1097 lines
32 KiB
Plaintext
1097 lines
32 KiB
Plaintext
-- *****************************************************************
|
|
-- WESTERMO-SW6-NWM-MIB :
|
|
-- SNMP feature configuration of Westermo devices with SW6.
|
|
--
|
|
-- Copyright (c) 2018 by Westermo Teleindustri AB
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
-- *****************************************************************
|
|
-- This script has been tested using the SMI checker smilint
|
|
-- the tool can be downloaded at
|
|
-- http://www.ibr.cs.tu-bs.de/projects/libsmi/smilint.html
|
|
-- or use alternatively the online version at:
|
|
-- http://www.simpleweb.org/ietf/mibs/validate/
|
|
--
|
|
-- smilint -m -s -l 6 -i nameLength-32 ./WESTERMO-SW6-NWM-MIB
|
|
-- Ensure that all needed MIBS are located in the SMIPATH.
|
|
-- *****************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * NWM MIB
|
|
-- **********************************************************************
|
|
|
|
WESTERMO-SW6-NWM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
IpAddress, Integer32 FROM SNMPv2-SMI
|
|
DisplayString FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
;
|
|
|
|
-- **********************************************************************
|
|
-- * MODULE IDENTITY
|
|
-- **********************************************************************
|
|
nwm MODULE-IDENTITY
|
|
LAST-UPDATED "201909060000Z"
|
|
|
|
ORGANIZATION "Westermo Teleindustri AB"
|
|
CONTACT-INFO "E-mail: info@westermo.com"
|
|
DESCRIPTION "MIB Module for the Westermo RT-300 Radio Modem Device - NWM definitions"
|
|
|
|
REVISION "201909060000Z"
|
|
DESCRIPTION "Release 6.9.0-RC0"
|
|
|
|
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)
|
|
westermo(16177) products(1) rt(400) feature(2) 3 }
|
|
|
|
-- *********************************************************************
|
|
-- * Begin Major sections
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
|
|
-- Configuration
|
|
-- =============
|
|
|
|
configuration OBJECT IDENTIFIER ::= { nwm 1 }
|
|
cfgHttpReport OBJECT IDENTIFIER ::= { configuration 1 }
|
|
cfgChannelManager OBJECT IDENTIFIER ::= { configuration 3 }
|
|
cfgNwm OBJECT IDENTIFIER ::= { configuration 4 }
|
|
cfgIdf OBJECT IDENTIFIER ::= { configuration 5 }
|
|
cfgChannelCleaner OBJECT IDENTIFIER ::= { configuration 6 }
|
|
cfgAfm OBJECT IDENTIFIER ::= { configuration 7 }
|
|
cfgAfc OBJECT IDENTIFIER ::= { configuration 8 }
|
|
|
|
-- RPCs Remote Procedure Calls
|
|
-- ==========================
|
|
|
|
rpc OBJECT IDENTIFIER ::= { nwm 3 }
|
|
rpcChannelManager OBJECT IDENTIFIER ::= { rpc 1 }
|
|
rpcNwm OBJECT IDENTIFIER ::= { rpc 2 }
|
|
rpcNvram OBJECT IDENTIFIER ::= { rpc 3 }
|
|
|
|
-- Conformance Information
|
|
-- =======================
|
|
|
|
conformance OBJECT IDENTIFIER ::= { nwm 10000 }
|
|
groups OBJECT IDENTIFIER ::= { conformance 1 }
|
|
groupConfiguration OBJECT IDENTIFIER ::= { groups 1 }
|
|
groupRpc OBJECT IDENTIFIER ::= { groups 2 }
|
|
|
|
compliances OBJECT IDENTIFIER ::= { conformance 2 }
|
|
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
-- * End Major Sections
|
|
-- *********************************************************************
|
|
|
|
|
|
|
|
-- *********************************************************************
|
|
-- * Begin Object Types
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
|
|
-- HttpReport
|
|
|
|
cfgHttpRprtServerUrl OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"URL of the remote server where DFS / IDF reports are sent to.
|
|
|
|
**Format:** `http://<ipv4>:<port>/<path>`
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgHttpReport 1 }
|
|
|
|
-- ChannelManager
|
|
|
|
cfgChMgrEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the ChannelManager.
|
|
"
|
|
::= { cfgChannelManager 1 }
|
|
|
|
cfgChMgrUsableFrequencyList OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..23)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure which frequency list is to be used as 'list of usable
|
|
frequencies' by the ChannelManager. A value of -1 means no list
|
|
defined using all frequencies available in current country.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgChannelManager 2 }
|
|
|
|
cfgChMgrDfsUseNvram OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'enabled' the DFS states will be load / stored from / to the
|
|
non-volatile ram device.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgChannelManager 3 }
|
|
|
|
-- NWM
|
|
|
|
cfgNwmEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the Wireless Manager.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgNwm 1 }
|
|
|
|
-- IDF
|
|
|
|
cfgIdfEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable Interference Detection Function.
|
|
|
|
IDF is only supported for devices with two radios.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdf 1 }
|
|
|
|
cfgIdfInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Report interval in seconds.
|
|
|
|
This value defines the interval when all available Reports are sent
|
|
to the URL defined in cfgIdfHttpReportUrl.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdf 3 }
|
|
|
|
cfgIdfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IDF Name.
|
|
|
|
Can be used to set an unique identifier for the reports.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdf 4 }
|
|
|
|
-- IDF.Trigger
|
|
|
|
cfgIdfTrigger OBJECT IDENTIFIER ::= { cfgIdf 5 }
|
|
|
|
cfgIdfTrigRadarCntTh OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IDF trigger radar_count.
|
|
|
|
Defines the number of radar events to trigger a report.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdfTrigger 1 }
|
|
|
|
cfgIdfTrigChanLoadTh OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IDF trigger channel_load.
|
|
|
|
Defines the channel load ratio in percent to trigger a report.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdfTrigger 2 }
|
|
|
|
cfgIdfTrigAlienLoadTh OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IDF trigger alien_load.
|
|
|
|
Defines the ratio of alien channel load in percent to trigger a
|
|
report.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdfTrigger 3 }
|
|
|
|
cfgIdfTrigDomLoadTh OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IDF trigger domestic_load.
|
|
|
|
Defines the ratio of domestic channel load in percent to trigger
|
|
a report.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdfTrigger 4 }
|
|
|
|
cfgIdfTrigAlienMaxRssiTh OBJECT-TYPE
|
|
SYNTAX Integer32 (0..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IDF trigger alien_avg_rssi.
|
|
|
|
Defines the average RSSI of alien traffic to trigger a report.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdfTrigger 5 }
|
|
|
|
cfgIdfTrigDomMaxRssiTh OBJECT-TYPE
|
|
SYNTAX Integer32 (0..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IDF trigger domestic_avg_rssi.
|
|
|
|
Defines the average RSSI of domestic traffic to trigger a report.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdfTrigger 6 }
|
|
|
|
-- IDF.ScanWork
|
|
|
|
cfgIdfScanWorkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CfgIdfScanWorkTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of scan works items.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdf 10 }
|
|
|
|
cfgIdfScanWorkTableEntry OBJECT-TYPE
|
|
SYNTAX CfgIdfScanWorkTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scan work list.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
INDEX {cfgIdfScanWorkIndex}
|
|
::= { cfgIdfScanWorkTable 1 }
|
|
|
|
CfgIdfScanWorkTableSeq ::=
|
|
SEQUENCE { cfgIdfScanWorkIndex Integer32,
|
|
cfgIdfScanWorkFreq Integer32,
|
|
cfgIdfScanWorkAction INTEGER,
|
|
cfgIdfScanWorkSeconds Integer32
|
|
}
|
|
|
|
cfgIdfScanWorkIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..31)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry index of Table.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdfScanWorkTableEntry 1 }
|
|
|
|
cfgIdfScanWorkFreq OBJECT-TYPE
|
|
SYNTAX Integer32 (0..6100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Center frequency in MHz of the channel to scan.
|
|
|
|
Set center frequency to 0 to disable this scan work item and all
|
|
following items.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdfScanWorkTableEntry 2 }
|
|
|
|
cfgIdfScanWorkAction OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), spectral(2), radar(3), wifi(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scan Work Action of the interference function.
|
|
|
|
The following scan work actions are available:
|
|
|
|
**none(0)**
|
|
|
|
Scan work item and all following items of the table are ignored.
|
|
|
|
**spectral(2)**
|
|
|
|
Spectral data are collected from Antenna port 3 and spectral
|
|
statistics is generated at the end of the scan work item. During a
|
|
Spectral Scan Work the raw spectral data can be retrieved from the
|
|
AP. Please refer to the Software User Manual for more information.
|
|
|
|
**radar(3)**
|
|
|
|
Runs the radar detection engine and counts all radar sequences
|
|
detected by the monitor wireless device on Antenna port 3.
|
|
|
|
**wifi(4)**
|
|
|
|
Wifi data are collected from Antenna port 3 and wifi statistics is
|
|
generated at the end of the scan work item.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdfScanWorkTableEntry 3 }
|
|
|
|
cfgIdfScanWorkSeconds OBJECT-TYPE
|
|
SYNTAX Integer32 (0..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Duration of the Scan Work Item in seconds.
|
|
|
|
At the end of the Scan Work a JSON formatted Report is generated
|
|
and buffered. Set scan work time to 0 to disable this scan work
|
|
item and all following items.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgIdfScanWorkTableEntry 4 }
|
|
|
|
-- ChannelCleaner
|
|
|
|
cfgChanCleanEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable ChannelCleaner
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgChannelCleaner 1 }
|
|
|
|
cfgChanCleanDfsUseNvram OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'enabled' the DFS states will be load/stored from/to the
|
|
non-volatile ram device.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgChannelCleaner 9 }
|
|
|
|
cfgChanCleanUsableFrequencyList OBJECT-TYPE
|
|
SYNTAX Integer32 (0..23)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure which frequency list cfgWlanFIndex is to be used as
|
|
'list of usable frequencies' by ChannelCleaner.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgChannelCleaner 10 }
|
|
|
|
-- AFM
|
|
|
|
cfgAfmEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the Area Frequency Manager on the local device.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfm 1 }
|
|
|
|
cfgAfmName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Area Frequency Manager on the local device.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfm 2 }
|
|
|
|
cfgAfmIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the Area which the local running Area Frequency Manager
|
|
manages.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfm 3 }
|
|
|
|
cfgAfmAreaSize OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of segments controlled by this AFM.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfm 5 }
|
|
|
|
cfgAfmPrimary OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable to set this AFM as primary in this area; set disable for
|
|
stand-by.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfm 6 }
|
|
|
|
cfgAfmReportEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled(1) the AFM sends reports to the configured server URL
|
|
(see cfgIdfServerUrl).
|
|
|
|
Please refer to Software 6 Interface Description for more
|
|
information.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfm 7 }
|
|
|
|
cfgAfmRedundant OBJECT IDENTIFIER ::= { cfgAfm 10 }
|
|
|
|
cfgAfmRedundantIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the redundant Area Frequency Manager.
|
|
|
|
Set to '0.0.0.0' to disable.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfmRedundant 1 }
|
|
|
|
cfgAfmRedundantName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the redundant Area Frequency Manager.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfmRedundant 2 }
|
|
|
|
|
|
cfgAfmNeighbourTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CfgAfmNeighbourTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the two neighbour (adjacent) Area Frequency Manager.
|
|
|
|
Currently only up to two neighbour AFMs are supported.
|
|
|
|
The area index of the neighbour AFM must be less or greater than
|
|
the index of this area.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfm 20 }
|
|
|
|
cfgAfmNeighbourTableEntry OBJECT-TYPE
|
|
SYNTAX CfgAfmNeighbourTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Neighbour AFM list.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
INDEX {cfgAfmNeighbourTableIndex}
|
|
::= { cfgAfmNeighbourTable 1 }
|
|
|
|
CfgAfmNeighbourTableSeq ::=
|
|
SEQUENCE { cfgAfmNeighbourTableIndex Integer32,
|
|
cfgAfmNeighbourIp IpAddress,
|
|
cfgAfmNeighbourName DisplayString
|
|
}
|
|
|
|
cfgAfmNeighbourTableIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry index of Table.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfmNeighbourTableEntry 1 }
|
|
|
|
cfgAfmNeighbourIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the neighbour (adjacent) Area Frequency Manager.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfmNeighbourTableEntry 2 }
|
|
|
|
cfgAfmNeighbourName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the neighbour (adjacent) Area Frequency Manager.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfmNeighbourTableEntry 3 }
|
|
|
|
cfgAfmAfcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CfgAfmAfcTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of all Area Frequency Clients controlled by the Area
|
|
Frequency Manager running on this device.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfm 30 }
|
|
|
|
cfgAfmAfcTableEntry OBJECT-TYPE
|
|
SYNTAX CfgAfmAfcTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AFC list.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
INDEX {cfgAfmAfcTableIndex}
|
|
::= { cfgAfmAfcTable 1 }
|
|
|
|
CfgAfmAfcTableSeq ::=
|
|
SEQUENCE { cfgAfmAfcTableIndex Integer32,
|
|
cfgAfmAfcName DisplayString,
|
|
cfgAfmAfcIp IpAddress
|
|
}
|
|
|
|
cfgAfmAfcTableIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry index of Table.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfmAfcTableEntry 1 }
|
|
|
|
cfgAfmAfcName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Area Frequency Client to control.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfmAfcTableEntry 2 }
|
|
|
|
cfgAfmAfcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the Area Frequency Client to control.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfmAfcTableEntry 3 }
|
|
|
|
-- AFC
|
|
|
|
cfgAfcEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the Area Frequency Client on the local device.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfc 1 }
|
|
|
|
cfgAfcName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the Area Frequency Client on the local device.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfc 2 }
|
|
|
|
cfgAfcIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..31)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the Area Frequency Client within the local Area.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfc 3 }
|
|
|
|
cfgAfcBackupFreq OBJECT-TYPE
|
|
SYNTAX Integer32 (0..6100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Backup frequency which the Area Frequency Client will use if the
|
|
Area Frequency Manager is not present.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfc 5 }
|
|
|
|
cfgAfcReportEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled(1) the AFC sends reports to the configured server URL
|
|
(see cfgIdfServerUrl).
|
|
|
|
Please refer to Software 6 Interface Description for more
|
|
information.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfc 6 }
|
|
|
|
cfgAfcAfmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CfgAfcAfmTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Area Frequency Managers which are allowed to control
|
|
this Area Frequency Client (AFC).
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfc 10 }
|
|
|
|
cfgAfcAfmTableEntry OBJECT-TYPE
|
|
SYNTAX CfgAfcAfmTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AFC list.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
INDEX {cfgAfcAfmTableIndex}
|
|
::= { cfgAfcAfmTable 1 }
|
|
|
|
CfgAfcAfmTableSeq ::=
|
|
SEQUENCE { cfgAfcAfmTableIndex Integer32,
|
|
cfgAfcAfmName DisplayString,
|
|
cfgAfcAfmIp IpAddress
|
|
}
|
|
|
|
cfgAfcAfmTableIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry index of Table.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfcAfmTableEntry 1 }
|
|
|
|
cfgAfcAfmName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the connecting Area Frequency Manager.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfcAfmTableEntry 2 }
|
|
|
|
cfgAfcAfmIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the connecting Area Frequency Manager.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfcAfmTableEntry 3 }
|
|
|
|
cfgAfcNeighbourOffsetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CfgAfcNeighbourOffsetTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of up to 24 segment offsets relevant for neighbour list.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfc 40 }
|
|
|
|
cfgAfcNeighbourOffsetTableEntry OBJECT-TYPE
|
|
SYNTAX CfgAfcNeighbourOffsetTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Neighbour segment offset list"
|
|
INDEX {cfgAfcNeighbourOffsetTableIndex}
|
|
::= { cfgAfcNeighbourOffsetTable 1 }
|
|
|
|
CfgAfcNeighbourOffsetTableSeq ::=
|
|
SEQUENCE { cfgAfcNeighbourOffsetTableIndex Integer32,
|
|
cfgAfcNeighbourOffset Integer32
|
|
}
|
|
|
|
cfgAfcNeighbourOffsetTableIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..23)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry index of Table.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfcNeighbourOffsetTableEntry 1 }
|
|
|
|
cfgAfcNeighbourOffset OBJECT-TYPE
|
|
SYNTAX Integer32 (-15..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Segment offset to be considered for neighbour list.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { cfgAfcNeighbourOffsetTableEntry 2 }
|
|
|
|
-- =============================================================================
|
|
|
|
-- Channel Manager
|
|
|
|
rpcChMgrHttpReport OBJECT-TYPE
|
|
SYNTAX INTEGER { nop(0), freqstate(1), channels(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Requests a HTTP report from the Channel Manager.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { rpcChannelManager 1 }
|
|
|
|
-- Nwm
|
|
|
|
rpcNwmHttpReport OBJECT-TYPE
|
|
SYNTAX INTEGER { nop(0), status(1), freqstate(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Requests a HTTP report from the Wireless Manager.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { rpcNwm 1 }
|
|
|
|
-- Nvram Manager
|
|
|
|
rpcNvramFreqStatesReset OBJECT-TYPE
|
|
SYNTAX INTEGER { reset(0) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Resets the state of DFS frequencies in the Available Channel List
|
|
which is stored in non-volatile memory.
|
|
|
|
The device performs a reboot after resetting the state of the
|
|
frequencies. The behaviour is similar to a factory reset but does
|
|
only reset the Available Channel List.
|
|
|
|
Applies to AP. 802.11n products only.
|
|
"
|
|
::= { rpcNvram 1 }
|
|
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
-- * End of Object Types
|
|
-- *********************************************************************
|
|
|
|
-- *********************************************************************
|
|
-- * Begin GROUPS
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
|
|
groupCfgHttpReport OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgHttpRprtServerUrl
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"HttpReport properties"
|
|
::= { groupConfiguration 1 }
|
|
|
|
groupCfgIdf OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgIdfEnabled,
|
|
cfgIdfInterval,
|
|
cfgIdfName,
|
|
cfgIdfTrigRadarCntTh,
|
|
cfgIdfTrigChanLoadTh,
|
|
cfgIdfTrigAlienLoadTh,
|
|
cfgIdfTrigDomLoadTh,
|
|
cfgIdfTrigAlienMaxRssiTh,
|
|
cfgIdfTrigDomMaxRssiTh,
|
|
cfgIdfScanWorkFreq,
|
|
cfgIdfScanWorkAction,
|
|
cfgIdfScanWorkSeconds
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IDF configuration."
|
|
::= { groupConfiguration 2 }
|
|
|
|
groupCfgChannelManager OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgChMgrEnabled,
|
|
cfgChMgrUsableFrequencyList,
|
|
cfgChMgrDfsUseNvram
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ChannelManager properties"
|
|
::= { groupConfiguration 4 }
|
|
|
|
groupCfgNwm OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgNwmEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NWM properties"
|
|
::= { groupConfiguration 5 }
|
|
|
|
groupCfgChannelCleaner OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgChanCleanEnabled,
|
|
cfgChanCleanDfsUseNvram,
|
|
cfgChanCleanUsableFrequencyList
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ChannelCleaner properties"
|
|
::= { groupConfiguration 6 }
|
|
|
|
groupCfgAfm OBJECT IDENTIFIER ::= { groupConfiguration 7 }
|
|
|
|
groupCfgAfmGlobal OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgAfmEnabled,
|
|
cfgAfmName,
|
|
cfgAfmIndex,
|
|
cfgAfmAreaSize,
|
|
cfgAfmPrimary,
|
|
cfgAfmReportEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Afm general maintree properties"
|
|
::= { groupCfgAfm 1 }
|
|
|
|
groupCfgAfmRedundant OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgAfmRedundantIp,
|
|
cfgAfmRedundantName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Afm Redundant properties"
|
|
::= { groupCfgAfm 2 }
|
|
|
|
groupCfgAfmNeighbourTable OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgAfmNeighbourIp,
|
|
cfgAfmNeighbourName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Afm Neighbour properties"
|
|
::= { groupCfgAfm 3 }
|
|
|
|
groupCfgAfmAfcTable OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgAfmAfcIp,
|
|
cfgAfmAfcName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Afm Afc properties"
|
|
::= { groupCfgAfm 4 }
|
|
|
|
groupCfgAfc OBJECT IDENTIFIER ::= { groupConfiguration 8 }
|
|
|
|
groupCfgAfcGlobal OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgAfcEnabled,
|
|
cfgAfcName,
|
|
cfgAfcIndex,
|
|
cfgAfcBackupFreq,
|
|
cfgAfcReportEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Afc general maintree properties"
|
|
::= { groupCfgAfc 1 }
|
|
|
|
groupCfgAfcAfmTable OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgAfcAfmIp,
|
|
cfgAfcAfmName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Afc Afm properties"
|
|
::= { groupCfgAfc 2 }
|
|
|
|
groupCfgAfcNeighbourOffsetTable OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgAfcNeighbourOffset
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Afc neighbour segment offset properties"
|
|
::= { groupCfgAfc 4 }
|
|
|
|
-- =============================================================================
|
|
|
|
groupRpcChannelManager OBJECT-GROUP
|
|
OBJECTS {
|
|
rpcChMgrHttpReport
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RPCs for Channel Manager"
|
|
::= { groupRpc 1 }
|
|
|
|
groupRpcNwm OBJECT-GROUP
|
|
OBJECTS {
|
|
rpcNwmHttpReport
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RPCs for NWM"
|
|
::= { groupRpc 2 }
|
|
|
|
groupRpcNvram OBJECT-GROUP
|
|
OBJECTS {
|
|
rpcNvramFreqStatesReset
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RPCs for Nvram Manager"
|
|
::= { groupRpc 3 }
|
|
|
|
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
-- * End GROUPS
|
|
-- *********************************************************************
|
|
|
|
-- *********************************************************************
|
|
-- * Begin COMPLIANCE STATEMENTS
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
|
|
compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Implementation Requirements for DT50 bindings"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
groupCfgHttpReport,
|
|
groupCfgChannelManager,
|
|
groupCfgNwm,
|
|
groupCfgIdf,
|
|
groupRpcChannelManager,
|
|
groupRpcNwm,
|
|
groupRpcNvram,
|
|
groupCfgChannelCleaner,
|
|
groupCfgAfmGlobal,
|
|
groupCfgAfmRedundant,
|
|
groupCfgAfmNeighbourTable,
|
|
groupCfgAfmAfcTable,
|
|
groupCfgAfcGlobal,
|
|
groupCfgAfcAfmTable,
|
|
groupCfgAfcNeighbourOffsetTable
|
|
}
|
|
::= { compliances 1 }
|
|
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
-- * End COMPLIANCE STATEMENTS
|
|
-- *********************************************************************
|
|
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
-- * End of MIB DEFINITION
|
|
-- *********************************************************************
|
|
END
|
|
|
|
|
|
-- *********************************************************************
|
|
-- *********************************************************************
|