825 lines
29 KiB
Plaintext
825 lines
29 KiB
Plaintext
MPLS-TE-EXT-STD-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE
|
|
FROM SNMPv2-SMI -- RFC 2578
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF -- RFC 2580
|
|
TruthValue, RowStatus, RowPointer, StorageType
|
|
FROM SNMPv2-TC -- RFC 2579
|
|
IndexIntegerNextFree
|
|
FROM DIFFSERV-MIB -- RFC 3289
|
|
MplsGlobalId, MplsNodeId, MplsCcId, MplsIccId
|
|
FROM MPLS-TC-EXT-STD-MIB
|
|
mplsStdMIB, MplsTunnelIndex, MplsTunnelInstanceIndex,
|
|
MplsExtendedTunnelId
|
|
FROM MPLS-TC-STD-MIB -- RFC 3811
|
|
mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId,
|
|
mplsTunnelEgressLSRId
|
|
|
|
FROM MPLS-TE-STD-MIB -- RFC 3812
|
|
;
|
|
|
|
mplsTeExtStdMIB MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"201502020000Z" -- February 2, 2015
|
|
ORGANIZATION
|
|
"Multiprotocol Label Switching (MPLS) Working Group"
|
|
CONTACT-INFO
|
|
"
|
|
Venkatesan Mahalingam
|
|
Dell Inc,
|
|
5450 Great America Parkway,
|
|
Santa Clara, CA 95054, USA
|
|
Email: venkat.mahalingams@gmail.com
|
|
|
|
Kannan KV Sampath
|
|
Redeem,
|
|
India
|
|
Email: kannankvs@gmail.com
|
|
|
|
Sam Aldrin
|
|
Huawei Technologies
|
|
2330 Central Express Way,
|
|
Santa Clara, CA 95051, USA
|
|
Email: aldrin.ietf@gmail.com
|
|
|
|
Thomas D. Nadeau
|
|
Email: tnadeau@lucidvision.com
|
|
"
|
|
DESCRIPTION
|
|
"This MIB module contains generic object definitions for
|
|
extending the MPLS Traffic Engineering tunnels in transport
|
|
networks.
|
|
|
|
Copyright (c) 2015 IETF Trust and the persons identified as
|
|
authors of the code. All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or
|
|
without modification, is permitted pursuant to, and subject to
|
|
the license terms contained in, the Simplified BSD License set
|
|
forth in Section 4.c of the IETF Trust's Legal Provisions
|
|
Relating to IETF Documents
|
|
(http://trustee.ietf.org/license-info)."
|
|
|
|
-- Revision history.
|
|
|
|
REVISION
|
|
"201502020000Z" -- February 2, 2015
|
|
DESCRIPTION
|
|
"MPLS TE MIB objects extension"
|
|
::= { mplsStdMIB 20 }
|
|
|
|
-- Top-level components of this MIB module.
|
|
|
|
-- tables, scalars
|
|
mplsTeExtObjects OBJECT IDENTIFIER
|
|
::= { mplsTeExtStdMIB 0 }
|
|
-- conformance
|
|
mplsTeExtConformance OBJECT IDENTIFIER
|
|
::= { mplsTeExtStdMIB 1 }
|
|
|
|
-- Start of MPLS Transport Profile Node configuration table
|
|
|
|
mplsTunnelExtNodeConfigLocalIdNext OBJECT-TYPE
|
|
SYNTAX IndexIntegerNextFree (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an unused value for
|
|
mplsTunnelExtNodeConfigLocalId, or a zero to indicate
|
|
that none exist. Negative values are not allowed,
|
|
as they do not correspond to valid values of
|
|
mplsTunnelExtNodeConfigLocalId."
|
|
::= { mplsTeExtObjects 1 }
|
|
|
|
mplsTunnelExtNodeConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsTunnelExtNodeConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table allows the operator to map a node or
|
|
LSR identifier (IP-compatible [Global_ID::Node_ID] or
|
|
ICC-based [ICC_Operator_ID::Node_ID]) with a local
|
|
identifier.
|
|
|
|
This table is created to reuse the existing
|
|
mplsTunnelTable for MPLS-based transport network
|
|
tunnels also.
|
|
|
|
Since the MPLS tunnel's Ingress/Egress LSR identifiers'
|
|
size (Unsigned32) value is not compatible for
|
|
MPLS-TP Tunnel, i.e., Global_ID::Node_ID of size 8 bytes and
|
|
ICC_Operator_ID::Node_ID of size 12 bytes, there exists a
|
|
need to map the Global_ID::Node_ID or ICC_Operator_ID::Node_ID
|
|
with the local identifier of size 4 bytes (Unsigned32) value
|
|
in order to index (Ingress/Egress LSR identifier)
|
|
the existing mplsTunnelTable."
|
|
::= { mplsTeExtObjects 2 }
|
|
|
|
mplsTunnelExtNodeConfigEntry OBJECT-TYPE
|
|
SYNTAX MplsTunnelExtNodeConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents a mapping
|
|
identification for the operator or service provider
|
|
to a node or an LSR.
|
|
|
|
As per RFC 6370, IP-compatible mapping is represented
|
|
as Global_ID::Node_ID.
|
|
|
|
As per RFC 6923, the CC and the ICC form the ICC_Operator_ID
|
|
as CC::ICC, and ICC-compatible mapping is represented
|
|
as ICC_Operator_ID::Node_ID.
|
|
|
|
Note: Each entry in this table should have a unique
|
|
[Global_ID and Node_ID] or [CC::ICC and Node_ID] combination."
|
|
INDEX { mplsTunnelExtNodeConfigLocalId }
|
|
::= { mplsTunnelExtNodeConfigTable 1 }
|
|
|
|
MplsTunnelExtNodeConfigEntry ::= SEQUENCE {
|
|
mplsTunnelExtNodeConfigLocalId MplsExtendedTunnelId,
|
|
mplsTunnelExtNodeConfigGlobalId MplsGlobalId,
|
|
mplsTunnelExtNodeConfigCcId MplsCcId,
|
|
mplsTunnelExtNodeConfigIccId MplsIccId,
|
|
mplsTunnelExtNodeConfigNodeId MplsNodeId,
|
|
mplsTunnelExtNodeConfigIccValid TruthValue,
|
|
mplsTunnelExtNodeConfigStorageType StorageType,
|
|
mplsTunnelExtNodeConfigRowStatus RowStatus
|
|
|
|
}
|
|
|
|
mplsTunnelExtNodeConfigLocalId OBJECT-TYPE
|
|
SYNTAX MplsExtendedTunnelId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used in accommodating the bigger-
|
|
size Global_ID::Node_ID and/or the ICC_Operator_ID::Node_ID
|
|
with the smaller-size LSR identifier in order to index
|
|
the mplsTunnelTable.
|
|
|
|
The local identifier is configured between 0 and 16777215,
|
|
as the valid IP address range starts from
|
|
16777216(01.00.00.00).
|
|
This range is chosen to determine whether the
|
|
mplsTunnelTable's Ingress/Egress LSR ID is an IP address or
|
|
local identifier. If the configured range is not an
|
|
IP address, the operator is expected to retrieve the
|
|
complete information (Global_ID::Node_ID or
|
|
ICC_Operator_ID::Node_ID) from mplsTunnelExtNodeConfigTable.
|
|
This way, the existing mplsTunnelTable is reused for
|
|
bidirectional tunnel extensions for MPLS-based transport
|
|
networks.
|
|
|
|
The local identifier allows the operator to assign
|
|
a unique identifier to map Global_ID::Node_ID and/or
|
|
ICC_Operator_ID::Node_ID. As this local identifier is unique
|
|
within the node and the same syntax of this object can be
|
|
used for MPLS-TE tunnel also, it is up to the operator/local
|
|
management entity to choose a non-conflicting value for
|
|
indexing the MPLS and MPLS-TP tunnel entries."
|
|
::= { mplsTunnelExtNodeConfigEntry 1 }
|
|
|
|
mplsTunnelExtNodeConfigGlobalId OBJECT-TYPE
|
|
SYNTAX MplsGlobalId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Global Operator Identifier.
|
|
This object has no meaning when
|
|
mplsTunnelExtNodeConfigIccValid is set true."
|
|
REFERENCE
|
|
"MPLS Transport Profile (MPLS-TP) Identifiers, RFC 6370,
|
|
Section 3."
|
|
::= { mplsTunnelExtNodeConfigEntry 2 }
|
|
|
|
mplsTunnelExtNodeConfigCcId OBJECT-TYPE
|
|
SYNTAX MplsCcId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows the operator or service provider to
|
|
configure a unique MPLS-TP ITU-T Country Code (CC)
|
|
either for Ingress ID or Egress ID.
|
|
|
|
This object has no meaning when
|
|
mplsTunnelExtNodeConfigIccValid is set to false."
|
|
REFERENCE
|
|
"MPLS-TP Identifiers Following ITU-T Conventions,
|
|
RFC 6923, Section 3"
|
|
::= { mplsTunnelExtNodeConfigEntry 3 }
|
|
|
|
mplsTunnelExtNodeConfigIccId OBJECT-TYPE
|
|
SYNTAX MplsIccId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows the operator or service provider to
|
|
configure a unique MPLS-TP ITU-T Carrier Code (ICC)
|
|
either for Ingress ID or Egress ID.
|
|
|
|
This object has no meaning when
|
|
mplsTunnelExtNodeConfigIccValid is set to false."
|
|
REFERENCE
|
|
"MPLS-TP Identifiers Following ITU-T Conventions,
|
|
RFC 6923, Section 3"
|
|
::= { mplsTunnelExtNodeConfigEntry 4 }
|
|
|
|
mplsTunnelExtNodeConfigNodeId OBJECT-TYPE
|
|
SYNTAX MplsNodeId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Node_ID within the scope
|
|
of a Global_ID or ICC_Operator_ID."
|
|
REFERENCE
|
|
"MPLS Transport Profile (MPLS-TP) Identifiers, RFC 6370,
|
|
Section 4."
|
|
::= { mplsTunnelExtNodeConfigEntry 5 }
|
|
|
|
mplsTunnelExtNodeConfigIccValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether or not this entry uses
|
|
mplsTunnelExtNodeConfigCcId,
|
|
mplsTunnelExtNodeConfigIccId, and
|
|
|
|
mplsTunnelExtNodeConfigNodeId for mapping
|
|
the ICC-based identifiers with the local identifier.
|
|
Note that if this variable is set to false, then the
|
|
mplsTunnelExtNodeConfigGlobalId and
|
|
mplsTunnelExtNodeConfigNodeId objects should have
|
|
the valid information."
|
|
DEFVAL { false }
|
|
::= { mplsTunnelExtNodeConfigEntry 6 }
|
|
|
|
mplsTunnelExtNodeConfigStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this
|
|
object.
|
|
Conceptual rows having the value 'permanent'
|
|
need not allow write-access to any columnar
|
|
objects in the row."
|
|
DEFVAL { volatile }
|
|
::= { mplsTunnelExtNodeConfigEntry 7 }
|
|
|
|
mplsTunnelExtNodeConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows the operator to create, modify,
|
|
and/or delete a row in this table."
|
|
::= { mplsTunnelExtNodeConfigEntry 8 }
|
|
|
|
-- End of MPLS Transport Profile Node configuration table
|
|
|
|
-- Start of MPLS Transport Profile Node IP-compatible
|
|
-- mapping table
|
|
|
|
mplsTunnelExtNodeIpMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsTunnelExtNodeIpMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only table allows the operator to retrieve
|
|
the local identifier for a given Global_ID::Node_ID in an
|
|
IP-compatible operator environment.
|
|
This table MAY be used in on-demand and/or proactive
|
|
OAM operations to get the Ingress/Egress LSR identifier
|
|
|
|
(local identifier) from Src-Global_Node_ID
|
|
or Dst-Global_Node_ID. The Ingress and Egress LSR
|
|
identifiers are used to retrieve the tunnel entry.
|
|
|
|
This table returns nothing when the associated entry
|
|
is not defined in mplsTunnelExtNodeConfigTable."
|
|
::= { mplsTeExtObjects 3 }
|
|
|
|
mplsTunnelExtNodeIpMapEntry OBJECT-TYPE
|
|
SYNTAX MplsTunnelExtNodeIpMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents a mapping of
|
|
Global_ID::Node_ID with the local identifier.
|
|
|
|
An entry in this table is created automatically when
|
|
the local identifier is associated with Global_ID and
|
|
Node_Id in the mplsTunnelExtNodeConfigTable.
|
|
|
|
Note: Each entry in this table should have a unique
|
|
Global_ID and Node_ID combination."
|
|
INDEX { mplsTunnelExtNodeIpMapGlobalId,
|
|
mplsTunnelExtNodeIpMapNodeId
|
|
}
|
|
::= { mplsTunnelExtNodeIpMapTable 1 }
|
|
|
|
MplsTunnelExtNodeIpMapEntry ::= SEQUENCE {
|
|
mplsTunnelExtNodeIpMapGlobalId MplsGlobalId,
|
|
mplsTunnelExtNodeIpMapNodeId MplsNodeId,
|
|
mplsTunnelExtNodeIpMapLocalId MplsExtendedTunnelId
|
|
}
|
|
|
|
mplsTunnelExtNodeIpMapGlobalId OBJECT-TYPE
|
|
SYNTAX MplsGlobalId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Global_ID."
|
|
::= { mplsTunnelExtNodeIpMapEntry 1 }
|
|
|
|
mplsTunnelExtNodeIpMapNodeId OBJECT-TYPE
|
|
SYNTAX MplsNodeId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Node_ID within the
|
|
operator."
|
|
::= { mplsTunnelExtNodeIpMapEntry 2 }
|
|
|
|
mplsTunnelExtNodeIpMapLocalId OBJECT-TYPE
|
|
SYNTAX MplsExtendedTunnelId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an IP-compatible local identifier
|
|
that is defined in mplsTunnelExtNodeConfigTable."
|
|
::= { mplsTunnelExtNodeIpMapEntry 3 }
|
|
|
|
-- End MPLS Transport Profile Node IP compatible table
|
|
|
|
-- Start of MPLS Transport Profile Node ICC based table
|
|
|
|
mplsTunnelExtNodeIccMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsTunnelExtNodeIccMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only table allows the operator to retrieve
|
|
the local identifier for a given ICC_Operator_ID::Node_ID
|
|
in an ICC operator environment.
|
|
|
|
This table MAY be used in on-demand and/or proactive
|
|
OAM operations to get the Ingress/Egress LSR
|
|
identifier (local identifier) from Src-ICC
|
|
or Dst-ICC. The Ingress and Egress LSR
|
|
identifiers are used to retrieve the tunnel entry.
|
|
This table returns nothing when the associated entry
|
|
is not defined in mplsTunnelExtNodeConfigTable."
|
|
::= { mplsTeExtObjects 4 }
|
|
|
|
mplsTunnelExtNodeIccMapEntry OBJECT-TYPE
|
|
SYNTAX MplsTunnelExtNodeIccMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents a mapping of
|
|
ICC_Operator_ID::Node_ID with the local identifier.
|
|
|
|
An entry in this table is created automatically when
|
|
the local identifier is associated with
|
|
ICC_Operator_ID::Node_ID in
|
|
the mplsTunnelExtNodeConfigTable."
|
|
INDEX { mplsTunnelExtNodeIccMapCcId,
|
|
mplsTunnelExtNodeIccMapIccId,
|
|
mplsTunnelExtNodeIccMapNodeId }
|
|
::= { mplsTunnelExtNodeIccMapTable 1 }
|
|
|
|
MplsTunnelExtNodeIccMapEntry ::= SEQUENCE {
|
|
mplsTunnelExtNodeIccMapCcId MplsCcId,
|
|
mplsTunnelExtNodeIccMapIccId MplsIccId,
|
|
mplsTunnelExtNodeIccMapNodeId MplsNodeId,
|
|
mplsTunnelExtNodeIccMapLocalId MplsExtendedTunnelId
|
|
}
|
|
|
|
mplsTunnelExtNodeIccMapCcId OBJECT-TYPE
|
|
SYNTAX MplsCcId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows the operator or service provider to
|
|
configure a unique MPLS-TP ITU-T Country Code (CC)
|
|
either for Ingress or Egress LSR ID.
|
|
|
|
The CC is a string of two alphabetic characters
|
|
represented with uppercase letters (i.e., A-Z)."
|
|
::= { mplsTunnelExtNodeIccMapEntry 1 }
|
|
|
|
mplsTunnelExtNodeIccMapIccId OBJECT-TYPE
|
|
SYNTAX MplsIccId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows the operator or service provider
|
|
to configure a unique MPLS-TP ITU-T Carrier
|
|
Code (ICC) either for Ingress or Egress LSR ID.
|
|
|
|
The ICC is a string of one to six characters, each
|
|
character being either alphabetic (i.e., A-Z) or
|
|
numeric (i.e., 0-9) characters. Alphabetic characters
|
|
in the ICC should be represented with uppercase
|
|
letters."
|
|
::= { mplsTunnelExtNodeIccMapEntry 2 }
|
|
|
|
mplsTunnelExtNodeIccMapNodeId OBJECT-TYPE
|
|
SYNTAX MplsNodeId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Node_ID within the
|
|
ICC-based operator."
|
|
::= { mplsTunnelExtNodeIccMapEntry 3}
|
|
|
|
mplsTunnelExtNodeIccMapLocalId OBJECT-TYPE
|
|
SYNTAX MplsExtendedTunnelId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an ICC-based local identifier
|
|
that is defined in mplsTunnelExtNodeConfigTable."
|
|
::= { mplsTunnelExtNodeIccMapEntry 4 }
|
|
|
|
-- End MPLS Transport Profile Node ICC-based table
|
|
|
|
-- Start of MPLS Tunnel table extension
|
|
|
|
mplsTunnelExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsTunnelExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents extensions to mplsTunnelTable
|
|
in order to support MPLS-TP Tunnels.
|
|
|
|
As per MPLS-TP Identifiers (RFC 6370), LSP_ID for IP-based
|
|
co-routed bidirectional tunnel:
|
|
|
|
A1-{Global_ID::Node_ID::Tunnel_Num}::Z9-{Global_ID::
|
|
Node_ID::Tunnel_Num}::LSP_Num
|
|
|
|
LSP_ID for IP based associated bidirectional tunnel:
|
|
A1-{Global_ID::Node_ID::Tunnel_Num::LSP_Num}::
|
|
Z9-{Global_ID::Node_ID::Tunnel_Num::LSP_Num}
|
|
|
|
mplsTunnelTable is reused for forming the LSP_ID
|
|
as follows:
|
|
|
|
Source Tunnel_Num is mapped with mplsTunnelIndex,
|
|
Source Node_ID is mapped with
|
|
mplsTunnelIngressLSRId, Destination Node_ID is
|
|
mapped with mplsTunnelEgressLSRId, and LSP_Num is mapped with
|
|
mplsTunnelInstance.
|
|
|
|
Source Global_ID::Node_ID and/or ICC_Operator_ID::Node_ID and
|
|
Destination Global_ID::Node_ID and/or ICC_Operator_ID::Node-ID
|
|
are maintained in the mplsTunnelExtNodeConfigTable.
|
|
mplsTunnelExtNodeConfigLocalId is used to create an entry
|
|
in mplsTunnelTable."
|
|
REFERENCE
|
|
"MPLS Transport Profile (MPLS-TP) Identifiers, RFC 6370."
|
|
::= { mplsTeExtObjects 5 }
|
|
|
|
mplsTunnelExtEntry OBJECT-TYPE
|
|
SYNTAX MplsTunnelExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents additional MPLS-TP-
|
|
specific tunnel configurations."
|
|
INDEX {
|
|
mplsTunnelIndex,
|
|
mplsTunnelInstance,
|
|
mplsTunnelIngressLSRId,
|
|
mplsTunnelEgressLSRId
|
|
}
|
|
::= { mplsTunnelExtTable 1 }
|
|
|
|
MplsTunnelExtEntry ::= SEQUENCE {
|
|
mplsTunnelExtOppositeDirPtr RowPointer,
|
|
mplsTunnelExtOppositeDirTnlValid TruthValue,
|
|
mplsTunnelExtDestTnlIndex MplsTunnelIndex,
|
|
mplsTunnelExtDestTnlLspIndex MplsTunnelInstanceIndex,
|
|
mplsTunnelExtDestTnlValid TruthValue,
|
|
mplsTunnelExtIngressLSRLocalIdValid TruthValue,
|
|
mplsTunnelExtEgressLSRLocalIdValid TruthValue
|
|
}
|
|
|
|
mplsTunnelExtOppositeDirPtr OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object points to the opposite-direction tunnel entry."
|
|
::= { mplsTunnelExtEntry 1 }
|
|
|
|
mplsTunnelExtOppositeDirTnlValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether or not this tunnel uses
|
|
mplsTunnelExtOppositeDirPtr for identifying the opposite-
|
|
direction tunnel information. Note that if this variable
|
|
is set to true, then the mplsTunnelExtOppositeDirPtr should
|
|
point to the first accessible row of the valid opposite-
|
|
direction tunnel."
|
|
DEFVAL { false }
|
|
::= { mplsTunnelExtEntry 2 }
|
|
|
|
mplsTunnelExtDestTnlIndex OBJECT-TYPE
|
|
SYNTAX MplsTunnelIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is applicable only for the bidirectional
|
|
tunnel that has the forward and reverse LSPs in the
|
|
different tunnel entries.
|
|
|
|
The values of this object and the
|
|
mplsTunnelExtDestTnlLspIndex object together can be used
|
|
to identify an opposite-direction LSP, i.e., if the
|
|
mplsTunnelIndex and mplsTunnelInstance hold the value
|
|
for forward LSP, this object and
|
|
mplsTunnelExtDestTnlLspIndex can be used to retrieve
|
|
the reverse-direction LSP and vice versa.
|
|
|
|
This object and mplsTunnelExtDestTnlLspIndex values
|
|
provide the first two indices of tunnel entry, and
|
|
the remaining indices can be derived as follows:
|
|
the Ingress and Egress Identifiers should be
|
|
swapped in order to index the other direction tunnel."
|
|
::= { mplsTunnelExtEntry 3 }
|
|
|
|
mplsTunnelExtDestTnlLspIndex OBJECT-TYPE
|
|
SYNTAX MplsTunnelInstanceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is applicable only for the bidirectional
|
|
tunnel that has the forward and reverse LSPs in the
|
|
different tunnel entries. This object holds
|
|
the instance index of the opposite-direction tunnel."
|
|
::= { mplsTunnelExtEntry 4 }
|
|
|
|
mplsTunnelExtDestTnlValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether or not this tunnel uses
|
|
mplsTunnelExtDestTnlIndex and
|
|
mplsTunnelExtDestTnlLspIndex for identifying
|
|
the opposite-direction tunnel information. Note that if
|
|
this variable is set to true, then the
|
|
|
|
mplsTunnelExtDestTnlIndex and
|
|
mplsTunnelExtDestTnlLspIndex objects should have
|
|
the valid opposite-direction tunnel indices."
|
|
DEFVAL { false }
|
|
::= { mplsTunnelExtEntry 5 }
|
|
|
|
mplsTunnelExtIngressLSRLocalIdValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object denotes whether the mplsTunnelIngressLSRId
|
|
contains the local value that is used to reference
|
|
the complete Ingress Global_ID::Node_ID or ICC_Operator_ID
|
|
from the mplsTunnelExtNodeConfigTable.
|
|
|
|
If this object is set to FALSE, mplsTunnelExtNodeConfigTable
|
|
will not contain an entry to reference the local identifier
|
|
with Global_ID::Node_ID or ICC_Operator_ID::Node_ID value.
|
|
|
|
This object is set to FALSE for legacy implementations like
|
|
MPLS TE tunnels where mplsTunnelIngressId itself provides
|
|
the complete Ingress LSR ID."
|
|
REFERENCE
|
|
"MPLS-TE-STD-MIB (RFC 3812), Section 11.
|
|
mplsTunnelIngressLSRId object in mplsTunnelTable."
|
|
DEFVAL { false }
|
|
::= { mplsTunnelExtEntry 6 }
|
|
|
|
mplsTunnelExtEgressLSRLocalIdValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object denotes whether the mplsTunnelEgressLSRId
|
|
contains the local value, which is used to reference
|
|
the complete Egress Global_ID::Node_ID or
|
|
ICC_Operator_ID::Node_ID from
|
|
the mplsTunnelExtNodeConfigTable.
|
|
|
|
If this object is set to FALSE, mplsTunnelExtNodeConfigTable
|
|
will not contain an entry to reference the local identifier
|
|
with Global_ID::Node_ID or ICC_Operator_ID::Node_ID value.
|
|
|
|
This object is set to FALSE for legacy implementations like
|
|
MPLS TE tunnels where mplsTunnelEgressId itself provides
|
|
the complete Egress LSR ID."
|
|
REFERENCE
|
|
"MPLS-TE-STD-MIB (RFC 3812), Section 11.
|
|
mplsTunnelEgressLSRId object in mplsTunnelTable."
|
|
DEFVAL { false }
|
|
::= { mplsTunnelExtEntry 7 }
|
|
|
|
-- End of MPLS Tunnel table extension
|
|
|
|
-- Module compliance.
|
|
|
|
mplsTeExtCompliances
|
|
OBJECT IDENTIFIER ::= { mplsTeExtConformance 1 }
|
|
|
|
mplsTeExtGroups
|
|
OBJECT IDENTIFIER ::= { mplsTeExtConformance 2 }
|
|
|
|
-- Compliance requirement for fully compliant implementations.
|
|
|
|
mplsTeExtModuleFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for agents that provide full
|
|
support the MPLS-TE-EXT-STD-MIB module."
|
|
|
|
MODULE -- this module
|
|
|
|
-- The mandatory group has to be implemented by all
|
|
-- LSRs that originate/terminate MPLS-TP Tunnels.
|
|
-- In addition, depending on the type of tunnels
|
|
-- supported, other groups become mandatory as
|
|
-- explained below.
|
|
|
|
MANDATORY-GROUPS {
|
|
mplsTunnelExtGroup
|
|
}
|
|
|
|
GROUP mplsTunnelExtIpOperatorGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices that support
|
|
configuration of IP-based identifier tunnels."
|
|
|
|
GROUP mplsTunnelExtIccOperatorGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices that support
|
|
configuration of ICC based tunnels."
|
|
::= { mplsTeExtCompliances 1 }
|
|
|
|
-- Compliance requirement for read-only implementations.
|
|
|
|
mplsTeExtModuleReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for agents that only provide
|
|
read-only support for the MPLS-TE-EXT-STD-MIB module."
|
|
|
|
MODULE -- this module
|
|
|
|
MANDATORY-GROUPS {
|
|
mplsTunnelExtGroup
|
|
}
|
|
|
|
GROUP mplsTunnelExtIpOperatorGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices that support
|
|
configuration of IP-based identifier tunnels."
|
|
|
|
GROUP mplsTunnelExtIccOperatorGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices that support
|
|
configuration of ICC-based tunnels."
|
|
|
|
-- mplsTunnelExtTable
|
|
|
|
OBJECT mplsTunnelExtOppositeDirPtr
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtOppositeDirTnlValid
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtDestTnlIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtDestTnlLspIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtDestTnlValid
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtIngressLSRLocalIdValid
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtEgressLSRLocalIdValid
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtNodeConfigGlobalId
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtNodeConfigNodeId
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtNodeConfigStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtNodeConfigRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtNodeConfigCcId
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtNodeConfigIccId
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsTunnelExtNodeConfigIccValid
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { mplsTeExtCompliances 2 }
|
|
|
|
-- Units of conformance.
|
|
|
|
mplsTunnelExtGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsTunnelExtOppositeDirPtr,
|
|
mplsTunnelExtOppositeDirTnlValid,
|
|
mplsTunnelExtDestTnlIndex,
|
|
mplsTunnelExtDestTnlLspIndex,
|
|
mplsTunnelExtDestTnlValid,
|
|
mplsTunnelExtIngressLSRLocalIdValid,
|
|
mplsTunnelExtEgressLSRLocalIdValid
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Necessary, but not sufficient, set of objects to
|
|
implement tunnels. In addition, depending on the
|
|
operating environment, the following groups are
|
|
mandatory."
|
|
::= { mplsTeExtGroups 1 }
|
|
|
|
mplsTunnelExtIpOperatorGroup OBJECT-GROUP
|
|
OBJECTS { mplsTunnelExtNodeConfigLocalIdNext,
|
|
mplsTunnelExtNodeConfigGlobalId,
|
|
mplsTunnelExtNodeConfigNodeId,
|
|
mplsTunnelExtNodeIpMapLocalId,
|
|
mplsTunnelExtNodeConfigStorageType,
|
|
mplsTunnelExtNodeConfigRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object(s) needed to implement IP-compatible tunnels."
|
|
::= { mplsTeExtGroups 2 }
|
|
|
|
mplsTunnelExtIccOperatorGroup OBJECT-GROUP
|
|
OBJECTS { mplsTunnelExtNodeConfigLocalIdNext,
|
|
mplsTunnelExtNodeConfigCcId,
|
|
mplsTunnelExtNodeConfigIccId,
|
|
mplsTunnelExtNodeConfigNodeId,
|
|
mplsTunnelExtNodeConfigIccValid,
|
|
mplsTunnelExtNodeIccMapLocalId,
|
|
mplsTunnelExtNodeConfigStorageType,
|
|
mplsTunnelExtNodeConfigRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object(s) needed to implement ICC-based tunnels."
|
|
::= { mplsTeExtGroups 3 }
|
|
|
|
-- MPLS-TE-EXT-STD-MIB module ends
|
|
END
|