Observium_CE/mibs/ruijie/MY-MULTICAST-MIB

868 lines
26 KiB
Plaintext

-- *****************************************************************
-- MY-MULTICAST-MIB.mib: My Multicast MIB file
--
-- $Copyright$
--
-- *****************************************************************
MY-MULTICAST-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, experimental, Counter32, Gauge32,
Integer32, IpAddress, TimeTicks FROM SNMPv2-SMI
RowStatus, DisplayString,TruthValue FROM SNMPv2-TC
myMgmt FROM MY-SMI
InterfaceIndex FROM IF-MIB
VlanId
FROM Q-BRIDGE-MIB
IfIndex
FROM MY-TC
IANAipRouteProtocol,IANAipMRouteProtocol FROM IANA-RTPROTO-MIB
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;
myMultMIB MODULE-IDENTITY
LAST-UPDATED "200301200000Z"
ORGANIZATION "$Company$"
CONTACT-INFO
"
Tel: $Telephone$
E-mail: $E-mail$"
DESCRIPTION
"This module defines my multicast mibs."
REVISION "200301200000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { myMgmt 28}
myMultMIBObjects OBJECT IDENTIFIER ::= { myMultMIB 1 }
myIpMRouteInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MyIpMRouteInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing multicast routing
information specific to interfaces."
::= { myMultMIBObjects 1 }
myIpMRouteInterfaceEntry OBJECT-TYPE
SYNTAX MyIpMRouteInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information for a particular interface."
INDEX { myIpMRouteInterfaceIfIndex }
::= { myIpMRouteInterfaceTable 1 }
MyIpMRouteInterfaceEntry ::= SEQUENCE {
myIpMRouteInterfaceIfIndex InterfaceIndex,
myIpMRouteInterfaceTtl Integer32,
myIpMRouteInterfaceProtocol IANAipMRouteProtocol,
myIpMRouteInterfaceRateLimit Integer32,
myIpMRouteInterfaceInMcastOctets Counter32,
myIpMRouteInterfaceOutMcastOctets Counter32,
myIpMRouteInterfaceHCInMcastOctets Counter64,
myIpMRouteInterfaceHCOutMcastOctets Counter64,
myIpMRouteBoundaryAclName DisplayString
}
myIpMRouteInterfaceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for which this entry
contains information."
::= { myIpMRouteInterfaceEntry 1 }
myIpMRouteInterfaceTtl OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The datagram TTL threshold for the interface. Any IP
multicast datagrams with a TTL less than this threshold will
not be forwarded out the interface. The default value of 0
means all multicast packets are forwarded out the
interface."
DEFVAL { 0 }
::= { myIpMRouteInterfaceEntry 2 }
myIpMRouteInterfaceProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing protocol running on this interface."
::= { myIpMRouteInterfaceEntry 3 }
myIpMRouteInterfaceRateLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate-limit, in kilobits per second, of forwarded
multicast traffic on the interface. A rate-limit of 0
indicates that no rate limiting is done."
DEFVAL { 0 }
::= { myIpMRouteInterfaceEntry 4 }
myIpMRouteInterfaceInMcastOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is similar to ifInOctets in the Interfaces MIB, except that
only multicast packets are counted."
::= { myIpMRouteInterfaceEntry 5 }
myIpMRouteInterfaceOutMcastOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have been
sent on the interface."
::= { myIpMRouteInterfaceEntry 6 }
myIpMRouteInterfaceHCInMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is a 64-bit version of ipMRouteInterfaceInMcastOctets. It
is similar to ifHCInOctets in the Interfaces MIB, except
that only multicast packets are counted."
::= { myIpMRouteInterfaceEntry 7 }
myIpMRouteInterfaceHCOutMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have been
sent on the interface. This object is a 64-bit version of
ipMRouteInterfaceOutMcastOctets."
::= { myIpMRouteInterfaceEntry 8 }
myIpMRouteBoundaryAclName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of an access list."
::= { myIpMRouteInterfaceEntry 9 }
myIpRpfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MyIpRpfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's scoped
multicast address boundaries."
::= { myMultMIBObjects 2 }
myIpRpfEntry OBJECT-TYPE
SYNTAX MyIpRpfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the starIpRpfTable
representing a scoped boundary."
INDEX { myIpRpfSourceAddress}
::= { myIpRpfTable 1 }
MyIpRpfEntry ::= SEQUENCE {
myIpRpfSourceAddress IpAddress,
myIpRpfInterface InterfaceIndex,
myIpRpfNeighborAddress IpAddress,
myIpRpfRouteAddress IpAddress,
myIpRpfRouteMask IpAddress,
myIpRpfType Integer32
}
myIpRpfSourceAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"source address that this information concerns."
::= { myIpRpfEntry 1 }
myIpRpfInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For the given source, interface from which the
router expects to get packets."
::= { myIpRpfEntry 2 }
myIpRpfNeighborAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For given source, neighbor from which the router expects to get
packets."
::= { myIpRpfEntry 3 }
myIpRpfRouteAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Route address and mask that matched against this source."
::= { myIpRpfEntry 4 }
myIpRpfRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Route address and mask that matched against this source."
::= { myIpRpfEntry 5 }
myIpRpfType OBJECT-TYPE
SYNTAX Integer32{unicast(1),dvmrp(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Routing table from which this route was obtained, either unicast,
or DVMRP mroutes."
::= { myIpRpfEntry 6 }
myMPingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MyMPingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"generate multicast traffic in the lab to test the multicast
tree since it pings all members of the group, and all members
respond."
::= { myMultMIBObjects 3 }
myMPingEntry OBJECT-TYPE
SYNTAX MyMPingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the starMPingTable."
INDEX { myMPingIndex ,myMPingGroupAddress ,myMPingGroupMember}
::= { myMPingTable 1 }
MyMPingEntry ::= SEQUENCE {
myMPingIndex Integer32,
myMPingGroupAddress IpAddress,
myMPingGroupMember IpAddress,
myMPingResponseTime TimeTicks,
myMPingDataLength Unsigned32,
myMPingTimeOuts Unsigned32,
myMPingCompleted TruthValue,
myMPingEntryStauts RowStatus
}
myMPingIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Object which specifies a unique entry in the
myPingTable. A management station wishing
to initiate a ping operation should use a
pseudo-random value for this object when creating
or modifying an instance of a myPingEntry.
The RowStatus semantics of the myPingEntryStatus
object will prevent access conflicts."
::= { myMPingEntry 1 }
myMPingGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of group."
::= { myMPingEntry 2 }
myMPingGroupMember OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of Member."
::= { myMPingEntry 3 }
myMPingResponseTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The response time of member."
::= { myMPingEntry 4 }
myMPingDataLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Pinged ICMP echo datagram's data length."
DEFVAL { 1500 }
::= { myMPingEntry 5 }
myMPingTimeOuts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ping but no echo from required address, the time last
for time out, in milliseconds."
DEFVAL { 1000 }
::= { myMPingEntry 6 }
myMPingCompleted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"While the ping process has completed the value of this field
will be true(1), else false(2)."
::= { myMPingEntry 7 }
myMPingEntryStauts OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"entry status for this list."
::= { myMPingEntry 8 }
myIpMRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF MyIpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing multicast routing
information for IP datagrams sent by particular sources to
the IP multicast groups known to this router."
::= { myMultMIBObjects 4 }
myIpMRouteEntry OBJECT-TYPE
SYNTAX MyIpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information for IP datagrams from a particular source and
addressed to a particular IP multicast group address.
Discontinuities in counters in this entry can be detected by
observing the value of ipMRouteUpTime."
INDEX { myIpMRouteGroup,
myIpMRouteSource,
myIpMRouteSourceMask}
::= { myIpMRouteTable 1 }
MyIpMRouteEntry ::= SEQUENCE {
myIpMRouteGroup IpAddress,
myIpMRouteSource IpAddress,
myIpMRouteSourceMask IpAddress,
myIpMRouteRP IpAddress,
myIpMRoutePruneFlag TruthValue,
myIpMRouteSparseFlag TruthValue,
myIpMRouteConnectedFlag TruthValue,
myIpMRouteLocalFlag TruthValue,
myIpMRouteRegisterFlag TruthValue,
myIpMRouteRpFlag TruthValue,
myIpMRouteSptFlag TruthValue,
myIpMRouteInLimit Integer32,
myIpMRouteLifeAvg Integer32,
myIpMrouteGroupPktsCount Integer32,
myIpMrouteSouceCount Integer32,
myIpMrouteRpPkts Integer32,
myIpMrouteRpPktsPerSec Integer32,
myIpMrouteRpAvgPktsSize Integer32,
myIpMrouteRpKilobitsPerSec Integer32,
myIpMrouteSoucePkts Integer32,
myIpMrouteSoucePktsPerSec Integer32,
myIpMrouteSouceAvgPktsSize Integer32,
myIpMrouteSouceKilobitsPerSec Integer32
}
myIpMRouteGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of group."
::= { myIpMRouteEntry 1 }
myIpMRouteSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of Souce."
::= { myIpMRouteEntry 2 }
myIpMRouteSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Mask of Souce address."
::= { myIpMRouteEntry 3 }
myIpMRouteRP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of RP Route."
::= { myIpMRouteEntry 4 }
myIpMRoutePruneFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean, indicates whether this route is pruned. A pruned
route is one that has an empty outgoing interface list or
all interfaces are in Pruned state. A multicast packet
that matches a pruned route doesn't get forwarded."
::= { myIpMRouteEntry 5 }
myIpMRouteSparseFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean, indicating PIM multicast routing protocol
sparse-mode (versus dense-mode). In sparse-mode, packets
are forwarded only out interfaces that have been joined.
In dense-mode, they are forwarded out all interfaces that
have not been pruned."
::= { myIpMRouteEntry 6 }
myIpMRouteConnectedFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean, indicating whether there is a directly connected
member for a group attached to the router."
::= { myIpMRouteEntry 7 }
myIpMRouteLocalFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean, indicating whether local system is a member of a
group on any interface."
::= { myIpMRouteEntry 8 }
myIpMRouteRegisterFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean, indicates whether to send registers for the
entry. A first hop router directly connected to a
multicast source host, as well as a border router on the
boundary of two domains running different multicast
routing protocols, encapsulates packets to be sent on the
shared tree. This is done until the RP sends Joins back to
this router."
::= { myIpMRouteEntry 9 }
myIpMRouteRpFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean, indicating whether there is a Prune state for
this source along the shared tree."
::= { myIpMRouteEntry 10 }
myIpMRouteSptFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean, indicating whether data is being received on the
SPT tree, ie the Shortest Path Tree."
::= { myIpMRouteEntry 11 }
myIpMRouteInLimit OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "Kbits/second"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Incoming interface's limit for rate limiting data
traffic, in Kbps. "
::= { myIpMRouteEntry 12 }
myIpMRouteLifeAvg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of data traffic."
::= { myIpMRouteEntry 13 }
myIpMrouteGroupPktsCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of group packets."
::= { myIpMRouteEntry 14 }
myIpMrouteSouceCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of souce."
::= { myIpMRouteEntry 15 }
myIpMrouteRpPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packets count of Rp-Tree ."
::= { myIpMRouteEntry 16 }
myIpMrouteRpPktsPerSec OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packets count which Rp-Tree send in one second."
::= { myIpMRouteEntry 17 }
myIpMrouteRpAvgPktsSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average packets size which Rp-Tree send ."
::= { myIpMRouteEntry 18 }
myIpMrouteRpKilobitsPerSec OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Kilobits of Rp-Tree send in one second ."
::= { myIpMRouteEntry 19 }
myIpMrouteSoucePkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packets count of souce ."
::= { myIpMRouteEntry 20 }
myIpMrouteSoucePktsPerSec OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packets count which souce send in one second."
::= { myIpMRouteEntry 21 }
myIpMrouteSouceAvgPktsSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average packets size which souce send ."
::= { myIpMRouteEntry 22 }
myIpMrouteSouceKilobitsPerSec OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Kilobits of Souce send in one second ."
::= { myIpMRouteEntry 23 }
--
--mrinfo table
--
myMrinfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF MyMrinfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing multicast routing
information for PIM neighbor."
::= { myMultMIBObjects 5 }
myMrinfoEntry OBJECT-TYPE
SYNTAX MyMrinfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) of starMrinfoTable."
INDEX { myMrinfoIfAddress}
::= { myMrinfoTable 1 }
MyMrinfoEntry ::= SEQUENCE {
myMrinfoIfAddress IpAddress,
myMrinfoNeighbor IpAddress,
myMrinfoTtlThreshold Integer32,
myMrinfoMetricOffset Integer32,
myMrinfoQuerier TruthValue,
myMrinfoDown TruthValue,
myMrinfoLeaf TruthValue
}
myMrinfoIfAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of Interface Router to request."
::= { myMrinfoEntry 1 }
myMrinfoNeighbor OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of Interface neighbor,if there is no neigbor then
return 0.0.0.0."
::= { myMrinfoEntry 2 }
myMrinfoTtlThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The datagram TTL threshold for the interface. Any IP
multicast datagrams with a TTL less than this threshold will
not be forwarded out the interface. The default value of 0
means all multicast packets are forwarded out the
interface."
::= { myMrinfoEntry 3 }
myMrinfoMetricOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value added to the metric of a DVMRP route advertised in
a report message."
::= { myMrinfoEntry 4 }
myMrinfoQuerier OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this interface is querier then the value of this field
will be true(1), else false(2)."
::= { myMrinfoEntry 5 }
myMrinfoDown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this interface is down then the value of this field
will be true(1), else false(2)."
::= { myMrinfoEntry 6 }
myMrinfoLeaf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If locoal switch is leaf switch then the value of this field
will be true(1), else false(2)."
::= { myMrinfoEntry 7 }
--
--multicast vlan id Table
--
myMultVidTable OBJECT-TYPE
SYNTAX SEQUENCE OF MyMultVidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing multicast routing
vlan id for interface."
::= { myMultMIBObjects 6 }
myMultVidEntry OBJECT-TYPE
SYNTAX MyMultVidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) of myMultVidTable."
INDEX { myMultInterfaceIfIndex }
::= { myMultVidTable 1 }
MyMultVidEntry ::= SEQUENCE {
myMultInterfaceIfIndex IfIndex,
myMultVlan VlanId
}
myMultInterfaceIfIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { myMultVidEntry 1 }
myMultVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value indicate the VID of the vlan which that this port
belong to. This field is effective for only trunk port.The
default value indicate the VID of the native vlan of that
this port."
::= { myMultVidEntry 2 }
-- units of conformance
myMultMIBConformance OBJECT IDENTIFIER ::= { myMultMIB 2 }
myMultMIBCompliances OBJECT IDENTIFIER ::= { myMultMIBConformance 1 }
myMultMIBGroups OBJECT IDENTIFIER ::= { myMultMIBConformance 2 }
-- compliance statements
myMultMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the My MULTICAST MIB"
MODULE -- this module
MANDATORY-GROUPS {
myIpMRouteInterfaceMIBGroup,
myIpRpfMIBGroup,
myMPingMIBGroup,
myIpMRouteMIBGroup,
myMrinfoMIBGroup,
myMultVidMIBGroup
}
::= { myMultMIBCompliances 1 }
-- conformance information
myIpMRouteInterfaceMIBGroup OBJECT-GROUP
OBJECTS {
myIpMRouteInterfaceIfIndex,
myIpMRouteInterfaceTtl,
myIpMRouteInterfaceProtocol,
myIpMRouteInterfaceRateLimit,
myIpMRouteInterfaceInMcastOctets,
myIpMRouteInterfaceOutMcastOctets,
myIpMRouteInterfaceHCInMcastOctets,
myIpMRouteInterfaceHCOutMcastOctets,
myIpMRouteBoundaryAclName
}
STATUS current
DESCRIPTION
"A collection of IP multicast route interface managment."
::= { myMultMIBGroups 1 }
myIpRpfMIBGroup OBJECT-GROUP
OBJECTS {
myIpRpfSourceAddress,
myIpRpfInterface,
myIpRpfNeighborAddress,
myIpRpfRouteAddress,
myIpRpfRouteMask,
myIpRpfType
}
STATUS current
DESCRIPTION
"A collection of IP RPF managment."
::= { myMultMIBGroups 2 }
myMPingMIBGroup OBJECT-GROUP
OBJECTS {
myMPingIndex,
myMPingGroupAddress,
myMPingGroupMember,
myMPingResponseTime,
myMPingDataLength,
myMPingTimeOuts,
myMPingCompleted,
myMPingEntryStauts
}
STATUS current
DESCRIPTION
"A collection of multicast ping managment."
::= { myMultMIBGroups 3 }
myIpMRouteMIBGroup OBJECT-GROUP
OBJECTS {
myIpMRouteGroup,
myIpMRouteSource,
myIpMRouteSourceMask,
myIpMRouteRP,
myIpMRoutePruneFlag,
myIpMRouteSparseFlag,
myIpMRouteConnectedFlag,
myIpMRouteLocalFlag,
myIpMRouteRegisterFlag,
myIpMRouteRpFlag,
myIpMRouteSptFlag,
myIpMRouteInLimit,
myIpMRouteLifeAvg,
myIpMrouteGroupPktsCount,
myIpMrouteSouceCount,
myIpMrouteRpPkts,
myIpMrouteRpPktsPerSec,
myIpMrouteRpAvgPktsSize,
myIpMrouteRpKilobitsPerSec,
myIpMrouteSoucePkts,
myIpMrouteSoucePktsPerSec,
myIpMrouteSouceAvgPktsSize,
myIpMrouteSouceKilobitsPerSec
}
STATUS current
DESCRIPTION
"A collection of IP multicast route managment."
::= { myMultMIBGroups 4 }
myMrinfoMIBGroup OBJECT-GROUP
OBJECTS {
myMrinfoIfAddress,
myMrinfoNeighbor,
myMrinfoTtlThreshold,
myMrinfoMetricOffset,
myMrinfoQuerier,
myMrinfoDown,
myMrinfoLeaf
}
STATUS current
DESCRIPTION
"A collection of multicast information"
::= { myMultMIBGroups 5 }
myMultVidMIBGroup OBJECT-GROUP
OBJECTS {
myMultInterfaceIfIndex,
myMultVlan
}
STATUS current
DESCRIPTION
"A collection of multicast vid information"
::= { myMultMIBGroups 6 }
END