1341 lines
44 KiB
Plaintext
1341 lines
44 KiB
Plaintext
Modem-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
|
|
Counter32, Integer32 FROM SNMPv2-SMI
|
|
DisplayString FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
mib-2 FROM RFC1213-MIB;
|
|
|
|
mdmMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9406120000Z"
|
|
ORGANIZATION "IETF Modem Management Working Group"
|
|
|
|
CONTACT-INFO
|
|
" Steven Waldbusser
|
|
Postal: Carnegie Mellon University
|
|
5000 Forbes Ave
|
|
Pittsburgh, PA, 15213
|
|
US
|
|
|
|
Tel: +1 412 268 6628
|
|
Fax: +1 412 268 4987
|
|
E-mail: waldbusser@cmu.edu"
|
|
DESCRIPTION
|
|
"The MIB module for management of dial-up modems."
|
|
::= { mdmMib 1 }
|
|
|
|
mdmMib OBJECT IDENTIFIER ::= { mib-2 38 }
|
|
|
|
mdmMIBObjects OBJECT IDENTIFIER ::= { mdmMIB 1 }
|
|
|
|
-- conformance information
|
|
|
|
mdmConformance OBJECT IDENTIFIER ::= { mdmMIB 2 }
|
|
|
|
mdmCompliances OBJECT IDENTIFIER ::= { mdmConformance 1 }
|
|
mdmGroups OBJECT IDENTIFIER ::= { mdmConformance 2 }
|
|
|
|
-- units of conformance
|
|
|
|
mdmIDGroup OBJECT-GROUP
|
|
OBJECTS { mdmIDManufacturerOID, mdmIDProductDetails }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that identify the manufacturer and
|
|
model information for a modem."
|
|
::= { mdmGroups 1 }
|
|
|
|
mdmLineInterfaceGroup OBJECT-GROUP
|
|
OBJECTS { mdmLineCarrierLossTime,
|
|
mdmLineState, mdmLineCapabilitiesID,
|
|
mdmLineCapabilitiesEnableRequested,
|
|
mdmLineCapabilitiesEnableGranted }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that describe the configuration and
|
|
state of the modem's line interface."
|
|
::= { mdmGroups 2 }
|
|
|
|
mdmDTEInterfaceGroup OBJECT-GROUP
|
|
|
|
OBJECTS { mdmDTEActionDTROnToOff, mdmDTEActionDTROffToOn,
|
|
mdmDTESyncTimingSource, mdmDTESyncAsyncMode,
|
|
mdmDTEInactivityTimeout }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that describe the configuration and
|
|
state of the modem's DTE interface."
|
|
::= { mdmGroups 3 }
|
|
|
|
mdmCallControlGroup OBJECT-GROUP
|
|
OBJECTS { mdmCCRingsBeforeAnswer,
|
|
mdmCCCallSetUpFailTimer, mdmCCResultCodeEnable,
|
|
mdmCCEscapeAction, mdmCCCallDuration,
|
|
mdmCCConnectionFailReason, mdmCCStoredDialString }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that describe the configuration of
|
|
call control capabilities on the modem and the status of
|
|
calls placed with this modem."
|
|
::= { mdmGroups 4 }
|
|
|
|
mdmErrorControlGroup OBJECT-GROUP
|
|
OBJECTS { mdmECErrorControlUsed }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that describe the configuration and
|
|
state of error control on a modem."
|
|
::= { mdmGroups 5 }
|
|
|
|
mdmDataCompressionGroup OBJECT-GROUP
|
|
OBJECTS { mdmDCCompressionTypeUsed }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that describe the configuration and
|
|
state of data compression on a modem."
|
|
::= { mdmGroups 6 }
|
|
|
|
mdmSignalConvertorGroup OBJECT-GROUP
|
|
OBJECTS { mdmSCCurrentLineReceiveRate, mdmSCCurrentLineTransmitRate,
|
|
mdmSCInitialLineReceiveRate, mdmSCInitialLineTransmitRate,
|
|
mdmSCModulationSchemeUsed }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that describe the configuration and
|
|
state of error control on a modem."
|
|
::= { mdmGroups 7 }
|
|
|
|
mdmStatisticsGroup OBJECT-GROUP
|
|
|
|
OBJECTS { mdmStatsRingNoAnswers,
|
|
mdmStatsIncomingConnectionFailures,
|
|
mdmStatsIncomingConnectionCompletions,
|
|
mdmStatsFailedDialAttempts,
|
|
mdmStatsOutgoingConnectionFailures,
|
|
mdmStatsOutgoingConnectionCompletions,
|
|
mdmStatsRetrains,
|
|
mdmStats2400OrLessConnections, mdmStats2400To14400Connections,
|
|
mdmStatsGreaterThan14400Connections,
|
|
mdmStatsErrorControlledConnections,
|
|
mdmStatsCompressedConnections,
|
|
mdmStatsCompressionEfficiency,
|
|
mdmStatsSentOctets, mdmStatsReceivedOctets,
|
|
mdmStatsSentDataFrames, mdmStatsReceivedDataFrames,
|
|
mdmStatsResentFrames, mdmStatsErrorFrames }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that describe the state of calls on
|
|
this modem."
|
|
::= { mdmGroups 8 }
|
|
|
|
mdmNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of modem rows in the modem table. This value
|
|
defines the maximum value of the mdmIndex object."
|
|
::= { mdmMIBObjects 1 }
|
|
|
|
-- The modem ID table.
|
|
|
|
mdmIDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MdmIDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The base table for the modems managed by this MIB. The
|
|
mdmLineTable, mdmDTEInterfaceTable, mdmCallControlTable, and
|
|
mdmStatsTable all augment the rows defined in this table."
|
|
::= { mdmMIBObjects 2 }
|
|
|
|
mdmIDEntry OBJECT-TYPE
|
|
SYNTAX MdmIDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries in this table are created only by the agent. One
|
|
|
|
entry exists for each modem managed by the agent."
|
|
INDEX { mdmIndex }
|
|
::= { mdmIDTable 1 }
|
|
|
|
MdmIDEntry ::= SEQUENCE {
|
|
mdmIndex Integer32,
|
|
mdmIDManufacturerOID OBJECT IDENTIFIER,
|
|
mdmIDProductDetails DisplayString
|
|
}
|
|
|
|
mdmIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique number for each modem that ranges from 1 to
|
|
mdmNumber. The value must remain constant at least from one
|
|
re-initialization of the network management agent to the
|
|
next."
|
|
::= { mdmIDEntry 1 }
|
|
|
|
mdmIDManufacturerOID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is intended to identify the manufacturer, model,
|
|
and version of this modem. This may be used to identify the
|
|
existance of enterprise-specific functions and behaviours."
|
|
REFERENCE
|
|
"V.58 attribute manufacturerID subfield ManufacturerOI"
|
|
::= { mdmIDEntry 2 }
|
|
|
|
mdmIDProductDetails OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..79))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual description of this device, including the
|
|
manufacturer's name, modem model name, hardware revision,
|
|
firmware revision, and optionally, its serial number. The
|
|
exact format of this description is defined by the vendor.
|
|
This description may only contain characters from the NVT
|
|
ASCII character set."
|
|
REFERENCE
|
|
"V.58 attribute manufacturerID subfield productDetails"
|
|
::= { mdmIDEntry 3 }
|
|
|
|
-- The modem Line Interface Table
|
|
|
|
mdmLineTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MdmLineEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modem Line Table augments the modem ID table."
|
|
::= { mdmMIBObjects 3 }
|
|
|
|
mdmLineEntry OBJECT-TYPE
|
|
SYNTAX MdmLineEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries in this table are created only by the agent. One
|
|
entry exists for each modem managed by the agent."
|
|
AUGMENTS { mdmIDEntry }
|
|
::= { mdmLineTable 1 }
|
|
|
|
MdmLineEntry ::= SEQUENCE {
|
|
mdmLineCarrierLossTime Integer32,
|
|
mdmLineState INTEGER
|
|
}
|
|
|
|
mdmLineCarrierLossTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Duration in 10ths of a second the modem waits after loss of
|
|
carrier before hanging up. If this value is set to `255',
|
|
the modem will not hang up upon loss of carrier. This
|
|
allows the modem to distinguish between a momentary lapse in
|
|
line quality and a true disconnect and can be useful to tune
|
|
the tolerance of the modem to lines of poor quality."
|
|
REFERENCE "V.58 lineSignalFailDisconnectTimer"
|
|
::= { mdmLineEntry 1 }
|
|
|
|
mdmLineState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
onHook(2),
|
|
offHook(3), -- and not connected
|
|
connected(4),
|
|
busiedOut(5),
|
|
reset(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the inspection and alteration of the state of the
|
|
modem. Management commands may change the state to `on-
|
|
hook', `busied-out', or `reset' from any state. No other
|
|
alterations are permitted from the management protocol.
|
|
When this object is set to reset, the modem shall be reset
|
|
and the value will change to the modem's new, implementation
|
|
dependent state."
|
|
::= { mdmLineEntry 2 }
|
|
|
|
mdmLineCapabilitiesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MdmLineCapabilitiesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of protocol capabilities for this modem."
|
|
::= { mdmMIBObjects 4 }
|
|
|
|
mdmLineCapabilitiesEntry OBJECT-TYPE
|
|
SYNTAX MdmLineCapabilitiesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A listing of the protocol(s) that this modem is capable of.
|
|
Entries in this table are created only by the agent. One
|
|
entry exists for each protocol that the modem is capable of,
|
|
regardless of whether that protocol is enabled or not.
|
|
|
|
This table is useful for providing an inventory of the
|
|
capabilities on a modem, and allowing the manager to enable
|
|
or disable capabilities from the menu of available
|
|
possibilities. Row creation is not required to enable or
|
|
disable capabilities."
|
|
INDEX { mdmIndex, mdmLineCapabilitiesIndex }
|
|
::= { mdmLineCapabilitiesTable 1 }
|
|
|
|
MdmLineCapabilitiesEntry ::= SEQUENCE {
|
|
mdmLineCapabilitiesIndex Integer32,
|
|
mdmLineCapabilitiesID OBJECT IDENTIFIER,
|
|
mdmLineCapabilitiesEnableRequested INTEGER,
|
|
mdmLineCapabilitiesEnableGranted INTEGER
|
|
}
|
|
|
|
mdmLineCapabilitiesIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique index for this capabilities entry."
|
|
::= { mdmLineCapabilitiesEntry 1 }
|
|
|
|
mdmLineCapabilitiesID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An identifier for this capability. Standard protocol
|
|
capabilities will have identifiers registered in this
|
|
document or other companion standards documents.
|
|
Proprietary protocol capabilities will be registered by
|
|
their respective organization. All capabilities, standard
|
|
or vendor-specific, shall be registered in this table."
|
|
::= { mdmLineCapabilitiesEntry 2 }
|
|
|
|
mdmLineCapabilitiesEnableRequested OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
optional(2),
|
|
preferred(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The requested configuration of this capability. If this
|
|
value is 'disabled(1)', this is a request to disable this
|
|
protocol. If this value is 'preferred(3)', this is a
|
|
request to enable this protocol, and to prefer it in any
|
|
negotiation over other appropriate protocols that have a
|
|
value of 'optional(2)'."
|
|
DEFVAL { preferred }
|
|
::= { mdmLineCapabilitiesEntry 3 }
|
|
|
|
mdmLineCapabilitiesEnableGranted OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
optional(2),
|
|
preferred(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual configuration of this capability. The agent
|
|
shall attempt to set this as close as possible to the
|
|
associated mdmLineCapabilitiesEnableRequested value. The
|
|
|
|
agent shall make this determination in an implementation-
|
|
specific manner that may take into account the configuration
|
|
of other capabilities or other considerations. The modem
|
|
will choose in an implementation-specific manner between
|
|
multiple mutually-exclusive capabilities that each have the
|
|
same (non-disabled) value. However, the modem must prefer
|
|
all capabilities with a value of 'preferred(3)' over all
|
|
capabilities with a value of 'optional(2)'.
|
|
|
|
In other words, if there are one or more mutually-exclusive
|
|
capabilities (e.g. V.32 and V.32bis) that are set to
|
|
`preferred', the agent must choose one in an
|
|
implementation-specific manner. Otherwise, if there are one
|
|
or more mutually-exclusive capabilities that are set to
|
|
`optional', the agent must choose one in an implementation-
|
|
specific manner."
|
|
::= { mdmLineCapabilitiesEntry 4 }
|
|
|
|
mdmLineCapabilities OBJECT IDENTIFIER ::= { mdmMIBObjects 5 }
|
|
|
|
mdmLineCapabilitiesV21 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.21"
|
|
::= { mdmLineCapabilities 1 }
|
|
|
|
mdmLineCapabilitiesV22 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.22"
|
|
::= { mdmLineCapabilities 2 }
|
|
|
|
mdmLineCapabilitiesV22bis OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.22bis"
|
|
::= { mdmLineCapabilities 3 }
|
|
|
|
mdmLineCapabilitiesV23CC OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.23CC"
|
|
::= { mdmLineCapabilities 4 }
|
|
|
|
mdmLineCapabilitiesV23SC OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.23SC"
|
|
::= { mdmLineCapabilities 5 }
|
|
|
|
mdmLineCapabilitiesV25bis OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.25bis"
|
|
::= { mdmLineCapabilities 6 }
|
|
|
|
mdmLineCapabilitiesV26bis OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.26bis"
|
|
::= { mdmLineCapabilities 7 }
|
|
|
|
mdmLineCapabilitiesV26ter OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.26ter"
|
|
::= { mdmLineCapabilities 8 }
|
|
|
|
mdmLineCapabilitiesV27ter OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.27ter"
|
|
::= { mdmLineCapabilities 9 }
|
|
|
|
mdmLineCapabilitiesV32 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.32"
|
|
::= { mdmLineCapabilities 10 }
|
|
|
|
mdmLineCapabilitiesV32bis OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.32bis"
|
|
::= { mdmLineCapabilities 11 }
|
|
|
|
mdmLineCapabilitiesV32terbo OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.32terbo"
|
|
::= { mdmLineCapabilities 12 }
|
|
|
|
mdmLineCapabilitiesVFC OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.FC"
|
|
::= { mdmLineCapabilities 13 }
|
|
|
|
mdmLineCapabilitiesV34 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.34"
|
|
::= { mdmLineCapabilities 14 }
|
|
|
|
mdmLineCapabilitiesV42 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.42"
|
|
::= { mdmLineCapabilities 15 }
|
|
|
|
mdmLineCapabilitiesV42bis OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.42bis"
|
|
::= { mdmLineCapabilities 16 }
|
|
|
|
mdmLineCapabilitiesMNP1 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MNP1"
|
|
::= { mdmLineCapabilities 17 }
|
|
|
|
mdmLineCapabilitiesMNP2 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MNP2"
|
|
::= { mdmLineCapabilities 18 }
|
|
|
|
mdmLineCapabilitiesMNP3 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MNP3"
|
|
::= { mdmLineCapabilities 19 }
|
|
|
|
mdmLineCapabilitiesMNP4 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MNP4"
|
|
::= { mdmLineCapabilities 20 }
|
|
|
|
mdmLineCapabilitiesMNP5 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MNP5"
|
|
::= { mdmLineCapabilities 21 }
|
|
|
|
mdmLineCapabilitiesMNP6 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MNP6"
|
|
::= { mdmLineCapabilities 22 }
|
|
|
|
mdmLineCapabilitiesMNP7 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MNP7"
|
|
::= { mdmLineCapabilities 23 }
|
|
|
|
mdmLineCapabilitiesMNP8 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MNP8"
|
|
::= { mdmLineCapabilities 24 }
|
|
|
|
mdmLineCapabilitiesMNP9 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MNP9"
|
|
::= { mdmLineCapabilities 25 }
|
|
|
|
mdmLineCapabilitiesMNP10 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MNP10"
|
|
::= { mdmLineCapabilities 26 }
|
|
|
|
mdmLineCapabilitiesV29 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.29"
|
|
::= { mdmLineCapabilities 27 }
|
|
|
|
mdmLineCapabilitiesV33 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ITU V.33"
|
|
::= { mdmLineCapabilities 28 }
|
|
|
|
mdmLineCapabilitiesBell208 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bell 208"
|
|
::= { mdmLineCapabilities 29 }
|
|
|
|
-- DTE Interface Table
|
|
|
|
mdmDTEInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MdmDTEInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modem DTE Interface Table augments the modem ID table."
|
|
::= { mdmMIBObjects 6 }
|
|
|
|
mdmDTEInterfaceEntry OBJECT-TYPE
|
|
SYNTAX MdmDTEInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries in this table are created only by the agent. One
|
|
entry exists for each modem managed by the agent."
|
|
AUGMENTS { mdmIDEntry }
|
|
::= { mdmDTEInterfaceTable 1 }
|
|
|
|
MdmDTEInterfaceEntry ::= SEQUENCE {
|
|
mdmDTEActionDTROnToOff INTEGER,
|
|
mdmDTEActionDTROffToOn INTEGER,
|
|
mdmDTESyncTimingSource INTEGER,
|
|
mdmDTESyncAsyncMode INTEGER,
|
|
mdmDTEInactivityTimeout Integer32
|
|
}
|
|
|
|
mdmDTEActionDTROnToOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ignore(1),
|
|
escapeToCommandMode(2),
|
|
disconnectCall(3),
|
|
resetModem(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the action the modem will take when DTR drops.
|
|
|
|
If the value is set to ignore(1), the modem takes no action
|
|
when DTR drops. Typically, mdmDTEActionDTROffToOn would
|
|
also be set to ignore(1) if this object is set to ignore(1).
|
|
|
|
If the value is escapeToCommandMode(2), the modem remains
|
|
|
|
connected and enters command mode. If the value is
|
|
disconnectCall(3), the current call (if any) is terminated
|
|
and the modem will not auto-answer while DTR is off. If the
|
|
value is resetModem(4), the current call (if any) is
|
|
terminated and the modem is reset."
|
|
DEFVAL { disconnectCall }
|
|
::= { mdmDTEInterfaceEntry 1 }
|
|
|
|
mdmDTEActionDTROffToOn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ignore(1),
|
|
enableDial(2),
|
|
autoAnswerEnable(3),
|
|
establishConnection(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the action the modem will take when DTR is raised.
|
|
|
|
If the value is set to ignore(1), the modem takes no action
|
|
when DTR is raised. Typically, mdmDTEActionDTROnToOff would
|
|
also be set to ignore(1) if this object is set to ignore(1).
|
|
|
|
If the value is set to enableDial(2), the modem prepares to
|
|
dial an outgoing call. If the value is set to
|
|
autoAnswerEnable(3), the modem will be configured to answer
|
|
any incoming call. If the value is set to
|
|
establishConnection(4), the modem dials an implementation
|
|
specific number.
|
|
|
|
Immediately after any reset or power-on of the modem, if the
|
|
DTR is high, the action specified here will be executed."
|
|
DEFVAL { autoAnswerEnable }
|
|
::= { mdmDTEInterfaceEntry 2 }
|
|
|
|
mdmDTESyncTimingSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal(1),
|
|
external(2),
|
|
loopback(3),
|
|
network(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock source for synchronous transmissions. If set to
|
|
internal(1), the modem is the clock source and sends the
|
|
|
|
clock signals to the DTE. If set to external(2), the
|
|
transmit clock signals are provided by the DTE. If
|
|
loopback(3), the modem receiver clock is used for the
|
|
transmit clock. If network(4), the clock signals are
|
|
supplied by the DCE interface.
|
|
|
|
If the modem is not in synchronous mode, setting this object
|
|
will have no effect on the current operations of the modem."
|
|
REFERENCE "V.58 transmitClockSource"
|
|
DEFVAL { internal }
|
|
::= { mdmDTEInterfaceEntry 3 }
|
|
|
|
mdmDTESyncAsyncMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
async(1),
|
|
sync(2),
|
|
syncAfterDial(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational mode of the modem. If the value is
|
|
syncAfterDial(3), the modem will accept commands in
|
|
asynchronous mode and change to synchronous mode to pass
|
|
data after a dial sequence has been executed."
|
|
DEFVAL { async }
|
|
::= { mdmDTEInterfaceEntry 4 }
|
|
|
|
mdmDTEInactivityTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of idle time in minutes that the modem will wait
|
|
before disconnecting a connection. When a call is connected
|
|
and no data is transferred (continuous marking condition) on
|
|
both circuits 103 and 104 for the specified time, the DCE
|
|
disconnects the call. If the value is 0, no idle disconnect
|
|
will occur. This function applies to asynchronous dial
|
|
operations only and is intended for administrative control
|
|
over idle connections."
|
|
REFERENCE "V.58 inactivityTimerSelect"
|
|
DEFVAL { 0 }
|
|
::= { mdmDTEInterfaceEntry 5 }
|
|
|
|
-- The Call Control Table
|
|
|
|
mdmCallControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MdmCallControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modem Call Control Table augments the modem ID table."
|
|
::= { mdmMIBObjects 7 }
|
|
|
|
mdmCallControlEntry OBJECT-TYPE
|
|
SYNTAX MdmCallControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries in this table are created only by the agent. One
|
|
entry exists for each modem managed by the agent."
|
|
AUGMENTS { mdmIDEntry }
|
|
::= { mdmCallControlTable 1 }
|
|
|
|
MdmCallControlEntry ::= SEQUENCE {
|
|
mdmCCRingsBeforeAnswer Integer32,
|
|
mdmCCCallSetUpFailTimer Integer32,
|
|
mdmCCResultCodeEnable INTEGER,
|
|
mdmCCEscapeAction INTEGER,
|
|
mdmCCCallDuration Integer32,
|
|
mdmCCConnectionFailReason INTEGER
|
|
}
|
|
|
|
mdmCCRingsBeforeAnswer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines which ring the modem will wait to answer the
|
|
phone on. If this value is `0', the modem will not go
|
|
offhook and answer a call when a ring signal is detected."
|
|
REFERENCE "V.58 ringsBeforeAnswer"
|
|
DEFVAL { 1 }
|
|
::= { mdmCallControlEntry 1 }
|
|
|
|
mdmCCCallSetUpFailTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the amount of time, in seconds,
|
|
that the modem shall allow between either answering a call
|
|
(automatically or manually) or completion of dialing, and
|
|
establishment of a connection with the remote modem. If no
|
|
|
|
connection is established during this time, the modem
|
|
disconnects from the line and returns a result code
|
|
indicating the cause of the disconnection. In TIA-602, this
|
|
is controlled by the value in the S7 register."
|
|
REFERENCE "V.58 callSetUpFailTimer"
|
|
DEFVAL { 30 }
|
|
::= { mdmCallControlEntry 2 }
|
|
|
|
mdmCCResultCodeEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
numericEnabled(2),
|
|
verboseEnabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When disabled, the DCE shall issue no 'result codes' of any
|
|
kind to the DTE either in response to unsolicited events
|
|
(eg. ring signal), or commands. In TIA-602, this is
|
|
controlled by the ATQ command. When numericEnabled, the DCE
|
|
shall issue result codes in numeric form. When
|
|
verboseEnabled, the DCE shall issue result codes in a
|
|
verbose, textual form."
|
|
REFERENCE "V.58 responseModeSelect"
|
|
DEFVAL { verboseEnabled }
|
|
::= { mdmCallControlEntry 3 }
|
|
|
|
mdmCCEscapeAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ignoreEscape(1),
|
|
hangUp(2),
|
|
enterCommandMode(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modem's action upon successfully recognizing the
|
|
'escape to command mode' character sequence."
|
|
DEFVAL { ignoreEscape }
|
|
::= { mdmCallControlEntry 4 }
|
|
|
|
-- Call status portion of the call control table
|
|
|
|
mdmCCCallDuration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Present or last completed connection time in seconds. If
|
|
there have been no previous connections, this value should
|
|
be -1."
|
|
::= { mdmCallControlEntry 5 }
|
|
|
|
mdmCCConnectionFailReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- General
|
|
unknown(1),
|
|
other(2),
|
|
managementCommand(3),
|
|
inactivityTimeout(4),
|
|
mnpIncompatibility(5),
|
|
protocolError(6),
|
|
-- DCE
|
|
powerLoss(10),
|
|
equipmentFailure(11),
|
|
-- DTE Interface
|
|
dtrDrop(20),
|
|
-- Line Interface
|
|
noDialTone(30),
|
|
lineBusy(31),
|
|
noAnswer(32),
|
|
voiceDetected(33),
|
|
-- Signal Converter
|
|
carrierLost(40),
|
|
trainingFailed(41),
|
|
faxDetected(42)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the reason that the last connection or attempt
|
|
failed. The meaning of each reason code is explained below.
|
|
|
|
unknown:
|
|
This code means the failure reason is unknown or
|
|
there has been no previous call.
|
|
|
|
other:
|
|
This code used when no other code is applicable.
|
|
Additional vendor information may be available
|
|
elsewhere.
|
|
|
|
managementCommand:
|
|
|
|
A management command terminated the call. These
|
|
commands include escaping to command mode, initiating
|
|
dialing, restoring lines, and disconnecting.
|
|
|
|
inactivityTimeout:
|
|
The call was terminated because it was inactive for
|
|
at the minimum duration specified.
|
|
|
|
mnpIncompatibility:
|
|
The modems are unable to resolve MNP protocol
|
|
differences.
|
|
|
|
protocolError:
|
|
An error occured in one of protocol in use. Further
|
|
information is required to determine in which
|
|
protocol the error occurred, and the exact nature of
|
|
the error.
|
|
|
|
powerLoss:
|
|
The modem lost power and disconnected the call.
|
|
|
|
equipmentFailure:
|
|
The modem equipment failed.
|
|
|
|
dtrDrop:
|
|
DTR has been turned off while the modem is to
|
|
disconnect on DTR drop. (Ref: V.58 cct108TurnedOff)
|
|
|
|
noDialTone:
|
|
If the modem is to monitor for call progress tones,
|
|
but the modem has failed to detect dial tone while
|
|
attempting to dial a number.
|
|
|
|
lineBusy:
|
|
Busy signal is detected while busy signal detection
|
|
is enabled, or while the 'W' or '@' dial modifier is
|
|
used. (Ref: V.58 engagedTone)
|
|
|
|
noAnswer:
|
|
The call was not answered.
|
|
|
|
voiceDetected:
|
|
A voice was detected on the call.
|
|
|
|
carrierLost:
|
|
Indicates that the modem has disconnected due to
|
|
detection of loss of carrier. In TIA-602, the S10
|
|
register determines the time that loss of carrier
|
|
|
|
must be detected before the modem disconnects.
|
|
|
|
trainingFailed:
|
|
Indicates that the modems did not successfully train
|
|
and reach data mode on the previous connection.
|
|
|
|
faxDetected:
|
|
A fax was detected on the call."
|
|
REFERENCE "V.58 callCleared"
|
|
::= { mdmCallControlEntry 6 }
|
|
|
|
-- The Stored Dial String table
|
|
|
|
mdmCCStoredDialStringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MdmCCStoredDialStringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of stored dial strings."
|
|
REFERENCE "V.58 telephoneNumbers"
|
|
::= { mdmMIBObjects 8 }
|
|
|
|
mdmCCStoredDialStringEntry OBJECT-TYPE
|
|
SYNTAX MdmCCStoredDialStringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A stored dial string."
|
|
INDEX { mdmIndex, mdmCCStoredDialStringIndex }
|
|
::= { mdmCCStoredDialStringTable 1 }
|
|
|
|
MdmCCStoredDialStringEntry ::= SEQUENCE {
|
|
mdmCCStoredDialStringIndex Integer32,
|
|
mdmCCStoredDialString DisplayString
|
|
}
|
|
|
|
mdmCCStoredDialStringIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique index of a particular dial string."
|
|
::= { mdmCCStoredDialStringEntry 1 }
|
|
|
|
mdmCCStoredDialString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A dial string stored in the modem."
|
|
::= { mdmCCStoredDialStringEntry 2 }
|
|
|
|
-- The modem Error Correcting Group
|
|
|
|
mdmECTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MdmECEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modem error correcting table augments the modem ID
|
|
table."
|
|
::= { mdmMIBObjects 9 }
|
|
|
|
mdmECEntry OBJECT-TYPE
|
|
SYNTAX MdmECEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries in this table are created only by the agent. One
|
|
entry exists for each modem managed by the agent."
|
|
AUGMENTS { mdmIDEntry }
|
|
::= { mdmECTable 1 }
|
|
|
|
MdmECEntry ::= SEQUENCE {
|
|
mdmECErrorControlUsed OBJECT IDENTIFIER
|
|
}
|
|
|
|
mdmECErrorControlUsed OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the error control method used during the current
|
|
or previous call. This shall be one of the values for error
|
|
control protocols registered in the capabilities table for
|
|
this modem. If no error control protocol is in use, this
|
|
object shall have the value '{0 0}'."
|
|
REFERENCE "V.58 errorControlActive"
|
|
::= { mdmECEntry 1 }
|
|
|
|
-- The modem Data Compression Group
|
|
|
|
mdmDCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MdmDCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modem data compression table augments the modem ID
|
|
table."
|
|
::= { mdmMIBObjects 10 }
|
|
|
|
mdmDCEntry OBJECT-TYPE
|
|
SYNTAX MdmDCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries in this table are created only by the agent. One
|
|
entry exists for each modem managed by the agent."
|
|
AUGMENTS { mdmIDEntry }
|
|
::= { mdmDCTable 1 }
|
|
|
|
MdmDCEntry ::= SEQUENCE {
|
|
mdmDCCompressionTypeUsed OBJECT IDENTIFIER
|
|
}
|
|
|
|
mdmDCCompressionTypeUsed OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the data compression method used during the
|
|
current or previous call. This shall be one of the values
|
|
for compression protocols registered in the capabilities
|
|
table for this modem. If no compression protocol is in use,
|
|
this object shall have the value '{0 0}'."
|
|
::= { mdmDCEntry 1 }
|
|
|
|
-- The modem Signal Convertor Group
|
|
|
|
mdmSCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MdmSCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modem signal convertor table augments the modem ID
|
|
table."
|
|
::= { mdmMIBObjects 11 }
|
|
|
|
mdmSCEntry OBJECT-TYPE
|
|
SYNTAX MdmSCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries in this table are created only by the agent. One
|
|
|
|
entry exists for each modem managed by the agent."
|
|
AUGMENTS { mdmIDEntry }
|
|
::= { mdmSCTable 1 }
|
|
|
|
MdmSCEntry ::= SEQUENCE {
|
|
mdmSCCurrentLineTransmitRate Integer32,
|
|
mdmSCCurrentLineReceiveRate Integer32,
|
|
mdmSCInitialLineTransmitRate Integer32,
|
|
mdmSCInitialLineReceiveRate Integer32,
|
|
mdmSCModulationSchemeUsed OBJECT IDENTIFIER
|
|
}
|
|
|
|
mdmSCCurrentLineTransmitRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current link transmit rate of a connection, or the last
|
|
link transmit rate of the last connection in bits per
|
|
second."
|
|
REFERENCE "V.58 transmissionSignallingRateActive"
|
|
::= { mdmSCEntry 1 }
|
|
|
|
mdmSCCurrentLineReceiveRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current link receive rate of a connection, or the last
|
|
link receive rate of the last connection in bits per
|
|
second."
|
|
REFERENCE "V.58 transmissionSignallingRateActive"
|
|
::= { mdmSCEntry 2 }
|
|
|
|
mdmSCInitialLineTransmitRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The initial link transmit rate of the current connection,
|
|
or the initial link transmit rate of the last connection in
|
|
bits per second."
|
|
::= { mdmSCEntry 3 }
|
|
|
|
mdmSCInitialLineReceiveRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The initial link receive rate of the current connection, or
|
|
the initial link receive rate of the last connection in bits
|
|
per second."
|
|
::= { mdmSCEntry 4 }
|
|
|
|
mdmSCModulationSchemeUsed OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modulation scheme of the current or previous call.
|
|
This shall be one of the values for modulation protocols
|
|
registered in the capabilities table for this modem."
|
|
REFERENCE "V.58 gstnModulationSchemeActive"
|
|
::= { mdmSCEntry 5 }
|
|
|
|
-- The Modem Statistics Table
|
|
|
|
mdmStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MdmStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modem statistics Table augments the modem ID table."
|
|
::= { mdmMIBObjects 12 }
|
|
|
|
mdmStatsEntry OBJECT-TYPE
|
|
SYNTAX MdmStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries in this table are created only by the agent. One
|
|
entry exists for each modem managed by the agent."
|
|
AUGMENTS { mdmIDEntry }
|
|
::= { mdmStatsTable 1 }
|
|
|
|
MdmStatsEntry ::= SEQUENCE {
|
|
mdmStatsRingNoAnswers Counter32,
|
|
mdmStatsIncomingConnectionFailures Counter32,
|
|
mdmStatsIncomingConnectionCompletions Counter32,
|
|
mdmStatsFailedDialAttempts Counter32,
|
|
mdmStatsOutgoingConnectionFailures Counter32,
|
|
mdmStatsOutgoingConnectionCompletions Counter32,
|
|
mdmStatsRetrains Counter32,
|
|
mdmStats2400OrLessConnections Counter32,
|
|
mdmStats2400To14400Connections Counter32,
|
|
mdmStatsGreaterThan14400Connections Counter32,
|
|
mdmStatsErrorControlledConnections Counter32,
|
|
mdmStatsCompressedConnections Counter32,
|
|
mdmStatsCompressionEfficiency Integer32,
|
|
mdmStatsSentOctets Counter32,
|
|
mdmStatsReceivedOctets Counter32,
|
|
mdmStatsSentDataFrames Counter32,
|
|
mdmStatsReceivedDataFrames Counter32,
|
|
mdmStatsResentFrames Counter32,
|
|
mdmStatsErrorFrames Counter32
|
|
}
|
|
|
|
mdmStatsRingNoAnswers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of events in which ringing was detected but the
|
|
call was not answered."
|
|
::= { mdmStatsEntry 1 }
|
|
|
|
mdmStatsIncomingConnectionFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of incoming connection requests that this modem
|
|
answered in which it could not train with the other DCE."
|
|
::= { mdmStatsEntry 2 }
|
|
|
|
mdmStatsIncomingConnectionCompletions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of incoming connection requests that this modem
|
|
answered and successfully trained with the other DCE."
|
|
::= { mdmStatsEntry 3 }
|
|
|
|
mdmStatsFailedDialAttempts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of call attempts that failed because the modem
|
|
didn't go off hook, or there was no dialtone."
|
|
::= { mdmStatsEntry 4 }
|
|
|
|
mdmStatsOutgoingConnectionFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outgoing calls from this modem which
|
|
sucessfully went off hook and dialed, in which it could not
|
|
train with the other DCE."
|
|
::= { mdmStatsEntry 5 }
|
|
|
|
mdmStatsOutgoingConnectionCompletions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outgoing calls from this modem which resulted
|
|
in successfully training with the other DCE."
|
|
::= { mdmStatsEntry 6 }
|
|
|
|
mdmStatsRetrains OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of retrains experienced on connections on this
|
|
line."
|
|
::= { mdmStatsEntry 7 }
|
|
|
|
-- Utilization counters
|
|
|
|
mdmStats2400OrLessConnections OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of connections initially established at a
|
|
modulation speed of 2400 bits per second or less."
|
|
::= { mdmStatsEntry 8 }
|
|
|
|
mdmStats2400To14400Connections OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of connections initially established at a
|
|
modulation speed of greater than 2400 bits per second and
|
|
less than 14400 bits per second."
|
|
::= { mdmStatsEntry 9 }
|
|
|
|
mdmStatsGreaterThan14400Connections OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of connections initially established at a
|
|
modulation speed of greater than 14400 bits per second."
|
|
::= { mdmStatsEntry 10 }
|
|
|
|
mdmStatsErrorControlledConnections OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of established connections using an error
|
|
control protocol."
|
|
::= { mdmStatsEntry 11 }
|
|
|
|
mdmStatsCompressedConnections OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of established connections using a compression
|
|
protocol."
|
|
::= { mdmStatsEntry 12 }
|
|
|
|
mdmStatsCompressionEfficiency OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes transferred into the compression
|
|
encoder divided by the number of bytes transferred out of
|
|
the encoder, multiplied by 100 for either the current or
|
|
last call. If a data compression protocol is not in use,
|
|
this value shall be `100'."
|
|
REFERENCE "V.58 compressionEfficiency"
|
|
::= { mdmStatsEntry 13 }
|
|
|
|
mdmStatsSentOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of octets presented to the modem by the DTE."
|
|
::= { mdmStatsEntry 14 }
|
|
|
|
mdmStatsReceivedOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of octets presented to the DTE by the modem."
|
|
::= { mdmStatsEntry 15 }
|
|
|
|
mdmStatsSentDataFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of data frames sent on the line interface. If
|
|
there is no frame-oriented protocol in use on the line
|
|
interface, this counter shall not increment."
|
|
::= { mdmStatsEntry 16 }
|
|
|
|
mdmStatsReceivedDataFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of data frames received on the line interface.
|
|
If there is no frame-oriented protocol in use on the line
|
|
interface, this counter shall not increment."
|
|
::= { mdmStatsEntry 17 }
|
|
|
|
mdmStatsResentFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this modem retransmits frames on the
|
|
line interface. If there is no frame-oriented protocol in
|
|
use on the line interface, this counter shall not
|
|
increment."
|
|
::= { mdmStatsEntry 18 }
|
|
|
|
mdmStatsErrorFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of block errors received on the link. If there
|
|
is no frame-oriented protocol in use on the line interface,
|
|
this counter shall not increment."
|
|
::= { mdmStatsEntry 19 }
|
|
|
|
-- compliance statements
|
|
|
|
mdmCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMPv2 entities which
|
|
implement the modem MIB."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mdmIDGroup, mdmLineInterfaceGroup,
|
|
mdmDTEInterfaceGroup, mdmCallControlGroup,
|
|
mdmSignalConvertorGroup, mdmStatisticsGroup }
|
|
|
|
GROUP mdmErrorControlGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for those modems that
|
|
implement an error correction protocol."
|
|
|
|
GROUP mdmDataCompressionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for those modems that
|
|
implement a data compression protocol."
|
|
::= { mdmCompliances 1 }
|
|
|
|
END
|