1235 lines
50 KiB
Plaintext
1235 lines
50 KiB
Plaintext
-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
|
|
|
|
-- $Id: fsdh6s.mib,v 1.9 2012/09/07 09:52:05 siva Exp $
|
|
|
|
SUPERMICRO-DHCPv6-SERVER-MIB DEFINITIONS ::= BEGIN
|
|
-- ******************************************************************
|
|
-- RFC-3736 Stateless DHCPv6 Server MIB
|
|
-- ******************************************************************
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE,
|
|
Counter32, enterprises,
|
|
Unsigned32, Integer32 FROM SNMPv2-SMI
|
|
DisplayString, TruthValue,
|
|
RowStatus,TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
;
|
|
fsdhcpv6srv MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "Super Micro Computer Inc."
|
|
CONTACT-INFO "support@Supermicro.com"
|
|
DESCRIPTION
|
|
"This MIB is a proprietary MIB for Stateless-DHCPv6 server
|
|
and conforms to RFC 3736(04/2004)."
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION
|
|
"This MIB is a proprietary MIB for Stateless-DHCPv6 server
|
|
and conforms to RFC 3736(04/2004)."
|
|
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(2) 42 }
|
|
-- ******************************************************************
|
|
-- Groups in the Stateless DHCPv6 Server MIB Module
|
|
-- ******************************************************************
|
|
|
|
fsDhcp6SrvNotify OBJECT IDENTIFIER ::= { fsdhcpv6srv 0 }
|
|
fsDhcp6SrvSystem OBJECT IDENTIFIER ::= { fsdhcpv6srv 1 }
|
|
fsDhcp6SrvConfig OBJECT IDENTIFIER ::= { fsdhcpv6srv 2 }
|
|
|
|
-- ******************************************************************
|
|
-- Textual conventions
|
|
-- ******************************************************************
|
|
FsDhcp6SrvDuidValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each DHCP server has a unique DUID. DHCP servers use DUIDs to identify
|
|
clients for the selection of configuration parameters and in the
|
|
association of IAs with clients. DHCP clients use DUIDs to Identify
|
|
a server in messages where a server needs to be identified.
|
|
Servers MUST treat DUIDs as opaque values and MUST only compare DUIDs
|
|
for equality Clients and servers MUST NOT in any Other way interpret
|
|
DUIDs. The DUID is carried in an option because it may be variable length
|
|
and because it is not required in all DHCP messages. The DUID is
|
|
designed to be unique across all DHCP clients and servers, and stable
|
|
for any specific client or server - that is, the DUID used by a client
|
|
or server SHOULD NOT change over time if at all possible; for example,
|
|
a device's DUID should not change as a result of a change in
|
|
the device's network hardware.
|
|
The motivation for having more than one type of DUID is that the DUID
|
|
must be globally unique, and must also be easy to generate. The sort of
|
|
globally-unique identifier that is easy to generate for any given device
|
|
can differ quite widely. Also, some devices may not contain any
|
|
persistent storage. Retaining a generated DUID in such a device is not
|
|
possible, so the DUID scheme must accommodate such devices. A DUID can be
|
|
no more than 128 octets"
|
|
REFERENCE
|
|
"Section 9. DHCP Unique Identifier (DUID) RFC 3315"
|
|
SYNTAX OCTET STRING (SIZE(1..128))
|
|
|
|
FsDhcp6SrvDuidType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DUID consists of a two-octet type code represented in network byte
|
|
order, followed by a variable number of octets that make up the
|
|
actual identifier. The following types are currently defined:
|
|
|
|
1 Link-layer address plus time
|
|
2 Vendor-assigned unique ID based on Enterprise Number
|
|
3 Link-layer address
|
|
|
|
DUID Based on Link-layer Address plus Time [DUID-LLT]
|
|
|
|
This type of DUID consists of a two octet type field containing the
|
|
value 1, a two octet hardware type code, four octets containing a
|
|
time value, followed by link-layer address of any one network
|
|
interface that is connected to the DHCP device at the time
|
|
that the DUID is generated. The time value is the time that the
|
|
DUID is generated represented in seconds since midnight
|
|
(UTC), January 1, 2000, modulo 2^32.
|
|
|
|
The following diagram illustrates the format of a DUID-LLT:
|
|
|
|
0 1 2 3
|
|
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| 1 | hardware type (16 bits) |
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| time (32 bits) |
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
. .
|
|
. link-layer address (variable length) .
|
|
. .
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
|
|
|
|
The choice of network interface can be completely arbitrary, as long
|
|
as that interface provides a globally unique link-layer address for
|
|
the link type, and the same DUID-LLT SHOULD be used in configuring
|
|
all network interfaces connected to the device, regardless of which
|
|
interface's link-layer address was used to generate the DUID-LLT.
|
|
|
|
Clients and servers using this type of DUID MUST store the
|
|
DUID-LLT in stable storage, and MUST continue to use this DUID-LLT even
|
|
if the network interface used to generate the DUID-LLT is removed.
|
|
Clients and servers that do not have any stable storage MUST NOT
|
|
use this type of DUID.
|
|
|
|
Clients and servers that use this DUID SHOULD attempt to configure
|
|
the time prior to generating the DUID, if that is possible, and MUST
|
|
use some sort of time source (for example, a real-time clock) in
|
|
generating the DUID, even if that time source could not be configured
|
|
prior to generating the DUID. The use of a time source makes it
|
|
unlikely that two identical DUID-LLTs will be generated if the
|
|
network interface is removed from the client and another client then
|
|
uses the same network interface to generate a DUID-LLT. A collision
|
|
between two DUID-LLTs is very unlikely even if the clocks have not
|
|
been configured prior to generating the DUID.
|
|
|
|
This method of DUID generation is recommended for all general purpose
|
|
computing devices such as desktop computers and laptop computers, and
|
|
also for devices such as printers, routers, and so on, that contain
|
|
some form of writable non-volatile storage.
|
|
|
|
DUID Assigned by Vendor Based on Enterprise Number [DUID-EN]
|
|
|
|
This form of DUID is assigned by the vendor to the device. It
|
|
consists of the vendor's registered Private Enterprise Number as
|
|
maintained by IANA [6] followed by a unique identifier assigned by
|
|
the vendor.
|
|
|
|
The following diagram summarizes the structure of a DUID-EN:
|
|
|
|
0 1 2 3
|
|
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| 2 | enterprise-number |
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| enterprise-number (contd) | |
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
|
|
. identifier .
|
|
. (variable length) .
|
|
. .
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
|
|
The source of the identifier is left up to the vendor defining it,
|
|
but each identifier part of each DUID-EN MUST be unique to the
|
|
device that is using it, and MUST be assigned to the device at the time
|
|
it is manufactured and stored in some form of non-volatile
|
|
storage. The generated DUID SHOULD be recorded in non-erasable storage.
|
|
|
|
DUID Based on Link-layer Address [DUID-LL]:-
|
|
|
|
This type of DUID consists of two octets containing the DUID type 3,
|
|
a two octet network hardware type code, followed by the link-layer
|
|
address of any one network interface that is permanently connected to
|
|
the client or server device.
|
|
|
|
The following diagram illustrates the format of a DUID-LL:
|
|
|
|
0 1 2 3
|
|
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
| 3 | hardware type (16 bits) |
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
. .
|
|
. link-layer address (variable length) .
|
|
. .
|
|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
|
|
The choice of network interface can be completely arbitrary, as long
|
|
as that interface provides a unique link-layer address and is
|
|
permanently attached to the device on which the DUID-LL is being
|
|
generated. The same DUID-LL SHOULD be used in configuring all
|
|
network interfaces connected to the device, regardless of which
|
|
interface's link-layer address was used to generate the DUID.
|
|
|
|
DUID-LL is recommended for devices that have a permanently-connected
|
|
network interface with a link-layer address, and do not have
|
|
nonvolatile, writable stable storage. DUID-LL MUST NOT be used by
|
|
DHCP clients or servers that cannot tell whether or not a network
|
|
interface is permanently attached to the device on which the DHCP
|
|
client is running."
|
|
REFERENCE
|
|
"Section 9. DHCP Unique Identifier (DUID) RFC 3315"
|
|
SYNTAX INTEGER {
|
|
dtLlt (1),
|
|
dtEn (2),
|
|
dtLl (3)
|
|
}
|
|
-- ******************************************************************
|
|
-- Start the Scalars definition
|
|
-- ******************************************************************
|
|
fsDhcp6SrvDebugTrace OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object stores the trace option string input given by the user.
|
|
Based on the input to this object, trace statements corresponding
|
|
to the given options are displayed. To enable particular trace the
|
|
user has to enter the corresponding string(given below) assigned
|
|
for that. For enabling more than one traces the user has to enter
|
|
the corresponding strings with SPACE (delimiter) between each string.
|
|
For example,
|
|
To enable the below traces:
|
|
- Init and Shutdown traces
|
|
- Management traces
|
|
- Data path traces
|
|
- Control plane traces and
|
|
- Packet Dump traces
|
|
The input should be fed as follows:
|
|
enable init-shut mgmt data ctrl pkt-dump
|
|
To disable the below traces:
|
|
- Init and Shutdown traces
|
|
- Data path traces
|
|
- Control plane traces
|
|
The input should be,
|
|
disable init-shut data ctrl
|
|
The entered input string is parsed to get the trace options.
|
|
enable - Enables the corresponding option.
|
|
disable - Disables the corresponding option.
|
|
init-shut - Init and Shutdown traces
|
|
mgmt - Management traces
|
|
ctrl - Control Plane traces
|
|
pkt-dump - Packet Dump traces
|
|
resource - Traces related to all
|
|
resources except buffers
|
|
all-fail - All Failure traces
|
|
buffer - Buffer allocation/
|
|
release traces
|
|
critical - Sl-DHCPv6 Server Critical traces"
|
|
|
|
DEFVAL { "critical" }
|
|
::= { fsDhcp6SrvSystem 1 }
|
|
|
|
fsDhcp6SrvRealmTableNextIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an unused value for fsDhcp6SrvRealmIndex in
|
|
the fsDhcp6SrvRealmTable, or a zero to indicate that next index
|
|
does not exists. This object will give the first empty index value for
|
|
example when user create the four rows of fsDhcp6SrvRealmTable
|
|
with index 2,5,6,8. Then GET operation of fsDhcp6SrvRealmTableNextIndex
|
|
object will return the value 1 as next unused Index."
|
|
::= { fsDhcp6SrvSystem 2 }
|
|
|
|
fsDhcp6SrvClientTableNextIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an unused value for fsDhcp6SrvClientIndex in
|
|
the fsDhcp6SrvClientTable, or a zero to indicate that next index
|
|
does not exists. This object will give the first empty index value for
|
|
example when user create the four rows of fsDhcp6SrvClientTable
|
|
with index 2,5,6,8. Then GET operation of fsDhcp6SrvClientTableNextIndex
|
|
object will return the value 1 as next unused Index."
|
|
::= { fsDhcp6SrvSystem 3 }
|
|
|
|
fsDhcp6SrvPoolTableNextIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an first unused value for fsDhcp6SrvPoolIndex in
|
|
the fsDhcp6SrvPoolTableTable, or a zero to indicate that next index
|
|
does not exists. This object will give the first empty index value for
|
|
example when user create the four rows of fsDhcp6SrvPoolTable
|
|
with index 2,5,6,8.Then fsDhcp6SrvPoolTableNextIndex object will
|
|
return the value 1 as next unused Index."
|
|
::= { fsDhcp6SrvSystem 4 }
|
|
|
|
fsDhcp6SrvIncludePrefixTableNextIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an first unused value for fsDhcp6SrvIncludePrefixIndex in
|
|
the fsDhcp6SrvIncludePrefixTable, or a zero to indicate that next index
|
|
does not exists. This object will give the first empty index value for
|
|
example when user create the four rows of fsDhcp6SrvIncludePrefixTable
|
|
with index 2,5,6,8.Then fsDhcp6SrvIncludePrefixTableNextIndex object will
|
|
return the value 1 as next unused Index."
|
|
::= { fsDhcp6SrvSystem 5 }
|
|
|
|
fsDhcp6SrvTrapAdminControl OBJECT-TYPE
|
|
SYNTAX BITS{
|
|
none(0),
|
|
trapUnknownTlv(1),
|
|
trapInvalidPacketIn(2),
|
|
trapHmacAuthFail(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Object is used to enable or disable the transmission of
|
|
TRAP notification messages. A vector of Boolean notification types,
|
|
used to enable or disable the server notification types:
|
|
none (0)
|
|
trapUnknownTlv(1)
|
|
trapInvalidPacketIn(2)
|
|
trapHmacAuthFail(3)
|
|
|
|
when server declares the received message contains the unknown TLV then
|
|
the SNMP trap notification will come only when bit 1 of
|
|
fsDhcp6SrvTrapAdminControl is set.
|
|
when server declares the received message as invalid then
|
|
the SNMP trap notification will come only when bit 2 of fsDhcp6SrvTrapAdminControl
|
|
is set.
|
|
When server declares the received message is unauthenticated then
|
|
the SNMP trap notification will come only when bit 3 fsDhcp6SrvTrapAdminControl
|
|
is set.
|
|
"
|
|
DEFVAL { "\0" }
|
|
::= { fsDhcp6SrvSystem 6 }
|
|
|
|
fsDhcp6SrvSysLogAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object is used to enable or disable the transmission of
|
|
syslog notification messages.
|
|
DHCPv6 server will generate the syslog messages only when
|
|
fsDhcp6SrvSysLogAdminStatus is set as enabled (1).
|
|
|
|
disabled (2) means that DHCP server will not generate any
|
|
syslog messages."
|
|
DEFVAL { disabled }
|
|
::= { fsDhcp6SrvSystem 7 }
|
|
|
|
fsDhcp6SrvListenPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object contains the UDP listen Port Number.
|
|
Server process the received information request message
|
|
and relay-forward only when destination port number in
|
|
UDP Header is equal to configured
|
|
fsDhcp6SrvListenPort value."
|
|
DEFVAL { 547 }
|
|
::= { fsDhcp6SrvSystem 8 }
|
|
|
|
fsDhcp6SrvClientTransmitPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object contains the UDP transmit port number.
|
|
Server sets this as the destination Port Number in UDP
|
|
header of reply message. Default value of source Port
|
|
Number is 546."
|
|
DEFVAL { 546 }
|
|
::= { fsDhcp6SrvSystem 9 }
|
|
|
|
fsDhcp6SrvRelayTransmitPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object contains the UDP transmit port number.
|
|
Server sets this as the destination Port Number in UDP
|
|
header of relay-reply message. Default value of source Port
|
|
Number is 547."
|
|
DEFVAL { 547 }
|
|
::= { fsDhcp6SrvSystem 10 }
|
|
|
|
-- ******************************************************************
|
|
-- End the Scalars defination
|
|
-- ******************************************************************
|
|
|
|
-- ******************************************************************
|
|
-- Start the Configuration Pool Table (fsDhcp6SrvPoolTable)
|
|
-- ******************************************************************
|
|
|
|
fsDhcp6SrvPoolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDhcp6SrvPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Configuration Pool Table. Each row in the table represents a
|
|
different Configured Pool. The DHCPv6 server can provide those configuration
|
|
parameters that do not require the server to maintain any dynamic state for
|
|
individual clients, such as DNS server addresses and domain search list
|
|
options.
|
|
|
|
A DHCPv6 configuration information pool is a named entity that includes
|
|
information about available configuration parameters and policies that control
|
|
assignment of the parameters to clients from the pool. A pool is configured
|
|
independently of the DHCPv6 service.
|
|
|
|
Each Row of the fsDhcp6SrvOptionTable contains the configuration
|
|
information configured by user.
|
|
Rows of the fsDhcp6SrvOptionTable are mapped using fsDhcp6SrvPoolIndex.
|
|
|
|
Each configuration pool Row can be mapped to either Interface table or the
|
|
client table."
|
|
::= { fsDhcp6SrvConfig 1 }
|
|
|
|
fsDhcp6SrvPoolEntry OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Configuration Pool table entry. This entry is not lost
|
|
upon reboot. It is backed up by stable storage. Each entry in this table
|
|
contains the required attribute values which define the Configuration
|
|
Pool Entry."
|
|
INDEX { fsDhcp6SrvPoolIndex }
|
|
::= { fsDhcp6SrvPoolTable 1 }
|
|
|
|
FsDhcp6SrvPoolEntry ::= SEQUENCE {
|
|
fsDhcp6SrvPoolIndex Unsigned32,
|
|
fsDhcp6SrvPoolName DisplayString,
|
|
fsDhcp6SrvPoolPreference Integer32,
|
|
fsDhcp6SrvPoolDuidType FsDhcp6SrvDuidType,
|
|
fsDhcp6SrvPoolDuid FsDhcp6SrvDuidValue,
|
|
fsDhcp6SrvPoolDuidIfIndex Integer32,
|
|
fsDhcp6SrvPoolOptionTableNextIndex Unsigned32,
|
|
fsDhcp6SrvPoolRowStatus RowStatus
|
|
}
|
|
|
|
fsDhcp6SrvPoolIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier Index for the Configuration Pool Table .This is also
|
|
the index of the fsDhcp6SrvOptionTable Table."
|
|
::= { fsDhcp6SrvPoolEntry 1 }
|
|
|
|
fsDhcp6SrvPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the Configuration pool name .The format pool name
|
|
is string of maximum 32 characters. This name must be unique and NULL
|
|
terminated string."
|
|
::= { fsDhcp6SrvPoolEntry 2 }
|
|
|
|
fsDhcp6SrvPoolPreference OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the preference value of the pool.
|
|
This value is used by client to select the best information when it
|
|
receives multiple reply messages from different servers. The default
|
|
value is zero means lowest Preference pool."
|
|
DEFVAL { 0 }
|
|
::= { fsDhcp6SrvPoolEntry 3 }
|
|
|
|
fsDhcp6SrvPoolDuidType OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvDuidType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object contains the type of DUID.
|
|
Server always sends the Server Identifier TLV in the reply message.
|
|
The value dtLlt(1) indicates that DHCP server will use the Link layer address
|
|
of the interface and current system time value for the Server Identifier
|
|
option TLV value.
|
|
The value dtEn (2) indicates that DHCP server will use the Vendor-assigned
|
|
unique ID based on Enterprise Number for the Server Identifier
|
|
option TLV value.
|
|
The value dtLl (3) indicates that DHCP server will use the link layer address
|
|
for the Server Identifier option TLV value."
|
|
DEFVAL { dtLlt }
|
|
::= { fsDhcp6SrvPoolEntry 4 }
|
|
|
|
fsDhcp6SrvPoolDuid OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvDuidValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object contains the value of DUID used as server ID. Depending upon
|
|
the fsDhcp6SrvPoolDuidType this will return the current value of the
|
|
server identifier."
|
|
::= { fsDhcp6SrvPoolEntry 5 }
|
|
|
|
fsDhcp6SrvPoolDuidIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface which will be used for formation of DUID Based on
|
|
Link-layer Address plus Time and DUID based on Link-layer
|
|
Address, if not specified then an arbitrary interface value
|
|
will be used."
|
|
DEFVAL { 1 }
|
|
::= { fsDhcp6SrvPoolEntry 6 }
|
|
|
|
fsDhcp6SrvPoolOptionTableNextIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an first unused value for fsDhcp6SrvOptionIndex in
|
|
the fsDhcp6SrvOptionTable or a zero value to indicate that next index
|
|
does not exists. This object will give the first empty index value for
|
|
example when user create the four rows of fsDhcp6SrvOptionTable with index
|
|
1.2,1.5,1.6,1.8.Then fsDhcp6SrvOptionIndex object will return the value
|
|
1 as first unused Index."
|
|
::= { fsDhcp6SrvPoolEntry 7 }
|
|
|
|
fsDhcp6SrvPoolRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the status of the row.
|
|
The writable columns in a row can not be changed if the row
|
|
is active. All fsDhcp6SrvPoolName column must have a valid
|
|
value before a row can be activated.
|
|
"
|
|
::= { fsDhcp6SrvPoolEntry 8 }
|
|
|
|
-- ******************************************************************
|
|
-- End of Configuration Pool Table (fsDhcp6SrvPoolTable)
|
|
-- ******************************************************************
|
|
|
|
-- ******************************************************************
|
|
-- Start of Include link prefix Table {fsDhcp6SrvIncludePrefixTable)
|
|
-- ******************************************************************
|
|
fsDhcp6SrvIncludePrefixTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDhcp6IncludePrefixEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the list of link prefixes which are to be used by
|
|
the server to map an information-request/relay-forward message to a pool.
|
|
|
|
When an address on the incoming interface or a link-address in the
|
|
packet matches the specified IPv6-prefix, the server uses the
|
|
configuration information pool."
|
|
::= { fsDhcp6SrvConfig 2 }
|
|
|
|
fsDhcp6SrvIncludePrefixEntry OBJECT-TYPE
|
|
SYNTAX FsDhcp6IncludePrefixEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The include prefix Table entry. This entry is not lost upon reboot.
|
|
It is backed up by stable storage. Each entry in this table
|
|
contains the required attribute values."
|
|
INDEX { fsDhcp6SrvIncludePrefixContextId, fsDhcp6SrvIncludePrefixIndex }
|
|
::= { fsDhcp6SrvIncludePrefixTable 1 }
|
|
|
|
FsDhcp6IncludePrefixEntry ::= SEQUENCE {
|
|
fsDhcp6SrvIncludePrefixContextId Integer32,
|
|
fsDhcp6SrvIncludePrefixIndex Integer32,
|
|
fsDhcp6SrvIncludePrefix OCTET STRING,
|
|
fsDhcp6SrvIncludePrefixPool Integer32,
|
|
fsDhcp6SrvIncludePrefixRowStatus RowStatus
|
|
}
|
|
|
|
fsDhcp6SrvIncludePrefixContextId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit unique context id for each entry. Minimum value is 0
|
|
and Maximum depends upon system configuration. Default value
|
|
is 0 which will be initialized during bootup"
|
|
::= { fsDhcp6SrvIncludePrefixEntry 1 }
|
|
|
|
fsDhcp6SrvIncludePrefixIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier Index for the IPv6 prefix Table."
|
|
::= { fsDhcp6SrvIncludePrefixEntry 2 }
|
|
|
|
fsDhcp6SrvIncludePrefix OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the IPv6 prefix to which the configuration pool
|
|
has to be mapped."
|
|
::= { fsDhcp6SrvIncludePrefixEntry 3 }
|
|
|
|
fsDhcp6SrvIncludePrefixPool OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the unique Pool Index value mapped to this
|
|
IPv6 Prefix.
|
|
Server will send the configuration information associated with
|
|
the related pool in reply message for all the information-request
|
|
messages received with this particular IPv6 address prefix."
|
|
::= { fsDhcp6SrvIncludePrefixEntry 4 }
|
|
|
|
fsDhcp6SrvIncludePrefixRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the status of the row Object, only creatAndGo and
|
|
destroy values are applicable for this object."
|
|
::= { fsDhcp6SrvIncludePrefixEntry 5 }
|
|
|
|
-- ******************************************************************
|
|
-- End of Include link prefix Table {fsDhcp6SrvIncludePrefixTable)
|
|
-- ******************************************************************
|
|
|
|
-- ******************************************************************
|
|
-- Start of Global Option Table {fsDhcp6SrvOptionTable)
|
|
-- ******************************************************************
|
|
fsDhcp6SrvOptionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDhcp6SrvOptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the global options that are
|
|
to be used by the server to respond to a DHCP
|
|
information-request message.
|
|
Following are valid options user can configure:-
|
|
1 Vendor-specific Information with type fsDhcp6SrvOptionType 17
|
|
2 SIP server domain name list with type fsDhcp6SrvOptionType 21
|
|
3 SIP server IPV6 address list with type fsDhcp6SrvOptionType 22
|
|
4 DNS recursive name server with type fsDhcp6SrvOptionType 23
|
|
5 Domain search list with type fsDhcp6SrvOptionType 24
|
|
6 Information refresh timer fsDhcp6SrvOptionType 32
|
|
option table row can not be created until row status of pool table with
|
|
same fsDhcp6SrvPoolIndex becomes active.
|
|
|
|
Row status with ffsDhcp6SrvPoolIndex becomes not in service when row
|
|
status of fsDhcp6SrvPoolTable with the same index becomes
|
|
Not in service."
|
|
::= { fsDhcp6SrvConfig 3 }
|
|
|
|
fsDhcp6SrvOptionEntry OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvOptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Server Option Table entry. This entry is not lost upon reboot.
|
|
It is backed up by stable storage. Each entry in this table
|
|
contains the required attribute values."
|
|
INDEX { fsDhcp6SrvPoolIndex, fsDhcp6SrvOptionIndex}
|
|
::= { fsDhcp6SrvOptionTable 1 }
|
|
|
|
FsDhcp6SrvOptionEntry ::= SEQUENCE {
|
|
fsDhcp6SrvOptionIndex Unsigned32,
|
|
fsDhcp6SrvOptionType Integer32,
|
|
fsDhcp6SrvOptionLength Integer32,
|
|
fsDhcp6SrvOptionValue OCTET STRING,
|
|
fsDhcp6SrvOptionPreference Integer32,
|
|
fsDhcp6SrvOptionRowStatus RowStatus
|
|
}
|
|
|
|
fsDhcp6SrvOptionIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the unique Option Index value mapped to this option
|
|
Table. "
|
|
::= { fsDhcp6SrvOptionEntry 1}
|
|
|
|
fsDhcp6SrvOptionType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifies the option, this is the tag octet of the DHCP
|
|
option.
|
|
"
|
|
::= { fsDhcp6SrvOptionEntry 2}
|
|
|
|
fsDhcp6SrvOptionLength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the length of the option
|
|
indicated by the option type. This length does not
|
|
include the octets specifying the type and length."
|
|
::= { fsDhcp6SrvOptionEntry 3}
|
|
|
|
fsDhcp6SrvOptionValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the octets of data, of length
|
|
specified by fsDhcp6SrvOptionLength for that entry.
|
|
"
|
|
::= { fsDhcp6SrvOptionEntry 4}
|
|
|
|
fsDhcp6SrvOptionPreference OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the preference value of the Option.
|
|
This preference value is used by server while adding multiple
|
|
options in the Reply message, higher preference option TLV will be go
|
|
first in reply message. Lower the number lower the preference value.
|
|
The default value is zero which means lowest preference.
|
|
For example three Option TLVs are configured with preference option
|
|
value 4,8 and 9 respectively then server will send the reply message
|
|
with Option TLV having preference value 9 then 8 and then 4."
|
|
DEFVAL { 0 }
|
|
::= { fsDhcp6SrvOptionEntry 5 }
|
|
|
|
fsDhcp6SrvOptionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Row status of this entry. The
|
|
writable columns in a row can not be changed if the row
|
|
is active."
|
|
::= { fsDhcp6SrvOptionEntry 6}
|
|
|
|
-- ******************************************************************
|
|
-- End of Global Option Table {fsDhcp6SrvOptionTable)
|
|
-- ******************************************************************
|
|
|
|
-- ******************************************************************
|
|
-- Start of Server SubOption Table {fsDhcp6SrvSubOptionTable)
|
|
-- ******************************************************************
|
|
fsDhcp6SrvSubOptionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDhcp6SrvSubOptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the vendor specific options which the server
|
|
will reply in response to a information-request or relay-forward
|
|
message.
|
|
This table will contain the various sub-option associated with
|
|
a specific option"
|
|
::= { fsDhcp6SrvConfig 4 }
|
|
|
|
fsDhcp6SrvSubOptionEntry OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvSubOptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SubOption Table entry. This entry is not lost upon reboot.
|
|
It is backed up by stable storage. Each entry in this table
|
|
contains the required attribute values."
|
|
INDEX { fsDhcp6SrvPoolIndex, fsDhcp6SrvOptionIndex,
|
|
fsDhcp6SrvSubOptionType}
|
|
::= { fsDhcp6SrvSubOptionTable 1 }
|
|
|
|
FsDhcp6SrvSubOptionEntry ::= SEQUENCE {
|
|
fsDhcp6SrvSubOptionType Unsigned32,
|
|
fsDhcp6SrvSubOptionLength Integer32,
|
|
fsDhcp6SrvSubOptionValue OCTET STRING,
|
|
fsDhcp6SrvSubOptionRowStatus RowStatus
|
|
}
|
|
fsDhcp6SrvSubOptionType OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the unique sub-option type."
|
|
::= { fsDhcp6SrvSubOptionEntry 1}
|
|
|
|
fsDhcp6SrvSubOptionLength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the length of the option indicated
|
|
by the sub-option type. This length does not include the
|
|
octets specifying the type and length."
|
|
::= { fsDhcp6SrvSubOptionEntry 2}
|
|
|
|
fsDhcp6SrvSubOptionValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the octets of data, of length
|
|
specified by fsDhcp6SrvSubOptionLength for that entry.
|
|
"
|
|
::= { fsDhcp6SrvSubOptionEntry 3}
|
|
|
|
fsDhcp6SrvSubOptionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Row status of this entry. The
|
|
writable columns in a row can not be changed if the row
|
|
is active."
|
|
::= { fsDhcp6SrvSubOptionEntry 4}
|
|
|
|
-- ******************************************************************
|
|
-- End of Server SubOption Table {fsDhcp6SrvSubOptionTable)
|
|
-- ******************************************************************
|
|
-- ******************************************************************
|
|
-- Start of Client Table {fsDhcp6SrvClientTable)
|
|
-- ******************************************************************
|
|
fsDhcp6SrvClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDhcp6SrvClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The server and client have a shared key. When one wants to send a
|
|
message to another, the source creates a digest value by using the
|
|
shared key and the message contents as inputs to a keyed hashing
|
|
function (MD5 by default). The source then includes the digest value in
|
|
the authentication option. When the message arrives at the destination,
|
|
the destination searches for the shared key and generates the digest
|
|
value itself. If the digest value in the authentication option of the
|
|
message matches the digest value generated by the destination, then the
|
|
message is secure and comes from a trusted source.
|
|
|
|
This table is used to define containers for keys to be used for a
|
|
single client."
|
|
::= { fsDhcp6SrvConfig 7 }
|
|
|
|
fsDhcp6SrvClientEntry OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Entries of the fsDhcp6SrvClientTable used to authenticate the
|
|
received information-request message."
|
|
INDEX {fsDhcp6SrvClientIndex}
|
|
::= { fsDhcp6SrvClientTable 1 }
|
|
|
|
FsDhcp6SrvClientEntry ::= SEQUENCE {
|
|
fsDhcp6SrvClientIndex Unsigned32,
|
|
fsDhcp6SrvClientId FsDhcp6SrvDuidValue,
|
|
fsDhcp6SrvClientIdType FsDhcp6SrvDuidType,
|
|
fsDhcp6SrvClientRealm Unsigned32,
|
|
fsDhcp6SrvClientRowStatus RowStatus
|
|
}
|
|
|
|
fsDhcp6SrvClientIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Index of the server client table."
|
|
::= { fsDhcp6SrvClientEntry 1}
|
|
|
|
fsDhcp6SrvClientId OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvDuidValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Objects contains the client DUID value. "
|
|
::= { fsDhcp6SrvClientEntry 2}
|
|
|
|
fsDhcp6SrvClientIdType OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvDuidType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object contains type of client DUID."
|
|
DEFVAL { dtLlt }
|
|
::= { fsDhcp6SrvClientEntry 3}
|
|
|
|
fsDhcp6SrvClientRealm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object contains the index of the associated realm table row."
|
|
::= { fsDhcp6SrvClientEntry 4}
|
|
|
|
fsDhcp6SrvClientRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Row status of this entry. The
|
|
writable columns in a row can not be changed if the row
|
|
is active."
|
|
::= { fsDhcp6SrvClientEntry 5}
|
|
|
|
-- ******************************************************************
|
|
-- End of Client Table {fsDhcp6SrvClientTable)
|
|
-- ******************************************************************
|
|
-- ******************************************************************
|
|
-- Start of Realm Table {fsDhcp6SrvRealmTable)
|
|
-- ******************************************************************
|
|
|
|
fsDhcp6SrvRealmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDhcp6SrvRealmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Server authenticate the received information request with
|
|
HMAC MD5 algorithm when received message contains the
|
|
Authentication option tlv .Realms are container for
|
|
authentication information. For the Authentication key id is required.
|
|
Keys are assigned to clients. This table is used to create
|
|
the Realm Row and the fsDhcp6SrvRealmIndex index is also used
|
|
by the fsDhcp6SrvAuthClntTable. Following is an example
|
|
of a server authentication hierarchy:
|
|
|
|
realm testrealm01.private.com
|
|
{
|
|
key 1 TESTREALMKEY01
|
|
key 2 TESTREALMKEY02
|
|
}
|
|
realm testrealm02.private.com
|
|
{
|
|
key 1 TESTREALMKEY01
|
|
}"
|
|
::= { fsDhcp6SrvConfig 6 }
|
|
|
|
fsDhcp6SrvRealmEntry OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvRealmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Authentication Realm table entry."
|
|
INDEX { fsDhcp6SrvRealmIndex }
|
|
::= { fsDhcp6SrvRealmTable 1 }
|
|
|
|
FsDhcp6SrvRealmEntry ::= SEQUENCE {
|
|
fsDhcp6SrvRealmIndex Unsigned32,
|
|
fsDhcp6SrvRealmName OCTET STRING,
|
|
fsDhcp6SrvRealmKeyTableNextIndex Unsigned32,
|
|
fsDhcp6SrvRealmRowStatus RowStatus
|
|
}
|
|
|
|
fsDhcp6SrvRealmIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the Realm Authentication table."
|
|
::= { fsDhcp6SrvRealmEntry 1}
|
|
|
|
fsDhcp6SrvRealmName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the unique name of the container used to store the keys
|
|
for example testrealm01.private.com is the realm name described in
|
|
fsDhcp6SrvRealmTable"
|
|
::= { fsDhcp6SrvRealmEntry 2}
|
|
|
|
fsDhcp6SrvRealmKeyTableNextIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an unused value for fsDhcp6SrvKeyIndex in
|
|
the fsDhcp6SrvKeyTable, or a zero to indicate that next
|
|
index does not exists. This object will give the first empty
|
|
index value for example when user create the four rows of
|
|
fsDhcp6SrvKeyIndex with index 2,5,6,8.Then
|
|
fsDhcp6SrvRealmKeyTableNextIndex object will return the value
|
|
1 as next unused Index."
|
|
::= { fsDhcp6SrvRealmEntry 3}
|
|
|
|
fsDhcp6SrvRealmRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Row status of this entry. The
|
|
writable columns in a row can not be changed if the row
|
|
is active."
|
|
::= { fsDhcp6SrvRealmEntry 4}
|
|
|
|
-- ******************************************************************
|
|
-- End of Realm Table {fsDhcp6SrvRealmTable)
|
|
-- ******************************************************************
|
|
|
|
-- ******************************************************************
|
|
-- Start of Server Key Table {fsDhcp6SrvKeyTable)
|
|
-- ******************************************************************
|
|
|
|
fsDhcp6SrvKeyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDhcp6SrvKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to define the various keys used for authentication
|
|
the information-request."
|
|
::= { fsDhcp6SrvConfig 8 }
|
|
|
|
fsDhcp6SrvKeyEntry OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries of the fsDhcp6SrvKeyTable"
|
|
INDEX { fsDhcp6SrvRealmIndex,
|
|
fsDhcp6SrvKeyIdentifier}
|
|
::= { fsDhcp6SrvKeyTable 1 }
|
|
|
|
FsDhcp6SrvKeyEntry ::= SEQUENCE {
|
|
fsDhcp6SrvKeyIdentifier Unsigned32,
|
|
fsDhcp6SrvKey OCTET STRING,
|
|
fsDhcp6SrvKeyRowStatus RowStatus
|
|
}
|
|
|
|
fsDhcp6SrvKeyIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Index of the Aut key Table."
|
|
::= { fsDhcp6SrvKeyEntry 1}
|
|
|
|
fsDhcp6SrvKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the key string which will be used to authenticate
|
|
the information-request message."
|
|
::= { fsDhcp6SrvKeyEntry 2}
|
|
|
|
fsDhcp6SrvKeyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Row status of this entry. The
|
|
Row status can not be set active until Row Status of fsDhcp6SrvRealmEntry
|
|
with fsDhcp6SrvRealmIndex Index become active."
|
|
::= { fsDhcp6SrvKeyEntry 3}
|
|
|
|
-- ******************************************************************
|
|
-- End of Server Key Table {fsDhcp6SrvKeyTable)
|
|
-- ******************************************************************
|
|
-- ******************************************************************
|
|
-- Start of Server Interface Table {fsDhcp6SrvIfTable)
|
|
-- ******************************************************************
|
|
|
|
fsDhcp6SrvIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsDhcp6SrvIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the statistics of DHCPv6 Server on each
|
|
interface. It will give the Number of Information Request messages, Relay
|
|
Forward messages received on the interface and Number of Relay reply,
|
|
reply messages transmitted from the interface.
|
|
|
|
This table also contains the per interface configuration column
|
|
fsDhcp6SrvIfPool contains the pool id associated with the interface."
|
|
::= { fsDhcp6SrvConfig 5 }
|
|
|
|
fsDhcp6SrvIfEntry OBJECT-TYPE
|
|
SYNTAX FsDhcp6SrvIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries of the fsDhcp6SrvIfTable"
|
|
INDEX {fsDhcp6SrvIfIndex}
|
|
::= { fsDhcp6SrvIfTable 1 }
|
|
|
|
FsDhcp6SrvIfEntry ::= SEQUENCE {
|
|
fsDhcp6SrvIfIndex Integer32,
|
|
fsDhcp6SrvIfPool Integer32,
|
|
fsDhcp6SrvIfInformIn Counter32,
|
|
fsDhcp6SrvIfRelayForwIn Counter32,
|
|
fsDhcp6SrvIfReplyOut Counter32,
|
|
fsDhcp6SrvIfRelayReplyOut Counter32,
|
|
fsDhcp6SrvIfInvalidPktIn Counter32,
|
|
fsDhcp6SrvIfUnknownTlvType Integer32,
|
|
fsDhcp6SrvIfHmacFailCount Counter32,
|
|
fsDhcp6SrvIfCounterReset TruthValue,
|
|
fsDhcp6SrvIfRowStatus RowStatus
|
|
}
|
|
|
|
fsDhcp6SrvIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the unique index value mapped
|
|
to this IPv6 Interface."
|
|
::= { fsDhcp6SrvIfEntry 1 }
|
|
|
|
fsDhcp6SrvIfPool OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the unique Pool Index
|
|
value mapped to this Interface Table. Server will send the configuration
|
|
information associated with the fsDhcp6SrvIfPool in reply message for all
|
|
the information-request messages received in this particular interface."
|
|
::= { fsDhcp6SrvIfEntry 2 }
|
|
|
|
fsDhcp6SrvIfInformIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the number of INFORMATION REQUEST messages
|
|
received on the Interface."
|
|
::= { fsDhcp6SrvIfEntry 3 }
|
|
|
|
fsDhcp6SrvIfRelayForwIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the number of RELAY FORWARD messages
|
|
received on the Interface."
|
|
::= { fsDhcp6SrvIfEntry 4 }
|
|
|
|
fsDhcp6SrvIfReplyOut OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the number of REPLY messages
|
|
transmitted from the Interface."
|
|
::= { fsDhcp6SrvIfEntry 5 }
|
|
|
|
fsDhcp6SrvIfRelayReplyOut OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the number of RELAY REPLY messages
|
|
transmitted from the Interface."
|
|
::= { fsDhcp6SrvIfEntry 6 }
|
|
|
|
fsDhcp6SrvIfInvalidPktIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the number of Invalid messages
|
|
received on the Interface."
|
|
::= { fsDhcp6SrvIfEntry 7 }
|
|
|
|
fsDhcp6SrvIfUnknownTlvType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the Last unknown Type received in the INFORMATION
|
|
REQUEST or RELAY FORWARD message."
|
|
::= { fsDhcp6SrvIfEntry 8 }
|
|
|
|
fsDhcp6SrvIfHmacFailCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the number of unauthenticated messages received on the interface
|
|
This counter increment only when Authentication TLV is present in the received
|
|
message and Digest calculated by the realm and key id does not match with
|
|
received digest present in the Authentication TLV."
|
|
::= { fsDhcp6SrvIfEntry 9 }
|
|
|
|
fsDhcp6SrvIfCounterReset OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to reset all the statistics counter objects present
|
|
in this table. This will be done by setting the value of this column to
|
|
'true(1)'.
|
|
This column always reads back to 'false(2)'."
|
|
::= { fsDhcp6SrvIfEntry 10 }
|
|
|
|
fsDhcp6SrvIfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create/delete a row in the interface table.
|
|
when the interface is deleted from the system the corresponding
|
|
row from this table will also be deleted."
|
|
::= { fsDhcp6SrvIfEntry 11 }
|
|
|
|
-- ******************************************************************
|
|
-- End of Server Interface Table {fsDhcp6SrvIfTable)
|
|
-- ******************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- fsDhcp6SrvNotify sub tree
|
|
-- *****************************************************************************
|
|
|
|
fsDhcp6SrvUnknownTlvTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsDhcp6SrvIfUnknownTlvType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated when received Information Request or Relay
|
|
Forward Message contains the Invalid TLV type."
|
|
::= {fsDhcp6SrvNotify 1}
|
|
fsDhcp6SrvInvalidPacketTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsDhcp6SrvIfInvalidPktIn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated when received Information Request or Relay
|
|
Forward Message is Invalid."
|
|
::= {fsDhcp6SrvNotify 2}
|
|
fsDhcp6SrvHmacAuthenticationFailTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsDhcp6SrvIfHmacFailCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated when received information-request or relay
|
|
forward Message contains the authentication TLV and the Digest
|
|
calculated at the server side with the realm and key id value does not
|
|
match with received digest value."
|
|
::= {fsDhcp6SrvNotify 3}
|
|
|
|
END
|