1268 lines
44 KiB
Plaintext
1268 lines
44 KiB
Plaintext
-- Copyright (C) 2016 Aricent. All Rights Reserved.
|
|
|
|
-- $Id: fsvlnext.mib,v 1.14 2016/02/28 10:54:47 siva Exp $
|
|
|
|
ARICENT-VLAN-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
OBJECT-TYPE, MODULE-IDENTITY, Integer32,
|
|
enterprises, Counter32 FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC
|
|
EnabledStatus FROM P-BRIDGE-MIB
|
|
VlanId FROM AricentMIVlan-MIB;
|
|
|
|
|
|
futureVlanExtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
|
|
CONTACT-INFO "support@aricent.com"
|
|
DESCRIPTION "||||||"
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION "||||||"
|
|
::= { enterprises futuresoftware(2076) 137}
|
|
|
|
|
|
TunnelStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To specify how to handle the L2 protocol packets received on a
|
|
particular port.
|
|
|
|
When the option is set to 'peer', the L2 protocol packets received
|
|
on a particular port will be processed in the Bridge.
|
|
|
|
When the option is set to 'tunnel', the L2 protocol packets received
|
|
on a particular port will be transparently transmitted in the provider
|
|
network and will not be processed in Bridges.
|
|
|
|
When the option is set to 'discard', the L2 protocol packets
|
|
received over a particular port will not be processed and discarded."
|
|
|
|
SYNTAX INTEGER { peer(1), tunnel(2), discard(3) }
|
|
|
|
L2CPProtocols ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the types of Layer 2 protocols. Identifiers from
|
|
1 to 13 specify the standard protocols - dot1x(1), lacp(2), stp(3), gvrp(4),
|
|
gmrp(5), igmp(6), mvrp(7), mmrp(8), elmi(9), lldp(10), ecfm(11), eoam(12),
|
|
ptp(13). The identifier 14 to 23 (denoted as other) specify other protocols."
|
|
|
|
SYNTAX INTEGER (1..23)
|
|
|
|
--fsVlanTunnelObjects - This sub group contains MIB objects for
|
|
-- configuring Tunneling feature in VLAN.
|
|
|
|
fsVlanSystemConfig OBJECT IDENTIFIER ::= { futureVlanExtMIB 1 }
|
|
fsVlanTunnelObjects OBJECT IDENTIFIER ::= { futureVlanExtMIB 2 }
|
|
fsVlanDiscardObjects OBJECT IDENTIFIER ::= { futureVlanExtMIB 3 }
|
|
|
|
-- SCALAR BEGIN
|
|
|
|
fsVlanBridgeMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
customerBridge (1),
|
|
providerBridge (2),
|
|
providerEdgeBridge (3),
|
|
providerCoreBridge (4),
|
|
providerBackboneICompBridge (5),
|
|
providerBackboneBCompBridge (6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This object indicates the Bridge mode of the switch.
|
|
|
|
Setting this to 'customerBridge' means that the switch will operate
|
|
as a 802.1Q VLAN Bridge.
|
|
|
|
Setting this to 'providerBridge' means that the Bridge will operate as
|
|
a normal Q-in-Q Bridge.
|
|
|
|
Setting this to 'providerCoreBridge' means that the switch will operate
|
|
as a 802.1ad compliant provider bridge with only S-VLAN component.
|
|
|
|
Setting this to 'providerEdgeBridge' means that the switch will operate
|
|
as a 802.1ad provider edge bridge with S-VLAN component and atleast
|
|
one C-VLAN component.
|
|
|
|
Setting this to 'providerBackboneICompBridge' means that the switch will operate
|
|
as a 802.1ah provider backbone bridge as an I component.
|
|
|
|
Setting this to 'providerBackboneBCompBridge' means that the switch will operate
|
|
as a 802.1ah provider backbone bridge as a B component.
|
|
|
|
For changing the bridge mode, GARP and STP modules should be shutdown."
|
|
|
|
::= { fsVlanSystemConfig 1 }
|
|
|
|
|
|
fsVlanTunnelBpduPri OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the default User Priority for all the tunneled Layer 2
|
|
BPDU's received on tunnel ports."
|
|
DEFVAL { 7 }
|
|
::= { fsVlanTunnelObjects 1 }
|
|
|
|
|
|
fsVlanTunnelStpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The MAC address to be used for Customer STP BPDUs tunneling.
|
|
|
|
When STP tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the customer BPDUs received.
|
|
This is the default behaviour in Provider (Q-in-Q) Bridges and customer
|
|
bridges. In case of 802.1ad bridges, this will be done only when the
|
|
outgoing port type is proprietary PNP.
|
|
|
|
Inside a given Network, BPDUs received with this MAC address will be
|
|
treated as data packets and not processed. This is the default
|
|
behavior in case of Provider (Q-in-Q) Bridges and customer bridges.
|
|
In case of 802.1ad Bridges, when the outgoing port type is not
|
|
proprietary PNP, the destination address will be replaced with the
|
|
reserved address defined for customer STP BPDU.Otherwise, they will
|
|
be treated as data packets.
|
|
|
|
When the BPDU is sent out of the given Network, this MAC address
|
|
will be replaced with the reserved address defined for Customer STP
|
|
BPDU. This is done only when STP protocol tunnel status is set to
|
|
Tunnel on the outgoing port, dropped otherwise."
|
|
|
|
::= { fsVlanTunnelObjects 2 }
|
|
|
|
fsVlanTunnelLacpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address to be used for LACP packets tunneling . When
|
|
LACP tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the LACP packets
|
|
received over this port.
|
|
|
|
LACP packets received with this MAC address will be treated as
|
|
data packets and not processed.
|
|
|
|
When the tunneled LACP packets are sent out of the given Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for LACP packets. This is done only when LACP protocol tunnel status
|
|
is set to Tunnel on the outgoing port, dropped otherwise."
|
|
|
|
::= { fsVlanTunnelObjects 3 }
|
|
|
|
fsVlanTunnelDot1xAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address to be used for Dot1x packets tunneling.
|
|
When Dot1x tunneling is enabled on a port, this MAC address will
|
|
be used as the the destination MAC address for the customer Dot1x
|
|
packets received with reserved address over this port.
|
|
|
|
Dot1x packets received with this MAC address will be treated as
|
|
data packets and not processed.
|
|
|
|
When the tunneled Dot1x packets are sent out of the given Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for Dot1x packets. This is done only when Dot1x protocol tunnel
|
|
status is set to Tunnel on the outgoing port ,dropped otherwise."
|
|
|
|
::= { fsVlanTunnelObjects 4 }
|
|
|
|
fsVlanTunnelGvrpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address to be used for GVRP PDUs tunneling.
|
|
|
|
When GVRP tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the customer GVRP PDUs
|
|
received. This is the default behavior in Provider (Q-in-Q) Bridges and
|
|
customer bridges. In case of 802.1ad bridges, this will be done only
|
|
when the outgoing port type is proprietary PNP.
|
|
|
|
Inside a given Network, packets received with this MAC address will be
|
|
treated as data packets and not processed. This is the default
|
|
behavior in case of Provider (Q-in-Q) Bridges and customer bridges.
|
|
In case of 802.1ad Bridges, when the outgoing port type is not
|
|
proprietary PNP, the destination address will be replaced with the
|
|
reserved address defined for customer GVRP PDUs.Otherwise, they
|
|
will be treated as data packets.
|
|
|
|
When the GVRP PDU is sent out of the given Network, this MAC address
|
|
will be replaced with the reserved address defined for Customer GVRP
|
|
PDU. This is done only when GVRP protocol tunnel status is set to
|
|
Tunnel on the outgoing port,dropped otherwise."
|
|
|
|
::= { fsVlanTunnelObjects 5 }
|
|
|
|
fsVlanTunnelGmrpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address to be used for GMRP PDUs tunneling.
|
|
When GMRP tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the customer GMRP PDUs
|
|
received over this port.
|
|
|
|
Inside a given Network, GMRP PDUs received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
|
|
When the tunneled GMRP PDUs are sent out of the given Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for GMRP PDUs. This is done only when GMRP protocol tunnel status is
|
|
set to Tunnel on the outgoing port,dropped otherwise."
|
|
|
|
::= { fsVlanTunnelObjects 6 }
|
|
|
|
fsVlanTunnelMvrpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The MAC address to be used for MVRP PDUs tunneling.
|
|
When MVRP tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the received MVRP PDUs.
|
|
|
|
Inside a given Network, packets received with this MAC address will be
|
|
treated as data packets and not processed. This is the default
|
|
behavior in case of Provider (Q-in-Q) Bridges and customer bridges.
|
|
In case of 802.1ad Bridges, when the outgoing port type is not
|
|
proprietary PNP, the destination address will be replaced with the
|
|
reserved address defined for customer MVRP PDUs. Otherwise, they
|
|
will be treated as data packets.
|
|
|
|
When the MVRP PDU is sent out of the given Network, this MAC address
|
|
will be replaced with the reserved address defined for Customer MVRP
|
|
PDU. This is done only when MVRP protocol tunnel status is set to
|
|
Tunnel on the outgoing port, dropped otherwise."
|
|
::= { fsVlanTunnelObjects 10 }
|
|
|
|
fsVlanTunnelMmrpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The MAC address to be used for MMRP PDUs tunneling.
|
|
When MMRP tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the MMRP PDUs received
|
|
over this port.
|
|
|
|
Inside a given Network, MMRP PDUs received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
|
|
When the tunneled MMRP PDUs are sent out of the given Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for MMRP PDUs. This is done only when MMRP protocol tunnel status is
|
|
set to Tunnel on the outgoing port,dropped otherwise."
|
|
|
|
::= { fsVlanTunnelObjects 11 }
|
|
|
|
fsVlanTunnelElmiAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address to be used for ELMI packets tunneling . When
|
|
ELMI tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the ELMI packets
|
|
received over this port. ELMI packets received with this MAC
|
|
address will be treated as data packets and not processed.
|
|
|
|
When the tunneled ELMI packets are sent out of the given Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for ELMI packets. This is done only when ELMI protocol tunnel status
|
|
is set to Tunnel on the outgoing port,dropped otherwise."
|
|
|
|
::= { fsVlanTunnelObjects 12 }
|
|
|
|
fsVlanTunnelLldpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address to be used for LLDP packets tunneling . When
|
|
LLDP tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the LLDP packets
|
|
received over this port.
|
|
|
|
LLDP packets received with this MAC address will be treated as
|
|
data packets and not processed.
|
|
|
|
When the tunneled LLDP packets are sent out of the given Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for LLDP packets. This is done only when LLDP protocol tunnel status
|
|
is set to Tunnel on the outgoing port, dropped otherwise."
|
|
|
|
::= { fsVlanTunnelObjects 13 }
|
|
|
|
fsVlanTransTunnelStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Transparent Tunnel of the system.
|
|
|
|
Setting this to 'enable' will allow the l2cp packets tunnel through the hardware
|
|
irrespective of the l2cp packet behaviour on the port.
|
|
|
|
Setting this to 'disable' will not allow the l2cp packets tunnel through the hardware
|
|
and will perform the actions defined on the ingress port for the l2 control packets."
|
|
|
|
DEFVAL { 2 }
|
|
::= { fsVlanTunnelObjects 14 }
|
|
|
|
fsVlanTunnelEcfmAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address to be used for ECFM packets tunneling. When
|
|
ECFM tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the ECFM packets
|
|
received over this port.
|
|
|
|
ECFM packets received with this MAC address will be treated as
|
|
data packets and not processed.
|
|
|
|
When the tunneled ECFM packets are sent out of the given Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for ECFM packets. This is done only when ECFM protocol tunnel status
|
|
is set to Tunnel on the outgoing port, dropped otherwise."
|
|
|
|
::= { fsVlanTunnelObjects 16 }
|
|
|
|
fsVlanTunnelEoamAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the MAC address to be used for EOAM packets
|
|
tunneling . When EOAM tunneling is enabled on the port, this MAC address
|
|
will be used as destination MAC address of the EOAM packets
|
|
received over the port.
|
|
|
|
EOAM packets received with this MAC address will be treated as
|
|
data packets and are not processed.
|
|
|
|
When the tunneled EOAM packets are sent out of the given Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for EOAM packets. This is done only when EOAM protocol tunnel status
|
|
is set to Tunnel on the outgoing port, else the packets are dropped."
|
|
|
|
::= { fsVlanTunnelObjects 17 }
|
|
|
|
fsVlanTunnelIgmpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the MAC address to be used for IGMP packets
|
|
tunneling . When IGMP tunneling is enabled on the port, this MAC address
|
|
will be used as destination MAC address of the IGMP packets
|
|
received over the port.
|
|
|
|
IGMP packets received with this MAC address will be treated as
|
|
data packets and are not processed.
|
|
|
|
When the tunneled IGMP packets are sent out of the given network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for the IGMP packets. This is done only when IGMP protocol tunnel status
|
|
is set to Tunnel on the outgoing port, else the packets are dropped."
|
|
|
|
::= { fsVlanTunnelObjects 18 }
|
|
|
|
-- SCALAR END
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- Vlan Tunnel Table
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
fsVlanTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsVlanTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about the tunnel ports. A walk on
|
|
this table will show only those interfaces that are configured for
|
|
tunneling.
|
|
This table is supported only when the Bridge is configured in Provider
|
|
Bridge (Q-in-Q) mode."
|
|
|
|
::= { fsVlanTunnelObjects 7 }
|
|
|
|
fsVlanTunnelEntry OBJECT-TYPE
|
|
SYNTAX FsVlanTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry indicating the tunnel information of the port."
|
|
INDEX { fsVlanPort }
|
|
::= { fsVlanTunnelTable 1 }
|
|
|
|
FsVlanTunnelEntry ::=
|
|
SEQUENCE {
|
|
fsVlanPort Integer32,
|
|
fsVlanTunnelStatus EnabledStatus
|
|
}
|
|
|
|
fsVlanPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Index value of the port in the system for which this entry
|
|
applies. The maximum index value of the port is defined by the
|
|
system."
|
|
::= { fsVlanTunnelEntry 1 }
|
|
|
|
|
|
fsVlanTunnelStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Tunneling is enabled or disabled on this port.
|
|
fsVlanTunnelStatus can be set to 'enabled' if and only if the
|
|
Bridge mode is set to be `Provider Bridge Mode` and VLAN port
|
|
type is set to 'accessPort'. Tunneling can be enabled only on ports
|
|
which are in 'dot1x force-authorised' state."
|
|
DEFVAL { disabled }
|
|
::= { fsVlanTunnelEntry 2 }
|
|
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- Tunnel protocol configuration table
|
|
-- ----------------------------------------------------------------
|
|
fsVlanTunnelProtocolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsVlanTunnelProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about the handling (Tunnel/Peer/
|
|
Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/
|
|
IGMP/MVRP and MMRP) inside a given network."
|
|
|
|
::= { fsVlanTunnelObjects 8 }
|
|
|
|
fsVlanTunnelProtocolEntry OBJECT-TYPE
|
|
SYNTAX FsVlanTunnelProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
|
|
protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port.
|
|
|
|
Tunnel Status cannot be set to 'tunnel/discard', if the protocol
|
|
is enabled on the port.Exception, Igmp and dot1x should be disabled
|
|
globally for setting the tunnel status to 'tunnel/discard'."
|
|
INDEX { fsVlanPort }
|
|
::= { fsVlanTunnelProtocolTable 1 }
|
|
|
|
FsVlanTunnelProtocolEntry ::=
|
|
SEQUENCE {
|
|
fsVlanTunnelProtocolDot1x TunnelStatus,
|
|
fsVlanTunnelProtocolLacp TunnelStatus,
|
|
fsVlanTunnelProtocolStp TunnelStatus,
|
|
fsVlanTunnelProtocolGvrp TunnelStatus,
|
|
fsVlanTunnelProtocolGmrp TunnelStatus,
|
|
fsVlanTunnelProtocolIgmp TunnelStatus,
|
|
fsVlanTunnelProtocolMvrp TunnelStatus,
|
|
fsVlanTunnelProtocolMmrp TunnelStatus,
|
|
fsVlanTunnelProtocolElmi TunnelStatus,
|
|
fsVlanTunnelProtocolLldp TunnelStatus,
|
|
fsVlanTunnelProtocolEcfm TunnelStatus,
|
|
fsVlanTunnelOverrideOption EnabledStatus,
|
|
fsVlanTunnelProtocolEoam TunnelStatus
|
|
}
|
|
|
|
fsVlanTunnelProtocolDot1x OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the Dot1x packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 1 }
|
|
|
|
fsVlanTunnelProtocolLacp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the LACP packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 2 }
|
|
|
|
fsVlanTunnelProtocolStp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the STP packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 3 }
|
|
|
|
fsVlanTunnelProtocolGvrp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the GVRP packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 4 }
|
|
|
|
fsVlanTunnelProtocolGmrp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the GMRP packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 5 }
|
|
|
|
fsVlanTunnelProtocolIgmp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the IGMP packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 6 }
|
|
|
|
fsVlanTunnelProtocolMvrp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the MVRP packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 7 }
|
|
|
|
fsVlanTunnelProtocolMmrp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the MMRP packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 8 }
|
|
|
|
fsVlanTunnelProtocolElmi OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the ELMI packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 9 }
|
|
|
|
fsVlanTunnelProtocolLldp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the LLDP packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 10 }
|
|
|
|
fsVlanTunnelProtocolEcfm OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the ECFM packets
|
|
received on this port."
|
|
::= { fsVlanTunnelProtocolEntry 11 }
|
|
|
|
fsVlanTunnelOverrideOption OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether Override option is enabled or disabled on
|
|
the Port.
|
|
If this option is set to enable, Tunnel status for all the Layer 2 control
|
|
protocol will be referred from port Table.
|
|
If this option is set to disable, Tunnel status for Layer 2 control
|
|
protocols which operates over a vlan will be referred from VLAN Table."
|
|
|
|
DEFVAL { disabled }
|
|
::= { fsVlanTunnelProtocolEntry 12 }
|
|
|
|
fsVlanTunnelProtocolEoam OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies whether to peer or tunnel or discard the EOAM packets
|
|
received on the port."
|
|
::= { fsVlanTunnelProtocolEntry 13 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- Tunnel protocol statistics table
|
|
-- ----------------------------------------------------------------
|
|
fsVlanTunnelProtocolStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsVlanTunnelProtocolStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains statistics information about the tunneled
|
|
Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP)
|
|
received and transmitted over a port."
|
|
::= { fsVlanTunnelObjects 9 }
|
|
|
|
fsVlanTunnelProtocolStatsEntry OBJECT-TYPE
|
|
SYNTAX FsVlanTunnelProtocolStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
|
|
protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port."
|
|
|
|
INDEX { fsVlanPort }
|
|
::= { fsVlanTunnelProtocolStatsTable 1 }
|
|
|
|
FsVlanTunnelProtocolStatsEntry ::=
|
|
SEQUENCE {
|
|
fsVlanTunnelProtocolDot1xPktsRecvd Counter32,
|
|
fsVlanTunnelProtocolDot1xPktsSent Counter32,
|
|
fsVlanTunnelProtocolLacpPktsRecvd Counter32,
|
|
fsVlanTunnelProtocolLacpPktsSent Counter32,
|
|
fsVlanTunnelProtocolStpPDUsRecvd Counter32,
|
|
fsVlanTunnelProtocolStpPDUsSent Counter32,
|
|
fsVlanTunnelProtocolGvrpPDUsRecvd Counter32,
|
|
fsVlanTunnelProtocolGvrpPDUsSent Counter32,
|
|
fsVlanTunnelProtocolGmrpPktsRecvd Counter32,
|
|
fsVlanTunnelProtocolGmrpPktsSent Counter32,
|
|
fsVlanTunnelProtocolIgmpPktsRecvd Counter32,
|
|
fsVlanTunnelProtocolIgmpPktsSent Counter32,
|
|
fsVlanTunnelProtocolMvrpPktsRecvd Counter32,
|
|
fsVlanTunnelProtocolMvrpPktsSent Counter32,
|
|
fsVlanTunnelProtocolMmrpPktsRecvd Counter32,
|
|
fsVlanTunnelProtocolMmrpPktsSent Counter32,
|
|
fsVlanTunnelProtocolElmiPktsRecvd Counter32,
|
|
fsVlanTunnelProtocolElmiPktsSent Counter32,
|
|
fsVlanTunnelProtocolLldpPktsRecvd Counter32,
|
|
fsVlanTunnelProtocolLldpPktsSent Counter32,
|
|
fsVlanTunnelProtocolEcfmPktsRecvd Counter32,
|
|
fsVlanTunnelProtocolEcfmPktsSent Counter32,
|
|
fsVlanTunnelProtocolEoamPktsRecvd Counter32,
|
|
fsVlanTunnelProtocolEoamPktsSent Counter32
|
|
|
|
}
|
|
|
|
fsVlanTunnelProtocolDot1xPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled Dot1x Packets received."
|
|
::= { fsVlanTunnelProtocolStatsEntry 1 }
|
|
|
|
fsVlanTunnelProtocolDot1xPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled Dot1x Packets transmitted."
|
|
::= { fsVlanTunnelProtocolStatsEntry 2 }
|
|
|
|
fsVlanTunnelProtocolLacpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled LACP Packets received."
|
|
::= { fsVlanTunnelProtocolStatsEntry 3 }
|
|
|
|
fsVlanTunnelProtocolLacpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled LACP packets transmitted."
|
|
::= { fsVlanTunnelProtocolStatsEntry 4 }
|
|
|
|
fsVlanTunnelProtocolStpPDUsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled STP PDUs received."
|
|
::= { fsVlanTunnelProtocolStatsEntry 5 }
|
|
|
|
fsVlanTunnelProtocolStpPDUsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled STP PDUs transmitted."
|
|
::= { fsVlanTunnelProtocolStatsEntry 6 }
|
|
|
|
fsVlanTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled GVRP PDUs received."
|
|
::= { fsVlanTunnelProtocolStatsEntry 7 }
|
|
|
|
fsVlanTunnelProtocolGvrpPDUsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled GVRP PDUs transmitted."
|
|
::= { fsVlanTunnelProtocolStatsEntry 8 }
|
|
|
|
fsVlanTunnelProtocolGmrpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled GMRP PDUs packets received."
|
|
::= { fsVlanTunnelProtocolStatsEntry 9 }
|
|
|
|
fsVlanTunnelProtocolGmrpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled GMRP packets transmitted."
|
|
::= { fsVlanTunnelProtocolStatsEntry 10 }
|
|
|
|
fsVlanTunnelProtocolIgmpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled IGMP packets received."
|
|
::= { fsVlanTunnelProtocolStatsEntry 11 }
|
|
|
|
fsVlanTunnelProtocolIgmpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunneled IGMP packets transmitted."
|
|
::= { fsVlanTunnelProtocolStatsEntry 12 }
|
|
|
|
fsVlanTunnelProtocolMvrpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MVRPDUs received on a port for which the MVRP tunneling
|
|
status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 13 }
|
|
|
|
fsVlanTunnelProtocolMvrpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MVRPDUs transmitted on a port on which the MVRP tunneling
|
|
status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 14 }
|
|
|
|
fsVlanTunnelProtocolMmrpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MMRPDUs received on a port for which the MMRP tunneling
|
|
status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 15 }
|
|
|
|
fsVlanTunnelProtocolMmrpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MMRPDUs transmitted on a port on which the MMRP tunneling
|
|
status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 16 }
|
|
|
|
fsVlanTunnelProtocolElmiPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ELMI packets received on a port for which the ELMI tunneling
|
|
status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 17 }
|
|
|
|
fsVlanTunnelProtocolElmiPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ELMI packets transmitted on a port on which the ELMI
|
|
tunneling status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 18 }
|
|
|
|
fsVlanTunnelProtocolLldpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDPUDs received on a port for which the LLDP tunneling
|
|
status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 19 }
|
|
|
|
fsVlanTunnelProtocolLldpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDPUDs transmitted on a port on which the LLDP tunneling
|
|
status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 20 }
|
|
|
|
fsVlanTunnelProtocolEcfmPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ECFM packets received on a port for which the ECFM
|
|
tunneling status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 21 }
|
|
|
|
fsVlanTunnelProtocolEcfmPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ECFM packets transmitted on a port on which the ECFM
|
|
tunneling status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 22 }
|
|
|
|
fsVlanTunnelProtocolEoamPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the number of EOAM packets received on a port
|
|
on which the EOAM tunneling status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 23 }
|
|
|
|
fsVlanTunnelProtocolEoamPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the number of EOAM packets transmitted on a port
|
|
for which the EOAM tunneling status is enabled."
|
|
::= { fsVlanTunnelProtocolStatsEntry 24 }
|
|
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- VLAN Discard statistics table
|
|
-- ----------------------------------------------------------------
|
|
fsVlanDiscardStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsVlanDiscardStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains statistics information about the L2 protocol
|
|
packets (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) discarded on
|
|
reception and transmission side due to 'Discard' tunnel protocol
|
|
status."
|
|
|
|
::= { fsVlanDiscardObjects 1 }
|
|
|
|
fsVlanDiscardStatsEntry OBJECT-TYPE
|
|
SYNTAX FsVlanDiscardStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry indicating the Discard statistics for L2 protocol packets."
|
|
|
|
INDEX { fsVlanPort }
|
|
::= { fsVlanDiscardStatsTable 1 }
|
|
|
|
FsVlanDiscardStatsEntry ::=
|
|
SEQUENCE {
|
|
fsVlanDiscardDot1xPktsRx Counter32,
|
|
fsVlanDiscardDot1xPktsTx Counter32,
|
|
fsVlanDiscardLacpPktsRx Counter32,
|
|
fsVlanDiscardLacpPktsTx Counter32,
|
|
fsVlanDiscardStpPDUsRx Counter32,
|
|
fsVlanDiscardStpPDUsTx Counter32,
|
|
fsVlanDiscardGvrpPktsRx Counter32,
|
|
fsVlanDiscardGvrpPktsTx Counter32,
|
|
fsVlanDiscardGmrpPktsRx Counter32,
|
|
fsVlanDiscardGmrpPktsTx Counter32,
|
|
fsVlanDiscardIgmpPktsRx Counter32,
|
|
fsVlanDiscardIgmpPktsTx Counter32,
|
|
fsVlanDiscardMvrpPktsRx Counter32,
|
|
fsVlanDiscardMvrpPktsTx Counter32,
|
|
fsVlanDiscardMmrpPktsRx Counter32,
|
|
fsVlanDiscardMmrpPktsTx Counter32,
|
|
fsVlanDiscardElmiPktsRx Counter32,
|
|
fsVlanDiscardElmiPktsTx Counter32,
|
|
fsVlanDiscardLldpPktsRx Counter32,
|
|
fsVlanDiscardLldpPktsTx Counter32,
|
|
fsVlanDiscardEcfmPktsRx Counter32,
|
|
fsVlanDiscardEcfmPktsTx Counter32,
|
|
fsVlanDiscardEoamPktsRx Counter32,
|
|
fsVlanDiscardEoamPktsTx Counter32
|
|
}
|
|
|
|
fsVlanDiscardDot1xPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Dot1x packets discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 1 }
|
|
|
|
fsVlanDiscardDot1xPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Dot1x packets discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 2 }
|
|
|
|
fsVlanDiscardLacpPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LACP packets discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 3 }
|
|
|
|
fsVlanDiscardLacpPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LACP packets discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 4 }
|
|
|
|
fsVlanDiscardStpPDUsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of STP BPDUs discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 5 }
|
|
|
|
fsVlanDiscardStpPDUsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of STP BPDUs discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 6 }
|
|
|
|
fsVlanDiscardGvrpPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of GVRP packets discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 7 }
|
|
|
|
fsVlanDiscardGvrpPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of GVRP packets discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 8 }
|
|
|
|
fsVlanDiscardGmrpPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of GMRP packets discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 9 }
|
|
|
|
fsVlanDiscardGmrpPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of GMRP packets discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 10 }
|
|
|
|
fsVlanDiscardIgmpPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMP packets discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 11 }
|
|
|
|
fsVlanDiscardIgmpPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IGMP packets discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 12 }
|
|
|
|
fsVlanDiscardMvrpPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MVRP packets discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 13 }
|
|
|
|
fsVlanDiscardMvrpPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MVRP packets discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 14 }
|
|
|
|
fsVlanDiscardMmrpPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MMRP packets discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 15 }
|
|
|
|
fsVlanDiscardMmrpPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MMRP packets discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 16 }
|
|
|
|
fsVlanDiscardElmiPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ELMI packets discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 17 }
|
|
|
|
fsVlanDiscardElmiPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ELMI packets discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 18 }
|
|
|
|
fsVlanDiscardLldpPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP packets discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 19 }
|
|
|
|
fsVlanDiscardLldpPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP packets discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 20 }
|
|
|
|
fsVlanDiscardEcfmPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ECFM packets discarded on the reception side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 21 }
|
|
|
|
fsVlanDiscardEcfmPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ECFM packets discarded on the transmission side
|
|
due to Discard option."
|
|
::= { fsVlanDiscardStatsEntry 22 }
|
|
|
|
fsVlanDiscardEoamPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the number of EOAM packets discarded on
|
|
the reception side when the tunnel protocol status is
|
|
set as Discard."
|
|
::= { fsVlanDiscardStatsEntry 23 }
|
|
|
|
fsVlanDiscardEoamPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object displays the number of EOAM packets discarded on
|
|
the transmission side when the tunnel protocol status is
|
|
set as Discard."
|
|
::= { fsVlanDiscardStatsEntry 24 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- Service Based Tunnel Protocol Configuration table
|
|
-- ----------------------------------------------------------------
|
|
fsServiceVlanTunnelProtocolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsServiceVlanTunnelProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about the handling (Tunnel/Peer/
|
|
Discard)of customer Layer 2 protocols (GVRP/GMRP/IGMP/MVRP/MMRP/ECFM)
|
|
with service based inside service provider network."
|
|
|
|
::= { fsVlanTunnelObjects 15 }
|
|
|
|
fsServiceVlanTunnelProtocolEntry OBJECT-TYPE
|
|
SYNTAX FsServiceVlanTunnelProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry indicates the handling (Tunnel/Peer/Discard) of Layer 2
|
|
protocols (GVRP/GMRP/IGMP/MVRP/MMRP/ECFM) on the VLAN.
|
|
|
|
Tunnel Status cannot be set to 'tunnel/discard', if the protocol
|
|
is enabled globally. Example, for IGMP, igmp should be disabled
|
|
globally for setting the tunnel status to 'tunnel/discard'."
|
|
|
|
INDEX { fsServiceVlanId, fsServiceProtocolEnum }
|
|
::= { fsServiceVlanTunnelProtocolTable 1 }
|
|
|
|
FsServiceVlanTunnelProtocolEntry ::=
|
|
SEQUENCE {
|
|
fsServiceVlanId VlanId,
|
|
fsServiceProtocolEnum L2CPProtocols,
|
|
fsServiceVlanRsvdMacaddress MacAddress,
|
|
fsServiceVlanTunnelMacaddress MacAddress,
|
|
fsServiceVlanTunnelProtocolStatus TunnelStatus,
|
|
fsServiceVlanTunnelPktsRecvd Counter32,
|
|
fsServiceVlanTunnelPktsSent Counter32,
|
|
fsServiceVlanDiscardPktsRx Counter32,
|
|
fsServiceVlanDiscardPktsTx Counter32
|
|
}
|
|
|
|
fsServiceVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the service vlan identifier which is allocated
|
|
for the customer at provider domain."
|
|
::= { fsServiceVlanTunnelProtocolEntry 1 }
|
|
|
|
fsServiceProtocolEnum OBJECT-TYPE
|
|
SYNTAX L2CPProtocols
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the protocols which are received on the service."
|
|
::= { fsServiceVlanTunnelProtocolEntry 2 }
|
|
|
|
fsServiceVlanRsvdMacaddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the reserved MAC address for the protocol and
|
|
it is applicable only when the value of the field fsServiceProtocolEnum
|
|
is 'other'."
|
|
::= { fsServiceVlanTunnelProtocolEntry 3 }
|
|
|
|
fsServiceVlanTunnelMacaddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Tunnel MAC address for the protocol and it is
|
|
applicable only when the value of the field fsServiceProtocolEnum is
|
|
`other`."
|
|
::= { fsServiceVlanTunnelProtocolEntry 4 }
|
|
|
|
fsServiceVlanTunnelProtocolStatus OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status (peer/tunnel/discard) of L2 packets
|
|
received on the VLAN."
|
|
::= { fsServiceVlanTunnelProtocolEntry 5 }
|
|
|
|
fsServiceVlanTunnelPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled Packets received."
|
|
::= { fsServiceVlanTunnelProtocolEntry 6 }
|
|
|
|
fsServiceVlanTunnelPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled Packets transmitted."
|
|
::= { fsServiceVlanTunnelProtocolEntry 7 }
|
|
|
|
fsServiceVlanDiscardPktsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of packets discarded on the reception
|
|
side due to discard option."
|
|
::= { fsServiceVlanTunnelProtocolEntry 8 }
|
|
|
|
fsServiceVlanDiscardPktsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of packets discarded on the transmission
|
|
side due to discard option."
|
|
::= { fsServiceVlanTunnelProtocolEntry 9 }
|
|
|
|
END
|