781 lines
30 KiB
Plaintext
781 lines
30 KiB
Plaintext
PKTC-EN-SIG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32 FROM SNMPv2-SMI
|
|
ifIndex FROM IF-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
OBJECT-GROUP,
|
|
MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
pktcEnhancements
|
|
FROM CLAB-DEF-MIB
|
|
pktcNcsEndPntConfigEntry
|
|
FROM PKTC-SIG-MIB;
|
|
|
|
|
|
pktcEnSigMib MODULE-IDENTITY
|
|
LAST-UPDATED "200501280000Z" -- January 28, 2005
|
|
ORGANIZATION "Cable Television Laboratories, Inc "
|
|
CONTACT-INFO
|
|
"Sumanth Channabasappa
|
|
Postal: Cable Television Laboratories, Inc.
|
|
858 Coal Creek Circle
|
|
Louisville, Colorado 80027-9750
|
|
U.S.A.
|
|
Phone: +1 303-661-9100
|
|
Fax: +1 303-661-9199
|
|
E-mail: mibs@cablelabs.com"
|
|
|
|
DESCRIPTION
|
|
"This MIB module enhances the basic management
|
|
objects defined for PacketCable Signaling
|
|
protocols by the MIB group pktcSigMib.
|
|
|
|
Acknowledgements:
|
|
Rodney Osborne - Arris Interactive
|
|
Eugene Nechamkin - Broadcom Corporation
|
|
Satish Kumar - Texas Instruments
|
|
Jean-Francois Mule - CableLabs
|
|
|
|
|
|
Copyright 1999-2004 Cable Television Laboratories, Inc.
|
|
All rights reserved."
|
|
|
|
REVISION "200501280000Z"
|
|
|
|
DESCRIPTION
|
|
"This revision is being published as part of the PacketCable
|
|
Signaling MIBs enhancements for PacketCable 1.5."
|
|
::= { pktcEnhancements 2 }
|
|
|
|
|
|
|
|
--
|
|
-- Enhanced MIB Objects and Divisions.
|
|
--
|
|
pktcEnSigMibObjects OBJECT IDENTIFIER
|
|
::= { pktcEnSigMib 1 }
|
|
pktcEnSigDevConfigObjects OBJECT IDENTIFIER
|
|
::= { pktcEnSigMibObjects 1 }
|
|
pktcEnNcsEndPntConfigObjects OBJECT IDENTIFIER
|
|
::= { pktcEnSigMibObjects 2 }
|
|
pktcEnSigEndPntConfigObjects OBJECT IDENTIFIER
|
|
::= { pktcEnSigMibObjects 3 }
|
|
pktcEnDcsEndPntConfigObjects OBJECT IDENTIFIER
|
|
::= { pktcEnSigMibObjects 4 }
|
|
|
|
|
|
|
|
--
|
|
-- Enhanced Notification groups.
|
|
--
|
|
pktcEnSigNotificationPrefix OBJECT IDENTIFIER
|
|
::= { pktcEnSigMib 2 }
|
|
pktcEnSigNotification OBJECT IDENTIFIER
|
|
::= { pktcEnSigNotificationPrefix 0 }
|
|
pktcEnSigConformance OBJECT IDENTIFIER
|
|
::= { pktcEnSigMib 3 }
|
|
pktcEnSigCompliances OBJECT IDENTIFIER
|
|
::= { pktcEnSigConformance 1 }
|
|
pktcEnSigGroups OBJECT IDENTIFIER
|
|
::= { pktcEnSigConformance 2 }
|
|
|
|
|
|
|
|
|
|
pktcEnNcsMinimumDtmfPlayout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 40..100)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the minimum playout time for
|
|
the DTMF digit when IETF RFC 2833 DTMF Relay is used
|
|
for the egress gateway.
|
|
If the value set via this pktcEnNcsMinimumDtmfPlayout
|
|
object is different from that specified in RFC2833 packet,
|
|
then the MTA MUST use the maximum of the two values.
|
|
For example:
|
|
If the RFC 2833 packet specifies 23ms and if the object
|
|
pktcEnNcsMinimumDtmfPlayout is set to 40ms then
|
|
the egress gateway must use a value of 40ms.
|
|
Similarly if the RFC 2833 packet specifies
|
|
60 ms and if the object pktcEnNcsMinimumDtmfPlayout
|
|
is set to 40ms then the egress gateway must use a
|
|
value of 60 ms."
|
|
REFERENCE
|
|
"PacketCable(tm) Codec Specification"
|
|
DEFVAL {0}
|
|
::= { pktcEnSigDevConfigObjects 1}
|
|
|
|
|
|
--
|
|
-- The following table enhances the NCS End Point Config Table
|
|
-- (pktcNcsEndPntConfigTable) defined in pktSigMib.
|
|
--
|
|
--
|
|
pktcEnNcsEndPntConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcEnNcsEndPntConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table augments pktcNcsEndPntConfigTable."
|
|
::= { pktcEnNcsEndPntConfigObjects 1 }
|
|
|
|
|
|
pktcEnNcsEndPntConfigEntry OBJECT-TYPE
|
|
SYNTAX PktcEnNcsEndPntConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enhancement to pktcNcEndPntConfigTable - where each
|
|
entry describes endpoint characteristics."
|
|
AUGMENTS { pktcNcsEndPntConfigEntry }
|
|
::= { pktcEnNcsEndPntConfigTable 1 }
|
|
|
|
|
|
PktcEnNcsEndPntConfigEntry ::=
|
|
SEQUENCE {
|
|
pktcEnNcsEndPntQuarantineState INTEGER,
|
|
pktcEnNcsEndPntHookState INTEGER,
|
|
pktcEnNcsEndPntFaxDetection TruthValue,
|
|
pktcEnNcsEndPntStatusReportCtrl INTEGER
|
|
}
|
|
|
|
|
|
pktcEnNcsEndPntQuarantineState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal (1),
|
|
notification (2),
|
|
lockstep (3),
|
|
extendedlockstep (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object reflects the state of the Endpoint.
|
|
When the endpoint is in notification, lockstep or
|
|
values 'extended lockstep' states, the E-MTA MUST report
|
|
the of notification(2), lockstep(3) or extendedlockstep(
|
|
4),respectively. Else, the endpoint MUST report a value of
|
|
of normal(1).
|
|
'Extended Lockstep' is defined as the state when the
|
|
E-MTA is in the lockstep state for longer than 2 minutes.
|
|
For more description about the states refer
|
|
to the PacketCable Network Based Call signaling
|
|
specification."
|
|
REFERENCE
|
|
"PacketCable(tm) Network-Based Call Signaling Protocol
|
|
Specification,"
|
|
::= { pktcEnNcsEndPntConfigEntry 1 }
|
|
|
|
|
|
pktcEnNcsEndPntHookState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
onHook (1),
|
|
onHookPlusNCSActivity (2),
|
|
offHook (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object reflects the 'hook state' and 'NCS Activity'
|
|
of an endpoint.
|
|
'NCS Activity', by definition includes: an active
|
|
timeout signal, active brief signal or existence of
|
|
an NCS connection.
|
|
The onHook(1) state indicates that the endpoint is
|
|
'on hook' and the absence of 'NCS Activity' on that
|
|
endpoint.
|
|
The onHookPlusNCSActivity(2) indicates that the endpoint
|
|
is 'on hook' and the presence of 'NCS Activity' on that
|
|
endpoint.
|
|
The offHook(3) state indicates that the endpoint is
|
|
'off hook'."
|
|
|
|
REFERENCE
|
|
"PacketCable(tm) Network-Based Call Signaling Protocol Specification"
|
|
::= { pktcEnNcsEndPntConfigEntry 2 }
|
|
|
|
|
|
pktcEnNcsEndPntFaxDetection OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object is used to configure
|
|
the distinctive fax calling tone (CNG) detection feature
|
|
on an MTA endpoint with reference to the analog interface[po1].
|
|
When set to true, the MTA MUST enable the detection
|
|
of CNG tones on the specific endpoint.
|
|
When set to false, the MTA MUST disable the detection
|
|
of CNG tones on the specific endpoint.
|
|
If a connection already exists on the endpoint when this
|
|
MIB Object is modified, then the setting needs to take
|
|
effect on the next connection."
|
|
|
|
DEFVAL {false}
|
|
::= { pktcEnNcsEndPntConfigEntry 3}
|
|
|
|
pktcEnNcsEndPntStatusReportCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unsupported (1),
|
|
reportActualStatus (2),
|
|
reportEndPointAsActive (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This MIB object is be used to control
|
|
the Endpoint Status Reporting, if the feature is
|
|
supported by the MTA and is configurable.
|
|
The term 'Endpoint Status Reporting' refers to any
|
|
information that the MTA may provide to External
|
|
Systems for use in a particular reporting mechanism
|
|
(Ex: Home Alarm Systems). The definition of the External
|
|
Systems and reporting mechanism are beyond the scope
|
|
of this definition (In the example of Home Alarm Systems,
|
|
this MIB Object will allow Management Stations to
|
|
temporarily disable outage reporting on an EndPoint
|
|
during planned downtime).
|
|
If supported, the MTA MUST:
|
|
- reflect the actual Endpoint status when the value
|
|
is set to 'reportActualStatus(2)'
|
|
- reflect the EndPoint status as being active when the
|
|
value is set to 'reportEndPointAsActive(3)',
|
|
irrespective of the actual status.
|
|
If unsupported, the MTA MUST set this value to
|
|
'unsupported(1)' and reject any attempt to set
|
|
this MIB object using SNMP SET to any other value."
|
|
::= { pktcEnNcsEndPntConfigEntry 4}
|
|
|
|
|
|
pktcEnEndPntInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcEnEndPntInfoTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes any additional information
|
|
associated with PacketCable EndPoints.
|
|
The number of entries in this table represents the
|
|
number of available PacketCable EndPoints."
|
|
::= { pktcEnNcsEndPntConfigObjects 2 }
|
|
|
|
|
|
pktcEnEndPntInfoTableEntry OBJECT-TYPE
|
|
SYNTAX PktcEnEndPntInfoTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table MUST be created for each
|
|
PacketCable EndPoint.
|
|
The index needs to be the corresponding index in the ifTable
|
|
for the associated PacketCable EndPoint."
|
|
INDEX { ifIndex }
|
|
::= { pktcEnEndPntInfoTable 1 }
|
|
|
|
|
|
PktcEnEndPntInfoTableEntry ::=
|
|
SEQUENCE {
|
|
pktcEnEndPntFgnPotSupport BITS,
|
|
pktcEnEndPntFgnPotDescr SnmpAdminString,
|
|
pktcEnEndPntClrFgnPotTsts BITS,
|
|
pktcEnEndPntRunFgnPotTsts BITS,
|
|
pktcEnEndPntFgnTestValidity BITS,
|
|
pktcEnEndPntFgnTestResults BITS
|
|
}
|
|
|
|
|
|
pktcEnEndPntFgnPotSupport OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
fgnPotDetection (0),
|
|
hazardousFgnPotDetection (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object indicates the capabilities of the MTA to
|
|
detect various conditions related to the presence of
|
|
foreign potential on an endpoint.
|
|
The MTA MUST set a value of '1' for each bit corresponding
|
|
to a supported functionality and a value of '0' for each
|
|
bit corresponding to an unsupported functionality."
|
|
::= { pktcEnEndPntInfoTableEntry 1 }
|
|
|
|
|
|
pktcEnEndPntFgnPotDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object provides information related to the
|
|
various tests for each detection mechanism supported by
|
|
the MTA. While the actual contents are vendor-specific,
|
|
the recommended format is:
|
|
[<Capability>:<Test References>:<Other Info>]...
|
|
Example:
|
|
<fgnPotDetection>:<test XYZ, Reference 'Document'>:<NA>;
|
|
<hazardousFngPotDetection>:<Test ABC, References>:<NA>
|
|
"
|
|
::= { pktcEnEndPntInfoTableEntry 2 }
|
|
|
|
|
|
pktcEnEndPntClrFgnPotTsts OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
clrFgnPotentialResults (0),
|
|
clrHazardousPotResults (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object is used to clear the current test
|
|
results of supported conditions indicated by
|
|
'pktcEnEndPntFgnPotSupport'.
|
|
Setting a bit to a value of '1' clears the corresponding
|
|
results in the MIB Object 'pktcEnEndPntFgnTestResults' and
|
|
the validity as indicated by the MIB object
|
|
'pktcEnEndPntFgnTestValidity' for the supported
|
|
conditions only (i.e, the MTA MUST set the corresponding
|
|
bits to a value of '0' in the indicated tables).
|
|
If an SNMP SET attempts to set a bit corresponding to an
|
|
unsupported condition to a value of '1', then the MTA MUST
|
|
reject the entire SNMP SET and report an 'inconsistent
|
|
value' error.
|
|
For all unsupported scenarios, the corresponding bits MUST
|
|
be set to a value of '0'.
|
|
Whenever one or more tests are enabled by the MIB Object
|
|
'pktcEnEndPntRunFgnPotTests', the MTA MUST also reset the
|
|
corresponding bits in this MIB Object to a value of '0'."
|
|
::= { pktcEnEndPntInfoTableEntry 3}
|
|
|
|
|
|
pktcEnEndPntRunFgnPotTsts OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
runFgnPotentialTsts (0),
|
|
runHazardousPotTsts (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object is used to initiate one or more test cases
|
|
associated with a supported foreign potential detection.
|
|
Thus, whenever one or more BITS corresponding to supported
|
|
foreign scenario potential detection mechanisms are set to
|
|
a value of '1', the MTA MUST enable those tests.
|
|
Once the tests are executed, the MTA MUST:
|
|
- set the corresponding bit to a value of '0'
|
|
- update the corresponding BITS in the MIB Objects
|
|
'pktcEnEndPntFgnTestValidity' and
|
|
'pktcEnEndPntFgnTestResults'.
|
|
If an SNMP SET attempts to set a bit corresponding to an
|
|
unsupported condition to a value of '1', then the MTA MUST
|
|
reject the entire SNMP SET and report an 'inconsistent
|
|
value' error.
|
|
Whenever a test is being run on an EndPoint the MTA MUST
|
|
set the corresponding 'ifOperStatus' MIB Object to a
|
|
value of 'testing(3)' for the whole duration of the test.
|
|
When the test is completed, the MTA MUST set the
|
|
ifOperStatus to the value corresponding to the current
|
|
state of the line.
|
|
|
|
Note: Whenever multiple tests are run, the ordering of the
|
|
tests or the results is vendor dependent and need not
|
|
necessarily follow the ordering of BITS in this MIB
|
|
Object."
|
|
::= { pktcEnEndPntInfoTableEntry 4}
|
|
|
|
|
|
pktcEnEndPntFgnTestValidity OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
fgnPotTstValidity (0),
|
|
hazardousPotTstValidity (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object is used to indicate the validity of the
|
|
corresponding test cases that were initiated using the MIB
|
|
Object 'pktcEnEndPntRunFgnPotTests'.
|
|
An MTA MUST:
|
|
- return a value of '1' if the tests were run successfully
|
|
and the results are valid.
|
|
- return a value of '0' if a particular test was not
|
|
initiated or if the tests could not be run successfully
|
|
and hence the results are invalid.
|
|
Note: The MTA MUST set all the BITS to '0' as soon as one
|
|
or more test cases are initiated."
|
|
::= { pktcEnEndPntInfoTableEntry 5}
|
|
|
|
|
|
pktcEnEndPntFgnTestResults OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
fgnPotentialResults (0),
|
|
hazardousPotResults (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object is used to indicate the results of the
|
|
corresponding test cases that were initiated using the MIB
|
|
Object 'pktcEnEndPntRunFgnPotTests'.
|
|
An MTA MUST:
|
|
- set the corresponding bit to a value of '1' if the tests
|
|
indicated the presence of a foreign potential as per the
|
|
associated test case.
|
|
- set the corresponding bit to a value of '0' if the tests
|
|
indicated the absence of a foreign potential as per the
|
|
associated test case.
|
|
Note: The MTA MUST set all the BITS to '0' as soon as one or
|
|
more test cases are initiated."
|
|
::= { pktcEnEndPntInfoTableEntry 6}
|
|
|
|
pktcEnNcsEndPntLVMgmtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PktcEnNcsEndPntLVMgmtTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB table contains the MIB Objects used for
|
|
managing loop voltage on an MTA. An MTA MUST
|
|
implement the defined MIB Objects and the associated
|
|
functionality."
|
|
::= { pktcEnNcsEndPntConfigObjects 3 }
|
|
|
|
pktcEnNcsEndPntLVMgmtTableEntry OBJECT-TYPE
|
|
SYNTAX PktcEnNcsEndPntLVMgmtTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this MIB table consists of the
|
|
loop voltage management policy for the specified
|
|
index. The MTA MUST use the ifIndex with a value of '1'
|
|
to represent the E-MTA and the remaining indices
|
|
(if used) to represent the endpoints (as specified
|
|
in [1]).
|
|
|
|
When the ifIndex is set to a value of '1', it represents
|
|
a policy that MUST be applied to all the lines on an MTA.
|
|
|
|
A MTA MUST support access to this MIB Object via the
|
|
ifIndex set to a value of '1' (i.e., per-device policy). "
|
|
REFERENCE "PacketCable Device Provisioning specification [1]"
|
|
INDEX { ifIndex }
|
|
::= { pktcEnNcsEndPntLVMgmtTable 1 }
|
|
|
|
|
|
PktcEnNcsEndPntLVMgmtTableEntry ::=
|
|
SEQUENCE {
|
|
pktcEnNcsEndPntLVMgmtPolicy INTEGER,
|
|
pktcEnNcsEndPntLVMgmtResetTimer Unsigned32,
|
|
pktcEnNcsEndPntLVMgmtMaintTimer Unsigned32
|
|
}
|
|
|
|
pktcEnNcsEndPntLVMgmtPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
voltageAtAllTimes(1),
|
|
voltageUnlessRFQAMabsent(2),
|
|
voltageBasedOnServiceOrTimers(3),
|
|
voltageBasedOnService(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This MIB Object allows the Service Provider to choose
|
|
a suitable policy for Loop Voltage behavior on MTAs.
|
|
|
|
Unless overridden by the operator, the MTA MUST use the
|
|
default value specified in the definition of this MIB
|
|
Object.
|
|
|
|
The MTA MUST adhere to PacketCable signaling
|
|
requirements, such as the NCS open loop voltage requirement,
|
|
irrespective of any chosen policy.
|
|
|
|
For MTAs that need to remove loop voltage during the MTA
|
|
initialization phase, in contradiction to a chosen policy,
|
|
such a loop voltage removal period MUST NOT exceed 1000ms.
|
|
|
|
|
|
The MTA MUST retain the value of this MIB Object across
|
|
hard reboots or soft resets (for a definition of the terms,
|
|
please refer to [1]).
|
|
|
|
This MIB object specifies four policies. An informative
|
|
illustration of the E-MTA behavior with different policies
|
|
is presented in Appendix A.
|
|
|
|
|
|
Provisioned line is an MTA Endpoint that has been provided
|
|
with valid per-line configuration data either via the
|
|
configuration file (during provisioning) or the SNMP
|
|
management interface.
|
|
|
|
When the MIB Object is set to a value of
|
|
voltage_at_all_times(1), - indicating Policy 1 -
|
|
the MTA MUST maintain the loop idle voltage on all
|
|
lines, irrespective of the line status.
|
|
|
|
|
|
When this MIB Object is set to a value of
|
|
voltage_unless_RF_QAM_absent(2)- indicating Policy 2
|
|
- the MTA MUST apply loop idle voltage at all
|
|
times except when it confirms the absence of any
|
|
RF QAM carrier, following a complete scan of the
|
|
spectrum (i.e., loop voltage is maintained during
|
|
the scan). When the MTA detects the presence of any
|
|
RF QAM carrier, it MUST apply the loop idle voltage.
|
|
Additionally, the following conditions apply:
|
|
- during a hard reboot, this policy applies at all
|
|
lines until the MTA is successfully provisioned (
|
|
i.e., pktcMtaDevProvisioningState has a value
|
|
other than 'inProgress')
|
|
- once the MTA is successfully provisioned (
|
|
(i.e., pktcMtaDevProvisioningState has a value
|
|
of 'pass(1)', 'passWithWarnings(4)' or
|
|
'passWithIncompleteParsing(5)') then the policy
|
|
applies to all provisioned lines
|
|
- upon the onset of a re-initialization due to a
|
|
soft reset (via SNMP or Rf conditions) the MTA MUST
|
|
continue to maintain the existing policy and state
|
|
on previously provisioned lines, unless overridden
|
|
by a policy or the provisioning process specifies
|
|
otherwise
|
|
|
|
This policy is similar to Policy 1, except for the
|
|
ability to recognize events like cable cuts (due to
|
|
malicious activities, or otherwise).
|
|
|
|
|
|
The following requirements apply to policies 3 and 4:
|
|
- upon the onset of a re-initialization due to a soft reset
|
|
the MTA MUST continue to maintain the existing policy and
|
|
state on provisioned lines, unless overridden by a policy
|
|
or the provisioning process specifies otherwise
|
|
- once the provisioning process is completed with the value
|
|
of the MIB Object pktcMtaDevProvisioningState set to a
|
|
value of 'pass(1)', 'passWithWarnings(4)' or
|
|
'passWithIncompleteParsing(5)', the MTA MUST apply the
|
|
chosen policy to all the provisioned lines
|
|
|
|
When this MIB Object is set to a value of
|
|
voltage_based_on_service_or_timers(3)- indicating Policy 3 -
|
|
the MTA MUST adhere to the requirements that follow
|
|
at any given point in time:
|
|
|
|
- when the timer defined by
|
|
pktcEnNcsEndPntLVMgmtResetTimer has
|
|
a non-zero value, the MTA MUST apply loop idle voltage
|
|
under all circumstances (similar to policy 1).
|
|
Refer to the definition of the MIB Object for the
|
|
persistence and timer requirements.
|
|
|
|
- when the timer defined by
|
|
pktcEnNcsEndPntLVMgmtMaintTimer has
|
|
a non-zero value, the MTA MUST maintain a line's loop
|
|
idle voltage state that was in effect prior to the timer
|
|
being set to a non-zero value. Refer to the definition
|
|
of the MIB Object defining the timer for the persistence
|
|
and timer requirements.
|
|
|
|
- When the timers defined by
|
|
pktcEnNcsEndPntLVMgmtMaintTimer and
|
|
pktcEnNcsEndPntLVMgmtResetTimer have
|
|
expired (both have a value of zero), then:
|
|
= the MTA MUST apply loop voltage if the provisioning
|
|
process is completed with the value of
|
|
pktcMtaDevProvisioningState set to a value of
|
|
than 'pass(1)', 'passWithWarnings(4)' or
|
|
'passWithIncompleteParsing(5)'
|
|
= During a T4 timeout (note: the timers have expired),
|
|
the E-MTA MUST remove loop idle voltage on all lines
|
|
|
|
- When both the timers are active (i.e., they both have
|
|
non-zero values), then the timer defined by the MIB
|
|
Object pktcEnNcsEndPntLVMgmtMaintTimer takes precedence
|
|
|
|
- if none of the above cases apply, the MTA MUST remove
|
|
loop idle voltage on all lines
|
|
|
|
When the MIB Object is set to a value of
|
|
voltage_based_on_service(4) - indicating Policy 4 - the
|
|
following conditions apply at any given point in time:
|
|
|
|
- the MTA MUST apply loop idle voltage to all
|
|
the provisioned lines if the value of the MIB Object
|
|
'pktcMtaDevProvisioningState' is set to a
|
|
value of 'pass(1)', 'passWithWarnings(4)'
|
|
or 'passWithIncompleteParsing(5)'
|
|
|
|
- in all other cases, the MTA
|
|
MUST remove loop idle voltage on all lines."
|
|
REFERENCE "PacketCable Device Provisioning specification [1]"
|
|
DEFVAL { voltageBasedOnService }
|
|
::= { pktcEnNcsEndPntLVMgmtTableEntry 1}
|
|
|
|
|
|
pktcEnNcsEndPntLVMgmtResetTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1440)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB Object specifies the time duration allowed for
|
|
an MTA to successfully provision and is only applicable when
|
|
the MIB Object pktcEnNcsEndPntLVMgmtPolicy is
|
|
set to a value of 'voltage_based_on_service_or_timers(3)'.
|
|
In all other cases, the MTA MUST:
|
|
- return a value of '0' upon any retrieval requests
|
|
- return an error of 'inconsistentValue' upon any
|
|
modification requests
|
|
|
|
The value contained by this MIB Object is a countdown timer
|
|
and the MTA MUST start counting down the configured value
|
|
only upon a hard reboot, a soft reset or a T4 timeout. Once
|
|
this timer has reached a value of zero, the MTA MUST retain
|
|
the value (of zero) until successfully configured otherwise.
|
|
The MTA MUST use a change in the value of this MIB Object
|
|
only on the next hard reboot, soft reset or T4 timeout.
|
|
|
|
The MTA MUST persist the last configured value (i.e., not
|
|
the countdown value) of this MIB Object across hard reboots
|
|
and soft resets.
|
|
|
|
Refer to the MIB Object pktcEnNcsEndPntLVMgmtPolicy for
|
|
usage within 'voltage_based_on_service_or_timers(3)'."
|
|
|
|
DEFVAL { 5 }
|
|
::= { pktcEnNcsEndPntLVMgmtTableEntry 2}
|
|
|
|
|
|
|
|
pktcEnNcsEndPntLVMgmtMaintTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1440)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB Object allows the operator to specify the time that
|
|
loop voltage condition will be maintained, irrespective of
|
|
the changes to the MTA. It is only applicable when the MIB
|
|
Object pktcEnNcsEndPntLVMgmtPolicy is set to a
|
|
value of 'voltage_based_on_service_or_timers(3)'. In all
|
|
other cases, the MTA MUST:
|
|
- return a value of '0' upon any retrieval requests
|
|
- return an error of 'inconsistentValue' upon any
|
|
modification requests
|
|
|
|
The value contained in this MIB Object is a countdown timer
|
|
and the MTA MUST start counting down the value immediately
|
|
after a successful configuration to a non-zero value. Once
|
|
this timer has reached a value of zero, the MTA MUST retain
|
|
the value (of zero) until successfully configured otherwise.
|
|
|
|
The MTA MUST retain the value of this MIB Object (i.e., the
|
|
countdown value) across soft resets. The MTA MUST reset the
|
|
value of this MIB Object (to its default value) during a
|
|
hard reboot of the MTA.
|
|
|
|
Refer to the MIB Object pktcEnNcsEndPntLVMgmtPolicy for
|
|
information about applicability and usage."
|
|
|
|
DEFVAL { 0 }
|
|
::= { pktcEnNcsEndPntLVMgmtTableEntry 3}
|
|
|
|
--
|
|
-- Conformance group for common Signaling.
|
|
--
|
|
pktcEnSigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
pktcEnNcsMinimumDtmfPlayout
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enhanced group of objects for the common portion of the
|
|
PacketCable Signaling MIB."
|
|
::= { pktcEnSigGroups 1 }
|
|
--
|
|
-- Conformance group for NCS Signaling.
|
|
--
|
|
pktcEnNcsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
pktcEnNcsEndPntQuarantineState,
|
|
pktcEnNcsEndPntHookState,
|
|
pktcEnNcsEndPntFaxDetection,
|
|
pktcEnEndPntFgnPotSupport,
|
|
pktcEnEndPntFgnPotDescr,
|
|
pktcEnEndPntClrFgnPotTsts,
|
|
pktcEnEndPntRunFgnPotTsts,
|
|
pktcEnEndPntFgnTestValidity,
|
|
pktcEnEndPntFgnTestResults
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enhanced group of objects for the NCS portion of the
|
|
PacketCable Signaling MIB. This is mandatory for
|
|
NCS signaling support."
|
|
::= { pktcEnSigGroups 2 }
|
|
|
|
--
|
|
-- Conformance group for Loop Voltage Management
|
|
--
|
|
pktcEnNcsLVMgmtGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
pktcEnNcsEndPntLVMgmtPolicy,
|
|
pktcEnNcsEndPntLVMgmtResetTimer,
|
|
pktcEnNcsEndPntLVMgmtMaintTimer
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enhanced group of objects for the loop voltage
|
|
Management of PacketCable MTAs based on Signaling
|
|
and configured policies."
|
|
::= { pktcEnSigGroups 3 }
|
|
|
|
pktcEnNcsDeprecatedGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
pktcEnNcsEndPntStatusReportCtrl
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This contains a list of deprecated Extension
|
|
Signaling MIB Objects."
|
|
::= { pktcEnSigGroups 4 }
|
|
|
|
--
|
|
-- Compliance statements
|
|
--
|
|
pktcEnSigBasicCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that implement
|
|
PacketCable defined Signaling on an MTA."
|
|
|
|
MODULE PKTC-EN-SIG-MIB
|
|
|
|
|
|
--
|
|
-- Mandatory groups
|
|
--
|
|
MANDATORY-GROUPS {
|
|
pktcEnSigGroup
|
|
}
|
|
GROUP pktcEnNcsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for any MTA implementing
|
|
PacketCable signaling."
|
|
::={ pktcEnSigCompliances 1 }
|
|
|
|
|
|
|
|
|
|
|
|
END
|
|
|
|
|
|
|