
When set to Off, some pages may be lost after the jam has been
cleared. The print job must be re-sent, specifying those pages
that did not print as a result of the paper jam.
The value 'other' shall mean not specified."
REFERENCE "
DocuPrint 4517 Network Laser Printers User Guide, Pg. D-9."
DEFVAL { other } -- not specified
::= { xcmPrtInterpreterEntry 8 }
xcmPrtInterpJobCopiesDefault OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This defines the default number of job copies to be printed
by this interpreter.
If set incorrectly, this object may cause difficulties at
customer sites. Agent developers should consider making this
object read-only, permanently set to one copy."
REFERENCE "
See: ISO/IEC 10175-1:1996(E)
- Section 9.2.2.1: Results-profile job-copies
See: PJL Technical Reference Manual - COPIES
See: PCL 5 Printer Language Technical Reference Manual
- Number of Copies Command"
DEFVAL { 1 } -- One copy
::= { xcmPrtInterpreterEntry 9 }
xcmPrtInterpLineWrap OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object controls whether long lines are wrapped or
truncated.
If On, long lines wrap to the next line.
If Off, long lines are truncated.
Note the meaning of 'long' depends on the orientation and the
current page size.
The value 'other' shall mean not specified."
REFERENCE "
Adobe PostScript Language Reference Manual Supplement."
DEFVAL { other } -- not specified
::= { xcmPrtInterpreterEntry 10 }
xcmPrtInterpMediumSizeDefault OBJECT-TYPE
SYNTAX XcmPrtMediumSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object specifies the default medium size for an
interpreter. It is used if no medium size is specified.
For PCL, this object sets the General PJL Environment variable
'Paper'.
The xcmPrtInterpMediumSizeDefault object may be affected by
setting the xcmPrtGeneralMediumClassDefault object."
REFERENCE "
See: PCL 5 Printer Language Technical Reference Manual
See: PJL Technical Reference Manual - PAPER
See: xcmPrtGeneralMediumClassDefault"
DEFVAL { notSpecified }
::= { xcmPrtInterpreterEntry 11 }
xcmPrtInterpPageProtect OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object enables reserving sufficient memory for printing
complex pages, thus avoiding Page Too Complex errors.
The amount of memory reserved is implementation specific.
When this feature is turned on, printer performance may
be slowed.
The value 'other' shall mean not specified."
REFERENCE "
DocuPrint 4517 Network Laser Printers User Guide, Pg. D-11."
DEFVAL { other } -- not specified
::= { xcmPrtInterpreterEntry 12 }
xcmPrtInterpPageProtectSize OBJECT-TYPE
SYNTAX XcmPrtMediumSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object sets the PageSize to be used by this interpreter
in reserving sufficient memory for printing complex pages,
thus avoiding Page Too Complex Errors.
The actual amount of memory to be reserved as a function of the
specified page size is implementation specific. When this
feature is turned on, printer performance may be slowed.
In PCL, this object supports the General PJL Environment
Variable 'PAGEPROTECT'. This object the sets the page
protection configuration.
The page protection feature reserves a block of printer memory
to prevent printer overrun errors when formatting very dense
or complex images. This variable may be set to any legal
value at any time, regardless of the current amount of free
memory or the currently set resolution.
When a job is sent, if there is not enough memory to print
correctly with the current resolution and page protection
configuration, the system temporarily overrides the resolution
and/or page protect values to run the job.
When the page protection status is changed, memory may be
reconfigured, and all downloaded fonts, PCL macros, and
PostScript dictionaries may be lost.
The value notSpecified shall also mean Off."
REFERENCE "
See: Printer Job Language Technical Reference Manual
- General PJL Environment Variable 'PAGEPROTECT'"
DEFVAL { notSpecified } -- not specified or Off.
::= { xcmPrtInterpreterEntry 13 }
xcmPrtInterpPageSizeErrorPolicy OBJECT-TYPE
SYNTAX XcmPrtPageSizeErrorPolicy
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Controls interpreter behavior when the requested Page Size
is not currently available."
REFERENCE "
See: xcmPrtInterpMediaTypeErrPolicy
See: xcmPrtInterpErrorPolicyTimeout"
DEFVAL { notSpecified }
::= { xcmPrtInterpreterEntry 14 }
xcmPrtInterpPlexSupported OBJECT-TYPE
SYNTAX XcmPrtPlex
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object specifies the Plex modes supported by this
interpreter. These Plex modes specify the relative
orientations between consecutive pages, and capabilities of
printing one-side, two-sided or both. "
DEFVAL { 0 } -- not specified
::= { xcmPrtInterpreterEntry 15 }
xcmPrtInterpPlexDefault OBJECT-TYPE
SYNTAX XcmPrtPlex
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object specifies the default plex for this interpreter.
The device shall set no more than one bit.
The value zero shall indicate not specified."
REFERENCE "See: xcmPrtInterpPlexSupported"
DEFVAL { 0 } -- not specified
::= { xcmPrtInterpreterEntry 16 }
xcmPrtInterpPrintEdgeToEdge OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Enables edge to edge printing for interpreters that try to
enforce a coordinate system that is offset from the edge of the
paper, e.g., PCL.
When On, jobs are printed to the edge of the paper.
When Off, jobs are printed in normal printable area of page.
The value 'other' shall mean not specified."
DEFVAL { other } -- not specified
::= { xcmPrtInterpreterEntry 17 }
xcmPrtInterpPrintQuality OBJECT-TYPE
SYNTAX XcmPrtPrintQuality
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Sets the default output quality of the printed document for this
interpreter. Some printers have programmatically controlled
output quality."
DEFVAL { normal }
::= { xcmPrtInterpreterEntry 18 }
xcmPrtInterpPrtInputIndexDflt OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Sets the default input source for the interpreter.
It is the index to the prtInputGroup.
The value zero means not specified."
DEFVAL { 0 } -- not specified
::= { xcmPrtInterpreterEntry 19 }
xcmPrtInterpPrtOutputIndexDflt OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The value of the index of the default Output bin for this
interpreter. If specified, this object overrides the box level
object prtOutputDefaultIndex.
The value zero means unspecified."
REFERENCE "See: Printer MIB prtOutputDefaultIndex"
DEFVAL { 0 } -- unspecified
::= { xcmPrtInterpreterEntry 20 }
xcmPrtInterpResFeedDirDefault OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object specifies for this interpreter, the default
resolution in the Feed direction in 10000 units of measure
specified by prtMarkerAddressabilityUnit for this interpreter.
A related object is the Printer MIB
prtInterpreterFeedAddressability object which describes the
maximum interpreter addressability in the feed direction.
The value zero shall mean not specified.
If this object has a value other than unspecified, this object
takes precedence over xcmPrtInterpFeedResIndexDefault."
REFERENCE "See: Printer MIB prtInterpreterFeedAddressability"
DEFVAL { 0 } -- unspecified
::= { xcmPrtInterpreterEntry 21 }
xcmPrtInterpResXFeedDirDefault OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object specifies for this interpreter, the default
resolution in the Cross Feed direction in 10000 units of measure
specified by prtMarkerAddressabilityUnit for this interpreter.
A related object is the Printer MIB
prtInterpreterFeedAddressability object which describes the
maximum interpreter addressability in the cross feed direction.
The value zero means unspecified.
If this object has a value other than unspecified, this object
takes precedence over xcmPrtInterpFeedResIndexDefault."
REFERENCE "See: Printer MIB prtInterpreterXFeedAddressability"
DEFVAL { 0 } -- unspecified
::= { xcmPrtInterpreterEntry 22 }
xcmPrtInterpResIPResIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object shall provide an index into the xcmIPResTable.
The xcmIPResTable shall be used to list available resolutions
supported by this interpreter. Each row includes objects
for Feed Resolution (pixels per inch), XFeed Resolution
(pixels per inch), Bits Per Pixel Supported, and Number of
Color Planes Supported.
The value zero means unspecified."
DEFVAL { 0 } -- unspecified
::= { xcmPrtInterpreterEntry 23 }
xcmPrtInterpResIPResIndexDflt OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object which is a pointer into the xcmIPResTable sets the
print resolution for this interpreter.
The value zero means unspecified."
DEFVAL { 0 } -- unspecified
::= { xcmPrtInterpreterEntry 24 }
xcmPrtInterpTextFormLength OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object sets the maximum number of lines per page for a text
file that is being printed using this interpreter.
For PCL Interpreters, this object provides the General PJL
Environment Variable FORMLINES. This variable is tied to both
the PJL Environment Variables PAPER and ORIENTATION. If the
value of either of those variables is changed, then the
FORMLINES variable automatically is updated to maintain the
same line spacing.
The value zero means not specified."
REFERENCE "
See: PJL Technical Reference Manual - FORMLINES"
DEFVAL { 0 } -- not specified
::= { xcmPrtInterpreterEntry 25 }
xcmPrtInterpTimeoutJob OBJECT-TYPE
SYNTAX Cardinal32
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object sets how long printer will wait for correct end of
job from the interpreter.
This setting lets you adjust how long the printer will wait to
receive the data it needs to complete a job before terminating
it prematurely.
The value zero means infinite."
DEFVAL { 0 } -- Infinite Timeout.
::= { xcmPrtInterpreterEntry 26 }
xcmPrtInterpTimeoutPage OBJECT-TYPE
SYNTAX Cardinal32
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object sets how long printer will wait for correct end of
page from the interpreter.
If, for example, a print job contains a page without the correct
end of page code, the job will stall. This setting lets you
adjust how long the printer will wait to receive the data it
needs to complete a page before terminating it prematurely.
The value zero means infinite."
DEFVAL { 0 } -- Infinite Timeout
::= { xcmPrtInterpreterEntry 27 }
xcmPrtInterpInputAliasIndexDflt OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Sets the default input tray alias for this interpreter.
It is the xcmPrtInputAliasIndex to the xcmPrtInputAlias table.
The value zero means 'not specified'."
REFERENCE " See: xcmPrtInputAliasTable"
DEFVAL { 0 } -- not specified
::= { xcmPrtInterpreterEntry 28 }
xcmPrtInterpTraySwitch OBJECT-TYPE
SYNTAX XcmPrtTraySwitch
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object declares for this interpreter the tray switching
declaration mechanism used.
Note: The tray switching declaration mechanisms do not specify
how or when or whether a printer switches back to using an
earlier emptied tray after that tray is refilled.
For example, assume a printer is set up to first use
Tray 1, then when emptied Tray 2, then Tray 3.
If just after tray 1 becomes empty and the printer switches
to Tray 2, the operator refills Tray 1; the printer may
select which tray to pull the next sheet from using a variety
of algorithms:
- The printer may switch back immediately to use tray 1.
This may be particularly appropriate if tray 1 is the
high capacity feeder.
- The printer may pull sheets from tray 2 until it is
empty and then switch back to tray 1.
- The printer may pull sheets from tray 2 until it is
empty and then continue to tray 3, before switching
back to tray 1.
Again, implementation of how the input tray switching
programs behave when empty trays are refilled is considered
printer specific."
REFERENCE "
See: xcmPrtInputNextPrtInputIndex
See: xcmPrtInputAliasGroup"
DEFVAL { notSpecified }
::= { xcmPrtInterpreterEntry 29 }
xcmPrtInterpMediumTypeDefault OBJECT-TYPE
SYNTAX XcmFixedLocaleDisplayString (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Specifies the paper type used to print a page if no paper
type is specified by the software application
Typical paper types could include Plain, Preprinted, etc."
DEFVAL { ''H } -- not specified
::= { xcmPrtInterpreterEntry 30 }
xcmPrtInterpMediaTypeErrPolicy OBJECT-TYPE
SYNTAX XcmPrtMediaTypeErrorPolicy
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Controls interpreter behavior when the requested Media Type
is not currently available."
REFERENCE "
See: xcmPrtInterpPageSizeErrorPolicy
See: xcmPrtInterpErrorPolicyTimeout"
DEFVAL { notSpecified }
::= { xcmPrtInterpreterEntry 31 }
xcmPrtInterpErrorPolicyTimeout OBJECT-TYPE
SYNTAX Cardinal32
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Provides the timeout for ErrorPolicy enumerations
requiring one, e.g. 'ignoreAfterTimeout'
The value zero shall mean infinite or not supported."
REFERENCE "
See: xcmPrtInterpPageSizeErrorPolicy
See: xcmPrtInterpMediaTypeErrPolicy"
DEFVAL { 0 }
::= { xcmPrtInterpreterEntry 32 }
xcmPrtInterpLineTerm OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Enables adding a Carriage Return after every Line Feed.
The value 'On' indicates that a Carriage Return will be
added after every Line Feed.
Usage example: This is a useful feature when printing text
jobs via PCL through a standard queue in UNIX.
The value 'other' shall mean not specified."
DEFVAL { other } -- not specified
::= { xcmPrtInterpreterEntry 33 }
xcmPrtInterpEnhancedResolution OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This value determines whether the value of
prtMarkerAddressabilityFeedDir and
prtMarkerAddressabilityXFeedDir is generated directly or
generated by enhancing a lower resolution
via interpolation techniques.
The value 'other' shall mean not specified."
DEFVAL { other } -- not specified
::= { xcmPrtInterpreterEntry 34 }
--
-- The Printer MIB Interpreter Group Extension for a specific product
-- (xcmPrtInterpProdSpecific01Group)
--
-- This group logically augments the Printer MIB's prtInterpreter group,
-- and is a continuation of the xcmPrtInterpGroup. These objects are
-- considered specific to one product, and have therefore been put into
-- one group.
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
xcmPrtInterpAutoContinue OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object controls whether the printer resumes printing after
a system error occurs.
When set to Off, the printer does not automatically resume.
Manual intervention must occur for the printer to resume.
When set to On, the printer automatically resumes operation
after certain system errors. The On setting is useful in a
networked environment.
The value 'other' shall mean not specified."
REFERENCE "
DocuPrint 4517 Network Laser Printers User Guide, Pg. D-3."
DEFVAL { other } -- not specified
::= { xcmPrtInterpreterEntry 50 }
xcmPrtInterpEnvFeederSize OBJECT-TYPE
SYNTAX XcmPrtMediumSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object informs the printer what size of envelope is
currently loaded in the envelope feeder. Because the input tray
feeding envelopes may not have a size sensor, this setting is
required so that the printer is able to know when the size of
envelope requested for printing is different than that loaded.
When the sizes do not match, and xcmPrtInterpPageSizeErrorPolicy
is set to Off, the printer displays a message asking for a
change of envelope size.
The XcmPrtPaperSize selected should be that of an envelope."
REFERENCE "
DocuPrint 4517 Network Laser Printers User Guide, Pg. D-16."
DEFVAL { notSpecified }
::= { xcmPrtInterpreterEntry 51 }
xcmPrtInterpManualFeedPgSize OBJECT-TYPE
SYNTAX XcmPrtMediumSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object sets the default medium size of the manual input
tray for this interpreter."
REFERENCE "
DocuPrint 4517 Network Laser Printers User Guide, Pg. D-10."
DEFVAL { notSpecified }
::= { xcmPrtInterpreterEntry 52 }
xcmPrtInterpOffsetStackingType OBJECT-TYPE
SYNTAX XcmPrtOutputOffsetStackingType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object further refines the type of offset stacking from
that specified by the object prtOutputOffsetStacking in the
Printer MIB.
Printers who need to specify OffsetStackingType by
interpreter shall set this object to 'other'.
To specify OffsetStackingType by interpreter, use the
object xcmPrtOutputOffsetStackingType."
REFERENCE "
See: prtOutputOffsetStacking.
See: xcmPrtOutputOffsetStackingType"
DEFVAL { notSpecified }
::= { xcmPrtInterpreterEntry 53 }
xcmPrtInterpProcessBarcodes OBJECT-TYPE
SYNTAX PresentOnOff
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Specifies whether the 'extra' barcode processing within
the interpreter should be used."
DEFVAL { other } -- not specified
::= { xcmPrtInterpreterEntry 54 }
-- The Printer MIB Extension Input Alias Group (xcmPrtInputAliasGroup)
--
-- This table maps alternate names to entries in the Input Group
-- and optionally enables an alternate tray switching sequence.
--
-- Implementation of every object in this group is conditionally
-- mandatory: mandatory for printers whose interpreters support
-- such alternate input naming capability through SNMP.
-- In other words, if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
xcmPrtInputAliasTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtInputAliasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This table defines one or more aliases for input sub-units
defined in the Input Group."
::= { xcmPrtInputAlias 1 }
xcmPrtInputAliasEntry OBJECT-TYPE
SYNTAX XcmPrtInputAliasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
One or more entries may exist corresponding to each entry
in the prtInputTable."
INDEX { hrDeviceIndex, prtInterpreterIndex, xcmPrtInputAliasIndex }
::= { xcmPrtInputAliasTable 1 }
XcmPrtInputAliasEntry ::= SEQUENCE {
xcmPrtInputAliasIndex Cardinal32,
xcmPrtInputAliasRowStatus RowStatus,
xcmPrtInputAliasName
XcmFixedLocaleDisplayString (SIZE(0..63)),
xcmPrtInputAliasSwitchProgram DisplayString (SIZE(0..255))
}
xcmPrtInputAliasIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used to identify this row in the
xcmPrtInputAliasTable."
::= { xcmPrtInputAliasEntry 1 }
xcmPrtInputAliasRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Manages the status of this conceptual row in the
xcmPrtInputAliasTable."
::= { xcmPrtInputAliasEntry 2 }
xcmPrtInputAliasName OBJECT-TYPE
SYNTAX XcmFixedLocaleDisplayString (SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Defines an alternate name for the input source. This is in
addition to the prtInputName from the Input Group. Typical
usage is to map an interpreter specific name to the sub-unit
name in the Input Group, e.g., PCL's 'upper' to the device
input name 'main'."
DEFVAL { ''H } -- unspecified
::= { xcmPrtInputAliasEntry 3 }
xcmPrtInputAliasSwitchProgram OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The input tray switching program for this 'InputAliasName'
presented in a '.' separated list of prtInputIndex values.
For example, the string '1.4.3' indicates start with the
input tray represented by prtInputIndex 1, if it becomes
empty switch to prtInputIndex 4, when it becomes empty
switch to prtInputIndex 3, if it becomes empty then wait
for operator intervention.
An empty string shall indicate unspecified."
DEFVAL { ''H } -- unspecified
::= { xcmPrtInputAliasEntry 4 }
--
-- The Printer MIB Extension PCL Interpreter group
-- (xcmPrtInterpPCLGroup)
--
-- This group provides for setting and reading the PCL-Specific
-- Variables in PJL. The one PCL-Specific PJL variable not found in
-- this particular group, 'SYMSET', is managed using the Printer MIB's
-- object prtInterpreterDefaultCharSetIn.
-- See: PCL 5 Printer Language Technical Reference Manual
-- See: PCL 5 Comparison Guide by Hewlett-Packard Corporation
-- See: PJL Technical Reference Manual - SYMSET
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
xcmPrtInterpPCLTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtInterpPCLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This table is an extension to the prtInterpPCLTable."
::= { xcmPrtInterpPCL 1 }
xcmPrtInterpPCLEntry OBJECT-TYPE
SYNTAX XcmPrtInterpPCLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry exists corresponding to each entry in the
xcmPrtInterpPCLTable."
INDEX { hrDeviceIndex, prtInterpreterIndex }
::= { xcmPrtInterpPCLTable 1 }
XcmPrtInterpPCLEntry ::= SEQUENCE {
-- xcmPrtInterpPCLGroup
xcmPrtInterpPCLRowStatus RowStatus,
xcmPrtInterpPCLFontSourceDflt XcmPrtPCLFontSource,
xcmPrtInterpPCLFontNumberDflt Cardinal32,
xcmPrtInterpPCLPitchNumerator Cardinal32,
xcmPrtInterpPCLPitchDenominator Cardinal32,
xcmPrtInterpPCLPtSizeNumerator Cardinal32,
xcmPrtInterpPCLPtSizeDenominatr Cardinal32,
-- xcmPrtInterpPCLProdSpecificGroup
xcmPrtInterpPCLPrintScreen XcmPrtPrintScreen
}
xcmPrtInterpPCLRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Manages the status of this conceptual row in the
xcmPrtInterpPCLTable."
::= { xcmPrtInterpPCLEntry 1 }
xcmPrtInterpPCLFontSourceDflt OBJECT-TYPE
SYNTAX XcmPrtPCLFontSource
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object provides the PCL-specific PJL variable 'FONTSOURCE'.
'FONTSOURCE' specifies the device location of the default font
in PCL."
REFERENCE "
See: PJL Technical Reference Manual- FONTSOURCE"
DEFVAL { notSpecified }
::= { xcmPrtInterpPCLEntry 2 }
xcmPrtInterpPCLFontNumberDflt OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object provides the PCL-specific PJL variable 'FONTNUMBER'.
In PCL, 'FONTNUMBER' specifies the ID of the default font within
the default FONTSOURCE."
REFERENCE "
See: PJL Technical Reference Manual - FONTNUMBER"
DEFVAL { 0 } -- unspecified
::= { xcmPrtInterpPCLEntry 3 }
xcmPrtInterpPCLPitchNumerator OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object along with xcmPrtInterpPCLPitchDenominator sets
the default for the PCL-specific PJL variable 'PITCH.
These two object sets the default pitch size for the PCL default
font defined in xcmPrtInterpreterPCLFontNumberDflt.
This variable only applies when the default font specified is
a scalable fixed pitch font.
A value of zero shall mean not specified."
REFERENCE "
See: PCL 5 Printer Language Technical Reference Manual
See: PJL Technical Reference Manual - PITCH
See: xcmPrtInterpPCLPitchDenominator"
DEFVAL { 0 } -- not specified
::= { xcmPrtInterpPCLEntry 4 }
xcmPrtInterpPCLPitchDenominator OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object along with xcmPrtInterpPCLPitchNumerator sets
the default for the PCL-specific PJL variable 'PITCH'.
These two object sets the default pitch size for the PCL default
font defined in xcmPrtInterpreterPCLFontNumberDflt.
The PITCH variable only applies when the default font specified
is a scalable fixed pitch font.
A value of zero shall mean not specified.
It is expected that a typical application will set
xcmPrtInterpPCLPitchDenominator to 100."
REFERENCE "
See: PCL 5 Printer Language Technical Reference Manual
See: PJL Technical Reference Manual - PITCH
See: xcmPrtInterpPCLPitchNumerator"
DEFVAL { 100 }
::= { xcmPrtInterpPCLEntry 5 }
xcmPrtInterpPCLPtSizeNumerator OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object along with xcmPrtInterpPCLPtSizeDenominatr sets the
default for the PCL-specific PJL variable 'PTSIZE'.
The PTSIZE variable only applies when the FONTNUMBER setting
specifies a scalable proportionally-spaced font.
The size is in units of printer's points, which units are here
considered to be exactly 1/72 of an inch.
The value zero shall mean not specified."
REFERENCE "
See: PJL Technical Reference Manual - PTSIZE
See: PCL 5 Printer Language Technical Reference Manual
See: xcmPrtInterpPCLPtSizeDenominatr"
DEFVAL { 0 } -- Not specified
::= { xcmPrtInterpPCLEntry 6 }
xcmPrtInterpPCLPtSizeDenominatr OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object along with xcmPrtInterpPCLPtSizeNumerator sets the
default for the PCL-specific PJL variable 'PTSIZE'.
The PTSIZE variable only applies when the FONTNUMBER setting
specifies a scalable proportionally-spaced font.
The value zero shall mean not specified.
It is expected that a typical application will set this object
to the value 4. For example, if the denominator is set to 4,
describe a PtSize of 8.5, xcmPrtInterpPCLPtSizeNominator must
be set to 34."
REFERENCE "
See: PCL 5 Printer Language Technical Reference Manual
See: PJL Technical Reference Manual - PTSIZE
See: xcmPrtInterpPCLPtSizeNumerator"
DEFVAL { 4 } -- Specifies Units of 0.25 Points
::= { xcmPrtInterpPCLEntry 7 }
-- The Printer MIB Interpreter PCL Group Ext. for product specific
-- implementations.
-- (xcmPrtInterpPCLProdSpecificGroup)
--
-- This group is a continuation of the xcmPrtInterpPCLGroup.
-- These objects are considered specific to one product.
--
-- Implementation of any object in this group is optional.
--
xcmPrtInterpPCLPrintScreen OBJECT-TYPE
SYNTAX XcmPrtPrintScreen
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object sets a special mode for 80 character screen dumps."
DEFVAL { off }
::= { xcmPrtInterpPCLEntry 50 }
-- The Printer MIB Extension Auxiliary Package Group
-- (xcmPrtAuxPackageGroup)
--
-- Implementation of every object in this group is conditionally
-- mandatory: if the SNMP agent implements the semantics of any of
-- these objects outside of the XCMI MIB, the agent shall also implement
-- this group in order to claim XCMI conformance.
--
xcmPrtAuxPackageTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtAuxPackageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This table lists Auxiliary Sheets enabled for this printer."
::= { xcmPrtAuxPackage 1 }
xcmPrtAuxPackageEntry OBJECT-TYPE
SYNTAX XcmPrtAuxPackageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry exists corresponding to each entry in the
xcmPrtAuxPackageTable."
INDEX { hrDeviceIndex, xcmPrtAuxPackageIndex }
::= { xcmPrtAuxPackageTable 1 }
XcmPrtAuxPackageEntry ::= SEQUENCE {
-- xcmPrtAuxPackageGroup
xcmPrtAuxPackageIndex Cardinal32,
xcmPrtAuxPackageRowStatus RowStatus,
xcmPrtAuxPackageType XcmPrtAuxSheetType,
xcmPrtAuxPackageContent XcmPrtAuxSheetContent,
xcmPrtAuxPackagePrtInputIndex Cardinal32,
xcmPrtAuxPackageNext Cardinal32
}
xcmPrtAuxPackageIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used by the printer to identify this
Auxiliary Sheet."
::= { xcmPrtAuxPackageEntry 1 }
xcmPrtAuxPackageRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Manages the status of this conceptual row in the
xcmPrtAuxPackageTable."
::= { xcmPrtAuxPackageEntry 2 }
xcmPrtAuxPackageType OBJECT-TYPE
SYNTAX XcmPrtAuxSheetType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Specifies the Auxiliary Sheet type associated with this row.
Note: DEFVAL commented out due to the negative enum
definition in 15prtxtc being illegal in strict SMIv1
(see section 3.2.1.1 of RFC 1155)."
-- DEFVAL { notSpecified }
::= { xcmPrtAuxPackageEntry 3 }
xcmPrtAuxPackageContent OBJECT-TYPE
SYNTAX XcmPrtAuxSheetContent
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Specifies the information content of this auxiliary sheet.
The value zero shall mean notSpecified."
DEFVAL { notSpecified }
::= { xcmPrtAuxPackageEntry 4 }
xcmPrtAuxPackagePrtInputIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Specifies the input tray the printer shall use in
printing this auxiliary sheet.
The value zero shall mean notSpecified."
DEFVAL { 0 } -- notSpecified
::= { xcmPrtAuxPackageEntry 5 }
xcmPrtAuxPackageNext OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Provides the index of the next Auxiliary Sheet
declared for this printer. This provides a linking
mechanism to group auxiliary pages. The last
auxiliary page to be declared will set this
xcmPrtAuxPackageNext object to zero, meaning no further
sheets.
The value zero shall mean notPresent."
DEFVAL { 0 } -- notPresent or no further auxiliary sheets
::= { xcmPrtAuxPackageEntry 6 }
--
-- Medium Type Supported Group (Conditionally Mandatory)'
-- (xcmPrtMediumTypeSupportedGroup)
--
-- Implementation of this group conditionally mandatory for all systems.
--
xcmPrtMedmTypeSupTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmPrtMedmTypeSupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table of specific and general medium 'types' which are
associated with this host system."
::= { xcmPrtMediumTypeSupported 2 }
xcmPrtMedmTypeSupEntry OBJECT-TYPE
SYNTAX XcmPrtMedmTypeSupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry for a specific or general medium 'types' which
is associated with this host system."
INDEX { hrDeviceIndex, xcmPrtMedmTypeSupIndex }
::= { xcmPrtMedmTypeSupTable 1 }
XcmPrtMedmTypeSupEntry ::= SEQUENCE {
xcmPrtMedmTypeSupIndex Ordinal32,
xcmPrtMedmTypeSupRowStatus RowStatus,
xcmPrtMedmTypeSupRowPersistence XcmGenRowPersistence,
xcmPrtMedmTypeSupName
XcmFixedLocaleDisplayString (SIZE(0..255)),
xcmPrtMedmTypeSupFuserTemp Integer32,
xcmPrtMedmTypeSupPaperType OCTET STRING(SIZE(0..255)),
xcmPrtMedmTypeSupPDLString OCTET STRING(SIZE(0..255)),
xcmPrtMedmTypeSupFuserHide TruthValue
}
xcmPrtMedmTypeSupIndex OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used to identify this medium type supported."
::= { xcmPrtMedmTypeSupEntry 1 }
xcmPrtMedmTypeSupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Manages the status of this conceptual row in the
'xcmPrtMedmTypeSupTable'."
::= { xcmPrtMedmTypeSupEntry 2 }
xcmPrtMedmTypeSupRowPersistence OBJECT-TYPE
SYNTAX XcmGenRowPersistence
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Indicates persistence of this row, from the given enumeration."
DEFVAL { unknown }
::= { xcmPrtMedmTypeSupEntry 3 }
xcmPrtMedmTypeSupName OBJECT-TYPE
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Named 'type' of this medium instance. This can be the name of
the media type provided by a user."
REFERENCE "
See: prtInputMediaType"
DEFVAL { ''H }
::= { xcmPrtMedmTypeSupEntry 4 }
xcmPrtMedmTypeSupFuserTemp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Indicates the relative fuser temperature for this medium type.
The range is 1 - 100. A value to '50' indciates the 'normal'
fuser temperature. Values higher than 50 indicate higher fuser
temperatures. Values lower than 50 indicate lower fuser
temperatures.
The value to use is device specific."
DEFVAL { 50 }
::= { xcmPrtMedmTypeSupEntry 5 }
xcmPrtMedmTypeSupPaperType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The paper type for this xcmPrtMedmTypeSupName."
REFERENCE "
See: prtInputMediaType"
DEFVAL { ''H }
::= { xcmPrtMedmTypeSupEntry 6 }
xcmPrtMedmTypeSupPDLString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The string used in the print stream for this
xcmPrtMedmTypeSupName."
REFERENCE "
See: prtInputMediaType"
DEFVAL { ''H }
::= { xcmPrtMedmTypeSupEntry 7 }
xcmPrtMedmTypeSupFuserHide OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
Indicates if the custom type has to be hidden in host drivers.
True means the media type is not displayed.
False means the media type can be selected for a print job"
DEFVAL { false }
::= { xcmPrtMedmTypeSupEntry 8 }
--
-- Conformance Information
--
xcmPrtMIBConformance OBJECT IDENTIFIER ::= { xcmPrintMIB 2 }
--
-- Compliance statements
--
xcmPrtMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "
The compliance statement for agents that implement the
printer MIB extension module."
MODULE -- this module
MANDATORY-GROUPS { xcmPrtBaseGroup }
--
-- Compliance Statements for the Conditionally Mandatory Groups.
--
GROUP xcmPrtGeneralGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtGeneralAuxSheetGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtGeneralProdSpecificGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtInputGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtOutputGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtOutputFinishingGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtChannelGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtChannelProdSpecificGroup
DESCRIPTION "
Implementation of this group is optional."
GROUP xcmPrtInterpreterGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtInterpProdSpecificGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtInputAliasGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtAuxPackageGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtMediumTypeSupportedGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtInterpPCLGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
GROUP xcmPrtInterpPCLProdSpecificGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory."
--
-- MIN Compliance statements for the xcmPrtBaseGroup
--
OBJECT xcmPrtBaseRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
--
-- MIN Compliance statements for the xcmPrtGeneralGroup
--
OBJECT xcmPrtGeneralRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmPrtGeneralAuxSheetPackage
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralManualFeedTimeout
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralInputAutoSwitch
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralOutputAutoSwitch
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralMediumClassDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralDarknessLevels
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralDarknessLevelNorm
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralDarknessLevelDflt
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralHexDumpEnable
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralTonerLowStop
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN Compliance statements for the xcmPrtGeneralAuxSheetGroup
--
OBJECT xcmPrtGeneralStartupPage
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralBannerPage
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralEndBannerPage
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralTrayLowWarning
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN Compliance statements for xcmPrtGeneralProdSpecificGroup
--
OBJECT xcmPrtGeneralScanlineCompaction
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtGeneralMonoPrintOptimization
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN Compliance statements for the xcmPrtInputGroup
--
OBJECT xcmPrtInputRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmPrtInputNextPrtInputIndex
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN Compliance statements for the xcmPrtOutputGroup
--
OBJECT xcmPrtOutputRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmPrtOutputNextIndex
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputPassword
SYNTAX OCTET STRING (SIZE(0..16))
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputOffsetStackingType
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputTrayTimeoutSupport
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputTrayTimeout
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN-ACCESS statements for the xcmPrtOutputFinishingGroup
--
OBJECT xcmPrtOutputStaple
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputStaplePosSupported
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputStapleDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputStaplePosDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputPunch
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputPunchDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputPunchPosSupported
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtOutputBookletFoldStaple
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN-ACCESS statements for the xcmPrtChannelGroup
--
OBJECT xcmPrtChannelRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmPrtChannelEOJTimeout
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtChannelAuxSheetPackage
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtChannelSpoolingEnable
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtChannelLangSensing
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtChannelBinaryPostScript
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN-ACCESS statements for the xcmPrtChannelProdSpecificGroup
--
OBJECT xcmPrtChannelAutoJobEnd
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtChannelBinaryPostScriptZ
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN-ACCESS statements for the xcmPrtInterpreterGroup
--
OBJECT xcmPrtInterpRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmPrtInterpAuxSheetPackage
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpContextSaving
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpEdgeEnhancement
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpFontIndexDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpGrayLevels
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpGrayLevelDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpJamRecovery
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpJobCopiesDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpLineWrap
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpMediumSizeDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPageProtect
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPageProtectSize
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPageSizeErrorPolicy
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPlexSupported
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPlexDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPrintEdgeToEdge
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPrintQuality
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPrtInputIndexDflt
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPrtOutputIndexDflt
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpResFeedDirDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpResXFeedDirDefault
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpResIPResIndex
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpResIPResIndexDflt
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpTextFormLength
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpTimeoutJob
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpTimeoutPage
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpInputAliasIndexDflt
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpTraySwitch
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpMediumTypeDefault
SYNTAX XcmFixedLocaleDisplayString (SIZE(0..16))
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpMediaTypeErrPolicy
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpErrorPolicyTimeout
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpLineTerm
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpEnhancedResolution
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN-ACCESS statements for the xcmPrtInterpProdSpecificGroup
--
OBJECT xcmPrtInterpAutoContinue
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpEnvFeederSize
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpManualFeedPgSize
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpOffsetStackingType
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpProcessBarcodes
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN-ACCESS statements for the xcmPrtInputAliasGroup
--
OBJECT xcmPrtInputAliasRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmPrtInputAliasName
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInputAliasSwitchProgram
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN-ACCESS statements for the xcmPrtInterpPCLGroup
--
OBJECT xcmPrtInterpPCLRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmPrtInterpPCLFontSourceDflt
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPCLFontNumberDflt
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPCLPitchNumerator
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPCLPitchDenominator
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPCLPtSizeNumerator
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtInterpPCLPtSizeDenominatr
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN-ACCESS statements for the xcmPrtInterpPCLProdSpecificGroup
--
OBJECT xcmPrtInterpPCLPrintScreen
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN-ACCESS statements for the xcmPrtAuxPackageGroup
--
OBJECT xcmPrtAuxPackageRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmPrtAuxPackageType
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtAuxPackageContent
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtAuxPackagePrtInputIndex
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtAuxPackageNext
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
--
-- MIN-ACCESS statements for the xcmPrtMediumTypeSupportedGroup
--
OBJECT xcmPrtMedmTypeSupRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmPrtMedmTypeSupRowPersistence
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtMedmTypeSupName
SYNTAX XcmFixedLocaleDisplayString (SIZE(0..16))
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object read-only
and with a reduced string length."
OBJECT xcmPrtMedmTypeSupFuserTemp
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtMedmTypeSupPaperType
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtMedmTypeSupPDLString
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
OBJECT xcmPrtMedmTypeSupFuserHide
MIN-ACCESS read-only
DESCRIPTION "It is conformant to implement this object read-only."
::= { xcmPrtMIBConformance 1 }
xcmPrtMIBGroups OBJECT IDENTIFIER ::= { xcmPrtMIBConformance 2 }
xcmPrtBaseGroup OBJECT-GROUP
OBJECTS { xcmPrtBaseRowStatus,
xcmPrtBaseGroupSupport,
xcmPrtBaseUpdateSupport,
xcmPrtBaseCreateSupport,
xcmPrtBaseIETFMIBGroupSupport,
xcmPrtBaseIETFMIBUpdateSupport,
xcmPrtBaseIETFMIBCreateSupport
}
STATUS current
DESCRIPTION "
The general printer group extension."
::= { xcmPrtMIBGroups 1 }
xcmPrtGeneralGroup OBJECT-GROUP
OBJECTS { xcmPrtGeneralRowStatus,
xcmPrtGeneralAuxSheetPackage,
xcmPrtGeneralManualFeedTimeout,
xcmPrtGeneralInputAutoSwitch,
xcmPrtGeneralOutputAutoSwitch,
xcmPrtGeneralMediumClassDefault,
xcmPrtGeneralDarknessLevels,
xcmPrtGeneralDarknessLevelNorm,
xcmPrtGeneralDarknessLevelDflt,
xcmPrtGeneralHexDumpEnable
}
STATUS current
DESCRIPTION "
The general printer group extension."
::= { xcmPrtMIBGroups 5 }
xcmPrtDriverOptionsGroup OBJECT-GROUP
OBJECTS { xcmPrtDrvrHwdOptStapler,
xcmPrtDrvrHwdOptDuplexUnit,
xcmPrtDrvrHwdOptPhaserBookletMaker,
xcmPrtDrvrHwdOptEnvelopeTray,
xcmPrtDrvrHwdOptCoilPunchUnit,
xcmPrtDrvrHwdOptFinisherDFA,
xcmPrtDrvrHwdOptHighCapacityFeeder,
xcmPrtDriverOutputDeliveryUnit,
xcmPrtDrvrHwdOptHardDrive,
xcmPrtDrvrHwdOptHolePunchUnit,
xcmPrtDriverInputPaperTrays,
xcmPrtDrvrHwdOptInserterUnit,
xcmPrtDrvrHwdOptJobAccountingFdi,
xcmPrtDrvrHwdOptFaxOut,
xcmPrtDrvrHwdOptMemoryInMBs,
xcmPrtDrvrHwdOptOutputBinSide,
xcmPrtDrvrHwdOptOutputBinCenter,
xcmPrtDrvrHwdOptPhaserModule,
xcmPrtDrvrHwdOptPrintEngine,
xcmPrtDrvrHwdOptSquareFoldTrimmer,
xcmPrtDrvrHwdOptTriFold,
xcmPrtDrvrFntCollation,
xcmPrtDrvrFntAsciiJobTicket,
xcmPrtDrvrFntAuthenticationMode,
xcmPrtDrvrFntHoldForAuthenMode,
xcmPrtDrvrFntEnhancedImageQualityMode,
xcmPrtDrvrFntProductivityPack,
xcmPrtDrvrFntJobStorage,
xcmPrtDrvrFntJobAccountingSystem
}
STATUS current
DESCRIPTION "
The printer driver options group extension."
::= { xcmPrtMIBGroups 6 }
xcmPrtInputGroup OBJECT-GROUP
OBJECTS { xcmPrtInputRowStatus,
xcmPrtInputNextPrtInputIndex,
xcmPrtInputUseCustomSize,
xcmPrtInputCustDimFeedDirDecl,
xcmPrtInputCustDimXFeedDirDecl,
xcmPrtInputTrayPriority
}
STATUS current
DESCRIPTION "
The input group extension."
::= { xcmPrtMIBGroups 8 }
xcmPrtOutputGroup OBJECT-GROUP
OBJECTS { xcmPrtOutputRowStatus,
xcmPrtOutputNextIndex,
xcmPrtOutputPassword,
xcmPrtOutputOffsetStackingType,
xcmPrtOutputTrayTimeoutSupport,
xcmPrtOutputTrayTimeout
}
STATUS current
DESCRIPTION "
The output group extension."
::= { xcmPrtMIBGroups 9 }
xcmPrtChannelGroup OBJECT-GROUP
OBJECTS { xcmPrtChannelRowStatus,
xcmPrtChannelEOJTimeout,
xcmPrtChannelAuxSheetPackage,
xcmPrtChannelSpoolingEnable,
xcmPrtChannelLangSensing,
xcmPrtChannelBinaryPostScript
}
STATUS current
DESCRIPTION "
The Channel group extension."
::= { xcmPrtMIBGroups 14 }
xcmPrtInterpreterGroup OBJECT-GROUP
OBJECTS { xcmPrtInterpRowStatus,
xcmPrtInterpAuxSheetPackage,
xcmPrtInterpContextSaving,
xcmPrtInterpEdgeEnhancement,
xcmPrtInterpFontIndexDefault,
xcmPrtInterpGrayLevels,
xcmPrtInterpGrayLevelDefault,
xcmPrtInterpJamRecovery,
xcmPrtInterpJobCopiesDefault,
xcmPrtInterpLineWrap,
xcmPrtInterpMediumSizeDefault,
xcmPrtInterpPageProtect,
xcmPrtInterpPageProtectSize,
xcmPrtInterpPageSizeErrorPolicy,
xcmPrtInterpPlexSupported,
xcmPrtInterpPlexDefault,
xcmPrtInterpPrintEdgeToEdge,
xcmPrtInterpPrintQuality,
xcmPrtInterpPrtInputIndexDflt,
xcmPrtInterpPrtOutputIndexDflt,
xcmPrtInterpResFeedDirDefault,
xcmPrtInterpResXFeedDirDefault,
xcmPrtInterpResIPResIndex,
xcmPrtInterpResIPResIndexDflt,
xcmPrtInterpTextFormLength,
xcmPrtInterpTimeoutJob,
xcmPrtInterpTimeoutPage,
xcmPrtInterpInputAliasIndexDflt,
xcmPrtInterpTraySwitch,
xcmPrtInterpMediumTypeDefault,
xcmPrtInterpMediaTypeErrPolicy,
xcmPrtInterpErrorPolicyTimeout,
xcmPrtInterpLineTerm,
xcmPrtInterpEnhancedResolution
}
STATUS current
DESCRIPTION "
The interpreter group extension."
::= { xcmPrtMIBGroups 15 }
xcmPrtInputAliasGroup OBJECT-GROUP
OBJECTS { xcmPrtInputAliasRowStatus,
xcmPrtInputAliasName,
xcmPrtInputAliasSwitchProgram
}
STATUS current
DESCRIPTION "
The Input Alias group."
::= { xcmPrtMIBGroups 50 }
xcmPrtOutputFinishingGroup OBJECT-GROUP
OBJECTS { xcmPrtOutputStaple,
xcmPrtOutputStaplePosSupported,
xcmPrtOutputStapleDefault,
xcmPrtOutputStaplePosDefault,
xcmPrtOutputPunch,
xcmPrtOutputPunchDefault,
xcmPrtOutputPunchPosSupported,
xcmPrtOutputBookletFoldStaple
}
STATUS current
DESCRIPTION "
The Output Finishing group."
::= { xcmPrtMIBGroups 51 }
xcmPrtGeneralAuxSheetGroup OBJECT-GROUP
OBJECTS { xcmPrtGeneralStartupPage,
xcmPrtGeneralBannerPage,
xcmPrtGeneralEndBannerPage,
xcmPrtGeneralTrayLowWarning
}
STATUS current
DESCRIPTION "
The General Auxiliary Sheet group."
::= { xcmPrtMIBGroups 52 }
xcmPrtGeneralProdSpecificGroup OBJECT-GROUP
OBJECTS { xcmPrtGeneralScanlineCompaction,
xcmPrtGeneralTonerLowStop,
xcmPrtGeneralMonoPrintOptimization
}
STATUS current
DESCRIPTION "
The general printer product specific group."
::= { xcmPrtMIBGroups 55 }
xcmPrtAuxPackageGroup OBJECT-GROUP
OBJECTS { xcmPrtAuxPackageRowStatus,
xcmPrtAuxPackageType,
xcmPrtAuxPackageContent,
xcmPrtAuxPackagePrtInputIndex,
xcmPrtAuxPackageNext
}
STATUS current
DESCRIPTION "
The Auxiliary Package group."
::= { xcmPrtMIBGroups 60 }
xcmPrtChannelProdSpecificGroup OBJECT-GROUP
OBJECTS { xcmPrtChannelAutoJobEnd,
xcmPrtChannelBinaryPostScriptZ
}
STATUS current
DESCRIPTION "
The Channel group extension for prod specific objects."
::= { xcmPrtMIBGroups 64 }
xcmPrtInterpProdSpecificGroup OBJECT-GROUP
OBJECTS { xcmPrtInterpAutoContinue,
xcmPrtInterpOffsetStackingType,
xcmPrtInterpEnvFeederSize,
xcmPrtInterpManualFeedPgSize,
xcmPrtInterpProcessBarcodes
}
STATUS current
DESCRIPTION "
The interpreter group extension."
::= { xcmPrtMIBGroups 65 }
xcmPrtInterpPCLGroup OBJECT-GROUP
OBJECTS { xcmPrtInterpPCLRowStatus,
xcmPrtInterpPCLFontSourceDflt,
xcmPrtInterpPCLFontNumberDflt,
xcmPrtInterpPCLPitchNumerator,
xcmPrtInterpPCLPitchDenominator,
xcmPrtInterpPCLPtSizeNumerator,
xcmPrtInterpPCLPtSizeDenominatr
}
STATUS current
DESCRIPTION "
The Interpreter PCL group."
::= { xcmPrtMIBGroups 70 }
xcmPrtInterpPCLProdSpecificGroup OBJECT-GROUP
OBJECTS { xcmPrtInterpPCLPrintScreen }
STATUS current
DESCRIPTION "
The Interpreter PCL Product Specific group."
::= { xcmPrtMIBGroups 71 }
xcmPrtMediumTypeSupportedGroup OBJECT-GROUP
OBJECTS { xcmPrtMedmTypeSupRowStatus,
xcmPrtMedmTypeSupRowPersistence,
xcmPrtMedmTypeSupName,
xcmPrtMedmTypeSupFuserTemp,
xcmPrtMedmTypeSupPaperType,
xcmPrtMedmTypeSupPDLString,
xcmPrtMedmTypeSupFuserHide
}
STATUS current
DESCRIPTION "
The Medium Type Supported group."
::= { xcmPrtMIBGroups 75 }
END
View Git Blame Copy Permalink