1810 lines
70 KiB
Plaintext
1810 lines
70 KiB
Plaintext
-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
|
|
|
|
-- $Id: fsla.mib,v 1.35 2013/06/04 13:10:14 siva Exp $
|
|
-- LA Proprietary MIB Definition
|
|
|
|
-- This document explains the proprietary MIB implemented
|
|
-- for LA product.
|
|
|
|
-- This proprietary MIB definition, supplements the standard IEEE802.3ad
|
|
-- MIB and also provides management of certain proprietary features of LA.
|
|
|
|
-- The proprietary MIB definitions follows:
|
|
|
|
|
|
SUPERMICRO-LA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
enterprises,Integer32,NOTIFICATION-TYPE,TimeTicks,Unsigned32,Counter32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, MacAddress
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC3411
|
|
InterfaceIndex,InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
PortList FROM Q-BRIDGE-MIB
|
|
dot3adAggEntry, dot3adAggPortEntry FROM IEEE8023-LAG-MIB;
|
|
|
|
--- basic OBJECT IDENTIFIER ::= { enterprises 2076 }
|
|
|
|
|
|
fsla MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "Super Micro Computer Inc."
|
|
CONTACT-INFO "support@Supermicro.com"
|
|
DESCRIPTION
|
|
" The proprietary MIB module for LA. "
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION
|
|
" The proprietary MIB module for LA. "
|
|
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 63 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
PortLaMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines how a Port Channel does channeling.
|
|
lacp(1) - place the port into passive
|
|
negotiation state, in which the
|
|
port waits for its peer to
|
|
initiate negotiation.
|
|
manual(2) - force the port to enable
|
|
channeling.
|
|
disable(3) - channeling is disabled."
|
|
|
|
SYNTAX INTEGER {
|
|
lacp(1),
|
|
manual(2),
|
|
disable(3)
|
|
}
|
|
|
|
LacpKey ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Actor or Partner Key value."
|
|
SYNTAX Integer32 (0..65535)
|
|
|
|
|
|
LacpState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Actor and Partner State values from the LACPDU."
|
|
SYNTAX BITS {
|
|
lacpActivity(0),
|
|
lacpTimeout(1),
|
|
aggregation(2),
|
|
synchronization(3),
|
|
collecting(4),
|
|
distributing(5),
|
|
defaulted(6),
|
|
expired(7)
|
|
}
|
|
|
|
DrcpState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administrative values of DRCP state."
|
|
SYNTAX BITS {
|
|
homeGateway(0),
|
|
neighborGateway(1),
|
|
otherGateway(2),
|
|
ippActivity(3),
|
|
timeout(4),
|
|
gatewaySync(5),
|
|
portSync(6),
|
|
expired(7)
|
|
}
|
|
|
|
AggState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the object entry."
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
|
|
PortalLinkList ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "4d,"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each four octets of the octet string represent an
|
|
ifIndex for an Intra-Port Link. The first ifIndex is
|
|
to Portal System 1, the second ifIndex is to Portal
|
|
System 2 and the third ifIndex is to portal System 3.
|
|
The ifIndex of the current portal system is set to zero."
|
|
SYNTAX OCTET STRING (SIZE (12))
|
|
|
|
-- ------------------------------------------------------------
|
|
-- groups in the MIB
|
|
-- ------------------------------------------------------------
|
|
|
|
fsLaSystem OBJECT IDENTIFIER ::= { fsla 1 }
|
|
fsLaPortChannel OBJECT IDENTIFIER ::= { fsla 2 }
|
|
fsLaPort OBJECT IDENTIFIER ::= { fsla 3 }
|
|
fsLaTrapObjects OBJECT IDENTIFIER ::= { fsla 4 }
|
|
fsFutureLaTraps OBJECT IDENTIFIER ::= { fsla 5 }
|
|
fsLaDLAGRemotePortChannel OBJECT IDENTIFIER ::= { fsla 6 }
|
|
fsLaDLAGRemotePort OBJECT IDENTIFIER ::= { fsla 7 }
|
|
fsLaDrni OBJECT IDENTIFIER ::= { fsla 8 }
|
|
fsLaIPP OBJECT IDENTIFIER ::= { fsla 9 }
|
|
|
|
-- ------------------------------------------------------------------
|
|
-- The La System Group
|
|
-- ------------------------------------------------------------------
|
|
|
|
fsLaSystemControl OBJECT-TYPE
|
|
SYNTAX INTEGER { start(1), shutdown(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start or shutdown Link Aggregation Module in the system
|
|
|
|
When set as 'start',resources required by Link aggregation
|
|
module are allocated & Link aggregation module starts running.
|
|
|
|
When shutdown, all resources used by Link aggregation module
|
|
will be released to the system "
|
|
::= { fsLaSystem 1 }
|
|
|
|
|
|
fsLaStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the Link Aggregation Module administrative status as
|
|
enabled or disabled. The module can be enabled only when this
|
|
object is set to 'enabled'."
|
|
::= { fsLaSystem 2 }
|
|
|
|
fsLaTraceOption OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable Trace Statements in
|
|
Link Aggregation Module.
|
|
|
|
A FOUR BYTE integer is used for enabling the level of tracing.
|
|
Each BIT in the four byte integer, represents a particular
|
|
level of Trace.
|
|
|
|
The mapping between the bit positions & the level of trace is
|
|
as follows:
|
|
0 - Init and Shutdown Traces
|
|
1 - Management Traces
|
|
2 - Data Path Traces
|
|
3 - Control Plane Traces
|
|
4 - Packet Dump Traces
|
|
5 - Traces related to All Resources except Buffers
|
|
6 - All Failure Traces
|
|
7 - Buffer Traces
|
|
|
|
The remaining bits are unused. Combination of levels are
|
|
also allowed.
|
|
|
|
For example if the bits 0 and 1 are set, then the Trace
|
|
statements related to Init-Shutdown and management
|
|
will be printed.
|
|
|
|
The user has to enter the corresponding INTEGER VALUE for the
|
|
bits set. For example if bits 0 and 1 are set then user has to
|
|
set the value 3."
|
|
DEFVAL { 0 }
|
|
::= { fsLaSystem 3 }
|
|
|
|
fsLaMaxPortsPerPortChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object specifies the maximun number of
|
|
ports that can attach to a port-channel"
|
|
::= { fsLaSystem 4 }
|
|
|
|
fsLaMaxPortChannels OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object specifies the maximum number of
|
|
Port-channels Present in the system"
|
|
::= { fsLaSystem 5 }
|
|
|
|
|
|
fsLaOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read only objects gives actual status of the Link
|
|
Aggregation Module (Operational status of module). When
|
|
Module is enabled Link Aggregation protocol starts
|
|
functioning. When the module is disabled all the dynamically
|
|
allocated memory will be freed and Link Aggregation protocol
|
|
stops functioning."
|
|
::= { fsLaSystem 6 }
|
|
|
|
|
|
fsLaActorSystemID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 6-octet read-write MAC address value used as a unique
|
|
identifier for the System."
|
|
::= { fsLaSystem 7 }
|
|
|
|
fsLaNoPartnerIndep OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, and if there is no remote partner information
|
|
available in the system then the port-channel becomes
|
|
operationally down and the member ports of the port-channel
|
|
operate as independent ports and these ports are visible to
|
|
higher layers.When disabled and if there is no remote partner
|
|
information available in the system then the port-channel
|
|
becomes operationally up based on the default values assigned
|
|
for the partner and the member ports of the port-channel
|
|
becomes operationally up and will not be visible to higher
|
|
layers."
|
|
DEFVAL { 2 }
|
|
::= { fsLaSystem 8 }
|
|
|
|
fsLaAutoLAG OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or Disable Auto-LAG on a switch globally."
|
|
::= { fsLaSystem 9 }
|
|
|
|
fsLaMlagSystemID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 6-octet read-write MAC address value that is used by
|
|
AutoLAG to configure system address for each MLAG portal."
|
|
::= { fsLaSystem 10 }
|
|
|
|
fsLaMlagSystemNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A global read-write value that is used by AutoLAG to
|
|
configure system number for each MLAG portal."
|
|
::= { fsLaSystem 11 }
|
|
--
|
|
-- Port Channel Table
|
|
--
|
|
|
|
fsLaPortChannelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsLaPortChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Port-channel is created through ifMain table.
|
|
After the creation of the port-channel, corresponding logical
|
|
interface will be created in the ifMain table.
|
|
This Port-channel table is indexed through Key values and allows to
|
|
configure link selection policy and the Mac address for
|
|
the port-channel. All other objects in this table displays
|
|
the details of the port-channel"
|
|
|
|
::= { fsLaPortChannel 1 }
|
|
|
|
fsLaPortChannelEntry OBJECT-TYPE
|
|
SYNTAX FsLaPortChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is one entry in this table for each created
|
|
port-channel port"
|
|
|
|
INDEX { fsLaPortChannelIfIndex }
|
|
::= { fsLaPortChannelTable 1 }
|
|
|
|
FsLaPortChannelEntry ::=
|
|
SEQUENCE {
|
|
fsLaPortChannelIfIndex InterfaceIndex,
|
|
fsLaPortChannelGroup LacpKey,
|
|
fsLaPortChannelAdminMacAddress MacAddress,
|
|
fsLaPortChannelMacSelection INTEGER,
|
|
fsLaPortChannelMode PortLaMode,
|
|
fsLaPortChannelPortCount Integer32,
|
|
fsLaPortChannelActivePortCount Integer32,
|
|
fsLaPortChannelSelectionPolicy INTEGER,
|
|
fsLaPortChannelDefaultPortIndex InterfaceIndexOrZero,
|
|
fsLaPortChannelMaxPorts Integer32,
|
|
fsLaPortChannelSelectionPolicyBitList Integer32,
|
|
fsLaPortChannelDLAGDistributingPortIndex InterfaceIndexOrZero,
|
|
fsLaPortChannelDLAGSystemID MacAddress,
|
|
fsLaPortChannelDLAGSystemPriority Integer32,
|
|
fsLaPortChannelDLAGPeriodicSyncTime Unsigned32,
|
|
fsLaPortChannelDLAGMSSelectionWaitTime Unsigned32,
|
|
fsLaPortChannelDLAGRolePlayed INTEGER,
|
|
fsLaPortChannelDLAGStatus INTEGER,
|
|
fsLaPortChannelDLAGRedundancy INTEGER,
|
|
fsLaPortChannelDLAGMaxKeepAliveCount Integer32,
|
|
fsLaPortChannelDLAGPeriodicSyncPduTxCount Counter32,
|
|
fsLaPortChannelDLAGPeriodicSyncPduRxCount Counter32,
|
|
fsLaPortChannelDLAGEventUpdatePduTxCount Counter32,
|
|
fsLaPortChannelDLAGEventUpdatePduRxCount Counter32,
|
|
fsLaPortChannelDLAGElectedAsMasterCount Counter32,
|
|
fsLaPortChannelDLAGElectedAsSlaveCount Counter32,
|
|
fsLaPortChannelTrapTxCount Counter32,
|
|
fsLaPortChannelDLAGDistributingPortList PortList,
|
|
fsLaPortChannelFallback INTEGER,
|
|
fsLaPortChannelFallbackTime TimeTicks,
|
|
fsLaPortChannelFallbackState INTEGER,
|
|
fsLaPortChannelFallbackSysId Integer32
|
|
}
|
|
|
|
fsLaPortChannelIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the port-channel(Aggregator's
|
|
interface index). "
|
|
::= { fsLaPortChannelEntry 1 }
|
|
|
|
fsLaPortChannelGroup OBJECT-TYPE
|
|
SYNTAX LacpKey
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in this table. "
|
|
::= { fsLaPortChannelEntry 2 }
|
|
|
|
|
|
fsLaPortChannelAdminMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is used for configuring MacAddress that is
|
|
to be used by the port-channel when fsLaPortChannelMacSelection
|
|
is force.
|
|
WARNING:The value configured should not conflict
|
|
with the MAC address of system ports that are not configured
|
|
to select this port-channel."
|
|
::= { fsLaPortChannelEntry 3 }
|
|
|
|
fsLaPortChannelMacSelection OBJECT-TYPE
|
|
SYNTAX INTEGER { dynamic(1), force(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicates the MAC address selection method for
|
|
for the port-channel.
|
|
Dynamic - System will reserve certain MAC address
|
|
for aggregators. These MAC address are
|
|
derived from BaseMac. If this object is
|
|
configured as dynamic, the system will
|
|
allocate MAC address from this pool.
|
|
Force - Port-channel MAC address configured through
|
|
fsLaPortChannelAdminMacAddress is used.
|
|
The value can be changed to Force only after configuring
|
|
a valid MAC address in fsLaPortChannelAdminMacAddress."
|
|
DEFVAL { 1 }
|
|
::= { fsLaPortChannelEntry 4 }
|
|
|
|
fsLaPortChannelMode OBJECT-TYPE
|
|
SYNTAX PortLaMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current Operating Channel Mode of the port
|
|
Lacp(1) - forcing the port to negotiate with the
|
|
partner.
|
|
manual(2) - force the port to enable channeling (Manual).
|
|
disable(3) - channeling is disabled."
|
|
::= { fsLaPortChannelEntry 5 }
|
|
|
|
fsLaPortChannelPortCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports actually configured to the port-channel"
|
|
::= { fsLaPortChannelEntry 6 }
|
|
|
|
fsLaPortChannelActivePortCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will give the number of ports that are attached to the
|
|
port-channel and actively carrying data traffic on the link."
|
|
::= { fsLaPortChannelEntry 7 }
|
|
|
|
fsLaPortChannelSelectionPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
macSrc(1),
|
|
macDst(2),
|
|
macSrcDst(3),
|
|
ipSrc(4),
|
|
ipDst(5),
|
|
ipSrcDst(6),
|
|
vlanId(7),
|
|
isid(8),
|
|
macSrcVid(9),
|
|
macDstVid(10),
|
|
macSrcDstVid(11),
|
|
mplsVcLabel(12),
|
|
mplsTunnelLabel(13),
|
|
mplsVcTunnelLabel(14)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link selection policy to be used by the port-channel.
|
|
Selection policy isid implies selection based on Service-instance
|
|
and is applicable only in Provider BackBone bridge."
|
|
DEFVAL {macSrcDst}
|
|
::= {fsLaPortChannelEntry 8}
|
|
|
|
fsLaPortChannelDefaultPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the default port that gets attached to the
|
|
aggregator. A value of 0 means there is no default port for
|
|
this port-channel.
|
|
If this object is set to 0, it will remove the current default
|
|
port from the aggregator.
|
|
To change the default port of an aggregator, first reset the
|
|
object to 0 and then set the new ifIndex as default port."
|
|
DEFVAL { 0 }
|
|
::= { fsLaPortChannelEntry 9 }
|
|
|
|
fsLaPortChannelMaxPorts OBJECT-TYPE
|
|
SYNTAX Integer32 (2..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the maximun number of
|
|
ports that can attach to a port-channel."
|
|
DEFVAL { 8 }
|
|
::= { fsLaPortChannelEntry 10 }
|
|
|
|
fsLaPortChannelSelectionPolicyBitList OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object is used to set the Link selection policy to be
|
|
used by the port-channel.
|
|
A FOUR BYTE integer is used for setting the selecting policy.
|
|
Each BIT in the four byte integer, represents a particular
|
|
selection policy.
|
|
The maping between the bit positions & the selection policy is
|
|
as follows:
|
|
macSrc(0), -- source MAC
|
|
macDst(1), -- destination MAC
|
|
vlanId(2), -- VLAN ID
|
|
isid(3), -- ISID
|
|
mplsLabel0(4), -- MPLS Label 0 ( top label )
|
|
mplsLabel1(5), -- MPLS Label 1 ( inner label 1)
|
|
mplsLabel2(6), -- MPLS Label 2 ( inner label 2)
|
|
ipSrc(7), -- Source IP address
|
|
ipDst(8), -- Destination IP address
|
|
ip6Src(9), -- Source IPv6 address
|
|
ip6Dst(10), -- Destination IPv6 address
|
|
l3Protocol(11),-- Layer 3 protocol specified in IP header
|
|
l4SrcPort(12), -- Layer 4 source port specified in L4 header ( tcp/udp port )
|
|
l4DstPort (13) -- Layer 4 destination port specified in L4 header ( tcp/udp port )
|
|
|
|
The remaining bits are unused. Selection of multiple bits
|
|
implies selection of corresponding attributes in the
|
|
packet header for configuring the port-channel selection policy.
|
|
|
|
For example if the bits 0 and 1 are set, then the selection
|
|
policy is based on source mac and destination mac.
|
|
|
|
This object would return failure if the selected bitlist is not supported in the
|
|
system(hardware)"
|
|
::= {fsLaPortChannelEntry 11}
|
|
|
|
fsLaPortChannelDLAGDistributingPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the distributing
|
|
port on which D-LAG periodic-sync and
|
|
D-LAG event-update messages will be sent/received
|
|
for D-LAG internal communication between the D-LAG
|
|
nodes.
|
|
|
|
Ports which are already part of Port channel should not be
|
|
configured as Distributing port.
|
|
|
|
D-LAG node should immediately detect and handle distributing port
|
|
failure with high priority and allow load to be carried on the all
|
|
the configured ports."
|
|
|
|
::= { fsLaPortChannelEntry 12 }
|
|
|
|
fsLaPortChannelDLAGSystemID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the common System ID in
|
|
D-LAG nodes to be used for communicating with the peer node
|
|
when D-LAG status is enabled.
|
|
|
|
Since all the D-LAG nodes use this common D-LAG system ID to
|
|
communicate with the peer node, for peer node it looks like
|
|
it has established a LAG with a single peer node though the
|
|
LAG is shared across multiple D-LAG nodes.
|
|
|
|
Configuring this object is not allowed when D-LAG status
|
|
is enabled. To configure this object first
|
|
D-LAG status should be set to disabled.
|
|
|
|
Disabling D-LAG/port-channel will not delete/reset the configured
|
|
value for this object.
|
|
|
|
This object uniquely identifies a D-LAG node and used in
|
|
master-slave-selection process when redundancy feature is
|
|
enabled in a D-LAG node to elect master/slave."
|
|
|
|
::= { fsLaPortChannelEntry 13 }
|
|
|
|
|
|
fsLaPortChannelDLAGSystemPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for configuring common system priority in
|
|
D-LAG nodes to be used for communicating with the peer node when
|
|
D-LAG status is enabled.
|
|
|
|
Since all the D-LAG nodes use this common D-LAG system priority
|
|
to communicate with the peer node, for peer node it looks like
|
|
it has established a LAG with a single peer node though the
|
|
LAG is shared across multiple D-LAG nodes.
|
|
|
|
Configuring this object is not allowed when D-LAG status
|
|
is enabled. To configure this object first
|
|
D-LAG status should be set to disabled.
|
|
|
|
Disabling D-LAG/port-channel will not delete/reset the configured
|
|
value for this object.
|
|
|
|
Value of this object is used in master-slave-selection process
|
|
when redundancy feature is enabled in a D-LAG node to elect
|
|
master/slave."
|
|
|
|
DEFVAL { 32768 }
|
|
::= { fsLaPortChannelEntry 14 }
|
|
|
|
|
|
fsLaPortChannelDLAGPeriodicSyncTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..90000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the D-LAG periodic sync timer
|
|
used in Distributed Link Aggregation.
|
|
Periodic sync timer is used to configure the transmission
|
|
interval of D-LAG periodic-sync PDUs. Periodic-sync timer
|
|
will be running individually in each D-LAG node.
|
|
|
|
if this object is configured with a value of '0', then no
|
|
periodic-sync messages will be sent from that D-LAG node.
|
|
|
|
|
|
The configured value of this timer is applicable only
|
|
from the next start/re-start of the timer.
|
|
|
|
Value of this object should be same in all D-LAG nodes,
|
|
Configuring this object to different values across the
|
|
D-LAG nodes of the same D-LAG may result in deletion of
|
|
maintained neighbor node information because of keep alive
|
|
mechanism and when D-LAG redundancy feature is enabled
|
|
then repeated toggling of role played by D-LAG nodes may
|
|
be observed.
|
|
|
|
The periodic sync timer has a period from 0 to 90 seconds,
|
|
configurable in units of 1 ms. For example, to configure
|
|
periodic sync timer as 6 seconds, configure the value as
|
|
6000. Default periodic sync timer value is 1 second."
|
|
DEFVAL { 1000 }
|
|
::={fsLaPortChannelEntry 15 }
|
|
|
|
fsLaPortChannelDLAGMSSelectionWaitTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..90000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the period for the
|
|
master slave selection wait timer used in Distributed
|
|
Link Aggregation.
|
|
|
|
This object is applicable, only if D-LAG status
|
|
and D-LAG redundancy feature is enabled.
|
|
Configuring this object when D-LAG staus and D-LAG redundancy
|
|
feature is disabled will not have any effect on functionality,
|
|
instead the value will be stored and the stored value will be
|
|
used next time when D-LAG the redundancy feature and D-LAG
|
|
status is enabled.
|
|
|
|
The master slave selection wait timer will be
|
|
started in D-LAG node to synchronize the
|
|
LAG information from the other D-LAG nodes when
|
|
Master-slave-selection process is initiated in a D-LAG node,
|
|
and on expiry of this timer master-slave-selection algorithm
|
|
will be applied.
|
|
|
|
The configured value of this timer is applicable only
|
|
from the next start/re-start of the timer.
|
|
|
|
The master slave selection wait timer has a period
|
|
from 0 to 90 seconds, configurable in units of 1 ms.
|
|
For example, to configure master slave selection wait
|
|
timer as 6 seconds, configure the value as
|
|
6000. Default master slave selection wait timer value
|
|
is 0 milliseconds."
|
|
|
|
DEFVAL { 0 }
|
|
::={fsLaPortChannelEntry 16 }
|
|
|
|
fsLaPortChannelDLAGRolePlayed OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), master(1), slave(2), backupmaster(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to hold the current role played by the device
|
|
participating in Distributed LAG.
|
|
|
|
This object is applicable, only if D-LAG status and D-LAG
|
|
redundancy feature is enabled.
|
|
|
|
This object will have the value 'master' when Master-Slave-selection
|
|
process is under progress (i.e. All the devices participating in
|
|
D-LAG Master-Slave-selection process will initially set this object
|
|
to value 'master') and after completion of Master-Slave-selection process,
|
|
role decided in the selection process for this device will be set to
|
|
this object.
|
|
|
|
Role Played by device can be
|
|
none(0) - Current role played by the device will be set
|
|
to none when redundancy feature is disabled.
|
|
master(1) - Current role played by the device is master.
|
|
slave (2) - Current role played by the device is slave.
|
|
backupmaster(3) - Current role played by the device will be set
|
|
to backup master when redundancy feature is disabled."
|
|
|
|
::={fsLaPortChannelEntry 17 }
|
|
|
|
fsLaPortChannelDLAGStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable or disable the D-LAG
|
|
functionality.
|
|
|
|
This object can be modified irrespective of whether
|
|
corresponding port-channel is enabled/disabled.
|
|
|
|
Configuring D-LAG status to enabled will only enable
|
|
load sharing functionality in D-LAG nodes.
|
|
|
|
Disabling a port-channel will not change/reset the
|
|
value of this object but configuring this object to
|
|
disabled will disable the D-LAG load sharing
|
|
functionality in that D-LAG node.
|
|
|
|
Configuring this object to enabled will not be allowed
|
|
if any of the below mentioned mandatory parameters for
|
|
D-LAG are not configured.
|
|
1. fsLaPortChannelDLAGSystemID
|
|
2. fsLaPortChannelDLAGDistributingPortIndex
|
|
or fsLaPortChannelDLAGDistributingPortList
|
|
|
|
Configuring this object to disabled will not delete
|
|
the above mentioned D-LAG mandatory parameters, Instead
|
|
same configured values will be used when the D-LAG status
|
|
is enabled again.
|
|
|
|
Default value for this object is disabled."
|
|
|
|
DEFVAL { disabled }
|
|
::= { fsLaPortChannelEntry 18 }
|
|
|
|
fsLaPortChannelDLAGRedundancy OBJECT-TYPE
|
|
SYNTAX INTEGER { on(1), off(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable/disable the redundancy feature
|
|
in D-LAG node.
|
|
|
|
When D-LAG redundancy feature is enabled, master-slave-selection
|
|
algorithm can be used to select master/slave/backup-master.
|
|
|
|
D-LAG redundancy configuration must be uniform across all the
|
|
D-LAG nodes. i.e. if D-LAG redundancy feature is enabled (on) in
|
|
one node then it should be enabled (on) in all the nodes that are
|
|
part of the same D-LAG. Configuring this object to different
|
|
values across the D-LAG nodes of the same D-LAG may result in
|
|
improper working of D-LAG redundancy feature.
|
|
|
|
Default value for this object is off."
|
|
|
|
DEFVAL { off }
|
|
::= { fsLaPortChannelEntry 19 }
|
|
|
|
fsLaPortChannelDLAGMaxKeepAliveCount OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only mib object is used to provide keep alive
|
|
mechanism when D-LAG status is enabled.
|
|
Each D-LAG node will have a Max Keep alive count and each D-LAG
|
|
node maintains seperate keep alive counts for all other remote
|
|
D-LAG nodes.
|
|
keep alive count of all remote D-LAG nodes will be incremented
|
|
every time periodic-sync timer expires but reset to zero for a
|
|
particular D-LAG node only on receiving periodic-sync/
|
|
event-update message from that particular remote D-LAG node.
|
|
if keep alive count of any of the Remote D-LAG node reaches
|
|
the max keep alive count, then that Remote D-LAG node will be
|
|
declared as operationally down/dead.
|
|
|
|
If this object is configured to value '0', then Keep-alive
|
|
mechanism will be disabled in that D-LAG node."
|
|
DEFVAL { 3 }
|
|
::= { fsLaPortChannelEntry 20 }
|
|
|
|
fsLaPortChannelDLAGPeriodicSyncPduTxCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used when Distributing feature is enabled in a
|
|
node to hold the number of periodic-sync PDUs sent on the
|
|
distributing port."
|
|
::= { fsLaPortChannelEntry 21 }
|
|
|
|
fsLaPortChannelDLAGPeriodicSyncPduRxCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used when Distributing feature is enabled in a
|
|
node to hold the number of periodic-sync PDUs received on the
|
|
distributing port."
|
|
::= { fsLaPortChannelEntry 22 }
|
|
|
|
fsLaPortChannelDLAGEventUpdatePduTxCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used when Distributing feature is enabled in a
|
|
node to hold the number of event-update PDUs sent on the
|
|
distributing port."
|
|
::={ fsLaPortChannelEntry 23 }
|
|
|
|
fsLaPortChannelDLAGEventUpdatePduRxCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used when Distributing feature is enabled in a
|
|
node to hold the number of event-update PDUs received on the
|
|
distributing port."
|
|
::={ fsLaPortChannelEntry 24 }
|
|
|
|
fsLaPortChannelDLAGElectedAsMasterCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used when Distributing feature and redundancy
|
|
feature both are enabled in a D-LAG node to hold the number of
|
|
times the port-channel has been selected as master."
|
|
::={fsLaPortChannelEntry 25 }
|
|
|
|
|
|
fsLaPortChannelDLAGElectedAsSlaveCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used when Distributing feature and redundancy
|
|
feature both are enabled in a D-LAG node to hold the number of
|
|
times the port-channel has been selected as slave."
|
|
::={fsLaPortChannelEntry 26 }
|
|
|
|
fsLaPortChannelTrapTxCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of trap messages sent from the port-channel."
|
|
::={fsLaPortChannelEntry 27 }
|
|
|
|
fsLaPortChannelDLAGDistributingPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the distributing
|
|
port list on which D-LAG periodic-sync and
|
|
D-LAG event-update messages will be sent/received
|
|
for D-LAG internal communication between the D-LAG
|
|
nodes.
|
|
|
|
Ports which are already part of Port channel should not be
|
|
added to Distributing port list.
|
|
|
|
D-LAG node should immediately detect and handle distributing port
|
|
failure with high priority and allow load to be carried on the all
|
|
the configured ports."
|
|
|
|
::= { fsLaPortChannelEntry 28 }
|
|
|
|
fsLaPortChannelFallback OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable or disable fallback on this port-channel."
|
|
::={fsLaPortChannelEntry 29}
|
|
|
|
fsLaPortChannelFallbackTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Duration of a port to bundle state."
|
|
::={fsLaPortChannelEntry 30}
|
|
|
|
fsLaPortChannelFallbackState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
init(0),
|
|
inactive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only object is used to display the fallback state in this port-channel.
|
|
init(0) - Fallback is disabled in this port-channel.
|
|
inactive(1) - Fallback is enabled, and doesn't receive LACPDU.
|
|
active(2) - Fallback is enabled, and doesn't receive LACPDU until fallback time expired."
|
|
::={fsLaPortChannelEntry 31}
|
|
|
|
fsLaPortChannelFallbackSysId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify which MLAG portal system can bring
|
|
up the local aggregator port if LACPDU is not received from the
|
|
LACP partner.
|
|
If this object is configured to value '0', then always bring up port
|
|
from Primary MLAG switch."
|
|
::={fsLaPortChannelEntry 32}
|
|
|
|
-- END OF LaPortChannel Table
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Fs Aggregation Port Group
|
|
-- -------------------------------------------------------------
|
|
|
|
fsLaPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsLaPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains objects to set the port lacp mode
|
|
of dot3adAggPortTable."
|
|
::={fsLaPort 1 }
|
|
|
|
fsLaPortEntry OBJECT-TYPE
|
|
SYNTAX FsLaPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table is for each physical port that participates
|
|
in Link Aggregation which can be either aggregatable or individual.
|
|
This table is indexed by the PortIndex."
|
|
INDEX {fsLaPortIndex }
|
|
::={fsLaPortTable 1 }
|
|
|
|
FsLaPortEntry ::=
|
|
SEQUENCE {
|
|
fsLaPortIndex InterfaceIndex,
|
|
fsLaPortMode PortLaMode,
|
|
fsLaPortBundleState INTEGER,
|
|
fsLaPortActorResetAdminState LacpState,
|
|
fsLaPortAggregateWaitTime TimeTicks,
|
|
fsLaPortPartnerResetAdminState LacpState,
|
|
fsLaPortActorAdminPort Integer32,
|
|
fsLaPortRestoreMtu Integer32,
|
|
fsLaPortSelectAggregator INTEGER,
|
|
fsLaPortAutoLAG INTEGER
|
|
}
|
|
|
|
fsLaPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the port"
|
|
::={fsLaPortEntry 1 }
|
|
|
|
fsLaPortMode OBJECT-TYPE
|
|
SYNTAX PortLaMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable LACP , disable LACP or manually
|
|
aggregate a port"
|
|
::={fsLaPortEntry 2 }
|
|
|
|
|
|
fsLaPortBundleState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
upInBndl(0),
|
|
standby(1),
|
|
down(2),
|
|
upIndividual(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only object is used to display the port state in aggregation
|
|
upInBndl(0) - The port is operationally up and actively
|
|
takes part in aggregation.
|
|
standby(1) - The port is capable of joining in
|
|
aggregation group, when any of the ports in
|
|
aggregation group goes down.
|
|
down(2) - The port is operationally down in lower layers.
|
|
or the port is operational in lower layers
|
|
but temporarily not able to participate
|
|
in aggregation because of different partner
|
|
information in the same group.
|
|
upIndividual(3) - The port is operating individually and
|
|
is not taking part in aggregation."
|
|
::={fsLaPortEntry 3}
|
|
|
|
fsLaPortActorResetAdminState OBJECT-TYPE
|
|
SYNTAX LacpState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of 8 bits,corresponding to the administrative values
|
|
of Actor_State as transmitted by the Actor in LACPDUs.
|
|
The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
|
|
the second bit corresponds to bit 1 (LACP_Timeout),the third bit
|
|
corresponds to bit 2 (Aggregation),the fourth bit corresponds to
|
|
bit 3 (Synchronization),the fifth bit corresponds to bit 4
|
|
(Collecting),the sixth bit corresponds to bit 5 (Distributing),
|
|
the seventh bit corresponds to bit 6 (Defaulted),and the eighth
|
|
bit corresponds to bit 7 (Expired).
|
|
This object allows the RESET of the values of Actor LACP_Activity,
|
|
LACP_Timeout and Aggregation.
|
|
Get operation on this object returns the current Port State of
|
|
the Actor"
|
|
::={fsLaPortEntry 4 }
|
|
|
|
|
|
fsLaPortAggregateWaitTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Duration of the port to attach to the PortChannel."
|
|
DEFVAL { 2 }
|
|
::={fsLaPortEntry 5 }
|
|
|
|
fsLaPortPartnerResetAdminState OBJECT-TYPE
|
|
SYNTAX LacpState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of 8 bits,corresponding to the administrative values
|
|
of Partner_State.The first bit corresponds to bit 0 of Partner_State
|
|
(LACP_Activity),the second bit corresponds to bit 1 (LACP_Timeout),
|
|
the third bit corresponds to bit 2 (Aggregation),the fourth bit
|
|
corresponds to bit 3 (Synchronization),the fifth bit corresponds to
|
|
bit 4 (Collecting),the sixth bit corresponds to bit 5 (Distributing),
|
|
the seventh bit corresponds to bit 6 (Defaulted),and the eighth
|
|
bit corresponds to bit 7 (Expired).
|
|
This object allows the RESET of the values of Partner LACP_Activity,
|
|
LACP_Timeout and Aggregation.
|
|
Get operation on this object returns zeros for
|
|
the Partner administrative values"
|
|
::={fsLaPortEntry 6 }
|
|
|
|
fsLaPortActorAdminPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number used as dot3adAggPortActorPort and is
|
|
communicated in LACPDUs as the Actor_Port."
|
|
::={fsLaPortEntry 7 }
|
|
|
|
fsLaPortRestoreMtu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Restore mtu stores the original MTU of the port
|
|
before getting aggregated to port channel.
|
|
A SET on the MIB object is not allowed for SNMP users.
|
|
This operation is allowed only during config-save-restore
|
|
operation , during system initialization."
|
|
|
|
::={fsLaPortEntry 8 }
|
|
|
|
fsLaPortSelectAggregator OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(0),
|
|
dynamic(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only object is used to display whether the port participates
|
|
in dynamic aggregator selection. The default will be static aggregation
|
|
selection.
|
|
static(0) - The port is involved only in static aggregation.
|
|
i.e. the port can be a member of only the aggregation
|
|
to which it is configured.
|
|
dynamic(1) - The port participates in dynamic aggregation
|
|
selection. i.e. the port will be a part of best
|
|
aggregation selected based on System id and Admin key.
|
|
This object is set to 'dynamic' once the port is configured as a default
|
|
port of a port channel."
|
|
::={fsLaPortEntry 9}
|
|
|
|
fsLaPortAutoLAG OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or Disable Auto-LAG on individual port."
|
|
::={fsLaPortEntry 10}
|
|
|
|
-- END OF LAPort Table
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Trap objects Group
|
|
-- -------------------------------------------------------------
|
|
|
|
fsLaHwFailTrapObjectsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsLaHwFailTrapObjectsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This table is used to store the notification information
|
|
occurred "
|
|
::= { fsLaTrapObjects 1 }
|
|
|
|
fsLaHwFailTrapObjectsEntry OBJECT-TYPE
|
|
SYNTAX FsLaHwFailTrapObjectsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This entry is used to store the notification information"
|
|
INDEX { fsLaTrapPortChannelIndex, fsLaTrapPortIndex}
|
|
::= { fsLaHwFailTrapObjectsTable 1 }
|
|
|
|
FsLaHwFailTrapObjectsEntry ::=
|
|
SEQUENCE {
|
|
fsLaTrapPortChannelIndex InterfaceIndex,
|
|
fsLaTrapPortIndex InterfaceIndexOrZero,
|
|
fsLaHwFailTrapType INTEGER
|
|
}
|
|
|
|
fsLaTrapPortChannelIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the port-channel for which the failure has occured."
|
|
::= { fsLaHwFailTrapObjectsEntry 1 }
|
|
|
|
fsLaTrapPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the port for which the failure has occured.
|
|
A value of 0 means the failure is not port-specific."
|
|
::= { fsLaHwFailTrapObjectsEntry 2 }
|
|
|
|
fsLaHwFailTrapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
createAgg(0),
|
|
addLinkToAgg(1),
|
|
deleteAgg(2),
|
|
removeLinkFromAgg(3),
|
|
setSelectionPolicy(4),
|
|
enableCollection(5),
|
|
disableCollection(6),
|
|
enableDistribution(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hardware error type."
|
|
::= { fsLaHwFailTrapObjectsEntry 3 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Trap Notifications
|
|
-- -------------------------------------------------------------
|
|
|
|
fsLaTraps OBJECT IDENTIFIER ::= {fsFutureLaTraps 0}
|
|
|
|
fsLaHwFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsLaHwFailTrapType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when any of the fsLaHwFailTrapType event occurs"
|
|
::= { fsLaTraps 1 }
|
|
|
|
------------------------------------------------------------
|
|
-- D-LAG Trap table
|
|
------------------------------------------------------------
|
|
|
|
fsLaDLAGTrapObjectsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsLaDLAGTrapObjectsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to store the notification information
|
|
occurred for the Distributed Link Aggregation."
|
|
::= { fsLaTrapObjects 2 }
|
|
|
|
fsLaDLAGTrapObjectsEntry OBJECT-TYPE
|
|
SYNTAX FsLaDLAGTrapObjectsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry is used to store the notification information."
|
|
INDEX { fsLaDLAGTrapPortChannelIndex }
|
|
::= { fsLaDLAGTrapObjectsTable 1 }
|
|
|
|
FsLaDLAGTrapObjectsEntry ::=
|
|
SEQUENCE {
|
|
fsLaDLAGTrapPortChannelIndex InterfaceIndex,
|
|
fsLaDLAGTrapType INTEGER
|
|
}
|
|
|
|
fsLaDLAGTrapPortChannelIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port-channel interface index of the node which is
|
|
role change event has occurred because of the
|
|
master-slave-re-selection process.
|
|
The role change can be either from master to slave
|
|
or from slave to master."
|
|
::= { fsLaDLAGTrapObjectsEntry 1 }
|
|
|
|
fsLaDLAGTrapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mastertobackupmaster (0),
|
|
backupmastertomaster (1),
|
|
slavetobackupmaster (2),
|
|
backupmastertoslave (3),
|
|
mastertoslave (4),
|
|
slavetomaster (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traps generated in the master-slave selection/ master-slave-reselection process
|
|
Trap Type can be
|
|
mastertobackupmaster : When the role played by the device changes
|
|
from master to backup-master.
|
|
backupmastertomaster : When the role played by the device changes
|
|
from backup-master to master.
|
|
slavetobackupmaster : When the role played by the device changes
|
|
from slave to backup-master.
|
|
backupmastertoslave : When the role played by the device changes
|
|
from backup-master to slave.
|
|
mastertoslave : When the role played by the device changes
|
|
from master to slave.
|
|
slavetomaster : When the role played by the device changes
|
|
from slave to master."
|
|
::= { fsLaDLAGTrapObjectsEntry 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The D-LAG Trap Notifications
|
|
-- -------------------------------------------------------------
|
|
|
|
fsLaDLAGTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsLaDLAGTrapType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when any of the fsLaDLAGTrapType event occurs."
|
|
::= { fsLaTraps 2 }
|
|
|
|
---------------------------------------------------------------
|
|
-- The Remote Fs Aggregation Port Channel Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsLaDLAGRemotePortChannelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsLaDLAGRemotePortChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to access the stored details of
|
|
all remote port-channels that are part of same D-LAG.
|
|
This table is indexed by Port channel index and
|
|
remote port-channel unique system id.
|
|
All other objects in this table displays stored
|
|
details of the remote port-channel."
|
|
::= { fsLaDLAGRemotePortChannel 1 }
|
|
|
|
fsLaDLAGRemotePortChannelEntry OBJECT-TYPE
|
|
SYNTAX FsLaDLAGRemotePortChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is one entry in this table for each remote port-channel
|
|
participating in Distributed LAG other than the self."
|
|
INDEX { fsLaPortChannelIfIndex, fsLaDLAGRemotePortChannelSystemID }
|
|
::= { fsLaDLAGRemotePortChannelTable 1 }
|
|
|
|
FsLaDLAGRemotePortChannelEntry ::=
|
|
SEQUENCE {
|
|
fsLaDLAGRemotePortChannelSystemID MacAddress,
|
|
fsLaDLAGRemotePortChannelSystemPriority Integer32,
|
|
fsLaDLAGRemotePortChannelRolePlayed INTEGER,
|
|
fsLaDLAGRemotePortChannelKeepAliveCount Integer32
|
|
}
|
|
|
|
fsLaDLAGRemotePortChannelSystemID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is used to read the stored 6-octet MAC address value
|
|
of each remote D-LAG node, which uniquely identifies the
|
|
remote D-LAG node."
|
|
::= { fsLaDLAGRemotePortChannelEntry 1 }
|
|
|
|
fsLaDLAGRemotePortChannelSystemPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to read the stored system priority of
|
|
each remote D-LAG node"
|
|
::={fsLaDLAGRemotePortChannelEntry 2}
|
|
|
|
fsLaDLAGRemotePortChannelRolePlayed OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), master(1), slave(2), backupmaster(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to read the stored value of
|
|
current role played by each remote D-LAG node
|
|
|
|
Value of Role Played by the remote D-LAG node can be
|
|
none (0) - Current role played by the remote D-LAG node
|
|
is none.
|
|
master (1) - Current role played by the remote D-LAG node
|
|
is master.
|
|
slave (2) - Current role played by the remote D-LAG node
|
|
is slave.
|
|
backupmaster (3) - Current role played by the remote D-LAG node
|
|
is backup-master."
|
|
::={fsLaDLAGRemotePortChannelEntry 3}
|
|
|
|
fsLaDLAGRemotePortChannelKeepAliveCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current keep alive count value of
|
|
running keep alive counter maintained for each remote D-LAG node.
|
|
|
|
This count will be incremented by value 1 for all the remote
|
|
D-LAG node entries on each periodic-sync timer expiry and will
|
|
be reset to zero for a particular remote D-LAG node entry on
|
|
receiving a periodic-sync/event-update message from that
|
|
particular remote D-LAG node.
|
|
If this count value for a remote D-LAG node becomes equal to
|
|
fsLaPortChannelDLAGMaxKeepAliveCount then that remote D-LAG node
|
|
will be considered as down/dead and corresponding entry will be
|
|
deleted from the remote port-channel info list."
|
|
|
|
::={fsLaDLAGRemotePortChannelEntry 4 }
|
|
|
|
----------------------------------------------------------------
|
|
-- END OF Remote D-LAG Aggregation Port Channel Table
|
|
-- -------------------------------------------------------------
|
|
|
|
---------------------------------------------------------------
|
|
-- The Remote D-LAG Aggregation Port Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsLaDLAGRemotePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsLaDLAGRemotePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to access the stored port list information
|
|
of each remote D-LAG node.
|
|
This table is indexed by combination of port-channel index,
|
|
remote port-channel unique system ID, and port indices configured
|
|
for that remote D-LAG node."
|
|
|
|
::= { fsLaDLAGRemotePort 1 }
|
|
|
|
fsLaDLAGRemotePortEntry OBJECT-TYPE
|
|
SYNTAX FsLaDLAGRemotePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is one entry in this table for each port belonging
|
|
to the remote D-LAG node."
|
|
INDEX { fsLaPortChannelIfIndex, fsLaDLAGRemotePortChannelSystemID, fsLaDLAGRemotePortIndex }
|
|
::= { fsLaDLAGRemotePortTable 1 }
|
|
|
|
FsLaDLAGRemotePortEntry ::=
|
|
SEQUENCE {
|
|
fsLaDLAGRemotePortIndex InterfaceIndex,
|
|
fsLaDLAGRemotePortBundleState INTEGER,
|
|
fsLaDLAGRemotePortSyncStatus INTEGER
|
|
}
|
|
|
|
fsLaDLAGRemotePortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to get the ifIndex of each port
|
|
belonging to the remote D-LAG node."
|
|
::={fsLaDLAGRemotePortEntry 1 }
|
|
|
|
fsLaDLAGRemotePortBundleState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
upInBndl(0),
|
|
standby(1),
|
|
down(2),
|
|
upIndividual(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only object is used to get the port bundle states of each port belonging
|
|
to the remote D-LAG node
|
|
upInBndl(0) - The port is operationally up and actively takes part in aggregation.
|
|
standby(1) - The port is capable of joining in aggregation group, when any of the ports in
|
|
aggregation group goes down.
|
|
down(2) - The port is operationally down in lower layers.
|
|
or the port is operational in lower layers but temporarily not able
|
|
to participate in aggregation because of different partner
|
|
information in the same group.
|
|
upIndividual(3) - The port is operating individually and is not taking part in aggregation."
|
|
::={fsLaDLAGRemotePortEntry 2}
|
|
|
|
fsLaDLAGRemotePortSyncStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inSync(1),
|
|
outofSync(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only object is used to get the current sync status
|
|
of the each port belonging to the remote D-LAG node
|
|
inSync(1) - The port sync status is inSync.
|
|
outofSync(2) - The port sync status is out-of-sync."
|
|
::={fsLaDLAGRemotePortEntry 3}
|
|
|
|
fsLaDrniTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsLaDrniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every
|
|
DRNI that is associated with this System."
|
|
REFERENCE
|
|
"7.4.1"
|
|
::= { fsLaDrni 1 }
|
|
|
|
fsLaDrniEntry OBJECT-TYPE
|
|
SYNTAX FsLaDrniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of the DRNI parameters. This is indexed
|
|
by the DRNI Portal ID."
|
|
INDEX { fsLaDrniIndex }
|
|
::= { fsLaDrniTable 1 }
|
|
|
|
FsLaDrniEntry ::=
|
|
SEQUENCE {
|
|
fsLaDrniIndex
|
|
InterfaceIndex,
|
|
fsLaDrniDescription
|
|
SnmpAdminString,
|
|
fsLaDrniName
|
|
SnmpAdminString,
|
|
fsLaDrniPortalAddr
|
|
MacAddress,
|
|
fsLaDrniPortalPriority
|
|
Integer32,
|
|
fsLaDrniPortalSystemNumber
|
|
Integer32,
|
|
fsLaDrniIntraPortalLinkList
|
|
PortalLinkList,
|
|
fsLaDrniAggregator
|
|
InterfaceIndex,
|
|
fsLaDrniNeighborAdminDRCPState
|
|
DrcpState,
|
|
fsLaDrniPSI
|
|
TruthValue
|
|
}
|
|
|
|
fsLaDrniIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier allocated to this Distributed Relay by
|
|
the local System. This attribute identifies a Distributed Relay
|
|
instance among the subordinate managed objects of the
|
|
containing object. This value is read-only. NOTE - The aDrniID
|
|
is represented in the SMIv2 MIB as an ifIndex-see D.5."
|
|
REFERENCE
|
|
"7.4.1.1.1"
|
|
::= { fsLaDrniEntry 1 }
|
|
|
|
fsLaDrniDescription OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A human-readable text string containing information about the
|
|
Distribute Relay. This string is read-only. The contents are
|
|
vendor specific."
|
|
REFERENCE
|
|
"7.4.1.1.2"
|
|
::= { fsLaDrniEntry 2 }
|
|
|
|
fsLaDrniName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A human-readable text string containing a locally significant
|
|
name for the Distributed Relay. This string is read-write."
|
|
REFERENCE
|
|
"7.4.1.1.3"
|
|
::= { fsLaDrniEntry 3 }
|
|
|
|
fsLaDrniPortalAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-write identifier of a particular Portal.
|
|
aDrniPortalAddr has to be unique among at least all of the
|
|
potential Portal Systems to which a given Portal System might
|
|
be attached via an IPL Intra-Portal Link. Also used as the
|
|
Actor's System ID (6.3.2) for the emulated system."
|
|
REFERENCE
|
|
"7.4.1.1.4"
|
|
::= { fsLaDrniEntry 4 }
|
|
|
|
|
|
fsLaDrniPortalPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 2-octet read-write value indicating the priority value
|
|
associated with the Portal's System ID. Also used as the
|
|
Actor's System Priority (6.3.2) for the emulated system."
|
|
REFERENCE
|
|
"7.4.1.1.5"
|
|
::= { fsLaDrniEntry 5 }
|
|
|
|
fsLaDrniPortalSystemNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-write identifier of this particular Portal System
|
|
within a Portal. It is the responsibility of the network
|
|
administrator to ensure that these numbers are unique among
|
|
the Portal Systems with the same aDrniPortalAddr (7.4.1.1.4)."
|
|
REFERENCE
|
|
"7.4.1.1.7"
|
|
::= { fsLaDrniEntry 6 }
|
|
|
|
fsLaDrniIntraPortalLinkList OBJECT-TYPE
|
|
SYNTAX PortalLinkList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Read-write list of the Interface Identifiers of the Ports to
|
|
the Intra-Portal Links assigned to this Distributed Relay. Each
|
|
Interface Identifier, a Port ID (6.3.4), has the two least
|
|
significant bits of its Port Priority (7.3.2.1.15) configured
|
|
to match the Portal System Number of the attached Portal
|
|
System. The number of IPLs in the list depends on the Portal
|
|
topology. For a Portal of three Portal Systems two or three
|
|
IPLs can be used, for a Portal of two Portal Systems a single
|
|
IPL is required and for a single Portal System no IPL is
|
|
required."
|
|
REFERENCE
|
|
"7.4.1.1.8"
|
|
::= { fsLaDrniEntry 7 }
|
|
|
|
fsLaDrniAggregator OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An INTEGER that matches the syntax of an Interface Identifier.
|
|
Read-write Interface Identifier of the Aggregator Port assigned
|
|
to this Distributed Relay."
|
|
REFERENCE
|
|
"7.4.1.1.9"
|
|
::= { fsLaDrniEntry 8 }
|
|
|
|
|
|
fsLaDrniNeighborAdminDRCPState OBJECT-TYPE
|
|
SYNTAX DrcpState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of 8 bits, corresponding to the administrative
|
|
values of DRCP_State [item s) in 9.4.3.2] as transmitted by
|
|
this Portal System in DRCPDUs. The first bit corresponds to
|
|
bit 0 of DRCP_State (HomeGateway), the second bit corresponds
|
|
to bit 1 (NeighborGateway), the third bit corresponds to bit 2
|
|
(OtherGateway), the fourth bit corresponds to bit 3
|
|
(IppActivity), the fifth bit corresponds to bit 4 (Timeout),
|
|
the sixth bit corresponds to bit 5 (GatewaySync), the seventh
|
|
bit corresponds to bit 6 (PortSync), and the eighth bit
|
|
corresponds to bit 7 (Expired). These values allow
|
|
administrative control over the values of HomeGateway,
|
|
NeighborGateway, OtherGateway, IppActivity, and Timeout. Their
|
|
values are by default set to FALSE. This attribute value is
|
|
read-write."
|
|
REFERENCE
|
|
"7.4.1.1.16"
|
|
::= { fsLaDrniEntry 9 }
|
|
|
|
fsLaDrniPSI OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only Boolean value providing the value of PSI, which
|
|
indicates whether this Portal System is isolated from the
|
|
other Portal Systems within the same Portal ('TRUE') or not
|
|
('FALSE')."
|
|
REFERENCE
|
|
"7.4.1.1.22"
|
|
::= { fsLaDrniEntry 10 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- IPP Attribute Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsLaIPPAttributeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsLaIPPAttributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every
|
|
IPP that is associated with this System."
|
|
REFERENCE
|
|
"7.4.2"
|
|
::= { fsLaIPP 1 }
|
|
|
|
fsLaIPPAttributeEntry OBJECT-TYPE
|
|
SYNTAX FsLaIPPAttributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing Attributes for an IPP."
|
|
INDEX { fsLaIPPIndex }
|
|
::= { fsLaIPPAttributeTable 1 }
|
|
|
|
FsLaIPPAttributeEntry ::=
|
|
SEQUENCE {
|
|
fsLaIPPIndex
|
|
InterfaceIndex,
|
|
fsLaIPPAdminState
|
|
AggState,
|
|
fsLaIPPOperState
|
|
AggState,
|
|
fsLaIPPTimeOfLastOperChange
|
|
Integer32
|
|
}
|
|
|
|
fsLaIPPIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier allocated to this IPP by the
|
|
local Portal System. This attribute identifies an
|
|
IPP instance among the subordinate managed objects of
|
|
the containing object. This value is read-only.
|
|
NOTE-The aIPPID is represented in the SMIv2 MIB as
|
|
an ifIndex-see D.5."
|
|
REFERENCE
|
|
"7.4.2.1.1"
|
|
::= { fsLaIPPAttributeEntry 1 }
|
|
|
|
fsLaIPPAdminState OBJECT-TYPE
|
|
SYNTAX AggState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-write value defines the administrative state of
|
|
the IPP. A value of 'up' indicates that the operational state
|
|
of the IPP (aIPPOperState) is permitted to be either up or
|
|
down. A value of 'down' forces the operational state of the IPP
|
|
to be down. A GET operation returns the current administrative
|
|
state. A SET operation changes the administrative state to a
|
|
new value."
|
|
REFERENCE
|
|
"7.4.2.1.4"
|
|
::= { fsLaIPPAttributeEntry 2 }
|
|
|
|
fsLaIPPOperState OBJECT-TYPE
|
|
SYNTAX AggState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only value defines the operational state of the
|
|
IPP. The operational state is 'up' if the IPL is operational,
|
|
and if the value of aIPPAdminState for the IPP is also 'up'.
|
|
If the IPL is not operational, or if the administrative state
|
|
of the IPP (aIPPAdminState) is 'down', then the operational
|
|
state is 'down.' An operational state of 'up' indicates that
|
|
the IPP is available for use by the DR Function; a value of
|
|
'down' indicates that the IPP is not available for use by the
|
|
DR Function."
|
|
REFERENCE
|
|
"7.4.2.1.5"
|
|
::= { fsLaIPPAttributeEntry 3 }
|
|
|
|
fsLaIPPTimeOfLastOperChange OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time at which the interface entered its current
|
|
operational state, in terms of centiseconds since the
|
|
system was last reset. If the current state was entered
|
|
prior to the last reinitialization of the local network
|
|
management subsystem, then this object contains a value of
|
|
zero. The ifLastChange object in the Interfaces MIB defined
|
|
in IETF RFC 2863 is a suitable object for supplying a
|
|
value for aIPPTimeOfLastOperChange. This value is read-only."
|
|
REFERENCE
|
|
"7.4.2.1.6"
|
|
::= { fsLaIPPAttributeEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- IPP Statistics Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsLaIPPStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsLaIPPStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information for IPP
|
|
statistics. A row appears in this table for
|
|
each IPP in the system."
|
|
REFERENCE
|
|
"7.4.3"
|
|
::= { fsLaIPP 2 }
|
|
|
|
fsLaIPPStatsEntry OBJECT-TYPE
|
|
SYNTAX FsLaIPPStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing Statistics for an IPP."
|
|
INDEX { fsLaIPPIndex }
|
|
::= { fsLaIPPStatsTable 1 }
|
|
|
|
FsLaIPPStatsEntry ::=
|
|
SEQUENCE {
|
|
fsLaIPPStatsDRCPDUsRx
|
|
Counter64,
|
|
fsLaIPPStatsIllegalRx
|
|
Counter64,
|
|
fsLaIPPStatsDRCPDUsTx
|
|
Counter64
|
|
}
|
|
|
|
fsLaIPPStatsDRCPDUsRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS
|
|
"frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid DRCPDUs received on this IPP. This value
|
|
is read-only."
|
|
REFERENCE
|
|
"7.4.3.1.2"
|
|
::= { fsLaIPPStatsEntry 1 }
|
|
|
|
fsLaIPPStatsIllegalRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS
|
|
"frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames received that carry the DRCP Ethernet
|
|
Type value (9.4.2.4), but contain a badly formed PDU. This
|
|
value is read-only."
|
|
REFERENCE
|
|
"7.4.3.1.3"
|
|
::= { fsLaIPPStatsEntry 2 }
|
|
|
|
|
|
fsLaIPPStatsDRCPDUsTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS
|
|
"frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DRCPDUs transmitted on this IPP. This value
|
|
is read-only."
|
|
REFERENCE
|
|
"7.4.3.1.4"
|
|
::= { fsLaIPPStatsEntry 3 }
|
|
|
|
-------------------------------------------------------
|
|
-- END OF Remote D-LAG Aggregation Port Table
|
|
------------------------------------------------------
|
|
END
|