741 lines
28 KiB
Plaintext
741 lines
28 KiB
Plaintext
-- Private MIB definition for Trango Systems
|
|
-- Access 58xx series wireless broadband Remote Unit P5830S
|
|
-- Version: 1.0
|
|
-- Date: June 10, 2003
|
|
--
|
|
-- Copyright 2003: Trango Systems, Inc. All Rights Reserved.
|
|
-- Trango Systems, Inc. 15070 Avenue Of Science Suite 200 San Diego CA 92128 USA.
|
|
--
|
|
-- Reproduction of this document is authorized on condition that the
|
|
-- foregoing copyright notice is included.
|
|
|
|
TRANGOP5830S-RU-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- MIB module for enterprise trango wireless broadband
|
|
-- of management of P5830S remote unit
|
|
|
|
IMPORTS
|
|
enterprises, IpAddress, Counter
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
-- textual conventions
|
|
|
|
DisplayString ::=
|
|
OCTET STRING
|
|
-- This data type is used to model textual information taken
|
|
-- from the NVT ASCII character set. By convention, objects
|
|
-- with this syntax are declared as having
|
|
--
|
|
-- SIZE (0..255)
|
|
|
|
|
|
-- trango wireless broadband MIB registration id assigned to 5454.
|
|
-- customer needs to change this value based on their OEM value.
|
|
trango OBJECT IDENTIFIER ::= { enterprises 5454 }
|
|
tbw OBJECT IDENTIFIER ::= { trango 1 }
|
|
p5830sru OBJECT IDENTIFIER ::= { tbw 24 }
|
|
|
|
-- modules branched from m5830sap
|
|
rusys OBJECT IDENTIFIER ::= { p5830sru 1 }
|
|
rurf OBJECT IDENTIFIER ::= { p5830sru 2 }
|
|
mibinfo OBJECT IDENTIFIER ::= { p5830sru 5 }
|
|
|
|
ruversion OBJECT IDENTIFIER ::= { rusys 1 }
|
|
ruswitches OBJECT IDENTIFIER ::= { rusys 8 }
|
|
rutraffic OBJECT IDENTIFIER ::= { rusys 9 }
|
|
ruipconfig OBJECT IDENTIFIER ::= { rusys 13 }
|
|
rurftable OBJECT IDENTIFIER ::= { rurf 4 }
|
|
ruism OBJECT IDENTIFIER ::= { rurf 5 }
|
|
ruunii OBJECT IDENTIFIER ::= { rurf 6 }
|
|
|
|
-- MIB objects defined below
|
|
|
|
-- remote unit system objects
|
|
ruversionHW OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(2))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hardware version."
|
|
::= { ruversion 1 }
|
|
|
|
ruversionFW OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Main firmware version.
|
|
Format: <code version>H<hardware version>D<date>."
|
|
::= { ruversion 2 }
|
|
|
|
ruversionFPGA OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"FPGA firmware version."
|
|
::= { ruversion 3 }
|
|
|
|
ruversionFWChecksum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote unit firmware checksum."
|
|
::= { ruversion 4 }
|
|
|
|
ruversionFPGAChecksum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote unit FPGA checksum."
|
|
::= { ruversion 5 }
|
|
|
|
rusysDeviceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote unit device Id. Each remote unit in a cluster shall have unique ID."
|
|
::= { rusys 2 }
|
|
|
|
rusysDefOpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(16),
|
|
off(0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The operation mode (on or off) the remote unit is on after reboot/power cycle."
|
|
::= { rusys 3 }
|
|
|
|
rusysCurOpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(16),
|
|
off(0)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote unit's current operation mode."
|
|
::= { rusys 4 }
|
|
|
|
rusysActivateOpmode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deactivated(0),
|
|
activated(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Engage remote unit to on operation mode."
|
|
DEFVAL { deactivated }
|
|
::= { rusys 5 }
|
|
|
|
rusysReadCommStr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SNMP agent read community string. It is used for authenticcation purpose."
|
|
::= { rusys 6 }
|
|
|
|
rusysWriteCommStr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SNMP agent write community string. It is used for authentication purpose."
|
|
::= { rusys 7 }
|
|
|
|
ruswitchesBlockBroadcastMulticast OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
passed(0),
|
|
blocked(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This switch enables or disables the blocking of Ethernet
|
|
control packet except ICMP and ARP to reduce the amount
|
|
of uneccessary overhead introduced to the wireless link."
|
|
::= { ruswitches 1 }
|
|
|
|
|
|
ruswitchesHTTPD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When it is turned on, then the remote unit is accessible for
|
|
configuring via web browser (e.g. IE or Nescape)."
|
|
::= { ruswitches 5 }
|
|
|
|
ruswitchesAutoScanMasterSignal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This switch enables or disables the auto scan master unit
|
|
signal operation on the remote unit only."
|
|
::= { ruswitches 6 }
|
|
|
|
rutrafficEthInOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of octets of remote unit's payload received on Ethernet port."
|
|
::= { rutraffic 1 }
|
|
|
|
rutrafficEthOutOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of octets of remote unit's payload transmitted on Ethernet port."
|
|
::= { rutraffic 2 }
|
|
|
|
rutrafficRfInOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of octets of remote unit's payload received from RF port."
|
|
::= { rutraffic 3 }
|
|
|
|
rutrafficRfOutOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of octets of remote unit's payload transmitted to RF port."
|
|
::= { rutraffic 4 }
|
|
|
|
rusysTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current remote unit temperature value (in Celsius)."
|
|
::= { rusys 10 }
|
|
|
|
rusysUpdateFlashAndActivate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Save system setting values to Flash and activate the settings."
|
|
DEFVAL {no}
|
|
::= { rusys 11 }
|
|
|
|
rusysReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deactivated(0),
|
|
activated(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reboot the remote unit."
|
|
DEFVAL { deactivated }
|
|
::= { rusys 12 }
|
|
|
|
ruipconfigIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"New IP address. It will be saved to
|
|
non-volatile memory and activated in 5 secs."
|
|
::= { ruipconfig 1 }
|
|
|
|
ruipconfigSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"New Subnet mask. It will be saved to
|
|
non-volatile memory and activated in 5 secs."
|
|
::= { ruipconfig 2 }
|
|
|
|
ruipconfigDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"New Default gateway. It will be saved to
|
|
non-volatile memory and activated in 5 secs."
|
|
::= { ruipconfig 3 }
|
|
|
|
-- remote rf objects
|
|
rurfRSSI OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote unit RSSI (in dBm)."
|
|
::= { rurf 1 }
|
|
|
|
rurftableChannel1 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 1 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 1 }
|
|
|
|
rurftableChannel2 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 2 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 2 }
|
|
|
|
rurftableChannel3 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 3 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 3 }
|
|
|
|
rurftableChannel4 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 4 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 4 }
|
|
|
|
rurftableChannel5 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 5 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 5 }
|
|
|
|
rurftableChannel6 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 6 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 6 }
|
|
|
|
rurftableChannel7 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 7 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 7 }
|
|
|
|
rurftableChannel8 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 8 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 8 }
|
|
|
|
rurftableChannel9 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 9 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 9 }
|
|
|
|
rurftableChannel10 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 10 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 10 }
|
|
|
|
rurftableChannel11 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 11 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 11 }
|
|
|
|
rurftableChannel12 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 12 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 12 }
|
|
|
|
rurftableChannel13 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 13 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 13 }
|
|
|
|
rurftableChannel14 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 14 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 14 }
|
|
|
|
rurftableChannel15 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 15 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 15 }
|
|
|
|
rurftableChannel16 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 16 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 16 }
|
|
|
|
rurftableChannel17 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 17 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 17 }
|
|
|
|
rurftableChannel18 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 18 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 18 }
|
|
|
|
rurftableChannel19 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 19 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 19 }
|
|
|
|
rurftableChannel20 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 20 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 20 }
|
|
|
|
rurftableChannel21 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 21 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 21 }
|
|
|
|
rurftableChannel22 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 22 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 22 }
|
|
|
|
rurftableChannel23 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 23 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 23 }
|
|
|
|
rurftableChannel24 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 24 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 24 }
|
|
|
|
rurftableChannel25 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 25 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 25 }
|
|
|
|
rurftableChannel26 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 26 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 26 }
|
|
|
|
rurftableChannel27 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 27 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 27 }
|
|
|
|
rurftableChannel28 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 28 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 28 }
|
|
|
|
rurftableChannel29 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 29 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 29 }
|
|
|
|
rurftableChannel30 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 30 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the remote unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { rurftable 30 }
|
|
|
|
ruismTxPowerMax OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum ISM Tx power value can be set (in dBm)."
|
|
::= { ruism 1 }
|
|
|
|
ruismTxPowerMin OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The minimum ISM Tx power value can be set (in dBm)."
|
|
::= { ruism 2 }
|
|
|
|
ruismTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ISM RF tx power (in dBm). It specifies the power output
|
|
of the radio, excluding the antenna gain. Check parameters
|
|
remoteismTxPowerMax and remoteismTxPowerMin for power setting range."
|
|
::= { ruism 3 }
|
|
|
|
ruismRxThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-90 | -85 | -80 | -75 | -70 | -65)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ISM RF rx threshold (in dBm). It specifies the receiver
|
|
sensitivity of the remote. By default, the radio's sensitivity is -82dBm.
|
|
The higher the threshold is, the less sensitive the radio will be.
|
|
In M5800S, the value -90 represents the rfrxthreshold is disabled."
|
|
::= { ruism 4 }
|
|
|
|
ruuniiTxPowerMax OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is only applicable to M5830S/P5830S radio.
|
|
The maximum UNII Tx power value can be set (in dBm)."
|
|
::= { ruunii 1 }
|
|
|
|
ruuniiTxPowerMin OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is only applicable to M5830S/P5830S radio.
|
|
The minimum UNII Tx power value can be set (in dBm)."
|
|
::= { ruunii 2 }
|
|
|
|
ruuniiTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is only applicable to M5830S/P5830S radio.
|
|
UNII RF tx power (in dBm). It specifies the power output
|
|
of the radio, excluding the antenna gain. Check parameters
|
|
apuniiTxPowerMax and apuniiTxPowerMin for power setting range."
|
|
::= { ruunii 3 }
|
|
|
|
ruuniiRxThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-90 | -85 | -80 | -75 | -70 | -65)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is only applicable to M5830S/P5830S radio.
|
|
UNII RF rx threshold (in dBm). It specifies the receiver
|
|
sensitivity of the master unit."
|
|
::= { ruunii 4 }
|
|
|
|
-- MIB version object
|
|
mibinfoVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trango remote unit MIB Version."
|
|
::= { mibinfo 1 }
|
|
|
|
-- End of file <trango_P5830S_RU_1p0.mib>
|
|
END
|
|
|