WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/supermicro/SUPERMICRO-BGP-MIB

9712 lines
339 KiB
Plaintext
Raw Blame History

-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
-- /*****************************************************************
-- * *
-- * $Id: fsbgp4.mib,v 1.38 2013/09/02 14:02:34 siva Exp $ *
-- * fsbgp4.mib *
-- * *
-- * BGP4 Proprietary MIB. *
-- * *
-- ****************************************************************/
-- MIB FOR BGP
SUPERMICRO-BGP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,NOTIFICATION-TYPE,
IpAddress, Unsigned32, Integer32, enterprises, Gauge32, Counter32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue,
DateAndTime FROM SNMPv2-TC;
--InetAddressType FROM INET-ADDRESS-MIB;
-- futuresoftware OBJECT IDENTIFIER ::= {enterprises 2076}
fsbgp MODULE-IDENTITY
LAST-UPDATED "201209050000Z"
ORGANIZATION "Super Micro Computer Inc."
CONTACT-INFO "support@Supermicro.com"
DESCRIPTION
"The Proprietary BGP MIB"
REVISION "201209050000Z"
DESCRIPTION
"The Proprietary BGP MIB"
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 41 }
InetAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic Internet address.
An InetAddress value is always interpreted within the context
of an InetAddressType value. Every usage of the InetAddress
textual convention is required to specify the InetAddressType
object which provides the context. It is suggested that the
InetAddressType object is logically registered before the
object(s) which use the InetAddress textual convention if
they appear in the same logical row.
The value of an InetAddress object must always be
consistent with the value of the associated InetAddressType
object. Attempts to set an InetAddress object to a value
which is inconsistent with the associated InetAddressType
must fail with an inconsistentValue error."
SYNTAX OCTET STRING (SIZE(0 .. 40))
InetAddressType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents a type of Internet Address.
unknown (0) An unknown address type. This value MUST be used if the
value of the corresponding InetAddress object is a zero
length string. It may also used to indicate an IP address
which is not in one of the formats defined below.
ipv4 (1) An IPv4 address"
SYNTAX INTEGER {
unknown (0),
ipv4 (1),
ipv6 (2)
}
BgpSafi ::= TEXTUAL-CONVENTION
-- DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The representation of a BGP Safi"
SYNTAX INTEGER {
unknown (0),
unicast (1),
labelledIpv4 (4),
vpnv4 (128)
}
fsbgp4Scalars OBJECT IDENTIFIER ::= {fsbgp 1}
fsbgp4GlobalAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the BGP system. The BGP4 speaker is
functionally active only when the global admin status is up. The global
admin status can be made up only if the fsbgp4LocalAs is configured."
DEFVAL { down }
::= { fsbgp4Scalars 1 }
fsbgp4LocalAs OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local autonomous system number.This object can be set only if
fsbgp4GlobalAdminStatus is down."
DEFVAL { 0 }
::= { fsbgp4Scalars 2 }
fsbgp4Identifier OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the BGP Identifier of local system. If global
admin status is made up, by default the BGP Identifier will take
the value of highest interface address. If the BGP Speaker is
administratively active, then the BGP Identifier can be configured
explicitly. If configured explicitly,then this configured value will be
preserved even across BGP restarts. Inorder to restore the default value
for BGP Identifier configure this object as 0.0.0.0. Peering sessions
will be reset if the BGP Identifer is changed. This object can be set
only if fsbgp4LocalAs has been configured."
::= { fsbgp4Scalars 3 }
fsbgp4Synchronization OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Attribute to enable/disable synchronization within an AS.
This object can be set only if fsbgp4LocalAs has been configured."
DEFVAL { disable }
::= { fsbgp4Scalars 4 }
fsbgp4DefaultLocalPref OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 2147483647 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default value of local-pref that is to be sent in updates to internal
peers.This object can be set only if fsbgp4LocalAs has been configured."
DEFVAL { 100 }
::= { fsbgp4Scalars 5 }
fsbgp4AdvtNonBgpRt OBJECT-TYPE
SYNTAX INTEGER
{
external(1),
externalAndinternal(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This mib object can be used to configure the peer type to whom
non-bgp routes can be propagated.
external - indicates non-bgp routes can be exported to only
external peers.All types of non-bgp routes
can be propagated to external peers.
externalAndInternal - non-bgp routes can be propagated to both external
and internal peers.
This object can be set only if fsbgp4LocalAs has been configured."
DEFVAL { externalAndinternal }
::= { fsbgp4Scalars 6 }
fsbgp4TraceEnable OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be used to enable trace dynamically in BGP
module. A four byte integer value is specified for enabling
the level of tracing.Each Bit in the four byte integer variable
represents a level of Trace.
The bits represents the levels as follows:
0 - All Failures,
1 - All Resource Allocation failure,
2 - Init & Shutdown Trace,
3 - Management Trace,
4 - Control Path Trace,
5 - Data Path Trace,
6 - Peer Connection Trace,
7 - Update Message Trace,
8 - FDB Update Trace,
9 - Keep-Alive Trace,
10 - All Transmission Trace,
11 - All Reception Trace,
12 - Dampening Trace,
13 - Events Trace,
14 - High level Packet Dump
15 - Low level packet Dump
16 - Hex Dump
The remaining bits are unused.
The combination of levels are also allowed. For example if the bits 1
and 2 are set, then the Trace statements related to management and Data
Path will be printed.
The user have to enter the corresponding integer value for the bits set.
For example if bits 1 and 2 are set then value of 6 should be entered.
This object can be set only if fsbgp4LocalAs has been configured."
::= { fsbgp4Scalars 7 }
fsbgp4DebugEnable OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be used to enable debug dynamically in BGP module.
Its a four byte integer value specified for enabling the level
of debugging. Each Bit in the four byte integer variable
represents a level of debug. The combination of levels are also
allowed. This object can be set only if fsbgp4LocalAs is configured."
::= { fsbgp4Scalars 8 }
fsbgp4OverlappingRoute OBJECT-TYPE
SYNTAX INTEGER
{
moreSpecific(1),
lessSpecific(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the BGP speaker's policy for handling
the overlapping routes. When an overlapping route is received, depending
upon the configured policy either the less-specific routes or
more-specific routes or both routes are installed in the RIB tree. This
object can be set only if fsbgp4LocalAs has been configured and
fsbgp4GlobalAdminStatus is down."
DEFVAL { both }
::= { fsbgp4Scalars 9 }
fsbgp4MaxPeerEntry OBJECT-TYPE
SYNTAX Integer32 (0..50)
-- MaxPeerEntry (Range should be modified
-- according to the DEFVAL)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximum number of peers supported by BGP. This object can be set only
if fsbgp4LocalAs has been configured.
This object can not be set to a higher value than the initial value of the
object.However initial value can be changed in inc/system.size file"
DEFVAL { 50 }
::= { fsbgp4Scalars 10 }
fsbgp4MaxNoofRoutes OBJECT-TYPE
SYNTAX Integer32 (0..5000)
-- MaxNoofRoutes (Range should be modified
-- according to the DEFVAL )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It represents the maximum number of routes in the routing table. This
object can be set only if fsbgp4LocalAs has been configured.
This object can not be set to a higher value than the initial value of the
object.However initial value can be changed in inc/system.size file"
DEFVAL { 5000 }
::= { fsbgp4Scalars 11 }
fsbgp4AlwaysCompareMED OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to disable, then in best route decision process,
MED will be compared only between routes received from the same
autonomous system. If set to enable, irrespective of the autonomous
system from which the routes are received, MED comparision will be done.
This object can be set only if the fsbgp4LocalAs is set."
DEFVAL { disable }
::= { fsbgp4Scalars 12 }
fsbgp4DefaultOriginate OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to enable/disable the redistribution and
advertisement of the default route (0.0.0.0/0). By default, the
default routes are not redistributed into BGP. Only if this object
is set as enable, the default route gets redistributed and advertised
to BGP Peers. If the default route is neither present in IP FDB nor
received from any Peer, enabling this object will not result in
advertisement of default route. This object can be set only if the
fsbgp4LocalAs is set."
DEFVAL { disable }
::= { fsbgp4Scalars 13 }
fsbgp4DefaultIpv4UniCast OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to enable, and if a neighbor is created, then
the MP IPv4 Unicast Address Family Capability will be negotiate for
that peer. If this object is set as disable and if a neighbor is
created, then IPv4 unicast capability will not be negotiated for that
neighbor, unless IPv4 unicast capability is explicitly configured for
that neighbor. Changing the status of this object will not cause
any change in the MP IPV4 Unicast negotiation status of the already
existing peer. This object can be set only if fsbgp4LocalAs is
configured."
DEFVAL { enable }
::= { fsbgp4Scalars 14 }
fsbgp4GRAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable GR capability in BGP speaker."
DEFVAL { enable }
::= { fsbgp4Scalars 15 }
fsbgp4GRRestartTimeInterval OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the estimated time (in seconds) it will take for the BGP
session to be re-established after a restart. Suggested default value
should be less than or equal to Hold Time carried in open message.
The GR restart time when re-configured will be used only in the new
BGP sessions getting established and will not effect the already
established BGP sessions."
DEFVAL { 90 }
::= { fsbgp4Scalars 16 }
fsbgp4GRSelectionDeferralTimeInterval OBJECT-TYPE
SYNTAX Integer32 (60..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval is the upper bound on the amount of time a router
defers its route selection. The value of this timer should be large
enough, so as to provide all the peers of the Restarting Speaker with
enough time to send all the routes to the Restarting Speaker."
DEFVAL { 60 }
::= { fsbgp4Scalars 17 }
fsbgp4GRStaleTimeInterval OBJECT-TYPE
SYNTAX Integer32 (90..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This interval is the upper bound on the amount of time a router retains
the stale routes.
The GR stale time interval configured can be used only for the new peers
sessions established and not for the already established peer sessions"
DEFVAL { 150 }
::= { fsbgp4Scalars 18 }
fsbgp4GRMode OBJECT-TYPE
SYNTAX INTEGER {
restarting (1),
receiving (2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the BGP speaker is restarting speaker
or receiving speaker."
::= { fsbgp4Scalars 19 }
fsbgp4RestartSupport OBJECT-TYPE
SYNTAX INTEGER {
none (1),
plannedOnly (2),
plannedAndUnplanned (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's support for BGP graceful restart Options include:
no restart support, only planned restarts, or both planned and unplanned
restarts. This object is persistent and when written the entity SHOULD
save the change to non-volatile storage. When BGP GR admin status is
enabled, the restart option can be one of the following: only planned
restarts, or both planned and unplanned restarts."
DEFVAL { none }
::= { fsbgp4Scalars 20 }
fsbgp4RestartStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
plannedRestart (2),
unplannedRestart (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of BGP graceful restart, it indicates whether the speaker
restarted or not if it is restarted whether it is a planned restart or unplanned restart "
::= { fsbgp4Scalars 21 }
fsbgp4RestartExitReason OBJECT-TYPE
SYNTAX INTEGER {
none (1), -- none attempted
inProgress (2), -- restart in progress
completed (3), -- successfully completed
failure (4) -- restart failure.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at a graceful restart.
If the value is 'none': no restart has yet been attempted.
'inProgress': a restart attempt is currently underway.
'Completed': a restart is completed successfully.
'failure': failure due to the speaker is not completed the
restart process within the restart interval."
::= { fsbgp4Scalars 22 }
fsbgp4RestartReason OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
softwareRestart (1),
swReloadUpgrade (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's restarter reason code of BGP graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant. This object is persistent and when written
the entity SHOULD save the change to non-volatile storage."
DEFVAL {softwareRestart}
::= { fsbgp4Scalars 23 }
fsbgp4ForwardingPreservation OBJECT-TYPE
SYNTAX INTEGER {
preserved (1),
notPreserved (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the forwarding plane is preserved during restart or not"
::= { fsbgp4Scalars 24 }
fsbgp4IsTrapEnabled OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to disable, then the NOTIFICATION messages wont be sent to
the SNMP Manager. If enabled, NOTIFICATION messages are sent."
DEFVAL { enable }
::= { fsbgp4Scalars 25 }
fsbgp4NextHopProcessingInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the interval at which next hops will be mointored for reachablity"
DEFVAL { 60 }
::= { fsbgp4Scalars 26 }
fsbgp4IBGPRedistributionStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to enable, IBGP routes will also be redistributed to other
IGP protocols when redistribution is enabled for that protocol"
DEFVAL { disable }
::= { fsbgp4Scalars 27 }
fsbgp4IBGPMaxPaths OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of internal BGP multipath routes to be added per destination network in Routing table.
When this object takes the value 1, then only best route is added to Forwarding table.
This configuration will have effect only after hard/soft reset."
DEFVAL { 1 }
::= { fsbgp4Scalars 28 }
fsbgp4EBGPMaxPaths OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of external BGP multipath routes to be added per destination network in Routing table.
When this object takes the value 1, then only best route is added to Forwarding table.
This configuration will have effect only after hard/soft reset."
DEFVAL { 1 }
::= { fsbgp4Scalars 29 }
fsbgp4EIBGPMaxPaths OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of external plus internal BGP multipath routes (with same AS PATH) to be
added per destination network in Routing table.
When this object takes the value 1, then only best route is added to Forwarding table.
This configuration will have effect only after hard/soft reset."
DEFVAL { 1 }
::= { fsbgp4Scalars 30 }
fsbgp4OperIBGPMaxPaths OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational value for Maximum number of internal BGP multipath routes to be added per destination network
in Routing table.
When this object takes the value 1, then only best route is added to Forwarding table."
DEFVAL { 1 }
::= { fsbgp4Scalars 31 }
fsbgp4OperEBGPMaxPaths OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational value for Maximum number of external BGP multipath routes that to be added per
destination network in Routing table.
When this object takes the value 1, then only best route is added to Forwarding table."
DEFVAL { 1 }
::= { fsbgp4Scalars 32 }
fsbgp4OperEIBGPMaxPaths OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational value for Maximum number of external plus internal BGP multipath routes
(with same AS PATH) to be added per destination network in Routing table.
When this object takes the value 1, then only best route is added to Forwarding table."
DEFVAL { 1 }
::= { fsbgp4Scalars 33 }
fsbgp4FourByteASNSupportStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable 4 byte ASN support in BGP Speaker.
This can be configured only if fsbgp4GlobalAdminStatus is down."
DEFVAL { enable }
::= { fsbgp4Scalars 34 }
fsbgp4FourByteASNotationType OBJECT-TYPE
SYNTAX INTEGER {
asplain (1),
asdot (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the notation to be used to display the 4 byte ASN. This
will change only the way the AS number is represented within router show
commands in the Command Line Interface (CLI) framework. This object can be
configured only if fsbgp4FourByteASNSupportStatus is enabled"
DEFVAL { asplain }
::= { fsbgp4Scalars 35 }
-- MIB FOR FSBGP_PEER_EXTENSIONS_TABLE BEGIN
-- This table is an Extension to the bgpPeerTable from stdbgp4.mib.
-- This table contains, one entry per BGP peer, information
-- about the BGP peer.
fsbgp4PeerExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4PeerExtEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"BGP Peer Extension Table. The entries in the table specifies
the additional features supported for a peer by futureBGP4
Speaker in addition to the features specified as in bgpPeerTable
(described in stdbgp4.mib.). All entries in this table can be
configured only if fsbgp4LocalAs has be configured. This table is deprecated
and corresponding functionality is met using the objects in fsbgp4MpePeerExtTable. If
configured,this value overrides the values used in fsbgp4MpePeerExtTable MIB object"
::= { fsbgp 2 }
fsbgp4PeerExtEntry OBJECT-TYPE
SYNTAX Fsbgp4PeerExtEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry containing information about the additional features supported
for a peer by futureBGP4 Speaker. This object is deprecated and
corresponding functionality is met using the objects in fsbgp4MpePeerExtTable.
If configured,this value overrides the values used in fsbgp4MpePeerExtTable MIB object"
INDEX { fsbgp4PeerExtPeerRemoteAddr }
::= { fsbgp4PeerExtTable 1 }
Fsbgp4PeerExtEntry ::= SEQUENCE {
fsbgp4PeerExtPeerRemoteAddr
IpAddress,
fsbgp4PeerExtConfigurePeer
INTEGER,
fsbgp4PeerExtPeerRemoteAs
Unsigned32,
fsbgp4PeerExtEBGPMultiHop
INTEGER,
fsbgp4PeerExtNextHopSelf
INTEGER,
fsbgp4PeerExtConnSrcIfId
Integer32,
fsbgp4PeerExtRflClient
INTEGER
}
fsbgp4PeerExtPeerRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The remote IP address of this entry's BGP peer."
::= { fsbgp4PeerExtEntry 1 }
fsbgp4PeerExtConfigurePeer OBJECT-TYPE
SYNTAX INTEGER
{
create (1),
delete (2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to create or delete a peer. If called with create
and no matching peer exists, then a new peer entry will be created. The
admin status of this newly created peer will be stop. To enable the peer
set the peers remote AS (fsbgp4PeerExtPeerRemoteAS)and change the peer's
admin state (bgpPeerAdminState in stdbgp4.mib) to start. If this object
is called with create and a matching peer exists, then no action is done.
If called with delete and if a matching peer exists, then the complete
instance associated with that peer will be deleted."
::= { fsbgp4PeerExtEntry 2 }
fsbgp4PeerExtPeerRemoteAs OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The remote autonomous system number of the Peer. The peer admin status
can be made up only if this object is configured for a valid AS number.
When OPEN message is received from this peer during the BGP Connection
establishment, this configured AS value is compared against the AS number
received in the OPEN message. If both matches, then connection
establishment continues. If there is any mismatch, then the connection is
terminated. This object can be set only when the peer's admin status is
down."
::= { fsbgp4PeerExtEntry 3 }
fsbgp4PeerExtEBGPMultiHop OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected. By default, only directly connected EBGP peers are allowed.
For the internal peers, this object has no effect."
DEFVAL { disable }
::= { fsbgp4PeerExtEntry 4 }
fsbgp4PeerExtNextHopSelf OBJECT-TYPE
SYNTAX INTEGER
{
automatic(1),
self(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies how the next hop attribute sent in the update
messages to this peer has to be generated. When the object takes the
value of self,the next Hop attribute will always be the sender Local
Address else the next hop will be generated based on the IP address of
the destination and the present next hop in the route information."
DEFVAL { automatic }
::= { fsbgp4PeerExtEntry 5 }
fsbgp4PeerExtConnSrcIfId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object specifies which address should be used as the source address
of the TCP session initiated with the Peer. By default this object takes
value as 0 and the source address of the TCP session is filled by TCP.
This object can take value of any interface identifier. If this object
refers to a valid interface identifier, then the TCP session initiated
with the peer should have the corresponding interface address as the
source address."
DEFVAL { 0 }
::= { fsbgp4PeerExtEntry 6 }
fsbgp4PeerExtRflClient OBJECT-TYPE
SYNTAX INTEGER
{
nonClient (1),
client (2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies whether the peer is Client peer or Non-Client
peer. By default, the peer is created as Non-Client Peer."
DEFVAL {1}
::= {fsbgp4PeerExtEntry 7 }
-- MIB FOR FSBGP_PEER_EXTENSIONS_TABLE END
--- Multi-Exit Discriminator Table
--- This table specifies the value that has to be assigned to the
--- Multi-Exit Discriminator attribute when an update is sent.
fsbgp4MEDTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MEDEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"BGP4 MED table. This table contains the MED values that are to
be assigned to routes. This table is deprecated and the corresponding
functionality is met using objects in fsbgp4MpeMEDTable. If configured,
this value overrides the value used in fsbgp4MpeMEDTable."
::= {fsbgp 3 }
fsbgp4MEDEntry OBJECT-TYPE
SYNTAX Fsbgp4MEDEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry containing information about the MED value."
INDEX { fsbgp4MEDIndex }
::= { fsbgp4MEDTable 1 }
Fsbgp4MEDEntry ::= SEQUENCE {
fsbgp4MEDIndex
Integer32,
fsbgp4MEDAdminStatus
INTEGER,
fsbgp4MEDRemoteAS
Unsigned32,
fsbgp4MEDIPAddrPrefix
IpAddress,
fsbgp4MEDIPAddrPrefixLen
Integer32,
fsbgp4MEDIntermediateAS
DisplayString,
fsbgp4MEDDirection
INTEGER,
fsbgp4MEDValue
Unsigned32,
fsbgp4MEDPreference
INTEGER
}
fsbgp4MEDIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
" This is the index to the table. Any entry in the table can be
configured only if fsbgp4LocalAs is set."
::= { fsbgp4MEDEntry 1 }
fsbgp4MEDAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN."
::= {fsbgp4MEDEntry 2 }
fsbgp4MEDRemoteAS OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
" The remote autonomous system with which this entry is associated.
A value of zero indicates that this entry is not valid and will not
be matched for when the MED value for an update is calculated."
DEFVAL { 0 }
::= { fsbgp4MEDEntry 3 }
fsbgp4MEDIPAddrPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"An IP address prefix in the Network Layer Reachability Information
field in updates. A value of zero indicates that the entry is not
valid and will not be matched for when the MED value for an update is
calculated."
DEFVAL { '00000000'H }
::= { fsbgp4MEDEntry 4 }
fsbgp4MEDIPAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Length in bits of the IP address prefix in the Network Layer Reachability
Information field. A value of zero indicates that the entry is not
valid and will not be matched for when the MED value for an update is
calculated."
DEFVAL { 0 }
::= { fsbgp4MEDEntry 5 }
fsbgp4MEDIntermediateAS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Comma seperated list of AS numbers that are to
be checked against the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update.Maximum configurable size is 100."
::= { fsbgp4MEDEntry 6 }
fsbgp4MEDDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The direction of the update with which the entry is to be associated."
DEFVAL { in }
::= { fsbgp4MEDEntry 7 }
fsbgp4MEDValue OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 2147483647 )
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The value assigned to the MED Attribute for the route present in NLRI"
DEFVAL { 0 }
::= { fsbgp4MEDEntry 8 }
fsbgp4MEDPreference OBJECT-TYPE
SYNTAX INTEGER {
false(1),
true(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies whether the value present
in this entry takes precedence when the attribute
is already present in the update message that has
been received."
DEFVAL { false }
::= { fsbgp4MEDEntry 9 }
-- Local Preference Table.
-- This table specifies the value that has to assigned to the
-- Local Preference attribute when an update is sent to an
-- internal Peer or received from an external or internal peer.
fsbgp4LocalPrefTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4LocalPrefEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"BGP Local Preference table. This table contains,
the value that is to be assigned to the Local
Preference attibute."
::= { fsbgp 4 }
fsbgp4LocalPrefEntry OBJECT-TYPE
SYNTAX Fsbgp4LocalPrefEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry containing information about the connection with a BGP peer."
INDEX { fsbgp4LocalPrefIndex }
::= {fsbgp4LocalPrefTable 1 }
Fsbgp4LocalPrefEntry ::= SEQUENCE {
fsbgp4LocalPrefIndex
Integer32,
fsbgp4LocalPrefAdminStatus
INTEGER,
fsbgp4LocalPrefRemoteAS
Unsigned32,
fsbgp4LocalPrefIPAddrPrefix
IpAddress,
fsbgp4LocalPrefIPAddrPrefixLen
Integer32,
fsbgp4LocalPrefIntermediateAS
DisplayString,
fsbgp4LocalPrefDirection
INTEGER,
fsbgp4LocalPrefValue
Unsigned32,
fsbgp4LocalPrefPreference
INTEGER
}
fsbgp4LocalPrefIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This is the index to the table. Any entry in the table can be
configured only if fsbgp4LocalAs is set."
::= { fsbgp4LocalPrefEntry 1 }
fsbgp4LocalPrefAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN."
::= { fsbgp4LocalPrefEntry 2 }
fsbgp4LocalPrefRemoteAS OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The remote autonomous system with which this entry
is associated. A value of zero indicates that this
entry is not valid and will not be matched for when
the LocalPref value for an update is calculated."
DEFVAL { 0 }
::= { fsbgp4LocalPrefEntry 3 }
fsbgp4LocalPrefIPAddrPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"An IP address prefix in the Network Layer Reachability Information field.
A value of zero indicates that the entry is not valid and will not be
matched for when the Local Pref value for an update is calculated."
DEFVAL { '00000000'H }
::= { fsbgp4LocalPrefEntry 4 }
fsbgp4LocalPrefIPAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Length in bits of the IP address prefix in the Network Layer Reachability
Information field. A value of zero indicates that the entry is not valid
and will not be matched for when the Local Pref value for an update
is calculated."
DEFVAL { 0 }
::= { fsbgp4LocalPrefEntry 5 }
fsbgp4LocalPrefIntermediateAS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Comma separated list of AS numbers that are to
be present in the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update.Maximum configurable size is 100."
::= { fsbgp4LocalPrefEntry 6 }
fsbgp4LocalPrefDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1), -- incoming updates
out(2) -- outgoing updates
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The direction of the update with which the entry is to be associated."
DEFVAL { in }
::= { fsbgp4LocalPrefEntry 7 }
fsbgp4LocalPrefValue OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 2147483647 )
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The value assigned to the LP Attribute for the route present in NLRI"
DEFVAL { 100 }
::= { fsbgp4LocalPrefEntry 8 }
fsbgp4LocalPrefPreference OBJECT-TYPE
SYNTAX INTEGER {
false(1),
true(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies whether the value present
in this entry takes precedence when the attribute
is already present in the update message that has
been received."
DEFVAL { false }
::= { fsbgp4LocalPrefEntry 9 }
-- Update Filter Table.
-- This table is used to filter out routing updates
fsbgp4UpdateFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4UpdateFilterEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"BGP Update Filter Table. This table contains
Rules to filter out updates based on the AS from
which it is received, NLRI and AS through which it
had passed."
::= { fsbgp 5 }
fsbgp4UpdateFilterEntry OBJECT-TYPE
SYNTAX Fsbgp4UpdateFilterEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry containing information about the updates
that are to be filtered."
INDEX { fsbgp4UpdateFilterIndex }
::= { fsbgp4UpdateFilterTable 1 }
Fsbgp4UpdateFilterEntry ::= SEQUENCE {
fsbgp4UpdateFilterIndex
Integer32,
fsbgp4UpdateFilterAdminStatus
INTEGER,
fsbgp4UpdateFilterRemoteAS
Unsigned32,
fsbgp4UpdateFilterIPAddrPrefix
IpAddress,
fsbgp4UpdateFilterIPAddrPrefixLen
Integer32,
fsbgp4UpdateFilterIntermediateAS
DisplayString,
fsbgp4UpdateFilterDirection
INTEGER,
fsbgp4UpdateFilterAction
INTEGER
}
fsbgp4UpdateFilterIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This is the index to the table. Any entry in the table can be configured
only if fsbgp4LocalAs is set."
::= { fsbgp4UpdateFilterEntry 1 }
fsbgp4UpdateFilterAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN."
::= { fsbgp4UpdateFilterEntry 2 }
fsbgp4UpdateFilterRemoteAS OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The remote autonomous system with which this entry
is associated. A value of zero indicates that this
entry is not valid and will not be matched for when
the update is checked."
DEFVAL { 0 }
::= { fsbgp4UpdateFilterEntry 3 }
fsbgp4UpdateFilterIPAddrPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"An IP address prefix in the Network Layer Reachability Information field.
A value of zero in this field indicates that the NLRI field may not be
matched."
DEFVAL { '00000000'H }
::= { fsbgp4UpdateFilterEntry 4 }
fsbgp4UpdateFilterIPAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Length in bits of the IP address prefix
in the Network Layer Reachability
Information field. A value of zero in this field
indicates that the NLRI field may not be matched."
DEFVAL { 0 }
::= { fsbgp4UpdateFilterEntry 5 }
fsbgp4UpdateFilterIntermediateAS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Comma separated list of AS numbers that are to
be present in the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update."
::= { fsbgp4UpdateFilterEntry 6 }
fsbgp4UpdateFilterDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1), -- incoming updates
out(2) -- outgoing updates
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The direction of the update with which the entry is to be associated."
DEFVAL { in }
::= { fsbgp4UpdateFilterEntry 7 }
fsbgp4UpdateFilterAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1), -- do not filter
filter (2) -- filter
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The action to be taken when the characteristics
that are specified in the entry is matched."
DEFVAL { filter }
::= { fsbgp4UpdateFilterEntry 8 }
-- Aggregation Table.
-- This table is used to aggregate the routing information
-- before the same are advertised to peers.
fsbgp4AggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4AggregateEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"BGP Aggregate Table. The entries in the table
specifies the IP address based on which the routing
information has to be aggregated."
::= { fsbgp 6 }
fsbgp4AggregateEntry OBJECT-TYPE
SYNTAX Fsbgp4AggregateEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry containing information about the IP address
on which the aggregation has to be done."
INDEX { fsbgp4AggregateIndex }
::= { fsbgp4AggregateTable 1 }
Fsbgp4AggregateEntry ::= SEQUENCE {
fsbgp4AggregateIndex
Integer32,
fsbgp4AggregateAdminStatus
INTEGER,
fsbgp4AggregateIPAddrPrefix
IpAddress,
fsbgp4AggregateIPAddrPrefixLen
Integer32,
fsbgp4AggregateAdvertise
INTEGER
}
fsbgp4AggregateIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This is the index to the table.Any entry in the table can be
configured only if fsbgp4LocalAs is set."
::= { fsbgp4AggregateEntry 1 }
fsbgp4AggregateAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The desired state of this entry."
::= { fsbgp4AggregateEntry 2 }
fsbgp4AggregateIPAddrPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"An IP address prefix in the Network Layer Reachability Information field.
This field is configurable only if the admin status is DOWN"
::= { fsbgp4AggregateEntry 3 }
fsbgp4AggregateIPAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Length in bits of the IP address prefix in the Network Layer Reachability
Information field. This field is configurable only if the admin status
is DOWN."
::= { fsbgp4AggregateEntry 4 }
fsbgp4AggregateAdvertise OBJECT-TYPE
SYNTAX INTEGER {
summaryOnly (1),
all (2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the route update that should be sent
to the peers -
summary-only - specifies that only the summarized route
has to be advertised to peers.
All - specifies that both the summary and the
more-specific routes based on which the summary entry
was generated has to be advertised to the peers."
::= { fsbgp4AggregateEntry 5 }
-- Route Redistribution (RRD) OBJECT DEFINITION BEGIN
fsbgp4RRDGroup OBJECT IDENTIFIER ::= { fsbgp 7 }
-- SCALAR_TABLE_BEGIN fsbgp4RRDGroup 3
fsbgp4RRDAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls redistribution of Direct, Static, IGP(OSPF,RIP) routes into
BGP. If this object is set to enable, then routes from protocols as
specified by fsbgp4RRDProtoMaskForEnable will be imported into BGP and
the BGP learnt routes will be distributed to IGP. If this object is set
as disable, then the routes learned from protocols specified by
fsbgp4RRDProtoMaskForEnable will be removed from BGP and no route will
be either distributed to or imported from IGP. This object can
be set only if fsbgp4GlobalAdminStatus is up. When the global admin
state changes the fsbgp4RRDAdminStatus also changes."
DEFVAL { enable }
::= { fsbgp4RRDGroup 1 }
fsbgp4RRDProtoMaskForEnable OBJECT-TYPE
SYNTAX Integer32
-- See the description
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit mask of source protocols from which routes are
imported to BGP.(LSB corresponds to Bit 0)
Bit 1, if set, indicates that direct routes can be
redistributed into BGP. (value = 2)
Bit 2, if set, indicates that static routes can be
redistributed into BGP. (value = 4)
Bit 7, if set, indicates that routes from RIP can be
redistributed into BGP. (value = 128)
Bit 12, if set, indicates that OSPF routes can be
redistributed into BGP. (value = 4096)
Other bits are reserved for future use."
::= { fsbgp4RRDGroup 2 }
fsbgp4RRDSrcProtoMaskForDisable OBJECT-TYPE
SYNTAX Integer32
-- See the description
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit mask of source protocols from which redistribution
to BGP is disabled.(LSB corresponds to Bit 0)
Bit 1, if set, indicates that direct routes cannot be
redistributed into BGP. (value = 2)
Bit 2, if set, indicates that static routes cannot be
redistributed into BGP. (value = 4)
Bit 7, if set, indicates that routes from RIP cannot be
redistributed into BGP. (value = 128)
Bit 12, if set, indicates that OSPF routes cannot be
redistributed into BGP. (value = 4096)
Other bits are reserved for future use."
::= { fsbgp4RRDGroup 3 }
fsbgp4RRDDefaultMetric OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 2147483647 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default metric value for the IGP routes and static route. If
configured to 0, the metric received from the IGP route will be used.
If configured to other value, the MED value of the redistributed routes
take this value. This value have no effect on the Direct routes."
DEFVAL { 0 }
::= { fsbgp4RRDGroup 4 }
fsbgp4RRDRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name Identifies the specified route-map
in the list of route-maps. If this Object needs to be
changed, first reset this object and then configure the
new value."
::= { fsbgp4RRDGroup 5 }
fsbgp4RRDMatchTypeEnable OBJECT-TYPE
SYNTAX INTEGER
{
external(1),
internal(2),
nssa-external(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Match type Enable specifies the OSPF route type that
needs to be redistributed into BGP, This object is
used only ospf redistribution."
::= { fsbgp4RRDGroup 6}
fsbgp4RRDMatchTypeDisable OBJECT-TYPE
SYNTAX INTEGER
{
external(1),
internal(2),
nssa-external(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Match type Disable specifies the OSPF route type
that should be disbled from redistribution into BGP.
This object is used only for OSPF protocol."
::= { fsbgp4RRDGroup 7}
fsbgp4RRDMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4RRDMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of metric values to
the redistributed routes."
::= { fsbgp4RRDGroup 8 }
fsbgp4RRDMetricEntry OBJECT-TYPE
SYNTAX Fsbgp4RRDMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configuration of single entry."
INDEX {fsBgp4RRDMetricProtocolId}
::= { fsbgp4RRDMetricTable 1 }
Fsbgp4RRDMetricEntry ::= SEQUENCE {
fsBgp4RRDMetricProtocolId INTEGER,
fsBgp4RRDMetricValue Integer32
}
fsBgp4RRDMetricProtocolId OBJECT-TYPE
SYNTAX INTEGER
{
ospf(1),
rip(2),
connected(3),
static(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Protocol Id for which the Metric value needs to be changed by the User."
::= { fsbgp4RRDMetricEntry 1 }
fsBgp4RRDMetricValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Metric value to be considered instead of the default value from RTM
for the protocol specified. If the value not secified by the user,
default metric value is considered."
::= { fsbgp4RRDMetricEntry 2 }
-- SCALAR_TABLE_END fsbgp4RRDGroup
-- RRD OBJECT DEFINITION END
-- MIB for Importing STATIC routes to BGP and Viewing non-BGP routes.
fsbgp4ImportRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4ImportRouteEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Non-BGP routes imported into the BGP RIB can be viewed through this table.
Also allows importing a static route into BGP.After updating the RIB tree,
if there is any change in the best route selected, then the route is
updated to the Common Forwarding table."
::= { fsbgp 8 }
fsbgp4ImportRouteEntry OBJECT-TYPE
SYNTAX Fsbgp4ImportRouteEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Import Route entry."
INDEX {
fsbgp4ImportRoutePrefix,
fsbgp4ImportRoutePrefixLen,
fsbgp4ImportRouteProtocol,
fsbgp4ImportRouteNextHop,
fsbgp4ImportRouteIfIndex,
fsbgp4ImportRouteMetric
}
::= { fsbgp4ImportRouteTable 1 }
Fsbgp4ImportRouteEntry ::= SEQUENCE {
fsbgp4ImportRoutePrefix IpAddress,
fsbgp4ImportRoutePrefixLen Integer32,
fsbgp4ImportRouteProtocol Integer32,
fsbgp4ImportRouteNextHop IpAddress,
fsbgp4ImportRouteIfIndex Integer32,
fsbgp4ImportRouteMetric Integer32,
fsbgp4ImportRouteAction INTEGER
}
fsbgp4ImportRoutePrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Prefix of the route to be imported."
::= { fsbgp4ImportRouteEntry 1 }
fsbgp4ImportRoutePrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Prefix length of the route."
::= { fsbgp4ImportRouteEntry 2 }
fsbgp4ImportRouteProtocol OBJECT-TYPE
SYNTAX Integer32 (2|3|8|13)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Protocol value for Non-BGP routes.
2- LOCAL,
3 - STATIC,
8 - RIP,
13 - OSPF.
Only STATIC routes (protocol 3) can be added through this table.
However all non-BGP protocol (Local, Static, RIP, OSPF) routes can
be viewed."
::= { fsbgp4ImportRouteEntry 3 }
fsbgp4ImportRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"NextHop Ipaddress for the route."
::= { fsbgp4ImportRouteEntry 4 }
fsbgp4ImportRouteIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Interface Index of the Route"
::= { fsbgp4ImportRouteEntry 5 }
fsbgp4ImportRouteMetric OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Metric for the route being imported."
::= { fsbgp4ImportRouteEntry 6 }
fsbgp4ImportRouteAction OBJECT-TYPE
SYNTAX INTEGER {
add (1), -- route addition
delete (2) -- route deletion
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Controls addition or deletion of route."
::= { fsbgp4ImportRouteEntry 7}
-- MIB for Importing DIRECT/STATIC routes to BGP end
-- MIB for getting FSM transition history
fsbgp4FsmTransitionHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4FsmTransitionHistEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Gets FSM transitions history per peer "
::= { fsbgp 9 }
fsbgp4FsmTransitionHistEntry OBJECT-TYPE
SYNTAX Fsbgp4FsmTransitionHistEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Fsm Hist entry."
INDEX {
fsbgp4Peer
}
::= { fsbgp4FsmTransitionHistTable 1 }
Fsbgp4FsmTransitionHistEntry ::= SEQUENCE {
fsbgp4Peer IpAddress,
fsbgp4FsmTransitionHist DisplayString
}
fsbgp4Peer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Peer from which FSM transition history would be read."
::= { fsbgp4FsmTransitionHistEntry 1 }
fsbgp4FsmTransitionHist OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
" sequence of FSM states separated by space"
::= { fsbgp4FsmTransitionHistEntry 2 }
-- MIB for getting FSM transitions history end
-- MIB FOR FSBGP_ROUTEREFLECTOR
fsbgpRfl OBJECT IDENTIFIER ::= {fsbgp 10}
fsbgp4RflScalars OBJECT IDENTIFIER ::= {fsbgpRfl 1}
fsbgp4RflbgpClusterId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured Cluster-ID of the local router. By default, when the BGP
speaker acts as Route Reflector, the BGP Identifier is used as the
cluster id. Administrator can overwrite the default cluster-id by
configuring this object. This object can be configured only if
fsbgp4LocalAS is configured."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { fsbgp4RflScalars 1 }
fsbgp4RflRflSupport OBJECT-TYPE
SYNTAX INTEGER {
none (1),
clientsupport (2),
noClientSupport (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired support of the Route Reflector in the cluster.
Note that none(1) value is for read-only. This object can be set only if
fsbgp4LocalAS is configured."
DEFVAL {2}
::= { fsbgp4RflScalars 2 }
--- Route Reflector PathAttrributes Table
--- Represents the information about BGP Route Reflection [RFC 2796] -
--- - path attributes for a specified path to a network.
fsbgp4RflRouteReflectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4RflRouteReflectorEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"BGP Route Reflector Table. This table indicates the Rfl path attributes
that are associated with specified path to a network."
::= {fsbgpRfl 2 }
fsbgp4RflRouteReflectorEntry OBJECT-TYPE
SYNTAX Fsbgp4RflRouteReflectorEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry containing information about the route reflection specific path
attributes received with a given route "
INDEX { fsbgp4RflPathAttrAddrPrefix,
fsbgp4RflPathAttrAddrPrefixLen,
fsbgp4RflPathAttrPeer
}
::= { fsbgp4RflRouteReflectorTable 1 }
Fsbgp4RflRouteReflectorEntry ::= SEQUENCE {
fsbgp4RflPathAttrAddrPrefix
IpAddress,
fsbgp4RflPathAttrAddrPrefixLen
Integer32,
fsbgp4RflPathAttrPeer
IpAddress,
fsbgp4RflPathAttrOriginatorId
OCTET STRING,
fsbgp4RflPathAttrClusterList
OCTET STRING
}
fsbgp4RflPathAttrAddrPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An IP address prefix in the NLRI field. This object is an IP address
containing the prefix with the length specified by fsbgp4RflPathAttrAddrPrefixLen.
Any bits beyond the length specified by fsbgp4RflPathAttrAddrPrefixLen are zeroed."
::= { fsbgp4RflRouteReflectorEntry 1 }
fsbgp4RflPathAttrAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Length in bits of the IP address prefix in NLRI field."
::= { fsbgp4RflRouteReflectorEntry 2 }
fsbgp4RflPathAttrPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The address of the peer where the path information was learned."
::= { fsbgp4RflRouteReflectorEntry 3 }
fsbgp4RflPathAttrOriginatorId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Originator-ID identifying the router that initially advertised
this destination to a Route Reflector. A value of 0.0.0.0 indicates
the absence of this attribute."
REFERENCE
"This attribute is defined in [RFC 2796]"
::= { fsbgp4RflRouteReflectorEntry 4 }
fsbgp4RflPathAttrClusterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4096))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A sequence of four octet long values Cluster-IDs representing the reflection path
that the route has passed. Each four octet long value represents the ID
of a cluster that the route has traversed. A length of zero (0)
indicates the absence of this attibute."
REFERENCE
"This attribute is defined in [RFC 2796]"
::= {fsbgp4RflRouteReflectorEntry 5 }
-- MIB FOR FSBGP_ROUTEREFLECTOR end
-- MIB FOR FSBGP_ROUTEFLAPDAMPING
fsbgp4Rfd OBJECT IDENTIFIER ::= { fsbgp 11}
fsbgp4RfdScalars OBJECT IDENTIFIER ::= { fsbgp4Rfd 1}
fsbgp4RfdCutOff OBJECT-TYPE
SYNTAX Integer32 (2000..3999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The figure-of-merit value above which the route will be suppressed.
This object can be set only if fsbgp4RfdAdminStatus is disabled
is set to down and fsbgp4LocalAS is configured."
DEFVAL { 2000 }
::= { fsbgp4RfdScalars 1 }
fsbgp4RfdReuse OBJECT-TYPE
SYNTAX Integer32 (100..1999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The figure-of-merit value below which the suppressed route will be reused.
This object can be set only if fsbgp4RfdAdminStatus is disabled
and fsbgp4LocalAS is configured."
DEFVAL { 750 }
::= { fsbgp4RfdScalars 2 }
fsbgp4RfdCeiling OBJECT-TYPE
SYNTAX Integer32 (4000..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest value the figure-of-merit can attain."
DEFVAL { 8000 }
::= { fsbgp4RfdScalars 3 }
fsbgp4RfdMaxHoldDownTime OBJECT-TYPE
SYNTAX Integer32 (1800..10800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum time (in seconds) a route can be suppressed.
This object can be set only if fsbgp4RfdAdminStatus is disabled
and fsbgp4LocalAS is configured."
DEFVAL { 3600 }
::= { fsbgp4RfdScalars 4 }
fsbgp4RfdDecayHalfLifeTime OBJECT-TYPE
SYNTAX Integer32 (600..2700)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time duration in seconds during which the figure-of-merit will be
reduced by half. This object can be set only if fsbgp4RfdAdminStatus is
disabled and fsbgp4LocalAS is configured."
DEFVAL { 900 }
::= { fsbgp4RfdScalars 5 }
fsbgp4RfdDecayTimerGranularity OBJECT-TYPE
SYNTAX Integer32 (1..10800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time granularity in seconds used to perform all decay calculations.
This object can be set only if fsbgp4RfdAdminStatus is disabled
and fsbgp4LocalAS is configured."
DEFVAL { 1 }
::= { fsbgp4RfdScalars 6 }
fsbgp4RfdReuseTimerGranularity OBJECT-TYPE
SYNTAX Integer32 (15..10800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval between evaluations of the reuse lists.
This object can be set only if fsbgp4RfdAdminStatus is disabled
and fsbgp4LocalAS is configured."
DEFVAL { 15 }
::= { fsbgp4RfdScalars 7 }
fsbgp4RfdReuseIndxArraySize OBJECT-TYPE
SYNTAX Integer32 (256..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Size of reuse index arrays.This object can be set only if
fsbgp4GlobalAdminStatus is set to down and fsbgp4LocalAS is
configured."
DEFVAL { 1024 }
::= { fsbgp4RfdScalars 8 }
fsbgp4RfdAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the RouteFlap Dampening feature of the BGP system.
The SupermicroBGP4 speaker's route flap dampending is functionally active only
when the RFD admin status is enabled. The RFD admin status can be enabled
only if the fsbgp4GlobalAdminStatus is set to up. When
fsbgp4GlobalAdminStatus is set to down, RFD admin status will also be
disabled. On disabling RFD admin status, the route dampening history
and peer dampening history will be cleared and the dampened routes will
be advertised as feasible routes. By default after the
fsbgp4GlobalAdminStatus is set to up, the RFD admin status will be made up.
If RfdAdmin is disabled the damping feature is alone the disabled, the
other rfd configurations will not be reset."
DEFVAL { enable }
::= { fsbgp4RfdScalars 9 }
--- Routes Damping History Table
fsbgp4RfdRtDampHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4RfdRtDampHistEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Route damping history table.This table contains the figure-of-merit and
the route status"
::= { fsbgp4Rfd 2 }
fsbgp4RfdRtDampHistEntry OBJECT-TYPE
SYNTAX Fsbgp4RfdRtDampHistEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry contains route damping history"
INDEX { fsbgp4PathAttrAddrPrefix,
fsbgp4PathAttrAddrPrefixLen,
fsbgp4PathAttrPeer,
fsbgp4RtDampHistInstance
}
::= { fsbgp4RfdRtDampHistTable 1 }
Fsbgp4RfdRtDampHistEntry ::= SEQUENCE {
fsbgp4PathAttrAddrPrefix
IpAddress,
fsbgp4PathAttrAddrPrefixLen
Integer32,
fsbgp4PathAttrPeer
IpAddress,
fsbgp4RtDampHistInstance
Integer32,
fsbgp4RfdRtFom
Integer32,
fsbgp4RfdRtLastUpdtTime
Integer32,
fsbgp4RfdRtState
INTEGER,
fsbgp4RfdRtStatus
INTEGER
}
fsbgp4PathAttrAddrPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An IP address prefix in the NLRI field. This object is an IP address
containing the prefix with the length specified by
fsbgp4PathAttrAddrPrefixLen. Any bits beyond the length specified by
bgp4PathAttrAddrPrefixLen are
zeroed."
::= { fsbgp4RfdRtDampHistEntry 1 }
fsbgp4PathAttrAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Length in bits of the IP address prefix in NLRI field."
::= { fsbgp4RfdRtDampHistEntry 2 }
fsbgp4PathAttrPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The Peer remote address of the peer where the path information was
learned."
::= { fsbgp4RfdRtDampHistEntry 3 }
fsbgp4RtDampHistInstance OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Multiple damping histories can be present for the same destination when
the peer is switching between two alternate AS Paths."
::= { fsbgp4RfdRtDampHistEntry 4 }
fsbgp4RfdRtFom OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The figure-of-merit of the route"
::= { fsbgp4RfdRtDampHistEntry 5 }
fsbgp4RfdRtLastUpdtTime OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time when the route figure-of-merit was updated."
::= {fsbgp4RfdRtDampHistEntry 6 }
fsbgp4RfdRtState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
suppressed (2),
unsuppressed (3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value gives the status whether the route is suppressed or not "
::= { fsbgp4RfdRtDampHistEntry 7 }
fsbgp4RfdRtStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
feasibleroute (2),
unfeasibleroute (3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value gives the status whether the route is feasible or unfeasible
route"
::= { fsbgp4RfdRtDampHistEntry 8 }
--- Peers Damping History Table
fsbgp4RfdPeerDampHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4RfdPeerDampHistEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Peer Damping history table. It contains the peer figure-of-merit and
peer status."
::= { fsbgp4Rfd 3 }
fsbgp4RfdPeerDampHistEntry OBJECT-TYPE
SYNTAX Fsbgp4RfdPeerDampHistEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry contains peer damping history"
INDEX { fsbgp4PeerRemoteIpAddr
}
::= { fsbgp4RfdPeerDampHistTable 1 }
Fsbgp4RfdPeerDampHistEntry ::= SEQUENCE {
fsbgp4PeerRemoteIpAddr
IpAddress,
fsbgp4RfdPeerFom
Integer32,
fsbgp4RfdPeerLastUpdtTime
Integer32,
fsbgp4RfdPeerState
INTEGER,
fsbgp4RfdPeerStatus
INTEGER
}
fsbgp4PeerRemoteIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The peer remote address of the peer."
::= { fsbgp4RfdPeerDampHistEntry 1 }
fsbgp4RfdPeerFom OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The current figure-of-merit of peer"
::= {fsbgp4RfdPeerDampHistEntry 2 }
fsbgp4RfdPeerLastUpdtTime OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time when the figure-of-merit was updated."
::= {fsbgp4RfdPeerDampHistEntry 3 }
fsbgp4RfdPeerState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
suppressed (2),
unsuppressed (3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This value gives the status whether peer is suppressed or not"
::= {fsbgp4RfdPeerDampHistEntry 4 }
fsbgp4RfdPeerStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
peerup (2),
peerdown (3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This value gives the status whether peer is up or down"
::= {fsbgp4RfdPeerDampHistEntry 5 }
---Routes Reuse List Table
fsbgp4RfdRtsReuseListTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4RfdRtsReuseListEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Routes Reuse List Table. It contains the IP prefix and prefix length."
::= { fsbgp4Rfd 4 }
fsbgp4RfdRtsReuseListEntry OBJECT-TYPE
SYNTAX Fsbgp4RfdRtsReuseListEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry contains routes reuse list"
INDEX { fsbgp4RtIPPrefix,
fsbgp4RtIPPrefixLen,
fsbgp4PeerRemAddress,
fsbgp4RfdRtReuseListInstance
}
::= { fsbgp4RfdRtsReuseListTable 1 }
Fsbgp4RfdRtsReuseListEntry ::= SEQUENCE {
fsbgp4RtIPPrefix
IpAddress,
fsbgp4RtIPPrefixLen
Integer32,
fsbgp4PeerRemAddress
IpAddress,
fsbgp4RfdRtReuseListInstance
Integer32,
fsbgp4RfdRtReuseListRtFom
Integer32,
fsbgp4RfdRtReuseListRtLastUpdtTime
Integer32,
fsbgp4RfdRtReuseListRtState
INTEGER,
fsbgp4RfdRtReuseListRtStatus
INTEGER
}
fsbgp4RtIPPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An IP address prefix in the NLRI field. This object is an IP address
containing the prefix with the length specified by fsbgp4RtIPPrefixLen.
Any bits beyond the length specified by fsbgp4IPPrefixLen are
zeroed."
::= { fsbgp4RfdRtsReuseListEntry 1 }
fsbgp4RtIPPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Length in bits of the IP address prefix in NLRI field."
::= { fsbgp4RfdRtsReuseListEntry 2 }
fsbgp4PeerRemAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The Peer remote address of the peer where the path information was
learned."
::= { fsbgp4RfdRtsReuseListEntry 3 }
fsbgp4RfdRtReuseListInstance OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Multiple entries can be present in the routes reuse list for the same
destination. When the external peer is switching between two AS paths,
both paths are penalized and inserted into routes reuse list.The Reuse
List Instance is used to read the particular instance of reuse entry"
::= {fsbgp4RfdRtsReuseListEntry 4 }
fsbgp4RfdRtReuseListRtFom OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The figure-of-merit of the route which is in the routes reuse list"
::= {fsbgp4RfdRtsReuseListEntry 5 }
fsbgp4RfdRtReuseListRtLastUpdtTime OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time when the route figure-of-merit was updated."
::= {fsbgp4RfdRtsReuseListEntry 6 }
fsbgp4RfdRtReuseListRtState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
suppressed (2),
unsuppressed (3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value gives the status whether the route is suppressed or not "
::= { fsbgp4RfdRtsReuseListEntry 7 }
fsbgp4RfdRtReuseListRtStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
feasibleroute (2),
unfeasibleroute (3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value gives the status whether the route is feasible or unfeasible
route"
::= { fsbgp4RfdRtsReuseListEntry 8 }
--- Peer's Reuse List Table
fsbgp4RfdPeerReuseListTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4RfdPeerReuseListEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Peer's Reuse List Table. It contains the Peer Remote Address."
::= { fsbgp4Rfd 5 }
fsbgp4RfdPeerReuseListEntry OBJECT-TYPE
SYNTAX Fsbgp4RfdPeerReuseListEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry contains routes reuse list"
INDEX { fsbgp4RfdPeerRemIpAddr
}
::= {fsbgp4RfdPeerReuseListTable 1 }
Fsbgp4RfdPeerReuseListEntry ::= SEQUENCE {
fsbgp4RfdPeerRemIpAddr
IpAddress,
fsbgp4RfdPeerReuseListPeerFom
Integer32,
fsbgp4RfdPeerReuseListLastUpdtTime
Integer32,
fsbgp4RfdPeerReuseListPeerState
INTEGER,
fsbgp4RfdPeerReuseListPeerStatus
INTEGER
}
fsbgp4RfdPeerRemIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The peer remote address of the peer which is in the peer's reuse list."
::= { fsbgp4RfdPeerReuseListEntry 1 }
fsbgp4RfdPeerReuseListPeerFom OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The current figure-of-merit of peer"
::= {fsbgp4RfdPeerReuseListEntry 2 }
fsbgp4RfdPeerReuseListLastUpdtTime OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time when the figure-of-merit was updated."
::= {fsbgp4RfdPeerReuseListEntry 3 }
fsbgp4RfdPeerReuseListPeerState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
suppressed (2),
unsuppressed (3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This value gives the status whether peer is suppressed or not"
::= {fsbgp4RfdPeerReuseListEntry 4 }
fsbgp4RfdPeerReuseListPeerStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
peerup (2),
peerdown (3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This value gives the status whether peer is up or down"
::= {fsbgp4RfdPeerReuseListEntry 5 }
-- MIB FOR FSBGP_ROUTEFLAPDAMPING end
-- MIB FOR FSBGP_COMMUNITY
fsbgpComm OBJECT IDENTIFIER ::= {fsbgp 12}
fsbgp4CommScalars OBJECT IDENTIFIER ::= {fsbgpComm 1}
fsbgp4CommMaxInFTblEntries OBJECT-TYPE
SYNTAX Integer32 (1..50000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Number of Entries in the Input Community Filter Table.
This object can not be set to a higher value than the initial value of the
object.However initial value can be changed in inc/system.size file"
DEFVAL { 10000 }
::= { fsbgp4CommScalars 1 }
fsbgp4CommMaxOutFTblEntries OBJECT-TYPE
SYNTAX Integer32 (1..50000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of entries in the outgoing community filter table.
This object can not be set to a higher value than the initial value of the
object.However initial value can be changed in inc/system.size file"
DEFVAL { 10000 }
::= { fsbgp4CommScalars 2 }
--- Routes Additive Community Table
--- Represents the additive communities configured for
--- destinations.
fsbgp4CommRouteAddCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CommRouteAddCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table is used to configure additive communities
for a given destination."
::= {fsbgpComm 2 }
fsbgp4CommRouteAddCommEntry OBJECT-TYPE
SYNTAX Fsbgp4CommRouteAddCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Routes configured additive communities Table Entry"
INDEX {fsbgp4AddCommIpNetwork,
fsbgp4AddCommIpPrefixLen,
fsbgp4AddCommVal
}
::= { fsbgp4CommRouteAddCommTable 1 }
Fsbgp4CommRouteAddCommEntry ::= SEQUENCE {
fsbgp4AddCommIpNetwork
IpAddress,
fsbgp4AddCommIpPrefixLen
Integer32,
fsbgp4AddCommVal
Unsigned32,
fsbgp4AddCommRowStatus
RowStatus
}
fsbgp4AddCommIpNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the destination"
::= { fsbgp4CommRouteAddCommEntry 1 }
fsbgp4AddCommIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4CommRouteAddCommEntry 2 }
fsbgp4AddCommVal OBJECT-TYPE
SYNTAX Unsigned32 (65536..4294901759|4294967041..4294967043)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Additive Community configured for the Route"
::= { fsbgp4CommRouteAddCommEntry 3 }
fsbgp4AddCommRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAS is configured."
::= { fsbgp4CommRouteAddCommEntry 4 }
--- Routes Delete Community Table
--- Represents the communities to be deleted for the
--- destinations.
fsbgp4CommRouteDeleteCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CommRouteDeleteCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table is used to configure delete communities
for a given destination."
::= {fsbgpComm 3 }
fsbgp4CommRouteDeleteCommEntry OBJECT-TYPE
SYNTAX Fsbgp4CommRouteDeleteCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Routes configured delete communities Table Entry"
INDEX {fsbgp4DeleteCommIpNetwork,
fsbgp4DeleteCommIpPrefixLen,
fsbgp4DeleteCommVal
}
::= { fsbgp4CommRouteDeleteCommTable 1 }
Fsbgp4CommRouteDeleteCommEntry ::= SEQUENCE {
fsbgp4DeleteCommIpNetwork
IpAddress,
fsbgp4DeleteCommIpPrefixLen
Integer32,
fsbgp4DeleteCommVal
Unsigned32,
fsbgp4DeleteCommRowStatus
RowStatus
}
fsbgp4DeleteCommIpNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the destination"
::= { fsbgp4CommRouteDeleteCommEntry 1 }
fsbgp4DeleteCommIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4CommRouteDeleteCommEntry 2 }
fsbgp4DeleteCommVal OBJECT-TYPE
SYNTAX Unsigned32 (65536..4294901759|4294967041..4294967043)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Delete Community configured for the Route"
::= { fsbgp4CommRouteDeleteCommEntry 3 }
fsbgp4DeleteCommRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAS is configured."
::= { fsbgp4CommRouteDeleteCommEntry 4 }
--- Routes Community Set Status Table
--- Represents the status or local policy (can be either, addition of
--- communities, deletion of communities or both or complete
--- ommission of communities) for destinations.
fsbgp4CommRouteCommSetStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CommRouteCommSetStatusEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table is used to configure the local policy of communities
for a given destination."
::= {fsbgpComm 4 }
fsbgp4CommRouteCommSetStatusEntry OBJECT-TYPE
SYNTAX Fsbgp4CommRouteCommSetStatusEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Routes configured delete communities Table Entry"
INDEX {fsbgp4CommSetStatusIpNetwork,
fsbgp4CommSetStatusIpPrefixLen
}
::= { fsbgp4CommRouteCommSetStatusTable 1 }
Fsbgp4CommRouteCommSetStatusEntry ::= SEQUENCE {
fsbgp4CommSetStatusIpNetwork
IpAddress,
fsbgp4CommSetStatusIpPrefixLen
Integer32,
fsbgp4CommSetStatus
INTEGER,
fsbgp4CommSetStatusRowStatus
RowStatus
}
fsbgp4CommSetStatusIpNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the destination"
::= { fsbgp4CommRouteCommSetStatusEntry 1 }
fsbgp4CommSetStatusIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4CommRouteCommSetStatusEntry 2 }
fsbgp4CommSetStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
set (2),
setnone (3),
modify (4)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Community Set status for the Route.
o none - is for read-only
o set - to send only with configured additive communities
o setnone - to send without communities,
o modify - to strip delete communities in received
communities and add additive communities
This object can be set only if fsbgp4LocalAs is configured."
DEFVAL { 4 }
::= { fsbgp4CommRouteCommSetStatusEntry 3 }
fsbgp4CommSetStatusRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Row status for creating entries into this table.
This object can be set only if fsbgp4LocalAs is configured."
::= { fsbgp4CommRouteCommSetStatusEntry 4 }
--- Peer Community Send Status Table
--- Represents the status or local policy (can be either, send or
--- do not send of communities) for peers.
fsbgp4CommPeerSendStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CommPeerSendStatusEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table is used to configure the local policy of communities
to send or not for a given peer."
::= {fsbgpComm 5 }
fsbgp4CommPeerSendStatusEntry OBJECT-TYPE
SYNTAX Fsbgp4CommPeerSendStatusEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Peer community Send Status Table Entry"
INDEX { fsbgp4PeerAddress
}
::= { fsbgp4CommPeerSendStatusTable 1 }
Fsbgp4CommPeerSendStatusEntry ::= SEQUENCE {
fsbgp4PeerAddress
IpAddress,
fsbgp4CommSendStatus
INTEGER,
fsbgp4CommPeerSendRowStatus
RowStatus
}
fsbgp4PeerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the Peer"
::= { fsbgp4CommPeerSendStatusEntry 1 }
fsbgp4CommSendStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
send (2),
donotsend (3)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Community Send status of the peer.
o none - is for read-only
o send - send communities to this peer
o donotsend - do not send communities to this peer.
This object can be set only if fsbgp4LocalAs is configured."
DEFVAL { 3 }
::= { fsbgp4CommPeerSendStatusEntry 2 }
fsbgp4CommPeerSendRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Row status for creating entries into this table. This object can be set
only if fsbgp4LocalAs is configured."
::= { fsbgp4CommPeerSendStatusEntry 3 }
--- Incoming Filter Table
--- Represents the incoming filter status (can be either accept/deny)
--- for a given community value
fsbgp4CommInFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CommInFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the incoming filter status
for a given community value"
::= {fsbgpComm 6 }
fsbgp4CommInFilterEntry OBJECT-TYPE
SYNTAX Fsbgp4CommInFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Incoming Communities Filter Table Entry"
INDEX { fsbgp4InFilterCommVal
}
::= { fsbgp4CommInFilterTable 1 }
Fsbgp4CommInFilterEntry ::= SEQUENCE {
fsbgp4InFilterCommVal
Unsigned32,
fsbgp4CommIncomingFilterStatus
INTEGER,
fsbgp4InFilterRowStatus
RowStatus
}
fsbgp4InFilterCommVal OBJECT-TYPE
SYNTAX Unsigned32 (65536..4294901759|4294967041..4294967043)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The community value for which the input filtering
policy is to be updated"
::= { fsbgp4CommInFilterEntry 1 }
fsbgp4CommIncomingFilterStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
accept (2),
deny (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Incoming filtering policy for the community.
o none - is for read-only
o accept - Accept the community value.
o deny - Deny the community value."
DEFVAL { 2 }
::= { fsbgp4CommInFilterEntry 2 }
fsbgp4InFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAs is configured."
::= { fsbgp4CommInFilterEntry 3 }
--- Outgoing Filter Table
--- Represents the outgoing filter status (can be either adevertise/filter)
--- for a given community value
fsbgp4CommOutFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CommOutFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the outgoing filter status
for a given community value"
::= {fsbgpComm 7 }
fsbgp4CommOutFilterEntry OBJECT-TYPE
SYNTAX Fsbgp4CommOutFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Outgoing Communities Filter Table Entry"
INDEX { fsbgp4OutFilterCommVal
}
::= { fsbgp4CommOutFilterTable 1 }
Fsbgp4CommOutFilterEntry ::= SEQUENCE {
fsbgp4OutFilterCommVal
Unsigned32,
fsbgp4CommOutgoingFilterStatus
INTEGER,
fsbgp4OutFilterRowStatus
RowStatus
}
fsbgp4OutFilterCommVal OBJECT-TYPE
SYNTAX Unsigned32 (65536..4294901759|4294967041..4294967043)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The community value for which the outgoing filtering
policy is to be updated"
::= { fsbgp4CommOutFilterEntry 1 }
fsbgp4CommOutgoingFilterStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
advertise (2),
filter (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing filtering policy for the community.
o none - is for read-only
o advertise - Advertise the community value.
o filter - Filter the community value."
DEFVAL { 2 }
::= { fsbgp4CommOutFilterEntry 2 }
fsbgp4OutFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAs is configured."
::= { fsbgp4CommOutFilterEntry 3 }
--- Received Route Communities Table
--- Represents all the communities that are received
--- with a given destination.
fsbgp4CommReceivedRouteCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CommReceivedRouteCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Received Communities table which contains the Communities
associated with the route that is received from peer."
::= {fsbgpComm 8 }
fsbgp4CommReceivedRouteCommEntry OBJECT-TYPE
SYNTAX Fsbgp4CommReceivedRouteCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Received Communities table which contains the Communities
associated with the route that is received from peer."
INDEX { fsbgp4IpNet,
fsbgp4IPPrefixLength,
fsbgp4PeerRemAddr
}
::= { fsbgp4CommReceivedRouteCommTable 1 }
Fsbgp4CommReceivedRouteCommEntry ::= SEQUENCE {
fsbgp4IpNet
IpAddress,
fsbgp4IPPrefixLength
Integer32,
fsbgp4PeerRemAddr
IpAddress,
fsbgp4ReceivedRouteCommPath
OCTET STRING
}
fsbgp4IpNet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the destination"
::= { fsbgp4CommReceivedRouteCommEntry 1 }
fsbgp4IPPrefixLength OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4CommReceivedRouteCommEntry 2 }
fsbgp4PeerRemAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The remote IP Address of peer"
::= { fsbgp4CommReceivedRouteCommEntry 3 }
fsbgp4ReceivedRouteCommPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..800))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Community Values received for the destination from this peer"
::= { fsbgp4CommReceivedRouteCommEntry 4 }
-- MIB FOR FSBGP_COMMUNITY end
-- MIB FOR FSBGP_EXTCOMM
fsbgpExtComm OBJECT IDENTIFIER ::= {fsbgp 13}
fsbgp4ExtCommScalars OBJECT IDENTIFIER ::= {fsbgpExtComm 1}
fsbgp4ExtCommMaxInFTblEntries OBJECT-TYPE
SYNTAX Integer32 (1..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Number of Entries in the Input Extended Community Filter Table.
This object can not be set to a higher value than the initial value of the
object.However initial value can be changed in inc/system.size file"
DEFVAL { 2000 }
::= { fsbgp4ExtCommScalars 1 }
fsbgp4ExtCommMaxOutFTblEntries OBJECT-TYPE
SYNTAX Integer32 (1..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of entries in the outgoing extended community filter table.
This object can not be set to a higher value than the initial value of the
object.However initial value can be changed in inc/system.size file"
DEFVAL { 2000 }
::= { fsbgp4ExtCommScalars 2 }
--- Routes Additive Ext-Community Table
--- Represents the additive extended communities configured for
--- destinations.
fsbgp4ExtCommRouteAddExtCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4ExtCommRouteAddExtCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table is used to configure additive extended communities
for a given destination."
::= {fsbgpExtComm 2 }
fsbgp4ExtCommRouteAddExtCommEntry OBJECT-TYPE
SYNTAX Fsbgp4ExtCommRouteAddExtCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Routes configured additive ext-communities Table Entry"
INDEX {fsbgp4AddExtCommIpNetwork,
fsbgp4AddExtCommIpPrefixLen,
fsbgp4AddExtCommVal
}
::= { fsbgp4ExtCommRouteAddExtCommTable 1 }
Fsbgp4ExtCommRouteAddExtCommEntry ::= SEQUENCE {
fsbgp4AddExtCommIpNetwork
IpAddress,
fsbgp4AddExtCommIpPrefixLen
Integer32,
fsbgp4AddExtCommVal
OCTET STRING,
fsbgp4AddExtCommRowStatus
RowStatus
}
fsbgp4AddExtCommIpNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the destination"
::= { fsbgp4ExtCommRouteAddExtCommEntry 1 }
fsbgp4AddExtCommIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4ExtCommRouteAddExtCommEntry 2 }
fsbgp4AddExtCommVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Additive Ext-Community for the destination"
::= { fsbgp4ExtCommRouteAddExtCommEntry 3 }
fsbgp4AddExtCommRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAs is configured."
::= { fsbgp4ExtCommRouteAddExtCommEntry 4 }
--- Routes Delete Ext-Community Table
--- Represents the extended communities to be deleted for the
--- destinations.
fsbgp4ExtCommRouteDeleteExtCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4ExtCommRouteDeleteExtCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table is used to configure delete extended communities
for a given destination."
::= {fsbgpExtComm 3 }
fsbgp4ExtCommRouteDeleteExtCommEntry OBJECT-TYPE
SYNTAX Fsbgp4ExtCommRouteDeleteExtCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Routes configured delete ext-communities Table Entry"
INDEX {fsbgp4DeleteExtCommIpNetwork,
fsbgp4DeleteExtCommIpPrefixLen,
fsbgp4DeleteExtCommVal
}
::= { fsbgp4ExtCommRouteDeleteExtCommTable 1 }
Fsbgp4ExtCommRouteDeleteExtCommEntry ::= SEQUENCE {
fsbgp4DeleteExtCommIpNetwork
IpAddress,
fsbgp4DeleteExtCommIpPrefixLen
Integer32,
fsbgp4DeleteExtCommVal
OCTET STRING,
fsbgp4DeleteExtCommRowStatus
RowStatus
}
fsbgp4DeleteExtCommIpNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the destination"
::= { fsbgp4ExtCommRouteDeleteExtCommEntry 1 }
fsbgp4DeleteExtCommIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4ExtCommRouteDeleteExtCommEntry 2 }
fsbgp4DeleteExtCommVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Delete Ext-Community for the destination"
::= { fsbgp4ExtCommRouteDeleteExtCommEntry 3 }
fsbgp4DeleteExtCommRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Row status to create entries into this table. This object can be set only
if fsbgp4LocalAs is configured."
::= { fsbgp4ExtCommRouteDeleteExtCommEntry 4 }
--- Routes Ext-Community Set Status Table
--- Represents the status or local policy (can be either, addition of extended
--- communities, deletion of extended communities or both or complete
--- ommission of extended communities) for destinations.
fsbgp4ExtCommRouteExtCommSetStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4ExtCommRouteExtCommSetStatusEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table is used to configure the local policy of extended communities
for a given destination."
::= {fsbgpExtComm 4 }
fsbgp4ExtCommRouteExtCommSetStatusEntry OBJECT-TYPE
SYNTAX Fsbgp4ExtCommRouteExtCommSetStatusEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Routes configured delete ext-communities Table Entry"
INDEX { fsbgp4ExtCommSetStatusIpNetwork,
fsbgp4ExtCommSetStatusIpPrefixLen
}
::= { fsbgp4ExtCommRouteExtCommSetStatusTable 1 }
Fsbgp4ExtCommRouteExtCommSetStatusEntry ::= SEQUENCE {
fsbgp4ExtCommSetStatusIpNetwork
IpAddress,
fsbgp4ExtCommSetStatusIpPrefixLen
Integer32,
fsbgp4ExtCommSetStatus
INTEGER,
fsbgp4ExtCommSetStatusRowStatus
RowStatus
}
fsbgp4ExtCommSetStatusIpNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the destination"
::= { fsbgp4ExtCommRouteExtCommSetStatusEntry 1 }
fsbgp4ExtCommSetStatusIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP prefix length of the destination"
::= { fsbgp4ExtCommRouteExtCommSetStatusEntry 2 }
fsbgp4ExtCommSetStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
set (2),
setnone (3),
modify (4)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Ext-Community Set status for the Route.
o none - is for read-only
o set - to send only with configured additive ext-communities
o setnone - to send without ext-communities,
o modify - to strip delete ext-communities in received extended
communities and add additive ext-communities.
This object can be set only if fsbgp4LocalAs is configured."
DEFVAL { 4 }
::= { fsbgp4ExtCommRouteExtCommSetStatusEntry 3 }
fsbgp4ExtCommSetStatusRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Row status to create entries into this table. This object can be set only
if fsbgp4LocalAs is configured."
::= { fsbgp4ExtCommRouteExtCommSetStatusEntry 4 }
--- Peer Extended Community Send Status Table
--- Represents the status or local policy (can be either, send or
--- do not send of extended communities) for peers.
fsbgp4ExtCommPeerSendStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4ExtCommPeerSendStatusEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table is used to configure the local policy of extended communities
to send or not for a given peer."
::= {fsbgpExtComm 5}
fsbgp4ExtCommPeerSendStatusEntry OBJECT-TYPE
SYNTAX Fsbgp4ExtCommPeerSendStatusEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Peer extended community Send Status Table Entry"
INDEX { fsbgp4ExtCommPeerAddress
}
::= { fsbgp4ExtCommPeerSendStatusTable 1 }
Fsbgp4ExtCommPeerSendStatusEntry ::= SEQUENCE {
fsbgp4ExtCommPeerAddress
IpAddress,
fsbgp4ExtCommPeerSendStatus
INTEGER,
fsbgp4ExtCommPeerSendStatusRowStatus
RowStatus
}
fsbgp4ExtCommPeerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the Peer"
::= { fsbgp4ExtCommPeerSendStatusEntry 1 }
fsbgp4ExtCommPeerSendStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
send (2),
donotsend (3)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Extended Community Send status of the peer.
o none - is for read-only
o send - send extended communities to this peer
o donotsend - do not send extended communities to this peer.
This object can be set only if fsbgp4LocalAs is configured."
DEFVAL { 3 }
::= { fsbgp4ExtCommPeerSendStatusEntry 2 }
fsbgp4ExtCommPeerSendStatusRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Row status to create entries into this table.This object can be set only
if fsbgp4LocalAs is configured."
::= { fsbgp4ExtCommPeerSendStatusEntry 3 }
--- Incoming Extended Community Filter Table
--- Represents the incoming filter status (can be either accept/deny)
--- for a given extended community value
fsbgp4ExtCommInFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4ExtCommInFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the incoming filter status
for a given extended community value"
::= {fsbgpExtComm 6}
fsbgp4ExtCommInFilterEntry OBJECT-TYPE
SYNTAX Fsbgp4ExtCommInFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Incoming Extended Communities Filter Table Entry"
INDEX { fsbgp4ExtCommInFilterCommVal
}
::= { fsbgp4ExtCommInFilterTable 1 }
Fsbgp4ExtCommInFilterEntry ::= SEQUENCE {
fsbgp4ExtCommInFilterCommVal
OCTET STRING,
fsbgp4ExtCommIncomingFilterStatus
INTEGER,
fsbgp4ExtCommInFilterRowStatus
RowStatus
}
fsbgp4ExtCommInFilterCommVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The extended community value for which the input filtering
policy is to be updated"
::= { fsbgp4ExtCommInFilterEntry 1 }
fsbgp4ExtCommIncomingFilterStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
accept (2),
deny (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Incoming filtering policy for the extended community.
o none - is for read-only
o accept - Accept the extended community value.
o deny - Deny the extended community value."
DEFVAL { 2 }
::= { fsbgp4ExtCommInFilterEntry 2 }
fsbgp4ExtCommInFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating the entries into this table.This object can be set
only if fsbgp4LocalAs is configured."
::= { fsbgp4ExtCommInFilterEntry 3 }
--- Outgoing Extended Community Filter Table
--- Represents the outgoing filter status (can be either adevertise/filter)
--- for a given extended community value
fsbgp4ExtCommOutFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4ExtCommOutFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the outgoing filter status
for a given extended community value"
::= {fsbgpExtComm 7}
fsbgp4ExtCommOutFilterEntry OBJECT-TYPE
SYNTAX Fsbgp4ExtCommOutFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Outgoing Extended Communities Filter Table Entry"
INDEX { fsbgp4ExtCommOutFilterCommVal
}
::= { fsbgp4ExtCommOutFilterTable 1 }
Fsbgp4ExtCommOutFilterEntry ::= SEQUENCE {
fsbgp4ExtCommOutFilterCommVal
OCTET STRING,
fsbgp4ExtCommOutgoingFilterStatus
INTEGER,
fsbgp4ExtCommOutFilterRowStatus
RowStatus
}
fsbgp4ExtCommOutFilterCommVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The extended community value for which the outgoing filtering
policy is to be updated"
::= { fsbgp4ExtCommOutFilterEntry 1 }
fsbgp4ExtCommOutgoingFilterStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
advertise (2),
noadvertise (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing filtering policy for the extended community.
o none - is for read-only
o advertise - Advertise the extended community value.
o filter - Filter the extended community value."
::= { fsbgp4ExtCommOutFilterEntry 2 }
fsbgp4ExtCommOutFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status to create entries into this table.This object can be set
only if fsbgp4LocalAs is configured."
::= { fsbgp4ExtCommOutFilterEntry 3 }
--- Peer Link Bandwidth Table
--- Represents the link bandwidth for a given peer.
fsbgp4PeerLinkBwTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4PeerLinkBwEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table is used to configure the link bandwidths for a given peer"
::= {fsbgpExtComm 8}
fsbgp4PeerLinkBwEntry OBJECT-TYPE
SYNTAX Fsbgp4PeerLinkBwEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Peer Link Bandwidth Table Entry"
INDEX { fsbgp4PeerLinkRemAddr
}
::= { fsbgp4PeerLinkBwTable 1 }
Fsbgp4PeerLinkBwEntry ::= SEQUENCE {
fsbgp4PeerLinkRemAddr
IpAddress,
fsbgp4LinkBandWidth
Unsigned32,
fsbgp4PeerLinkBwRowStatus
RowStatus
}
fsbgp4PeerLinkRemAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the Peer"
::= { fsbgp4PeerLinkBwEntry 1 }
fsbgp4LinkBandWidth OBJECT-TYPE
SYNTAX Unsigned32 (7000..4294967295)
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Link Bandwidth in bytes per second.This object can be set only if
fsbgp4LocalAs is configured."
::= { fsbgp4PeerLinkBwEntry 2 }
fsbgp4PeerLinkBwRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Row Status to create entries into this table.
This object can be set only if fsbgp4LocalAs is configured."
::= { fsbgp4PeerLinkBwEntry 3 }
--- Received Route Extended Communities Table
--- Represents all the extended communities that are received
--- with a given destination.
fsbgp4ExtCommReceivedRouteExtCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4ExtCommReceivedRouteExtCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Received Extended Communities table which contains the Extended
Communities associated with the route that is received from peer."
::= {fsbgpExtComm 9 }
fsbgp4ExtCommReceivedRouteExtCommEntry OBJECT-TYPE
SYNTAX Fsbgp4ExtCommReceivedRouteExtCommEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Received extended communities table Entry"
INDEX { fsbgp4ExtCommIpNet,
fsbgp4ExtCommIPPrefixLength,
fsbgp4ExtCommPeerRemAddr
}
::= { fsbgp4ExtCommReceivedRouteExtCommTable 1 }
Fsbgp4ExtCommReceivedRouteExtCommEntry ::= SEQUENCE {
fsbgp4ExtCommIpNet
IpAddress,
fsbgp4ExtCommIPPrefixLength
Integer32,
fsbgp4ExtCommPeerRemAddr
IpAddress,
fsbgp4ReceivedRouteExtCommPath
OCTET STRING
}
fsbgp4ExtCommIpNet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP address of the destination"
::= { fsbgp4ExtCommReceivedRouteExtCommEntry 1 }
fsbgp4ExtCommIPPrefixLength OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4ExtCommReceivedRouteExtCommEntry 2 }
fsbgp4ExtCommPeerRemAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The remote IP Address of peer"
::= { fsbgp4ExtCommReceivedRouteExtCommEntry 3 }
fsbgp4ReceivedRouteExtCommPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..800))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The ExtCommunity Values received for the destination from this peer"
::= { fsbgp4ExtCommReceivedRouteExtCommEntry 4 }
-- MIB FOR FSBGP_EXTCOMM end
-- MIB FOR FSBGP_CABILITIES
fsbgpCaps OBJECT IDENTIFIER ::= {fsbgp 14}
fsbgpCapScalars OBJECT IDENTIFIER ::= {fsbgpCaps 1}
fsbgp4CapabilitySupportAvailable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable determines whether the Capability Advertisement
Support is enabled or not.This object can be set only if
fsbgp4GlobalAdminStatus is set to down and fsbgp4LocalAS is configured."
DEFVAL { true }
::= { fsbgpCapScalars 1 }
fsbgp4MaxCapsPerPeer OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of Capabilities that can be supported per peer
or received from peer.
This object can not be set to a higher value than the initial value of the
object.However initial value can be changed in inc/system.size file"
DEFVAL { 10 }
::= { fsbgpCapScalars 2 }
fsbgp4MaxInstancesPerCap OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of Instances of same Capability code can be advertised
to peer or received from peer.
This object can not be set to a higher value than the initial value of the
object.However initial value can be changed in inc/system.size file"
DEFVAL { 5 }
::= { fsbgpCapScalars 3 }
fsbgp4MaxCapDataSize OBJECT-TYPE
SYNTAX Integer32 (4..252)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum size of the Capability Data size of each Capability.
To enable packing, the size should be multiples of 4.
This object can not be set to a higher value than the initial value of the
object.However initial value can be changed in inc/system.size file"
DEFVAL { 16 }
::= { fsbgpCapScalars 4 }
--- Supported Capabilities Table
fsbgp4CapSupportedCapsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CapSupportedCapsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Supported Capabilities Table. This table contains, the capabilities
that are supported for particular peer"
::= {fsbgpCaps 2 }
fsbgp4CapSupportedCapsEntry OBJECT-TYPE
SYNTAX Fsbgp4CapSupportedCapsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry contains supported Capabilites"
INDEX { fsbgp4CapPeerRemoteIpAddr,
fsbgp4SupportedCapabilityCode,
fsbgp4SupportedCapabilityInstance
}
::= { fsbgp4CapSupportedCapsTable 1 }
Fsbgp4CapSupportedCapsEntry ::= SEQUENCE {
fsbgp4CapPeerRemoteIpAddr
IpAddress,
fsbgp4SupportedCapabilityCode
Integer32,
fsbgp4SupportedCapabilityInstance
Integer32,
fsbgp4SupportedCapabilityLength
Integer32,
fsbgp4SupportedCapabilityValue
OCTET STRING,
fsbgp4CapSupportedCapsRowStatus
RowStatus
}
fsbgp4CapPeerRemoteIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The remote IP Address of Peer "
::= { fsbgp4CapSupportedCapsEntry 1 }
fsbgp4SupportedCapabilityCode OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"BGP-4 Capability Advertisement Capability Code that is supported for
peer."
::= { fsbgp4CapSupportedCapsEntry 2 }
fsbgp4SupportedCapabilityInstance OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Multiple instances of a given Capability may be supported
by a BGP speaker. This variable is used to index them."
::= { fsbgp4CapSupportedCapsEntry 3 }
fsbgp4SupportedCapabilityLength OBJECT-TYPE
SYNTAX Integer32 (0..251)
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The length of the supported Capability data"
::= { fsbgp4CapSupportedCapsEntry 4 }
fsbgp4SupportedCapabilityValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..251))
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The value of the supported Capability"
::= { fsbgp4CapSupportedCapsEntry 5 }
fsbgp4CapSupportedCapsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
" The variable displays the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative."
::= { fsbgp4CapSupportedCapsEntry 6 }
fsbgp4StrictCapabilityMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4StrictCapabilityMatchEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Strict Capability Match table.If the Strict Capability Match is enabled
for particular peer, the BGP session will be established only if peer
supports all the Capabilites that are supported by the speaker for
that peer.If enabled and the capabilities do not match strictly,then
the BGP session is terminated, without any attempt to auto re-peer.
If disabled, BGP session is established with common capabilities,if
present."
::= {fsbgpCaps 3 }
fsbgp4StrictCapabilityMatchEntry OBJECT-TYPE
SYNTAX Fsbgp4StrictCapabilityMatchEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry contains Strict Capability Match"
INDEX { fsbgp4PeerRemIpAddr
}
::= { fsbgp4StrictCapabilityMatchTable 1 }
Fsbgp4StrictCapabilityMatchEntry ::= SEQUENCE {
fsbgp4PeerRemIpAddr
IpAddress,
fsbgp4StrictCapabilityMatch
INTEGER
}
fsbgp4PeerRemIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The remote IP Address of Peer"
::= { fsbgp4StrictCapabilityMatchEntry 1 }
fsbgp4StrictCapabilityMatch OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This value gives whether Strict Capability Match is enabled or
disabled for particular peer"
DEFVAL { disabled }
::= { fsbgp4StrictCapabilityMatchEntry 2 }
--- Announced Capabilities Table
fsbgp4CapsAnnouncedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CapsAnnouncedEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This Announced Capabilities table contains the capabilities that are
announced to the peer."
::= {fsbgpCaps 4 }
fsbgp4CapsAnnouncedEntry OBJECT-TYPE
SYNTAX Fsbgp4CapsAnnouncedEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry contains the Capabilities that are announced to peer"
INDEX { fsbgp4PeerIpAddr,
fsbgp4PeerCapAnnouncedCode,
fsbgp4PeerCapAnnouncedInstance
}
::= { fsbgp4CapsAnnouncedTable 1 }
Fsbgp4CapsAnnouncedEntry ::= SEQUENCE {
fsbgp4PeerIpAddr
IpAddress,
fsbgp4PeerCapAnnouncedCode
Integer32,
fsbgp4PeerCapAnnouncedInstance
Integer32,
fsbgp4PeerCapAnnouncedLength
Integer32,
fsbgp4PeerCapAnnouncedValue
OCTET STRING
}
fsbgp4PeerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The remote IP Address of BGP Peer"
::= { fsbgp4CapsAnnouncedEntry 1 }
fsbgp4PeerCapAnnouncedCode OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"BGP-4 Capability Advertisement Capability Code that is announced to peer."
::= { fsbgp4CapsAnnouncedEntry 2 }
fsbgp4PeerCapAnnouncedInstance OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Multiple instances of a given capability may be announced
to peer. This variable is used to index them."
::= { fsbgp4CapsAnnouncedEntry 3 }
fsbgp4PeerCapAnnouncedLength OBJECT-TYPE
SYNTAX Integer32 (0..251)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The length of the Capability data of announced Capability"
::= { fsbgp4CapsAnnouncedEntry 4 }
fsbgp4PeerCapAnnouncedValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..251))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of announced Capability"
::= { fsbgp4CapsAnnouncedEntry 5 }
--- Received Capabilities Table
fsbgp4CapReceivedCapsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CapReceivedCapsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Received Capabilities table which contains the Capabilities that are
received from peer."
::= {fsbgpCaps 5 }
fsbgp4CapReceivedCapsEntry OBJECT-TYPE
SYNTAX Fsbgp4CapReceivedCapsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry contains the received Capabilities"
INDEX { fsbgp4PeerRemoteAddress,
fsbgp4PeerCapReceivedCode,
fsbgp4PeerCapReceivedInstance
}
::= { fsbgp4CapReceivedCapsTable 1 }
Fsbgp4CapReceivedCapsEntry ::= SEQUENCE {
fsbgp4PeerRemoteAddress
IpAddress,
fsbgp4PeerCapReceivedCode
Integer32,
fsbgp4PeerCapReceivedInstance
Integer32,
fsbgp4PeerCapReceivedLength
Integer32,
fsbgp4PeerCapReceivedValue
OCTET STRING
}
fsbgp4PeerRemoteAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The remote IP Address of peer"
::= { fsbgp4CapReceivedCapsEntry 1 }
fsbgp4PeerCapReceivedCode OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"BGP-4 Capability Advertisement Capability Code that is received from peer."
::= { fsbgp4CapReceivedCapsEntry 2 }
fsbgp4PeerCapReceivedInstance OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Multiple instances of a given Capability may be received from
peer. This variable is used to index them."
::= { fsbgp4CapReceivedCapsEntry 3 }
fsbgp4PeerCapReceivedLength OBJECT-TYPE
SYNTAX Integer32 (0..251)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The length of Capability data received from peer"
::= { fsbgp4CapReceivedCapsEntry 4 }
fsbgp4PeerCapReceivedValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..251))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of Capability received from peer"
::= { fsbgp4CapReceivedCapsEntry 5 }
--- Accepted Capabilities Table
fsbgp4CapAcceptedCapsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4CapAcceptedCapsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Accepted Capabilities table which contains the Capabilities that are
received from peer and accepted by the speaker."
::= {fsbgpCaps 6 }
fsbgp4CapAcceptedCapsEntry OBJECT-TYPE
SYNTAX Fsbgp4CapAcceptedCapsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry contains the accepted Capabilities"
INDEX { fsbgp4CapAcceptedPeerRemAddr,
fsbgp4PeerCapAcceptedCode,
fsbgp4PeerCapAcceptedInstance
}
::= { fsbgp4CapAcceptedCapsTable 1 }
Fsbgp4CapAcceptedCapsEntry ::= SEQUENCE {
fsbgp4CapAcceptedPeerRemAddr
IpAddress,
fsbgp4PeerCapAcceptedCode
Integer32,
fsbgp4PeerCapAcceptedInstance
Integer32,
fsbgp4PeerCapAcceptedLength
Integer32,
fsbgp4PeerCapAcceptedValue
OCTET STRING
}
fsbgp4CapAcceptedPeerRemAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The remote IP Address of peer"
::= { fsbgp4CapAcceptedCapsEntry 1 }
fsbgp4PeerCapAcceptedCode OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"BGP-4 Capability Advertisement Capability Code that is received from peer
and supported by speaker."
::= { fsbgp4CapAcceptedCapsEntry 2 }
fsbgp4PeerCapAcceptedInstance OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Multiple instances of a given Capability may be received from
peer and accepted by speaker. This variable is used to index them."
::= { fsbgp4CapAcceptedCapsEntry 3 }
fsbgp4PeerCapAcceptedLength OBJECT-TYPE
SYNTAX Integer32 (0..251)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The length of accepted Capability data "
::= { fsbgp4CapAcceptedCapsEntry 4 }
fsbgp4PeerCapAcceptedValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..251))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of accepted Capability "
::= { fsbgp4CapAcceptedCapsEntry 5 }
-- MIB FOR FSBGP_CABILITIES end
-- MIB FOR FS_BGP_ASC STARTS
fsbgpAsc OBJECT IDENTIFIER ::= {fsbgp 15}
fsbgpAscScalars OBJECT IDENTIFIER ::= {fsbgpAsc 1}
fsbgpAscConfedId OBJECT-TYPE
SYNTAX Unsigned32 (0 .. 4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Local Confederation Identification number of
the AS confederation, a value of zero indicates the
absence of this value. The object fsbgp4LocalAs must be
configured prior to configuring this object.
If already set (to non-zero value), this value must be
reset to zero (represets absence of confed) before
reconfiguring confed id."
DEFVAL {0}
::= {fsbgpAscScalars 1}
fsbgpAscConfedBestPathCompareMED OBJECT-TYPE
SYNTAX INTEGER
{
set(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to compare MED among paths learned
from confed peers. if this object value is set and AS path
contains only AS_CONFED segments then then MED should be
compared if this object value is clear and sanitized path
has different left-most entry in AS path then MED should not
be compared"
DEFVAL {clear}
::= {fsbgpAscScalars 2}
fsbgpAscConfedPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsbgpAscConfedPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP peer confederation table, this table contains information
about the Member-ASs of the confederation"
::= { fsbgpAsc 2 }
fsbgpAscConfedPeerEntry OBJECT-TYPE
SYNTAX FsbgpAscConfedPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about a member-AS of the confederation."
INDEX {
fsbgpAscConfedPeerASNo
}
::= { fsbgpAscConfedPeerTable 1 }
FsbgpAscConfedPeerEntry ::= SEQUENCE {
fsbgpAscConfedPeerASNo
Unsigned32,
fsbgpAscConfedPeerStatus
INTEGER
}
fsbgpAscConfedPeerASNo OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local AS number of member-AS,
a value of zero indicates the absence of this value "
::= { fsbgpAscConfedPeerEntry 1 }
fsbgpAscConfedPeerStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable the member-AS.
Use disable, if member-AS entry needs to disabled,
Use enable, if member-AS entry needs to be enabled."
::= { fsbgpAscConfedPeerEntry 2 }
-- MIB FOR Route Refresh STARTS
fsbgp4RtRefresh OBJECT IDENTIFIER ::= {fsbgp 16}
-- Route Refresh Scalars
fsbgp4RtRefreshAllPeerInboundRequest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Setting this object triggers the sending of the Route Refresh message
to all the peers. This object will be cleared once the Route Refresh
message is sent to all the peers.Route-Refresh message support is a
default feature.If not negotiated via capability negotiation, inbound
soft-reconfig is performed internally on setting this object."
DEFVAL { false }
::= { fsbgp4RtRefresh 1 }
-- Route Refresh Inbound Table
fsbgp4RtRefreshInboundTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4RtRefreshInboundEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Route Refresh Inbound Table"
::= { fsbgp4RtRefresh 2 }
fsbgp4RtRefreshInboundEntry OBJECT-TYPE
SYNTAX Fsbgp4RtRefreshInboundEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry corresponds to Route Refresh Inbound."
INDEX {
fsbgp4RtRefreshInboundPeerType,
fsbgp4RtRefreshInboundPeerAddr
}
::= { fsbgp4RtRefreshInboundTable 1 }
Fsbgp4RtRefreshInboundEntry ::= SEQUENCE {
fsbgp4RtRefreshInboundPeerType
InetAddressType,
fsbgp4RtRefreshInboundPeerAddr
OCTET STRING,
fsbgp4RtRefreshInboundRequest
TruthValue
}
fsbgp4RtRefreshInboundPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Address Family Identifier of the peer remote address"
::= { fsbgp4RtRefreshInboundEntry 1 }
fsbgp4RtRefreshInboundPeerAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The IP address of the peeri for which the Route Refresh request has to
be issued."
::= { fsbgp4RtRefreshInboundEntry 2 }
fsbgp4RtRefreshInboundRequest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Setting this object triggers the sending of the Route Refresh message
to the peer. This object will be cleared once the Route Refresh message
is sent to the peer. Route-Refresh message support is a default feature
If not negotiated via capability negotiation, inbound soft-reconfig is
internally done on setting this object."
::= { fsbgp4RtRefreshInboundEntry 3 }
--
-- Route Refresh Statistics Table
--
fsbgp4RtRefreshStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4RtRefreshStatisticsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Route Refresh Statistics Table"
::= { fsbgp4RtRefresh 3 }
fsbgp4RtRefreshStatisticsEntry OBJECT-TYPE
SYNTAX Fsbgp4RtRefreshStatisticsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry gives the statistics of Route Refresh."
INDEX {
fsbgp4RtRefreshStatisticsPeerType,
fsbgp4RtRefreshStatisticsPeerAddr
}
::= { fsbgp4RtRefreshStatisticsTable 1 }
Fsbgp4RtRefreshStatisticsEntry ::= SEQUENCE {
fsbgp4RtRefreshStatisticsPeerType
InetAddressType,
fsbgp4RtRefreshStatisticsPeerAddr
OCTET STRING,
fsbgp4RtRefreshStatisticsRtRefMsgSentCntr
Counter32,
fsbgp4RtRefreshStatisticsRtRefMsgTxErrCntr
Counter32,
fsbgp4RtRefreshStatisticsRtRefMsgRcvdCntr
Counter32,
fsbgp4RtRefreshStatisticsRtRefMsgInvalidCntr
Counter32
}
fsbgp4RtRefreshStatisticsPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Address Family Identifier of the peer remote address."
::= { fsbgp4RtRefreshStatisticsEntry 1 }
fsbgp4RtRefreshStatisticsPeerAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The IP address of the peer for which the Route Refresh Statistics has
to be read."
::= { fsbgp4RtRefreshStatisticsEntry 2 }
fsbgp4RtRefreshStatisticsRtRefMsgSentCntr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
" The number of Route Refresh messages sent to the peer."
::= { fsbgp4RtRefreshStatisticsEntry 3 }
fsbgp4RtRefreshStatisticsRtRefMsgTxErrCntr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
" The number of Route Refresh messages that could not be
transmitted to the peer."
::= { fsbgp4RtRefreshStatisticsEntry 4 }
fsbgp4RtRefreshStatisticsRtRefMsgRcvdCntr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
" The number of Route Refresh messages received from the peer."
::= { fsbgp4RtRefreshStatisticsEntry 5 }
fsbgp4RtRefreshStatisticsRtRefMsgInvalidCntr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
" The number of invalid Route Refresh messages received from the peer."
::= { fsbgp4RtRefreshStatisticsEntry 6 }
-- MIB for TCP MD5 Authentication starts.
fsbgp4TCPMD5Auth OBJECT IDENTIFIER ::= {fsbgp 17}
-- TCP MD5 Authentication Table
fsbgp4TCPMD5AuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4TCPMD5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TCP MD5 Authientication Table"
::= { fsbgp4TCPMD5Auth 1 }
fsbgp4TCPMD5AuthEntry OBJECT-TYPE
SYNTAX Fsbgp4TCPMD5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry corresponds to the TCP MD5 authentication password."
INDEX {
fsbgp4TCPMD5AuthPeerType,
fsbgp4TCPMD5AuthPeerAddr
}
::= { fsbgp4TCPMD5AuthTable 1 }
Fsbgp4TCPMD5AuthEntry ::= SEQUENCE {
fsbgp4TCPMD5AuthPeerType
InetAddressType,
fsbgp4TCPMD5AuthPeerAddr
OCTET STRING,
fsbgp4TCPMD5AuthPassword
OCTET STRING,
fsbgp4TCPMD5AuthPwdSet
INTEGER
}
fsbgp4TCPMD5AuthPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address Family Identifier of the peer remote address."
::= { fsbgp4TCPMD5AuthEntry 1 }
fsbgp4TCPMD5AuthPeerAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1 .. 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the peer for which the TCP MD5 Authentication
Password has to be set.
to be read."
::= { fsbgp4TCPMD5AuthEntry 2 }
fsbgp4TCPMD5AuthPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The TCP MD5 Authentication Password that has to be sent with all TCP
packets originated from the peer."
::= { fsbgp4TCPMD5AuthEntry 3 }
fsbgp4TCPMD5AuthPwdSet OBJECT-TYPE
SYNTAX INTEGER
{
set (1),
clear (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates whether TCP MD5 password needs to be set/reset
for the peer. This object needs to be set before the object
fsbgp4TCPMD5AuthPassword can be set."
DEFVAL { clear }
::= { fsbgp4TCPMD5AuthEntry 4 }
-- MIB FOR OutBound Soft-Reconfig STARTS
fsbgp4SoftReconfigOut OBJECT IDENTIFIER ::= {fsbgp 18}
-- OutBound Soft-Reconfig Scalars
fsbgp4SoftReconfigAllPeerOutboundRequest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Setting this object triggers the outbound soft-reconfig process
for all peers. This object value is cleared once the soft-reconfig
(outbound) process is completed."
DEFVAL { false }
::= { fsbgp4SoftReconfigOut 1 }
-- Soft Re-config Outbound Table
fsbgp4SoftReconfigOutboundTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4SoftReconfigOutboundEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Soft Reconfig outbound Table"
::= { fsbgp4SoftReconfigOut 2 }
fsbgp4SoftReconfigOutboundEntry OBJECT-TYPE
SYNTAX Fsbgp4SoftReconfigOutboundEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry corresponds to Soft Reconfig outbound."
INDEX {
fsbgp4SoftReconfigOutboundPeerType,
fsbgp4SoftReconfigOutboundPeerAddr
}
::= { fsbgp4SoftReconfigOutboundTable 1 }
Fsbgp4SoftReconfigOutboundEntry ::= SEQUENCE {
fsbgp4SoftReconfigOutboundPeerType
InetAddressType,
fsbgp4SoftReconfigOutboundPeerAddr
OCTET STRING,
fsbgp4SoftReconfigOutboundRequest
TruthValue
}
fsbgp4SoftReconfigOutboundPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Address Family Identifier of the peer remote address"
::= { fsbgp4SoftReconfigOutboundEntry 1 }
fsbgp4SoftReconfigOutboundPeerAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1 .. 16))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The IP address of the peer for which the outbound soft-reconfig has to
be performed."
::= { fsbgp4SoftReconfigOutboundEntry 2 }
fsbgp4SoftReconfigOutboundRequest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Setting this object triggers the outbound soft-reconfig process for the peer. This object value is cleared once the soft-reconfig process is
completed."
::= { fsbgp4SoftReconfigOutboundEntry 3 }
--- Extensions to the fsbgp4 mib
--- Peer Table
fsbgp4MpeBgpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeBgpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP peer table. This table contains, one entry per BGP peer,
information about the connections with BGP peers."
::= { fsbgp 19 }
fsbgp4MpeBgpPeerEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeBgpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the connection with a BGP peer."
INDEX {
fsbgp4mpebgpPeerRemoteAddrType,
fsbgp4mpebgpPeerRemoteAddr
}
::= { fsbgp4MpeBgpPeerTable 1 }
Fsbgp4MpeBgpPeerEntry ::= SEQUENCE {
fsbgp4mpebgpPeerRemoteAddrType
InetAddressType,
fsbgp4mpebgpPeerIdentifier
InetAddress,
fsbgp4mpebgpPeerState
INTEGER,
fsbgp4mpebgpPeerAdminStatus
INTEGER,
fsbgp4mpebgpPeerNegotiatedVersion
Integer32,
fsbgp4mpebgpPeerLocalAddr
InetAddress,
fsbgp4mpebgpPeerLocalPort
Integer32,
fsbgp4mpebgpPeerRemoteAddr
InetAddress,
fsbgp4mpebgpPeerRemotePort
Integer32,
fsbgp4mpebgpPeerRemoteAs
Unsigned32,
fsbgp4mpebgpPeerInUpdates
Counter32,
fsbgp4mpebgpPeerOutUpdates
Counter32,
fsbgp4mpebgpPeerInTotalMessages
Counter32,
fsbgp4mpebgpPeerOutTotalMessages
Counter32,
fsbgp4mpebgpPeerLastError
OCTET STRING,
fsbgp4mpebgpPeerFsmEstablishedTransitions
Counter32,
fsbgp4mpebgpPeerFsmEstablishedTime
Gauge32,
fsbgp4mpebgpPeerConnectRetryInterval
Integer32,
fsbgp4mpebgpPeerHoldTime
Integer32,
fsbgp4mpebgpPeerKeepAlive
Integer32,
fsbgp4mpebgpPeerHoldTimeConfigured
Integer32,
fsbgp4mpebgpPeerKeepAliveConfigured
Integer32,
fsbgp4mpebgpPeerMinASOriginationInterval
Integer32,
fsbgp4mpebgpPeerMinRouteAdvertisementInterval
Integer32,
fsbgp4mpebgpPeerInUpdateElapsedTime
Gauge32,
fsbgp4mpebgpPeerEndOfRIBMarkerSentStatus
INTEGER,
fsbgp4mpebgpPeerEndOfRIBMarkerReceivedStatus
INTEGER,
fsbgp4mpebgpPeerRestartMode
INTEGER,
fsbgp4mpePeerRestartTimeInterval
Integer32,
fsbgp4mpePeerAllowAutomaticStart
INTEGER,
fsbgp4mpePeerAllowAutomaticStop
INTEGER,
fsbgp4mpebgpPeerIdleHoldTimeConfigured
Integer32,
fsbgp4mpeDampPeerOscillations
INTEGER,
fsbgp4mpePeerDelayOpen
INTEGER,
fsbgp4mpebgpPeerDelayOpenTimeConfigured
Integer32,
fsbgp4mpePeerPrefixUpperLimit
Integer32,
fsbgp4mpePeerTcpConnectRetryCnt
Integer32,
fsbgp4mpePeerTcpCurrentConnectRetryCnt
Integer32,
fsbgp4mpeIsPeerDamped
INTEGER,
fsbgp4mpePeerSessionAuthStatus
INTEGER,
fsbgp4mpePeerTCPAOKeyIdInUse
Integer32,
fsbgp4mpePeerTCPAOAuthNoMKTDiscard
INTEGER,
fsbgp4mpePeerTCPAOAuthICMPAccept
INTEGER,
fsbgp4mpePeerIpPrefixNameIn
DisplayString,
fsbgp4mpePeerIpPrefixNameOut
DisplayString
}
fsbgp4mpebgpPeerRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of the remote peer"
::= { fsbgp4MpeBgpPeerEntry 1 }
fsbgp4mpebgpPeerIdentifier OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of this entry's BGP peer."
::= { fsbgp4MpeBgpPeerEntry 2 }
fsbgp4mpebgpPeerState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connect(2),
active(3),
opensent(4),
openconfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP peer connection state."
::= { fsbgp4MpeBgpPeerEntry 3 }
fsbgp4mpebgpPeerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
stop(1),
start(2),
auto-start(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the BGP connection. A transition from
'stop' to 'start' will cause the BGP Start Event to be generated.
A transition from 'start' to 'stop' will cause the BGP Stop
Event to be generated. This parameter can be used to restart BGP
peer connections. Whenever the 'fsbgp4mpePeerAllowAutomaticStart' is
enabled, 'fsbgp4mpebgpPeerAdminStatus' will take the value 'auto-start'.
The peer waits till the IdleHold Timer expires, and then it will
proceed to generate the BGP Start Event. 'fsbgp4mpebgpPeerAdminStatus'
takes the value 'stop' under two circumstances:
1) Whenever the administrator manually triggers BGP Stop Event.
2) Whenever the 'fsbgp4mpePeerAllowAutomaticStop' is enabled and also if
the IdleHold Timer exceeds its Maximum Threshold value, then BGP Stop
Event is issued automatically, without the manual intervention of the
administrator.
Care should be used in providing write access
to this object without adequate authentication."
::= { fsbgp4MpeBgpPeerEntry 4 }
fsbgp4mpebgpPeerNegotiatedVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated version of BGP running between the two peers."
::= { fsbgp4MpeBgpPeerEntry 5 }
fsbgp4mpebgpPeerLocalAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local IP address of this entry's BGP connection."
::= { fsbgp4MpeBgpPeerEntry 6 }
fsbgp4mpebgpPeerLocalPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port for the TCP connection between the BGP peers."
::= { fsbgp4MpeBgpPeerEntry 7 }
fsbgp4mpebgpPeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The remote IP address of this entry's BGP peer."
::= { fsbgp4MpeBgpPeerEntry 8 }
fsbgp4mpebgpPeerRemotePort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port for the TCP connection between the BGP peers.
Note that the objects bgpPeerLocalAddr, bgpPeerLocalPort,
bgpPeerRemoteAddr and bgpPeerRemotePort provide the appropriate
reference to the standard MIB TCP connection table."
::= { fsbgp4MpeBgpPeerEntry 9 }
fsbgp4mpebgpPeerRemoteAs OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote autonomous system number."
::= { fsbgp4MpeBgpPeerEntry 10 }
fsbgp4mpebgpPeerInUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages received on this connection.
This object should be initialized to zero (0) when the connection
is established."
::= { fsbgp4MpeBgpPeerEntry 11 }
fsbgp4mpebgpPeerOutUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages transmitted on this connection.
This object should be initialized to zero (0) when the connection
is established."
::= { fsbgp4MpeBgpPeerEntry 12 }
fsbgp4mpebgpPeerInTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received from the remote peer on this
connection. This object should be initialized to zero when the
connection is established."
::= { fsbgp4MpeBgpPeerEntry 13 }
fsbgp4mpebgpPeerOutTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages transmitted to the remote peer on
this connection. This object should be initialized to zero when
the connection is established."
::= { fsbgp4MpeBgpPeerEntry 14 }
fsbgp4mpebgpPeerLastError OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code and subcode seen by this peer on this connection.
If no error has occurred, this field is zero. Otherwise, the first
byte of this two byte OCTET STRING contains the error code, and the
second byte contains the subcode."
::= { fsbgp4MpeBgpPeerEntry 15 }
fsbgp4mpebgpPeerFsmEstablishedTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the BGP FSM transitioned into the
established state."
::= { fsbgp4MpeBgpPeerEntry 16 }
fsbgp4mpebgpPeerFsmEstablishedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This timer indicates how long (in seconds) this peer has been in the
Established state or how long since this peer was last in the
Established state. It is set to zero when a new peer is configured
or the router is booted."
::= { fsbgp4MpeBgpPeerEntry 17 }
fsbgp4mpebgpPeerConnectRetryInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the ConnectRetry timer. The suggested
value for this timer is 120 seconds."
::= { fsbgp4MpeBgpPeerEntry 18 }
fsbgp4mpebgpPeerHoldTime OBJECT-TYPE
SYNTAX Integer32 ( 0 | 3..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold Timer established with the
peer. The value of this object is calculated by this BGP speaker
by using the smaller of the value in bgpPeerHoldTimeConfigured and
the Hold Time received in the OPEN message. This value must be at
lease three seconds if it is not zero (0) in which case the Hold
Timer has not been established with the peer, or, the value of
bgpPeerHoldTimeConfigured is zero (0)."
::= { fsbgp4MpeBgpPeerEntry 19 }
fsbgp4mpebgpPeerKeepAlive OBJECT-TYPE
SYNTAX Integer32 ( 0 | 1..21845 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer established with
the peer. The value of this object is calculated by this BGP
speaker such that, when compared with bgpPeerHoldTime, it has the
same proportion as what bgpPeerKeepAliveConfigured has when compared
with bgpPeerHoldTimeConfigured. If the value of this object is
zero (0), it indicates that the KeepAlive timer has not been
established with the peer, or, the value of bgpPeerKeepAliveConfigured
is zero (0)."
::= { fsbgp4MpeBgpPeerEntry 20 }
fsbgp4mpebgpPeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Integer32 ( 0 | 3..65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold Time configured for this
BGP speaker with this peer. This value is placed in an OPEN
message sent to this peer by this BGP speaker, and is compared
with the Hold Time field in an OPEN message received from the peer
when determining the Hold Time (bgpPeerHoldTime) with the peer.
This value must not be less than three seconds if it is not zero (0)
in which case the Hold Time is NOT to be established with the peer.
The suggested value for this timer is 90 seconds."
::= { fsbgp4MpeBgpPeerEntry 21 }
fsbgp4mpebgpPeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Integer32 ( 0 | 1..21845 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the
KeepAlive timer configured for this BGP
speaker with this peer. The value of this
object will only determine the
KEEPALIVE messages' frequency relative to
the value specified in
bgpPeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages
is indicated by bgpPeerKeepAlive. A
reasonable maximum value for this timer
would be configured to be one
third of that of
bgpPeerHoldTimeConfigured.
If the value of this object is zero (0),
now periodical KEEPALIVE messages are sent
to the peer after the BGP connection has
been established. The suggested value for
this timer is 30 seconds."
::= { fsbgp4MpeBgpPeerEntry 22 }
fsbgp4mpebgpPeerMinASOriginationInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinASOriginationInterval timer.
The suggested value for this timer is 15
seconds."
::= { fsbgp4MpeBgpPeerEntry 23 }
fsbgp4mpebgpPeerMinRouteAdvertisementInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30
seconds."
::= { fsbgp4MpeBgpPeerEntry 24 }
fsbgp4mpebgpPeerInUpdateElapsedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed time in seconds since the last BGP
UPDATE message was received from the peer.
Each time bgpPeerInUpdates is incremented,
the value of this object is set to zero
(0)."
::= { fsbgp4MpeBgpPeerEntry 25 }
fsbgp4mpebgpPeerEndOfRIBMarkerSentStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- if GR capability is not enabled
true(1),-- End-Of-RIB marker not sent to peer
false(2) -- End-Of-RIB marker sent to peer
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates that whether the End-Of-RIB marker sent to peer or not"
::= { fsbgp4MpeBgpPeerEntry 26 }
fsbgp4mpebgpPeerEndOfRIBMarkerReceivedStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),-- If GR capability is not enabled
true(1),-- End-Of-RIB marker not received from peer
false(2) -- End-Of-RIB marker received from peer
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates that whether the End-Of-RIB marker received from peer or not"
::= { fsbgp4MpeBgpPeerEntry 27 }
fsbgp4mpebgpPeerRestartMode OBJECT-TYPE
SYNTAX INTEGER {
restarting (1),
receiving (2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the peer BGP speaker is restarting speaker or receiving speaker or not having GR capability"
::= { fsbgp4MpeBgpPeerEntry 28 }
fsbgp4mpePeerRestartTimeInterval OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the time (in seconds) received from peer through GR capability of open message. This is used in receiving speaker to make sure that the restarting speaker restarted within this interval"
::= { fsbgp4MpeBgpPeerEntry 29 }
fsbgp4mpePeerAllowAutomaticStart OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object specifies whether BGP session with the associated peer
can be started automatically. This object when set to 'disabled',
requires manual start for initiating BGP session with the peer via
MIB object 'fsbgp4mpebgpPeerAdminStatus'. When set to 'enabled',
the peer session can be automatically started in the IDLE state,
after a BGP Peer session is brought down either by Autostop or via
reception of invalid BGP message. The BGP session will be automatically
started after an interval specified by
'fsbgp4mpebgpPeerIdleHoldTimeConfigured'. If
fsbgp4mpeDampPeerOscillations is enabled, then automaticStart will not
occur if peer is damped."
DEFVAL { disable }
::= { fsbgp4MpeBgpPeerEntry 30 }
fsbgp4mpePeerAllowAutomaticStop OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This MIB object specifies whether a BGP connection needs to be
automatically stopped after a TCP connect-retry count value specified
by MIB object 'fsbgp4mpePeerTcpConnectRetryCnt'. The resources
allocated for the BGP peer are released and it continues to remain in
IDLE state. After an automatic stop, the Peer connection needs to be
re-intiated manually by the administrator. When AutomaticStop is
disabled, the connect retry count value is set to 0."
DEFVAL { disable }
::= { fsbgp4MpeBgpPeerEntry 31 }
fsbgp4mpebgpPeerIdleHoldTimeConfigured OBJECT-TYPE
SYNTAX Integer32 ( 1..65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IdleHoldTime specifies the length of time the BGP peer is held in the
Idle state prior to allowing the next automatic restart.
The IdleHoldTime is configured only when the
fsbgp4mpePeerAllowAutomaticStart is Enabled or when the
fsbgp4mpeDampPeerOscillations is Enabled. The configurable value
differs based on the two options that are enabled.The Suggested default
value is 60 secs for automatic start and after each dampening, the value
of the IdleHoldTime is doubled consecutively."
DEFVAL { 60 }
::= { fsbgp4MpeBgpPeerEntry 32 }
fsbgp4mpeDampPeerOscillations OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DampPeerOscillations option specifies that the implementation
engages additional logic to damp the oscillations of BGP peers in
the face of series of automatic start and automatic stop operations
in the IDLE state.The DampPeerOscillations option indicates that the
BGP connection is using logic that damps BGP peer oscillations in
states other than 'established' state."
DEFVAL { disable }
::= { fsbgp4MpeBgpPeerEntry 33 }
fsbgp4mpePeerDelayOpen OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object allows configuration option to enable/disable delay
in sending of OPEN messages to the BGP peer for a specific time period
(DelayOpenTime). The delay allows the remote BGP Peer to send the first
OPEN message."
DEFVAL { disable }
::= { fsbgp4MpeBgpPeerEntry 34 }
fsbgp4mpebgpPeerDelayOpenTimeConfigured OBJECT-TYPE
SYNTAX Integer32 ( 0..65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DelayOpen time specifies the amount of time the BGP Peer should
delay in sending the OPEN message to the remote peer. If the
fsbgp4mpePeerDelayOpen option is enabled, the DelayOpen time can bei
configured. The default value is kept as 0 secs, which implies thati
the BGP Peer can send an OPEN message without any delay to its
neighbor."
DEFVAL { 0 }
::= { fsbgp4MpeBgpPeerEntry 35 }
fsbgp4mpePeerPrefixUpperLimit OBJECT-TYPE
SYNTAX Integer32 (1..5000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP speaker imposes a locally-configured, upper bound on the number of
address prefixes the speaker is willing to accept from a neighbor. The
default value is calculated as the following:
fsbgp4MaxNoofRoutes / fsbgp4MaxPeerEntry
Administrator can configure a value less than the default value at
runtime. Prefixes exceeding the PrefixUpperLimit will not be processedi
by the system."
DEFVAL { 100 }
::= {fsbgp4MpeBgpPeerEntry 36}
fsbgp4mpePeerTcpConnectRetryCnt OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This counter denotes the Maximum number of times the BGP Peer has
tried to issue a TCP-Connect with its neighboring peers.
The default value for the counter is set as 5."
DEFVAL { 5 }
::= {fsbgp4MpeBgpPeerEntry 37}
fsbgp4mpePeerTcpCurrentConnectRetryCnt OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This counter denotes the number of times the BGP Peer has tried to
issue a TCP-Connect with its neighboring peers. It is an internal value.
It increments for each Autostop event. If the
'fsbgp4mpePeerTcpCurrentConnectRetryCnt' exceeds the
'fsbgp4mpePeerTcpConnectRetryCnt' value, PeerDampening is performed,
provided the corresponding flag is enabled."
::= {fsbgp4MpeBgpPeerEntry 38}
fsbgp4mpeIsPeerDamped OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object specifies the PeerDamped Status. If it is enabled, it
denotes that the peer is in damped state. If it is disabled, it
denotes that either the peer has recovered from the damped state or not
entered into the Damped state. If enabled and if the IdleHold Timer
Threshold value is exceeded, issue Manual Stop, reset the
fsbgp4mpePeerTcpCurrentConnectRetryCnt value to zero and disable the
fsbgp4mpePeerAllowAutomaticStart."
DEFVAL { disable }
::= { fsbgp4MpeBgpPeerEntry 39 }
fsbgp4mpePeerSessionAuthStatus OBJECT-TYPE
SYNTAX INTEGER {
no-session (1),
authenticatedMd5 (2),
unauthenticated (3),
authenticatedTcpAo (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether peer-session is TCP MD5/TCP-AO
authenticated or not. If no session is established yet, its value is
no-session"
::= { fsbgp4MpeBgpPeerEntry 40 }
fsbgp4mpePeerTCPAOKeyIdInUse OBJECT-TYPE
SYNTAX Integer32 (0 .. 255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Key id of the MKT which is used by the TCP session of the peer,
this field will be valid only when value of
fsbgp4mpePeerSessionAuthStatus is authenticated-tcp-ao"
::= { fsbgp4MpeBgpPeerEntry 41 }
fsbgp4mpePeerTCPAOAuthNoMKTDiscard OBJECT-TYPE
SYNTAX INTEGER
{
accept (1),
discard (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Discard packet for the peer, if packets are received with TCP-AO
and no matching MKT is found, default value is accept"
DEFVAL { accept }
::= { fsbgp4MpeBgpPeerEntry 42 }
fsbgp4mpePeerTCPAOAuthICMPAccept OBJECT-TYPE
SYNTAX INTEGER
{
accept (1),
ignore (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Accept ICMPv4 type 3 & ICMPv6 type 1 messages for the TCP-AO
authenticated peer, default value is ignore"
DEFVAL { ignore }
::= { fsbgp4MpeBgpPeerEntry 43 }
fsbgp4mpePeerIpPrefixNameIn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the IP Prefix list name in IN direction for this peer entry."
::= { fsbgp4MpeBgpPeerEntry 44 }
fsbgp4mpePeerIpPrefixNameOut OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the IP Prefix list name in OUT direction for this peer entry."
::= { fsbgp4MpeBgpPeerEntry 45 }
-- BGP4 Received Path Attribute Table. This table
-- contains, one entry per path to a network, path
-- attributes received from all peers running BGP-4.
fsbgp4MpeBgp4PathAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeBgp4PathAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Received Path Attribute Table
contains information about paths to
destination networks received from all
BGP4 peers."
::= { fsbgp 20 }
fsbgp4MpeBgp4PathAttrEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeBgp4PathAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a path to a network."
INDEX { fsbgp4mpebgp4PathAttrRouteAfi,
fsbgp4mpebgp4PathAttrRouteSafi,
fsbgp4mpebgp4PathAttrIpAddrPrefix,
fsbgp4mpebgp4PathAttrIpAddrPrefixLen,
fsbgp4mpebgp4PathAttrPeerType,
fsbgp4mpebgp4PathAttrPeer
}
::= { fsbgp4MpeBgp4PathAttrTable 1 }
Fsbgp4MpeBgp4PathAttrEntry ::= SEQUENCE {
fsbgp4mpebgp4PathAttrRouteAfi
InetAddressType,
fsbgp4mpebgp4PathAttrRouteSafi
BgpSafi,
fsbgp4mpebgp4PathAttrPeerType
InetAddressType,
fsbgp4mpebgp4PathAttrPeer
InetAddress,
fsbgp4mpebgp4PathAttrIpAddrPrefixLen
Integer32,
fsbgp4mpebgp4PathAttrIpAddrPrefix
InetAddress,
fsbgp4mpebgp4PathAttrOrigin
INTEGER,
fsbgp4mpebgp4PathAttrASPathSegment
OCTET STRING,
fsbgp4mpebgp4PathAttrNextHop
InetAddress,
fsbgp4mpebgp4PathAttrMultiExitDisc
Integer32,
fsbgp4mpebgp4PathAttrLocalPref
Integer32,
fsbgp4mpebgp4PathAttrAtomicAggregate
INTEGER,
fsbgp4mpebgp4PathAttrAggregatorAS
Unsigned32,
fsbgp4mpebgp4PathAttrAggregatorAddr
IpAddress,
fsbgp4mpebgp4PathAttrCalcLocalPref
Integer32,
fsbgp4mpebgp4PathAttrBest
INTEGER,
fsbgp4mpebgp4PathAttrCommunity
OCTET STRING,
fsbgp4mpebgp4PathAttrOriginatorId
OCTET STRING,
fsbgp4mpebgp4PathAttrClusterList
OCTET STRING,
fsbgp4mpebgp4PathAttrExtCommunity
OCTET STRING,
fsbgp4mpebgp4PathAttrUnknown
OCTET STRING,
fsbgp4mpebgp4PathAttrLabel
OCTET STRING,
fsbgp4mpebgp4PathAttrAS4PathSegment
OCTET STRING,
fsbgp4mpebgp4PathAttrAggregatorAS4
Unsigned32
}
fsbgp4mpebgp4PathAttrRouteAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The AFI of the prefix"
::= { fsbgp4MpeBgp4PathAttrEntry 1 }
fsbgp4mpebgp4PathAttrRouteSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SAFI of the prefix"
::= { fsbgp4MpeBgp4PathAttrEntry 2 }
fsbgp4mpebgp4PathAttrPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The AFI of the peer"
::= { fsbgp4MpeBgp4PathAttrEntry 3 }
fsbgp4mpebgp4PathAttrPeer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the peer where the path
information was learned."
::= { fsbgp4MpeBgp4PathAttrEntry 4 }
fsbgp4mpebgp4PathAttrIpAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Length in bits of the IP address prefix
in the Network Layer Reachability
Information field."
::= { fsbgp4MpeBgp4PathAttrEntry 5 }
fsbgp4mpebgp4PathAttrIpAddrPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
bgp4PathAttrIpAddrPrefixLen.
Any bits beyond the length specified by
bgp4PathAttrIpAddrPrefixLen are zeroed."
::= { fsbgp4MpeBgp4PathAttrEntry 6 }
fsbgp4mpebgp4PathAttrOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(1),-- networks are interior
egp(2),-- networks learned via EGP
incomplete(3) -- undetermined
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ultimate origin of the path
information."
::= { fsbgp4MpeBgp4PathAttrEntry 7 }
fsbgp4mpebgp4PathAttrASPathSegment OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.
The type is a 1-octet field which has two
possible values:
1 AS_SET: unordered set of ASs, traversed by a
route in the UPDATE message.
2 AS_SEQUENCE: ordered set of ASs, traversed by
a route in the UPDATE message.
The length is a 1-octet field containing the
number of ASs in the value field.
The value field contains one or more AS
numbers, each AS is represented in the octet
string as a pair of octets according to the
following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255;"
::= { fsbgp4MpeBgp4PathAttrEntry 8 }
fsbgp4mpebgp4PathAttrNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the border router that
should be used for the destination network."
::= { fsbgp4MpeBgp4PathAttrEntry 9 }
fsbgp4mpebgp4PathAttrMultiExitDisc OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This metric is used to discriminate
between multiple exit points to an
adjacent autonomous system. A value of -1
indicates the absence of this attribute."
::= { fsbgp4MpeBgp4PathAttrEntry 10 }
fsbgp4mpebgp4PathAttrLocalPref OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The originating BGP4 speaker's degree of
preference for an advertised route. A
value of -1 indicates the absence of this
attribute."
::= { fsbgp4MpeBgp4PathAttrEntry 11 }
fsbgp4mpebgp4PathAttrAtomicAggregate OBJECT-TYPE
SYNTAX INTEGER {
lessSpecificRrouteNotSelected(1),
lessSpecificRouteSelected(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the local system has
selected a less specific route without
selecting a more specific route."
::= { fsbgp4MpeBgp4PathAttrEntry 12 }
fsbgp4mpebgp4PathAttrAggregatorAS OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute."
::= { fsbgp4MpeBgp4PathAttrEntry 13 }
fsbgp4mpebgp4PathAttrAggregatorAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last BGP4 speaker
that performed route aggregation. A value
of 0.0.0.0 indicates the absence of this
attribute."
::= { fsbgp4MpeBgp4PathAttrEntry 14 }
fsbgp4mpebgp4PathAttrCalcLocalPref OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The degree of preference calculated by the
receiving BGP4 speaker for an advertised
route. A value of -1 indicates the
absence of this attribute."
::= { fsbgp4MpeBgp4PathAttrEntry 15 }
fsbgp4mpebgp4PathAttrBest OBJECT-TYPE
SYNTAX INTEGER {
nonbest(1),-- not chosen as best route
best(2), -- chosen as best route
stale(3) -- chosen as stale route
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not this route
was chosen as the best BGP4 route."
::= { fsbgp4MpeBgp4PathAttrEntry 16 }
fsbgp4mpebgp4PathAttrCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..800))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The community values received for this destinatin
from the peer"
::= { fsbgp4MpeBgp4PathAttrEntry 17 }
fsbgp4mpebgp4PathAttrOriginatorId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Originator-ID identifying the router that initially
advertised this destination to a Route Reflector.
A value of 0.0.0.0 indicates the absence of this attribute"
REFERENCE
"This attribute is defined in [RFC 2796]"
::= { fsbgp4MpeBgp4PathAttrEntry 18 }
fsbgp4mpebgp4PathAttrClusterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4096))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sequence of four octet long values Cluster-IDs representing
the reflection path that the route has passed. Each four octet
long value represents the ID of a cluster that the route has
traversed. A length of zero (0) indicates the absence of this
attibute."
REFERENCE
"This attribute is defined in [RFC 2796]"
::= { fsbgp4MpeBgp4PathAttrEntry 19 }
fsbgp4mpebgp4PathAttrExtCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..800))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The extended community values received for this
destinatin from the peer"
::= { fsbgp4MpeBgp4PathAttrEntry 20 }
fsbgp4mpebgp4PathAttrUnknown OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One or more path attributes not understood
by this BGP4 speaker. Size zero (0)
indicates the absence of such
attribute(s). Octets beyond the maximum
size, if any, are not recorded by this
object."
::= { fsbgp4MpeBgp4PathAttrEntry 21 }
fsbgp4mpebgp4PathAttrLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MPLS Label received for this destination from the peer "
::= { fsbgp4MpeBgp4PathAttrEntry 22 }
fsbgp4mpebgp4PathAttrAS4PathSegment OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.
The type is a 1-octet field which has two
possible values:
1 AS_SET: unordered set of ASs, traversed by a
route in the UPDATE message.
2 AS_SEQUENCE: ordered set of ASs, traversed by
a route in the UPDATE message.
The length is a 1-octet field containing the
number of ASs in the value field.
The value field contains one or more AS
numbers, each AS is represented in the octet
string as 2 pairs of octets."
REFERENCE
"This attribute is defined in [RFC 6793]"
::= { fsbgp4MpeBgp4PathAttrEntry 23 }
fsbgp4mpebgp4PathAttrAggregatorAS4 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 4 Byte AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute."
REFERENCE
"This attribute is defined in [RFC 6793]"
::= { fsbgp4MpeBgp4PathAttrEntry 24 }
-- MIB FOR FSBGP_PEER_EXTENSIONS_TABLE BEGIN
-- This table is an Extension to the bgpPeerTable from stdbgp4.mib.
-- This table contains, one entry per BGP peer, information
-- about the BGP peer.
fsbgp4MpePeerExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpePeerExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP Peer Extension Table. The entries in the table specifies
the additional features supported for a peer by futureBGP4
Speaker in addition to the features specified as in bgpPeerTable
(described in stdbgp4.mib.). All entries in this table can be
configured only if fsbgp4LocalAs has be configured."
::= { fsbgp 21 }
fsbgp4MpePeerExtEntry OBJECT-TYPE
SYNTAX Fsbgp4MpePeerExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the additional features supported
for a peer by futureBGP4 Speaker."
INDEX {fsbgp4mpePeerExtPeerType,
fsbgp4mpePeerExtPeerRemoteAddr }
::= { fsbgp4MpePeerExtTable 1 }
Fsbgp4MpePeerExtEntry ::= SEQUENCE {
fsbgp4mpePeerExtPeerType
InetAddressType,
fsbgp4mpePeerExtPeerRemoteAddr
InetAddress,
fsbgp4mpePeerExtConfigurePeer
INTEGER,
fsbgp4mpePeerExtPeerRemoteAs
Unsigned32,
fsbgp4mpePeerExtEBGPMultiHop
INTEGER,
fsbgp4mpePeerExtEBGPHopLimit
Integer32,
fsbgp4mpePeerExtNextHopSelf
INTEGER,
fsbgp4mpePeerExtRflClient
INTEGER,
fsbgp4mpePeerExtTcpSendBufSize
Integer32,
fsbgp4mpePeerExtTcpRcvBufSize
Integer32,
fsbgp4mpePeerExtLclAddress
InetAddress,
fsbgp4mpePeerExtNetworkAddress
InetAddress,
fsbgp4mpePeerExtGateway
InetAddress,
fsbgp4mpePeerExtCommSendStatus
INTEGER,
fsbgp4mpePeerExtECommSendStatus
INTEGER,
fsbgp4mpePeerExtPassive
INTEGER,
fsbgp4mpePeerExtDefaultOriginate
INTEGER,
fsbgp4mpePeerExtActivateMPCapability
INTEGER,
fsbgp4mpePeerExtDeactivateMPCapability
INTEGER,
fsbgp4mpePeerExtMplsVpnVrfAssociated
DisplayString,
fsbgp4mpePeerExtMplsVpnCERouteTargetAdvt
INTEGER,
fsbgp4mpePeerExtMplsVpnCESiteOfOrigin
DisplayString
}
fsbgp4mpePeerExtPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Type of the remote peer "
::= { fsbgp4MpePeerExtEntry 1 }
fsbgp4mpePeerExtPeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The remote IP address of this entry's BGP peer."
::= { fsbgp4MpePeerExtEntry 2 }
fsbgp4mpePeerExtConfigurePeer OBJECT-TYPE
SYNTAX INTEGER
{
create (1),
delete (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create or delete a peer. If called with create
and no matching peer exists, then a new peer entry will be created. The
admin status of this newly created peer will be stop. To enable the peer
set the peers remote AS (fsbgp4mpePeerExtPeerRemoteAS)and change the peer's
admin state (bgpPeerAdminState in stdbgp4.mib) to start. If this object
is called with create and a matching peer exists, then no action is done.
If called with delete and if a matching peer exists, then the complete
instance associated with that peer will be deleted."
::= { fsbgp4MpePeerExtEntry 3 }
fsbgp4mpePeerExtPeerRemoteAs OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote autonomous system number of the Peer. The peer admin status
can be made up only if this object is configured for a valid AS number.
When OPEN message is received from this peer during the BGP Connection
establishment, this configured AS value is compared against the AS number
received in the OPEN message. If both matches, then connection
establishment continues. If there is any mismatch, then the connection is
terminated. This object can be set only when the peer's admin status is
down."
::= { fsbgp4MpePeerExtEntry 4 }
fsbgp4mpePeerExtEBGPMultiHop OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected. By default, only directly connected EBGP peers are allowed.
For the internal peers, this object has no effect."
DEFVAL { disable }
::= { fsbgp4MpePeerExtEntry 5 }
fsbgp4mpePeerExtEBGPHopLimit OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected and seperated by a maximum hop limit as configured by this
object. For the internal peers, this object has no effect."
DEFVAL { 1 }
::= { fsbgp4MpePeerExtEntry 6 }
fsbgp4mpePeerExtNextHopSelf OBJECT-TYPE
SYNTAX INTEGER
{
automatic(1),
self(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies how the next hop attribute sent in the update
messages to this peer has to be generated. When the object takes the
value of self,the next Hop attribute will always be the sender Local
Address else the next hop will be generated based on the IP address of
the destination and the present next hop in the route information."
DEFVAL { automatic }
::= { fsbgp4MpePeerExtEntry 7 }
fsbgp4mpePeerExtRflClient OBJECT-TYPE
SYNTAX INTEGER
{
nonClient (1),
client (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the peer is Client peer or Non-Client
peer. By default, the peer is created as Non-Client Peer."
DEFVAL {1}
::= {fsbgp4MpePeerExtEntry 8 }
fsbgp4mpePeerExtTcpSendBufSize OBJECT-TYPE
SYNTAX Integer32 (4096..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the tcp window size on the sender side."
DEFVAL { 65536 }
::= { fsbgp4MpePeerExtEntry 9 }
fsbgp4mpePeerExtTcpRcvBufSize OBJECT-TYPE
SYNTAX Integer32 (4096..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the tcp window size on the receiver side."
DEFVAL { 65536 }
::= { fsbgp4MpePeerExtEntry 10 }
fsbgp4mpePeerExtLclAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies which address should be used as the source address
of the TCP session initiated with the Peer. By default this object takes
value as 0 and the source address of the TCP session is filled by TCP.
This object can take value of any interface address. If this object
refers to a valid interface address, then the TCP session initiated
with the peer should have this interface address as the source address."
::= { fsbgp4MpePeerExtEntry 11 }
fsbgp4mpePeerExtNetworkAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the remote peer's network address. TCP connection is
established using the peer's remote-address. If the peer's remote-address
is a IPv4 address, the peer's network address carries the IPv6 network
address. Similarly, if the peer's remote-address is a IPv6 address, the
peer's network address carries the IPv4 network address. This object can
be configured only after the peer's remote-address and the corresponding
local interface are configured."
::= { fsbgp4MpePeerExtEntry 12 }
fsbgp4mpePeerExtGateway OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the gateway router's address that will be used as
nexthop in the routes advertised to the peer. This ensures that the
traffic coming from this peer is routed through this gateway."
::= { fsbgp4MpePeerExtEntry 13 }
fsbgp4mpePeerExtCommSendStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
send (2),
donotsend (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Community Send status of the peer.
o none - is for read-only
o send - send communities to this peer
o donotsend - do not send communities to this peer."
DEFVAL { send }
::= { fsbgp4MpePeerExtEntry 14 }
fsbgp4mpePeerExtECommSendStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
send (2),
donotsend (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Extended Community Send status of the peer.
o none - is for read-only
o send - send extended communities to this peer
o donotsend - do not send extended communities to this peer."
DEFVAL { send }
::= { fsbgp4MpePeerExtEntry 15 }
fsbgp4mpePeerExtPassive OBJECT-TYPE
SYNTAX INTEGER
{
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set a peer connection to be passive, that means
the speaker will not initiate the session with that peer instead it
waits for the remote peer to initiate the session"
::= { fsbgp4MpePeerExtEntry 16 }
fsbgp4mpePeerExtDefaultOriginate OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to enable/disable the advertisement of the default
route to the peer. This object overrides the global default
route configuration (fsbgp4DefaultOriginate) and always send a default
route to the peer with self next-hop. This advertisement occurs
irrespective of the presence of default route in FDB. This object can
be set only if the fsbgp4LocalAs is set."
DEFVAL { disable }
::= { fsbgp4MpePeerExtEntry 17 }
fsbgp4mpePeerExtActivateMPCapability OBJECT-TYPE
SYNTAX INTEGER
{
ipv4unicast(1),
ipv6unicast(2),
vpnv4unicast(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is set to activate the corresponding MP Capability.
If any of MP Capability is activate, then this capability should
be negotiated while establishing session with this neighbor.
Any get on this object will return only ZERO."
::= { fsbgp4MpePeerExtEntry 18 }
fsbgp4mpePeerExtDeactivateMPCapability OBJECT-TYPE
SYNTAX INTEGER
{
ipv4unicast(1),
ipv6unicast(2),
vpnv4unicast(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is set to deactivate the corresponding MP Capability.
If any of MP Capability is deactivate, then this capability should
not be negotiated while establishing session with this neighbor.
Any get on this object will return only ZERO."
::= { fsbgp4MpePeerExtEntry 19 }
fsbgp4mpePeerExtMplsVpnVrfAssociated OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the VRF associated with the CE peer. If the Vrf Name
is not configured, the peer will be normal peer.
with respect to this VRF."
::= { fsbgp4MpePeerExtEntry 20 }
fsbgp4mpePeerExtMplsVpnCERouteTargetAdvt OBJECT-TYPE
SYNTAX INTEGER {
send (1),
donotsend (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to inform whether the PE can receive Route
Targets from CE, or PE can send Route Targets(RT) to CE router.
By default sending RT to CE and receiving RT from CE are disabled."
DEFVAL {donotsend}
::= { fsbgp4MpePeerExtEntry 21 }
fsbgp4mpePeerExtMplsVpnCESiteOfOrigin OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Site Of Origin for the site connected CE peer"
::= { fsbgp4MpePeerExtEntry 22 }
-- MIB FOR FSBGP_PEER_EXTENSIONS_TABLE END
--- Multi-Exit Discriminator Table
--- This table specifies the value that has to be assigned to the
--- Multi-Exit Discriminator attribute when an update is sent.
fsbgp4MpeMEDTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeMEDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP4 MED table. This table contains the MED values that are to
be assigned to routes."
::= {fsbgp 22 }
fsbgp4MpeMEDEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeMEDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the MED value."
INDEX { fsbgp4mpeMEDIndex }
::= { fsbgp4MpeMEDTable 1 }
Fsbgp4MpeMEDEntry ::= SEQUENCE {
fsbgp4mpeMEDIndex
Integer32,
fsbgp4mpeMEDAdminStatus
INTEGER,
fsbgp4mpeMEDRemoteAS
Unsigned32,
fsbgp4mpeMEDIPAddrAfi
InetAddressType,
fsbgp4mpeMEDIPAddrSafi
BgpSafi,
fsbgp4mpeMEDIPAddrPrefix
InetAddress,
fsbgp4mpeMEDIPAddrPrefixLen
Integer32,
fsbgp4mpeMEDIntermediateAS
DisplayString,
fsbgp4mpeMEDDirection
INTEGER,
fsbgp4mpeMEDValue
Unsigned32,
fsbgp4mpeMEDPreference
INTEGER,
fsbgp4mpeMEDVrfName
DisplayString
}
fsbgp4mpeMEDIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This is the index to the table. Any entry in the table can be
configured only if fsbgp4LocalAs is set."
::= { fsbgp4MpeMEDEntry 1 }
fsbgp4mpeMEDAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN."
::= {fsbgp4MpeMEDEntry 2 }
fsbgp4mpeMEDRemoteAS OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The remote autonomous system with which this entry is associated.
A value of zero indicates that this entry is not valid and will not
be matched for when the MED value for an update is calculated."
DEFVAL { 0 }
::= { fsbgp4MpeMEDEntry 3 }
fsbgp4mpeMEDIPAddrAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of IP address prefix in the Network Layer Reachability Information
field in updates. This field needs to be set before setting the object
fsbgp4mpeMEDIPAddrPrefix."
::= { fsbgp4MpeMEDEntry 4 }
fsbgp4mpeMEDIPAddrSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of IP address prefix in the Network Layer Reachability Information
field in updates. This field needs to be set before setting the object
fsbgp4mpeMEDIPAddrPrefix."
::= { fsbgp4MpeMEDEntry 5 }
fsbgp4mpeMEDIPAddrPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer Reachability Information
field in updates. A value of zero indicates that the entry is not
valid and will not be matched for when the MED value for an update is
calculated."
DEFVAL { '00000000'H }
::= { fsbgp4MpeMEDEntry 6 }
fsbgp4mpeMEDIPAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length in bits of the IP address prefix in the Network Layer Reachability
Information field. A value of zero indicates that the entry is not
valid and will not be matched for when the MED value for an update is
calculated."
DEFVAL { 0 }
::= { fsbgp4MpeMEDEntry 7 }
fsbgp4mpeMEDIntermediateAS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Comma seperated list of AS numbers that are to
be checked against the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update.Maximum configurable size is 100."
::= { fsbgp4MpeMEDEntry 8 }
fsbgp4mpeMEDDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The direction of the update with which the entry is to be associated."
DEFVAL { in }
::= { fsbgp4MpeMEDEntry 9 }
fsbgp4mpeMEDValue OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 2147483647 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value assigned to the MED Attribute for the route present in NLRI"
DEFVAL { 0 }
::= { fsbgp4MpeMEDEntry 10 }
fsbgp4mpeMEDPreference OBJECT-TYPE
SYNTAX INTEGER {
false(1),
true(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the value present
in this entry takes precedence when the attribute
is already present in the update message that has
been received."
DEFVAL { false }
::= { fsbgp4MpeMEDEntry 11 }
fsbgp4mpeMEDVrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The human-readable name of the VPN."
::= { fsbgp4MpeMEDEntry 12 }
-- Local Preference Table.
-- This table specifies the value that has to assigned to the
-- Local Preference attribute when an update is sent to an
-- internal Peer or received from an external or internal peer.
fsbgp4MpeLocalPrefTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeLocalPrefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP Local Preference table. This table contains,
the value that is to be assigned to the Local
Preference attibute."
::= { fsbgp 23 }
fsbgp4MpeLocalPrefEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeLocalPrefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the connection with a BGP peer."
INDEX { fsbgp4mpeLocalPrefIndex }
::= {fsbgp4MpeLocalPrefTable 1 }
Fsbgp4MpeLocalPrefEntry ::= SEQUENCE {
fsbgp4mpeLocalPrefIndex
Integer32,
fsbgp4mpeLocalPrefAdminStatus
INTEGER,
fsbgp4mpeLocalPrefRemoteAS
Unsigned32,
fsbgp4mpeLocalPrefIPAddrAfi
InetAddressType,
fsbgp4mpeLocalPrefIPAddrSafi
BgpSafi,
fsbgp4mpeLocalPrefIPAddrPrefix
InetAddress,
fsbgp4mpeLocalPrefIPAddrPrefixLen
Integer32,
fsbgp4mpeLocalPrefIntermediateAS
DisplayString,
fsbgp4mpeLocalPrefDirection
INTEGER,
fsbgp4mpeLocalPrefValue
Unsigned32,
fsbgp4mpeLocalPrefPreference
INTEGER,
fsbgp4mpeLocalPrefVrfName
DisplayString
}
fsbgp4mpeLocalPrefIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the index to the table. Any entry in the table can be
configured only if fsbgp4mpeLocalAs is set."
::= { fsbgp4MpeLocalPrefEntry 1 }
fsbgp4mpeLocalPrefAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN."
::= { fsbgp4MpeLocalPrefEntry 2 }
fsbgp4mpeLocalPrefRemoteAS OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote autonomous system with which this entry
is associated. A value of zero indicates that this
entry is not valid and will not be matched for when
the LocalPref value for an update is calculated."
DEFVAL { 0 }
::= { fsbgp4MpeLocalPrefEntry 3 }
fsbgp4mpeLocalPrefIPAddrAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of IP address prefix in the Network Layer Reachability
Information field. This field needs to be set before setting the object
fsbgp4mpeLocalPrefIPAddrPrefix."
::= { fsbgp4MpeLocalPrefEntry 4 }
fsbgp4mpeLocalPrefIPAddrSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sub-sequent address family of IP address prefix in the
Network Layer Reachability Information field.This field needs to be set
before setting the object fsbgp4mpeLocalPrefIPAddrPrefix. "
::= { fsbgp4MpeLocalPrefEntry 5 }
fsbgp4mpeLocalPrefIPAddrPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer Reachability Information field.
A value of zero indicates that the entry is not valid and will not be
matched for when the Local Pref value for an update is calculated."
DEFVAL { '00000000'H }
::= { fsbgp4MpeLocalPrefEntry 6 }
fsbgp4mpeLocalPrefIPAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length in bits of the IP address prefix in the Network Layer Reachability
Information field. A value of zero indicates that the entry is not valid
and will not be matched for when the Local Pref value for an update
is calculated."
DEFVAL { 0 }
::= { fsbgp4MpeLocalPrefEntry 7 }
fsbgp4mpeLocalPrefIntermediateAS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Comma separated list of AS numbers that are to
be present in the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update.Maximum configurable size is 100."
::= { fsbgp4MpeLocalPrefEntry 8 }
fsbgp4mpeLocalPrefDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1), -- incoming updates
out(2) -- outgoing updates
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The direction of the update with which the entry is to be associated."
DEFVAL { in }
::= { fsbgp4MpeLocalPrefEntry 9 }
fsbgp4mpeLocalPrefValue OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 2147483647 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value assigned to the LP Attribute for the route present in NLRI"
DEFVAL { 100 }
::= { fsbgp4MpeLocalPrefEntry 10 }
fsbgp4mpeLocalPrefPreference OBJECT-TYPE
SYNTAX INTEGER {
false(1),
true(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the value present
in this entry takes precedence when the attribute
is already present in the update message that has
been received."
DEFVAL { false }
::= { fsbgp4MpeLocalPrefEntry 11 }
fsbgp4mpeLocalPrefVrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The human-readable name of the VPN."
::= { fsbgp4MpeLocalPrefEntry 12 }
-- Update Filter Table.
-- This table is used to filter out routing updates
fsbgp4MpeUpdateFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeUpdateFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP Update Filter Table. This table contains
Rules to filter out updates based on the AS from
which it is received, NLRI and AS through which it
had passed."
::= { fsbgp 24 }
fsbgp4MpeUpdateFilterEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeUpdateFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the updates
that are to be filtered."
INDEX { fsbgp4mpeUpdateFilterIndex }
::= { fsbgp4MpeUpdateFilterTable 1 }
Fsbgp4MpeUpdateFilterEntry ::= SEQUENCE {
fsbgp4mpeUpdateFilterIndex
Integer32,
fsbgp4mpeUpdateFilterAdminStatus
INTEGER,
fsbgp4mpeUpdateFilterRemoteAS
Unsigned32,
fsbgp4mpeUpdateFilterIPAddrAfi
InetAddressType,
fsbgp4mpeUpdateFilterIPAddrSafi
BgpSafi,
fsbgp4mpeUpdateFilterIPAddrPrefix
InetAddress,
fsbgp4mpeUpdateFilterIPAddrPrefixLen
Integer32,
fsbgp4mpeUpdateFilterIntermediateAS
DisplayString,
fsbgp4mpeUpdateFilterDirection
INTEGER,
fsbgp4mpeUpdateFilterAction
INTEGER,
fsbgp4mpeUpdateFilterVrfName
DisplayString
}
fsbgp4mpeUpdateFilterIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the index to the table. Any entry in the table can be configured
only if fsbgp4LocalAs is set."
::= { fsbgp4MpeUpdateFilterEntry 1 }
fsbgp4mpeUpdateFilterAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of this entry. The entries in a row are
configurable only if the admin status is DOWN."
::= { fsbgp4MpeUpdateFilterEntry 2 }
fsbgp4mpeUpdateFilterRemoteAS OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote autonomous system with which this entry
is associated. A value of zero indicates that this
entry is not valid and will not be matched for when
the update is checked."
DEFVAL { 0 }
::= { fsbgp4MpeUpdateFilterEntry 3 }
fsbgp4mpeUpdateFilterIPAddrAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of IP address prefix in the Network Layer Reachability
Information field. This field needs to be set, before setting the object
fsbgp4mpeUpdateFilterIPAddrPrefix."
::= { fsbgp4MpeUpdateFilterEntry 4 }
fsbgp4mpeUpdateFilterIPAddrSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SAFI of IP address prefix in the Network Layer Reachability
Information field. This field needs to be set, before setting the object
fsbgp4mpeUpdateFilterIPAddrPrefix."
::= { fsbgp4MpeUpdateFilterEntry 5 }
fsbgp4mpeUpdateFilterIPAddrPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer Reachability Information field.
A value of zero in this field indicates that the NLRI field may not be
matched."
DEFVAL { '00000000'H }
::= { fsbgp4MpeUpdateFilterEntry 6 }
fsbgp4mpeUpdateFilterIPAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length in bits of the IP address prefix
in the Network Layer Reachability
Information field. A value of zero in this field
indicates that the NLRI field may not be matched."
DEFVAL { 0 }
::= { fsbgp4MpeUpdateFilterEntry 7 }
fsbgp4mpeUpdateFilterIntermediateAS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Comma separated list of AS numbers that are to
be present in the AS_PATH attribute of the Update.
An empty field indicates that the same need not be
checked for in the update."
::= { fsbgp4MpeUpdateFilterEntry 8 }
fsbgp4mpeUpdateFilterDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1), -- incoming updates
out(2) -- outgoing updates
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The direction of the update with which the entry is to be associated."
DEFVAL { in }
::= { fsbgp4MpeUpdateFilterEntry 9 }
fsbgp4mpeUpdateFilterAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1), -- do not filter
filter (2) -- filter
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be taken when the characteristics
that are specified in the entry is matched."
DEFVAL { filter }
::= { fsbgp4MpeUpdateFilterEntry 10 }
fsbgp4mpeUpdateFilterVrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The human-readable name of the VPN."
::= { fsbgp4MpeUpdateFilterEntry 11 }
-- Aggregation Table.
-- This table is used to aggregate the routing information
-- before the same are advertised to peers.
fsbgp4MpeAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP Aggregate Table. The entries in the table
specifies the IP address based on which the routing
information has to be aggregated."
::= { fsbgp 25 }
fsbgp4MpeAggregateEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the IP address
on which the aggregation has to be done."
INDEX { fsbgp4mpeAggregateIndex }
::= { fsbgp4MpeAggregateTable 1 }
Fsbgp4MpeAggregateEntry ::= SEQUENCE {
fsbgp4mpeAggregateIndex
Integer32,
fsbgp4mpeAggregateAdminStatus
INTEGER,
fsbgp4mpeAggregateIPAddrAfi
InetAddressType,
fsbgp4mpeAggregateIPAddrSafi
BgpSafi,
fsbgp4mpeAggregateIPAddrPrefix
InetAddress,
fsbgp4mpeAggregateIPAddrPrefixLen
Integer32,
fsbgp4mpeAggregateAdvertise
INTEGER,
fsbgp4mpeAggregateVrfName
DisplayString,
fsbgp4mpeAggregateAsSet
INTEGER,
fsbgp4mpeAggregateAdvertiseRouteMapName
DisplayString,
fsbgp4mpeAggregateSuppressRouteMapName
DisplayString,
fsbgp4mpeAggregateAttributeRouteMapName
DisplayString
}
fsbgp4mpeAggregateIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the index to the table.Any entry in the table can be
configured only if fsbgp4LocalAs is set."
::= { fsbgp4MpeAggregateEntry 1 }
fsbgp4mpeAggregateAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
invalid(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of this entry. When the adminstatus is set to up,
the aggregate entry will be made active and the aggregate route
will be formed for this entry. When the adminstatus is set to down,
the aggregate route, if advertised will be withdrawn and the
more-specific routes will be advertised. When the adminstatus is
set to invalid, the aggregate entry will be deleted."
::= { fsbgp4MpeAggregateEntry 2 }
fsbgp4mpeAggregateIPAddrAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of IP address prefix in the Network Layer Reachability
Information field. This field needs to be set before setting the object
fsbgp4mpeAggregateIPAddrPrefix. "
::= { fsbgp4MpeAggregateEntry 3 }
fsbgp4mpeAggregateIPAddrSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SAFI of IP address prefix in the Network Layer Reachability
Information field. This field needs to be set before setting the object
fsbgp4mpeAggregateIPAddrPrefix..
[Note] SAFI for Carrying Label (4) can't be set. The configuration with
SAFI unicast(1) holds good for both labelled and unlabelled prefixes."
::= { fsbgp4MpeAggregateEntry 4 }
fsbgp4mpeAggregateIPAddrPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer Reachability Information field.
This field is configurable only if the admin status is DOWN"
::= { fsbgp4MpeAggregateEntry 5 }
fsbgp4mpeAggregateIPAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length in bits of the IP address prefix in the Network Layer Reachability
Information field. This field is configurable only if the admin status
is DOWN."
::= { fsbgp4MpeAggregateEntry 6 }
fsbgp4mpeAggregateAdvertise OBJECT-TYPE
SYNTAX INTEGER {
summaryOnly (1),
all (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the route update that should be sent
to the peers -
summary-only - specifies that only the summarized route
has to be advertised to peers.
All - specifies that both the summary and the
more-specific routes based on which the summary entry
was generated has to be advertised to the peers."
::= { fsbgp4MpeAggregateEntry 7 }
fsbgp4mpeAggregateVrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The human-readable name of the VPN."
::= { fsbgp4MpeAggregateEntry 8 }
fsbgp4mpeAggregateAsSet OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Disables the autonomous system set path information.
It is an optional parameter "
::= { fsbgp4MpeAggregateEntry 9 }
fsbgp4mpeAggregateAdvertiseRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The human-readable name for adverise route-map. The route map contains
the rules for advertising the routes while aggregation. When we use
advertise-map, only advertise-map influences the creation of aggregate
entry. In absence of advertise-map, the aggregate route inherits the
attributes of the more specific routes, both suppressed and unsuppressed.
When advertise-map is used with fsbgp4mpeAggregateAsSet (as enable) and
suppress map, the aggregate inherits the attributes of only the routes
that are selected in the advertise-map, irrespective of whether
suppress-map suppresses the routes."
::= { fsbgp4MpeAggregateEntry 10 }
fsbgp4mpeAggregateSuppressRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The human-readable name for suppress route-map. The route map contains
the rules for suppressing the routes while aggregation. when we use
suppress-map configuration along with (summaryonly option set for)
fsbgp4mpeAggregateAdvertise, it does'nt have any effect. And the
more-specific routes that the suppress-map suppresses are not
advertised. Other routes are advertised. When we use
fsbgp4mpeAggregateAsSet (with enabled option) with suppress-map although
suppress routes are not advertised, the aggregated routes inherits the
attributes of all the suppressesed rotues. But it can be overwritten by
attribute-map."
::= { fsbgp4MpeAggregateEntry 11 }
fsbgp4mpeAggregateAttributeRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The human-readable name for attribute route-map. The route map contains
the rules for setting the attributes the aggregated route. When
attribute-map and advertise-map along with fsbgp4mpeAggregateAsSet (enable)
and other configurations, the attribute-map overrides the attribute that
are configured in the attribute-map."
::= { fsbgp4MpeAggregateEntry 12 }
-- SCALAR_TABLE_END fsbgp4RRDGroup
-- RRD OBJECT DEFINITION END
-- MIB for Importing STATIC routes to BGP and Viewing non-BGP routes.
fsbgp4MpeImportRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeImportRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Non-BGP routes imported into the BGP RIB can be viewed through this table.
Also allows importing a static route into BGP.After updating the RIB tree,
if there is any change in the best route selected, then the route is
updated to the Common Forwarding table."
::= { fsbgp 26 }
fsbgp4MpeImportRouteEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeImportRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Import Route entry."
INDEX {
fsbgp4mpeImportRoutePrefixAfi,
fsbgp4mpeImportRoutePrefixSafi,
fsbgp4mpeImportRoutePrefix,
fsbgp4mpeImportRoutePrefixLen,
fsbgp4mpeImportRouteProtocol,
fsbgp4mpeImportRouteNextHop,
fsbgp4mpeImportRouteIfIndex,
fsbgp4mpeImportRouteMetric,
fsbgp4mpeImportRouteVrf
}
::= { fsbgp4MpeImportRouteTable 1 }
Fsbgp4MpeImportRouteEntry ::= SEQUENCE {
fsbgp4mpeImportRoutePrefixAfi InetAddressType,
fsbgp4mpeImportRoutePrefixSafi BgpSafi,
fsbgp4mpeImportRoutePrefix InetAddress,
fsbgp4mpeImportRoutePrefixLen Integer32,
fsbgp4mpeImportRouteProtocol Integer32,
fsbgp4mpeImportRouteNextHop InetAddress,
fsbgp4mpeImportRouteIfIndex Integer32,
fsbgp4mpeImportRouteMetric Integer32,
fsbgp4mpeImportRouteVrf DisplayString,
fsbgp4mpeImportRouteAction INTEGER
}
fsbgp4mpeImportRoutePrefixAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of Prefix of the route to be imported."
::= { fsbgp4MpeImportRouteEntry 1 }
fsbgp4mpeImportRoutePrefixSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SAFI of Prefix of the route to be imported. Only UNICAST (1) is allowed
right now. Route can be imported into VRF by providing SAFI (1) and
VRF name."
::= { fsbgp4MpeImportRouteEntry 2 }
fsbgp4mpeImportRoutePrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Prefix of the route to be imported."
::= { fsbgp4MpeImportRouteEntry 3 }
fsbgp4mpeImportRoutePrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Prefix length of the route."
::= { fsbgp4MpeImportRouteEntry 4 }
fsbgp4mpeImportRouteProtocol OBJECT-TYPE
SYNTAX Integer32 (2|3|8|13)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Protocol value for Non-BGP routes.
2- LOCAL,
3 - STATIC,
8 - RIP,
13 - OSPF.
Only STATIC routes (protocol 3) can be added through this table.
However all non-BGP protocol (Local, Static, RIP, OSPF) routes can
be viewed."
::= { fsbgp4MpeImportRouteEntry 5 }
fsbgp4mpeImportRouteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NextHop Ipaddress for the route."
::= { fsbgp4MpeImportRouteEntry 6 }
fsbgp4mpeImportRouteIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Index of the Route"
::= { fsbgp4MpeImportRouteEntry 7 }
fsbgp4mpeImportRouteMetric OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Metric for the route being imported."
::= { fsbgp4MpeImportRouteEntry 8 }
fsbgp4mpeImportRouteVrf OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vrf in which the route should be imported. If the rotueis to be installed
in default VRF, the value should be NULL string"
::= { fsbgp4MpeImportRouteEntry 9 }
fsbgp4mpeImportRouteAction OBJECT-TYPE
SYNTAX INTEGER {
add (1), -- route addition
delete (2) -- route deletion
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls addition or deletion of route."
::= { fsbgp4MpeImportRouteEntry 10 }
-- MIB for Importing DIRECT/STATIC routes to BGP end
-- MIB for getting FSM transition history
fsbgp4MpeFsmTransitionHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeFsmTransitionHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Gets FSM transitions history per peer "
::= { fsbgp 27 }
fsbgp4MpeFsmTransitionHistEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeFsmTransitionHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fsm Hist entry."
INDEX {
fsbgp4mpePeerType,
fsbgp4mpePeer
}
::= { fsbgp4MpeFsmTransitionHistTable 1 }
Fsbgp4MpeFsmTransitionHistEntry ::= SEQUENCE {
fsbgp4mpePeerType InetAddressType,
fsbgp4mpePeer InetAddress,
fsbgp4mpeFsmTransitionHist DisplayString
}
fsbgp4mpePeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of Peer from which FSM transition history would be read."
::= { fsbgp4MpeFsmTransitionHistEntry 1 }
fsbgp4mpePeer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Peer from which FSM transition history would be read."
::= { fsbgp4MpeFsmTransitionHistEntry 2 }
fsbgp4mpeFsmTransitionHist OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" sequence of FSM states separated by space"
::= { fsbgp4MpeFsmTransitionHistEntry 3 }
--- Routes Damping History Table
fsbgp4MpeRfd OBJECT IDENTIFIER ::= { fsbgp 28}
fsbgp4MpeRfdRtDampHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeRfdRtDampHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route damping history table.This table contains the figure-of-merit and
the route status"
::= { fsbgp4MpeRfd 1 }
fsbgp4MpeRfdRtDampHistEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeRfdRtDampHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains route damping history"
INDEX { fsbgp4mpePathAttrAddrPrefixAfi,
fsbgp4mpePathAttrAddrPrefixSafi,
fsbgp4mpePathAttrAddrPrefix,
fsbgp4mpePathAttrAddrPrefixLen,
fsbgp4mpePathAttrPeerType,
fsbgp4mpePathAttrPeer
}
::= { fsbgp4MpeRfdRtDampHistTable 1 }
Fsbgp4MpeRfdRtDampHistEntry ::= SEQUENCE {
fsbgp4mpePathAttrAddrPrefixAfi
InetAddressType,
fsbgp4mpePathAttrAddrPrefixSafi
BgpSafi,
fsbgp4mpePathAttrAddrPrefix
InetAddress,
fsbgp4mpePathAttrAddrPrefixLen
Integer32,
fsbgp4mpePathAttrPeerType
InetAddressType,
fsbgp4mpePathAttrPeer
InetAddress,
fsbgp4mpeRfdRtFom
Integer32,
fsbgp4mpeRfdRtLastUpdtTime
Integer32,
fsbgp4mpeRfdRtState
INTEGER,
fsbgp4mpeRfdRtStatus
INTEGER,
fsbgp4mpeRfdRtFlapCount
Integer32,
fsbgp4mpeRfdRtFlapTime
Integer32,
fsbgp4mpeRfdRtReuseTime
Integer32
}
fsbgp4mpePathAttrAddrPrefixAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of the route "
::= { fsbgp4MpeRfdRtDampHistEntry 1 }
fsbgp4mpePathAttrAddrPrefixSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SAFI of the route "
::= { fsbgp4MpeRfdRtDampHistEntry 2 }
fsbgp4mpePathAttrAddrPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address prefix in the NLRI field. This object is an IP address
containing the prefix with the length specified by
fsbgp4mpePathAttrAddrPrefixLen. Any bits beyond the length specified by
bgp4PathAttrAddrPrefixLen are
zeroed."
::= { fsbgp4MpeRfdRtDampHistEntry 3 }
fsbgp4mpePathAttrAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Length in bits of the IP address prefix in NLRI field."
::= { fsbgp4MpeRfdRtDampHistEntry 4 }
fsbgp4mpePathAttrPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of the peer "
::= { fsbgp4MpeRfdRtDampHistEntry 5 }
fsbgp4mpePathAttrPeer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Peer remote address of the peer where the path information was
learned."
::= { fsbgp4MpeRfdRtDampHistEntry 6 }
fsbgp4mpeRfdRtFom OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The figure-of-merit of the route"
::= { fsbgp4MpeRfdRtDampHistEntry 7 }
fsbgp4mpeRfdRtLastUpdtTime OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the route figure-of-merit was updated."
::= {fsbgp4MpeRfdRtDampHistEntry 8 }
fsbgp4mpeRfdRtState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
suppressed (2),
unsuppressed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value gives the status whether the route is suppressed or not "
::= { fsbgp4MpeRfdRtDampHistEntry 9 }
fsbgp4mpeRfdRtStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
feasibleroute (2),
unfeasibleroute (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value gives the status whether the route is feasible or unfeasible
route"
::= { fsbgp4MpeRfdRtDampHistEntry 10 }
fsbgp4mpeRfdRtFlapCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value gives the number of times the route being flapped"
::= { fsbgp4MpeRfdRtDampHistEntry 11 }
fsbgp4mpeRfdRtFlapTime OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time calculated for a route, from when a route is being flapped for
first time, time in seconds"
::= { fsbgp4MpeRfdRtDampHistEntry 12 }
fsbgp4mpeRfdRtReuseTime OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time after which a route can be reused again after it moves to
suppressed state from unsuppressed state, time in seconds"
::= { fsbgp4MpeRfdRtDampHistEntry 13 }
--- Peers Damping History Table
fsbgp4MpeRfdPeerDampHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeRfdPeerDampHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Peer Damping history table. It contains the peer figure-of-merit and
peer status."
::= { fsbgp4MpeRfd 2 }
fsbgp4MpeRfdPeerDampHistEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeRfdPeerDampHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains peer damping history"
INDEX { fsbgp4mpePeerRemoteIpAddrType,
fsbgp4mpePeerRemoteIpAddr
}
::= { fsbgp4MpeRfdPeerDampHistTable 1 }
Fsbgp4MpeRfdPeerDampHistEntry ::= SEQUENCE {
fsbgp4mpePeerRemoteIpAddrType
InetAddressType,
fsbgp4mpePeerRemoteIpAddr
InetAddress,
fsbgp4mpeRfdPeerFom
Integer32,
fsbgp4mpeRfdPeerLastUpdtTime
Integer32,
fsbgp4mpeRfdPeerState
INTEGER,
fsbgp4mpeRfdPeerStatus
INTEGER
}
fsbgp4mpePeerRemoteIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of the remote peer "
::= { fsbgp4MpeRfdPeerDampHistEntry 1 }
fsbgp4mpePeerRemoteIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The peer remote address of the peer."
::= { fsbgp4MpeRfdPeerDampHistEntry 2 }
fsbgp4mpeRfdPeerFom OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current figure-of-merit of peer"
::= {fsbgp4MpeRfdPeerDampHistEntry 3 }
fsbgp4mpeRfdPeerLastUpdtTime OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the figure-of-merit was updated."
::= {fsbgp4MpeRfdPeerDampHistEntry 4 }
fsbgp4mpeRfdPeerState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
suppressed (2),
unsuppressed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value gives the status whether peer is suppressed or not"
::= {fsbgp4MpeRfdPeerDampHistEntry 5 }
fsbgp4mpeRfdPeerStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
peerup (2),
peerdown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value gives the status whether peer is up or down"
::= {fsbgp4MpeRfdPeerDampHistEntry 6 }
---Routes Reuse List Table
fsbgp4MpeRfdRtsReuseListTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeRfdRtsReuseListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Routes Reuse List Table. It contains the IP prefix and prefix length."
::= { fsbgp4MpeRfd 3 }
fsbgp4MpeRfdRtsReuseListEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeRfdRtsReuseListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains routes reuse list"
INDEX { fsbgp4mpeRtAfi,
fsbgp4mpeRtSafi,
fsbgp4mpeRtIPPrefix,
fsbgp4mpeRtIPPrefixLen,
fsbgp4mpeRfdRtsReusePeerType,
fsbgp4mpePeerRemAddress
}
::= { fsbgp4MpeRfdRtsReuseListTable 1 }
Fsbgp4MpeRfdRtsReuseListEntry ::= SEQUENCE {
fsbgp4mpeRtAfi
InetAddressType,
fsbgp4mpeRtSafi
BgpSafi,
fsbgp4mpeRtIPPrefix
InetAddress,
fsbgp4mpeRtIPPrefixLen
Integer32,
fsbgp4mpeRfdRtsReusePeerType
InetAddressType,
fsbgp4mpePeerRemAddress
InetAddress,
fsbgp4mpeRfdRtReuseListRtFom
Integer32,
fsbgp4mpeRfdRtReuseListRtLastUpdtTime
Integer32,
fsbgp4mpeRfdRtReuseListRtState
INTEGER,
fsbgp4mpeRfdRtReuseListRtStatus
INTEGER
}
fsbgp4mpeRtAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of the route"
::= { fsbgp4MpeRfdRtsReuseListEntry 1 }
fsbgp4mpeRtSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of the route"
::= { fsbgp4MpeRfdRtsReuseListEntry 2 }
fsbgp4mpeRtIPPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address prefix in the NLRI field. This object is an IP address
containing the prefix with the length specified by fsbgp4RtIPPrefixLen.
Any bits beyond the length specified by fsbgp4IPPrefixLen are
zeroed."
::= { fsbgp4MpeRfdRtsReuseListEntry 3 }
fsbgp4mpeRtIPPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Length in bits of the IP address prefix in NLRI field."
::= { fsbgp4MpeRfdRtsReuseListEntry 4 }
fsbgp4mpeRfdRtsReusePeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of the remote peer"
::= { fsbgp4MpeRfdRtsReuseListEntry 5 }
fsbgp4mpePeerRemAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Peer remote address of the peer where the path information was
learned."
::= { fsbgp4MpeRfdRtsReuseListEntry 6 }
fsbgp4mpeRfdRtReuseListRtFom OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The figure-of-merit of the route which is in the routes reuse list"
::= {fsbgp4MpeRfdRtsReuseListEntry 7 }
fsbgp4mpeRfdRtReuseListRtLastUpdtTime OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the route figure-of-merit was updated."
::= {fsbgp4MpeRfdRtsReuseListEntry 8 }
fsbgp4mpeRfdRtReuseListRtState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
suppressed (2),
unsuppressed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value gives the status whether the route is suppressed or not "
::= { fsbgp4MpeRfdRtsReuseListEntry 9 }
fsbgp4mpeRfdRtReuseListRtStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
feasibleroute (2),
unfeasibleroute (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value gives the status whether the route is feasible or unfeasible
route"
::= { fsbgp4MpeRfdRtsReuseListEntry 10 }
--- Peer's Reuse List Table
fsbgp4MpeRfdPeerReuseListTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeRfdPeerReuseListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Peer's Reuse List Table. It contains the Peer Remote Address."
::= { fsbgp4MpeRfd 4 }
fsbgp4MpeRfdPeerReuseListEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeRfdPeerReuseListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains routes reuse list"
INDEX { fsbgp4mpeRfdPeerRemIpAddrType,
fsbgp4mpeRfdPeerRemIpAddr
}
::= {fsbgp4MpeRfdPeerReuseListTable 1 }
Fsbgp4MpeRfdPeerReuseListEntry ::= SEQUENCE {
fsbgp4mpeRfdPeerRemIpAddrType
InetAddressType,
fsbgp4mpeRfdPeerRemIpAddr
InetAddress,
fsbgp4mpeRfdPeerReuseListPeerFom
Integer32,
fsbgp4mpeRfdPeerReuseListLastUpdtTime
Integer32,
fsbgp4mpeRfdPeerReuseListPeerState
INTEGER,
fsbgp4mpeRfdPeerReuseListPeerStatus
INTEGER
}
fsbgp4mpeRfdPeerRemIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of the peer"
::= { fsbgp4MpeRfdPeerReuseListEntry 1 }
fsbgp4mpeRfdPeerRemIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The peer remote address of the peer which is in the peer's reuse list."
::= { fsbgp4MpeRfdPeerReuseListEntry 2 }
fsbgp4mpeRfdPeerReuseListPeerFom OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current figure-of-merit of peer"
::= {fsbgp4MpeRfdPeerReuseListEntry 3 }
fsbgp4mpeRfdPeerReuseListLastUpdtTime OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the figure-of-merit was updated."
::= {fsbgp4MpeRfdPeerReuseListEntry 4 }
fsbgp4mpeRfdPeerReuseListPeerState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
suppressed (2),
unsuppressed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value gives the status whether peer is suppressed or not"
::= {fsbgp4MpeRfdPeerReuseListEntry 5 }
fsbgp4mpeRfdPeerReuseListPeerStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
peerup (2),
peerdown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value gives the status whether peer is up or down"
::= {fsbgp4MpeRfdPeerReuseListEntry 6 }
-- MIB FOR FSBGP_ROUTEFLAPDAMPING end
-- MIB FOR FSBGP_COMMUNITY
--- Routes Additive Community Table
--- Represents the additive communities configured for
--- destinations.
fsbgpMpeComm OBJECT IDENTIFIER ::= { fsbgp 29}
fsbgp4MpeCommRouteAddCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeCommRouteAddCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure additive communities
for a given destination."
::= {fsbgpMpeComm 1 }
fsbgp4MpeCommRouteAddCommEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeCommRouteAddCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Routes configured additive communities Table Entry"
INDEX {fsbgp4mpeAddCommRtAfi,
fsbgp4mpeAddCommRtSafi,
fsbgp4mpeAddCommIpNetwork,
fsbgp4mpeAddCommIpPrefixLen,
fsbgp4mpeAddCommVal
}
::= { fsbgp4MpeCommRouteAddCommTable 1 }
Fsbgp4MpeCommRouteAddCommEntry ::= SEQUENCE {
fsbgp4mpeAddCommRtAfi
InetAddressType,
fsbgp4mpeAddCommRtSafi
BgpSafi,
fsbgp4mpeAddCommIpNetwork
InetAddress,
fsbgp4mpeAddCommIpPrefixLen
Integer32,
fsbgp4mpeAddCommVal
Unsigned32,
fsbgp4mpeAddCommRowStatus
RowStatus
}
fsbgp4mpeAddCommRtAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of IP address of the destination"
::= { fsbgp4MpeCommRouteAddCommEntry 1 }
fsbgp4mpeAddCommRtSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SAFI of IP address of the destination"
::= { fsbgp4MpeCommRouteAddCommEntry 2 }
fsbgp4mpeAddCommIpNetwork OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of the destination"
::= { fsbgp4MpeCommRouteAddCommEntry 3 }
fsbgp4mpeAddCommIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4MpeCommRouteAddCommEntry 4 }
fsbgp4mpeAddCommVal OBJECT-TYPE
SYNTAX Unsigned32 (65536..4294901759|4294967041..4294967043)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additive Community configured for the Route"
::= { fsbgp4MpeCommRouteAddCommEntry 5 }
fsbgp4mpeAddCommRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAS is configured."
::= { fsbgp4MpeCommRouteAddCommEntry 6 }
--- Routes Delete Community Table
--- Represents the communities to be deleted for the
--- destinations.
fsbgp4MpeCommRouteDeleteCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeCommRouteDeleteCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure delete communities
for a given destination."
::= {fsbgpMpeComm 2}
fsbgp4MpeCommRouteDeleteCommEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeCommRouteDeleteCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Routes configured delete communities Table Entry"
INDEX {fsbgp4mpeDeleteCommRtAfi,
fsbgp4mpeDeleteCommRtSafi,
fsbgp4mpeDeleteCommIpNetwork,
fsbgp4mpeDeleteCommIpPrefixLen,
fsbgp4mpeDeleteCommVal
}
::= { fsbgp4MpeCommRouteDeleteCommTable 1 }
Fsbgp4MpeCommRouteDeleteCommEntry ::= SEQUENCE {
fsbgp4mpeDeleteCommRtAfi
InetAddressType,
fsbgp4mpeDeleteCommRtSafi
BgpSafi,
fsbgp4mpeDeleteCommIpNetwork
InetAddress,
fsbgp4mpeDeleteCommIpPrefixLen
Integer32,
fsbgp4mpeDeleteCommVal
Unsigned32,
fsbgp4mpeDeleteCommRowStatus
RowStatus
}
fsbgp4mpeDeleteCommRtAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of IP address of the destination"
::= { fsbgp4MpeCommRouteDeleteCommEntry 1 }
fsbgp4mpeDeleteCommRtSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SAFI of IP address of the destination"
::= { fsbgp4MpeCommRouteDeleteCommEntry 2 }
fsbgp4mpeDeleteCommIpNetwork OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of the destination"
::= { fsbgp4MpeCommRouteDeleteCommEntry 3 }
fsbgp4mpeDeleteCommIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4MpeCommRouteDeleteCommEntry 4 }
fsbgp4mpeDeleteCommVal OBJECT-TYPE
SYNTAX Unsigned32 (65536..4294901759|4294967041..4294967043)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Delete Community configured for the Route"
::= { fsbgp4MpeCommRouteDeleteCommEntry 5 }
fsbgp4mpeDeleteCommRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAS is configured."
::= { fsbgp4MpeCommRouteDeleteCommEntry 6 }
--- Routes Community Set Status Table
--- Represents the status or local policy (can be either, addition of
--- communities, deletion of communities or both or complete
--- ommission of communities) for destinations.
fsbgp4MpeCommRouteCommSetStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeCommRouteCommSetStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the local policy of communities
for a given destination."
::= {fsbgpMpeComm 3 }
fsbgp4MpeCommRouteCommSetStatusEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeCommRouteCommSetStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Routes configured delete communities Table Entry"
INDEX {fsbgp4mpeCommSetStatusAfi,
fsbgp4mpeCommSetStatusSafi,
fsbgp4mpeCommSetStatusIpNetwork,
fsbgp4mpeCommSetStatusIpPrefixLen
}
::= { fsbgp4MpeCommRouteCommSetStatusTable 1 }
Fsbgp4MpeCommRouteCommSetStatusEntry ::= SEQUENCE {
fsbgp4mpeCommSetStatusAfi
InetAddressType,
fsbgp4mpeCommSetStatusSafi
BgpSafi,
fsbgp4mpeCommSetStatusIpNetwork
InetAddress,
fsbgp4mpeCommSetStatusIpPrefixLen
Integer32,
fsbgp4mpeCommSetStatus
INTEGER,
fsbgp4mpeCommSetStatusRowStatus
RowStatus
}
fsbgp4mpeCommSetStatusAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of IP address of the destination"
::= { fsbgp4MpeCommRouteCommSetStatusEntry 1 }
fsbgp4mpeCommSetStatusSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SAFI of IP address of the destination"
::= { fsbgp4MpeCommRouteCommSetStatusEntry 2 }
fsbgp4mpeCommSetStatusIpNetwork OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of the destination"
::= { fsbgp4MpeCommRouteCommSetStatusEntry 3 }
fsbgp4mpeCommSetStatusIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4MpeCommRouteCommSetStatusEntry 4 }
fsbgp4mpeCommSetStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
set (2),
setnone (3),
modify (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Community Set status for the Route.
o none - is for read-only
o set - to send only with configured additive communities
o setnone - to send without communities,
o modify - to strip delete communities in received
communities and add additive communities
This object can be set only if fsbgp4LocalAs is configured."
DEFVAL { 4 }
::= { fsbgp4MpeCommRouteCommSetStatusEntry 5 }
fsbgp4mpeCommSetStatusRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for creating entries into this table.
This object can be set only if fsbgp4LocalAs is configured."
::= { fsbgp4MpeCommRouteCommSetStatusEntry 6 }
-- MIB FOR FSBGP_COMMUNITY end
-- MIB FOR FSBGP_EXTCOMM
--- Routes Additive Ext-Community Table
--- Represents the additive extended communities configured for
--- destinations.
fsbgpMpeExtComm OBJECT IDENTIFIER ::= {fsbgp 30}
fsbgp4MpeExtCommRouteAddExtCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeExtCommRouteAddExtCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure additive extended communities
for a given destination."
::= {fsbgpMpeExtComm 1 }
fsbgp4MpeExtCommRouteAddExtCommEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeExtCommRouteAddExtCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Routes configured additive ext-communities Table Entry"
INDEX {fsbgp4mpeAddExtCommRtAfi,
fsbgp4mpeAddExtCommRtSafi,
fsbgp4mpeAddExtCommIpNetwork,
fsbgp4mpeAddExtCommIpPrefixLen,
fsbgp4mpeAddExtCommVal
}
::= { fsbgp4MpeExtCommRouteAddExtCommTable 1 }
Fsbgp4MpeExtCommRouteAddExtCommEntry ::= SEQUENCE {
fsbgp4mpeAddExtCommRtAfi
InetAddressType,
fsbgp4mpeAddExtCommRtSafi
BgpSafi,
fsbgp4mpeAddExtCommIpNetwork
InetAddress,
fsbgp4mpeAddExtCommIpPrefixLen
Integer32,
fsbgp4mpeAddExtCommVal
OCTET STRING,
fsbgp4mpeAddExtCommRowStatus
RowStatus
}
fsbgp4mpeAddExtCommRtAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of IP address of the destination"
::= { fsbgp4MpeExtCommRouteAddExtCommEntry 1 }
fsbgp4mpeAddExtCommRtSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of IP address of the destination"
::= { fsbgp4MpeExtCommRouteAddExtCommEntry 2 }
fsbgp4mpeAddExtCommIpNetwork OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of the destination"
::= { fsbgp4MpeExtCommRouteAddExtCommEntry 3 }
fsbgp4mpeAddExtCommIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4MpeExtCommRouteAddExtCommEntry 4 }
fsbgp4mpeAddExtCommVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additive Ext-Community for the destination"
::= { fsbgp4MpeExtCommRouteAddExtCommEntry 5 }
fsbgp4mpeAddExtCommRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for creating entries into this table.This object can be set
only if fsbgp4LocalAs is configured."
::= { fsbgp4MpeExtCommRouteAddExtCommEntry 6 }
--- Routes Delete Ext-Community Table
--- Represents the extended communities to be deleted for the
--- destinations.
fsbgp4MpeExtCommRouteDeleteExtCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeExtCommRouteDeleteExtCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure delete extended communities
for a given destination."
::= {fsbgpMpeExtComm 2 }
fsbgp4MpeExtCommRouteDeleteExtCommEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeExtCommRouteDeleteExtCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Routes configured delete ext-communities Table Entry"
INDEX {fsbgp4mpeDeleteExtCommRtAfi,
fsbgp4mpeDeleteExtCommRtSafi,
fsbgp4mpeDeleteExtCommIpNetwork,
fsbgp4mpeDeleteExtCommIpPrefixLen,
fsbgp4mpeDeleteExtCommVal
}
::= { fsbgp4MpeExtCommRouteDeleteExtCommTable 1 }
Fsbgp4MpeExtCommRouteDeleteExtCommEntry ::= SEQUENCE {
fsbgp4mpeDeleteExtCommRtAfi
InetAddressType,
fsbgp4mpeDeleteExtCommRtSafi
BgpSafi,
fsbgp4mpeDeleteExtCommIpNetwork
InetAddress,
fsbgp4mpeDeleteExtCommIpPrefixLen
Integer32,
fsbgp4mpeDeleteExtCommVal
OCTET STRING,
fsbgp4mpeDeleteExtCommRowStatus
RowStatus
}
fsbgp4mpeDeleteExtCommRtAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of IP address of the destination"
::= { fsbgp4MpeExtCommRouteDeleteExtCommEntry 1 }
fsbgp4mpeDeleteExtCommRtSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SAFI of IP address of the destination"
::= { fsbgp4MpeExtCommRouteDeleteExtCommEntry 2 }
fsbgp4mpeDeleteExtCommIpNetwork OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of the destination"
::= { fsbgp4MpeExtCommRouteDeleteExtCommEntry 3 }
fsbgp4mpeDeleteExtCommIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP prefix length for the destination"
::= { fsbgp4MpeExtCommRouteDeleteExtCommEntry 4 }
fsbgp4mpeDeleteExtCommVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Delete Ext-Community for the destination"
::= { fsbgp4MpeExtCommRouteDeleteExtCommEntry 5 }
fsbgp4mpeDeleteExtCommRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status to create entries into this table. This object can be set only
if fsbgp4LocalAs is configured."
::= { fsbgp4MpeExtCommRouteDeleteExtCommEntry 6 }
--- Routes Ext-Community Set Status Table
--- Represents the status or local policy (can be either, addition of extended
--- communities, deletion of extended communities or both or complete
--- ommission of extended communities) for destinations.
fsbgp4MpeExtCommRouteExtCommSetStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeExtCommRouteExtCommSetStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the local policy of extended communities
for a given destination."
::= {fsbgpMpeExtComm 3 }
fsbgp4MpeExtCommRouteExtCommSetStatusEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeExtCommRouteExtCommSetStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Routes configured delete ext-communities Table Entry"
INDEX { fsbgp4mpeExtCommSetStatusRtAfi,
fsbgp4mpeExtCommSetStatusRtSafi,
fsbgp4mpeExtCommSetStatusIpNetwork,
fsbgp4mpeExtCommSetStatusIpPrefixLen
}
::= { fsbgp4MpeExtCommRouteExtCommSetStatusTable 1 }
Fsbgp4MpeExtCommRouteExtCommSetStatusEntry ::= SEQUENCE {
fsbgp4mpeExtCommSetStatusRtAfi
InetAddressType,
fsbgp4mpeExtCommSetStatusRtSafi
BgpSafi,
fsbgp4mpeExtCommSetStatusIpNetwork
InetAddress,
fsbgp4mpeExtCommSetStatusIpPrefixLen
Integer32,
fsbgp4mpeExtCommSetStatus
INTEGER,
fsbgp4mpeExtCommSetStatusRowStatus
RowStatus
}
fsbgp4mpeExtCommSetStatusRtAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of IP address of the destination"
::= { fsbgp4MpeExtCommRouteExtCommSetStatusEntry 1 }
fsbgp4mpeExtCommSetStatusRtSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SAFI of IP address of the destination"
::= { fsbgp4MpeExtCommRouteExtCommSetStatusEntry 2 }
fsbgp4mpeExtCommSetStatusIpNetwork OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of the destination"
::= { fsbgp4MpeExtCommRouteExtCommSetStatusEntry 3 }
fsbgp4mpeExtCommSetStatusIpPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP prefix length of the destination"
::= { fsbgp4MpeExtCommRouteExtCommSetStatusEntry 4 }
fsbgp4mpeExtCommSetStatus OBJECT-TYPE
SYNTAX INTEGER {
none (1),
set (2),
setnone (3),
modify (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ext-Community Set status for the Route.
o none - is for read-only
o set - to send only with configured additive ext-communities
o setnone - to send without ext-communities,
o modify - to strip delete ext-communities in received extended
communities and add additive ext-communities.
This object can be set only if fsbgp4LocalAs is configured."
DEFVAL { 4 }
::= { fsbgp4MpeExtCommRouteExtCommSetStatusEntry 5 }
fsbgp4mpeExtCommSetStatusRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status to create entries into this table. This object can be set only
if fsbgp4LocalAs is configured."
::= { fsbgp4MpeExtCommRouteExtCommSetStatusEntry 6 }
--- Peer Link Bandwidth Table
--- Represents the link bandwidth for a given peer.
fsbgp4MpePeerLinkBwTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpePeerLinkBwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the link bandwidths for a given peer"
::= {fsbgpMpeExtComm 4}
fsbgp4MpePeerLinkBwEntry OBJECT-TYPE
SYNTAX Fsbgp4MpePeerLinkBwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Peer Link Bandwidth Table Entry"
INDEX { fsbgp4mpePeerLinkType,
fsbgp4mpePeerLinkRemAddr
}
::= { fsbgp4MpePeerLinkBwTable 1 }
Fsbgp4MpePeerLinkBwEntry ::= SEQUENCE {
fsbgp4mpePeerLinkType
InetAddressType,
fsbgp4mpePeerLinkRemAddr
InetAddress,
fsbgp4mpeLinkBandWidth
Unsigned32,
fsbgp4mpePeerLinkBwRowStatus
RowStatus
}
fsbgp4mpePeerLinkType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI of IP address of the Peer"
::= { fsbgp4MpePeerLinkBwEntry 1 }
fsbgp4mpePeerLinkRemAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of the Peer"
::= { fsbgp4MpePeerLinkBwEntry 2 }
fsbgp4mpeLinkBandWidth OBJECT-TYPE
SYNTAX Unsigned32 (7000..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Link Bandwidth in bytes per second.This object can be set only if
fsbgp4LocalAs is configured."
::= { fsbgp4MpePeerLinkBwEntry 3 }
fsbgp4mpePeerLinkBwRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status to create entries into this table.
This object can be set only if fsbgp4LocalAs is configured."
::= { fsbgp4MpePeerLinkBwEntry 4 }
-- MIB FOR FSBGP_EXTCOMM end
-- MIB FOR FSBGP_CABILITIES
fsbgpMpeCaps OBJECT IDENTIFIER ::= {fsbgp 31}
--- Supported Capabilities Table
fsbgp4MpeCapSupportedCapsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeCapSupportedCapsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Supported Capabilities Table. This table contains, the capabilities
that are supported for particular peer"
::= {fsbgpMpeCaps 1 }
fsbgp4MpeCapSupportedCapsEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeCapSupportedCapsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains supported Capabilites"
INDEX { fsbgp4mpeCapPeerType,
fsbgp4mpeCapPeerRemoteIpAddr,
fsbgp4mpeSupportedCapabilityCode,
fsbgp4mpeSupportedCapabilityLength,
fsbgp4mpeSupportedCapabilityValue
}
::= { fsbgp4MpeCapSupportedCapsTable 1 }
Fsbgp4MpeCapSupportedCapsEntry ::= SEQUENCE {
fsbgp4mpeCapPeerType
InetAddressType,
fsbgp4mpeCapPeerRemoteIpAddr
InetAddress,
fsbgp4mpeSupportedCapabilityCode
Integer32,
fsbgp4mpeSupportedCapabilityLength
Integer32,
fsbgp4mpeSupportedCapabilityValue
OCTET STRING,
fsbgp4mpeCapSupportedCapsRowStatus
RowStatus,
fsbgp4mpeCapAnnouncedStatus
INTEGER,
fsbgp4mpeCapReceivedStatus
INTEGER,
fsbgp4mpeCapNegotiatedStatus
INTEGER,
fsbgp4mpeCapConfiguredStatus
INTEGER
}
fsbgp4mpeCapPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The remote IP Address of Peer "
::= { fsbgp4MpeCapSupportedCapsEntry 1 }
fsbgp4mpeCapPeerRemoteIpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The remote IP Address of Peer "
::= { fsbgp4MpeCapSupportedCapsEntry 2 }
fsbgp4mpeSupportedCapabilityCode OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP-4 Capability Advertisement Capability Code that is supported for
peer."
::= { fsbgp4MpeCapSupportedCapsEntry 3 }
fsbgp4mpeSupportedCapabilityLength OBJECT-TYPE
SYNTAX Integer32 (0..251)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the supported Capability data. Currently the
max size is set as 16. Update the BGP_MAX_CAP_DATA_SIZE in
inc/system.size file or BGP_DEF_MAX_CAP_DATA_SIZE in
inc/size.h to increase this MAX value."
::= { fsbgp4MpeCapSupportedCapsEntry 5 }
fsbgp4mpeSupportedCapabilityValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the supported Capability"
::= { fsbgp4MpeCapSupportedCapsEntry 6 }
fsbgp4mpeCapSupportedCapsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The variable displays the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative."
::= { fsbgp4MpeCapSupportedCapsEntry 7 }
fsbgp4mpeCapAnnouncedStatus OBJECT-TYPE
SYNTAX INTEGER {
announced (1),
notAnnounced (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The variable displays the status whether the capability is
announced to the peer or not."
::= { fsbgp4MpeCapSupportedCapsEntry 8 }
fsbgp4mpeCapReceivedStatus OBJECT-TYPE
SYNTAX INTEGER {
received (1),
notReceived (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The variable displays the status whether the capability is
received from the peer or not."
::= { fsbgp4MpeCapSupportedCapsEntry 9 }
fsbgp4mpeCapNegotiatedStatus OBJECT-TYPE
SYNTAX INTEGER {
negotiated (1),
notNegotiated(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The variable displays the status whether the capability is
Negotiated to the peer or not."
::= { fsbgp4MpeCapSupportedCapsEntry 10 }
fsbgp4mpeCapConfiguredStatus OBJECT-TYPE
SYNTAX INTEGER {
configured (1),
automatic (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The variable displays the status whether the capability is
enabled by default or through configuration"
::= { fsbgp4MpeCapSupportedCapsEntry 11 }
-- MIB FOR Route Refresh STARTS
fsbgp4MpeRtRefresh OBJECT IDENTIFIER ::= {fsbgp 32}
-- Route Refresh Inbound Table
fsbgp4MpeRtRefreshInboundTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeRtRefreshInboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route Refresh Inbound Table"
::= { fsbgp4MpeRtRefresh 1 }
fsbgp4MpeRtRefreshInboundEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeRtRefreshInboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry corresponds to Route Refresh Inbound."
INDEX {
fsbgp4mpeRtRefreshInboundPeerType,
fsbgp4mpeRtRefreshInboundPeerAddr,
fsbgp4mpeRtRefreshInboundAfi,
fsbgp4mpeRtRefreshInboundSafi
}
::= { fsbgp4MpeRtRefreshInboundTable 1 }
Fsbgp4MpeRtRefreshInboundEntry ::= SEQUENCE {
fsbgp4mpeRtRefreshInboundPeerType
InetAddressType,
fsbgp4mpeRtRefreshInboundPeerAddr
InetAddress,
fsbgp4mpeRtRefreshInboundAfi
InetAddressType,
fsbgp4mpeRtRefreshInboundSafi
BgpSafi,
fsbgp4mpeRtRefreshInboundRequest
INTEGER,
fsbgp4mpeRtRefreshInboundPrefixFilter
INTEGER
}
fsbgp4mpeRtRefreshInboundPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address Family Identifier of the peer remote address"
::= { fsbgp4MpeRtRefreshInboundEntry 1 }
fsbgp4mpeRtRefreshInboundPeerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the peer for which the Route Refresh request has to
be issued."
::= { fsbgp4MpeRtRefreshInboundEntry 2 }
fsbgp4mpeRtRefreshInboundAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The AFI for which the Route-Refresh message is to be sent"
::= { fsbgp4MpeRtRefreshInboundEntry 3 }
fsbgp4mpeRtRefreshInboundSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SAFI for which the Route-Refresh message is to be sent"
::= { fsbgp4MpeRtRefreshInboundEntry 4 }
fsbgp4mpeRtRefreshInboundRequest OBJECT-TYPE
SYNTAX INTEGER
{
true (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object triggers the sending of the Route Refresh message
to the peer. This object will be cleared once the Route Refresh message
is sent to the peer. Route-Refresh message support is a default feature
If not negotiated via capability negotiation, inbound soft-reconfig is
internally done on setting this object."
::= { fsbgp4MpeRtRefreshInboundEntry 5 }
fsbgp4mpeRtRefreshInboundPrefixFilter OBJECT-TYPE
SYNTAX INTEGER
{
true (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object triggers the sending of the ORF entris in the
Route Refresh message to the peer. This object will be cleared once
the ORF message is sent to the peer. Get operation of this object will always return
zero."
::= { fsbgp4MpeRtRefreshInboundEntry 6 }
--
-- Route Refresh Statistics Table
--
fsbgp4MpeRtRefreshStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeRtRefreshStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route Refresh Statistics Table"
::= { fsbgp4MpeRtRefresh 2 }
fsbgp4MpeRtRefreshStatisticsEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeRtRefreshStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry gives the statistics of Route Refresh."
INDEX {
fsbgp4mpeRtRefreshStatisticsPeerType,
fsbgp4mpeRtRefreshStatisticsPeerAddr,
fsbgp4mpeRtRefreshStatisticsAfi,
fsbgp4mpeRtRefreshStatisticsSafi
}
::= { fsbgp4MpeRtRefreshStatisticsTable 1 }
Fsbgp4MpeRtRefreshStatisticsEntry ::= SEQUENCE {
fsbgp4mpeRtRefreshStatisticsPeerType
InetAddressType,
fsbgp4mpeRtRefreshStatisticsPeerAddr
InetAddress,
fsbgp4mpeRtRefreshStatisticsAfi
InetAddressType,
fsbgp4mpeRtRefreshStatisticsSafi
BgpSafi,
fsbgp4mpeRtRefreshStatisticsRtRefMsgSentCntr
Counter32,
fsbgp4mpeRtRefreshStatisticsRtRefMsgTxErrCntr
Counter32,
fsbgp4mpeRtRefreshStatisticsRtRefMsgRcvdCntr
Counter32,
fsbgp4mpeRtRefreshStatisticsRtRefMsgInvalidCntr
Counter32
}
fsbgp4mpeRtRefreshStatisticsPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address Family Identifier of the peer remote address."
::= { fsbgp4MpeRtRefreshStatisticsEntry 1 }
fsbgp4mpeRtRefreshStatisticsPeerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the peer for which the Route Refresh Statistics has
to be read."
::= { fsbgp4MpeRtRefreshStatisticsEntry 2 }
fsbgp4mpeRtRefreshStatisticsAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI for for which the Route Refresh Statistics has
to be read."
::= { fsbgp4MpeRtRefreshStatisticsEntry 3 }
fsbgp4mpeRtRefreshStatisticsSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SAFI for for which the Route Refresh Statistics has
to be read."
::= { fsbgp4MpeRtRefreshStatisticsEntry 4 }
fsbgp4mpeRtRefreshStatisticsRtRefMsgSentCntr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of Route Refresh messages sent to the peer."
::= { fsbgp4MpeRtRefreshStatisticsEntry 5 }
fsbgp4mpeRtRefreshStatisticsRtRefMsgTxErrCntr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of Route Refresh messages that could not be
transmitted to the peer."
::= { fsbgp4MpeRtRefreshStatisticsEntry 6 }
fsbgp4mpeRtRefreshStatisticsRtRefMsgRcvdCntr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of Route Refresh messages received from the peer."
::= { fsbgp4MpeRtRefreshStatisticsEntry 7 }
fsbgp4mpeRtRefreshStatisticsRtRefMsgInvalidCntr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of invalid Route Refresh messages received from the peer."
::= { fsbgp4MpeRtRefreshStatisticsEntry 8 }
-- MIB FOR OutBound Soft-Reconfig STARTS
fsbgp4MpeSoftReconfigOut OBJECT IDENTIFIER ::= {fsbgp 33}
fsbgp4MpeSoftReconfigOutboundTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpeSoftReconfigOutboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Soft Reconfig outbound Table"
::= { fsbgp4MpeSoftReconfigOut 1 }
fsbgp4MpeSoftReconfigOutboundEntry OBJECT-TYPE
SYNTAX Fsbgp4MpeSoftReconfigOutboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry corresponds to Soft Reconfig outbound."
INDEX {
fsbgp4mpeSoftReconfigOutboundPeerType,
fsbgp4mpeSoftReconfigOutboundPeerAddr,
fsbgp4mpeSoftReconfigOutboundAfi,
fsbgp4mpeSoftReconfigOutboundSafi
}
::= { fsbgp4MpeSoftReconfigOutboundTable 1 }
Fsbgp4MpeSoftReconfigOutboundEntry ::= SEQUENCE {
fsbgp4mpeSoftReconfigOutboundPeerType
InetAddressType,
fsbgp4mpeSoftReconfigOutboundPeerAddr
InetAddress,
fsbgp4mpeSoftReconfigOutboundAfi
InetAddressType,
fsbgp4mpeSoftReconfigOutboundSafi
BgpSafi,
fsbgp4mpeSoftReconfigOutboundRequest
INTEGER
}
fsbgp4mpeSoftReconfigOutboundPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address Family Identifier of the peer remote address"
::= { fsbgp4MpeSoftReconfigOutboundEntry 1 }
fsbgp4mpeSoftReconfigOutboundPeerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the peer for which the outbound soft-reconfig has to
be performed."
::= { fsbgp4MpeSoftReconfigOutboundEntry 2 }
fsbgp4mpeSoftReconfigOutboundAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AFI for which the outbound soft-reconfig has to
be performed."
::= { fsbgp4MpeSoftReconfigOutboundEntry 3 }
fsbgp4mpeSoftReconfigOutboundSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SAFI for which the outbound soft-reconfig has to
be performed."
::= { fsbgp4MpeSoftReconfigOutboundEntry 4 }
fsbgp4mpeSoftReconfigOutboundRequest OBJECT-TYPE
SYNTAX INTEGER
{
true (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object triggers the outbound soft-reconfig process for the peer. This object value is cleared once the soft-reconfig process is
completed."
::= { fsbgp4MpeSoftReconfigOutboundEntry 5 }
--
-- Prefix counter table
--
fsbgp4MpePrefixCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MpePrefixCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional per-peer, per AFI/SAFI counters for prefixes"
::= { fsbgp 34 }
fsbgp4MpePrefixCountersEntry OBJECT-TYPE
SYNTAX Fsbgp4MpePrefixCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about a bgp-peer's prefix
counters."
INDEX {
fsbgp4MpePeerRemoteAddrType,
fsbgp4MpePeerRemoteAddr,
fsbgp4MpePrefixCountersAfi,
fsbgp4MpePrefixCountersSafi
}
::= { fsbgp4MpePrefixCountersTable 1 }
Fsbgp4MpePrefixCountersEntry ::= SEQUENCE {
fsbgp4MpePeerRemoteAddrType
InetAddressType,
fsbgp4MpePeerRemoteAddr
InetAddress,
fsbgp4MpePrefixCountersAfi
InetAddressType,
fsbgp4MpePrefixCountersSafi
BgpSafi,
fsbgp4MpePrefixCountersPrefixesReceived
Counter32,
fsbgp4MpePrefixCountersPrefixesSent
Counter32,
fsbgp4MpePrefixCountersWithdrawsReceived
Counter32,
fsbgp4MpePrefixCountersWithdrawsSent
Counter32,
fsbgp4MpePrefixCountersInPrefixes
Gauge32,
fsbgp4MpePrefixCountersInPrefixesAccepted
Gauge32,
fsbgp4MpePrefixCountersInPrefixesRejected
Gauge32,
fsbgp4MpePrefixCountersOutPrefixes
Gauge32
}
fsbgp4MpePeerRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the remote address of peer."
::= { fsbgp4MpePrefixCountersEntry 1 }
fsbgp4MpePeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The remote address of the peer."
::= { fsbgp4MpePrefixCountersEntry 2 }
fsbgp4MpePrefixCountersAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The AFI index of the per-peer, per prefix counters"
::= { fsbgp4MpePrefixCountersEntry 3 }
fsbgp4MpePrefixCountersSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SAFI index of the per-peer, per prefix counters"
::= { fsbgp4MpePrefixCountersEntry 4 }
fsbgp4MpePrefixCountersPrefixesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of discrete prefixes received from this peer. The
value in fsbgp4MpePrefixCountersPrefixesReceived will be greater
than or equal to what is in fsbgp4MpePrefixCountersInPrefixes,
since it will reflect prefixes received from this peer which
may have been subsquently withdrawn, and hence will no longer
be stored in the Adj-Ribs-In for that peer."
::= { fsbgp4MpePrefixCountersEntry 5 }
fsbgp4MpePrefixCountersPrefixesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of prefixes which the local BGP speaker
has announced to this peer. The value for
fsbgp4MpePrefixCountersPrefixesSent will be greater than or equal to
fsbgp4MpePrefixCountersOutPrefixes, since it reflects prefixes
which have been subsequently withdrawn after their announcement
(assuming any such withdrawn prefixes exist)."
::= { fsbgp4MpePrefixCountersEntry 6 }
fsbgp4MpePrefixCountersWithdrawsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of prefixes withdrawn by this peer. Specifically,
this is the total number of withdrawn-routes which have
been received in UPDATE messages from this peer."
::= { fsbgp4MpePrefixCountersEntry 7 }
fsbgp4MpePrefixCountersWithdrawsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of prefixes which have been reported as
withdrawn by the local BGP speaker to the peer in
locally generated UPDATE messages to the peer."
::= { fsbgp4MpePrefixCountersEntry 8 }
fsbgp4MpePrefixCountersInPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes received from a peer and are
stored in the Adj-Ribs-In for that peer."
-- jmh - note that we're allowing stuff to be discarded
::= { fsbgp4MpePrefixCountersEntry 9 }
fsbgp4MpePrefixCountersInPrefixesAccepted OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are eligible to become active
in the Loc-Rib."
::= { fsbgp4MpePrefixCountersEntry 10 }
fsbgp4MpePrefixCountersInPrefixesRejected OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are NOT eligible to become active
in the Loc-Rib."
::= { fsbgp4MpePrefixCountersEntry 11 }
fsbgp4MpePrefixCountersOutPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in that peer's Adj-Ribs-Out."
::= { fsbgp4MpePrefixCountersEntry 12 }
--**************************************************************************
-- MIB for BGP/MPLS VPN starts.
fsbgp4MplsVpn OBJECT IDENTIFIER ::= {fsbgp 35}
-- Fsbgp4MplsVpnRouteTargetTable
fsbgp4MplsVpnVrfRouteTargetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MplsVpnVrfRouteTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-VRF route target association.
Each entry identifies a connectivity policy supported
as part of a VPN."
::= { fsbgp4MplsVpn 1 }
fsbgp4MplsVpnVrfRouteTargetEntry OBJECT-TYPE
SYNTAX Fsbgp4MplsVpnVrfRouteTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR (PE router)
for each route target configured for a VRF supporting
a MPLS/BGP VPN instance. The indexing provides an
ordering per-VRF instance."
INDEX { fsbgp4MplsVpnVrfName, fsbgp4MplsVpnVrfRouteTargetType,
fsbgp4MplsVpnVrfRouteTarget }
::= { fsbgp4MplsVpnVrfRouteTargetTable 1 }
Fsbgp4MplsVpnVrfRouteTargetEntry ::= SEQUENCE {
fsbgp4MplsVpnVrfName DisplayString,
fsbgp4MplsVpnVrfRouteTargetType INTEGER,
fsbgp4MplsVpnVrfRouteTarget DisplayString,
fsbgp4MplsVpnVrfRouteTargetRowStatus RowStatus
}
fsbgp4MplsVpnVrfName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The human-readable name of this VPN. This MAY be equivalent to the
RFC2685 VPN-ID, but may also vary. If it is set to the VPN ID, it MUST
be equivalent to the value of mplsVpnVrfVpnId. It is strongly
recommended that all sites supporting VRFs that are part of the same
VPN use the same naming convention for VRFs as well as the same VPN ID."
::= { fsbgp4MplsVpnVrfRouteTargetEntry 1 }
fsbgp4MplsVpnVrfRouteTargetType OBJECT-TYPE
SYNTAX INTEGER { import(1),
export(2),
both(3) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The route target type. If set to both means, the route target will be
assigned as import target and export target."
::= { fsbgp4MplsVpnVrfRouteTargetEntry 2 }
fsbgp4MplsVpnVrfRouteTarget OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The route target distribution policy."
::= { fsbgp4MplsVpnVrfRouteTargetEntry 3 }
fsbgp4MplsVpnVrfRouteTargetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for this entry."
::= { fsbgp4MplsVpnVrfRouteTargetEntry 4 }
-- Fsbgp4MplsVpnVrfRedistributeTable
fsbgp4MplsVpnVrfRedistributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MplsVpnVrfRedistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-VRF ipv4 redistribution."
::= { fsbgp4MplsVpn 2 }
fsbgp4MplsVpnVrfRedistributeEntry OBJECT-TYPE
SYNTAX Fsbgp4MplsVpnVrfRedistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR (PE router)
for a VRF supporting a MPLS/BGP VPN instance. The indexing
provides an ordering per-VRF instance."
INDEX { fsbgp4MplsVpnVrfRedisAfi, fsbgp4MplsVpnVrfRedisSafi,
fsbgp4MplsVpnVrfName}
::= { fsbgp4MplsVpnVrfRedistributeTable 1 }
Fsbgp4MplsVpnVrfRedistributeEntry ::= SEQUENCE {
fsbgp4MplsVpnVrfRedisAfi InetAddressType,
fsbgp4MplsVpnVrfRedisSafi BgpSafi,
fsbgp4MplsVpnVrfRedisProtoMask Integer32
}
fsbgp4MplsVpnVrfRedisAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address Family Identifier of VPN VRF redistribution and it takes only ipv4"
::= { fsbgp4MplsVpnVrfRedistributeEntry 1 }
fsbgp4MplsVpnVrfRedisSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Subsequent Address Family Identifier of VPN VRF redistribution and
it takes only vpnv4"
::= { fsbgp4MplsVpnVrfRedistributeEntry 2 }
fsbgp4MplsVpnVrfRedisProtoMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit mask of source protocols from which routes are
imported to BGP.(LSB corresponds to Bit 0)
Bit 1, if set, indicates that direct routes can be
redistributed into BGP. (value = 2)
Bit 2, if set, indicates that static routes can be
redistributed into BGP. (value = 4)
Bit 7, if set, indicates that routes from RIP can be
redistributed into BGP. (value = 128)
Bit 12, if set, indicates that OSPF routes can be
redistributed into BGP. (value = 4096)
Other bits are reserved for future use. This object can be
set only if VRF is created already.
If different route protocols to be redistributed, then the
value to be set must be the combination of (total) the
individual protocol redistribution values.
Value of '0' indicates, disabling the redistribution completely"
::= { fsbgp4MplsVpnVrfRedistributeEntry 3 }
-- Fsbgp4MplsVpnRRRouteTargetSetTable
fsbgp4MplsVpnRRRouteTargetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4MplsVpnRRRouteTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Route Reflector Import Route Target set.
If the speaker is a route reflector, the import targets that are
received from client peer, will be mainitained in a set. When there are
no more routes assoiciated with a particular import route target,
then some delay (few hours) will be allowed before deleting that route
target from the set. This table gives the information about the route
targets in the set, and the no.of routes associated individually and the
time after which it will be deleted from the set"
::= { fsbgp4MplsVpn 3 }
fsbgp4MplsVpnRRRouteTargetEntry OBJECT-TYPE
SYNTAX Fsbgp4MplsVpnRRRouteTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created whenever a new import route target
is received along with a route from client peers.
The index to the table is the import route target in the set itself."
INDEX { fsbgp4MplsVpnRRRouteTarget }
::= { fsbgp4MplsVpnRRRouteTargetTable 1 }
Fsbgp4MplsVpnRRRouteTargetEntry ::= SEQUENCE {
fsbgp4MplsVpnRRRouteTarget DisplayString,
fsbgp4MplsVpnRRRouteTargetRtCnt Integer32,
fsbgp4MplsVpnRRRouteTargetTimeStamp Integer32
}
fsbgp4MplsVpnRRRouteTarget OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The import route target in the set."
::= { fsbgp4MplsVpnRRRouteTargetEntry 1 }
fsbgp4MplsVpnRRRouteTargetRtCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The no.of routes received/associated with this route target. i.e no.of
routes that are received with this import route target from client peers"
::= { fsbgp4MplsVpnRRRouteTargetEntry 2 }
fsbgp4MplsVpnRRRouteTargetTimeStamp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time after which the import route target will be removed from the set.
A value of zero indicates, it is not to be deleted. When this value is
a positive number, then the above mib object should be having a value of 0"
::= { fsbgp4MplsVpnRRRouteTargetEntry 3 }
-- FILTERING OBJECT DEFINITION BEGIN
fsbgp4DistInOutRouteMap OBJECT IDENTIFIER ::= { fsbgp 36 }
fsBgp4DistInOutRouteMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsBgp4DistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of filtering for route map."
::= { fsbgp4DistInOutRouteMap 1 }
fsBgp4DistInOutRouteMapEntry OBJECT-TYPE
SYNTAX FsBgp4DistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the filtering configuration of single entry."
INDEX {fsBgp4DistInOutRouteMapName, fsBgp4DistInOutRouteMapType}
::= { fsBgp4DistInOutRouteMapTable 1 }
FsBgp4DistInOutRouteMapEntry ::= SEQUENCE {
fsBgp4DistInOutRouteMapName DisplayString,
fsBgp4DistInOutRouteMapType Integer32,
fsBgp4DistInOutRouteMapValue Integer32,
fsBgp4DistInOutRouteMapRowStatus RowStatus
}
fsBgp4DistInOutRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route map name."
::= { fsBgp4DistInOutRouteMapEntry 1 }
fsBgp4DistInOutRouteMapType OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out"
::= { fsBgp4DistInOutRouteMapEntry 2 }
fsBgp4DistInOutRouteMapValue OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance value ( this will be unused for distribute list )"
::= { fsBgp4DistInOutRouteMapEntry 3 }
fsBgp4DistInOutRouteMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { fsBgp4DistInOutRouteMapEntry 4 }
-- FILTERING OBJECT DEFINITION END
-- PREFERENCE OBJECT DEFINITION BEGIN
fsbgp4PreferenceGroup OBJECT IDENTIFIER ::= { fsbgp 37 }
fsBgp4PreferenceValue OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Preference value for RIP routes. Use '0' to set default value"
DEFVAL { 122 }
::= { fsbgp4PreferenceGroup 1 }
-- PREFERENCE OBJECT DEFINITION END
-- TRAP objects
fsbgp4Notification OBJECT IDENTIFIER ::= {fsbgp 38}
fsbgp4Trap OBJECT IDENTIFIER ::= {fsbgp4Notification 0}
fsbgp4RestartStatusChange NOTIFICATION-TYPE
OBJECTS {
fsbgp4Identifier,
fsbgp4RestartStatus,
fsbgp4GRRestartTimeInterval,
fsbgp4RestartExitReason
}
STATUS current
DESCRIPTION
"A fsbgp4RestartStatusChange trap signifies that there has
been a change in the graceful restart state for the router.
This trap should be generated when the router restart status changes."
::= {fsbgp4Trap 1}
-- ROUTE-MAP ON NEIGHBOUR
fsbgp4NeighborRouteMap OBJECT IDENTIFIER ::= { fsbgp 39 }
fsBgp4NeighborRouteMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsBgp4NeighborRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of route map on a neighbour."
::= { fsbgp4NeighborRouteMap 1 }
fsBgp4NeighborRouteMapEntry OBJECT-TYPE
SYNTAX FsBgp4NeighborRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the routemap configuration of single entry."
INDEX {fsBgp4NeighborRouteMapPeerAddrType, fsBgp4NeighborRouteMapPeer, fsBgp4NeighborRouteMapDirection}
::= { fsBgp4NeighborRouteMapTable 1 }
FsBgp4NeighborRouteMapEntry ::= SEQUENCE {
fsBgp4NeighborRouteMapPeerAddrType InetAddressType,
fsBgp4NeighborRouteMapPeer InetAddress,
fsBgp4NeighborRouteMapDirection INTEGER,
fsBgp4NeighborRouteMapName DisplayString,
fsBgp4NeighborRouteMapRowStatus RowStatus
}
fsBgp4NeighborRouteMapPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Adress type of the Neighbor."
::= { fsBgp4NeighborRouteMapEntry 1 }
fsBgp4NeighborRouteMapPeer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IpAddress of the Neighbor."
::= { fsBgp4NeighborRouteMapEntry 2 }
fsBgp4NeighborRouteMapDirection OBJECT-TYPE
SYNTAX INTEGER{ in(1) ,
out(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Direction of route map to indicate the route map is for in or out.
In direction routemap is to apply the routemap rules for incoming routes from
the peer.Out direction routemap is to apply the routemap for on the
advertising routes to the peer.
1 - in
2 - out"
::= { fsBgp4NeighborRouteMapEntry 3 }
fsBgp4NeighborRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Route map name."
::= { fsBgp4NeighborRouteMapEntry 4 }
fsBgp4NeighborRouteMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { fsBgp4NeighborRouteMapEntry 5 }
-- BGP Peer Group Table
fsBgp4PeerGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsBgp4PeerGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring the bgp peer groups. Configuring
a property for the peer group copies it to all the peers
present in the peer group."
::= { fsbgp 40 }
fsBgp4PeerGroupEntry OBJECT-TYPE
SYNTAX FsBgp4PeerGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describing the bgp peer group."
INDEX { fsBgp4PeerGroupName }
::= { fsBgp4PeerGroupTable 1 }
FsBgp4PeerGroupEntry ::= SEQUENCE {
fsBgp4PeerGroupName DisplayString,
fsBgp4PeerGroupAddrType InetAddressType,
fsBgp4PeerGroupRemoteAs Unsigned32,
fsBgp4PeerGroupHoldTimeConfigured Integer32,
fsBgp4PeerGroupKeepAliveConfigured Integer32,
fsBgp4PeerGroupConnectRetryInterval Integer32,
fsBgp4PeerGroupMinASOriginInterval Integer32,
fsBgp4PeerGroupMinRouteAdvInterval Integer32,
fsBgp4PeerGroupAllowAutomaticStart INTEGER,
fsBgp4PeerGroupAllowAutomaticStop INTEGER,
fsBgp4PeerGroupIdleHoldTimeConfigured Integer32,
fsBgp4PeerGroupDampPeerOscillations INTEGER,
fsBgp4PeerGroupDelayOpen INTEGER,
fsBgp4PeerGroupDelayOpenTimeConfigured Integer32,
fsBgp4PeerGroupPrefixUpperLimit Integer32,
fsBgp4PeerGroupTcpConnectRetryCnt Integer32,
fsBgp4PeerGroupEBGPMultiHop INTEGER,
fsBgp4PeerGroupEBGPHopLimit Integer32,
fsBgp4PeerGroupNextHopSelf INTEGER,
fsBgp4PeerGroupRflClient INTEGER,
fsBgp4PeerGroupTcpSendBufSize Integer32,
fsBgp4PeerGroupTcpRcvBufSize Integer32,
fsBgp4PeerGroupCommSendStatus INTEGER,
fsBgp4PeerGroupECommSendStatus INTEGER,
fsBgp4PeerGroupPassive INTEGER,
fsBgp4PeerGroupDefaultOriginate INTEGER,
fsBgp4PeerGroupActivateMPCapability INTEGER,
fsBgp4PeerGroupDeactivateMPCapability INTEGER,
fsBgp4PeerGroupRouteMapNameIn DisplayString,
fsBgp4PeerGroupRouteMapNameOut DisplayString,
fsBgp4PeerGroupStatus RowStatus,
fsBgp4PeerGroupIpPrefixNameIn DisplayString,
fsBgp4PeerGroupIpPrefixNameOut DisplayString,
fsBgp4PeerGroupOrfType Unsigned32,
fsBgp4PeerGroupOrfCapMode INTEGER,
fsBgp4PeerGroupOrfRequest INTEGER
}
fsBgp4PeerGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group name for this peer group entry."
::= { fsBgp4PeerGroupEntry 1 }
fsBgp4PeerGroupAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of the peers added to this peer group."
::= { fsBgp4PeerGroupEntry 2 }
fsBgp4PeerGroupRemoteAs OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote autonomous system number for this peer group."
::= { fsBgp4PeerGroupEntry 3 }
fsBgp4PeerGroupHoldTimeConfigured OBJECT-TYPE
SYNTAX Integer32 ( 0 | 3..65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval (in seconds) for the Hold Time configured for this
BGP speaker with all the peers configured for this group.
This value is placed in an OPEN message sent to the peers
by this BGP speaker. This value must not be less than three seconds
if it is not zero (0). If it is zero (0), the Hold Time is NOT to be
established with the peer.
The suggested value for this timer is 90 seconds."
::= { fsBgp4PeerGroupEntry 4 }
fsBgp4PeerGroupKeepAliveConfigured OBJECT-TYPE
SYNTAX Integer32 ( 0 | 1..21845 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval (in seconds) for the KeepAlive timer configured for this
BGP speaker with all the peers configured in this group. The value
of this object will only determine the KEEPALIVE messages frequency
relative to the value specified in fsBgp4PeerGroupCfgHoldTime.
A reasonable maximum value for this timer would be one third of that
of fsBgp4PeerGroupCfgHoldTime. If the value of this object is zero (0),
no periodical KEEPALIVE messages are sent to the peers after the
BGP connection is established.
The suggested value for this timer is 30 seconds."
::= { fsBgp4PeerGroupEntry 5 }
fsBgp4PeerGroupConnectRetryInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the ConnectRetry timer for the peers
in this group. The suggested value for this timer is 120 seconds."
::= { fsBgp4PeerGroupEntry 6 }
fsBgp4PeerGroupMinASOriginInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval (in seconds) for the MinASOriginationInterval
timer for all peers configured in this group.
The suggested value for this timer is 15 seconds."
::= { fsBgp4PeerGroupEntry 7 }
fsBgp4PeerGroupMinRouteAdvInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval (in seconds) for the MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30 seconds for EBGP connections
and 5 seconds for IBGP connections."
::= { fsBgp4PeerGroupEntry 8 }
fsBgp4PeerGroupAllowAutomaticStart OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object specifies whether BGP session with the peers in the
peer group can be started automatically. This object when set to
'disabled', requires manual start for initiating BGP session with the peer via
MIB object 'fsBgp4PeerGroupAdminStatus'. When set to 'enabled',
the peer session can be automatically started in the IDLE state,
after a BGP Peer session is brought down either by Autostop or via
reception of invalid BGP message. The BGP session will be automatically
started after an interval specified by
'fsBgp4PeerGroupIdleHoldTimeConfigured'. If
fsBgp4PeerGroupDampPeerOscillations is enabled, then automaticStart will not
occur if peer is damped."
DEFVAL { disable }
::= { fsBgp4PeerGroupEntry 9 }
fsBgp4PeerGroupAllowAutomaticStop OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object specifies whether BGP session with the peers in the
peer group need to be automatically stopped after a TCP connect-retry
count value specified by 'fsBgp4PeerGroupTcpConnectRetryCnt'.
The resources allocated for the BGP peers are released and it
continues to remain in IDLE state. After an automatic stop,
the Peer connection needs to be re-intiated manually by the
administrator. When AutomaticStop is disabled, the connect retry
count value is set to 0."
DEFVAL { disable }
::= { fsBgp4PeerGroupEntry 10 }
fsBgp4PeerGroupIdleHoldTimeConfigured OBJECT-TYPE
SYNTAX Integer32 ( 1..65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IdleHoldTime specifies the length of time the BGP peers in this
peer group is held in Idle state prior to allowing the next
automatic restart. The IdleHoldTime is configured only when the
fsBgp4PeerGroupAllowAutomaticStart is Enabled or when the
fsBgp4PeerGroupDampPeerOscillations is Enabled. The configurable value
differs based on the two options that are enabled.The Suggested default
value is 60 secs for automatic start. After each dampening, the value
of the IdleHoldTime is doubled consecutively."
DEFVAL { 60 }
::= { fsBgp4PeerGroupEntry 11 }
fsBgp4PeerGroupDampPeerOscillations OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DampPeerOscillations option specifies that the implementation
engages additional logic to damp the oscillations of BGP peers in
the face of series of automatic start and automatic stop operations
in the IDLE state.The DampPeerOscillations option indicates that the
BGP connection is using logic that damps BGP peer oscillations in
states other than 'established' state."
DEFVAL { disable }
::= { fsBgp4PeerGroupEntry 12 }
fsBgp4PeerGroupDelayOpen OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object allows configuration option to enable/disable delay
in sending of OPEN messages to the BGP peers for a specific time period
(DelayOpenTime). The delay allows the remote BGP Peers to send the first
OPEN message."
DEFVAL { disable }
::= { fsBgp4PeerGroupEntry 13 }
fsBgp4PeerGroupDelayOpenTimeConfigured OBJECT-TYPE
SYNTAX Integer32 ( 0..65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DelayOpen time specifies the amount of time the BGP Peers should
delay in sending the OPEN message to the remote peers. If the
fsBgp4PeerGroupDelayOpen option is enabled, the DelayOpen time can be
configured. The default value is kept as 0 secs, which implies that
the BGP Peers can send an OPEN message without any delay to its
neighbor."
DEFVAL { 0 }
::= { fsBgp4PeerGroupEntry 14 }
fsBgp4PeerGroupPrefixUpperLimit OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP speaker imposes a locally-configured, upper bound on the number of
address prefixes the speaker is willing to accept from a neighbor. The
default value is calculated as the following:
fsbgp4MaxNoofRoutes / fsbgp4MaxPeerEntry
Administrator can configure a value less than the default value at
runtime. Prefixes exceeding the PrefixUpperLimit will not be processed
by the system."
DEFVAL { 100 }
::= { fsBgp4PeerGroupEntry 15 }
fsBgp4PeerGroupTcpConnectRetryCnt OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This counter denotes the Maximum number of times the BGP Peers have
tried to issue a TCP-Connect with its neighboring peers.
The default value for the counter is set as 5."
DEFVAL { 5 }
::= { fsBgp4PeerGroupEntry 16 }
fsBgp4PeerGroupEBGPMultiHop OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected. By default, only directly connected EBGP peers are allowed.
The configuration of this object has effect only when the peers added to
this peer group are of EBGP type."
::= { fsBgp4PeerGroupEntry 17 }
fsBgp4PeerGroupEBGPHopLimit OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected and seperated by a maximum hop limit as configured by this
object. The configuration of this object has effect only when the peers added to
this peer group are of EBGP type."
::= { fsBgp4PeerGroupEntry 18 }
fsBgp4PeerGroupNextHopSelf OBJECT-TYPE
SYNTAX INTEGER
{
automatic(1),
self(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies how the next hop attribute sent in the update
messages to the peers in this peer group. When the object takes the
value of self,the next Hop attribute will always be the sender Local
Address else the next hop will be generated based on the IP address of
the destination and the present next hop in the route information."
DEFVAL { automatic }
::= { fsBgp4PeerGroupEntry 19 }
fsBgp4PeerGroupRflClient OBJECT-TYPE
SYNTAX INTEGER
{
nonClient (1),
client (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the peers in this peer group are
Client peers or Non-Client peers. By default, the peers are
created as Non-Client Peer. "
DEFVAL { nonClient }
::= { fsBgp4PeerGroupEntry 20 }
fsBgp4PeerGroupTcpSendBufSize OBJECT-TYPE
SYNTAX Integer32 (4096..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the tcp window size on the sender side
for all the peers in this peer group."
DEFVAL { 65536 }
::= { fsBgp4PeerGroupEntry 21 }
fsBgp4PeerGroupTcpRcvBufSize OBJECT-TYPE
SYNTAX Integer32 (4096..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the tcp window size on the receiver side
for all the peers in this peer group."
DEFVAL { 65536 }
::= { fsBgp4PeerGroupEntry 22 }
fsBgp4PeerGroupCommSendStatus OBJECT-TYPE
SYNTAX INTEGER
{
none (1),
send (2),
donotsend (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Community Send status for the peers in this peer group.
o none - is for read-only
o send - send communities to this peer
o donotsend - do not send communities to this peer."
DEFVAL { send }
::= { fsBgp4PeerGroupEntry 23 }
fsBgp4PeerGroupECommSendStatus OBJECT-TYPE
SYNTAX INTEGER
{
none (1),
send (2),
donotsend (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Extended Community Send status for the peers in this peer group.
o none - is for read-only
o send - send extended communities to this peer
o donotsend - do not send extended communities to this peer."
DEFVAL { send }
::= { fsBgp4PeerGroupEntry 24 }
fsBgp4PeerGroupPassive OBJECT-TYPE
SYNTAX INTEGER
{
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the peers in this group to be active,
that means the speaker will not initiate the session with the peers
instead it waits for the remote peers to initiate the session"
::= { fsBgp4PeerGroupEntry 25 }
fsBgp4PeerGroupDefaultOriginate OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the advertisement
of the default route to all the peers in this peer group.
This object overrides the global default route configuration
(fsbgp4DefaultOriginate) and always send a default
route to the peer with self next-hop. This advertisement occurs
irrespective of the presence of default route in FDB. This object can
be set only if the fsbgp4LocalAs is set."
DEFVAL { disable }
::= { fsBgp4PeerGroupEntry 26 }
fsBgp4PeerGroupActivateMPCapability OBJECT-TYPE
SYNTAX INTEGER
{
ipv4unicast(1),
ipv6unicast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is set to activate the corresponding MP Capability.
If any of MP Capability is activated, then this capability should
be negotiated while establishing session with the peers in this group.
Any get on this object will return only ZERO."
::= { fsBgp4PeerGroupEntry 27 }
fsBgp4PeerGroupDeactivateMPCapability OBJECT-TYPE
SYNTAX INTEGER
{
ipv4unicast(1),
ipv6unicast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is set to deactivate the corresponding MP Capability.
If any of MP Capability is deactivated, then this capability should
not be negotiated while establishing session with the peers in this group.
Any get on this object will return only ZERO."
::= { fsBgp4PeerGroupEntry 28 }
fsBgp4PeerGroupRouteMapNameIn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the in routemap for this peer group entry."
::= { fsBgp4PeerGroupEntry 29 }
fsBgp4PeerGroupRouteMapNameOut OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the out routemap for this peer group entry."
::= { fsBgp4PeerGroupEntry 30 }
fsBgp4PeerGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create the peer group or delete the group."
::= { fsBgp4PeerGroupEntry 31 }
fsBgp4PeerGroupIpPrefixNameIn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the IP Prefix list name in IN direction for this peer group entry."
::= { fsBgp4PeerGroupEntry 32 }
fsBgp4PeerGroupIpPrefixNameOut OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the IP Prefix list name in OUT direction for this peer group entry."
::= { fsBgp4PeerGroupEntry 33 }
fsBgp4PeerGroupOrfType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the ORF type supported for this peer group entry.
This object should be set before enabling the ORF mode fsBgp4PeerGroupOrfCapMode.
Now the Address Prefix ORF type (value 64) is only supported"
::= { fsBgp4PeerGroupEntry 34 }
fsBgp4PeerGroupOrfCapMode OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
receive (1),
send (2),
both (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the ORF Capability mode supported for this peer group entry.
If it is set to ZERO, then the both ORF modes will be disabled"
::= { fsBgp4PeerGroupEntry 35 }
fsBgp4PeerGroupOrfRequest OBJECT-TYPE
SYNTAX INTEGER {
true (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to trigger the ORF messages to the peers associated with this peer group entry.
Once the ORF messags are transmitted, this object will be cleared.
Get operation of this object will always return ZERO."
::= { fsBgp4PeerGroupEntry 36 }
fsBgp4PeerGroupListTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsBgp4PeerGroupListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for adding/removing the bgp peers to a peer group."
::= { fsbgp 41 }
fsBgp4PeerGroupListEntry OBJECT-TYPE
SYNTAX FsBgp4PeerGroupListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describing the bgp peer group list."
INDEX { fsBgp4PeerGroupName, fsBgp4PeerAddrType, fsBgp4PeerAddress }
::= { fsBgp4PeerGroupListTable 1 }
FsBgp4PeerGroupListEntry ::= SEQUENCE {
fsBgp4PeerAddrType InetAddressType,
fsBgp4PeerAddress InetAddress,
fsBgp4PeerAddStatus INTEGER
}
fsBgp4PeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the address type of the BGP peer entry
added to this peer group entry"
::= { fsBgp4PeerGroupListEntry 1 }
fsBgp4PeerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the remote address of the BGP peer entry
added to this peer group entry"
::= { fsBgp4PeerGroupListEntry 2 }
fsBgp4PeerAddStatus OBJECT-TYPE
SYNTAX INTEGER
{
add(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to add or remove the bgp peer specified through
fsBgp4PeerAddress to this bgp peer group entry."
::= { fsBgp4PeerGroupListEntry 3 }
fsBgp4TestGroup OBJECT IDENTIFIER ::= {fsbgp 45}
fsBgp4RmTestObject OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for testing of RM bulk update scenarios.
users cannot set or retrive this object"
::= { fsBgp4TestGroup 1 }
-- MIB for TCP AO Authentication starts
fsbgp4TCPMKTAuth OBJECT IDENTIFIER ::= {fsbgp 42}
-- TCP MKT(Master Key Tuple) Authentication Table
fsbgp4TCPMKTAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4TCPMKTAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TCP MKT Authentication Table, used for configuring MKT for TCP-AO
authentication, supported algorithms HMAC-SHA-1 and AES-128-CMAC"
::= { fsbgp4TCPMKTAuth 1 }
fsbgp4TCPMKTAuthEntry OBJECT-TYPE
SYNTAX Fsbgp4TCPMKTAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry corresponds to the TCP MKT parameters"
INDEX {
fsbgp4TCPMKTAuthKeyId
}
::= { fsbgp4TCPMKTAuthTable 1 }
Fsbgp4TCPMKTAuthEntry ::= SEQUENCE {
fsbgp4TCPMKTAuthKeyId
Integer32,
fsbgp4TCPMKTAuthRecvKeyId
Integer32,
fsbgp4TCPMKTAuthMasterKey
OCTET STRING,
fsbgp4TCPMKTAuthAlgo
INTEGER,
fsbgp4TCPMKTAuthTcpOptExc
TruthValue,
fsbgp4TCPMKTAuthRowStatus
RowStatus
}
fsbgp4TCPMKTAuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Send KeyID of the MKT. This object value is used to fill the key-id
field in the TCP-AO option in the TCP header"
::= { fsbgp4TCPMKTAuthEntry 1 }
fsbgp4TCPMKTAuthRecvKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receive Key-id of the MKT. Receive Key-id of the MKT.
The MKT that is ready at the sender to
be used to authenticate received segments is indicated to the
peer by filling the receive key id of the MKT in the RNExtKeyId
field of the TCP-AO option in TCP header."
::= { fsbgp4TCPMKTAuthEntry 2 }
fsbgp4TCPMKTAuthMasterKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Master Key corresponding to the MKT"
::= { fsbgp4TCPMKTAuthEntry 3 }
fsbgp4TCPMKTAuthAlgo OBJECT-TYPE
SYNTAX INTEGER
{
hmacSha1(1),
aes128Cmac(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Algorithm used for TCP-AO MAC or KDF calculation, allowed
algorithms are HMAC-SHA-1 & AES-128-CMAC,
default value is HMAC-SHA-1 "
DEFVAL { hmacSha1 }
::= { fsbgp4TCPMKTAuthEntry 4 }
fsbgp4TCPMKTAuthTcpOptExc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Exclude TCP options other than TCP-AO during MAC calculation,
if fsMIBgp4TCPMKTAuthTcpOptExc is not set TCP-AO MAC will
be calculated on tcp segment including all other TCP options"
::= { fsbgp4TCPMKTAuthEntry 5 }
fsbgp4TCPMKTAuthRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable represents the status of the MKT entry, can
have values allowed for RowStatus, eg. createAndGo, destroy etc "
::= { fsbgp4TCPMKTAuthEntry 6 }
--MIB for TCP-AO config for BGP peers
fsbgp4TCPAOAuthPeer OBJECT IDENTIFIER ::= {fsbgp 43}
--BGP TCP-AO config Table
fsbgp4TCPAOAuthPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fsbgp4TCPAOAuthPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TCP-AO Peer config Table"
::= { fsbgp4TCPAOAuthPeer 1 }
fsbgp4TCPAOAuthPeerEntry OBJECT-TYPE
SYNTAX Fsbgp4TCPAOAuthPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry corresponds to the TCP-AO configs for peer,
Support for associating one keyId(MKT) per peer is available at
present. If a new keyId/MKT is associated with a peer which
already has one associated keyId/MKT, existing values will
be overwritten with new one.
Configuration support for start accept, start generate, stop accept
and stop generate are not available currently"
INDEX {
fsbgp4TCPAOAuthPeerType,
fsbgp4TCPAOAuthPeerAddr,
fsbgp4TCPAOAuthKeyId
}
::= { fsbgp4TCPAOAuthPeerTable 1 }
Fsbgp4TCPAOAuthPeerEntry ::= SEQUENCE {
fsbgp4TCPAOAuthPeerType
InetAddressType,
fsbgp4TCPAOAuthPeerAddr
InetAddress,
fsbgp4TCPAOAuthKeyId
Integer32,
fsbgp4TCPAOAuthKeyStatus
INTEGER,
fsbgp4TCPAOAuthKeyStartAccept
DateAndTime,
fsbgp4TCPAOAuthKeyStartGenerate
DateAndTime,
fsbgp4TCPAOAuthKeyStopGenerate
DateAndTime,
fsbgp4TCPAOAuthKeyStopAccept
DateAndTime
}
fsbgp4TCPAOAuthPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type of the peer IP address"
::= { fsbgp4TCPAOAuthPeerEntry 1 }
fsbgp4TCPAOAuthPeerAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (1 .. 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this the peer for which TCP-AO config is done"
::= { fsbgp4TCPAOAuthPeerEntry 2 }
fsbgp4TCPAOAuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0 .. 255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Key id of the MKT which need to be associated with the peer"
::= { fsbgp4TCPAOAuthPeerEntry 3 }
fsbgp4TCPAOAuthKeyStatus OBJECT-TYPE
SYNTAX INTEGER
{
set (1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" While doing a write on the object(snmpset) the value
'set(1)' will associate the MKT with KeyId mentioned
in the index to the peer
'clear(2)' will clear/dissociate the keyId mentioned
in the index to the peer
During read/snmpget on the ogject the value
'set(1)' will indicate TCP-AO is enabled and the value
returned by fsbgp4TCPAOAuthKeyId is valid
Read on object will not display clear"
::= { fsbgp4TCPAOAuthPeerEntry 4 }
fsbgp4TCPAOAuthKeyStartAccept OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The date & time the router will start accepting packets that have
been created with the MKT specified by the key-id"
DEFVAL { "0000000000000000" }
::= { fsbgp4TCPAOAuthPeerEntry 5 }
fsbgp4TCPAOAuthKeyStartGenerate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date & time the router will start using the MKT specified
by the key-id for packets generation"
DEFVAL { "0000000000000000" }
::= { fsbgp4TCPAOAuthPeerEntry 6 }
fsbgp4TCPAOAuthKeyStopGenerate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The date & time the router will stop using the MKT specified by
the key-id for packets generation."
DEFVAL { "0000000000000000" }
::= { fsbgp4TCPAOAuthPeerEntry 7 }
fsbgp4TCPAOAuthKeyStopAccept OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The date & time the router will stop accepting packets that have
been created with the MKT specified by the key-id."
DEFVAL { "0000000000000000" }
::= { fsbgp4TCPAOAuthPeerEntry 8 }
-- ORF table
fsBgp4ORFListTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsBgp4ORFListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for adding/removing Ooutbound Route Filter entries received from the peer"
::= { fsbgp 44 }
fsBgp4ORFListEntry OBJECT-TYPE
SYNTAX FsBgp4ORFListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describing the bgp ORF list."
INDEX { fsBgp4ORFPeerAddrType,
fsBgp4ORFPeerAddr,
fsBgp4ORFAfi,
fsBgp4ORFSafi,
fsBgp4ORFType,
fsBgp4ORFSequence,
fsBgp4ORFAddrPrefix,
fsBgp4ORFAddrPrefixLen,
fsBgp4ORFMinLength,
fsBgp4ORFMaxLength,
fsBgp4ORFAction
}
::= { fsBgp4ORFListTable 1 }
FsBgp4ORFListEntry ::= SEQUENCE {
fsBgp4ORFPeerAddrType InetAddressType,
fsBgp4ORFPeerAddr InetAddress,
fsBgp4ORFAfi InetAddressType,
fsBgp4ORFSafi BgpSafi,
fsBgp4ORFType Unsigned32,
fsBgp4ORFSequence Unsigned32,
fsBgp4ORFAddrPrefix InetAddress,
fsBgp4ORFAddrPrefixLen Unsigned32,
fsBgp4ORFMinLength Unsigned32,
fsBgp4ORFMaxLength Unsigned32,
fsBgp4ORFAction INTEGER
}
fsBgp4ORFPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the address type of the BGP peer
asspciated with this ORF entry"
::= { fsBgp4ORFListEntry 1 }
fsBgp4ORFPeerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the remote address of the BGP peer associated
with this ORF entry"
::= { fsBgp4ORFListEntry 2 }
fsBgp4ORFAfi OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the type of IP address prefix in the ORF entry."
::= { fsBgp4ORFListEntry 3 }
fsBgp4ORFSafi OBJECT-TYPE
SYNTAX BgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the Sub-sequent address family of
IP address prefix in the ORF entry."
::= { fsBgp4ORFListEntry 4 }
fsBgp4ORFType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the type of the ORF entry.
Currently it supports only Address-Prefix based ORF type (64)"
::= { fsBgp4ORFListEntry 5 }
fsBgp4ORFSequence OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the sequential order in which a route should be
matched against an ORF entry."
::= { fsBgp4ORFListEntry 6 }
fsBgp4ORFAddrPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the IP address prefix for which the ORF rule was specified."
::= { fsBgp4ORFListEntry 7 }
fsBgp4ORFAddrPrefixLen OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the length of the IP address prefix length in bits which will be
considered when matching a route with the ORF entry."
::= { fsBgp4ORFListEntry 8 }
fsBgp4ORFMinLength OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the minimum prefix-length in bits for a IP address prefix.
Any route with prefix-length equal to or greater than this length will be
considered as a match, if fsBgp4ORFMaxLength is not specified.
If it is ZERO, it will be considered as unspecified and it will not be considered
while applying the rule. If both fsBgp4ORFMinLength and fsBgp4ORFMaxLength are specified,
then a route with prefix-length with in the range of fsBgp4ORFMinLength and
fsBgp4ORFMaxLength will be considered as a match"
::= { fsBgp4ORFListEntry 9 }
fsBgp4ORFMaxLength OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the maximum prefix-length in bits for a IP address prefix.
Any route with prefix-length equal to or less than this length will be
considered as a match, if fsBgp4ORFMinLength is not specified.
If it is ZERO, then it will be considered as unspecified and it will not be considered
while applying the rule. If both fsBgp4ORFMaxLength and fsBgp4ORFMinLength are specified,
then a route with prefix-length with in the range of fsBgp4ORFMinLength and
fsBgp4ORFMaxLength will be considered as a match"
::= { fsBgp4ORFListEntry 10 }
fsBgp4ORFAction OBJECT-TYPE
SYNTAX INTEGER {
permit (0),
deny (1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the action to be taken for a particular route
if it matches with the ORF rules defined in this particular ORF entry.
If it is PERMIT, then the matched route will be advertised to the peer.
Else if it is DENY, then the matched route will not be advertised to the peer"
::= { fsBgp4ORFListEntry 11 }
END
View Git Blame Copy Permalink