Observium_CE/mibs/supermicro/SUPERMICRO-IPDB-MIB

537 lines
19 KiB
Plaintext

-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
-- $Id: fsipdb.mib,v 1.5 2012/09/07 09:52:05 siva Exp $
-- IP-BINDING-DATABASE Proprietary MIB Definition
-- This MIB contains scalars and tables used to configure/storing
-- (HOST, IP) binding informations.
SUPERMICRO-IPDB-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
enterprises, IpAddress, Counter32,
Integer32, Unsigned32 FROM SNMPv2-SMI
RowStatus, MacAddress FROM SNMPv2-TC
InterfaceIndex FROM IF-MIB;
fsipdb MODULE-IDENTITY
LAST-UPDATED "201209050000Z"
ORGANIZATION "Super Micro Computer Inc."
CONTACT-INFO "support@Supermicro.com"
DESCRIPTION
" The proprietary MIB module for IPDB module. Used to maintain
the hosts IP, MAC & VLAN in a database which will be used to
allow/drop the incoming IP traffic on a specific interface. "
REVISION "201209050000Z"
DESCRIPTION
" Inclusion of debug option for IPDB module. "
REVISION "201005240000Z"
DESCRIPTION
" Addition of 'fsIpDbSrcGuardConfigTable', which is used to
configure IP source guard status per Layer 2 interfaces basis.
IP source guard is used to restrict the IP traffic on Layer 2
interfaces by filtering traffic based on the IP binding
database."
REVISION "201005170000Z"
DESCRIPTION
"Grammatical and Spelling mistakes are removed. "
::= { enterprises supermicro-computer-inc(10876) super-switch(101)
basic(2) 2}
-- ***************************************************************************
-- Groups in the MIB
-- ***************************************************************************
fsIpDbScalars OBJECT IDENTIFIER ::= { fsipdb 1 }
fsIpDbStatic OBJECT IDENTIFIER ::= { fsipdb 2 }
fsIpDbBindings OBJECT IDENTIFIER ::= { fsipdb 3 }
fsIpDbInterface OBJECT IDENTIFIER ::= { fsipdb 4 }
fsIpDbSrcGuard OBJECT IDENTIFIER ::= { fsipdb 5 }
-- ***************************************************************************
-- SCALARS
-- ***************************************************************************
fsIpDbNoOfBindings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of (host, IP) bindings, across
all VLAN's, at a given time. This is nothing but the total
number of entries in the IP binding database"
::= { fsIpDbScalars 1 }
fsIpDbNoOfStaticBindings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of static (host, IP) bindings,
across all VLANS, at the given time."
::= { fsIpDbScalars 2 }
fsIpDbNoOfDHCPBindings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of (host, IP) bindings configured
through DHCP, across all VLANS, at the given time."
::= { fsIpDbScalars 3 }
fsIpDbNoOfPPPBindings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of (host, IP) bindings configured
through PPP, across all VLANS, at the given time."
::= { fsIpDbScalars 4 }
fsIpDbTraceLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable trace statements in IP binding
database module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particular
trace level.
The mapping between the bit positions & the trace level is
as follows:
BIT 1 - Function entry traces
BIT 2 - Function Exit traces
BIT 3 - Debug traces
BIT 4 - Failure traces
BIT 5 - Function arguments trace
The remaining bits are unused. Combination of levels are
also allowed.
For example if the bits 1 and 2 are set, then the trace
statement related to function entry and exit will be printed.
The user has to enter the corresponding integer value for the
bits set. For example if bits 1 and 2 are to be set ,then user
has to give the value 6."
::= { fsIpDbScalars 5 }
-- ***************************************************************************
-- GROUPS
-- ***************************************************************************
-- ********************** (HOST, IP) Static Bindings *************************
fsIpDbStaticBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpDbStaticBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the static Host IP configuration
information."
::= { fsIpDbStatic 1}
fsIpDbStaticBindingEntry OBJECT-TYPE
SYNTAX FsIpDbStaticBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single entry contains the binding information of a single
host connected to the system."
INDEX {
fsIpDbStaticHostVlanId,
fsIpDbStaticHostMac
}
::= { fsIpDbStaticBindingTable 1 }
FsIpDbStaticBindingEntry ::= SEQUENCE {
fsIpDbStaticHostVlanId Integer32,
fsIpDbStaticHostMac MacAddress,
fsIpDbStaticHostIp IpAddress,
fsIpDbStaticInIfIndex Integer32,
fsIpDbStaticGateway IpAddress,
fsIpDbStaticBindingStatus RowStatus
}
fsIpDbStaticHostVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID to which the host belongs. This is an index of
the table."
::= { fsIpDbStaticBindingEntry 1 }
fsIpDbStaticHostMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC address of the Host. This is an index of the table."
::= { fsIpDbStaticBindingEntry 2 }
fsIpDbStaticHostIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the Host."
::= { fsIpDbStaticBindingEntry 3 }
fsIpDbStaticInIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface to which the host is connected."
::= { fsIpDbStaticBindingEntry 4 }
fsIpDbStaticGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the gateway to which the Host have access to."
::= { fsIpDbStaticBindingEntry 5 }
fsIpDbStaticBindingStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rowstatus of the binding table entry. All the objects in the
table must be filled before making the rowstatus as active."
::= { fsIpDbStaticBindingEntry 6 }
-- ********************** (HOST, IP) Binding Database ************************
fsIpDbBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpDbBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the information about all the hosts connected
to the system, their MAC Address, VLAN, IP etc."
::= { fsIpDbBindings 1}
fsIpDbBindingEntry OBJECT-TYPE
SYNTAX FsIpDbBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single entry contains the binding information of a single
host connected to the system."
INDEX {
fsIpDbHostVlanId,
fsIpDbHostMac
}
::= { fsIpDbBindingTable 1 }
FsIpDbBindingEntry ::= SEQUENCE {
fsIpDbHostVlanId Integer32,
fsIpDbHostMac MacAddress,
fsIpDbHostBindingType INTEGER,
fsIpDbHostIp IpAddress,
fsIpDbHostInIfIndex Integer32,
fsIpDbHostRemLeaseTime Integer32,
fsIpDbHostBindingID Unsigned32
}
fsIpDbHostVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID to which the host belongs. This is an index of
the table."
::= { fsIpDbBindingEntry 1 }
fsIpDbHostMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC address of the Host. This is an index of the table."
::= { fsIpDbBindingEntry 2 }
fsIpDbHostBindingType OBJECT-TYPE
SYNTAX INTEGER { static (1), dhcp (2), ppp (3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the entry was configured through static
or dynamically learnt through DHCP or PPP."
::= { fsIpDbBindingEntry 3 }
fsIpDbHostIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the Host."
::= { fsIpDbBindingEntry 4 }
fsIpDbHostInIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the interface to which the host is connected."
::= { fsIpDbBindingEntry 5 }
fsIpDbHostRemLeaseTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Remaining lease time in seconds for the (host, IP) binding.
Applicable only if the fsIpDbBindingType is DHCP."
::= { fsIpDbBindingEntry 6 }
fsIpDbHostBindingID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value that identifies the binding type. For Static
Bindings, this value is 0. For DHCP Bindings, this is the
transaction ID. For PPP Bindings, this is the session ID
of PPPoE session."
::= { fsIpDbBindingEntry 7 }
-- Below is the Gateway Table corresponding to each binding entry.
-- Each binding entry will contain a table of Gateway IPs,
-- which will contain atleast one (default gateway) gateway IP entry.
fsIpDbGatewayIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpDbGatewayIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a part of FsDhcpSnpBindingEntry. The table
contains IP address of Gateways allowed for the host.
The host will be allowed to contact only these Gateways."
::= { fsIpDbBindings 2 }
fsIpDbGatewayIpEntry OBJECT-TYPE
SYNTAX FsIpDbGatewayIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains an IP address of Gateway allowed for
the host."
INDEX {
fsIpDbHostMac,
fsIpDbHostVlanId,
fsIpDbGatewayNetwork,
fsIpDbGatewayNetMask,
fsIpDbGatewayIp
}
::= { fsIpDbGatewayIpTable 1 }
FsIpDbGatewayIpEntry ::= SEQUENCE {
fsIpDbGatewayNetwork IpAddress,
fsIpDbGatewayNetMask IpAddress,
fsIpDbGatewayIp IpAddress,
fsIpDbGatewayIpMode INTEGER
}
fsIpDbGatewayNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network IP address of the gateway."
::= { fsIpDbGatewayIpEntry 1 }
fsIpDbGatewayNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask for the network to which the gateway is given."
::= { fsIpDbGatewayIpEntry 2 }
fsIpDbGatewayIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Gateway IP for the given network."
::= { fsIpDbGatewayIpEntry 3 }
fsIpDbGatewayIpMode OBJECT-TYPE
SYNTAX INTEGER { active (0) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Gateway IP verification mode while ARP
packet processing. "
::= { fsIpDbGatewayIpEntry 4 }
-- **************************** Interface Entry ******************************
fsIpDbInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpDbInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the interface (layer 2 VLAN) specific
informations."
::= { fsIpDbInterface 1 }
fsIpDbInterfaceEntry OBJECT-TYPE
SYNTAX FsIpDbInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry will contain statistics associated with the interface."
INDEX { fsIpDbIntfVlanId }
::= { fsIpDbInterfaceTable 1 }
FsIpDbInterfaceEntry ::= SEQUENCE {
fsIpDbIntfVlanId Integer32,
fsIpDbIntfNoOfVlanBindings Counter32,
fsIpDbIntfNoOfVlanStaticBindings Counter32,
fsIpDbIntfNoOfVlanDHCPBindings Counter32,
fsIpDbIntfNoOfVlanPPPBindings Counter32
}
fsIpDbIntfVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan ID of the VLAN to which this table-entry is associated."
::= { fsIpDbInterfaceEntry 1 }
fsIpDbIntfNoOfVlanBindings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the total number of (host, IP) bindings for
a given VLAN at a given time."
::= { fsIpDbInterfaceEntry 2 }
fsIpDbIntfNoOfVlanStaticBindings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the total number of static (host, IP) bindings
for a VLAN at a given time. "
::= { fsIpDbInterfaceEntry 3 }
fsIpDbIntfNoOfVlanDHCPBindings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the total number of (host, IP) bindings
configured through DHCP for a VLAN at a given time. "
::= { fsIpDbInterfaceEntry 4 }
fsIpDbIntfNoOfVlanPPPBindings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the total number of (host, IP) bindings
configured through PPP for a VLAN at a given time. "
::= { fsIpDbInterfaceEntry 5 }
-- ======================================================
-- IP source guard table
-- ======================================================
fsIpDbSrcGuardConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsIpDbSrcGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table provides the objects to enable or disable
IP source guard on each non routed Layer 2 interfaces.
When DHCP Snooping is enabled at an interface, a list of
IP addresses is obtained through DHCP snooping for this
particular interface and these list of IP address are
maintained in IP binding database along with the MAC,
VLAN ID and interface index. This database can be populated
using static configuration also.
If IP source guard is enabled, incoming IP traffic on an
interface are allowed when there is a matching entry in IP
binding database. Else, all incoming IP traffic on an
interface are allowed irrespective of the IP binding database."
::= { fsIpDbSrcGuard 1 }
fsIpDbSrcGuardConfigEntry OBJECT-TYPE
SYNTAX FsIpDbSrcGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each row instance contains the configuration to enable
or disable IP source guard on a physical interface. "
INDEX { fsIpDbSrcGuardIndex }
::= { fsIpDbSrcGuardConfigTable 1 }
FsIpDbSrcGuardConfigEntry ::= SEQUENCE {
fsIpDbSrcGuardIndex InterfaceIndex,
fsIpDbSrcGuardStatus INTEGER
}
fsIpDbSrcGuardIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the interface identifier for which the IP source
guard configuration is applied."
::= { fsIpDbSrcGuardConfigEntry 1 }
fsIpDbSrcGuardStatus OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
ip (2),
ipMac (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the IP source guard status of an
interface.
If this object is set to 'disable', IP source guard feature
is disabled and all incoming IP traffic on this interface
will be allowed.
If this object is set to 'ip', IP source guard feature is
enabled on fsIpDbSrcGuardIndex with Source IP address filtering
mode. The switch allows the IP traffic when the source IP
matches with an entry in Ip binding database.
If this object is set to 'ipMac', IP source guard is enabled on
the fsIpDbSrcGuardIndex with Source IP and MAC address filtering
mode. The switch allows the IP traffic when the source IP and MAC
address matches with an entry in Ip binding database.
When there is no IP binding entries and IP source guard is
enabled, switch drops all types of packets other than DHCP
packet. "
DEFVAL { disable }
::= { fsIpDbSrcGuardConfigEntry 2 }
END